Parts Manual. Rotary Cutter RCFM4014 (1000 RPM) Copyright 2017 Printed 07/21/ P

Size: px

Start display at page:

Paula Hill
5 years ago
Views:

without exception. Your life and the lives of others depend on it!

1 Parts Manual RCFM4014 (1000 RPM) Rotary Cutter Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! Cover illustration may show optional equipment not supplied with standard unit. Copyright 2017 Printed 07/21/ P

2 Table of Contents Section 1: Introduction...4 Using This Manual...4 Manual Replacement Information...4 Manual Revisions...4 Touch-up Paint...4 Hardware Legend...5 Replacement Hardware...5 Serial Numbers...5 Part Number Service Coding...5 Section 2: Deck, Hitch and Gauge Wheel...6 Breakaway Lights...6 Deck & Hitch Components...8 Gauge Wheel Components...10 Section 3: Drive Blade (1000 RPM)...12 Blade Drive...12 Directional Coupler Components B Directional Coupler Components B Driveline Intermediate ( C)...18 Driveline Intermediate ( C)...20 Driveline Main ( C)...22 Driveline Main ( C)...24 Gearbox 1000 RPM LH & RH ( C)...26 Gearbox Center ( C)...28 Section 4: Guards...30 Guard Chain Front...30 Guard Chain Rear...32 Guard Metal Rear...34 Guard Rubber Front...36 Guard Rubber Rear...38 Section 5: Decals...40 Decal Placement...40 Section 6: Options & Accessories...42 Blade Carrier Kit...42 Breakaway Lights Retro-Fit ( A)...44 Shredder Kit 30" Rows...46 Shredder Kit 38" and 40" Rows...48 Shredder Kit W/O Fixed Blades Copyright 2017 All rights reserved Printed 07/21/17 Great Plains Manufacturing, Inc. provides this publication as is without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. Great Plains Manufacturing, Incorporated Trademarks The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains All other brands and product names are trademarks or registered trademarks of their respective holders. Printed in the United States of America P /21/17

3 Alphabetized Table of Contents Selected Models B Blade Carrier Kit...42 Blade Drive...12 Breakaway Lights...6 Breakaway Lights Retro-Fit ( A)...44 D Decal Placement...40 Deck & Hitch Components...8 Directional Coupler Components B Directional Coupler Components B Driveline Intermediate ( C)...18 Driveline Intermediate ( C)...20 Driveline Main ( C)...22 Driveline Main ( C)...24 G Gauge Wheel Components...10 Gearbox 1000 RPM LH & RH ( C)...26 Gearbox Center ( C)...28 Guard Chain Front...30 Guard Chain Rear...32 Guard Metal Rear...34 Guard Rubber Front...36 Guard Rubber Rear...38 S Shredder Kit 30" Rows...46 Shredder Kit 38" and 40" Rows...48 Shredder Kit W/O Fixed Blades /21/ P

4 P /21/17

5 07/21/ P

6 Breakaway Lights Table of Contents P /21/17

7 Breakaway Lights Section 2: Deck, Hitch and Gauge Wheel Ref. Part No. Part Description Comments Revision Dwg L A H H D D D C C C C C C C C C C C C C C C C C C J-37-R J-37-A J-AC1-15-B C J-37-R J-37-A J-AC1-15-B C C C C Image No BREAKAWAY LIGHT KIT 4014 BREAKAWAY LIGHT KIT * LIGHT BRACKET MNT BREAKAWAY LIGHT MOUNT WDMNT HOSE HOLDER BRACKET 45DEG LIGHT PIVOT BAR SPRING BUSHING CABLE TIE.19X DIA 50LB HHCS 3/8-16X1 GR5 HHCS 1/2-13X1 3/4 GR5 HHCS 1/4-20X2 GR5 HHCS 3/4-10X1 1/2 GR5 HHCS 1/4-20X1 1/4 GR5 NUT LOCK 1/4-20 PLT NUT LOCK 3/8-16 PLT NUT LOCK 3/4-10 PLT NUT HEX JAM 1-8 PLT NUT HEX 1-8 PLT NUT HEX FLG LOCK 1/2-13 PLT WASHER FLAT 1/4 SAE PLT WASHER FLAT 3/8 SAE PLT WASHER FLAT 1 SAE SPRING HOSE LOOP SPRING COMP 1.4OD.162W 3LG DUAL LED LIGHT LH RED LED LENS MODULE AMBER LED LENS MODULE BLACK LENS COVER DUAL LED LIGHT RH RED LED LENS MODULE AMBER LED LENS MODULE BLACK LENS COVER RH LIGHT WIRE HARNESS 8' LH LIGHT WIRE HARNESS 8' ENHANCE MODULE LEAD WIRE HARNESS 8' S/N D001092N+ Lights are standard (Complete assembly) S/N D001091N- Lights were optional Complete light assembly Red lens Amber lens Black lens Complete light assembly Red lens Amber lens Black lens 07/21/ P

8 Deck & Hitch Components P /21/17

9 Deck & Hitch Components Section 2: Deck, Hitch and Gauge Wheel Ref. Part No. Part Description Comments Revision Dwg D D H H D H H H H D D D N/A N/A C C C C C C C C N/A C C C C C N/A C C C C C N/A C C C C C C C C S C C C C C C C Drawing Image Number HITCH PIN CAT. II & III BSHG 1 1/4ODX1 1/32IDX2 1/16LG A-FRAME LH A-FRAME RH HITCH MOUNT BSHG 4014 DECK WELDMENT - GREEN REAR BRACE REAR VERTICAL BRACE FLOATING TOP LINK HITCH TUBE SKID SHOE REAR BRACE STRAIGHT LONG HHCS 3/4-10X2 GR5 HHCS 3/4-10X3 1/2 GR5 HHCS 3/4-10X4 GR5 HHCS 1-8X4 1/2 GR5 HHCS 1-8X5 1/2 GR5 HHCS 1/4-20X1 1/4 GR5 PLOW 3/8-16X1 GR5 HHCS 7/8-9X2 1/2 GR5 NUT LOCK 3/4-10 PLT NUT NY-LOK 7/8-9 PLT NUT HEX 1-8 NYLON INSERT PLT NUT HEX TOP LOCK 1-8 PLT NUT HEX WHIZ 3/8-16 PLT NUT HEX NYLOCK 1/4-20 WASHER FLAT 1/4 SAE PLT WASHER FLAT 3/4 SAE PLT WASHER FLAT 7/8 SAE PLT WASHER FLAT 1 SAE PIN, HAIR COTTER 3/16 WIRE DIA PIN LINCH 7/16 X 1 3/4 PIN CLVS 1.0X3.38 USBL MANUAL STORAGE CONTAINER PLUG LP 3" ID RUBBER BSHG 1OD X 11GW X.56 BUSHING 1OD X 11GWL X 2.56 BUSHING 1OD X 11GWL X 3.06 DRIVELINE HOLDER W/ HARDWARE HHCS 5/16-18X1 1/4 GR5 HHCS 5/16-18X2 1/4 GR5 NUT HEX LOCK 5/16-18 FLG. WASHER FLAT 5/16 SAE PLT SPRING TORSION DRIVELINE HLDER DRIVELINE HOOK MOUNT DRIVELINE HOOK 07/21/ P

10 Gauge Wheel Components P /21/17

11 Gauge Wheel Components Section 2: Deck, Hitch and Gauge Wheel Ref. Part No. Part Description Comments Revision Dwg H H L H V D D D C C C C C C C C C C C C C C C C C C C C C C C HT250 Drawing Image Number ADJ YOKE 21" LAM ADJ COLLAR 21" RIGID TAIL WHEEL 14' RIGID TRAILING ARM 5-BOLT HUB COMPLETE TAILWHEEL WASHER TOP COLLAR TUBE CLAMP 4" GREASE ZERK STRAIGHT 1/4-28 GREASE ZERK 1/4-28 THD FORMING HHCS 1/2-13X3 GR5 HHCS 5/8-11X1 3/4 GR5 HUB STUD 1/2-20X1.88 GR5 HHCS 3/8-16X3 1/4 GR8 NUT LOCK 1/2-13 PLT NUT LOCK 5/8-11 PLT NUT HEX SLOTTED 7/8-14 PLT NUT LOCK 3/8-16 NYLON INSERT NUT HEX 1/2-20 X 5/8 HIGH WASHER FLAT 5/8 SAE PLT PIN COTTER 3/16 X 2 TIRE & WHL LAM. 6X9X21(5-BOLT) HUB 5-BOLT W/CUPS/STUDS SPINDLE, BOLT ON 7/8-14 HUB SPACER OIL SEAL DBL LIP BORE SEAL 1.75ID CR17617 BRG CUP LM BRG CONE 1.25ID LM BRG CUP LM BRG CONE LM MACHINED 5-BOLT HUB 07/21/ P

12 Blade Drive Table of Contents P /21/17

13 Blade Drive Table of Contents Section 3: Drive Blade (1000 RPM) Ref. Part No. Part Description Comments Revision Dwg H H H H D D D C C C C C C C C C C C C C C C C C C C Drawing Image Number LARGE SHIELD BRACKET WLDMT M10 LARGE SHIELD BRACKET WLDMT M10 LARGE SHIELD BRACKET WLDMT LARGE SHIELD BRACKET WLDMT 4014 PTO CONE LARGE OUTER SHIELD 4014 SHIELD CLAMP HHCS 3/4-10X2 1/2 GR5 HHCS M10X1.5X20 GR8.8 THD-LCK NUT HEX FLG TOP LK 3/4-10 PLT WASHER LOCK SPRING 5/16 PLT WASHER FLAT 3/8 SAE PLT WASHER LOCK 7/16 PLT WASHER LOCK SPRING 1/2 PLT WASHER FLAT 5/16 SAE PLT KNOB 1/2-13 MALE THD 2 3/8OD GBOX RCM50 1:1.21 STD COMER U DIPSTICK DRV 1.38 Z21 SC 39.7 CAT 5 DRV 1.75 Z20 SC 39.7 CAT 5 INT DRV CAT CW RCM CENTER GBOX 1.22:1 COMER DIPSTICK INT DRV CAT CCW HHCS M8X1.25X20 GR8.8 THD-LCK HHCS M10X1.5X25 GR8.8 THD-LCK 1 3/8 X Z21 SPLINE 1 3/4 X Z20 SPLINE 07/21/ P

14 Directional Coupler Components B P /21/17

15 Section 3: Drive Blade (1000 RPM) Directional Coupler Components B6502 Ref. Part No. Part Description Comments Revision Dwg B6502 B3728 Y10 B6532 B6523 B6524 B6528 B503_BA B6534 B3727 Drawing Image Number BARE-CO DIRECTIONAL CPLR CW * BARE-CO COTTER BOLT BARE-CO 1/2X3-1/4 UNF G8 BOLT BARE-CO 1-3/4 20 SPLINE BASE BARE-CO SPACING COLLAR BARE-CO OUTER SPIDER PLATE BARE-CO SPIDER 1-3/4 20 SPL CW BAARE-CO BRG 1-3/4 20 SPL BARE-CO BRG HSG 1-3/4 20 SPL BARE-CO DRIVE SPRING Used with C LH side. Complete assembly 07/21/ P

16 Directional Coupler Components B P /21/17

17 Section 3: Drive Blade (1000 RPM) Directional Coupler Components B6503 Ref. Part No. Part Description Comments Revision Dwg B6503 B3728 Y10 B6532 B6523 B6524 B6537 B503_BA B6534 B3727 Drawing Image Number BARE-CO DIRECTIONAL CPLR CCW * BARE-CO COTTER BOLT BARE-CO 1/2X3-1/4 UNF G8 BOLT BARE-CO 1-3/4 20 SPLINE BASE BARE-CO SPACING COLLAR BARE-CO OUTER SPIDER PLATE BARE-CO SPDR 1-3/4 20 SPL CCW BAARE-CO BRG 1-3/4 20 SPL BARE-CO BRG HSG 1-3/4 20 SPL BARE-CO DRIVE SPRING Use with C RH side. Complete assembly 07/21/ P

18 Driveline Intermediate ( C) P /21/17

19 Driveline Intermediate ( C) Section 3: Drive Blade (1000 RPM) Ref. Part No. Part Description Comments Revision Dwg C A A824 A8263 A634 A544 A8254 A A1090 YB821 B6502 Drawing Image Number INT DRV CAT CW * BARE-CO 1-3/4X20 SPL Q.R. YOKE BARE-CO CROSS BEARING BARE-CO OUTER TUBE YOKE BARE-CO OUTER TUBE BARE-CO INNER TUBE BARE-CO INNER TUBE YOKE BARE-CO 1-3/4X20 SPL CLMP YOKE BARE-CO ROLL PIN BARE-CO GREASE NIPPLE BARE-CO DIRECTIONAL CPLR CW Left side complete assembly 07/21/ P

20 Driveline Intermediate ( C) P /21/17

21 Driveline Intermediate ( C) Section 3: Drive Blade (1000 RPM) Ref. Part No. Part Description Comments Revision Dwg C A A824 A8263 A634 A544 A8254 A A1090 YB821 B6503 Drawing Image Number INT DRV CAT CCW * BARE-CO 1-3/4X20 SPL Q.R. YOKE BARE-CO CROSS BEARING BARE-CO OUTER TUBE YOKE BARE-CO OUTER TUBE BARE-CO INNER TUBE BARE-CO INNER TUBE YOKE BARE-CO 1-3/4X20 SPL CLMP YOKE BARE-CO ROLL PIN BARE-CO GREASE NIPPLE BARE-CO DIRECTIONAL CPLR CCW Right side complete assembly 07/21/ P

22 Driveline Main ( C) P /21/17

23 Driveline Main ( C) Section 3: Drive Blade (1000 RPM) Ref. Part No. Part Description Comments Revision Dwg Drawing Image Number C DRV 1.38 Z21 SC 39.7 CAT 5 * CO COMPLETE COLLAR YOKE C COMER CROSS ASSEMBLY COMER YOKE OUTER COMER OUTER TUBE ROLL PIN CO OUTER TUBE WITH LABEL RPBY COMER INNER TUBE RPBY COMER ROLL PIN FOR INNER TUBE COMER INNER YOKE COMER CLUTCH, DISC COMPLETE COMER RETAINING COLLER INNER COMER BOLT COMER RETAINING COLLER INNER N/A CO GUARD W/ INSTRUCTION MANUAL COMER SPRING COMER YOKE, FLANGED COMER BUSH COMER LINING RING COMER TAPERED PIN SET 1 3/ COMER CLUTCH SUPPORT COMER INNER PLATE COMER INTERMEDIATE PLATE COMER PRESSURE PLATE COMER BOLT WITH NUT M10X100 N/A CO U JOINT FOR OUTER TUBE N/A CO U JOINT FOR INNER TUBE CO HALF FEMALE GUARD CO HALF MALE GUARD CO HALF FEMALE SHFT W/GUARDING CO HALF MALE SHAFT W/GUARDING COMER DANGER LABEL OUTER TUBE COMER DANGER LABEL GUARD OUTER COMER CAP OUTER TUBE, PLASTIC COMER INNER CAP COMER COLLER KIT 3/8 YOKE Complete assembly 07/21/ P

24 Driveline Main ( C) P /21/17

25 Driveline Main ( C) Section 3: Drive Blade (1000 RPM) Ref. Part No. Part Description Comments Revision Dwg Drawing Image Number C DRV 1.75 Z20 SC 39.7 CAT 5 * CO COMPLETE COLLAR YOKE C COMER CROSS ASSEMBLY COMER YOKE OUTER COMER OUTER TUBE ROLL PIN CO OUTER TUBE WITH LABEL COMER INNER TUBE COMER ROLL PIN FOR INNER TUBE COMER INNER YOKE COMER CLUTCH, DISC COMPLETE COMER RETAINING COLLER INNER COMER BOLT COMER RETAINING COLLER INNER N/A CO GUARD W/ INSTRUCTION MAN COMER SPRING COMER YOKE, FLANGED COMER BUSH COMER LINING RING COMER TAPERED PIN SET 1 3/ COMER CLUTCH SUPPORT COMER INNER PLATE COMER INTERMEDIATE PLATE COMER PRESSURE PLATE COMER BOLT WITH NUT M10X100 N/A CO U JOINT FOR OUTER TUBE N/A CO U JOINT FOR INNER TUBE CO HALF FEMAL GUARD CO HALF MALE GUARD CO HALF FEMALE SHFT W/GUARDING CO HALF MALE SHAFT W/GUARDING COMER DANGER LABEL OUTER TUBE COMER DANGER LABEL GUARD OUTER COMER CAP OUTER TUBE, PLASTIC COMER INNER CAP COMER YOKE KIT COLLAR Complete assembly 07/21/ P

26 Gearbox 1000 RPM LH & RH ( C) P /21/17

27 Section 3: Drive Blade (1000 RPM) Gearbox 1000 RPM LH & RH ( C) Ref. Part No. Part Description Comments Revision Dwg Drawing Image Number C GBOX RCM :1.21 CCW * U NA U CO CROWN GEAR Z22 M CO BEARING RTA CO OIL SEAL 45 X 85 X 10 U CO INPUT SHAFT 1 3/4" CO SNAP RING UNI CO SHIM CO SNAP RING 50 UNI7435 U CO CASTLE NUT CO SHIM 50.3X CO BEARING CO SEAL PROTECTOR CO OIL SEAL 60X110X CO BEARING U CO OUTPUT SHAFT CO COTTER PIN B 5X CO CAP CO BLANK WASHER CO SHIM 45.3X CO SHIM 40.3 X 61.7 X 1 U CO COVER CO BOLT M8X22 HHB C COMER U OIL PLUG CO OIL PLUG 3/ CO COTTER PIN B6X70 SLD-SPRTLY CO CASTLE NUT M36X3 U CO CROWN GEAR Z18 M7.8 * Notes: Oil Type 80-90W Capacity 10 Pints Complete assembly 07/21/ P

28 Gearbox Center ( C) P /21/17

29 Gearbox Center ( C) Section 3: Drive Blade (1000 RPM) Ref. Part No. Part Description Comments Revision Dwg Drawing Image Number CO 1" 3/4 Z20 OUTPUT SHAFT RPBY CO BOLTS M10X30 HHB (10.9) CO COVER CO RL BRG (45X100X27.25) RPBY A CO GEAR PINION Z22 M CO BLANK WASHER CO CASTLE NUT M36X RPBY A RPBY A RPBY N/A CO BRG (60X110X23.75) CO OIL SEAL (60X110X12) CO SEAL PROTECTOR CO OUTPUT SHAFT CO COTTER PIN B 5X CO NUT M40X CO PLUG 1/2" GAS CO RLR BRG (50X11X42.25) CO COVER CO 1" 3/4 Z20 INTPUT SHAFT CO DUST LIP (55X90X10) CO BRG (50X90X24.75) CO COTTER PIN B6X70 SLD-SPRTLY CO GEAR CROWN Z18 M CO SPACER (40.1X60X23.4) CO 1/2 GAS/OIL BREATHER PLUG U N/A 07/21/ P

30 Guard Chain Front P /21/17

31 Section 4: Guards Guard Chain Front Ref. Part No. Part Description Comments Revision Dwg A D L L D C C C Drawing Image Number 14' FNT CHAIN GUARD ASSY * ROUND ROD 1/4 X 93 1/4 14' FNT CHAIN GRD SUB RH ASSY 14' FNT CHAIN GRD SUB LH ASSY FRNT CHAIN GUARD BRACKET HHCS 1/2-13X3 1/2 GR5 NUT HEX WHIZ 1/2-13 PLT CHAIN WELD 5/16 GR 43 X 5 LINK Complete assembly 07/21/ P

32 Guard Chain Rear Table of Contents P /21/17

33 Section 4: Guards Guard Chain Rear Ref. Part No. Part Description Comments Revision Dwg A D L L D C C C Drawing Image Number 14' REAR CHAIN GUARD ASSY * ROUND ROD 1/4 X 73 14' REAR LH CHAIN GUARD ASSY 14' REAR RH CHAIN GUARD ASSY REAR CHAIN GUARD BRACKET RHSNB 1/2-13X1 1/4 GR5 NUT HEX WHIZ 1/2-13 PLT CHAIN WELD 5/16 GR 43 X 5 LINK Complete assembly 53 Chains 52 Chains 07/21/ P

34 Guard Metal Rear Table of Contents P /21/17

35 Section 4: Guards Guard Metal Rear Ref. Part No. Part Description Comments Revision Dwg A D D D C C C C C Drawing Image Number 14' REAR METAL GUARD ASSY 14' REAR METAL GUARD METAL GUARD BRACKET LH METAL GUARD BRACKET RH RHSNB 1/4-20X3/4 GR5 RHSNB 1/2-13X1 1/2 GR5 RHSNB 1/2-13X1 GR5 NUT HEX WHIZ 1/2-13 PLT NUT HEX FLANGE 1/4-20 PLT 07/21/ P

36 Guard Rubber Front P /21/17

37 Section 4: Guards Guard Rubber Front Ref. Part No. Part Description Comments Revision Dwg A L D D C C C C C Drawing Image Number 14' FNT RUBBER GUARD ASSY * 14' FNT RUBBER GUARD SUB ASSY FNT RUBBER GUARD MOUNT FNT RUBBER GUARD RETAINER RHSNB 3/8-16X1 GR5 HHCS 1/2-13X3 1/2 GR5 NUT HEX WHIZ 1/2-13 PLT NUT HEX WHIZ 3/8-16 PLT 14' FRNT RUBBER GUARD Complete assembly 07/21/ P

38 Guard Rubber Rear P /21/17

39 Section 4: Guards Guard Rubber Rear Ref. Part No. Part Description Comments Revision Dwg A A D C C C Drawing Image Number 14' REAR RUBBER GUARD ASSY * 14' REAR RUBBER GUARD ASSY RUBBER GUARD BRACKET RHSNB 1/2-13X1 1/2 GR5 NUT HEX WHIZ 1/2-13 PLT 14' REAR RUBBER GUARD Complete assembly 07/21/ P

40 Decal Placement Table of Contents P /21/17

41 Section 5: Decals Decal Placement Ref. Part No. Part Description Comments Revision Dwg C C C C C C C C C C C C C C C C C C C Drawing Image Number DECAL DANGER PTO DRIVELINE EN DECAL FLAG DECAL AMBER REFLECTOR DECAL CAUTION 1000 RPM DECAL DANGER PD GUARD MISS SML DECAL DANGER PTO DRIVELINE DECAL DANGER THROWN OBJ CUTTER DECAL DANGER ROTATING BLADES DECAL NOTICE - 20 MPH MAX (FORM) DECAL DANGER CRUSHING TWO IMP DECAL SAFETY COMBO SUNWEST DECAL 5 YEAR GEARBOX WARRANTY DECAL ROTATION ARROW CW DECAL ROTATION ARROW CCW DECAL REFLECTOR ORANGE 2X9 DECAL REFLECTOR RED 2X9 DECAL REFLECTOR AMBER 2X9 DECAL RCFM4014 GREAT PLAINS DECAL GREATPLAINS 25" CTR LOGO 07/21/ P

42 Blade Carrier Kit Table of Contents P /21/17

43 Blade Carrier Kit Section 6: Options & Accessories Ref. Part No. Part Description Comments Revision Dwg H C C C C C A Drawing Image Number 3610 DISHPAN BLD BLT 1 1/8-12X3.44 W/.25KEY NUT HEX TOP LOCK 1 1/8-12 PLT WASHER FLAT 1 HARD ASTMF436 PN CUTTER BLADE 1/2X4X23 CCW CUTTER BLADE 1/2X4X23 CW BLADE BOLT KIT 07/21/ P

44 Breakaway Lights Retro-Fit ( A) P /21/17

45 Section 6: Options & Accessories Breakaway Lights Retro-Fit ( A) Ref. Part No. Part Description Comments Revision Dwg L M H H D D D C C C C C C C C C C C C C C C C C C J-37-R J-37-A J-AC1-15-B C J-37-R J-37-A J-AC1-15-B C C C C Image No BREAKAWAY LIGHT KIT ROTARY CUTTER LIGHT KIT MANUAL * LIGHT BRACKET MNT BREAKAWAY LIGHT MOUNT WDMNT HOSE HOLDER BRACKET 45DEG LIGHT PIVOT BAR SPRING BUSHING CABLE TIE.19X DIA 50LB HHCS 3/8-16X1 GR5 HHCS 1/2-13X1 3/4 GR5 HHCS 1/4-20X2 GR5 HHCS 3/4-10X1 1/2 GR5 HHCS 1/4-20X1 1/4 GR5 NUT LOCK 1/4-20 PLT NUT LOCK 3/8-16 PLT NUT LOCK 3/4-10 PLT NUT HEX JAM 1-8 PLT NUT HEX 1-8 PLT NUT HEX FLG LOCK 1/2-13 PLT WASHER FLAT 1/4 SAE PLT WASHER FLAT 3/8 SAE PLT WASHER FLAT 1 SAE SPRING HOSE LOOP SPRING COMP 1.4OD.162W 3LG DUAL LED LIGHT LH RED LED LENS MODULE AMBER LED LENS MODULE BLACK LENS COVER DUAL LED LIGHT RH RED LED LENS MODULE AMBER LED LENS MODULE BLACK LENS COVER RH LIGHT WIRE HARNESS 8' LH LIGHT WIRE HARNESS 8' ENHANCE MODULE LEAD WIRE HARNESS 8' Complete Assembly Light kit manual Complete light assembly Red lens Amber lens Black lens Complete light assembly Red lens Amber lens Black lens 07/21/ P

46 Shredder Kit 30" Rows P /21/17

47 Shredder Kit 30" Rows Section 6: Options & Accessories Ref. Part No. Part Description Comments Revision Dwg D H S S H H D D C C C C C C C C C C C C C C C C C Drawing Image Number BLADE BUSHING BLADE BAR, SHREDDER RCFM4014 CCW BLADES, SHREDDER 58" CW BLADES, SHREDDER 58" FIXED BLADE MNT RH OFFSET FIXED BLADE MNT LH OFFSET REAR BAFFLE RH DOUBLER PLATE WASHER HHCS 3/4-10X2 GR5 HHCS 1/2-13X1 3/4 GR5 RHSNB 1/2-13X1 1/2 GR5 RHSNB 1/2-13X1 1/4 GR5 HHCS 1-8X4 1/2 PLT GR8 RHSNB 1/2-13X4 GR5 PLT NUT LOCK 1/2-13 PLT NUT HEX 1/2-13 PLT NUT HEX WHIZ 1/2-13 PLT NUT HEX TOP LOCK 1-8 PLT NUT HEX FLG TOP LK 3/4-10 PLT WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1/2 USS PLT CUTTER BLADE 1/2X4X23 CCW CUTTER BLADE 1/2X4X23 CW CUTTER BLADE 1/2X4X22.5 FLAT CUTTER BLADE 1/2X4X10.25C FLAT 07/21/ P

48 Shredder Kit 38" and 40" Rows P /21/17

49 Shredder Kit 38" and 40" Rows Section 6: Options & Accessories Ref. Part No. Part Description Comments Revision Dwg D H S S H H H D D D D C C C C C C C C C C C C C C C C C C Drawing Image Number BLADE BUSHING BLADE BAR, SHREDDER RCFM4014 CCW BLADES, SHREDDER 58" CW BLADES, SHREDDER 58" FIXED BLADE MNT RH OFFSET FIXED BLADE MNT LH OFFSET OFFSET FIXED BLADE MNT RH REAR BAFFLE RH FRONT BAFFLE LH BLADE MNT DOUBLER PLATE DOUBLER PLATE WASHER HHCS 3/4-10X2 GR5 HHCS 1/2-13X1 3/4 GR5 RHSNB 1/2-13X1 1/2 GR5 RHSNB 1/2-13X1 1/4 GR5 RHSNB 1/2-13X1 3/4 GR5 HHCS 1-8X4 1/2 PLT GR8 RHSNB 1/2-13X4 GR5 PLT NUT LOCK 1/2-13 PLT NUT HEX 1/2-13 PLT NUT HEX WHIZ 1/2-13 PLT NUT HEX TOP LOCK 1-8 PLT NUT HEX FLG TOP LK 3/4-10 PLT WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1/2 USS PLT CUTTER BLADE 1/2X4X23 CCW CUTTER BLADE 1/2X4X23 CW CUTTER BLADE 1/2X4X22.5 FLAT CUTTER BLADE 1/2X4X10.25C FLAT 07/21/ P

50 Shredder Kit W/O Fixed Blades P /21/17

51 Shredder Kit W/O Fixed Blades Section 6: Options & Accessories Ref. Part No. Part Description Comments Revision Dwg D H S S D D C C C C C C C C C Drawing Image Number BLADE BUSHING BLADE BAR, SHREDDER RCFM4014 CCW BLADES, SHREDDER 58" CW BLADES, SHREDDER 58" REAR BAFFLE RH FRONT BAFFLE LH RHSNB 1/2-13X1 1/4 GR5 HHCS 1-8X4 1/2 PLT GR8 NUT HEX 1/2-13 PLT NUT HEX TOP LOCK 1-8 PLT WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1/2 USS PLT CUTTER BLADE 1/2X4X23 CCW CUTTER BLADE 1/2X4X23 CW CUTTER BLADE 1/2X4X22.5 FLAT 07/21/ P

52 The is a numeric index of all part numbers included in this manual. The index shows what page(s) the part is used on. Part Number Page Part Number Page Part Number Page Part Number Page , , , , , , , , , , , , , , , , , , , , , , , , , , , , , D D D...47, 49, D A H H H D D H H H A A A L L A L A L L H...47, 49, S...47, 49, S...47, 49, H...47, H...47, H H H H H...7, H...7, A L H V H H H H D L...7, S D D D D D D D D D D D D...47, 49, D...49, D D D...7, D...7, D...7, D D D D...47, D M , , , , , , C C...7, C C C C C...7, C C...31, C C...9, 47, C C C...7, 45, 47, C C...35, 39, 47, C C...7, C C...7, C C C...33, 47, 49, C...7, 9, C C C C C...47, 49, C...47, C C C C...7, C...7, C...11, 47, C...47, 49, C C...7, 9, C C C...7, C...7, C... 31, 33, 35, 37, 39, 47, C C C...9, 47, 49, C...7, C C C...9, C C C...13, 47, C C...7, 9, C C...7, 13, C C...13, 47, 49, C...47, 49, C C C C...7, 9, C...9, C C C C C C...7, C...7, C C C C C C C C C C C C C C C C C C C C C C C C...43, 47, 49, C...43, 47, 49, C...47, 49, C...47, C C C C C...13, C...13, C...13, C...13, C...13, C C C...13, C C C C C C C C C C C C C...31, C C C C...7, C...7, C...7, P /21/17

53 (continued) Part Number Page C...7, C...7, C...7, 45 A , 21 A , 21 A , 21 A , 21 A , 21 A , 21 A , 21 A , 21 B , 17 B , 17 B503_BA...15, 17 B , 19 B , 21 B , 17 B , 17 B B , 17 B , 17 B Dwg Dwg Dwg Dwg Dwg Dwg Dwg Dwg Dwg Dwg Dwg Dwg Dwg Dwg Dwg Dwg Dwg Dwg Dwg Dwg , 45 Dwg Dwg HT J-37-A...7, 45 J-37-R...7, 45 J-AC1-15-B...7, 45 N/A...9, 23, 25, 29 U U U U U U U U Y , 17 YB , 21 07/21/ P

54 Great Plains Mfg., Inc E. North Street Salina, Kansas USA

Rotary Cutter RCF3660 & RCF P Parts Manual. Copyright 2018 Printed 07/10/18

Rotary Cutter RCF3660 & RCF P Parts Manual. Copyright 2018 Printed 07/10/18 Rotary Cutter & 30387 326-246P Parts Manual Read the Operator's Manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and