Parts Manual HB40/25. Hipper Bedder. Copyright 2017 Printed 06/28/ P

Transcription

1 Table of Contents Parts Manual Hipper Bedder HB40/25 Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! Cover illustration may show optional equipment not supplied with standard unit. Copyright 2017 Printed 06/28/ P

2 Table of Contents Table of Contents Section 1: Introduction...4 Using This Manual...4 Manual Replacement Information...4 Manual Revisions...4 Touch-up Paint...4 Hardware Legend...5 Replacement Hardware...5 Serial Numbers...5 Part Number Service Coding...5 Frame...6 Mainframe HB Mainframe HB Wings HB Gauge Wheel...12 Lights HB25 (S/N D1001G -)...14 Lights HB25 (S/N D1002G +)...16 Lights HB40 (S/N D1005F -)...18 Lights HB40 (S/N D1006F+)...20 HB Row Units...22 Row Units...22 Row Unit Gang Assemblies...24 Scraper Assembly...26 Hydraulics...28 Hydraulic Cylinder...28 Wing Hydraulics Copyright 2017 All rights reserved Printed 06/28/17 Great Plains Manufacturing, Inc. provides this publication as is without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. Great Plains Manufacturing, Incorporated Trademarks The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains All other brands and product names are trademarks or registered trademarks of their respective holders. Printed in the United States of America P /28/17

3 Table of Contents Alphabetized Table of Contents Selected Models G Gauge Wheel...12 H Hydraulic Cylinder...28 L Lights HB25 (S/N D1001G -)...14 Lights HB25 (S/N D1002G +)...16 Lights HB40 (S/N D1005F -)...18 Lights HB40 (S/N D1006F+)...20 M Mainframe HB Mainframe HB R Row Unit Gang Assemblies...24 Row Units...22 S Scraper Assembly...26 W Wing Hydraulics...30 Wings HB /28/ P

4 Table of Contents P /28/17

5 Table of Contents 06/28/ P

6 Mainframe HB25 (Applies to HB25 only) Table of Contents P /28/17

7 Table of Contents Frame Mainframe HB25 (Applies to HB25 only) Ref. Part No. Part Description Comments Revision dwg H H H H H H H H C C C C C C C C C C C H H C C C C C C C C C H C C C C C C C C C Image No. 9 ROW LISTER/CULT FRAME 9 ROW LISTER/CULT FRAME 30 CAT 4-4N BOLT ON HITCH CAT 4-4N BOLT ON HITCH 8 ROW CAT 3N-4W REAR HITCH CLAMP WLD LIGHT BRACKET MOUNT WELDMENT CAT 3 WIDE BUSHING WELDMENT STACK FOLD PARKING STAND PIN HTCH.75X4.25 USBL W/PIN HHCS 3/4-10X9 GR5 WASHER LOCK SPRING 3/4 PLT PIN HTCH 1.25X4.50 USBL PIN CLVS 1.75X4.38 USBL U-BOLT 5/8-11 X 7 1/32 X 8 1/2 NUT HEX 5/8-11 PLT WASHER LOCK SPRING 5/8 PLT U-BOLT 3/4-10 X 4 1/32 X 7 1/2 NUT HEX FLANGE LOCK 3/4-10 PLT U-BOLT 3/4-10 X 7 X 8 1/2 PIN HITCH 2 X 12 7/8 PLT CAT 4N LOWER HITCH PIN SPACER HHCS 3/4-10X8 GR5 PLT NUT HEX 3/4-10 PLT WASHER FLAT 3/4 HARD ASTMF436 DECAL SLOW MOVING-GALV. BACKED HHCS 1/4-20X1/2 GR5 WASHER FLAT 1/4 SAE PLT WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT HHCS 3/4-10X2 3/4 GR5 CAT 3 HITCH PIN SUPPORT SPACER PIN HTCH 1.44X8.88 USBL PIN HAIR COTTER.243 WIRE PLT DECAL DANGER CRUSH TRCTR & 3PT DECAL GP&LOGO HARVEST/3X20 STR DECAL CAUTION OPERATIONAL MACH DECAL DANGER CANNOT READ ENG DECAL REFLECTOR AMBER 1 1/2X9 DECAL HB25 DECAL REFLECTOR RED 1 1/2X9 Wide Frame Narrow Frame (not shown) Wide Frame (Not Shown) 06/28/ P

8 Mainframe HB40 (Applies to HB40 only) Table of Contents P /28/17

9 Table of Contents Frame Mainframe HB40 (Applies to HB40 only) Ref. Part No. Part Description Comments Revision dwg H H C C H C C H C C C C C C H C C C C H C C C C C C C C C C C C C H C C C Image No. 40FT STACK TOOLBAR CTR FRAME CAT 4-4N BOLT ON HITCH PIN HTCH 1.44X8.88 USBL PIN HAIR COTTER.243 WIRE PLT PIN HITCH 2 X 12 7/8 PLT PIN HTCH.75X4.25 USBL W/PIN PIN, HAIR COTTER 3/16 WIRE DIA STACK FOLD PARKING STAND NUT HEX FLANGE LOCK 3/4-10 PLT HHCS 3/4-10X8 GR5 PLT HHCS 3/4-10X9 GR5 U-BOLT 3/4-10 X 7 X 8 1/2 NUT HEX 1/4-20 PLT DECAL SLOW MOVING-GALV. BACKED CAT 3N-4W REAR HITCH CLAMP WLD PIN HTCH 1.25X4.50 USBL PIN CLVS 1.75X4.38 USBL NUT HEX 3/4-10 PLT HHCS 3/4-10X2 3/4 GR5 CAT 3 WIDE BUSHING WELDMENT WASHER LOCK SPRING 3/4 PLT U-BOLT 3/4-10 X 4 1/32 X 7 1/2 HHCS 1/4-20X1/2 GR5 WASHER FLAT 1/4 SAE PLT WASHER LOCK SPRING 1/4 PLT DECAL DANGER CRUSH TRCTR & 3PT DECAL CAUTION OPERATIONAL MACH DECAL DANGER TIPPING HAZARD DECAL DANGER CANNOT READ ENG DECAL WARNING 20 MPH TRANS LRG DECAL WARNING PINCH PT/CRUSH DECAL DANGER ELECTROCUTION HA DECAL WARNING HIGH PRESSUR SML STOP PLATE WELDMENT HHCS 1/2-13X2 1/2 GR5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT Used on 36" row spacing only. Used on 36" row spacing only. Used on 36" row spacing only. Used on 36" row spacing only. 06/28/ P

10 Wings HB40 (Applies to HB40 only) Table of Contents P /28/17

11 Wings HB40 Table of Contents Frame (Applies to HB40 only) Ref. Part No. Part Description Comments Revision dwg H H H H H H C D D D C C C C C C C C C C C D C C C C C C C C C Image No. BEDDER STACKING WING FRAME WLD UPPER ARM LIFT LINK WLDMT FLEX LINK WELDMENT STACK FOLD EXTENSION LINK WLD LUG WELDMENT LINK UPPER LIFT ARM WLDMT NUT HEX 1 1/2-6 PLT PIN 1 1/2 X PIN 1 1/4 X 11 1/4 W/HOLE PIN 2 1/4 X 19 5/8 W/HOLE PIN ROLL 3/8 X 2 1/2 PLT PIN LINCH 5/16 X 2 11/32 HHCS 1/2-13X3 3/4 GR5 NUT LOCK 1/2-13 PLT HHCS 3/8-16X2 1/2 GR5 NUT LOCK 3/8-16 NYLON INSERT PIN CLVS 1.25X3.38 USBL GR5 PIN COTTER 1/4 X 2 PLT WASHER FLAT 1 1/4 SAE PLT BUSHING SPINDLE 1 1/2X1 1/4X1 HHCS 3/8-16X1 1/4 GR5 ADJUSTMENT RETAINING CLIP WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT BUSHING 1 1/2 X 1 1/4 X 1 1/2 GREASE ZERK STRAIGHT 1/4-28 DECAL WARNING PINCH/SHEAR HAZ DECAL HB40 DECAL REFLECTOR AMBER 1 1/2X9 DECAL REFLECTOR RED 1 1/2X9 DECAL GP&LOGO HARVEST/3X20 STR 06/28/ P

12 Gauge Wheel Table of Contents (Applies to HB25, HB40 only) P /28/17

13 Gauge Wheel Table of Contents Frame (Applies to HB25, HB40 only) Ref. Part No. Part Description Comments Revision dwg C C C C C D C C C C C C C C C C C H C C H C C C C C C C C C D C C Image No. TIRE 9.5 L X 15 8 PLY WHEEL 15X6 6 BOLT BUCKSKIN VALVE STEM TR415X.625X1 1/4 LG TIRE/WHEEL 9.5LX15 8 PLY BKSN HUB 6-BOLT SPINDLE 2X13.5 Q890 AXLE SPINDLE 2 X 13 1/2 (Q783) SEAL GREASE 1.875X3.000X0.313 BRG CONE 1.62IDX.78WD#LM BRG CUP 2.89ODX.58WD #LM HUB 890 W/CUPS 6-BOLT 6" BC BRG CUP LM NUT LUG 9/16-18 X 90 PLT BRG CONE 1.25ID LM WASHER SPINDLE - 7/8 NUT HEX SLOTTED 7/8-14 PLT PIN COTTER 5/32 X 1 1/2 LONG GREASE CAP 2.448X.25X1.13 HIP BED GAUGE WHEEL LEG WELD PIN CLVS.31X2.81 USBL PIN COTTER 1/8 X 1 HIP BED EXTENDED GW MOUNT WELD HHCS 1-8X9 GR8 SPTHD NUT HEX TOP LOCK 1-8 PLT U-BOLT 3/4-10 X 7 X 8 1/2 U-BOLT 3/4-10 X 7 1/32 X 7 NUT HEX FLANGE LOCK 3/4-10 PLT SCREW JACK 2000# TP-WIND SPCL HHCS 3/4-10X4 1/2 GR5 WASHER FLAT 3/4 SAE PLT NUT LOCK 3/4-10 PLT JACK SUPPORT PLATE HHCS 3/4-10X2 GR5 HHCS 1/2-13X1 1/4 GR5 Includes items 1-3 Includes items 6-17 Used in both LH and RH applications Used on wings Used on center frame 06/28/ P

14 Table of Contents Lights HB25 (S/N D1001G -) (Applies to HB25 only) P /28/17

15 Table of Contents Frame Lights HB25 (S/N D1001G -) (Applies to HB25 only) Ref. Part No. Part Description Comments Revision dwg H H C C C H D C C C C C C C C C C C D C C C C C C Image No. 9 ROW LISTER/CULT FRAME 9 ROW LISTER/CULT FRAME 30 LIGHT HARNESS 15' WISHBONE LED LIGHT HARNESS 18' WISHBONE LED LIGHT HRNSS ENHANCE MODULE LED LIGHT BRACKET MOUNT WELDMENT LIGHT BRACKET MOUNT TUBE RH HHCS 1/4-20X1 1/2 GR5 NUT HEX LOCK 1/4-20 FLG LIGHT, AMBER LAMP LED NUT HEX NYLOCK 1/4-20 U-BOLT 1/4-20 X 2 9/32 X 3 GR2 HHCS 1/2-13X3 1/4 GR5 U-BOLT 5/8-11 X 7 1/32 X 8 1/2 NUT HEX 5/8-11 PLT WASHER LOCK SPRING 5/8 PLT NUT HEX FLG LOCK 1/2-13 PLT LIGHT HARNESS, 7' LEAD - LED LIGHT BRACKET MOUNT TUBE LH LIGHT, RED LAMP - LED DECAL REFLECTOR AMBER 2X9 DECAL REFLECTOR RED 2X9 DECAL REFLECTR DAYTIME 2X9 DECAL HB25 DECAL WARNING 20 MPH TRANS LRG Used on HB25 Wide Used on HB25 Narrrow Used on HB25 Narrrow Used on HB25 Wide 06/28/ P

16 Table of Contents Lights HB25 (S/N D1002G +) (Applies to HB25 only) P /28/17

17 Table of Contents Frame Lights HB25 (S/N D1002G +) (Applies to HB25 only) Ref. Part No. Part Description Comments Revision dwg D D H C C C C C C C C C C C C C C D D C C C C C C C C C C C C C C C Image No. LIGHT BRACKET MOUNT TUBE RH LIGHT BRACKET MOUNT TUBE LH LIGHT BRACKET MOUNT WELDMENT U-BOLT 5/8-11 X 7 1/32 X 8 1/2 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT HHCS 1/2-13X3 1/4 GR5 NUT HEX FLG LOCK 1/2-13 PLT LIGHT HARNESS, 7' LEAD - LED LIGHT HARNESS WISHBONE LED HHCS 1/4-20X1 1/2 GR5 NUT HEX LOCK 1/4-20 FLG DECAL SLOW MOVING-GALV. BACKED HHCS 1/4-20X1/2 GR5 WASHER FLAT 1/4 SAE PLT WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT DECAL MOUNT DECAL MOUNT U-BOLT 5/16-18X2 1/32X2 11/16 WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT DECAL REFLECTOR RED 2X9 DECAL REFLECTOR DAYTIME 2X9 DECAL REFLECTOR AMBER 2X9 LIGHT, AMBER LAMP LED U-BOLT 1/4-20 X 2 9/32 X 3 GR2 NUT HEX NYLOCK 1/4-20 DECAL HB25 DECAL GP&LOGO HARVEST/3X20 STR LIGHT, RED LAMP - LED DECAL WARNING 20 MPH TRANS LRG ADHESIVE BACK CORD CLIP LIGHT HRNSS ENHANCE MODULE LED 06/28/ P

18 Table of Contents Lights HB40 (S/N D1005F -) (Applies to HB40 only) P /28/17

19 Table of Contents Frame Lights HB40 (S/N D1005F -) (Applies to HB40 only) Ref. Part No. Part Description Comments Revision dwg H C C H D C C C C C C C C C C C D C C C C C Image No. 40FT STACK TOOLBAR CTR FRAME LIGHT HARNESS 18' WISHBONE LED LIGHT HRNSS ENHANCE MODULE LED LIGHT BRACKET MOUNT WELDMENT LIGHT BRACKET MOUNT TUBE RH HHCS 1/4-20X1 1/2 GR5 NUT HEX LOCK 1/4-20 FLG LIGHT, AMBER LAMP LED NUT HEX NYLOCK 1/4-20 U-BOLT 1/4-20 X 2 9/32 X 3 GR2 HHCS 1/2-13X3 1/4 GR5 U-BOLT 5/8-11 X 7 1/32 X 8 1/2 NUT HEX 5/8-11 PLT WASHER LOCK SPRING 5/8 PLT NUT HEX FLG LOCK 1/2-13 PLT LIGHT HARNESS, 7' LEAD - LED LIGHT BRACKET MOUNT TUBE LH LIGHT, RED LAMP - LED DECAL REFLECTOR AMBER 1 1/2X9 DECAL REFLECTOR RED 1 1/2X9 DECAL REFLECTR DAYTIME 1 1/2X9 DECAL WARNING 20 MPH TRANS LRG 06/28/ P

20 Table of Contents Lights HB40 (S/N D1006F+) (Applies to HB40 only) P /28/17

21 Table of Contents Frame Lights HB40 (S/N D1006F+) (Applies to HB40 only) Ref. Part No. Part Description Comments Revision dwg D D H C C C C C C C C C C C C C C D D C C C C C C C C C C C C C C C C Image No. LIGHT BRACKET MOUNT TUBE RH LIGHT BRACKET MOUNT TUBE LH LIGHT BRACKET MOUNT WELDMENT U-BOLT 5/8-11 X 7 1/32 X 8 1/2 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT HHCS 1/2-13X3 1/4 GR5 NUT HEX FLG LOCK 1/2-13 PLT LIGHT HARNESS, 7' LEAD - LED LIGHT HARNESS WISHBONE LED HHCS 1/4-20X1 1/2 GR5 NUT HEX LOCK 1/4-20 FLG DECAL SLOW MOVING-GALV. BACKED HHCS 1/4-20X1/2 GR5 WASHER FLAT 1/4 SAE PLT WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT DECAL MOUNT DECAL MOUNT U-BOLT 5/16-18X2 1/32X2 11/16 WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT DECAL REFLECTOR RED 2X9 DECAL REFLECTOR DAYTIME 2X9 DECAL REFLECTOR AMBER 2X9 LIGHT, AMBER LAMP LED U-BOLT 1/4-20 X 2 9/32 X 3 GR2 NUT HEX NYLOCK 1/4-20 DECAL DANGER TIPPING HAZARD DECAL DANGER ELECTROCUTION HA LIGHT, RED LAMP - LED DECAL WARNING 20 MPH TRANS LRG DECAL WARNING PINCH PT/CRUSH ADHESIVE BACK CORD CLIP LIGHT HRNSS ENHANCE MODULE LED 06/28/ P

22 Row Units Table of Contents (Applies to HB25, HB40 only) P /28/17

23 Row Units Table of Contents HB Row Units (Applies to HB25, HB40 only) Ref. Part No. Part Description Comments Revision dwg L H K C C C C L H L H A A A D D C C Image No. HIP BED ROW UNIT DUAL LH GANG FRAME HIPPER DUAL DISC HIPPER GANG ASY HHCS 3/4-10X2 1/2 GR8 NUT LOCK 3/4-10 PLT NUT HEX FLG LCK 7/8-9 PLT U-BOLT 7/8-9 X 7 1/32 X 9 HIP BED ROW UNIT SHORT ASY GANG FRAME HIPPER SHORT HIP BED ROW UNIT LONG ASY GANG FRAME HIPPER LONG HIP BED WEAR GUARD KIT 12 ROW HIP BED WEAR GUARD KIT 16 ROW HIP BED WEAR GUARD KIT 8 ROW WEAR GUARD LH WEAR GUARD RH HHCS 3/4-10X3 1/4 GR8 NUT LOCK 3/4-10 PLT Includes 2-7 See "HB Gang Assembly" for breakdowns Includes 9 & 3-7 Includes 11 & 3-7 Includes items (48 guards) Includes items (74 guards) Includes items (32 guards) Shown. 06/28/ P

24 Table of Contents Row Unit Gang Assemblies (Applies to HB25, HB40 only) P /28/17

25 Table of Contents HB Row Units Row Unit Gang Assemblies (Applies to HB25, HB40 only) Ref. Part No. Part Description Comments Revision dwg K H D S D D D D C C C D D C C C C C C C C C C C Image No. DISC HIPPER GANG ASY GANG AXLE WELDMENT END BELL SMALL GANG BRG & HSNG ASY END BELL LARGE END GANG WASHER SPACER PLATE LOCK PLATE NUT HEX 1 1/2-12 GR5 PLAIN RHSNB 1/2-13X2 GR5 NUT LOCK 1/2-13 PLT GANG BRG HOUSING SHIELD WASHER BEARING 1 1/2 SQ BALL SNGL ROW SNAP RING INT OD.120W GREASE ZERK STRAIGHT 1/ X 1/4 NOTCHED BLADE 24 X 1/4 SMOOTH BLADE 22 X 1/4 NOTCHED BLADEBUB 22 X 1/4 SMOOTH BLADE 20 X 1/4 NOTCHED BLADE 20 X 1/4 SMOOTH BLADE 18 X 1/4 NOTCHED BLADE 18 X 1/4 SMOOTH BLADE Includes #s 2-11 Includes #s /28/ P

26 Table of Contents Scraper Assembly (Applies to HB25, HB40 only) P /28/17

27 Table of Contents HB Row Units Scraper Assembly (Applies to HB25, HB40 only) Ref. Part No. Part Description Comments Revision dwg L L D D C C C C C C Image No. HIP BED SCRAPER ASSEMBLY LH HIP BED SCRAPER ASSEMBLY RH HIP BED SCRAPER PLATE HIP BED SCRAPER LEG U-BOLT 1/2-13 X 3 1/32 X 4 NUT HEX FLG LOCK 1/2-13 PLT HHCS 1/2-13X1 1/2 GR5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLTS WASHER FLAT 1/2 SAE PLT Includes items 3-9 Includes items /28/ P

28 Table of Contents Hydraulic Cylinder (Applies to HB40 only) P /28/17

29 Table of Contents Hydraulics Hydraulic Cylinder (Applies to HB40 only) Ref. Part No. Part Description Comments Revision dwg M7022-ADI 2S8634NC 3R9612 4M8108 5M8138 6R9170-ADI 7M C D 2A C 2A0249 2A0279 2A C 2A C C C C C Image No. MW ROD CLEVIS 1.25PN THD MW ROD MW HEAD MW PISTON MW TUBE MIDWAY ADI BASE MW TIE ROD PIN CLVS 1.25X3.38 USBL GR5 CYL PIN 1.25 X 4.63 NO HEAD MW WIPER SEAL KIT MW 4.5 CYL 5A7116 O-RING MW BACK UP CROWN SEAL MIDWAY SEAL KIT MW 4.5 CYL 5A7116 MW PISTON NUT 1 1/4"-12 UNF NUT HEX 3/4-16 PLAIN NUT HEX 3/8-16 PLAIN HHCS 3/8-16X1 3/4 GR5 PIN COTTER 3/16 X 2 1/4 PLT SEAL KIT FOR C 06/28/ P

30 Wing Hydraulics (Applies to HB40 only) Table of Contents P /28/17

31 Table of Contents Hydraulics Wing Hydraulics (Applies to HB40 only) Ref. Part No. Part Description Comments Revision dwg C C D C C C C C C C H C C C Image No. CYL 5X30X2 ROD (TIE) EL 3/4MORB 9/16MJIC ORIFICE PLATE 1/8 8 MORB HH1/4R /16FJIC HH1/2R /4FJIC EL 9/16MJIC HH3/8R /4MORB 9/16FJIC HG HANDLE - GRAY RET HG HANDLE - GREEN RET CP 3/4FORB MALE QD POPPET TYPE CYL PIN NR 1.25X3.63USBX3.13CH PIN COTTER 1/4 X 2 PLT PIN CLVS 1.25X3.38 USBL GR5 WASHER FLAT 1 1/4 SAE PLT 06/28/ P

32 Table of Contents The is a numeric index of all part numbers included in this manual. The index shows what page(s) the part is used on. Part Number Page Part Number Page Part Number Page Part Number Page D H D M7022-ADI A A A A A S8634NC R H H D D M D H...9, H...7, H H H...7, H H H...7, H...7, H...7, 15, 17, 19, H D H H...7, H...7, H...7, H H S H H H H H K...23, L L L L L A A D...15, 17, 19, D...15, 17, 19, A H D D D D D D D D D D D D D D...17, D...17, 21 5M R9170-ADI M C...11, C C C C C C C...7, C C...15, 17, 19, C C C C...7, C...15, 17, 19, C C...7, 9, 17, C C...7, C C C...7, 9, 17, C...17, C C...11, C...9, C...7, 15, 17, 19, C...13, C...7, C C C C C...15, 17, 19, C C...15, 17, 19, 21, C...7, 9, C C...15, 17, 19, C C C C...7, 9, 17, C...7, 9, 17, C...17, C C...9, C C...7, 15, 17, 19, C...7, C C...11, C C C...11, C...7, C C C C...7, C C...7, C...11, 29, C C...7, C C C...7, C...7, 9, C...7, 15, 17, 19, C C C...15, 17, 19, C...7, C...17, C C C C C C C C C C C C C C C C...9, C...7, 9, 17, C...9, 15, 17, 19, C C...7, C C...7, C...7, C C C C C C C C C C C C C C...15, 17, 19, C...15, C C...15, 17, 19, C...15, 17, 19, C...15, 17, 19, C...17, C... 7, 11, 15, 17, 19, C... 7, 11, 15, 17, 19, C...15, 17, 19, C...9, C C C...7, 11, C C C...9, C C...7, 15, C C C C C...17, 21 dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg P /28/17

33 Table of Contents This Page Intentionally Left Blank 06/28/ P

34 Great Plains Mfg., Inc E. North Street Salina, Kansas USA