Parts Manual. Spartan II No-Till Drill NTA-607/NTA Copyright 2017 Printed 10/11/ P

Transcription

1 Table of Contents Parts Manual NTA-607/NTA-2007 Spartan II No-Till Drill Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! Cover illustration may show optional equipment not supplied with standard unit. Copyright 2017 Printed 10/11/ P

2 Table of Contents Table of Contents Section 1: Introduction...4 Using This Manual...4 Manual Replacement Information...4 Manual Revisions...4 Touch-up Paint...4 Hardware Legend...5 Replacement Hardware...5 Serial Numbers...5 Part Number Service Coding...5 Cart Frame...6 Tongue to Frame...6 Walkboard...8 Hub and Wheel Without Brakes...12 Hub and Wheel with Brakes Bushel Bin Assembly Bushel Bin Mounting...18 Dual 82 Bushel Bin Assembly...20 Dual 82 Bushel Bin Mounting...22 Brakes...24 Air Brakes...24 Hydraulic Brakes...26 Parking Brakes...28 Fan & Air System...30 Fan Mounting Dual 82 Bushel Bushel Bin Meter Mounting...34 Fan Mounting 150 Bushel...36 Meter Box Assembly...40 Meter Shaft Assembly...44 Cart Hydraulics...46 Cart Hydraulics with Dual Hoppers...46 Cart Hydraulics with One Hopper...48 Implement Frame...50 Implement Hitch...50 Implement Lift Assist to Frame...52 Rear Implement Lift Assist...54 Implement Weight Bracket Mounting...56 Implement Wing to Frame...58 Gauge Wheel Assembly...60 Gauge Wheel Scaper...62 Rear Transport Wheels...64 Implement Hydraulics...66 Center and Right Wing...66 Left Wing Hydraulics...70 Hydraulic Cylinder ( P)...72 Hydraulic Cylinder ( C)...74 Hydraulic Cylinder ( C)...76 Hydraulic Cylinder ( C)...78 Hydraulic Cylinder ( C)...80 Hydraulic Bypass Valve ( C)...82 Pressure Reducing Valve ( C)...84 Relief Valve ( C)...86 Openers...88 Opener Body...88 Coulter...90 Fertilizer Hose...92 Seed-Lok (Option)...94 Press Wheels " x 12" Double Press Wheel " x 13.5" Double Press Wheel " x 13" V-Crown Press Wheel Press Wheel Scraper Towers Tower Assembly Tower Mounting Lights and Decals Cart Decals Implement Decals Implement Lights Lights and Decals Cart Decals Implement Decals Cart Lights Implement Lights Monitor Monitor Marker Marker Assembly Marker Hydraulics Marker Disk And Hub ( S) Copyright 2017 All rights reserved Printed 10/11/17 Great Plains Manufacturing, Inc. provides this publication as is without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. Great Plains Manufacturing, Incorporated Trademarks The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains All other brands and product names are trademarks or registered trademarks of their respective holders. Printed in the United States of America P /11/17

3 Table of Contents Alphabetized Table of Contents Selected Models 1 1" x 12" Double Press Wheel " x 13.5" Double Press Wheel Bushel Bin Assembly Bushel Bin Meter Mounting Bushel Bin Mounting " x 13" V-Crown Press Wheel A Air Brakes...24 C Cart Decals Cart Hydraulics with Dual Hoppers...46 Cart Hydraulics with One Hopper...48 Cart Lights Center and Right Wing...66 Coulter...90 D Dual 82 Bushel Bin Assembly...20 Dual 82 Bushel Bin Mounting...22 F Fan Mounting 150 Bushel...36 Fan Mounting Dual 82 Bushel...30 Fertilizer Hose...92 G Gauge Wheel Assembly...60 Gauge Wheel Scaper...62 L Left Wing Hydraulics...70 M Marker Assembly Marker Disk And Hub ( S) Marker Hydraulics Meter Box Assembly...40 Meter Shaft Assembly...44 Monitor O Opener Body...88 P Parking Brakes...28 Press Wheel Scraper Pressure Reducing Valve ( C)...84 R Rear Implement Lift Assist...54 Rear Transport Wheels...64 Relief Valve ( C)...86 S Seed-Lok (Option)...94 T Tongue to Frame...6 Tower Assembly Tower Mounting W Walkboard...8 H Hub and Wheel with Brakes...14 Hub and Wheel Without Brakes...12 Hydraulic Brakes...26 Hydraulic Bypass Valve ( C)...82 Hydraulic Cylinder ( P)...72 Hydraulic Cylinder ( C)...74 Hydraulic Cylinder ( C)...76 Hydraulic Cylinder ( C)...78 Hydraulic Cylinder ( C)...80 I Implement Decals Implement Hitch...50 Implement Lift Assist to Frame...52 Implement Lights Implement Weight Bracket Mounting...56 Implement Wing to Frame /11/ P

4 Table of Contents P /11/17

5 Table of Contents 10/11/ P

6 Tongue to Frame Table of Contents P /11/17

7 Table of Contents Cart Frame Tongue to Frame Ref. Part No. Part Description Comments Revision dwg H H C C H H C C C L C C D C C C C C C C C C C C C D C C C C C C C C D C C C C H C C C H C C D C C D C C C C C C C Image No. 607 HITCH WELDMENT CART FRAME WELDMENT CAT 3 RING-SCHARMULLER SCREW JACK 5000# SD-WND JACK FOOT WELDMENT HITCH WELDMENT HHCS 1 1/4-7X9 GR5 SPTHD WASHER LOCK 1 1/4 SPRING PLT NUT HEX 1 1/4-7 PLT HITCH ASM HHCS M20X2.5X70 GR8.8 WASHER LOCK M20 PLT HOSE RETAINER HHCS 3/8-16X1 1/4 GR5 WASHER FLAT 3/8 USS PLT NUT LOCK 3/8-16 NYLON INSERT SPRING HOSE LOOP HEAVY HHCS 1/2-13X1 1/2 GR5 WASHER FLAT 1/2 USS PLT WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT MANUAL PAK 1" W/ GASKET HHCS 1/4-20X1 GR5 MINI END WHEEL PRESS WHEEL NUT HEX LOCK 1/4-20 FLG MANUAL PAK MOUNT U-BOLT 5/16-18 X 4 1/32 X 5 WASHER FLAT 5/16 USS PLT WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT HHCS 3/4-10X2 1/2 GR5 WASHER FLAT 3/4 HARD USS WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT TANK MOUNT U-BOLT 3/8-16 X 4 1/32 X 5 WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT HHCS 1/2-13X3 1/4 GR5 NTA2007 PULL BAR PIN CLVS 1.0X2.45 USBL WASHER FLAT 1 USS PLT PIN COTTER 3/16 X 2 16 ROW PULLBAR ADJUSTER NUT HEX 1 1/2-6 PLT PIN CLVS 1.0X4.06 USBL SLEEVE, SPRING LINK MOUNT HHCS 1/4-20X2 GR5 NUT LOCK 1/4-20 PLT RADAR MOUNT U-BOLT 1/2-13 X 2 1/2 X 3 1/2 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT HHCS 1/4-20X1 3/4 GR5 NUT HEX LOCK 1/4-20 FLG SAFETY CHAIN LB HHCS 1 1/4-7X10 GR5 SPTHD INCLUDES 3 AND 6 10/11/ P

8 Walkboard Table of Contents P /11/17

9 Walkboard Table of Contents Cart Frame Ref. Part No. Part Description Comments Revision dwg H D H D D D D D D D C H C D C D C C C C C C C C C C D C C D C C H D D D D D D C C C C C C D D D D D D C C C C Image No. CART FRAME WELDMENT HAND RAIL R.H. END HANDRAIL WLMT HAND RAIL CROSS TUBE FRONT CENTER HANDRAIL FRONT HANDRAIL MNT PLT DECAL BOARD CENTER HANDRAIL RETAINER REAR HANDRAIL CAP-PLUG LADDER GRAB RAIL TUBE CAP 1 1/4 ID TB X 3 LG 607 LADDER WLMT EDGE TRIM FOR NTA607 HANDLE NARROW WALKBOARD EXT X x 90 LB GAS SPRING WALKBOARD X 107 1/2 RHSNB 3/8-16X1 1/4 GR5 WASHER FLAT 3/8 USS PLT WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT HHCS 3/8-16X3 GR5 NUT LOCK 3/8-16 NYLON INSERT HHCS 3/8-16X2 GR5 NUT LOCK 3/8-16 NYLON INSERT HHCS 3/8-16X1 3/4 GR5 HHCS 3/8-16X1 1/4 GR5 CART WALKBOARD AND HANDRAL MNT BALL STUD 10MM X 5/16-18 UNC NUT HEX FLANGE 5/16-18 PLT PLUNGER LOCK PIN SPRING COMP 1/2 OD X.052 W RING, SPLIT 1-1/4 I.D. HANDRAIL MOUNT WELDMENT LADDER MOUNT RIGHT HAND WALKBOARD MOUNT INSIDE SIGN BRACKET WHEEL CHOCK MOUNTING PLATE WHEEL CHOCK OFFSET MOUNT WHEEL CHOCK TOP PLATE WHEEL CHOCK HHCS 1/2-13X2 1/4 GR5 NUT HEX NYLOCK 1/2-13 WASHER FLAT 1/2 HARD ASTMF436 HHCS 3/8-16X2 1/4 GR5 HHCS 3/8-16X1 GR5 NARROW WALKBOARD EXT CTR MNT NARROW WALKBOARD EXT END MNT EXT WALKBOARD GAS SPRING MNT CALIBRATION BAG BOX DOOR CALIB BAG BOX TOP CALIBRATION BAG BOX BOTTOM HHCS #10-24X1/2 GR5 HHCS 1/4-20X1/2 GR2 NUT HEX PLT NUT HEX 1/4-20 PLT Used on single hopper carts along with #16. Used on both single and double hopper carts. Used on single hopper carts. Used on single hopper carts. Used on single hopper carts. 10/11/ P

10 Table of Contents Walkboard (continued) Ref Part No C C C C C C Part Description WASHER LOCK SPRING 1/4 PLT WASHER LOCK #10 PIN WIRE RETAIN 5/16 X 2 1/2 LANYARD 3/64 X 6 EYE-LOOP DIGITAL SCALE 50 LB/23 KG CULT DRILL CALIBRATION BAG Comments Revision P /11/17

11 Table of Contents Cart Frame Walkboard (continued) This Page Intentionally Left Blank 10/11/ P

12 Table of Contents Hub and Wheel Without Brakes (Applies to NTA-2007 only) P /11/17

13 Table of Contents Cart Frame Hub and Wheel Without Brakes (Applies to NTA-2007 only) Ref. Part No. Part Description Comments Revision dwg Image No H TELESCOPING CART AXLE K 23.5/55-26 TIRE/20-10BLT WL K 23.5/55-26 TIRE/20-10BLT WL K ADC BOLT HUB AND SPINDL C ADC 2350 SPINDLE 10 BLT 12000# GKN-P SPINDLE WASHER GKN ARMSTRONG C NUT HEX SLOTTED 1 1/4-12 PLAIN C PIN COTTER 7/32 X C HUB ASSY 10 BOLT 12000# C HHCS 5/16-18X3/4 GR5 GKN-P HUB CAP GKN ARMSTRONG GKN-P RUBBER GASKET GKN ARMSTRONG C BRG CONE 1.75IDX1.15WD # C BRG CUP 4.25ODX.87WD #453A C NUT HEX FLANGE 3/4-16 PLT C HUB STUD 3/4-16X2 9/16 GR5 GKN-L HUB 10-BOLT MACHINED CASTING C BRG CUP 4.43ODX.93WD # C BRG CONE 2.50ID #39585 GKN-P GREASE SEAL GKN ARMSTRONG C HHCS 1-8X5 1/2 GR C NUT HEX LOCK 1-8 PLT C VALVE STEM METAL TR-575 TUBLES Used on left side Used on right side Includes 5 and 9 Includes 6-8 Includes /11/ P

14 Table of Contents Hub and Wheel with Brakes P /11/17

15 Table of Contents Cart Frame Hub and Wheel with Brakes Ref. Part No. Part Description Comments Revision dwg C C C C C C D D C H C A Image No X 20 X 335MM BC RIM 600/ TIRE 600/ WHEEL ASM LH NTA607 BRAKE AXLE ASM HHCS 1-8X9 GR8 PLT NUT HEX 1-8 NYLON INSERT PLT AXLE CLAMP TUBE SPACER AXLE RETAINER PIN SNAP RING EXT 1 HEAVY AXLE HOUSING WDMT 600/ WHEEL ASM RH BRAKE AXLE ASM Includes 1 and 2 Includes 1 and 2 Includes 4, 8, 9 & 10 10/11/ P

16 Table of Contents 150 Bushel Bin Assembly P /11/17

17 Table of Contents Cart Frame 150 Bushel Bin Assembly Ref. Part No. Part Description Comments Revision dwg C C C D H C C C C C C D H C C H H H D C H C C C C C C C H C D C C C R K C C C H C C C C C Image No. HHCS 3/4-10X8 GR5 PLT WASHER FLAT 3/4 SAE PLT FLNG BUSHING 1 1/8 X 1 X 3/4 LID SWIVEL INNER PIVOT TUBE LID SWIVEL WELDMENT NUT HEX NYLOCK 1/2-13 HHCS 1/2-13X2 1/2 GR5 SPRING COMP DIE.75X.375X1.50L NUT HEX 3/8-16 PLT WASHER FLAT 3/8 SAE PLT SCR HX SKT BUT CP 3/8-16X2 1/2 BIN LID TOP CROSS BAR AIR DRILL BIN LID HANDLE WLMNT PIN ROLL 1/2 X 1 3/4 HHCS 1/2-13X3 GR5 AIR DRILL BIN LID HOOK ROUND BIN LID WELDMENT STRAINER BASKET WELDMENT ADC2350 BIN LID SEAL RHSNB 3/8-16X1 1/2 GR5 LID FLANGE WELDMENT U-BOLT 3/8-16 X 2 5/8 X 3 1/4 WASHER FLAT 3/8 NEOPRENE PLT NUT FLANGE LOCK 3/8-16 PLT 150 BU SEED HOPPER NO LID HHCS 3/8-16X1 1/4 GR5 WASHER FLAT 3/8 USS PLT HHCS 1/4-20X1 1/4 GR5 150BU BIN LADDER U-BOLT 5/16-18X1 1/2X2 1/2 RND 150BU LADDER MOUNT WASHER FLAT 5/16 USS PLT NUT HEX NYLOCK 5/16-18 PLT CLAMP WRM DRV#28 SS( ) HOSE 1 ID 200PSI EPDM 4-OUTLET METER ASSEMBLY NUT HEX 1/4-20 PLT WASHER LOCK SPRING 1/4 PLT WASHER FLAT 1/4 USS PLT METER MOUNT WELDMENT AD 1/8MNPT 3/16 HOSE BARB NUT LOCK 3/8-16 NYLON INSERT HHCS 1/4-20X1 GR5 WASHER FLAT 1/4 HARD ASTMF436 SILICON 35YR CLEAR 10 OZ Refer to Meter Box Assembly for Breakdown 10/11/ P

18 Table of Contents 150 Bushel Bin Mounting P /11/17

19 Table of Contents Cart Frame 150 Bushel Bin Mounting Ref. Part No. Part Description Comments Revision dwg D C C D C H C C C C H Image No. 150 BU BIN STRAP 150 BU SEED HOPPER NO LID NUT HEX NYLOCK 1/2-13 TANK STRAP ATTACHMENT PLATE RHSNB 1/2-13X2 1/4 GR5 150 BU HOPPER MNT WLMT HHCS 1/2-13X1 1/2 GR5 WASHER FLAT 1/2 USS PLT WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT CART FRAME WELDMENT 10/11/ P

20 Table of Contents Dual 82 Bushel Bin Assembly P /11/17

21 Table of Contents Cart Frame Dual 82 Bushel Bin Assembly Ref. Part No. Part Description Comments Revision dwg C C C D H C C C C C C D H C C H H H D C H C C C C C C C H K K C C C C H C C C C C D C Image No. HHCS 3/4-10X8 GR5 PLT WASHER FLAT 3/4 SAE PLT FLNG BUSHING 1 1/8 X 1 X 3/4 LID SWIVEL INNER PIVOT TUBE LID SWIVEL WELDMENT NUT HEX NYLOCK 1/2-13 HHCS 1/2-13X2 1/2 GR5 SPRING COMP DIE.75X.375X1.50L NUT HEX 3/8-16 PLT WASHER FLAT 3/8 SAE PLT SCR HX SKT BUT CP 3/8-16X2 1/2 BIN LID TOP CROSS BAR AIR DRILL BIN LID HANDLE WLMNT PIN ROLL 1/2 X 1 3/4 HHCS 1/2-13X3 GR5 AIR DRILL BIN LID HOOK ROUND BIN LID WELDMENT STRAINER BASKET WELDMENT ADC2350 BIN LID SEAL RHSNB 3/8-16X1 1/2 GR5 LID FLANGE WELDMENT U-BOLT 3/8-16 X 2 5/8 X 3 1/4 WASHER FLAT 3/8 NEOPRENE PLT NUT FLANGE LOCK 3/8-16 PLT NUT HEX 1/4-20 PLT WASHER LOCK SPRING 1/4 PLT WASHER FLAT 1/4 USS PLT HHCS 1/4-20X1 1/4 GR5 METER MOUNT WELDMENT METER ASM LH METER ASM RH NUT HEX NYLOCK 5/16-18 PLT WASHER FLAT 5/16 USS PLT U-BOLT 5/16-18X1 1/2X2 1/2 RND NUT HEX 3/4-10 PLT NYLOCK BIN LADDER BULK PLANTER SEED HOPPER AD 1/8MNPT 3/16 HOSE BARB NUT LOCK 3/8-16 NYLON INSERT HHCS 1/4-20X1 GR5 WASHER FLAT 1/4 HARD ASTMF436 INSIDE BIN LADDER MNT SILICON 35YR CLEAR 10 OZ Refer to Meter Box for breakdown Refer to Meter Box for breakdown 10/11/ P

22 Table of Contents Dual 82 Bushel Bin Mounting P /11/17

23 Table of Contents Cart Frame Dual 82 Bushel Bin Mounting Ref. Part No. Part Description Comments Revision dwg D C H H C C C C C D C Image No. TANK STRAP BULK PLANTER SEED HOPPER CART FRAME WELDMENT 82/82 HOPPER MOUNT HHCS 1/2-13X1 3/4 GR5 WASHER FLAT 1/2 USS PLT WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT WASHER FLAT 1/2 SAE PLT TANK STRAP ATTACHMENT PLATE HHCS 1/2-13X4 FTHD 10/11/ P

24 Air Brakes Table of Contents P /11/17

25 Air Brakes Table of Contents Brakes Ref. Part No. Part Description Comments Revision dwg C D D C C D C C C C C C C D C C C C C C C Image No. BRAKE CHAMBER BRAKE PIVOT MOUNT RH PARK BRAKE TOP PLATE RELAY-EMERGENCY VALVE NTA607 BRAKE AXLE ASM TANK MOUNT U-BOLT 3/8-16 X 4 1/32 X 5 WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT HHCS 1/2-13X1 1/2 GR5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT HHCS 3/8-16X1 1/4 GR5 AIR HOSE MOUNT LINE FILTER AIR COIL, YELLOW W/ HANDGRIP AIR COIL, RED W/ HANDGRIP PALM COUPLING, YELLOW PALM COUPLING, RED HHCS 3/8-16X1 1/2 GR5 AIR TANK - 20L 10/11/ P

26 Hydraulic Brakes Table of Contents P /11/17

27 Table of Contents Brakes Hydraulic Brakes Ref. Part No. Part Description Comments Revision dwg C D C C C C D C C C C D C D C C C C C C C C C C C A Image No. EMERGENCY VALVE C/W RESET EBRAKE VALVE MOUNT PLATE HHCS 3/8-16X1 1/2 GR5 WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT ACCUMULATOR 0.7L 120BAR ACCUMULATOR MOUNT BRACKET HHCS 1/4-20X1 GR5 WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT BRAKE CHAMBER BRAKE PIVOT MOUNT RH NTA607 BRAKE AXLE ASM PARK BRAKE TOP PLATE QUICK RELEASE - 1/2FBSP AD 1/2MBSPP 3/8MBSPP HH3/8R /8FBSP AD 3/8MBSPP 3/8MBSPP HH3/8R /8FBSP HH3/8R /8FBSP TEE 3/8MBSPP 3/8MBSPP 3/8MBSPP HH3/8R /8FBSP HSHCS M6X1X45 GR8.8 WASHER LOCK M6 PLT NUT HEX M6-1 BRAKE AXLE ASM Refer to "Hub and Wheel with Brakes" for breakdown 10/11/ P

28 Parking Brakes Table of Contents P /11/17

29 Parking Brakes Table of Contents Brakes Ref. Part No. Part Description Comments Revision dwg C S C C D H H D C C C C C D D D C H D C C C C C D C Image No. NTA607 BRAKE AXLE ASM PARK BRAKE ADJUSTMENT ASM CLEVIS 3/4-10 W/ 5/8PIN GALV NUT HEX 3/4-10 PLT EBRAKE PUSHROD PIVOT WELDMENT BRAKE PIVOT PIN WDMT BRAKE PIVOT MOUNT RH SHACKLE 3/XX5/8X7/16X1 1/4 GAL KNOTT - HAND BRAKE ADJUSTER HHCS 3/8-16X1 1/4 GR5 WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT 2 HOLE SPACER BRAKE JACK MOUNT 3/4-10 X 5 ALLTHREAD PULLEY 3.5OD X 5/16WIRE ROPE BRAKE PULLEY WDMT LH PULLEY MOUNT LOWER PLATE HHCS 1/2-13X1 1/2 GR5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT PIN CLVS.75 X 1.75 USBL PIN COTTER 1/8 X 1 PULLEY MOUNT PLATE RH WIRE ROPE 5/16X134.0W/THIMBLES 10/11/ P

30 Table of Contents Fan Mounting Dual 82 Bushel P /11/17

31 Table of Contents Fan & Air System Fan Mounting Dual 82 Bushel Ref. Part No. Part Description Comments Revision dwg H H C C C C C C C C C H K K S H C H C D H C C C C C C C C D C R C D C C C C H Image No. CART FRAME WELDMENT YP FAN MOUNT WLDMNT 2 HHCS 3/8-16X1 1/4 GR5 WASHER FLAT 3/8 USS PLT WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT 6 HYD FAN W/CASE DRAIN MOTOR PARKER F-11 FAN MTR ( ) HUB/MOTOR PLATE SEAL (2B) CRARY FAN MOTOR B MOUNT PLATE CASTING 6 FAN HOUSING LH SIDE 13 FAN IMPELLER CASTING 6 FAN HOUSING RH SIDE BUSHING 20MM WELDMENT SCREEN 6" FAN SCREEN CAP SCREW #14X1/2 HWH T-AB ZP BOLT, 1/4-20X3/4 HWH GR5 CZP FLAT WASHER 1/4 HFSS 1/4-20X1 GR5 NUT HEX FLANGE 1/4-20 PLT BOLT, 1/2X1 3/4 HEX HD WASHER 1/2 SAE FLAT NUT 1/2 NYLOCK PLASTIC PLUG 7/16 PLASTIC PLUG 1/4 CLAMP WRM DRV #96SS ( ) DUAL METER AIR SPLITTER WELD METER ASM LH METER ASM RH 4 OUTLET, 4" ASM COVER PLATE WDMT UHMW SPACER, LOWER 4 OUTLET SLIDE PLATE WELDMENT 4 OUTLET SLIDE BACKING PLATE 4 OUTLET PLATE 4" TRANSITION CONE LINEAR ACTUATOR-200MM STR W/FB PIN CLVS.38X1.52 USBL PIN COTTER 1/8 X 1 HHCS 3/8-16X2 GR5 NUT FLANGE LOCK 3/8-16 PLT HHCS 1/2-13X1 1/2 GR5 NUT HEX 1/2-13 PLT 3 AIR HOSE BAND CLAMP GAUGE MOUNT BRACKET MAGNEHELIC PRES GAGE-0-50inH2O HOSE 1/4 RUBBER AIR CLAMP WRM DRV #5 SS ( ) WALKBOARD X 107 1/2 WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1/2 SAE PLT HOSE 6.0 ID DUCTING X 0.7 FT FAN INLET RAIN SHIELD FAN MOUNT ADJUSTMENT WLMT Includes 8-25 Refer to Meter Box Assembly for breakdown Refer to Meter Box Assembly for breakdown Includes 32-44, 51 & 52 10/11/ P

32 Table of Contents Fan Mounting Dual 82 Bushel (continued) Ref. 56. Part No R Part Description PVC SEED HOSE 4 ID Comments Revision P /11/17

33 Table of Contents Fan & Air System Fan Mounting Dual 82 Bushel (continued) This Page Intentionally Left Blank 10/11/ P

34 Table of Contents 150 Bushel Bin Meter Mounting P /11/17

35 Table of Contents Fan & Air System 150 Bushel Bin Meter Mounting Ref. Part No. Part Description Comments Revision dwg C H C C C C C C C C C D D D C Image No. 150 BU SEED HOPPER NO LID METER MOUNT WELDMENT HHCS 1/4-20X1 1/4 GR5 WASHER FLAT 1/4 USS PLT WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT HHCS 5/16-18X1 GR5 NUT HEX FLG TP LK 5/16-18ZNYCR RHSNB 3/8-16X1 1/4 GR5 WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT DUMP CHUTE CHUTE MOUNT F CHUTE MOUNT R WASHER FLAT 3/8 USS PLT 10/11/ P

36 Table of Contents Fan Mounting 150 Bushel P /11/17

37 Table of Contents Fan & Air System Fan Mounting 150 Bushel Ref. Part No. Part Description Comments Revision dwg H H C C C C C C C C C H K H S H C H C D H C C C C C C C C D C R C C C C C D C C Image No. CART FRAME WELDMENT YP FAN MOUNT WLDMNT HHCS 3/8-16X1 1/4 GR5 WASHER FLAT 3/8 USS PLT WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT 6 HYD FAN W/CASE DRAIN MOTOR PARKER F-11 FAN MTR ( ) HUB/MOTOR PLATE SEAL (2B) CRARY FAN MOTOR B MOUNT PLATE CASTING 6 FAN HOUSING LH SIDE 13 FAN IMPELLER CASTING 6 FAN HOUSING RH SIDE BUSHING 20MM WELDMENT SCREEN 6" FAN SCREEN CAP HFSS 1/4-20X1 GR5 NUT HEX FLANGE 1/4-20 PLT BOLT, 1/2X1 3/4 HEX HD NUT 1/2 NYLOCK SCREW #14X1/2 HWH T-AB ZP WASHER 1/2 SAE FLAT BOLT, 1/4-20X3/4 HWH GR5 CZP FLAT WASHER 1/4 PLASTIC PLUG 7/16 PLASTIC PLUG 1/4 CLAMP WRM DRV #96SS ( ) SINGLE BIN AIR SPLITTER METER ASM LH FAN MOUNT ADJUSTMENT WLMT DIVERTER ASM 2 OUTLET COVER WELDMENT 2 OUTLET UHMW SLIDE SPACER SLIDE PLATE WELDMENT TRANSITION MOUNT PLATE TRANSITION PLATE 4" TRANSITION CONE LINEAR ACTUATOR-200MM STR W/FB PIN CLVS.38X1.52 USBL PIN COTTER 1/8 X 1 HHCS 3/8-16X2 GR5 NUT FLANGE LOCK 3/8-16 PLT HHCS 1/2-13X1 1/2 GR5 NUT HEX 1/2-13 PLT 3 AIR HOSE BAND CLAMP GAUGE MOUNT BRACKET MAGNEHELIC PRES GAGE-0-50inH2O HOSE 1/4 RUBBER AIR CLAMP WRM DRV #5 SS ( ) FAN INLET RAIN SHIELD WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1/2 SAE PLT HOSE 6.0 ID DUCTING X 0.7 FT AIR MANIFOLD SUPPORT BRKT RHSNB 3/8-16X3/4 GR5 NUT FLANGE LOCK 3/8-16 PLT Includes Refer to Meter Box Assembly for breakdown Includes 32-44, 51 & 52 10/11/ P

38 Table of Contents Fan Mounting 150 Bushel (continued) Ref. 57. Part No D Part Description BRKT FAN SENSOR MOUNT MUELLER Comments Revision P /11/17

39 Table of Contents Fan & Air System Fan Mounting 150 Bushel (continued) This Page Intentionally Left Blank 10/11/ P

40 Table of Contents Meter Box Assembly P /11/17

41 Table of Contents Fan & Air System Meter Box Assembly Ref. Part No. Part Description Comments Revision dwg D D D C D C C C C D C D C C H C H C C H C C C D D C C D C C C S C C H C D C C C D V C H H C C C C C C C C D H H D Image No. DUMP CHUTE CHUTE MOUNT F CHUTE MOUNT R RHSNB 3/8-16X1 1/4 GR5 WALKBOARD LADDER PIVOT BUSHING WASHER FLAT 3/8 USS PLT WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT PIN CLVS.38X2.13 USBL TUBE SPACER PIN COTTER 1/8 X 1 DUMP SHOOT LATCH HHCS 3/8-16X1/2 GR5 NUT LOCK 3/8-16 PLT HANDLE WLMT PIN ROLL 1/4 X 1 PLATED METER COVER PIVOT WDMT R HHCS 1/4-20X2 1/4 GR5 WASHER FLAT 1/4 SAE PLT 4-OUTLET METER CAL LID WLDMENT 4-OUTLET METER CAL LID SEAL 3"-4 INLET METER TRANSITION 3" 4 OUTLET METER TRANSITION METER BOX PARTITION COVER LATCH PIN LYNCH 3/16 W/COTTER/CHAIN HHCS 3/8-16X1 1/4 GR5 GEAR COVER PIN LINCH 5/16 X 2 11/32 GEAR 17 TOOTH QUICK CHANGE RETAINING WIRE QC SHAFT ASM METER BRUSH #7 HOLDER 9C7190 METER BRUSH 8B9054 METER HOUSING WELDMENT DECAL METER GEAR RANGE REVERSE GEAR 54 TOOTH QUICK CHANGE HSG RIBB FLG 6BOLT PLT HHCS 1/4-20X3/4 SS WASHER LOCK 1/4 SS METERING BOX SEAL FLANGE BRG.755 HEX BORE W/S-S METERING BOX BEARING SEAL AGITATOR SHAFT WDMT METER MOUNT WELDMENT HHCS 1/4-20X1 1/4 GR5 WASHER FLAT 1/4 USS PLT WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT MINI END WHEEL PRESS WHEEL NUT HEX FLG TL 1/4-20 ZNYCR HHCS 5/16-18X1 GR5 NUT HEX FLG TP LK 5/16-18ZNYCR SHAFT DOOR ADJUSTMENT PIVOT ARM LEVER WDMT LOCKING HANDLE TUBE 10/11/ P

42 Table of Contents Meter Box Assembly (continued) Ref Part No C C C D D C D C C C C D C Part Description PIN COTTER 3/16 X 1 1/4 PLT PIN CLVS.38X1.52 USBL PIN COTTER 1/8 X 3/4 CLEANOUT DOOR MOUNT PLATE CLEANOUT DOOR CHANNEL HHCS 1/2-13X1 1/4 GR5 5/8 SPACER TUBE WASHER FLAT 1/2 SAE PLT NUT HEX TOP LOCK 1/2-13 PLT HHCS 1/2-13X2 3/4 FTHD NUT HEX 1/2-13 PLT LEVER STOP HHCS 3/8-16X3/4 GR5 Comments Revision P /11/17

43 Table of Contents Fan & Air System Meter Box Assembly (continued) This Page Intentionally Left Blank 10/11/ P

44 Table of Contents Meter Shaft Assembly P /11/17

45 Table of Contents Fan & Air System Meter Shaft Assembly Ref. Part No. Part Description Comments Revision dwg C D C C C C C V D C S C C C S C S Image No. SNAP RING EXT.812X METER SHAFT METERING BOX END SPACER 1.75 AGITATOR 8 POINT HALF METERING BOX SPACER-1 IN METERING BOX END SPACER METERING BOX BEARING SEAL BRG.755 HEX BORE W/S-S QC BEARING MOUNT SCREW SET 1/4-28X1/4 KNL CUP QC 4 OUTLET 3 STAR ASM METERING BOX END SPACER METERING BOX MIDDLE SPACER METERING BOX END SPACER QC 4 OUTLET 2 STAR ASM SMALL SEEDS METER STAR QC 4 OUTLET SM SD ASM Includes items 1-10 Includes items 1, 2, 4, 7-10, Includes items 1, 2, 7-10, 12-14, 16 10/11/ P

46 Table of Contents Cart Hydraulics with Dual Hoppers P /11/17

47 Table of Contents Cart Hydraulics Cart Hydraulics with Dual Hoppers Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C C C C C C C C C C C C D C C C C C C C C C C D C C C C C C C C C Image No. HH1/2R /4FJIC 3/4MORB HH1/2R /4FJIC HH1/2R /4FJIC 3/4MORB HH3/8R /16FJIC HH1/2R /4FJIC 3/4MORB HH3/8R /16FJIC 6 HYD FAN W/CASE DRAIN MOTOR HH3/8R /4FJIC 3/4MORB HH1/2R /4FJIC 3/4MORB HH1/4R /16FJIC HH1/2R /4FJIC 3/4MORB PARKER F-11 FAN MTR ( ) AD 1 1/16MORB 3/4FORB TE 3/4MJIC 3/4MORB 3/4MJIC EL 3/4FJIC 3/4MJIC EL 45 9/16MJIC 9/16MORB AD 3/4MORB 3/4FJIC TE 3/4MORB 3/4MJIC 3/4MJIC TE 3/4MJIC 3/4MJIC 3/4FJIC VALVE LINE CHECK CHAR-LYNN MOTOR MOTOR MOUNT BRACKET HHCS 3/8-16X3/4 GR5 WASHER LOCK SPRING 3/8 PLT AD 9/16MORB 9/16MJIC EL 9/16MJIC 9/16FJIC TE 9/16MJIC HOSE CLIP 5/8 I.D. HHCS 1/4-20X1 3/4 GR5 WASHER FLAT 1/4 SAE PLT WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT PWM VALVE MOUNT VLV FLOW CONTROL 12VDC PDM EL 9/16MJIC 9/16MORB TE 9/16MJIC 9/16MJIC 9/16MORB AD 9/16FJIC 9/16MJIC AD 9/16FJIC 9/16FJIC UNION HHCS 3/8-16X1 GR5 WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT HH1/4R /16FJIC 9/16MORB 10/11/ P

48 Table of Contents Cart Hydraulics with One Hopper P /11/17

49 Table of Contents Cart Hydraulics Cart Hydraulics with One Hopper Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C C C C C C C C C C C C D C C C C C C C C C C C Image No. HH1/2R /4FJIC 3/4MORB HH1/2R /4FJIC HH1/2R /4FJIC 3/4MORB HH3/8R /16FJIC HH3/8R /16FJIC AD 3/4MJIC 3/4MORB FLARE-O 6 HYD FAN W/CASE DRAIN MOTOR HH3/8R /4FJIC 3/4MORB HH1/2R /4FJIC 3/4MORB HH1/4R /16FJIC HH1/2R /4FJIC 3/4MORB PARKER F-11 FAN MTR ( ) AD 1 1/16MORB 3/4FORB TE 3/4MJIC 3/4MORB 3/4MJIC EL 3/4FJIC 3/4MJIC EL 45 9/16MJIC 9/16MORB AD 3/4MORB 3/4FJIC TE 3/4MORB 3/4MJIC 3/4MJIC TE 3/4MJIC 3/4MJIC 3/4FJIC VALVE LINE CHECK CHAR-LYNN MOTOR MOTOR MOUNT BRACKET HHCS 3/8-16X3/4 GR5 WASHER LOCK SPRING 3/8 PLT AD 9/16MORB 9/16MJIC HHCS 1/4-20X1 3/4 GR5 WASHER FLAT 1/4 SAE PLT WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT VLV FLOW CONTROL 12VDC PDM EL 9/16MJIC 9/16MORB HH1/4R /16FJIC 9/16MORB HH1/2R /4FJIC 3/4MORB 10/11/ P

50 Implement Hitch Table of Contents P /11/17

51 Implement Hitch Table of Contents Implement Frame Ref. Part No. Part Description Comments Revision dwg H H H C C C C D C C C D C C C C C D C D C D D C D C S H H C C C C C C C Image No. FRONT PULL LINK WELDMENT NTA607HD CENTER FRAME WELDMENT PIN WLDMNT 1.25 X NR PIN ROLL 3/8 X 2 1/2 PLT BUSH SL TEF 1.25IDX1.50ODX1.5 BUSHING CYL 1 1/4 X 1 X 1 PIN HTCH 1.0X3.25 USBL W/PIN HYD HOSE CLAMP BRACKET HOSE CLIP 5/8 I.D. HHCS 5/16-18X3/4 GR5 WASHER LOCK SPRING 5/16 PLT NTA607 PULL LINK CYLINDER LUG PIN CLVS 1.0X2.27 USBL GR5 PIN COTTER 3/16 X 1 1/2 PLT HYD CYL REP 3.5X10X1.25 TIEROD MW STOP BUSH SET 1 1/4 SBS125 HOSE CLIP 13/16 ID PIN 2 X 5.06 PIN ROLL 1/2 X 3 SPIRAL BUSHING SLEEVE 3.25X1.63X.50W HHCS 5/8-11X6 GR5 TRANSPORT LOCK SPRING TUBE TRANSPORT LOCK BLOCK SPRING COMP 15/16 OD X.098 W ADAPTOR NUT 3/4-16 X 5/8-11 CYL 1.5X2.5X.75 ROD (TIE ROD) NTA607HD TRANSPORT LOCK ASY BACK PRESSURE FLEX LINK WELDMT ANTIROTATION PIN 1.50 X 7.78 HHCS 5/8-11X2 3/4 GR5 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT WASHER FLAT 1 1/2 SAE PLT PIN ROLL 3/8 X 2 1/2 PLT CYL 3.5X16X2 ROD (TIE ROD) PIN CLVS 1.0X2.45 USBL Includes /11/ P

52 Table of Contents Implement Lift Assist to Frame P /11/17

53 Table of Contents Implement Frame Implement Lift Assist to Frame Ref. Part No. Part Description Comments Revision dwg H C C D H C C H Image No. NTA607HD CENTER FRAME WELDMENT DOWEL PIN 1/2 X 3 ALLOY STEEL PIN?45X160 TYPE P PIN 2 X 5.06 LIFT LINK TUBE WELDMENT NUT HEX JAM 2-12 UNF PLT BUSH SL TEF 2.00IDX2.25ODX1.63 LIFT LINK ADJUSTER WELDMENT 10/11/ P

54 Table of Contents Rear Implement Lift Assist P /11/17

55 Table of Contents Implement Frame Rear Implement Lift Assist Ref. Part No. Part Description Comments Revision dwg H H H H H C D C C C C C D D D H C C C C C C Image No. NTA607HD CENTER FRAME WELDMENT REAR PULL LINK WELDMENT REAR PIVOT UPPER LINK WELDMENT REAR AXLE WELDMENT WING PIVOT PIN WELDMENT PIN ROLL 3/8 X 2 1/2 PLT LIFT SWITCH MOUNT HHCS 5/16-18X3/4 GR5 WASHER LOCK SPRING 5/16 PLT WASHER FLAT 5/16 USS PLT WASHER FLAT 1 1/4 SAE PLT BUSH SL TEF 1.25IDX1.50ODX1.5 PIVOT PIN 1.25 X REAR DECAL PLATE SIGN BRACE CALIB BAG MOUNT WLMT RHSNB 5/16-18X1 GR5 WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT HHCS 3/8-16X1 GR5 WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT 10/11/ P

56 Table of Contents Implement Weight Bracket Mounting P /11/17

57 Table of Contents Implement Frame Implement Weight Bracket Mounting Ref. Part No. Part Description Comments Revision dwg S D H D C C C C C C Image No. WEIGHT ASSEMBLY NTA WEIGHT BRKT. BAR-LONG WEIGHT MOUNT WDMT NTA WEIGHT BRKT MOUNT HHCS 1-8X14 1/2 GR5 SPTHD WASHER FLAT 1 USS PLT NUT HEX LOCK 1-8 PLT HHCS 5/8-11X4 GR5 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLTM Includes /11/ P

58 Table of Contents Implement Wing to Frame P /11/17

59 Table of Contents Implement Frame Implement Wing to Frame Ref. Part No. Part Description Comments Revision dwg H H H H C C C C C D C C H C C C C C D C H C Image No. 10 DEG WING PIVOT EXT WLDMT CE LEFT WING WELDMENT NTA607HD CENTER FRAME WELDMENT WING PIVOT PIN WELDMENT PIN ROLL 3/8 X 2 1/2 PLT BUSH SL TEF 1.25IDX1.50ODX1.5 HHCS 1-8X7 GR5 NUT HEX TOP LOCK 1-8 PLT RHSNB 3/4-10X3 GR5 SPACER TUBE 1.25 X.81 X 1 LG WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT NTA607 FOLD CYL LUG 10 DNFLEX HHCS 5/8-11X1 3/4 GR5 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT CYL 4X30X2 TIE CL 3000# BUSHING CYL 1 1/4 X 1 X 1 NTA607 WING FRAME FOLD CYL LUG HHCS 3/4-10X4 GR8 OUTSIDE CHAIN MOUNT WLMT U-BOLT 5/8-11 X 5 1/32 X 6 GR5 Used with "no marker" option only. Used with "no marker" option only. Used with "no marker" option only. Used with "no marker" option only. 10/11/ P

60 Table of Contents Gauge Wheel Assembly P /11/17

61 Table of Contents Implement Frame Gauge Wheel Assembly Ref. Part No. Part Description Comments Revision dwg C C H C C H H C C C H C C C C H S C C C C C C C C H C C C H C C C C D C C C D D C S Image No. CYL REP 3.25X10X1.25 ROD (TIE) MW STOP BUSH SET 1 1/4 SBS125 NTA35 WING EYEBOLT WELDMENT WASHER LOCK 1 1/4 SPRING PLT NUT HEX JAM 1 1/4-7 PLT LEFT WING WELDMENT 607 GW ARM WDMT GRSLSS BUSHING CYL 1 1/4 X 1 X 1 BUSH SL TEF 1.25IDX1.50ODX1.5 PIN BENT.38X3.0 USBL W/PIN ANTIROTATION PIN 1.25 X PIN ROLL 3/8 X 2 1/2 PLT HHCS 5/8-11X2 1/2 GR5 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT CYLINDER LOCK CHANNEL 1 1/2 X 205MM X 12.6" HUB ASM TYRE 10.0/ PLY RIM 6 STUD 205MM PCD WHEEL ASSY 10.0/ PLY HHCS 3/4-10X2 1/4 GR5 WASHER LOCK SPRING 3/4 PLT NUT HEX JAM 1 1/2-12 PLT BRG CONE 1.50ID 13600LA90028 BRG CUP MM X 6 STUD WDMT HUB STUD M18X1.5X54 GR12.9 NUT LUG M18X1.5 X 24MM FLATS GREASE ZERK STRAIGHT 1/4-28 AXLE SHAFT WDMT TIRE 11LX15 LOAD F WHEEL 15X8 8 BOLT BUCKSKIN VALVE STEM TR415X.625X1 1/4 LG TIRE/WHL 11LX15LOAD F 8BLT BKS DRIVE SPINDLE YP L15 HUB SEAL Q458 (TCM TB-H) HUB 8-BOLT(45-8) ASY BRG, DUO-FACE W/SEAL LM67000LA SEAL KEEPER WASHER DRIVE SPINDLE SPACER NUT HEX JAM 1 1/4-12 PLT HUB & SPINDLE ASSEMBLY Includes items Used on "With Brake" option Includes 18 and 19. Used on "With Brake" option Used on "With Brake" option Used on "With Brake" option Used on "With Brake" option Used on "With Brake" option Used on "With Brake" option Used on "With Brake" option Used on "With Brake" option Used on "With Brake" option Used on "With Brake" option Used on "With Brake" option Used on "No Brake" option Used on "No Brake" option Used on "No Brake" option Includes Used on "No Brake" option Used on "No Brake" option. Used on "No Brake" option. Used on "No Brake" option. Used on "No Brake" option. Used on "No Brake" option. Used on "No Brake" option. Used on "No Brake" option. Includes Used on "No Brake" option. 10/11/ P

62 Table of Contents Gauge Wheel Scaper P /11/17

63 Table of Contents Implement Frame Gauge Wheel Scaper Ref. Part No. Part Description Comments Revision dwg D D D C C C C C Image No. SCRAPER MOUNT SCRAPER MOUNT L SCRAPER BLADE HHCS 1/2-13X1 1/2 GR5 RHSNB 1/2-13X1 1/2 GR5 NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1/2 SAE PLT 10/11/ P

64 Table of Contents Rear Transport Wheels P /11/17

65 Table of Contents Implement Frame Rear Transport Wheels Ref. Part No. Part Description Comments Revision dwg C C C C C C C S S H H C C C C C D C C D C D C C C D C D Image No. TYRE 10.0/ PLY TIRE 11LX15 LOAD F RIM 6 STUD 205MM PCD WHEEL 15X8 8 BOLT BUCKSKIN VALVE STEM TR415X.625X1 1/4 LG WHEEL ASSY 10.0/ PLY TIRE/WHL 11LX15LOAD F 8BLT BKS 205MM X 12.6" HUB ASM HUB & SPINDLE ASSEMBLY REAR CASTER WDMT REAR AXLE WELDMENT HHCS 3/4-10X8 GR5 PLT WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT PIN ROLL 3/16 X 2 1/2 LG. PTL. SPRING COMP.796ODX.065WX LOCK OUT PLUNGER HHCS 1/2-13X1 1/4 GR5 WASHER LOCK SPRING 1/2 PLT NTA CASTER RETAINER CAP BUSH SL TEF 3.00IDX3.50ODX4 3N40 HD BLK SED CSTR VER SHAFT THRUST BRG TEF 3ID HHCS 3/4-10X4 GR5 FTHD NUT HEX JAM 3/4-10 PLT PLATE RND 3/16" THK 1 7/8" DIA SPRING DIE 2 OD X 5 LONG 1040# UHMW RND 2.0 DIA X 2.0 LONG Used on machines with brakes. Used on machines without brakes. Used on machines with brakes. Used on machines without brakes. Used on machines without brakes. Includes 1 and 2 Includes 1-3. Used on machines without brakes. Used on machines with brakes. See Gauge Wheel Assembly for breakdown. Used on machines without brakes. See Gauge Wheel Assembly for breakdown. Used on machines with brakes. 10/11/ P

66 Table of Contents Center and Right Wing P /11/17

67 Table of Contents Implement Hydraulics Center and Right Wing Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C D C C Image No. CYL 3.5X16X2 ROD (TIE ROD) EL 3/4MORB 9/16MJIC TE 9/16MJIC 9/16MJIC 9/16FJIC HH3/8R /16FJIC HH3/8R /16FJIC NC POPPET SOLENOID VALVE EL 9/16MJIC 9/16FJIC TE 9/16MJIC 3/4MORB 9/16MJIC EL 45 9/16MJIC 9/16FJIC HH3/8R /16FJIC HH3/8R /16FJIC EL 3/4MJIC BLKHD EL 9/16MJIC BLKHD HH1/2R /4FJIC HH1/2R /4FJIC HH3/8R /4FJIC HH3/8R /16FJIC HH3/8R /16FJIC HH1/2R /4FJIC 3/4MORB HG HANDLE - GRAY RET HH1/2R /4FJIC HH3/8R /16FJIC HYD CYL REP 3.5X10X1.25 TIEROD EL 3/4MJIC 3/4MORB HH1/2R /4FJIC HH1/2R /4FJIC EL 3/4FJIC 3/4MJIC TE 3/4MJIC BULKHEAD AD BKHD 3/4MJIC HH1/2R /4FJIC HH1/2R /4FJIC CYL REP 3.25X10X1.25 ROD (TIE) CYL 4X30X2 TIE CL 3000# EL 9/16MORB 3/4MORB COUNTERBALANCE VALVE 10:1 SUN EL 9/16MJIC 9/16MORB HH3/8R /16FJIC HH3/8R /16FJIC HH3/8R /16FJIC PRESSURE REDUCING VALVE HHCS 1/4-20X2 GR5 WASHER FLAT 1/4 SAE PLT WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT HH3/8R /16FJIC CYL 1.5X2.5X.75 ROD (TIE ROD) HH3/8R /16FJIC FLOW CONTROL VALVE VALVE SUPPORT BRKT TE 9/16MJIC 9/16MJIC 9/16FJIC HH3/8R /16FJIC Refer to Hydraulic Cylinder ( C) for breakdown. Refer to Hydraulic Cylinder ( C) for breakdown. Refer to Hydraulic Cylinder ( C) for breakdown. Refer to Hydraulic Cylinder ( C) for breakdown. Refer to Pressure Reducing Valve ( C) for breakdown. Refer to Hydraulic Cylinder ( C) for breakdown. 10/11/ P

68 Table of Contents Center and Right Wing (continued) Ref Part No C C C C C C D C C C C R R c Part Description AD 9/16FJIC 3/4MORB AD 9/16MJIC 3/4MORB TE 9/16FJIC 9/16MJIC 9/16MJIC TE 9/16MORB 9/16MJIC 9/16MJIC CR 9/16MJIC VALVE PO CHECK 4:1 W/9/16FORB VALVE MOUNT PLATE AD 9/16MORB 9/16FJIC 6 PORT SOLENOID VALVE EL 45 3/4MORB 3/4MJIC HHCS 1/4-20X6 GR5 PLT SPIRAL HOSE WRAP 2.00 DIA SPIRAL HOSE WRAP 1 ID PLASTIC AD 3/4MJIC 9/16FJIC Comments Refer to Check Valve ( C) for breakdown. Revision P /11/17

69 Table of Contents Implement Hydraulics Center and Right Wing (continued) This Page Intentionally Left Blank 10/11/ P

70 Table of Contents Left Wing Hydraulics P /11/17

71 Table of Contents Implement Hydraulics Left Wing Hydraulics Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C D C C Image No. CYL REP 3.25X10X1.25 ROD (TIE) HH1/2R /4FJIC HH1/2R /4FJIC EL 3/4MJIC 3/4MORB EL 45 3/4MJIC 3/4FJIC AD BKHD 9/16MJIC EL 45 9/16MJIC 9/16FJIC AD BKHD 3/4MJIC HH3/8R /16FJIC HH1/2R /4FJIC HH3/8R /16FJIC HH3/8R /16FJIC EL 9/16MJIC 9/16MORB RELIEF VALVE 1350 PSI TAMP PRF TE 9/16MORB 9/16MJIC 9/16MJIC AD 9/16MORB 9/16FJIC AD 9/16MORB 9/16MJIC VALVE PRESS RED W/ CHK 1/16 OR EL 3/4MJIC 9/16MORB EL 3/4FJIC 3/4MORB FILTER INLINE 3/4FORB 3/4MJIC EL 3/4FJIC 3/4MJIC AD 9/16FJIC 1/4FNPT PRESSURE GAUGE 2000 PSI HHCS 1/4-20X2 1/4 GR5 WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT HH1/2R /2MNPT 3/4FJIC TE 3/4MJIC 3/4MJIC 3/4FJIC HH3/8R /16FJIC HH1/2R /4FJIC EL 45 3/4MORB 3/4MJIC HYDRAULIC BYPASS VALVE AD 9/16MJIC 3/4MORB HHCS 3/8-16X2 3/4 GR5 WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT VALVE MOUNT BRACKET U-BOLT 3/8-16 X 2 1/32 X 3 WASHER FLAT 1/4 SAE PLT Refer to Hydraulic Cylinder m c for breakdown. Refer to Relief Valve (810348C) for breakdown. Refer to Pressure Reducing Valve ( C) for breakdown. 10/11/ P

72 Table of Contents Hydraulic Cylinder ( P) P /11/17

73 Table of Contents Implement Hydraulics Hydraulic Cylinder ( P) Ref. Part No. Part Description Comments Revision dwg M6010-ADI 2M5418 3R2412 4R2109 5R2118 6R2164-ADI 7M5318 2A0024 2A C C C Image No. MIDWAY HARDENED CLEVIS ADI MW ROD 1 1/4 DIA X 10' STROKE MW HEAD PISTON MIDWAY TUBE MIDWAY MIDWAY ADI BASE TIE ROD MIDWAY WIPER SEAL O-RING BACK-UP O-RING BACK-UP TEFLON SEAL LOADER O-RING WEAR RING MW PISTON NUT 1-14 MW TIE ROD NUT NUT HEX 3/8-16 PLAIN HHCS 3/8-16X1 3/4 GR5 SEAL KIT MW 3.25 RPHCYL 4A2104 Only available in item 20 Only available in item 20 Only available in item 20 Only available in item 20 Only available in item 20 Only available in item 20 Only available in item 20 Only available in item 20 10/11/ P

74 Table of Contents Hydraulic Cylinder ( C) P /11/17

75 Table of Contents Implement Hydraulics Hydraulic Cylinder ( C) Ref. Part No. Part Description Comments Revision dwg M1190 2A0014 3M C 2A0130 2A0202 6M1108 7M1302 5M1103 2A0018 4M C Image No. MW ROD WIPER SEAL BACKUP O-RING MW TIE ROD NUT MW HEAD WASHER FLAT 5/8 SAE PLT MW COTTER PIN MW CLEVIS PIN MW BASE O-RING MW TIE ROD MW TUBE MW TIE ROD NUT MW PISTON BACKUP SEAL KIT MW 3A1102 Only available in item 17 Only available in item 17 Only available in item 17 Only available in item 17 Only available in item 17 10/11/ P

76 Table of Contents Hydraulic Cylinder ( C) P /11/17

77 Table of Contents Implement Hydraulics Hydraulic Cylinder ( C) Ref. Part No. Part Description Comments Revision dwg M7016 2M5690 3R3612 4M5108 5M5124 6R3162 7M5324 2A0206 2A0208 2A0024 2A0016 2A C 2A C Image No. CLEVIS ROD MIDWAY MW ROD MW HEAD MW PISTON MW TUBE 3-1/2 X 16 CYLINDER BASE MIDWAY MW TIE ROD MW PIN SHORT MW CLEVIS PIN WIPER SEAL O-RING BACKUP O-RING BACKUP MW PISTON NUT 1-14 MW TIE ROD NUT MW NUT HHCS 3/8-16X1 3/4 GR5 MW PIN CLIP SEAL KIT MW 5A5106 Only available in item 20 Only available in item 20 Only available in item 20 Only available in item 20 Only available in item 20 10/11/ P