Parts Manual. 3 Point Yield-Pro Planter with Air Pro Meter 3PYPA. Copyright 2018 Printed 01/04/ P

Transcription

1 Table of Contents Part Number Index Parts Manual 3PYPA 3 Point Yield-Pro Planter with Air Pro Meter Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! Cover illustration may show optional equipment not supplied with standard unit. Copyright 2018 Printed 01/04/ P

2 Table of Contents Table of Contents Part Number Index Section 1: Introduction...6 Using This Manual...6 Manual Replacement Information...6 Manual Revisions...6 Touch-up Paint...6 Hardware Legend...7 Replacement Hardware...7 Serial Numbers...7 Part Number Service Coding...7 Frame...8 Air Box...8 Down Pressure Hydraulics to Frame...10 Fan to Frame...12 Hopper Box To Frame...14 Mainframe...16 Mainframe To Rear Frame...18 Seed Delivery...20 Walkboard...24 Wing To Frame...26 LED Lights and Harness (S/N B1095J+)...28 Lights And Harness (S/N B1094J-)...30 Row-Pro and Tru-Count Compressor Mounts...32 Fan and Air Assembly...34 Air Delivery 15" Spacing...36 Air Delivery 30" Single and 30" Twin Row Spacing...38 Air Delivery 36" 38" 40" Single and 36" 38" 40" Twin Row Spacing...40 Air Pressure Assembly...42 Transport...44 Hydraulic Steering (S/N B1026J-)...44 Hydraulic Steering (S/N B1027J+)...46 Transport Casters And Wheels (S/N B1026J-)...48 Transport Casters And Wheels (S/N B1027J+)...50 Drive...53 Contact Drive...54 Contact Drive Gauge Wheel...58 Hydraulic Drive...62 Hydraulic Drive Components...66 Non Drive Contact Gauge Wheel...68 Transmission Drive...70 Tru-Count Clutch Assembly...72 Meter Series Air Meter Assembly Series Air Meter Assembly Air Meter Timing Tool...84 Opener...86 Opener Arms & Mounts...86 Opener Body...88 Row-Pro...92 Copyright 2018 All rights reserved Printed 01/04/18 Hub Assembly ( C & S)...96 Rigid 13" Row Cleaner...98 Row Cleaner Unit Mount Assembly Row Cleaner Extension Mount Seed Lok Side Depth Wheel Assembly Series Side Depth Wheel Scraper Assembly Series Keeton Seed Firmer (Option) Single Arm RC Assembly Unit Mount Coulter Press Wheels Press Wheel Assembly (S/N B1027J-) Press Wheel Assembly (S/N B1028J - B1072J) D Cast Press Wheels (S/N B1073J+) Press Wheel Assembly 1X12 & 1.25X13.5 (S/N B1073J+) Press Wheel Assembly Front With Cast Wheels Press Wheel Assembly Rear With Cast Wheels Press Wheel Assembly LH Short (S/N B1027J-) Press Wheel Assembly LH Short (S/N B1028J - B1072J.130 Press Wheel Assembly RH Long (S/N B1027J-) Press Wheel Assembly RH Long (S/N B1028J - B1072J) Press Wheel Assembly With Spider Wheels (S/N B1027J-) Press Wheel Assembly With Spider Wheels (S/N B1028J - B1027J) Press Wheel Assembly With Spider Wheels (S/N B1073J+) Closing Wheel Drop mount Press Wheel Breakdown Hydraulics Down Pressure and Lift Hydraulics Fan And Steering Hydraulics (S/N B1026J-) Fan And Steering Hydraulics (S/N B1027J - B1108J) Fan and Steering Hydraulics (S/N B1109J+) Lift Hydraulics (For planters w/locked wings only) Lift with Flex Wing Hydraulics Wing Fold And Marker Hydraulics Wing Fold Hydraulics (For planters w/o markers only) Hydraulic Hose Grips Fasse 3 Way Multiplier ( C) Hydraulic Cylinder C (5 x 29.5 x 1.50) Hydraulic Cylinder C (3 x 13 x 1.25 Rod) Hydraulic Cylinder C (3.25 x 13 x 1.25 Rod) Hydraulic Cylinder C (3 x 24 x 1.5 Rod) Hydraulic Cylinder (3 x 8 x 1.25 Rod) Hydraulic Cylinder C (4 x 4 x 1.25 Rod) Hydraulic Cylinder C (2 x 13 x Rod) Hydraulic Cylinder C (3 x 8 x 1.5 Rod) Great Plains Manufacturing, Inc. provides this publication as is without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. Great Plains Manufacturing, Incorporated Trademarks The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains All other brands and product names are trademarks or registered trademarks of their respective holders. Printed in the United States of America P /04/18

3 Table of Contents Part Number Index Table of Contents (continued) Hydraulic Cylinder C (3 x 8 x 1.5 Rod) Hydraulic Cylinder C (3 x 15 x 1.5 Rod) Hydraulic Cylinder C (3 x 15 x 1.5 Rod) Pilot Operated Check Valve ( C) Pressure Reducing Valve ( C) Sequence Valve ( C) Steering Control Valve ( ) Decals Decals Monitor Monitor and Frame Control Marker Marker Marker Disk And Hub ( S) Fertilizer Fertilizer Contact Wheel Breakdown (S/N B1043J-) Fertilizer Contact Wheel Breakdown (S/N B1044J+)..216 Fertilizer Contact Wheel Lock Up (S/N B1055J+) Fertilizer Plumbing John-Blue Pump ( C) Options Fasse Switch Box Linear Steering Sensor ( S) Steering Controls (S/N B1126J-) Part Number Index /04/ P

4 Table of Contents Alphabetized Table of Contents Part Number Index Selected Models D Cast Press Wheels (S/N B1073J+) Series Air Meter Assembly Series Air Meter Assembly Series Keeton Seed Firmer (Option) Series Side Depth Wheel Scraper Assembly A Air Box...8 Air Delivery 15" Spacing...36 Air Delivery 30" Single and 30" Twin Row Spacing...38 Air Delivery 36" 38" 40" Single and 36" 38" 40" Twin Row Spacing...40 Air Meter Timing Tool...84 Air Pressure Assembly...42 C Closing Wheel Drop mount Contact Drive...54 Contact Drive Gauge Wheel...58 D Decals Down Pressure and Lift Hydraulics Down Pressure Hydraulics to Frame...10 F Fan and Air Assembly...34 Fan And Steering Hydraulics (S/N B1026J-) Fan And Steering Hydraulics (S/N B1027J - B1108J) Fan and Steering Hydraulics (S/N B1109J+) Fan to Frame...12 Fasse 3 Way Multiplier ( C) Fasse Switch Box Fertilizer Contact Wheel Breakdown (S/N B1043J-) Fertilizer Contact Wheel Breakdown (S/N B1044J+) Fertilizer Contact Wheel Lock Up (S/N B1055J+) Fertilizer Plumbing H Hopper Box To Frame...14 Hub Assembly ( C & S)...96 Hydraulic Cylinder C (5 x 29.5 x 1.50) Hydraulic Cylinder C (3 x 13 x 1.25 Rod) Hydraulic Cylinder C (3.25 x 13 x 1.25 Rod) Hydraulic Cylinder C (3 x 24 x 1.5 Rod) Hydraulic Cylinder (3 x 8 x 1.25 Rod) Hydraulic Cylinder C (4 x 4 x 1.25 Rod) Hydraulic Cylinder C (2 x 13 x Rod) Hydraulic Cylinder C (3 x 8 x 1.5 Rod) Hydraulic Cylinder C (3 x 8 x 1.5 Rod) Hydraulic Cylinder C (3 x 15 x 1.5 Rod) Hydraulic Cylinder C (3 x 15 x 1.5 Rod) Hydraulic Drive...62 Hydraulic Drive Components...66 Hydraulic Hose Grips Hydraulic Steering (S/N B1026J-)...44 Hydraulic Steering (S/N B1027J+)...46 J John-Blue Pump ( C) L LED Lights and Harness (S/N B1095J+)...28 Lift Hydraulics (For planters w/locked wings only) Lift with Flex Wing Hydraulics Lights And Harness (S/N B1094J-)...30 Linear Steering Sensor ( S) M Mainframe...16 Mainframe To Rear Frame...18 Marker Marker Disk And Hub ( S) Monitor and Frame Control N Non Drive Contact Gauge Wheel...68 O Opener Arms & Mounts...86 Opener Body...88 P Pilot Operated Check Valve ( C) Press Wheel Assembly (S/N B1027J-) Press Wheel Assembly (S/N B1028J - B1072J) Press Wheel Assembly 1X12 & 1.25X13.5 (S/N B1073J+) Press Wheel Assembly Front With Cast Wheels Press Wheel Assembly LH Short (S/N B1027J-) Press Wheel Assembly LH Short (S/N B1028J - B1072J.130 Press Wheel Assembly Rear With Cast Wheels Press Wheel Assembly RH Long (S/N B1027J-) Press Wheel Assembly RH Long (S/N B1028J - B1072J) Press Wheel Assembly With Spider Wheels (S/N B1027J-) Press Wheel Assembly With Spider Wheels (S/N B1028J - B1027J) Press Wheel Assembly With Spider Wheels (S/N B1073J+) Press Wheel Breakdown Pressure Reducing Valve ( C) R Rigid 13" Row Cleaner...98 Row Cleaner Extension Mount Row Cleaner Unit Mount Assembly P /04/18

5 Table of Contents Part Number Index Alphabetized Table of Contents (continued) Row-Pro...92 Row-Pro and Tru-Count Compressor Mounts...32 S Seed Delivery...20 Seed Lok Sequence Valve ( C) Side Depth Wheel Assembly Single Arm RC Assembly Steering Control Valve ( ) Steering Controls (S/N B1126J-) T Transmission Drive...70 Transport Casters And Wheels (S/N B1026J-)...48 Transport Casters And Wheels (S/N B1027J+)...50 Tru-Count Clutch Assembly...72 U Unit Mount Coulter W Walkboard...24 Wing Fold And Marker Hydraulics Wing Fold Hydraulics (For planters w/o markers only).164 Wing To Frame /04/ P

6 Table of Contents Part Number Index P /04/18

7 Table of Contents Part Number Index 01/04/ P

8 Air Box Table of Contents Part Number Index P /04/18

9 Air Box Table of Contents Part Number Index Frame Ref. Part No. Part Description Comments Revision dwg C C H H C H C C C C C S D C H H C C C C C D C D D H D D C C D C H C C H C Image No. SEAL TOP CORNER AUX METER TOP SEAL SEED STRAINER GRATE WLDMNT SEAL HOLDER WELDMENT HHCS 1/4-20X5/8 GR5 CORNER SEAL MOUNT WLDMNT WASHER FLAT 1/4 USS PLT HHCS 1/4-20X1 GR5 WASHER LOCK SPRING 1/4 PLT WASHER FLAT 1/4 SAE PLT NUT HEX 1/4-20 PLT DJ BIN LEVEL SENSOR HOPPER LEVEL SENSOR SHROUD DECAL TALC LUBRICANT YP WIDE FILL TOP WELDMENT RICE MANIFOLD MAIN WELDMENT HHCS 3/8-16X1 1/4 GR5 WASHER FLAT 3/8 USS PLT WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT HHCS 5/16-18X5/8 GR5 YP MANIFOLD ACCESS DOOR YP MANIFOLD ACCESS DOOR GASKET SEED CHAMBER DIVIDER RH SEED CHAMBER DIVIDER LH AIR BOX VANE WLDMNT MANIFOLD SLAT MOUNT PLT MANIFOLD TOP SLAT COVER SCREW SPAX #8X3/4 PAN HEAD NUT LOCK M16X2 AIR FLOW UPPER GUIDE CAP PLUG 1 1/2 O.D. TUBE MANIFOLD INLET WIDE YP DESTACO HOLD DOWN ACTION CLAMP DOOR SEAL, PLANTER MANIFOLD MANIFOLD UNLOAD DOOR HHCS 1/4-20X1 1/2 GR5 01/04/ P

10 Table of Contents Down Pressure Hydraulics to Frame Part Number Index P /04/18

11 Table of Contents Part Number Index Frame Down Pressure Hydraulics to Frame Ref. Part No. Part Description Comments Revision dwg C C C D H C C C Image No. PIN COTTER 3/16 X 2 1/4 PLT PIN CLEVIS 1 1/4 X 2.69 GR5 CYL 4 X 4 X 1.25 CLEVIS 1 1/4 ROD END W/SLOT LUG WELDMENT HHCS 3/8-16X2 GR5 NUT NYLOCK JAM THIN 3/8-16 PLT WASHER FLAT 1 1/4 SAE PLT Refer to "Hydraulic Cylinder C (4 x 4 x 1.25 Rod)" for breakdown Use in place of hydraulic cylinders 01/04/ P

12 Fan to Frame Table of Contents Part Number Index P /04/18

13 Fan to Frame Table of Contents Part Number Index Frame Ref. Part No. Part Description Comments Revision dwg C C C C H C C C S C C C C C C C C C C C C Image No. U-BOLT 5/8-11 X 7 1/32 X 8 1/2 WASHER FLAT 5/8 SAE PLT WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT SUPRT FAN 3PYP SPLT AIR NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT HHCS 1/2-13X3 1/4 GR5 AIR VALVE ASSY 1-6" X 2-4" HHCS 3/8-16X3/4 GR5 WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT 8 HYDRAULIC FAN KIT W/ SCREEN HHCS 1/2-20X1 1/2 GR5 WASHER FLAT 1/2 SAE PLT PLATE, FAN MOTOR 8 IN, B PILOT HHCS 3/8-16X1 1/2 GR5 HYD MOTOR PARKER 330C 0.99CIR HYD MTR HYDROLEDUC MA18 1.1CIR NUT HEX 1/2-20 PLT WASHER FLAT 3/8 SAE PLT Refer to Fan and Air Assembly for breakdown Refer to Fan and Air Assembly for breakdown (S/N B1108J-) (S/N B1109J+) 01/04/ P

14 Table of Contents Hopper Box To Frame Part Number Index P /04/18

15 Table of Contents Part Number Index Frame Hopper Box To Frame Ref. Part No. Part Description Comments Revision ** dwg H H D D C C C C C C C C C C C C S C C C C C H C C C D C D D C C C C C C C D H C C C C C D C C C C C C C H Image No. BEAN HOPPER SUPPORT FRAME BULK HOPPER UNLOAD DOOR GUIDE HOPPER RETAINER SIDE BAR BULK HOPPER UNLOAD DOOR HHCS 1/4-20X1 1/2 GR5 HHCS 1/2-13X1 1/4 GR5 HHCS 5/8-11X2 GR5 HHCS 1/4-20X1 1/4 GR5 NUT HEX 5/8-11 PLT NUT HEX LOCK 1/4-20 FLG WASHER FLAT 1/4 SAE PLT WASHER LOCK SPRING 1/2 PLT WASHER LOCK SPRING 5/8 PLT RD BUMP STOP 2 X 1 X 1/2-13 HOPPER DOOR TOP SEAL BULK PLANTER SEED HOPPER W/LID DJ BIN LEVEL SENSOR HHCS 1/4-20X3/4 GR5 TALC LUBRICANT-5 GAL CONTAINER EZEE-GLIDE PLUS LUBRICANT-5GAL WASHER FLAT 5/8 SAE PLT HHCS 1/4-20X1 3/4 GR5 HOPPER WATER GUARD WLDMNT WASHER FLAT 1/2 SAE PLT HHCS 1/4-20X1 GR5 WIRE BASKET HOPPER STRAINER BASKET SUPPORT NUT HEX FLANGE 1/4-20 PLT BRACKET AIR TRANSFER TUBE CAP HHCS 7/16-14X1 GR5 NUT HEX 1/4-20 PLT NUT HEX 7/16-14 PLT WASHER LOCK SPRING 1/4 PLT WASHER LOCK 7/16 PLT WASHER FLAT 7/16 SAE PLT RUBBER GUARD REAR CTR.OUTER 82 BU AIR PRESSURE PIPE LOWER AIR PIPE SUPPORT 82 YP PIN HITCH 1/2 X 6 1/4 W CHAIN DESTACO 331-R CLAMP ASSEMBLY HHCS 1/4-20X3/4 SS BIN LID SEAL SPACER RHSNB 5/16-18X1 GR5 82 BIN LID LATCH HOOK PLT BIN LID SEAL HHCS 3/8-16X3 3/4 GR5 LID, BULK PLANTER SEED HOPPER HHCS 5/16-18X1 1/4 GR5 WASHER FLAT 5/16 USS PLT NUT LOCK 3/8-16 NYLON INSERT NUT HEX FLG TP LK 5/16-18ZNYCR LID HINGE YP BULK HOPPER SHORT 01/04/ P

16 Mainframe Table of Contents Part Number Index P /04/18

17 Mainframe Table of Contents Part Number Index Frame Ref. Part No. Part Description Comments Revision dwg H C C C C C H D D C H C H C H C C C H C C C D D D D C H C C D C H C C D Image No. BRKT TOP LINK WIDE WLDMT PIN ROLL 1/4 X 2 1/2 PLT PIN CLEVIS 1 1/4 X 6 USABLE HHCS 3/4-10X8 GR5 PLT WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT LEG PARK STAND OUTER PLATE, SLIDER TOP LINK TUBE 2.25OD X 1.38IDX.94LNG PIN CLEVIS 1 1/4 X 5 3/16 USBL 3PYP MAST ASSEMBLY HHCS 3/4-10X3 GR5 LEG PRK STD HHCS 3/4-10X2 3/4 GR5 HITCH 3PYP OFFSET F/TOP LNK NUT HEX 5/8-11 PLT SCRW SET SKT HD5/8-11X2 BLACK HHCS 1/2-13X4 FTHD PIN HITCH WELD W/ TAB WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT NUT HEX 3/4-10 PLT NYLOCK LOWER 3PT PIN SPACER 1/2 THK LOWER 3PT PIN SPACER 1/4 THK TUBE 3" X 1 1/2" X 1/2" LONG PIN 1 1/4 X 6.75 LONG U-BOLT 3/4-10 X 7 X 8 1/2 BRACKET PRK STD SUP WLDMT HHCS 3/4-10X6 1/2 GR5 PIN HITCH 3/4 X 5 1/4 USEABLE BRKT FRWD STR VLV BLK PIN, HAIR COTTER 3/16 WIRE DIA SPACER 3 PT 1 1/2 X 2 HHCS 1/2-13X1 3/4 GR5 HHCS 1/2-13X2 1/4 GR5 SHIM HITCH FLANGE Use as needed Use as needed Use as needed 01/04/ P

18 Table of Contents Mainframe To Rear Frame Part Number Index P /04/18

19 Table of Contents Part Number Index Frame Mainframe To Rear Frame Ref. Part No. Part Description Comments Revision dwg C C D C C C C C C C H H C H H C C C C D S C C C C C H C C Image No. HHCS 1-8X18 GR5 WASHER FLAT 1 SAE 40P CASTER INNER PIVOT TUBE NUT HEX 1-8 PLT WASHER LOCK SPRING 1 PLT BUSHING SPINDLE 1 1/2X1 1/4X1 PIN CLEVIS 1 X 3 11/16 PLT BUSHING 1 7/8X1 5/8X1 1/2 SPLT PIN CLEVIS 1 X 3 5/16 HRD PLT PIN COTTER 3/16 X 1 3/4 PLT BRKT PARL ARM MOVABLE 40P CASTER PARALLEL ARM WLDMT GREASE ZERK STRAIGHT 1/4-28 TOOLBAR CTR W/SEED SUPPORT WLD SEED BIN SUPPORT STRCTR ASM BUSHING CYL 1 1/4 X 1 X 1 HHCS 5/8-11X2 1/4 GR5 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT BRKT LIFT SWITCH 3PYP DJ SWITCH SPDT W/WISKER & WIRE HHCS 5/16-18X1 1/2 GR5 WASHER FLAT 5/16 USS PLT NUT HEX 5/16-18 PLT CYL 2X13X1.125 ROD (TIE) PIN COTTER 3/16 X 2 1/4 PLT HOOK WLDMT HHCS 3/8-16X3 1/2 GR5 NUT LOCK 3/8-16 NYLON INSERT Refer to Hydraulic Cylinder ( C) for breakdown Shear Bolt 01/04/ P

20 Seed Delivery Table of Contents Part Number Index P /04/18

21 Seed Delivery Table of Contents Part Number Index Frame Ref. Part No. Part Description Comments Revision dwg C D C C C C C H H H H H H C S S C C C C C C D D C C C C C C R C H C C C H C C D C C H H C C C C C D C C C C C C C Image No. HHCS 3/8-16X1 1/4 GR5 SUPPORT L WING SEED TUBE OUTER CAP PLUG 1 1/2 O.D. TUBE SEED DISCHARGE HOSE 42 HOSE BOOT LOCK RING WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT SUPPORT L WING SEED TUBE 36IN SUPPORT R WING SEED TUBE 36IN SUPPORT L WING SEED TUBE 38IN SUPPORT R WING SEED TUBE 38IN SUPPORT L WING SEED TUBE 30IN SUPPORT R WING SEED TUBE 30IN CLAMP WRM DRV #24 SS (1.06-2) PLANTER Y-TRANSITION ASY AIR PLANTER ADPTR W/GATE TUBE SEED DELIVERY 83 AL TUBE SEED DELIVERY 98 AL SEED DELIVERY TUBE 073 AL U-BOLT 5/16-18X1 1/2X2 1/2 RND WASHER FLAT 5/16 USS PLT NUT HEX NYLOCK 5/16-18 PLT AIR TUBE SUPPORT CLAMP BRACKET SEED TUBE SUPPORT (4) HHCS 5/16-18X2 1/2 GR5 TUBE SEED DELIVERY 46 AL SEED DELIVERY TUBE 042 AL TUBE SEED DELIVERY 10 AL TUBE SEED DELIVERY 13 AL TUBE SEED DELIVERY 98 AL SEED HOSE 1 1/2 CLEAR W/ RIBS TUBE SEED DELIVERY 45 AL BRACKET WING SEED TUBE WLDMT HHCS 1/2-13X3 GR5 WASHER FLAT 1/2 USS HARD PLT NUT HEX 1/2-13 PLT SUPPORT Y-SPLITTER WASHER LOCK SPRING 1/2 PLT IDLER SPOOL # X1.01X1.31 TUBE RND 1 OD X 7/32W X 2.13 HHCS 1/2-13X3 3/4 GR5 WASHER FLAT 5/8 SAE PLT SUPPORT REAR SEED TUBE SUPRT FAN 3PYP SPLT AIR U-BOLT 5/8-11 X 7 1/32 X 8 1/2 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT TUBE CAP 1 1/4 ID TB X 3 LG O-RING 1 1/2 IDX1 7/8 ODX3/16 AIR PLANTER HOSE SPLITTER SHOULDER BOLT 1/4X1/4X10-24 Y-TUBE GATE TUBE SEED DELIVERY 53 AL TUBE SEED DELIVERY 30 AL SEED DELIVERY TUBE 60 AL TUBE SEED DELIVERY 50 AL TUBE SEED DELIVERY 10 AL 36" LH Outer Wing 36" RH Outer Wing 38" LH Outer Wing 38" RH Outer Wing 40" LH Outer Wing 40" RH Outer Wing Includes items 9 & Includes items 9, 38, 40, 41 & 47 36" & 38" LH/RH Outer Wing 30" LH/RH Outer Wing 40" LH/RH Outer Wing 30", 36", 38" & 12 Row 30" & 16 Row Rear, 36" & 38" LH/RH 40" LH/RH Center 30", 36" & 38" LH/RH Center 30" LH/RH Outer Wing 40" LH/RH Outer Wing 38" RH/RH Inner Wing Inner Wing Rear Center 38" LH/RH Center 38" LH/RH Center 40" LH/RH Center 36" LH/RH Center 36" LH/RH Center 01/04/ P

22 Table of Contents Seed Delivery (continued) Part Number Index Ref Part No C D C C D Part Description SEED DELIVERY TUBE 24 AL CLAMP, HOSE ROUTE 6 INCH WASHER FLAT 5/16 SAE PLT NUT HEX NYLOCK 5/16-18 PLT AIR PLANTER ADPTR W/GATE Comments 40" LH/RH Center Revision P /04/18

23 Table of Contents Part Number Index Frame Seed Delivery (continued) This Page Intentionally Left Blank 01/04/ P

24 Walkboard Table of Contents Part Number Index P /04/18

25 Walkboard Table of Contents Part Number Index Frame Ref. Part No. Part Description Comments Revision dwg H H H H D D D H C C C C D C C D C C C C C C C D H D C C C C D C C C C C C C C C C C D C C C C C H Image No. YP WALKBOARD SUPPORT YP WALKBOARD WLDMMT HOOP HANDRAIL WELDMENT UPPER RAIL WLDMNT RAIL PIVOT MOUNT RH RAIL PIVOT MOUNT LH TOP RAIL MIDDLE SECTION YP LADDER WELDMT U-BOLT 3/4-10X4 1/32X4 1/2 PIN WIRE SNAP LOCK 3/8 X 3 1/2 HHCS 3/8-16X2 GR5 NUT LOCK 3/8-16 PLT WALKBOARD LADDER PIVOT BUSHING HHCS 3/8-16X1 1/4 GR5 HHCS 3/8-16X2 3/4 GR5 MARKER PIVOT PIN BUSHING 1 3/4 X 1 1/2 X 1 1/2 GREASE ZERK STRAIGHT 1/4-28 HHCS 3/4-10X2 GR5 WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT PIN ROLL 3/16 X 2 1/2 LG. PTL. SPRING COMP 1/2 OD X 1 LG 6 BOLT LOCKOUT PLUNGER WRENCH HOLDER SPRING AND WHEEL WRENCH PIN, HAIR COTTER 3/16 WIRE DIA NUT FLANGE LOCK 3/8-16 PLT HFS 3/8-16X1 GR5 MANUAL PAK 1'" W/ GASKET YP SMV MANUAL PAK HANGER MINI END WHEEL PRESS WHEEL NUT HEX FLNG T-LOCK 1/4-20 YLW HHCS 5/16-18X3/4 GR5 HHCS 1/4-20X1 GR5 NUT-HEX 1/4-20 PLT WASHER LOCK SPRING 1/4 PLT DECAL SLOW MOVING-GALV. BACKED SCREW RD HD 1/4-20 X 5/8 NUT HEX 5/16-18 PLT WASHER LOCK SPRING 5/16 PLT SMV MOUNTING BLADE LATCH WALKBOARD HOLD OPEN S-HOOK # X 1 1/8 PLT HHCS 1/2-13X1 1/2 GR5 WASHER FLAT 1/2 SAE PLT NUT LOCK 1/2-13 PLT STEP EXTENSION RUBBER STEP SINGLE BOLT-ON 01/04/ P

26 Wing To Frame Table of Contents Part Number Index P /04/18

27 Wing To Frame Table of Contents Part Number Index Frame Ref. Part No. Part Description Comments Revision dwg H H H H H H H H C H H C C C C D D D C C C C C C C C C C C C D C C C C Image No. TOOLBAR CTR W/SEED SUPPORT WLD LINK ARM LOWER WLDMT STACKING WING WLDMT LEFT STACKING WING ASM RIGHT ARM UPPER LINK WLDMT LFT ARM UPPER LINK WELD RT CYL LOCK CHANNEL 1 1/2X17 3/4 FLEX ARM WELDMENT 11.5 DEG CYL 5X29.5X1.5 ROD CYL PIN NR 1.25X3.63USBX3.13CH LINK UPPER LIFT ARM WLDMT NUT HEX 1 1/2-6 PLT PIN CLEVIS 1 1/4 X 3 3/8 GR5 GREASE ZERK 1/4-28 X 90-DEG GREASE ZERK STRAIGHT 1/4-28 PIN 1 1/4 X 11 1/4 W/HOLE PIN 1 3/4 X 19 5/8 W/HOLE PIN 1 1/2 X PIN ROLL 3/8 X 2 1/2 PLT PIN ROLL 1/4 X 2 1/2 PLT PIN LINCH 5/16 X 2 11/32 HHCS 3/8-16X2 1/2 GR5 NUT LOCK 3/8-16 NYLON INSERT PIN 3/8 X 3 USABLE LW/PIN BUSHING 1 1/2 X 1 1/4 X 1 1/2 BUSHING 2 X 1 3/4 X 2 HHCS 1/2-13X3 1/4 GR5 NUT LOCK 1/2-13 PLT GREASE ZERK 1/4-28 X 45-DEG BUSHING SPINDLE 1 1/2X1 1/4X1 PAD STOP BLOCK HHCS 1/2-13X1 3/4 GR5 NUT HEX 1/2-13 PLT WASHER FLAT 5/8 USS PLT WASHER FLAT 1 1/4 SAE PLT Refer to "Hydraulic Cylinder C (5x29.5x1.5 Rod)" for breakdown Formerly C 01/04/ P

28 Table of Contents Part Number Index LED Lights and Harness (S/N B1095J+) P /04/18

29 Table of Contents Part Number Index Frame LED Lights and Harness (S/N B1095J+) Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C Image No. LIGHT, RED LAMP - LED HHCS 5/16-18X1 1/4 GR5 WASHER LOCK SPRING 5/16 PLT HOSE CLIP 13/16 ID 7-PIN CONNECTOR HOLDER AG HARNESS, 10' LEAD - LED LIGHT HRNSS ENHANCE MODULE LED LIGHT, AMBER LAMP LED AG HARNESS, REAR 21' LED SCREW HEX SELF TAP 1/4-20X3/4 01/04/ P

30 Table of Contents Lights And Harness (S/N B1094J-) Part Number Index P /04/18

31 Table of Contents Part Number Index Frame Lights And Harness (S/N B1094J-) Ref. Part No. Part Description Comments Revision dwg X X8177_ C C C C C C Image No. SINGLE AG LAMP, AMBER/AMBER SINGLE AG LAMP, RED/BLANK 7-PIN CONNECTOR HOLDER AG MODULE ASSY AG HARNESS, 10' 7-WAY TO 4-WAY AG HARNESS, REAR 21' HHCS 5/16-18X1 1/4 GR5 HOSE CLIP 13/16 ID WASHER LOCK SPRING 5/16 PLT SCREW RD HD X 1 PLT NUT HEX NYLOCK PLT SCREW HEX SELF TAP 1/4-20X3/4 01/04/ P

32 Table of Contents Part Number Index Row-Pro and Tru-Count Compressor Mounts P /04/18

33 Table of Contents Part Number Index Frame Row-Pro and Tru-Count Compressor Mounts Ref. Part No. Part Description Comments Revision dwg C D C C D C C C D C D C D D C C C D Image No. HHCS 3/8-16X3/4 GR5 RP COMPRESSOR COVER SIDE WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT COMPRESSOR MOUNT BRACKET WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT TRU-COUNT COMPRESSOR ASSEMBLY MOUNT PLATE HHCS 3/8-16X1 GR5 COMPRESSOR MOUNT 12V AIR COMPRESSOR TC COMPRESSOR COVER SIDE R 12 COMPRESSOR COVER TOP HOSE CLIP 5/8 I.D. WASHER FLAT 3/8 SAE PLT U-BOLT 5/8-11 X 7 1/32 X 8 1/2 TC COMPRESSOR COVER SIDE L 01/04/ P

34 Table of Contents Fan and Air Assembly Part Number Index P /04/18

35 Table of Contents Part Number Index Frame Fan and Air Assembly Ref. Part No. Part Description Comments Revision dwg C CRARY CRARY CRARY C CRARY C C CRARY C C C C C C C C C C C C C D C C H C H C H C D C C D C D C D C H C D C C D H C C C D D Image No. HHCS 3/8-16X1 1/4 GR5 FAN 8 IN HOUSEING, RH FAN 8 IN IMPELLER FAN 8 IN HOUSING, LH NUT HEX FLANGE 3/8-16 PLT FAN 8 IN SCREEN WA WASHER FLAT 3/8 USS PLT HHCS 3/8-16X1 GR5 FAN 8 IN SCREEN CAP 8 HYDRAULIC FAN KIT W/ SCREEN HYD MOTOR PARKER 330C 0.99CIR HYD MTR HYDROLEDUC MA18 1.1CIR NUT HEX 1/2-20 PLT WASHER LOCK SPRING 1/2 PLT HHCS 3/8-16X1 1/2 GR5 WASHER LOCK SPRING 3/8 PLT PLATE, FAN MOTOR 8 IN, B PILOT NUT HEX 3/8-16 PLT NUT LOCK 1/4-20 PLT BUSHING, JA X 1.00 X 1/4 KEYW FAN INLET RAIN SHIELD HWH #12-14X3/4 BRACKET SPEED SENSOR CRARY 8IN CLAMP 8 INCH WORM DRIVE HOSE 8.0 ID DUCTING X 0.4 FT AIR VALVE INLET 8 INCH HHCS 1/4-20X1/2 GR5 AIR VALVE BOX WELDM WASHER FLAT 1/4 SAE PLT CRARY FAN SHUTTER HFS X 3/4 PLT CRARY FAN SHUTTER DISK NUT HEX NYLOCK PLT NUT HEX FLANGE 1/4-20 PLT BRACKET, AIR VALVE ANCHOR WASHER LOCK SPRING 1/4 PLT POINTER, AIR VALVE HHCS 5/16-18X1 GR5 COUPLER 1/2" SHAFT W/ FLATS NUT HEX 5/16-18 PLT DJ ACTUATOR ROTARY AIR VALVE OUTLET 1-6" X 2-4" HHCS 1/4-20X1 GR5 PLATE, AIR VALVE VANE BUSHING 1/2IDX5/8ODX1/2 FLANGE WASHER MACH 1.19 X.63 X 18GA SHAFT, AIR VALVE VANE AIR VALVE OUTLET 6 INCH X1 HHCS 1/4-20X3/4 GR5 NUT HEX 1/4-20 PLT HHCS 1/4-20X2 GR5 TUBE 5/8 X 10GA X 1.2 ACTUATOR ADAPTER PLATE Includes items 1-9 (S/N B1108J-) (S/N B1109J+) (S/N B1055J-) (S/N B1055J-) (S/N B1055J-) 01/04/ P

36 Table of Contents Air Delivery 15" Spacing Part Number Index P /04/18

37 Table of Contents Part Number Index Frame Air Delivery 15" Spacing Ref. Part No. Part Description Comments Revision dwg C C C C D D D D D D C D D C C C C C D C C C D C C C S D C D D D D C R R C C C D D Image No. CAP PLUG DWV ABS 4 INCH SCREW HEX SLT 10-16X3/4 PLT TEE DWV ABS 4 X 4 X 4 ADAPT DUCTING 4 X SING 2 TUBE ABS DWV 4 IN X 11.8 LONG TUBE ABS DWV 4 IN X 24.8 LONG ORIFICE PLATE 4 OD X 3.3 ID TUBE ABS DWV 4 IN X 16.6 LONG ORIFICE PLATE 4 OD X 3.4 ID TUBE ABS DWV 4 IN X 3.5 LONG EL 4 X 90DEG ABS TUBE ABS DWV 4 IN X LONG TUBE ABS DWV 4 IN X 6 LONG HHCS 1/4-20X5/8 GR5 NUT LOCK 1/4-20 PLT TEE, 6 IN TO 4 IN CLAMP WRM DRV #96SS ( ) HOSE 6.0 ID DUCTING X 1.2 FT CLAMP, MANIFOLD 4 INCH HHCS 5/16-18X2 1/2 GR5 WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT BRKT AIR TUBE U-BOLT 5/8-11 X 7 1/32 X 8 1/2 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT SENSOR CHAMBER ASY TUBE SQ 1 1/2X14GX76.0 U-BOLT 5/16-18 X 1 17/32X2 1/8 TUBE ABS DWV 4 IN X 7.1 LONG TUBE ABS DWV 4 IN X 20.8 LONG ORIFICE PLATE 4 OD X 3.2 ID TUBE RND 4 OD X.083WL X 4 L CLAMP WRM DRV #32SS ( ) HOSE 2 ID POLYP HELIX HOSE 1/4 RUBBER AIR HOSE 6.0 ID DUCTING X 10.7 FT HOSE 4.0 ID DUCTING X 10.8 FT CLAMP WRM DRV ( ) BRKT CENTER AIR MANIF ADAPT DUCTING 4 X SING 2 ORIFI Refer to Air Pressure Assembly For Breakdown 01/04/ P

38 Table of Contents Part Number Index Air Delivery 30" Single and 30" Twin Row Spacing P /04/18

39 Table of Contents Part Number Index Frame Air Delivery 30" Single and 30" Twin Row Spacing Ref. Part No. Part Description Comments Revision dwg C C C C C D D D D D D C D D C C C C C D C C C D C C C S D C D D D D C R R C C C D Image No. CAP PLUG DWV ABS 4 INCH SCREW HEX SLT 10-16X3/4 PLT TEE DWV ABS 4 X 4 X 4 ADAPT DUCTING 4 X SING 2 ADAPT DUCTING 4 X DBBL 2 TUBE ABS DWV 4 IN X 11.8 LONG TUBE ABS DWV 4 IN X 24.8 LONG ORIFICE PLATE 4 OD X 3.3 ID TUBE ABS DWV 4 IN X 16.6 LONG ORIFICE PLATE 4 OD X 3.4 ID TUBE ABS DWV 4 IN X 3.5 LONG EL 4 X 90DEG ABS TUBE ABS DWV 4 IN X LONG TUBE ABS DWV 4 IN X 6 LONG HHCS 1/4-20X5/8 GR5 NUT LOCK 1/4-20 PLT TEE, 6 IN TO 4 IN CLAMP WRM DRV #96SS ( ) HOSE 6.0 ID DUCTING X 1.2 FT CLAMP, MANIFOLD 4 INCH HHCS 5/16-18X2 1/2 GR5 WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT BRKT AIR TUBE U-BOLT 5/8-11 X 7 1/32 X 8 1/2 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT SENSOR CHAMBER ASY TUBE SQ 1 1/2X14GX76.0 U-BOLT 5/16-18 X 1 17/32X2 1/8 TUBE ABS DWV 4 IN X 7.1 LONG TUBE ABS DWV 4 IN X 20.8 LONG ORIFICE PLATE 4 OD X 3.0 ID TUBE RND 4 OD X.083WL X 4 L CLAMP WRM DRV #32SS ( ) HOSE 2 ID POLYP HELIX HOSE 1/4 RUBBER AIR HOSE 6.0 ID DUCTING X 10.7 FT HOSE 4.0 ID DUCTING X 10.8 FT CLAMP WRM DRV ( ) BRKT CENTER AIR MANIF Used with Single Row only Used with Twin Row Only Refer to Air Pressure Assembly For Breakdown 01/04/ P

40 Table of Contents Part Number Index Air Delivery 36" 38" 40" Single and 36" 38" 40" Twin Row Spacing P /04/18

41 Table of Contents Part Number Index Frame Air Delivery 36" 38" 40" Single and 36" 38" 40" Twin Row Spacing Ref. Part No. Part Description Comments Revision dwg C C C C C D D D D D C D D C C C C C D C C C D C C C D S C D D D D R C R C C C Image No. CAP PLUG DWV ABS 4 INCH SCREW HEX SLT 10-16X3/4 PLT TEE DWV ABS 4 X 4 X 4 ADAPT DUCTING 4 X DBBL 2 ADAPT DUCTING 4 X SING 2 TUBE ABS DWV 4 IN X 32.4 LONG ORIFICE PLATE 4 OD X 3.2 ID TUBE ABS DWV 4 IN X 24.8 LONG ORIFICE PLATE 4 OD X 3.4 ID TUBE ABS DWV 4 IN X 3.5 LONG EL 4 X 90DEG ABS TUBE ABS DWV 4 IN X LONG TUBE ABS DWV 4 IN X 6 LONG HHCS 1/4-20X5/8 GR5 NUT LOCK 1/4-20 PLT TEE, 6 IN TO 4 IN CLAMP WRM DRV #96SS ( ) HOSE 6.0 ID DUCTING X 1.2 FT CLAMP, MANIFOLD 4 INCH HHCS 5/16-18X2 1/2 GR5 WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT BRKT AIR TUBE U-BOLT 5/8-11 X 7 1/32 X 8 1/2 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT TUBE SQ 1.5 X 14GA X 58 SENSOR CHAMBER ASY U-BOLT 5/16-18 X 1 17/32X2 1/8 BRKT CENTER AIR MANIF TUBE SQ 1 1/2X14GX76.0 TUBE ABS DWV 4 IN X 7.1 LONG TUBE RND 4 OD X.083WL X 4 L HOSE 1/4 RUBBER AIR CLAMP WRM DRV #32SS ( ) HOSE 2 ID POLYP HELIX HOSE 6.0 ID DUCTING X 10.7 FT HOSE 4.0 ID DUCTING X 10.8 FT CLAMP WRM DRV ( ) Used on Twin Row Only Used on Single Row Only Refer to Air Pressure Assembly for breakdown 01/04/ P

42 Table of Contents Air Pressure Assembly Part Number Index P /04/18

43 Table of Contents Part Number Index Frame Air Pressure Assembly Ref. Part No. Part Description Comments Revision dwg C D S C C C C R D C C C D C C Image No. HHCS 5/16-18X2 1/2 GR5 CLAMP, MANIFOLD 4 INCH SENSOR CHAMBER ASY WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT AD 7/16MORB X 1/4HB BRASS NUT HEX JAM 7/16-20 PLT HOSE 1/4 RUBBER AIR DJ SENSOR, PRESSURE PSI HOSE RUBBER 5/32 ID X 3.0 IN DJ CONVERTER, VOLTAGE TO FREQ CLAMP SPRING BAND 1/2 OD HOSE NUT LOCK 1/4-20 PLT MAGNEHELIC PRES GAGE-0-6 INH2O MOUNT, AIR PRESSURE GAGE AD 1/8MNPT X 1/4HB BRASS HHCS 1/4-20X1/2 GR5 Includes item 6 01/04/ P

44 Table of Contents Hydraulic Steering (S/N B1026J-) Part Number Index P /04/18

45 Table of Contents Part Number Index Transport Hydraulic Steering (S/N B1026J-) Ref. Part No. Part Description Comments Revision dwg C D C C D C C C H C C C D V D H H H H C C H C C C C C C C C C C C C D C Image No. HFS X 1 1/8 PLTD PLT ADAPTOR STEERING SENSOR PIN COTTER 3/16 X 1 1/4 PLT NUT HEX SLOTTED 7/8-14 PLT END WHEEL SPACER HUB SEAL GREASE END WHEEL HUB BEARING CONE BEARING CUP HOUSING BEARING BRG CUP BEARING CONE SEAL X 2.0 X.438 CR20125 SHAFT STEERING SPINDLE HOUSING BEARING RETAINER TRUNION TIEROD TUBE WLDMNT 40 IN ROWS TIEROD TUBE WELDMT 30 IN ROWS TIEROD TUBE WELDMT 38 IN ROWS TIEROD TUBE WELDMT 36 IN ROWS SLEEVE TIEROD 7/8-18 RH/LH END TIEROD 7/8-18 LHX5/8 TAPER ARM STEERING WELDMENT CYL 3X8 TRUN W/SENSOR HHCS 5/8-11X1 3/4 GR5 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT HHCS 5/8-11X5 GR5 NUT HEX SLOTTED 5/8-11 PLT GR5 PIN CLEVIS 1 X 3 5/16 HRD PLT PIN COTTER 1/8 X 1 3/4 PLT WASHER FLAT #10 SAE PLT HHCS #10-24X1/2 GR5 CYL 3X8 TRUN SENSOR LIN 8" PWM KEY 1/2 X 1/2 X 2 SCREW SET SCKT HD 1/2-13 X 1/2 Includes items 1-13, 28 & 29 For 20" and 40" rows For 15" and 30" rows For 38" rows For 36" rows Refer to "Hydraulic Cylinder C (3 x 8 x 1.5 Rod)" for breakdown Refer to "Hydraulic Cylinder C (3 x 8 x 1.5 Rod)" for breakdown (Left Side) (Right Side) 01/04/ P

46 Table of Contents Hydraulic Steering (S/N B1027J+) Part Number Index P /04/18

47 Table of Contents Part Number Index Transport Hydraulic Steering (S/N B1027J+) Ref. Part No. Part Description Comments Revision dwg D C C C C C C C D D D D D D D D D C C Image No. PLT TRUNION MOUNT HHCS 5/8-11X2 1/2 GR5 CYL 3X15 TRUN W/SENSOR PIN CLVS.99X4.70 USBL PIN COTTER 1/8 X 1 3/4 PLT NUT HEX SLOTTED 7/8-14 PLT CYL 3X15 TRUN TIEROD END 1 1/8-12 LHX7/8 TPR NUT JAM 1 1/8-12 UNF LH TIEROD 67.5 X 2 THD LH/RH TIEROD 63.5 X 2 THD LH/RH TIEROD 71.5 X 2 THD LH/RH TIEROD X 2 THD LH/RH TIEROD 81.5 X 2 THD LH/RH TIEROD 99.5 X 2 THD TIEROD X 2 THD NUT JAM 1 1/8-12 UNF RH TIEROD END 1 1/8-12 RHX7/8 TPR WASHER LOCK SPRING 5/8 PLT Refer to "Hydraulic Cylinder C (3 x 15 x 1.5 Rod)" for breakdown Refer to "Hydraulic Cylinder C (3 x 15 x 1.5 Rod)" for breakdown Shown, used with single TR38. Used with single TR36. Used with single TR40. Used with single TR30 & dual TR40. Used with dual TR30. Used with dual TR36. Used with dual TR38. 01/04/ P

48 Table of Contents Part Number Index Transport Casters And Wheels (S/N B1026J-) P /04/18

49 Table of Contents Part Number Index Transport Transport Casters And Wheels (S/N B1026J-) Ref. Part No. Part Description Comments Revision dwg H D C C C H C C D C C D C H H C C C C C C C D D C C C C C C C L C C D C C C C C C C C C C C Image No. SEED BIN SUPPORT STRCTR ASM BRACKET 7X7 TUBESPRT 16.5LG HHCS 3/4-10X2 3/4 GR5 WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT SUPPORT CASTER WELDMENT HHCS 1/2-13X1 1/4 GR5 WASHER LOCK SPRING 1/2 PLT NTA CASTER RETAINER CAP STEEL BUSHING 3 1/4X3IDX3LONG GREASE ZERK STRAIGHT 1/4-28 BULK SEED CASTER VERT SHAFT PIVOT THRUST WASHER CSTR WLD HD F/40 TIRE W/O SENS CSTR WLD HD F/40 TIRE STEER RH NUT LOCK 3/4-10 PLT HHCS 3/4-10X6 1/2 GR5 HUB ASSEMBLY; 8-BOLT, 8000LBS HUB 8 - BOLT (Q75-8) GREASE ZERK STRAIGHT 1/8-27NPT NUT HEX 5/8-11 PLT WASHER LOCK SPRING 5/8 PLT STOP STEERING BOLT ON SPACER STOP STEERING BOLT ON HHCS 5/8-11X3 1/2 GR5 HHCS 3/4-10X5 GR5 SPINDLE 2.75 X OIL SEAL CR29968 BEARING CONE 387-AS BRG CUP 3.81D 382A HUB STUD 5/8-18X2 1/2 GR5 HUB 8/BOLT 8000# MACHINED BRG CUP 2.89ODX.58WD #LM BRG CONE 1.62IDX.78WD#LM HARDENED SPINDLE WASHER NUT HEX SLOTTED 1-14 PIN COTTER 7/32 X 2 GREASE CAP X.28 HUB/SPINDL 8 BLT F/SENSOR 8000 TIRE/WHL 16.5L-16.1 / 14 PLY TIRE/WHL 16.5L PLY BKSN TIRE 16.5L PLY IMPL WHEEL 16.1 X 14 8 BLT 6 PILOT WHEEL16.1X14 8BLT 6 PILOT BKSN VALVE STEM METAL TR-575 TUBLES NUT LUG 5/8-18 X 90 DEG PLT Includes items & 43 Includes items Used with Hydraulic Steering only Used with Hydraulic Steering only Used with Hydraulic Steering only Used with Hydraulic Steering only Used with Hydraulic Steering only Used with Hydraulic Steering only Includes items & 43 (S/N B1107J-) (S/N B1108J+) (S/N B1107J-) (S/N B1108J+) 01/04/ P

50 Table of Contents Part Number Index Transport Casters And Wheels (S/N B1027J+) P /04/18

51 Table of Contents Part Number Index Transport Transport Casters And Wheels (S/N B1027J+) Ref. Part No. Part Description Comments Revision dwg H D C C C D C C H H C C D C C C C D C H H C C C C C C C D C H C C C C C C C C C H C C C C C C C C C L C C D C C C Image No. SEED BIN SUPPORT STRCTR ASM BRACKET 7X7 TUBESPRT 16.5LG HHCS 3/4-10X2 3/4 GR5 GREASE ZERK STRAIGHT 1/4-28 HHCS 1/2-13X1 1/4 GR5 CAP 5" SNAP RING EXT 4" BUSHING 4.5 X 4.0 X 3 CONNEX SUPPORT CASTER WELDMENT LFT SUPPORT CASTER WELDMENT RHT WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT STOP 1.5 X 6 ADJ NUT HEX JAM 1-8 PLT HHCS 1-8X2 GR5 PIN CLEVIS 3/4 X 2 1/2 PLT PIN COTTER 1/8 X 1 3/4 PLT WASHER THRUST 5.0X4.0X.132 STEEL BUSHING 3 1/4X3IDX3LONG TUBE STEERING PIVOT WLDMT LFT TUBE STEERING PIVOT WELD RH RING OD X.095 WL X.043 BUSHING SPINDLE 1 1/2X1 1/4X1 GREASE ZERK STRAIGHT 1/8-27NPT HUB STUD 5/8-18X2 1/2 GR5 NUT LUG 5/8-18 X 90 DEG PLT WHEEL 16.1 X 14 8 BLT 6 PILOT WHEEL16.1X14 8BLT 6 PILOT BKSN SHAFT CASTER 3.0 X PIVOT THRUST WASHER CSTR WLD HD F/40 TIRE W/O LOCK NUT HEX 3/4-10 PLT NYLOCK HHCS 3/4-10X6 1/2 GR5 NUT HEX 1/2-13 PLT HHCS 1/2-13X2 GR5 VALVE STEM METAL TR-575 TUBLES TIRE 16.5L PLY IMPL TIRE/WHL 16.5L-16.1 / 14 PLY TIRE/WHL 16.5L PLY BKSN WASHER LOCK SPRING 1/2 PLT PIN WLDMT 1 1/4 X 6 1/2 NR HUB/SPINDL 8 BLT F/SENSOR 8000 HUB ASSEMBLY; 8-BOLT, 8000LBS HUB 8 - BOLT (Q75-8) HHCS 3/4-10X5 GR5 NUT HEX JAM 1/2-13 PLT SPINDLE 2.75 X OIL SEAL CR29968 BEARING CONE 387-AS BRG CUP 3.81D 382A HUB 8/BOLT 8000# MACHINED BRG CUP 2.89ODX.58WD #LM BRG CONE 1.62IDX.78WD#LM HARDENED SPINDLE WASHER NUT HEX SLOTTED 1-14 PIN COTTER 7/32 X 2 GREASE CAP X.28 Shown Shown (S/N B1107J-) (S/N B1108J+) (S/N B1107J-) (S/N B1108J+) 01/04/ P

52 Table of Contents Part Number Index Transport Casters And Wheels (S/N B1027J+) (continued) Ref Part No H H H H H H C C C C C C C D C C D C C C C C C C Part Description 3PYP DUAL STEER CASTER SUPPORT CASTER WELDMENT LFT SUPPORT CASTER WELDMENT RHT SUPPORT CASTER WELDMENT LH SUPPORT CASTER WELDMENT RH DUAL CASTER STEER WELDMENT HHCS 3/4-10X5 GR5 HUB & SPINDLE ASY 8 BOLT 5790# NUT HEX 3/4-10 PLT NYLOCK SPINDLE SGL 2.73X BOLT HUB SEAL BRG CONE 2.00IDX1.18WD #3780 BRG CUP 3.670DX.93WD # BOLT WHEEL HUB MACH. BRG CUP 3.00ODX.75WD #2720 BRG CONE 1.31IDX1.01WD #2790 7/8 SPINDLE WASHER, HARDENED NUT HEX SLOTTED 7/8-14 PLT PIN COTTER 3/16 X 1 1/4 PLT HUB CAP HUB STUD 5/8-18X2 1/2 GR5 PLT. NUT HEX FLANGE 5/8-18 UNF 2 PC BUSHING CYL 1 1/4 X 1 X 1 WASHER FLAT 3/4 SAE PLT Comments Used with 15" & 30" spacing. Used with 30" spacing. Used with 30" spacing. Used with 36", 38" & 40" spacing. Used with 36", 38" & 40" spacing. Used with 36", 38" & 40" spacing. Used with Dual Caster Wheels. Includes items 23, 24, Revision P /04/18

53 Table of Contents Part Number Index Transport Transport Casters And Wheels (S/N B1027J+) (continued) This Page Intentionally Left Blank 01/04/ P

54 Contact Drive Table of Contents Part Number Index P /04/18

55 Contact Drive Table of Contents Part Number Index Drive Ref. Part No. Part Description Comments Revision dwg C C C D C C C C C C D S D C D C C C C C D C C D C D C C C D C D C D D C C D C C C C C C C C D C D D D S H C C H C Image No. DRIVESHAFT 3PYP PLANTER PIN ROLL 1/4 X 2 LG PL PIN ROLL 1/4 X 1 1/2 LG PLT SHAFT 7/8 HEX X 34.5 LG FLG TP LK 5/16-18ZNYCR FLANGETTE 52 3-BOLT PLT BRG INS 7/8HEXX2.04OD SPH RHSNB 5/16-18X1 GR5 HSHCS M8X1.25X30 GR8.8 PLT SPKT 50A25 CLUTCH METRIC BORE CLUTCH SPROCKET SPACER LOCK COLLAR, 7/8 HEX W/ SET SC COLLAR LOCK 7/8 HEX SCREW SET 5/16-18 SKT KP X 3/8 BUSHING 1 1/8 ODX7/8 HEX BORE KEY 1/4 X 3/16 X 3.80 OGURA CLUTCH HHCS 1/2-13X4 1/2 GR5 SPTHD WASHER FLAT 1/2 USS HARD PLT IDLER SPOOL # X1.01X.31 TUBE RND 1 OD X 7/32W X 3.31 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT CHAIN RL # PITCHES SPKT 50C30 X 7/8 HEX BORE SHAFT 7/8 HEX X 227 LONG CLAMP WRM DRV#28 SS( ) DRIVE SHAFT BELLOWS - LONG CLAMP WRM DRV #20SS ( ) SHAFT 7/8 HEX X 90.0 LG WASHER MACH 1.50 X 1.00 X 18GA CHAIN RL # PITCHES HSHCS 5/16-18X3/4 GR8 BLK SPKT 50A22 X 1 3/8 BORE CHAIN RL #50 70 PITCHES CLUTCH SLIP 175NM 7/8 HEX BORE HHCS 1/2-13X3 1/4 GR5 TUBE RND 1 OD X 7/32W X 2.13 HHCS 1/2-13X4 1/2 GR5 HHCS 1/4-20X5 GR5 PLT NUT-HEX 1/4-20 PLT WASHER FLAT 1/4 SAE PLT WASHER LOCK SPRING 1/4 PLT WASHER MACH 1 3/4 X 1 X 18 GA SPKT 50C28 X 7/8 HEX BORE SPKT 50C23 X 7/8 HEX BORE CHAIN RL #50 82 PITCHES HHCS 1/2-13X5 1/2 GR5 TUBE RND 1 X 7/32 WL X 4 SHAFT 7/8 HEX SHAFT 7/8 HEX, LONG PLTD SPLIT SPACER 1 ID X 1.25 THICK SPKT 50C18 X 7/8 HEX BORE SPKT 50C36 X 7/8 HEX BORE U-BOLT 5/8 X 7 1/32 X 8 1/2 TRANSMISSION WELDMENT WASHER FLAT 5/8 SAE PLT 01/04/ P

56 Table of Contents Contact Drive (continued) Part Number Index Ref Part No C C D C Part Description WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT M6X1X3.5MM THD ZERK EC YOKE ASSY EC CROSS ASSEMBLY (U JOINT) EC OUTER TUBE YOKE EC INNER TUBE YOKE CLUTCH OIL SHIELD BUTTON PLUG 7/8 ROUND HOLE Comments Revision P /04/18

57 Table of Contents Part Number Index Drive Contact Drive (continued) This Page Intentionally Left Blank 01/04/ P

58 Table of Contents Contact Drive Gauge Wheel Part Number Index P /04/18

59 Table of Contents Part Number Index Drive Contact Drive Gauge Wheel Ref. Part No. Part Description Comments Revision dwg S D D D D S D H H H H H H H H H D D C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C V D C H Image No. 3 BOLT PIVOT BEARING ASSY TUBE RND 1 OD X 7/32W X 1.56 TUBE RND 1 OD X 7/32W X 3.31 SHAFT 7/8 HEX SPKT 50A BORE LONG LINK SPRING ADJUSTER SLEEVE SPRING LINK MOUNT PIN 1 X 4 1/2 NONROTATE SPKT 50C34 X 7/8 HEX BORE SPKT 50C18 X 7/8 HEX BORE SPKT 50C38 X 7/8 HEX BORE GUARD CHAIN GROULD DRIVE GAUGE WHL GR DR MNT WLMT SPINDLE GW WELDMENT YOKE GA WHL WLMT GRND DRV LEFT YOKE GA WHL WLMT GRND DRV RH SPACER GAUGE WHL 1 3/16 SHAFT 7/8 HEX 16 3/8 GREASE ZERK STRAIGHT 1/4-28 HHCS 3/8-16X1 GR5 HHCS 3/4-10X2 1/4 GR5 HHCS 1/2-13X1 3/4 GR5 HHCS 3/8-16X2 1/2 GR5 HHCS 1/2-13X4 3/4 GR5 HHCS 1/2-13X2 3/4 GR5 RHSNB 5/16-18X1 GR5 HHCS 3/4-10X1 1/2 GR5 NYL NUT HEX 1/2-13 PLT NUT HEX 3/4-10 PLT NUT HEX JAM 1/2-13 PLT NUT HEX FLG TOP LK 5/16-18 YLW NUT HEX JAM 1 1/2-12 PLT WASHER FLAT 3/8 USS PLT WASHER LOCK SPRING 3/8 PLT WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1/2 USS PLT WASHER LOCK SPRING 3/4 PLT WASHER MACH 1.50 X 1.00 X 18GA WASHER FLAT 1/2 USS HARD PLT PIN ROLL 1/4 X 1 1/2 LG PLT PIN LINCH 3/16 X 1 9/16 LONG U-BOLT 3/4-10 X 7 1/32 X 9 3/4 SPKT 50C15 X 7/8 HEX BORE SPKT 50C19 X 7/8 HEX BORE SPKT 50C20 X 7/8 HEX BORE SPKT 50C28 X 7/8 HEX BORE SPKT 50C30 X 7/8 HEX BORE TIRE/WHL LUG LEFT HUB ASSY 6BOLT 6"BC 4.62PILOT IDLER SPOOL # X1.01X1.31 BRG.7/8HEX BR 52MM SPHRICAL OD FLANGETTE 52 3-BOLT PLT SNAP RING INT 2.05 OD BEARING.880 HEX BORE 205DD 3 BOLT PIVOT CAST W/BRG SEAT BUSHING CYL 1 1/4 X 1 X 1 LONG ADJUSTMENT ROD WLMT 01/04/ P

60 Table of Contents Part Number Index Contact Drive Gauge Wheel (continued) Ref Part No D D C D C C C C D C C C C D D C C C C C C Part Description LINK, ADJUSTMENT BLOCK MOUNTING NUT ACME THD 1-5 WASHER, HEAVY FLAT WHEEL 15 DIA X 6 WIDE X 6 BOLT TIRE PLY LUG VALVE STEM TR415X.625X1 1/4 LG BRG CONE TIMKEN 13600LA90028 SPRING, COMP. 2.69X3.25X.375W HHCS 1/4-20X1 1/2 GR5 WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT BOLT WHEEL 9/16-18X1 1/8 90-D CHAIN RL # PITCHES CHAIN RL # PITCHES SPKT 50C17 X 7/8 HEX BORE SPKT 50C23 X 7/8 HEX BORE SPKT 50C24 X 7/8 HEX BORE SPKT 50C25 X 7/8 HEX BORE SPKT 50C26 X 7/8 HEX BORE SPKT 50C27 X 7/8 HEX BORE Comments Revision P /04/18

61 Table of Contents Part Number Index Drive Contact Drive Gauge Wheel (continued) This Page Intentionally Left Blank 01/04/ P

62 Hydraulic Drive Table of Contents Part Number Index P /04/18

63 Hydraulic Drive Table of Contents Part Number Index Drive Ref. Part No. Part Description Comments Revision dwg D C C C S C C C C D C C C C C C H D C C C C C D H D C C D C C C C D D C C C C N/A C C C D C D D D D D S Image No. SHAFT 7/8 HEX, LONG PLTD U-BOLT 5/8 X 7 1/32 X 8 1/2 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT LOCK COLLAR, 7/8 HEX W/ SET SC SPKT 50C30 X 7/8 HEX BORE NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1/2 USS HARD PLT TUBE RND 1 OD X 7/32W X 3.31 IDLER SPOOL # X1.01X.31 HHCS 1/2-13X4 1/2 GR5 SPTHD RHSNB 5/16-18X1 GR5 FLANGETTE 52 3-BOLT PLT BRG INS 7/8HEXX2.04OD SPH FLG TP LK 5/16-18ZNYCR BRG/SEED TUBE SUPPORT WLMT SHAFT 7/8 HEX 38 LG PIN ROLL 1/4 X 1 1/2 LG PLT DRIVESHAFT 3PYP PLANTER CLAMP WRM DRV #20SS ( ) DRIVE SHAFT BELLOWS - LONG CLAMP WRM DRV#28 SS( ) SHAFT 7/8 HEX, 113 LG PLT BRKT ROW UNIT DRV SFT WLDMNT SHAFT 7/8 HEX LG PIN ROLL 1/4 X 2 LG PL SCREW SET 5/16-18 SKT KP X 3/8 COLLAR LOCK 7/8 HEX NUT HEX 5/16-18 PLT WASHER FLAT 5/16 SAE PLT HSHCS M8X1.25X30 GR8.8 PLT SPKT 50A25 CLUTCH METRIC BORE CLUTCH SPROCKET SPACER BUSHING 1 1/8 ODX7/8 HEX BORE KEY 1/4 X 3/16 X 3.80 OGURA CLUTCH HHCS 5/16-18X6 GR5 SPKT 50B17 X 1 BORE W/KW, 2 SS HHCS 5/8-11X2 1/2 GR5 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT SHAFT 7/8 HEX 26 1/2 LG SPKT 50C23 X 7/8 HEX BORE CHAIN RL #50 63 PITCHES CHAIN RL #50 78 PITCHES CHAIN RL # PITCHES CHAIN RL # PITCHES AD 7/8M HEX X 1 1/4 RD DJ AR SENSOR MOUNTING HARDWARE APPLICATION RATE SENSOR M6X1X3.5MM THD ZERK EC YOKE ASSY EC CROSS ASSY (LONG LIFE) EC OUTER TUBE YOKE Refer to page "Hydraulic Drive Components" for breakdown 01/04/ P

64 Table of Contents Hydraulic Drive (continued) Part Number Index Ref Part No D C Part Description EC INNER TUBE YOKE CLUTCH OIL SHIELD BUTTON PLUG 7/8 ROUND HOLE Comments Revision P /04/18

65 Table of Contents Part Number Index Drive Hydraulic Drive (continued) This Page Intentionally Left Blank 01/04/ P

66 Table of Contents Hydraulic Drive Components Part Number Index P /04/18

67 Table of Contents Part Number Index Drive Hydraulic Drive Components Ref. Part No. Part Description Comments Revision dwg C C VER C VER C C C VER C C C C VER C VER VER VER VER H H C C C C C VER D C C Image No. FILTER ASM 6000PSI 6MICRON FILTER ELEMENT 6MI PALL VERIS HYD HS 8M3K-8FJX90S-8FJX AD 3/4MJIC 1 1/16MORB VERIS BLT FLG SER8.8M8-1.25X FLG TP LK 5/16-18ZNYCR NUT HEX WHIZ 1/2-13 HFSS 1/2-13X1 1/2 GR5 VERIS FTG HYD 8MB-8MJ90 AD 3/4MJIC 7/8MORB VALVE INLINE CHECK W/ ORIFICE AD 3/4FORB 7/8MORB MOTOR 8.8 CU IN FC6 MNT KEYED VERIS HYD LINE STL.5 OD X.049 HH1/2R /4FJIC 3/4MORB VERIS SOLENOID CABLE VERIS VLV BODY SAE-12-2X SAE-8 VERIS COIL 12V WATERMAN CARTR VERIS PROPORTIONAL CARTR 14GPM MOTOR MOUNT 40' WELDMENT CONTROLLER MOUNT 40' WELDMENT HFSS 5/16-18 X 3/4 GR5 RHSNB 5/16-18X1 GR5 NUT HEX 5/16-18 PLT EL 3/4FJIC 3/4MJIC SPKT 50B17 X 1 BORE W/KW, 2 SS VERIS KEY WOODRUFF WALKBOARD LADDER PIVOT BUSHING AD 3/4MORB 3/4MJIC CP 3/4FORB MALE QD POPPET TYPE 01/04/ P

68 Table of Contents Non Drive Contact Gauge Wheel Part Number Index P /04/18

69 Table of Contents Part Number Index Drive Non Drive Contact Gauge Wheel Ref. Part No. Part Description Comments Revision dwg C H C C D C C C D C S H H C H C C C C C C C H C D D D D H C C C C C C Image No. U-BOLT 3/4-10 X 7 X 8 1/2 BRACKET GAUGE WHL MNT WLDMT WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT 3 BOLT PIVOT CAST MACHINED HHCS 1/2-13X1 3/4 GR5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT SLEEVE SPRING LINK MOUNT HHCS 3/4-10X1 1/2 GR5 NYL PLT LONG LINK SPRING ADJUSTER YOKE GA WHL WLMT GRND DRV LEFT YOKE GA WHL WLMT GRND DRV RH HHCS 1/4-20X1 1/2 GR5 PIN 1 X 4 1/2 NONROTATE WASHER LOCK SPRING 1/4 PLT NUT-HEX 1/4-20 PLT HHCS 3/4-10X2 1/4 GR5 NUT HEX JAM 1 1/2-12 PLT BRG CONE 1.50ID 13600LA90028 HUB ASSY 6BOLT 6'"BC 4.62PILOT BOLT WHEEL 9/16-18X1 1/8 90-D SPINDLE GW WELDMENT NUT ACME THD 1-5 WASHER, HEAVY FLAT BLOCK MOUNTING SPRING, COMP. 2.69X3.25X.375W LINK, ADJUSTMENT LONG ADJUSTMENT ROD WLMT GREASE ZERK STRAIGHT 1/4-28 BUSHING CYL 1 1/4 X 1 X 1 VALVE STEM TR415X.625X1 1/4 LG WHEEL 15 DIA X 6 WIDE X 6 BOLT RPBY C TIRE/WHL 9.5LX15 6IN 6BOLT Left Hand (Shown) Right Hand 01/04/ P

70 Table of Contents Transmission Drive Part Number Index P /04/18

71 Table of Contents Part Number Index Drive Transmission Drive Ref. Part No. Part Description Comments Revision dwg D D S D D S H H D D D C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C D D D C C D Image No. TUBE RND 1 OD X 7/32W X 2.13 TUBE RND 1 OD X 7/32W X 3.31 SPLIT SPACER 1 ID X 1.25 THICK CLUTCH SPROCKET SPACER BUSHING 1 1/8 ODX7/8 HEX BORE LOCK COLLAR, 7/8 HEX W/ SET SC SPKT 50C18 X 7/8 HEX BORE TRANSMISSION WELDMENT SPKT 50A22 X 1 3/8 BORE SHAFT 7/8 HEX TUBE RND 1 OD X 7/32WL X 2.25 BUTTON PLUG 7/8 ROUND HOLE HHCS 1/4-20X5 GR5 PLT HHCS 1/2-13X3 1/4 GR5 RHSNB 5/16-18X1 GR5 HHCS 1/2-13X4 1/2 GR5 HSHCS 5/16-18X3/4 GR8 BLK HSHCS M8X1.25X30 GR8.8 PLT NUT-HEX 1/4-20 PLT NUT HEX 1/2-13 PLT NUT HEX 5/8-11 PLT FLG TP LK 5/16-18ZNYCR WASHER LOCK SPRING 1/4 PLT WASHER FLAT 1/4 SAE PLT WASHER LOCK SPRING 1/2 PLT WASHER FLAT 5/8 SAE PLT WASHER LOCK SPRING 5/8 PLT WASHER MACH 1.50 X 1.00 X 18GA PIN LINCH 3/16 X 1 9/16 LONG WASHER FLAT 1/2 USS HARD PLT PIN ROLL 1/4 X 1 1/2 LG PLT U-BOLT 5/8 X 7 1/32 X 8 1/2 SPKT 50C23 X 7/8 HEX BORE SPKT 50C28 X 7/8 HEX BORE SPKT 50C36 X 7/8 HEX BORE SPKT 50A25 CLUTCH METRIC BORE IDLER SPOOL # X1.01X.31 BRG 7/8HEXX2.05OD SPH FLANGETTE 52 3-BOLT PLT OGURA CLUTCH CLUTCH SLIP 175NM 7/8 HEX BORE KEY 1/4 X 3/16 X 3.80 CHAIN RL #50 82 PITCHES CHAIN RL #50 70 PITCHES CHAIN RL # PITCHES HHCS M8X1.25X14 GR8.8 NUT HEX NYLOCK M8X1.25 PLT CLUTCH OIL SHIELD 01/04/ P

72 Table of Contents Tru-Count Clutch Assembly Part Number Index P /04/18

73 Table of Contents Part Number Index Drive Tru-Count Clutch Assembly Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C D S C R C C D D C C C C C D C C C C D H H H C C D C D D D C C H C C D C C D C D C D D C C C S Image No. TRU-COUNT VALVE ASM EXTENSION HARNESS 40' 6 PIN WP EXTENSION HARNESS 25' 6 PIN WP DJIA OUTPUT HARN 8-CH TRU-COUN CP 1/4 PUSH LOK POLY HHCS 1/4-20X1 1/4 GR5 WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT U-BOLT 3/8-16 X 7 1/32 X 7 7/8 NUT FLANGE LOCK 3/8-16 PLT TRU-COUNT VALVE MODULE BRACKET PLNTR CNTRL OUTPUT MODULE(POM) TE POLY 1/4 PUSH LOCK TUBE NYLON 1/4OD X 062WL SPKT 41C12 W/SS SPCL PLT PEER 7/8 HEX BRG AND MNT OFFSET BRG BRACKET OFFSET BRG BRACKET LH NUT HEX 3/8-16 PLT WASHER LOCK SPRING 3/8 PLT HHCS 3/8-16X1 GR5 TRUE COUNT RH AIR CLUTCH HHCS 1/4-20X2 1/2 GR5 TRU-COUNT HUB SNAP RING EXT BASIC 1 3/16 RUBBER FLG BUSH.189ID.36OD WASHER FLAT #10 SAE PLT HSHCS #10-32X1 KEY.250X.125X1.00 RECT TRU-COUNT 15 IN SPKT TUBE TRU-COUNT 15 IN LH SPKT TUBE TRU-COUNT TR SPKT TUBE REP SPKT 41B12 SPCL FLG BSHG 30MMX32MMX12MM ADAPTER 7/8 HEX 1 1/4 RND BORE HHCS 3/8-16X1 3/4 GR5 SPACER PLATE FRT BEARING SPACER SHIM FRT BRG TRU COUNT TRU-COUNT AIR TANK MOUNT PLATE HHCS 3/8-16X3/4 GR5 TRU-COUNT COMPRESSOR ASSEMBLY TRU-COUNT TR REVERSE SPKT TUBE TRU-COUNT LH AIR CLUTCH HHCS 1/4-20X1 GR5 SUPT BRACKET HEX BRG HHCS 3/8-16X1 1/2 GR5 WASHER FLAT 3/8 SAE PLT STEP BUSHING FOR OPENER BRG HHCS 1/4-20X1 1/2 GR5 ADAPTER TC CLUTCH 41A12 SPKT HSHCS #10-32X5/8 TRU-COUNT SPKT RETAINER RING SPKT 41A12 3HOLE TC WASHER LOCK INTERNAL #10 SS HSHCS #10-32X7/8 TRU-COUNT AIR TANK ASM LOCK COLLAR, 7/8 HEX W/ SET SC RH Bracket (Shown) LH Bracket RH clutch NO 3PYP YP40 & YP24 ALL Used on single row assembly Used on single row assembly Used on single row assembly Used on single row assembly Used on single row assembly Used on single row assembly Used on single row assembly 01/04/ P

74 Table of Contents Part Number Index Tru-Count Clutch Assembly (continued) Ref Part No C C C C C C C C C C C C C D C K C C C Part Description HHCS 1/4-20X3/4 GR5 WASHER FLAT 1/4 SAE PLT WASHER LOCK # TRU CNT FIT.1/4MNPTX1/ TRU CNT HOSE FOR COMPRES TRU CNT MAN CMP 350/450C TRU COUNT MINI BALL VALV S (10PK)TRU CNT TB FIT TRU CNT SWTCH PSI TRU CNT BRSS TNK DRN 1/ TRU CNT VALV ENCLOSUR TRU CNT STRN RELIEF LIQ TRU COUNT AIR VALVE SING SPACER EXTENDED SNGL CLUTCH TC HHCS 1/4-20X2 GR5 TRU-COUNT SHORT ROW SINGLE ASM TRIMBLE 11' EXT. HARN TRIMBLE BATT LEAD CAB TRIMBLE 8' EXT. HARN Comments Only used on YP30. Includes items: 7, 20, 23, 26, 47-49, 56, & Revision P /04/18

75 Table of Contents Part Number Index Drive Tru-Count Clutch Assembly (continued) This Page Intentionally Left Blank 01/04/ P

76 Table of Contents 25 Series Air Meter Assembly Part Number Index P /04/18

77 Table of Contents Part Number Index Meter 25 Series Air Meter Assembly Ref. Part No. Part Description Comments Revision dwg H V H S D C D D C C C C C C C C C C C C C C C D C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C Image No. AIR METER MOUNT 25 SER SHAFT AND DISK SEAT ASSY IDLER WELDM COVER ASSY, AIR METER HOUSING, MACHINED, AIR METER IDLER PIVOT 1.73 LONG PLATE, SHUTTER HANDLE, SHUTTER UPPER FERT HOSE CLAMP RATCHET WOODRUFF KEY #606 SNAP RING EXT 1 HEAVY HFS X 3/4 PLT HHCS 3/8-16X3/4 GR5 HHCS 1/4-20X5/8 GR5 HHCS 5/16-18X1 GR5 HHCS 5/16-18X5/8 NUT HEX NYLOCK PLT NUT HEX JAM NYLOCK 5/8-18 PLT WASHER FLAT 1/4 SAE PLT WASHER FLAT 5/16 USS PLT WASHER LOCK SPRING 3/8 PLT GASKET, OVAL, SEED IN WASHER FENDER 5/16 X 1 1/2 WASHER FLAT 5/8 14GA KEYHOLE WASHER WAVE SPRG 1.31ID 1.63OD WASHER WAVE SPRG 0.65ID 0.79OD SPRING COMP 1.46ODX1.5X.112W SPRING EXT. 1.0ODX5.OLX.095MW SPRING COMP 0.72OD.095W 1.25L SPKT 41B19 X 5/8 BORE W/KYWAY IDLER SPOOL 2.38X1.01X0.90 AIR MTR BRUSH HOLDER SNAP AIR MTR SCREEN CONE HALF AIR MTR AIR INLET ELBOW AIR MTR DISK CLAMP BUSHING.63 ID X.75 OD X.75 L AIR MTR SEED INLET ELBOW BRUSH, SEED DROP BRUSH, 4 TUFTED AM BRUSH HOLDER CLAMP HOSE NYLON GF MATRIX 192 PLUG, FLUSH HEAD POLYETH 7/16 BRG 0.625ID X1.375OD X0.43 SCREEN 20M 1.57 DIAX3.25 LONG SHAFT, SHUTTER, 3/8 SQ BRUSH, STRIP, LONG BRUSH, STRIP, SHORT GASKET, OVAL, AIR IN EDGE SEAL 3/32 X 7/16X.24.25L AIR MTR RAIN COVER LATCH, FLEXIBLE SNAP SNAP RING EXT 5/8.050 T DISK AIR METER BLANK DISK CORN RND LARGE 24 CELL DISK CORN RND SMALL 24 CELL DISK CORN RND LARGE 40 CELL DISK CORN RND SMALL 40 CELL Includes items Must have Rev.A to work with item 45. Update Meter to S Updated Meter to A Only works with item 7 with Rev.A Shown 01/04/ P

78 Table of Contents Part Number Index 25 Series Air Meter Assembly (continued) Ref Part No C C C C C D C C C C C C C C D D D C C C C C C C C C S A C C C C A C C C C M A A Part Description DISK SOYB 84 CELL DISK MILO 130 CELL DISK CORN FLAT LARGE 24 CELL DISK CORN FLAT LARGE 40 CELL DISK MILO 65 CELL DISK SOYB 168 CELL DISK VOLUMETRIC NO CELL DISK CORN RND MED 24 CELL DISK CORN RND MED 40 CELL DISK CANOLA 150 CELL DISK CANOLA 250 CELL HHCS 5/16-18X3/4 GR5 NUT HEX WHIZ 5/16-18 PLT NYLON HOSE CLAMP 1 7/8-2 1/8 FERTILIZER TINE SPACER BRACKET, CLEANOUT FUNNEL BRACKET, CLEANOUT FUNNEL LATCH HHCS 1/2-13X4 GR5 HFS 3/8-16X1 GR5 NUT HEX NYLOCK 1/2-13 NUT FLANGE LOCK 3/8-16 PLT WASHER FLAT 1/2 SAE PLT SPRING EXT.438ODX1.5X.046W WASHER RBR 1 3/8ODX9/16IDX1/2L HANDLE GRIP.187 X.750 X 3 LG AIR METER CLEAN OUT FUNNEL CLEANOUT FUNNEL & STORAGE BKT AIR METER SHUTTER AND SQ SHAFT AD 7/16MORB X 1/4HB BRASS NUT HEX JAM 7/16-20 PLT NYLON HOSE CLAMP 1 7/8-2 1/8 CLAMP WRM DRV #32SS ( ) VOLUMETRIC METER GRAIN SHIELD LG AIR MTR SCREEN CONE HALF AIR METER SD TB SCRN CONIC FIELD FLARED SEED TUBE FIELD CUT TEMPLATE MANUAL FIELD UPDT KIT, AIR-PRO AIR-PRO FIELD UPDT COMPONENTS AIR-PRO FIELD UPDATE TOOLS Comments Used as a Brace Includes items Includes Rev.A shutter plate. Will take place of item 42 Will take place of item 42 Used as a Brace Used with Air Hose Option used with small seeds Includes items 41 & Includes items 80 & 81 Revision P /04/18

79 Table of Contents Part Number Index Meter 25 Series Air Meter Assembly (continued) This Page Intentionally Left Blank 01/04/ P

80 Table of Contents 25 Series Air Meter Assembly Part Number Index P /04/18

81 Table of Contents Part Number Index Meter 25 Series Air Meter Assembly Ref. Part No. Part Description Comments Revision * **. dwg H V H S D D C D D C C C C C C C C C C C C C C C D C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C Image No. AIR METER MOUNT 25 SER SHAFT AND DISK SEAT ASSY IDLER WELDM COVER ASSY, AIR METER HOUSING, MACHINED, AIR METER HOUSING MACHINE AIR MTR COATED IDLER PIVOT 1.73 LONG PLATE, SHUTTER HANDLE, SHUTTER UPPER FERT HOSE CLAMP RATCHET WOODRUFF KEY #606 SNAP RING EXT 1 HEAVY HFS X 3/4 PLT HHCS 3/8-16X3/4 GR5 HHCS 1/4-20X5/8 GR5 HHCS 5/16-18X1 GR5 HHCS 5/16-18X5/8 NUT HEX NYLOCK PLT NUT HEX JAM NYLOCK 5/8-18 PLT WASHER FLAT 1/4 SAE PLT WASHER FLAT 5/16 USS PLT WASHER LOCK SPRING 3/8 PLT GASKET, OVAL, SEED IN WASHER FENDER 5/16 X 1 1/2 WASHER FLAT 5/8 14GA KEYHOLE WASHER WAVE SPRG 1.31ID 1.63OD WASHER WAVE SPRG 0.65ID 0.79OD SPRING COMP 1.46ODX1.5X.112W SPRING EXT. 1.0ODX5.OLX.095MW SPRING COMP 0.72OD.095W 1.25L SPKT 41B19 X 5/8 BORE W/KYWAY IDLER SPOOL 2.38X1.01X0.90 AIR MTR BRUSH HOLDER SNAP LG AIR MTR SCREEN CONE HALF AIR MTR AIR INLET ELBOW AIR MTR DISK CLAMP BUSHING.63 ID X.75 OD X.75 L AIR METER SEED INLET ELBOW BRUSH, SEED DROP BRUSH, 4 TUFTED AM BRUSH HOLDER CLAMP HOSE NYLON GF MATRIX 192 PLUG, FLUSH HEAD POLYETH 7/16 BRG 0.625ID X1.375OD X0.43 AIR METER SD TB SCRN CONIC SHAFT, SHUTTER, 3/8 SQ BRUSH, STRIP, LONG BRUSH, STRIP, SHORT GASKET, OVAL, AIR IN EDGE SEAL 3/32 X 7/16X.24.25L AIR MTR RAIN COVER LATCH, FLEXIBLE SNAP SNAP RING EXT 5/8.050 T DISK AIR METER BLANK DISK CORN RND LARGE 24 CELL DISK CORN RND SMALL 24 CELL Note: Used with all YP's except small 4, 6 & 8 row planters Includes items Used with Rice Must have Rev.A to work with item 45. Only works with item 7 with Rev.A Shown 01/04/ P

82 Table of Contents Part Number Index 25 Series Air Meter Assembly (continued) Ref. **. **. **. **. **. **. **. **. **. **. ** Part No C C C C C C C D C C C C C C C C D D D C C C C C C C C C S A C A C C Part Description DISK CORN RND LARGE 40 CELL DISK CORN RND SMALL 40 CELL DISK SOYB 84 CELL DISK MILO 130 CELL DISK CORN FLAT LARGE 24 CELL DISK CORN FLAT LARGE 40 CELL DISK MILO 65 CELL DISK SOYB 168 CELL DISK VOLUMETRIC NO CELL DISK CORN RND MED 24 CELL DISK CORN RND MED 40 CELL DISK CANOLA 250 CELL DISK HILL DROP COTTON 12 CELL HHCS 5/16-18X3/4 GR5 NUT HEX WHIZ 5/16-18 PLT NYLON HOSE CLAMP 2 1/8-2 3/8 FERTILIZER TINE SPACER BRACKET, CLEANOUT FUNNEL BRACKET, CLEANOUT FUNNEL LATCH HHCS 1/2-13X4 GR5 HFS 3/8-16X1 GR5 NUT HEX NYLOCK 1/2-13 NUT FLANGE LOCK 3/8-16 PLT WASHER FLAT 1/2 SAE PLT SPRING EXT.438ODX1.5X.046W WASHER RBR 1 3/8ODX9/16IDX1/2L HANDLE GRIP.187 X.750 X 3 LG AIR METER CLEAN OUT FUNNEL CLEANOUT FUNNEL & STORAGE BKT AIR METER SHUTTER AND SQ SHAFT EL 45 7/16MORB X 1/4HB VOLUMETRIC METER GRAIN SHIELD NYLON HOSE CLAMP 1 7/8-2 1/8 CLAMP WRM DRV #32SS ( ) Comments Used as a Brace Includes items Includes Rev.A shutter plate. Option used with small seeds Used as a Brace Used with Air Hose Revision P /04/18

83 Table of Contents Part Number Index Meter 25 Series Air Meter Assembly (continued) This Page Intentionally Left Blank 01/04/ P

84 Table of Contents Air Meter Timing Tool Part Number Index P /04/18

85 Table of Contents Part Number Index Meter Air Meter Timing Tool Ref. Part No. Part Description Comments Revision dwg C C H C C Image No. PIN LINCH 3/16 X 1 9/16 LONG TIMING TOOL, 19 TOOTH TIMING TOOL HOLDER NUT FLANGE LOCK 3/8-16 PLT HFS 3/8-16X1 GR5 01/04/ P

86 Table of Contents Opener Arms & Mounts Part Number Index P /04/18

87 Table of Contents Part Number Index Opener Opener Arms & Mounts Ref. Part No. Part Description Comments Revision dwg H H C C H C C C D H H C D C D C C C C C C C H C D H D C D D D C C C C D C D Image No. 25P MIDDLE OPENER MOUNT WELDMT 25P REAR OPENER MOUNT WELDMT U-BOLT 5/8-11 X 7 1/32 X 8 1/2 NUT HEX FLG LOCK 1/2-13 PLT 25P FRONT OPENER MOUNT WELDMT WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT PARALLEL ARM PIVOT BUSHING 25P UPPER SPRING LINK 25 SERIES UPPER PARALLEL ARM 25 SERIES UPPER PARALLEL ARM PIN HITCH 5/8 X 5 3/4 USABLE 25P REAR OPENER INNER PIVOT TB NUT FLANGE LOCK 3/8-16 PLT IDLER SPACER TUBE 1/2OD X 1.56 IDLER SPOOL 1.44OD X.53B X1.5L AM SEED TUBE DIRT GASKET HFS 1/2-13X6 1/8GR5 PLT HHCS 3/8-16X3/4 GR5 WASHER LOCK SPRING 3/8 PLT WASHER FLAT 3/8 SAE PLT HHCS 3/8-16X2 1/2 GR5 25 SERIES OPENER SHANK WELDMT SPRING EXT OD X.225 W 25P LOWER SPRING LINK 25 SERIES LOWER PARALLEL ARM 25 SRS LOWER PARALLEL ARM SPKT 41C12 W/SS SPCL PLT CHAIN RL # PITCHES CHAIN RL # PITCHES CHAIN RL #41 94 PITCHES PEER 7/8 HEX BRG AND MNT HHCS 3/8-16X1 GR5 WASHER FLAT 5/8 USS PLT NUT HEX 3/8-16 PLT TWIN ROW SPACER BRACKET UPPER RHSNB 3/8-16X1 GR5 TWIN ROW SPACER BRACKET LOWER (S/N B1027J-) (S/N B1028J+) (S/N B1027J-) (S/N B1028J+) Used with Rear Opener Mount Used with Middle Opener Mount Used with Front Opener Mount 01/04/ P

88 Opener Body Table of Contents Part Number Index P /04/18

89 Opener Body Table of Contents Part Number Index Opener Ref. Part No. Part Description Comments Revision dwg C C D C D C C D S H H C C S C C D C D D C D C C C H D C C C D D D C C D D C C C C S S C D D D D C C C C Image No. CABLE TIE.19X D 50LB SNAP RING EXT 5/8.050 T 20 SER OPNR CAM PIN RHSNB 5/16-18X3/4 GR5 SCRAPER, DISC RH PIN COTTER 3/32 X 1 LONG PIN CLEVIS 1/4 X 2 1/2 PLT PLANTER HANDLE ADJUSTMENT ASSY RPBY A 25P MID PRESS WHEEL MOUNT SEED FLAP, RUBBER, SEED-LOK SEED FLAP, UHMW, LONG SEED TUBE AM TB,CLIP & SENSOR DJ PLANTER STYLE SEED SENSOR SEED TUBE AIRMETER 25 SER SEED TUBE 25S HOOK CLIP SCRW SET SQ HD 1/2-13X1 3/4GR5 25P SIDE DEPTH WHL ARM SPINDLE SPINDLE, GA WHL MNT ADJ NUT HEX WHIZ 5/16-18 PLT SCRAPER, DISC LH ELBOW PTC 1/4 X 3/8 PIN ROLL 5/16 X 7/8 PIN ROLL 5/16 X 5/8 PLT 25P SCRAPER WEP WLDMT 3/8 FRT DISK SHIELD SPRING COMP.72 X 1.5 X.072WD WASHER 3/4 X 17/32 X 18 GA PLT PIN COTTER 3/32 X 1 LONG WALKBEAM MOUNT WALKBEAM PIVOT PIN WALKBEAM PIN ROLL 1/4 X 1 1/2 LG PLT PIN ROLL 5/32 X 1 1/2 PLT 25P SIDE DEPTH WHEEL ARM ARM, GAUGE WHEEL GREASE ZERK STRAIGHT 1/4-28 HHCS 1/2-13X3 GR5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT 25P NARROW ELIMINATOR BUSH ASY 25P WIDE ELIMINATOR BUSHNG ASY U CUP SEAL OUTER BUSHING INNER CUP SEAL I 25P O-RING BUSHING 25P DEPTH WHL ECCENTRIC BUSHNG ECCENTRIC BUSHING 25P ECCENTRIC HEX ADJUSTER HFS 1/2-13 X 1 1/2 GR8 NYL PLT WASHER MACH 1.19 X.63 X 18GA WASHER FLAT 1.31ODX.65IDX.188T Includes items S/N B1027J- S/N B1028J+ S/N B1016J+ S/N B1015J- Includes items (Shown) Used with 2 1/2" & 3" wide tires Used with 4" wide tires Includes items Used with 2 1/2" & 3" wide tires Includes items Used with 4" wide tires (Shown) Used with 2 1/2" & 3" wide tires Used with 4" wide tires (Shown) Used with 2 1/2" & 3" wide tires Used with 4" wide tires 01/04/ P

90 Table of Contents Opener Body (continued) Part Number Index Ref Part No C C C C C S V C C C D C C C C D H H C C D D Part Description 2.5X16 SIDE DEPTH WHEEL ASSY 3X16 SIDE DEPTH WHEEL ASSY 4 X 16 GAUGE TIRE ASSY-PLASTIC HHCS 5/8-11X3 1/4 GR5 HHCS 5/8-11 X 3 GR8 4.0 MM 15 DISC W/ 5/8 ASSY BRG AA205DD 4.0 MM 15 DISK (21 DEG BEVEL) HSG RIBB FLG 6BOLT PLT RIVET,BUTTON HEAD 1/4 X 1/2 DD BRG FLANGE DUST COVER HHCS 5/8-11X1 1/2 GR5 NYL WASHER LOCK SPRING 5/8 PLT HHCS 1/2-13X1 1/2 GR5 HHCS 1/2-13X1 GR5 1X12 PW ADJUSTER RPBY A LONG PQ MOUNT CABLE TIE.19X15 PANDU BT4S-CO RHSNB 1/2-13X1 1/2 GR5 TOP COVER COVER Comments Includes items S/N B1027J- S/N B1028J+ Revision P /04/18

91 Table of Contents Part Number Index Opener Opener Body (continued) This Page Intentionally Left Blank 01/04/ P

92 Row-Pro Table of Contents Part Number Index P /04/18

93 Row-Pro Table of Contents Part Number Index Opener Ref. Part No. Part Description Comments Revision dwg C C D C C C C C C C C C K R R C C C C R C C C D C C C C C C D C D C C C C C H D C C C C C D C D D D D D C C C C Image No. 12V AIR COMPRESSOR HHCS 3/8-16X1 GR5 COMPRESSOR MOUNT WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT PRESSURE SWITCH, 150PSIR TEE 1/4NPT BRASS FXMXF PRESSURE SWITCH, 135PSIF SCREW PAN HD #6-32 X 1 PLT 1/4 PIPE BULKHEAD FITTING AD PUSH 1/4TUBEX1/4MNPT GROMMET,.75IDX1.25ODX.063 UNLOADER VALVE ASSEMBLY TUBING NYLON 1/4OD X.17ID GRN TUBING NYLON 1/4OD X.17ID RED CHECK VALVE PTFE HOSE ASM - 1/4 X 36 CP 1/4 PUSH LOK POLY AD 1/2FNPT X 1/2 BARB BRASS TUBING 5/8 OD X.5OD BLK NYLON AD 1/2MNPT X 1/2 BARB BRASS HSHCS 1/4-20X1 1/2 MAC DA SOLENOID VALVE ASM MODULE MOUNT WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT RELIEF VALVE 3/4 MNPT X 1/4 FNPT BUSHING NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT TANK MOUNT CAP U-BOLT 1/2-13 X 3 1/32 X 3 AIR TANK MOUNT AD 3/8MNPT X 3/8OD TUBE PTC TANK AIR 1488 CU IN 2 1/2" PRESSURE GAUGE 160 PSI ELBOW PTC 1/4 X 1/4MNPT PETCOCK 1/4 BRASS 25 SERIES UPPER PARALLEL ARM 3/8 ID X 5/8 OD X.125 SPCR PIN CLEVIS 3/8 X 3 PLT 2"DIA X 3.25" STROKE DA CYL DJ HARNESS, DOWN PRESSURE HSHCS #10-32X5/8 WASHER FLAT #10 SAE PLT WASHER LOCK #10 25 SRS LOWER PARALLEL ARM SNAP RING EXT 5/8.050 T 20 SER OPNR CAM PIN PIVOT PIN SIDE STRAP INNER STOP MOUNT BEAM PIVOT PIN CAST WALK BEAM MS FC23 LOAD CELL PIN COTTER 3/32 X 1 LONG WASHER 3/4 X 17/32 X 18 GA PLT 01/04/ P

94 Table of Contents Row-Pro (continued) Part Number Index Ref Part No C D D C C C C R C C C C C C C C C C S C C C C C C D C Part Description SPRING COMP.72 X 1.5 X.072WD PLANTER HANDLE STOP PIVOT CASTING MACHINED TE POLY 1/4 PUSH LOCK FUSE ASSEMBLY 8' EXTENSION HARNESS 11' EXTENSION HARNESS TUBING 3/8 X.275 BLK NYLON AD 3/8 TUBE X 3/8 TUBE PTC UNION Y-TUBE 1/4" PTC AD 1/4MNPT X 3/8OD TUBE PTC AD 3/8MNPT 1/4FNPT AD 1/8MNPT X 3/8 TUBE PTC BREATHER VENT 1/8" MNPT PL 1/8MNPT WASHER LOCK #6 SS NUT HEX 6-32 SS COMPRESSOR HARNESS DJ DWN PRESSURE I/O MODULE A/S NUT HEX PLT SCREW THUMB 3/8-16 X 5/8 PLT NUT HEX PLT WASHER BELLVL.53X1.25X.089 WASHER BELLVL.53X1.25X.078 HHCS 1/4-20X1 1/4 GR5 ROW UNIT MODULE MOUNT WASHER FLAT 1/4 SAE PLT Comments Revision P /04/18

95 Table of Contents Part Number Index Opener Row-Pro (continued) This Page Intentionally Left Blank 01/04/ P

96 Table of Contents Hub Assembly ( C & S) Part Number Index P /04/18

97 Table of Contents Part Number Index Opener Hub Assembly ( C & S) Ref. Part No. Part Description Comments Revision dwg22747 A270 CR C C C HU C C C HS C C D D C C C S C Image No. MARTIN HA13270 SPINDLE MARTIN 3 LIP SEAL (JD AA26234) BRG CONE 1.00ID L44643 BRG CUP 1.98OD L44610 RHSNB 7/16-14X1 1/2 GR5 MARTIN HA13270 HUB HOUSING NUT HEX WHIZ 7/16-14 PLT WASHER FLAT 3/4 SAE PLT NUT HEX SLOTTED 3/4-16 GREASE CAP FOR MARTIN C PIN COTTER 5/32 X 1 1/4 LG RHSNB 1/2-13X1 1/4 GR5 NARROW HUB BOLT SPACER NARROW COULTER HUB BRG BALL 1.18IDX2.44OD 5206KPP RPBY C HHCS 5/8-11X1 1/2 GR5 GP25S NARROW HUB ASM ROW CLEANER HUB ASM Includes items Includes items /04/ P

98 Table of Contents Rigid 13" Row Cleaner Part Number Index P /04/18

99 Table of Contents Part Number Index Opener Rigid 13" Row Cleaner Ref. Part No. Part Description Comments Revision dwg D H C C C C C C C V V C C H C C C C C Image No. UMC RC PIVOT TUBE DOUBLE ARM RC WLD RHSNB 1/2-13X1 3/4 GR5 NUT HEX FLG. LOCK 1/2-13 PLT. ROW CLEANER HUB ASM RC ARM PIVOT BUSHING RC HUB LOCK RIGID 13'" ROW CLEANER LH RIGID 13'" ROW CLEANER RH RIGID ROW CLEANER ASM RH RIGID ROW CLEANER ASM LH DEPTH BEND WHEEL DECAL SHARP OBJECT WARNING UM ROW CLEAN DOWN STOP WLDM RHSNB 5/16-18X1 1/4 GR5 NUT HEX 5/16-18 PLT WASHER LOCK SPRING 5/16 PLT WASHER FLAT 1/2 USS PLT WASHER FLAT 1 SAE Refer to "Hub Assembly ( C & S)" for breakdown 01/04/ P

100 Table of Contents Row Cleaner Unit Mount Assembly Part Number Index P /04/18

101 Table of Contents Part Number Index Opener Row Cleaner Unit Mount Assembly Ref. Part No. Part Description Comments Revision dwg D D D D H C C C C C C C C C C Image No. UMRC MOUNT ROUND TUBE ROW CLEANER PIVOT PIPE UMRC ADJUSTMENT TUBE SPACER UMRC MOUNT WELD RHSNB 1/2-13X1 1/2 GR5 HHCS 7/16-14X1 1/4 GR5 PLT NUT HEX 1/2-13 PLT WASHER LOCK 7/16 PLT WASHER LOCK SPRING 1/2 PLT PIN CLEVIS 3/8 X 3 PLT PARALLEL ARM PIVOT BUSHING PIN HAIR COTTER.092 WIRE RHSNB 1/2-13X5 GR5 NUT HEX FLG. LOCK 1/2-13 PLT. 01/04/ P

102 Table of Contents Row Cleaner Extension Mount Part Number Index P /04/18

103 Table of Contents Part Number Index Opener Row Cleaner Extension Mount Ref. Part No. Part Description Comments Revision dwg H H H H H H C C C C C D C Image No. UNIT MOUNTED COULTER MOUNT DBL ROW CLNR EXTENDED MNT LH DBL ROW CLNR EXTENDED MNT RH DOUBLE ARM RC WLD SINGLE ARM RC WLD LH SINGLE ARM RC WLD RH HHCS 7/8-9X2 GR5 NUT HEX 7/8-9 PLT NUT HEX FLG. LOCK 1/2-13 PLT. WASHER FLAT 1/2 USS PLT RC ARM PIVOT BUSHING UMC RC PIVOT TUBE RHSNB 1/2-13X1 3/4 GR5 Shown 01/04/ P

104 Seed Lok Table of Contents Part Number Index P /04/18

105 Seed Lok Table of Contents Part Number Index Opener Ref. Part No. Part Description Comments Revision dwg C D C H D C C D C D C C A C C C S C C D D Image No. PIN COTTER 5/32 X 1 1/4 LG LEVER, SEED LOK SPRING.540 O.D.X 1 1/4 X.054W LOCK ROD WELD SEED LOK MOUNT RHSNB 5/16-18X3/4 GR5 NUT HEX WHIZ 5/16-18 PLT JD KINZE SEED LOK LOWER MOUNT SNAP RING 1/2 EXTERNAL HEAVY SEED LOK WHEEL ARM SCR HX SKT BUT CP 3/8-16X3/4 WASHER INTERNAL STAR 3/8 PLT. RPBY V SCR PH THD FMG #10X1/2 TP ZP RETAINER W/BONDED SEAL 4BLT 5/8 X 6 SEED LOK WHEEL 6 SEED LOK ASSEMBLY WASHER 1.5 X.51 X.187 SPRING EXT 1 X 4 X.135 WD SEED LOK PIVOT PIN LEVER STOP 01/04/ P

106 Table of Contents Side Depth Wheel Assembly Part Number Index P /04/18

107 Table of Contents Part Number Index Opener Side Depth Wheel Assembly Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C C C C C C C Image No. 4 X 16 GAUGE TIRE ASSY-PLASTIC 2.5X16 SIDE DEPTH WHEEL ASSY 3X16 SIDE DEPTH WHEEL ASSY FLG TP LK 5/16-18ZNYCR 4 X 16 GAUGE WHEEL RIM 4 1/2 X 16 GAUGE TIRE BRG.63ID PRESS WHL ASY 4 X 16 GAUGE WHEEL RIM HALF HFSS 5/16-18X1 3/4 GR5 HFSS 5/16-18X1 GR5 PLT RHSNB 5/16-18X3/4 GR5 HFS 5/16-18X3/4 GR5 2.25X16'" TIRE FOR C 2.25X16'" RIM HALF FOR C 3X 16'" TIRE FOR C 3X16 NYLON WHEEL HALF-40MM 01/04/ P

108 Table of Contents Part Number Index 25 Series Side Depth Wheel Scraper Assembly P /04/18

109 Table of Contents Part Number Index Opener 25 Series Side Depth Wheel Scraper Assembly Ref. Part No. Part Description Comments Revision dwg C D D D C C Image No. HHCS 1/2-13X3 1/4 GR5 2.5" GAUGE WHEEL SCRAPER 4" GAUGE WHEEL SCRAPER 3" GAUGE WHEEL SCRAPER WASHER FLAT 1/2 SAE PLT NUT HEX 1/2-13 PLT Shown 01/04/ P

110 Table of Contents 25 Series Keeton Seed Firmer (Option) Part Number Index P /04/18

111 Table of Contents Part Number Index Opener 25 Series Keeton Seed Firmer (Option) Ref. Part No. Part Description Comments Revision dwg BXT C C C C C Image No. KEETON NARROW TAIL BRACKET FOR C REV A&B RHSNB 3/8-16X1 3/4 GR5 NUT HEX 3/8-16 PLT WASHER LOCK SPRING 3/8 PLT NUT HEX WHIZ 5/16-18 PLT HHCS 5/16-18X2 1/2 GR5 01/04/ P

112 Table of Contents Single Arm RC Assembly Part Number Index P /04/18

113 Table of Contents Part Number Index Opener Single Arm RC Assembly Ref. Part No. Part Description Comments Revision dwg D H H C C C C C C C C C V V H C C C C C Image No. UMC RC PIVOT TUBE SINGLE ARM RC WLD RH SINGLE ARM RC WLD LH RHSNB 1/2-13X1 3/4 GR5 NUT HEX FLG. LOCK 1/2-13 PLT. ROW CLEANER HUB ASM RC ARM PIVOT BUSHING RC HUB LOCK RIGID 13'" ROW CLEANER RH RIGID 13'" ROW CLEANER LH DEPTH BEND WHEEL DECAL SHARP OBJECT WARNING RIGID ROW CLEANER ASM RH RIGID ROW CLEANER ASM LH UM ROW CLEAN DOWN STOP WLDM RHSNB 5/16-18X1 1/4 GR5 NUT HEX 5/16-18 PLT WASHER LOCK SPRING 5/16 PLT WASHER FLAT 1/2 USS PLT WASHER FLAT 1 SAE Refer to "Hub Assembly ( C & S) for breakdown 01/04/ P

114 Table of Contents Unit Mount Coulter Part Number Index P /04/18

115 Table of Contents Part Number Index Opener Unit Mount Coulter Ref. Part No. Part Description Comments Revision dwg S H C C C C C C C C C C C Image No. GP25S NARROW HUB ASM UNIT MOUNTED COULTER MOUNT HHCS 5/8-11X4 GR5 RHSNB 1/2-13X1 1/2 GR5 NUT HEX 1/2-13 PLT NUT HEX 5/8-11 PLT WASHER LOCK SPRING 1/2 PLT WASHER LOCK SPRING 5/8 PLT DECAL GP PLANTING COMPONENTS COULTER BLADE-14 DIA STRAIGHT COULTER BLADE (TURBO) 15'" OD COULTER BLADE (FLUTED) 15'" OD NUT HEX FLANGE 1/2-13 GR G PLT Refer to "Hub Assembly ( C S)" for breakdown Used on Vlll ONLY Shown 01/04/ P

116 Table of Contents Press Wheel Assembly (S/N B1027J-) Part Number Index P /04/18

117 Table of Contents Part Number Index Press Wheels Press Wheel Assembly (S/N B1027J-) Ref. Part No. Part Description Comments Revision dwg D H H D D D C C C C D C C D C C C C C C C C C S A H C C C C C C C Image No. PW SPRING HANDLE RPBY A 25P 16 DEG CENTERED PW MOUNT 25P PW HANDLE SPACER TUBE PARALLEL ARM PIVOT TUBE 1/4 PW SPACER 5/8 DIA HHCS 5/8-11X3 1/4 GR5 HHCS 5/8-11X4 GR5 HHCS 3/8-16X5 1/2 GR5 NUT HEX 5/8-11 PLT SPRING ALIGNMENT BUSHING WASHER FLAT 3/8 USS PLT WASHER LOCK SPRING 5/8 PLT RPBY A OR A PIN COTTER 1/8 X 3/4 PIN CLEVIS 7/16 X 3 17/64 USBL SPRING 1 5/8 OD X X 12 PRESS WHL ASSY-5203BRG 1.25 X 13.5 PRESS WHEEL ASSY PRESS WHEEL ARM PIVOT BUSHING PIN CLEVIS 5/8 X 3 49/64 USBL PIN COTTER 1/8 X 1 1/4 PLT NUT FLANGE LOCK 3/8-16 PLT CAST WEDGE PW ASSY 25P MID PW MOUNT KIT 25P MID PW MOUNT UPDATE RHSNB 7/16-14X1 3/4 GR5 NUT HEX FLANGE LOC 7/16-14 PLT WASHER LOCK 7/16 PLT WASHER FLAT 7/16 SAE PLT PIN CLEVIS 5/8 X 3 49/64 USBL 20 SER PW ARM PIVOT SPACER TB BUSHING 3/4OD X 5/8ID X 1/2 LG Used with Items 17 and 18 Used with Item 23 Refer to "Press Wheel Breakdowns" for breakdown Refer to "Press Wheel Breakdowns" for breakdown Refer to "Press Wheel Breakdowns" for breakdown 01/04/ P

118 Table of Contents Part Number Index Press Wheel Assembly (S/N B1028J - B1072J) P /04/18

119 Table of Contents Part Number Index Press Wheels Press Wheel Assembly (S/N B1028J - B1072J) Ref. Part No. Part Description Comments Revision dwg D D D D H H H H D D C C C C C C C C C C C C C C S Image No. 25P PW HANDLE SPACER TUBE PW SPRING HANDLE SPRING ALIGNMENT BUSHING PRESS WHEEL PVT MNT TUBE LONG PQ MOUNT 25P MID PW MOUNT 25P 20 DEG CENTERED PW MOUNT 25P 16 DEG CENTERED PW MOUNT PARALLEL ARM PIVOT TUBE 1/4 PW SPACER 5/8 DIA HHCS 5/8-11X4 GR5 HHCS 5/8-11X3 1/4 GR5 HHCS 1/2-13X4 1/2 GR5 NUT HEX 5/8-11 PLT NUT HEX FLG LOCK 1/2-13 PLT WASHER LOCK SPRING 5/8 PLT PIN COTTER 1/8 X 3/4 PIN COTTER 1/8 X 1 1/4 PLT PIN CLEVIS 7/16 X 3 17/64 USBL PIN CLEVIS 5/8 X 3 1/4 SPRING 1.8 OC X 11 LG 1.25 X 13.5 PRESS WHEEL ASSY PARALLEL ARM PIVOT BUSHING 1 X 12 PRESS WHL ASSY-5203BRG CAST WEDGE PW ASSY Shown Shown. Used with 20 Deg Press Wheel Used with 16 Deg Press Wheel Only used with 20 Deg Press Wheel Shown. Used with 20 Deg Press Wheel Used with 16 Deg Press Wheel Refer to Press Wheel Breakdown for breakdown Refer to Press Wheel Breakdown for breakdown 01/04/ P

120 Table of Contents Part Number Index 12-12D Cast Press Wheels (S/N B1073J+) P /04/18

121 Table of Contents Part Number Index Press Wheels 12-12D Cast Press Wheels (S/N B1073J+) Ref. Part No. Part Description Comments Revision dwg H C C C D S C D C C H C C C C C D D C C H C C C D H Image No. 25 SER 12 DEG ADJ PW ARM WLDMT HHCS 5/8-11X3 1/4 GR5 WASHER LOCK SPRING 5/8 PLT MAC-LOK 3/8-16 SUPER FLANGE CAST PRESS WHEEL COVER DISK CAST WEDGE PW ASY 40 DEG HHCS 3/8-16X1 1/4 GR5 1/4 PW SPACER 5/8 DIA HHCS 1/2-13X1 3/4 GR5 WASHER FLAT 1/2 HARD ASTMF SER 12 DEG STAG PW ARM WLD NUT HEX FLG LOCK 1/2-13 PLT PIN COTTER 1/8 X 1 PIN CLEVIS 7/16 X 1 1/2 PRESS WHEEL SPRING ADJ HANDLE HHCS 1/2-13X4 1/2 GR5 PRESS WHEEL PVT MNT TUBE SPRING ALIGNMENT BUSHING PIN CLEVIS 5/8 X 3 1/4 PARALLEL ARM PIVOT BUSHING 25P MID PW MOUNT SPRING 1.8 OC X 11 LG SNAP RING INT 40 MM BRG.63ID PRESS WHL ASY CAST WEDGE PW MACHINED 40 DEG LONG PW MOUNT (ONLY) used with Staggered Press Wheel Weldment (ONLY) used with Staggered Press Wheel Weldment Includes items: (ONLY) used with Staggered Press Wheel Weldment 01/04/ P

122 Table of Contents Part Number Index Press Wheel Assembly 1X12 & 1.25X13.5 (S/N B1073J+) P /04/18

123 Table of Contents Part Number Index Press Wheels Press Wheel Assembly 1X12 & 1.25X13.5 (S/N B1073J+) Ref. Part No. Part Description Comments Revision dwg H H C C C D C C H D C C C C C C C D C C H C C H C Image No. 25P MID PW MOUNT LONG PW MOUNT PARALLEL ARM PIVOT BUSHING PIN CLEVIS 5/8 X 3 1/4 PIN COTTER 1/8 X 1 SPRING ALIGNMENT BUSHING SPRING 1.8 OC X 11 LG NUT HEX FLG LOCK 1/2-13 PLT 25 SER 12 DEG STAG PW ARM WLD PRESS WHEEL PVT MNT TUBE HHCS 1/2-13X4 1/2 GR5 PRESS WHEEL SPRING ADJ HANDLE WASHER FLAT 1/2 HARD ASTMF436 PIN CLEVIS 7/16 X 1 1/ X 13.5 WEDGE HD PW ASSY HHCS 1/2-13X1 3/4 GR5 1 X 12 PRESS WHL ASSY-5203BRG 1/4 PW SPACER 5/8 DIA WASHER LOCK SPRING 5/8 PLT HHCS 5/8-11X3 1/4 GR5 LH DRIBBLER TUBE WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT RH DRIBBLER TUBE RHSNB 5/16-18X3/4 GR5 01/04/ P

124 Table of Contents Part Number Index Press Wheel Assembly Front With Cast Wheels P /04/18

125 Table of Contents Part Number Index Press Wheels Press Wheel Assembly Front With Cast Wheels Ref. Part No. Part Description Comments Revision dwg D D H S H H D C C C C C C C C C C C C C C D Image No. SPRING ALIGNMENT BUSHING PRESS WHEEL PVT MNT TUBE LONG PW MOUNT CAST WEDGE PW ASY 40 DEG 25 SER 12 DEG ADJ PW ARM WLDMT 25 SER 12 DEG STAG PW ARM WLD 1/4 PW SPACER 5/8 DIA HHCS 1/2-13X1 3/4 GR5 HHCS 5/8-11X3 1/4 GR5 HHCS 1/2-13X4 1/2 GR5 NUT HEX FLG LOCK 1/2-13 PLT WASHER LOCK SPRING 5/8 PLT WASHER FLAT 1/2 HARD ASTMF436 PIN COTTER 1/8 X 1 PIN CLEVIS 5/8 X 3 1/4 PIN CLEVIS 7/16 X 1 1/2 SPRING 1.8 OC X 11 LG PRESS WHEEL SPRING ADJ HANDLE PARALLEL ARM PIVOT BUSHING SNAP RING INT 40 MM BRG.63ID PRESS WHL ASY CAST WEDGE PW MACHINED 40 DEG Shown 01/04/ P

126 Table of Contents Part Number Index Press Wheel Assembly Rear With Cast Wheels P /04/18

127 Table of Contents Part Number Index Press Wheels Press Wheel Assembly Rear With Cast Wheels Ref. Part No. Part Description Comments Revision dwg D D H S H H D C C C C C C C C C C C C C C D Image No. SPRING ALIGNMENT BUSHING PRESS WHEEL PVT MNT TUBE 25P MID PW MOUNT CAST WEDGE PW ASY 40 DEG 25 SER 12 DEG ADJ PW ARM WLDMT 25 SER 12 DEG STAG PW ARM WLD 1/4 PW SPACER 5/8 DIA HHCS 1/2-13X1 3/4 GR5 HHCS 5/8-11X3 1/4 GR5 HHCS 1/2-13X4 1/2 GR5 NUT HEX FLG LOCK 1/2-13 PLT WASHER LOCK SPRING 5/8 PLT WASHER FLAT 1/2 HARD ASTMF436 PIN COTTER 1/8 X 1 PIN CLEVIS 5/8 X 3 1/4 PIN CLEVIS 7/16 X 1 1/2 SPRING 1.8 OC X 11 LG PRESS WHEEL SPRING ADJ HANDLE PARALLEL ARM PIVOT BUSHING SNAP RING INT 40 MM BRG.63ID PRESS WHL ASY CAST WEDGE PW MACHINED 40 DEG Shown 01/04/ P

128 Table of Contents Part Number Index Press Wheel Assembly LH Short (S/N B1027J-) P /04/18

129 Table of Contents Part Number Index Press Wheels Press Wheel Assembly LH Short (S/N B1027J-) Ref. Part No. Part Description Comments Revision dwg D H H H D D D C C C C D C C D C C C C C C C C C D H C C C S A H C C C C C C C Image No. PW SPRING HANDLE RPBY A 25P RH OFFSET PW MOUNT 25P LH OFFSET PW MOUNT 25P PW HANDLE SPACER TUBE PARALLEL ARM PIVOT TUBE 1/4 PW SPACER 5/8 DIA HHCS 5/8-11X3 1/4 GR5 HHCS 5/8-11X4 GR5 HHCS 3/8-16X5 1/2 GR5 NUT HEX 5/8-11 PLT SPRING ALIGNMENT BUSHING WASHER FLAT 3/8 USS PLT WASHER LOCK SPRING 5/8 PLT RPBY A OR A PIN COTTER 1/8 X 3/4 PIN CLEVIS 7/16 X 3 17/64 USBL SPRING 1 5/8 OD X X 12 PRESS WHL ASSY-5203BRG 1.25 X 13.5 PRESS WHEEL ASSY PRESS WHEEL ARM PIVOT BUSHING PIN CLEVIS 5/8 X 3 49/64 USBL PIN COTTER 1/8 X 1 1/4 PLT NUT FLANGE LOCK 3/8-16 PLT PW HANDLE SPACER TUBE LH DRIBBLER TUBE RHSNB 5/16-18X3/4 GR5 WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT CAST WEDGE PW ASSY 25P MID PW MOUNT KIT 25P MID PW MOUNT UPDATE RHSNB 7/16-14X1 3/4 GR5 NUT HEX FLANGE LOC 7/16-14 PLT WASHER LOCK 7/16 PLT WASHER FLAT 7/16 SAE PLT PIN CLEVIS 5/8 X 3 49/64 USBL 20 SER PW ARM PIVOT SPACER TB BUSHING 3/4OD X 5/8ID X 1/2 LG Used on short (front) stagger row units on twin row spacing Used on short (front) stagger row units on twin row spacing Used on long (rear) stagger row units on twin row spacing Used with Items 17 and 18 Used with Item 28 Refer to "Press Wheel Breakdowns" for breakdown Refer to "Press Wheel Breakdowns" for breakdown Refer to "Press Wheel Breakdowns" for breakdown 01/04/ P

130 Table of Contents Part Number Index Press Wheel Assembly LH Short (S/N B1028J - B1072J P /04/18

131 Table of Contents Part Number Index Press Wheels Press Wheel Assembly LH Short (S/N B1028J - B1072J Ref. Part No. Part Description Comments Revision dwg D D D D D H H D C C C C C C C C C C C C C C C H C S Image No. PW HANDLE SPACER TUBE 25P PW HANDLE SPACER TUBE PW SPRING HANDLE SPRING ALIGNMENT BUSHING PRESS WHEEL PVT MNT TUBE 25P MID PW MOUNT 25P LH OFFSET PW MOUNT 1/4 PW SPACER 5/8 DIA HHCS 5/8-11X3 1/4 GR5 HHCS 1/2-13X4 1/2 GR5 NUT HEX 5/8-11 PLT NUT HEX FLG LOCK 1/2-13 PLT WASHER LOCK SPRING 5/8 PLT PIN COTTER 1/8 X 3/4 PIN COTTER 1/8 X 1 1/4 PLT PIN CLEVIS 7/16 X 3 17/64 USBL PIN CLEVIS 5/8 X 3 1/4 SPRING 1.8 OC X 11 LG 1 X 12 PRESS WHL ASSY-5203BRG PARALLEL ARM PIVOT BUSHING 1.25 X 13.5 PRESS WHEEL ASSY NUT HEX 5/16-18 PLT WASHER LOCK SPRING 5/16 PLT LH DRIBBLER TUBE RHSNB 5/16-18X3/4 GR5 CAST WEDGE PW ASSY 01/04/ P

132 Table of Contents Part Number Index Press Wheel Assembly RH Long (S/N B1027J-) P /04/18

133 Table of Contents Part Number Index Press Wheels Press Wheel Assembly RH Long (S/N B1027J-) Ref. Part No. Part Description Comments Revision dwg D H H H D D D C C C C D C C D C C C C C C C C C D H C C C S A H C C C C C C C Image No. PW SPRING HANDLE RPBY A 25P RH OFFSET PW MOUNT 25P LONG PW MOUNT EXTENSION 25P PW HANDLE SPACER TUBE PARALLEL ARM PIVOT TUBE 1/4 PW SPACER 5/8 DIA HHCS 5/8-11X3 1/4 GR5 HHCS 5/8-11X4 GR5 HHCS 3/8-16X5 1/2 GR5 NUT HEX 5/8-11 PLT SPRING ALIGNMENT BUSHING WASHER FLAT 3/8 USS PLT WASHER LOCK SPRING 5/8 PLT RPBY A OR A PIN COTTER 1/8 X 3/4 PIN CLEVIS 7/16 X 3 17/64 USBL SPRING 1 5/8 OD X X 12 PRESS WHL ASSY-5203BRG 1.25 X 13.5 PRESS WHEEL ASSY PRESS WHEEL ARM PIVOT BUSHING PIN CLEVIS 5/8 X 3 49/64 USBL PIN COTTER 1/8 X 1 1/4 PLT NUT FLANGE LOCK 3/8-16 PLT PW HANDLE SPACER TUBE RH DRIBBLER TUBE RHSNB 5/16-18X3/4 GR5 WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT CAST WEDGE PW ASSY 25P LONG PW MOUNT KIT 25P LONG PW MOUNT UPDATE RHSNB 7/16-14X1 3/4 GR5 NUT HEX FLANGE LOC 7/16-14 PLT WASHER LOCK 7/16 PLT WASHER FLAT 7/16 SAE PLT PIN CLEVIS 5/8 X 3 49/64 USBL 20 SER PW ARM PIVOT SPACER TB BUSHING 3/4OD X 5/8ID X 1/2 LG Used on long (rear) stagger row units on twin row spacing. Used on long (rear) stagger row units on twin row spacing. Used on long (rear) stagger row units on twin row spacing. Used with Items 17 and 18 Used with Item 28 Refer to "Press Wheel Breakdowns" for breakdown Refer to "Press Wheel Breakdowns" for breakdown Refer to "Press Wheel Breakdowns" for breakdown 01/04/ P

134 Table of Contents Part Number Index Press Wheel Assembly RH Long (S/N B1028J - B1072J) P /04/18

135 Table of Contents Part Number Index Press Wheels Press Wheel Assembly RH Long (S/N B1028J - B1072J) Ref. Part No. Part Description Comments Revision dwg D D D D D H H D C C C C C C C C C C C C C C C H C S Image No. PW HANDLE SPACER TUBE 25P PW HANDLE SPACER TUBE PW SPRING HANDLE SPRING ALIGNMENT BUSHING PRESS WHEEL PVT MNT TUBE LONG PQ MOUNT 25P RH OFFSET PW MOUNT 1/4 PW SPACER 5/8 DIA HHCS 5/8-11X3 1/4 GR5 HHCS 1/2-13X4 1/2 GR5 NUT HEX 5/8-11 PLT NUT HEX FLG LOCK 1/2-13 PLT WASHER LOCK SPRING 5/8 PLT PIN COTTER 1/8 X 3/4 PIN COTTER 1/8 X 1 1/4 PLT PIN CLEVIS 7/16 X 3 17/64 USBL PIN CLEVIS 5/8 X 3 1/4 SPRING 1.8 OC X 11 LG 1.25 X 13.5 PRESS WHEEL ASSY PARALLEL ARM PIVOT BUSHING 1 X 12 PRESS WHL ASSY-5203BRG NUT HEX 5/16-18 PLT WASHER LOCK SPRING 5/16 PLT RH DRIBBLER TUBE RHSNB 5/16-18X3/4 GR5 CAST WEDGE PW ASSY Refer to Press Wheel Breakdown for breakdown Refer to Press Wheel Breakdown for breakdown 01/04/ P

136 Table of Contents Part Number Index Press Wheel Assembly With Spider Wheels (S/N B1027J-) P /04/18

137 Table of Contents Part Number Index Press Wheels Press Wheel Assembly With Spider Wheels (S/N B1027J-) Ref. Part No. Part Description Comments Revision dwg H H H H D D D H H D D S S D C C C C C C C C C C C C C C D H C C H C C D D C C C A A H H C C C C C C C C Image No. 25P 20 DEG CENTERED PW MOUNT 25P RH OFFSET PW MOUNT 25P LH OFFSET PW MOUNT 25P 16 DEG CENTERED PW MOUNT 25P PW HANDLE SPACER TUBE RPBY A OR A PW SPRING HANDLE RPBY A RPBY A SPRING ALIGNMENT BUSHING PARALLEL ARM PIVOT TUBE LH 45 DEG TOOTH WHEEL ASM RH 45 DEG TOOTH WHEEL ASM 1/4 PW SPACER 5/8 DIA HHCS 5/8-11X4 GR5 HHCS 5/8-11X3 1/2 GR5 HHCS 3/8-16X5 1/2 GR5 NUT HEX 5/8-11 PLT NUT FLANGE LOCK 3/8-16 PLT WASHER FLAT 3/8 USS PLT WASHER FLAT 5/8 SAE PLT WASHER LOCK SPRING 5/8 PLT PIN COTTER 1/8 X 3/4 PIN COTTER 1/8 X 1 1/4 PLT PIN CLEVIS 7/16 X 3 17/64 USBL PIN CLEVIS 5/8 X 3 49/64 USBL SPRING 1 5/8 OD X 8.2 PRESS WHEEL ARM PIVOT BUSHING PW HANDLE SPACER TUBE LH 45 DEG TOOTH CLOSING WHEEL BRG.63ID PRESS WHL ASY SNAP RING INT 40 MM RH 45 DEG TOOTH CLOSING WHEEL RHSNB 3/8-16X1 GR5 NUT LOCK 3/8-16 NYLON INSERT PLANTER DRAG CHAIN MOUNT PLANTER DRAG CHAIN MNT NARROW HHCS 7/16-14X1 1/2 GR5 TWIST LINK DRAG CHAIN 16 PITCH NUT HEX FLANGE LOC 7/16-14 PLT 25P LONG PW MOUNT KIT 25P MID PW MOUNT KIT 25P LONG PW MOUNT UPDATE 25P MID PW MOUNT UPDATE RHSNB 7/16-14X1 3/4 GR5 NUT HEX FLANGE LOC 7/16-14 PLT WASHER LOCK 7/16 PLT WASHER FLAT 7/16 SAE PLT PIN COTTER 1/8 X 3/4 PIN CLEVIS 5/8 X 3 49/64 USBL 20 SER PW ARM PIVOT SPACER TB BUSHING 3/4OD X 5/8ID X 1/2 LG Shown Used on 16 Deg. 10" Spacing Used with H Used on 16 Deg. 10" Spacing Used on LH or RH press wheel mount Shown Used on 16 Deg. 10" Spacing 01/04/ P

138 Table of Contents Part Number Index Press Wheel Assembly With Spider Wheels (S/N B1028J - B1027J) P /04/18

139 Table of Contents Part Number Index Press Wheels Press Wheel Assembly With Spider Wheels (S/N B1028J - B1027J) Ref. Part No. Part Description Comments Revision dwg H H H H D D D H H D D S S D C C C C C C C C C C C C C C D H C C H C C D D C C Image No. 25P 20 DEG CENTERED PW MOUNT 25P 16 DEG CENTERED PW MOUNT 25P LH OFFSET PW MOUNT 25P RH OFFSET PW MOUNT 25P PW HANDLE SPACER TUBE PRESS WHEEL PVT MNT TUBE PW SPRING HANDLE 25P MID PW MOUNT LONG PQ MOUNT SPRING ALIGNMENT BUSHING PARALLEL ARM PIVOT TUBE LH 45 DEG TOOTH WHEEL ASM RH 45 DEG TOOTH WHEEL ASM 1/4 PW SPACER 5/8 DIA HHCS 5/8-11X4 GR5 HHCS 5/8-11X3 1/2 GR5 HHCS 1/2-13X4 1/2 GR5 NUT HEX 5/8-11 PLT NUT HEX FLG LOCK 1/2-13 PLT NUT HEX FLANGE LOC 7/16-14 PLT WASHER FLAT 5/8 SAE PLT WASHER LOCK SPRING 5/8 PLT PIN COTTER 1/8 X 3/4 PIN COTTER 1/8 X 1 1/4 PLT PIN CLEVIS 7/16 X 3 17/64 USBL PIN CLEVIS 5/8 X 3 1/4 SPRING 1 5/8 OD X 8.2 PARALLEL ARM PIVOT BUSHING PW HANDLE SPACER TUBE LH 45 DEG TOOTH CLOSING WHEEL BRG.63ID PRESS WHL ASY SNAP RING INT 40 MM RH 45 DEG TOOTH CLOSING WHEEL RHSNB 3/8-16X1 GR5 NUT LOCK 3/8-16 NYLON INSERT PLANTER DRAG CHAIN MOUNT PLANTER DRAG CHAIN MNT NARROW HHCS 7/16-14X1 1/2 GR5 TWIST LINK DRAG CHAIN 16 PITCH Shown. Used with 20 Deg Press Wheels Used with 16 Deg Press Wheels LH RH Shown Only used with 20 Deg Press Wheels Includes items Includes items Only used with 20 Deg Press Wheels Not used with 20 Deg Press Wheels Used on LH or RH press wheel mount Shown Used on 16 Deg. 10" Spacing 01/04/ P

140 Table of Contents Part Number Index Press Wheel Assembly With Spider Wheels (S/N B1073J+) P /04/18

141 Table of Contents Part Number Index Press Wheels Press Wheel Assembly With Spider Wheels (S/N B1073J+) Ref. Part No. Part Description Comments Revision dwg C C D D C C C C C D H C C S S C C C H C C C C C D D C C C H H H Image No. HHCS 3/8-16X1 1/4 GR5 WASHER LOCK SPRING 3/8 PLT DRAG CHAIN BACKUP PLATE PLANTER DRAG CHAIN MOUNT HHCS 7/16-14X1 1/2 GR5 TWIST LINK DRAG CHAIN 16 PITCH NUT HEX FLANGE LOC 7/16-14 PLT HHCS 5/8-11X3 1/4 GR5 WASHER LOCK SPRING 5/8 PLT 1/4 PW SPACER 5/8 DIA LH 45 DEG TOOTH CLOSING WHEEL BRG.63ID PRESS WHL ASY SNAP RING INT 40 MM LH 45 DEG TOOTH WHEEL ASM RH 45 DEG TOOTH WHEEL ASM WASHER FLAT 5/8 SAE PLT HHCS 1/2-13X1 3/4 GR5 WASHER FLAT 1/2 HARD ASTMF SER 12 DEG STAG PW ARM WLD NUT HEX FLG LOCK 1/2-13 PLT PIN COTTER 1/8 X 1 PIN CLEVIS 7/16 X 1 1/2 PRESS WHEEL SPRING ADJ HANDLE HHCS 1/2-13X4 1/2 GR5 PRESS WHEEL PVT MNT TUBE SPRING ALIGNMENT BUSHING PIN CLEVIS 5/8 X 3 1/4 PARALLEL ARM PIVOT BUSHING SPRING 1.8 OC X 11 LG 25P MID PW MOUNT LONG PW MOUNT RH 45 DEG TOOTH CLOSING WHEEL Left Hand, Includes items: Right Hand, Includes items: 12, 13 & 31 01/04/ P

142 Table of Contents Closing Wheel Drop mount Part Number Index P /04/18

143 Table of Contents Part Number Index Press Wheels Closing Wheel Drop mount Ref. Part No. Part Description Comments Revision dwg D D D C C C H C C Image No. RH CLOSING WHEEL DROP PLATE LH CLOSING WHEEL DROP PLATE PLATE 1X10 OFFSET TO 25P HHCS 5/8-11X1 1/2 GR5 NUT HEX 5/8-11 PLT WASHER LOCK SPRING 5/8 PLT SPACER WELDMENT WASHER LOCK SPRING 3/8 PLT HHCS 3/8-16X1 1/2 GR5 01/04/ P

144 Table of Contents Press Wheel Breakdown Part Number Index P /04/18

145 Table of Contents Part Number Index Press Wheels Press Wheel Breakdown Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C Image No X 13.5 WEDGE HD PW ASSY HHCS 1/4-20X1 GR5 1 X 12 PRESS WHEEL RIM HALF BRG.63ID PRESS WHL ASY 1.25 X 13.5 PRESS WHEEL TIRE NUT HEX LOCK 1/4-20 FLG 1 X 12 PRESS WHL ASSY-5203BRG TIRE RUBBER 1 X 12 1 X 12 HD PRESS WHEEL RIM HALF RPBY C (S/N-) 01/04/ P

146 Table of Contents Down Pressure and Lift Hydraulics Part Number Index P /04/18

147 Table of Contents Part Number Index Hydraulics Down Pressure and Lift Hydraulics Ref. Part No. Part Description Comments Revision dwg C C D C C C C C C C C C C C C C C C C C C C C C D C C C C C C C C C C C C C C C Image No. CP 3/4FORB MALE QD POPPET TYPE HHCS 1/4-20X1 1/4 GR5 BRKT WET BOOM RELIEF WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT HHCS 1/4-20X2 1/2 GR5 EL 9/16MJIC 9/16FJIC EL 9/16MJIC 9/16MORB VALVE PRESS REDUCING W/CHECK AD 9/16MORB 1/4FNPT PRESSURE GAUGE 3000 PSI HH3/8R /16FJIC HH3/8R /16FJIC HH3/8R /16FJIC CYL 4 X 4 X 1.25 EL 3/4MORB 9/16MJIC TE 9/16MJIC 3/4MORB 9/16MJIC HH3/8R /4MORB 9/16FJIC HH3/8R /4MORB 9/16FJIC ONE-WAY RESTRICTOR VALVE HH3/8R /16FJIC HH3/8R /4FJIC NUT HEX 5/16-18 PLT WASHER FLAT 5/16 HARD ASTMF436 PLT VALVE MOUNT TE 9/16MJIC 9/16MJIC 9/16FJIC EL 9/16MJIC 3/4FJIC FILTER INLINE 3/4MORB 3/4MJIC CYL 2X13X1.125 ROD (TIE) HYDRAULIC BYPASS VALVE HHCS 5/16-18X2 3/4 GR5 HH3/8R /4FJIC 9/16FJIC TE 3/4MJIC HH3/8R /4FJIC 3/4FJIC AD 3/4MJIC 3/8MNPT EL 3/4MJIC 9/16MORB HH3/8R /4FJIC AD 3/4FJIC 3/8MNPT HH3/8R /16FJIC TE 9/16MJIC 3/4MORB 9/16MJIC Refer to "Pressure Reducing Valve ( C)" for breakdown Refer to "Hydraulic Cylinder C (4 x 4 x 1.25 Rod)" for breakdown Refer to "Hydraulic Cylinder C (2 x 13 x 1.25 Rod)" for breakdown 01/04/ P

148 Table of Contents Part Number Index Fan And Steering Hydraulics (S/N B1026J-) P /04/18

149 Table of Contents Part Number Index Hydraulics Fan And Steering Hydraulics (S/N B1026J-) Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C C C C C C C C C C C C C C C C C C C C D C C C C C C C C C C C Image No. HYD MOTOR PARKER 330C 0.99CIR AD 1 1/16MORB 3/4FORB AD 3/4MORB 3/4FJIC EL 3/4FJIC 3/4MJIC CP 9/16 FORB QD 1/4 BODY TE 3/4MJIC 3/4MORB 3/4MJIC TE 3/4MORB 3/4MJIC 3/4MJIC VALVE LINE CHECK EL 3/4MJIC 3/4MORB EL 9/16MJIC X 7/16MORB CYL 3X8 TRUN W/SENSOR AD 3/4MORB 3/4MJIC TE 3/4MJIC 3/4MJIC 3/4FJIC TE 3/4MJIC 3/4MORB 3/4MJIC TE 9/16MJIC 9/16MJIC 9/16MORB HH1/2R /4MORB 3/4FJIC90 HH1/4R /16FJIC HH1/2R /4FJIC HH3/8R /4FJIC HH3/8R /4FJIC HH1/4R /16FJIC HH1/2R /4FJIC 3/4MORB HH1/4R /16FJIC CP 3/4FORB MALE QD POPPET TYPE VALVE MANIFOLD FORWARD STEERIN WRAP HOSE 2 3/16 ID CP 3/4FORB QD FLATFACE AD 9/16MJIC 3/4MORB CYL 3X8 TRUN CP 1 1/16FORB QD BRKT FRWD STR VLV BLK HHCS 1/4-20X6 GR5 PLT WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT HHCS 3/4-10X3 GR5 HH1/4R /16FORB 9/16MORB EL 9/16MJIC 9/16MORB AD 9/16MORB STRAIGHT UNION AD 9/16MORB 9/16MJIC VALVE LOAD SHUTTLE 9/16MORB Refer to "Hydraulic Cylinder C (3 x 8 x 1.5 Rod)" for breakdown Refer to Steering Control Valve ( ) for breakdown Refer to "Hydraulic Cylinder C (3 x 8 x 1.5 Rod)" for breakdown (Option) Used when sharing Load Sense Line with another application (Option) Used when sharing Load Sense Line with another application (Option) Used when sharing Load Sense Line with another application 01/04/ P

150 Table of Contents Part Number Index Fan And Steering Hydraulics (S/N B1027J - B1108J) P /04/18

151 Table of Contents Part Number Index Hydraulics Fan And Steering Hydraulics (S/N B1027J - B1108J) Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C C C C C C C C C C C C C C C C C C C C D C C C C C C C C C C C C C C C C C C C C C C C Image No. HYD MOTOR PARKER 330C 0.99CIR AD 1 1/16MORB 3/4FORB AD 3/4MORB 3/4FJIC AD 3/4MORB 7/8MJIC CP 9/16 FORB QD 1/4 BODY TE 3/4MJIC 3/4MORB 3/4MJIC TE 3/4MORB 3/4MJIC 3/4MJIC VALVE LINE CHECK EL 3/4MJIC 3/4MORB EL 45 7/16MORB 9/16MJIC CYL 3X15 TRUN W/SENSOR AD 3/4MORB 3/4MJIC EL 3/4MORB X 7/8MJIC TE 3/4MJIC 3/4MORB 3/4MJIC TE 9/16MJIC 9/16MJIC 9/16MORB HH1/2R /4MORB 3/4FJIC90 HH1/4R /16FJIC HH1/2R /4FJIC NUT LOCK 7/8-14 BULKHEAD TE 7/8MJIC BULKHEAD HH1/4R /16FJIC HH1/2R /4FJIC 3/4MORB HH1/4R /16FJIC CP 3/4FORB MALE QD POPPET TYPE VALVE MANIFOLD FORWARD STEERIN WRAP HOSE 2 3/16 ID CP 3/4FORB QD FLATFACE AD 9/16MJIC 3/4MORB CYL 3X15 TRUN CP 1 1/16FORB QD BRKT FRWD STR VLV BLK HHCS 1/4-20X6 GR5 PLT WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT HHCS 3/4-10X3 GR5 HH1/4R /16FORB 9/16MORB EL 9/16MJIC 9/16MORB AD 9/16MORB STRAIGHT UNION AD 9/16MORB 9/16MJIC VALVE LOAD SHUTTLE 9/16MORB NUT LOCK 3/4-16 BULKHEAD TE 3/4MJIC BULKHEAD HH1/2R /8FJIC HH1/2R /4FJIC HH1/2R /8FJIC HH1/2R /8FJIC HH1/2R /4FJIC HH1/2R /4FJIC HH1/2R /4FJIC HH1/2R /4FJIC HH1/2R /8FJIC HH1/2R /8FJIC Refer to "Hydraulic Cylinder C (3 x 15 x 1.25 Rod)" for breakdown. Refer to Steering Control Valve ( ) for breakdown Refer to "Hydraulic Cylinder C (3 x 15 x 1.25 Rod)" for breakdown. Used on 36", 38" & 40" spacing Used on 30" spacing Used on 36", 38" & 40" spacing Used on 30" spacing Used on 36", 38" & 40" spacing Used on 30" spacing Used on 36", 38" & 40" spacing Used on 30" spacing 01/04/ P

152 Table of Contents Part Number Index Fan And Steering Hydraulics (S/N B1027J - B1108J) (continued) Ref Part No C C C C C Part Description AD 3/4MORB 7/8MJIC HOSE CLIP 13/16 ID HHCS 5/16-18X1 1/4 GR5 WASHER FLAT 5/16 USS PLT NUT HEX 5/16-18 PLT Comments Revision P /04/18

153 Table of Contents Part Number Index Hydraulics Fan And Steering Hydraulics (S/N B1027J - B1108J) (continued) This Page Intentionally Left Blank 01/04/ P

154 Table of Contents Part Number Index Fan and Steering Hydraulics (S/N B1109J+) P /04/18

155 Table of Contents Part Number Index Hydraulics Fan and Steering Hydraulics (S/N B1109J+) Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C C C C C C C C C C C C C C C C C C C C D C C C C C C C C C C C C C C C C C C C C C Image No. HYD MTR HYDROLEDUC MA18 1.1CIR AD 1 1/16MORB 3/4FORB AD 3/4MORB 3/4FJIC AD 3/4MORB 7/8MJIC CP 9/16 FORB QD 1/4 BODY NUT HEX 5/16-18 PLT TE 3/4MJIC 7/8MORB 3/4MJIC VALVE LINE CHECK EL 3/4MJIC 3/4MORB EL 45 9/16MORB 3/4MJIC CYL 3X15 TRUN W/SENSOR AD 3/4MORB 3/4MJIC EL 3/4MORB X 7/8MJIC TE 3/4MJIC 3/4MORB 3/4MJIC TE 9/16MJIC 9/16MJIC 9/16MORB HH1/2R /4MORB 3/4FJIC90 HH1/2R /4MORB 3/4FJIC HH1/2R /4FJIC 3/4MORB NUT LOCK 7/8-14 BULKHEAD TE 7/8MJIC BULKHEAD HH3/8R /4FJIC HH1/2R /4FJIC 3/4MORB HH1/4R /16FJIC CP 3/4FORB MALE QD POPPET TYPE VALVE MANIFOLD FORWARD STEERIN WRAP HOSE 2 3/16 ID CP 3/4FORB QD FLATFACE AD 9/16MJIC 3/4MORB CYL 3X15 TRUN CP 1 1/16FORB QD BRKT FRWD STR VLV BLK HHCS 1/4-20X6 GR5 PLT WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT HHCS 3/4-10X3 GR5 HH1/4R /16FORB 9/16MORB EL 9/16MJIC 9/16MORB AD 9/16MORB STRAIGHT UNION AD 9/16MORB 9/16MJIC VALVE LOAD SHUTTLE 9/16MORB NUT LOCK 3/4-16 BULKHEAD TE 3/4MJIC BULKHEAD HH1/2R /8FJIC HH1/2R /4FJIC HH1/2R /8FJIC HH1/2R /8FJIC HH1/2R /8FJIC HH1/2R /4FJIC HH1/2R /4FJIC HH1/2R /4FJIC Refer to Steering Control Valve ( ) for breakdown Used on single caster 36", 38" & 40" spacing. Used on single caster 30" & dual caster 36", 38" & 40" spacing. Used on dual caster 30" spacing. Used on single caster 36", 38" & 40" spacing. Used on single caster 30" & dual caster 36", 38" & 40" spacing. Used on dual caster 30" spacing. 01/04/ P

156 Table of Contents Part Number Index Fan and Steering Hydraulics (S/N B1109J+) (continued) Ref Part No C C C C C C C C C C Part Description HH1/2R /4FJIC HH1/2R /4FJIC HH1/2R /4FJIC HH1/2R /8FJIC HH1/2R /8FJIC HH1/2R /8FJIC AD 3/4MORB 7/8MJIC HOSE CLIP 13/16 ID HHCS 5/16-18X1 1/4 GR5 WASHER FLAT 5/16 USS PLT Comments Used on single caster 36", 38" & 40" spacing Used on single caster 30" & dual caster 36", 38" & 40" spacing. Used on dual caster 30" spacing. Used on single caster 36", 38" & 40" spacing. Used on single caster 30" & dual caster 36", 38" & 40" spacing. Used on dual caster 30" spacing. Revision P /04/18

157 Table of Contents Part Number Index Hydraulics Fan and Steering Hydraulics (S/N B1109J+) (continued) This Page Intentionally Left Blank 01/04/ P

158 Table of Contents Part Number Index Lift Hydraulics (For planters w/locked wings only) P /04/18

159 Table of Contents Part Number Index Hydraulics Lift Hydraulics (For planters w/locked wings only) Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C Image No. CP 3/4FORB MALE QD POPPET TYPE HH3/8R /4MORB 3/4FJIC TE 3/4MJIC HH3/8R /4FJIC HH3/8R /4FJIC 3/4FJIC CYL 2X13X1.125 ROD (TIE) EL 3/4MJIC 9/16MORB HH3/8R /4FJIC WRAP HOSE 2 3/16 ID HH3/8R /4FJIC Refer to Hydraulic Cylinder C (2 x 13 x Rod) for breakdown 01/04/ P

160 Table of Contents Lift with Flex Wing Hydraulics Part Number Index P /04/18

161 Table of Contents Part Number Index Hydraulics Lift with Flex Wing Hydraulics Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C D C C C C C C C C C C C C C C C C C C C C Image No. CP 3/4FORB MALE QD POPPET TYPE HH3/8R /4MORB 9/16FJIC CYL 4 X 4 X 1.25 TE 9/16MJIC 3/4MORB 9/16MJIC EL 3/4MJIC 3/4MORB EL 9/16MJIC 9/16FJIC HH3/8R /16FJIC HH3/8R /16FJIC HH3/8R /16FJIC HH3/8R /4MORB 9/16FJIC STRAP VALVE HOLD DOWN NUT HEX 5/16-18 PLT WASHER FLAT 5/16 HARD ASTMF436 EL 9/16MJIC 9/16MORB AD 9/16MJIC 3/4MORB EL 3/4MORB 9/16MJIC VALVE PO CHECK ORB PORTS HHCS 5/16-18X2 3/4 GR5 HH3/8R /4FJIC 3/4FJIC HH3/8R /4FJIC AD 3/4MJIC 3/8MNPT ONE-WAY RESTRICTOR VALVE AD 3/4FJIC 3/8MNPT TE 3/4MJIC CYL 2X13X1.125 ROD (TIE) HH3/8R2 60 9/16FJIC 3/4FJIC EL 3/4MJIC 9/16MORB TE 9/16MJIC 9/16MJIC 9/16FJIC HH3/8R /4FJIC HH3/8R /4FJIC WRAP HOSE 2 3/16 ID Refer to "Hydraulic Cylinder C (4 x 4 x 1.25 Rod)" for breakdown. Refer to "Pilot Operated Check Valve ( C)" for breakdown. Refer to Hydraulic Cylinder C (2 x 13 x Rod) for breakdown 01/04/ P

162 Table of Contents Wing Fold And Marker Hydraulics Part Number Index P /04/18

163 Table of Contents Part Number Index Hydraulics Wing Fold And Marker Hydraulics Ref. Part No. Part Description Comments Revision dwg C C C C C C C D C C C C C C C C C C C C C C C C C C C Image No. VALVE 3 WAY MULTIPLIER EL 3/4MORB 9/16MJIC EL 9/16MJIC 9/16FJIC TE 9/16MJIC 3/4MORB 9/16MJIC VALVE,SEQ SHOEMAKER HI FLO EL 9/16MJIC 9/16MORB TE 9/16MJIC ORIFICE PLATE 1/16 3/4 ORPL 1/16 9/16MORB CYL 3X8X1 1/4 ROD CYL 3X24X1.50 ROD (TIE ROD) CYL 5X29.5X1.5 ROD HH3/8R /4MORB 9/16FJIC HH1/4R /16FJIC HH1/4R /16FJIC HH1/4R /16FJIC HH1/4R /16FJIC HH1/4R /16FJIC HH1/4R /16FJIC HH1/4R /16FJIC HH1/4R /16FJIC HH1/4R /16FJIC HH1/4R /16FJIC HH1/4R /16FJIC HH1/4R /16FJIC CP 3/4FORB MALE QD POPPET TYPE WRAP HOSE 2 3/16 ID Refer to "Fasse 3 Way Multiplier ( C)" for breakdown Refer to "Sequence Valve ( C)" for breakdown. Refer to "Hydraulic Cylinder C (3 x 8 x 1.25 Rod)" for breakdown. Refer to "Hydraulic Cylinder C (3 x 24 x 1.50 Rod)" for breakdown. Refer to "Hydraulic Cylinder C (5 x 29.5 x 1.50 Rod)" for breakdown. 01/04/ P

164 Table of Contents Part Number Index Wing Fold Hydraulics (For planters w/o markers only) P /04/18

165 Table of Contents Part Number Index Hydraulics Wing Fold Hydraulics (For planters w/o markers only) Ref. Part No. Part Description Comments Revision dwg C C C C C D C C C Image No. HH1/4R /16FJIC HH1/4R /16FJIC HH3/8R /4MORB 9/16FJIC TE 9/16MJIC EL 3/4MORB 9/16MJIC ORIFICE PLATE 1/16 3/4 CYL 5X29.5X1.5 ROD CP 3/4FORB MALE QD POPPET TYPE WRAP HOSE 2 3/16 ID Refer to "Hydraulic Cylinder C (5 x 29.5 x 1.50 Rod)" for breakdown. 01/04/ P

166 Table of Contents Hydraulic Hose Grips Part Number Index P /04/18

167 Table of Contents Part Number Index Hydraulics Hydraulic Hose Grips Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C C C C Image No. HG HANDLE - BLACK EXT HG HANDLE - RED EXT HG HANDLE - GREEN EXT HG HANDLE - YELLOW EXT HG HANDLE - GRAY EXT HG HANDLE - BLUE EXT HG HANDLE - BLACK RET HG HANDLE - RED RET HG HANDLE - GREEN RET HG HANDLE - YELLOW RET HG HANDLE - GRAY RET HG HANDLE - BLUE RET AD 3/4MORB 3/4FORB (HG) Used on frame lift cylinders. Used on hydraulic level Used on wing fold cylinders Used on Hydraulic Drive. Used on fold cylinders. Used on cast roller depth control. Used on frame lift cylinders. Used on hydraulic level. Used on wing fold cylinders. Used on Hydraulic Drive. Used on fold cylinders. Used on cast roller depth control 01/04/ P

168 Table of Contents Fasse 3 Way Multiplier ( C) Part Number Index P /04/18

169 Table of Contents Part Number Index Hydraulics Fasse 3 Way Multiplier ( C) Ref. Part No. Part Description Comments Revision dwg C Image No. COIL DW FASSE CART SV N-00 FASSE BLOCK M A 1513/SP FASSE DECL GOLD/BLK 3 X FASSE DECL S/N (SILVER) FASSE DECL GOLD/BLK 1.5 X.5 VALVE 3 WAY MULTIPLIER 01/04/ P

170 Table of Contents Part Number Index Hydraulic Cylinder C (5 x 29.5 x 1.50) P /04/18

171 Table of Contents Part Number Index Hydraulics Hydraulic Cylinder C (5 x 29.5 x 1.50) Ref. Part No. Part Description Comments Revision dwg M1028-ADI 2S8598 3R9512 4M8108 5M8198 6R9172-ADI 7M8398 2A C C C C Image No. MW CLEVIS MW ROD MIDWAY HEAD MW PISTON MW TUBE MIDWAY ADI BASE MW TIE ROD PIN CLEVIS MW WIPER U-CUP O-RING MIDWAY BACK-UP MIDWAY CROWN SEAL MIDWAY MW PISTON NUT SEAL MW PISTON NUT 1 1/4'"-12 UNF NUT HEX 3/4-16 PLAIN NUT HEX 3/8-16 PLAIN HHCS 3/8-16X1 3/4 GR5 COTTER PIN SEAL KIT MW 5 X 1 1/2'" 5A8104 Only available in item #20 Only available in item #20 Only available in item #20 Only available in item #20 Only available in item #20 Only available in item #20 01/04/ P

172 Table of Contents Part Number Index Hydraulic Cylinder C (3 x 13 x 1.25 Rod) P /04/18

173 Table of Contents Part Number Index Hydraulics Hydraulic Cylinder C (3 x 13 x 1.25 Rod) Ref. Part No. Part Description Comments Revision dwg M7016 2X4410 3R1412 4R1108 5R1121 6R1167 7M4321 2A0024 2A0014 2A C C 2A0134 2A C Image No. CLEVIS ROD MIDWAY MIDWAY ROD MW HEAD 3X1-1/4 ROD PT.E PISTON MIDWAY MIDWAY TUBE MIDWAY BASE MIDWAY TIE ROD MW WIPER U-CUP O-RING MIDWAY BACK-UP MIDWAY TEFLON SEAL O-RING LOADER MIDWAY WEAR RING MIDWAY MW PISTON NUT SEAL MW PISTON NUT 1-14 MW TIE ROD NUT RPBY C HHCS 3/8-16X1 3/4 GR5 PIN CLEVIS 1 X 3 11/16 GR5 PLT MW COTTER PIN MW PLUG SEAL KIT MW 3 RPHCYL 4A1104 Only available in item #23 Only available in item #23 Only available in item #23 Only available in item #23 Only available in item #23 Only available in item #23 Only available in item #23 Only available in item #23 01/04/ P

174 Table of Contents Part Number Index Hydraulic Cylinder C (3.25 x 13 x 1.25 Rod) P /04/18

175 Table of Contents Part Number Index Hydraulics Hydraulic Cylinder C (3.25 x 13 x 1.25 Rod) Ref. Part No. Part Description Comments Revision dwg M7016 2M5498 3R2412 4R2108 5R2121 6R2167 7M5321 2A0024 2A0016 2A C C 2A0134 2A C Image No. CLEVIS ROD MIDWAY MIDWAY ROD MW HEAD PISTON MIDWAY MIDWAY TUBE MIDWAY BASE MIDWAY TIE ROD MW WIPER U-CUP O-RING MIDWAY BACK-UP MIDWAY TEFLON SEAL O-RING LOADER MIDWAY WEAR RING MIDWAY MW PISTON NUT SEAL MW PISTON NUT 1-14 MW TIE ROD NUT RPBY C HHCS 3/8-16X1 3/4 GR5 PIN CLEVIS 1 X 3 11/16 GR5 PLT MW COTTER PIN MW PLUG SEAL KIT MW 3.25 RPHCYL 4A2104 Only available in item #23 Only available in item #23 Only available in item #23 Only available in item #23 Only available in item #23 Only available in item #23 Only available in item #23 Only available in item #23 01/04/ P

176 Table of Contents Part Number Index Hydraulic Cylinder C (3 x 24 x 1.5 Rod) P /04/18

177 Table of Contents Part Number Index Hydraulics Hydraulic Cylinder C (3 x 24 x 1.5 Rod) Ref. Part No. Part Description Comments Revision dwg M7016-ADI 2M4532NC 3R1512 4M4108 5M4132 6R1164-ADI 7M C 2A0024 2A0014 2A C 2A C Image No. MIDWAY HARDENED CLEVIS ADI MW NICKEL/CHROME ROD MIDWAY HEAD MW PISTON MW TUBE MIDWAY ADI BASE TIE ROD PIN CLEVIS 1 X 3 11/16 GR5 PLT MW WIPER U-CUP O-RING MIDWAY BACK-UP MIDWAY TEFLON SEAL MW PISTON NUT SEAL MW PISTON NUT 1-14 MW TIE ROD NUT RPBY C HHCS 3/8-16X1 3/4 GR5 MW COTTER PIN SEAL KIT MW 3 CYL 5A4106 Only available in item #20 Only available in item #20 Only available in item #20 Only available in item #20 Only available in item #20 Only available in item #20 01/04/ P

178 Table of Contents Part Number Index Hydraulic Cylinder (3 x 8 x 1.25 Rod) P /04/18

179 Table of Contents Part Number Index Hydraulics Hydraulic Cylinder (3 x 8 x 1.25 Rod) Ref. Part No. Part Description Comments Revision dwg M7016-ADI 2M4414NC 3R1410 4M4108 5M4116 6R1148-ADI 7M C 2A0024 2A0014 2A C 2A0134 2A C Image No. MIDWAY HARDENED CLEVIS ADI MW NICKEL/CHROME ROD MW HEAD MW PISTON MW TUBE 3 X 8 CYLINDER MIDWAY ADI BASE MW TIE ROD 3 X 8 CYLINDER PIN CLEVIS 1 X 3 11/16 GR5 PLT MW WIPER U-CUP O-RING MIDWAY BACK-UP MIDWAY CROWN SEAL MIDWAY MW PISTON NUT SEAL MW PISTON NUT 1-14 MW TIE ROD NUT RPBY C HHCS 3/8-16X1 3/4 GR5 MW COTTER PIN MW PLUG CYL SEAL KIT MW (5A4104) 3 X 7 Only available in item #21 Only available in item #21 Only available in item #21 Only available in item #21 Only available in item #21 Only available in item #21 01/04/ P

180 Table of Contents Part Number Index Hydraulic Cylinder C (4 x 4 x 1.25 Rod) P /04/18

181 Table of Contents Part Number Index Hydraulics Hydraulic Cylinder C (4 x 4 x 1.25 Rod) Ref. Part No. Part Description Comments Revision dwg M7016 2M6409 3R5712 4M6108 5M6112 6R5170 7M C 2A0024 2A0018 2A C 2A C Image No. CLEVIS ROD MIDWAY MIDWAY ROD MW HEAD MW PISTON MIDWAY TUBE MW BASE MIDWAY TIE ROD PIN CLEVIS 1 X 3 11/16 GR5 PLT MW WIPER U-CUP O-RING MIDWAY BACK-UP MIDWAY CROWN SEAL MIDWAY MW PISTON NUT SEAL MW PISTON NUT 1-14 MW TIE ROD NUT RPBY C HHCS 3/8-16X1 3/4 GR5 MW COTTER PIN CYL SEAL KIT 4 X 14 MW 5A6102 Only available in item #20 Only available in item #20 Only available in item #20 Only available in item #20 Only available in item #20 Only available in item #20 01/04/ P

182 Table of Contents Part Number Index Hydraulic Cylinder C (2 x 13 x Rod) P /04/18

183 Table of Contents Part Number Index Hydraulics Hydraulic Cylinder C (2 x 13 x Rod) Ref. Part No. Part Description Comments Revision dwg M6006 2M2319 3R0122 4M2108 5M2121 6R0032 7M C C C C 2A C Image No. MW ROD CLEVIS MIDWAY ROD MW HEAD MW PISTON MIDWAY TUBE BASE MIDWAY MIDWAY TIE ROD PIN CLEVIS 1 X 3 11/16 GR5 PLT ROD WIPER U-CUP O-RING BACK UP CROWN SEAL O-RING NUT LOCK 3/4-16 NYLOC COLLAR NUT HEX 3/8-16 PLAIN HHCS 3/8-16X1 3/4 GR5 MW COTTER PIN SEAL KIT MW 5A2104 Only available in item #19 Only available in item #19 Only available in item #19 Only available in item #19 Only available in item #19 Only available in item #19 01/04/ P

184 Table of Contents Part Number Index Hydraulic Cylinder C (3 x 8 x 1.5 Rod) P /04/18

185 Table of Contents Part Number Index Hydraulics Hydraulic Cylinder C (3 x 8 x 1.5 Rod) Ref. Part No. Part Description Comments Revision dwg C C Image No. PRINCE PISTON ROD ASSY PRINCE BUTT AND TUBE ASSY PRINCE PISTON PRINCE GLAND SENSOR LIN 8" PWM PRINCE DX BUSHING PRINCE LOCKNUT 0-RING 0-RING 0-RING BEARING RING U-CUP CROWN SEAL BU-WASHER WIPER SEAL KIT FOR C & -635C Only available in item #16 Only available in item #16 Only available in item #16 Only available in item #16 Only available in item #16 Only available in item #16 Only available in item #16 Only available in item #16 01/04/ P

186 Table of Contents Part Number Index Hydraulic Cylinder C (3 x 8 x 1.5 Rod) P /04/18

187 Table of Contents Part Number Index Hydraulics Hydraulic Cylinder C (3 x 8 x 1.5 Rod) Ref. Part No. Part Description Comments Revision dwg C Image No. PRINCE PISTON ROD ASSY PRINCE BUTT & TUBE ASSY PRINCE PISTON PRINCE GLAND PRINCE DX BUSHING PRINCE LOCKNUT 0-RING 0-RING 0-RING BEARING RING U-CUP CROWN SEAL BU-WASHER WIPER SEAL KIT FOR C & -635C Only available in item #15 Only available in item #15 Only available in item #15 Only available in item #15 Only available in item #15 Only available in item #15 Only available in item #15 Only available in item #15 01/04/ P

188 Table of Contents Part Number Index Hydraulic Cylinder C (3 x 15 x 1.5 Rod) P /04/18

189 Table of Contents Part Number Index Hydraulics Hydraulic Cylinder C (3 x 15 x 1.5 Rod) Ref. Part No. Part Description Comments Revision dwg C C Image No. PRINCE PISTON ROD PRINCE BUTT & TUBE ASSY PRINCE PISTON PRINCE GLAND PRINCE LOCKNUT PRINCE JAM NUT PRINCE SPHERICAL ROD END PRINCE DX BUSHING O-RING O-RING O-RING BU-WASHER BEARING RING CROWN SEAL U-CUP WIPER SEAL KIT ENERGY 3.0 REPHASE SENSOR LIN 16" PWM Only available in item #17 Only available in item #17 Only available in item #17 Only available in item #17 Only available in item #17 Only available in item #17 Only available in item #17 Only available in item #17 01/04/ P

190 Table of Contents Part Number Index Hydraulic Cylinder C (3 x 15 x 1.5 Rod) P /04/18

191 Table of Contents Part Number Index Hydraulics Hydraulic Cylinder C (3 x 15 x 1.5 Rod) Ref. Part No. Part Description Comments Revision dwg C Image No. PRINCE PISTON ROD PRINCE BUTT & TUBE ASSEMBLY PRINCE PISTON PRINCE GLAND PRINCE LOCKNUT PRINCE JAM NUT PRINCE SPHERICAL ROD END PRINCE DX BUSHING O-RING O-RING O-RING BU-WASHER BEARING RING CROWN SEAL U-CUP WIPER SEAL KIT ENERGY 3.0 REPHASE Only available in item #17 Only available in item #17 Only available in item #17 Only available in item #17 Only available in item #17 Only available in item #17 Only available in item #17 Only available in item #17 01/04/ P

192 Table of Contents Pilot Operated Check Valve ( C) Part Number Index P /04/18

193 Table of Contents Part Number Index Hydraulics Pilot Operated Check Valve ( C) Ref. Part No. Part Description Comments Revision dwg10036 Image No MW VALVE BODY 1151 SHMKR CARTRIDGE CKCD-XCN PCPIL SHOEMAKER CARTRIDGE, PILOT CHK 01/04/ P

194 Table of Contents Pressure Reducing Valve ( C) Part Number Index P /04/18

195 Table of Contents Part Number Index Hydraulics Pressure Reducing Valve ( C) Ref. Part No. Part Description Comments Revision dwg18804 PRPIL-10-K C CP C Image No. CARTRIDGE PRESS RED SHOEMAKER RPBY C DELTA CARTRIDGE ONLY WITH KNOB SEAL KIT 7/8-14 DELTA REPLACED BY CP RPBY 5075 SEAL KIT 7/8-14 DELTA See chart for sizes Includes: 2 Each of the thin Back-Up Rings, sizes B, C, and D. 1 Each of the thick Back-Up Rings, sizes C and D. 2 Each of the thick Back-Up Rings size B. 1 Each of O-Rings sizes A, B, C, and D. 01/04/ P

196 Table of Contents Sequence Valve ( C) Part Number Index P /04/18

197 Table of Contents Part Number Index Hydraulics Sequence Valve ( C) Ref. Part No. Part Description Comments Revision dwg Image No. SHOEMAKER BODY MKR SEQ VALVE SHOEMAKER O-RING SHOEMAKER PLUG, HEX SOCKET SHOEMAKER NEEDLE,FLOW CONTROL SHOEMAKER.125 SPRING PIN SHOEMAKER SPRING COMPRESSION RPBY RPBY SEAL KIT SHOEMAKER SCREW, FLOW CON.ADJ. SHOEMAKER HEX, JAM NUT Z PLTD. RPBY SEAL KIT RPBY SEAL KIT RPBY SEAL KIT RPBY SEAL KIT SHOEMAKER O-RING SHOEMAKER FITTING PORT ADPT. SHOEMAKER HEX,SKT O-RING PLUG SHOEMAKER O-RING RPBY SHOEMAKER SPOOL,MKR SEQ /04/ P

198 Table of Contents Steering Control Valve ( ) Part Number Index P /04/18

199 Table of Contents Part Number Index Hydraulics Steering Control Valve ( ) Ref. Part No. Part Description Comments Revision dwg Image No. FASSE COIL 12VDC W/PS CART H/F EHPR08 COIL 12V W/ DIODE CART SV-10 CART H/F EP10 CART H/F CR08 CART H/F FR08 MANIFOLD BLK STEERING CONTROL CART CV08 CHECK VALVE FASSE DECAL BLK/GLD 1X.75 FASSE DECL S/N (SILVER) CART H/F CV10 CART H/F PE12 01/04/ P

200 Decals Table of Contents Part Number Index P /04/18