Parts Manual. 3-S No-Till Drill 3N-3010 & 3N Copyright 2018 Printed 09/24/ P

Transcription

1 Table of Contents Part Number Index Parts Manual 3N-3010 & 3N S No-Till Drill Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! Cover illustration may show optional equipment not supplied with standard unit. Copyright 2018 Printed 09/24/ P

2 Table of Contents Table of Contents Part Number Index Section 1: Introduction...4 Using This Manual...4 Manual Replacement Information...4 Manual Revisions...4 Touch-up Paint...4 Hardware Legend...5 Replacement Hardware...5 Serial Numbers...5 Part Number Service Coding...5 Tongue...6 Hitch To Tongue...6 Transport Latch...8 Tongue To Center Frame...10 Rockshaft And Gauge Wheel...12 Rockshaft...12 Rockshaft To Frame...14 Gauge Wheels...16 Box And Box Frames...18 Wing To Center...18 Box To Center Frame...20 Box To Wing Frames...22 Box Components...24 LED Lights (S/N 1045UU+)...26 Walkboards And Steps...28 Metering System...30 Feeder Cup Tray (7.5" LH)...30 Feeder Cup Tray (7.5" RH)...32 Feeder Cup Tray (10" LH)...34 Feeder Cup Tray (10" RH)...36 Loup Shaft Monitor (2 Channel A) (3 Channel A)...38 Seed Rate Adjustment Handle Assembly...40 Drive...42 Contact Drive Wheel...42 Transmission Drive...46 Wing Drive...48 Ratchet Clutch CW (RH Side) ( S)...50 Ratchet Clutch CCW (LH Side) ( S)...52 Openers Series Opener Arms & Mounts Series Opener Body Series Opener Arms & Mounts Series Opener Body...60 Keeton Seed Firmer (Option)...62 Air Design Scraper (Option)...64 Side Wheel Scraper (Option) & 20 Series Seed-Lok (Option)...68 Coulters...70 Grease Bank...72 Coulter Tine (Option)...74 Press Wheels " x 13" Single Press Wheel " x 13" Single Press Wheel " x 12" Double "V" Press Wheel /4" x 13 1/2" Double Press Wheel " x 12 1/2" Double Press Wheel (Part 1) " x 12" Double "V" Press Wheel Short " x 12" Double "V" Press Wheel Long " x 10" Double "V" Press Wheel /4" x 13" Double Press Wheel " x 12 1/2" Double Press Wheel (Part 2)...94 Hydraulics...96 Hydraulics...96 Depth Stop...98 Stroke Control Valve ( C) Hydraulic Cylinder ( C) Hydraulic Cylinder ( C) (S/N 1021UU-) Hydraulic Cylinder ( C) (S/N 1022UU+) Hydraulic Cylinder ( C) (S/N 1021UU-) Hydraulic Cylinder ( C) (S/N 1022UU+) Point Row Point Row Clutch Point Row Clutch Harness & Switch Height Switch Cam Decals Decal Placement Options Flat Fold Marker Marker Disk And Bearings Single Marker Hydraulics Dual Marker Hydraulics Marker Sequence Valve ( C) Harrow Part Number Index Copyright 2018 All rights reserved Printed 09/24/18 Great Plains Manufacturing, Inc. provides this publication as is without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. Great Plains Manufacturing, Incorporated Trademarks The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains All other brands and product names are trademarks or registered trademarks of their respective holders. Printed in the United States of America P /24/18

3 Table of Contents Part Number Index Alphabetized Table of Contents Selected Models 1 1 1/4" x 13 1/2" Double Press Wheel /4" x 13" Double Press Wheel " x 10" Double "V" Press Wheel " x 12" Double "V" Press Wheel " x 12" Double "V" Press Wheel Long " x 12" Double "V" Press Wheel Short & 20 Series Seed-Lok (Option) Series Opener Arms & Mounts Series Opener Body " x 12 1/2" Double Press Wheel (Part 1) " x 12 1/2" Double Press Wheel (Part 2) " x 13" Single Press Wheel Series Opener Arms & Mounts Series Opener Body " x 13" Single Press Wheel...78 A Air Design Scraper (Option)...64 B Box Components...24 Box To Center Frame...20 Box To Wing Frames...22 C Contact Drive Wheel...42 Coulter Tine (Option)...74 Coulters...70 D Decal Placement Depth Stop...98 Dual Marker Hydraulics F Feeder Cup Tray (10" LH)...34 Feeder Cup Tray (10" RH)...36 Feeder Cup Tray (7.5" LH)...30 Feeder Cup Tray (7.5" RH)...32 Flat Fold Marker Hydraulic Cylinder ( C) (S/N 1021UU-) Hydraulic Cylinder ( C) (S/N 1022UU+) Hydraulic Cylinder ( C) (S/N 1021UU-) Hydraulic Cylinder ( C) Hydraulic Cylinder ( C) (S/N 1022UU+) Hydraulics...96 K Keeton Seed Firmer (Option)...62 L LED Lights (S/N 1045UU+)...26 Loup Shaft Monitor (2 Channel A) (3 Channel A)...38 M Marker Disk And Bearings Marker Sequence Valve ( C) P Point Row Clutch Point Row Clutch Harness & Switch R Ratchet Clutch CCW (LH Side) ( S)...52 Ratchet Clutch CW (RH Side) ( S)...50 Rockshaft...12 Rockshaft To Frame...14 S Seed Rate Adjustment Handle Assembly...40 Side Wheel Scraper (Option)...66 Single Marker Hydraulics Stroke Control Valve ( C) T Tongue To Center Frame...10 Transmission Drive...46 Transport Latch...8 W Walkboards And Steps...28 Wing Drive...48 Wing To Center...18 G Gauge Wheels...16 Grease Bank...72 H Harrow Height Switch Cam Hitch To Tongue /24/ P

4 Table of Contents P Part Number Index -4-09/24/18

5 Table of Contents Part Number Index 09/24/ P

6 Hitch To Tongue Table of Contents Part Number Index P /24/18

7 Hitch To Tongue Table of Contents Part Number Index Tongue Ref. Part No. Part Description Comments Revision dwg H C C C D C H H H C C C C C C C C C D D Image No. PSS 30NT TONGUE WLDMNT SQ TB JACK LB 10 STROKE HHCS 1 1/4-7X11 GR5 SPTHD HHCS 1 1/4-7X9 1/2 GR5 SPTHD SAFETY CHAIN WASHER SAFETY CHAIN LB SINGLE HITCH STRAP-LARGE CLEVIS HITCH WELDMENT SINGLE HITCH STRAP-SMALL NUT HEX 1 1/4-7 PLT WASHER LOCK 1 1/4 SPRING PLT WASHER FLAT 1/2 USS PLT WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT HHCS 1/2-13X1 3/4 GR5 SPRING HOSE LOOP HEAVY HHCS 5/16-18X2 1/4 GR5 WASHER LOCK SPRING 5/16 PLT RPBY D 1/4 MARKER HYD HOSE GUARD 09/24/ P

8 Transport Latch Table of Contents Part Number Index P /24/18

9 Transport Latch Table of Contents Part Number Index Tongue Ref. Part No. Part Description Comments Revision dwg C C C C C C C C D D D C C D C C C C C C H Image No. NUT HEX NYLOCK 1/2-13 NUT-HEX 1/4-20 PLT WASHER LOCK SPRING 1/4 PLT SPRING DIE 1OD X 1/2ID X 1 3/4 WASHER FLAT 1/2 USS PLT HHCS 1/2-13X2 3/4 GR5 HHCS 1/4-20X1 GR5 PIN ROLL 5/16 X 1 1/2 PLT LATCH ROD SUPPORT BAR LATCH RELEASE EXTENSION ROD LATCH RELEASE HANDLE HHCS 1/2-13X3 1/2 GR5 SPRING COMP.906OD X 9 X.105W TRANSPORT LATCH HHCS 3/4-10X2 1/4 GR5 NUT HEX 3/4-10 PLT NYLOCK WASHER FLAT 3/4 USS PLT NUT LOCK 1/2-13 PLT WASHER FLAT 5/8 SAE PLT PIN ROLL 3/16 X 1 PLT LATCH RELEASE BRACKET 09/24/ P

10 Table of Contents Tongue To Center Frame Part Number Index P /24/18

11 Table of Contents Part Number Index Tongue Tongue To Center Frame Ref. Part No. Part Description Comments Revision dwg C C C C D D Image No. HHCS 1-8X10 GR5 PLT WASHER FLAT 1 USS PLT WASHER LOCK SPRING 1 PLT NUT HEX 1-8 PLT SHIM, TONGUE-FRAME SHORT SHIM, TONGUE-FRAME LONG 09/24/ P

12 Rockshaft Table of Contents Part Number Index P /24/18

13 Rockshaft Table of Contents Part Number Index Rockshaft And Gauge Wheel Ref. Part No. Part Description Comments Revision dwg H D C C C C C C C C C C C C C D C C D C C P K C C C C C C C C K K Image No. 30NT ROCKSHAFT WELDMENT ROCKSHAFT LIFT CYLINDER LUG HHCS 3/4-10X5 GR5 NUT HEX 3/4-10 PLT NYLOCK WASHER FLAT 1 1/4 SAE PLT PIN COTTER 1/4 X 2 1/2 PLT PIN CLEVIS 1 1/4 X 3 HUB & SPINDLE ASY 8 BOLT 5790# BUSHING CYL 1 1/4 X 1 X 1 SPINDLE SGL 2.73X BOLT HUB SEAL BRG CONE 2.00IDX1.18WD #3780 HUB ASSY 8 BOLT 5790# PAINTED BRG CUP 3.67ODX.93WD #3720 HUB STUD 5/8-18X2 1/2 GR5 8-BOLT WHEEL HUB MACH. BRG CUP 3.00ODX.75WD #2720 BRG CONE 1.31IDX1.01WD #2790 7/8 SPINDLE WASHER, HARDENED PIN COTTER 3/16 X 1 1/4 PLT NUT HEX SLOTTED 7/8-14 PLT REPLACED BY C TITAN 12.5L PLY 8 BOLT VALVE STEM TR415X.625X1 1/4 LG WHEEL 15 X 10 X 8 BOLT TIRE TITAN 12.5L PLY NUT LUG 5/8-18 X 90 DEG PLT BUSHING 1 1/2 X 1 1/4 X 1 1/2 RIM 16.5X12, 8 BLT 6 PILT 8 BC VALVE STEM METAL TR-575 TUBLES TIRE SKID ST 395/55B16.5 NHS RH TIRE/RIM 395/55B16.5 SKID 8 LH TIRE/RIM 395/55B16.5 SKID 8 Option Option Option Option Option 09/24/ P

14 Table of Contents Rockshaft To Frame Part Number Index P /24/18

15 Table of Contents Part Number Index Rockshaft And Gauge Wheel Rockshaft To Frame Ref. Part No. Part Description Comments Revision dwg K C C H C C C C C C H H H C Image No. PSS 30NT ROCKSHAFT AXLE ASSY CYL REP 4.75 X 12 X 1.50 ROD REPHASING CYL 4 3/4X12X2 ROD WING PIVOT PIN WELDMENT PIN ROLL 3/8 X 2 PLT PIN CLEVIS 1 X 3 11/16 GR5 PLT WASHER FLAT 1 SAE PIN COTTER 3/16 X 1 3/4 PLT PIN CLEVIS 1 X 3 5/16 HRD PLT PIN COTTER 3/16 X 1 3/4 PLT PSS 30NT CENTER FRAME WLDMT CYLINDER LOCK CHANNEL-1 1/2X12 2" TRANSPORT CYLINDER LOCK PIN 3/8 X 3 USABLE LW/PIN (S/N 1021UU-) (S/N 1022UU+) (S/N 1021UU-) (S/N 1022UU+) Formerly C 09/24/ P

16 Gauge Wheels Table of Contents Part Number Index P /24/18

17 Gauge Wheels Table of Contents Part Number Index Rockshaft And Gauge Wheel Ref. Part No. Part Description Comments Revision dwg H C C C C C C C C C C C C C C C D C C C C C C K C H C C C C H C C C C C C C C K K Image No. PSS 30NT GWL ARM WLDMNT BUSHING CYL 1 1/4 X 1 X 1 BUSHING SPINDLE 1 1/2X1 1/4X1 HHCS 1/2-13X3 1/4 GR5 NUT LOCK 1/2-13 PLT SPINDLE SGL 1.75X10.72 SEAL 2.56X1.625X.438 CR16289 BRG CONE 1.50ID LM BRG CUP LM HUB 6 BOLT 4 5/8 PILOT W/ CUPS BRG CUP LM HUB 6 BOLT 4 5/8 PILOT W/ CUPS BRG CONE 1.25ID LM WASHER SPINDLE - 7/8 PIN COTTER 5/32 X 1 3/4 LG NUT HEX SLOTTED 7/8-14 PLT HUB GREASE CAP HUB AND SPINDLE ASSY 6 BOLT HUB 6 BOLT 4 5/8 PILOT 3600 LB BOLT WHEEL 1/2-20X1 90-DEG TIRE TITAN 11L-15 X 8 PLY WHEEL 8 X 15 X 6 BOLT VALVE STEM TR415X.625X1 1/4 LG TITAN TIRE 11L-15 8 PLY 6 BLT GREASE ZERK STRAIGHT 1/4-28 WING PIVOT PIN WELDMENT PIN ROLL 3/8 X 2 PLT WASHER LOCK 1 1/4 SPRING PLT NUT HEX 1 1/4-7 PLT NUT HEX JAM 1 1/4-7 PLT NTA35 WING EYEBOLT WELDMENT CYL REP 4.5X12X1.5 ROD (TIE) CYL REP 4.25X12X1.5 ROD (TIE) PIN CLEVIS 1 X 3 5/16 HRD PLT WASHER FLAT 1 SAE PIN COTTER 3/16 X 1 3/4 PLT TIRE SKID ST 265/70B16.5 NHS RIM 16.5X8.25, 6 BLT 4.63 PILT VALVE STEM METAL TR-575 TUBLES RH TIRE/RIM 265/70B16.5 SKID 6 LH TIRE/RIM 265/70B16.5 SKID 6 Formerly D (S/N 1021UU-) (S/N 1022UU+) Option Option Option Option Option 09/24/ P

18 Wing To Center Table of Contents Part Number Index P /24/18

19 Wing To Center Table of Contents Part Number Index Box And Box Frames Ref. Part No. Part Description Comments Revision dwg H H C C H H C D C C H D C C C C D D C H C D C C C H C C C C C D H H H C C C H H C C C C D R R C C Image No. PSS 30NT LH WING FRAME WLDMT PSS 30NT RH WING FRAME WLDMT WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT PSS 30NT LH TOOLBAR WLDMT PSS 30NT RH TOOLBAR WLDMT GREASE ZERK STRAIGHT 1/4-28 TOOLBAR HORZ PIVOT PIN HHCS 3/4-10X5 1/2 GR5 NUT LOCK 3/4-10 PLT PIVOT PIN SUPPORT CAP WELDMENT BOX HINGE PIVOT WASHER NUT HEX SLOTTED 1 1/4-7 PIN COTTER 5/16 X 2 1/2 HHCS 3/4-10X2 3/4 GR5 BUSHING 3 X 2 1/2 X 2 CONNEX WASHER HARD 4 X 2.56 X.25 CYL PIN PIN COTTER 1/4 X 2 PLT OUTER FOLD LINK WELDMENT BUSHING 1 7/8X1 5/8X1 1/2 SPLT INNER SPACER TUBE WASHER FLAT 1 1/2 SAE PLT HHCS 1 1/4-7X3 1/2 GR5 PLT NUT HEX JAM 1 1/4-7 PLT INNER FOLD LUG WELDMENT PIN CLEVIS 1 X 4 11/16 GR 5 NUT HEX 1-8 NYLON INSERT PLT HHCS 1-8X8 1/2 GR5 CYL 4X16X2 ROD (TIE ROD) CYL 4X16X1.5 ROD (TIE ROD) VERTICAL PIVOT PIN PSS 30NT CENTER FRAME WLDMT HOSE GUIDE 30P WING LH HOSE GUIDE 30P WING RH HHCS 1/4-20X1 1/2 GR5 WASHER FLAT 1/4 USS PLT NUT HEX NYLOCK 1/4-20 HOSE GUIDE 30P CTR LH HOSE GUIDE 30P CTR RH HHCS 3/8-16X1 1/2 GR5 HHCS 3/8-16X1 GR5 WASHER LOCK SPRING 3/8 PLT WASHER FLAT 3/8 USS PLT HYD HOSE CLIP W/HOLES SPIRAL HOSE WRAP 2.00 DIA SPIRAL HOSE WRAP 1 ID PLASTIC CABLE TIE.31X21.5 6DIA 120LB NUT HEX 3/8-16 PLT Shown. Shown. S/N 1161AA+ S/N 1160AA- Shown. Shown. 2nd Rev. 1st Rev. 09/24/ P

20 Table of Contents Box To Center Frame Part Number Index P /24/18

21 Table of Contents Part Number Index Box And Box Frames Box To Center Frame Ref. Part No. Part Description Comments Revision dwg C C C C C D C C C C C D C H C C C C Image No. HHCS 1/2-13X1 1/4 GR5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT DUAL AG LIGHTS RH DUAL AG LIGHTS LH 12' EWNT LIGHT BRACKET SCREW HEX SELF TAP 1/4-20X3/4 HFSS 1/2-13X1 1/2 GR5 WASHER FLAT 1/2 SAE PLT NUT HEX FLG. LOCK 1/2-13 PLT. HFS 5/16-18X3/4 GR5 SEED BOX PARTITION NUT HEX FLANGE 5/16-18 PLT 30 FT PSS NT BOX WLDMT CABLE TIE MOUNT CABLE TIE.19X D 50LB LIGHT HARNESS, 10' WISHBONE AG LIGHT WIRING HARNESS-28' S/N 1044UU- S/N 1044UU- S/N 1044UU- S/N 1044UU- S/N 1044UU- S/N 1044UU- S/N 1044UU- S/N 1044UU- S/N 1044UU- 09/24/ P

22 Table of Contents Box To Wing Frames Part Number Index P /24/18

23 Table of Contents Part Number Index Box And Box Frames Box To Wing Frames Ref. Part No. Part Description Comments Revision dwg D C C C C C H H H D C C D C C C Image No. SEED BOX PARTITION NUT HEX FLANGE 5/16-18 PLT HFS 5/16-18X3/4 GR5 HFSS 1/2-13X1 1/2 GR5 WASHER FLAT 1/2 SAE PLT NUT HEX FLG. LOCK 1/2-13 PLT. 30 FT PSS NT BOX WLDMT PSS 30NT LH WING FRAME WLDMT PSS 30NT RH WING FRAME WLDMT HANDLE RPBY C HHCS 1/4-20X3/4 GR5 MANUAL PAK MOUNTING PLATE MINI END WHEEL PRESS WHEEL MANUAL PAK 1'" W/ GASKET NUT HEX FLNG T-LOCK 1/4-20 YLW 09/24/ P

24 Box Components Table of Contents Part Number Index P /24/18

25 Table of Contents Part Number Index Box And Box Frames Box Components Ref. Part No. Part Description Comments Revision dwg H H C C D C D C C C C C C S D C C C C D C D C C C H D D C C C Image No. 30 FT PSS NT BOX WLDMT LID 76 7/8 SEED HHCS 5/16-18X1 1/4 NYL WASHER FLAT 5/16 SAE PLT LID HANDLE SPRING.540 O.D.X 1 1/4 X.054W LATCH CASTING MACHINED X 90 LB GAS SPRING BALL STUD 10MM X 5/16-18 X 1/2 NUT LOCK 5/16-18 PLT SEED LEVEL BUSHING SEED LEVEL INDICATOR SCR HEX HD SHT MET #8 X 1/2 13' EW LID HINGE ASSEMBLY LID HINGE PIVOT RHSNB 3/8-16X1 GR5 NUT FLANGE LOCK 3/8-16 PLT CABLE 3/64 X 11 5/8 W/ EYELETS PIN COTTER 1/8 X 3/4 SEED LEVEL CHAIN BRACKET RIVET POP 1/8X.265LG FLG LID HINGE BASE PLATE SEED LEVEL ARM MOUNT WASHER INTERNAL STAR #10 PLT NUT HEX PLT SEED LEVEL ARM, 6 3/4R. TAB FOAM FLOAT FOAM FLOAT WASHER WASHER FLAT 1/4 USS PLT.00 HEX SS 1/4-20 NYLOCK RHSNB 3/8-16X2 GR5 09/24/ P

26 Table of Contents LED Lights (S/N 1045UU+) Part Number Index P /24/18

27 Table of Contents Part Number Index Box And Box Frames LED Lights (S/N 1045UU+) Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C D C C C D C D C C C C C C Image No. WISHBONE WIRING HRNSS-SHRT LED ADHESIVE BACK CORD CLIP LIGHT HARNESS, 35' LEAD - LED SCREW RD HD 1/4-20 X 5/8 DECAL SLOW MOVING-GALV. BACKED LIGHT HRNSS ENHANCE MODULE LED NUT HEX NYLOCK 5/16-18 PLT U-BOLT 5/16-18X2 1/32X2 11/16 HHCS 1/4-20X1 1/2 GR5 3N-3010 LIGHT MODULE MNT NUT HEX 1/4-20 PLT WASHER LOCK SPRING 1/4 PLT LIGHT, RED LAMP - LED 3N-3010 REAR LIGHT BRKT LIGHT, AMBER LAMP LED.25 X 1.73 X 5.73 SPACER WASHER FLAT RUBBER 1/2 HFSS 1/2-13X1 1/2 GR5 NUT HEX FLG LOCK 1/2-13 PLT SCREW HEX SELF TAP 1/4-20X3/4 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT 09/24/ P

28 Table of Contents Walkboards And Steps Part Number Index P /24/18

29 Table of Contents Part Number Index Box And Box Frames Walkboards And Steps Ref. Part No. Part Description Comments Revision dwg D D H C C C C C C C C D C H C C C C H H H Image No. LADDER MOUNT LH LADDER MOUNT RH WALKBOARD WING PSS 30 PIN HAIR COTTER.120 PLT PIN CLEVIS 1/2 X 1 3/4 HHCS 1/2-13X1 1/4 GR5 NUT LOCK 1/2-13 PLT HHCS 3/8-16X1 1/4 GR5 WASHER FLAT 3/8 SAE PLT NUT LOCK 3/8-16 NYLON INSERT HFS 3/8-16X1 GR5 OPENER HANDLE HOLDER PIN HAIR COTTER.148 WIRE SPRING ADJ HANDLE WELDMENT NUT FLANGE LOCK 3/8-16 PLT HHCS 1/2-13X2 1/4 GR5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT STEP WELDMENT PSS 30NT LADDER RH LADDER WELDMENT 3N-30 S/N 1167AA+ Shown S/N 1167AA+ S/N 1166AA- Shown S/N 1166AA- 09/24/ P

30 Table of Contents Feeder Cup Tray (7.5" LH) Part Number Index P /24/18

31 Table of Contents Part Number Index Metering System Feeder Cup Tray (7.5" LH) Ref. Part No. Part Description Comments Revision dwg D S D D D D D D D C D D D D D C C C C C C C C C C C C C D D C C C C C C C C C C Image No. MACHINED ADJUSTMENT SPOOL FEEDER CUP BEARING ASSEMBLY 5 5/8 BOX DVDR FOR 7 1/2 ROW 2SNT SEED BOX DIVIDER CLIP SPACER TUBE X /8 BOX DVDR FOR 8 ROW SPACER TUBE X BOX DVDR 5.13 X 60DEG SPACER TUBE X RUBBER GRAIN TUBE SPACER TUBE X BOX DVDR FOR 4.63 ROW 3N LH FEEDER CUP TRAY 3N-30 FD CUP DRIVE BAR BOX DVDR 10.0 X 40 DEG CLAMP HOSE 1 5/8 NO. 26 SCREW SET 5/16-18 SKT KP X 3/8 HHCS 1/4-20X3/4 GR5 HHCS 3/8-16X3/4 GR5 NUT HEX WHIZ 1/4-20 PLT WASHER FLAT 3/8 SAE PLT WASHER LOCK SPRING 3/8 PLT WASHER RETAINING PIN ROLL 3/16X1 1/4 PLT SEED CUP SLEEVE SEED CUP ASSEMBLY PM SEED CUP SPROCKET 5/8 SHAFT LOCKING COLLAR BEARING HUB 40A15 FEEDER CUP BEARING HOUSING BRG 30IDX55OD MM SNAP RING EXT BASIC 1 3/16 SNAP RING INTERNAL SEED CUP ADJUSTMENT HANDLE SEED CUP RIGHT HALF SEED CUP DOOR SEED CUP LEFT HALF SCR SELF TAP 8X3/8 TYPE25 BT NYLON WASHER-SPLIT SEED CUP WASHER RETAINER 09/24/ P

32 Table of Contents Feeder Cup Tray (7.5" RH) Part Number Index P /24/18

33 Table of Contents Part Number Index Metering System Feeder Cup Tray (7.5" RH) Ref. Part No. Part Description Comments Revision dwg D S D D D D D D D C D D D D D C C C C C C C C C C C C C D D C C C C C C C C C C Image No. MACHINED ADJUSTMENT SPOOL FEEDER CUP BEARING ASSEMBLY 5 5/8 BOX DVDR FOR 7 1/2 ROW 2SNT SEED BOX DIVIDER CLIP SPACER TUBE X /8 BOX DVDR FOR 8 ROW SPACER TUBE X BOX DVDR 5.13 X 60DEG SPACER TUBE X RUBBER GRAIN TUBE SPACER TUBE X BOX DVDR FOR 4.63 ROW 3N-30 FD CUP DRIVE BAR BOX DVDR 10.0 X 40 DEG 3N RH FEEDER CUP TRAY CLAMP HOSE 1 5/8 NO. 26 SCREW SET 5/16-18 SKT KP X 3/8 HHCS 1/4-20X3/4 GR5 HHCS 3/8-16X3/4 GR5 NUT HEX WHIZ 1/4-20 PLT WASHER FLAT 3/8 SAE PLT WASHER LOCK SPRING 3/8 PLT WASHER RETAINING PIN ROLL 3/16X1 1/4 PLT SEED CUP SLEEVE SEED CUP ASSEMBLY PM SEED CUP SPROCKET 5/8 SHAFT LOCKING COLLAR BEARING HUB 40A15 FEEDER CUP BEARING HOUSING BRG 30IDX55OD MM SNAP RING EXT BASIC 1 3/16 SNAP RING INTERNAL SEED CUP ADJUSTMENT HANDLE SEED CUP RIGHT HALF SEED CUP DOOR SEED CUP LEFT HALF SCR SELF TAP 8X3/8 TYPE25 BT NYLON WASHER-SPLIT SEED CUP WASHER RETAINER 09/24/ P

34 Table of Contents Feeder Cup Tray (10" LH) Part Number Index P /24/18

35 Table of Contents Part Number Index Metering System Feeder Cup Tray (10" LH) Ref. Part No. Part Description Comments Revision dwg D S D D D D D D D C D D D C C C C C C C C C C C C C D D C C C C C C C C C C Image No. MACHINED ADJUSTMENT SPOOL FEEDER CUP BEARING ASSEMBLY SPACER TUBE X /16 BOX DVDR FOR 7 1/2 ROW 2SNT SEED BOX DIVIDER CLIP SPACER TUBE X C058TUBE X BOX DIVIDER FOR 10 ROW BOX DVDR 6.13 X 60DEG RUBBER GRAIN TUBE 3N-30 FD CUP DRIVE BAR BOX DVDR 10.0 X 40 DEG 3N LH FEEDER CUP TRAY CLAMP HOSE 1 5/8 NO. 26 SCREW SET 5/16-18 SKT KP X 3/8 RHSNB 5/16-18X1 1/4 GR5 HHCS 3/8-16X3/4 GR5 NUT HEX WHIZ 1/4-20 PLT WASHER FLAT 3/8 SAE PLT WASHER LOCK SPRING 3/8 PLT WASHER RETAINING PIN ROLL 3/16X1 1/4 PLT SEED CUP SLEEVE SEED CUP ASSEMBLY PM SEED CUP SPROCKET 5/8 SHAFT LOCKING COLLAR BEARING HUB 40A15 FEEDER CUP BEARING HOUSING BRG 30IDX55OD MM SNAP RING EXT BASIC 1 3/16 SNAP RING INTERNAL SEED CUP ADJUSTMENT HANDLE SEED CUP RIGHT HALF SEED CUP DOOR SEED CUP LEFT HALF SCR SELF TAP 8X3/8 TYPE25 BT NYLON WASHER-SPLIT SEED CUP WASHER RETAINER 09/24/ P

36 Table of Contents Feeder Cup Tray (10" RH) Part Number Index P /24/18

37 Table of Contents Part Number Index Metering System Feeder Cup Tray (10" RH) Ref. Part No. Part Description Comments Revision dwg D S D D D D D D D C D D D C C C C C C C C C C C C C D D C C C C C C C C C C Image No. MACHINED ADJUSTMENT SPOOL FEEDER CUP BEARING ASSEMBLY SPACER TUBE X /16 BOX DVDR FOR 7 1/2 ROW 2SNT SEED BOX DIVIDER CLIP SPACER TUBE X C058TUBE X BOX DIVIDER FOR 10 ROW BOX DVDR 6.13 X 60DEG RUBBER GRAIN TUBE 3N-30 FD CUP DRIVE BAR BOX DVDR 10.0 X 40 DEG 3N RH FEEDER CUP TRAY CLAMP HOSE 1 5/8 NO. 26 SCREW SET 5/16-18 SKT KP X 3/8 HHCS 1/4-20X3/4 GR5 HHCS 3/8-16X3/4 GR5 NUT HEX WHIZ 1/4-20 PLT WASHER FLAT 3/8 SAE PLT WASHER LOCK SPRING 3/8 PLT WASHER RETAINING PIN ROLL 3/16X1 1/4 PLT SEED CUP SLEEVE SEED CUP ASSEMBLY PM SEED CUP SPROCKET 5/8 SHAFT LOCKING COLLAR BEARING HUB 40A15 FEEDER CUP BEARING HOUSING BRG 30IDX55OD MM SNAP RING EXT BASIC 1 3/16 SNAP RING INTERNAL SEED CUP ADJUSTMENT HANDLE SEED CUP RIGHT HALF SEED CUP DOOR SEED CUP LEFT HALF SCR SELF TAP 8X3/8 TYPE25 BT NYLON WASHER-SPLIT SEED CUP WASHER RETAINER 09/24/ P

38 Table of Contents Part Number Index Loup Shaft Monitor (2 Channel A) (3 Channel A) P /24/18

39 Table of Contents Part Number Index Metering System Loup Shaft Monitor (2 Channel A) (3 Channel A) Ref. Part No. Part Description Comments Revision dwg C C C D C D C C Image No. HFSS 1/4-20X3/4 GR5 HOSE CLIP 5/8 I.D. NUT HEX LOCK 1/4-20 FLG CABLE TIE, NYLON MAGNET, ADHESIVE BACKED, LARGE NUT HEX JAM, PLASTIC M16 X 2 SHAFT SENSOR MOUNT SCR SELF TAP #10 X 3/4 LOUP SHAFT SENSOR 2&3 CHANNEL SMALL CUP SENSOR MOUNT LOUP 3 CHANNEL SHAFT MONITOR LOUP 2 CHANNEL SHAFT MONITOR SHAFT MONITOR EXT. 30' 6P WP HARNESS 3 SHAFT MONITOR LOUP LOUP 3 CHANNEL SHAFT MONITOR SHAFT MONITOR EXT. 25' 4P WP HARNESS 2 SHAFT MONITOR LOUP 09/24/ P

40 Table of Contents Part Number Index Seed Rate Adjustment Handle Assembly P /24/18

41 Table of Contents Part Number Index Metering System Seed Rate Adjustment Handle Assembly Ref. Part No. Part Description Comments Revision dwg H H H C C C C C C D C C C C C C C C C C C C C Image No. SEED RATE ADJ WLDMNT SEED RATE ADJ HANDLE WLDMNT ADJ LOCK PLATE ASS'Y - 1 1/2 W GRIP 1/4 X 1 1/2 X 3 LG NAME PLATE ADJ. GUIDE LONG HHCS 3/8-16X3/4 GR5 WASHER LOCK SPRING 3/8 PLT WASHER FLAT 3/8 SAE PLT WASHER MACH 1.19 X.63 X 18GA ADJUSTMENT HANDLE PIVOT PIN COTTER 3/16 X 1 1/4 PLT NUT WING 1/2-13 PLT WASHER ADJ HANDLE BRG BRG BALL 17IDX40OD 6203 SNAP RING EXT 17 MM HHCS 5/16-18X3/4 GR5 WASHER FLAT 5/16 USS PLT WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT SCREW RD HD 8-32 X 3/8 BRASS WASHER FLAT #8 BRASS WASHER INTERNAL STAR #8 BRASS NUT HEX 8-32 BRASS 09/24/ P

42 Table of Contents Contact Drive Wheel Part Number Index P /24/18

43 Table of Contents Part Number Index Drive Contact Drive Wheel Ref. Part No. Part Description Comments Revision dwg C D C C C C C D C C H C D D C C D C C S C C C D C C C S C D C C D C C C C C D D C D S C D C S C C C D C H C C Image No. TIRE/WHEEL ASSY 13/5 X 6 SPACER TUBE 1.5X1.032X1.06 WASHER MACH 1.50 X 1.00 X 18GA FLANGETTE 52 3-BOLT PLT BRG INS 7/8HEXX2.04OD SPH FLG TP LK 5/16-18ZNYCR RHSNB 5/16-18X1 1/4 GR5 CONTACT WHEEL OUTER ARM WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT CONTACT WHEEL BRACE WLDMT 30NT HHCS 1/2-13X1 1/4 GR5 CONTACT WHL SIDE PLATE CONTACT WHEEL SHAFT 7/8 HEX PIN ROLL 1/4 X 1 1/2 LG PLT SPKT 50C17 X 7/8 HEX BORE CTCT WHEEL SPRING ANCHOR BAR 3N-3010 / 20 ACRE METER 3N-3010 / 20 HECTARE METER RATCHET CLUTCH CCW 7/8 HEX SPKT 50C30 X 7/8 HEX BORE SPKT 50C20 X 7/8 HEX BORE SPKT 50C15 X 7/8 HEX BORE SPACER TUBE 1ODX12GAX5.5 HHCS 3/4-10X8 GR5 PLT WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT HD DOWN PRESSURE SPRING ASSY SPRING HOLD DOWN HD COULTER SPRING PLUG CASTING NUT HEX JAM 1/2-13 PLT HHCS 1/2-13X4 FTHD ACREMETER OFFSET MOUNT PADDLE HHCS 5/8-11X3 1/2 GR5 SPKT IDLER BRG #50 15 TOOTH NUT HEX 5/8-11 PLT WASHER FLAT 5/8 USS PLT WASHER LOCK SPRING 5/8 PLT CHAIN RL # PITCHES SENSOR DISC, 42T 5.3 DIA PLTD SCREW SET 5/16-18 SKT KP X 3/8 COLLAR LOCK 7/8 HEX LOCK COLLAR, 7/8 HEX W/ SET SC PIN LINCH 3/16 X 1 9/16 LONG COUPLER, DRY FERT PIN ROLL 1/4 X 1 1/2 LG PLT RATCHET CLUTCH CW 7/8 HEX HHCS 1/4-20X2 1/4 GR5 WASHER FLAT 1/4 USS PLT NUT-LOCK 1/4-20 PLT HEX SHAFT LONG NUT FLANGE LOCK 3/8-16 PLT SPROCKET STORAGE WLDMENT LONG HHCS 3/8-16X1 1/2 GR5 RHSNB 5/16-18X1 GR5 Refer to "Ratchet Clutch CCW (LH Side) ( S)". (S/N 1002UU-) Refer to "Ratchet Clutch CW (RH Side) ( S)". (S/N 1002UU-) (S/N 1002UU-) (S/N 1002UU-) 09/24/ P

44 Table of Contents Contact Drive Wheel (continued) Part Number Index Ref Part No K D D D C C C C C Part Description AUX DOWNPRESSURE SPRING ASSY DOWNPRESS SPRING ANCHOR DOWNPRESSURE SPRING ROD DP SPRING ANCHOR SPACER TUBE SNAP RING EXT 1 HEAVY HHCS 1/2-13X1 1/2 GR5 HHCS 3/4-10X7 GR5 3N-3010 / 20 ACRE METER 3N-3010 / 20 HECTARE METER Comments (Option) Revision P /24/18

45 Table of Contents Part Number Index Drive Contact Drive Wheel (continued) This Page Intentionally Left Blank 09/24/ P

46 Table of Contents Transmission Drive Part Number Index P /24/18

47 Table of Contents Part Number Index Drive Transmission Drive Ref. Part No. Part Description Comments Revision dwg D D D H H S L L D D D D H S D C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C D H C D Image No. TUBE RND DOM. 1 OD X 7/32WX3.0 TUBE RND 1 OD X 7/32W X 2.13 U-JOINT PIN 3/8 U-JOINT DRIVE SHAFT YOKE TELESCOPING DRIVE SHAFT TUBE DOUBLE IDLER SPOOL ASSY #50 PNT ROW CLUTCH ASS LH NO STRAP PNT ROW CLUTCH ASS RH NO STRAP STUB SHAFT 7/8 HEX LG SLIDER SHAFT 7/8 HEX LG TRANS REAR SHFT 7/8 HEX 18.41L 3N-30 FD CUP IDLER PLATE CEN SPRKT STORAGE WELD LOCK COLLAR, 7/8 HEX W/ SET SC IDLER BOLT PLATE GREASE ZERK STRAIGHT 1/4-28 RPBY C RHSNB 5/16-18X1 1/4 GR5 HHCS 3/8-16X1 1/2 GR5 HHCS 1/2-13X1 1/2 GR5 HHCS 1/2-13X3 1/4 GR5 RHSNB 3/8-16X1 3/4 GR5 RHSNB 5/16-18X1 GR5 HHCS 1/2-13X4 FTHD HHCS 1/2-13X4 1/2 GR5 SPTHD NUT HEX 1/2-13 PLT FLG TP LK 5/16-18ZNYCR NUT FLANGE LOCK 3/8-16 PLT WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1/2 USS HARD PLT PIN COTTER 1/8 X 3/4 PIN ROLL 1/4 X 1 1/2 LG PLT PIN LINCH 3/16 X 1 9/16 LONG SPKT 40B14 X 7/8 HEX BORE SPKT 50C15 X 7/8 HEX BORE SPKT 50C22 X 7/8 HEX BORE SPKT 50C25 X 7/8 HEX BORE SPKT 50C28 X 7/8 HEX BORE SPKT 50C44 X 7/8 HEX BORE SPKT 50C60 X 7/8 HEX BORE SPKT 50C30 X 7/8 HEX BORE SPKT 50C20 X 7/8 HEX BORE SEED HOSE X 45 RIBS U-JOINT NYLATRON CROSS BLOCK IDLER 1 PC 2.38X1.01X1.062 IDLER SPOOL # X1.01X.31 FLANGETTE 52 3-BOLT PLT BRG INS 7/8HEXX2.04OD SPH PIN COTTER 7/64 X 1 LONG WASHER FLAT 1/2 USS PLT TUBE RND 1 OD X 7/32W X 1.56 OFFSET DOUBLE IDLER WELDMENT WASHER MACH 1.50 X 1.00 X 18GA POINT ROW CLUTCH SHAFT Includes items 44, See "Point Row Clutch" See "Point Row Clutch" Can use item 36 or 39 09/24/ P

48 Wing Drive Table of Contents Part Number Index P /24/18

49 Wing Drive Table of Contents Part Number Index Drive Ref. Part No. Part Description Comments Revision dwg D D D H D D D D S C C C C C C C C C C C C C C C C C C C C C C C Image No. TUBE RND 1 OD X 7/32W X 2.13 TUBE RND 1 OD X 7/32W X 3.31 CHAIN RL # PITCHES U-JOINT DRIVE SHAFT YOKE STUB SHAFT 7/8 HEX LG TRANS REAR SHFT 7/8 HEX 18.41L 3N-30 FD CUP IDLER PLATE WNG GREASE BANK MOUNT LOCK COLLAR, 7/8 HEX W/ SET SC HHCS 1/4-20X3/4 GR5 RHSNB 5/16-18X1 1/4 GR5 HHCS 1/2-13X1 1/2 GR5 RHSNB 5/16-18X1 GR5 HHCS 1/2-13X4 1/2 GR5 HHCS 1/2-13X4 FTHD NUT-HEX 1/4-20 PLT NUT HEX 1/2-13 PLT FLG TP LK 5/16-18ZNYCR WASHER LOCK SPRING 1/4 PLT WASHER FLAT 1/4 SAE PLT WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1/2 USS HARD PLT PIN ROLL 1/4 X 1 1/2 LG PLT PIN LINCH 3/16 X 1 9/16 LONG SPKT 40B14 X 7/8 HEX BORE SPKT 50C15 X 7/8 HEX BORE SPKT 50C44 X 7/8 HEX BORE CHAIN RL #50 X 80 PITCHES IDLER 1 PC 2.38X1.01X1.062 IDLER SPOOL # X1.01X.31 FLANGETTE 52 3-BOLT PLT BRG INS 7/8HEXX2.04OD SPH 09/24/ P

50 Table of Contents Part Number Index Ratchet Clutch CW (RH Side) ( S) P /24/18

51 Table of Contents Part Number Index Drive Ratchet Clutch CW (RH Side) ( S) Ref. Part No. Part Description Comments Revision dwg D D D D D D C C C C C C C C C S Image No. CLUTCH FRICTION WASHER CLUTCH SPRING RETAINER CLUTCH SLIDE PLATE - CW CLUTCH DRIVE PLATE LONG - CW CLUTCH HUB 7/8 HEX BORE PIVOT SHAFT 7/8 HEX LG SNAP RING EXT 1 1/4 HEAVY HHCS 1/4-20X3/4 GR5 WASHER LOCK SPRING 1/4 PLT PIN ROLL 3/16X 1 1/2 PLT PIN ROLL 1/4 X 3/4 PLT PIN ROLL 1/4 X 1 1/2 LG PLT SPRING COMP 2 1/16 OD X 4 LG SPKT 50A BR/6HOL BSHG FLG 1.26IDX1.41ODX.87L RATCHET CLUTCH CW 7/8 HEX Includes items 1-5, 7-11, /24/ P

52 Table of Contents Part Number Index Ratchet Clutch CCW (LH Side) ( S) P /24/18

53 Table of Contents Part Number Index Drive Ratchet Clutch CCW (LH Side) ( S) Ref. Part No. Part Description Comments Revision dwg D D D D D D C C C C C C C C C S Image No. CLUTCH FRICTION WASHER CLUTCH SPRING RETAINER CLUTCH SLIDE PLATE - CCW CLUTCH DRIVE PLATE LONG - CCW CLUTCH HUB 7/8 HEX BORE PIVOT SHAFT 7/8 HEX LG SNAP RING EXT 1 1/4 HEAVY HHCS 1/4-20X3/4 GR5 WASHER LOCK SPRING 1/4 PLT PIN ROLL 3/16X 1 1/2 PLT PIN ROLL 1/4 X 3/4 PLT PIN ROLL 1/4 X 1 1/2 LG PLT SPRING COMP 2 1/16 OD X 4 LG SPKT 50A BR/6HOL BSHG FLG 1.26IDX1.41ODX.87L RATCHET CLUTCH CCW 7/8 HEX Includes items 1-5, 7-11, /24/ P

54 Table of Contents 10 Series Opener Arms & Mounts Part Number Index (Applies to 3N-3010 only) P /24/18

55 Table of Contents Part Number Index Openers 10 Series Opener Arms & Mounts (Applies to 3N-3010 only) Ref. Part No. Part Description Comments Revision dwg C C D C H C D H H H C C C D C C C C D Image No. HFS 1/2-13 X 5 3/4 NUT HEX FLG. LOCK 1/2-13 PLT. SING OPENER INNER PIVOT TUBE PARALLEL ARM PIVOT BUSHING SING OPENER LOWER ARM WELDMENT SPRING EXT 1 5/8OD X 6.6X /16 SPRING STRAP SING OPENER UPPER ARM WELDMENT PSS OPENER MOUNT REAR WLDMT PSS OPENER MOUNT FRONT WLDMT U-BOLT 5/8-11 X 7 1/32 X 6 1/2 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT 10P 20P UP FLOAT LIMITER HHCS 1/4-20X3 GR5 NUT-LOCK 1/4-20 PLT END WHEEL FERTILIZER HOSE SCREW HEX SLT10-16X1/2P.THD CT 3N-40 SEED HOSE CLAMP PLATE Center frame openers only 09/24/ P

56 Table of Contents 10 Series Opener Body Part Number Index (Applies to 3N-3010 only) P /24/18

57 Table of Contents Part Number Index Openers 10 Series Opener Body (Applies to 3N-3010 only) Ref. Part No. Part Description Comments Revision dwg C H C C D C C S D C C C H C C V C C C C D AD21010 AD21011 AD21012 AD21013 AD21014 Image No. 3N-40 SEED TUBE NO SENSOR HOLE 10 SERIES SINGULATING OPENER PIN COTTER 3/32 X 1 LONG PIN CLEVIS 1/4 X 3 23/64 USBL SEED FLAP MOUNTING CLIP, SING SEED FLAP, RUBBER, SEED-LOK SEED FLAP, UHMW, LONG DD W/205 BRG-PLD FLNG-4MM DD BRG FLANGE DUST COVER WASHER MACH 1.19 X.63 X 18GA HHCS 5/8-11X1 1/2 GR5 NYL PIN ROLL 5/16 X 5/8 PLT SCRAPER-SPREADER SER RIVET,BUTTON HEAD 1/4 X 1/2 HSG RIBB FLG 6BOLT PLT BEARING AA205DD FLAT DISK BLADE-4MM THICK HHCS 3/8-16X1 1/4 GR5 NUT HEX 3/8-16 PLT WASHER LOCK SPRING 3/8 PLT 10P AD OUTSIDE SCRAPER MOUNT AIR DESIGN SCRAPER J.D.2.5W RH AIR DESIGN SCRAPER J.D.2.5W LH AIR DESIGN SCRAPER J.D.MNT RH AIR DESIGN SCRAPER J.D.MNT LH AIR DESIGN SCRAPER J.D.SPRING S/N 1023UU+ S/N 1022UU- 09/24/ P

58 Table of Contents 20 Series Opener Arms & Mounts Part Number Index (Applies to 3N-3020 only) P /24/18

59 Table of Contents Part Number Index Openers 20 Series Opener Arms & Mounts (Applies to 3N-3020 only) Ref. Part No. Part Description Comments Revision dwg C C D C H C C D D H H H D C C C D C C C C D Image No. HFS 1/2-13 X 5 3/4 NUT HEX FLG. LOCK 1/2-13 PLT. SING OPENER INNER PIVOT TUBE PARALLEL ARM PIVOT BUSHING SING OPENER LOWER ARM WELDMENT SPRING EXT 1 5/8OD X 6.6X.177 SPRING EXT 1.575O.D.X.225 WIRE 6 13/16 SPRING STRAP 3 13/32 SPRING STRAP SING OPENER UPPER ARM WELDMENT PSS OPENER MOUNT REAR WLDMT PSS OPENER MOUNT FRONT WLDMT 20 SER SING FRT INNER PIVOT TB U-BOLT 5/8-11 X 7 1/32 X 6 1/2 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT 10P 20P UP FLOAT LIMITER HHCS 1/4-20X3 GR5 NUT-LOCK 1/4-20 PLT END WHEEL FERTILIZER HOSE SCREW HEX SLT10-16X1/2P.THD CT 3N-40 SEED HOSE CLAMP PLATE Used with 1x12 Press Wheels. Used with 1x10 Press Wheels. Used with C. Used with C. Center frame openers only 09/24/ P

60 Table of Contents 20 Series Opener Body Part Number Index (Applies to 3N-3020 only) P /24/18

61 Table of Contents Part Number Index Openers 20 Series Opener Body (Applies to 3N-3020 only) Ref. Part No. Part Description Comments Revision dwg C H C C D C C S S C C C H C C C V C D C S C C C D C C C C D S C C S C C C C D C C H C C C C C D D K C Image No. 3N-40 SEED TUBE NO SENSOR HOLE 20 SERIES SINGULATING OPENER PIN COTTER 3/32 X 1 LONG PIN CLEVIS 1/4X1 31/64 USBL SEED FLAP MOUNTING CLIP, SING SEED FLAP, RUBBER, SEED-LOK SEED FLAP, UHMW, LONG RPBY S DD W/205 BRG-PLD FLNG-4MM WASHER MACH 1.19 X.63 X 18GA HHCS 5/8-11X1 1/2 GR5 NYL PIN ROLL 5/16 X 5/8 PLT SCRAPER-SPREADER SER SCRAPER-SPREADER 10-20SER 2003 RIVET,BUTTON HEAD 1/4 X 1/2 HSG RIBB FLG 6BOLT PLT BEARING AA205DD FLAT DISK BLADE-4MM THICK 20 SER OPNR CAM PIN SNAP RING EXT 5/8.050 T RPBY C CASTING - STAINLESS T-HANDLE NUT HEX 7/16-20 GR8 WASHER LOCK 7/16 PLT 20 SER OPNR PW CAM PRESS WHEEL ARM PIVOT BUSHING SPRING COMP 5/8 OD X 1 3/4 LG WASHER FLAT 3/8 SAE PLT PIN COTTER 1/8 X 3/4 20P SIDE DEPTH WHEEL ARM 20P ELIMINATOR BUSHING ASSY WASHER LOCK SPRING 5/8 PLT HHCS 5/8-11X2 1/2 GR5 NYL 2X13 DEPTH WHEEL ASSY HFSS 5/16-18X1/2 GR5 NUT HEX WHIZ 5/16-18 PLT 2X13 D.W. OUTER RIM HALF 2X13 SIDE DEPTH TIRE 20 SER SIDE DEPTH WL STIFF PLT 2X13 D.W. INNER RIM HALF HHCS 7/ /4 GR8 SEP &FERT TUBE 10-20SER 1999 GREASE ZERK STRAIGHT 1/4-28 WASHER FLAT 1.31ODX.65IDX.188T HHCS 5/8-11X2 GR5 NYL RHSNB 5/16-18X3/4 GR5 U CUP SEAL 20P DEPTH WHL OUTER BUSHING 20P DEPTH WHL ECCENTRIC BUSHNG 20 SER OPENER T-HANDLE SUBASSY BRG INS.63IDX1.57OD DBL LIP Used with Seed-Lok (shown). Used without Seed-Lok. Includes S/N 7388B+ S/N 7387B- Includes Includes 33-38, 44 Option Includes 20, /24/ P

62 Table of Contents Keeton Seed Firmer (Option) Part Number Index P /24/18

63 Table of Contents Part Number Index Openers Keeton Seed Firmer (Option) Ref. Part No. Part Description Comments Revision dwg BXT C C C Image No. KEETON NARROW TAIL KEETON BRACKET 10/20 SERIES KEETON GUARD RHSNB 3/8-16X2 GR5 NUT HEX 3/8-16 PLT WASHER LOCK SPRING 3/8 PLT 09/24/ P

64 Table of Contents Air Design Scraper (Option) Part Number Index P /24/18

65 Table of Contents Part Number Index Openers Air Design Scraper (Option) Ref. Part No. Part Description Comments Revision dwg D C C C C Image No. 10P20P AD INSIDE SCRAPER MOUNT HHCS 3/8-16X1 1/4 GR5 WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT SCRAPER-SPRING LOAD-AIR DESIGN 09/24/ P

66 Table of Contents Side Wheel Scraper (Option) Part Number Index P /24/18

67 Table of Contents Part Number Index Openers Side Wheel Scraper (Option) Ref. Part No. Part Description Comments Revision dwg D C C C D C Image No. 20P SIDE WHEEL SCRAPER MOUNT WASHER LOCK SPRING 5/16 PLT HHCS 5/16-18X5/8 RHSNB 3/8-16X3/4 GR5 20P SIDE WHEEL SCRAPER NUT FLANGE LOCK 3/8-16 PLT 09/24/ P

68 Table of Contents 10 & 20 Series Seed-Lok (Option) Part Number Index P /24/18

69 Table of Contents Part Number Index Openers 10 & 20 Series Seed-Lok (Option) Ref. Part No. Part Description Comments Revision dwg C D C C D D C C C H D C D C C C S C V C C C C Image No. PIN COTTER 3/16 X 1 SEED LOCK LOCK-UP CAM SPRING COMP.85ODX2.0LGX.067W PIN COTTER 1/4 X 1 PLT 10 SER SEED LOCK LOCK-UP BAR 20 SER SEED LOCK LOCK-UP BAR WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT HHCS 3/8-16X1 1/2 GR5 SEED LOCK MOUNT, SINGULATING SEED LOCK ARM, SINGULATING SPRING, 1 O.D.X.125WIREX 3 1/2 5 SEED-LOK WHL ARM PIVOT PIN RING SNAP EXTERNAL '"E'" 1/2 WASHER INTERNAL STAR 3/8 PLT. SCR HX SKT BUT CP 3/8-16X3/4 SD-LK 203 BEARING WHEEL ASSY 5/8 X 5 SEED FIRMING WHEEL BEARING 203 SEED-LOK WITH PIN SCR PH THD FMG #10X1/2 TP ZP RETAINER W/BONDED SEAL 4BLT LHS CP 3/8-16X3/4 GR8 PLATED WASHER FLAT 3/8 USS PLT Shown. 20 Series only. 10 Series only. 10 Series only. 09/24/ P

70 Coulters Table of Contents Part Number Index P /24/18

71 Coulters Table of Contents Part Number Index Openers Ref. Part No. Part Description Comments Revision dwg S H C C C C D C D C C D C C C C C C C V D C S C C C C C C C C C C D C C D D C C C Image No. CLTR CASTING ASSY CLTR SWING ARM WLMT WASHER MACH 1 1/4X3/4X14GA SNAP RING 3/4 EXTERNAL HEAVY EYE BOLT 3/4-10X14 3/4 LG SP WASHER MACH 1 7/8X1 1/4X 14GA SPRING 2.25 O.D. X.5 COIL COULTER SPRING GUIDE TUBE COULTER SPRING WASHER GREASE ADAPT 1/4-28M X 1/4 TB BUSHING 1X3/4X1 1/8 FLG HD COULTER SPRING BAR 14 3/4 BLK HHCS 7/8-9X3 GR5 WASHER LOCK SPRING 7/8 PLT NUT HEX 7/8-9 PLT RHSNB 1/2-13X1 1/4 GR5 OIL-SEAL DOUBLE LIP BEARING CONE LM BEARING CUP LM COULTER HUB & CUP ASSY HUB GREASE CAP GREASE ZERK STRAIGHT 1/4-28 COULTER HUB PACKAGE PIN COTTER 3/16 X 1 3/4 PLT COULTER BLADE FLUTED 17 COULTER BLADE 5/8 WAVY 17 COULTER BLADE 3/4 WAVY 5/8 WAVY TURBO BLADE WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT WASHER SPINDLE - 7/8 NUT HEX SLOTTED 7/8-14 PLT U-BOLT 5/8-11 X 4 1/32 X 4 COULTER CLAMP BAR NUT HEX 5/8-11 PLT SNAP RING EXT 1 1/4 HEAVY OFFSET COULTER MOUNT PLATE OFFSET COULTER BRKT F/LH BOX WASHER LOCK SPRING 5/8 PLT HHCS 1/2-13X1 3/4 GR5 NUT HEX JAM 3/4-10 PLT Includes items 19,22 Includes items 16,17,18,20 09/24/ P

72 Grease Bank Table of Contents Part Number Index P /24/18

73 Grease Bank Table of Contents Part Number Index Openers Ref. Part No. Part Description Comments Revision dwg C C R C C C C C D Image No. GREASE ZERK STRAIGHT 1/8-27NPT AD PUSH 1/4 TUBE 1/8 FNPT TUBE NYLON 1/4OD X 062WL GREASE ADAPT 1/4-28M X 1/4 TB HFSS 1/4-20X1/2 GR5 WASHER FLAT 1/4 SAE PLT WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT GREASE BANK MOUNT 09/24/ P

74 Table of Contents Coulter Tine (Option) Part Number Index P /24/18

75 Table of Contents Part Number Index Openers Coulter Tine (Option) Ref. Part No. Part Description Comments Revision dwg C C C D C C C C D C C Image No. HHCS 7/8-9X3 1/2 GR5 HHCS 7/8-9X5 1/2 GR5 2SNT COULTER TINE COULTER TINE MOUNT PLATE REAR HHCS 3/8-16X1 1/4 GR5 WASHER FLAT 3/8 USS PLT WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT COULTER TINE OFFST MNT SPACER WASHER LOCK SPRING 7/8 PLT NUT HEX 7/8-9 PLT Use with part number D. Used with offset coulter mounts only. 09/24/ P

76 Table of Contents 2" x 13" Single Press Wheel Part Number Index P /24/18

77 Table of Contents Part Number Index Press Wheels 2" x 13" Single Press Wheel Ref. Part No. Part Description Comments Revision dwg C C C C C C C C D C D C C C C C C C S Image No. HHCS 5/8-11X2 1/2 GR5 WASHER LOCK SPRING 5/8 PLT NUT HEX LOCK 1/4-20 FLG 2 X 13 PRESS WHEEL RIM HALF BRG.63ID PRESS WHL ASY 2 X 13 PRESS WHEEL TIRE HHFS 1/4-20 X 1 1/2 GR 5 2 X 13 PRESS WHEEL ASSEMBLY UNIVERSAL PW ARM MACH 2&3X13 PARALLEL ARM PIVOT BUSHING PRESS WHEEL PIVOT TUBE PIN CLEVIS 3/8 X 2 1/8 USABLE SPRING.540 O.D.X 1 1/4 X.054W OPENER TRUNION HFS 1/2-13X3 3/4 GR5 SPTHD NUT HEX FLG. LOCK 1/2-13 PLT. T-HANDLE ASSEMBLY PIN ROLL 5/32 X 5/8 PLT PW ADJUSTMENT TRUNNION ASSY Includes 12,13,14,17 & /24/ P