Parts Manual. No-Till Air Drill Implement NTA3010 & NTA3510. Copyright 2017 Printed 12/27/ P

Transcription

1 Parts Manual NTA3010 & NTA3510 No-Till Air Drill Implement Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! Cover illustration may show optional equipment not supplied with standard unit. Copyright 2017 Printed 12/27/ P

2 Table of Contents Section 1: Introduction...4 Using This Manual...4 Manual Replacement Information...4 Manual Revisions...4 Touch-up Paint...4 Hardware Legend...5 Replacement Hardware...5 Serial Numbers...5 Part Number Service Coding...5 Frames...6 Center Frame To Rockshaft...6 Left Wing To Center...8 Right Wing To Center...10 Cart Hook-Up for ADC2220 Air Drill Cart...12 Cart Hook-Up for ADC2350 Air Drill Cart...14 Harness & Light Kit for ADC2220 Air Drill Cart (S/N Y1596-)...16 Harness & Light Kit for ADC2220 Air Drill Cart (S/N Y1597+)...18 Harness & Light Kit for ADC2350 Air Drill Cart (S/N Y1596-)...20 Harness & Light Kit for ADC2350 Air Drill Cart (S/N Y1597+)...22 Lift Switch Mounting (ADC2350 Only)...24 Slow Moving Vehicle Emblem...26 Gauge Wheels...28 Dual Gauge Wheel...28 Gauge Wheel And Tire...30 Parallel Arm Dual Gauge Wheel...32 Parallel Arm Lift Assembly...34 Openers...36 Parallel Arm Opener...36 Coulter (S/N Z1148-)...38 Coulter (S/N Z1149+)...40 Grease Bank...42 Press Wheels " x 12" Double "V" Press Wheel " x 13" Single Press Wheel " x 13" Single Press Wheel " x 14" Peaked Single Press Wheel...50 Hydraulics...52 Folding Hydraulics...52 Depth Stop Valve Assembly...54 Hydraulic Cylinder ( C)...56 Hydraulic Cylinder ( C)...58 Hydraulic Cylinder ( C)...60 Hydraulic Cylinder ( C)...62 Hydraulic Shut-Off Valve ( C)...64 NTA Control Valve (S/N Z1101+)...66 Pressure Reducing Valve ( C)...68 Relief & Solenoid Valves...70 Relief Valve ( C)...72 Relief Valve ( C)...74 Solenoid Valve ( C)...76 Stroke Control Valve ( C)...78 Transport Hydraulics (RDIF Cartridge)...80 Transport Hydraulics (RPIL Cartridge)...82 Monitor...84 Blockage Monitor (Option)...84 Agtron Sensor (Option) (S/N Z1263-)...86 Agtron AGS25 Blockage Sensor (Option) (S/N Z1264+)...88 Implement Kit...90 Monitor NTA Monitor NTA Towers...96 Tower for ADC2220 Air Cart Drill...96 Tower for ADC2350 Air Cart Drill...98 Decals Decal Placement Options Coulter Tine Harrow Assembly Harrow Center Mount Harrow Wing Mount Spring Scraper Assembly Weights ( S) Towers Tower for ADC2220 Air Cart Drill Tower for ADC2350 Air Cart Drill Part Number Index Copyright 2017 All rights reserved Printed 12/27/17 Great Plains Manufacturing, Inc. provides this publication as is without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. Great Plains Manufacturing, Incorporated Trademarks The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains All other brands and product names are trademarks or registered trademarks of their respective holders. Printed in the United States of America P /27/17

3 Alphabetized Table of Contents Selected Models 1 1" x 12" Double "V" Press Wheel " x 13" Single Press Wheel " x 13" Single Press Wheel " x 14" Peaked Single Press Wheel...50 A Agtron AGS25 Blockage Sensor (Option) (S/N Z1264+)...88 Agtron Sensor (Option) (S/N Z1263-)...86 B Blockage Monitor (Option)...84 C Cart Hook-Up for ADC2220 Air Drill Cart...12 Cart Hook-Up for ADC2350 Air Drill Cart...14 Center Frame To Rockshaft...6 Coulter (S/N Z1148-)...38 Coulter (S/N Z1149+)...40 Coulter Tine D Decal Placement Depth Stop Valve Assembly...54 Dual Gauge Wheel...28 F Folding Hydraulics...52 G Gauge Wheel And Tire...30 Grease Bank...42 H Harness & Light Kit for ADC2220 Air Drill Cart (S/N Y1596-)...16 Harness & Light Kit for ADC2220 Air Drill Cart (S/N Y1597+)...18 Harness & Light Kit for ADC2350 Air Drill Cart (S/N Y1596-)...20 Harness & Light Kit for ADC2350 Air Drill Cart (S/N Y1597+)...22 Harrow Assembly Harrow Center Mount Harrow Wing Mount Hydraulic Cylinder ( C)...56 Hydraulic Cylinder ( C)...58 Hydraulic Cylinder ( C)...60 Hydraulic Cylinder ( C)...62 Hydraulic Shut-Off Valve ( C)...64 I Implement Kit...90 L Left Wing To Center...8 Lift Switch Mounting (ADC2350 Only)...24 M Monitor NTA Monitor NTA N NTA Control Valve (S/N Z1101+)...66 P Parallel Arm Dual Gauge Wheel...32 Parallel Arm Lift Assembly...34 Parallel Arm Opener...36 Pressure Reducing Valve ( C)...68 R Relief & Solenoid Valves...70 Relief Valve ( C)...72 Relief Valve ( C)...74 Right Wing To Center...10 S Slow Moving Vehicle Emblem...26 Solenoid Valve ( C)...76 Spring Scraper Assembly Stroke Control Valve ( C)...78 T Tower for ADC2220 Air Cart Drill...96 Tower for ADC2350 Air Cart Drill...98 Transport Hydraulics (RDIF Cartridge)...80 Transport Hydraulics (RPIL Cartridge)...82 W Weights ( S) /27/ P

4 P /27/17

5 12/27/ P

6 Center Frame To Rockshaft P /27/17

7 Center Frame To Rockshaft Frames Ref. Part No. Part Description Comments Revision dwg C C C C C H H C C C C C C C H C C C C H C C C C Image No. BOLT WHEEL 1/2-20X1 90-DEG HUB & SPINDLE 6 BOLT 4570 LB NUT HEX NYLOCK 5/8-11 PLT HHCS 5/8-11X3 3/4 GR5 GREASE ZERK STRAIGHT 1/4-28 NTA 35' ROCKSHAFT WELDMENT WING PIVOT PIN WELDMENT PIN ROLL 3/8 X 2 PLT SCREW RD HD X 1 PLT NTA CLUTCH/SOLENOID SWITCH WASHER FLAT #10 SAE PLT WASHER INTERNAL STAR #10 PLT NUT HEX PLT PIN HITCH 1 X 3 3/8 USABLE LG NTA35 TRANSPORT LOCK PIN CLEVIS 1 X 3 11/16 GR5 PLT CYL REP 4.75 X 12 X 50 ROD WASHER FLAT 1 SAE PIN COTTER 3/16 X 1 3/4 PLT NTA35 CENTERFRAME WELDMENT ELE. CLUTCH SWITCH CAM CLAMP BUSHING CYL 1 1/4 X 1 X 1 BUSHING SPINDLE 1 1/2X1 1/4X1 PIN CLEVIS 1 X 3 5/16 HRD PLT 12/27/ P

8 Left Wing To Center P /27/17

9 Left Wing To Center Frames Ref. Part No. Part Description Comments Revision dwg H C C C C C C D C C C C D C C H H C C C C D C C H Image No. WING PIVOT PIN WELDMENT PIN ROLL 3/8 X 2 PLT PIN COTTER 7/32 X 2 WASHER FLAT 1 1/4 SAE PLT PIN CLEVIS 1 1/4 X 3 3/8 GR5 NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT NTA MARKER FOLD CYL STOP HHCS 1/2-13X3 3/4 GR5 CYL 4.5X475X2 ROD NUT HEX 1-8 PLT WASHER LOCK SPRING 1 PLT NTA MARKER WING FOLD STOP HHCS 1-8X7 GR5 PIN HITCH 1 X 6 W/HAIRPIN NTA35 CENTERFRAME WELDMENT NTA35 LH WING WELDMENT GREASE ZERK STRAIGHT 1/4-28 BUSHING SPINDLE 1 1/2X1 1/4X1 HHCS 5/16-18X2 1/2 GR5 WASHER LOCK SPRING 5/16 PLT RPBY D HHCS 5/16-18X1 1/4 GR5 HOSE CLIP 13/16 ID NTA30 LH WING WELDMENT 12/27/ P

10 Right Wing To Center P /27/17

11 Right Wing To Center Frames Ref. Part No. Part Description Comments Revision dwg H C C C C C C D C C C C D C C H H C C C C D H Image No. WING PIVOT PIN WELDMENT PIN ROLL 3/8 X 2 PLT PIN COTTER 7/32 X 2 WASHER FLAT 1 1/4 SAE PLT PIN CLEVIS 1 1/4 X 3 3/8 GR5 NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT NTA MARKER FOLD CYL STOP HHCS 1/2-13X3 3/4 GR5 CYL 4.5X475X2 ROD NUT HEX 1-8 PLT WASHER LOCK SPRING 1 PLT NTA MARKER WING FOLD STOP HHCS 1-8X7 GR5 PIN HITCH 1 X 6 W/HAIRPIN NTA35 CENTERFRAME WELDMENT NTA35 RH WING WELDMENT GREASE ZERK STRAIGHT 1/4-28 BUSHING SPINDLE 1 1/2X1 1/4X1 HHCS 5/16-18X1 1/4 GR5 WASHER LOCK SPRING 5/16 PLT RPBY D NTA30 RH WING WELDMENT 12/27/ P

12 Cart Hook-Up for ADC2220 Air Drill Cart P /27/17

13 Cart Hook-Up for ADC2220 Air Drill Cart Frames Ref. Part No. Part Description Comments Revision dwg H C C H H C Image No. OUTER PULL LINK PIN PIN ROLL 3/8 X 2 PLT GREASE ZERK 1/4-28 X 90-DEG CENTER PULL LINK PIN NTA CARTLINK WELDMENT BUSHING SPINDLE 1 1/2X1 1/4X1 12/27/ P

14 Cart Hook-Up for ADC2350 Air Drill Cart P /27/17

15 Cart Hook-Up for ADC2350 Air Drill Cart Frames Ref. Part No. Part Description Comments Revision dwg H H C H C C C C C H C H Image No. NTA35 CENTERFRAME WELDMENT OUTER PULL LINK PIN PIN ROLL 3/8 X 2 PLT PULL BAR WELDMENT PIN HITCH 1 1/4 X 4 1/2 NUT HEX 5/8-11 PLT HHCS 5/8-11X1 GR5 NYL WASHER LOCK SPRING 5/8 PLT PIN COTTER 7/32 X 2 PULL LINK WELDMENT BUSHING SPINDLE 1 1/2X1 1/4X1 CENTER PULL LINK PIN 12/27/ P

16 Harness & Light Kit for ADC2220 Air Drill Cart (S/N Y1596-) P /27/17

17 Harness & Light Kit for ADC2220 Air Drill Cart (S/N Y1596-) Frames Ref. Part No. Part Description Comments Revision dwg16369 VA C C Image No. RPBY C PEDESTAL SAFETY LAMP AMBER PEDESTAL SAFETY LAMP RED 12/27/ P

18 Harness & Light Kit for ADC2220 Air Drill Cart (S/N Y1597+) P /27/17

19 Harness & Light Kit for ADC2220 Air Drill Cart (S/N Y1597+) Frames Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C C Image No. CABLE TIE 22.2 LONG REL. LIGHT HARNESS 12' WISHBONE LED NTA/CTA IMPLEMENT HARNESS ELE. CLUTCH SWITCH CAM CLAMP NTA CLUTCH/SOLENOID SWITCH SCREW RD HD X 1 PLT WASHER FLAT #10 SAE PLT WASHER INTERNAL STAR #10 PLT NUT HEX PLT PEDESTAL SAFETY LAMP RED - LED PEDESTAL SAFETY LAMP AMBER LED 12/27/ P

20 Harness & Light Kit for ADC2350 Air Drill Cart (S/N Y1596-) P /27/17

21 Harness & Light Kit for ADC2350 Air Drill Cart (S/N Y1596-) Frames Ref. Part No. Part Description Comments Revision dwg H C C C D C C C Image No. NTA35 CENTERFRAME WELDMENT LIGHT KIT ADC IMPLEMENT SCR HEX SELF TAP 1/4-20X1TYPEF WESBAR SNGL AG LAMP, AMBER/AMB WESBAR SNGL AG LAMP, RED/BLANK NUT HEX FLANGE 3/8-16 PLT NTA LIGHT BRACKET U-BOLT 3/8-16 X 6 1/32 X 5 PLT WASHER LOCK #6 SS WASHER FLAT #6 PLT 12/27/ P

22 Harness & Light Kit for ADC2350 Air Drill Cart (S/N Y1597+) P /27/17

23 Harness & Light Kit for ADC2350 Air Drill Cart (S/N Y1597+) Frames Ref. Part No. Part Description Comments Revision dwg H C C C C C D C Image No. NTA35 CENTERFRAME WELDMENT AG HARNESS, REAR 21' LED SNAP RING EXT 1/2 LIGHT, AMBER LAMP LED LIGHT, RED LAMP - LED NUT HEX FLANGE 3/8-16 PLT NTA LIGHT BRACKET U-BOLT 3/8-16 X 6 1/32 X 5 PLT 12/27/ P

24 Lift Switch Mounting (ADC2350 Only) P /27/17

25 Lift Switch Mounting (ADC2350 Only) Frames Ref. Part No. Part Description Comments Revision dwg C C C C D S C C C D C Image No. HHCS 5/16-18X3/4 GR5 WASHER LOCK SPRING 5/16 PLT WASHER FLAT 5/16 USS PLT WASHER FLAT #6 SAE PLT BRKT LIFT SWITCH 3PYP DJ SWITCH SPDT W/WISKER & WIRE WASHER LOCK #6 SS NUT HEX 6-32 SS SCREW PAN HD 6-32 X 1/2 SS PROXIMITY SENSOR MNT BRKT CTA IND. SENSOR M18X46 (S/N Z1809-) (S/N Z1810+) (S/N Z1810+) (S/N Z1810+) 12/27/ P

26 Slow Moving Vehicle Emblem P /27/17

27 Slow Moving Vehicle Emblem Frames Ref. Part No. Part Description Comments Revision dwg H C C C C C C C Image No. NTA35 CENTERFRAME WELDMENT WASHER LOCK SPRING 5/16 PLT HHCS 5/16-18X3/4 GR5 SMV MOUNTING BLADE NUT-HEX 1/4-20 PLT WASHER LOCK SPRING 1/4 PLT DECAL SLOW MOVING-GALV. BACKED SCREW RD HD 1/4-20 X 5/8 12/27/ P

28 Dual Gauge Wheel P /27/17

29 Dual Gauge Wheel Gauge Wheels Ref. Part No. Part Description Comments Revision dwg C H H C C C C C C H C H C C C C C C C C C C D C C C C C C K C C Image No. HUB 6 BOLT 4 5/8 PILOT 3600 LB NTA WING GAUGE WHEEL WLDMNT RH NTA WING GAUGE WHEEL WLDMNT LH GREASE ZERK STRAIGHT 1/4-28 PIN CLEVIS 1 X 3 1/8 GR5 PLT WASHER FLAT 1 SAE PIN COTTER 3/16 X 1 3/4 PLT CYL REP 4.25X12X5 ROD (TIE) PIN ROLL 3/8 X 2 PLT WING PIVOT PIN WELDMENT BUSHING CYL 1 1/4 X 1 X 1 NTA35 WING EYEBOLT WELDMENT NUT HEX JAM 1 1/4-7 PLT WASHER LOCK 1 1/4 SPRING PLT NUT HEX 1 1/4-7 PLT SEAL 2.56X625X.438 CR16289 BRG CONE 50ID LM BRG CUP LM HUB 6 BOLT 4 5/8 PILOT W/ CUPS BEARING CUP LM BEARING CONE LM BOLT WHEEL 1/2-20X1 90-DEG HUB GREASE CAP WASHER SPINDLE - 7/8 PIN COTTER 5/32 X 1 3/4 LG NUT HEX SLOTTED 7/8-14 PLT VALVE STEM TR415X.625X1 1/4 LG TIRE 11L-15SL 12 PLY TUBELESS WHEEL 15 DIA X 10 WIDE X 6 BLT TRANSPORT WHEEL & TIRE ASSY BUSHING SPINDLE 1 1/2X1 1/4X1 PIN CLEVIS 1 X 3 5/16 HRD PLT Includes items & 22 12/27/ P

30 Gauge Wheel And Tire P /27/17

31 Gauge Wheel And Tire Gauge Wheels Ref. Part No. Part Description Comments Revision dwg C K D C C D C C C C C C C C C D Image No. HFS 1/2-20X1 1/2 GR5 TRANSPORT WHEEL & TIRE ASSY HUB GREASE CAP NUT HEX SLOTTED 7/8-14 PLT PIN COTTER 3/16 X 1 1/4 PLT 7/8 SPINDLE WASHER, HARDENED BEARING CONE LM BEARING CUP LM HUB 6 BOLT 4570# W/CUPS PAINTD BRG CUP 2.89ODX.58WD #LM BRG CONE 62IDX.78WD#LM SEAL 875 ID X 3.00 OD QDS SPINDLE SGL 98X100 HUB 6 BOLT 4570# ASY LESS BLTS SPINDLE ASSY SGL 98X11 WHEEL REINFORCING RING Includes items 3-7,9,11,&12 12/27/ P

32 Parallel Arm Dual Gauge Wheel P /27/17

33 Parallel Arm Dual Gauge Wheel Gauge Wheels Ref. Part No. Part Description Comments Revision dwg C H C D C C C C C C C C C C C C C C D D C C C Image No. HUB & SPINDLE 6 BOLT 4570 LB RPBY H PIVOT THRUST WASHER NTA CASTER RETAINER CAP WASHER LOCK SPRING 1/2 PLT HHCS 1/2-13X1 1/4 GR5 STEEL BUSHING 3 1/4X3IDX3LONG BOLT WHEEL 1/2-20X1 90-DEG HHCS 5/8-11X3 3/4 GR5 NUT LOCK 5/8-11 PLT SPINDLE SGL 98X100 HUB 6 BOLT 4570# ASY LESS BLTS HUB 6 BOLT 4570# W/CUPS PAINTD BEARING CUP LM BRG CUP 2.89ODX.58WD #LM SEAL 875 ID X 3.00 OD QDS BRG CONE 62IDX.78WD#LM BEARING CONE LM HUB GREASE CAP 7/8 SPINDLE WASHER, HARDENED PIN COTTER 3/16 X 1 1/4 PLT NUT HEX SLOTTED 7/8-14 PLT DECAL CAUTION TIRES NOT A STEP Includes Includes Includes 14,15. 12/27/ P

34 Parallel Arm Lift Assembly P /27/17

35 Parallel Arm Lift Assembly Gauge Wheels Ref. Part No. Part Description Comments Revision dwg C C C C D D H A H H C C C C H C D D H C H C C C C C C C D C C D C Image No. HHCS 1-8X12 1/4 GR8 WASHER LOCK SPRING 1 PLT NUT HEX 1-8 PLT GREASE ZERK STRAIGHT 1/4-28 NTA CASTER ARM SPACER TUBE RR LIFT CSTR LINKARM SPACER TB CASTER PARALLEL ARM LARGE PVT CASTER ARM SINGLE REPLACEMENT REAR LIFT CASTER WELDMENT - RH REAR LIFT CASTER WELDMENT - LH PIN COTTER 3/16 X 1 3/4 PLT WASHER FLAT 1 SAE WASHER LOCK 1 1/4 SPRING PLT NUT HEX 1 1/4-7 PLT NTA REAR EYEBOLT WELDMENT BUSHING CYL 1 1/4 X 1 X 1 SPACER 5X032X5 REAR LIFT CASTER CYLINDER PIN SPRING ADJUSTMENT TOOL WELD PIN HAIR COTTER.148 WIRE CYLINDER LCK CHNL 1 1/2X11 1/2 PIN 3/8 X 3 USABLE LW/PIN BUSHING 1 7/8X1 5/8X1 1/2 SPLT BUSHING 1 1/2 X 1 1/4 X 1 1/2 PIN CLEVIS 1 X 3 11/16 GR5 PLT CYL REP 4.5X12X5 ROD 22.25L HHCS 1/2-13X2 GR5 WASHER FLAT 1/2 SAE PLT NTA CASTER PIVOT BOLT HOLDER WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT CASTER FIELD PLATE HHCS 1-8X13 5/8 GR8 Formerly H Formerly C Part for Field Update Kit Part for Field Update Kit 2nd rev. 1st rev. 2nd rev. 1st rev. 2nd rev. 1st rev. 12/27/ P

36 Parallel Arm Opener P /27/17

37 Parallel Arm Opener Openers Ref. Part No. Part Description Comments Revision dwg D D S S H H D D D D D H H C C C C C C C C C C C C C C C C C D C C D C C C C C C C H H H C D C S Image No. DD BRG FLANGE DUST COVER D.D. SLOTTED SCRAPER RPBY S PW ADJUSTMENT TRUNNION ASSY TOP PARALLEL ARM WELDMENT BOTTOM PARALLEL ARM WELDMENT SPRING ADJUST PLATE LH SPRING ADJUST PLATE RH SPRING ADJUST PIVOT TUBE REAR PARALLEL ARM PIVOT TUBE FRONT PARALLEL ARM PIVOT TUBE PARALLEL LINKAGE OPENER WELD PARALLEL ARM OPENER MOUNT SCREW HEX SLT10-16X1/2P.THD CT RHSNB 3/8-16X1 GR5 HHCS 3/8-16X3 1/2 GR5 HHCS 5/8-11X1 1/2 GR5 NYL HFS 1/2-13 X 5 1/2 HFS 1/2-13 X 5 1/4 NUT HEX 3/8-16 PLT NUT HEX FLG. LOCK 1/2-13 PLT. WASHER FLAT 3/8 SAE PLT WASHER LOCK SPRING 3/8 PLT WASHER MACH 19 X.63 X 18GA SPRING EXT 1 5/8OD X 6.6X.177 CASTING SPRING ADJUST PARALLEL ARM PIVOT BUSHING PLASTIC OPENER SEED TUBE RHSNB 5/8-11X4 GR5 U-BOLT 5/8-11 X 2 1/32 X 2 GR5 PARALLEL OPENER MOUNT PLATE WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT RPBY C PIN ROLL 5/32 X 5/8 PLT PRESS WHEEL ARM BUMPER OPENER TRUNION RPBY C SPRING.540 O.D.X 1 1/4 X.054W PIN CLEVIS 3/8 X 2 1/8 USABLE AIR DRILL DD OPNR HOSE BOOT TOP PARALLEL ARM OFFSET WELDMT BOTTOM PARALLEL ARM RH OFFSET BOTTOM PARALLEL ARM LH OFFSET OPENER SEED TUBE, PLASTIC HEX SEED FLAP MOUNTING CLIP SEED FLAP, RUBBER, SEED-LOK SEED FLAP & HEX CLIP, SEEDLOK Includes items 34, 35, 37, 38 and 39. S/N Z1118- also includes item 5. Model year (S/N Z1118-) Use only with C. (S/N Z1119+) Replaces C and 2nd rev. item 5. (S/N Z1118-) Use existing stock; 1st rev. Model year Model year Model year Model year /27/ P

38 Coulter (S/N Z1148-) P /27/17

39 Coulter (S/N Z1148-) Openers Ref. Part No. Part Description Comments Revision dwg S D E E E C C H C D D D C C D C C C C C C C V D D C S C C C C C C C C C C D C C D D C C Image No. RPBY A RPBY S FERT COULTER SWING ARM RPBY E FERT COULTER SWING ARM WASHER FLAT 1 1/4 SAE PLT PIN COTTER 1/4 X 2 PLT COULTER SPRING ROD WLDMT NUT HEX JAM 3/4-10 PLT SPRING 2.25 O.D. X.5 COIL SPRING ROD SLEEVE 1 1/8 OD COULTER SPRING WASHER GREASE ADAPT 1/4-28M X 1/4 TB BUSHING COULTER CASTING COULT. SPRING BAR HHCS 7/8-9X2 3/4 GR5 WASHER LOCK SPRING 7/8 PLT NUT HEX 7/8-9 PLT RHSNB 1/2-13X1 1/4 GR5 OIL-SEAL DOUBLE LIP BEARING CONE LM BEARING CUP LM COULTER HUB & CUP ASSY RPBY V HUB GREASE CAP GREASE ZERK STRAIGHT 1/4-28 COULTER HUB PACKAGE PIN COTTER 3/16 X 1 3/4 PLT COULTER BLADE FLUTED 17 COULTER BLADE 5/8 WAVY 17 COULTER BLADE 3/4 WAVY 5/8 WAVY TURBO BLADE WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT WASHER SPINDLE - 7/8 NUT HEX SLOTTED 7/8-14 PLT U-BOLT 5/8-11 X 4 1/32 X 4 COULTER CLAMP BAR NUT HEX 5/8-11 PLT SWING ARM BUSHING OFFSET COULTER MOUNT PLATE OFFSET COULTER BRKT F/LH BOX NUT HEX FLANGE LOCK 3/4-10 PLT HHCS 1/2-13X1 3/4 GR5 USED IN OFFSET COULTER ASSY Includes hub and items 19 and 22. USED IN OFFSET COULTER ASSY USED IN OFFSET COULTER ASSY 2nd rev. 1st rev. 2nd rev. Use existing stock; 1st rev. 2nd rev. 1st rev. 12/27/ P

40 Coulter (S/N Z1149+) P /27/17

41 Coulter (S/N Z1149+) Openers Ref. Part No. Part Description Comments Revision dwg S H D C C C C V D C C C C C C C C C C C D D C D C C C C C C C C D C C C D C Image No. CLTR CASTING ASSY CLTR SWING ARM WLMT OFFSET COULTER MOUNT PLATE EYE BOLT 3/4-10X14 3/4 LG SP COULTER SPRING GUIDE TUBE GREASE ADAPT 1/4-28M X 1/4 TB HHCS 7/8-9X2 3/4 GR5 COULTER HUB & CUP ASSY HUB GREASE CAP NUT HEX SLOTTED 7/8-14 PLT NUT HEX JAM 3/4-10 PLT NUT HEX 7/8-9 PLT BUSHING 1X3/4X1 1/8 FLG HD OIL-SEAL DOUBLE LIP BEARING CONE LM WASHER LOCK SPRING 7/8 PLT WASHER MACH 1 7/8X1 1/4X 14GA WASHER SPINDLE - 7/8 PIN COTTER 3/16 X 1 3/4 PLT SNAP RING EXT 1 1/4 HEAVY COULT. SPRING BAR SPRING 2.25 O.D. X.5 COIL SNAP RING 3/4 EXTERNAL HEAVY COULTER SPRING WASHER WASHER MACH 1 1/4X3/4X14GA RHSNB 1/2-13X1 1/4 GR5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT 18 INCH TURBO COULTER BLADE COULTER BLADE FLUTED 17 COULTER BLADE 5/8 WAVY 17 COULTER BLADE 3/4 WAVY COULTER CLAMP BAR WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT HHCS 3/8-16X6 1/2 GR5 OFFSET COULTER BRKT F/LH BOX U-BOLT 5/8-11 X 4 1/32 X 4 Factory Installed 12/27/ P

42 Grease Bank P /27/17

43 Grease Bank Openers Ref. Part No. Part Description Comments Revision dwg C C R C C C C C D Image No. GREASE ZERK STRAIGHT 1/8-27NPT AD PUSH 1/4 TUBE 1/8 FNPT TUBE NYLON 1/4OD X 062WL GREASE ADAPT 1/4-28M X 1/4 TB HFSS 1/4-20X1/2 GR5 WASHER FLAT 1/4 SAE PLT WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT GREASE BANK MOUNT 12/27/ P

44 1" x 12" Double "V" Press Wheel P /27/17

45 1" x 12" Double "V" Press Wheel Press Wheels Ref. Part No. Part Description Comments Revision dwg C C D C H C C C C C C C C Image No. HFS 1/2-13X3 3/4 GR5 SPTHD NUT HEX FLG. LOCK 1/2-13 PLT. PRESS WHEEL PIVOT TUBE PARALLEL ARM PIVOT BUSHING 98 1X12 PRESS WHEEL WELDMENT HHCS 5/8-11X1 1/2 GR5 WASHER LOCK SPRING 5/8 PLT 1 X 12 PRESS WHL ASSY-5203BRG HHCS 1/4-20X1 GR5 1 X 12 PRESS WHEEL RIM HALF TIRE RUBBER 1 X 12 BRG.63ID PRESS WHL ASY NUT HEX LOCK 1/4-20 FLG 12/27/ P

46 2" x 13" Single Press Wheel P /27/17

47 2" x 13" Single Press Wheel Press Wheels Ref. Part No. Part Description Comments Revision dwg C C D C D D C C C C C C C C Image No. HFS 1/2-13X3 3/4 GR5 SPTHD NUT HEX FLG. LOCK 1/2-13 PLT. PRESS WHEEL PIVOT TUBE PARALLEL ARM PIVOT BUSHING UNIVERSAL PW ARM MACH 2&3X13 RPBY D WASHER LOCK SPRING 5/8 PLT HHCS 5/8-11X2 1/2 GR5 2 X 13 PRESS WHEEL ASSEMBLY BRG.63ID PRESS WHL ASY HHFS 1/4-20 X 1 1/2 GR 5 NUT HEX LOCK 1/4-20 FLG 2 X 13 PRESS WHEEL RIM HALF 2 X 13 PRESS WHEEL TIRE 2nd rev. 1st rev. 12/27/ P

48 3" x 13" Single Press Wheel P /27/17

49 3" x 13" Single Press Wheel Press Wheels Ref. Part No. Part Description Comments Revision dwg C C D C D D C C C C C C C C Image No. HFS 1/2-13X3 3/4 GR5 SPTHD NUT HEX FLG. LOCK 1/2-13 PLT. PRESS WHEEL PIVOT TUBE PARALLEL ARM PIVOT BUSHING UNIVERSAL PW ARM MACH 2&3X13 RPBY D WASHER LOCK SPRING 5/8 PLT HHCS 5/8-11X2 1/2 GR5 3 X 13 PRESS WHEEL ASSEMBLY BRG.63ID PRESS WHL ASY HHFS 1/4-20 X 2 GR 5 NUT HEX LOCK 1/4-20 FLG 3 X 13 PRESS WHEEL RIM HALF 3 X 13 PRESS WHEEL TIRE 2nd rev. 1st rev. 12/27/ P

50 3" x 14" Peaked Single Press Wheel P /27/17

51 3" x 14" Peaked Single Press Wheel Press Wheels Ref. Part No. Part Description Comments Revision dwg C C D C D C C S C C C D C C V C D Image No. HFS 1/2-13X3 3/4 GR5 SPTHD NUT HEX FLG. LOCK 1/2-13 PLT. PRESS WHEEL PIVOT TUBE PARALLEL ARM PIVOT BUSHING 3 X 14 PRESS WHEEL ARM WASHER LOCK SPRING 5/8 PLT HHCS 5/8-11X3 GR5 3 X 14 PEAKED P.W. ASSEMBLY HHCS 5/16-18X2 3/4 GR5 BRG INS.63IDX57OD DBL LIP FLG TP LK 5/16-18ZNYCR 4X12 PW RIM HALF 3 X 14 RIM SPACER RING 3 X 14 PEAKED PRESS WHEEL TIRE 3 X 14 TIRE & RING ASSEMBLY LARGE SPACER TUBE SMALL SPACER TUBE 12/27/ P

52 Folding Hydraulics P /27/17

53 Folding Hydraulics Hydraulics Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C C D C C C C Image No. RPBY D EL 3/4MJIC 3/4MORB HH3/8R /4FJIC 3/4FJIC TE 3/4MJIC 3/4MORB 3/4MJIC EL 3/4FJIC 3/4MJIC NC POPPET SOLENOID VALVE HH3/8R /4FJIC 3/4FJIC HH3/8R /4FJIC 3/4FJIC HH3/8R /4FJIC 3/4FJIC CYL 4.5X475X2 ROD HH3/8R /4FJIC RPBY D HOSE CLIP 13/16 ID WASHER LOCK SPRING 5/16 PLT HHCS 5/16-18X1 1/4 GR5 HH3/8R /4MORB 3/4FJIC RF Refer to "Solenoid Valve ( C)" for breakdown Refer to "Hydraulic Cylinder ( C)" for breakdown 12/27/ P

54 Depth Stop Valve Assembly P /27/17

55 Depth Stop Valve Assembly Hydraulics Ref. Part No. Part Description Comments Revision dwg S D H D D H C C C C C C C C C C C C C H C C C C C C Image No. SCREW ADJUSTMENT ROD TENSION SPRING RETAINER DEPTH ADJUSTMENT BRACKET WLMT 1/4 SPACER TUBE 7/16 SPACER TUBE 2SNT DEPTH VALVE MNT WELDMENT RHSNB 1/4-20X3/4 GR5 HHCS 1/4-20X3 GR5 NUT-HEX 1/4-20 PLT HUT HEX NYLOCK 7/16-14 PLT WASHER LOCK SPRING 1/4 PLT WASHER FLAT 7/16 SAE PLT SPRING SCREW ADJ TENSION STRHT STROKE CONTROL VALVE RPBY C EL 3/4MJIC 3/4MORB KNOB P.W. ADJUSTMENT HHCS 3/4-10X6 GR5 SPRING LEVER 2SNT DPTH VAL CLEVIS PLT WLMT NUT HEX 3/4-10 PLT NYLOCK HHCS 3/8-16X3 3/4 GR5 WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT HHCS 3/8-16X5 1/2 GR5 AD 3/4MORB 3/4MJIC Refer to "Hydraulic Shut-Off Valve ( C)" Refer to "Stroke Control Valve ( C)" 2nd rev. 1st rev. 12/27/ P

56 Hydraulic Cylinder ( C) P /27/17

57 Hydraulic Cylinder ( C) Hydraulics Ref. Part No. Part Description Comments Revision dwg M7520 3R6912 4R6106 5R6120 6R6164 7M7320 2A0024 2A0019 2A0012 2A C Image No. ROD MIDWAY HEAD MIDWAY RPBY 4R6108 TUBE MIDWAY MW BASE TIE ROD MIDWAY WIPER SEAL O-RING BACK-UP O-RING BACK-UP TEFLON SEAL LOADER O-RING WEAR RING MW PISTON NUT 1-14 RPBY C RPBY C RPBY C SEAL KIT MW 4.25 RPHCYL 4A6104 Only available in item 20. Only available in item 20. Only available in item 20. Only available in item 20. Only available in item 20. Only available in item 20. Only available in item 20. Only available in item /27/ P

58 Hydraulic Cylinder ( C) P /27/17

59 Hydraulic Cylinder ( C) Hydraulics Ref. Part No. Part Description Comments Revision dwg M7018 2M8518 3R8512 4R8106 5R8120 6R8164 2A0025 2A0019 2A0012 2A C Image No. RPBY 1M7016-ADI MW ROD MIDWAY HEAD F/ 4 3/4 CYL PISTON MIDWAY MIDWAY TUBE MW BASE ROD WIPER BACK-UP O-RING TEFLON SEAL LOADER O-RING WEAR RING MW PISTON NUT 1 1/4'"-12 UNF RPBY C RPBY C RPBY C SEAL KIT MW 4.75 RPHCYL 4A8104 Only available in item 20. Only available in item 20. Only available in item 20. Only available in item 20. Only available in item 20. Only available in item /27/ P

60 Hydraulic Cylinder ( C) P /27/17

61 Hydraulic Cylinder ( C) Hydraulics Ref. Part No. Part Description Comments Revision dwg A0019 6R7170 7M7398 5M7595 2A0024 4M7108 3R7612 2M7690 2A0006 2A0012 1M C Image No. RPBY C MW BASE BACK-UP MIDWAY O-RING TIE ROD MIDWAY MW TUBE MW PISTON NUT 1-14 MW PISTON MW BACK-UP MW O-RING MW HEAD 4.5 X 16 X 2 U-CUP MW WIPER MW ROD RPBY C RPBY C MIDWAY ROD CLEVIS SEAL KIT MW 4.5 CYL 5A7116 Only available in item 18. Only available in item 18. Only available in item 18. Only available in item 18. Only available in item 18. Only available in item /27/ P

62 Hydraulic Cylinder ( C) P /27/17

63 Hydraulic Cylinder ( C) Hydraulics Ref. Part No. Part Description Comments Revision dwg M7018 2M7518 3R7512 4R7106 5R7120 6R7177 7M7320 2A0327 2A0024 2A0019 2A0012 2A C Image No. RPBY 1M7016-ADI MW ROD HEAD MIDWAY RPBY 4R7108 TUBE MIDWAY MW BASE TIE ROD MIDWAY MW WIPER U-CUP O-RING BACK-UP MIDWAY SEAL, TEFLON MIDWAY O-RING LOADER MIDWAY WEAR RING MIDWAY MW PISTON NUT 1-14 RPBY C RPBY C RPBY C SEAL KIT MW 4.5 RPHCYL 4A7104 Only available in item 19. Only available in item 19. Only available in item 19. Only available in item 19. Only available in item 19. Only available in item /27/ P

64 Hydraulic Shut-Off Valve ( C) P /27/17

65 Hydraulic Shut-Off Valve ( C) Hydraulics Ref. Part No. Part Description Comments Revision dwg C C Image No. SEAL KIT MONARCH STROKE CONTRL MONARCH ROD CAP MONARCH STROKE CONTROL VALVE RPBY C 12/27/ P

66 NTA Control Valve (S/N Z1101+) P /27/17

67 NTA Control Valve (S/N Z1101+) Hydraulics Ref. Part No. Part Description Comments Revision dwg C C C D C C C C C C C C C C C C C C C C C C C Image No. NUT HEX 3/8-16 PLT WASHER LOCK SPRING 3/8 PLT U-BOLT 3/8-16 X 4 1/32 X 2 3/4 NTA VALVE ASSY IMPLEMENT MNT NUT-HEX 1/4-20 PLT WASHER LOCK SPRING 1/4 PLT WASHER FLAT 1/4 SAE PLT VALVE PRESS RED W/ CHK 1/16 OR HH3/8R /4MORB 9/16FJIC AD 9/16MORB 9/16MJIC EL 9/16MJIC 9/16MORB AD 9/16FJIC 1/4FNPT PRESSURE GAUGE 2000 PSI HHCS 1/4-20X2 1/4 GR5 EL 3/4MORB 9/16MJIC EL 3/4MJIC 9/16MORB AD 3/4MORB 3/4FJIC VALVE 90 DEGREE SHUT-OFF AD 9/16MORB 9/16FJIC RELIEF VALVE 1500 PSI TAMP PRF HH3/8R /16FJIC TE 9/16MJIC 9/16MJIC 9/16MORB HH3/8R /4FJIC Refer to "Relief Valve ( C)" Refer to "Hydraulic Shut-Off Valve ( C)" 12/27/ P

68 Pressure Reducing Valve ( C) P /27/17

69 Pressure Reducing Valve ( C) Hydraulics Ref. Part No. Part Description Comments Revision dwg CP PRPIL-10-K-25 Image No. VALVE BODY PRV W/CHECK SHOEMKR SHOEMAKER ORIFACE REPLACED BY CP RPBY 5075 RPBY C CARTRIDGE PRESS RED SHOEMAKER 12/27/ P

70 Relief & Solenoid Valves P /27/17

71 Relief & Solenoid Valves Hydraulics Ref. Part No. Part Description Comments Revision dwg C C C C D C C C C Image No. RELIEF VALVE TAMP PROOF1300PSI WASHER FLAT 5/16 SAE PLT WASHER FLAT 1/4 SAE PLT NUT-HEX 1/4-20 PLT NTA SOLENOID VALVE MOUNT NC POPPET SOLENOID VALVE WASHER LOCK SPRING 1/4 PLT HHCS 5/16-18X2 1/2 GR5 WASHER FLAT 1/4 SAE PLT Refer to "Relief Valve ( C)" Refer to "Solenoid Valve ( C)" 12/27/ P

72 Relief Valve ( C) P /27/17

73 Relief Valve ( C) Hydraulics Ref. Part No. Part Description Comments Revision dwg16441 Image No SHOEMAKER BODY FOR C RDIF10F18/13.5 SHOEMAKER CARTRIDGE C SEAL KIT SHOEMAKER # /27/ P

74 Relief Valve ( C) P /27/17

75 Relief Valve ( C) Hydraulics Ref. Part No. Part Description Comments Revision dwg14738 Image No RELIEF VALVE BODY-SHOEMAKER SHOEMAKER O-RING SHOEMAKER BACK-UP BOTTOM SHOEMAKER O-RING SHOEMAKER BACK-UP RDIF-1O-F18/13 CARTRIDGE SHOEMAKER RLF 1300 RPILS-10-S25/13 CARTRIDGE SHOEMAKER RLF 1300 Check "Transport Hydraulics (RDIF Cartridge)" for new hose routing on new RDIF Cartridge 2nd rev. 1st rev. 12/27/ P

76 Solenoid Valve ( C) P /27/17

77 Solenoid Valve ( C) Hydraulics Ref. Part No. Part Description Comments Revision dwg C B Image No. NUT HEX JAM 1/2-20 PLT DELTA COIL 12VDC W CONN DELTA CARTRIDGE VALVE DELTA SERIES ES VAVLE BODY SEAL KIT 7/8-14 DELTA W/ LTITE 12/27/ P

78 Stroke Control Valve ( C) P /27/17

79 Stroke Control Valve ( C) Hydraulics Ref. Part No. Part Description Comments Revision dwg C Image No. BODY SHOEMAKER PISTON PLUG, ADAPTER, ASM. SEAL KIT C 12/27/ P

80 Transport Hydraulics (RDIF Cartridge) P /27/17

81 Transport Hydraulics (RDIF Cartridge) Hydraulics Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C C C C C C C C C C Image No. HH1/2R2 80 3/4MORB LIFT RELIEF VALVE TAMP PROOF1300PSI STROKE CONTROL VALVE RPBY C HH3/8R /4FJIC HH1/2R /4FJIC HH3/8R /4FJIC EL 3/4MJIC 3/4MORB HH3/8R /4FJIC CYL REP 4.75 X 12 X 50 ROD CYL REP 4.5X12X5 ROD 22.25L CYL REP 4.25X12X5 ROD (TIE) HH3/8R /4FJIC AD 3/4MORB 3/4MJIC TE 3/4MJIC 3/4MORB 3/4MJIC TE 3/4MORB 3/4MJIC 3/4MJIC HH3/8R2 38 3/4FJIC HH1/2R /4FJIC EL 3/4FJIC 3/4MJIC Refer to "Relief Valve ( C)" Refer to "Hydraulic Shut-Off Valve ( C)" Refer to "Hydraulic Shut-Off Valve ( C)" Refer to "Hydraulic Cylinder ( C)" Refer to "Hydraulic Cylinder ( C)" Refer to "Hydraulic Cylinder ( C)" 2nd rev. 1st rev. 12/27/ P

82 Transport Hydraulics (RPIL Cartridge) P /27/17

83 Transport Hydraulics (RPIL Cartridge) Hydraulics Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C C C C C C C C C C Image No. HH1/2R2 80 3/4MORB LIFT RELIEF VALVE TAMP PROOF1300PSI STROKE CONTROL VALVE RPBY C HH3/8R /4FJIC HH1/2R /4FJIC HH3/8R /4FJIC EL 3/4MJIC 3/4MORB HH3/8R /4FJIC CYL REP 4.75 X 12 X 50 ROD CYL REP 4.5X12X5 ROD 22.25L CYL REP 4.25X12X5 ROD (TIE) HH3/8R /4FJIC AD 3/4MORB 3/4MJIC TE 3/4MJIC 3/4MORB 3/4MJIC TE 3/4MORB 3/4MJIC 3/4MJIC HH3/8R2 38 3/4FJIC HH1/2R /4FJIC EL 3/4FJIC 3/4MJIC Refer to "Relief Valve ( C)" Refer to "Hydraulic Shut-Off Valve ( C)" Refer to "Hydraulic Shut-Off Valve ( C)" Refer to "Hydraulic Cylinder ( C)" Refer to "Hydraulic Cylinder ( C)" Refer to "Hydraulic Cylinder ( C)" 2nd rev. 1st rev. 12/27/ P

84 Blockage Monitor (Option) P /27/17

85 Blockage Monitor (Option) Monitor Ref. Part No. Part Description Comments Revision dwg C C C C C D C C C M C VA R C VA VA A A A A Image No. VANSCO BLOCK PKG NTA55ROWS 7.5 VANSCO BLOCK PKG NTA40ROWS 10 VANSCO BLOCK PKG NTA R VANSCO BLOCK PKG NTA R FRHSNB 1/4-20X4 3/4 GR5 BLOCKAGE MODULE MOUNTING BKT WASHER LOCK SPRING 1/4 PLT NUT-HEX 1/4-20 PLT CABLE TIE.19X D 50LB MANUAL BLOCK MONITOR INSTALL CABLE TIE.31X25 6DIA 120LB MAIN HARNESS LEAD WIRE 3 COND. 16GA RUBBER COVER TERM FEMALE INSUL PUSH ON.250 MULTIPLEX BLOCK MODULE LOWRATE BLOCKAGE PIN SENSOR - 4 FT NTA BLKG MONITOR PKG NTA BLKG MONITOR PKG NTA R BLKG MONITOR PKG NTA R BLKG MONITOR PKG NTA /2" spacing NTA " spacing NTA /2" spacing NTA " spacing 12/27/ P

86 Agtron Sensor (Option) (S/N Z1263-) P /27/17

87 Agtron Sensor (Option) (S/N Z1263-) Monitor Ref. Part No. Part Description Comments Revision dwg C A A A A Image No. AGTRON AR99 SEED FLOW SENSOR NTA AGTRON BLOCK PKG NTA AGTRON BLOCK PKG NTA AGTRON BLOCK PKG NTA AGTRON BLOCK PKG 12/27/ P

88 Agtron AGS25 Blockage Sensor (Option) (S/N Z1264+) P /27/17

89 Agtron AGS25 Blockage Sensor (Option) (S/N Z1264+) Monitor Ref. Part No. Part Description Comments Revision 2. dwg C C A A A A Image No. CLAMP WRM DRV #20SS (.81-75) AGTRON AGSS25 BLOCKAGE SENSOR NTA AGTRON BLOCK PKG NTA AGTRON BLOCK PKG NTA AGTRON BLOCK PKG NTA AGTRON BLOCK PKG 12/27/ P

90 Implement Kit P /27/17

91 Implement Kit Monitor Ref. Part No. Part Description Comments Revision dwg S Image No. 10' EXT HARNESS 3' REAR HITCH HARNESS DJ 6' HITCH EXTENSION DJ 2SOL YP24LIFT/HITCH FCM HRN PLNTR CNTRL OUTPUT MODULE(POM) NTA SOL INTERFACE EXT CABLE DJ SE SEED MAN 2-PIN CABLE PLG 12/27/ P

92 Monitor NTA P /27/17

93 Monitor NTA3010 Monitor Ref. Part No. Part Description Comments Revision dwg S S Image No. DJ 20' HARNESS EXT ISO SYS CAN INT AG HARNESS, WSMB MODULE INTAG WSMB/FLW MNTR MODULE 18R 10' EXT HARNESS 12 ROW HARNESS 5' EXT HARNESS DUST PLUG RECON II VIGILENSE BLOCKAGE SENSOR 25MM Rev. 1 Rev. 2 12/27/ P

94 Monitor NTA P /27/17

95 Monitor NTA3510 Monitor Ref. Part No. Part Description Comments Revision dwg S S Image No. DJ 20' HARNESS EXT ISO SYS CAN INT AG HARNESS, WSMB MODULE INTAG WSMB/FLW MNTR MODULE 18R 10' EXT HARNESS 12 ROW HARNESS DUST PLUG RECON II VIGILENSE BLOCKAGE SENSOR 25MM Rev. 1 Rev. 2 12/27/ P

96 Tower for ADC2220 Air Cart Drill P /27/17

97 Tower for ADC2220 Air Cart Drill Towers Ref. Part No. Part Description Comments Revision dwg C C R C C H C C C C C C C C C C C C C D C Image No. U-BOLT 1/2-13 X 4 1/32 X 5 1/4 U-BOLT 1/2-13 X 4 1/32 X 7 1/4 SEED HOSE 2 1/2 ID KANAFLEX 2 1/2 AIR HOSE BAND CLAMP U-BOLT 1/2-13 X 2 1/2 X 3 1/2 DESTRIBUTION TOWER WELDMENT WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT NUT HEX NYLOCK 5/16-18 PLT WASHER FLAT 5/16 USS PLT PVC SEED HOSE 1 IN/FT 11 OUTLET SEED DIST. RING 8 OUTLET SEED DIST. RING 9 OUTLET SEED DIST. RING 212 OUTLETSEED DIST. RING DIST TOWER DIVIDER RPBY D HHCS 5/16-18X3/4 GR5 HHCS 5/16-18X3 GR5 NTA35 DIST TOWER MOUNT WASHER LOCK SPRING 5/16 PLT 12/27/ P

98 Tower for ADC2350 Air Cart Drill P /27/17

99 Tower for ADC2350 Air Cart Drill Towers Ref. Part No. Part Description Comments Revision dwg C C R C C H C C C C C C C C C C C C D C C C C S C Image No. U-BOLT 1/2-13 X 4 1/32 X 5 1/4 U-BOLT 1/2-13 X 4 1/32 X 7 1/4 SEED HOSE 2 1/2 ID KANAFLEX 2 1/2 AIR HOSE BAND CLAMP U-BOLT 1/2-13 X 2 1/2 X 3 1/2 DESTRIBUTION TOWER WELDMENT WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT NUT HEX NYLOCK 5/16-18 PLT WASHER FLAT 5/16 USS PLT PVC SEED HOSE 1 IN/FT 16 OUTLET SEED DIST. RING 13 OUTLET SEED DIST. RING 10 OUTLET SEED DIST. RING DIST TOWER DIVIDER RPBY D HHCS 5/16-18X3/4 GR5 HHCS 5/16-18X3 GR5 NTA35 DIST TOWER MOUNT HFSS 3/8-16X3/4 LG HHCS 1/4-20X1 1/4 GR5 NUT-HEX 1/4-20 PLT WASHER LOCK SPRING 1/4 PLT INTAG WSMB/FLW MNTR MODULE 18R WASHER LOCK SPRING 5/16 PLT 12/27/ P

100 Decal Placement P /27/17

101 Decal Placement Decals Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C C C C C C C C C C C C C C C C C C C Image No. DECAL LIFT CYL OPERATING INSTR DECAL RED REFLECTOR DECAL AMBER REFLECTOR DECAL CAUTION TIRES NOT A STEP DECAL WARNING PINCH POINT GEN DECAL DANGER CHARGE FOLD CYL DECAL DANGER CRUSH AD/IMPLEM DECAL NOTICE TO OWNER-NO WARRA DECAL DANGER CANNOT READ ENG DECAL DANGER ELECTROCUTION AUG DECAL NOTICE FOLD IMP/CYL LOCK DECAL GREAT PLAINS W/LOGO DECAL WARNING HIGH PRESSUR SML DECAL SLOW MOVING-GALV. BACKED DECAL LOGO&GP F/STRIPE 4 X 24 DECAL 3 COLOR STRIPE 2.50 WIDE DECAL 4 COLOR STRIPE - 2 3/8 DECAL NTA3510 DECAL NTA3510 DECAL NTA3010 DECAL NTA3010 DECAL CAUTION TIRE 52 PSI DECAL SUMP DECAL SEL VALVE FOLD/FIELD DECAL NOTICE FOLD IMP/CYL LOCK DECAL REFLECTOR AMBER 1 1/2X9 DECAL REFLECTOR RED 1 1/2X9 DECAL REFLECTR DAYTIME 1 1/2X Refer to "Slow Moving Vehicle Emblem" for mounting hardware. This decal is located on each tire nd rev. 1st rev. 2nd rev. 1st rev. 2nd rev. 1st rev. 12/27/ P

102 Coulter Tine P /27/17

103 Coulter Tine Options Ref. Part No. Part Description Comments Revision dwg C D C C C C C D C C C Image No. HHCS 7/8-9X3 1/2 GR5 COULTER TINE MOUNT HHCS 5/8-11X4 1/2 GR5 HHCS 3/8-16X1 1/2 GR5 WASHER FLAT 3/8 USS PLT WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT COULTER TINE CLAMP PLATE 2SNT COULTER TINE WASHER LOCK SPRING 7/8 PLT NUT HEX 7/8-9 PLT 12/27/ P

104 Harrow Assembly P /27/17

105 Harrow Assembly Options Ref. Part No. Part Description Comments Revision dwg C C D C C H H D D D H C C C Image No. HHCS 5/16-18X2 1/4 GR5 WASHER FLAT 5/16 USS PLT SHEAR BUSHING 5/8X.357 NUT HEX NYLOCK 5/16-18 PLT SPRING HARROW DBL TORSION 11 20' FRAME WELDMENT NTA HARROW WING FRAME - 30' 14' TINE TUBE NTA HARROW TINE TUBE-35' WING NTA HARROW TINE TUBE - CTR CENTER BRACE WELDMENT NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT U-BOLT 1/2-13 X 1 3/8X2 3/4 LG All except NTA3010 wings. For NTA3010 wings. For NTA3010 wings. For NTA3510 wings. For all centers. 12/27/ P

106 Harrow Center Mount P /27/17

107 Harrow Center Mount Options Ref. Part No. Part Description Comments Revision dwg H C C H C C C K H C C C H Image No. NTA HARROW LH CENTER OS MNT HHCS 1/2-13X2 3/4 GR5 NUT HEX NYLOCK 1/2-13 NTA HARROW CENTER HANGER TUBE NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT U-BOLT 1/2-13 X 1 3/8X2 3/4 LG NTA HARROW CENTER ASSY NTA HARROW INNER CENTER MNT NUT HEX 5/8-11 PLT WASHER LOCK SPRING 5/8 PLT U-BOLT 5/8-11 X 6 1/32 X 5 3/4 NTA HARROW RH CENTER OS MNT 12/27/ P

108 Harrow Wing Mount P /27/17

109 Harrow Wing Mount Options Ref. Part No. Part Description Comments Revision dwg C C D H C C H C K K K Image No. NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT NTA HARROW WING MOUNT BRKT BAR NTA HARROW WING MOUNT HHCS 1/2-13X2 3/4 GR5 NUT HEX NYLOCK 1/2-13 NTA HARROW WING HANGER TUBE U-BOLT 1/2-13 X 1 3/8X2 3/4 LG NTA35 HARROW ASSY LH WING NTA35 HARROW ASSY RH WING NTA30 HARROW ASSY WING 12/27/ P

110 Spring Scraper Assembly P /27/17

111 Spring Scraper Assembly Options Ref. Part No. Part Description Comments Revision dwg C K7096 K7090 K7093 K C A Image No. HHCS 3/8-16X1 1/4 GR5 SPACER AND WASHER ASSEMBLY AIR DESIGN SCRAPER LH SIDE AIR DESIGN SCRAPER 15LB SPRING AIR DESIGN SCRAPER RH SIDE NUT HEX 3/8-16 PLT SPRING SCRAPER ASSEMBLY 12/27/ P

112 Weights ( S) P /27/17

113 Weights ( S) Options Ref. Part No. Part Description Comments Revision dwg S A C C C D D D C C Image No. NTA WEIGHT BRACKET ASSY NTA35 WEIGHT TUBE PAIR NUT LOCK 1/2-13 PLT WASHER FLAT 1/2 SAE PLT HHCS 1/2-13X1 1/2 GR5 NTA WEIGHT BRKT. BAR-LONG NTA WEIGHT BKT. BAR-SHORT NTA WEIGHT BRKT MOUNT HHCS 1-8X14 1/2 GR5 SPTHD NUT HEX TOP LOCK 1-8 PLT Includes items 5 thru 9 12/27/ P

114 Tower for ADC2220 Air Cart Drill P /27/17

115 Tower for ADC2220 Air Cart Drill Towers Ref. Part No. Part Description Comments Revision dwg C C R C C H C C C C C C C C C C C C C D C Image No. U-BOLT 1/2-13 X 4 1/32 X 5 1/4 U-BOLT 1/2-13 X 4 1/32 X 7 1/4 SEED HOSE 2 1/2 ID KANAFLEX 2 1/2 AIR HOSE BAND CLAMP U-BOLT 1/2-13 X 2 1/2 X 3 1/2 DESTRIBUTION TOWER WELDMENT WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT NUT HEX NYLOCK 5/16-18 PLT WASHER FLAT 5/16 USS PLT PVC SEED HOSE 1 IN/FT 11 OUTLET SEED DIST. RING 8 OUTLET SEED DIST. RING 9 OUTLET SEED DIST. RING 212 OUTLETSEED DIST. RING DIST TOWER DIVIDER RPBY D HHCS 5/16-18X3/4 GR5 HHCS 5/16-18X3 GR5 NTA35 DIST TOWER MOUNT WASHER LOCK SPRING 5/16 PLT 12/27/ P

116 Tower for ADC2350 Air Cart Drill P /27/17

117 Tower for ADC2350 Air Cart Drill Towers Ref. Part No. Part Description Comments Revision dwg C C R C C H C C C C C C C C C C C C D C C C C S C Image No. U-BOLT 1/2-13 X 4 1/32 X 5 1/4 U-BOLT 1/2-13 X 4 1/32 X 7 1/4 SEED HOSE 2 1/2 ID KANAFLEX 2 1/2 AIR HOSE BAND CLAMP U-BOLT 1/2-13 X 2 1/2 X 3 1/2 DESTRIBUTION TOWER WELDMENT WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT NUT HEX NYLOCK 5/16-18 PLT WASHER FLAT 5/16 USS PLT PVC SEED HOSE 1 IN/FT 16 OUTLET SEED DIST. RING 13 OUTLET SEED DIST. RING 10 OUTLET SEED DIST. RING DIST TOWER DIVIDER RPBY D HHCS 5/16-18X3/4 GR5 HHCS 5/16-18X3 GR5 NTA35 DIST TOWER MOUNT HFSS 3/8-16X3/4 LG HHCS 1/4-20X1 1/4 GR5 NUT-HEX 1/4-20 PLT WASHER LOCK SPRING 1/4 PLT INTAG WSMB/FLW MNTR MODULE 18R WASHER LOCK SPRING 5/16 PLT 12/27/ P