Parts Manual. NP1330, NP1340 and NP1540. Nutri-Pro 30' & 40' Pull Type. Copyright 2019 Printed 03/11/ P

Size: px

Start display at page:

Sydney Higgins
5 years ago
Views:

When you see this symbol, the subsequent instructions and warnings are serious - follow without exception.

1 Table of Contents Part Number Index Parts Manual Nutri-Pro 30' & 40' Pull Type NP1330, NP1340 and NP1540 Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! Cover illustration may show optional equipment not supplied with standard unit. Copyright 2019 Printed 03/11/ P

2 Table of Contents Table of Contents Part Number Index Section 1: Introduction...6 Using This Manual...6 Manual Replacement Information...6 Manual Revisions...6 Touch-up Paint...6 Hardware Legend...7 Replacement Hardware...7 Serial Numbers...7 Part Number Service Coding...7 Frame...8 Tongue to Frame (3 Section Frame)...8 Tongue to Frame for 3 Section frame 15" Coulter...10 Tongue to Frame for 5 Section Frame...12 Wing to Frame...14 Rear Lift Assist to Frame 3 Section (NP1330 & NP1340)..16 Rear Lift Assist to Frame (NP1540)...18 Rear Hitch...20 Weight Bracket Assembly NP1330, NP1340 & NP1540 NH³ Coulter...22 Wing Fold Sensor Mounting...24 Lift Sensor Mounting...26 LED Lights (NP1330 S/N B1088T-) (NP1340 & NP1540 S/N B1161U-)...28 LED Lights (NP1330 S/N B1089T+) (NP1340 & NP1540 S/N B1162U+)...30 Transport...32 Front Caster Wheel (11, 12, 13 & 15 Row)...32 Front Caster Wheel (25 & 31 Row)...36 Front Caster Wheel (NP Row) (NP & 17 Row)...40 Rear Lift Assist (11, 12, 13 & 15 Row)...44 Rear Lift Assist (25 & 31 Row)...46 Rear Lift Assist (NP Row) (NP & 17 Row)...48 Tire Scraper Field Kit ( K)...50 Shanks & Coulters...52 Spider Wheels & Disc Closer Assembly...52 Spring Shank Assembly...54 Spring Shank Mounting...56 Terra Tine Assembly LH & RH (Liquid Fertilizer Only)...58 Coulter Assembly...60 Liquid Fertilizer...62 Liquid Fertilizer Drive Mounting...62 Liquid Fertilizer Ground Drive...64 Fertilizer Plumbing...66 Visagauge Mounting...68 VisaGauge Valve Assembly ( D)...70 VisaGauge Valve Mounting Assembly (1 of 3)...72 VisaGauge Valve Mounting Assembly (2 of 3)...74 VisaGauge Valve Mounting Assembly (3 of 3)...76 Check Valve Mounting...78 Ball Valve Assembly ( C)...80 Banjo Strainer ( C)...82 Hydraulic Pump...84 Hydraulic Pump Assembly...86 John-Blue Pump ( C)...88 Variable Rate Kit w/ Hyd Pump...90 Anhydrous...92 Single & Dual Cooler Mounting...92 Single Cooler Assembly...94 Dual Cooler Assembly...98 Dual Cooler Assembly with Sectional Control Anhydrous Breakaway Coupler Anhydrous Coulter (NP1330 S/N B1088T-) Anhydrous Coulter (NP1330 S/N B1089T+) Anhydrous Coulter (NP1340 & NP1540 S/N B1154U-) Anhydrous Coulter (NP1340 & NP1540 S/N B1155U+) Anhydrous Outlet Assembly Eyewash Station for Anhydrous Only Hydraulics and 5 Section Frame Hydraulic Valve Mounting (NP1330 S/N B1084T-) (NP1340 &NP1540 S/N B1142U-) Section Fold & Down Pressure Hydraulics NP1330 (S/N B1084T-) Section Fold & Down Pressure Hydraulics NP1330 (S/N B1085T+) Section Fold & Down Pressure Hydraulics NP1340 (S/N B1142U-) Section Fold & Down Pressure Hydraulics NP1340 (S/N B1143U+) Section Pull Type Fold Hydraulics NP1540 (S/N B1142U-) Section Pull Type Fold Hydraulics NP1540 (S/N B1143U-B1162U) Section Pull Type Fold Hydraulics NP1540 (S/N B1163U+) Depth Stop Assembly Lift Hydraulics with Master Slave Hydraulic Bypass Valve ( C) Hydraulic Cylinder ( C) Hydraulic Cylinder ( C) Hydraulic Cylinder ( C) hydraulic Cylinder ( C) Hydraulic Cylinder ( C) Hydraulic Cylinder ( C) Hydraulic Cylinder ( C) Hydraulic Cylinder ( C) Copyright 2019 All rights reserved Printed 03/11/19 Great Plains Manufacturing, Inc. provides this publication as is without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. Great Plains Manufacturing, Incorporated Trademarks The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains All other brands and product names are trademarks or registered trademarks of their respective holders. Printed in the United States of America P /11/19

3 Table of Contents Part Number Index Table of Contents (continued) Part Number Index /11/ P

4 Table of Contents Alphabetized Table of Contents Part Number Index Selected Models 3 3 and 5 Section Frame Hydraulic Valve Mounting (NP1330 S/N B1084T-) (NP1340 &NP1540 S/N B1142U-) Section Fold & Down Pressure Hydraulics NP1330 (S/N B1084T-) Section Fold & Down Pressure Hydraulics NP1330 (S/N B1085T+) Section Fold & Down Pressure Hydraulics NP1340 (S/N B1142U-) Section Fold & Down Pressure Hydraulics NP1340 (S/N B1143U+) Section Pull Type Fold Hydraulics NP1540 (S/N B1142U-) Section Pull Type Fold Hydraulics NP1540 (S/N B1143U-B1162U) Section Pull Type Fold Hydraulics NP1540 (S/N B1163U+) A Anhydrous Breakaway Coupler Anhydrous Coulter (NP1330 S/N B1088T-) Anhydrous Coulter (NP1330 S/N B1089T+) Anhydrous Coulter (NP1340 & NP1540 S/N B1154U-) Anhydrous Coulter (NP1340 & NP1540 S/N B1155U+) Anhydrous Outlet Assembly B Ball Valve Assembly ( C)...80 Banjo Strainer ( C)...82 C Check Valve Mounting...78 Coulter Assembly...60 D Depth Stop Assembly Dual Cooler Assembly...98 Dual Cooler Assembly with Sectional Control E Eyewash Station for Anhydrous Only F Fertilizer Plumbing...66 Front Caster Wheel (11, 12, 13 & 15 Row)...32 Front Caster Wheel (25 & 31 Row)...36 Front Caster Wheel (NP Row) (NP & 17 Row)...40 h hydraulic Cylinder ( C) H Hydraulic Bypass Valve ( C) Hydraulic Cylinder ( C) Hydraulic Cylinder ( C) Hydraulic Cylinder ( C) Hydraulic Cylinder ( C) Hydraulic Cylinder ( C) Hydraulic Cylinder ( C) Hydraulic Cylinder ( C) Hydraulic Pump...84 Hydraulic Pump Assembly...86 J John-Blue Pump ( C)...88 L LED Lights (NP1330 S/N B1088T-) (NP1340 & NP1540 S/N B1161U-)...28 LED Lights (NP1330 S/N B1089T+) (NP1340 & NP1540 S/N B1162U+)...30 Lift Hydraulics with Master Slave Lift Sensor Mounting...26 Liquid Fertilizer Drive Mounting...62 Liquid Fertilizer Ground Drive...64 R Rear Hitch...20 Rear Lift Assist (11, 12, 13 & 15 Row)...44 Rear Lift Assist (25 & 31 Row)...46 Rear Lift Assist (NP Row) (NP & 17 Row)...48 Rear Lift Assist to Frame (NP1540)...18 Rear Lift Assist to Frame 3 Section (NP1330 & NP1340)..16 S Single & Dual Cooler Mounting...92 Single Cooler Assembly...94 Spider Wheels & Disc Closer Assembly...52 Spring Shank Assembly...54 Spring Shank Mounting...56 T Terra Tine Assembly LH & RH (Liquid Fertilizer Only)...58 Tire Scraper Field Kit ( K)...50 Tongue to Frame (3 Section Frame)...8 Tongue to Frame for 3 Section frame 15" Coulter...10 Tongue to Frame for 5 Section Frame...12 V Variable Rate Kit w/ Hyd Pump...90 Visagauge Mounting...68 VisaGauge Valve Assembly ( D)...70 VisaGauge Valve Mounting Assembly (1 of 3)...72 VisaGauge Valve Mounting Assembly (2 of 3)...74 VisaGauge Valve Mounting Assembly (3 of 3) P /11/19

5 Table of Contents Part Number Index Alphabetized Table of Contents (continued) W Weight Bracket Assembly NP1330, NP1340 & NP1540 NH³ Coulter...22 Wing Fold Sensor Mounting...24 Wing to Frame /11/ P

6 Table of Contents Part Number Index P /11/19

7 Table of Contents Part Number Index 03/11/ P

8 Table of Contents Tongue to Frame (3 Section Frame) Part Number Index (Applies to Nutri-Pro 1330, Nutri-Pro 1340 only) P /11/19

9 Table of Contents Part Number Index Frame Tongue to Frame (3 Section Frame) (Applies to Nutri-Pro 1330, Nutri-Pro 1340 only) Ref. Part No. Part Description Comments Revision dwg H H C C H H C C C D C C C C C C D C H D C C C C D C C C C H C A C C C C C C C C C Image No. NP30 CENTER FRAME 2 NP40 CENTER FRAME 2 PIN HITCH 1 7/16 X 8 3/8 PLT PIN COTTER.186 WIRE DIA RIPPER TONGUE NP40 TONGUE WELDMENT HHCS 5/16-18X3/4 GR5 WASHER LOCK SPRING 5/16 PLT HOSE CLIP 13/16 ID HYD HOSE CLAMP BRACKET SPRING HOSE LOOP HEAVY HHCS 1/2-13X1 GR5 WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1/2 USS PLT NUT HEX 1 1/4-7 PLT WASHER LOCK 1 1/4 SPRING PLT CASTING LARGE HITCH STRAP SAFETY CHAIN LB CLEVIS HITCH WELDMENT SAFETY CHAIN WASHER HHCS 1 1/4-7X10 GR5 SPTHD HHCS 1 1/4-7X9 GR5 SPTHD SCREW JACK 2000# TOP WND NUT HEX FLANGE 5/16-18 PLT HYD HOSE CLAMP LABEL RHSNB 5/16-18X1 1/4 GR5 NUT HEX 1-8 PLT WASHER LOCK SPRING 1 PLT CAT 5 PERFECT HITCH CAT 4 TO CAT 5 HITCH ADAPTER HHCS 1-8X7 1/2 GR5 CAT V HITCH ADAPTER KIT DECAL REFLECTOR AMBER 2X9 DECAL DANGER CANNOT READ ENG DECAL WARNING HIGH PRESSUR SML DECAL NUTRI-PRO DECAL DANGER ELECTROCUTION HA DECAL DANGER CRUSH TRCTR & 3PT DECAL CAUTION GENERAL INSTR DECAL WARNING 20 MPH TRANS SML DECAL CAUTION OPERATIONAL MACH 30' Used on all 40' models Includes items: /11/ P

10 Table of Contents Part Number Index Tongue to Frame for 3 Section frame 15" Coulter P /11/19

11 Table of Contents Part Number Index Frame Tongue to Frame for 3 Section frame 15" Coulter Ref. Part No. Part Description Comments Revision dwg C C C H H C C C D C C C C C C D C H D C C C C D H C H H C C C C C C C C C Image No. RHSNB 5/16-18X1 1/4 GR5 PIN HITCH 1 7/16 X 8 3/8 PLT PIN COTTER.186 WIRE DIA RIPPER TONGUE NP40 TONGUE WELDMENT HHCS 5/16-18X3/4 GR5 WASHER LOCK SPRING 5/16 PLT HOSE CLIP 13/16 ID HYD HOSE CLAMP BRACKET SPRING HOSE LOOP HEAVY HHCS 1/2-13X1 GR5 WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1/2 USS PLT NUT HEX 1 1/4-7 PLT WASHER LOCK 1 1/4 SPRING PLT CASTING LARGE HITCH STRAP SAFETY CHAIN LB CLEVIS HITCH WELDMENT SAFETY CHAIN WASHER HHCS 1 1/4-7X10 GR5 SPTHD HHCS 1 1/4-7X9 GR5 SPTHD SCREW JACK 2000# TOP WND NUT HEX FLANGE 5/16-18 PLT HYD HOSE CLAMP LABEL NP40 TONGUE MOUNT CAT 5 PERFECT HITCH NP40 CENTER FRAME WLDMNT NP30 CENTER FRAME WLDMNT DECAL REFLECTOR AMBER 2X9 DECAL DANGER CANNOT READ ENG DECAL WARNING HIGH PRESSUR SML DECAL NUTRI-PRO DECAL DANGER ELECTROCUTION HA DECAL DANGER CRUSH TRCTR & 3PT DECAL CAUTION GENERAL INSTR DECAL WARNING 20 MPH TRANS SML DECAL CAUTION OPERATIONAL MACH 30' Used on all 40' models 03/11/ P

12 Table of Contents Tongue to Frame for 5 Section Frame Part Number Index (Applies to Nutri-Pro 1540 only) P /11/19

13 Table of Contents Part Number Index Frame Tongue to Frame for 5 Section Frame (Applies to Nutri-Pro 1540 only) Ref. Part No. Part Description Comments Revision dwg C C C H C C C D C C C C C C D C H D C C C C D H C C C C C C C C C C Image No. RHSNB 5/16-18X1 1/4 GR5 PIN HITCH 1 7/16 X 8 3/8 PLT PIN COTTER.186 WIRE DIA NP40 TONGUE WELDMENT HHCS 5/16-18X3/4 GR5 WASHER LOCK SPRING 5/16 PLT HOSE CLIP 13/16 ID HYD HOSE CLAMP BRACKET SPRING HOSE LOOP HEAVY HHCS 1/2-13X1 GR5 WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1/2 USS PLT NUT HEX 1 1/4-7 PLT WASHER LOCK 1 1/4 SPRING PLT CASTING LARGE HITCH STRAP SAFETY CHAIN LB CLEVIS HITCH WELDMENT SAFETY CHAIN WASHER HHCS 1 1/4-7X10 GR5 SPTHD HHCS 1 1/4-7X9 GR5 SPTHD SCREW JACK 2000# TOP WND NUT HEX FLANGE 5/16-18 PLT HYD HOSE CLAMP LABEL NP4000 CENTER FRAME WELDMENT CAT 5 PERFECT HITCH DECAL REFLECTOR AMBER 2X9 DECAL DANGER CANNOT READ ENG DECAL WARNING HIGH PRESSUR SML DECAL NUTRI-PRO DECAL DANGER ELECTROCUTION HA DECAL DANGER CRUSH TRCTR & 3PT DECAL CAUTION GENERAL INSTR DECAL WARNING 20 MPH TRANS SML DECAL CAUTION OPERATIONAL MACH Shown and used on all 40' models 03/11/ P

14 Wing to Frame Table of Contents Part Number Index P /11/19

15 Wing to Frame Table of Contents Part Number Index Frame Ref. Part No. Part Description Comments Revision dwg H H C H H H H C C C C C C C C H H C Image No. NP40 CENTER FRAME 2 NP30 CENTER FRAME 2 BUSHING SPINDLE 1 1/2X1 1/4X1 WING PIVOT PIN WELDMENT NP30 WING FRAME GEN2 NP40 WING FRAME GEN2 BOLT ON WING FRAME GREASE ZERK STRAIGHT 1/4-28 PIN ROLL 3/8 X 2 PLT NUT HEX 5/8-11 PLT WASHER LOCK SPRING 5/8 PLT HHCS 5/8-11X2 GR5 BUSHING CYL 1 1/4 X 1 X 1 CYL 4X24X1.75 ROD(TIE) CYL 4.5X24X2 ROD (TIE ROD) BOLT-ON WING BOLT ON WING FRAME, 15 IN LONG PIN CLVS 1.25X3.38 USBL GR5 Refer to Hydraulic Cylinder ( C) for breakdown. - 5 Section frame Refer to Hydraulic Cylinder ( C0 for breakdown. 03/11/ P

16 Table of Contents Part Number Index Rear Lift Assist to Frame 3 Section (NP1330 & NP1340) (Applies to Nutri-Pro 1330, Nutri-Pro 1340 only) P /11/19

17 Table of Contents Part Number Index Frame Rear Lift Assist to Frame 3 Section (NP1330 & NP1340) (Applies to Nutri-Pro 1330, Nutri-Pro 1340 only) Ref. Part No. Part Description Comments Revision dwg H H C C C C C C C H C H H H C C H C S D D S D S C C Image No. NP30 WING REST NP40 WING REST NUT HEX 5/8-11 PLT WASHER LOCK SPRING 5/8 PLT HHCS 1-8X2 1/2 GR5 WASHER LOCK SPRING 1 PLT NUT HEX 1-8 PLT U-BOLT 5/8-11 X 6 1/32 X 7 3/4 HHCS 3/4-10X3 1/4 GR8 LA CLAMP MOUNT WELDMENT U-BOLT 5/8-11 X 6 1/32 X 5 3/4 LIFT ASSIST BRACE WELDMENT NP30 CENTER FRAME 2 NP40 CENTER FRAME 2 WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT LIFT ASSIST MOUNT CARRIER BUSHING CYL 1 1/4 X 1 X 1 LIFT ASSIST BRACE ASSY LA BRACE LH LA BRACE RH REAR BRACE ASSY REAR BRACE REAR BRACE ASSY NP WEIGHT TRANSFER INSTRUCTION DECAL CAUTION TIRE 60PSI/85FT Shown applies to NP30 Applies to NP40 Shown applies to NP30 Applies to NP40 Includes items 2-3 & Includes items 2-3, 10 & /11/ P

18 Table of Contents Rear Lift Assist to Frame (NP1540) Part Number Index (Applies to Nutri-Pro 1540 only) P /11/19

19 Table of Contents Part Number Index Frame Rear Lift Assist to Frame (NP1540) (Applies to Nutri-Pro 1540 only) Ref. Part No. Part Description Comments Revision dwg H H H C C C C C C C C C C C C C C H H S D D C H C Image No. NP4000 CENTER FRAME WELDMENT TRANSPORT REST WELDMENT II NP40 LIFT ASSIST FRAME WELD HHCS 1-8X2 1/2 GR5 WASHER LOCK SPRING 1 PLT NUT HEX 1-8 PLT HHCS 1 1/4-7X9 GR5 SPTHD PIN HITCH 3/4 X 5 1/4 USEABLE HHCS 5/8-11X1 3/4 GR5 NUT HEX 5/8-11 PLT WASHER LOCK SPRING 5/8 PLT U-BOLT 5/8-11 X 4 1/32 X 8 HHCS 3/4-10X3 1/4 GR8 WASHER LOCK 1 1/4 SPRING PLT NUT HEX 1 1/4-7 PLT WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT LA CLAMP MOUNT WELDMENT NP4000 LIFT ASSIST CLAMP WLDMT REAR BRACE ASSY LA BRACE RH LA BRACE LH U-BOLT 5/8-11 X 6 1/32 X 5 3/4 LA OFFSET CLAMP WELDMENT DECAL CAUTION TIRE 60PSI/85FT Used on 25 row 03/11/ P

20 Rear Hitch Table of Contents Part Number Index P /11/19

21 Rear Hitch Table of Contents Part Number Index Frame Ref. Part No. Part Description Comments Revision dwg C C C H C C C C C C C D C C H C C S C C C C C C SK13001 SK REKIT SK C H C H D C C C C C C Image No. U-BOLT 5/8-11 X 6 1/32 X 5 3/4 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT DROP HITCH WLDMNT U-BOLT 1/2-13 X 6 1/32 X 5 1/4 HHCS 1/2-13X1 3/4 GR5 NH3 BLEEDER VALVE NH3 HYDROSTATIC RELIEF VALVE FLO-MAX BREAK-AWAY COUPLER AD 1 1/4 MNPT X 1 3/4 ACME 1 3/4 ACME DUST CAP W/CHAIN BREAK AWAY COUPLER MOUNT WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT MOUNT HITCH SHUCK HHCS 1-8X2 1/2 GR5 HHCS 1-8X3 1/2 GR5 DRAWBAR PIVOT ASSEMBLY SCHUCK 850 CUSHION HITCH HHCS 1/2-13X2 GR5 WASHER FLAT 1/2 SAE PLT WASHER FLAT 1 SAE WASHER LOCK SPRING 1 PLT NUT HEX 1-8 PLT SCHUCK - VERTICAL BACK PIN SCHUCK - 1 SET OF 2 SPRINGS SCHUCK - REPAIR KIT SCHUCK - TONGUE HHCS 1-8X6 1/2 GR5 DRAWBAR PIVOT MOUNT NUT HEX 1-8 NYLON INSERT PLT DRAWBAR PIVOT MANUAL PAK MOUNT MANUAL PAK 2 1/4 THK U-BOLT 1/2-13 X 4 1/32 X 7 1/4 NUT HEX NYLOCK 1/4-20 DECAL GP PLANTING COMPONENTS HHCS 1/4-20X1 GR5 MINI END WHEEL PRESS WHEEL Only used with Anhydrous Only used with Anhydrous Only used with Anhydrous Only used with Anhydrous Only used with Anhydrous Only used with Anhydrous Only used with Anhydrous Only used with Anhydrous Only used with Anhydrous Only used with Anhydrous Includes items Includes items /11/ P

22 Table of Contents Part Number Index Weight Bracket Assembly NP1330, NP1340 & NP1540 NH³ Coulter P /11/19

23 Table of Contents Part Number Index Frame Weight Bracket Assembly NP1330, NP1340 & NP1540 NH³ Coulter Ref. Part No. Part Description Comments Revision dwg D D D D D C C C C C Image No. NTA WEIGHT BRKT. BAR-LONG NTA WEIGHT BRKT MOUNT WEIGHT MOUNTING PLATE WEIGHT PLATE, SHORT 3/4 WEIGHT PLATE, SHORT 1/4 HHCS 1-8X18 GR5 NUT HEX 5/8-11 PLT NUT HEX LOCK 1-8 PLT WASHER LOCK SPRING 5/8 PLT U-BOLT 5/8-11 X 4 1/32 X 8 03/11/ P

24 Table of Contents Wing Fold Sensor Mounting Part Number Index (Applies to Nutri-Pro 1540 only) P /11/19

25 Table of Contents Part Number Index Frame Wing Fold Sensor Mounting (Applies to Nutri-Pro 1540 only) Ref. Part No. Part Description Comments Revision dwg C C C C C D Image No. PROXIMTY SENSOR 24" CABLE TIE.31X28 8DIA 120LB WASHER MACH 1 7/8X1 1/4X 14GA HHCS 5/16-18X5/8 GR5 WASHER LOCK SPRING 5/16 PLT PROXIMITY SWITCH MNT 03/11/ P

26 Table of Contents Lift Sensor Mounting Part Number Index (Applies to Nutri-Pro 1540 only) P /11/19

27 Table of Contents Part Number Index Frame Lift Sensor Mounting (Applies to Nutri-Pro 1540 only) Ref. Part No. Part Description Comments Revision dwg C C C D C C C D C C Image No. PROXIMTY SENSOR 24" WASHER MACH 1 7/8X1 1/4X 14GA HHCS 5/16-18X3/4 GR5 PROXIMITY SWITCH MNT NUT HEX 5/16-18 PLT NUT HEX JAM 1-8 PLT WASHER LOCK SPRING 1 PLT SENSOR MOUNT WASHER FLAT 5/16 SAE PLT WASHER LOCK SPRING 5/16 PLT 03/11/ P

28 Table of Contents Part Number Index LED Lights (NP1330 S/N B1088T-) (NP1340 & NP1540 S/N B1161U-) P /11/19

29 Table of Contents Part Number Index Frame LED Lights (NP1330 S/N B1088T-) (NP1340 & NP1540 S/N B1161U-) Ref. Part No. Part Description Comments Revision dwg C C C C C C C D D C C C C C C C C C C D C C C C C C C C Image No. LIGHT HARNESS 18' WISHBONE LED LIGHT HARNESS, 5' LEAD - LED LIGHT HRNSS ENHANCE MODULE LED NUT HEX LOCK 1/4-20 FLG HHCS 1/4-20X1 1/2 GR5 DECAL REFLECTOR RED 2X9 DECAL REFLECTOR DAYTIME 2X9 LIGHT BRACKET MOUNT TUBE LH LIGHT BRACKET MOUNT TUBE RH CABLE TIE.31X21.5 6DIA 120LB CAP GA SQ. TUBE U-BOLT 1/4-20 X 2 9/32 X 3 GR2 LIGHT, AMBER LAMP LED LIGHT, RED LAMP - LED HHCS 1/2-13X3 1/2 GR5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT U-BOLT 3/8-16 X 6 1/32 X 5 PLT HHCS 1/4-20X3/4 GR5 HOSE AND HARNESS RETAINER 7-PIN CONNECTOR HOLDER WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT NUT HEX NYLOCK 1/4-20 AG LIGHT HARNESS, EXT-15' LED HARNESS EXT. 20' 4-PIN WP 03/11/ P

30 Table of Contents Part Number Index LED Lights (NP1330 S/N B1089T+) (NP1340 & NP1540 S/N B1162U+) (Applies to Nutri-Pro 1330 only) P /11/19

31 Table of Contents Part Number Index Frame LED Lights (NP1330 S/N B1089T+) (NP1340 & NP1540 S/N B1162U+) (Applies to Nutri-Pro 1330 only) Ref. Part No. Part Description Comments Revision dwg C C C D C C C D C C C D C C C D C C D D C C C C C C C C C C C D C C C C C Image No. U-BOLT 5/16-18X2 1/32X2 11/16 DECAL REFLECTOR RED 2X9 DECAL REFLECTOR DAYTIME 2X9 LIGHT BRACKET MOUNT TUBE LH DECAL REFLECTOR AMBER 2X9 WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT LIGHT MOUNT LIGHT, AMBER LAMP LED HHCS 1/4-20X1 1/4 GR5 HHCS 1/2-13X4 1/4 GR5 LIGHT BRACKET SPACER WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT U-BOLT 1/4-20 X 2 9/32 X 3 GR2 NP PT LIGHT BRACKET LH LIGHT, RED LAMP - LED NUT HEX NYLOCK 1/4-20 NP PT LIGHT BRACKET RH LIGHT BRACKET MOUNT TUBE RH HARNESS EXT. 20' 4-PIN WP AG LIGHT HARNESS, EXT-15' LED LIGHT HARNESS 18' WISHBONE LED LIGHT HARNESS, 7' LEAD - LED NUT HEX LOCK 1/4-20 FLG LIGHT HRNSS ENHANCE MODULE LED HHCS 3/8-16X3 1/4 GR5 CABLE TIE.31X21.5 6DIA 120LB ADHESIVE BACK CORD CLIP U-BOLT 3/8-16 X 6 1/32 X 5 PLT HHCS 1/4-20X3/4 GR5 HOSE AND HARNESS RETAINER 7-PIN CONNECTOR HOLDER WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT 03/11/ P

32 Table of Contents Part Number Index Front Caster Wheel (11, 12, 13 & 15 Row) P /11/19

33 Table of Contents Part Number Index Transport Front Caster Wheel (11, 12, 13 & 15 Row) Ref. Part No. Part Description Comments Revision dwg C C H C C C C D C H H C C C C C C C D C C C C H C C C C D C C H H C C D C D C D C H C C C C C C K C H C Image No. U-BOLT 3/4-10 X 6 1/32 X6 1/16 NUT HEX JAM 1 1/4-7 PLT HOSE LOOP W/ TAB NUT HEX 1 1/4-7 PLT WASHER LOCK 1 1/4 SPRING PLT PIN ROLL 5/16 X 1 1/2 PLT WASHER FLAT 1 USS PLT PIN CLEVIS 1 X 9.25 USEABLE BUSHING CYL 1 1/4 X 1 X 1 EYEBOLT WELDMENT CASTER MOUNT WMT WASHER FLAT 1 SAE WASHER LOCK SPRING 1 PLT NUT HEX 1-8 PLT WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT WASHER FLAT 3/4 SAE PLT DECAL WARNING HIGH PRESSUR LRG 40P CASTER INNER PIVOT TUBE CYL REP 4.50X10X1.5 ROD CYL REP 4.25X10X1.5 ROD CYL REP 4X10X1.38 ROD CYL REP 3.75X10X1.38 ROD 16R PARALLEL ARM WLDMNT GREASE ZERK STRAIGHT 1/4-28 BUSHING 1 7/8X1 5/8X1 1/2 SPLT HHCS 1/2-13X1 1/4 GR5 WASHER LOCK SPRING 1/2 PLT NTA CASTER RETAINER CAP STEEL BUSHING 3 1/4X3IDX3LONG PIN BENT.38X3.0 USBL W/PIN CYLINDER LOCK CHANNEL 1 1/2 X CASTER LOWER SWIVEL HHCS 3/4-10X4 GR5 FTHD NUT HEX JAM 3/4-10 PLT PLATE RND 3/16" THK 1 7/8" DIA SPRING COMP 1.88OD x.362w UHMW RND 2.0 DIA X 2.0 LONG DECAL CAUTION TRANSP. LOCK CASTER VERT SHAFT PIVOT THRUST WASHER REAR CASTER FRAME WELDMENT HHCS 3/4-10X8 GR5 PLT HHCS 3/4-10X2 1/4 GR5 DECAL CAUTION TIRE 60PSI/85FT TIRE SKID ST 265/70B16.5 NHS RIM16.5X8.25 6BLT 4.63PILT BKS VALVE STEM METAL TR-575 TUBLES LH TIRE/RIM265/70B16.5SKID6 BK BOLT, WHL 9/16-18X1 1/2 GR SPINDLE FOR 2.12 POS OFF BRG CONE 1.50ID 13600LA90028 TIMKEN CUPS Refer to Hydraulic Cylinder ( C) for breackdown. Refer to Hydraulic Cylinder ( C) for breackdown. Refer to Hydraulic Cylinder ( C) for breackdown. Refer to Hydraulic Cylinder ( C) for breackdown. 03/11/ P

34 Table of Contents Part Number Index Front Caster Wheel (11, 12, 13 & 15 Row) (continued) Ref Part No. H C D C K Part Description HUB 6 BOLT 4 5/8 PILOT GREASE ZERK 1/4-28 X 45-DEG SPINDLE SLEEVE NUT HEX JAM 1 1/2-12 PLT 2.12+OFF HUB/12.50 SPIN NON DR Comments Includes items Revision P /11/19

35 Table of Contents Part Number Index Transport Front Caster Wheel (11, 12, 13 & 15 Row) (continued) This Page Intentionally Left Blank 03/11/ P

36 Table of Contents Front Caster Wheel (25 & 31 Row) Part Number Index P /11/19

37 Table of Contents Part Number Index Transport Front Caster Wheel (25 & 31 Row) Ref. Part No. Part Description Comments Revision dwg C C H C C C C D C H H C C C C C C C D C C C C H C C C C D C C H H C C D C D C D C H C C H C C C C D C C C Image No. U-BOLT 3/4-10 X 6 1/32 X6 1/16 NUT HEX JAM 1 1/4-7 PLT HOSE LOOP W/ TAB NUT HEX 1 1/4-7 PLT WASHER LOCK 1 1/4 SPRING PLT PIN ROLL 5/16 X 1 1/2 PLT WASHER FLAT 1 USS PLT PIN CLEVIS 1 X 9.25 USEABLE BUSHING CYL 1 1/4 X 1 X 1 EYEBOLT WELDMENT HEAVY CASTER MOUNT WMT WASHER FLAT 1 SAE WASHER LOCK SPRING 1 PLT NUT HEX 1-8 PLT WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT WASHER FLAT 3/4 SAE PLT DECAL WARNING HIGH PRESSUR LRG 40P CASTER INNER PIVOT TUBE CYL REP 4.50X10X1.5 ROD CYL REP 4.25X10X1.5 ROD CYL REP 4X10X1.38 ROD CYL REP 3.75X10X1.38 ROD 16R PARALLEL ARM WLDMNT GREASE ZERK STRAIGHT 1/4-28 BUSHING 1 7/8X1 5/8X1 1/2 SPLT HHCS 1/2-13X1 1/4 GR5z e WASHER LOCK SPRING 1/2 PLT NTA CASTER RETAINER CAP STEEL BUSHING 3 1/4X3IDX3LONG PIN BENT.38X3.0 USBL W/PIN CYLINDER LOCK CHANNEL 1 1/2 X CASTER LOWER SWIVEL HHCS 3/4-10X4 GR5 FTHD NUT HEX JAM 3/4-10 PLT PLATE RND 3/16" THK 1 7/8" DIA SPRING COMP 1.88OD x.362w UHMW RND 2.0 DIA X 2.0 LONG DECAL CAUTION TRANSP. LOCK CASTER VERT SHAFT PIVOT THRUST WASHER REAR CASTER FRAME WELDMENT HHCS 3/4-10X8 GR5 PLT DECAL CAUTION TIRE 90 PSI/300 LA CASTER ARM HHCS 3/8-16X2 GR5 PIN COTTER 1/4 X 2 1/2 PLT NUT HEX SLOTTED 1 1/2-12 PLT WASHER MACH 2 1/2X1 3/4X10GA BRG NUT LOCK PLATE WASHER FLAT 3/8 SAE PLT NUT LOCK 3/8-16 PLT HHCS 3/8-16X1 3/4 GR5 Refer to Hydraulic Cylinder ( C) for breakdown. Refer to Hydraulic Cylinder ( C) for breakdown. Refer to Hydraulic Cylinder ( C) for breakdown. Refer to Hydraulic Cylinder ( C) for breakdown. 03/11/ P

38 Table of Contents Part Number Index Front Caster Wheel (25 & 31 Row) (continued) Ref Part No H C C K C C C D C C C HDA C C D C C D H C Part Description NP4000 LA AXLE WLDMT TIRE SKID ST NHS RIM 16.5X9.75 8BLT 6 PLT BKSKN TIRE ASSY NHS RH BKSKN NUT HEX FLANGE 5/8-18 PLT NUT HEX FLANGE 5/8-18 PLT SET SCREW 3/8-24X3/8 THREADED AXLE SPACER SEAL 3.375X2.250X.438 CR BRG CONE 1.75ID BRG CUP CTD HD820 HUB GREASE ZERK 1/4-28 X 45-DEG HUB STUD 5/8-18X2 1/4 GR5 AXLE SPACER HUB ASSY 8 BLT 6" PILOT HHCS 3/4-10X6 1/2 GR8 EXTENSION BOLT PLATE GAUGE WHEEL EXTENSION ASY DECAL, NOTICE CHECK TORQUE Comments Includes items 52 & 53. Includes items Used with 25 Row only. Revision P /11/19

39 Table of Contents Part Number Index Transport Front Caster Wheel (25 & 31 Row) (continued) This Page Intentionally Left Blank 03/11/ P

40 Table of Contents Part Number Index Front Caster Wheel (NP Row) (NP & 17 Row) P /11/19

41 Table of Contents Part Number Index Transport Front Caster Wheel (NP Row) (NP & 17 Row) Ref. Part No. Part Description Comments Revision dwg C C H C C C C D C H H C C C C C C C D C C C C H C C C C D C C H H C C D C D C D C H C C C H C C D K C C C Image No. U-BOLT 3/4-10 X 6 1/32 X6 1/16 NUT HEX JAM 1 1/4-7 PLT HOSE LOOP W/ TAB NUT HEX 1 1/4-7 PLT WASHER LOCK 1 1/4 SPRING PLT PIN ROLL 5/16 X 1 1/2 PLT WASHER FLAT 1 USS PLT PIN CLEVIS 1 X 9.25 USEABLE BUSHING CYL 1 1/4 X 1 X 1 EYEBOLT WELDMENT CASTER MOUNT WMT WASHER FLAT 1 SAE WASHER LOCK SPRING 1 PLT NUT HEX 1-8 PLT WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT WASHER FLAT 3/4 SAE PLT DECAL WARNING HIGH PRESSUR LRG 40P CASTER INNER PIVOT TUBE CYL REP 4.50X10X1.5 ROD CYL REP 4.25X10X1.5 ROD CYL REP 4X10X1.38 ROD CYL REP 3.75X10X1.38 ROD 16R PARALLEL ARM WLDMNT GREASE ZERK STRAIGHT 1/4-28 BUSHING 1 7/8X1 5/8X1 1/2 SPLT HHCS 1/2-13X1 1/4 GR5z e WASHER LOCK SPRING 1/2 PLT NTA CASTER RETAINER CAP STEEL BUSHING 3 1/4X3IDX3LONG PIN BENT.38X3.0 USBL W/PIN CYLINDER LOCK CHANNEL 1 1/2 X CASTER LOWER SWIVEL HHCS 3/4-10X4 GR5 FTHD NUT HEX JAM 3/4-10 PLT PLATE RND 3/16" THK 1 7/8" DIA SPRING COMP 1.88OD x.362w UHMW RND 2.0 DIA X 2.0 LONG DECAL CAUTION TRANSP. LOCK CASTER VERT SHAFT PIVOT THRUST WASHER HVY REAR CASTER WELDMENT HHCS 3/4-10X8 GR5 PLT DECAL CAUTION TIRE 75PSI/125- HHCS 3/8-16X1 3/4 GR5 NP40 AXLE WELDMENT NUT LOCK 3/8-16 PLT WASHER FLAT 3/8 SAE PLT BRG NUT LOCK PLATE TIRE ASSY NHS LH BKSKN WASHER MACH 2 1/2X1 3/4X10GA NUT HEX SLOTTED 1 1/2-12 PLT PIN COTTER 1/4 X 2 1/2 PLT Refer to Hydraulic Cylinder ( C) for breackdown. Refer to Hydraulic Cylinder ( C) for breackdown. Refer to Hydraulic Cylinder ( C) for breackdown. Refer to Hydraulic Cylinder ( C) for breackdown. Includes items /11/ P

42 Table of Contents Part Number Index Front Caster Wheel (NP Row) (NP & 17 Row) (continued) Ref Part No C C C C D C C C HDA C C D C C C H H Part Description NUT HEX FLANGE 5/8-18 PLT TIRE NHS VALVE STEM METAL TR-575 TUBLES WHEEL 16.5X8.258-BOLT 6.0 BKSN NP40 AXLE SPACER SEAL 3.375X2.250X.438 CR BRG CONE 1.75ID BRG CUP CTD HD820 HUB GREASE ZERK 1/4-28 X 45-DEG HUB STUD 5/8-18X2 1/4 GR5 NP40 AXLE SPACER THREADED SET SCREW 3/8-24X3/8 BRG LOCK NUT TN-11 HUB ASSY 8 BLT 6" PILOT WIDE SET BACK WMT 5" U-SHAPE SET BACK WMT 5" U-SHAPE Comments Includes items Revision P /11/19

43 Table of Contents Part Number Index Transport Front Caster Wheel (NP Row) (NP & 17 Row) (continued) This Page Intentionally Left Blank 03/11/ P

44 Table of Contents Rear Lift Assist (11, 12, 13 & 15 Row) Part Number Index P /11/19

45 Table of Contents Part Number Index Transport Rear Lift Assist (11, 12, 13 & 15 Row) Ref. Part No. Part Description Comments Revision dwg C H C C H C C H C C C C C C C H D C C C C C H C C K C C C C H C H C D C K H C D C C Image No. HHCS 3/4-10X3 1/4 GR8 LA CLAMP MOUNT WELDMENT DECAL WARNING HIGH PRESSUR LRG NUT HEX JAM 1 1/4-7 PLT HOSE LOOP W/ TAB NUT HEX 1 1/4-7 PLT WASHER LOCK 1 1/4 SPRING PLT EYEBOLT WELDMENT BUSHING CYL 1 1/4 X 1 X 1 CYL REP 5X10X1.5 ROD CYL REP 4.75X10X1.5 ROD DECAL REFLECTOR AMBER 2X9 DECAL CAUTION TRANSP. LOCK WASHER FLAT 3/4 USS PLT NUT HEX 3/4-10 PLT GAUGE WHEEL MOUNT WMT AXLE TUBE BUSHING MACH. GREASE ZERK STRAIGHT 1/4-28 HHCS 5/8-11X2 1/4 GR5 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT HHCS 3/4-10X2 1/4 GR5 FRONT GW STRADDLE ARM WELD DECAL CAUTION TIRE 60PSI/85FT WASHER LOCK SPRING 3/4 PLT LH TIRE/RIM265/70B16.5SKID6 BK TIRE SKID ST 265/70B16.5 NHS RIM16.5X8.25 6BLT 4.63PILT BKS VALVE STEM METAL TR-575 TUBLES BOLT, WHL 9/16-18X1 1/2 GR SPINDLE FOR 2.12 POS OFF BRG CONE 1.50ID 13600LA90028 TIMKEN CUPS HUB 6 BOLT 4 5/8 PILOT GREASE ZERK 1/4-28 X 45-DEG SPINDLE SLEEVE NUT HEX JAM 1 1/2-12 PLT 2.12+OFF HUB/12.50 SPIN NON DR REAR LIFT LIGHT EXTENDED WMT WASHER FLAT 1 USS PLT PIN 1 X 9.25 USEABLE PIN ROLL 5/16 X 1 1/2 PLT DECAL, NOTICE CHECK TORQUE Refer to Hydraulic Cylinder ( C) for breakdown. Refer to Hydraulic Cylinder ( C) for breakdown. Includes items Includes items /11/ P

46 Table of Contents Rear Lift Assist (25 & 31 Row) Part Number Index P /11/19

47 Table of Contents Part Number Index Transport Rear Lift Assist (25 & 31 Row) Ref. Part No. Part Description Comments Revision dwg C H C C H C C H C C C C C C D C C C H C C H K C C H C C D C C C C C C D C C C HDA C C D C C C H D C C C Image No. HHCS 3/4-10X3 1/4 GR8 LA CLAMP MOUNT WELDMENT DECAL WARNING HIGH PRESSUR LRG NUT HEX JAM 1 1/4-7 PLT HOSE LOOP W/ TAB NUT HEX 1 1/4-7 PLT WASHER LOCK 1 1/4 SPRING PLT EYEBOLT WELDMENT BUSHING CYL 1 1/4 X 1 X 1 DECAL REFLECTOR AMBER 2X9 DECAL CAUTION TRANSP. LOCK WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT GREASE ZERK STRAIGHT 1/4-28 AXLE TUBE BUSHING MACH. HHCS 5/8-11X2 1/4 GR5 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT HVY GAUGE WHEEL MOUNT WMT CYL REP 5X10X1.5 ROD CYL REP 4.75X10X1.5 ROD FRONT WIDE GW ARM WLDMT R TIRE ASSY NHS RH BKSKN DECAL CAUTION TIRE 90 PSI/300 HHCS 3/8-16X1 3/4 GR5 FRONT GW AXLE WELD. NUT LOCK 3/8-16 PLT WASHER FLAT 3/8 SAE PLT BRG NUT LOCK PLATE PIN COTTER 1/4 X 2 1/2 PLT WASHER MACH 2 1/2X1 3/4X10GA NUT HEX SLOTTED 1 1/2-12 PLT TIRE SKID ST NHS RIM 16.5X9.75 8BLT 6 PLT BKSKN HUB STUD 5/8-18X2 1/4 GR5 AXLE SPACER SEAL 3.375X2.250X.438 CR BF PRECISION CST METER COVER BRG CUP CTD HD820 HUB GREASE ZERK 1/4-28 X 45-DEG NUT HEX FLANGE 5/8-18 PLT THREADED AXLE SPACER SET SCREW 3/8-24X3/8 BRG LOCK NUT TN-11 HUB ASSY 8 BLT 6" PILOT REAR LIFT EXTENDED HEAVY WMT PIN 1 X 9.25 USEABLE WASHER FLAT 1 USS PLT PIN ROLL 5/16 X 1 1/2 PLT DECAL, NOTICE CHECK TORQUE Refer to Hydraulic Cylinder ( C) for breakdown. Refer to Hydraulic Cylinder ( C) for breakdown. Includes items 32 & 33. Includes items /11/ P

48 Table of Contents Part Number Index Rear Lift Assist (NP Row) (NP & 17 Row) P /11/19

49 Table of Contents Part Number Index Transport Rear Lift Assist (NP Row) (NP & 17 Row) Ref. Part No. Part Description Comments Revision dwg C H C C H C C H C C C C C C C H D C C C C H C C H C C D C C C C C C C K D C C C C HDA C C D C C H C D C C Image No. HHCS 3/4-10X3 1/4 GR8 LA CLAMP MOUNT WELDMENT DECAL WARNING HIGH PRESSUR LRG NUT HEX JAM 1 1/4-7 PLT HOSE LOOP W/ TAB NUT HEX 1 1/4-7 PLT WASHER LOCK 1 1/4 SPRING PLT EYEBOLT WELDMENT BUSHING CYL 1 1/4 X 1 X 1 CYL REP 5X10X1.5 ROD CYL REP 4.75X10X1.5 ROD DECAL REFLECTOR AMBER 2X9 DECAL CAUTION TRANSP. LOCK WASHER FLAT 3/4 USS PLT NUT HEX 3/4-10 PLT GAUGE WHEEL MOUNT WMT AXLE TUBE BUSHING MACH. GREASE ZERK STRAIGHT 1/4-28 HHCS 5/8-11X2 1/4 GR5 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT HVY FRONT GW STRADDLE ARM DECAL CAUTION TIRE 60PSI/85FT HHCS 3/8-16X1 3/4 GR5 NP40 AXLE WELDMENT NUT LOCK 3/8-16 PLT WASHER FLAT 3/8 SAE PLT BRG NUT LOCK PLATE WASHER MACH 2 1/2X1 3/4X10GA NUT HEX SLOTTED 1 1/2-12 PLT PIN COTTER 1/4 X 2 1/2 PLT NUT HEX FLANGE 5/8-18 PLT TIRE NHS WHEEL 16.5X8.258-BOLT 6.0 BKSN VALVE STEM METAL TR-575 TUBLES TIRE ASSY NHS LH BKSKN NP40 AXLE SPACER SEAL 3.375X2.250X.438 CR BRG CONE 1.75ID BRG CUP GREASE ZERK 1/4-28 X 45-DEG CTD HD820 HUB HUB STUD 5/8-18X2 1/4 GR5 HUB ASSY 8 BLT 6" PILOT NP40 AXLE SPACER THREADED SET SCREW 3/8-24X3/8 BRG LOCK NUT TN-11 REAR LIFT LIGHT EXTENDED WMT WASHER FLAT 1 USS PLT PIN 1 X 9.25 USEABLE PIN ROLL 5/16 X 1 1/2 PLT DECAL, NOTICE CHECK TORQUE Refer to Hydraulic Cylinder ( C) for breakdown. Refer to Hydraulic Cylinder ( C) for breakdown. Includes items Includes items /11/ P

50 Table of Contents Tire Scraper Field Kit ( K) Part Number Index P /11/19

51 Table of Contents Part Number Index Transport Tire Scraper Field Kit ( K) Ref. Part No. Part Description Comments Revision dwgtp C C C C D C D C C C D C C C H K Image No. PLOW 7/16-14X1 3/4 GR5 SWEEP 11 REGULAR NUT HEX FLG LOCK 1/2-13 PLT WASHER FLAT 1/2 SAE PLT SHANK MOUNT NUT HEX LOCK 1/4-20 FLG SCRAPER PIVOT MUFFLER CLAMP 1 1/2 SIZE NUT HEX NYLOCK 7/16-14 PLT RHSNB 1/2-13X1 1/2 GR5 MOUNT PLT WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT HHCS 1/2-13X1 1/4 GR5 NP TIRE SCRAPER MNT NP TIRE SCRAPER FIELD KIT Includes parts /11/ P

52 Table of Contents Part Number Index Spider Wheels & Disc Closer Assembly P /11/19

53 Table of Contents Part Number Index Shanks & Coulters Spider Wheels & Disc Closer Assembly Ref. Part No. Part Description Comments Revision dwg S C C S C C BO C C C C C C C S C S C C D D C S S S H C C C H C C C C C D D C C H C H C C Image No. CLOSING WHEEL ARM ASSY HHCS 1/2-13X1 1/4 GR5 NUT HEX NYLOCK 1/ " NOTCHED DISC SEALER ASSY TINE GAUGE WHEEL HUB SEAL BRG CONE 1.00ID L44643 NEILSON STUD 1/2-20UNFX1 13/16 BRG CUP 1.98OD L44610 RELIABLE HUB 4 BOLT TINE GW HUB WASHER FLAT 3/4 SAE PLT NUT HEX SLOTTED 3/4-16 GREASE CAP # IN 4-BOLT DISC NUT LUG 1/2-20X60DEG PLT(.75AF 16" DISC SEALER ASM W/HRDWARE NUT LOCK 5/8-11 PLT RH 45 DEG TOOTH WHEEL ASM BRG.63ID PRESS WHL ASY SNAP RING INT 40 MM 1/4 PW SPACER 5/8 DIA CLOSING DISC ARM HHCS 5/8-11X3 1/4 GR5 RH SPIDER CLOSER ASSY W/HRDWR LH 45 DEG TOOTH WHEEL ASM LH SPIDER CLOSER ASSY W/HRDWR CLOSING WHEEL ARM PIN CLEVIS 1/2 X 2 1/2 PLT PIN COTTER 1/8 X 1 1/4 PLT PIN CLEVIS 1/2 X 3 1/2 PLT SPRING ADJUSTMENT ASM SPRING EXT 1 7/8ODX8 3/8X.25W GREASE ZERK STRAIGHT 1/4-28 WASHER FLAT 1/2 SAE PLT NUT LOCK 1/2-13 PLT NUT HEX NYLOCK 1/2-13 PIVOT TUBE NPA CLOSER MOUNT PLATE HHCS 1/2-13X3 3/4 GR5 PIN COTTER 5/32 X 1 PLT CLOSER ARM MOUNT HHCS 1/2-13X3 1/2 GR5 CLOSING DISC WHEEL ARM IN 4-BOLT NOTCHED DISC HHCS 1/2-13X1 1/2 GR5 Includes items & 41 Includes items 5-13, 15, 40, 43 & 44 Includes items 5-9, 13 & 15 Includes items 5-15, 40 & 43 Includes items 2, 3 & Include items 2, 3, 17, & 25 03/11/ P

54 Table of Contents Spring Shank Assembly Part Number Index P /11/19

55 Table of Contents Part Number Index Shanks & Coulters Spring Shank Assembly Ref. Part No. Part Description Comments Revision dwg D H H H D C C C C C C C C C C C C C H H H H Image No. SHANK BAR CLAMP SPRING SHANK MOUNT WELDMENT SPRING SHANK CLAMP WLDMNT T-BOLT 1-8 X 17 SPRING WASHER 3 1/2OD 1ID HHCS 7/8-9X3 1/2 GR5 HHCS 3/4-10X3 3/4 GR5 NUT HEX 1-8 PLT NUT HEX 7/8-9 PLT NUT HEX FLANGE LOCK 3/4-10 PLT WASHER LOCK SPRING 3/4 PLT WASHER LOCK SPRING 7/8 PLT PIN ROLL 3/8 X 1 3/4 LG PLT PIN 1 X 8.6 HRD PLT U-BOLT 3/4-10 X 4 1/32 X 7 1/2 SPRING COMP 3.38OD.625W 12LG APPLICATOR SHANK BUSHING CYL 1 1/4 X 1 X 1 RH SIDE MNT SPRNG SHNK WLDMNT LH SIDE MNT SPRING WLDMNT SHANK OFFSET RGT MNT WLDMNT SHANK OFFSET LEFT MNT WLDMNT Shown Shown 03/11/ P

56 Table of Contents Spring Shank Mounting Part Number Index P /11/19

57 Table of Contents Part Number Index Shanks & Coulters Spring Shank Mounting Ref. Part No. Part Description Comments Revision dwg C L C C C C H S C C C C C C R R C R C C H H C C C H H H Image No. U-BOLT 3/4-10 X 4 1/32 X 7 1/2 NPA SPRING RESET MNT NUT HEX FLANGE LOCK 3/4-10 PLT U-BOLT 5/8-11 X 6 1/32 X 5 3/4 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT FRAME EXTENSION CLOSING WHEEL ARM ASSY HHCS 1/2-13X2 1/4 GR8 HHCS 1/2-13X2 1/4 GR5 WASHER FLAT 1/2 HARD ASTMF436 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT HOSE CLAMP NO ID SS EPDM SPRAY HOSE 3/8 ID EVA TUBING 3/4 ID CLAMP WRM DRV #12 SS( ) HOSE 1/2 ID X 1/8 WL CLEAR PVC FERT KNIFE DUAL OUTLET 1/8-1/4 WINGED FERTILIZER KNIFE SHANK SETBACK MOUNT SHORT FRAME EXTENSION U-BOLT 3/4-10 X 6 1/32 X 5 5/8 NUT HEX 3/4-10 PLT WASHER LOCK SPRING 3/4 PLT FRAME SETBACK WELDMENT SPRING SHANK FRAME EXT WLDMNT COULTER MOUNT Refer to Spring Shank for breakdown. 03/11/ P

58 Table of Contents Part Number Index Terra Tine Assembly LH & RH (Liquid Fertilizer Only) P /11/19

59 Table of Contents Part Number Index Shanks & Coulters Terra Tine Assembly LH & RH (Liquid Fertilizer Only) Ref. Part No. Part Description Comments Revision dwg S C C D C C D C C H C C C C C C H H D D C D D H H D C S S S C C C K K S S H Image No. SIDE MOUNT COULTER ASSY NUT HEX 5/8-11 PLT WASHER LOCK SPRING 5/8 PLT COULTER CLAMP 6H X 4W U-BOLT 5/8-11 X 6 1/32 X 5 3/4 1 1/2 X 22 OFFSET SHANK SHANK 1 1/2D X 22 FERT COULT PIN SPIROL 3/8X2 1/2 PLAIN SET SCREW SQ HD 3/4-10 X 1 1/4 NP TERRA TINE MOUNT RHSNB 1/2-13X1 1/2 GR5 NUT HEX FLANGE 1/2-13 GR G PLT SNAP RING 3/4 EXTERNAL HEAVY WASHER 1 1/4 X 3/4 X 18 GA PLT RHSNB 3/8-16X1 GR5 PARALLEL ARM PIVOT BUSHING PIVOT MOUNT WELDMENT LH PIVOT MOUNT WELDMENT RH TERRA-TINE SPRING ADJUSTER Shown, LH TERRA-TINE SPRING ADJUSTER RH NUT HEX FLANGE 3/8-16 PLT SPRING TERRA-TINE LEFT ASSY SPRING TERRA-TINE RIGHT ASSY ARM SHAFT WELDMENT LH ARM SHAFT WELDMENT RH DD BRG FLANGE DUST COVER HHCS 1/4-20X5/8 GR5 FRONT FLANGE BRG ASSEMBLY TERRA-TINE WHL SUB-ASSY 15 LH TERRA-TINE WHL SUB-ASSY 15 RH NUT HEX FLANGE 1/4-20 PLT WASHER 1 1/4 X 3/4 X 18 GA PLT HHCS 3/4-10X1 1/2 GR5 TERRA-TINE WHEEL 15 LH TERRA-TINE WHEEL 15 RH PIVOT ASSEMBLY LH PIVOT ASSEMBLY RH COULTER MOUNT Includes items 2, 3, 5, 31 Shown, LH RH Shown, LH RH Shown, LH RH LH Shown LH Shown, Includes items RH, Includes items LH Shown, Includes items RH, Includes items /11/ P

60 Coulter Assembly Table of Contents Part Number Index P /11/19

61 Table of Contents Part Number Index Shanks & Coulters Coulter Assembly Ref. Part No. Part Description Comments Revision dwg S C C D C C D C C C C D D D C C C C C C C D D C C C H H C C C H H C C D V C C D S C C C C C C C C C H Image No. SIDE MOUNT COULTER ASSY NUT HEX 5/8-11 PLT WASHER LOCK SPRING 5/8 PLT COULTER CLAMP 6H X 4W U-BOLT 5/8-11 X 6 1/32 X 5 3/4 1 1/2 X 22 OFFSET SHANK SHANK 1 1/2D X 22 FERT COULT PIN SPIROL 3/8X2 1/2 PLAIN SCREW SET 5/8-11X1 1/2 GR8 CUP NUT HEX JAM 5/8-11 PLT NUT HEX 1/2-13 PLT COULTER STOP 20 DEGREE PVT CLTR CASTING MOUNT RH PVT CLTR CASTING MOUNT LH GREASE ZERK STRAIGHT 1/4-28 WASHER MACH 1 1/4X3/4X14GA SNAP RING 3/4 EXTERNAL HEAVY WASHER MACH 1 7/8X1 1/4X 14GA SNAP RING EXT 1 1/4 HEAVY COULTER SPRING GUIDE TUBE EYE BOLT 3/4-10X14 3/4 LG SP SPRING 2.25 O.D. X.5 COIL COULTER SPRING WASHER NUT HEX JAM 3/4-10 PLT BUSHING 1.50ODX1.25IDX2.94 BUSHING 1X3/4X1 1/8 FLG HD VAN I 20" SWING ARM WLMT 20" CLTR SWING ARM LH CP PUSH LOCK 3/8 X 1/4 NPT HHCS 1/2-13X1 3/4 GR5 WASHER FLAT 1/2 USS HARD PLT VANTAGE I 20" FERTILIZER ARM VANTAGE I 20" LH FERT. ARM BRG CUP LM GREASE ZERK STRAIGHT 1/4-28 RPBY V COULTER HUB & CUP ASSY OIL SEAL DOUBLE LIP BRG CONE 1.25ID LM HUB GREASE CAP COULTER HUB PACKAGE RHSNB 1/2-13X1 1/4 GR5 WASHER SPINDLE - 7/8 NUT HEX SLOTTED 7/8-14 PLT PIN COTTER 3/16 X 1 3/4 PLT NUT HEX FLANGE 1/2-13 GR G PLT COULTER BLADE 20 FLUTED 5/8 WAVY-20" TURBO BLADE WASHER LOCK SPRING 1/2 PLT NOZZLE SOLIDSTRM H1/4U-SS0040 COULTER MOUNT Includes items 2, 3, 5 & 48 Shown Shown Shown Includes items Includes items /11/ P

Parts Manual. Nutri-Pro 30' & 40' Nutri-Pro. Copyright 2017 Printed 08/28/ P

Parts Manual. Nutri-Pro 30' & 40' Nutri-Pro. Copyright 2017 Printed 08/28/ P Table of Contents Part Number Index Parts Manual Nutri-Pro Nutri-Pro 30' & 40' Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow