Parts Manual FH6424HD, FH6630HD, FH6636HD, FH6642HD FH6845HD, FH6848HD & FH6851HD Series Harrow. Copyright 2016 Printed 04/03/ P

Transcription

1 Table of Contents Part Number Index Parts Manual 6000 Series Harrow FH6424HD, FH6630HD, FH6636HD, FH6642HD FH6845HD, FH6848HD & FH6851HD Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! Cover illustration may show optional equipment not supplied with standard unit. Copyright 2016 Printed 04/03/ P

2 Table of Contents Table of Contents Part Number Index Section 1: Introduction...4 Using This Manual...4 Manual Replacement Information...4 Manual Revisions...4 Touch-up Paint...4 Hardware Legend...5 Replacement Hardware...5 Serial Numbers...5 Part Number Service Coding...5 Frame...6 Hitch to Tongue (S/N GP-C1064B+)...6 Hitch to Tongue (S/N GP-C1063B-)...8 Tongue to Center Frame...10 FH 6800 Series Fold Stops...12 Wing Mounting Series Wing Support Series Wing Support Series Wing Support...20 Wing Adjustment (S/N GP-C1504B+)...22 Lights (S/N GP-C1504B+)...24 Lights (S/N GP-C1093B - C1503B)...26 Lights (S/N GP-C1092B-)...28 Transport...30 Transport Wheel & Hub...30 Wing Wheel & Hub...32 Harrow Drags...34 Drag Mounting /2 ft Drag Assembly ( K) ft Drag Assembly ( K) /2 ft Drag Assembly ( K)...40 Drag Extention ( K)...42 Hydraulics Series Implement Hydraulics (S/N GP-C1504B+) Series Implement Hydraulics (S/N GP-C1289B - GP-C1503B) Series Implement Hydraulics (S/N C1289B+)...48 Implement Hydraulics (S/N GP-C1288B-)...50 Hydraulic Cylinder ( C 3X16X25 ROD)...52 Hydraulic Cylinder ( C 3.5X16X25 ROD)...54 Hydraulic Cylinder ( C 4X16X75 ROD)...56 Hydraulic Cylinder ( C 2X14X125 ROD)...58 Hydraulic Cylinder ( C 5X14X125 ROD)...60 Hydraulic Cylinder ( C 3X14X25 ROD)...62 Decals...64 Decal Placement...64 Part Number Index...66 Copyright 2016 All rights reserved Printed 04/03/18 Great Plains Manufacturing, Inc. provides this publication as is without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. Great Plains Manufacturing, Incorporated Trademarks The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains All other brands and product names are trademarks or registered trademarks of their respective holders. Printed in the United States of America P /03/18

3 Table of Contents Part Number Index Alphabetized Table of Contents Selected Models 4 4 1/2 ft Drag Assembly ( K) Series Wing Support Series Implement Hydraulics (S/N GP-C1289B - GP-C1503B) Series Implement Hydraulics (S/N GP-C1504B+) ft Drag Assembly ( K) Series Wing Support /2 ft Drag Assembly ( K) Series Implement Hydraulics (S/N C1289B+) Series Wing Support...20 D Decal Placement...64 Drag Extention ( K)...42 Drag Mounting...34 F FH 6800 Series Fold Stops...12 H Hitch to Tongue (S/N GP-C1063B-)...8 Hitch to Tongue (S/N GP-C1064B+)...6 Hydraulic Cylinder ( C 3X16X25 ROD)...52 Hydraulic Cylinder ( C 3.5X16X25 ROD)...54 Hydraulic Cylinder ( C 4X16X75 ROD)...56 Hydraulic Cylinder ( C 2X14X125 ROD)...58 Hydraulic Cylinder ( C 5X14X125 ROD)...60 Hydraulic Cylinder ( C 3X14X25 ROD)...62 I Implement Hydraulics (S/N GP-C1288B-)...50 L Lights (S/N GP-C1092B-)...28 Lights (S/N GP-C1093B - C1503B)...26 Lights (S/N GP-C1504B+)...24 T Tongue to Center Frame...10 Transport Wheel & Hub...30 W Wing Adjustment (S/N GP-C1504B+)...22 Wing Mounting...14 Wing Wheel & Hub /03/ P

4 Table of Contents P Part Number Index -4-04/03/18

5 Table of Contents Part Number Index 04/03/ P

6 Table of Contents Hitch to Tongue (S/N GP-C1064B+) Part Number Index (Applies to 400 Series Harrows, 600 Series Harrows, 800 Series Harrows only) P /03/18

7 Table of Contents Part Number Index Frame Hitch to Tongue (S/N GP-C1064B+) (Applies to 400 Series Harrows, 600 Series Harrows, 800 Series Harrows only) Ref. Part No. Part Description Comments Revision dwg C C PPI-302V PPI-205H PPI-203VR C V D C C C C C C C C C C C C C C D C C C C C C C C Image No. SIDEWIND JACK 5000 LB HITCH BASE - CAT IV TOP PLATE - CAT 3 CUSHION V-BLOCK HHCS 3/4-10X3 GR5 HITCH TONGUE CAT III ASSEMBLY SAFETY CHAIN SUPPORT HHCS 1-8X9 GR8 SPTHD WASHER LOCK SPRING 1 PLT NUT HEX 1-8 PLT HITCH CLEVIS SAFETY CHAIN LB HHCS 7/8-9X3 GR5 WASHER FLAT 7/8 SAE PLT WASHER FLAT 7/8 USS PLT WASHER LOCK SPRING 7/8 PLT NUT HEX 7/8-9 PLT SPRING HOSE LOOP HEAVY HHCS 1/2-13X1 GR5 WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1/2 USS PLT HYD HOSE CLAMP BRACKET RHSNB 5/16-18X1 1/4 GR5 WASHER LOCK SPRING 5/16 PLT WASHER FLAT 1 SAE MANUAL PAK 1" W/ GASKET SCREW PAN HD 1/4-20 X 3/4 MINI END WHEEL PRESS WHEEL WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT Includes items 3-6 only DO NOT USE if tractor has a hammer-strap. Will not work with cat V. Replaced with C Rev. 2 Rev. 1 04/03/ P

8 Table of Contents Hitch to Tongue (S/N GP-C1063B-) Part Number Index (Applies to 400 Series Harrows, 600 Series Harrows, 800 Series Harrows only) P /03/18

9 Table of Contents Part Number Index Frame Hitch to Tongue (S/N GP-C1063B-) (Applies to 400 Series Harrows, 600 Series Harrows, 800 Series Harrows only) Ref. Part No. Part Description Comments Revision dwg C C C D C D C C D C C C C C C C C C C PPI-302V PPI-205H PPI-203VR C V C C Image No. SPRING HOSE LOOP HEAVY HHCS 1/2-13X1 1/2 GR5 WASHER FLAT 1/2 USS PLT SAFETY CHAIN SUPPORT RHSNB 5/16-18X1 1/4 GR5 HYD HOSE CLAMP BRACKET SIDEWIND JACK 5000 LB HHCS 1 1/4-7X4 GR5 SAFETY CHAIN WASHER SAFETY CHAIN LB WASHER LOCK SPRING 1 PLT NUT HEX 1-8 PLT HITCH BASE - CAT IV HHCS 1-8X8 GR8 PLT SPTHD WASHER LOCK 1 1/4 SPRING PLT NUT HEX 1 1/4-7 PLT HITCH CLEVIS HHCS 3/4-10X6 GR8 NUT HEX TOP LOCK 3/4-10 PLT TOP PLATE - CAT 3 CUSHION V-BLOCK HHCS 3/4-10X3 GR5 HITCH TONGUE CAT III ASSEMBLY WASHER LOCK SPRING 5/16 PLT WASHER FLAT 1 SAE Only used with item 12 Only used with item 12 Only used with item 12 Only used with item 12 Includes items only 04/03/ P

10 Table of Contents Tongue to Center Frame Part Number Index (Applies to 400 Series Harrows, 600 Series Harrows, 800 Series Harrows only) P /03/18

11 Table of Contents Part Number Index Frame Tongue to Center Frame (Applies to 400 Series Harrows, 600 Series Harrows, 800 Series Harrows only) Ref. Part No. Part Description Comments Revision dwg H H H H H D C C C D D D C C C C C C C C C C C C C H C C C D D C C C C C Image No. FH6400 HD CENTER FRAME FH6600 HD CENTER FRAME FH6800 HD CENTER FRAME HD CENTER WING 4 SECT HD CENTER WING 6 & 8 SECT PIN 1 1/2 X 10 USEABLE HHCS 1/2-13X2 GR5 NUT LOCK 1/2-13 PLT HHCS 1 1/4-7X2 GR5 1" SHIM FH FOLD STOP SHIM 1/4" SHIM 1/8" HHCS 1/2-13X2 1/2 GR5 WASHER LOCK SPRING 1/2 PLT CYL 3X16X5 ROD (TIE ROD) CYL 3.5X16X5 ROD (TIE ROD) CYL 4X16X75 ROD (TIE ROD) PIN CLEVIS 1 X 3 1/8 USABLE WASHER MACH 5X00X.075 PIN COTTER 3/16 X 2 DECAL SLOW MOVING-GALV. BACKED SCREW PAN HD 1/4-20 X 3/4 WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT GREASE ZERK 1/4-28 THD FORMING LIGHT BRACKET HHCS 1/2-13X3 1/2 GR5 NUT HEX 1/2-13 PLT BUSHING CYL 1 1/4 X 1 X 1 SHIM 1/16 VALVE BRACKET U-BOLT 1/2-13 X 4 1/32 X 5 1/4 SEQUENCING VALVE, FLEX HARROW HHCS 5/16-18X4 GR5 WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT Used with 400 Series only (S/N Rev. 1 C1174B+) Used with 600 & 800 Series only (S/N Rev. 1 C1174B+) Rev. A Used with 800 Series only Used with 800 Series only Used with 800 Series only Used with 400 Series only Used with 600 Series only Used with 800 Series only S/N C1289B+ S/N C1289B+ S/N C1289B+ 04/03/ P

12 Table of Contents FH 6800 Series Fold Stops Part Number Index (Applies to 800 Series Harrows only) P /03/18

13 Table of Contents Part Number Index Frame FH 6800 Series Fold Stops (Applies to 800 Series Harrows only) Ref. Part No. Part Description Comments Revision dwg H H C C D C C D D C C C D D D Image No. FH6800 FOLD STOP RH FH6800 FOLD STOP LH U-BOLT 5/8-11 X 4 1/32 X 5 NUT HEX 5/8-11 PLT 1" SHIM FH FOLD STOP HHCS 1/2-13X2 1/2 GR5 HHCS 1/2-13X1 1/2 GR5 1/4" SHIMS FH FOLD STOP 1/8" SHIMS FH FOLD STOP NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT WASHER LOCK SPRING 5/8 PLT SHIM 1/4" SHIM 1/8" SHIM 1/16" 04/03/ P

14 Wing Mounting Table of Contents Part Number Index (Applies to 400 Series Harrows, 600 Series Harrows, 800 Series Harrows only) P /03/18

15 Wing Mounting Table of Contents Part Number Index Frame (Applies to 400 Series Harrows, 600 Series Harrows, 800 Series Harrows only) Ref. Part No. Part Description Comments Revision dwg H H H H H H H H H H H H H H H C C C C C C C C C D D C C C Image No. 24 FT WING RH 30 FT WING RH 36 FT WING RH 42 FT WING RH 45 FT WING RH 48 FT WING RH 51 FT WING RH 24 FT WING LH 30 FT WING LH 36 FT WING LH 42 FT WING LH 45 FT WING LH 48 FT WING LH 51 FT WING LH PIN WING HINGE 1 1/2 X 20 3/4 HHCS 1/2-13X2 GR5 NUT LOCK 1/2-13 PLT CYL 2X14X125 ROD (TIE ROD) CYL 5X14X125 ROD (TIE ROD) CYL 3X14X25 ROD (TIE ROD) PIN CLEVIS 1 X 3 1/8 USABLE PIN 1 X 4 1/2 USEABLE WASHER MACH 5X00X.075 PIN COTTER 3/16 X 2 LONG DRAG ARM SHORT DRAG ARM HHCS 9/16-12X3 1/2 GR5 ZNYCR NUT HEX TOP LOCK 9/16-12 ZNYCR GREASE ZERK 1/4-28 THD FORMING (S/N C1174B+) (S/N C1174B+) (S/N C1174B+) (S/N C1174B+) (S/N C1174B+) (S/N C1174B+) (S/N C1174B+) (S/N C1174B+) (S/N C1174B+) (S/N C1174B+) (S/N C1174B+) (S/N C1174B+) (S/N C1174B+) (S/N C1174B+) Used with 400 Series only Used with 600 Series only Used with 800 Series only Rev. 1 Rev. 1 Rev. 1 Rev. 1 Rev. 1 Rev. 1 Rev. 1 Rev. 1 Rev. 1 Rev. 1 Rev. 1 Rev. 1 Rev. 1 Rev. 1 04/03/ P

16 Table of Contents 400 Series Wing Support Part Number Index (Applies to 400 Series Harrows only) P /03/18

17 Table of Contents Part Number Index Frame 400 Series Wing Support (Applies to 400 Series Harrows only) Ref. Part No. Part Description Comments Revision dwg H H C C C C Image No. WING SUPPORT 6400 WING TIE DOWN 4 SECT HHCS 5/8-11X2 GR5 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT CAP VINYL 1ID X 4L (S/N C1289B+) Rev. 2 Replaced by H (S/N C1288B-) Rev. 1 04/03/ P

18 Table of Contents 600 Series Wing Support Part Number Index (Applies to 600 Series Harrows only) P /03/18

19 Table of Contents Part Number Index Frame 600 Series Wing Support (Applies to 600 Series Harrows only) Ref. Part No. Part Description Comments Revision dwg H C C C C C C C H C C C D C C C C Image No. WING SUPPORT 6 SECT HHCS 5/8-11X2 GR5 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT 1/2" WIRE ROPE 15' 2" PIN CLEVIS 1 X 3 1/4 USEABLE WASHER MACH 5X00X.075 PIN COTTER 3/16 X 2 FH6600 CABLE LIFT ARM HHCS 1/2-13X3 1/2 GR5 NUT LOCK 1/2-13 PLT SPRING EXT 985X13.75X.207 CHAIN 5/16 HIGH TEST 17 LINKS 5/16 x 1 1/4 UTILITY CLEVIS HHCS 3/8-16X2 1/2 GR5 NUT LOCK 3/8-16 PLT CAP VINYL 1ID X 4L 04/03/ P

20 Table of Contents 800 Series Wing Support Part Number Index (Applies to 800 Series Harrows only) P /03/18

21 Table of Contents Part Number Index Frame 800 Series Wing Support (Applies to 800 Series Harrows only) Ref. Part No. Part Description Comments Revision dwg H C C C C C C C H C C C D C C C C Image No. WING SUPPORT 8 SECT HHCS 5/8-11X2 GR5 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT 1/2" WIRE ROPE 17' 10" PIN CLEVIS 1 X 3 1/4 USEABLE WASHER MACH 5X00X.075 PIN COTTER 3/16 X 2 FH6800 CABLE LIFT ARM HHCS 1/2-13X3 1/2 GR5 NUT LOCK 1/2-13 PLT SPRING EXT 985X13.75X.207 CHAIN 5/16 HIGH TEST 17 LINKS 5/16 x 1 1/4 UTILITY CLEVIS HHCS 3/8-16X2 1/2 GR5 NUT LOCK 3/8-16 PLT CAP VINYL 1ID X 4L 04/03/ P

22 Table of Contents Wing Adjustment (S/N GP-C1504B+) Part Number Index (Applies to 600 Series Harrows, 800 Series Harrows only) P /03/18

23 Table of Contents Part Number Index Frame Wing Adjustment (S/N GP-C1504B+) (Applies to 600 Series Harrows, 800 Series Harrows only) Ref. Part No. Part Description Comments Revision dwg H H H H H H H H H H H H H C C C C C C Image No. 36 FT WING LH 42 FT WING LH 45 FT WING LH 48 FT WING LH 51 FT WING LH 36 FT WING RH 42 FT WING RH 45 FT WING RH 48 FT WING RH 51 FT WING RH FH6600 HD CENTER FRAME FH6800 HD CENTER FRAME CLEVIS BOLT NUT HEX JAM 1-8 PLT PIN CLVS 0X3.38 USBL WASHER MACH 5X00X.075 PIN COTTER 3/16 X 2 1/2" WIRE ROPE 15' 2" 1/2" WIRE ROPE 17' 10" 600 Series Harrows Only 800 Series Harrows Only 04/03/ P

24 Table of Contents Lights (S/N GP-C1504B+) Part Number Index (Applies to 400 Series Harrows, 600 Series Harrows, 800 Series Harrows only) P /03/18

25 Table of Contents Part Number Index Frame Lights (S/N GP-C1504B+) (Applies to 400 Series Harrows, 600 Series Harrows, 800 Series Harrows only) Ref. Part No. Part Description Comments Revision dwg C C C C C C C Image No. LIGHT HARNESS, 30' LEAD - LED LIGHT HARNSS ENHANCE MAODULE LED LIGHT HRNSS, 12' WISHBONE LED LIGHT, RED LAMP - LED LIGHT, AMBER LAMP LED HHCS 1/4-20X1 1/4 GR5 NUT-LOCK 1/4-20PLT 04/03/ P

26 Table of Contents Lights (S/N GP-C1093B - C1503B) Part Number Index (Applies to 400 Series Harrows, 600 Series Harrows, 800 Series Harrows only) P /03/18

27 Table of Contents Part Number Index Frame Lights (S/N GP-C1093B - C1503B) (Applies to 400 Series Harrows, 600 Series Harrows, 800 Series Harrows only) Ref. Part No. Part Description Comments Revision dwg C C C C C C C C Image No. LIGHT HARNESS, 30' LEAD LIGHT HARNESS, ENHANCE MODULE LIGHT HARNESS, WISHBONE LIGHT HARNESS, RED LAMP LIGHT HARNESS, AMBER LAMP SAFETY LIGHT KIT HHCS 1/4-20X1 GR5 NUT-LOCK 1/4-20 PLT Includes Items 1 thru 5 04/03/ P

28 Table of Contents Lights (S/N GP-C1092B-) Part Number Index (Applies to 400 Series Harrows, 600 Series Harrows, 800 Series Harrows only) P /03/18

29 Table of Contents Part Number Index Frame Lights (S/N GP-C1092B-) (Applies to 400 Series Harrows, 600 Series Harrows, 800 Series Harrows only) Ref. Part No. Part Description Comments Revision dwg H H C C C C C C C C C C C C C C Image No. FH LIGHT BRACKET LH FH LIGHT BRACKET RH HHCS 9/16-12X3 1/2 GR5 ZNYCR NUT HEX TOP LOCK 9/16-12 ZNYCR DUAL AG LIGHTS LH DUAL AG LIGHTS RH HHCS 1/4-20X1 GR5 NUT LOCK 1/4-20 PLT AG LIGHT WIRING HARNESS-28' LIGHT HARNESS, 10' WISHBONE HOSE CLIP 5/8 I.D. HHCS 5/16-18X5/8 WASHER LOCK SPRING 5/16 PLT DECAL REFLECTOR AMBER 2X9 DECAL REFLECTOR RED 2X9 DECAL REFLECTOR ORANGE 2X9 Shown Shown 04/03/ P

30 Table of Contents Transport Wheel & Hub Part Number Index (Applies to 400 Series Harrows, 600 Series Harrows, 800 Series Harrows only) P /03/18

31 Table of Contents Part Number Index Transport Transport Wheel & Hub (Applies to 400 Series Harrows, 600 Series Harrows, 800 Series Harrows only) Ref. Part No. Part Description Comments Revision dwg D C C C C C C C C C C C C C C C C C C C C Image No. AXLE SPINDLE 25X13.25 Q45-8B SEAL GREASE 25X3.061X0.300 BRG CONE 78ID LM BRG CUP 3.06OD LM HUB 458 W/CUPS 8-BOLT 8" BC BRG CUP LM BRG CONE 25ID LM WASHER FLAT 3/4 HARD USS NUT HEX SLOTTED 3/4-16 GREASE CAP 448X.25X13 PIN COTTER 5/32 X 1 1/2 LONG NUT LUG 5/8-18 X 90 DEG PLT HUB STUD 5/8-18X2 1/2 GR5 HUB 8-BOLT SPNDL 25X HHCS 5/16-18X4 GR8 NUT HEX 5/16-18 PLT WHEEL 15X10 8 BOLT BUCKSKIN WHEEL 15X10 8 BOLT WHITE TIRE 15L X PLY TIRE/WHL 15LX15 12 PLY BKSN TIRE/WHL 15LX15 12 PLY WHITE Includes items 1-13 (S/N C1762B+) (S/N C1761B-) Includes items (S/N C1762B+) (S/N C1761B-) Rev. 2 Rev. 1 Rev. 2 Rev. 1 04/03/ P

32 Table of Contents Wing Wheel & Hub Part Number Index (Applies to 400 Series Harrows, 600 Series Harrows, 800 Series Harrows only) P /03/18

33 Table of Contents Part Number Index Transport Wing Wheel & Hub (Applies to 400 Series Harrows, 600 Series Harrows, 800 Series Harrows only) Ref. Part No. Part Description Comments Revision dwg D C C C C C C C C C C C C C C C C C C C C Image No. AXLE SPINDLE 2 X 12 1/2 (Q783) SEAL GREASE 875X3.000X0.313 BRG CONE 62IDX.78WD#LM BRG CUP 89ODX.58WD #LM HUB 890 W/CUPS 6-BOLT 6" BC BRG CUP LM BRG CONE 25ID LM WASHER SPINDLE - 7/8 NUT HEX SLOTTED 7/8-14 PLT GREASE CAP 448X.25X13 PIN COTTER 5/32 X 1 1/2 LONG NUT LUG 9/16-18 X 90 PLT HUB STUD 9/16-18X2 1/8 GR5 HUB 6-BOLT SPINDLE 2X15 Q890 HHCS 5/16-18X4 GR8 NUT HEX 5/16-18 PLT WHEEL 15X6 6 BOLTBUCKSKIN WHEEL 15X6 6 BOLT WHITE AC TIRE, 30 X 8.8 X 15 16PLY AC TIRE/WHL 30X8.8 6-BOLT BKSN AC TIRE/WHL 30 X BOLT Includes items 1-13 (S/N C1762B+) (S/N C1761B-) Includes items (S/N C1762B+) (S/N C1761B-) Rev. 2 Rev. 1 Rev. 2 Rev. 1 04/03/ P

34 Drag Mounting Table of Contents Part Number Index (Applies to 400 Series Harrows, 600 Series Harrows, 800 Series Harrows only) P /03/18

35 Drag Mounting Table of Contents Part Number Index Harrow Drags (Applies to 400 Series Harrows, 600 Series Harrows, 800 Series Harrows only) Ref. Part No. Part Description Comments Revision dwg D C C C C C C C D C C D C C C Image No. CHAIN 3/8 HIGH TEST 8 LINKS HHCS 9/16-12X3 1/2 GR5 ZNYCR NUT HEX TOP LOCK 9/16-12 ZNYCR HHCS 1/2-13X1 3/4 GR5 HHCS 1/2-13X2 GR5 NUT HEX JAM 1/2-13 PLT WASHER FLAT 1/2 USS PLT NUT LOCK 1/2-13 PLT CHAIN 5/16 HIGH TEST 17 LINKS HHCS 3/8-16X2 1/2 GR5 NUT LOCK 3/8-16 PLT CHAIN 5/16 HIGH TEST 8 LINKS HARROW TOOTH - 8 1/2" DIAMOND NUT HEX TOP LOCK 1/2-13 PLT HHCS 1/2-13X1 1/2 GR5 Used on 8 bar (S/N C1174B+) Used on 12 & 16 bar Rev. 1 04/03/ P

36 Table of Contents 4 1/2 ft Drag Assembly ( K) Part Number Index (Applies to 400 Series Harrows, 600 Series Harrows, 800 Series Harrows only) P /03/18

37 Table of Contents Part Number Index Harrow Drags 4 1/2 ft Drag Assembly ( K) (Applies to 400 Series Harrows, 600 Series Harrows, 800 Series Harrows only) Ref. Part No. Part Description Comments Revision dwg C D D D C C C D H C D C Image No. NUT HEX TOP LOCK 1/2-13 PLT TOOTH ANGLE PLATE ANTI TURN BLOCK U-CLEVIS PULL TAB ASSY HARROW TOOTH - 8 1/2" DIAMOND HHCS 1/2-13X4 1/2 GR5 DRAG BAR 48IN 8-HOLE BOW TIE ASSY HHCS 1/2-13X3 GR5 DRAG BAR 48IN 10-HOLE WASHER POWDER METAL CONE 1/2 (S/N C1819B+) 04/03/ P

38 Table of Contents 6 ft Drag Assembly ( K) Part Number Index (Applies to 400 Series Harrows, 600 Series Harrows, 800 Series Harrows only) P /03/18

39 Table of Contents Part Number Index Harrow Drags 6 ft Drag Assembly ( K) (Applies to 400 Series Harrows, 600 Series Harrows, 800 Series Harrows only) Ref. Part No. Part Description Comments Revision dwg C D D D C C C D H C D C Image No. NUT HEX TOP LOCK 1/2-13 PLT TOOTH ANGLE PLATE ANTI TURN BLOCK U-CLEVIS PULL TAB ASSY HARROW TOOTH - 8 1/2" DIAMOND HHCS 1/2-13X4 1/2 GR5 DRAG BAR 66IN 12-HOLE BOW TIE ASSY HHCS 1/2-13X3 GR5 DRAG BAR 66IN 10-HOLE WASHER POWDER METAL CONE 1/2 (S/N C1819B+) 04/03/ P

40 Table of Contents 7 1/2 ft Drag Assembly ( K) Part Number Index (Applies to 400 Series Harrows, 600 Series Harrows, 800 Series Harrows only) P /03/18

41 Table of Contents Part Number Index Harrow Drags 7 1/2 ft Drag Assembly ( K) (Applies to 400 Series Harrows, 600 Series Harrows, 800 Series Harrows only) Ref. Part No. Part Description Comments Revision dwg C D D D C C C D H C D C Image No. NUT HEX TOP LOCK 1/2-13 PLT ANTI TURN BLOCK TOOTH ANGLE PLATE U-CLEVIS PULL TAB ASSY HARROW TOOTH - 8 1/2" DIAMOND HHCS 1/2-13X4 1/2 GR5 DRAG BAR 84IN 12-HOLE BOW TIE ASSY HHCS 1/2-13X3 GR5 DRAG BAR 84IN 14-HOLE WASHER POWDER METAL CONE 1/2 ( S/N C1819B+) 04/03/ P

42 Table of Contents Drag Extention ( K) Part Number Index (Applies to 400 Series Harrows, 600 Series Harrows, 800 Series Harrows only) P /03/18

43 Table of Contents Part Number Index Harrow Drags Drag Extention ( K) (Applies to 400 Series Harrows, 600 Series Harrows, 800 Series Harrows only) Ref. Part No. Part Description Comments Revision dwg C C D C K NUT HEX TOP LOCK 1/2-13 PLT WASHER POWDER METAL CONE 1/2 12" EXTENSION PIPE HARROW TOOTH - 8 1/2" DIAMOND 1 1/2 FT EXTENSION ASSY (S/N C1819B+) Includes items /03/ P

44 Table of Contents Part Number Index Series Implement Hydraulics (S/N GP-C1504B+) (Applies to 400 Series Harrows, 600 Series Harrows only) P /03/18

45 Table of Contents Part Number Index Hydraulics Series Implement Hydraulics (S/N GP-C1504B+) (Applies to 400 Series Harrows, 600 Series Harrows only) Ref. Part No. Part Description Comments Revision dwg C C C C C D C C C C C C C C D C C C S C D C C Image No. CYL 3X16X5 ROD (TIE ROD) CYL 3.5X16X5 ROD (TIE ROD) CYL 2X14X125 ROD (TIE ROD) CYL 5X14X25 ROD (TIE ROD) SEQUENCING VALVE, FLEX HARROW ORIFICE PLATE.025 3/4MORB EL 3/4MJIC 3/4MORB TE 3/4MORB 3/4MJIC 3/4MJIC AD 3/4MORB 3/4MJIC TE 3/4MJIC HH3/8R /4MORB 3/4FJIC HH3/8R /4FJIC HH3/8R /4FJIC HH3/8R /4FJIC ORIFICE PLATE 3/64 3/4 HG HANDLE - GREEN EXT HG HANDLE - GREEN RET AD 3/4MORB 3/4FORB (HG) HG PAIR - GREEN MORB-FORB CP 3/4FORB MALE QD POPPET TYPE HOSE WRAP,LARGE SIZE,SHORT(8") EL 45 3/4MORB 3/4MJIC EL 3/4FJIC 3/4MJIC Refer to Hydrauic Cylinder for breakdown. Models Refer to Hydraulic Cylinder for breakdown. Models Refer to Hydraulic Cylinder for breakdown. Models Refer to Hydraulic Cylinder for breakdown. Models Includes items /03/ P

46 Table of Contents Part Number Index Series Implement Hydraulics (S/N GP-C1289B - GP-C1503B) (Applies to 400 Series Harrows, 600 Series Harrows only) P /03/18

47 Table of Contents Part Number Index Hydraulics Series Implement Hydraulics (S/N GP-C1289B - GP-C1503B) (Applies to 400 Series Harrows, 600 Series Harrows only) Ref. Part No. Part Description Comments Revision dwg C C C C C D C C C C C C C C D C C C S C D C Image No. CYL 3X16X5 ROD (TIE ROD) CYL 3.5X16X5 ROD (TIE ROD) CYL 2X14X125 ROD (TIE ROD) CYL 5X14X25 ROD (TIE ROD) SEQUENCING VALVE, FLEX HARROW ORIFICE PLATE.025 3/4MORB EL 3/4MJIC 3/4MORB TE 3/4MORB 3/4MJIC 3/4MJIC AD 3/4MORB 3/4MJIC TE 3/4MJIC HH3/8R /4MORB 3/4FJIC HH3/8R /4FJIC HH3/8R /4FJIC HH3/8R /4FJIC ORIFICE PLATE 3/64 3/4 HG HANDLE - GREEN EXT HG HANDLE - GREEN RET AD 3/4MORB 3/4FORB (HG) HG PAIR - GREEN MORB-FORB CP 3/4FORB MALE QD POPPET TYPE HOSE WRAP,LARGE SIZE,SHORT(8") EL 45 3/4MORB 3/4MJIC Refer to Hydrauic Cylinder for breakdown. Models Refer to Hydraulic Cylinder for breakdown. Models Refer to Hydraulic Cylinder for breakdown. Models Refer to Hydraulic Cylinder for breakdown. Models Includes items /03/ P

48 Table of Contents Part Number Index 800 Series Implement Hydraulics (S/N C1289B+) (Applies to 800 Series Harrows only) P /03/18

49 Table of Contents Part Number Index Hydraulics 800 Series Implement Hydraulics (S/N C1289B+) (Applies to 800 Series Harrows only) Ref. Part No. Part Description Comments Revision dwg C C C D C C C C C C C C D C C C S C D C C C Image No. CYL 4X16X75 ROD (TIE ROD) CYL 3X14X5 ROD (TIE ROD) SEQUENCING VALVE, FLEX HARROW ORIFICE PLATE.025 3/4MORB EL 3/4MJIC 3/4MORB TE 3/4MORB 3/4MJIC 3/4MJIC AD 3/4MORB 3/4MJIC TE 3/4MJIC HH3/8R /4MORB 3/4FJIC HH3/8R /4FJIC HH3/8R /4FJIC HH3/8R /4FJIC ORIFICE PLATE 3/64 3/4 HG HANDLE - GREEN EXT HG HANDLE - GREEN RET AD 3/4MORB 3/4FORB (HG) HG PAIR - GREEN MORB-FORB CP 3/4FORB MALE QD POPPET TYPE HOSE WRAP,LARGE SIZE,SHORT(8") EL 45 3/4MORB 3/4MJIC EL 3/4FJIC 3/4MJIC HOSE CLIP 5/8 I.D. Refer to Hydraulic Cylinder for breakdown. Refer to Hydrauic Cylinder for breakdown. Includes items /03/ P

50 Table of Contents Part Number Index Implement Hydraulics (S/N GP-C1288B-) (Applies to 400 Series Harrows, 600 Series Harrows, 800 Series Harrows only) P /03/18

51 Table of Contents Part Number Index Hydraulics Implement Hydraulics (S/N GP-C1288B-) (Applies to 400 Series Harrows, 600 Series Harrows, 800 Series Harrows only) Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C D C C C C C C C C C C C S C D Image No. CYL 3X16X5 ROD (TIE ROD) CYL 3.5X16X5 ROD (TIE ROD) CYL 4X16X75 ROD (TIE ROD) CYL 2X14X125 ROD (TIE ROD) CYL 5X14X25 ROD (TIE ROD) CYL 3X14X5 ROD (TIE ROD) AD 3/4MORB 3/4FJIC CR 3/4MJIC TE 3/4MJIC 3/4MORB 3/4MJIC TE 3/4MORB 3/4MJIC 3/4MJIC ORIFICE PLATE 3/64 3/4 EL 3/4MJIC 3/4MORB HH3/8R /4MORB 3/4FJIC HH3/8R /4MORB 3/4FJIC HH3/8R /4MORB 3/4FJIC HH3/8R /4MORB 3/4FJIC HH3/8R /4MORB 3/4FJIC HH3/8R /4MORB 3/4FJIC HH3/8R /4FJIC HG HANDLE - GREEN EXT HG HANDLE - GREEN RET AD 3/4MORB 3/4FORB (HG) HG PAIR - GREEN MORB-FORB CP 3/4FORB MALE QD POPPET TYPE HOSE WRAP,LARGE SIZE,SHORT(8") Refer to Hydrauic Cylinder for breakdown. Models Refer to Hydraulic Cylinder for breakdown. Models Refer to Hydraulic Cylinder for breakdown. Models Refer to Hydraulic Cylinder for breakdown. Models Refer to Hydraulic Cylinder for breakdown. Models Refer to Hydrauic Cylinder for breakdown. Models Models Models Models Models Models Models Includes items /03/ P

52 Table of Contents Part Number Index Hydraulic Cylinder ( C 3X16X25 ROD) (Applies to 400 Series Harrows only) P /03/18

53 Table of Contents Part Number Index Hydraulics Hydraulic Cylinder ( C 3X16X25 ROD) (Applies to 400 Series Harrows only) Ref. Part No. Part Description Comments Revision dwg M7016-ADI 2M4422NC 3R1512 4M4108 5M4124 6R1162-ADI 7M4324 2A0024 2A C C C C C Image No. MIDWAY HARDENED CLEVIS ADI MW ROD MIDWAY HEAD MW PISTON MW TUBE 3 X 16 CYLINDER MIDWAY ADI BASE MW TIE ROD 3 X 16 CYLINDER MW WIPER U-CUP O-RING MIDWAY BACK UP MIDWAY CROWN SEAL MIDWAY MW PISTON NUT SEAL MW PISTON NUT 1-14 MW TIE ROD NUT NUT HEX 3/8-16 PLAIN HHCS 3/8-16X1 3/4 GR5 CYL SEAL KIT MW (5A4104) 3 X 7 PIN CLEVIS 1 X 3 1/8 USABLE PIN COTTER 3/16 X 2 04/03/ P

54 Table of Contents Part Number Index Hydraulic Cylinder ( C 3.5X16X25 ROD) (Applies to 600 Series Harrows only) P /03/18

55 Table of Contents Part Number Index Hydraulics Hydraulic Cylinder ( C 3.5X16X25 ROD) (Applies to 600 Series Harrows only) Ref. Part No. Part Description Comments Revision dwg M7016-ADI 2M5422NC 3R3412 4M5108 5M5124 6R3162-ADI 7M5324 2A0024 2A C C C C C Image No. MIDWAY HARDENED CLEVIS ADI MW ROD MW HEAD MW PISTON MW TUBE 3-1/2 X 16 CYLINDER MIDWAY ADI BASE MW TIE ROD MW WIPER U-CUP O-RING MIDWAY BACK UP MIDWAY CROWN SEAL MIDWAY MW PISTON NUT SEAL MW PISTON NUT 1-14 MW TIE ROD NUT NUT HEX 3/8-16 PLAIN HHCS 3/8-16X1 3/4 GR5 SEAL KIT MW (5A5102) 3.5X25R PIN CLEVIS 1 X 3 1/8 USABLE PIN COTTER 3/16 X 2 04/03/ P

56 Table of Contents Part Number Index Hydraulic Cylinder ( C 4X16X75 ROD) (Applies to 800 Series Harrows only) P /03/18

57 Table of Contents Part Number Index Hydraulics Hydraulic Cylinder ( C 4X16X75 ROD) (Applies to 800 Series Harrows only) Ref. Part No. Part Description Comments Revision dwg M7021-ADI 2M6922NC 3R5512 4M6108 5M6124 6R5162-ADI 7M6324 2A0024 2A C C C C C Image No. MW ROD CLEVIS 00PN 5-12THD MW ROD MIDWAY HEAD MW PISTON MW TUBE 4 X 16 CYLINDER MIDWAY ADI BASE MW TIE ROD 4 X 16 CYLINDER MW WIPER U-CUP O-RING MIDWAY BACK UP MIDWAY CROWN SEAL MIDWAY MW PISTON NUT SEAL MW PISTON NUT 1-14 MW TIE ROD NUT NUT HEX 3/8-16 PLAIN HHCS 3/8-16X1 3/4 GR5 SEAL KIT C MW 5A6105 PIN CLEVIS 1 X 3 1/8 USABLE PIN COTTER 3/16 X 2 04/03/ P

58 Table of Contents Part Number Index Hydraulic Cylinder ( C 2X14X125 ROD) (Applies to 400 Series Harrows only) P /03/18

59 Table of Contents Part Number Index Hydraulics Hydraulic Cylinder ( C 2X14X125 ROD) (Applies to 400 Series Harrows only) Ref. Part No. Part Description Comments Revision dwg M6006-ADI 2M2320NC 3R0124 4M2108 5M2122 6R0062-ADI 7M C C C C C C C Image No. MIDWAY HARDENED CLEVIS ADI MW ROD MIDWAY HEAD MW PISTON MW TUBE F/ 2 X 14 DA CLINDER MW BASE MW TIE ROD F/ 2 X 14 DA CYL MW WIPER U-CUP O-RING MIDWAY BACK UP MIDWAY CROWN SEAL MIDWAY MW PISTON NUT SEAL MW PISTON NUT 1-14 NUT HEX 3/8-16 PLAIN NUT HEX 3/8-16 PLAIN HHCS 3/8-16X1 3/4 GR5 SEAL KIT MW 5A2104 PIN CLEVIS 1 X 3 1/8 USABLE PIN COTTER 3/16 X 2 04/03/ P

60 Table of Contents Part Number Index Hydraulic Cylinder ( C 5X14X125 ROD) (Applies to 600 Series Harrows only) P /03/18

61 Table of Contents Part Number Index Hydraulics Hydraulic Cylinder ( C 5X14X125 ROD) (Applies to 600 Series Harrows only) Ref. Part No. Part Description Comments Revision dwg M6006-ADI 2M3320NC 3R0312 4M3108 5M3122 6R0162-ADI 7M C C C C C C C Image No. MIDWAY HARDENED CLEVIS ADI MW ROD MIDWAY HEAD MW PISTON MW TUBE F/ 2 X 14 DA CLINDER MW BASE MW TIE ROD MW WIPER U-CUP O-RING MIDWAY BACK UP MIDWAY CROWN SEAL MIDWAY MW PISTON NUT SEAL MW PISTON NUT 1-14 NUT HEX 3/8-16 PLAIN NUT HEX 3/8-16 PLAIN HHCS 3/8-16X1 3/4 GR5 SEAL KIT MW 5 CYL 3A3102 PIN CLEVIS 1 X 3 1/8 USABLE PIN COTTER 3/16 X 2 04/03/ P

62 Table of Contents Part Number Index Hydraulic Cylinder ( C 3X14X25 ROD) (Applies to 800 Series Harrows only) P /03/18

63 Table of Contents Part Number Index Hydraulics Hydraulic Cylinder ( C 3X14X25 ROD) (Applies to 800 Series Harrows only) Ref. Part No. Part Description Comments Revision dwg M7016-ADI 2M4420NC 3R1412 4M4108 5M4122 6R1162-ADI 7M4322 2A0024 2A C C C C C Image No. MIDWAY HARDENED CLEVIS ADI MW ROD MW HEAD 3X1-1/4 ROD PT.E MW PISTON MIDWAY TUBE MIDWAY ADI BASE MIDWAY TIE ROD MW WIPER U-CUP O-RING MIDWAY BACK UP MIDWAY CROWN SEAL MIDWAY MW PISTON NUT SEAL MW PISTON NUT 1-14 MW TIE ROD NUT NUT HEX 3/8-16 PLAIN HHCS 3/8-16X1 3/4 GR5 CYL SEAL KIT MW (5A4104) 3 X 7 PIN CLEVIS 1 X 3 1/8 USABLE PIN COTTER 3/16 X 2 04/03/ P

64 Decal Placement Table of Contents Part Number Index (Applies to 400 Series Harrows, 600 Series Harrows, 800 Series Harrows only) P /03/18

65 Table of Contents Part Number Index Decals Decal Placement (Applies to 400 Series Harrows, 600 Series Harrows, 800 Series Harrows only) Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C C C C C C C C C C C C C C C C Image No. DECAL - FOLDING WARNING DECAL WARNING 20 MPH TRANS SML DECAL DANGER CRUSHING HAZARD DECAL GP&LOGO HARVEST/3X20 STR DECAL LOGO&GP F/STRIPE 4 X 24 DECAL HD DECAL HD DECAL HD DECAL HD DECAL HD DECAL HD DECAL HD DECAL - TIP OVER WARNING DECAL WARNING HYD PRESS LONG DECAL CAUTION GENERAL 4X5 DECAL GP PLANTING COMPONENTS DECAL - CYL. OR FRM DAMAGE DECAL DANGER ELECTROCUTION HA DECAL REFLECTOR ORANGE 2X9 DECAL REFLECTOR RED 2X9 DECAL - WING CYLINDER DECAL - FLEX HARROW DECAL WARNING OVERHEAD WING DECAL CAUTION TIRES NOT A STEP DECAL REFLECTOR AMBER 2X9 Replaced by C Shown Rev. 2 Rev. 1 04/03/ P

66 Table of Contents Part Number Index Part Number Index The Part Number Index is a numeric index of all part numbers included in this manual. The index shows what page(s) the part is used on. Part Number Page Part Number Page Part Number Page Part Number Page D...9 1M6006-ADI...59, 61 1M7016-ADI...53, 55, 63 1M7021-ADI A , 63 2A A A , 55, 57, 63 2M2320NC M3320NC M4420NC M4422NC M5422NC M6922NC R R R R R R M M M , 63 4M M D...7, S...45, 47, 49, D D...7, D...45, 47, H H...11, H...11, H H H H H H H H H H H...15, H...15, H...15, H...15, H...15, H...15, H...15, H...15, H...15, H...15, H...37, 39, K H H D D D H H D...37, 39, D...37, 39, D...37, 39, D D D D D D D...19, 21, H D D D D...11, D...11, D...45, 47, 49, H H H H D...11, D D D D...11, D D...45, 47, 49, V...7, 9 5M M M M M M R0062-ADI R0162-ADI R1162-ADI...53, 63 6R3162-ADI R5162-ADI M M M M M M C...29, C...11, C...7, C...27, C...7, C... 53, 55, 57, 59, 61, C...37, 39, C...11, 19, C...17, 19, C C...9, 13, C...19, 21, C...11, 15, C...11, C C C C C C C...7, C...37, 39, C C C...15, 29, C C...31, C C C C...7, C...25, 27, C...11, 31, C...19, 21, C...11, 15, 19, 21, C...11, C...13, 17, 19, C C C...7, C C C C C C...59, C C... 53, 55, 57, 59, 61, C...15, 29, C...35, 37, 39, 41, C C...7, C C...7, 9, 11, C...7, 11, C...7, 9, C...13, 17, 19, C C...7, C...7, C C C C C...37, 39, 41, C...11, 15, 19, 21, C... 11, 15, 19, 21, 23, 53, 55, 57, 59, 61, C...31, C...19, 21, C C... 11, 15, 53, 55, 57, 59, 61, C C C...7, C...19, C...53, C C C C...11, 45, 47, C...11, 45, 47, C...11, 49, C...15, 45, 47, C...15, 45, 47, C...15, 49, C C...11, 45, 47, C...45, 47, 49, C...45, 47, 49, C...45, 47, C C...45, 47, C C...45, C C...45, 47, 49, C...45, 47, C...45, 47, C...45, 47, C...45, 47, 49, C...45, 47, 49, C...45, 47, 49, C...45, 47, 49, C C C C C C C C C C C C C C C C C C C...17, 19, C C C C...31, C...31, C C C C C C C C C C C C C C C C C...29, C...29, C...29, C...45, 47, C C C C C...49, C C C C C C C C C C C C C C C...19, P /03/18

67 Table of Contents Part Number Index Part Number Index (continued) Part Number Page C...7, C...7, C C C C C...31, C...7, C C C C C C C...7, C...21, C...19, C...37, 39, C...35, 37, 39, 41, 43 dwg dwg dwg , 55, 57, 59, 61, 63 dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg PPI-203VR...7, 9 PPI-205H...7, 9 PPI-302V...7, 9 04/03/ P

68 Great Plains Mfg., Inc E. North Street Salina, Kansas USA