Parts Manual. Air Drill Implement 3N-4010HDA. Copyright 2018 Printed 09/13/ P

Transcription

1 Table of Contents Part Number Index Parts Manual 3N-4010HDA Air Drill Implement Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! Cover illustration may show optional equipment not supplied with standard unit. Copyright 2018 Printed 09/13/ P

2 Table of Contents Table of Contents Part Number Index Section 1: Introduction...4 Using This Manual...4 Manual Replacement Information...4 Manual Revisions...4 Touch-up Paint...4 Hardware Legend...5 Replacement Hardware...5 Serial Numbers...5 Part Number Service Coding...5 Tongue and Frame...6 Hitch to Tongue...6 Tongue to Wings...8 Wing to Center Frame...10 Rear Hitch to Frame...12 Lights & Harness S/N C1003M Lights & Harness S/N C1004M Rockshaft...18 Rockshaft...18 Rockshaft to Frame...20 Rear Axle Assembly...22 Gauge Wheel...26 Gauge Wheel Striker Plate...30 Openers...32 HD10 Series Opener Arms & Mounts...32 HD10 Series Opener Body (S/N C1002M-)...34 HD10 Series Opener Body (S/N C1003M+)...36 HD10 Series Keeton Seed Firmer (Option)...38 HD10 Series Seed-Lok (Option)...40 Coulter...42 Coulter Tine (Option)...44 Grease Bank...46 Press Wheels...48 HD10 1 1/4" x 13 1/2" Double Press Wheel...48 HD10 1" x 12" Double "V" Press Wheel...50 HD10 2" x 13" Single Press Wheel...52 HD10 3" x 13" Single Press Wheel...54 HD10 3" x 14" Single Press Wheel...56 Hydraulics...58 Lift and Fold Hydraulics...58 Lock Cylinder Hydraulics...60 Hydraulic Cylinder ( C 5x20x2 Rod)...62 Hydraulic Cylinder ( C 5x24x2 Rod)...64 Hydraulic Cylinder ( C 4.5x16x1.5 Rod)...66 Hydraulic Cylinder ( C 4.75x16x1.5 Rod)...68 Hydraulic Cylinder ( C 5x16x1.5 Rod)...70 Hydraulic Cylinder ( C 1.5x2.5x.75 Rod)...72 Stroke Control Valve ( C)...74 Double Selector Valve( C)...76 Decals...78 Decals...78 Monitor...80 Monitor...80 Tower...82 Tower...82 Marker...84 Marker Arm...84 Marker Disk and Hub ( S)...86 LH Marker Hydraulics...88 Dual Marker Hydraulics...90 Hydraulic Cylinder ( C 3x24x1.5 Rod)...92 Sequence Valve ( C)...94 Weight Bracket (Option)...96 Part Number Index...98 Copyright 2018 All rights reserved Printed 09/13/18 Great Plains Manufacturing, Inc. provides this publication as is without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. Great Plains Manufacturing, Incorporated Trademarks The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains All other brands and product names are trademarks or registered trademarks of their respective holders. Printed in the United States of America P /13/18

3 Table of Contents Part Number Index Alphabetized Table of Contents Selected Models C Coulter...42 Coulter Tine (Option)...44 D Decals...78 Double Selector Valve( C)...76 Dual Marker Hydraulics...90 Stroke Control Valve ( C)...74 T Tongue to Wings...8 Tower...82 W Weight Bracket (Option)...96 Wing to Center Frame...10 G Gauge Wheel...26 Gauge Wheel Striker Plate...30 Grease Bank...46 H HD10 1 1/4" x 13 1/2" Double Press Wheel...48 HD10 1" x 12" Double "V" Press Wheel...50 HD10 2" x 13" Single Press Wheel...52 HD10 3" x 13" Single Press Wheel...54 HD10 3" x 14" Single Press Wheel...56 HD10 Series Keeton Seed Firmer (Option)...38 HD10 Series Opener Arms & Mounts...32 HD10 Series Opener Body (S/N C1002M-)...34 HD10 Series Opener Body (S/N C1003M+)...36 HD10 Series Seed-Lok (Option)...40 Hitch to Tongue...6 Hydraulic Cylinder ( C 1.5x2.5x.75 Rod)...72 Hydraulic Cylinder ( C 3x24x1.5 Rod)...92 Hydraulic Cylinder ( C 5x16x1.5 Rod)...70 Hydraulic Cylinder ( C 4.75x16x1.5 Rod)...68 Hydraulic Cylinder ( C 4.5x16x1.5 Rod)...66 Hydraulic Cylinder ( C 5x24x2 Rod)...64 Hydraulic Cylinder ( C 5x20x2 Rod)...62 L LH Marker Hydraulics...88 Lift and Fold Hydraulics...58 Lights & Harness S/N C1003M Lights & Harness S/N C1004M Lock Cylinder Hydraulics...60 M Marker Arm...84 Marker Disk and Hub ( S)...86 Monitor...80 R Rear Axle Assembly...22 Rear Hitch to Frame...12 Rockshaft...18 Rockshaft to Frame...20 S Sequence Valve ( C) /13/ P

4 Table of Contents P Part Number Index -4-09/13/18

5 Table of Contents Part Number Index 09/13/ P

6 Hitch to Tongue Table of Contents Part Number Index P /13/18

7 Hitch to Tongue Table of Contents Part Number Index Tongue and Frame Ref. Part No. Part Description Comments Revision dwg H H C H C C D C C H H C C H C C D C H C C H C C C C D Image No. 3S40HD TONGUE LH PULLBAR WLDMT 3S40HD TONGUE RH PULLBAR WLDMT SCREW JACK 5000# HITCH PIVOT MOUNT WLDMT HHCS 1 1/4-7X9 1/2 GR5 SPTHD NUT HEX 1 1/4-7 NYLON INSERT SAFETY CHAIN WASHER HHCS 1 1/4-7X11 GR5 SPTHD SAFETY CHAIN LB SINGLE HITCH STRAP-LARGE CLEVIS HITCH WELDMENT WASHER LOCK 1 1/4 SPRING PLT NUT HEX 1 1/4-7 PLT SINGLE HITCH STRAP-SMALL U-BOLT 5/8-11 X 6 1/32 X 7 3/4 TONGUE SPACER SKID BLOCK SLIDER BLOCK ADJUST SHIM NUT HEX FLANGE 5/8-11 PLT HOSE POST BASE, 40P PIN COTTER 3/16 X 1 WASHER FLAT 1 1/4 USS PLT SWIVEL HOSE POST HHCS 5/16-18X1 1/4 GR5 HHCS 5/16-18X2 1/4 GR5 WASHER LOCK SPRING 5/16 PLT HOSE CLIP 13/16 ID HYD HOSE CLAMP BRACKET Used with LH Pull Bar Used with RH Pull Bar 09/13/ P

8 Tongue to Wings Table of Contents Part Number Index P /13/18

9 Table of Contents Part Number Index Tongue and Frame Tongue to Wings Ref. Part No. Part Description Comments Revision dwg C C C D C C D C C C C D C Image No. HHCS 1 1/4-7X6 1/2 GR5 PLT NUT HEX 1 1/4-7 NYLON INSERT U-BOLT 5/8-11 X 6 1/32 X 7 3/4 SLIDER BLOCK ADJUST SHIM OUTSIDE TONGUE SKID BLOCK NUT HEX FLANGE 5/8-11 PLT HYD HOSE CLAMP BRACKET WASHER LOCK SPRING 5/16 PLT HHCS 5/16-18X1 1/4 GR5 HHCS 5/16-18X2 1/4 GR5 HOSE CLIP 13/16 ID 3N-40 TONGUE BLOCK SUPT BAR HHCS 5/8-11X1 3/4 GR5 Used with LH Pull Bar Used with RH Pull Bar 09/13/ P

10 Table of Contents Wing to Center Frame Part Number Index P /13/18

11 Table of Contents Part Number Index Tongue and Frame Wing to Center Frame Ref. Part No. Part Description Comments Revision dwg C C D D C C C C H C H H C D C C C H C H H C C C C C D C H C C C C D D C C D C C C C C C C C C H C C C C C H H Image No. NUT HEX SLOTTED 1 1/4-7 WASHER FLAT 1 1/4 USS PLT PIVOT PIN RETAINER WASHER 40P TOOLBAR PIVOT PIN CYL REP 5X24X2 ROD (TIE) NUT HEX 1-8 PLT WASHER LOCK SPRING 1 PLT HHCS 1-8X4 GR5 FOLD CYLINDER BASE LUG WLDMNT BUSHING SPINDLE 1 1/2X1 1/4X1 40P LH TOOLBAR WELDMENT 40P RH TOOLBAR WELDMENT BUSHING 4.0X3.5X3.0 LONG SPLIT ADAPTOR NUT 3/4-16 X 5/8-11 NUT HEX JAM 3/4-16 UNF PLT CYL 1.5X2.5X.75 ROD (TIE ROD) HHCS 5/8-11X7 1/2 GR5 LOCK ARM WELDMENT PIN COTTER 1/8 X 1 1/4 PLT 3N40 HD AIR LH WING FRAME 3N40 HD AIR RH WING FRAME WASHER FLAT 5/8 SAE PLT SPRING COMP.906OD X 9 X.105W PIN CLEVIS 5/8 X 2.77 USALBE PIN CLEVIS 1/2 X 2 1/2 PLT WASHER FLAT 1/2 SAE PLT TRANSPORT LOCK LATCH BAR PIN COTTER 5/32 X 1 PLT 40P CENTER FRAME WELDMENT PIN COTTER 5/16 X 2 1/2 HHCS 3/4-10X6 GR5 NUT LOCK 3/4-10 PLT GREASE ZERK STRAIGHT 1/4-28 SPACER WASHER FOLD CYL ADJUSTMENT SHIM PIN COTTER 1/4 X 2 1/2 PLT WASHER FLAT 1 USS PLT TOOLBAR LOCK BAR NUT HEX 3/4-10 PLT WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT U-BOLT 3/8-16X 6.13 X 6.25 RND HHCS 1 1/4-7X4 1/2 GR5 NUT HEX 1 1/4-7 PLT GREASE ZERK 1/4-28 X 90-DEG NUT HEX JAM 3/4-10 PLT SPRING LEVER TOOLB LOCK ARM WELDM MIDWAY ROD CLEVIS 3/4-16 UNF NUT LOCK 3/8-16 PLT WASHER FLAT 3/4 USS PLT HHCS 3/8-16X2 1/4 GR5 PIN CLEVIS 5/8 X 2 1/2 PLT RPBY H CYL PIN NR 1.25X3.63USBX3.13CH 09/13/ P

12 Table of Contents Rear Hitch to Frame Part Number Index P /13/18

13 Table of Contents Part Number Index Tongue and Frame Rear Hitch to Frame Ref. Part No. Part Description Comments Revision dwg H C C C C C C H C C C Image No. 3N-40 PULL HITCH WELDMENT HHCS 3/4-10X2 1/4 GR5 U-BOLT 3/ /32 X 7 3/4 NUT HEX 3/4-10 PLT WASHER FLAT 3/4 USS PLT WASHER LOCK SPRING 3/4 PLT PINTLE HOOK 20 TON HEAVY DUTY IMPLEMENT HOSE CONNECTION WELD HHCS 1/2-13X1 1/4 GR5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT 09/13/ P

14 Table of Contents Lights & Harness S/N C1003M- Part Number Index P /13/18

15 Table of Contents Part Number Index Tongue and Frame Lights & Harness S/N C1003M- Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C D C C D D C D C C C C C C Image No. LIGHT HARNESS, 35' LEAD AG LIGHT HARNESS, EXT-15' AG LIGHT HARNESS, Y-CONN LIGHT HARNESS, 10' WISHBONE DUAL AG LIGHTS RH DUAL AG LIGHTS LH SCR HEX SELF TAP 1/4-20X1TYPEF MANUAL PAK 1'" W/ GASKET CABLE TIE.19X D 50LB 3N40 LIGHT MOUNT BRACKET HHCS 1/2-13X1 1/2 GR5 NUT HEX 1/2-13 PLT SPRING AND WHEEL WRENCH MANUAL PAK MOUNT HHCS 1/4-20X1 GR5 WRENCH HOLDER STRAP NUT HEX 3/8-16 PLT WASHER LOCK SPRING 3/8 PLT WASHER FLAT 3/8 SAE PLT PIN HAIR COTTER.148 WIRE U-BOLT 3/8-16 X 2 1/32 X 3 WASHER LOCK SPRING 1/2 PLT 09/13/ P

16 Table of Contents Lights & Harness S/N C1004M+ Part Number Index P /13/18

17 Table of Contents Part Number Index Tongue and Frame Lights & Harness S/N C1004M+ Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C C C C D C C C C C C C C C C H C C D C C C D C C D C C C C C C Image No. LIGHT HARNESS 3N4010HDA ADC2350 INTELLIAG 3N40 IMP KIT WISHBONE WIRING HRNSS-SHRT LED ADHESIVE BACK CORD CLIP LIGHT HRNSS ENHANCE MODULE LED WASHER FLAT 1/4 USS PLT WASHER LOCK SPRING 1/4 PLT HHCS 1/4-20X1 1/4 GR5 LIGHT, AMBER LAMP LED HHCS 1/2-20X1 GR5 DECAL REFLECTOR RED 2X9 DECAL REFLECTOR DAYTIME 2X9 SCREW HEX SELF TAP 1/4-20X3/4 3N40 LIGHT MOUNT BRACKET WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT NUT HEX NYLOCK 1/4-20 LIGHT, RED LAMP - LED U-BOLT 1/4-20 X 2 9/32 X 3 GR2 U-BOLT 3/8-16 X 2 1/32 X 3 WASHER LOCK SPRING 3/8 PLT HHCS 1/4-20X1 GR5 NUT HEX 3/8-16 PLT PIN HAIR COTTER.148 WIRE WRENCH HOLDER WASHER FLAT 3/8 SAE PLT CABLE TIE.19X D 50LB SPRING AND WHEEL WRENCH MINI END WHEEL PRESS WHEEL MANUAL PAK 1" W/ GASKET NUT HEX LOCK 1/4-20 FLG MANUAL PAK MOUNT U-BOLT 3/8-16 X 4 1/32 X 3 3/4 NUT LOCK 3/8-16 NYLON INSERT SMV BRKT HHCS 5/16-18X3/4 GR5 DECAL SLOW MOVING-GALV. BACKED SCREW RD HD 1/4-20 X 5/8 NUT HEX 1/4-20 PLT WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT 09/13/ P

18 Rockshaft Table of Contents Part Number Index P /13/18

19 Rockshaft Table of Contents Part Number Index Rockshaft Ref. Part No. Part Description Comments Revision dwg26268 Image No H 3N40 HD AIR ROCKSHAFT WELDMENT H CYLINDER LOCK CHANNEL 1 1/2X C 3N40 HD SPINDLE 10 BOLT 12000# C HUB STUD 3/4-16X2 9/16 GR5 GKN-L HUB 10-BOLT MACHINED CASTING GKN-P HUB CAP GKN ARMSTRONG C NUT HEX FLANGE 3/4-16 PLT K TIRE/WHL NHS 10 BOLT C HHCS 5/16-18X3/4 GR C HHCS 1-8X5 1/2 GR C NUT HEX SIDE LOCK 1-8 PLT C HUB ASSY 10 BOLT 12000# C BRG CONE 2.50ID # C BRG CONE 1.75IDX1.15WD # C PIN 3/8 X 3 USABLE LW/PIN C TIRE NHS 16 PLY C WHEEL 22.5X13 10 BOLT 0 OFFSET C VALVE STEM METAL TR-575 TUBLES C BRG CUP 4.43ODX.93WD # C BRG CUP 4.25ODX.87WD #453A GKN-P SPINDLE WASHER GKN ARMSTRONG C NUT HEX SLOTTED 1 1/4-12 PLAIN C PIN COTTER 7/32 X 2 GKN-P GREASE SEAL GKN ARMSTRONG C GREASE ZERK STRAIGHT 1/ K 3N40HD 10 BOLT HUB AND SPINDLE GKN-P RUBBER GASKET GKN ARMSTRONG Formerly C 09/13/ P

20 Table of Contents Rockshaft to Frame Part Number Index P /13/18

21 Table of Contents Part Number Index Rockshaft Rockshaft to Frame Ref. Part No. Part Description Comments Revision dwg D H D C C H C C C D H C C C C C C C C C C C C C D C C D H H C C Image No. DEPTH STOP TUBE BRACKET STROKE CONTROL PADDLE WLDMT DEPTH STOP SLIDE TUBE KNOB 1/2-13 MALE THD 2 3/8OD U-BOLT 5/8-11 X 4 1/32 X 3 3/8 DEPTH VALVE MOUNT NUT HEX 5/8-11 PLT WASHER LOCK SPRING 5/8 PLT VALVE, STROKE CTRL 35 GPM -12 DEPTH STOP CURVED LINK PLATE 40P ROCKSHAFT PIN WELDMENT PIN ROLL 3/8 X 2 PLT BUSHING 1 1/2 X 1 1/4 X 1 1/2 BUSHING SPINDLE 1 1/2X1 1/4X1 CYL REP 5X16X1.5 ROD (TIE) RHSNB 1/2-13X5 GR5 NUT HEX 5/16-18 PLT GREASE ZERK STRAIGHT 1/4-28 U-BOLT 1/2-13 X 6 1/32 X 7 1/4 NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT GREASE ZERK 1/4-28 X 90-DEG FLG TP LK 5/16-18ZNYCR HHCS 5/16-18X2 GR5 BAR FLT HR 3/16X1 3/4X4.88 WASHER LOCK SPRING 5/16 PLT HHCS 3/8-16X2 3/4 GR5 TUBE RND CREW 3/4ODX12GX3.25 CYL PIN NR 1.25X3.09X2.63 W/GR CYL PIN NR 1.25X3.72USBX3.13CH WASHER FLAT 1 USS PLT PIN COTTER 1/4 X 2 1/2 PLT 09/13/ P

22 Table of Contents Rear Axle Assembly Part Number Index P /13/18

23 Table of Contents Part Number Index Rockshaft Rear Axle Assembly Ref. Part No. Part Description Comments Revision dwg H C C D C C C H C C C H C D C D C C D C C H C C C C D C H C H K C C K D C D C D C C C C C C C D H H C C C C C D Image No. 3N40 HD AIR REAR AXLE WELDMENT HHCS 5/16-18X1 3/4 GR5 WASHER LOCK SPRING 5/16 PLT HYD HOSE CLAMP BRACKET NUT HEX 1 1/2-6 PLT WASHER LOCK 1 1/2 PLT NUT HEX JAM 1 1/2-6 PLT EYEBOLT WELDMENT BUSHING SPINDLE 1 1/2X1 1/4X1 CYL REP 4.5X16X1.5 ROD (TIE) GREASE ZERK STRAIGHT 1/4-28 CYL LOCK CHANNEL 1 1/2X17 3/4 PIN 3/8 X 3 USABLE LW/PIN 40P TOOLBAR PIVOT PIN HHCS 1-8X18 GR5 PIVOT PIN RETAINER WASHER WASHER FLAT 1 1/4 USS PLT NUT HEX SLOTTED 1 1/4-7 40P CASTER INNER PIVOT TUBE WASHER LOCK SPRING 1 PLT NUT HEX 1-8 PLT CASTER PARALLEL ARM WELDMENT BUSHING 1 7/8X1 5/8X1 1/2 SPLT WASHER FLAT 1 USS PLT HHCS 1/2-13X1 1/4 GR5 WASHER LOCK SPRING 1/2 PLT NTA CASTER RETAINER CAP STEEL BUSHING 3 1/4X3IDX3LONG CASTER SWIVEL SUPPORT WELDMENT PIVOT THRUST WASHER CASTER 3N40 HD SNGL REAR TIRE/WHL NHS 10 BOLT HHCS 1-8X5 1/2 GR5 NUT HEX LOCK 1-8 PLT 3N40HD 10 BOLT HUB AND SPINDLE 3N40 HD BLK SED CSTR VER SHAFT HHCS 3/4-10X10 GR5 CASTER SPRING PLUNGER SPRING COMP 1.88OD X.362W CASTER DETENT PIN HHCS 3/4-10X2 GR5 WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT HHCS 3/4-10X6 GR5 NUT LOCK 3/4-10 PLT PIN COTTER 5/16 X 2 1/2 HHCS 3/4-10X4 GR5 FTHD SPACER WASHER CYL PIN NR 1.25X3.09X2.63 W/GR CYL PIN NR 1.25X3.63USBX3.13CH WASHER FLAT 1 1/4 SAE PLT PIN COTTER 1/4 X 2 1/2 PLT HHCS 1/4-28X3/8 GR5 NUT HEX JAM 3/4-10 PLT HSFCHCS 1/2-13X2 GR8 PLT CASTER DETENT FRICTION PLATE Refer to "Hydraulic Cylinder ( C 4.5X16X1.5 Rod" for breakdown Refer to "Rockshaft" for breakdown Refer to "Rockshaft" for breakdown 09/13/ P

24 Table of Contents Rear Axle Assembly (continued) Part Number Index Ref Part No C D S C C C H H C C D C C C C Part Description BUSHING 4.0X3.5X3.0 LONG SPLIT BRKT LIFT SWITCH 3PYP DJ SWITCH SPDT W/WISKER & WIRE HHCS 5/16-18X3/4 GR5 WASHER FLAT 5/16 USS PLT NUT HEX 5/16-18 PLT CASTER 3N40 HD SNGL REAR RH CASTER PRESSURE PIN WELDMENT CASTER FRICTION PRESSURE DISK SCREW PAN HD 6-32 X 1/2 SS PROXIMITY SENSOR MNT BRKT CTA IND. SENSOR M18X46 WASHER FLAT #6 SAE PLT WASHER LOCK #6 SS NUT HEX 6-32 SS Comments (S/N C1003M-) (S/N C1004M+) (S/N C1004M+) (S/N C1004M+) (S/N C1004M+) (S/N C1004M+) (S/N C1004M+) Revision P /13/18

25 Table of Contents Part Number Index Rockshaft Rear Axle Assembly (continued) This Page Intentionally Left Blank 09/13/ P

26 Gauge Wheel Table of Contents Part Number Index P /13/18

27 Gauge Wheel Table of Contents Part Number Index Rockshaft Ref. Part No. Part Description Comments Revision H H D H C C H H H H D D C C D C C C C C C C C D D D C H C H C C C D D C C H H C C D D D D C C C H C C C H H C K C Image No. 40P LOCK CASTER SUPPORT WLDMT 40HD FRONT CASTER SUPPORT WLD CASTER LOCK LUG CASTER LOCK ARM EXTEND BUSHING 5X4 1/2X3 CONNEX PIVOT THRUST WASHER CASTER 3N40 HD SNGL LH FRONT CASTER 3N40 HD SNGL RH FRONT CASTER 40HD SINGLE LH FRONT CASTER 40HD SINGLE RH FRONT CASTER LOCK RAMP CASTER DETENT PIN HHCS 1-8X18 GR5 WASHER FLAT 1 SAE CASTER SPRING PLUNGER HHCS 3/4-10X4 GR5 FTHD WASHER FLAT 5/8 SAE PLT PIN CLEVIS 5/8 X 3 1/2 PIN COTTER 1/8 X 1 1/4 PLT WASHER LOCK SPRING 1 PLT NUT HEX 1-8 PLT HHCS 1/2-13X1 1/4 GR5 WASHER LOCK SPRING 1/2 PLT NTA CASTER RETAINER CAP 4 1/2 CASTER RETAINER CAP 40P CASTER INNER PIVOT TUBE BUSHING 1 7/8X1 5/8X1 1/2 SPLT CASTER PARALLEL ARM WELDMENT BUSHING SPINDLE 1 1/2X1 1/4X1 EYEBOLT WELDMENT NUT HEX JAM 1 1/2-6 PLT WASHER LOCK 1 1/2 PLT NUT HEX 1 1/2-6 PLT 40P GW SWIVEL PIN BOX HINGE PIVOT WASHER WASHER FLAT 1 1/4 USS PLT NUT HEX SLOTTED 1 1/4-7 3N40 HD CASTER SWIVEL MOUNT RH 3N40 HD CASTER SWIVEL MOUNT LH HHCS 1/2-13X2 GR5 HSFCHCS 1/2-13X2 GR8 PLT CASTER LOCK PLT LH HARDENED CASTER LOCK PLT RH HARDENED 40HD CASTER LOCK PLATE LH HARD 40HD CASTER LOCK PLATE RH HARD HHCS 3/4-10X10 GR5 HHCS 3/4-10X12 GR5 PLT CYL REP 4.75X16X1.5 ROD (TIE) CYLINDER LOCK CHANNEL 1 1/2X16 NUT HEX NYLOCK 5/8-11 PLT GREASE ZERK STRAIGHT 1/4-28 NUT HEX FLANGE 3/4-16 PLT CYL PIN NR 1.25X3.09X2.63 W/GR CYL PIN NR 1.25X3.63USBX3.13CH PIN COTTER 1/4 X 2 1/2 PLT TIRE/WHL NHS 10 BOLT CYL 1.5X2.5X.75 ROD (TIE ROD) S/N(1063TT-) S/N(1064TT+) S/N(1063TT-) S/N(1063TT-) S/N(1064TT+) S/N(1064TT+) S/N(1063TT-) S/N(1064TT+) Shown S/N(1063TT-) S/N(1064TT+) S/N(1063TT-) S/N(1063TT-) S/N(1064TT+) Shown S/N(1064TT+) S/N(1063TT-) S/N(1064TT+) Refer to "Rockshaft" for breakdown 09/13/ P

28 Table of Contents Gauge Wheel (continued) Part Number Index Ref Part No C C K C C C C C D D C C C C C C C C C H C C C C C C C C D C Part Description NUT HEX FLANGE LOCK 3/4-10 PLT MIDWAY ROD CLEVIS 3/4-16 UNF 3N40HD 10 BOLT HUB AND SPINDLE SPRING COMP 1.88OD x.362w SPRING COMP 1.4OD.162W 3LG HHCS 1/4-28X3/8 GR5 HHCS 1-8X5 1/2 GR5 NUT HEX SIDE LOCK 1-8 PLT 3N40 HD BLK SED CSTR VER SHAFT 4 1/2 CASTER VERTICAL SHAFT PIN COTTER 5/16 X 2 1/2 PIN 3/4 X 4 13/32 USEABLE CYL REP 5X20X2 ROD (TIE) WASHER FLAT 1 1/4 SAE PLT HHCS 3/4-10X5 1/2 GR5 NUT LOCK 3/4-10 PLT NUT HEX JAM 3/4-10 PLT HHCS 1-8X3 GR5 NUT HEX JAM 1-8 PLT HOSE LOOP 2 5/8 WITH TAB NUT HEX 5/8-11 PLT WASHER LOCK SPRING 5/8 PLT HHCS 5/8-11X1 3/4 GR5 HHCS 5/8-11X5 GR5 PIN 3/8 X 3 USABLE LW/PIN WASHER FLAT 3/4 SAE PLT WASHER MACH 1.19 X.63 X 18GA PIN COTTER 3/16 X 1 3/4 PLT 4 1/2 PIVOT THRUST WASHER PIVOT THRUST WASHER Comments Refer to "Rockshaft" for breakdown S/N(1063TT-) S/N(1064TT+) S/N(1064TT+) S/N(1063TT-) Revision P /13/18

29 Table of Contents Part Number Index Rockshaft Gauge Wheel (continued) This Page Intentionally Left Blank 09/13/ P

30 Table of Contents Gauge Wheel Striker Plate Part Number Index P /13/18

31 Table of Contents Part Number Index Rockshaft Gauge Wheel Striker Plate Ref. Part No. Part Description Comments Revision dwg C D D C H H D D C C C D C C C D C C C D C C H C C C C C C D C D D C C C Image No. U-BOLT 5/8-11 X 4 1/32 X 3 3/8 TONGUE SPACER SHIM WING RUB BLOCK NUT HEX 5/8-11 PLT 3N40 HD CASTER SWIVEL MOUNT RH 3N40 HD CASTER SWIVEL MOUNT LH TUBE RND 1 1/4ODX3/16X1.05 GW SWIVEL LOCK LUG HHCS 3/8-16X2 GR5 HHCS 7/8-9X5 GR5 PIN SPIROL 1/2X2 1/2 PLAIN GW SWIVEL LOCK SPREADER LINK WASHER LOCK SPRING 7/8 PLT HHCS 7/8-9X2 3/4 GR8 NUT LOCK 5/8-11 PLT GW SWIVEL LOCK SLOT LINK WASHER FLAT 5/8 USS PLT HHCS 5/8-11X2 3/4 GR5 SPRING EXT 1 7/8ODX8 3/8X.25W GW SWIVEL LOCK CYL ROD PLT NUT HEX JAM 3/4-16 UNF PLT CYL 1.5X2.5X.75 ROD (TIE ROD) HOSE LOOP 2 5/8 WITH TAB HHCS 5/8-11X1 3/4 GR5 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT HHCS 3/8-16X1 GR5 WASHER LOCK SPRING 3/8 PLT WASHER FLAT 3/8 USS PLT SPRING ANCHOR ANGLE NUT HEX 3/8-16 PLT SLEEVE IDLER PIVOT BOX MOUNTING TUBE CLOSED EYE BOLT 3/8-16X4 1/2 NUT HEX 7/8-9 PLT NUT LOCK 3/8-16 NYLON INSERT Shown Refer to "Hydraulic Cylinder ( C 1.5 x 2.5 x.75 Rod)" for breakdown 09/13/ P

32 Table of Contents HD10 Series Opener Arms & Mounts Part Number Index P /13/18

33 Table of Contents Part Number Index Openers HD10 Series Opener Arms & Mounts Ref. Part No. Part Description Comments Revision dwg H C C C D H C D D H C C H C H H C D C C C D Image No. HD10P OPENER WELDMENT HFS 1/2-13X6 1/8GR5 PLT PARALLEL ARM PIVOT BUSHING NUT HEX FLG. LOCK 1/2-13 PLT. 25P UPPER SPRING LINK 25 SERIES UPPER PARALLEL ARM SPRING EXT 1.575O.D.X.225 WIRE 25P LOWER SPRING LINK 25P REAR OPENER INNER PIVOT TB 25 SERIES LOWER PARALLEL ARM U-BOLT 5/8-11 X 7 1/32 X 6 1/2 NUT HEX 5/8-11 PLT 25P FRONT OPENER MOUNT WELDMT WASHER LOCK SPRING 5/8 PLT HD10P REAR OPENER MOUNT WELDMT LOCKUP PIN FOR 10HD OPENER PIN LINCH 3/16 X 1 9/16 LONG 25P UP FLOAT LIMITER HHCS 3/8-16X1 1/4 GR5 WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT 3 13/32 SPRING STRAP Used with dual springs Used with dual springs Used with single springs 09/13/ P

34 Table of Contents Part Number Index HD10 Series Opener Body (S/N C1002M-) P /13/18

35 Table of Contents Part Number Index Openers HD10 Series Opener Body (S/N C1002M-) Ref. Part No. Part Description Comments Revision dwg H C C C C C C C S C C H C C D C V C C C S D C C D H C C C C C C D Image No. PIN ROLL 5/16 X 5/8 PLT HD10P OPENER WELDMENT CABLE TIE.19X D 50LB PIN COTTER 3/32 X 1 LONG T-HANDLE ASSEMBLY PIN ROLL 5/32 X 5/8 PLT SPRING.540 O.D.X 1 1/4 X.054W OPENER TRUNION PIN CLEVIS 3/8 X 2 1/8 USABLE SEED TUBE FPU TUBE & CLIP PIN ROLL 5/16 X 7/8 PIN ROLL 5/16 X 5/8 PLT 25P SCRAPER SEPARATOR WLDMT RHSNB 5/16-18X3/4 GR5 NUT HEX WHIZ 5/16-18 PLT SHIELD, DISK WASHER MACH 1.19 X.63 X 18GA BEARING AA205DD 4.0 MM 15 DISK (21 DEG BEVEL) RIBB BRG FLNG.266 MT HOLE PLT RIVET,BUTTON HEAD 1/4 X 1/2 4.0 MM 15 DISC W/ 5/8 ASSY DD BRG FLANGE DUST COVER HHCS 5/8-11X1 1/2 GR5 NYL PIN CLEVIS 1/4 X 2 55/64 USBL HD10 OPENER SEED TUBE TOP CAP TRASH GUARD WELDMENT UPPER SEED TUBE CAP NUT HEX FLG. LOCK 1/2-13 PLT. RHSNB 1/2-13X1 GR5 AIR DRILL DD OPNR HOSE BOOT SCREW HEX SLT 10-16X3/4PTHD CT SEED TUBE 25S FPU TB&CAP NO HL SEED TUBE 25S HOOK CLIP Includes items 32 & 33 Used with Unit Mount Coulter Used with Frame Mount Coulter 09/13/ P

36 Table of Contents Part Number Index HD10 Series Opener Body (S/N C1003M+) P /13/18

37 Table of Contents Part Number Index Openers HD10 Series Opener Body (S/N C1003M+) Ref. Part No. Part Description Comments Revision dwg H C C C C C C C S C C C C C D C V C C C S D C C C H C C C C D D C D C C Image No. HD10P OPENER WELDMENT CABLE TIE.19X D 50LB PIN COTTER 3/32 X 1 LONG T-HANDLE ASSEMBLY PIN ROLL 5/32 X 5/8 PLT SPRING.540 O.D.X 1 1/4 X.054W OPENER TRUNION PIN CLEVIS 3/8 X 2 1/8 USABLE HD10 DRILL SEED TUBE ASSEMBLY PIN ROLL 5/16 X 7/8 PIN ROLL 5/16 X 5/8 PLT LOWER SCRAPER RETROFIT H RHSNB 5/16-18X3/4 GR5 NUT HEX WHIZ 5/16-18 PLT SHIELD, DISK WASHER MACH 1.19 X.63 X 18GA BEARING AA205DD 4.0 MM 15 DISK (21 DEG BEVEL) RIBB BRG FLNG.266 MT HOLE PLT RIVET,BUTTON HEAD 1/4 X 1/2 4.0 MM 15 DISC W/ 5/8 ASSY DD BRG FLANGE DUST COVER HHCS 5/8-11X1 1/2 GR5 NYL PIN CLEVIS 1/4 X 2 55/64 USBL CLAMP HOSE 1 1/2 NO. 24 TRASH GUARD WELDMENT SEED HOSE 56 RIBS X 11 LONG NUT HEX FLG. LOCK 1/2-13 PLT. RHSNB 1/2-13X1 GR5 UPPER SEED TUBE CAP HD10 DRILL SEED TUBE TOP CHNL HD10 DRILL SEED TB LOWR STRAP 00HD OPENER SEED TUBE 00HD SEED TUBE CLIP SEED FLAP, RUBBER, SEED-LOK SCREW HEX SLT 10-16X3/4PTHD CT Includes Used with Unit Mount Coulter Used without Coulter 09/13/ P

38 Table of Contents Part Number Index HD10 Series Keeton Seed Firmer (Option) P /13/18

39 Table of Contents Part Number Index Openers HD10 Series Keeton Seed Firmer (Option) Ref. Part No. Part Description Comments Revision dwg BXT C C C C C Image No. KEETON NARROW TAIL BRACKET FOR C REV A&B RHSNB 3/8-16X1 3/4 GR5 NUT HEX 3/8-16 PLT WASHER LOCK SPRING 3/8 PLT NUT HEX WHIZ 5/16-18 PLT HHCS 5/16-18X2 1/2 GR5 09/13/ P

40 Table of Contents HD10 Series Seed-Lok (Option) Part Number Index P /13/18

41 Table of Contents Part Number Index Openers HD10 Series Seed-Lok (Option) Ref. Part No. Part Description Comments Revision dwg C D C H D C C D C D C C A C C C S C C D D Image No. PIN COTTER 5/32 X 1 1/4 LG LEVER, SEED LOK SPRING.540 O.D.X 1 1/4 X.054W LOCK ROD WELD SEED LOK MOUNT RHSNB 5/16-18X3/4 GR5 NUT HEX WHIZ 5/16-18 PLT JD KINZE SEED LOK LOWER MOUNT SNAP RING 1/2 EXTERNAL HEAVY SEED LOK WHEEL ARM SCR HX SKT BUT CP 3/8-16X3/4 WASHER INTERNAL STAR 3/8 PLT. RPBY V SCR PH THD FMG #10X1/2 TP ZP RETAINER W/BONDED SEAL 4BLT 5/8 X 6 SEED LOK WHEEL 6 SEED LOK ASSEMBLY WASHER 1.5 X.51 X.187 SPRING EXT 1 X 4 X.135 WD SEED LOK PIVOT PIN LEVER STOP 09/13/ P

42 Coulter Table of Contents Part Number Index P /13/18

43 Coulter Table of Contents Part Number Index Openers Ref. Part No. Part Description Comments Revision dwg S H C C C C D C D C C D C C C C C C C V D C S C C C C C C C C C C C D C C D D C C C Image No. CLTR CASTING ASSY CLTR SWING ARM WLMT WASHER MACH 1 1/4X3/4X14GA SNAP RING 3/4 EXTERNAL HEAVY EYE BOLT 3/4-10X14 3/4 LG SP WASHER MACH 1 7/8X1 1/4X 14GA SPRING 2.25 O.D. X.5 COIL COULTER SPRING GUIDE TUBE COULTER SPRING WASHER GREASE ADAPT 1/4-28M X 1/4 TB BUSHING 1X3/4X1 1/8 FLG HD LONG COULT. SPRING BAR HHCS 7/8-9X3 GR5 WASHER LOCK SPRING 7/8 PLT NUT HEX 7/8-9 PLT RHSNB 1/2-13X1 1/4 GR5 OIL-SEAL DOUBLE LIP BEARING CONE LM BEARING CUP LM COULTER HUB & CUP ASSY HUB GREASE CAP GREASE ZERK STRAIGHT 1/4-28 COULTER HUB PACKAGE PIN COTTER 3/16 X 1 3/4 PLT COULTER BLADE FLUTED 17 COULTER BLADE 5/8 WAVY 17 COULTER BLADE 3/4 WAVY 18 INCH TURBO COULTER BLADE 5/8 WAVY TURBO BLADE WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT WASHER SPINDLE - 7/8 NUT HEX SLOTTED 7/8-14 PLT U-BOLT 5/8-11 X 4 1/32 X 4 COULTER CLAMP BAR NUT HEX 5/8-11 PLT SNAP RING EXT 1 1/4 HEAVY OFFSET COULTER MOUNT PLATE OFFSET COULTER BRKT F/LH BOX WASHER LOCK SPRING 5/8 PLT HHCS 1/2-13X1 3/4 GR5 NUT HEX JAM 3/4-10 PLT 09/13/ P

44 Table of Contents Coulter Tine (Option) Part Number Index P /13/18

45 Table of Contents Part Number Index Openers Coulter Tine (Option) Ref. Part No. Part Description Comments Revision dwg C C C D C C C C D C C Image No. HHCS 7/8-9X3 1/2 GR5 HHCS 7/8-9X5 1/2 GR5 2SNT COULTER TINE COULTER TINE MOUNT PLATE REAR HHCS 3/8-16X1 1/2 GR5 WASHER FLAT 3/8 USS PLT WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT COULTER TINE OFFST MNT SPACER WASHER LOCK SPRING 7/8 PLT NUT HEX 7/8-9 PLT 09/13/ P

46 Grease Bank Table of Contents Part Number Index P /13/18

47 Grease Bank Table of Contents Part Number Index Openers Ref. Part No. Part Description Comments Revision dwg C C R C C C C C C D C Image No. GREASE ZERK STRAIGHT 1/8-27NPT AD PUSH 1/4 TUBE 1/8 FNPT TUBE NYLON 1/4OD X 062WL FTG TUBE,CONNECTOR 1/8 MNPT FTG ADAPTER,1/8 FNPT X 1/4-28M HHCS 1/4-20X3/4 GR5 WASHER FLAT 1/4 SAE PLT WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT GREASE BANK MOUNT GREASE ADAPT 1/4-28M X 1/4 TB 09/13/ P

48 Table of Contents Part Number Index HD10 1 1/4" x 13 1/2" Double Press Wheel P /13/18

49 Table of Contents Part Number Index Press Wheels HD10 1 1/4" x 13 1/2" Double Press Wheel Ref. Part No. Part Description Comments Revision dwg C C D C H H C C C D C C C C C Image No. HFS 1/2-13X3 3/4 GR5 SPTHD NUT HEX FLG. LOCK 1/2-13 PLT. PRESS WHEEL PIVOT TUBE PARALLEL ARM PIVOT BUSHING 10HD DBL PW ARM WELDMENT RH 10HD DBL PW ARM WELDMENT LH HHCS 5/8-11X3 GR5 WASHER LOCK SPRING 5/8 PLT 1.25 X 13.5 PRESS WHEEL ASSY 1/4 PW SPACER 5/8 DIA HHCS 1/4-20X1 GR5 NUT HEX LOCK 1/4-20 FLG 1.25X13.5 ANGLE PEAK TIRE 1 X 12 PRESS WHEEL RIM HALF BRG.63ID PRESS WHL ASY Includes items 10 through 14 09/13/ P

50 Table of Contents HD10 1" x 12" Double "V" Press Wheel Part Number Index P /13/18

51 Table of Contents Part Number Index Press Wheels HD10 1" x 12" Double "V" Press Wheel Ref. Part No. Part Description Comments Revision dwg C C D C H C C C C C C C C Image No. HFS 1/2-13X3 3/4 GR5 SPTHD NUT HEX FLG. LOCK 1/2-13 PLT. PRESS WHEEL PIVOT TUBE PARALLEL ARM PIVOT BUSHING NG 1X12 PRESS WHEEL ARM HHCS 5/8-11X2 1/2 GR5 WASHER LOCK SPRING 5/8 PLT 1 X 12 PRESS WHL ASSY-5203BRG HHCS 1/4-20X1 GR5 1 X 12 PRESS WHEEL RIM HALF TIRE RUBBER 1 X 12 BRG.63ID PRESS WHL ASY NUT HEX LOCK 1/4-20 FLG Includes items 9 through 13 09/13/ P

52 Table of Contents HD10 2" x 13" Single Press Wheel Part Number Index P /13/18

53 Table of Contents Part Number Index Press Wheels HD10 2" x 13" Single Press Wheel Ref. Part No. Part Description Comments Revision dwg C C D C D C C C C C C C C Image No. HFS 1/2-13X3 3/4 GR5 SPTHD NUT HEX FLG. LOCK 1/2-13 PLT. PRESS WHEEL PIVOT TUBE PARALLEL ARM PIVOT BUSHING NG UNIVERSAL PRESS WHEEL ARM WASHER LOCK SPRING 5/8 PLT HHCS 5/8-11X2 1/2 GR5 2 X 13 PRESS WHEEL ASSEMBLY BRG.63ID PRESS WHL ASY HHFS 1/4-20 X 1 1/2 GR 5 NUT HEX LOCK 1/4-20 FLG 2 X 13 PRESS WHEEL RIM HALF 2 X 13 PRESS WHEEL TIRE Includes items 9 through 13 09/13/ P

54 Table of Contents HD10 3" x 13" Single Press Wheel Part Number Index P /13/18

55 Table of Contents Part Number Index Press Wheels HD10 3" x 13" Single Press Wheel Ref. Part No. Part Description Comments Revision dwg C C D C D C C C C C C C C Image No. HFS 1/2-13X3 3/4 GR5 SPTHD NUT HEX FLG. LOCK 1/2-13 PLT. PRESS WHEEL PIVOT TUBE PARALLEL ARM PIVOT BUSHING NG UNIVERSAL PRESS WHEEL ARM WASHER LOCK SPRING 5/8 PLT HHCS 5/8-11X2 1/2 GR5 3 X 13 PRESS WHEEL ASSEMBLY BRG.63ID PRESS WHL ASY HHFS 1/4-20 X 2 GR 5 NUT HEX LOCK 1/4-20 FLG 3 X 13 PRESS WHEEL RIM HALF 3 X 13 PRESS WHEEL TIRE Includes items 9 through 13 09/13/ P

56 Table of Contents HD10 3" x 14" Single Press Wheel Part Number Index P /13/18

57 Table of Contents Part Number Index Press Wheels HD10 3" x 14" Single Press Wheel Ref. Part No. Part Description Comments Revision dwg C C D C D C C S C C C D C D C C Image No. HFS 1/2-13X3 3/4 GR5 SPTHD NUT HEX FLG. LOCK 1/2-13 PLT. PRESS WHEEL PIVOT TUBE PARALLEL ARM PIVOT BUSHING NG 3X14 PRESS WHEEL ARM WASHER LOCK SPRING 5/8 PLT HHCS 5/8-11X3 1/4 GR5 3 X 14 PEAKED P.W. ASSEMBLY LARGE SPACER TUBE HHCS 5/16-18X2 3/4 GR5 NUT HEX FLG TP LK 5/16-18ZNYCR 4X12 PW RIM HALF TIRE 3 X 14 PW PEAKED SMALL SPACER TUBE BRG INS.63IDX1.57OD DBL LIP 3 X 14 RIM SPACER RING 09/13/ P

58 Table of Contents Lift and Fold Hydraulics Part Number Index P /13/18

59 Table of Contents Part Number Index Hydraulics Lift and Fold Hydraulics Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C D C C C C C C C C C C C C C C C C C C C C R C C C C C C C Image No. EL 3/4MJIC 3/4MORB EL 45 3/4MJIC 3/4FJIC EL 45 3/4MORB 3/4MJIC TE 1 1/16 MJIC EL 3/4FJIC 3/4MJIC AD 1 1/16 FJICS 3/4MJIC EL 1 1/16MJIC 1 1/16MORB VALVE, STROKE CTRL 35 GPM -12 TE 3/4MORB 3/4MJIC 3/4MJIC ORIFICE PLATE 1/16 3/4 AD 1 1/16 FORB 3/4 MORB TE 3/4MJIC EL 90 3/4MJIC HH3/4R MORB HH1/2R /4MORB 3/4FJIC HH1/2R /4FJIC HH1/2R /4FJIC HH1/2R /4FJIC HH1/2R /4FJIC 3/4FJIC HH1/2R /4FJIC HH3/4R FJIC HH1/2R /4FJIC CYL REP 5X16X1.5 ROD (TIE) CYL REP 4.75X16X1.5 ROD (TIE) CYL REP 5X20X2 ROD (TIE) CYL REP 5X24X2 ROD (TIE) HH3/4R MORB 1.06FJIC CP 3/4FORB MALE QD POPPET TYPE HH1/2R /4 FJIC HH1/2R /4FJIC SPIRAL HOSE WRAP 2.00 DIA HH1/2R /4MORB HH3/4R /16MORB CP 3/4FORB QD BH CP 1 1/16 FORB QD FEMALE CP 1 1/16 FORB QD MALE CYL REP 4.5X16X1.5 ROD (TIE) HH1/2R /4FJIC Refer to "Stroke Control Valve ( )" for breakdown Refer to "Hydraulic Cylinder ( C 5x16x1.5 Rod)" for breakdown Refer to "Hydraulic Cylinder ( C 4.75x16x1.5 Rod)" for breakdown Refer to "Hydraulic Cylinder ( C 5x20x2 Rod)" for breakdown Refer to "Hydraulic Cylinder ( C 5x24x2 Rod)" for breakdown Fan and Auger Circuit Fan and Auger Circuit 09/13/ P

60 Table of Contents Lock Cylinder Hydraulics Part Number Index P /13/18

61 Table of Contents Part Number Index Hydraulics Lock Cylinder Hydraulics Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C C C C C C Image No. TE 9/16MJIC CR 9/16MJIC TE 9/16MORB 9/16MJIC 9/16MJIC EL 9/16MJIC 9/16FJIC EL 9/16MJIC 9/16MORB HH1/4R /16MORB 9/16FJIC HH1/4R /16FJIC HH1/4R /16FJIC HH1/4R /16FJIC HH1/4R /16FJIC HH1/4R /16FJIC CYL 1.5X2.5X.75 ROD (TIE ROD) MIDWAY ROD CLEVIS 3/4-16 UNF AD 3/4MORB 9/16FORB CP 3/4FORB MALE QD POPPET TYPE Refer to "Hydraulic Cylinder ( C 1.5x2.5x.75 Rod") for breakdown 09/13/ P

62 Table of Contents Part Number Index Hydraulic Cylinder ( C 5x20x2 Rod) P /13/18

63 Table of Contents Part Number Index Hydraulics Hydraulic Cylinder ( C 5x20x2 Rod) Ref. Part No. Part Description Comments Revision dwg M7028 2S8694 3R9612 4R9109 5R9928 6R9171 7M8328 2A C C C C Image No. MIDWAY CLEVIS ROD MIDWAY 5X20X2.0 MW HEAD PISTON MIDWAY MIDWAY TUBE BASE MIDWAY TIE ROD MIDWAY MW WIPER U-CUP O-RING MW BACK UP TEFLON SEAL O-RING LOADER MIDWAY WEAR RING MW O-RING MW PISTON NUT 1 1/4'"-12 UNF NUT HEX 3/4-16 PLAIN NUT HEX 3/8-16 PLAIN HHCS 3/8-16X1 3/4 GR5 SEAL KIT MW (4A9106) Only available in item 20 Only available in item 20 Only available in item 20 Only available in item 20 Only available in item 20 Only available in item 20 Only available in item 20 Only available in item 20 09/13/ P

64 Table of Contents Part Number Index Hydraulic Cylinder ( C 5x24x2 Rod) P /13/18

65 Table of Contents Part Number Index Hydraulics Hydraulic Cylinder ( C 5x24x2 Rod) Ref. Part No. Part Description Comments Revision dwg M7028 2S8698 3R9612 4R9109 5R9932 6R9169 7M8332 2A C C C C Image No. MIDWAY CLEVIS ROD MIDWAY 5X24X2.0 MW HEAD PISTON MIDWAY MIDWAY TUBE BASE MIDWAY TIE ROD MIDWAY MW WIPER U-CUP O-RING MW BACK UP TEFLON SEAL O-RING LOADER MIDWAY WEAR RING MW O-RING MW PISTON NUT 1 1/4'"-12 UNF NUT HEX 3/4-16 PLAIN NUT HEX 3/8-16 PLAIN HHCS 3/8-16X1 3/4 GR5 SEAL KIT MW (4A9106) Only available in item 20 Only available in item 20 Only available in item 20 Only available in item 20 Only available in item 20 Only available in item 20 Only available in item 20 Only available in item 20 09/13/ P

66 Table of Contents Part Number Index Hydraulic Cylinder ( C 4.5x16x1.5 Rod) P /13/18

67 Table of Contents Part Number Index Hydraulics Hydraulic Cylinder ( C 4.5x16x1.5 Rod) Ref. Part No. Part Description Comments Revision dwg M7028 2S7584 3R7512 4R7112 5R7124 6R7191 7M7324 2A C C C C Image No. MIDWAY CLEVIS ROD MIDWAY HEAD MIDWAY PISTON MIDWAY TUBE MIDWAY BASE MIDWAY MW TIE ROD MW WIPER U-CUP 0-RING BACK-UP MIDWAY SEAL, TEFLON MIDWAY O-RING LOADER MIDWAY WEAR RING MIDWAY MW O-RING MW PISTON NUT 1 1/4'"-12 UNF NUT HEX 3/4-16 PLAIN NUT HEX 3/8-16 PLAIN HHCS 3/8-16X1 3/4 GR5 SEAL KIT MW 4.5 RPHCYL 4A7104 Only available in item 20 Only available in item 20 Only available in item 20 Only available in item 20 Only available in item 20 Only available in item 20 Only available in item 20 Only available in item 20 09/13/ P

68 Table of Contents Part Number Index Hydraulic Cylinder ( C 4.75x16x1.5 Rod) P /13/18

69 Table of Contents Part Number Index Hydraulics Hydraulic Cylinder ( C 4.75x16x1.5 Rod) Ref. Part No. Part Description Comments Revision dwg M7028 2S8522 3R8512 4R8108 5R8124 6R8171 7M8324 2A C C C C Image No. MIDWAY CLEVIS ROD MIDWAY MIDWAY HEAD F/ 4 3/4 CYL PISTON MIDWAY TUBE MIDWAY BASE MIDWAY TIE ROD MIDWAY MW WIPER U-CUP O-RING MIDWAY MW BACK UP SEAL, TEFLON MIDWAY O-RING LOADER MIDWAY WEAR RING MIDWAY MW O-RING MW PISTON NUT 1 1/4'"-12 UNF NUT HEX 3/4-16 PLAIN NUT HEX 3/8-16 PLAIN HHCS 3/8-16X1 3/4 GR5 SEAL KIT MW 4.75 RPHCYL 4A8104 Only available in item 20 Only available in item 20 Only available in item 20 Only available in item 20 Only available in item 20 Only available in item 20 Only available in item 20 Only available in item 20 09/13/ P

70 Table of Contents Part Number Index Hydraulic Cylinder ( C 5x16x1.5 Rod) P /13/18

71 Table of Contents Part Number Index Hydraulics Hydraulic Cylinder ( C 5x16x1.5 Rod) Ref. Part No. Part Description Comments Revision dwg M7028 2S8522 3R9512 4R9108 5R9124 6R9171 7M8324 2A C C C C Image No. MIDWAY CLEVIS ROD MIDWAY MIDWAY HEAD PISTON MIDWAY TUBE MIDWAY BASE MIDWAY TIE ROD MIDWAY MW WIPER U-CUP O-RING MW BACK UP SEAL, TEFLON MIDWAY O-RING LOADER MIDWAY WEAR RING MIDWAY MW O-RING MW PISTON NUT 1 1/4'"-12 UNF NUT HEX 3/4-16 PLAIN NUT HEX 3/8-16 PLAIN HHCS 3/8-16X1 3/4 GR5 SEAL KIT MW (4A9104) Only available in item 20 Only available in item 20 Only available in item 20 Only available in item 20 Only available in item 20 Only available in item 20 Only available in item 20 Only available in item 20 09/13/ P

72 Table of Contents Part Number Index Hydraulic Cylinder ( C 1.5x2.5x.75 Rod) P /13/18

73 Table of Contents Part Number Index Hydraulics Hydraulic Cylinder ( C 1.5x2.5x.75 Rod) Ref. Part No. Part Description Comments Revision dwg M1190 2A0014 3M C 2A0130 2A0202 6M1108 7M1302 5M1103 2A0018 4M C Image No. MW ROD WIPER SEAL BACKUP O-RING MW TIE ROD NUT MW HEAD WASHER FLAT 5/8 SAE PLT MW COTTER PIN MW CLEVIS PIN MW BASE O-RING MW TIE ROD MW TUBE MW TIE ROD NUT MW PISTON BACKUP SEAL KIT MW 3A1102 Only available in item 17 Only available in item 17 Only available in item 17 Only available in item 17 Only available in item 17 09/13/ P

74 Table of Contents Stroke Control Valve ( C) Part Number Index P /13/18

75 Table of Contents Part Number Index Hydraulics Stroke Control Valve ( C) Ref. Part No. Part Description Comments Revision dwg C Image No. SHOEMAKER BODY SHOEMAKER ASM., PLUG ADAPTER SHOEMAKER POPPET SEAL KIT SHOEMAKER # /13/ P

76 Table of Contents Double Selector Valve( C) Part Number Index P /13/18

77 Table of Contents Part Number Index Hydraulics Double Selector Valve( C) Ref. Part No. Part Description Comments Revision dwg C C 1084 Image No. DOUBLE SELECTOR VALVE 3/4FORB RPBY SEAL KIT RPBY SEAL KIT C SHOEMAKER O-RING BUNA N 70DURO SH GROOVE PIN BLACK VINYL GRIP SH PIN, SPRING 0.25 DIAMETER 09/13/ P

78 Decals Table of Contents Part Number Index P /13/18

79 Decals Table of Contents Part Number Index Decals Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C C C C C Image No. DECAL DANGER CRUSH TRCTR & 3PT DECAL PIC READ MANUAL DECAL WARNING HIGH PRESSUR SML DECAL LIFT CYL OPERATING INSTR DECAL CAUTION OPERATIONAL MACH DECAL WARNING 20 MPH TRANS LRG DECAL 25P GROUND TO FRAME DIST DECAL REFLECTOR AMBER 1 1/2X9 DECAL CAUTION TIRE 85 PSI /265 DECAL REFLECTOR RED 1 1/2X9 DECAL REFLECTR DAYTIME 1 1/2X9 DECAL CAUTION TIRES NOT A STEP DECAL WARNING PINCH PT/CRUSH DECAL GP ON LOGO SPRAYER 09/13/ P

80 Monitor Table of Contents Part Number Index P /13/18

81 Monitor Table of Contents Part Number Index Monitor Ref. Part No. Part Description Comments Revision dwg S S S Image No. 40' HITCH HARNESS INT AG HARNESS, WSMB MODULE INTAG WSMB/FLW MNTR MODULE 18R 10' EXT HARNESS DJ 20' HARNESS EXT ISO SYS CAN INT AG 25' HARNESS, WSMB EXT 3' REAR HITCH HARNESS TY WRAP BUNDLE 10-7'" & 20-14'" TY WRAP BUNDLE 50-14'" TY WRAP BUNDLE 28-7'" & 20-14'" TY WRAP BUNDLE '" RECON II VIGILENSE BLOCKAGE SENSOR 25MM DUST PLUG 12 ROW HARNESS 3N40 QUICKSTART GUIDE Rev. 1 Rev. 2 09/13/ P

82 Tower Table of Contents Part Number Index P /13/18

83 Tower Table of Contents Part Number Index Tower Ref. Part No. Part Description Comments Revision dwg C R C C H C C C C C C C C D C C D D C C C S D D C C C C Image No. U-BOLT 1/2-13X4 1/32X4 SEED HOSE 2 1/2 ID KANAFLEX 2 1/2 AIR HOSE BAND CLAMP U-BOLT 1/2-13 X 2 1/2 X 3 1/2 DESTRIBUTION TOWER WELDMENT WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT NUT HEX NYLOCK 5/16-18 PLT WASHER FLAT 5/16 USS PLT PVC SEED HOSE 1 IN/FT 11 OUTLET SEED DIST. RING 8 OUTLET SEED DIST. RING DIST TOWER DIVIDER DIST. TOWER TOP CAP HHCS 5/16-18X3/4 GR5 HHCS 5/16-18X3 GR5 NTA35 DIST TOWER MOUNT DIST TOWER MODULE MOUNT PLATE HHCS 1/4-20X1 1/4 GR5 NUT-HEX 1/4-20 PLT WASHER LOCK SPRING 1/4 PLT INTAG WSMB/FLW MNTR MODULE 18R CENTER AIR TOWER MOUNT PLATE CENTER TOWER MOUNT BOLT PLATE HHCS 1/2-13X3 1/2 GR5 SFCHMS X 3/4 TOWER HOLD DOWN RING NUT HEX NYLOCK PLT 09/13/ P