Grapples SGC1560, SGC1572 & SGC P Parts Manual. Copyright 2018 Printed 07/11/18

Transcription

1 Grapples SGC1560, SGC1572 & SGC P Parts Manual Read the Operator's Manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! Copyright 2018 Printed 07/11/18 Cover photo may show optional equipment not supplied with standard unit.

2 Table of Contents Section 1: Introduction...4 Using This Manual...4 Manual Replacement Information...4 Manual Revisions...4 Touch-up Paint...4 Hardware Legend...5 Replacement Hardware...5 Serial Numbers...5 Part Number Service Coding...5 Section 2: Main Assembly...6 Grapple & Claw Frame...6 Hydraulic Components...8 Hydraulic Cylinder ( C) Cross...10 Hydraulic Cylinder ( C) Monarch...12 Section 3: Decals...14 Decal Placement...14 Touch-up Paints...16 Section 4: Options & Accessories...18 SGC Hose Bundle Kubota SVL...18 Third Function Hose Kit A...20 Third Function Valve Kit A for Kubota MX MX MX MX MX58OO...22 & MX Copyright All rights reserved. provides this publication as is without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. The illustrations in this manual are not intended for safe and proper assembly or disassembly of equipment. The illustrations are intended for ordering parts only. is registered trademark. All other brands and product names are trademarks or registered trademarks of their respective holders. Printed in the United States of America. 2 SGC1560, SGC1572 & SGC1584 Grapples P 07/11/18

3 D G H L S T Decal Placement...14 Grapple & Claw Frame...6 Hydraulic Components...8 Hydraulic Cylinder ( C) Cross...10 Hydraulic Cylinder ( C) Monarch...12 Touch-up Paints...16 SGC Hose Bundle Kubota SVL...18 Third Function Hose Kit A...20 Third Function Valve Kit A for Kubota MX4700, MX4800, MX5100, MX5200, MX58OO, & MX Alphabetized Table of Contents 07/11/18 SGC1560, SGC1572 & SGC1584 Grapples P 3

4 4 SGC1560, SGC1572 & SGC1584 Grapples P 07/11/18

5 07/11/18 SGC1560, SGC1572 & SGC1584 Grapples P 5

6 Grapple & Claw Frame Section 2: Main Assembly SGC1560, SGC1572 & SGC1584 Grapples P 07/11/18

7 Grapple & Claw Frame Section 2: Main Assembly Ref. Part No. Part Description Comments Revision dwg H H H H H H H C C C C C C Drawing Image Number PIVOT PIN GRAPPLE FRAME, 60 GRAPPLE FRAME, 72 GRAPPLE FRAME, 84 GRAPPLE JAW, 60 GRAPPLE JAW, 72 GRAPPLE JAW, 84 GREASE ZERK 1/4-28 THD FORMING HHCS 1/2-13X1 3/4 GR5 NUT HEX FLG LOCK 1/2-13 PLT NUT HEX WHIZ 1/4-20 PLT U-BOLT 1/4-20 X 2 9/32 X 3 GR2 BHG 50ODX25X38 07/11/18 SGC1560, SGC1572 & SGC1584 Grapples P 7

8 Hydraulic Components Section 2: Main Assembly SGC1560, SGC1572 & SGC1584 Grapples P 07/11/18

9 Hydraulic Components Section 2: Main Assembly Ref. Part No. Part Description Comments Revision Dwg H C C C C C C C C C C C C C C C C C C Drawing Image Number PIVOT PIN HHCS 1/2-13X1 3/4 GR5 NUT HEX FLG LOCK 1/2-13 PLT CYL 3X10X1 1/4 (WLD) W/BSHGS EL 3/4MJIC 3/4MORB TE 3/4MJIC HH1/2R /4FJIC(1 90) TC HH1/2R /4FJIC(1 90) TC HH1/2R /4FJIC(1 90) TC HH1/2R /4FJIC(1 90) TC HH1/2R /4FJIC(1 90) TC HH1/2R /4FJIC(1 90) TC HH1/2R /4FJIC TC HH1/2R /4FJIC TC HH1/2R /4FJIC TC HH1/2R /4FJIC TC HH1/2R /4FJIC TC HH1/2R /4FJIC TC ORAD 1/8 3/4MJIC 3/4 FJIC SGC15/2060 SGC15/2072 SGC15/2084 SGC15/2060 SGC15/2072 SGC15/2084 SGC15/2060 SGC15/2072 SGC15/2084 SGC15/2060 SGC15/2072 SGC15/ /11/18 SGC1560, SGC1572 & SGC1584 Grapples P 9

10 Hydraulic Cylinder ( C) Cross Section 2: Main Assembly SGC1560, SGC1572 & SGC1584 Grapples P 07/11/18

11 Hydraulic Cylinder ( C) Cross Section 2: Main Assembly Ref. Part No. Part Description Comments Revision Dwg C 2A C4360 N/A 4C6421 N/A 4C5519 N/A N/A N/A 2A N/A N/A 1A1757 4C5180 2A D C C 4C5844 Drawing Image Number CYL 3X10X1 1/4 (WLD) W/BSHGS CROSS NUT, PISTON CROSS PISTON CROSS CROWN SEAL CROSS TUBE ASSY CROSS ROD ASSY CROSS HEAD CROSS, O-RING CROSS, BACK-UP CROSS U-CUP CROSS RETAINING RING CROSS O-RING WIPER SEAL CROSS CROSS RETAINING RING CROSS SPACER CROSS LUBE FITTING CROSS CLEVIS PIN PIN COTTER 3/16 X 2 BHG 50ODX25X38 CROSS SEAL KIT ( C) In Seal Kit #19 In Seal Kit #19 In Seal Kit #19 In Seal Kit #19 In Seal Kit #19 In Seal Kit #19 07/11/18 SGC1560, SGC1572 & SGC1584 Grapples P 11

12 Hydraulic Cylinder ( C) Monarch Section 2: Main Assembly SGC1560, SGC1572 & SGC1584 Grapples P 07/11/18

13 Hydraulic Cylinder ( C) Monarch Section 2: Main Assembly Ref. Part No. Part Description Comments Revision Dwg C C C C C Image No. CYL 3X10X1 1/4 (WLD) W/BSHGS * MON PISTON NUT MON RETAINING RING EXT 00 MON WEAR RING MON WEAR RING MON SEAL ZURCON U-CUP RU9 25 MON SEAL ZRCON GLYD RNG P 00 MON SEAL WIPER 25 SNAP IN DA MON SEAL DUAL 00 Z20 PU MON PIN 25 X 87 MON PISTON 00-0-TSS-ISO-WR MON CYL HEAD RR-TSS MON TUBE WMT RR-W MON ROD WMT W MON RETAINING RING INT 00 GREASE ZERK STRAIGHT 1/4-28 PIN COTTER 3/16 X 2 BHG 50ODX25X38 MON SEAL KIT /11/18 SGC1560, SGC1572 & SGC1584 Grapples P 13

14 Decal Placement Table of Contents Section 3: Decals SGC1560, SGC1572 & SGC1584 Grapples P 07/11/18

15 Decal Placement Section 3: Decals Ref. Part No. Part Description Comments Revision dwg C C C C C C C C Drawing Image Number DECAL WARNING PINCH PT/CRUSH DECAL FLAG DECAL WARNING HYD PRESS LONG DECAL WARNING READ MANUAL DECAL LANDPRIDE 10" BROWN/GOLD DECAL, SGC1560 GOLD DECAL, SGC1572 GOLD DECAL, SGC1584 GOLD 07/11/18 SGC1560, SGC1572 & SGC1584 Grapples P 15

16 Touch-up Paints Section 3: Decals No diagram associated with this Parts List 16 SGC1560, SGC1572 & SGC1584 Grapples P 07/11/18

17 Touch-up Paints Section 3: Decals Ref. Part No. Part Description Comments Revision C C C C C C C CTU CTU CTU CTU CTU CTU CTU CQT CQT CQT CQT CQT CQT CQT CGL CGL CGL CGL CGL CGL CGL LP BEIGE SPRAY CAN GLOSS BLACK SPRAY CAN MED. RED SPRAY TRCK/CTR GREEN SPRAY CUTTERS ORANGE SPRAY CAN BLUE SPRAY CAN PAINT ALUMINUM/ZINC SPRAY CAN LP BEIGE TOUCH-UP 5OZ GLOSS BLACK TOUCH-UP 5OZ MED RED TOUCH-UP 5OZ GREEN TOUCH-UP 5OZ ORANGE TOUCH-UP 5OZ BLUE TOUCH-UP 5OZ PAINT ALUMINUM/ZINC TOUCH UP LP BEIGE QUART GLOSS BLACK QUART MED RED QUART GREEN QUART ORANGE QUART BLUE QUART PAINT ALUMINUM/ZINC QUART LP BEIGE GALLON GLOSS BLACK GALLON MED RED GALLON GREEN GALLON ORANGE GALLON BLUE GALLON PAINT ALUMINUM/ZINC GALLON Spray can Spray can Spray can Spray can Spray can Spray can Spray can Touch-up bottle with brush Touch-up bottle with brush Touch-up bottle with brush Touch-up bottle with brush Touch-up bottle with brush Touch-up bottle with brush Touch-up bottle with brush Quart can Quart can Quart can Quart can Quart can Quart can Quart can Gallon can Gallon can Gallon can Gallon can Gallon can Gallon can Gallon can 07/11/18 SGC1560, SGC1572 & SGC1584 Grapples P 17

18 SGC Hose Bundle Kubota SVL Section 4: Options & Accessories SGC1560, SGC1572 & SGC1584 Grapples P 07/11/18

19 SGC Hose Bundle Kubota SVL Section 4: Options & Accessories Ref. Part No. Part Description Comments Revision Dwg A C C C C C C C Drawing Image Number HOSE BUNDLE, KUBOTA SVL EL 3/4MJIC 1 1/16MORB AD 3/4MJIC 1 1/16MORB CUP 1 1/16FORB MALE QUICK CPLR RPBY C CUP 1 1/16FORB FML QUICK CPLR RPBY C HH1/2R /4FJIC90 TC Obsolete Obsolete 07/11/18 SGC1560, SGC1572 & SGC1584 Grapples P 19

20 Third Function Hose Kit A Section 4: Options & Accessories SGC1560, SGC1572 & SGC1584 Grapples P 07/11/18

21 Third Function Hose Kit A Section 4: Options & Accessories Ref. Part No. Part Description Comments Revision dwg A C C C Drawing Image Number HOSE KIT, THIRD FUNCTION EL 3/4FJIC 3/4MJIC CP 3/4FORB QD FEMALE (POPPET) HH3/8R /4FJIC 3/4MORB 07/11/18 SGC1560, SGC1572 & SGC1584 Grapples P 21

22 Table of Contents Section 4: Options & Accessories Third Function Valve Kit A for Kubota MX4700, MX4800, MX5100, MX5200, MX58OO, & MX SGC1560, SGC1572 & SGC1584 Grapples P 07/11/18

23 Section 4: Options & Accessories Table of Contents Third Function Valve Kit A for Kubota MX4700, MX4800, MX5100, MX5200, MX58OO, & MX6899 Ref. Part No. Part Description Comments Revision Dwg A S D D C C C C C C C C C C C C C C C C C C C Image No. VALVE KIT MX5200 3RD FNCTION * ASY, PUSH BUTTON CNTRL HNDL BRKT, VALVE MOUNT PLATE, BLKHD MOUNT CABLE TIE.19X D 50LB HHCS M8X25X20 GR8.8 HSHCS 1/4-20X7/8 HHCS M8X25X35 GR8.8 WASHER SPRING LOCK M8 PLT WASHER FLAT M8 PLT VALVE, THIRD FUNCTION AD 9/16MORB 9/16MJIC CP 3/4FORB MALE QD POPPET TYPE CP 3/4FORB QD FEMALE (POPPET) FUSE, 10 AMP MINI BLADE BLADE FUSE HOLDER, MINI HH3/8R /4FJIC 9/16FJIC AD 9/16MORB 3/4MORB AD 3/4MJIC 3/4MORB BLKHD W/ LN HH3/8R /4FJIC 3/4MORB HH3/8R /4FJIC90 9/16FJIC DUST CAP, 1/2" QD AG DUST PLUG, 1/2" QD AG 07/11/18 SGC1560, SGC1572 & SGC1584 Grapples P 23

24 The is a numeric index of all part numbers included in this manual. The index shows what page(s) the part is used on. Part Number Page Part Number Page A D A A A H H A H H H H H H A S A D D C C C C C C C C C...7, C C C C...7, C C C C...11, C C...9, 11, C C C C C C C C C C C...21, C C C CGL CQT CTU C CGL CQT CTU C CGL CQT CTU C CGL CQT CTU C CGL CQT CTU C CGL CQT CTU C CGL CQT CTU C C C C C C C C C C C C C C C C C C C C C C C C C C C C...7, 11, 13 Dwg Dwg Dwg Dwg Dwg dwg dwg dwg N/A SGC1560, SGC1572 & SGC1584 Grapples P 07/11/18

25 This Page Intentionally Left Blank 07/11/18 SGC1560, SGC1572 & SGC1584 Grapples P 25

26 Great Plains Manufacturing, Inc. Corporate Office: P.O. Box 5060 Salina, Kansas USA