Parts Manual. Rotary Cutters RC3614 (540 RPM) & RCM3614 (1000 RPM) Copyright 2017 Printed 12/20/ P

Transcription

1 Table of Contents Part Number Index Parts Manual RC3614 (540 RPM) & RCM3614 (1000 RPM) Rotary Cutters Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! Cover illustration may show optional equipment not supplied with standard unit. Copyright 2017 Printed 12/20/ P

2 Table of Contents Table of Contents Part Number Index Section 1: Introduction...4 Using This Manual...4 Manual Replacement Information...4 Manual Revisions...4 Touch-up Paint...4 Hardware Legend...5 Replacement Hardware...5 Serial Numbers...5 Part Number Service Coding...5 Section 2: Decks & Hitches...6 Blade Carrier CW CTR & RH Deck...6 Deck Center Section...8 Deck Wing Section...12 Hitch Ball Coupler...14 Hitch Bar Tite...16 Hitch Frame & Level Rod...18 Hitch Performance...20 Hitch Pintle...22 Hitch Standard Pivoting Clevis...24 Hitch Swivel...26 Off Center Lights 3.5 Inch (LED)...28 Weight Box...30 Section 3: Axles...32 Axle Center...32 Axle Wing...34 Section 4: Guards...36 Guards Chain Double Row Front...36 Guards Chain Double Row Rear...38 Guards Chain Single Row Front...40 Guards Chain Single Row Rear...42 Section 5: Drivelines (540 RPM)...44 Driveline ( C)...44 Driveline ( C)...46 Driveline Center ( C) Comer...48 Section 5: Drivelines (1000 RPM)...50 Driveline Conv RPM ( C) Walterscheid...50 Driveline CV RPM ( C) Weasler...52 Driveline CV RPM W/ Overrunning Clutch ( C)...54 Section 5: Drivelines (540 RPM)...56 Driveline Slip Clutch ( ) Comer...56 Driveline Slip Clutch ( ) Comer...58 Driveline Slip Clutch (396674) Walterscheid...60 Driveline Wing ( C) Comer...62 Driveline ( C)...64 Driveline ( C)...66 Driveline Center ( C) Comer...68 Driveline Conv. 540 RPM ( C) Walterscheid...70 Driveline CV 540 RPM ( C) Weasler...72 Driveline Slip Clutch ( ) Comer...74 Driveline Slip Clutch ( ) Comer...76 Driveline Slip Clutch (396674) Walterscheid...78 Driveline Wing ( C) Comer...80 Section 6: Gearboxes (1000 RPM)...82 Divider Box 1000 RPM 1.35:1 ( C)...82 Section 6: Gearboxes (540 RPM)...84 Gearbox ( C)...84 Section 6: Gearboxes (1000 RPM)...86 Gearbox ( C)...86 Section 6: Gearboxes (540 RPM)...88 Divider Box 540 RPM 1:1.35 ( C)...88 Gearbox ( C)...90 Gearbox ( C)...92 Section 7: Hydraulics...94 Hydraulic Cylinder ( C) Red Lion...94 Hydraulic Cylinder Plumbing Components...96 Hydraulic Cylinder Rephase ( C) 3 X Hydraulic Cylinder Rephase ( C) Red Lion 3.25 X Hydraulic Cylinder Wing Deck ( C) Cross Hydraulic Cylinder Wing Deck ( C) Midway Hydraulic Cylinders W/ Mounting Components Section 8: Decals Decals Section 9: Options Off Center Lights 3.5 Inch (LED) Retro-Fit ( A) Tire Options Part Number Index Copyright 2017 All rights reserved Printed 12/20/17 Great Plains Manufacturing, Inc. provides this publication as is without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. Great Plains Manufacturing, Incorporated Trademarks The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains All other brands and product names are trademarks or registered trademarks of their respective holders. Printed in the United States of America P /20/17

3 Table of Contents Part Number Index Alphabetized Table of Contents Selected Models A Axle Center...32 Axle Wing...34 B Blade Carrier CW CTR & RH Deck...6 Off Center Lights 3.5 Inch (LED) Retro-Fit ( A) T Tire Options W Weight Box...30 D Decals Deck Center Section...8 Deck Wing Section...12 Divider Box 1000 RPM 1.35:1 ( C)...82 Divider Box 540 RPM 1:1.35 ( C)...88 Driveline ( C)...44 Driveline ( C)...46 Driveline Center ( C) Comer...48 Driveline Conv RPM ( C) Walterscheid...50 Driveline Conv. 540 RPM ( C) Walterscheid...70 Driveline CV RPM ( C) Weasler...52 Driveline CV RPM W/ Overrunning Clutch ( C)...54 Driveline CV 540 RPM ( C) Weasler...72 Driveline Slip Clutch ( ) Comer...56 Driveline Slip Clutch ( ) Comer...58 Driveline Slip Clutch (396674) Walterscheid...60 Driveline Wing ( C) Comer...62 G Gearbox ( C)...90 Gearbox ( C)...84 Gearbox ( C)...86 Guards Chain Double Row Front...36 Guards Chain Double Row Rear...38 Guards Chain Single Row Front...40 Guards Chain Single Row Rear...42 H Hitch Ball Coupler...14 Hitch Bar Tite...16 Hitch Frame & Level Rod...18 Hitch Performance...20 Hitch Pintle...22 Hitch Standard Pivoting Clevis...24 Hitch Swivel...26 Hydraulic Cylinder ( C) Red Lion...94 Hydraulic Cylinder Plumbing Components...96 Hydraulic Cylinder Rephase ( C) 3 X Hydraulic Cylinder Rephase ( C) Red Lion 3.25 X Hydraulic Cylinder Wing Deck ( C) Cross Hydraulic Cylinder Wing Deck ( C) Midway Hydraulic Cylinders W/ Mounting Components O Off Center Lights 3.5 Inch (LED) /20/ P

4 Table of Contents Part Number Index P /20/17

5 Table of Contents Part Number Index 12/20/ P

6 Table of Contents Blade Carrier CW CTR & RH Deck Part Number Index P /20/17

7 Table of Contents Part Number Index Section 2: Decks & Hitches Blade Carrier CW CTR & RH Deck Ref. Part No. Part Description Comments Revision Dwg N/A N/A N/A N/A H N/A C C C C A Drawing Image Number BLADE SPACER 18 GA..052 Thick BLADE SPACER 16 GA..064 Thick BLADE SPACER 20 GA..04 Thick BLADE SPACER 24 GA..03 Thick BLADE CARRIER WLDMNT BLADE CARRIER CW ASSY BLD BLT 1 1/8-12X3.44 W/.25KEY NUT HEX TOP LOCK 1 1/8-12 PLT. WASHER FLAT 1 HARD ASTMF436 PN CUTTER BLADE 1/2X4X29 CW BLADE BOLT KIT Center & RH Deck 12/20/ P

8 Table of Contents Deck Center Section Part Number Index P /20/17

9 Table of Contents Part Number Index Section 2: Decks & Hitches Deck Center Section Ref. Part No. Part Description Comments Revision Dwg H D D D H H H H H H C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C Drawing Image Number WLDMT. SHAFT PROTECTOR PLATE, DIV. BOX SUPPORT SHIELD, FRONT HALF BRKT, SHIELD MOUNT DECK CENTER W/O DR GREEN DECK CENTER W/ DR GREEN SEE BLADE CARRIER FOR COMPONENTS SPRING TRUNNION SKID SHOE SHIELD, REAR HALF SHIELD, LOCK BRKT HHCS 1/4-20X1 GR5 HHCS 5/16-18X3/4 GR5 HHCS 5/8-11X2 1/2 GR5 HHCS 3/4-10X2 1/4 GR5 HHCS 1/2-13X1 1/2 GR5 HHCS 1-8X9 1/2 GR5 HHCS M8X1.25X20 GR8.8 HHCS 1/2-13X7 1/2 GR5 HFS 1/2-13X2 GR8 HHCS 3/8-16X8 GR5 ZNYCR NUT HEX WHIZ 1/2-13 PLT NUT HEX NYLOCK 1/2-13 NUT HEX TOP LOCK 1-8 PLT NUT HEX FLG TP LK 5/16-18ZNYCR NUT FLANGE LOCK 3/8-16 PLT NUT HEX NYLOCK 1/4-20 NUT HEX FLANGE LOCK 5/8-11 PLT NUT HEX FLG TOP LK 3/4-10 PLT WASHER FLAT 1/4 SAE PLT WASHER LOCK SPRING 5/16 PLT WASHER FLAT 5/16 USS PLT WASHER FLAT 1/2 USS PLT WASHER FLAT 1 SAE WASHER FLAT 5/16 SAE PLT PIN COTTER 3/16 X 1 1/2 PLT PIN CLEVIS 1 X 4 11/16 USABLE SPRING HOSE LOOP SPRING HOSE LOOP HEAVY SPRING COMP 3.20OD.63W 5.5L MANUAL STORAGE CONTAINER KNOB 3/8-16 FEMALE THD 2 3/8OD DRVLN, INT CAT 4 W/CLUTCH PTO E60 X NM CLUTCH COMER VENT # PTO 2500 X NO CLUTCH PTO CV 540 NO CLUTCH PTO 2500 CAT /8-21 PTO CV /8 NO CLUTCH PTO CV /8 OR CLUTCH VENT/DIPSTICK DIV BOX 540RPM 1:1.35 DIV BOX 1000RPM 1.35:1 GBOX LF227 1:1.35 REV GBOX LF :1 REV LAND PRIDE CONE Without Deck Rings With Deck Rings Cat RPM Std 540 RPM CV 1000 RPM Std 1000 RPM CV 1000 RPM CV RC3614 RCM3614 RC3614 RCM /20/ P

10 Table of Contents Deck Center Section (continued) Part Number Index Ref Part No C C Part Description SMALL SHAFT CONE W/ACCESS DOOR PLUG LP 3" ID RUBBER Comments This cone has been replaced with C Revision P /20/17

11 Table of Contents Part Number Index Section 2: Decks & Hitches Deck Center Section (continued) This Page Intentionally Left Blank 12/20/ P

12 Table of Contents Deck Wing Section Part Number Index P /20/17

13 Table of Contents Part Number Index Section 2: Decks & Hitches Deck Wing Section Ref. Part No. Part Description Comments Revision Dwg D D H H L H D H C C C C C C C C C C C C C C C C Drawing Image Number DEFLECTOR INNER RH DEFLECTOR OUTER RH DECK WING RH W/O DR GREEN DECK WING RH W/ DR GREEN SEE BLADE CARRIER FOR COMPONENTS ASSY HINGE ROD HINGE ROD WING SKID SHOE HARDENED WING SKID SHOE HHCS 5/16-18X3/4 GR5 HHCS 3/8-16X1 1/2 GR5 HHCS 3/4-10X2 1/4 GR5 RHSNB 3/8-16X1 1/4 GR5 PLOW 3/8-16X1 1/4 GR5 NUT HEX TOP LOCK 3/8-16 PLT NUT HEX WHIZ 3/8-16 PLT NUT HEX FLG TOP LK 3/4-10 PLT WASHER LOCK SPRING 5/16 PLT WASHER FLAT 5/16 USS PLT PTO V80 X NM CLUTCH DRVLN, WING CAT 4 W/CLUTCH VENT/DIPSTICK GBOX LF227 1:1 STD LAND PRIDE CONE PLUG LP 3" ID RUBBER Without Deck Rings With Deck Rings Cat 4 RH Deck 12/20/ P

14 Hitch Ball Coupler Table of Contents Part Number Index P /20/17

15 Table of Contents Part Number Index Section 2: Decks & Hitches Hitch Ball Coupler Ref. Part No. Part Description Comments Revision Dwg A H C C Drawing Image Number 2 5/16" BALL HITCH ASSEMBLY * 2 5/16" BALL HITCH WELDMENT HHCS 5/8-11X1 3/4 GR5 NUT HEX WHIZ 5/8-11 PLT Complete assembly 12/20/ P

16 Hitch Bar Tite Table of Contents Part Number Index P /20/17

17 Hitch Bar Tite Table of Contents Part Number Index Section 2: Decks & Hitches Ref. Part No. Part Description Comments Revision Dwg A H H H D D H C C C C C C C C C C C C C C C K Drawing Image Number BAR TITE HITCH * SHAFT WELDMENT WELDMENT HITCH CLEVIS SWIVEL RECEIVER HITCH WEAR PLATE WIDE FORMED HITCH SUPPORT WIDE BAR TITE WIDE TOP GREASE ZERK STRAIGHT 1/4-28 HHCS 5/8-11X1 3/4 GR5 HHCS 3/4-10X6 GR5 HHCS 1-8X6 1/2 GR5 HHCS 1-8X5 1/2 GR5 NUT HEX TOP LOCK 1-8 PLT NUT HEX FLANGE LOCK 3/4-10 PLT NUT HEX FLG LOCK 1-8 GR B PLT NUT HEX SLOTTED 1 1/2-6 PLT NUT HEX WHIZ 5/8-11 PLT WASHER FLAT 3/4 SAE PLT WASHER FLAT 1 USS PLT WASHER FLAT 1.50 HARD ASTMF436 PIN COTTER 1/4 X 2 1/2 PLT BUSHING 1.50ODX1.00IDX1.25 BAR TITE HITCH WIDE Complete assembly 12/20/ P

18 Table of Contents Hitch Frame & Level Rod Part Number Index P /20/17

19 Table of Contents Part Number Index Section 2: Decks & Hitches Hitch Frame & Level Rod Ref. Part No. Part Description Comments Revision Dwg H H K H C C C C C C C C C C C C C C Drawing Image Number WLDMT. LEVEL ROD SHORT HITCH LEVEL ROD ASSY LEVEL ROD LONG GREASE ZERK 1/4-28 THD FORMING HHCS 1-8X2 1/2 GR5 HHCS 3/8-16X2 GR5 NUT LOCK 3/8-16 PLT NUT HEX JAM 7/8-9 NUT HEX TOP LOCK 1-8 PLT NUT HEX COUPLER 7/8-9 x 5 WASHER FLAT 3/4 SAE PLT WASHER FLAT 1 USS PLT PIN CLEVIS 3/4 X 1 1/2 PIN COTTER 1/8 X 1 1/4 PLT PIN 1 X 5 1/2 HRD PLT SAFETY CHAIN LB SIDEWIND JACK 7000 LB 12/20/ P

20 Table of Contents Hitch Performance Part Number Index P /20/17

21 Table of Contents Part Number Index Section 2: Decks & Hitches Hitch Performance Ref. Part No. Part Description Comments Revision Dwg A H D H H C C C C C C C C C C C C C Image No. LP PERFORMANCE HITCH * SWIVEL RECEIVER HITCH HOLDER HITCH CLEVIS HITCH YOKE GREASE ZERK STRAIGHT 1/4-28 HHCS 5/8-11X1 3/4 GR5 HHCS 1-8X7 GR5 HHCS 3/8-16X1 1/4 GR5 NUT HEX COUPLER 3/8-16X1 3/4 NUT HEX FLG LOCK 1-8 GR B PLT NUT HEX SLOTTED 1 1/2-6 PLT NUT HEX WHIZ 5/8-11 PLT WASHER LOCK SPRING 3/8 PLT WASHER FLAT 1.50 HARD ASTMF436 PIN COTTER 1/4 X 2 1/2 PLT BUSHING 1 1/4X1X1/2 HRD BUSHING 1 1/4X1X5/8 Complete assembly 12/20/ P

22 Hitch Pintle Table of Contents Part Number Index P /20/17

23 Hitch Pintle Table of Contents Part Number Index Section 2: Decks & Hitches Ref. Part No. Part Description Comments Revision Dwg A H L H H C C C C C C C C C C Drawing Image Number PINTLE HITCH * WLDMT. CLEVIS LEVEL ROD ASSY. LEVEL ROD CLEVIS WLDMT. PINTLE HITCH CLEVIS YOKE HITCH HHCS 5/8-11X1 3/4 GR5 HHCS 1-8X9 GR8 SPTHD HFS 5/8-11X2 1/2 GR8 PLT NUT HEX WHIZ 5/8-11 PLT NUT HEX FLG LOCK 1-8 GR B PLT NUT HEX WHIZ 5/8-11 PLT WASHER FLAT 3/4 SAE PLT PIN COTTER 5/32 X 1 1/4 LG PIN CLEVIS 3/4 X 1 1/2 PINTLE HOOK SQ.BASE BDB Complete assembly 12/20/ P

24 Table of Contents Hitch Standard Pivoting Clevis Part Number Index P /20/17

25 Table of Contents Part Number Index Section 2: Decks & Hitches Hitch Standard Pivoting Clevis Ref. Part No. Part Description Comments Revision Dwg A H H L H C C C C C C C Drawing Image Number STANDARD HITCH * WLDMT. TONGUE CLEVIS WLDMT. CLEVIS LEVEL ROD ASSY. LEVEL ROD CLEVIS YOKE HITCH HHCS 5/8-11X1 3/4 GR5 HHCS 1-8X9 GR8 SPTHD NUT HEX WHIZ 5/8-11 PLT NUT HEX FLG LOCK 1-8 GR B PLT WASHER FLAT 3/4 SAE PLT PIN COTTER 5/32 X 1 1/4 LG PIN CLEVIS 3/4 X 1 1/2 Complete assembly 12/20/ P

26 Hitch Swivel Table of Contents Part Number Index P /20/17

27 Hitch Swivel Table of Contents Part Number Index Section 2: Decks & Hitches Ref. Part No. Part Description Comments Revision Dwg A H H H H C C C C C C C C C C C C C C S Drawing Image Number SWIVEL HITCH * CLEVIS WELDMENT SHAFT WELDMENT SWIVEL RECEIVER CLEVIS SWIVEL GREASE ZERK 1/4-28 THD FORMING HHCS 5/8-11X1 3/4 GR5 HHCS 1-8X6 1/2 GR5 HHCS 1-8X5 1/2 GR5 NUT HEX JAM 1-8 PLT NUT HEX FLG LOCK 1-8 GR B PLT NUT HEX SLOTTED 1 1/2-6 PLT NUT HEX WHIZ 5/8-11 PLT NUT HEX 1-8 PLT WASHER FLAT 1 USS PLT WASHER FLAT 1 3/8HARD ASTMF436 PIN COTTER 1/4 X 2 1/2 PLT BUSHING CYL 1 1/4 X 1 X 1 BUSHING 1 1/4X1X5/8 ASSY SWIVEL CLEVIS Complete assembly Replaced By S 12/20/ P

28 Table of Contents Off Center Lights 3.5 Inch (LED) Part Number Index P /20/17

29 Table of Contents Part Number Index Section 2: Decks & Hitches Off Center Lights 3.5 Inch (LED) Ref. Part No. Part Description Comments Revision Dwg L A D D D C C C C C C C C C C J-37-R J-37-A J-AC1-15-B C J-37-R J-37-A J-AC1-15-B C C C C C Image No. OFFSET CUTTER LIGHT KIT 3.5 LL OFFSET CUTTER LIGHT KIT 3.5 LL * LIGHT MNT LIGHT GUARD LIGHT MNT CLAMP CABLE TIE.19X DIA 50LB RHSNB 3/8-16X1 GR5 HHCS 3/8-16X5 GR5 HHCS 3/8-16X4 1/2 GR5 HHCS 1/4-20X1 1/4 GR5 NUT LOCK 3/8-16 NYLON INSERT NUT FLANGE LOCK 3/8-16 PLT NUT HEX NYLOCK 1/4-20 WASHER FLAT 1/4 SAE PLT DUAL LED LIGHT LH RED LED LENS MODULE AMBER LED LENS MODULE BLACK LENS COVER DUAL LED LIGHT RH RED LED LENS MODULE AMBER LED LENS MODULE BLACK LENS COVER RH LIGHT WIRE HARNESS 8' LH LIGHT WIRE HARNESS 8' ENHANCE MODULE LEAD WIRE HARNESS 13' LIGHT MAGNETS WITH HARDWARE S/N D001092N+ Lights are now standard (Complete Assembly) S/N D001091N- Lights were optional S/N + S/N - Complete light assembly Red lens Amber lens Black lens Complete light assembly Red lens Amber lens Black lens 12/20/ P

30 Weight Box Table of Contents Part Number Index P /20/17

31 Weight Box Table of Contents Part Number Index Section 2: Decks & Hitches Ref. Part No. Part Description Comments Revision Dwg D D D D D L H H K K C C C C C C C C Drawing Image Number ROUND ROD.25 X 14 ROUND ROD.25 X CHNGRD FRT WEIGHTBOX CHNGRD REAR WEIGHTBOX SKID SHOE WTBX ASSY HINGE ROD HINGE ROD WEIGHT BOX GREEN ASSY CHNGRD FRT WGHTBX ASSY CHNGRD REAR WGHTBX RHSNB 3/8-16X1 GR5 HHCS 3/8-16X1 1/2 GR5 HHCS 1-8X3 GR5 PLOW 3/8-16X1 1/4 GR5 NUT HEX TOP LOCK 3/8-16 PLT NUT HEX WHIZ 3/8-16 PLT NUT HEX SIDE LOCK 1-8 PLT CHAIN WELD 5/16 PROOF X 4 LINK 12/20/ P

32 Axle Center Table of Contents Part Number Index P /20/17

33 Axle Center Table of Contents Part Number Index Section 3: Axles Ref. Part No. Part Description Comments Revision Dwg D H K H S C C C C C C C C C C C C C C C C C C C HT250 Drawing Image Number HUB GREASE CAP AXLE CENTER HUB 5 BOLT COMPLETE PIVOT PIN TRAILING ARM ASY PIVOT PIN TRAILING ARM GREASE ZERK 1/4-28 X 90-DEG GREASE ZERK 1/4-28 THD FORMING HHCS 1/2-13X3 1/4 GR5 HUB STUD 1/2-20X1.88 GR5 NUT LOCK 1/2-13 PLT NUT HEX SLOTTED 7/8-14 PLT NUT HEX 1/2-20 X 5/8 HIGH NUT HEX JAM SLOTTED 1 1/4-7 WASHER SPINDLE - 7/8 PIN COTTER 3/16 X 2 PIN COTTER 5/32 X 1 3/4 LG HUB 5-BOLT W/CUPS/STUDS DUAL AXLE SPINDLE SEAL 1.75ID CR17617 BRG CUP LM BRG CONE 1.25ID LM BRG CUP LM BRG CONE LM BHG 1.50ODX1.25X1.38 MACHINED 5-BOLT HUB 12/20/ P

34 Axle Wing Table of Contents Part Number Index P /20/17

35 Axle Wing Table of Contents Part Number Index Section 3: Axles Ref. Part No. Part Description Comments Revision Dwg D S H H K H H S H S H H C C C C C C C C C C C C C C C C C C N/A C C C C C C C C C C HT250 Drawing Image Number HUB GREASE CAP ASY PIVOT PIN TANDEM ARM PIVOT PIN TANDEM ARM WING AXLE HUB 5 BOLT COMPLETE TRAILING ARM WING PIVOT PIN TRAILING ARM ASY PIVOT PIN TRAILING ARM WALKING TANDEM PIVOT PIN WALKING TANDEM PIV PIN ASY WING AXLE TRAILING ARM WING GREASE ZERK STRAIGHT 1/4-28 GREASE ZERK 1/4-28 X 90-DEG GREASE ZERK 1/4-28 THD FORMING SCREW SLOTTED HEX 1/4-28X3/16 HHCS 1/2-13X1 3/4 GR5 HHCS 1/2-13X3 1/4 GR5 HHCS 1/2-13X10 GR5 HUB STUD 1/2-20X1.88 GR5 NUT LOCK 1/2-13 PLT NUT HEX SLOTTED 7/8-14 PLT NUT HEX FLG LOCK 1/2-13 PLT NUT HEX 1/2-20 X 5/8 HIGH NUT HEX JAM SLOTTED 1 1/4-7 WASHER FLAT 1/2 SAE PLT WASHER SPINDLE - 7/8 PIN COTTER 3/16 X 2 PIN COTTER 5/32 X 1 3/4 LG SPRING COMP 2.62OD.531W 8.5L SPRING COMP 2.5OD.5W 8.5L HUB 5-BOLT W/CUPS/STUDS DUAL AXLE SPINDLE SINGLE AXLE SPINDLE SEAL 1.75ID CR17617 BRG CUP LM BRG CONE 1.25ID LM BRG CUP LM BRG CONE LM BUSHING CYL 1 1/4 X 1 X 1 BHG 1.50ODX1.25X1.38 MACHINED 5-BOLT HUB S/N D001067N- S/N D001067N- S/N - S/N - S/N D001068N+ S/N D001068N+ S/N + S/N + S/N D001068N+ S/N D001068N+ S/N - S/N D001073N+ S/N D001072N- RPBY C 12/20/ P

36 Table of Contents Guards Chain Double Row Front Part Number Index P /20/17

37 Table of Contents Part Number Index Section 4: Guards Guards Chain Double Row Front Ref. Part No. Part Description Comments Revision Dwg A D D D D D D K K K C C C C Drawing Image Number CHNGRD FRONT DOUBLE * CHAIN HANGER ROD /2 LG ROUND ROD 1/4 X 31 1/2 ROUND ROD.25 X 94 CHNGRD, FRT DBL CNTR CHNGRD, FRT DBL WING CHNGRD FRT DBL CTR OU ASSY CHNGRD WG FRT DBL ASSY CHNGRD CTR FRT DBL ASSY CHNGRD OTR FRT DBL RHSNB 3/8-16X1 GR5 NUT HEX WHIZ 3/8-16 PLT CHAIN 5/16 PROOF X 6 LINKS PLT CHAIN WELD 5/16 PROOF X 5 LINK Complete assembly 12/20/ P

38 Table of Contents Guards Chain Double Row Rear Part Number Index P /20/17

39 Table of Contents Part Number Index Section 4: Guards Guards Chain Double Row Rear Ref. Part No. Part Description Comments Revision Dwg A D D D D D K K C C C Drawing Image Number CHNGRD REAR DOUBLE * ROD 1/4 X 44 PLTD. RPBY D ROUND ROD.25 X 59 CHNGRD, REAR DBL CTR CHNGRD, WING DBL REAR ASSY CHNGRD CTR REAR DBL ASSY CHNGRD WG REAR DBL RHSNB 3/8-16X1 GR5 NUT HEX WHIZ 3/8-16 PLT CHAIN WELD 5/16 PROOF X 4 LIN Complete assembly 12/20/ P

40 Table of Contents Guards Chain Single Row Front Part Number Index P /20/17

41 Table of Contents Part Number Index Section 4: Guards Guards Chain Single Row Front Ref. Part No. Part Description Comments Revision Dwg A D D D D D D K K K C C C C Drawing Image Number CHNGRD FRONT SINGLE * CHAIN HANGER ROD /2 LG ROUND ROD 1/4 X 31 1/2 ROUND ROD.25 X 94 CHNGRD, FRT SGL WING CHNGRD, FRT SGL CNTR CHNGRD FRT SGL CTR OU ASSY CHNGRD WG FRT SGL ASSY CHNGRD CTR FRT SGL ASSY CHNGRD OTR FRT SGL RHSNB 3/8-16X1 GR5 NUT HEX WHIZ 3/8-16 PLT CHAIN 5/16 PROOF X 6 LINKS PLT CHAIN WELD 5/16 PROOF X 5 LINK Complete assembly 12/20/ P

42 Table of Contents Guards Chain Single Row Rear Part Number Index P /20/17

43 Table of Contents Part Number Index Section 4: Guards Guards Chain Single Row Rear Ref. Part No. Part Description Comments Revision Dwg A D D D D K K C C C Drawing Image Number CHNGRD REAR SINGLE * ROD 1/4 X 44 PLTD. ROUND ROD.25 X 59 CHNGRD, WING SGL REAR CHNGRD, REAR SGL CTR ASSY CHNGRD WG REAR SGL ASSY CHNGRD CTR REAR SGL RHSNB 3/8-16X1 GR5 NUT HEX WHIZ 3/8-16 PLT CHAIN WELD 5/16 PROOF X 4 LINK Complete assembly 12/20/ P

44 Table of Contents Driveline ( C) Part Number Index P /20/17

45 Table of Contents Driveline ( C) Part Number Index Section 5: Drivelines (540 RPM) Ref. Part No. Part Description Comments Revision Dwg C C Drawing Image Number DRVLN, INT CAT 4 W/CLUTCH * WS YOKE 1 3/4"-20 SPL WS CROSS BRG KIT WS INBOARD YOKE WS OUTER PROFILE 2A WS SPRING PIN 10 X 20 WS FRICTION CLUTCH EC ZERK DECAL DANGER GUARD MISS PTO Complete assembly 12/20/ P

46 Table of Contents Driveline ( C) Part Number Index P /20/17

47 Table of Contents Driveline ( C) Part Number Index Section 5: Drivelines (540 RPM) Ref. Part No. Part Description Comments Revision Dwg C C C Drawing Image Number DRVLN, WING CAT 4 W/CLUTCH * WS YOKE 1 3/4-20 SPL.I.C WS CROSS BRG KIT WS SHAFT YOKE WS SPRING PIN 10 X 20 WS INNER PROFILE S4LGA WS PROFILE&SLEEVE WA-S5GL WS SHAFT YOKE WS FRICTION CLUTCH WS SHIELD CONE 6 RIB WS BRG RING - SC25 WS GUARD TUBE OUTER WS GUARD TUBE INNER WS SCREW DECAL DANGER PTO DRIVELINE DECAL DANGER GUARD MISS PTO DRIVELINE SHIELD SAFETY CHAIN WS SUPPORT BRG WS ZERK WS REINFORCING COLLAR Complete assembly 12/20/ P

48 Table of Contents Driveline Center ( C) Comer Part Number Index P /20/17

49 Table of Contents Driveline Center ( C) Comer Part Number Index Section 5: Drivelines (540 RPM) Ref. Part No. Part Description Comments Revision Dwg C Image No. PTO E60 X NM CLUTCH * COMER YOKE COMPLETE CO CROSS JOURNAL SET CO CIRCLIP CO GREASE NIPPLE COMER YOKE, OUTER COMER SHAFT, SPLINED COMER ROLL PIN, INNER TUBE CO INNER YOKE COMER CLUTCH, COMPLETE ASSY COMER TAPERED PIN SET 1 3/4 COMER SPRING COMER YOKE, FLANGED COMER BUSH COMER LINING RING COMER CLUTCH SUPPORT COMER INNER PLATE COMER INTERMEDIATE PLATE COMER PRESSURE PLATE COMER BOLT WITH NUT M10X100 Complete assembly 12/20/ P

50 Table of Contents Part Number Index Driveline Conv RPM ( C) Walterscheid (Applies to RCM3614 only) P /20/17

51 Table of Contents Part Number Index Section 5: Drivelines (1000 RPM) Driveline Conv RPM ( C) Walterscheid (Applies to RCM3614 only) Ref. Part No. Part Description Comments Revision Dwg C C N/A C C Drawing Image Number PTO 2500 CAT /8-21 * WS YOKE 1 3/4-20 SPL.I.C WS YOKE 1 3/8-21 SPL. AS WS CROSS & BEARING KIT 2500 WS INBOARD YOKE 2500 WS SPRING PIN 10 X 90 WS INNER PROFILE S4 WS PROFILE & SLEEVE W.A. WS INBOARD YOKE 2400 DECAL DANGER GUARD MISS PTO WALTERSCHEID SCREW WS BEARING RING - SC25 WS OUTER SHIELD TUBE OVAL DECAL DANGER PTO DRIVELINE WS INNER SHIELD TUBE RND. WS ASSY COLLAR KIT WS SHIELD CONE 7 RIB WS ZERK WS SUPPORT BEARING WS HEX BOLT M16 X 90 GR 8.8 WS LOCK NUT M16 WS SHIELD CONE 7 RIB WS REINFORCING COLLAR Complete assembly 12/20/ P

52 Table of Contents Part Number Index Driveline CV RPM ( C) Weasler (Applies to RCM3614 only) P /20/17

53 Table of Contents Part Number Index Section 5: Drivelines (1000 RPM) Driveline CV RPM ( C) Weasler (Applies to RCM3614 only) Ref. Part No. Part Description Comments Revision Dwg C Drawing Image Number DRVLN C CV * WE SSL/AUTO-LOK REPAIR KIT WE WWCV AUTO-LOK YOKE ASM WE AB8/AW25EBL CROSS KIT WE WWCV CENTER HOUSING WE YOKE&SHAFT ( SPLINE) WE GUARD REPAIR KIT WE OUTER GUARD WE INNER GUARD WE YOKE, TUBE & SLIP SLEEVE WE 55EBL CROSS KIT WE YOKE WE LOCK NUT WE BOLT X 3.00L GR8 WE JOINT&SHFT HALF ASM W/GUARD WE JOINT&TUBE HALF ASM W/GUARD WE GUARD SET Complete assembly 12/20/ P

54 Table of Contents Part Number Index Driveline CV RPM W/ Overrunning Clutch ( C) (Applies to RCM3614 only) P /20/17

55 Table of Contents Part Number Index Section 5: Drivelines (1000 RPM) Driveline CV RPM W/ Overrunning Clutch ( C) (Applies to RCM3614 only) Ref. Part No. Part Description Comments Revision Dwg C Drawing Image Number DRVLN C CV ORCLTCH * WE SSL/AUTO-LOK REPAIR KIT WE WWCV AUTO-LOK YOKE ASM WE AB8/AW25EBL CROSS KIT WE WWCV CENTER HOUSING WE YOKE&SHAFT ( SPLINE) WE OUTER GUARD WE GUARD REPAIR KIT WE SAFETY SIGN WE SAFETY SIGN WE INNER GUARD WE YOKE, TUBE & SLIP SLEEVE WE 55EBL CROSS KIT WE OVERRUNNING THRST CLTCH ASM Complete assembly 12/20/ P

56 Table of Contents Part Number Index Driveline Slip Clutch ( ) Comer P /20/17

57 Table of Contents Part Number Index Section 5: Drivelines (540 RPM) Driveline Slip Clutch ( ) Comer Ref. Part No. Part Description Comments Revision Dwg Drawing Image Number COMER CLUTCH, COMPLETE ASSY * COMER SPRING COMER YOKE, FLANGED COMER BUSH COMER LINING RING COMER CLUTCH SUPPORT COMER INNER PLATE COMER INTERMEDIATE PLATE COMER PRESSURE PLATE COMER BOLT WITH NUT M10X100 COMER TAPERED PIN SET 1 3/4 Complete assembly 12/20/ P

58 Table of Contents Part Number Index Driveline Slip Clutch ( ) Comer P /20/17

59 Table of Contents Part Number Index Section 5: Drivelines (540 RPM) Driveline Slip Clutch ( ) Comer Ref. Part No. Part Description Comments Revision Dwg Drawing Image Number COMER CLUTCH, DISC COMPLETE * COMER SPRING COMER YOKE, FLANGED COMER BUSH COMER LINING RING COMER CLUTCH SUPPORT COMER INNER PLATE COMER INTERMEDIATE PLATE COMER PRESSURE PLATE COMER BOLT WITH NUT M10X100 COMER TAPERED PIN SET 1 3/4 Complete assembly 12/20/ P

60 Table of Contents Part Number Index Driveline Slip Clutch (396674) Walterscheid P /20/17

61 Table of Contents Part Number Index Section 5: Drivelines (540 RPM) Driveline Slip Clutch (396674) Walterscheid Ref. Part No. Part Description Comments Revision Dwg N/A C Drawing Image Number WS FRICTION CLUTCH * WS FLANGE YOKE WS FRICTION DISK WS HUB 1 3/4-20 I.C. WS THRUST PLATE WS BELLEVILLE SPRING WS HEX BOLT M10X50 NUT HEX NYLOCK M10X1.5 PLT COSMO WING NUT M8 WS HEX BOLT M12X65 Complete assembly 12/20/ P

62 Table of Contents Driveline Wing ( C) Comer Part Number Index P /20/17

63 Table of Contents Driveline Wing ( C) Comer Part Number Index Section 5: Drivelines (540 RPM) Ref. Part No. Part Description Comments Revision Dwg Image No C PTO V80 X NM CLUTCH * COMER YOKE COMPLETE CO CROSS JOURNAL SET CO CIRCLIP CO GREASE NIPPLE COMER YOKE OUTER COMER OUTER TUBE ROLL PIN COMER WIPER CO COMPLETE OUTER TUBE CO INNER TUBE COMER ROLL PIN FOR INNER TUBE COMER INNER YOKE COMER CLUTCH, DISC COMPLETE COMER RETAINING COLLER INNER COMER BOLT COMER RETAINING COLLER INNER N/A CO COMPLETE GUARD W/MANUAL COMER TAPERED PIN SET 1 3/ COMER SPRING COMER YOKE, FLANGED COMER BUSH RPBY COMER CLUTCH SUPPORT COMER INNER PLATE COMER INTERMEDIATE PLATE COMER PRESSURE PLATE COMER BOLT WITH NUT M10X CO HALF FEMALE GUARD CO HALF MALE GUARD CO HALF FEMALE SHFT W/GUARDING CO HALF MALE SHAFT W/GUARDING COMER DANGER LABEL OUTER TUBE COMER DANGER LABEL GUARD OUTER COMER CAP OUTER TUBE, PLASTIC COMER INNER CAP CO LABEL W/CUSTOMER CODE Complete assembly 12/20/ P

64 Table of Contents Driveline ( C) Part Number Index P /20/17

65 Table of Contents Driveline ( C) Part Number Index Section 5: Drivelines (540 RPM) Ref. Part No. Part Description Comments Revision Dwg C C Drawing Image Number DRVLN, INT CAT 4 W/CLUTCH * WS YOKE 1 3/4"-20 SPL WS CROSS BRG KIT WS INBOARD YOKE WS OUTER PROFILE 2A WS SPRING PIN 10 X 20 WS FRICTION CLUTCH EC ZERK DECAL DANGER GUARD MISS PTO Complete assembly 12/20/ P

66 Table of Contents Driveline ( C) Part Number Index P /20/17

67 Table of Contents Driveline ( C) Part Number Index Section 5: Drivelines (540 RPM) Ref. Part No. Part Description Comments Revision Dwg C C C Drawing Image Number DRVLN, WING CAT 4 W/CLUTCH * WS YOKE 1 3/4-20 SPL.I.C WS CROSS BRG KIT WS SHAFT YOKE WS SPRING PIN 10 X 20 WS INNER PROFILE S4LGA WS PROFILE&SLEEVE WA-S5GL WS SHAFT YOKE WS FRICTION CLUTCH WS SHIELD CONE 6 RIB WS BRG RING - SC25 WS GUARD TUBE OUTER WS GUARD TUBE INNER WS SCREW DECAL DANGER PTO DRIVELINE DECAL DANGER GUARD MISS PTO DRIVELINE SHIELD SAFETY CHAIN WS SUPPORT BRG WS ZERK WS REINFORCING COLLAR Complete assembly 12/20/ P

68 Table of Contents Driveline Center ( C) Comer Part Number Index P /20/17

69 Table of Contents Driveline Center ( C) Comer Part Number Index Section 5: Drivelines (540 RPM) Ref. Part No. Part Description Comments Revision Dwg C Image No. PTO E60 X NM CLUTCH * COMER YOKE COMPLETE CO CROSS JOURNAL SET CO CIRCLIP CO GREASE NIPPLE COMER YOKE, OUTER COMER SHAFT, SPLINED COMER ROLL PIN, INNER TUBE CO INNER YOKE COMER CLUTCH, COMPLETE ASSY COMER TAPERED PIN SET 1 3/4 COMER SPRING COMER YOKE, FLANGED COMER BUSH COMER LINING RING COMER CLUTCH SUPPORT COMER INNER PLATE COMER INTERMEDIATE PLATE COMER PRESSURE PLATE COMER BOLT WITH NUT M10X100 Complete assembly 12/20/ P

70 Table of Contents Part Number Index Driveline Conv. 540 RPM ( C) Walterscheid (Applies to RC3614 only) P /20/17

71 Table of Contents Part Number Index Section 5: Drivelines (540 RPM) Driveline Conv. 540 RPM ( C) Walterscheid (Applies to RC3614 only) Ref. Part No. Part Description Comments Revision Dwg C C N/A C C Drawing Image Number PTO 2500 X NO CLUTCH * WS YOKE 1 3/4-20 SPL.I.C WS YOKE 1 3/8"-6 SPL. ASG WS CROSS & BEARING KIT 2500 WS INBOARD YOKE 2500 WS SPRING PIN 10 X 90 WS INNER PROFILE 2400 WS PROFILE & SLEEVE W.A. WS INBOARD YOKE 2400 DECAL DANGER GUARD MISS PTO WALTERSCHEID SCREW WS BEARING RING - SC25 WS OUTER SHIELD TUBE RND. DECAL DANGER PTO DRIVELINE WS INNER SHIELD TUBE ROUND WS Q.D. PIN KIT WS SHIELD CONE 7 RIB WS ZERK WS SUPPORT BEARING WS HEX BOLT M16 X 90 GR 8.8 WS LOCK NUT M16 WS SHIELD CONE - 12 RIB SHIELD KIT, C WS REINFORCING COLLAR Complete assembly Not Available 12/20/ P

72 Table of Contents Part Number Index Driveline CV 540 RPM ( C) Weasler (Applies to RC3614 only) P /20/17

73 Table of Contents Part Number Index Section 5: Drivelines (540 RPM) Driveline CV 540 RPM ( C) Weasler (Applies to RC3614 only) Ref. Part No. Part Description Comments Revision Dwg C N/A Drawing Image Number PTO CV 540 NO CLUTCH * WE SSL/AUTO-LOK REPAIR KIT WE WWCV AUTO-LOK YOKE ASM WE AB8/AW25EBL CROSS KIT WE WWCV CENTER HOUSING WE YOKE&SHAFT ( SPLINE) WE GUARD REPAIR KIT W/ CHAINS WE OUTER GUARD WE INNER GUARD WE YOKE, TUBE & SLIP SLEEVE WE 55EBL CROSS KIT WE YOKE WE LOCK NUT WE BOLT X 3.00L GR8 WE JOINT&SHFT HALF ASM W/GUARD WE JOINT&TUBE HALF ASM W/GUARD WE GUARD SET Complete assembly Not available 12/20/ P

74 Table of Contents Part Number Index Driveline Slip Clutch ( ) Comer P /20/17

75 Table of Contents Part Number Index Section 5: Drivelines (540 RPM) Driveline Slip Clutch ( ) Comer Ref. Part No. Part Description Comments Revision Dwg Drawing Image Number COMER CLUTCH, COMPLETE ASSY * COMER SPRING COMER YOKE, FLANGED COMER BUSH COMER LINING RING COMER CLUTCH SUPPORT COMER INNER PLATE COMER INTERMEDIATE PLATE COMER PRESSURE PLATE COMER BOLT WITH NUT M10X100 COMER TAPERED PIN SET 1 3/4 Complete assembly 12/20/ P

76 Table of Contents Part Number Index Driveline Slip Clutch ( ) Comer P /20/17

77 Table of Contents Part Number Index Section 5: Drivelines (540 RPM) Driveline Slip Clutch ( ) Comer Ref. Part No. Part Description Comments Revision Dwg Drawing Image Number COMER CLUTCH, DISC COMPLETE * COMER SPRING COMER YOKE, FLANGED COMER BUSH COMER LINING RING COMER CLUTCH SUPPORT COMER INNER PLATE COMER INTERMEDIATE PLATE COMER PRESSURE PLATE COMER BOLT WITH NUT M10X100 COMER TAPERED PIN SET 1 3/4 Complete assembly 12/20/ P

78 Table of Contents Part Number Index Driveline Slip Clutch (396674) Walterscheid P /20/17

79 Table of Contents Part Number Index Section 5: Drivelines (540 RPM) Driveline Slip Clutch (396674) Walterscheid Ref. Part No. Part Description Comments Revision Dwg N/A C Drawing Image Number WS FRICTION CLUTCH * WS FLANGE YOKE WS FRICTION DISK WS HUB 1 3/4-20 I.C. WS THRUST PLATE WS BELLEVILLE SPRING WS HEX BOLT M10X50 NUT HEX NYLOCK M10X1.5 PLT COSMO WING NUT M8 WS HEX BOLT M12X65 Complete assembly 12/20/ P

80 Table of Contents Driveline Wing ( C) Comer Part Number Index P /20/17

81 Table of Contents Driveline Wing ( C) Comer Part Number Index Section 5: Drivelines (540 RPM) Ref. Part No. Part Description Comments Revision Dwg Image No C PTO V80 X NM CLUTCH * COMER YOKE COMPLETE CO CROSS JOURNAL SET CO CIRCLIP CO GREASE NIPPLE COMER YOKE OUTER COMER OUTER TUBE ROLL PIN COMER WIPER CO COMPLETE OUTER TUBE CO INNER TUBE COMER ROLL PIN FOR INNER TUBE COMER INNER YOKE COMER CLUTCH, DISC COMPLETE COMER RETAINING COLLER INNER COMER BOLT COMER RETAINING COLLER INNER N/A CO COMPLETE GUARD W/MANUAL COMER TAPERED PIN SET 1 3/ COMER SPRING COMER YOKE, FLANGED COMER BUSH RPBY COMER CLUTCH SUPPORT COMER INNER PLATE COMER INTERMEDIATE PLATE COMER PRESSURE PLATE COMER BOLT WITH NUT M10X CO HALF FEMALE GUARD CO HALF MALE GUARD CO HALF FEMALE SHFT W/GUARDING CO HALF MALE SHAFT W/GUARDING COMER DANGER LABEL OUTER TUBE COMER DANGER LABEL GUARD OUTER COMER CAP OUTER TUBE, PLASTIC COMER INNER CAP CO LABEL W/CUSTOMER CODE Complete assembly 12/20/ P

82 Table of Contents Part Number Index Divider Box 1000 RPM 1.35:1 ( C) (Applies to RCM3614 only) P /20/17

83 Table of Contents Part Number Index Section 6: Gearboxes (1000 RPM) Divider Box 1000 RPM 1.35:1 ( C) (Applies to RCM3614 only) Ref. Part No. Part Description Comments Revision Dwg C A Drawing Image Number DIV BOX 1000RPM 1.35:1 * CO BRG TAPPERED CO CASING CO DUST LIP (45X85X10) CO SNAP RING COMER SHIM KIT CO GEAR M6 Z20 CO SHAFT 1" 3/4 Z20 CO GEAR M6 Z27 CO SHAFT 1" 3/4 Z20 TOP COVER PLATE CO BOLT M10 X CO 1/2" GAS OIL PLUG W/EMB HEX CO PLUG 3/8 GAS (SOLID PLUG) Complete assembly 12/20/ P

84 Table of Contents Gearbox ( C) Part Number Index P /20/17

85 Table of Contents Gearbox ( C) Part Number Index Section 6: Gearboxes (540 RPM) Ref. Part No. Part Description Comments Revision Dwg C A A Drawing Image Number GBOX LF227 1:1 STD * CO CASTING & MACHINING CO CROWN Z17 M7.5 CO BRG TAPPERED COMER SHIM KIT CO SNAP RING UNI 7437 CO CAP CO INPUT SHAFT 1 3/4" Z20 CO DUST LIP (45X85X10) CO COVER CO OIL PLUG 3/8 CO BOLT M10X CO PLUG 1/2" GAS CO SNAP RING (50X47X3) CO SHIM 45.3X2.5 ITG BRG ASSEMBLY COMER SHIM KIT CO OUTPUT SHAFT CO NUT M40X1.5 CO COTTER PIN B 5X60 CO SHIM 40.3 X 61.7 X 1 CO NUT, CASTLE M30 X 2 CO SEAL (50x90x10) CO SEAL RETAINER CO BLANK WASHER CO COTTER PIN B6 X 60 Complete assembly 12/20/ P

86 Table of Contents Gearbox ( C) Part Number Index (Applies to RCM3614 only) P /20/17

87 Table of Contents Gearbox ( C) Part Number Index Section 6: Gearboxes (1000 RPM) (Applies to RCM3614 only) Ref. Part No. Part Description Comments Revision Dwg C A A Drawing Image Number GBOX LF :1 REV * CO CASTING & MACHINING CO GEAR PINION Z17 M5.9 CO BRG TAPPERED COMER SHIM KIT CO SNAP RING UNI 7437 CO CAP CO INPUT SHAFT 1 3/4" Z20 CO DUST LIP (45X85X10) CO COVER CO OIL PLUG 3/8 CO BOLT M10X CO GEAR CROWN Z23 M5.9 CO SNAP RING (50X47X3) CO SHIM 45.3X2.5 ITG BRG ASSEMBLY COMER SHIM KIT CO OUTPUT SHAFT CO NUT M40X1.5 CO COTTER PIN B 5X60 CO PLUG 1/2" GAS CO NUT, CASTLE M30 X 2 CO SEAL (50x90x10) CO SEAL RETAINER CO BLANK WASHER CO SHIM 40.3 X 61.7 X 1 CO SHIM (50.3X60.3X4.9) CO COTTER PIN B6 X 60 Complete assembly 12/20/ P

88 Table of Contents Part Number Index Divider Box 540 RPM 1:1.35 ( C) (Applies to RC3614 only) P /20/17

89 Table of Contents Part Number Index Section 6: Gearboxes (540 RPM) Divider Box 540 RPM 1:1.35 ( C) (Applies to RC3614 only) Ref. Part No. Part Description Comments Revision Dwg C A Drawing Image Number DIV BOX 540RPM 1:1.35 * CO BRG TAPPERED CO CASING CO DUST LIP (45X85X10) CO SNAP RING COMER SHIM KIT CO GEAR M6 Z20 CO SHAFT 1" 3/4 Z20 CO GEAR M6 Z27 CO SHAFT 1" 3/4 Z20 TOP COVER PLATE CO BOLT M10 X CO 1/2" GAS OIL PLUG W/EMB HEX CO PLUG 3/8 GAS (SOLID PLUG) Complete assembly 12/20/ P

90 Table of Contents Gearbox ( C) Part Number Index (Applies to RC3614 only) P /20/17

91 Table of Contents Gearbox ( C) Part Number Index Section 6: Gearboxes (540 RPM) (Applies to RC3614 only) Ref. Part No. Part Description Comments Revision Dwg C A A Drawing Image Number GBOX LF227 1:1.35 REV * CO CASTING & MACHINING CO GEAR CROWN Z23 M5.9 CO BRG TAPPERED COMER SHIM KIT CO SNAP RING UNI 7437 CO CAP CO INPUT SHAFT 1 3/4" Z20 CO DUST LIP (45X85X10) CO COVER CO OIL PLUG 3/8 CO BOLT M10X CO PINION Z17 M5.9 CO SNAP RING (50X47X3) CO SHIM 45.3X2.5 ITG BRG ASSEMBLY COMER SHIM KIT CO OUTPUT SHAFT CO NUT M30 X 1.5 CO COTTER PIN B 5X60 CO PLUG 1/2" GAS CO NUT, CASTLE M30 X 2 CO SEAL (50x90x10) CO SEAL RETAINER CO BLANK WASHER CO COTTER PIN B6 X 60 Complete assembly 12/20/ P

92 Table of Contents Gearbox ( C) Part Number Index P /20/17

93 Table of Contents Gearbox ( C) Part Number Index Section 6: Gearboxes (540 RPM) Ref. Part No. Part Description Comments Revision Dwg C A A Drawing Image Number GBOX LF227 1:1 STD * CO CASTING & MACHINING CO CROWN Z17 M7.5 CO BRG TAPPERED COMER SHIM KIT CO SNAP RING UNI 7437 CO CAP CO INPUT SHAFT 1 3/4" Z20 CO DUST LIP (45X85X10) CO COVER CO OIL PLUG 3/8 CO BOLT M10X CO PLUG 1/2" GAS CO SNAP RING (50X47X3) CO SHIM 45.3X2.5 ITG BRG ASSEMBLY COMER SHIM KIT CO OUTPUT SHAFT CO NUT M40X1.5 CO COTTER PIN B 5X60 CO SHIM 40.3 X 61.7 X 1 CO NUT, CASTLE M30 X 2 CO SEAL (50x90x10) CO SEAL RETAINER CO BLANK WASHER CO COTTER PIN B6 X 60 Complete assembly 12/20/ P

94 Table of Contents Part Number Index Hydraulic Cylinder ( C) Red Lion P /20/17

95 Table of Contents Part Number Index Section 7: Hydraulics Hydraulic Cylinder ( C) Red Lion Ref. Part No. Part Description Comments Revision Dwg C C Drawing Image Number CYL 3X12X1.25 ROD (TIE ROD) * NUT HEX 1/2-13 PLT MON PISTON NUT MON NYLON THREAD PROTECTOR MON PISTON TSS-ISO-WR MON CYL TUBE MON TIE ROD LION ROD CLEVIS 1 1/4 (1PIN) LION CLEVIS CAP 3.0-9/16 ORB MON CYL ROD MON ROD CAP /16ORBTS MON SEAL KIT KR30WR-125 TSS Complete assembly 12/20/ P