Rotary Cutters RC(M)3715 & RCG(M) P Parts Manual. Copyright 2018 Printed 10/25/18

Transcription

1 Rotary Cutters RC(M)3715 & RCG(M) P Parts Manual Read the Operator's Manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! Copyright 2018 Printed 10/25/18 Cover photo may show optional equipment not supplied with standard unit.

2 Table of Contents Section 1: Introduction...4 Using This Manual...4 Manual Replacement Information...4 Manual Revisions...4 Touch-up Paint...4 Hardware Legend...5 Replacement Hardware...5 Serial Numbers...5 Part Number Service Coding...5 Section 2: Decks & Hitches...6 Blade Carrier...6 Deck Center Components...8 Deck Center Drive Components...10 Deck Wing Components...12 Deck Wing Drive Components...14 Hitch A-Frame...16 Hitch Ball Coupler...18 Hitch Bar Tite...20 Hitch Fixed Clevis...22 Hitch LP Performance...24 Hitch Pintle...26 Leveling Rods & Wing Turnbuckles...28 Light Assembly...30 Manual Tube...32 Section 3: Axles...34 Axle Center...34 Axle Wing...36 Spindle & Hub Assembly ( S)...38 Tire Options...40 Section 4: Guards...42 Guards Chain Double Row Front...42 Guards Chain Double Row Rear...44 Guards Chain Single Row Front...46 Guards Chain Single Row Rear...48 Section 5: Drivelines...50 Driveline Center ( C) Comer...50 Driveline CV RPM W/ Overrunning Clutch ( C) Weasler...52 Driveline CV RPM W/ Overrunning Clutch ( C) Weasler...54 Driveline CV 1000 RPM ( C) Weasler...56 Driveline CV 540 RPM ( C) Weasler...58 Driveline Wing ( C) Comer...60 Driveline Wing ( C) Comer...62 Driveline Wing ( C) Walterscheid...64 Section 6: Gearboxes...66 Gearbox ( C) Comer...66 Gearbox ( C) SD Engineering...68 Gearbox ( C) Comer...70 Gearbox ( C) Comer...72 Gearbox ( C) Comer...74 Gearbox ( C) Comer...76 Gearbox ( C) Comer...78 Gearbox Divider 1000 RPM ( C) Comer...80 Gearbox Divider 1000 RPM ( C) SD Engineering..82 Section 7: Hydraulics...84 Hydraulic Cylinder ( C) Red Lion...84 Hydraulic Cylinder ( C) Red Lion...86 Lift Hydraulics...88 Wing Fold Individual Single Acting Cylinders...90 Wing Fold Single Acting Cylinders...92 Wing Fold Dual Acting Cylinders...94 Wing Fold Individual Dual Acting Cylinders...96 Section 8: Decals...98 Decal Placement...98 Touch-up Paints Section 9: Options & Accessories Single Duplex Accessory Copyright All rights reserved. provides this publication as is without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. The illustrations in this manual are not intended for safe and proper assembly or disassembly of equipment. The illustrations are intended for ordering parts only. is registered trademark. All other brands and product names are trademarks or registered trademarks of their respective holders. Printed in the United States of America. 2 RC(M)3715 & RCG(M)3715 Rotary Cutters P 10/25/18

3 Alphabetized Table of Contents A B D G H L Axle Center...34 Axle Wing...36 Blade Carrier...6 Decal Placement...98 Deck Center Components...8 Deck Center Drive Components...10 Deck Wing Components...12 Deck Wing Drive Components...14 Driveline Center ( C) Comer...50 Driveline CV RPM W/ Overrunning Clutch ( C) Weasler...52 Driveline CV RPM W/ Overrunning Clutch ( C) Weasler...54 Driveline CV 1000 RPM ( C) Weasler...56 Driveline CV 540 RPM ( C) Weasler...58 Driveline Wing ( C) Comer...60 Driveline Wing ( C) Comer...62 Driveline Wing ( C) Walterscheid...64 Gearbox ( C) Comer...66 Gearbox ( C) SD Engineering...68 Gearbox ( C) Comer...70 Gearbox ( C) Comer...72 Gearbox ( C) Comer...74 Gearbox ( C) Comer...76 Gearbox ( C) Comer...78 Gearbox Divider 1000 RPM ( C) Comer...80 Gearbox Divider 1000 RPM ( C) SD Engineering...82 Guards Chain Double Row Front...42 Guards Chain Double Row Rear...44 Guards Chain Single Row Front...46 Guards Chain Single Row Rear...48 Hitch A-Frame...16 Hitch Ball Coupler...18 Hitch Bar Tite...20 Hitch Fixed Clevis...22 Hitch LP Performance...24 Hitch Pintle...26 Hydraulic Cylinder ( C) Red Lion...84 Hydraulic Cylinder ( C) Red Lion...86 Touch-up Paints Leveling Rods & Wing Turnbuckles...28 Lift Hydraulics...88 Light Assembly...30 M S T W Manual Tube...32 Single Duplex Accessory Spindle & Hub Assembly ( S)...38 Tire Options...40 Wing Fold Individual Single Acting Cylinders...90 Wing Fold Single Acting Cylinders...92 Wing Fold Dual Acting Cylinders...94 Wing Fold Individual Dual Acting Cylinders /25/18 RC(M)3715 & RCG(M)3715 Rotary Cutters P 3

4 4 RC(M)3715 & RCG(M)3715 Rotary Cutters P 10/25/18

5 10/25/18 RC(M)3715 & RCG(M)3715 Rotary Cutters P 5

6 Blade Carrier Table of Contents Section 2: Decks & Hitches RC(M)3715 & RCG(M)3715 Rotary Cutters P 10/25/18

7 Section 2: Decks & Hitches Blade Carrier Table of Contents Ref. Part No. Part Description Comments Revision Dwg H C C C C C C A Image No. 15 DISHPAN WLDMT LG.HUB(COMER) BLD BLT 1 1/8-12X44 W/.25KEY NUT HEX TOP LOCK 1 1/8-12 PLT WASHER FLAT 1" HARDENED CUTTER BLADE 1/2X4X31 CCW CUTTER BLADE 1/2X4X25 CCW CUTTER BLADE 1/2X4X25 CW BLADE BOLT KIT Center deck (standard) Right deck (standard) Left deck (standard) 10/25/18 RC(M)3715 & RCG(M)3715 Rotary Cutters P 7

8 Deck Center Components Section 2: Decks & Hitches RC(M)3715 & RCG(M)3715 Rotary Cutters P 10/25/18

9 Deck Center Components Section 2: Decks & Hitches Ref. Part No. Part Description Comments Revision Dwg S H H H H H H H H H H H H H C C C C C C C C Image No. MANUAL STORAGE CONTAINER KIT CENTER SKID SHOE CENTER DECK CENTER DECK, GREEN CENTER DECK, ORANGE CENTER DECK, RED CENTER DECK, YELLOW CENTER DECK, GAL CENTER DECK W/DR CENTER DECK W/DR, GREEN CENTER DECK W/DR, ORANGE CENTER DECK W/DR, RED CENTER DECK W/DR, YELLOW CENTER DECK W/DR, GAL GREASE ZERK STRAIGHT 1/4-28 HHCS 5/8-11X4 GR5 HHCS 1/2-13X1 1/2 GR5 NUT HEX WHIZ 1/2-13 PLT GR5 NUT HEX FLANGE LOCK 5/8-11 PLT WASHER FLAT 1/2 USS PLT SPRING HOSE LOOP HEAVY PLUG LP 3" ID RUBBER Beige deck Green deck Orange deck Red deck Yellow deck Galvanized deck Beige deck Green deck Orange deck Red deck Yellow deck Galvanized deck 10/25/18 RC(M)3715 & RCG(M)3715 Rotary Cutters P 9

10 Deck Center Drive Components Section 2: Decks & Hitches RC(M)3715 & RCG(M)3715 Rotary Cutters P 10/25/18

11 Deck Center Drive Components Section 2: Decks & Hitches Ref. Part No. Part Description Comments Revision Dwg D D H H C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C Image No. SHIELD MOUNT BRACKET SPLITTER BOX SHIELD INTERMEDIATE SHIELD SHIELD BRACKET, SPLITTER HHCS 5/16-18X3/4 GR5 HHCS 3/4-10X2 1/4 GR5 HFS 1/4-20X5/8 GR5 HHCS M8X25X45 GR8.8 HHCS 3/8-16X8 GR5 ZNYCR NUT HEX FLG TP LK 5/16-18ZNYCR NUT FLANGE LOCK 3/8-16 PLT NUT HEX NYLOCK 1/4-20 NUT HEX FLG TOP LK 3/4-10 PLT WASHER LOCK SPRING 5/16 PLT WASHER FLAT 5/16 USS PLT WASHER FLAT 3/8 SAE PLT WASHER LOCK SPRING 3/8 PLT WASHER FLAT 5/16 SAE PLT COMER U DIPSTICK COMER VENT # DRVLN C CV DRVLN C CV ORCL DRVLN C CV DRVLN C CV ORCLTCH DRVLN C FX CLTCH GBOX RC :44 STD. GBOX RC :1 STD. DIV. SD/CO 540RPM SU DIV. SD/CO 1000RPM RD DRVLN SHLD CONE, 2 PIECE LONG HHCS M8X25X20 GR8.8 THD-LCK MAGNET, 3 3/16 OD X 57LB FLUSH MOUNT LEVER LATCH HHCS M5X.80X30 GR8.8 NUT HEX M5X RPM 540 RPM 1000 RPM 1000 RPM 540 & 1000 RPM cutter 540 RPM 1000 RPM 540 RPM 1000 RPM 10/25/18 RC(M)3715 & RCG(M)3715 Rotary Cutters P 11

12 Deck Wing Components Section 2: Decks & Hitches RC(M)3715 & RCG(M)3715 Rotary Cutters P 10/25/18

13 Deck Wing Components Section 2: Decks & Hitches Ref. Part No. Part Description Comments Revision Dwg L H D D H H H H H H H H H H H H H H H H H H H H H H H H H C C C C C C C C C C C C C C Image No. ASSY. HINGE ROD WLDMT. HINGE ROD RH REAR DEFLECTOR FOLD LOCK LUG BEVELED SKID SHOE RH RH DECK RH DECK, GREEN RH DECK, ORANGE RH DECK, RED RH DECK, YELLOW RH DECK, GAL RH DECK W/DR RH DECK W/DR, GREEN RH DECK W/DR, ORANGE RH DECK W/DR, RED RH DECK W/DR, YELLOW RH DECK W/DR, GAL LH DECK LH DECK, GREEN LH DECK, ORANGE LH DECK, RED LH DECK, YELLOW LH DECK, GAL LH DECK W/DR LH DECK W/DR, GREEN LH DECK W/DR, ORANGE LH DECK W/DR, RED LH DECK W/DR, YELLOW LH DECK W/DR, GAL GREASE ZERK STRAIGHT 1/4-28 HHCS 3/8-16X1 1/2 GR5 HHCS 5/8-11X1 3/4 GR5 FTHD RHSNB 1/2-13X1 1/4 GR5 PLOW 3/8-16X1 1/4 GR5 NUT HEX 3/8-16 PLT NUT HEX 5/8-11 PLT NUT HEX WHIZ 1/2-13 PLT GR5 NUT HEX WHIZ 3/8-16 PLT WASHER LOCK SPRING 3/8 PLT WASHER FLAT 5/8 SAE PLT WASHER LOCK SPRING 5/8 PLT PIN HTCH.75X50 USBL W/PIN PLUG LP 3" ID RUBBER Right hand beige deck Right hand green deck Right hand orange deck Right hand red deck Right hand yellow deck Right hand galvanized deck Right hand beige deck with deck ring Right hand green deck with deck ring Right hand orange deck with deck ring Right hand red deck with deck ring Right hand yellow deck with deckring Right hand galvanized deck with deck ring Left hand beige deck Left hand green deck Left hand orange deck Left hand red deck Left hand yellow deck Left hand galvanized deck Left hand beige deck with deck ring Left hand green deck with deck ring Left hand orange deck with deck ring Left hand red deck with deck ring Left hand yellow deck with deckring Left hand galvanized deck with deck ring 10/25/18 RC(M)3715 & RCG(M)3715 Rotary Cutters P 13

14 Deck Wing Drive Components Section 2: Decks & Hitches RC(M)3715 & RCG(M)3715 Rotary Cutters P 10/25/18

15 Deck Wing Drive Components Section 2: Decks & Hitches Ref. Part No. Part Description Comments Revision Dwg C C C C C C C C C C C C C Image No. HHCS 3/4-10X2 1/4 GR5 NUT HEX FLG TOP LK 3/4-10 PLT WASHER LOCK SPRING 5/16 PLT WASHER FLAT 5/16 USS PLT COMER U DIPSTICK GBOX RC :47 REV. GBOX RC :44 STD. GBOX :21 REV. GBOX :21 STD. DRVLN C FX CLTCH DRVLN C FX CLTCH DRIVELINE SHIELD CONE, 2 PIECE HHCS M8X25X20 GR8.8 THD-LCK Right wing 540 RPM Left Wing 540 RPM Right wing 1000 RPM Left Wing 1000 RPM Right & left wing. 540 & 1000 RPM Right & left wing. 540 & 1000 RPM 10/25/18 RC(M)3715 & RCG(M)3715 Rotary Cutters P 15

16 Hitch A-Frame Table of Contents Section 2: Decks & Hitches RC(M)3715 & RCG(M)3715 Rotary Cutters P 10/25/18

17 Section 2: Decks & Hitches Hitch A-Frame Table of Contents Ref. Part No. Part Description Comments Revision Dwg H D D D H C C C C C C C C C C C C C C C C C C C C C C Image No. ADJUSTABLE JACK MOUNT PTO HANGER HINGE PTO HANGER PIVOT PIN 1" SHORT TONGUE RHSNB 3/8-16X1 GR5 HHCS 1/2-13X1 1/2 GR5 HHCS 1-8X2 1/2 GR5 RHSNB 1/2-13X1 1/2 GR5 SHLDR BLT 1/2DX1/2L 3/8-16 SS NUT HEX 3/8-16 PLT NUT HEX 1/2-13 PLT NUT HEX 3/4-10 PLT NYLOCK NUT HEX 1-8 PLT NUT HEX WHIZ 1/2-13 PLT GR5 NUT HEX TOP LOCK 1-8 PLT NUT FLANGE LOCK 3/8-16 PLT WASHER FLAT 3/8 USS PLT WASHER LOCK SPRING 3/8 PLT WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1/2 USS PLT WASHER FLAT 3/4 SAE PLT WASHER LOCK SPRING 1 PLT WASHER FLAT 1 USS PLT PIN SPIRAL 3/8X1 1/2 HVY DUTY SPRING HOSE LOOP HEAVY SAFETY CHAIN LB 10/25/18 RC(M)3715 & RCG(M)3715 Rotary Cutters P 17

18 Hitch Ball Coupler Table of Contents Section 2: Decks & Hitches RC(M)3715 & RCG(M)3715 Rotary Cutters P 10/25/18

19 Hitch Ball Coupler Section 2: Decks & Hitches Ref. Part No. Part Description Comments Revision Dwg A H C C Drawing Image Number BALL HITCH, 2 5/16 * 2 5/16" BALL HITCH WELDMENT HHCS 5/8-11X1 3/4 GR5 NUT HEX WHIZ 5/8-11 PLT For 2-5/16" Ball 10/25/18 RC(M)3715 & RCG(M)3715 Rotary Cutters P 19

20 Hitch Bar Tite Table of Contents Section 2: Decks & Hitches RC(M)3715 & RCG(M)3715 Rotary Cutters P 10/25/18

21 Section 2: Decks & Hitches Hitch Bar Tite Table of Contents Ref. Part No. Part Description Comments Revision Dwg A D D H H H H C C C C C C C C C C C C C C C Image No. BAR TITE HITCH * HITCH WEAR PLATE WIDE FORMED HITCH SUPPORT WIDE BAR TITE WIDE TOP SWIVEL RECEIVER PIVOT SHAFT BAR TITE PIVOT WELDMENT GREASE ZERK STRAIGHT 1/4-28 HHCS 5/8-11X1 3/4 GR5 FTHD HHCS 3/4-10X6 GR5 HHCS 1-8X5 1/2 GR5 HHCS 1-8X7 GR8 SPTHD NUT HEX TOP LOCK 1-8 PLT NUT HEX FLANGE LOCK 3/4-10 PLT NUT HEX FLG LOCK 1-8 GR B PLT NUT HEX WHIZ 5/8-11 PLT NUT HEX SLOTTED 1 3/4-5 REGULR WASHER FLAT 3/4 SAE PLT WASHER FLAT 1 USS PLT WASHER HARD 75X75X.25 PLT PIN COTTER 1/4 X 3 PLT BUSHING 50ODX00IDX25 10/25/18 RC(M)3715 & RCG(M)3715 Rotary Cutters P 21

22 Hitch Fixed Clevis Table of Contents Section 2: Decks & Hitches RC(M)3715 & RCG(M)3715 Rotary Cutters P 10/25/18

23 Hitch Fixed Clevis Section 2: Decks & Hitches Ref. Part No. Part Description Comments Revision Dwg A H D H C C C C C C Image No. FIXED CLEVIS HITCH * CLEVIS WELDMENT HITCH SPACER CLEVIS RECIEVER YOKE HHCS 5/8-11X1 3/4 GR5 FTHD HHCS 5/8-11X9 GR5 NUT LOCK 5/8-11 PLT NUT HEX FLG LOCK 1-8 GR B PLT NUT HEX WHIZ 5/8-11 PLT HHCS 1-8X9 1/2 GR8 SPTHD 10/25/18 RC(M)3715 & RCG(M)3715 Rotary Cutters P 23

24 Hitch LP Performance Section 2: Decks & Hitches RC(M)3715 & RCG(M)3715 Rotary Cutters P 10/25/18

25 Hitch LP Performance Section 2: Decks & Hitches Ref. Part No. Part Description Comments Revision Dwg A D H H H C C C C C C C C C C C C Image No. LAND PRIDE PERFORMANCE HITCH * HITCH HOLDER HITCH CLEVIS SWIVEL RECEIVER LPH YOKE GREASE ZERK STRAIGHT 1/4-28 HHCS 5/8-11X1 3/4 GR5 FTHD HHCS 3/8-16X1 1/4 GR5 NUT HEX COUPLER 3/8-16X1 3/4 NUT HEX FLG LOCK 1-8 GR B PLT NUT HEX WHIZ 5/8-11 PLT NUT HEX SLOTTED 1 3/4-5 REGULR WASHER LOCK SPRING 3/8 PLT WASHER HARD 75X75X.25 PLT PIN COTTER 1/4 X 3 PLT HHCS 1-8X7 GR8 SPTHD BUSHING 1 1/4X1X5/8 10/25/18 RC(M)3715 & RCG(M)3715 Rotary Cutters P 25

26 Hitch Pintle Table of Contents Section 2: Decks & Hitches RC(M)3715 & RCG(M)3715 Rotary Cutters P 10/25/18

27 Section 2: Decks & Hitches Hitch Pintle Table of Contents Ref. Part No. Part Description Comments Revision Dwg A H C C C C Image No. FIXED PINTLE HITCH * PINTLE RECEIVER HHCS 5/8-11X1 3/4 GR5 FTHD HFS 5/8-11X2 1/2 GR8 PLT NUT HEX WHIZ 5/8-11 PLT PINTLE HOOK SQ.BASE BDB /25/18 RC(M)3715 & RCG(M)3715 Rotary Cutters P 27

28 Leveling Rods & Wing Turnbuckles Section 2: Decks & Hitches RC(M)3715 & RCG(M)3715 Rotary Cutters P 10/25/18

29 Leveling Rods & Wing Turnbuckles Section 2: Decks & Hitches Ref. Part No. Part Description Comments Revision Dwg H L S C C C C C C C C C C C C C C C C C Image No. LEVELING ROD CENTER DECK ASSY 540 LEVEL ROD ASY GREASE ZERK STRAIGHT 1/4-28 HSHCS 5/16-18X1 3/4 EYE BOLT 1-8X7 1/2 LG PLT SP HHCS 1-8X5 GR8 PLT SPTHD NUT HEX 3/4-10 PLT NYLOCK NUT HEX JAM 1-8 PLT NUT HEX JAM 1 1/4-7 PLT NUT HEX NYLOCK 5/16-18 PLT NUT HEX LOCK 1-8 PLT WASHER FLAT 3/4 SAE PLT WASHER LOCK SPRING 1 PLT WASHER FLAT 1 SAE WASHER LOCK 1 1/4 SPRING PLT PIN COTTER 3/16 X 1 1/2 PLT PIN CLVS 0X06 USBL HHCS 3/4-10X4 GR8 TRNBCKL, 1BORE W/SWIVEL /25/18 RC(M)3715 & RCG(M)3715 Rotary Cutters P 29

30 Light Assembly Table of Contents Section 2: Decks & Hitches RC(M)3715 & RCG(M)3715 Rotary Cutters P 10/25/18

31 Section 2: Decks & Hitches Light Assembly Table of Contents Ref. Part No. Part Description Comments Revision Dwg D D C C C C C C C C C C C Image No. LIGHT GUARD LIGHT MOUNT RHSNB 3/8-16X1 GR5 RHSNB 1/2-13X1 1/4 GR5 HHCS 1/4-20X1 1/4 GR5 NUT HEX WHIZ 1/2-13 PLT GR5 NUT FLANGE LOCK 3/8-16 PLT NUT HEX NYLOCK 1/4-20 WASHER FLAT 1/4 SAE PLT DUAL LED LIGHT RH ENHANCE MODULE LIGHT WIRE HARNESS 2' LEAD WIRE HARNESS 15' 10/25/18 RC(M)3715 & RCG(M)3715 Rotary Cutters P 31

32 Manual Tube Table of Contents Section 2: Decks & Hitches RC(M)3715 & RCG(M)3715 Rotary Cutters P 10/25/18

33 Section 2: Decks & Hitches Manual Tube Table of Contents Ref. Part No. Part Description Comments Revision 4. Dwg S C C C C Image No. MANUAL STORAGE CONTAINER KIT * HHCS 1/4-20X1 GR5 NUT HEX NYLOCK 1/4-20 WASHER FLAT 1/4 SAE PLT MANUAL STORAGE CONTAINER 10/25/18 RC(M)3715 & RCG(M)3715 Rotary Cutters P 33

34 Axle Center Table of Contents Section 3: Axles RC(M)3715 & RCG(M)3715 Rotary Cutters P 10/25/18

35 Section 3: Axles Axle Center Table of Contents Ref. Part No. Part Description Comments Revision Dwg H H H D S C C C C C C C C C C C Image No. PIVOT PIN 4.5" USEABLE CENTER SPRING ROCKER SGL SUSP CENTER AXLE PIVOT PIN 1" LONG SPINDLE AND HUB ASSY HHCS 1/2-13X1 3/4 GR5 FTHD NUT HEX 3/4-10 PLT NYLOCK NUT HEX FLG LOCK 1/2-13 PLT NUT HEX LOCK 1-8 PLT WASHER FLAT 1/2 SAE PLT WASHER FLAT 3/4 SAE PLT WASHER FLAT 1 SAE PIN SPIRAL 3/8X1 1/2 HVY DUTY SPRING COMP 20OD.63W 5.5L SLEEVE BEARING 1 I.D. SLEEVE BEARING 25ID X 25 MON PIN KIT 00C/W COTTER PIN Includes 2 pins and 4 cotter pins 10/25/18 RC(M)3715 & RCG(M)3715 Rotary Cutters P 35

36 Axle Wing Table of Contents Section 3: Axles RC(M)3715 & RCG(M)3715 Rotary Cutters P 10/25/18

37 Section 3: Axles Axle Wing Table of Contents Ref. Part No. Part Description Comments Revision Dwg H H D S C C C C Image No. RH WING AXLE LH WING AXLE PIVOT PIN 1" SHORT SPINDLE AND HUB ASSY NUT HEX 3/4-10 PLT NYLOCK WASHER FLAT 3/4 SAE PLT PIN SPIRAL 3/8X1 1/2 HVY DUTY SLEEVE BEARING 1 I.D. 10/25/18 RC(M)3715 & RCG(M)3715 Rotary Cutters P 37

38 Spindle & Hub Assembly ( S) Section 3: Axles RC(M)3715 & RCG(M)3715 Rotary Cutters P 10/25/18

39 Spindle & Hub Assembly ( S) Section 3: Axles Ref. Part No. Part Description Comments Revision Dwg S D V C C C C C C C C C C C C C C C C Image No. SPINDLE AND HUB ASSY * HUB GREASE CAP HUB 5 BOLT COMPLETE GREASE ZERK 1/4-28 THD FORMING HHCS 1/2-13X3 1/4 GR5 HUB STUD 1/2-20X88 GR5 NUT LOCK 1/2-13 PLT NUT HEX SLOTTED 7/8-14 PLT NUT HEX 1/2-20 X 5/8 HIGH WASHER SPINDLE - 7/8 PIN COTTER 5/32 X 1 3/4 LG HUB 5-BOLT W/CUPS/STUDS SINGLE AXLE SPINDLE, WING HD PURGEABLE SEAL 75X71 BRG CUP LM BRG CONE 25ID LM BRG CUP LM BRG CONE LM HUB 5-BOLT CASTING 10/25/18 RC(M)3715 & RCG(M)3715 Rotary Cutters P 39

40 Tire Options Table of Contents Section 3: Axles RC(M)3715 & RCG(M)3715 Rotary Cutters P 10/25/18

41 Section 3: Axles Tire Options Table of Contents Ref. Part No. Part Description Comments Revision Dwg C C C C C C Drawing Image Number TIRE & WHL LAM. 6X9X21(5-BOLT) AC TIRE FF 24X7.7 2PC 5-BOLT TIRE, AC 29" 16 PLY 5 BOLT NEW TIRE FF 25.5X PLY NEW TIRE 25.5X PLY TIRE & WHL LAM 6X26 (5-BOLT) 10/25/18 RC(M)3715 & RCG(M)3715 Rotary Cutters P 41

42 Guards Chain Double Row Front Section 4: Guards RC(M)3715 & RCG(M)3715 Rotary Cutters P 10/25/18

43 Guards Chain Double Row Front Section 4: Guards Ref. Part No. Part Description Comments Revision Dwg A D D D D D D K K K C C C Image No. DOUBLE CHAIN GUARDS ROUND ROD 1/4 X 34 ROUND ROD 1/4 X 25 ROUND ROD.25 X CHAIN GUARD, FNT WING CHAIN GUARD, FNT CTR OUTSIDE CHAIN GUARD, FNT CTR CHAIN GUARD, DBL FNT WING CHAIN GUARD, DBL FNT CTR OUTER CHAIN GUARD, DBL FNT CTR RHSNB 1/2-13X1 1/4 GR5 NUT HEX WHIZ 1/2-13 PLT GR5 CHAIN WELD 5/16 GR 43 X 9-LINK Includes complete front and rear double chain guard assemblies Left & right wing deck guard Center deck outer guard Center deck guard 10/25/18 RC(M)3715 & RCG(M)3715 Rotary Cutters P 43

44 Guards Chain Double Row Rear Section 4: Guards RC(M)3715 & RCG(M)3715 Rotary Cutters P 10/25/18

45 Guards Chain Double Row Rear Section 4: Guards Ref. Part No. Part Description Comments Revision Dwg A D D D D D K K K K C C C C C C Image No. DOUBLE CHAIN GUARDS ROUND ROD.25 X 9 ROUND ROD 1/4 X 37 3/4 CHAIN GUARD, REAR CTR CHAIN GUARD, REAR CTR OUTER CHAIN GUARD, REAR WING CHAIN GUARD, DBL REAR CTR CHAIN GUARD, DBL REAR CTR OUT CHAIN GUARD, DBL REAR RH WING CHAIN GUARD, DBL REAR LH WING HHCS 3/8-16X1 1/4 GR5 RHSNB 1/2-13X1 1/4 GR5 NUT HEX WHIZ 1/2-13 PLT GR5 NUT FLANGE LOCK 3/8-16 PLT CHAIN WELD 5/16 GR 43X11-LINK CHAIN WELD 5/16 GR 43 X 9-LINK Includes complete front and rear double chain guard assemblies Center deck guard Center deck outer guards Right wing deck guard Left wing deck guard 10/25/18 RC(M)3715 & RCG(M)3715 Rotary Cutters P 45

46 Guards Chain Single Row Front Section 4: Guards RC(M)3715 & RCG(M)3715 Rotary Cutters P 10/25/18

47 Guards Chain Single Row Front Section 4: Guards Ref. Part No. Part Description Comments Revision Dwg A D D D D D D K K K C C C Image No. SINGLE CHAIN GUARDS ROUND ROD 1/4 X 34 ROUND ROD 1/4 X 25 ROUND ROD.25 X CHAIN GUARD, FNT WING CHAIN GUARD, FNT CTR OUTSIDE CHAIN GUARD, FNT CTR CHAIN GUARD, SGL FNT WING CHAIN GUARD, SGL FNT CTR OUTER CHAIN GUARD, SGL FNT CTR RHSNB 1/2-13X1 1/4 GR5 NUT HEX WHIZ 1/2-13 PLT GR5 CHAIN WELD 5/16 GR 43 X 5 LINK Includes complete front and rear single chain guard assemblies Left & right wing deck guard Center deck outer guard Center deck guard 10/25/18 RC(M)3715 & RCG(M)3715 Rotary Cutters P 47

48 Guards Chain Single Row Rear Section 4: Guards RC(M)3715 & RCG(M)3715 Rotary Cutters P 10/25/18

49 Guards Chain Single Row Rear Section 4: Guards Ref. Part No. Part Description Comments Revision Dwg A D D D D D K K K K C C C C C C C Image No. SINGLE CHAIN GUARDS ROUND ROD.25 X 9 ROUND ROD 1/4 X 37 3/4 CHAIN GUARD, REAR CTR CHAIN GUARD, REAR CTR OUTER CHAIN GUARD, REAR WING CHAIN GUARD, SGL REAR CTR CHAIN GUARD, SGL REAR CTR OUT CHAIN GUARD, SGL REAR LH WING CHAIN GUARD, SGL REAR RH WING HHCS 3/8-16X1 1/4 GR5 RHSNB 1/2-13X1 1/4 GR5 NUT HEX WHIZ 1/2-13 PLT GR5 NUT FLANGE LOCK 3/8-16 PLT CHAIN WELD 5/16 GR 43 X 5 LINK CHAIN WELD 5/16 GR 43 X 9-LINK CHAIN 5/16 GR 43 X 6 LINKS PLT Includes complete front and rear single chain guard assemblies Center deck guard Center deck outer guards Left wing deck guard Right wing deck guard 10/25/18 RC(M)3715 & RCG(M)3715 Rotary Cutters P 49

50 Driveline Center ( C) Comer Section 5: Drivelines RC(M)3715 & RCG(M)3715 Rotary Cutters P 10/25/18

51 Driveline Center ( C) Comer Section 5: Drivelines Ref. Part No. Part Description Comments Revision Dwg C Image No. DRVLN C FX CLTCH * COMER YOKE COMPLETE CO CROSS JOURNAL SET CO CIRCLIP CO GREASE NIPPLE COMER YOKE, OUTER COMER SHAFT, SPLINED COMER ROLL PIN, INNER TUBE CO INNER YOKE COMER CLUTCH, COMPLETE ASSY COMER TAPERED PIN SET 1 3/4 COMER SPRING COMER YOKE, FLANGED COMER BUSH RPBY COMER CLUTCH SUPPORT COMER INNER PLATE COMER INTERMEDIATE PLATE COMER PRESSURE PLATE COMER BOLT WITH NUT M10X100 10/25/18 RC(M)3715 & RCG(M)3715 Rotary Cutters P 51

52 Driveline CV RPM W/ Overrunning Clutch ( C) Weasler Applies to RCGM3715, RCM3715 Section 5: Drivelines RC(M)3715 & RCG(M)3715 Rotary Cutters P 10/25/18

53 Driveline CV RPM W/ Overrunning Clutch ( C) Weasler Section 5: Drivelines Applies to RCGM3715, RCM3715 Ref. Part No. Part Description Comments Revision Dwg C Drawing Image Number DRVLN C CV ORCLTCH * WE 55EBL CROSS KIT WE AB8/AW25EBL CROSS KIT WE SAFETY SIGN WE SAFETY SIGN WE DECAL LAND PRIDE WE WWCV CENTER HOUSING WE OVERRUNNING THRST CLTCH ASM WE WWCV AUTO-LOK YOKE ASM WE JOINT & TUBE HALF GUARD SET WE JOINT & SHFT HALF GUARD SET WE YOKE, TUBE & SLIP SLEEVE WE YOKE&SHAFT (69-20 SPLINE) WE SSL/AUTO-LOK REPAIR KIT WE GUARD REPAIR KIT WE GUARD SET WE JOINT&SHFT HALF ASM W/GUARD WE JOINT & TUBE HALF ASM 10/25/18 RC(M)3715 & RCG(M)3715 Rotary Cutters P 53

54 Driveline CV RPM W/ Overrunning Clutch ( C) Weasler Applies to RC3715, RCG3715 Section 5: Drivelines RC(M)3715 & RCG(M)3715 Rotary Cutters P 10/25/18

55 Driveline CV RPM W/ Overrunning Clutch ( C) Weasler Section 5: Drivelines Applies to RC3715, RCG3715 Ref. Part No. Part Description Comments Revision Dwg C Image No. DRVLN C CV ORCL * WE 55EBL CROSS KIT WE AB8/AW25EBL CROSS KIT WE SAFETY SIGN WE SAFETY SIGN WE DECAL LAND PRIDE WE WWCV CENTER HOUSING WE OVERRUNNING THRST CLTCH ASM WE WWCV AUTO-LOK YOKE ASM WE JOINT & TUBE HALF GUARD SET WE JOINT & SHFT HALF GUARD SET WE YOKE, TUBE & SLIP SLEEVE WE YOKE&SHAFT (69-20 SPLINE) WE SSL/AUTO-LOK REPAIR KIT WE GRD REPAIR KIT WE GUARD SET WE JOINT&SHFT HALF ASM W/GUARD WE JOINT & TUBE HALF ASM 10/25/18 RC(M)3715 & RCG(M)3715 Rotary Cutters P 55

56 Driveline CV 1000 RPM ( C) Weasler Section 5: Drivelines Applies to RCGM3715, RCM RC(M)3715 & RCG(M)3715 Rotary Cutters P 10/25/18

57 Driveline CV 1000 RPM ( C) Weasler Section 5: Drivelines Applies to RCGM3715, RCM3715 Ref. Part No. Part Description Comments Revision Dwg C Drawing Image Number DRVLN C CV * WE SSL/AUTO-LOK REPAIR KIT WE WWCV AUTO-LOK YOKE ASM WE AB8/AW25EBL CROSS KIT WE WWCV CENTER HOUSING WE YOKE&SHAFT (69-20 SPLINE) WE GUARD REPAIR KIT WE GRD REPAIR KIT WE OUTER GUARD WE INNER GUARD WE YOKE, TUBE & SLIP SLEEVE WE 55EBL CROSS KIT WE YOKE WE LOCK NUT WE BOLT X 00L GR8 WE JOINT&SHFT HALF ASM W/GUARD WE JOINT&TUBE HALF ASM W/GUARD WE GUARD SET WE CHAIN S/N S/N S/N /25/18 RC(M)3715 & RCG(M)3715 Rotary Cutters P 57

58 Driveline CV 540 RPM ( C) Weasler Section 5: Drivelines Applies to RC3715, RCG RC(M)3715 & RCG(M)3715 Rotary Cutters P 10/25/18

59 Driveline CV 540 RPM ( C) Weasler Section 5: Drivelines Applies to RC3715, RCG3715 Ref. Part No. Part Description Comments Revision Dwg C Drawing Image Number DRVLN C CV * WE SSL/AUTO-LOK REPAIR KIT WE WWCV AUTO-LOK YOKE ASM WE AB8/AW25EBL CROSS KIT WE WWCV CENTER HOUSING WE YOKE&SHAFT (69-20 SPLINE) WE GUARD REPAIR KIT W/ CHAINS WE OUTER GUARD WE INNER GUARD WE YOKE, TUBE & SLIP SLEEVE WE 55EBL CROSS KIT WE YOKE WE LOCK NUT WE BOLT X 00L GR8 WE JOINT&SHFT HALF ASM W/GUARD WE JOINT&TUBE HALF ASM W/GUARD WE GUARD SET WE CHAIN (S/N ) 10/25/18 RC(M)3715 & RCG(M)3715 Rotary Cutters P 59

60 Driveline Wing ( C) Comer Section 5: Drivelines RC(M)3715 & RCG(M)3715 Rotary Cutters P 10/25/18

61 Driveline Wing ( C) Comer Section 5: Drivelines Ref. Part No. Part Description Comments Revision Dwg C Image No. DRVLN C FX CLTCH * COMER YOKE COMPLETE CO CROSS JOURNAL SET COMER CLUTCH, COMPLETE ASSY CO RETAINING COLLAR OUTER TUBE RPBY CO RETAINING COLLAR INNER TUBE CO COMPLETE GUARD W/MANUAL COMER TAPERED PIN SET 1 3/4 COMER SPRING COMER YOKE, FLANGED COMER BUSH RPBY COMER CLUTCH SUPPORT COMER INNER PLATE COMER INTERMEDIATE PLATE COMER PRESSURE PLATE COMER BOLT WITH NUT M10X100 CO HALF FEMALE SHFT W/GUARDING CO HALF MALE SHAFT W/GUARD COMER DANGER LABEL OUTER TUBE COMER DANGER LABEL GUARD OUTER CO LABEL W/CUSTOMER CODE 10/25/18 RC(M)3715 & RCG(M)3715 Rotary Cutters P 61

62 Driveline Wing ( C) Comer Section 5: Drivelines RC(M)3715 & RCG(M)3715 Rotary Cutters P 10/25/18

63 Driveline Wing ( C) Comer Section 5: Drivelines Ref. Part No. Part Description Comments Revision Dwg C Image No. DRVLN C FX CLTCH * COMER YOKE COMPLETE CO CROSS JOURNAL SET N/A CO GREASE NIPPLE COMER YOKE OUTER COMER OUTER TUBE ROLL PIN CO COMPLETE OUTER TUBE W/LABEL COMER INNER TUBE COMER ROLL PIN FOR INNER TUBE COMER INNER YOKE COMER CLUTCH, DISC COMPLETE COMER RETAINING COLLER INNER COMER BOLT COMER RETAINING COLLER INNER CO COMPLETE GUARD W/MANUAL COMER TAPERED PIN SET 1 3/4 COMER SPRING COMER YOKE, FLANGED COMER BUSH RPBY COMER CLUTCH SUPPORT COMER INNER PLATE COMER INTERMEDIATE PLATE COMER PRESSURE PLATE COMER BOLT WITH NUT M10X100 CO HALF FEMALE GUARD CO HALF MALE GUARD CO HALF FEMALE SHFT W/GUARDING CO HALF MALE SHAFT W/GUARDING COMER DANGER LABEL OUTER TUBE COMER DANGER LABEL GUARD OUTER COMER CAP OUTER TUBE, PLASTIC COMER INNER CAP CO LABEL W/CUSTOMER CODE available only in cross journal set (#2) 10/25/18 RC(M)3715 & RCG(M)3715 Rotary Cutters P 63

64 Driveline Wing ( C) Walterscheid Section 5: Drivelines RC(M)3715 & RCG(M)3715 Rotary Cutters P 10/25/18

65 Driveline Wing ( C) Walterscheid Section 5: Drivelines Ref. Part No. Part Description Comments Revision Dwg C C C Image No. DRVLN C FX CLTCH * WS YOKE 1 3/4-20 SPL.I.C WS CROSS & BEARING KIT WS INBOARD YOKE S4 WS SPRING PIN 10 X 90 WS INNER PROFILE S4L WS OUTER PROFILE S5L WS INBOARD YOKE S5 WS FRICTION CLUTCH WS GUARD CONE 7 RIB WS BRG RING - SC25 WS GUARD TUBE OUTER RPBY WS GUARD TUBE INNER WS SCREW DECAL DANGER PTO DRIVELINE DECAL DANGER GUARD MISS PTO WS SUPPORT BEARING WS ZERK WS REINFORCING COLLAR WS GUARD CONE 6 RIB CC LOCK ASSY 10/25/18 RC(M)3715 & RCG(M)3715 Rotary Cutters P 65

66 Gearbox ( C) Comer Applies to RC3715, RCG3715 Section 6: Gearboxes RC(M)3715 & RCG(M)3715 Rotary Cutters P 10/25/18

67 Gearbox ( C) Comer Section 6: Gearboxes Applies to RC3715, RCG3715 Ref. Part No. Part Description Comments Revision Dwg C C C C Drawing Image Number DIV. SD/CO 540RPM SU * CO BOLT M8X CO SPRING WASHER 8.4X13X2 CO COVER T1 BALL BEARING 6209 CO SNAP RING UNI 7437 CO OIL SEAL 45 X 85 X 10 CO CASING CO SHIM 79.9 BALL BEARING 6307 CO PINION Z20 CO SNAP RING 40 UNI 7436 BALL BEARING 6208 CO SNAP RING 80 UNI 7437 CO SHAFT 1 3/4-20 CO OIL SEAL 45 X 80 X 10 CO SHAFT 1 3/4 Z20 CO SNAP RING SW 47 CO GEAR Z24 CO SHIM 84.7 CO PLUG 3/8 GAS CO 1/2" GAS BREATHER PLUG * Notes: Oil Type 80-90W Capacity 5 Pints 10/25/18 RC(M)3715 & RCG(M)3715 Rotary Cutters P 67

68 Gearbox ( C) SD Engineering Applies to RC3715, RCG3715 Section 6: Gearboxes RC(M)3715 & RCG(M)3715 Rotary Cutters P 10/25/18

69 Gearbox ( C) SD Engineering Section 6: Gearboxes Applies to RC3715, RCG3715 Ref. Part No. Part Description Comments Revision Dwg C Image No. DIV. SD/CO 540RPM SU * SD OUTPUT SHAFT SD THRU SHAFT SD 24 TOOTH GEAR SD 20 TOOTH GEAR RPBY C SD BALL BEARING 307 SD BALL BEARING 209 SD OIL SEAL 45X80X10 SD OIL SEAL 45X85X10 SD M8X25X40 HEX HEAD CAPP SW ITG SEALING WASHER SD M8 HELICAL SPRING LOCK WSHR SD 3/8-18 NPT SQ HEAD PLUG SD 3/8-19NPT SQ HEAD PLUG ITG M18 X 5P PLUG VENTED ITG M18 X 5P PLUG (NON-VENT) SD LANDPRIDE I.D. TAG SD SHIM (0.20) SD SHIM (0.30) SD SHIM (0.50) SD SHIM (0.20) SD SHIM (0.30) SD SHIM (0.50) SD HOUSING SD INSPECTION CAP COVER SD RETAINING RING ITG RETAINING RING SD 40DIA SHAFT RETAINING RING SD RETAINING RING 85 S/N S/N Vented plug Non-vented plug S/N S/N /25/18 RC(M)3715 & RCG(M)3715 Rotary Cutters P 69

70 Gearbox ( C) Comer Applies to RC3715, RCG3715 Section 6: Gearboxes RC(M)3715 & RCG(M)3715 Rotary Cutters P 10/25/18

71 Gearbox ( C) Comer Section 6: Gearboxes Applies to RC3715, RCG3715 Ref. Part No. Part Description Comments Revision Dwg C Drawing Image Number GBOX RC :44 STD. * CO COVER CO BOLT M10X22 HHB CO SNAP RING 50 UNI7435 CO INPUT SHAFT CO CAP CO SNAP RING UNI 7437 CO SHIM 84.7 CO BEARING RTA25 CO SHIM 45.3X5 CO PLUG 3/8 GAS CO CASTING & MACHINE CO NUT M30 X 5 CO COTTER PIN B 5X60 CO PINION Z16 M6 CO SHIM 50.3X70.3 ITG BEARING ASSEMBLY CO OUTPUT SHAFT CO SEAL (50x90x10) CO SEAL RETAINER CO BLANK WASHER CO NUT, CASTLE M30 X 2 CO COTTER PIN B6 X 60 CO OIL SEAL 45 X 85 X 10 CO GEAR CROWN Z23 M6 CO 3/8 GAS OIL VENT LEVEL PG. CO OIL PLUG 3/8 * Notes: Oil Type 80-90W Capacity 6 Pints 10/25/18 RC(M)3715 & RCG(M)3715 Rotary Cutters P 71

72 Gearbox ( C) Comer Applies to RC3715, RCG3715 Section 6: Gearboxes RC(M)3715 & RCG(M)3715 Rotary Cutters P 10/25/18

73 Gearbox ( C) Comer Section 6: Gearboxes Applies to RC3715, RCG3715 Ref. Part No. Part Description Comments Revision Dwg C Drawing Image Number GBOX RC :47 REV. * CO INPUT SHAFT CO OIL SEAL 45 X 85 X 10 CO SNAP RING UNI 7437 CO SHIM 84.7 CO BEARING RTA25 CO BOLT M10X22 HHB CO GEAR CROWN Z23 M6 CO SNAP RING 50 UNI7435 CO OIL PLUG 3/8 CO COVER CO SHIM 45.3X5 CO CAP CO PLUG 3/8 GAS CO COTTER PIN B 5X60 CO NUT M30 X 5 CO PINION Z16 M6 CO SHIM 50.3X70.3 REP BY CO CASTING & MACHINE CO SEAL (50x90x10) CO SEAL RETAINER CO OUTPUT SHAFT CO BLANK WASHER CO NUT, CASTLE M30 X 2 CO COTTER PIN B6 X 60 CO 3/8 GAS OIL VENT LEVEL PG. * Notes: Oil Type 80-90W Capacity 6 Pints 10/25/18 RC(M)3715 & RCG(M)3715 Rotary Cutters P 73

74 Gearbox ( C) Comer Applies to RCGM3715, RCM3715 Section 6: Gearboxes RC(M)3715 & RCG(M)3715 Rotary Cutters P 10/25/18

75 Gearbox ( C) Comer Section 6: Gearboxes Applies to RCGM3715, RCM3715 Ref. Part No. Part Description Comments Revision Dwg C Drawing Image Number GEARBOX COMER * CO INPUT SHAFT CO OIL SEAL 45 X 85 X 10 CO SNAP RING UNI 7437 CO SHIM 84.7 CO BEARING RTA25 CO BOLT M10X22 HHB CO PINION Z18 M6 CO SNAP RING 50 UNI7435 CO OIL PLUG 3/8 CO COVER CO SHIM 45.3X5 CO CAP CO PLUG 3/8 GAS CO COTTER PIN B 5X60 CO NUT M40X5 CO GEAR CROWN Z22 M6 CO SHIM 50.3X70.3 ITG BEARING ASSEMBLY REP BY CO CASTING & MACHINE CO SEAL (50x90x10) CO SEAL RETAINER CO OUTPUT SHAFT CO BLANK WASHER CO NUT, CASTLE M30 X 2 CO SHIM 40.3 X 67 X 1 CO COTTER PIN B6 X 60 CO 3/8 GAS OIL VENT LEVEL PG. * Notes: Oil Type 80-90W Capacity 6 Pints 10/25/18 RC(M)3715 & RCG(M)3715 Rotary Cutters P 75

76 Gearbox ( C) Comer Applies to RCGM3715, RCM3715 Section 6: Gearboxes RC(M)3715 & RCG(M)3715 Rotary Cutters P 10/25/18

77 Gearbox ( C) Comer Section 6: Gearboxes Applies to RCGM3715, RCM3715 Ref. Part No. Part Description Comments Revision Dwg C A Drawing Image Number GEARBOX COMER * CO INPUT SHAFT CO OIL SEAL 45 X 85 X 10 CO SNAP RING UNI 7437 CO SHIM 84.7 CO BEARING RTA25 CO BOLT M10X22 HHB CO GEAR CROWN Z22 M6 CO SNAP RING 50 UNI7435 CO OIL PLUG 3/8 CO COVER CO SHIM 45.3X5 CO CAP CO PLUG 3/8 GAS CO COTTER PIN B 5X60 CO NUT M40X5 CO PINION Z18 M6 COMER SHIM KIT RPBY A (SHIM KIT) IGT BEARING ASSEMBLY RPBY BY CO CASTING & MACHINE CO SEAL (50x90x10) CO SEAL RETAINER CO OUTPUT SHAFT CO BLANK WASHER CO NUT, CASTLE M30 X 2 CO SHIM 40.3 X 67 X 1 CO COTTER PIN B6 X 60 CO 3/8 GAS OIL VENT LEVEL PG. * Notes: Oil Type 80-90W Capacity 6 Pints 10/25/18 RC(M)3715 & RCG(M)3715 Rotary Cutters P 77

78 Gearbox ( C) Comer Applies to RCGM3715, RCM3715 Section 6: Gearboxes RC(M)3715 & RCG(M)3715 Rotary Cutters P 10/25/18

79 Gearbox ( C) Comer Section 6: Gearboxes Applies to RCGM3715, RCM3715 Ref. Part No. Part Description Comments Revision Dwg C Drawing Image Number GEARBOX COMER * CO INPUT SHAFT CO OIL SEAL 45 X 85 X 10 CO SNAP RING UNI 7437 CO SHIM 84.7 CO BEARING RTA25 CO BOLT M10X22 HHB CO GEAR CROWN Z22 M6 CO SNAP RING 50 UNI7435 CO OIL PLUG 3/8 CO COVER CO SHIM 45.3X5 CO CAP CO PLUG 3/8 GAS CO COTTER PIN B 5X60 CO NUT M40X5 CO PINION Z18 M6 CO SHIM 50.3X70.3 ITG BEARING ASSEMBLY REP BY CO CASTING & MACHINE CO SEAL (50x90x10) CO SEAL RETAINER CO OUTPUT SHAFT CO BLANK WASHER CO NUT, CASTLE M30 X 2 CO SHIM 40.3 X 67 X 1 CO COTTER PIN B6 X 60 CO 3/8 GAS OIL VENT LEVEL PG. * Notes: Oil Type 80-90W Capacity 6 Pints 10/25/18 RC(M)3715 & RCG(M)3715 Rotary Cutters P 79

80 Gearbox Divider 1000 RPM ( C) Comer Section 6: Gearboxes Applies to RCGM3715, RCM RC(M)3715 & RCG(M)3715 Rotary Cutters P 10/25/18

81 Gearbox Divider 1000 RPM ( C) Comer Section 6: Gearboxes Applies to RCGM3715, RCM3715 Ref. Part No. Part Description Comments Revision Dwg C C C C Drawing Image Number DIV. SD/CO 1000RPM RD * CO BOLT M8X CO SPRING WASHER 8.4X13X2 CO COVER T1 BALL BEARING 6209 CO SNAP RING UNI 7437 CO OIL SEAL 45 X 85 X 10 CO CASING CO SHIM 79.9 BALL BEARING 6307 CO GEAR Z24 CO SNAP RING 40 UNI 7436 BALL BEARING 6208 CO SNAP RING 80 UNI 7437 CO SHAFT 1 3/4-20 CO OIL SEAL 45 X 80 X 10 CO SHAFT 1 3/4 Z20 CO SNAP RING SW 47 CO PINION Z20 CO SHIM 84.7 CO PLUG 3/8 GAS CO 1/2" GAS BREATHER PLUG * Notes: Oil Type 80-90W Capacity 5 Pints 10/25/18 RC(M)3715 & RCG(M)3715 Rotary Cutters P 81

82 Gearbox Divider 1000 RPM ( C) SD Engineering Section 6: Gearboxes Applies to RCGM3715, RCM RC(M)3715 & RCG(M)3715 Rotary Cutters P 10/25/18

83 Gearbox Divider 1000 RPM ( C) SD Engineering Section 6: Gearboxes Applies to RCGM3715, RCM3715 Ref. Part No. Part Description Comments Revision Dwg C C Drawing Image Number DIV. SD/CO 1000RPM RD * SD HOUSING ITG RETAINING RING BRG BALL 6208 SD RETAINING RING SD OUTPUT SHAFT SD OIL SEAL 45X80X10 SD RETAINING RING 85 SD THRU SHAFT SD OIL SEAL 45X85X10 SD BALL BEARING 209 SD 20 TOOTH GEAR SD M8 HELICAL SPRING LOCK WSHR SD 24 TOOTH GEAR SD 3/8-18 NPT SQ HEAD PLUG SD BALL BEARING 307 SD SHIM (0.20) SD SHIM (0.30) SD SHIM (0.50) SD SHIM (0.20) SD SHIM (0.30) SD SHIM (0.50) SD INSPECTION CAP COVER ITG M18 X 5P PLUG VENTED SD M8X25X40 HEX HEAD CAPP SW ITG SEALING WASHER 10/25/18 RC(M)3715 & RCG(M)3715 Rotary Cutters P 83

84 Hydraulic Cylinder ( C) Red Lion Section 7: Hydraulics RC(M)3715 & RCG(M)3715 Rotary Cutters P 10/25/18

85 Hydraulic Cylinder ( C) Red Lion Section 7: Hydraulics Ref. Part No. Part Description Comments Revision Dwg C C C N/A N/A N/A N/A N/A N/A C Drawing Image Number CYL 5X12X25 ROD (TIE ROD) * NUT HEX 3/8-16 PLT MON PISTON NUT LION PIN MON CLEVIS PIN COTTER SCREW SET SH 3/8-16X3/8 TYPE C PLUG 9/16-18UNF MORB SOCKET HD MON ROD SEAL MON PISTON SEAL MON END CAP BACKUP WASHERS MON END CAP O-RING SEAL WIPER ROD MON PISTON WEAR RING LION CYL TUBE 5 X 12 LION TIE ROD 3/8, 12 CYL LION ROD 25 X 12 LION ROD CLEVIS 1 1/8-12UNF LION CLEVIS CAP 5, 9/16 ORB MON ROD CAP5-25-3/4ORB-TSS MON PISTON TSS-ISO-WR MON SEAL KIT Only Found in Kit #20 Only Found in Kit #20 Only Found in Kit #20 Only Found in Kit #20 Only Found in Kit #20 Only Found in Kit #20 10/25/18 RC(M)3715 & RCG(M)3715 Rotary Cutters P 85

86 Hydraulic Cylinder ( C) Red Lion Section 7: Hydraulics RC(M)3715 & RCG(M)3715 Rotary Cutters P 10/25/18

87 Hydraulic Cylinder ( C) Red Lion Section 7: Hydraulics Ref. Part No. Part Description Comments Revision Dwg C C C N/A N/A N/A N/A N/A N/A C Drawing Image Number CYL 3X8X25 ROD (TIE) NO PINS * NUT HEX 1/2-13 PLT MON PISTON NUT SCREW SET SH 3/8-16X3/8 TYPE C LION PLUG 3/4-16UNF SOCKET HD MON ROD SEAL MON PISTON SEAL (PSP) MON END CAP B/U WASHER MON END CAP O-RING SEAL WIPER ROD MON PISTON WEAR RING MON TIE ROD EXTND THD MON PISTON TSS-ISO-WR MON CYL TUBE MON TIE ROD MON ROD CP /16ORB-TS MON CLEVIS CAP MON CYL ROD LION HARDENED ROD CLEVIS 1 1/4 MON SEAL KIT Only found in seal kit #19 Only found in seal kit #19 Only found in seal kit #19 Only found in seal kit #19 Only found in seal kit #19 Only found in seal kit #19 10/25/18 RC(M)3715 & RCG(M)3715 Rotary Cutters P 87

88 Lift Hydraulics Table of Contents Section 7: Hydraulics RC(M)3715 & RCG(M)3715 Rotary Cutters P 10/25/18

89 Section 7: Hydraulics Lift Hydraulics Table of Contents Ref. Part No. Part Description Comments Revision Dwg C C C C C C C C Image No. FILL PLUG VENTED 3/4-16 PLT CYL 3X8X25 ROD (TIE) NO PINS STRK CNTRL SPCRS 125 TO 50 AD 3/4MORB 3/4MJIC CP 3/4FORB MALE QD POPPET TYPE HH3/8R /4MORB 3/4FJIC HG HANDLE - BLACK EXT AD 3/4MORB 3/4FORB (HG) MON PIN KIT 00C/W COTTER PIN Includes 2 clevis pins & 4 cotter pins 10/25/18 RC(M)3715 & RCG(M)3715 Rotary Cutters P 89

90 Wing Fold Individual Single Acting Cylinders Section 7: Hydraulics RC(M)3715 & RCG(M)3715 Rotary Cutters P 10/25/18

91 Wing Fold Individual Single Acting Cylinders Section 7: Hydraulics Ref. Part No. Part Description Comments Revision Dwg C C C C C C C C C C C Image No. VENT PLUG - 9/16-18 PLATED WASHER FLAT 1 SAE PIN COTTER 3/16 X 1 1/2 PLT PIN CLVS 0X4.20 USBL CYL 5X12X25 ROD (TIE ROD) OREL 1/16 9/16MJIC 9/16MORB CP 3/4FORB MALE QD POPPET TYPE HG HANDLE - RED RET HG HANDLE - YELLOW RET AD 3/4MORB 3/4FORB (HG) HH3/8R /4MORB 9/16FJIC LION PIN MON CLEVIS PIN COTTER 10/25/18 RC(M)3715 & RCG(M)3715 Rotary Cutters P 91

92 Wing Fold Single Acting Cylinders Section 7: Hydraulics RC(M)3715 & RCG(M)3715 Rotary Cutters P 10/25/18

93 Wing Fold Single Acting Cylinders Section 7: Hydraulics Ref. Part No. Part Description Comments Revision Dwg C C C C C C C C C C C C Image No. VENT PLUG - 9/16-18 PLATED WASHER FLAT 1 SAE PIN COTTER 3/16 X 1 1/2 PLT PIN CLVS 0X4.20 USBL CYL 5X12X25 ROD (TIE ROD) TE 9/16MJIC OREL 1/16 9/16MJIC 9/16MORB CP 3/4FORB MALE QD POPPET TYPE HH3/8R /4MORB 9/16FJIC HG HANDLE - RED RET AD 3/4MORB 3/4FORB (HG) HH1/4R /16FJIC LION PIN MON CLEVIS PIN COTTER 10/25/18 RC(M)3715 & RCG(M)3715 Rotary Cutters P 93

94 Wing Fold Dual Acting Cylinders Section 7: Hydraulics RC(M)3715 & RCG(M)3715 Rotary Cutters P 10/25/18

95 Wing Fold Dual Acting Cylinders Section 7: Hydraulics Ref. Part No. Part Description Comments Revision Dwg C C C C C C C C C C C C C Image No. WASHER FLAT 1 SAE PIN COTTER 3/16 X 1 1/2 PLT PIN CLVS 0X4.20 USBL CYL 5X12X25 ROD (TIE ROD) TE 9/16MJIC OREL 1/16 9/16MJIC 9/16MORB CP 3/4FORB MALE QD POPPET TYPE HH3/8R /4MORB 9/16FJIC HG HANDLE - RED RET HG HANDLE - RED EXT AD 3/4MORB 3/4FORB (HG) HH1/4R /16FJIC HH1/4R /16FJIC LION PIN MON CLEVIS PIN COTTER 10/25/18 RC(M)3715 & RCG(M)3715 Rotary Cutters P 95

96 Wing Fold Individual Dual Acting Cylinders Section 7: Hydraulics RC(M)3715 & RCG(M)3715 Rotary Cutters P 10/25/18

97 Wing Fold Individual Dual Acting Cylinders Section 7: Hydraulics Ref. Part No. Part Description Comments Revision Dwg C C C C C C C C C C C C C Image No. WASHER FLAT 1 SAE PIN COTTER 3/16 X 1 1/2 PLT PIN CLVS 0X4.20 USBL CYL 5X12X25 ROD (TIE ROD) HH3/8R /16FJIC 3/4MORB OREL 1/16 9/16MJIC 9/16MORB CP 3/4FORB MALE QD POPPET TYPE HG HANDLE - RED RET HG HANDLE - RED EXT HG HANDLE - YELLOW EXT HG HANDLE - YELLOW RET AD 3/4MORB 3/4FORB (HG) HH3/8R /4MORB 9/16FJIC LION PIN MON CLEVIS PIN COTTER 10/25/18 RC(M)3715 & RCG(M)3715 Rotary Cutters P 97

98 Decal Placement Table of Contents Section 8: Decals RC(M)3715 & RCG(M)3715 Rotary Cutters P 10/25/18