Parts Manual. Rotary Cutters RCB6610 & RCBM6610. Copyright 2018 Printed 06/25/ P

Transcription

1 Table of Contents Part Number Index Parts Manual RCB6610 & RCBM6610 Rotary Cutters Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! Cover illustration may show optional equipment not supplied with standard unit. Copyright 2018 Printed 06/25/ P

2 Table of Contents Table of Contents Part Number Index Section 1: Introduction...4 Using This Manual...4 Manual Replacement Information...4 Manual Revisions...4 Touch-up Paint...4 Hardware Legend...5 Replacement Hardware...5 Serial Numbers...5 Part Number Service Coding...5 Section 2: Decks & Hitches...6 Blade Carrier...6 Deck Center Components...8 Deck Center Drive Components...10 Deck Wing Components...12 Deck Wing Drive Components...14 Hitch A-Frame...16 Hitch Ball Coupler...18 Hitch Bar Tite...20 Hitch Performance...22 Hitch Pintle...24 Hitch Standard Pivoting Clevis...26 Leveling Rod...28 Off Center Lights 3.5 Inch (LED)...30 Weight Box...32 Section 3: Axles...34 Axle Center Standard...34 Axle Center Tandem S/N D001113N Axle Center Tandem S/N D001114N Axle Wing Standard...40 Axle Wing Tandem...42 Hub Assembly ( K)...44 Section 4: Guards...46 Guards Chain Double Row Front...46 Guards Chain Double Row Rear...48 Guards Chain Single Row Front...50 Guards Chain Single Row Rear...52 Guards Chain W/ Cable Front...54 Guards Chains W/ Cable Rear...56 Guards Rubber Front...58 Guards Rubber Rear...60 Section 5: Drivelines...62 Driveline Center ( C) Comer...62 Driveline Conv RPM ( C) Walterscheid...64 Driveline Conv. 540 RPM ( C) Walterscheid...66 Driveline CV RPM ( C) Weasler...68 Driveline CV RPM W/ Overrunning Clutch ( C)...70 Driveline CV RPM ( C)...72 Driveline CV 540 RPM ( C) Weasler...74 Driveline Wing ( C) Comer...76 Section 6: Gearboxes (1000)...78 Gearbox ( C) Comer...78 Gearbox ( C)...80 Gearbox ( C)...82 Gearbox 1000 RPM ( C)...84 Gearbox Divider 1000 RPM ( C) Comer...86 Gearbox Divider 1000 RPM ( C) ITG...88 Section 6: Gearboxes (540)...90 Gearbox ( C)...90 Gearbox ( C)...92 Gearbox Divider 540 RPM ( C) Comer...94 Gearbox Divider 540 RPM ( C) ITG...96 Section 7: Hydraulics...98 Hydraulic Cylinder ( C) 3.5 X Hydraulic Cylinder Rephase ( C) Red Lion 3.5 X Hydraulic Cylinder Rephase ( C) Red Lion 3.25 X Hydraulic Cylinders W/ Mounting Components Hydraulic Plumbing Components Section 8: Decals Decals Section 9: Options & Accessories Manual Winch Wing Deck Off Center Lights 3.5 Inch (LED) Retro-Fit ( A) Tire Options Toolbox Part Number Index Copyright 2018 All rights reserved Printed 06/25/18 Great Plains Manufacturing, Inc. provides this publication as is without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. Great Plains Manufacturing, Incorporated Trademarks The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains All other brands and product names are trademarks or registered trademarks of their respective holders. Printed in the United States of America P /25/18

3 Table of Contents Part Number Index Alphabetized Table of Contents Selected Models A Axle Center Standard...34 Axle Center Tandem S/N D001113N Axle Center Tandem S/N D001114N Axle Wing Standard...40 Axle Wing Tandem...42 B Blade Carrier...6 D Decals Deck Center Components...8 Deck Center Drive Components...10 Deck Wing Components...12 Deck Wing Drive Components...14 Driveline Center ( C) Comer...62 Driveline Conv RPM ( C) Walterscheid...64 Driveline Conv. 540 RPM ( C) Walterscheid...66 Driveline CV RPM ( C) Weasler...68 Driveline CV RPM W/ Overrunning Clutch ( C)...70 Driveline CV RPM ( C)...72 Driveline CV 540 RPM ( C) Weasler...74 Driveline Wing ( C) Comer...76 Hydraulic Cylinder Rephase ( C) Red Lion 3.5 X Hydraulic Cylinder Rephase ( C) Red Lion 3.25 X Hydraulic Cylinders W/ Mounting Components Hydraulic Plumbing Components L Leveling Rod...28 M Manual Winch Wing Deck O Off Center Lights 3.5 Inch (LED)...30 Off Center Lights 3.5 Inch (LED) Retro-Fit ( A) T Tire Options Toolbox W Weight Box...32 G Gearbox ( C) Comer...78 Gearbox ( C)...90 Gearbox ( C)...92 Gearbox ( C)...80 Gearbox ( C)...82 Gearbox 1000 RPM ( C)...84 Gearbox Divider 1000 RPM ( C) Comer...86 Gearbox Divider 1000 RPM ( C) ITG...88 Gearbox Divider 540 RPM ( C) Comer...94 Gearbox Divider 540 RPM ( C) ITG...96 Guards Chain Double Row Front...46 Guards Chain Double Row Rear...48 Guards Chain Single Row Front...50 Guards Chain Single Row Rear...52 Guards Chain W/ Cable Front...54 Guards Chains W/ Cable Rear...56 Guards Rubber Front...58 Guards Rubber Rear...60 H Hitch A-Frame...16 Hitch Ball Coupler...18 Hitch Bar Tite...20 Hitch Performance...22 Hitch Pintle...24 Hitch Standard Pivoting Clevis...26 Hub Assembly ( K)...44 Hydraulic Cylinder ( C) 3.5 X /25/ P

4 Table of Contents Part Number Index P /25/18

5 Table of Contents Part Number Index 06/25/ P

6 Blade Carrier Table of Contents Part Number Index P /25/18

7 Blade Carrier Table of Contents Part Number Index Section 2: Decks & Hitches Ref. Part No. Part Description Comments Revision Dwg D H C C C C C C C C C C C A Image No. LARGE ROUND DISHPAN 3/16 WLDMT, 65 SERIES DISHPAN HHCS 3/4-10X2 1/4 GR5 BLD BLT 1 1/8-12X3.44 W/.25KEY NUT HEX TOP LOCK 1 1/8-12 PLT NUT HEX FLANGE LOCK 3/4-10 PLT WASHER FLAT 1 HARD ASTMF436 PN CUTTER BLADE 1/2X4X23 CCW CUTTER BLADE 1/2X4X23 CCW LL CUTTER BLADE 1/2X4X23 CW CUTTER BLADE 1/2X4X29 CCW CUTTER BLADE 1/2X4X29 CCW LL CUTTER BLADE 1/2X4X29 CW BLADE BOLT KIT RH BLADE CARRIER (standard) Right Wing Section Low Lift --- Good for tall weeds and brush RH REVERSE BLADE CENTER BLADE CARRIER (standard) Center Section Low Lift --- Good for tall weeds and brush CENTER REVERSE BLADE 06/25/ P

8 Table of Contents Deck Center Components Part Number Index P /25/18

9 Table of Contents Part Number Index Section 2: Decks & Hitches Deck Center Components Ref. Part No. Part Description Comments Revision Dwg H H H C C C Image No. SKID SHOE DECK, SMOOTH CENTER WO/DR GREEN DECK, SMOOTH CENTER W/DR GREEN HHCS 5/8-11X2 1/2 GR5 NUT HEX FLANGE LOCK 5/8-11 PLT PLUG LP 3" ID RUBBER Without Deck Ring With Deck Ring 06/25/ P

10 Table of Contents Deck Center Drive Components Part Number Index P /25/18

11 Table of Contents Part Number Index Section 2: Decks & Hitches Deck Center Drive Components Ref. Part No. Part Description Comments Revision Dwg S H H H C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C Image No. MANUAL STORAGE CONTAINER KIT TALL SLIDING SHIELD SPLTR MNT SLIDING SHIELD GB MNT, 50/60GB TALL FRONT FIXED SHIELD HHCS 1/4-20X1 GR5 HHCS 5/16-18X3/4 GR5 HHCS 5/8-11X1 3/4 GR5 HHCS 5/8-11X2 1/4 GR5 HHCS 3/4-10X2 1/4 GR5 HHCS 5/16-18X2 1/4 GR5 HHCS M8X1.25X35 GR8.8 NUT HEX NYLOCK 1/4-20 NUT HEX FLANGE LOCK 5/8-11 PLT NUT HEX FLG TOP LK 3/4-10 PLT WASHER FLAT 1/4 SAE PLT WASHER LOCK SPRING 5/16 PLT WASHER FLAT 5/16 USS PLT WASHER FLAT 1/2 SAE PLT WASHER LOCK SPRING 5/8 PLT MANUAL STORAGE CONTAINER KNOB 1/2-13 MALE THD 2 3/8OD DIV BOX 540RPM 1 3/4-20 DIV BOX 1000RPM 1 3/4-20 DRVLN C CV DRVLN C QD DRVLN C QD DRVLN C CV DRVLN C CV DRVLN C CV ORCLTCH GBOX RC60 1:1.60 STD GBOX RC60 1:1.60 REV GBOX RC :1 STD GBOX RC :1 REV DRVLN C FX CLTCH DRIVELINE SHIELD CONE, 2 PIECE DRVLN SHLD CONE, 2 PIECE LONG SHIELD SPACER HHCS M8X1.25X20 GR8.8 THD-LCK Comer & ITG 540 RPM Comer & ITG 1000 RPM 540 RPM constant velocity 540 RPM conventional 1000 RPM conventional 1000 RPM constant velocity 1000 RPM constant velocity 1000 RPM over running clutch 540 RPM reverse gearbox 540 RPM 1000 RPM reverse gearbox 1000 RPM Used only with driveline C 06/25/ P

12 Table of Contents Deck Wing Components Part Number Index P /25/18

13 Table of Contents Part Number Index Section 2: Decks & Hitches Deck Wing Components Ref. Part No. Part Description Comments Revision Dwg H D H H D H H C C C C C C C C C C C K81 Image No. WLDMT. HINGE ROD DEFLECTOR RH DECK, RCB RH WING WO/DR GREEN DECK, RCB RH WING W/DR GREEN WING SKID SHOE HARDENED WING SKID SHOE N/A GREASE ZERK STRAIGHT 1/4-28 HHCS 3/8-16X1 1/2 GR5 RHSNB 3/8-16X1 1/4 GR5 RHSNB 1/2-13X1 1/4 GR5 PLOW 3/8-16X1 1/4 GR5 NUT HEX 3/8-16 PLT NUT HEX WHIZ 1/2-13 PLT NUT HEX WHIZ 3/8-16 PLT WASHER LOCK SPRING 3/8 PLT PIN HTCH.75X5.25 USBL W/PIN PLUG LP 3" ID RUBBER ASSY, SLOPED SIDE SKIRT RH GREEN Without Deck Ring With Deck Ring Available in item 18 06/25/ P

14 Table of Contents Deck Wing Drive Components Part Number Index P /25/18

15 Table of Contents Part Number Index Section 2: Decks & Hitches Deck Wing Drive Components Ref. Part No. Part Description Comments Revision Dwg C C C C C C C C C C C C Image No. HHCS 3/4-10X2 1/4 GR5 NUT HEX FLG TOP LK 3/4-10 PLT WASHER LOCK SPRING 5/16 PLT WASHER FLAT 5/16 USS PLT COMER U DIPSTICK GBOX RC60 1:1.60 REV GBOX RC60 1:1.60 STD GBOX RCM60 1:1.21 REV GBOX RCM60 1:1.21 STD DRVLN C FX CLTCH DRIVELINE SHIELD CONE, 2 PIECE HHCS M8X1.25X20 GR8.8 THD-LCK 540 RPM 540 RPM reverse gearbox 1000 RPM 1000 RPM reverse gearbox 06/25/ P

16 Hitch A-Frame Table of Contents Part Number Index P /25/18

17 Hitch A-Frame Table of Contents Part Number Index Section 2: Decks & Hitches Ref. Part No. Part Description Comments Revision Dwg D D D H H C C C C C C C C C C C C C C C C C C C N/A C C Image No. PTO HANGER BUSHING PTO HANGER STOP PTO HANGER ADJUSTABLE JACK MOUNT HITCH W/ ADJ JACK MNT GREASE ZERK STRAIGHT 1/4-28 HHCS 1-8X2 1/2 GR5 RHSNB 1/2-13X1 1/2 GR5 HHCS 3/8-16X2 GR5 RHSNB 3/8-16X1 1/4 GR5 NUT LOCK 3/8-16 PLT NUT HEX 3/8-16 PLT NUT HEX 1/2-13 PLT NUT HEX 1-8 PLT NUT HEX TOP LOCK 1-8 PLT WASHER FLAT 3/8 USS PLT WASHER LOCK SPRING 3/8 PLT WASHER LOCK SPRING 1/2 PLT WASHER LOCK SPRING 1 PLT WASHER FLAT 1 USS PLT WASHER FLAT 1 SAE PIN ROLL 3/8 X 2 PLT PIN 1.0 X 4.62 USBL HRDN SAFETY CHAIN LB BUSHING 1.25ODX1.00IDX2.87 SIDEWIND JACK 7000 LB 06/25/ P

18 Hitch Ball Coupler Table of Contents Part Number Index P /25/18

19 Table of Contents Part Number Index Section 2: Decks & Hitches Hitch Ball Coupler Ref. Part No. Part Description Comments Revision Dwg A H C C Drawing Image Number 2 5/16" BALL HITCH ASSEMBLY * 2 5/16" BALL HITCH WELDMENT HHCS 5/8-11X1 3/4 GR5 NUT HEX WHIZ 5/8-11 PLT Complete assembly 06/25/ P

20 Hitch Bar Tite Table of Contents Part Number Index P /25/18

21 Hitch Bar Tite Table of Contents Part Number Index Section 2: Decks & Hitches Ref. Part No. Part Description Comments Revision Dwg A H H H D D H C C C C C C C C C C C C C C C K Drawing Image Number BAR TITE HITCH * SHAFT WELDMENT WELDMENT HITCH CLEVIS SWIVEL RECEIVER HITCH WEAR PLATE WIDE FORMED HITCH SUPPORT WIDE BAR TITE WIDE TOP GREASE ZERK STRAIGHT 1/4-28 HHCS 5/8-11X1 3/4 GR5 HHCS 3/4-10X6 GR5 HHCS 1-8X6 1/2 GR5 HHCS 1-8X5 1/2 GR5 NUT HEX TOP LOCK 1-8 PLT NUT HEX FLANGE LOCK 3/4-10 PLT NUT HEX FLG LOCK 1-8 GR B PLT NUT HEX SLOTTED 1 1/2-6 PLT NUT HEX WHIZ 5/8-11 PLT WASHER FLAT 3/4 SAE PLT WASHER FLAT 1 USS PLT WASHER FLAT 1.50 HARD ASTMF436 PIN COTTER 1/4 X 2 1/2 PLT BUSHING 1.50ODX1.00IDX1.25 BAR TITE HITCH WIDE Complete assembly 06/25/ P

22 Table of Contents Hitch Performance Part Number Index P /25/18

23 Table of Contents Part Number Index Section 2: Decks & Hitches Hitch Performance Ref. Part No. Part Description Comments Revision Dwg A H D H H C C C C C C C C C C C C C Image No. LP PERFORMANCE HITCH * SWIVEL RECEIVER HITCH HOLDER HITCH CLEVIS HITCH YOKE GREASE ZERK STRAIGHT 1/4-28 HHCS 5/8-11X1 3/4 GR5 HHCS 1-8X7 GR5 HHCS 3/8-16X1 1/4 GR5 NUT HEX COUPLER 3/8-16X1 3/4 NUT HEX FLG LOCK 1-8 GR B PLT NUT HEX SLOTTED 1 1/2-6 PLT NUT HEX WHIZ 5/8-11 PLT WASHER LOCK SPRING 3/8 PLT WASHER FLAT 1.50 HARD ASTMF436 PIN COTTER 1/4 X 2 1/2 PLT BUSHING 1 1/4X1X1/2 HRD BUSHING 1 1/4X1X5/8 Complete assembly 06/25/ P

24 Hitch Pintle Table of Contents Part Number Index P /25/18

25 Hitch Pintle Table of Contents Part Number Index Section 2: Decks & Hitches Ref. Part No. Part Description Comments Revision Dwg A H L H H C C C C C C C C C C Drawing Image Number PINTLE HITCH * WLDMT. CLEVIS LEVEL ROD ASSY. LEVEL ROD CLEVIS WLDMT. PINTLE HITCH CLEVIS YOKE HITCH HHCS 5/8-11X1 3/4 GR5 HHCS 1-8X9 GR8 SPTHD HFS 5/8-11X2 1/2 GR8 PLT NUT HEX WHIZ 5/8-11 PLT NUT HEX FLG LOCK 1-8 GR B PLT NUT HEX WHIZ 5/8-11 PLT WASHER FLAT 3/4 SAE PLT PIN COTTER 5/32 X 1 1/4 LG PIN CLEVIS 3/4 X 1 1/2 PINTLE HOOK SQ.BASE BDB Complete assembly 06/25/ P

26 Table of Contents Hitch Standard Pivoting Clevis Part Number Index P /25/18

27 Table of Contents Part Number Index Section 2: Decks & Hitches Hitch Standard Pivoting Clevis Ref. Part No. Part Description Comments Revision Dwg A H H L H C C C C C C C Drawing Image Number STANDARD HITCH * WLDMT. TONGUE CLEVIS WLDMT. CLEVIS LEVEL ROD ASSY. LEVEL ROD CLEVIS YOKE HITCH HHCS 5/8-11X1 3/4 GR5 HHCS 1-8X9 GR8 SPTHD NUT HEX WHIZ 5/8-11 PLT NUT HEX FLG LOCK 1-8 GR B PLT WASHER FLAT 3/4 SAE PLT PIN COTTER 5/32 X 1 1/4 LG PIN CLEVIS 3/4 X 1 1/2 Complete assembly 06/25/ P

28 Leveling Rod Table of Contents Part Number Index P /25/18

29 Leveling Rod Table of Contents Part Number Index Section 2: Decks & Hitches Ref. Part No. Part Description Comments Revision Dwg H L C C C C C C C C Drawing Image Number LEVELING ROD ASY LEVELING ROD HHCS 3/4-10X3 GR8 EYE BOLT 1-8X6 1/2 LG PLT SP NUT HEX 3/4-10 PLT NYLOCK NUT HEX JAM 1-8 PLT WASHER LOCK SPRING 1 PLT WASHER FLAT 1 SAE PIN COTTER 3/16 X 1 1/2 PLT PIN CLEVIS 1 X 2 1/16 USABLE 06/25/ P

30 Table of Contents Off Center Lights 3.5 Inch (LED) Part Number Index P /25/18

31 Table of Contents Part Number Index Section 2: Decks & Hitches Off Center Lights 3.5 Inch (LED) Ref. Part No. Part Description Comments Revision Dwg L A D D D C C C C C C C C C J-37-R J-37-A J-AC1-15-B C J-37-R J-37-A J-AC1-15-B C C C C C Image No. OFFSET CUTTER LIGHT KIT 3.5" OFFSET CUTTER LIGHT KIT 3.5" * LIGHT MNT LIGHT GUARD LIGHT MNT CLAMP CABLE TIE.19X DIA 50LB RHSNB 3/8-16X1 GR5 HHCS 3/8-16X4 1/2 GR5 HHCS 1/4-20X1 1/4 GR5 NUT LOCK 3/8-16 NYLON INSERT NUT FLANGE LOCK 3/8-16 PLT NUT HEX NYLOCK 1/4-20 WASHER FLAT 1/4 SAE PLT DUAL LED LIGHT LH RED LED LENS MODULE AMBER LED LENS MODULE BLACK LENS COVER DUAL LED LIGHT RH RED LED LENS MODULE AMBER LED LENS MODULE BLACK LENS COVER RH LIGHT WIRE HARNESS 8' LH LIGHT WIRE HARNESS 8' ENHANCE MODULE LEAD WIRE HARNESS 8' LIGHT MAGNETS WITH HARDWARE S/N D001092N+ Lights are now standard (Complete Assembly) S/N D001091N- Lights were optional Complete light assembly Red lens Amber lens Black lens Complete light assembly Red lens Amber lens Black lens 06/25/ P

32 Weight Box Table of Contents Part Number Index P /25/18

33 Weight Box Table of Contents Part Number Index Section 2: Decks & Hitches Ref. Part No. Part Description Comments Revision dwg L H D D D D D D H H K K C C C C C C C C C C C C C C C R Drawing Image Number ASSY. HINGE ROD WLDMT. HINGE ROD CHAINGUARD, WEIGHT BOX REAR CHAINGUARD, WEIGHT BOX FRT SKID SHOE WTBX ROUND ROD.25 X 14 ROUND ROD.25 X LOCK, WEIGHTBOX FRT WEIGHT BOX 56 SERIES LH CLEVIS WEIGHTBOX LOCK CHNGRD DBL REAR WGHTBX CHNGRD CBL FRT WGHTBX HHCS 3/8-16X1 1/2 GR5 HHCS 1/2-13X1 1/2 GR5 RHSNB 1/2-13X1 1/2 GR5 RHSNB 1/2-13X1 1/4 GR5 HHCS 1-8X3 GR5 PLOW 3/8-16X1 1/4 GR5 NUT HEX 3/8-16 PLT NUT HEX JAM 1 1/4-7 PLT NUT HEX WHIZ 1/2-13 PLT NUT HEX WHIZ 3/8-16 PLT NUT HEX SIDE LOCK 1-8 PLT WASHER LOCK SPRING 3/8 PLT SIDEWIND JACK 7000 LB CHAIN WELD 5/16 PRF X 11-LINK SWAGE CLAMP, 3/16 CABLE AIRCRAFT CBL.3/16 7X7 GALV. 06/25/ P

34 Table of Contents Axle Center Standard Part Number Index P /25/18

35 Table of Contents Part Number Index Section 3: Axles Axle Center Standard Ref. Part No. Part Description Comments Revision Dwg D H H H S K H H S C C C C C C C C C C C C C C C C C C C C C C C C Image No. PROTECTOR DUST CAP AXLE CENTER STD REP TOW LUG PIVOT PIN TRAILING ARM ASY PIVOT PIN TRAILING ARM HUB 5 BOLT COMPLETE TRAILING ARM CENTER TRAILING ARM PIVOT PIN TRAILING ARM PIVOT PIN ASY GREASE ZERK STRAIGHT 1/4-28 GREASE ZERK 1/4-28 X 90-DEG SCREW SLOTTED HEX 1/4-28X3/16 HHCS 1/2-13X1 3/4 GR5 HHCS 1/2-13X3 1/4 GR5 HHCS 3/8-16X2 GR5 NUT LOCK 3/8-16 PLT NUT LOCK 1/2-13 PLT NUT LOCK 5/8-11 PLT NUT HEX FLG LOCK 1/2-13 PLT NUT HEX 1/2-20 X 5/8 HIGH NUT HEX JAM SLOTTED 1 1/4-7 WASHER FLAT 1/2 SAE PLT WASHER LOCK SPRING 5/8 PLT WASHER FLAT 1 SAE PIN COTTER 3/16 X 2 PIN COTTER 3/16 X 1 1/2 PLT PIN 1.0X4.42 USBL HRD PLT PIN CLVS 1.0X2.06 USBL U-BOLT 5/8-11 X 4 17/32 X 6 SPRING COMP 3.20OD.63W 5.5L SPINDLE, DUAL BOLT-ON 7/8-14 BUSHING 1.25ODX1.00IDX2.87 BHG 1.50ODX1.25X1.38 S/N D001067N- S/N D001067N- S/N D001068N+ S/N D001068N+ S/N D001067N- S/N D001068N+ 06/25/ P

36 Table of Contents Axle Center Tandem S/N D001113N- Part Number Index P /25/18

37 Table of Contents Part Number Index Section 3: Axles Axle Center Tandem S/N D001113N- Ref. Part No. Part Description Comments Revision Dwg H D H H K H H S C C C C C C C C C C C C C C C C C C C C C C C S Image No. AXLE CENTER TANDEM PROTECTOR DUST CAP TOW LUG PIVOT PIN TANDEM ARM HUB 5 BOLT COMPLETE TANDEM ARM, SHORT WALKING TANDEM PIVOT PIN WALKING TANDEM PIV PIN ASY GREASE ZERK STRAIGHT 1/4-28 GREASE ZERK 1/4-28 X 90-DEG SCREW SLOTTED HEX 1/4-28X3/16 HHCS 1/2-13X1 3/4 GR5 HHCS 1/2-13X3 1/4 GR5 HHCS 3/8-16X2 GR5 NUT LOCK 3/8-16 PLT NUT LOCK 1/2-13 PLT NUT LOCK 5/8-11 PLT NUT HEX FLG LOCK 1/2-13 PLT NUT HEX 1/2-20 X 5/8 HIGH NUT HEX JAM SLOTTED 1 1/4-7 WASHER FLAT 1/2 SAE PLT WASHER LOCK SPRING 5/8 PLT WASHER FLAT 1 SAE PIN COTTER 3/16 X 2 PIN COTTER 3/16 X 1 1/2 PLT PIN 1.0X4.42 USBL HRD PLT PIN CLVS 1.0X2.06 USBL U-BOLT 5/8-11 X 4 17/32 X 6 SPINDLE, SINGLE BOLT-ON 7/8-14 BUSHING 1.25ODX1.00IDX2.87 BHG 1.50ODX1.25X1.38 ASY PIVOT PIN TANDEM ARM S/N D001067N- S/N D001068N+ S/N D001068N+ S/N D001067N- S/N D001067N- 06/25/ P

38 Table of Contents Axle Center Tandem S/N D001114N+ Part Number Index P /25/18

39 Table of Contents Part Number Index Section 3: Axles Axle Center Tandem S/N D001114N+ Ref. Part No. Part Description Comments Revision Dwg D H K H H H H H C C C C C C C C C C C C C C C C C C C C C C C C C C C C Image No. PROTECTOR DUST CAP TOW LUG HUB 5 BOLT COMPLETE TANDEM ARM, SHORT PIVOT PIN 4.5" USEABLE CENTER SPRING ROCKER WALKING TANDEM PIVOT PIN AXLE CENTER TANDEM GREASE ZERK STRAIGHT 1/4-28 HHCS 1/2-13X1 3/4 GR5 FTHD HHCS 1/2-13X3 1/4 GR5 HHCS 3/8-16X2 GR5 HFSS 1/4-20X1/2 GR5 RHSNB 5/16-18X1 GR5 NUT LOCK 3/8-16 PLT NUT LOCK 1/2-13 PLT NUT LOCK 5/8-11 PLT NUT HEX WHIZ 5/16-18 PLT NUT HEX FLG LOCK 1/2-13 PLT NUT HEX FLANGE 1/4-20 PLT NUT HEX LOCK 1-8 PLT NUT HEX JAM SLOTTED 1 1/4-7 WASHER FLAT 1/2 SAE PLT WASHER LOCK SPRING 5/8 PLT WASHER FLAT 1 SAE PIN COTTER 3/16 X 2 PIN COTTER 3/16 X 1 1/2 PLT PIN 1.0X4.42 USBL HRD PLT PIN CLVS 1.0X2.06 USBL U-BOLT 5/8-11 X 4 17/32 X 6 SPRING COMP 3.20OD.63W 5.5L SPINDLE, SINGLE BOLT-ON 7/8-14 DECAL SLOW MOVING-GALV. BACKED SMV MOUNTING BLADE SMV MOUNTING SOCKET BHG 1.50ODX1.25X /25/ P

40 Table of Contents Axle Wing Standard Part Number Index P /25/18

41 Table of Contents Part Number Index Section 3: Axles Axle Wing Standard Ref. Part No. Part Description Comments Revision Dwg D H H S K H L H S C C C C C C C C C C C C C C C C C C C Image No. PROTECTOR DUST CAP AXLE WING STD REP RH PIVOT PIN TRAILING ARM WG ASY PIVOT PIN TRAIL ARM WG HUB 5 BOLT COMPLETE TRAILING ARM WING SPINDLE AND HUB ASSY WING TRAILING ARM PIVOT PIN WING TRAILING ARM PIV PIN ASY GREASE ZERK STRAIGHT 1/4-28 GREASE ZERK 1/4-28 X 90-DEG SCREW SLOTTED HEX 1/4-28X3/16 HHCS 1/2-13X1 3/4 GR5 HHCS 1/2-13X3 1/4 GR5 HHCS 3/8-16X2 GR5 NUT LOCK 3/8-16 PLT NUT LOCK 1/2-13 PLT NUT HEX FLG LOCK 1/2-13 PLT NUT HEX 1/2-20 X 5/8 HIGH NUT HEX JAM SLOTTED 1 1/4-7 WASHER FLAT 1/2 SAE PLT PIN COTTER 3/16 X 2 PIN 1.0X4.42 USBL HRD PLT SPRING COMP 3.20OD.63W 5.5L SINGLE AXLE SPINDLE, WING BUSHING CYL 1 1/4 X 1 X 1 BUSHING 1.25ODX1.00IDX2.87 BHG 1.50ODX1.25X1.38 S/N D001067N- S/N D001067N- S/N D001068N+ S/N D001068N+ S/N D001067N- S/N D001068N+ 06/25/ P

42 Table of Contents Axle Wing Tandem Part Number Index P /25/18

43 Table of Contents Part Number Index Section 3: Axles Axle Wing Tandem Ref. Part No. Part Description Comments Revision Dwg H D S H K H H S C C C C C C C C C C C C C C C C C C Image No. AXLE RH TANDEM PROTECTOR DUST CAP ASY PIVOT PIN TANDEM ARM PIVOT PIN TANDEM ARM HUB 5 BOLT COMPLETE TANDEM ARM, SHORT WALKING TANDEM PIVOT PIN WALKING TANDEM PIV PIN ASY GREASE ZERK STRAIGHT 1/4-28 GREASE ZERK 1/4-28 X 90-DEG SCREW SLOTTED HEX 1/4-28X3/16 HHCS 1/2-13X1 3/4 GR5 HHCS 1/2-13X3 1/4 GR5 HHCS 3/8-16X2 GR5 NUT LOCK 3/8-16 PLT NUT LOCK 1/2-13 PLT NUT HEX FLG LOCK 1/2-13 PLT NUT HEX 1/2-20 X 5/8 HIGH NUT HEX JAM SLOTTED 1 1/4-7 WASHER FLAT 1/2 SAE PLT PIN COTTER 3/16 X 2 PIN 1.0X4.42 USBL HRD PLT SPINDLE, SINGLE BOLT-ON 7/8-14 BUSHING CYL 1 1/4 X 1 X 1 BUSHING 1.25ODX1.00IDX2.87 BHG 1.50ODX1.25X1.38 Right Wing S/N D001067N- S/N D001067N- S/N D001068N+ S/N D001068N+ S/N D001067N- S/N D001068N+ 06/25/ P

44 Table of Contents Hub Assembly ( K) Part Number Index P /25/18

45 Table of Contents Part Number Index Section 3: Axles Hub Assembly ( K) Ref. Part No. Part Description Comments Revision Dwg D K C C C C C C C C C C C C C Image No. HUB GREASE CAP HUB 5 BOLT COMPLETE GREASE ZERK 1/4-28 THD FORMING HUB STUD 1/2-20X1.88 GR5 NUT HEX SLOTTED 7/8-14 PLT NUT HEX 1/2-20 X 5/8 HIGH WASHER SPINDLE - 7/8 PIN COTTER 5/32 X 1 3/4 LG HUB 5-BOLT W/CUPS/STUDS SEAL 1.75ID CR17617 BRG CUP LM BRG CONE 1.25ID LM BRG CUP LM BRG CONE LM HUB 5-BOLT CASTING 06/25/ P

46 Table of Contents Guards Chain Double Row Front Part Number Index P /25/18

47 Table of Contents Part Number Index Section 4: Guards Guards Chain Double Row Front Ref. Part No. Part Description Comments Revision dwg A D D D D K D D K K C C C C C Drawing Image Number CHAINGUARD DOUBLE FRONT * ROUND ROD 1/4 X 31 1/2 ROUND ROD 1/4 X 25 ROUND ROD.25 X CHAINGUARD, DBL FR WING CHAINGUARD, DBL FRT WING CHAINGUARD DBL FRT CTR INNER CHNGRD, DBL FRT CTR OUTER CHNGRD DBL FRT CTR INNER CHNGRD DBL FRT CTR OUTER RHSNB 1/2-13X1 1/4 GR5 NUT HEX WHIZ 1/2-13 PLT CHAIN 5/16 PROOF X 6 LINKS PLT CHAIN WELD 5/16 PROOF X 5 LINK CHAIN WELD 5/16 PROOF X 4 LINK Complete assembly 06/25/ P

48 Table of Contents Guards Chain Double Row Rear Part Number Index P /25/18

49 Table of Contents Part Number Index Section 4: Guards Guards Chain Double Row Rear Ref. Part No. Part Description Comments Revision dwg A D D D D K K D C C C C Drawing Image Number CHAINGUARD DOUBLE REAR * ROUND ROD 1/4 X 36 ROUND ROD.25 X 59 CHAINGUARD DBL REAR CTR CHNGRD DBL REAR WING RH CHNGRD DBL REAR CTR CHNGRD DBL REAR WING RH CHAIN REV. DEFLECTOR REAR WING RHSNB 1/2-13X1 1/4 GR5 NUT HEX WHIZ 1/2-13 PLT CHAIN WELD 5/16 PROOF X 5 LINK CHAIN WELD 5/16 PROOF X 4 LINK Complete assembly 06/25/ P

50 Table of Contents Guards Chain Single Row Front Part Number Index P /25/18

51 Table of Contents Part Number Index Section 4: Guards Guards Chain Single Row Front Ref. Part No. Part Description Comments Revision dwg A D D D D K D D K K C C C C Drawing Image Number CHAINGUARD SINGLE FRONT * ROUND ROD 1/4 X 31 1/2 ROUND ROD 1/4 X 25 CHAINGUARD, SGL FR WING ROUND ROD.25 X CHAINGUARD, SGL FRT WING CHAINGUARD SGL FRT CTR INNER CHNGRD, SGL FRT CTR OUTER CHNGRD SGL FRT CTR INNER CHNGRD SGL FRT CTR OUTER RHSNB 1/2-13X1 1/4 GR5 NUT HEX WHIZ 1/2-13 PLT CHAIN 5/16 PROOF X 6 LINKS PLT CHAIN WELD 5/16 PROOF X 5 LINK Complete assembly 06/25/ P

52 Table of Contents Guards Chain Single Row Rear Part Number Index P /25/18

53 Table of Contents Part Number Index Section 4: Guards Guards Chain Single Row Rear Ref. Part No. Part Description Comments Revision Dwg A D D D D K K C C C C D C C C Drawing Image Number CHAINGUARD SINGLE REAR * ROUND ROD 1/4 X 36 ROUND ROD.25 X 59 CHAINGUARD SGL REAR CTR CHNGRD SGL REAR WING RH CHNGRD SGL REAR CTR CHNGRD SGL REAR WING RH RHSNB 1/2-13X1 1/4 GR5 NUT HEX WHIZ 1/2-13 PLT CHAIN WELD 5/16 PROOF X 5 LINK CHAIN WELD 5/16 PROOF X 4 LINK CHAIN REV. DEFLECTOR REAR WING HHCS 3/8-16X1 1/4 GR5 NUT FLANGE LOCK 3/8-16 PLT WASHER FLAT 3/8 USS PLT Complete assembly 06/25/ P

54 Table of Contents Guards Chain W/ Cable Front Part Number Index P /25/18

55 Table of Contents Part Number Index Section 4: Guards Guards Chain W/ Cable Front Ref. Part No. Part Description Comments Revision dwg A D D D D D D K K K C C C C C C R R R C Drawing Image Number CHAINGUARD CABLE FRONT * ROUND ROD 1/4 X 31 1/2 ROUND ROD 1/4 X 25 ROUND ROD.25 X CHAINGUARD, DBL FR WING CHAINGUARD DBL FRT CTR INNER CHNGRD, DBL FRT CTR OUTER CHAINGUARD, FRT CBL WING CHNGRD CBL FRT CTR INNER CHNGRD CBL FRT CTR OUTER RHSNB 1/2-13X1 1/4 GR5 NUT HEX WHIZ 1/2-13 PLT CHAIN 5/16 PROOF X 6 LINKS PLT CHAIN WELD 5/16 PROOF X 5 LINK CHAIN WELD 5/16 PROOF X 4 LINK U-BOLT WIRE ROPE CLP 3/16 GAL. AIRCRAFT CBL.3/16 7X7 GALV. AIRCRAFT CBL.3/16 7X7 GALV. AIRCRAFT CBL.3/16 7X7 GALV. SWAGE CLAMP, 3/16 CABLE Complete assembly Alternate 5' Required 6' Required 2' Required Or Use C 06/25/ P

56 Table of Contents Guards Chains W/ Cable Rear Part Number Index P /25/18

57 Table of Contents Part Number Index Section 4: Guards Guards Chains W/ Cable Rear Ref. Part No. Part Description Comments Revision dwg A D D D D K K C C C C C R R C D Drawing Image Number CHAINGUARD CABLE REAR * ROUND ROD 1/4 X 36 ROUND ROD.25 X 59 CHAINGUARD DBL REAR CTR CHNGRD DBL REAR WING RH CHNGRD CBL REAR CTR CHNGRD CBL REAR WING RH RHSNB 1/2-13X1 1/4 GR5 NUT HEX WHIZ 1/2-13 PLT CHAIN WELD 5/16 PROOF X 5 LINK CHAIN WELD 5/16 PROOF X 4 LINK U-BOLT WIRE ROPE CLP 3/16 GAL. AIRCRAFT CBL.3/16 7X7 GALV. AIRCRAFT CBL.3/16 7X7 GALV. SWAGE CLAMP, 3/16 CABLE CHAIN REV. DEFLECTOR REAR WING Complete assembly Alternate to C 9' Required 6' Required Or Use C 06/25/ P

58 Table of Contents Guards Rubber Front Part Number Index P /25/18

59 Table of Contents Part Number Index Section 4: Guards Guards Rubber Front Ref. Part No. Part Description Comments Revision dwg A D K D D K K C C C C C Drawing Image Number RUBBERGUARD FRONT * FORMED SUPPORT BAND RUBBERGUARD, FRT WING FLAT SUPPORT BAND FLAT SUPPORT BAND RUBBERGUARD FRT CNTR INNER RUBBERGUARD FRT CNTR OUTER RHSNB 1/2-13X1 1/4 GR5 NUT HEX WHIZ 1/2-13 PLT FRONT WING RUBBER GUARD RUBBER GUARD FRT CNTR RUBBER GUARD FRT CNTR OUT Complete assembly 06/25/ P

60 Table of Contents Guards Rubber Rear Part Number Index P /25/18

61 Table of Contents Part Number Index Section 4: Guards Guards Rubber Rear Ref. Part No. Part Description Comments Revision dwg A D D D D D K K K C C C C C C Drawing Image Number RUBBERGUARD REAR * FLAT SUPPORT BAND RUBBER GUARD FLAT BRKT. 28 1/2 MOUNT RBBRGRD CNTR LH MOUNT RBBRGRD CNTR RH MOUNT RBBRGRD WING REAR RUBBERGUARD REAR CNTR LH RUBBERGUARD REAR CNTR RH RUBBERGUARD REAR WING RHSNB 3/8-16X1 GR5 RHSNB 1/2-13X1 1/4 GR5 NUT HEX WHIZ 1/2-13 PLT NUT HEX WHIZ 3/8-16 PLT RUBBER GUARD REAR RUBBERGUARD REAR WING Complete assembly 06/25/ P

62 Table of Contents Driveline Center ( C) Comer Part Number Index P /25/18

63 Table of Contents Part Number Index Section 5: Drivelines Driveline Center ( C) Comer Ref. Part No. Part Description Comments Revision Dwg C Image No. DRVLN C FX CLTCH * COMER YOKE COMPLETE CO CROSS JOURNAL SET CO CIRCLIP CO GREASE NIPPLE COMER YOKE, OUTER COMER SHAFT, SPLINED COMER ROLL PIN, INNER TUBE CO INNER YOKE COMER CLUTCH, COMPLETE ASSY COMER TAPERED PIN SET 1 3/4 COMER SPRING COMER YOKE, FLANGED COMER BUSH RPBY COMER CLUTCH SUPPORT COMER INNER PLATE COMER INTERMEDIATE PLATE COMER PRESSURE PLATE COMER BOLT WITH NUT M10X100 Complete assembly 06/25/ P

64 Table of Contents Part Number Index Driveline Conv RPM ( C) Walterscheid (Applies to RCBM6610 only) P /25/18

65 Table of Contents Part Number Index Section 5: Drivelines Driveline Conv RPM ( C) Walterscheid (Applies to RCBM6610 only) Ref. Part No. Part Description Comments Revision Dwg C C N/A C C Drawing Image Number PTO 2500 CAT /8-21 * WS YOKE 1 3/4-20 SPL.I.C WS YOKE 1 3/8-21 SPL. AS WS CROSS & BEARING KIT 2500 WS INBOARD YOKE 2500 WS SPRING PIN 10 X 90 WS INNER PROFILE S4 WS PROFILE & SLEEVE W.A. WS INBOARD YOKE 2400 DECAL DANGER GUARD MISS PTO WALTERSCHEID SCREW WS BEARING RING - SC25 WS OUTER SHIELD TUBE OVAL DECAL DANGER PTO DRIVELINE WS INNER SHIELD TUBE RND. WS ASSY COLLAR KIT WS SHIELD CONE 7 RIB WS ZERK WS SUPPORT BEARING WS HEX BOLT M16 X 90 GR 8.8 WS LOCK NUT M16 SHIELD KIT, C WS REINFORCING COLLAR Complete assembly 06/25/ P

66 Table of Contents Part Number Index Driveline Conv. 540 RPM ( C) Walterscheid (Applies to RCB6610 only) P /25/18

67 Table of Contents Part Number Index Section 5: Drivelines Driveline Conv. 540 RPM ( C) Walterscheid (Applies to RCB6610 only) Ref. Part No. Part Description Comments Revision Dwg C C C C Drawing Image Number PTO 2500 X NO CLUTCH * WS YOKE 1 3/4-20 SPL.I.C WS YOKE 1 3/8"-6 SPL. ASG WS CROSS & BEARING KIT 2500 WS INBOARD YOKE 2500 WS SPRING PIN 10 X 90 WS INNER PROFILE 2400 WS PROFILE & SLEEVE W.A. WS INBOARD YOKE 2400 DECAL DANGER GUARD MISS PTO WALTERSCHEID SCREW WS BEARING RING - SC25 WS OUTER SHIELD TUBE RND. DECAL DANGER PTO DRIVELINE WS INNER SHIELD TUBE ROUND WS Q.D. PIN KIT WS SHIELD CONE 7 RIB WS ZERK WS SUPPORT BEARING WS HEX BOLT M16 X 90 GR 8.8 WS LOCK NUT M16 WS SHIELD CONE - 12 RIB SHIELD KIT, C WS REINFORCING COLLAR 06/25/ P

68 Table of Contents Part Number Index Driveline CV RPM ( C) Weasler (Applies to RCBM6610 only) P /25/18

69 Table of Contents Part Number Index Section 5: Drivelines Driveline CV RPM ( C) Weasler (Applies to RCBM6610 only) Ref. Part No. Part Description Comments Revision Dwg C Drawing Image Number DRVLN C CV * WE SSL/AUTO-LOK REPAIR KIT WE WWCV AUTO-LOK YOKE ASM WE AB8/AW25EBL CROSS KIT WE WWCV CENTER HOUSING WE YOKE&SHAFT ( SPLINE) WE GUARD REPAIR KIT WE OUTER GUARD WE INNER GUARD WE YOKE, TUBE & SLIP SLEEVE WE 55EBL CROSS KIT WE YOKE WE LOCK NUT WE BOLT X 3.00L GR8 WE JOINT&SHFT HALF ASM W/GUARD WE JOINT&TUBE HALF ASM W/GUARD WE GUARD SET Complete assembly 06/25/ P

70 Table of Contents Part Number Index Driveline CV RPM W/ Overrunning Clutch ( C) (Applies to RCBM6610 only) P /25/18

71 Table of Contents Part Number Index Section 5: Drivelines Driveline CV RPM W/ Overrunning Clutch ( C) (Applies to RCBM6610 only) Ref. Part No. Part Description Comments Revision Dwg C Drawing Image Number DRVLN C CV ORCLTCH * WE SSL/AUTO-LOK REPAIR KIT WE WWCV AUTO-LOK YOKE ASM WE AB8/AW25EBL CROSS KIT WE WWCV CENTER HOUSING WE YOKE&SHAFT ( SPLINE) WE OUTER GUARD WE GUARD REPAIR KIT WE SAFETY SIGN WE SAFETY SIGN WE INNER GUARD WE YOKE, TUBE & SLIP SLEEVE WE 55EBL CROSS KIT WE OVERRUNNING THRST CLTCH ASM Complete assembly 06/25/ P

72 Table of Contents Part Number Index Driveline CV RPM ( C) (Applies to RCBM6610 only) P /25/18

73 Table of Contents Part Number Index Section 5: Drivelines Driveline CV RPM ( C) (Applies to RCBM6610 only) Ref. Part No. Part Description Comments Revision Dwg C Drawing Image Number DRVLN C CV * WE SSL/AUTO-LOK REPAIR KIT WE WWCV AUTO-LOK YOKE ASM WE AB8/AW25EBL CROSS KIT WE WWCV CENTER HOUSING WE YOKE&SHAFT ( SPLINE) WE GUARD REPAIR KIT WE OUTER GUARD WE INNER GUARD WE YOKE, TUBE & SLIP SLEEVE WE 55EBL CROSS KIT WE YOKE WE LOCK NUT WE BOLT X 3.00L GR8 WE JOINT&SHFT HALF ASM W/GUARD WE JOINT&TUBE HALF ASM W/GUARD Complete assembly 06/25/ P

74 Table of Contents Part Number Index Driveline CV 540 RPM ( C) Weasler (Applies to RCB6610 only) P /25/18

75 Table of Contents Part Number Index Section 5: Drivelines Driveline CV 540 RPM ( C) Weasler (Applies to RCB6610 only) Ref. Part No. Part Description Comments Revision Dwg C Drawing Image Number DRVLN C CV * WE SSL/AUTO-LOK REPAIR KIT WE WWCV AUTO-LOK YOKE ASM WE AB8/AW25EBL CROSS KIT WE WWCV CENTER HOUSING WE YOKE&SHAFT ( SPLINE) WE GUARD REPAIR KIT W/ CHAINS WE OUTER GUARD WE INNER GUARD WE YOKE, TUBE & SLIP SLEEVE WE 55EBL CROSS KIT WE YOKE WE LOCK NUT WE BOLT X 3.00L GR8 WE JOINT&SHFT HALF ASM W/GUARD WE JOINT&TUBE HALF ASM W/GUARD WE GUARD SET Complete assembly 06/25/ P

76 Table of Contents Driveline Wing ( C) Comer Part Number Index P /25/18

77 Table of Contents Part Number Index Section 5: Drivelines Driveline Wing ( C) Comer Ref. Part No. Part Description Comments Revision Dwg Image No C DRVLN C FX CLTCH * COMER YOKE COMPLETE CO CROSS JOURNAL SET N/A CO GREASE NIPPLE COMER YOKE OUTER COMER OUTER TUBE ROLL PIN CO COMPLETE OUTER TUBE W/LABEL COMER INNER TUBE COMER ROLL PIN FOR INNER TUBE COMER INNER YOKE COMER CLUTCH, DISC COMPLETE COMER RETAINING COLLER INNER COMER BOLT COMER RETAINING COLLER INNER CO COMPLETE GUARD W/MANUAL COMER TAPERED PIN SET 1 3/ COMER SPRING COMER YOKE, FLANGED COMER BUSH RPBY COMER CLUTCH SUPPORT COMER INNER PLATE COMER INTERMEDIATE PLATE COMER PRESSURE PLATE COMER BOLT WITH NUT M10X CO HALF FEMALE GUARD CO HALF MALE GUARD CO HALF FEMALE SHFT W/GUARDING CO HALF MALE SHAFT W/GUARDING COMER DANGER LABEL OUTER TUBE COMER DANGER LABEL GUARD OUTER COMER CAP OUTER TUBE, PLASTIC COMER INNER CAP CO LABEL W/CUSTOMER CODE Complete assembly available only in cross journal set (#2) 06/25/ P

78 Table of Contents Gearbox ( C) Comer Part Number Index (Applies to RCBM6610 only) P /25/18

79 Table of Contents Part Number Index Section 6: Gearboxes (1000) Gearbox ( C) Comer (Applies to RCBM6610 only) Ref. Part No. Part Description Comments Revision Dwg Drawing Image Number C GBOX RCM :1.21 CCW * U CO HOUSING U CO CROWN GEAR Z22 M CO BEARING RTA CO OIL SEAL 45 X 85 X 10 U CO INPUT SHAFT 1 3/4" CO SNAP RING UNI CO SHIM CO SNAP RING 50 UNI7435 U CO CASTLE NUT CO SHIM 50.3X CO BEARING CO SEAL PROTECTOR CO OIL SEAL 60X110X CO BEARING U CO OUTPUT SHAFT CO COTTER PIN B 5X CO CAP CO BLANK WASHER CO SHIM 45.3X CO SHIM 40.3 X 61.7 X 1 U CO TOP COVER CO BOLT M8X22 HHB C COMER U DIPSTICK CO OIL PLUG 3/ CO COTTER PIN B6X70 SLD-SPRTLY CO CASTLE NUT M36X3 U CO CROWN GEAR Z18 M7.8 * Notes: Oil Type 80-90W Capacity 10 Pints Complete assembly 06/25/ P

80 Table of Contents Gearbox ( C) Part Number Index (Applies to RCBM6610 only) P /25/18

81 Table of Contents Part Number Index Section 6: Gearboxes (1000) Gearbox ( C) (Applies to RCBM6610 only) Ref. Part No. Part Description Comments Revision dwg33989 Drawing Image Number C GBOX RC :1 STD * U CO HOUSING U CO GEAR PINION Z19 M CO BRG TAPPERED CO OIL SEAL 45 X 85 X 10 SL U CO INPUT SHAFT 1 3/4" CO SNAP RING UNI 7437 A COMER SHIM KIT CO SNAP RING 50 UNI7435 U CO CASTLE NUT A COMER SHIM KIT CO BRG TAPPERED CO SEAL PROTECTOR CO OIL SEAL 60X110X12 SL CO BRG TAPPERED U CO OUTPUT SHAFT CO COTTER PIN B 5X CO CAP CO BLANK WASHER CO SHIM 45.3X CO SHIM 40.3 X 61.7 X 1 U CO TOP COVER CO BOLT M8X22 HHB CO PLUG 1/2" GAS CO OIL PLUG 3/ CO CASTLE NUT M36X3 U CO GEAR CROWN Z22 M CO COTTER PIN B6X70 SLD-SPRTLY C COMER U DIPSTICK 06/25/ P

82 Table of Contents Gearbox ( C) Part Number Index (Applies to RCBM6610 only) P /25/18

83 Table of Contents Part Number Index Section 6: Gearboxes (1000) Gearbox ( C) (Applies to RCBM6610 only) Ref. Part No. Part Description Comments Revision dwg35002 Drawing Image Number C GBOX RC :1 REV * U CO HOUSING U CO GEAR PINION Z19 M CO BRG TAPPERED CO OIL SEAL 45 X 85 X 10 SL U CO INPUT SHAFT 1 3/4" CO SNAP RING UNI 7437 A COMER SHIM KIT CO SNAP RING 50 UNI7435 U CO CASTLE NUT A COMER SHIM KIT CO BRG TAPPERED CO SEAL PROTECTOR CO OIL SEAL 60X110X12 SL CO BRG TAPPERED U CO OUTPUT SHAFT CO COTTER PIN B 5X CO CAP CO BLANK WASHER CO SHIM 45.3X CO SHIM 40.3 X 61.7 X 1 U CO TOP COVER CO BOLT M8X22 HHB CO PLUG 1/2" GAS CO OIL PLUG 3/ CO CASTLE NUT M36X3 U CO GEAR CROWN Z22 M CO COTTER PIN B6X70 SLD-SPRTLY C COMER U DIPSTICK 06/25/ P

84 Table of Contents Gearbox 1000 RPM ( C) Part Number Index (Applies to RCBM6610 only) P /25/18

85 Table of Contents Part Number Index Section 6: Gearboxes (1000) Gearbox 1000 RPM ( C) (Applies to RCBM6610 only) Ref. Part No. Part Description Comments Revision dwg24726 Drawing Image Number C GBOX RCM :1.21 CW * U CO HOUSING U CO CROWN GEAR Z22 M CO BEARING RTA CO OIL SEAL 45 X 85 X 10 U CO INPUT SHAFT 1 3/4" CO SNAP RING UNI 7437 A COMER SHIM KIT CO SNAP RING 50 UNI7435 U CO CASTLE NUT A COMER SHIM KIT CO BEARING CO SEAL PROTECTOR CO OIL SEAL 60X110X CO BEARING U CO OUTPUT SHAFT CO COTTER PIN B 5X CO CAP CO BLANK WASHER CO SHIM 45.3X CO SHIM 40.3 X 61.7 X 1 U CO COVER CO BOLT M8X22 HHB C COMER U OIL PLUG CO OIL PLUG 3/ CO COTTER PIN B6X70 SLD-SPRTLY CO CASTLE NUT M36X3 U CO CROWN GEAR Z18 M7.8 * Notes: Oil Type 80-90W Capacity 10 Pints 06/25/ P

86 Table of Contents Part Number Index Gearbox Divider 1000 RPM ( C) Comer (Applies to RCBM6610 only) P /25/18

87 Table of Contents Part Number Index Section 6: Gearboxes (1000) Gearbox Divider 1000 RPM ( C) Comer (Applies to RCBM6610 only) Ref. Part No. Part Description Comments Revision Dwg C N/A N/A C A Drawing Image Number DIV BOX COMER 1000RPM 1 3/4-20 * CO BOLT M10 X TOP COVER PLATE CO BEARING RTA25 CO SNAP RING CO OIL SEAL 45 X 85 X 10 CO CASING CO SHIM 84.7 RPBY A CO SHAFT 1" 3/4 Z20 CO SHAFT 1" 3/4 Z20 RPBY A CO PLUG 3/8 GAS COMER DIPSTICK CO TRIAD GEAR Z20-Z24-Z24 M6.5 * Notes: Oil Type 80-90W Capacity 5.5 Pints Complete assembly Contains 2 of gear #8 and 1 of gear #11 06/25/ P

88 Table of Contents Part Number Index Gearbox Divider 1000 RPM ( C) ITG (Applies to RCBM6610 only) P /25/18

89 Table of Contents Part Number Index Section 6: Gearboxes (1000) Gearbox Divider 1000 RPM ( C) ITG (Applies to RCBM6610 only) Ref. Part No. Part Description Comments Revision Dwg C C B Drawing Image Number DIV BOX 1000RPM 1 3/4-20 * ITG HOUSING WASHER SPRING LOCK M10 PLT ITG M10 X 1.5 X 30 CAP SCREW ITG INPUT CAP SPLITTER BOX ITG INPUT SHAFT ITG INPUT SHAFT OIL SEAL ITG BRG ASSEMBLY ITG INPUT CAP GASKET 0.10MM ITG INPUT CAP GASKET 0.25MM ITG IN & OUT CAP GASKET 0.45MM ITG HORIZONTAL HUB CAP ITG OUTPUT SEAL 58X95X10 THK ITG OUTPUT SHAFT ITG SPACER ITG SHIM 0.3 ITG SHIM 0.4 ITG SHIM TOOTH GEAR ITG 23 TOOTH GEAR ITG BRG ADJ. NUT ITG COTTER PIN ITG SEALING WASHER ITG DRAIN PLUG ITG M10X1.5 DIP STICK BREATHER * Notes: Oil Type 80-90W Capacity 5.5 Pints Complete assembly 06/25/ P

90 Table of Contents Gearbox ( C) Part Number Index (Applies to RCB6610 only) P /25/18

91 Table of Contents Part Number Index Section 6: Gearboxes (540) Gearbox ( C) (Applies to RCB6610 only) Ref. Part No. Part Description Comments Revision dwg33987 Drawing Image Number C GBOX RC60 1:1.60 STD * U CO HOUSING U CO GEAR CROWN Z24 M CO BRG TAPPERED CO OIL SEAL 45 X 85 X 10 SL U CO INPUT SHAFT 1 3/4" CO SNAP RING UNI 7437 A COMER SHIM KIT CO SNAP RING 50 UNI7435 U CO CASTLE NUT A COMER SHIM KIT CO BRG TAPPERED CO SEAL PROTECTOR CO OIL SEAL 60X110X12 SL CO BRG TAPPERED U CO OUTPUT SHAFT CO COTTER PIN B 5X CO CAP CO BLANK WASHER CO SHIM 45.3X CO SHIM 40.3 X 61.7 X 1 U CO TOP COVER CO BOLT M8X22 HHB CO PLUG 1/2" GAS CO OIL PLUG 3/ CO CASTLE NUT M36X3 U CO GEAR PINION Z15 M CO COTTER PIN B6X70 SLD-SPRTLY C COMER U DIPSTICK 06/25/ P

92 Table of Contents Gearbox ( C) Part Number Index (Applies to RCB6610 only) P /25/18

93 Table of Contents Part Number Index Section 6: Gearboxes (540) Gearbox ( C) (Applies to RCB6610 only) Ref. Part No. Part Description Comments Revision dwg33988 Drawing Image Number C GBOX RC60 1:1.60 REV * U CO HOUSING U CO GEAR CROWN Z24 M CO BRG TAPPERED CO OIL SEAL 45 X 85 X 10 SL U CO INPUT SHAFT 1 3/4" CO SNAP RING UNI 7437 A COMER SHIM KIT CO SNAP RING 50 UNI7435 U CO CASTLE NUT A COMER SHIM KIT CO BRG TAPPERED CO SEAL PROTECTOR CO OIL SEAL 60X110X12 SL CO BRG TAPPERED U CO OUTPUT SHAFT CO COTTER PIN B 5X CO CAP CO BLANK WASHER CO SHIM 45.3X CO SHIM 40.3 X 61.7 X 1 U CO TOP COVER CO BOLT M8X22 HHB CO PLUG 1/2" GAS CO OIL PLUG 3/ CO CASTLE NUT M36X3 U CO GEAR PINION Z15 M CO COTTER PIN B6X70 SLD-SPRTLY C COMER U DIPSTICK 06/25/ P

94 Table of Contents Part Number Index Gearbox Divider 540 RPM ( C) Comer (Applies to RCB6610 only) P /25/18

95 Table of Contents Part Number Index Section 6: Gearboxes (540) Gearbox Divider 540 RPM ( C) Comer (Applies to RCB6610 only) Ref. Part No. Part Description Comments Revision Dwg C A N/A N/A C A Drawing Image Number DIV BOX COMER 540RPM 1 3/4-20 * CO BOLT M10 X TOP COVER PLATE CO BEARING RTA25 CO SNAP RING CO OIL SEAL 45 X 85 X 10 CO CASING COMER SHIM KIT RPBY A CO SHAFT 1" 3/4 Z20 CO SHAFT 1" 3/4 Z20 RPBY A CO PLUG 3/8 GAS COMER DIPSTICK CO TRIAD GEAR Z20-Z20-Z24 M6.5 * Notes: Oil Type 80-90W Capacity 5.5 Pints Complete assembly Contains 2 of gear #8 and 1 of gear #11 06/25/ P

96 Table of Contents Part Number Index Gearbox Divider 540 RPM ( C) ITG (Applies to RCB6610 only) P /25/18

97 Table of Contents Part Number Index Section 6: Gearboxes (540) Gearbox Divider 540 RPM ( C) ITG (Applies to RCB6610 only) Ref. Part No. Part Description Comments Revision Dwg C C B Drawing Image Number DIV BOX 540RPM 1 3/4-20 * ITG HOUSING WASHER SPRING LOCK M10 PLT ITG M10 X 1.5 X 30 CAP SCREW ITG INPUT CAP SPLITTER BOX ITG INPUT SHAFT ITG INPUT SHAFT OIL SEAL ITG BRG ASSEMBLY ITG INPUT CAP GASKET 0.10MM ITG INPUT CAP GASKET 0.25MM ITG IN & OUT CAP GASKET 0.45MM ITG HORIZONTAL HUB CAP ITG OUTPUT SEAL 58X95X10 THK ITG OUTPUT SHAFT ITG SPACER ITG SHIM 0.3 ITG SHIM 0.4 ITG SHIM 0.5 ITG 23 TOOTH GEAR 19 TOOTH GEAR ITG BRG ADJ. NUT ITG COTTER PIN ITG SEALING WASHER ITG DRAIN PLUG ITG M10X1.5 DIP STICK BREATHER * Notes: Oil Type 80-90W Capacity 5.5 Pints Complete assembly 06/25/ P

98 Table of Contents Hydraulic Cylinder ( C) 3.5 X 8 Part Number Index P /25/18

99 Table of Contents Part Number Index Section 7: Hydraulics Hydraulic Cylinder ( C) 3.5 X 8 Ref. Part No. Part Description Comments Revision dwg C C C N/A N/A N/A N/A N/A N/A N/A C Drawing Image Number CYL 3.5X8X1.25 ROD (TIE ROD) * NUT HEX 5/8-18 PLT MON TIE ROD NUT (LONG) MON PISTON NUT MON R-CLIP RETAINERS LION PIN SCREW SET SH 3/8-16X3/8 TYPE C LION PLUG 3/4-16UNF SOCKET HD MON ROD SEAL LION B.U. WASHER MON END CAP O-RING SEAL WIPER ROD MON TIE ROD PISTON, 3.5 CYLINDER LION CYL. TUBE 3.5 X 8 LION ROD CLEVIS 1 1/4 (1PIN) LION CLEVIS CAP 3.5 ORB LION ROD CAP 3.5 X 1 1/4 ORB LION ROD 1.25 DIA. ASAE 8 PTFE EXPANDER 3.5 O RING WEAR RING WASHER FLAT 5/8 SAE PLT KIT, 3.5X8X1.5 CYLINDER SEAL Only in Seal Kit Item 23 Only in Seal Kit Item 23 Only in Seal Kit Item 23 Only in Seal Kit Item 23 Only in Seal Kit Item 23 Only in Seal Kit Item 23 Only in Seal Kit Item 23 06/25/ P

100 Table of Contents Part Number Index Hydraulic Cylinder Rephase ( C) Red Lion 3.5 X P /25/18

101 Table of Contents Part Number Index Section 7: Hydraulics Hydraulic Cylinder Rephase ( C) Red Lion 3.5 X 8 Ref. Part No. Part Description Comments Revision dwg C C N/A N/A N/A N/A N/A N/A Drawing Image Number CYL REP 3.5X8X1.25 ROD (TIE) * NUT HEX 5/8-18 PLT MON PISTON NUT MON NYLON THREAD PROTECTOR LION PLUG 3/4-16UNF SOCKET HD MON SEAL PTFE PISTN RING 3-1/2 MON SEAL HALLITE 605 ROD 1-1/4 MON SEAL DUAL 3.50 MON O RING 151 3X3-3/16 DUR90 MON SEAL WIPER ROD METAL MON WEAR RNG GFN PISTON, 3.5 CYLINDER MON TUBE WELDT TP LION TIE ROD 5/8 X 8 LION ROD CLEVIS 1 1/4 (1PIN) LION CLEVIS CAP 3.5 ORB LION ROD CAP 3.5 X 1 1/4 ORB LION ROD 1.25 DIA. ASAE 8 MON PIN KIT 1.00C/W COTTER PIN KIT, 3.5X8X1.5 CYLINDER SEAL Order Seal Kit Item #19 Order Seal Kit Item #19 Order Seal Kit Item #19 Order Seal Kit Item #19 Order Seal Kit Item #19 Order Seal Kit Item #19 06/25/ P

102 Table of Contents Part Number Index Hydraulic Cylinder Rephase ( C) Red Lion 3.25 X P /25/18

103 Table of Contents Part Number Index Section 7: Hydraulics Hydraulic Cylinder Rephase ( C) Red Lion 3.25 X 8 Ref. Part No. Part Description Comments Revision Dwg C C N/A N/A N/A N/A N/A N/A Drawing Image Number CYL REP 3.25X8X1.25 ROD (TIE) * NUT HEX 5/8-18 PLT MON PISTON NUT MON NYLON THREAD PROTECTOR LION PLUG 3/4-16UNF SOCKET HD MON SEAL PTFE PISTN RING 3-1/4 MON SEAL HALLITE 605 ROD 1-1/4 MON O RING /16X3 DUR90 MON SEAL WIPER ROD METAL MON SEAL DUAL 3.25 MON WEAR RNG GFN MON PISTON TP MON TUBE WELDT TP LION TIE ROD 5/8 X 8 LION ROD CLEVIS 1 1/4 (1PIN) MON CLEVIS CAP /4ORB-1.0 MON ROD CAP /4ORB LION ROD 1.25 DIA. ASAE 8 MON PIN KIT 1.00C/W COTTER PIN MON SEAL KIT 32TP Complete assembly Order Seal Kit Item #19 Order Seal Kit Item #19 Order Seal Kit Item #19 Order Seal Kit Item #19 Order Seal Kit Item #19 Order Seal Kit Item #19 06/25/ P

104 Table of Contents Part Number Index Hydraulic Cylinders W/ Mounting Components P /25/18

105 Table of Contents Part Number Index Section 7: Hydraulics Hydraulic Cylinders W/ Mounting Components Ref. Part No. Part Description Comments Revision dwg H S C C C C C C C C C C C C C Drawing Image Number MOUNT TANDEM ADJ TRANSPORT LOCK, DBL ACTING HHCS 1/2-13X1 3/4 GR5 EYE BOLT 1-8X6 1/2 LG PLT SP NUT HEX JAM 1-8 PLT NUT HEX WHIZ 1/2-13 PLT WASHER LOCK SPRING 1 PLT WASHER FLAT 1 SAE PIN COTTER 3/16 X 1 1/2 PLT PIN CLEVIS 1 X 4 11/16 USABLE CYL 3.5X8X1.25 ROD (TIE ROD) STRK CNTRL SPCRS TO 1.50 CYL REP 3.5X8X1.25 ROD (TIE) CYL REP 3.25X8X1.25 ROD (TIE) PIN HTCH.75X6.25 USBL W/PIN 06/25/ P

106 Table of Contents Hydraulic Plumbing Components Part Number Index P /25/18

107 Table of Contents Part Number Index Section 7: Hydraulics Hydraulic Plumbing Components Ref. Part No. Part Description Comments Revision Dwg D S S C C C C C C C C C C C C C C C C C C C C C C C Image No. BOLT ON HOSE HOLDER HG PAIR - BLACK MORB-FORB HG PAIR - RED MORB-FORB NUT HEX 3/8-16 PLT WASHER FLAT 3/8 SAE PLT WASHER LOCK SPRING 3/8 PLT U-BOLT 3/8-16 X 4 1/32 X 3 3/4 CYL 3.5X8X1.25 ROD (TIE ROD) CYL REP 3.5X8X1.25 ROD (TIE) CYL REP 3.25X8X1.25 ROD (TIE) EL 3/4MJIC 3/4MORB AD 3/4MORB 3/4MJIC HH3/8R /4FJIC 3/4MORB HH3/8R /4FJIC 3/4MORB HH1/4R /16FJIC HH3/8R /16FJIC 3/4MORB CP 3/4FORB MALE QD POPPET TYPE HH3/8R /4MORB 3/4FJIC HH3/8R /4MORB 3/4FJIC HG HANDLE - BLACK EXT HG HANDLE - RED RET HG HANDLE - BLACK RET HG HANDLE - RED EXT AD 3/4MORB 3/4FORB (HG) OREL 1/16 9/16MJIC 3/4MORB HH3/8R /4FJIC S/N D001073N+ S/N D001072N- S/N D001073N+ S/N D001072N- S/N D001073N+ S/N D001072N- 06/25/ P

108 Decals Table of Contents Part Number Index P /25/18