2720/12720 PARTS MANUAL 72A SECTION FLEX WING ROTARY MOWER

Size: px

Start display at page:

Download "2720/12720 PARTS MANUAL 72A SECTION FLEX WING ROTARY MOWER"

Lydia Carroll
5 years ago
Views:

0/0 This Manual applies to models 0 and 0 that use a blade pan which measures. blade hole center to blade hole center. Also blades measure 8. from hole center to blade tip.

1 0/0 This Manual applies to models 0 and 0 that use a blade pan which measures. blade hole center to blade hole center. Also blades measure 8. from hole center to blade tip. See Section if these dimensions are different. Published 08/ S MANUAL SECTION FLEX WING ROTARY MOWER A An Operator s Manual was shipped with the equipment. The Operator s Manual is an integral part of the safe operation of this machine and must be maintained with the unit at all times. READ, UNDERSTAND, and FOLLOW the Safety and Operation Instructions contained in this manual before operating the equipment. If the Operator s Manual is not with the equipment, contact your dealer or Bush Hog to obtain a copy before operating the equipment. Important Operating and Safety Instructions are found in the Mower Safety Video that can be instantly accessed on the internet at:

2 BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL 0 FLEX-WING CUTTERS 0 RPM 0 FLEX-WING CUTTERS 000 RPM 0 FLEX WING SHREDDER _ 000 RPM THIS MANUAL APPLIES TO MODELS SERIAL NO S. -00 AND ABOVE ALPHABETICAL INDEX CONTENTS PAGE Axle Arms...A-- Axle Assembly...A-- Baffle Kit...A-- Bands, Rear...A--, A-- Belting, Front...A-- Chains, Front...A-- Rear...A-- Safety Tow...A--, A-- Decals...A-8- Deck Assembly, Center 0 & 0...A-- Deck Assembly, Center 0 Shredder...A--, A-- Right Hand Wing 0 & 0...A-- Right Hand Wing 0 Shredder...A-- Left Hand Wing, 0 & 0...A-- Left Hand Wing, 0 Shredder...A-- Driveshaft Assemblies...A-- through A-- Gearbox Assemblies...A-- through A-- Hitch Assemblies...A-- Hub Assemblies...A-- Hydraulic Cylinders...A-- Hydraulics....A-- Jackstand...A--, A-- Leveling Rod...A--, A-- Shield Assembly, Center...A-- Wing...A-- Shredder Kit...A-- Tongue...A--, A-- Wheels and Tires...A-- through A--

3 BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL CENTER FRAME ASSEMBLY MODELS 0 & 0 0. center to center Blade measures 8. center of blade hole to blade tip. Ref. Part Description Qty. No. No. Req d Center Deck (Rings) w/decals D9 Decal, Danger / Important D Decal / Warning Decal 0 RPM A D8 Decal, 000RPM (Overlay) 9 Decal, Important - Slip Clutch D Decal, Blade Rotation CCW D Decal, Important - Transport D Decal, Danger 8 D Decal, Danger 9 D Decal, Danger 0 D Decal, Warning Important D Decal, Danger D8 Decal, Lubrication D9 Decal, Gen. Bush Hog Parts Skid Carriage Bolt / x -/ Gr Flatwasher Flatwasher / Lockwasher / Hex Nut / Pin, Transport Latch BH Presto Pin 0090 Hinge Rod Hinge Connector Capscrew / x -/ Gr Locknut, Flanged / Ref. Part Description Qty. No. No. Req d Locknut Flanged / Capscrew /8 x -/ Gr. 8 0 Blade Bolt Kit 9 BH Blade, CCW Rotation Pan Assy Gearbox Assy.Center 0 RPM 0089 Gearbox Assy. Center 000 RPM 0 Gearbox Assy. Transfer 0 RPM (Comer) 009 Gearbox Assy. Transfer 0 RPM (B & P) 0 Gearbox Assy. Transfer 000 RPM (Comer) 009 Gearbox Assy. Transfer 000 RPM (B & P) 0088 Driveshaft, Center Spring Washer 08 Castle Nut M x 09 Cotter Pin M x Wing Latch Capscrew /8 x Gr Flatwasher / Locknut / Capscrew / x Gr Locknut / 009 Transport Latch 0098 Pin, Transport 00 Cotter Pin / x -/ 0098 Pin D8 Decal, Danger - Multilingual A--

4 BUSH HOG / LAND MAINTENANCE REPAIR S MANUAL CENTER FRAME ASSEMBLY MODELS 0 SHREDDER A--

5 BUSH HOG / LAND MAINTENANCE REPAIR S MANUAL CENTER FRAME ASSEMBLY MODELS 0 SHREDDER Ref. Part Description Qty. No. No. Req d Center Deck (Rings) w/decals D9 Decal, Danger / Important D Decal / Warning Decal 0 RPM A D8 Decal, 000RPM (Overlay) 9 Decal, Important - Slip Clutch D Decal, Blade Rotation CCW D Decal, Important - Transport D Decal, Danger 8 D Decal, Danger 9 D Decal, Danger 0 D Decal, Warning Important D Decal, Danger D8 Decal, Lubrication D9 Decal, Gen. Bush Hog Parts Skid Carriage Bolt / x -/ Gr Flatwasher Flatwasher / Lockwasher / Hex Nut / Pin, Transport Latch BH Presto Pin 0090 Hinge Rod Hinge Connector Capscrew / x -/ Gr Locknut, Flanged / Locknut Flanged / Capscrew /8 x -/ Gr Wing Latch Capscrew / x Gr Locknut / Capscrew /8 x Gr Flatwasher / Locknut / Pin, Transport 0098 Pin Cotter Pin / x -/ Cotter Pin / x -/ 8 8BH Slotted Nut -/ Pivot Bushing 0 000BH Blade, Straight - Double Edge BH Blade, Uplift 90 Blade Bolt 0090 Blade Bar Spring Washer 09 Cotter Pin M x 0 08 Castle Nut M x 009 Transport Latch Center Gearbox 000 RPM 9 0 Gearbox, Transfer 000 RPM (Comer) 009 Gearbox, Transfer 000 RPM (B & P) Center Drive Line D8 Decal, Danger - Multilingual A--

6 BUSH HOG / LAND MAINTENANCE REPAIR S MANUAL RIGHT HAND WING FRAME ASSEMBLY MODELS 0 & 0. center to center Blade measures 8. center of blade hole to blade tip. Ref. Part Description Qty. No. No. Req d Wing Frame (Rings) w/decals 0000 Front Skid R.H Rear Skid R.H. Plow Bolt /8 x -/ Flatwasher / Lockwasher / Hex Nut / Bush Hog Decal Capscrew /8 x Lockwasher / Flatwasher 0098 Pin Assembly 0099 Push Over Assy Capscrew / x -/ Gr Locknut, Flanged / Ref. Part Description Qty. No. No. Req d Cotter Pin / x -/ 99 Wing Lift Cylinder 8 9 Pin Cotter Pin / x -/ 0 0 Bush Hog Blade Kit BH Blade - Uplift CCW 000 Blade Pan Weldment 08 Castle Nut M x Spring Washer 09 Cotter Pin M x 0 00 Reflector, Amber D Decal, Blade Rotation CCW 8 D Decal, Danger (Thrown Object) Gearbox Assy. R.H. 0 RPM Gearbox Assy. R.H. 000 RPM 0 D Decal, Danger (Missing Guard) A--

7 BUSH HOG / LAND MAINTENANCE REPAIR S MANUAL LEFT HAND WING FRAME ASSEMBLY MODELS 0 & 0. center to center Blade measures 8. center of blade hole to blade tip. Ref. Part Description Qty. No. No. Req d Wing Frame (Rings) w/decals Front Skid L.H Rear Skid L.H. Plow Bolt /8 x -/ Flatwasher / Lockwasher / Hex Nut / Bush Hog Decal Capscrew /8 x Lockwasher / Flatwasher 0098 Pin Assembly 0099 Push Over Assy Capscrew / x -/ Gr Locknut, Flanged / Ref. Part Description Qty. No. No. Req d Cotter Pin / x -/ 99 Wing Lift Cylinder 8 9 Pin Cotter Pin / x -/ 0 0 Bush Hog Blade Kit 08 Blade - Uplift CW 000 Blade Pan Weldment 08 Castle Nut M x Spring Washer 09 Cotter Pin M x 0 00 Reflector, Amber D Decal, Blade Rotation CW 8 D Decal, Danger (Thrown Object) Gearbox Assy. L.H. 0 RPM Gearbox Assy. L.H. 000 RPM 0 D Decal, Danger (Missing Guard) A--

8 BUSH HOG / LAND MAINTENANCE REPAIR S MANUAL RIGHT HAND WING FRAME ASSEMBLY MODELS 0 SHREDDER Ref. Part Description Qty. No. No. Req d Wing Frame (Rings) w/decals 0000 Front Skid R.H Rear Skid R.H. Plow Bolt /8 x -/ Flatwasher / Lockwasher / Hex Nut / Bush Hog Decal Capscrew /8 x Lockwasher / Flatwasher 0098 Pin Assembly 0099 Push Over Assy Capscrew / x -/ Gr Locknut, Flanged / Cotter Pin / x -/ 99 Hydraulic Cylinder, Wing Lift Ref. Part Description Qty. No. No. Req d. 8 9 Pin Cotter Pin / x -/ Cotter Pin / x -/ 8BH Slotted Nut-/8 80 Pivot Bushing 000BH Blade Straight Double Edged 0090 Blade Bar Assembly BH Blade, Uplift CCW 90 Blade Bolt 00 Reflector, Amber 8 D Decal, Blade Rotation-CCW 9 D Decal, Danger (Thrown Objects) 0 08 Castle Nut M x 09 Cotter Pin M x 0 Spring Washer Gearbox Assy. 000 RPM D Decal, Danger (Missing Guard) A--

9 BUSH HOG / LAND MAINTENANCE REPAIR S MANUAL LEFT HAND WING FRAME ASSEMBLY MODELS 0 SHREDDER Ref. Part Description Qty. No. No. Req d Wing Frame (Rings) w/decals Front Skid L.H Rear Skid L.H. Plow Bolt /8 x -/ Flatwasher / Lockwasher / Hex Nut / Bush Hog Decal Capscrew /8 x Lockwasher / Flatwasher 0098 Pin Assembly 0099 Push Over Assy Capscrew / x -/ Gr Locknut, Flanged / Cotter Pin / x -/ 99 Hydraulic Cylinder, Wing Lift Ref. Part Description Qty. No. No. Req d. 8 9 Pin Cotter Pin / x -/ Cotter Pin / x -/ 8BH Slotted Nut-/8 80 Pivot Bushing 000BH Blade Straight Double Edged 0090 Blade Bar Assembly 90 Blade, Uplift CW 90 Blade Bolt 00 Reflector, Amber 8 D Decal, Blade Rotation-CW 9 D Decal, Danger (Thrown Objects) 0 08 Castle Nut M x 09 Cotter Pin M x 0 Spring Washer Gearbox Assy. 000 RPM D Decal, Danger (Missing Guard) A--

11 BUSH HOG / LAND MAINTENANCE REPAIR S MANUAL FRONT CHAIN ASSEMBLY For Model 0 & 0,0,, 8 9 0,0,,,0,,,0,, 0 9 8,0, 009 Chain Assembly, Center Front, Single 009 Chain Assembly, Center Front, Double 000 Chain Assembly, Center Side, Single 000 Chain Assembly, Center Side, Double 0099 Chain Assembly, Inner Wing, Single Chain Assembly, Inner Wing, Double Chain Assembly, Outer Wing, Single 0099 Chain Assembly, Outer Wing, Double 0099 Support, Center Front 00 A/R Chain, Link, Single 00 A/R Chain, Link, Double 000 A/R Spiral Pin /8 x -/ Pin, Front Center Support, Center Side Pin, Center Side 00 Chain, Link 0099 Support, Inner Wing 0099 Pin, Inner Wing Support, Outer Wing 0099 Pin, Outer Wing Chain Baffle Assembly, R.H. Front (Not Shown) 0098 Chain Baffle Assembly, L.H. Front 0098 Chain Bar, Short 8 BH Carriage Bolt /8 x -/ Spacer / 0 0 Flatwasher / Locknut /8 Carriage Bolt /8 x -/ 0 Lockwasher /8 0 Hex Nut /8 8 0 Carriage Bolt /8 x -/ A--

12 BUSH HOG / LAND MAINTENANCE REPAIR S MANUAL REAR CHAIN ASSEMBLY For Models 0 & 0,,,,,, 0 8,,, 9 0,,, 0,, 8,9,, 8,,, Center Rear Chains, Single Center Rear Chains, Double R.H. Chain Assembly, Single (shown) R.H. Chain Assembly, Double L.H. Chain Assembly, Single L.H. Chain Assembly, Double 0099 Short Wing Chain Assy., Single 0099 Short Wing Chain Assy., Double Inside Wing Chains, Single Inside Wing Chains, Double 0099 Rear Wing Chains, Single 0099 Rear Wing Chains, Double 009 Chain Bar Assy., R.H. (shown) 000 Chain Bar Assy., L.H. 008 Outside Support Left Outside Support Left Inside Support Rear Center Support 008 Right Inside Support 0089 Right Outside Support Chain Rod, Spiral Pin /8 x -/ 0098 Chain, Link, Single 00 Chain, Link, Double 00 Chain, Link, Single 00 Chain, Link, Double 0089 Chain, Link, Single 00 Chain, Link, Double Retaining Rod R.H. Bracket Weldment 0099 L.H. Bracket Weldment Short Wing Chain Support 0099 Short Wing Pin 0099 Inside Wing Chain Support 0099 Inside Wing Pin 00 Chain, Link, Single Chain, 9 Link, Double 0099 Chain Support, Rear Wing 0099 Rear Wing Pin 008 Chain Bar 8 Capscrew /8 x -/ Spacer / 0 Carriage Bolt /8 x -/ 0 Flatwasher /8 0 Lockwasher /8 0 Hex Nut / Locknut /8 8 0 Carriage Bolt /8 x -/ A--

13 BUSH HOG / LAND MAINTENANCE REPAIR S MANUAL FRONT BELTING ASSEMBLY Model 0 & 0,8,9,0,8,9,0,8,9,0 008 Belting, Wing 008 Belting Cover, Wing 008 Belting, Center 9 Belting Cover, Center 008 Belting, Outside Center 008 Belting Cover, Outside Center BH 0 Carriage Bolt /8 x -/ 8 0 Flatwasher /8 9 0 Lockwasher /8 0 0 Hex Nut /8 A--

14 BUSH HOG / LAND MAINTENANCE REPAIR S MANUAL REAR BAND ASSEMBLY FOR SINGLE WING WHEELS Model 0 & 0 8, 0, , 9, 0, 8 0 8, 0, L. H. WING 8, 9, 0, 8, 9, 0, CENTER 8, 9, 0, 8, 9, 0, 8, 0, 0 8, 9, 0, 8, 9, 0, 8 R. H. WING Outside Band, L.H Inside Band, L.H Center Band Inside Band, R.H Wing Center Band Outside Band, R.H Outside Band 8 Carriage Bolt /8 x -/ 9 8 Flatwasher /8 0 Lockwasher /8 Hex Nut /8 A--

15 BUSH HOG / LAND MAINTENANCE REPAIR S MANUAL REAR BAND ASSEMBLY FOR DUAL WING WHEELS Model 0 & 0,, ,, 8,,, 8 L. H. WING,,, 8 CENTER,,, 8,, 8,,, 8 8 9,,, 8 R. H. WING Inside Band, L.H Center Band Inside Band, R.H Outside Band Carriage Bolt /8 x -/ Flatwasher /8 Lockwasher /8 8 Hex Nut / Center Band, R.H. Wing Center Band, L.H. Wing 0080 Spacer BH Carriage Bolt /8 x -/ 8 Carriage Bolt /8 x -/ A--

16 BUSH HOG / LAND MAINTENANCE REPAIR S MANUAL CENTER SHIELD ASSEMBLY Model 0 & 0 AUGUST, Shield w/ Decals Shield Mount Assy Center Gearbox Shield 0089 Hinge Pin Flatwasher / 000 Cotter Pin /8 x / Capscrew /8 x Locknut /8 9 9 Important Decal 0 80 Important Decal 008 Warranty Decal Hex Nut / 99 Lynch Pin Model Decal, Model Decal, Capscrew M0 x Capscrew w/ Patch M0 x 98 8 Lockwasher M0 8 8 Flatwasher / Owner s Manual Tube Assembly Manual Cap Seal N/A Manual Holder Cap Capscrew / x /8 Flatwasher / Lockwasher / Hex Nut / 00 Mount Bracket Lockwasher / 8 Flatwasher / 9 Capscrew / x -/ Gr. A--

17 BUSH HOG / LAND MAINTENANCE REPAIR S MANUAL AUGUST, 0 DRIVELINE SHIELD CONE (REPLACES OLD STYLE METAL SHIELDING ON WING ASSEMBLIES) Ref. Part Description Qty. No. No. Req d Shield Cone Assy Capscrew M0 x. x Lockwasher M Flatwasher /8 A--

19 BUSH HOG / LAND MAINTENANCE REPAIR S MANUAL 0 TRANSFER GEARBOX ASSEMBLY 0 RPM Used on 0 0 TRANSFER GEARBOX ASSEMBLY 000 RPM Used on 0 & 0 Shredder , 09 Bearing Casing 008 Oil Seal 088 Snap Ring 0 Shim. Gear, Teeth (0 Assembly) Gear, 0 Teeth (0 Assembly) Shaft -/ Z0 8 Gear, 0 Teeth (0 Assembly) Gear, Teeth (0 Assembly) 9 Shaft, -/ Z0 0 Cover 89BH Capscrew M0 x. x Gr Gas Plug /8 0 Shim. 0 Shim. 0 Shim. 808 Vent Plug A--

20 BUSH HOG / LAND MAINTENANCE REPAIR S MANUAL 0089 CENTER GEARBOX ASSEMBLY MODEL 0 & 0 SHREDDER 000 RPM, Ratio.: CCW Rotation CENTER GEARBOX ASSEMBLY MODEL 0 0 RPM, Ratio :. CCW Rotation Mfd. by Comer AUGUST, 0 8 Casting 00 Gear, Output, Teeth (0089) Gear, Output, 8 Teeth (00800) 09 Bearing 008 Oil Seal 9 Input Shaft -/ 089 Snap Ring 0 Shim.mm 8 8 Top Plate 9 08 Castle Nut 0 0 Shim.mm 09 Oil Filler Plug / Gas 9BH Capscrew M0 x Gr Bearing Protective Washer 00 Oil Seal 00 Bearing 8 Shaft, Output Vent Plug 9 9 Cotter Pin B x Cap 00 Gear, Input, Teeth (0089) 8 Gear, Input, Teeth (00800) 00 Shim 0 Snap Ring Shim, 0. x. x.0 0 Shim, 0. x 8. x 0. 0 Shim, 0. x 8. x 0. 0 Shim, 0. x 8. x.0 8 0BH Shim, 0. x 0. x BH Shim, 0. x 0. x Shim, 0. x 0. x 0. Blank Washer 08 Castle Nut M 09 Cotter Pin A--

21 BUSH HOG / LAND MAINTENANCE REPAIR S MANUAL RH WING GEARBOX ASSEMBLY MODEL 0 & 0 SHREDDER 000 RPM, Ratio.: 0080 RH WING GEARBOX ASSEMBLY MODEL 0 0 RPM, Ratio :.0 Mfd. by Comer AUGUST, 0 8 Casting 8 Gear, Output, Teeth (00899) 88 Gear, Output, 9 Teeth (0080) 09 Bearing 008 Oil Seal 9 Input Shaft -/ 089 Snap Ring 0 Shim.mm 8 8 Top Plate 9 08 Castle Nut 0 0 Shim.mm 09 Oil Filler Plug / Gas 9BH Capscrew M0 x Gr Bearing Protective Washer 00 Oil Seal 00 Bearing 8 Shaft, Output Vent Plug 9 9 Cotter Pin 0 0 Cap Gear, Input, 8 Teeth (00899) 88 Gear, Input, 0 Teeth (0080) A-- 00 Shim 0 Snap Ring Shim, 0. x. x.0 0 Shim, 0. x 8. x 0. 0 Shim, 0. x 8. x 0. 0 Shim, 0. x 8. x.0 8 0BH Shim, 0. x 0. x BH Shim, 0. x 0. x Shim, 0. x 0. x 0. Blank Washer 08 Castle Nut M 09 Cotter Pin

22 BUSH HOG / LAND MAINTENANCE REPAIR S MANUAL LH WING GEARBOX ASSEMBLY MODEL 0 & 0 SHREDDER 000 RPM, Ratio.: CCW Rotation 0080 LH WING GEARBOX ASSEMBLY MODEL 0 0 RPM, Ratio :.0 CCW Rotation Mfd. by Comer AUGUST, 0 8 Casting 8 Gear, Output, Teeth (00898) 88 Gear, Output, 9 Teeth (0080) 09 Bearing 008 Oil Seal 9 Input Shaft -/ 089 Snap Ring 0 Shim.mm 8 8 Top Plate 9 08 Castle Nut 0 0 Shim.mm 09 Oil Filler Plug / Gas 9BH Capscrew M0 x Gr Bearing Protective Washer 00 Oil Seal 00 Bearing 8 Shaft, Output Vent Plug 9 9 Cotter Pin B x Cap Gear, Input, 8 Teeth (00898) 88 Gear, Input, Teeth (0080) 00 Shim 0 Snap Ring Shim, 0. x. x.0 0 Shim, 0. x 8. x 0. 0 Shim, 0. x 8. x 0. 0 Shim, 0. x 8. x.0 8 0BH Shim, 0. x 0. x BH Shim, 0. x 0. x Shim, 0. x 0. x 0. Blank Washer 08 Castle Nut M 09 Cotter Pin A--

23 BUSH HOG / LAND MAINTENANCE REPAIR S MANUAL MODEL 0 (0 RPM) 009 TRANSFER GEARBOX ASSEMBLY. - 0 RPM MFG. BY BONDIOLI & PAVESI MODEL 0 (000 RPM) 009 TRANSFER GEARBOX ASSEMBLY RPM MFG. BY BONDIOLI & PAVESI DESCRIPTION QTY. 009 Top Cover 009 Drain Plug (Magnetic) 009 Output Shafts -/ 0 Spline 0098 Oil Seal 0099 Snap Ring 8 x mm 0090 Shim Kit 09 Bearing x x 8.mm Housing Input Shaft Breather Plug (Gas) /8 009 Capscrew M0 x x. C Gear Set for 0 RPM Gearbox 009 (Two 9 Tooth Gears and One Tooth Gear) 009 Gear Set for 000 RPM Gearbox 009 (Two Tooth Gears and One 9 Tooth Gear) 00 Lockwasher, M0 09 Bearing A--

25 BUSH HOG / LAND MAINTENANCE REPAIR S MANUAL 000SP CV DRIVESHAFT ASSEMBLY 0 RPM, -/8 Spline Tractor Yoke ASAE Size Mfr: Bondioli & Pavesi Model: Yoke, CV -/8, Spline 00 Cross Bearing Kit 009 Yoke 00 Central Body 00 Roll Pin 0090 Drive Tube, Outer 8 Flexible Roll Pin, Inner Yoke, Inner Tube Drive Tube, Inner 0 00 Yoke, -/, 0 Spline 99 Cross Bearing Kit 00 Shield Support, Outer 00 Shield Support 0 Screw, Self-Tapping 0 Shield Support, Inner 0009 Washer 000 Shield Chain 8 88 Danger Decal, Outer Tube Danger Decal, Shield 0 00 Ball Collar Kit -/8 000 Taper Pin Kit, Pins 008 Complete Shield A--

26 BUSH HOG / LAND MAINTENANCE REPAIR S MANUAL 000SP CV DRIVESHAFT ASSEMBLY 000 RPM, -/8 Spline Tractor Yoke ASAE Size Mfr: Bondioli & Pavesi Model: Yoke, CV -/8 Spline 00 Cross Bearing Kit 008 Yoke 00 Central Body 00 Roll Pin 9 Drive Tube, Outer 9 Flexible Roll Pin, Inner 8 98 Yoke, Inner Tube Drive Tube, Inner 0 00 Yoke, -/, 0 Spline 99 Cross Bearing Kit 00 Shield Support, Outer 00 Shield Support 0 Screw, Self-Tapping 0 Shield Support, Inner 0009 Washer Single Chain Restraint Collar Screw Shield Chain 0 88 Danger Decal, Outer Tube 808 Danger Decal, Shield 00 Ball Collar Kit -/8 000 Taper Pin Kit, Pins 008 Half Shaft, Outer, Shielded 008 Half Shaft, Inner, Shielded 008 Complete Shield A--

27 BUSH HOG / LAND MAINTENANCE REPAIR S MANUAL 000SP C.V. Driveshaft Input : -/ 0 Spline, ASAE Size Manufactured by Comer / EG 0 & 0 Shredder (000 RPM Model) Complete Collar Yoke (Tractor) 0000 Cross Journal Set Grease Nipple Wide Angle Double Yoke 89 Outer Yoke 08 Roll Pin For Outer Tube 89 Wiper 8 90 Complete Outer Tube Cross Journal Set 0 9BH Complete Yoke Screw Kit 000 Bearing Ring 000 Guard Retaing Collar for Outer Tube 000 Bolt 000 Guard Retaining Collar for Inner Tube 8 Safety Chain 000 Guard Cone Set Complete Guard w/inst. Man. 9 Tapered Pin Set -/ Female Tube w/ Yoke & Lube System 0009 Male Tube w/ Yoke & Lube System Half Female Shaft w/ Guarding 00 Half Male Shaft w/ Guarding 88 Danger Decal for Outer Tube 808 Danger Decal for Outer Guard Tube 899 Plastic Cap 000 Kit Collar For Yoke -/ A--

28 BUSH HOG / LAND MAINTENANCE REPAIR S MANUAL 0088 DRIVESHAFT ASSEMBLY WITH CLUTCH Center Driveshaft ASAE Size 000 RPM -/ 0 Spline Manufactured by Comer / EG Used on 0 & Complete Yoke 000 Cross Journal Set Grease Nipple 9 Splined Shaft 89 Roll Pin for Inner Tube 0 Inner Yoke Complete Disc Clutch 8 Tapered Pin Set -/ 9 BH 8 Lock Nut M Spring Flanged Yoke 08 Bushing 08 Lining Ring 8 Clutch Support 08 Inner Plate 9 Intermediate Plate 08 Pressure Plate 8 9BH 8 Capscrew M0 x. x Inner Yoke without Roll Pin A--

29 BUSH HOG / LAND MAINTENANCE REPAIR S MANUAL 0089 DRIVESHAFT ASSEMBLY WITH CLUTCH Wing Driveshaft ASAE Size 000 RPM -/ 0 Spline Manufactured by Comer / EG Used on 0 & BH Complete Yoke 998 Cross Journal Set Grease Nipple Complete Disc Clutch 000 Guard Retaining Collar, Outer Tube 000 Bolt 000 Guard Retaining Collar, Inner Tube 8 8 Safety Chain Complete Guard 0 BH 8 Lock Nut M0 Tapered Pin Set -/ Spring Flanged Yoke 08 Bushing 08 Lining Ring 8 Clutch Support 08 Inner Plate 8 9 Intermediate Plate 9 08 Pressure Plate 0 9BH 8 Capscrew M0 x. x 00 G8.8 9 Female Tube w/ Yoke and Lube 0009 Male Tube w/ Yoke and Lube N/A Half Female Shaft w/ Guarding N/A Half Male Shaft w/ Guarding 88 Danger Decal, Outer Tube 808 Danger Decal, Outer Shield Tube 8 Outer Yoke 8 08 Roll Pin, Outer Tube Wiper Grease Fitting, Lube A--

31 BUSH HOG / LAND MAINTENANCE REPAIR S MANUAL TONGUE, LEVELING RODS & RELATED S Used on Models 0 & 0 (CURRENT STYLE) Tongue Weldment 0099 Tongue Bushing 8898 Tongue Pin Cotter Pin / x 080 Capscrew x -/ 900 Locknut Leveling Rod Weldment Jam Nut -/ Turnbuckle 0 0 Turnbuckle End Cotter Pin / x -/ --9 Clevis Pin Weldment 908BH Flatwasher A Leveling Rod Assembly ( 0) 0 Rod, Hose Holder Capscrew /8 x Flatwasher /8 8 Lockwasher /8 9 Hex Nut / Jackstand Assembly 0099 Mount Pad Capscrew / x Gr. Lockwasher / Hex Nut / 90 Safety Tow Chain D8 Warning Decal, Jack 0090 Bracket, Jack Weldment Washer, Jack

32 BUSH HOG / LAND MAINTENANCE REPAIR S MANUAL TONGUE, LEVELING RODS & RELATED S Used on Models 0 & 0 (FOR EARLIER VERSIONS) Tongue Weldment 0099 Tongue Bushing 8898 Tongue Pin Cotter Pin / x 080 Capscrew x -/ 900 Locknut Leveling Rod Weldment Jam Nut -/ Turnbuckle 0 0 Turnbuckle End Cotter Pin / x -/ --9 Clevis Pin Weldment 908BH Flatwasher Leveling Rod Assembly ( 0) 0 Hose Holder Assembly Capscrew /8 x NOTE: If your machine has the Old Style Jack Mount like the illustration above, to replace the Jack or the Mount you must order item 0, 0009 Jack Mount Kit. QTY. DESCRIPTION Flatwasher / Lockwasher / Hex Nut / Adjustable Mount ( Position) 00 Mount Pad Capscrew /8 x Jackstand Assembly Lockwasher / Hex Nut / Jack Storage Mount Adaptor Locknut / Capscrew / x -/ Gr. 9 D Decal, Warning Jackstand Mount Kit 90 Safety Towing Chain A--

33 BUSH HOG / LAND MAINTENANCE REPAIR S MANUAL 000SP SWIVEL PIVOT HITCH Models: 0 and Collar Capscrew /8 x / Gr. 98BH Locknut /8 008 Pin Weldment Capscrew /8 x -/ 900 Locknut / Clevis Weldment 8 00 Hitch Weldment Direction Decal Directon Decal 99 Patent Decal 0098 BALL HITCH ASSEMBLY Models 0 & Lockwasher /8 Hex Nut /8 009 Ball Hitch Weldment / Ball Assy. Capscrew /8 x Gr. Flatwasher /8 8 Collar 8 Capscrew /8 x / Gr. 9 Locknut / Bushing 0 A--

34 BUSH HOG / LAND MAINTENANCE REPAIR S MANUAL AXLE ASSEMBLY (SWIVEL TURNBUCKLE) Used on Models 0 & 0, 0, BUSH HOG Assembly Instructions 9, 8, 9, 0, 0089 Center Axle 008 Right Wing Axle 00 Left Wing Axle 00 Amber Reflector 00 Red Reflector 009 Spring Bushing -/ 009 Pivot Pin x Pivot Pin x Long Center Axle Pin x Pivot Pin x 9.88 Capscrew /8 x Gr. 0 Locknut /8 00 Turnbuckle Assembly ( 8) 00 Rod Eye, Threaded 00 Rod Eye, Swivel 00 Turnbuckle Body 00 Lock Nut -/ Grease Fitting, M 9 00 Capscrew x -/ Spacer. 900 Locknut 0080 Lockwasher -/ -Piece Nord-Lock 8 Lockwasher 00 Instruction Sheet Not included in 000 Turnbuckle Assembly. A--

35 BUSH HOG / LAND MAINTENANCE REPAIR S MANUAL AXLE ARM, SPINDLE & HUB ASSEMBLIES For Models 0 & 0 To convert wing axles from single axle to dual axle: Order Conversion Kit 009 for 0 & 0 Models Dual Axle Assembly 00 Single Axle Assembly, L.H. 00 Single Axle Assembly, R.H. 00 Tandem Axle Assembly, L.H. 00 Tandem Axle Assembly, R.H. 008 Tube Assembly 0 Locknut / Spring Bushing -/ Capscrew / x -/ G8 Lockwasher / Hex Nut / 080 Capscrew x -/ 8 BH Flanged Locknut 9 9 Spring Cup 0 9 Rubber Cushion 000 Spring 008 Pivot Pin. x.0 Capscrew /8 x 000 Dual Spindle 009 Single Spindle 000 Hub Assembly 00 Hub w/ Cups 8 BH Lug Nut / 9 Lug Bolt BH Grease Fitting -- Hub Cap 9 Seal 00BH Bearing, Inner --9 Bearing Cup Flatwasher / 0BH Slotted Hex Nut / Cotter Pin /8 x -/ 8 00 Bearing Kit Tandem Axle, L.H Tandem Axle, R.H. (Not shown) Pin Weldment 0 Spiral Pin /8 x -/ 0098 Tandem Tube Assembly 000 Tandem Spindle Capscrew / x -/ Locknut / --9 Bearing Cup --98 Bearing Cup 8 A--

BUSH HOG / LAND MAINTENANCE REPAIR S MANUAL 9SP SOLID TIRE ASSEMBLY AIR FILLED AIRPLANE TIRE ASSEMBLY Model: 0 8 00BH Tire 9 x 9.

36 BUSH HOG / LAND MAINTENANCE REPAIR S MANUAL 9SP SOLID TIRE ASSEMBLY AIR FILLED AIRPLANE TIRE ASSEMBLY Model: BH Tire 9 x 9.0 / Ply 00 Tube 9 x 00 Wheel Flange with Valve Hole 00 Wheel Flange without Valve Hole 0 Capscrew / x Gr. 0 Lockwasher / 0 Hex Nut / 8 000SP Air Filled Airplane Tire A--

37 BUSH HOG / LAND MAINTENANCE REPAIR S MANUAL FOAM FILLED AIRPLANE TIRE ASSY. x. x 0088SP Foam Filled Tire Assembly x. x A--

39 BUSH HOG / LAND MAINTENANCE REPAIR S MANUAL BAFFLE KIT For 0 Models Note: Left side baffles shown Front Baffle Weldment, R.H. 00 Front Baffle Weldment, L.H. 00 Rear Baffle Weldment, R.H. 00 Rear Baffle Weldment, L.H. Capscrew /8 x 8 Flatwasher /8 Lockwasher /8 Hex Nut /8 Carriage Bolt / x -/ 8 Lockwasher / 9 Hex Nut / 0 8 Capscrew /8 x 8 Flatwasher /8 8 Lockwasher / Locknut /8 00 Bearing Plate, Rear 008 Special Washer 008 Baffle Retainer, R.H. 009 Baffle Retainer, L.H. 009 Rear Baffle Retainer, L.H. 009 Rear Baffle Retainer, R.H Hinge Connector, L.H. 00 Hinge Connector, R.H Bearing Plate, Center A--

40 BUSH HOG / LAND MAINTENANCE REPAIR S MANUAL 0098 SHREDDER CROSS BAR KIT Used on 0 Straight Bar Shredder Models: 0SSR, 0SS, 0SSR and 0SS Existing Straight Blade Bar Shredder Assembly (See deck assemblies for these parts) 0 8 BUSH HOG ASSEMBLY INSTRUCTIONS Cross Bar Assembly (Ref. # ) 99BH Blade Bolt 000BH Blade, Straight Double Edge 009 Cross Bar Weldment BH Jam Nut -/8 NF Lockwasher -/8 009 Nut Retainer Gearbox Nut 9 99BH Carriage Bolt /8 x 0 Flatwasher /8 Lockwasher /8 900 Locknut /8 Gr. C Instruction Sheet A--

41 BUSH HOG / LAND MAINTENANCE REPAIR S MANUAL HYDRAULICS FOR 0 & 0 MODELS WHEN PLUMBING TO TRACTOR REMOTES Ref. Part Description Qty. No. No. 99 Wing Lift Cylinder 99 Axle Control Cylinder 8 Hydraulic Hose Assy. 0" 0BH Adaptor 9/ JIC to / SAE -- Adaptor 9/ JIC to / NPT Elbow 90 degree 800 Breather Plug 0088 Restrictor,.08 Orfice Stop Kit 9 0 Hose Holder Assy A--

42 BUSH HOG / LAND MAINTENANCE REPAIR S MANUAL 8 0 Cylinder Assembly Part Number Stamped Here HYDRAULIC CYLINDER, WING Mfd. by Monarch Bore x Stroke. Rod Dia. / ORB Ports 99 HYDRAULIC CYLINDER, AXLE Mfd. by Monarch Bore x 8 Stroke. Rod Dia. / ORB Ports 9 Clevis Cap 9 Rod Cap 009 Piston N/A Rod. Dia. 9 Cylinder Tube 9 Tie Rod 9 Pin Dia Cotter Pin / x / 9 9 Thread Lock 0 99 Rod Clevis. x 9 Set Screw /8 x / Knurled 90 8 Hex Nut /8 9 Hex Nut /8 UNF 9 Plug / 000 Caution Decal 00 Seal Kit 9 Clevis Cap 9 Rod Cap 009 Piston N/A Rod. Dia. 90 Cylinder Tube 9 Tie Rod 9 Pin Dia Cotter Pin / x / 9 9 Thread Lock 0 99 Rod Clevis. x 9 Set Screw /8 x / Knurled 90 8 Hex Nut /8 9 Hex Nut /8 UNF 9 Plug / 000 Caution Decal 00 Seal Kit A--

43 BUSH HOG / LAND MAINTENANCE REPAIR S MANUAL 0099 DECAL KIT For Models 0 & 0 Ref. No. Part No. Description Qty. Ref. No. Part No. Description Qty. 00 Amber Reflector x 9 00 Red Reflector x Bush Hog Decal D Warning Decal D Danger Decal D8 Lubrication Decal 80 Important Decal Warranty Decal 9 9 Decal, Important 0 D9 Genuine BH Parts Decal D9 Decal, Danger/Important D8 Warning Decal (Overlay) Model Decal, Model Decal, 0 D Danger Decal D Danger Decal D Blade Rotation Decal CW D Blade Rotation Decal CCW 8 D Decal, Danger, Missing Guard 9 D Important Decal 0 D Danger Decal D8 Decal, Danger - Multilingual A-8-

46 0 GRIFFIN AVE. SELMA, AL 0 () 8- () 8-00 S ORDERING FAX

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODELS: RPM & RPM SECTION: 79

BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODELS: -0 RPM & -000 RPM SECTION: 9 0 Griffin Ave. Selma, Al. 0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com April, 0 BUSH HOG/ LAND MAINTENANCE