Parts Manual 6539, 6541, 6543 & 6545UC. Ultra Chisel 5-Section. Copyright 2018 Printed 02/08/ P

Transcription

1 Table of Contents Part Number Index Parts Manual Ultra Chisel 5-Section 6539, 6541, 6543 & 6545UC Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! Cover illustration may show optional equipment not supplied with standard unit. Copyright 2018 Printed 02/08/ P

2 Table of Contents Table of Contents Part Number Index Section 1: Introduction...4 Using This Manual...4 Manual Replacement Information...4 Manual Revisions...4 Touch-up Paint...4 Hardware Legend...5 Replacement Hardware...5 Serial Numbers...5 Part Number Service Coding...5 Section 2: Frames...6 Hitch Assembly...6 Center Frame Assembly...8 Inside Wing Assembly...10 Outside Wing Assembly: 6539 & 6541UC...12 Outside Wing Assembly: 6543 & 6545UC...14 Level Bar & Torque Tube...16 Equalizer & Level Bar...18 Lights & Fold Assist Assembly...20 Section 3: Transport...22 Center Walking Beam...22 Wing Walking Beam...24 Center Gauge Wheel Assembly...26 Inside Wing Gauge Wheel Assembly...28 Wing Gauge Wheel (Single Wheel)...30 Slide in Hubs & Spindles...32 Section 4: Hydraulics...34 Depth Control Assembly...34 Hydraulic Lift & Fold System - Hitch...36 Hydraulic Fold System...38 Hydraulic Lift System - Center...40 Hydraulic Lift System - Wings...42 Hydraulic Cylinder ( C 4X10X38 ROD)...46 Hydraulic Cylinder ( C 3.75X10X38 ROD)...48 Hydraulic Cylinder ( C 25X10X50 ROD)...50 Hydraulic Cylinder Soft Close ( C 4X24X50 ROD)...52 Hydraulic Cylinder Soft Close ( C 4X30X50 ROD)...54 Section 5: Shanks...56 Spring Shank Assembly...56 Section 6: Decals...58 Decals...58 Section 7: Attachments Row Spike HR Drag Assembly Row Heavy Coil Tine Assembly...62 Reel Assembly...64 Rear Hitch...66 Rear Hitch Accessories...68 Part Number Index...70 Copyright 2018 All rights reserved Printed 02/08/18 Great Plains Manufacturing, Inc. provides this publication as is without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. Great Plains Manufacturing, Incorporated Trademarks The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains All other brands and product names are trademarks or registered trademarks of their respective holders. Printed in the United States of America P /08/18

3 Table of Contents Part Number Index Alphabetized Table of Contents Selected Models 3 3 Row Heavy Coil Tine Assembly...62 W Wing Gauge Wheel (Single Wheel)...30 Wing Walking Beam Row Spike HR Drag Assembly...60 C Center Frame Assembly...8 Center Gauge Wheel Assembly...26 Center Walking Beam...22 D Decals...58 Depth Control Assembly...34 E Equalizer & Level Bar...18 H Hitch Assembly...6 Hydraulic Cylinder ( C 4X10X38 ROD)...46 Hydraulic Cylinder ( C 3.75X10X38 ROD)...48 Hydraulic Cylinder ( C 25X10X50 ROD)...50 Hydraulic Cylinder Soft Close ( C 4X24X50 ROD)...52 Hydraulic Cylinder Soft Close ( C 4X30X50 ROD)...54 Hydraulic Fold System...38 Hydraulic Lift & Fold System - Hitch...36 Hydraulic Lift System - Center...40 Hydraulic Lift System - Wings...42 I Inside Wing Assembly...10 Inside Wing Gauge Wheel Assembly...28 L Level Bar & Torque Tube...16 Lights & Fold Assist Assembly...20 O Outside Wing Assembly: 6539 & 6541UC...12 Outside Wing Assembly: 6543 & 6545UC...14 R Rear Hitch...66 Rear Hitch Accessories...68 Reel Assembly...64 S Slide in Hubs & Spindles...32 Spring Shank Assembly /08/ P

4 Table of Contents P Part Number Index -4-02/08/18

5 Table of Contents Part Number Index 02/08/ P

6 Hitch Assembly Table of Contents Part Number Index P /08/18

7 Hitch Assembly Table of Contents Part Number Index Section 2: Frames Ref. Part No. Part Description Comments Revision dwg H C C C C C C C C C C C C C C C C C D C C PPI-302V PPI-203VR PPI-205H C V C D D C C ImageNo. WIDE HITCH HHCS 1 1/4-7X8 GR8 SPTHD NUT HEX TOP LOCK 1 1/4-7 PLT WASHER FLAT 1 1/8 SAE PLT SQUARE SCREW JACK 5000LBS. HHCS 5/16-18X4 GR5 REBOUND VALVE WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT HHCS 1/2-13X1 WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1/2 USS PLT SPRING HOSE LOOP HEAVY NUT HEW LOCK 7/8-9 PLT WASHER LOCK SPRING 1 PLT NUT HEX 1-8 PLT HITCH BASE - CAT III & IV HITCH CLEVIS W/BOLT SAFETY CHAIN LB HHCS 1-8X7 1/2 GR8 SPTHD PLT HHS 7/8-9X4 GR5 TOP PLATE - CAT 3 V-BLOCK CUSHION HHCS 3/4-10X3 GR5 HITCH TONGUE CAT III ASSEMBLY CAT 5 PERFECT HITCH 1"X7" GRADE 8 SPECIAL THREAD SAFETY CHAIN SUPPORT CAT IV ARTICULATING BALL HITCH CAT V ARTICULATING BALL HITCH 02/08/ P

8 Table of Contents Center Frame Assembly Part Number Index P /08/18

9 Table of Contents Part Number Index Section 2: Frames Center Frame Assembly Ref. Part No. Part Description Comments Revision dwg H H H H H H H H H H C C C C C C C C D C C C C C C H ImageNo. WIDE CENTER FRAME WIDE CENTER FRAME CENTER BRACE BAR CENTER BRACE BAR RH FRAME TRUSS LH FRAME TRUSS 6500UC WING STOP FRONT 6500UC WING STOP REAR CENTER FOLD BRACKET FRONT CENTER FOLD BRACKET REAR DECAL SLOW MOVING-GALV. BACKED SCREW PAN HD 1/4-20 X 3/4 WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT HHCS 3/4-10X2 GR5 WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT PIN HTCH.75X6.0 USBL W/PIN 25X10 CYL TRANSPORT LOCK PIN BENT.38X3.0 USBL W/PIN BUSHING CYL 1 1/4 X 1 X 1 MANUAL PAK 1" W/GASKET HHCS 1/4-20X1 GR5 MINI END WHEEL PRESS WHEEL HHCS 3/4-10X2 1/4 GR5 STAUFF BOLT ON MNT - UC (S/N GP-C1057Z+) Replaced by H (S/N GP-C1056Z-) (S/N GP-C1057Z+) Replaced by H (S/N GP-C1056Z-) 02/08/ P

10 Table of Contents Inside Wing Assembly Part Number Index P /08/18

11 Table of Contents Part Number Index Section 2: Frames Inside Wing Assembly Ref. Part No. Part Description Comments Revision dwg H H H H H H H H H S S H H H C C C C C C C D C C C D C H D C C C C C S C C C C C H H H C H C C ImageNo. UC 6500 SMALL INSIDE WING RH UC 6500 SMALL INSIDE WING LH UC 6500 MED INSIDE WING RH UC 6500 MED INSIDE WING LH UC 6500 SMALL INSIDE BRACE RH UC 6500 SMALL INSIDE BRACE LH UC 6500 MED INSIDE BRACE RH UC 6500 MED INSIDE BRACE LH RH WING LEVEL BAR LH WING LEVEL BAR TURNBUCKLE TURNBUCKLE LIFT ROCKER UC 6500 SMALL INSIDE FOLD BKT UC 6500 MED INSIDE FOLD BKT HHCS 3/4-10X2 GR5 NUT HEX 3/4-10 PLT WASHER LOCK SPRING 3/4 PLT HHCS 3/4-10X5 GR5 HHCS 1-8X4 GR8 SPTHD NUT HEX TOP LOCK 1-8 PLT WASHER FLAT 1 SAE PIN-SNAP RING 1 X 5.13 USABLE SNAP RING EXT 1 HEAVY WASHER MACH 5X00X.075 PIN-SNAP RING 1 X 3.00 USABLE HHCS 1-8X6 1/4 GR8 SPTHD PIN-SNAP RING 1 X 5.38 USABLE HINGE PIN PIN - HINGE HFS 5/8-11 X 1 1/4 GR8 PLT PIN SPIROL 3/8 X 2 1/2 PLAT NUT HEX LOCK 7/8-9 PLT WASHER FLAT 1 1/8 SAE PLT WASHER FLAT 7/8 SAE PLT PLATE - TORCHED W/BUSHING BUSHING CYL 1 1/4 X 1 X 1 SLEEVE BEARING 25 ID X 5 L HHCS 1-8X3 1/4 GR8 SPTHD HHCS 1-8X9 GR8 SPTHD WASHER FLAT 3/4 USS PLT H-BRACKET WING STOP OUTSIDE WING HINGE BKT U-BOLT 3/4-10 X 4 1/32 X 5 3/4 OUTER WING AUTO LOCK HHCS 3/4-10X5 1/2 GR5 NUT HEX TOP LOCK 3/4-10 PLT Models 6539 & 6541 (Shown) Models 6539 & 6541 Models 6543 & 6545 Models 6543 & 6545 Models 6539 & 6541 (Shown) Models 6539 & 6541 Models 6543 & 6545 Models 6543 & 6545 Shown Models 6539 & 6541 Models 6543 & 6545 (S/N GP-C1057Z+) Replaced by H (S/N GP-C1056Z-) (S/N GP-C1057Z+) Replaced by C (S/N GP-C1056Z-) (Not Shown) Removed with Hinge Pin change (S/N GP-C1056Z-) (S/N GP-C1057Z+) Replaced by C (S/N GP-C1056Z-) Models 6539 & /08/ P

12 Table of Contents Part Number Index Outside Wing Assembly: 6539 & 6541UC (Applies to 6539UC, 6541UC only) P /08/18

13 Table of Contents Part Number Index Section 2: Frames Outside Wing Assembly: 6539 & 6541UC (Applies to 6539UC, 6541UC only) Ref. Part No. Part Description Comments Revision dwg H H H H H H H S S H S H C C C C C C C C C C C C D H C C D C C C C C H Image No. UC 6500 SMALL OUTSIDE WING UC 6500 SMALL OUTSIDE WING UC 6500 SMALL OUTSIDE BRACE UC 6500 SMALL OUTSIDE BRACE OUTER WING LEVEL BAR OUTER FOLD BRACKET WING FOLD LINKAGE TURNBUCKLE TURNBUCKLE LIFT ROCKER PLATE - TORCHED W/BUSHING WING LOCK T-BRACKET HHCS 1-8X3 1/4 GR8 SPTHD HHCS 1-8X4 GR8 SPTHD NUT HEX TOP LOCK 1-8 PLT WASHER FLAT 1 SAE U-BOLT 3/4-10 X 4 1/32 X 5 3/4 BUSHING CYL 1 1/4 X 1 X 1 HHCS 3/4-10X2 GR5 NUT HEX 3/4-10 PLT WASHER LOCK SPRING 3/4 PLT PIN-SNAP RING 1 X 3.63 USABLE U-BOLT 5/8-11 X 4 1/32 X 3 3/8 SNAP RING EXT 1 HEAVY PIN-SNAP RING 1 X 5.13 USABLE HINGE PIN - 1 1/4 WASHER MACH 5X00X.075 PIN-SNAP RING 1 X 3.00 USABLE HHCS 1-8X6 1/4 GR8 SPTHD NUT HEX 5/8-11 PLT WASHER LOCK SPRING 5/8 PLT WASHER FLAT 1 1/4 SAE PLT SNAP RING EXT 1 1/4 HEAVY HHCS 1-8X9 GR8 SPTHD FRAME EXTENSION 14" Shown Shown Models 6541 & /08/ P

14 Table of Contents Part Number Index Outside Wing Assembly: 6543 & 6545UC (Applies to 6543UC, 6545UC only) P /08/18

15 Table of Contents Part Number Index Section 2: Frames Outside Wing Assembly: 6543 & 6545UC (Applies to 6543UC, 6545UC only) Ref. Part No. Part Description Comments Revision dwg H H H H H H H H S S H S H C C C C C C C C C C C C D H C C D C C C C C D Image No. UC 6500 MED OUTSIDE WING RH UC 6500 MED OUTSIDE WING LH UC 6500 MED OUTSIDE BRACE RH UC 6500 MED OUTSIDE BRACE LH RH WING LEVEL BAR LH WING LEVEL BAR OUTER WING 180 HINGE WING FOLD LINKAGE TURNBUCKLE TURNBUCKLE LIFT ROCKER PLATE - TORCHED W/BUSHING WING LOCK T-BRACKET HHCS 1-8X3 1/4 GR8 SPTHD HHCS 1-8X4 GR8 SPTHD NUT HEX TOP LOCK 1-8 PLT WASHER FLAT 1 SAE U-BOLT 3/4-10 X 4 1/32 X 5 3/4 BUSHING CYL 1 1/4 X 1 X 1 HHCS 3/4-10X2 GR5 NUT HEX 3/4-10 PLT WASHER LOCK SPRING 3/4 PLT PIN-SNAP RING 1 X 3.63 USABLE U-BOLT 5/8-11 X 4 X 5 1/4 SNAP RING EXT 1 HEAVY PIN-SNAP RING 1 X 5.13 USABLE HINGE PIN - 1 1/4 WASHER MACH 5X00X.075 PIN-SNAP RING 1 X 3.00 USABLE HHCS 1-8X6 1/4 GR8 SPTHD NUT HEX 5/8-11 PLT WASHER LOCK SPRING 5/8 PLT WASHER FLAT 1 1/4 SAE PLT SNAP RING EXT 1 1/4 HEAVY HHCS 1-8X9 GR8 SPTHD HOSE TRAY CAP Shown Shown Shown 02/08/ P

16 Table of Contents Level Bar & Torque Tube Part Number Index P /08/18

17 Table of Contents Part Number Index Section 2: Frames Level Bar & Torque Tube Ref. Part No. Part Description Comments Revision dwg H H H H H S H H H S C C D C C C D C C C C D C C ImageNo. LEVEL BAR REAR LEVEL BAR FRONT EQUALIZER GAUGE WHEEL EQUALIZER LINKAGE LIFT ROCKER TURNBUCKLE H-BRACKET WC TORQUE TUBE LIFT LINK PLATE - TORCHED W/BUSHING HHCS 1-8X3 1/4 GR8 SPTHD NUT HEX TOP LOCK 1-8 PLT HHCS 1-8X6 1/4 GR8 SPTHD WASHER MACH 5X00X.075 SNAP RING EXT 1 HEAVY PIN 25 X 6.75 HRD PLT PIN-SNAP RING 1 X 5.13 USABLE PIN-SNAP 1 X 3.00 USABLE PIN-SNAP RING 1 X 3.63 USABLE HHCS 1/2-13X2 5/8 GR8 SPTHD NUT HEX TOP LOCK 1/2-13 PLT PIN 50 X 6.50 HRD PLT HHCS 1/2-13X2 3/4 GR5 PIN-SNAP RING 1 X USABLE 02/08/ P

18 Table of Contents Equalizer & Level Bar Part Number Index P /08/18

19 Table of Contents Part Number Index Section 2: Frames Equalizer & Level Bar Ref. Part No. Part Description Comments Revision dwg H H H H H C D C C C C C C C C D C C C ImageNo. LEVEL BAR REAR LEVEL BAR FRONT EQUALIZER GAUGE WHEEL EQUALIZER LINKAGE H-BRACKET PIN-SNAP RING 1 X 3.00 USABLE PIN 50 X 6.50 HRD PLT PIN-SNAP RING 1X10.25 USABLE PIN-SNAP RING 1 X 3.63 USABLE WASHER MACH 5X00X.075 SNAP RING EXT 1 HEAVY HHCS 1/2-13X2 3/4 GR5 NUT HEX TOP LOCK 1/2-13 PLT BUSHING HARDENED 1 1/4-1-34L BUSHING CYL 1 1/4 X 1 X 1 LEVEL BAR SHIM HHCS 3/4-10X5 GR5 NUT HEX TOP LOCK 3/4-10 PLT SLEEVE BEARING 50IDX50L 02/08/ P

20 Table of Contents Lights & Fold Assist Assembly Part Number Index P /08/18

21 Table of Contents Part Number Index Section 2: Frames Lights & Fold Assist Assembly Ref. Part No. Part Description Comments Revision dwg C C C H H C C C C C C C C C C D C C C C C C C D C D C C C ImageNo. LIGHT HARNSS LEAD W/POWER LEAD LIGHT HRNSS ENHANCE MODULE LIGHT HRNSS, 12' WISHBONE LIGHT BRACKET RH LIGHT BRACKET LH LIGHT, AMBER LAMP LED LIGHT, RED LAMP - LED HHCS 1/4-20X1 1/4 GR5 WASHER FLAT 1/4 SAE PLT NUT LOCK 1/4-20 PLT U-BOLT 1/2-13 X 4 1/32 X 5 1/4 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT WHEEL RETRACT POWER HARNESS PROXIMITY SENSOR REFLECTOR BRACKET HHCS 3/8-16X1 GR5 DECAL REFLECTOR RED 2X9 DECAL REFLECTOR DAYTIME 2X9 WHEEL RETRACT SOLENOID HARNESS WHEEL RETRACT RELAY MANI ASSY WHEEL RETRACT WING MANI ASSY WHEEL RETRACT CNTR VALVE BRACKET HHCS 1/4-20X3 GR5 SPACER - 5/8 OD 5/16 ID X 7/8 WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT HHCS 1/4-20X2 GR5 Large plug will only fit into one plug on relay One on each side of center frame Large plug will only fit into one plug on relay Mounted on the Front fold bracket Mounted on front of center frame around the bulkhead plate 02/08/ P

22 Table of Contents Center Walking Beam Part Number Index P /08/18

23 Table of Contents Part Number Index Section 3: Transport Center Walking Beam Ref. Part No. Part Description Comments Revision dwg H H H D C C C C D C C C C C C C C ImageNo. WC TORQUE TUBE RH CTR WALKING BEAM 8000LB LH CTR WALKING BEAM 8000LB WALKING BEAM PIVOT PIN GREASE CAP X.38 HHCS 3/4-10X4 1/2 GR5 NUT HEX TOP LOCK 3/4-10 PLT SLEEVE BEARING 25 ID WALKING BEAM SPACER 8-BOLT HUB SPINDLE ASM 75-8 TIRE GOOD YEAR 380/55R16.5 LD F WHEEL 16.5X12 8 BOLT 6PILOT BKSN TIRE /WHL 380/55R16.5 BUCKSKIN NUT LUG 5/8-18 X 90 DEG PLT HHCS 1/2-13X4 1/2 GR5 NUT HEX TOP LOCK 1/2-13 PLT DECAL CAUTION TIRE 73PSI/170 02/08/ P

24 Table of Contents Wing Walking Beam Part Number Index P /08/18

25 Table of Contents Part Number Index Section 3: Transport Wing Walking Beam Ref. Part No. Part Description Comments Revision dwg H H H H D C C C C D C C C C C C C C C C C ImageNo. RH WING TQ TUBE LH WING TQ TUBE WING WALKING BEAM RH WING WALKING BEAM LH WALKING BEAM PIVOT PIN GREASE CAP X.38 HHCS 3/4-10X4 1/2 GR5 NUT HEX TOP LOCK 3/4-10 PLT SLEEVE BEARING 25 ID WALKING BEAM SPACER HUB 8-BLT SPNDL 75X TIRE 15 X PLY WHEEL 15X10 8 BOLT BUCKSKIN TIRE/WHL 15LX15 12 PLY BKSN NUT LUG 5/8-18 X 90 DEG PLT HHCS 1/2-13X4 1/2 GR5 NUT HEX TOP LOCK 1/2-13 PLT DECAL CAUTION TIRE 52PSI/170 PIN 25 X 6.75 HRD PLT PIN 25 X 5.75 HRD PLT HHCS 1/2-13X2 5/8 GR8 SPTHD Shown Shown 02/08/ P

26 Table of Contents Center Gauge Wheel Assembly Part Number Index P /08/18

27 Table of Contents Part Number Index Section 3: Transport Center Gauge Wheel Assembly Ref. Part No. Part Description Comments Revision dwg H C C C C H H H C C C H H C D H C H H C H H C C C C C C C D C C C C C C C D C C D C C ImageNo. GAUGE WHEEL MOUNT HHCS 1-8X12 1/4 GR8 WASHER FLAT 1 SAE WASHER LOSCK SPRING 1 PLT NUT HEX 1-8 PLT GAUGE WHEEL GAUGE WHEEL ARM W/LEVER LH GAUGE WHEEL ARM W/LEVER RH NUT HEX JAM 1-8 PLT NUT HEX 1-8 PLT WASHER FLAT 1 USS PLT CASTER GAGE WHEEL SPRING COVER CASTER GAGE WHEEL TOP COLLAR SPRNG COM 1 13/16ODX3/8WX2 3/4 CASTER INNER PIVOT TUBE GAUGE WHEEL PIVOT HHCS 1-8X10 GR5 PLT CASTER PIVOT ARM WALKING BEAM PIVOT SPINDLE NUT HEX 1 1/2-6 PLT LH GAUGE WHL WALKING BEAM RH GAUGE WHL WALKING BEAM HUB STUD 9/16-18X2 1/8 J1102 HUB 6-BOLT SPINDLE 2X15 Q890 WHEEL 15X8 6 BOLT BUCKSKIN TIRE 11L-15SL 12 PLY TUBELESS TIRE/WHL 11LX15 12PLY 6BLT BKSN NUT LUG 9/16-18 X 90 PLT SLEEVE BEARING 25 ID WALKING BEAM SPACER HHCS 3/4-10X2 GR5 SLEEVE BEARING 1 5/8 I.D. SLEEVE BEARING 2 1/2 ID HHCS 5/16-18X3 1/2 GR 8 NUT HEX TOP LOCK 5/16-18 PLT WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT CASTER INNER PIVOT TUBE WASHER LOCK 1 1/2 PLT HHCS 1-8X7 GR5 CASTER INNER PIVOT TUBE BUSHING CYL 1 1/4 X 1 X 1 DECAL CAUTION TIRE 52PSI/120 Shown Shown 02/08/ P

28 Table of Contents Inside Wing Gauge Wheel Assembly Part Number Index (Applies to 6543UC, 6545UC only) P /08/18

29 Table of Contents Part Number Index Section 3: Transport Inside Wing Gauge Wheel Assembly (Applies to 6543UC, 6545UC only) Ref. Part No. Part Description Comments Revision dwgtp H C C C C H H C C C H H C D H C H H C H H C C C C C C C D C C C C C C C D C C C ImageNo. GAUGE WHEEL MOUNT HHCS 1-8X12 1/4 GR8 WASHER FLAT 1 SAE WASHER LOSCK SPRING 1 PLT NUT HEX 1-8 PLT GAUGE WHEEL ARM GAUGE WHEEL ARM NUT HEX JAM 1-8 PLT NUT HEX 1-8 PLT WASHER FLAT 1 USS PLT CASTER GAGE WHEEL SPRING COVER CASTER GAGE WHEEL TOP COLLAR SPRNG COM 1 13/16ODX3/8WX2 3/4 CASTER INNER PIVOT TUBE GAUGE WHEEL PIVOT HHCS 1-8X10 GR5 PLT CASTER PIVOT ARM WALKING BEAM PIVOT SPINDLE NUT HEX 1 1/2-6 PLT LH GAUGE WHL WALKING BEAM RH GAUGE WHL WALKING BEAM HUB STUD 9/16-18X2 1/8 J1102 HUB 6-BOLT SPINDLE 2X15 Q890 WHEEL 15X8 6 BOLT BUCKSKIN TIRE 11L-15SL 12 PLY TUBELESS TIRE/WHL 11LX15 12PLY 6BLT BKSN NUT LUG 9/16-18 X 90 PLT SLEEVE BEARING 25 ID WALKING BEAM SPACER HHCS 3/4-10X2 GR5 SLEEVE BEARING 1 5/8 I.D. SLEEVE BEARING 2 1/2 ID HHCS 5/16-18X3 1/2 GR 8 NUT HEX TOP LOCK 5/16-18 PLT WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT CASTER INNER PIVOT TUBE WASHER LOCK 1 1/2 PLT BUSHING CYL 1 1/4 X 1 X 1 DECAL CAUTION TIRE 52PSI/120 Shown 02/08/ P

30 Table of Contents Wing Gauge Wheel (Single Wheel) Part Number Index P /08/18

31 Table of Contents Part Number Index Section 3: Transport Wing Gauge Wheel (Single Wheel) Ref. Part No. Part Description Comments Revision dwg H C C C H H C D H C C C H C C H H C C C C C C C C C D H C C ImageNo. GAUGE WHEEL MOUNT HHCS 1-8X12 1/4 GR8 WASHER FLAT 1 SAE WASHER LOCK SPRING 1 PLT NUT HEX 1-8 PLT GAUGE WHEEL ARM GAUGE WHEEL ARM SLEEVE BEARING 1 5/8 ID CASTER INNER PIVOT TUBE CASTER GAGE WHEEL SPRING COVER NUT HEX 1-8 PLT NUT HEX JAM 1-8 PLT WASHER FLAT 1 USS PLT CASTER GAGE WHEEL TOP COLLAR SPRNG COM 1 13/16ODX3/8WX2 3/4 HHCS 1-8X10 GR5 PLT GAUGE WHEEL CASTER RH GAUGE WHEEL CASTER LH HUB 6-BOLT SPINDLE 2X15 Q890 HUB STUD 9/16-18X2 1/8 J1102 NUT HEX TOP LOCK 5/16-18 PLT HHCS 5/16-18X3 1/2 GR8 WHEEL 15X8 6 BOLT BUCKSKIN TIRE 11L-15SL 12 PLY TUBELESS TIRE/WHL11LX15 12PLY 6BLT BKSN NUT LUG 9/16-18 X 90 PLT SLEEVE BEARING 2 1/2 ID CASTER INNER PIVOT TUBE GAUGE WHEEL PIVOT BUSHING CYL 1 1/4 X 1 X 1 DECAL CAUTION TIRE 52PSI/120 Shown 02/08/ P

32 Table of Contents Slide in Hubs & Spindles Part Number Index P /08/18

33 Table of Contents Part Number Index Section 3: Transport Slide in Hubs & Spindles Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C C C D C C C C D C C C C C C D C C C C C C C C Image No. GREASE CAP 448X12X.25 NUT HEX SLOTTED 7/8-14 PLT PIN COTTER 5/32X1 1/2 LONG WASHER SPINDLE - 7/8 BEARING CONE LM BEARING CUP LM NUT LUG 9/16-18 X 90PLT HUB STUD 9/1618X2 1/8 J1102 HUB 890W CUPS 6-BOLTS 6" BC BRG CUP 89ODX.58WD #LM BRG CONE 62IDX.78WD #LM SEAL GREASE 875X3.000X0.313 AXLE SPINDLE 2X12 1/2 (Q783) HUB 6-BOLT SPINDLE 2X GREASE CAP X.28 NUT HEX SLOTTED 1-14 PIN COTTER 3/16 X 1 3/4 PLT 1 HARDENED SPINDLE WASHER NUT LUG 5/8-18 X 90 DEG PLT HUB 608 W/CUPS 8-BOLTS 8" BC HUB STUD 5/8-18X2 1/2 GR5 BRG CONE 16ID JLM BRG CUP 3.54OD JLM ESP SEAL KSLY NCO AXLE SPINDLE 75X15.5 Q45-8B HUB 8-BLT SPNDL 75X SPINDLE 75 X SEAL GREASE 750X003X0.300 BEARING CONE 387-AS BRG CUP 3.81D 382A HEAVY 8-BOLT HUB BEARING CONE 387-AS 8 BOLT HUB SPINDLE ASM /08/ P

34 Table of Contents Depth Control Assembly Part Number Index P /08/18

35 Table of Contents Part Number Index Section 4: Hydraulics Depth Control Assembly Ref. Part No. Part Description Comments Revision dwg H C C C C H C C C C D H C C C C ImageNo. DEPTH STOP TUBE HHCS 5/16-18X2 GR5 RHSNB 5/8-11X3 GR5 WASHER FLAT 1/2 HARD ASTMF436 SPRING COMP.75OD.12W 63LG DEPTH STOP END WASHER LOCK SPRING 5/16 PLT HYD VALVE DEPTH CONTROL CROSS NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT DEPTH STOP ROD 1/2" THREADED DEPTH STOP BRACKET HHCS 1/2-13X2 1/2 GR5 HHCS 1/2-13X2 3/4 GR5 NUT HEX TOP LOCK 1/2-13 PLT PL 3/4MORB 02/08/ P

36 Table of Contents Hydraulic Lift & Fold System - Hitch Part Number Index P /08/18

37 Table of Contents Part Number Index Section 4: Hydraulics Hydraulic Lift & Fold System - Hitch Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C C C C D C C C C C C C ImageNo. CP 3/4FORM MALE QD POPPET TYPE AD 3/4MORB 3/4FORB (HG) HG HANDLE - BLACK EXT HG HANDLE - BLACK RET HH1/2R /4FJIC 3/4MORB EL 45 3/4MORB 3/4MJIC REBOUND VALVE 20 GPM AD 3/4MORB 3/4MJIC HH1/2R /4FJIC AD 3/4MJIC BLKHD WITH LN HH3/8R /4FJIC 3/4MORB HG HANDLE - GREEN EXT HG HANDLE - GREEN RET HOSE WRAP, LARGE SIZE, SHORT (8") STAUFF CLAMP BODY - 3D STAUFF STACKING BOLT - 3D STAUFF LOCK PLATE - 2-3D STAUFF CLAMP BODY - 2D STAUFF STACKING BOLT - 2D STAUFF COVER PLATE GROUP 2D HHCS 5/16-18X1 1/2 GR5 02/08/ P

38 Table of Contents Hydraulic Fold System Part Number Index P /08/18

39 Table of Contents Part Number Index Section 4: Hydraulics Hydraulic Fold System Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C D C C D C C C C C C C C C C C C C C C C C C C C C C C C C C C Image No. AD 3/4MJIC BLKHD WIT LN TE 3/4MJIC RUN BLKHD W/LN AD 3/4MORB 3/4MJIC TE 3/4MJIC 3/4MJIC 3/4FJIC MANI ASSY WHEEL RETRACT CNTR HH3/8R /4FJIC HH3/8R /4FJIC HH3/8R /4FJIC EL 3/4MJIC 3/4MORB DOUBLE HYD TEE BLOCK TE 3/4MORB 3/4MJIC 3/4MJIC EL 3/4FJIC 3/4MJIC ORIFICE PLATE 1/16 3/4 EL 3/4MJIC BLKHD 45 W/ LN CYL 4X30X50 ROD (TIE)SFTCLOSE CYL 4X24X50 ROD (TIE)SFTCLOSE HH3/8R /4FJIC 3/4FJIC HH3/8R /4FJIC HH3/8R /4FJIC HH3/8R /4FJIC HH3/8R /4FJIC HH3/8R /4FJIC HH3/8R /4FJIC HH3/8R /4FJIC HH3/8R /4FJIC HH3/8R /4FJIC HH3/8R /4FJIC HH3/8R /4FJIC HH3/8R /4FJIC HH3/8R /4FJIC HHCS 5/16-18X3 1/2 GR5 WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT STAUFF CLAMP BODY - 3D STAUFF STACKING BOLT - 3D STAUFF LOCK PLATE - 2-3D STAUFF CLAMP BODY - 2D STAUFF STACKING BOLT - 2D STAUFF COVER PLATE GROUP 2D HHCS 5/16-18X1 1/2 GR5 Models 6543 & 6545 Only Also used on wings for Models 6539 & 6541 Used in All Rod End of Cylinders Only Runs thru the top hose tray Runs thru the top hose tray Models 6539 & 6541 Only Routes from inside bulkhead fitting to Base end of the Cylinder Models 6543 & 6545 Only Routes from inside bulkhead fitting to Base end of the Cylinder Models 6539 & 6541 Only Routes from outside bulkhead fitting to Rod end of the Cylinder Models 6543 & 6545 Only Routes from outside bulkhead fitting to Rod end of the Cylinder Models 6539 & 6541 Only Models 6543 & 6545 Only 02/08/ P

40 Table of Contents Hydraulic Lift System - Center Part Number Index P /08/18

41 Table of Contents Part Number Index Section 4: Hydraulics Hydraulic Lift System - Center Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C C C C C C C C C D C C C C C C C C C C C C C C H ImageNo. AD 3/4MJIC BLKHD WITH LN HH1/2R /4FJIC EL 45 3/4MORB 3/4MJIC HYD VALVE DEPTH CONTROL CROSS HHCS 5/16-18X2 GR5 EL 3/4MJIC 3/4MORB HH1/2R /4FJIC HH1/2R /4FJIC HH1/2R /4FJIC HH3/8R /4FJIC EL 3/4MJIC BLKHD 45 HHCS 5/16-18X1 1/2 GR5 HHCS 5/16-18X1 3/4 GR5 HHCS 5/16-18X2 1/4 GR5 HHCS 5/16-18X3 1/2 GR5 CYL REP 25X10X50 ROD (TIE) HH1/2R /4FJIC HH1/2R /4FJIC PL 3/4MORB HOSE WRAP, LARGE SIZE, SHORT (8") TE 3/4MORB 3/4MJIC 3/4MJIC HH1/2R /4FJIC HH3/8R /4FJIC TE 3/4MJIC RUN BLKHD W/ LN HH1/2R /4FJIC AD 3/4MORB 3/4MJIC MANI ASSY WHEEL RETRACT CNTR MANI ASSY WHEEL RETRACT WING STAUFF CLAMP BODY - 3D STAUFF STACKING BOLT - 3D STAUFF LOCK PLATE - 2-3D STAUFF CLAMP BODY - 2D STAUFF COVER PLATE GROUP 3D STAUFF COVER PLATE GROUP 2D STAUFF BOLT ON MNT - UC Bottom bulkhead fittings Routes to bottom bulkhead fitting Routes to top bulkhead fitting Routes from center-bottom bulkhead fitting to base end of lift cylinder Routes from center - top bulkhead fitting to wheel retract solenoid port 4 Depending how many clamps are in the stack Depending how many clamps are in the stack Depending how many clamps are in the stack Depending how many clamps are in the stack See center frame assembly for location and hardware 02/08/ P

42 Table of Contents Hydraulic Lift System - Wings Part Number Index P /08/18

43 Table of Contents Part Number Index Section 4: Hydraulics Hydraulic Lift System - Wings Ref. Part No. Part Description Comments Revision dwg43863 dwg C C C C C C C C C C C C C C D D C C C C C C C C C C C C C C C C C C C C C C C C D D C C C C C C C C C C D D C C ImageNo. ImageNo. HH1/2R /4FJIC HH1/2R /4FJIC HH1/2R /4FJIC HH1/2R /4FJIC HH1/2R /4FJIC HH1/2R /4FJIC HH1/2R /4FJIC HH1/2R /4FJIC HH1/2R /4FJIC HH1/2R /4FJIC HH1/2R /4 FJIC HH1/2R /4 FJIC HH1/2R /4FJIC HH1/2R /4FJIC HOSE WRAP, LARGE SIZE, SHORT (8") HOSE WRAP, LARGE SIZE, SHORT (8") TE 3/4MJIC RUN BLKHD W/ LN TE 3/4MJIC RUN BLKHD W/ LN EL 3/4MJIC BLKHD 45 EL 3/4MJIC BLKHD 45 CYL REP 4X10X38 ROD (TIE) CYL REP 4X10X38 ROD (TIE) EL 45 3/4MORB 3/4MJIC EL 45 3/4MORB 3/4MJIC EL 3/4MJIC 3/4MORB EL 3/4MJIC 3/4MORB STAUFF CLAMP BODY - 2D STAUFF CLAMP BODY - 2D STAUFF CLAMP BODY -3D STAUFF CLAMP BODY -3D STAUFF COVER PLATE GROUP 2D STAUFF COVER PLATE GROUP 2D STAUFF COVER PLATE GROUP 3D STAUFF COVER PLATE GROUP 3D HHCS 5/16-18X1 3/4 GR5 HHCS 5/16-18X1 3/4 GR5 HHCS 5/16-18X2 1/4 GR5 HHCS 5/16-18X2 1/4 GR5 HHCS 5/16-18X3 1/2 GR5 HHCS 5/16-18X3 1/2 GR5 HOSE TRAY CAP HOSE TRAY CAP RHSNB 5/16-18X2 GR5 RHSNB 5/16-18X2 GR5 NUT HEX TOP LOCK 5/16-18 PLT NUT HEX TOP LOCK 5/16-18 PLT CYL REP 3.75X10X38 ROD (TIE) CYL REP 3.75X10X38 ROD (TIE) AD 3/4MJIC BLKHD WITH LN AD 3/4MJIC BLKHD WITH LN RHSNB 5/16-18X3 GR5 FTHD RHSNB 5/16-18X3 GR5 FTHD HOSE TRAY CAP HOSE TRAY CAP EL 3/4MJIC BLKHD W/ LN EL 3/4MJIC BLKHD W/ LN Models 6539 & 6541 Models 6539 & 6541 Models 6543 & 6545 Models 6543 & 6545 Models 6539 & 6541 Models 6539 & 6541 Models 6543 & 6545 Models 6543 & 6545 Inside Wings Inside Wings Outside Wings Outside Wings 02/08/ P

44 Table of Contents Part Number Index Hydraulic Lift System - Wings (continued) Ref Part No C C Part Description STAUFF LOCK PLATE - 2-3D STAUFF LOCK PLATE - 2-3D Comments Revision P /08/18

45 Table of Contents Part Number Index Section 4: Hydraulics Hydraulic Lift System - Wings (continued) This Page Intentionally Left Blank 02/08/ P

46 Table of Contents Part Number Index Hydraulic Cylinder ( C 4X10X38 ROD) P /08/18

47 Table of Contents Part Number Index Section 4: Hydraulics Hydraulic Cylinder ( C 4X10X38 ROD) Ref. Part No. Part Description Comments Revision dwg M7016-ADI 2M6816 3R5840 3R5812 4R5109 5R5118 6R5164-ADI 7M6318 2A0024 2A C C C C C Image No. MIDWAY HARDENED CLEVIS ADI MW ROD 1 3/8 DIA MW HEAD MW HEAD MW PISTON MIDWAY TUBE MIDWAY ADI BASE MW TIE ROD 4 X 10 CYLINDER MW WIPER SEAL U-CUP O-RING MIDWAY BACK UP MIDWAY TEFLON SEAL LOADER WEAR RING O-RING MW PISTON NUT 1-14 MW TIE ROD NUT NUT HEX 3/8-16 PLAIN HHCS 3/8-16X1 3/4 GR5 SEAL KIT MW 4 RPH CYL 4A5103 PIN CLEVIS 1 X 3 1/8 USABLE PIN COTTER 3/16 X 2 Replaced by 3R5840 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Rev. 2 Rev. 1 02/08/ P

48 Table of Contents Part Number Index Hydraulic Cylinder ( C 3.75X10X38 ROD) P /08/18

49 Table of Contents Part Number Index Section 4: Hydraulics Hydraulic Cylinder ( C 3.75X10X38 ROD) Ref. Part No. Part Description Comments Revision dwg M7016-ADI 2M6816 3R4840 3R4812 4R4109 5R4118 6R4164-ADI 7M6318 2A0024 2A C C C C C Image No. MIDWAY HARDENED CLEVIS ADI MW ROD 1 3/8 DIA MW HEAD MW HEAD PISTON MIDWAY MIDWAY TUBE MIDWAY ADI BASE MW TIE ROD 4 X 10 CYLINDER MW WIPER SEAL U-CUP O-RING MIDWAY BACK UP MIDWAY TEFLON SEAL LOADER WEAR RING O-RING MW PISTON NUT 1-14 MW TIE ROD NUT NUT HEX 3/8-16 PLAIN HHCS 3/8-16X1 3/4 GR5 SEAL KIT MW 3.75X375 4A4103 PIN CLEVIS 1 X 3 1/8 USABLE PIN COTTER 3/16 X 2 Replaced by3r4840 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Rev. 2 Rev. 1 02/08/ P

50 Table of Contents Part Number Index Hydraulic Cylinder ( C 25X10X50 ROD) P /08/18

51 Table of Contents Part Number Index Section 4: Hydraulics Hydraulic Cylinder ( C 25X10X50 ROD) Ref. Part No. Part Description Comments Revision dwg M7021-ADI 2S7516NC 3R6940 4R6109 5R6118 6R6164-ADI 7M7318 2A C C C C C C Image No. MW ROD CLEVIS 00PN 5-12THD MIDWAY ROD MW HEAD PISTON MIDWAY MIDWAY TUBE MIDWAY ADI BASE MIDWAY TIE ROD F/ 4 1/4 X 10 MW WIPER U-CUP O-RING MIDWAY BACK UP MIDWAY TEFLON SEAL LOADER WEAR RING MW PISTON NUT SEAL MW PISTON NUT 1-14 NUT HEX 3/4-16 PLAIN NUT HEX 3/8-16 PLAIN HHCS 3/8-16X1 3/4 GR5 SEAL KIT MW 25 RPHCYL 4A6104 PIN CLEVIS 1 X 3 1/8 USABLE PIN COTTER 3/16 X 2 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Only in item 20 02/08/ P

52 Table of Contents Part Number Index Hydraulic Cylinder Soft Close ( C 4X24X50 ROD) P /08/18

53 Table of Contents Part Number Index Section 4: Hydraulics Hydraulic Cylinder Soft Close ( C 4X24X50 ROD) Ref. Part No. Part Description Comments Revision dwgtp M7021-ADI 2S6589NC 3R5412 4M6108 5M6244 6R5180 7M6445 2A0024 2A C C C C C C Image No. MW ROD CLEVIS 00PN 5-12THD MIDWAY ROD MIDWAY HEAD MW PISTON MW TUBE 5 X 30 CYLINDER MIDWAY ADI BASE MW TIE ROD 5 X 30 CYLINDER MW WIPER U-CUP O-RING MIDWAY BACK UP MIDWAY CROWN SEAL MIDWAY MW PISTON NUT SEAL MW PISTON NUT MW TIE ROD NUT NUT HEX 3/8-16 PLAIN HHCS 3/8-16X1 3/4 GR5 CYL SEAL KIT C-5A6104 PIN CLEVIS 1 X 3 1/8 USABLE PIN COTTER 3/16 X 2 DECAL NOTICE SOFT CLOSE CYL Only in item 18 Only in item 18 Only in item 18 Only in item 18 Only in item 18 Only in item 18 Applied to base end of Cylinder Tube 02/08/ P

54 Table of Contents Part Number Index Hydraulic Cylinder Soft Close ( C 4X30X50 ROD) P /08/18

55 Table of Contents Part Number Index Section 4: Hydraulics Hydraulic Cylinder Soft Close ( C 4X30X50 ROD) Ref. Part No. Part Description Comments Revision dwgtp M7021-ADI 2S6599NC 3R5412 4M6108 5M6249 6R5180 7M6450 2A0024 2A C C C C C C Image No. MW ROD CLEVIS 00PN 5-12THD MIDWAY ROD MIDWAY HEAD MW PISTON MW TUBE 4 X 30 CYLINDER MIDWAY ADI BASE MW TIE ROD MW WIPER U-CUP O-RING MIDWAY BACK UP MIDWAY CROWN SEAL MIDWAY MW PISTON NUT SEAL MW PISTON NUT MW TIE ROD NUT NUT HEX 3/8-16 PLAIN HHCS 3/8-16X1 3/4 GR5 CYL SEAL KIT C-5A6104 PIN CLEVIS 1 X 3 1/8 USABLE PIN COTTER 3/16 X 2 DECAL NOTICE SOFT CLOSE CYL Only in item 18 Only in item 18 Only in item 18 Only in item 18 Only in item 18 Only in item 18 Applied to base end of Cylinder Tube 02/08/ P

56 Table of Contents Spring Shank Assembly Part Number Index P /08/18

57 Table of Contents Part Number Index Section 5: Shanks Spring Shank Assembly Ref. Part No. Part Description Comments Revision dwg C D C C C C C D C H D C H C D C D C C C C C C C H C C C C C C C C C C C C S ImageNo. SHANK CHISEL 1 1/4X2X25 1/2 UPRIGHT SIDE PLATE SLEEVE BEARING 25 ID X 5 L HHCS 1/2-13X3 GR5 SPTHD PLT WAHSER FLAT 1/2 HARD ASTMF436 NUT HEX TOP LOCK 1/2-13PLT HHCS 5/8-11X4 1/2 GR5 SHANK BOLT SPACER NUT HEX TOP LOCK 5/8-11 PLT SPRING GUIDE CUP WASHER SPRING COMP 3.13OD.63W 10LG SPRING CAP HHCS 1-8X7 GR5 SHANK UPRIGHT HHCS 3/4-10X5 1/2 GR5 TUBE RND 1 1/4 OD WASHER 3/4 HARDENED STEEL WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT NUT HEX 3/4-10 PLAIN HHCS 5/8-11X2 GR8 WASHER FLAT 5/8 HARD ASTMF436 CHISEL UPRIGHT CAST CLAMP CHISEL POINT WINGED 5/8X2X15 CHISEL POINT 5/8X2X15 TWISTED SHOVEL 1/2X4X26 RH TWISTED SHOVEL 1/2X4X26 LH TWISTED SHOVEL 1/2X3X23 RH TWISTED SHOVEL 1/2X3X23 LH SWEEP 12" REGULAR SWEEP 12' HARDFACED SWEEP 16" REGULAR SWEEP 16" HARDFACED PLOW 1/2-13X2 1/2 GR5 NUT HEX TOP LOCK 1/2-13 PLT WASHER FLAT 1/2 USS PLT SHANK ASSY ULTRA CHISEL Replaced by C Used on all models Used on all models Used on 12" spacing Used on 12" spacing Used on 9" spacing Used on 9" spacing Used on 9" spacing Used on 9" spacing Used on 12" spacing Used on 12" spacing Includes items /08/ P

58 Decals Table of Contents Part Number Index P /08/18

59 Decals Table of Contents Part Number Index Section 6: Decals Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C C C C C C C C C C C C C ImageNo. DECAL CAUTION GENERAL 4X5 DECAL DANGER CRUSHING HAZARD DECAL WARNING TONGUE RISING DECAL WARNING HYD PRESS LONG DECAL GP&LOGO HARVEST/3X20 STR DECAL WARNING HAND CRUSHING ULTRA CHISEL DECAL UC DECAL UC DECAL UC DECAL UC DECAL REFLECTOR AMBER 2X9 DECAL WARNING OVERHEAD WING DECAL REFLECTOR ORANGE 2X9 DECAL REFLECTOR RED 2X9 DECAL NOTICE TRANSPORT LOCKS DECAL DANGER ELECTRUTION HA MANUAL PAK 1" W/ GASKET I.D. PLATE DECAL GP PLANTING COMPONENTS DECAL WARNING WINGS COULD FALL DECAL FLAG 02/08/ P

60 Table of Contents 5 Row Spike HR Drag Assembly Part Number Index P /08/18

61 Table of Contents Part Number Index Section 7: Attachments 5 Row Spike HR Drag Assembly Ref. Part No. Part Description Comments Revision dwg H H C D D D D D C D H H H C C C C C C C C C C C C C C C C C C ImageNo. CARRIER ARM (5HR/7 ROW) DRAG ARM EXTENSION 8" HHCS 3/4-10X2 GR5 1/4" ANGLE, 7 HOLE, 59 1/4" ANGLE, 8 HOLE, 68 1/4" ANGLE, 9 HOLE, 77 1/4" ANGLE, 10 HOLE, 86 1/4" ANGLE, 11 HOLE, 95 SPIKE TOOTH SQ 3/4X14 BAR BRACKET DOUBLE BAR BRACKET LINK HR SPIKE HARROW FRONT DRAG LINK ASSEMBLY 5/16" PULL CHAIN (25 LINK) 5/16" HANG CHAIN (15 LINK) U-BOLT 3/4-10 X 4 1/32 X 5 3/4 NUT HEX 3/4-10 PLT WASHER LOCK SPRING 3/4 PLT RHSNB 5/8-11X2 7/8 SPL NUT HEX TOP LOCK 5/8-11 PLT HHCS 1/2-13X1 1/2 GR5 HHCS 1/2-13X2 1/2 GR5 NUT HEX WHIZ 1/2-13 HHCS 7/16-14X1 1/2 GR5 WASHER FLAT 7/16 USS PLT NUT HEX NYLOCK 7/16-14 PLT U-BOLT 3/8-16 X 1 1/8 3-CORNER HHCS 3/8-16X1 1/4 GR5 HHCS 3/8-16X2 1/2 GR5 NUT HEX TOP LOCK 3/8-16 PLT DECAL REFLECTOR AMBER 2X9 Models Models " Models Models " Models Used on the center section outside carrier arms only 02/08/ P

62 Table of Contents 3 Row Heavy Coil Tine Assembly Part Number Index P /08/18

63 Table of Contents Part Number Index Section 7: Attachments 3 Row Heavy Coil Tine Assembly Ref. Part No. Part Description Comments Revision dwg H C C C C C C C H C C C C C C V C H H L D D D H H C C D C H C C C D D C H D D H C C K K H C C C K ImageNo. COILTINE MOUNT BRACKET U-BOLT 3/4-10 X 4 1/32 X 5 3/4 WASHER MACH 5 X 00 X.075 SNAP RING EXT 1 HEAVY PIN - SNAP RING 1 X 5.75 USABLE WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT HHCS 1/2-13 X 3 1/4 GR5 PARALLEL LINK U-BOLT 5/8-11 X 3 1/32 X 4 1/4 GR5 WASHER LOCK SPRING 5/8 PLT HHCS 1/2-13X4 1/2 GR5 FTHD WASHER FLAT 1/2 HARD ASTMF436 NUT HEX 5/8-11 PLT NUT HEX 1/2-13 PLT HEAVY SPRING/PLUG SUB ASSY NUT HEX TOP LOCK 1/2-13 PLT PARALLEL LINK PARALLEL LINK BRACKET COILTINE DRAG ARM ASSY 24" COILTINE 3-TINE TUBE 24" COILTINE 4-TINE TUBE 24" COILTINE 5-TINE TUBE DRAG FRAME 26 DRAG FRAME 50 HHCS 1/2-13 X 3 1/2 GR5 SNAP RING 2 3/4 BUSHING - 91 ID NUT HEX TOP LOCK 5/8-11 PLT COILTINE 24 PIVOT BRACKET WASHER FLAT 3/4 SAE PLT SHOULDER BOLT 5/8-11 X 1 3/4 SPL COILTINE 24 X 12 X 9/16 ADJUSTMENT STRAP 3/4 LONG X 1/2 TINE STOP/SPACR RHSNB 1/2-13X4 GR5 PLT COILTINE PIVOT ADJUSTER TUBE RND - 2" OD TUBE RND - 2 3/8" OD 24" COILTINE SINGLE-TINE EXT. COILTINE 24 X 9/16 SINGLE LH COILTINE 24 X 9/16 SINGLE RH 24" COILTINE EXT LH 24" COILTINE EXT RH COIL TINE DRAG FRAME EXT HHCS 5/8-11X3 1/4 GR5 NUT HEX 5/8-11 PLT WASHER LOCK SPRING 5/8 PLT DRAG FRAME EXT KIT Includes Items 1-19 Models 6539 & 6541 Models Models 6543 & 6545 Models Models Includes Items 35 & 36 Includes items 17, 32-33, 37 & 40 Used on Models 6539 & 6541 Includes items 17, 32-33, 37 & 41 Used on Models 6539 & 6541 Models Includes Items /08/ P

64 Reel Assembly Table of Contents Part Number Index P /08/18

65 Reel Assembly Table of Contents Part Number Index Section 7: Attachments Ref. Part No. Part Description Comments Revision dwg D D D D D D D C C C D C H H H H C C C C C D C C H C C C C C C H H H C C C C S S S S S S S S Image No. PART - 5' REEL PART - 6' REEL PART - 7' REEL PART - 9' REEL PART -10' REEL PART - 11' REEL PART - 8' REEL U-BOLT 5/8-11X2 17/32X3 1/2 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT REEL MOUNTING BRACKET RHSNB 1/2-13X1 1/2 GR5 7' HD REEL 3 1/2' HD REEL 5' HD REEL 6' HD REEL BEARING FLG 1 1/2ID 5 IN SQ WASHER FLAT 1/2 SAE PLT NUT HEX TOP LOCK 1/2-13 PLT HHCS 1-8X4 GR5 WASHER FLAT 1 SAE PLT REEL BRG SPACER WASHER LOCK SPRING 1 PLT NUT HEX 1-8 PLT DRAG ARM REGULAR U-BOLT 3/4-10 X 4 1/32 X 5 WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT POLYURETHANE BUMPER HHCS 5/16-18X1/2 GR5 WASHER FLAT 5/16 SAE PLT REEL MOUNTING ARM EYE BOLT SPRING BOLT TIGHTENER SPRING COMP 5ODX1OLX.406W HHCS 3/4-10X4 GR5 NUT HEX TOP LOCK 3/4-10 PLT HHCS 5/8-11X4 GR5 REEL 5 FT ASSEMBLY REEL 6 FT ASSEMBLY REEL 7 FT ASSEMBLY REEL 8 FT ASSEMBLY REEL 9 FT ASSEMBLY REEL 10 FT ASSEMBLY REEL 11 FT ASSEMBLY REEL 9 FT ASSEMBLY LH Models 6539 Models Models 6545 Models Models Models Models 6541 Includes items 1-15 & 29 Models 6539 Includes items 1-15 & 29 Models Includes items 1-15 & 29 Models 6545 Includes items 1-15 & 29 Models 6541 Includes items 1-15 & 29 Models Includes items 1-15 & 29 Models Includes items 1-15 & 29 Models Includes items 1-15 & 29 Models /08/ P

66 Rear Hitch Table of Contents Part Number Index P /08/18

67 Rear Hitch Table of Contents Part Number Index Section 7: Attachments Ref. Part No. Part Description Comments Revision dwg H H A C C C C C C C H C C H C C C H A H H C C C Image No. UC WIDE REAR HITCH REAR HITCH CROSS TUBE BOLT ON EZ HITCH RIGID TONGUE U-BOLT 5/8-11 X 3 1/32 X 4 1/2 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT U-BOLT 5/8-11 X 4 1/32 X 5 3/4 U-BOLT 3/4-10 X 4 1/32 X 5 3/4 WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT E-Z HITCH RIGID SLIDE HHCS 3/4-10X1 1/2 GR5 NUT HEX JAM NYLOCK 3/4-10 PLT BOLT-ON SLEEVE ONLY WASHER FLAT 7/8 ASTM F436 PLT SPRING COMP 22ODX.115X3.25L PIN COTTER 3/16 X 2 E-Z HITCH T HANDLE BOLT ON EZ HITCH FLEX TONGUE E-Z HITCH FLEX SLIDE E-Z HITCH TONGUE ASSEMBLY HHCS 1-8X7 GR5 NUT HEX LOCK 1-8 PLT DECAL REFLECTOR AMBER 2X9 Includes items Includes items & /08/ P

68 Table of Contents Rear Hitch Accessories Part Number Index P /08/18

69 Table of Contents Part Number Index Section 7: Attachments Rear Hitch Accessories Ref. Part No. Part Description Comments Revision dwg C C C C C C D C C C C C C C C C C C C C C c Image No. CP 3/4FORB QD FEMALE (POPPET) SNAP RING EXT 1 1/2 SHAFT HHCS 5/16-18X1 1/4 GR5 WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT U-BOLT 1/2-13X3 1/32X4 AUX HOSE HOLDER WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT HOSE CLAMP 3/8 ID HHCS 5/16-18X1 1/2 GR5 STAUFF CLAMP BODY - 2D STAUFF COVER PLATE GROUP 2D DUAL MACHINE HARNESS - LED HH3/8R /4FJIC 3/4MORB LIGHT HRNSS ENHANCE MODULE LED LIGHT HARNESS, 30' LEAD - LED CP 3/4FORB MALE QD POPPET TYPE AD 3/4MORB 3/4FORB (HG) HG HANDLE - YELLOW EXT HG HANDLE - YELLOW RET HH3/8R /4FJIC 3/4MORB C & C not shown Used on center frame along with other Stauff clamps Attached to Tractor Plug Used on C at Hitch Used on C at Hitch Used on C at Hitch Used on C at Hitch Used on the Hitch and connects to bulkhead fittings on front of center frame 02/08/ P

70 Table of Contents Part Number Index Part Number Index The Part Number Index is a numeric index of all part numbers included in this manual. The index shows what page(s) the part is used on. Part Number Page Part Number Page Part Number Page Part Number Page D D M7016-ADI...47, 49 1M7021-ADI...51, 53, 55 2A , 49, 53, 55 2A , 49, 51, 53, 55 2M , 49 2S6589NC S6599NC S7516NC R R R , 55 3R R R M , 55 4R R R H D D H H D D V D H H H...27, 29, D...23, 25, 27, D D D D D D D H H H H H H D D D...27, 29, D...27, 29, D D H H S...11, 13, 15, S...11, 13, 15, H H...27, 29, H...29, H...29, H H H H H H H...17, H H H H S...11, 13, H H H...17, H H H...11, H...11, H...11, 13, H...27, H...27, H...27, H...27, H H H H H H...17, H...17, H H...17, H...17, H H H S H H H H H H H H H H D H D H D...17, H D H H H...13, H...13, H H H H H H H H H H H H H H H H H D H D D H...9, D D D D D L H D K K H K H H D D...11, 13, 15, D...11, 13, 15, H D H H H H H D D D D D D D D D...37, 41, D D D D D D H H...27, 29, H...27, 29, H H H H H H H H H D V D D D S S S S S S S S A A M M R R R R4164-ADI R5164-ADI R , 55 6R6164-ADI M , 49 7M M M C C... 11, 13, 15, 17, 19, C...13, C C C C C C...37, 39, 41, C...41, C C...47, 49, 51, 53, C C C C... 9, 11, 13, 15, 27, 29, C C C...11, C C...27, 57, C C C C C C C...35, C...35, C...41, C C C C C...23, C C C...17, 19, C C C C C C C...39, 41, C C C...23, C...27, 29, C C C...11, C C...27, C C P /08/18