Parts Manual. 30' 3-Section Folding Drill S-3000 & 3S-3000F. Copyright 2018 Printed 06/06/ P

Transcription

1 Table of Contents Part Number Index Parts Manual 3S-3000 & 3S-3000F 30' 3-Section Folding Drill Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! Cover illustration may show optional equipment not supplied with standard unit. Copyright 2018 Printed 06/06/ P

2 Table of Contents Table of Contents Part Number Index Section 1: Introduction...6 Using This Manual...6 Manual Replacement Information...6 Manual Revisions...6 Touch-up Paint...6 Hardware Legend...7 Replacement Hardware...7 Serial Numbers...7 Part Number Service Coding...7 Tongue And Mainframe...8 Hitch To Tongue...8 Transport Hook To Tongue...10 Mainframe To Tongue...12 Transport Axle...14 Transport Axle To Mainframe...14 Transport Tires & Hub...16 Tool Bars...18 Toolbar To Mainframe...18 Toolbar Pivots To Toolbars (S/N S1194-)...20 Toolbar Pivots To Box Frames...22 Box and Box Frames...24 Center Box And Center Frame To Mainframe...24 Center Box And Center Frame To Mainframe Fertilizer...26 Wing Box To Wing Frame...28 Wing Box To Wing Frame Fertilizer...30 Lid To Box...32 Lid To Box Fertilizer...34 Box Divider Fertilizer...36 Seed/Fertilizer Flap ( S)...38 Spill Flap Fertilizer ( S)...40 Fertilizer Tray To Box...42 Fertilizer Tray...44 Seed Level Indicator...46 Lights (S/N S2966-)...48 Lights (S/N S S3495)...50 Lights (S/N S3496+)...52 Weight Bracket (S/N S1869-)...54 Weight Bracket (S/N S1870+)...56 Point Row Control Box With Cables...58 Walkboard, Step And Parking Stand To Box Frame (S/N S2030-)...60 Walkboard, Step And Parking Stand To Box Frame (S/N S2031+)...62 Right Hand And Left Hand Subframes To Box Frames...64 Center Subframe To Box Frame...66 Feeder Cup Channels...68 Seed Rate Adjustment Handle " Feeder Cup Spacing /2" Feeder Cup Spacing " Feeder Cup Spacing...74 Vansco Shaft Monitor (Option)...76 Loup Shaft Monitor (2 Channel A) (3 Channel A)...78 Calibration Tray and Scale...80 Gauge Wheels...82 Dual Gauge Wheel (S/N S3199-)...82 Dual Gauge Wheel (S/N S3200+)...86 Single Gauge Wheel...88 Drives...91 Right Hand Drive (S/N S1021-)...92 Right Hand Drive (S/N S S/N S1562)...94 Right Hand Drive (S/N S1563+)...96 Right Hand Fertilizer (S/N S1562-)...98 Right Hand Fertilizer (S/N S1563+) Right Hand Drive Fertilizer (Continued) Right Hand Drive Point Row (Option) (S/N S1562-) Right Hand Drive Point Row (Option) (S/N S1563+) Center Drive Center Drive (Continued) (S/N S1021-) Center Drive (Continued) (S/N S S/N S1562) Center Drive (Continued) (S/N S1563+) Center Drive Fertilizer (S/N S1562-) Center Drive Fertilizer (S/N S1563+) Center Drive Point Row (Option) (S/N S1562-) Center Drive Point Row (Option) (S/N S1563+) Left Hand Drive (S/N S1562-) Left Hand Drive (S/N S1563+) Left Hand Drive Fertilizer (S/N S1562-) Left Hand Drive Fertilizer (S/N S1563+) Fertilizer Drive Subassy ( S) Clutch Linkage Jaw Clutch S/N Jaw Clutch S/N (Includes Fertilizer Drills) Right Hand Wing Clutch Fertilizer ( K) Left Hand Wing Clutch Fertilizer ( K) Openers Series Long Arm Opener Series Short Arm Opener Fertilizer Hose " & 6" Seed-Lok (Option) ( K & K) Press Wheels " x 12" Double "V" Press Wheel " x 13" Single Press Wheel " x 13" Single Press Wheel " x 14" Peaked Single Press Wheel " x 12" Double Ribbed Single Press Wheel Hydraulics Fold Hydraulics Copyright 2018 All rights reserved Printed 06/06/18 Great Plains Manufacturing, Inc. provides this publication as is without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. Great Plains Manufacturing, Incorporated Trademarks The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains All other brands and product names are trademarks or registered trademarks of their respective holders. Printed in the United States of America P /06/18

3 Table of Contents Part Number Index Table of Contents (continued) Transport Axle And Transport Hook Lift Hydraulics (S/N S1283-) Transport Axle And Transport Hook Lift Hydraulics (S/N S1283+) Opener Down Pressure Hydraulics (Closed Center) (S/N S1699-) Opener Down Pressure Hydraulics (Closed Center) (S/N S1700+) Opener Down Pressure Hydraulics With Point Row (Option) (S/N S1699-) Opener Down Pressure Hydraulics With Point Row (Option) (S/N S1700+) Opener Down Pressure Hydraulics (Open Center) (S/N S1699-) Opener Down Pressure Hydraulics (Open Center) (S/N S1700+) Double Selector Valve Mounting Hydraulic Cylinder 2 x 8 x 12 ( C) Transport Hook Midway Hydraulic Cylinder 3.5 x 8 x 25 ( C) Transport Hook Monarch Hydraulic Cylinder 3.5 x 8 x 25 ( C) Transport Hook Cross Hydraulic Cylinder 3.5 x 8 x 25 ( C) Toolbar Fold Midway Hydraulic Cylinder 3.5 x 20 x 5 ( C) Transport Axle Midway Hydraulic Cylinder 3.5 x 12 x 25 ( C) Pressure Reducing Valve ( C) Manifold Block ( C) (Option) Hydraulic Hose Grips Decals Decal Placement (S/N S3495-) Decal Placement (S/N S3496+) Markers Flat Fold Marker Marker Disc Assembly ( S) Single Marker Hydraulics Dual Markers Hydraulics Midway Hydraulic Cylinder 5 x 20 x 12 ( C) Monarch Hydraulic Cylinder 5 x 20 x 12 ( C) Cross Hydraulic Cylinder 5 x 20 x 12 ( C).218 Double Selector Valve ( C) Sequence Valve ( C) Small Seeds Small Seeds Box To Frame Small Seeds Box Components Small Seeds Drive Part Number Index /06/ P

4 Table of Contents Alphabetized Table of Contents Part Number Index Selected Models 0 00 Series Long Arm Opener Series Short Arm Opener " x 12" Double "V" Press Wheel " Feeder Cup Spacing " x 13" Single Press Wheel " x 13" Single Press Wheel " x 14" Peaked Single Press Wheel " x 12" Double Ribbed Single Press Wheel " & 6" Seed-Lok (Option) ( K & K) " Feeder Cup Spacing /2" Feeder Cup Spacing...72 B Box Divider Fertilizer...36 C Calibration Tray and Scale...80 Center Box And Center Frame To Mainframe...24 Center Box And Center Frame To Mainframe Fertilizer...26 Center Drive Center Drive (Continued) (S/N S1021-) Center Drive (Continued) (S/N S S/N S1562) Center Drive (Continued) (S/N S1563+) Center Drive Fertilizer (S/N S1562-) Center Drive Fertilizer (S/N S1563+) Center Drive Point Row (Option) (S/N S1562-) Center Drive Point Row (Option) (S/N S1563+) Center Subframe To Box Frame...66 Clutch Linkage Cross Hydraulic Cylinder 5 x 20 x 12 ( C) D Decal Placement (S/N S3495-) Decal Placement (S/N S3496+) Double Selector Valve ( C) Double Selector Valve Mounting Dual Gauge Wheel (S/N S3199-)...82 Dual Gauge Wheel (S/N S3200+)...86 Dual Markers Hydraulics F Fertilizer Drive Subassy ( S) Fertilizer Hose Fertilizer Tray...44 Fertilizer Tray To Box...42 Flat Fold Marker Fold Hydraulics H Hitch To Tongue...8 Hydraulic Cylinder 2 x 8 x 12 ( C) Hydraulic Hose Grips J Jaw Clutch S/N Jaw Clutch S/N (Includes Fertilizer Drills) L Left Hand Drive (S/N S1562-) Left Hand Drive (S/N S1563+) Left Hand Drive Fertilizer (S/N S1562-) Left Hand Drive Fertilizer (S/N S1563+) Left Hand Wing Clutch Fertilizer ( K) Lid To Box...32 Lid To Box Fertilizer...34 Lights (S/N S2966-)...48 Lights (S/N S S3495)...50 Lights (S/N S3496+)...52 Loup Shaft Monitor (2 Channel A) (3 Channel A)...78 M Mainframe To Tongue...12 Manifold Block ( C) (Option) Marker Disc Assembly ( S) Midway Hydraulic Cylinder 5 x 20 x 12 ( C) Monarch Hydraulic Cylinder 5 x 20 x 12 ( C).216 O Opener Down Pressure Hydraulics (Closed Center) (S/N S1699-) Opener Down Pressure Hydraulics (Closed Center) (S/N S1700+) Opener Down Pressure Hydraulics (Open Center) (S/N S1699-) Opener Down Pressure Hydraulics (Open Center) (S/N S1700+) Opener Down Pressure Hydraulics With Point Row (Option) (S/N S1699-) Opener Down Pressure Hydraulics With Point Row (Option) (S/N S1700+) P Point Row Control Box With Cables...58 Pressure Reducing Valve ( C) P /06/18

5 Table of Contents Part Number Index Alphabetized Table of Contents (continued) R Right Hand And Left Hand Subframes To Box Frames...64 Right Hand Drive (S/N S1021-)...92 Right Hand Drive (S/N S S/N S1562)...94 Right Hand Drive (S/N S1563+)...96 Right Hand Drive Fertilizer (Continued) Right Hand Drive Point Row (Option) (S/N S1562-) Right Hand Drive Point Row (Option) (S/N S1563+) Right Hand Fertilizer (S/N S1562-)...98 Right Hand Fertilizer (S/N S1563+) Right Hand Wing Clutch Fertilizer ( K) Wing Box To Wing Frame...28 Wing Box To Wing Frame Fertilizer...30 S Seed Level Indicator...46 Seed Rate Adjustment Handle...68 Seed/Fertilizer Flap ( S)...38 Sequence Valve ( C) Single Gauge Wheel...88 Single Marker Hydraulics Small Seeds Box Components Small Seeds Box To Frame Small Seeds Drive Spill Flap Fertilizer ( S)...40 T Toolbar Fold Midway Hydraulic Cylinder 3.5 x 20 x 5 ( C) Toolbar Pivots To Box Frames...22 Toolbar Pivots To Toolbars (S/N S1194-)...20 Toolbar To Mainframe...18 Transport Axle And Transport Hook Lift Hydraulics (S/N S1283+) Transport Axle And Transport Hook Lift Hydraulics (S/N S1283-) Transport Axle Midway Hydraulic Cylinder 3.5 x 12 x 25 ( C) Transport Axle To Mainframe...14 Transport Hook Cross Hydraulic Cylinder 3.5 x 8 x 25 ( C) Transport Hook Midway Hydraulic Cylinder 3.5 x 8 x 25 ( C) Transport Hook Monarch Hydraulic Cylinder 3.5 x 8 x 25 ( C) Transport Hook To Tongue...10 Transport Tires & Hub...16 V Vansco Shaft Monitor (Option)...76 W Walkboard, Step And Parking Stand To Box Frame (S/N S2030-)...60 Walkboard, Step And Parking Stand To Box Frame (S/N S2031+)...62 Weight Bracket (S/N S1869-)...54 Weight Bracket (S/N S1870+) /06/ P

6 Table of Contents Part Number Index P /06/18

7 Table of Contents Part Number Index 06/06/ P

8 Hitch To Tongue Table of Contents Part Number Index P /06/18

9 Hitch To Tongue Table of Contents Part Number Index Tongue And Mainframe Ref. Part No. Part Description Comments Revision dwg H A D C C C H C C C H C C C C H D C C D C C D C C C C Image No. 30'-3S TONGUE JACK REPLACEMENT KIT SAFETY CHAIN WASHER HHCS 1 1/4-7X10 GR5 SPTHD HHCS 1 1/4-7X9 GR5 SPTHD SAFETY CHAIN LB SINGLE HITCH STRAP-LARGE NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1/2 USS PLT CLEVIS HITCH WELDMENT SPRING HOSE LOOP HEAVY HHCS 1/2-13X3 GR5 WASHER LOCK 1 1/4 SPRING PLT NUT HEX 1 1/4-7 PLT SINGLE HITCH STRAP-SMALL 3-HOSE CLAMP BRACKET WASHER LOCK SPRING 5/16 PLT HHCS 5/16-18X1 1/4 GR5 1/4 MARKER HYD HOSE GUARD HHCS 1/4-20X3/4 GR5 7-PIN CONNECTOR HOLDER 7-PIN CONNECTOR & HOSE HOLDER WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT HHCS 5/16-18X1 GR5 WASHER FLAT 5/16 USS PLT 06/06/ P

10 Table of Contents Transport Hook To Tongue Part Number Index P /06/18

11 Table of Contents Part Number Index Tongue And Mainframe Transport Hook To Tongue Ref. Part No. Part Description Comments Revision dwg C C C D H C C C C C H C C C C Image No. CYL 3.5X8X25 ROD (TIE) 1 PIN WASHER FLAT 1/2 SAE PLT HHCS 1/2-13X2 GR5 ROCKSHAFT HALF BAND CAP NOZERK TRANSPORT HOOKS WELDMENT GREASE ZERK STRAIGHT 1/4-28 NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT PIN CLEVIS 1 X 3 11/16 GR5 PLT WASHER MACH 1 3/4 X 1 X 18 GA CYLINDER LOCK WELDMENT PIN COTTER 3/16 X 1 1/2 PLT NUT-HEX 1/4-20 PLT FSHCS 1/4-20X1 PLT RPBY A Refer to "Transport Hook Midway Hydraulic Cylinder 3.5 x 8 x 25 ( C)", "Transport Hook Monarch Hydraulic Cylinder 3.5 x 8 x 25 ( C)" & "Transport Hook Cross Hydraulic Cylinder 3.5 x 8 x 25 ( C)" for breakdown. 06/06/ P

12 Table of Contents Mainframe To Tongue Part Number Index P /06/18

13 Table of Contents Part Number Index Tongue And Mainframe Mainframe To Tongue Ref. Part No. Part Description Comments Revision dwg H C C C C H C C C C D C C D Image No. MAINFRAME WELDMENT HHCS 1-8X2 3/4 GR. 5 WASHER FLAT 1 USS PLT WASHER LOCK SPRING 1 PLT NUT HEX 1-8 PLT VALVE MOUNT BRACKET HHCS 3/8-16X1 1/4 GR5 WASHER FLAT 3/8 USS PLT WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT RPBY D WASHER LOCK SPRING 5/16 PLT HHCS 5/16-18X2 1/4 GR5 1/4 MARKER HYD HOSE GUARD 06/06/ P

14 Table of Contents Transport Axle To Mainframe Part Number Index P /06/18

15 Table of Contents Part Number Index Transport Axle Transport Axle To Mainframe Ref. Part No. Part Description Comments Revision dwg C C H C C C C H D C C C C C D D C Image No. CYL 3.5X12X25 ROD (TIE ROD) NUT-HEX 1/4-20 PLT TRANSPORT AXLE CYL LOCK FSHCS 1/4-20X1 PLT PIN CLEVIS 1 X 3 11/16 GR5 PLT WASHER MACH 1 3/4 X 1 X 18 GA PIN COTTER 3/16 X 1 1/2 PLT TRANSPORT AXLE WELDMENT 3-BOLT PIVOT BUSH 4 1/2 ID TB WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT HHCS 3/4-10X2 1/2 GR5 GREASE ZERK STRAIGHT 1/4-28 RPBY A PLASTIC CYL LOCK BUMPER LOCK SPRING CLIP HHCS 1/4-20X1/2 GR2 Refer to "Transport Axle Midway Hydraulic Cylinder 3.5 x 12 x 25 ( C)" for breakdown. 06/06/ P

16 Table of Contents Transport Tires & Hub Part Number Index P /06/18

17 Table of Contents Part Number Index Transport Axle Transport Tires & Hub Ref. Part No. Part Description Comments Revision dwg C K K C C C C C D C C C C C C D C C C C C D C C K K K K C C C C Image No. BOLT WHEEL 1/2-20X1 90-DEG TRANSPORT WHEEL & TIRE ASSY TRANSPORT WHEEL/TIRE ASY BKSN VALVE STEM TR415X.625X1 1/4 LG TIRE 11L-15SL 12 PLY TUBELESS WHEEL 15 DIA X 10 WIDE X 6 BLT WHEEL 15 DIAX10WIDEX6BLT BKSN DECAL CAUTION TIRE 52 PSI HUB GREASE CAP BEARING CONE LM BEARING CUP LM BEARING CUP #LM HUB 6 BOLT 4570# W/CUPS PAINTD BEARING CONE #LM SEAL 875 ID X 3.00 OD QDS 7/8 SPINDLE WASHER, HARDENED PIN COTTER 3/16 X 1 1/4 PLT NUT HEX SLOTTED 7/8-14 PLT SPINDLE SGL 98X100 HUB & SPINDLE 6 BOLT 4570 LB HFS 1/2-20X1 1/2 GR5 WHEEL REINFORCING RING HHCS 5/8-11X3 3/4 GR5 NUT LOCK 5/8-11 PLT RH TIRE/RIM 265/70B16.5 SKID 6 LH TIRE/RIM 265/70B16.5 SKID 6 LH TIRE/RIM265/70B16.5SKID6 BK RH TIRE/RIM265/70B16.5SKID6BKS VALVE STEM METAL TR-575 TUBLES TIRE SKID ST 265/70B16.5 NHS RIM 16.5X8.25, 6 BLT 4.63 PILT RIM16.5X8.25 6BLT 4.63PILT BKS Includes items 3 through 5 S/N S3236- S/N S3237+ S/N S3236- S/N S3237+ Includes items 9 & 10 Includes items 7 through 17 Only on outside dual gauge wheels Includes items 24 through 26 S/N S3236- Includes items 24 through 26 S/N S3236- S/N S3237+ S/N S3237+ S/N S3236- S/N S /06/ P

18 Table of Contents Toolbar To Mainframe Part Number Index P /06/18

19 Table of Contents Part Number Index Tool Bars Toolbar To Mainframe Ref. Part No. Part Description Comments Revision dwg D C D D C H H C C C C C D C D C C D H H C C C C D D C C C C C D C C R Image No. HARDENED SPACER WASHER W/SLOTS NUT NY-LOK 7/8-9 PLT TOOLBAR VERTICAL PIVOT PIN TOOLBAR SPACER WASHER STEEL BUSHING 3 1/4X3IDX3LONG TOOLBAR LH OBSO REPLBY H TOOLBAR RH OBSO REPLBY H ADAPT 90 SWIVEL 1/4-28M X 1/4 CYL 3.5X20X5 ROD (TIE ROD) PIN COTTER 5/16 X 2 1/2 NUT HEX SLOTTED 1 1/4-7 WASHER FLAT 1 1/4 USS PLT BOX HINGE PIVOT WASHER HHCS 7/8-9X5 1/2 GR5 HOSE CLAMP BRACKET WASHER LOCK SPRING 5/16 PLT HHCS 5/16-18X5/8 1/4 MARKER HYD HOSE GUARD 3S-3000 TOOLBAR LH 3S-3000 TOOLBAR RH NUT HEX JAM 1 1/4-7 PLT HHCS 1 1/4-7X4 1/2 GR5 WASHER LOCK 1 1/4 SPRING PLT GREASE ADAPT 1/4-28M X 1/4 TB SPLIT SPACER WASHER,INNER LOCK SPLIT SPACER WASHER,OUTER LOCK RHSNB 3/8-16X1 1/4 GR5 RHSNB 3/8-16X1 3/4 GR5 NUT FLANGE LOCK 3/8-16 PLT WASHER FLAT 3/8 USS PLT AD PUSH 1/4 TUBE 1/8 FNPT 5 OUTLET GREASE BANK GREASE ZERK STRAIGHT 1/8-27NPT WASHER FLAT 5/16 SAE PLT TUBE NYLON 1/4OD X 062WL (S/N S1194-) (S/N S1194-) W/GB Refer to page for breakdown. W/GB Shown. (S/N S1195+) (S/N S1195+) W/GB W/GB W/GB JUL JUL JUL JUL JUL /06/ P

20 Table of Contents Part Number Index Toolbar Pivots To Toolbars (S/N S1194-) P /06/18

21 Table of Contents Part Number Index Tool Bars Toolbar Pivots To Toolbars (S/N S1194-) Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C H H C C C Image No. NUT HEX JAM 1 1/4-7 PLT HHCS 1 1/4-7X4 1/2 GR5 NUT HEX 1 1/4-7 NYLON INSERT WASHER MACH 88 X 25 X 10GA WASHER FLAT 1 1/4 SAE PLT STEEL BUSHING 3 1/4X3IDX3LONG NUT HEX FLANGE 3/4-10 GR5 PLT WASHER FLAT 3/4 SAE PLT GREASE ZERK STRAIGHT 1/4-28 TOOLBAR PIVOT WELDMENT LH TOOLBAR PIVOT WELDMENT RH HHCS 1 1/4-7X9 GR5 SPTHD WASHER LOCK 1 1/4 SPRING PLT WASHER MACH 88 X 26 X /06/ P

22 Table of Contents Toolbar Pivots To Box Frames Part Number Index P /06/18

23 Table of Contents Part Number Index Tool Bars Toolbar Pivots To Box Frames Ref. Part No. Part Description Comments Revision dwg C C C D D D Image No. PIN COTTER 5/16 X 2 1/2 NUT HEX SLOTTED 1 1/4-7 WASHER FLAT 1 1/4 USS PLT TOOLBAR SPACER WASHER TOOLBAR HORIZONTAL PIVOT PIN BOX HINGE PIVOT WASHER 06/06/ P

24 Table of Contents Part Number Index Center Box And Center Frame To Mainframe P /06/18

25 Table of Contents Part Number Index Box and Box Frames Center Box And Center Frame To Mainframe Ref. Part No. Part Description Comments Revision dwg D C C C D C C C C C C C C C C C H H S D C Image No. 3S BOX PARTITION HFS 5/16-18X3/4 GR5 HHCS 3/8-16X1 1/4 GR5 WASHER FLAT 3/8 USS PLT INTERIOR ENDPANEL COVER LH HFSS 1/2-13X1 1/2 GR5 NUT HEX FLG. LOCK 1/2-13 PLT. NUT HEX 3/8-16 PLT WASHER LOCK SPRING 3/8 PLT NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT HHCS 1/2-13X1 1/4 GR5 WASHER FLAT 7/8 USS PLT WASHER LOCK SPRING 7/8 PLT NUT HEX 7/8-9 PLT HHCS 7/8-9X2 3/4 GR5 30'-3S CENTER BOX FRAME 30'-3S CENTER BOX FRAME 3000 SEED BOX ASSEMBLY INTERIOR ENDPANEL COVER RH NUT HEX FLANGE 5/16-18 PLT (S/N S1022+) (S/N S1021-) Rev. 2 is not interchangeable w/rev. 1 1st rev. 06/06/ P

26 Table of Contents Part Number Index Center Box And Center Frame To Mainframe Fertilizer P /06/18

27 Table of Contents Part Number Index Box and Box Frames Center Box And Center Frame To Mainframe Fertilizer Ref. Part No. Part Description Comments Revision dwg D C C C D C C C C C C C C C C C H S D C D C D D C Image No. 3S BOX PARTITION HFS 5/16-18X3/4 GR5 HHCS 3/8-16X1 1/4 GR5 WASHER FLAT 3/8 USS PLT INTERIOR ENDPANEL COVER LH HFSS 1/2-13X1 1/2 GR5 NUT HEX FLG. LOCK 1/2-13 PLT. NUT HEX 3/8-16 PLT WASHER LOCK SPRING 3/8 PLT NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT HHCS 1/2-13X1 1/4 GR5 WASHER FLAT 7/8 USS PLT WASHER LOCK SPRING 7/8 PLT NUT HEX 7/8-9 PLT HHCS 7/8-9X2 3/4 GR5 30'-3S CENTER BOX FRAME 3000 SEED BOX ASSEMBLY INTERIOR ENDPANEL COVER RH NUT HEX FLANGE 5/16-18 PLT DIVIDER ANGLE BRACKET HFSS 5/16-18X1 1/4 DIVIDER CLIP INNER DIVIDER CLIP OUTER FLG TP LK 5/16-18ZNYCR 06/06/ P

28 Table of Contents Wing Box To Wing Frame Part Number Index P /06/18

29 Table of Contents Part Number Index Box and Box Frames Wing Box To Wing Frame Ref. Part No. Part Description Comments Revision dwg C D C C D C C C D C C C C H H H H S C D D C C Image No. NUT HEX FLG. LOCK 1/2-13 PLT. HANDLE HFSS 1/2-13X1 1/2 GR5 NUT HEX FLANGE 5/16-18 PLT 3S BOX PARTITION HFS 5/16-18X3/4 GR5 HHCS 3/8-16X1 1/4 GR5 WASHER FLAT 3/8 USS PLT INTERIOR ENDPANEL COVER LH NUT HEX 3/8-16 PLT WASHER LOCK SPRING 3/8 PLT NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT 30'-3S WING BOX FRAME RH 30'-3S WING BOX FRAME RH 30'-3S WING BOX FRAME LH 30'-3S WING BOX FRAME LH 3000 SEED BOX ASSEMBLY HHCS 1/2-13X1 1/4 GR5 INTERIOR ENDPANEL COVER RH RPBY D WASHER LOCK SPRING 5/16 PLT HHCS 5/16-18X1 1/4 GR5 S/N S1022+ (shown) S/N S1021- S/N S1022+ S/N S1021- Rev. 2 is not interchangeable w/rev. 1 1st rev. Rev. 2 is not interchangeable w/rev. 1 1st rev. 06/06/ P

30 Table of Contents Wing Box To Wing Frame Fertilizer Part Number Index P /06/18

31 Table of Contents Part Number Index Box and Box Frames Wing Box To Wing Frame Fertilizer Ref. Part No. Part Description Comments Revision dwg C D C C D C C C D C C C C H H S C D D C C D C D D C Image No. NUT HEX FLG. LOCK 1/2-13 PLT. HANDLE HFSS 1/2-13X1 1/2 GR5 NUT HEX FLANGE 5/16-18 PLT 3S BOX PARTITION HFS 5/16-18X3/4 GR5 HHCS 3/8-16X1 1/4 GR5 WASHER FLAT 3/8 USS PLT INTERIOR ENDPANEL COVER LH NUT HEX 3/8-16 PLT WASHER LOCK SPRING 3/8 PLT NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT 30'-3S WING BOX FRAME RH 30'-3S WING BOX FRAME LH 3000 SEED BOX ASSEMBLY HHCS 1/2-13X1 1/4 GR5 INTERIOR ENDPANEL COVER RH RPBY D WASHER LOCK SPRING 5/16 PLT HHCS 5/16-18X1 1/4 GR5 DIVIDER ANGLE BRACKET HFSS 5/16-18X1 1/4 DIVIDER CLIP INNER DIVIDER CLIP OUTER FLG TP LK 5/16-18ZNYCR 06/06/ P

32 Lid To Box Table of Contents Part Number Index P /06/18

33 Lid To Box Table of Contents Part Number Index Box and Box Frames Ref. Part No. Part Description Comments Revision dwg S C D D C C C C C C D C D C C H C C C C C D Image No. 13' EW LID HINGE ASSEMBLY NUT FLANGE LOCK 3/8-16 PLT LID HINGE PIVOT LID HINGE BASE PLATE RHSNB 3/8-16X2 GR5 RHSNB 3/8-16X1 GR5 DECAL GP PLANTING COMPONENTS NUT LOCK 5/16-18 PLT BALL STUD 10MM X 5/16-18 X 1/ X 90 LB GAS SPRING LATCH CASTING MACHINED SPRING.540 O.D.X 1 1/4 X.054W LID HANDLE WASHER FLAT 5/16 SAE PLT HHCS 5/16-18X1 1/4 NYL LID 104 SEED HHCS 1/4-20X3/4 GR5 MINI END WHEEL PRESS WHEEL NUT HEX FLNG T-LOCK 1/4-20 YLW MANUAL PAK 1'" W/ GASKET HFSS 1/2-13X1 1/2 GR5 MANUAL PAK MOUNTING PLATE Includes items 2 through 5 Includes two of item 9 06/06/ P

34 Table of Contents Lid To Box Fertilizer Part Number Index P /06/18

35 Table of Contents Part Number Index Box and Box Frames Lid To Box Fertilizer Ref. Part No. Part Description Comments Revision dwg S C D D C C C C C C D C D C C H C S C D D Image No. LID HINGE ASSEMBLY PS25120 NUT FLANGE LOCK 3/8-16 PLT LID HINGE PIVOT LID HINGE BASE PLATE RHSNB 3/8-16X2 GR5 HHCS 3/8-16X1 GR5 WASHER FLAT 3/8 USS PLT NUT LOCK 5/16-18 PLT BALL STUD 10MM X 5/16-18 X 1/2 9 1/4-15 X 70LB GAS SPRING LATCH CASTING MACHINED SPRING.540 O.D.X 1 1/4 X.054W LID HANDLE WASHER FLAT 5/16 SAE PLT HHCS 5/16-18X1 1/4 NYL LID 104 SEED NUT HEX LOCK 1/4-20 FLG SEED/FERT FLAP SUBASSY HFSS 1/4-20X1 GR5 HINGE CLAMP STRIP ENDS HINGE CLAMP STRIP CTR Includes items 2-5 Includes two of item 9 Refer to "Seed / Fertilizer Flap ( S)" for breakdown. End strip Center strip 06/06/ P

36 Table of Contents Box Divider Fertilizer Part Number Index P /06/18

37 Table of Contents Part Number Index Box and Box Frames Box Divider Fertilizer Ref. Part No. Part Description Comments Revision dwg C C C C C C D H H H C D C D C S C C D C C Image No. HHCS 3/8-16X1 GR5 DIVIDER INSERT 33 X 4.5 OFFSET KNOB 1/4-20 FEMALE THD NUT FLANGE LOCK 3/8-16 PLT HHCS 1/4-20X1 GR5 NUT LOCK 1/4-20 PLT RETAINER CLIP DIVIDER BOTTOM BRACKET LH DIVIDER BOTTOM BRACKET CTR DIVIDER BOTTOM BRACKET RH NUT HEX FLANGE 5/16-18 PLT DIVIDER CLIP, END MOUNTED HFS 5/16-18X3/4 GR5 TOP BAR END BRACE DIVIDER INSERT 33 X NO OFFSET SPILL FLAP SUBASSY HFSS 1/4-20X1 GR5 NUT HEX LOCK 1/4-20 FLG 3000 FERTILIZER CAP PLATE HFSS 1/4-20X5/8 GR5 NUT HEX LOCK 1/4-20 FLG 06/06/ P

38 Table of Contents Seed/Fertilizer Flap ( S) Part Number Index P /06/18

39 Table of Contents Part Number Index Box and Box Frames Seed/Fertilizer Flap ( S) Ref. Part No. Part Description Comments Revision dwg D D D C C C S Image No. SEED/FERTILIZER SELECT FLAP HINGE CLAMP STRIP CTR HINGE CLAMP STRIP ENDS NUT-LOCK 1/4-20 PLT HHCS 1/4-20X5/8 GR5 RUBBER BELTING HINGE SEED/FERT FLAP SUBASSY Includes items /06/ P

40 Table of Contents Spill Flap Fertilizer ( S) Part Number Index P /06/18

41 Table of Contents Part Number Index Box and Box Frames Spill Flap Fertilizer ( S) Ref. Part No. Part Description Comments Revision dwg D D D C C C C C C D D C S Image No. SPILL FLAP HINGE CLAMP STRIP CTR HINGE CLAMP STRIP ENDS HHCS 1/4-20X5/8 GR5 NUT HEX LOCK 1/4-20 FLG RUBBER BELTING HINGE RUBBER BELTING SEAL STRIP HFSS 1/4-20X1 GR5 RIVET SS 1/8 DIA DIVIDER CLAMP ANGLE TOP BAR PARTITION BRACE WASHER FLAT 1/4 SAE PLT SPILL FLAP SUBASSY Includes items /06/ P

42 Table of Contents Fertilizer Tray To Box Part Number Index P /06/18

43 Table of Contents Part Number Index Box and Box Frames Fertilizer Tray To Box Ref. Part No. Part Description Comments Revision dwg S S S C C C Image No. FERT TRAY ASSEMBLY 6 FERT TRAY ASSEMBLY 7 1/2 FERT TRAY ASSEMBLY 10 HFSS 1/4-20X5/8 GR5 NUT HEX LOCK 1/4-20 FLG HFSS 1/4-20X1 GR5 Refer to "Fertilizer Tray" for breakdown. Refer to "Fertilizer Tray" for breakdown. Refer to "Fertilizer Tray" for breakdown. 06/06/ P

44 Fertilizer Tray Table of Contents Part Number Index P /06/18

45 Fertilizer Tray Table of Contents Part Number Index Box and Box Frames Ref. Part No. Part Description Comments Revision dwg D H D D D H H H D D C C C C C C C C C C C C C C C C C C C C C C C Image No. TRAY BEARING SPACER 13' EW FERT BEARING RETAINER MF FERT.75 HEX BORE BUSHING MF FERT HEX BORE PLASTIC BUSH MF FERT STAR RETAINER SIDE PLT FERT TRAY WELDMENT 7 1/2 FERT TRAY WELDMENT 6 FERT TRAY WELDMENT 10 FERT TRAY ADAPTER PANEL SHAFT 3/4 HEX 109 PLT LATCH STRIKE RIVET SS 1/8 DIA SCREW SET 1/4-28 SH X 1/2 LG HHCS 3/8-16X1 1/4 GR5 RHSNB 5/16-18X3/4 GR5 HFSS 1/4-20X1/2 GR5 RHSNB 3/8-16X1 3/4 GR5 RHSNB 1/4-20X5/8 PLT NUT-HEX 1/4-20 PLT NUT HEX 5/16-18 PLT NUT HEX 3/8-16 PLT NUT HEX LOCK 1/4-20 FLG WASHER LOCK SPRING 1/4 PLT WASHER LOCK SPRING 5/16 PLT WASHER LOCK SPRING 3/8 PLT SPKT 40B30 X 3/4 HEXBORE W/ SS VINYL FERTILIZER DEW SHIELD 6 POINT FERT METERING WHEEL NYLON RATCHET (TREE RIVET) BRG FLG 25ID 3BOLT FELT SEAL WASHER MACH 2 1/2X1 3/4X.075 LATCH FERT TRAY DOOR 06/06/ P

46 Table of Contents Seed Level Indicator Part Number Index P /06/18

47 Table of Contents Part Number Index Box and Box Frames Seed Level Indicator Ref. Part No. Part Description Comments Revision dwg D C C C H C C C C C C H C C C C D D C C C C Image No. SEED LEVEL CHAIN BRACKET RIVET POP 1/8X.265LG FLG PIN COTTER 1/8 X 3/4 CABLE 3/64 X 11 5/8 W/ EYELETS 3S SEED LEVEL ROD SEED LEVEL ARM MOUNT WASHER LOCK #10 NUT HEX PLT SEED LEVEL BUSHING SCREW SET 1/4-28X1/4 KNL CUP SEED LEVEL INDICATOR INDICATOR OB RPLCD BY C DECAL LETTER E DECAL SEED LEVEL, NOTCHED DECAL LETTER F HFS X 1 1/8 PLTD FOAM FLOAT FOAM FLOAT WASHER WASHER FLAT 1/4 USS PLT.00 HEX SS 1/4-20 NYLOCK SCR HEX HD SHT MET #8 X 1/2 DECAL SEED LEVEL LH Use with item 20. Use with item 10. No longer available. Order part no C. No longer available. Order part no C. No longer available. Order part no C.. 2nd rev. Use existing stock; 1st rev. 06/06/ P

48 Table of Contents Lights (S/N S2966-) Part Number Index P /06/18

49 Table of Contents Part Number Index Box and Box Frames Lights (S/N S2966-) Ref. Part No. Part Description Comments Revision dwg C C C C C C C C D D C C C C Image No. DUAL AG LIGHTS RH DUAL AG LIGHTS LH SCR HEX SELF TAP 1/4-20X1TYPEF HFSS 1/2-13X1 1/2 GR5 LIGHT HARNESS, 20' WISHBONE CABLE TIE.19X D 50LB HOSE CLIP 13/16 ID AG LIGHT WIRING HARNESS-28' PLATE, AG LIGHT RH PLATE, AG LIGHT LH NUT HEX FLG. LOCK 1/2-13 PLT. WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT CABLE TIE MOUNT Shown Shown 06/06/ P

50 Table of Contents Lights (S/N S S3495) Part Number Index P /06/18

51 Table of Contents Part Number Index Box and Box Frames Lights (S/N S S3495) Ref. Part No. Part Description Comments Revision dwg C C C C D D C C C C C C C C C Image No. LIGHT HARNESS 20' WISHBONE LED AG LGHT WIRING HARNESS-28' LED LIGHT, AMBER LAMP LED LIGHT, RED LAMP - LED PLATE, AG LIGHT LH PLATE, AG LIGHT RH SCREW HEX SELF TAP 1/4-20X3/4 HHCS 1-8X5 1/2 GR5 NUT HEX FLG LOCK 1/2-13 PLT LIGHT HRNSS ENHANCE MODULE LED CABLE TIE MOUNT CABLE TIE.19X D 50LB HOSE CLIP 13/16 ID WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT Shown 06/06/ P

52 Table of Contents Lights (S/N S3496+) Part Number Index P /06/18

53 Table of Contents Part Number Index Box and Box Frames Lights (S/N S3496+) Ref. Part No. Part Description Comments Revision dwg C C C C C D C C C C C D C Image No. AG LGHT WIRING HARNESS-28' LED HARNESS EXT. 15' 2 PIN WP LIGHT 16' A 11' R WISHBONE LED LIGHT HRNSS ENHANCE MODULE LED ADHESIVE BACK CORD CLIP 2600 SIDE LIGHT BRKT LIGHT, AMBER LAMP LED HFSS 1/2-13X1 1/2 GR5 WASHER FLAT RUBBER 1/2 NUT HEX FLG LOCK 1/2-13 PLT SCREW HEX SELF TAP 1/4-20X3/4 3 SEC MIN TILL LIGHT BRACKET LIGHT, RED LAMP - LED 06/06/ P

54 Table of Contents Weight Bracket (S/N S1869-) Part Number Index P /06/18

55 Table of Contents Part Number Index Box and Box Frames Weight Bracket (S/N S1869-) Ref. Part No. Part Description Comments Revision dwg C H H D C C C C C C Image No. HHCS 5/8-11X2 GR5 WEIGHT BRACKET WELDMENT-LH WEIGHT BRACKET WELDMENT-RH WEIGHT BRACKET ADJ LEG WASHER FLAT 5/8 USS PLT WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT NUT HEX 3/4-10 PLT WASHER LOCK SPRING 3/4 PLT U-BOLT 3/ /32 X 7 3/4 06/06/ P

56 Table of Contents Weight Bracket (S/N S1870+) Part Number Index P /06/18

57 Table of Contents Part Number Index Box and Box Frames Weight Bracket (S/N S1870+) Ref. Part No. Part Description Comments Revision dwg C D D C C Image No. HHCS 3/8-16X1 1/2 GR5 END CAP - TUBE WING WEIGHT 3000TT/4000TT WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT 06/06/ P

58 Table of Contents Point Row Control Box With Cables Part Number Index P /06/18

59 Table of Contents Part Number Index Box and Box Frames Point Row Control Box With Cables Ref. Part No. Part Description Comments Revision dwg C C C C C Image No. POINT ROW CONTROL BOX POINT ROW CABLE W/ POWER LEAD 3 SECT POINT ROW WIRE HARNESS BYPASS CARTRIDGE AND SOLENOID HYDRAULIC BYPASS VALVE 06/06/ P

60 Table of Contents Part Number Index Walkboard, Step And Parking Stand To Box Frame (S/N S2030-) P /06/18

61 Table of Contents Part Number Index Box and Box Frames Walkboard, Step And Parking Stand To Box Frame (S/N S2030-) Ref. Part No. Part Description Comments Revision dwg H C C D D C H C C C Image No. 30'-3S WALKBOARD NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT STEP LH STEP RH HHCS 1/2-13X1 3/4 GR5 PARKING STAND LEG PIN HAIR COTTER.148 WIRE PIN BENT SHANK LOCK 5/8 OD HHCS 1/2-13X1 1/4 GR5 Shown 06/06/ P

62 Table of Contents Part Number Index Walkboard, Step And Parking Stand To Box Frame (S/N S2031+) P /06/18

63 Table of Contents Part Number Index Box and Box Frames Walkboard, Step And Parking Stand To Box Frame (S/N S2031+) Ref. Part No. Part Description Comments Revision dwg H H H C C C C C C C C C H H C D C C C C H H Image No. PARKING STAND LEG LADDER WELDMENT 3-STEP NARROW 30'-3S WALKBOARD HHCS 1/2-13X1 1/4 GR5 RHSNB 7/16-14X1 3/4 GR5 NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT PIN HAIR COTTER.148 WIRE PIN BENT SHANK LOCK 5/8 OD HHCS 3/8-16X1 1/4 GR5 WASHER FLAT 1/2 SAE PLT NUT FLANGE LOCK 3/8-16 PLT LADDER MOUNT TOP WELDMENT RH LADDER MOUNT TOP WELDMENT LH HHCS 3/8-16X1 GR5 LADDER MOUNT BOTTOM PLATE WASHER LOCK SPRING 3/8 PLT NUT HEX FLANGE 3/8-16 PLT NUT HEX 7/16-14 PLT WASHER LOCK 7/16 PLT WALKBOARD EXTENSION LH WALKBOARD EXTENSION RH Shown LH Used with Small Seeds Only RH Used with Small Seeds Only 06/06/ P

64 Table of Contents Part Number Index Right Hand And Left Hand Subframes To Box Frames P /06/18

65 Table of Contents Part Number Index Box and Box Frames Right Hand And Left Hand Subframes To Box Frames Ref. Part No. Part Description Comments Revision dwg C C H H H H H C C D C H C D C C C C K C C C C C H C C C D C C H H H D C C C D Image No. NUT HEX 1-8 PLT WASHER LOCK SPRING 1 PLT 6 1/8 EYE BOLT 3S-3000 OPENER SUBFRAME RH 3S-3000 OPENER SUBFRAME LH SUBFRAME END RIGHT SUBFRAME END LEFT HHCS 3/4-10X5 1/2 GR5 NUT LOCK 3/4-10 PLT TRUNNION CASTING MACHINED PIN ROLL 5/16 X 1 LG SUBFRAME PIVOT ARM OUTSIDE PIN COTTER 3/16 X 1 1/2 PLT PIVOT ARM WASHER HHCS 1 1/8-7X2 1/2 GR5 HHCS 1 1/8-7X2 GR5 FTHD PIN CLEVIS 1 X 3 7/8 USBLE PLT CYL 2X8X12 ROD (TIE ROD) 3S BEARING ASSEMBLY HHCS 3/4-10X3 3/4 GR5 GREASE ZERK 1/4-28 X 45-DEG WASHER FLAT 3/4 SAE PLT WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT SUBFRAME PIVOT ARM INSIDE GREASE ZERK STRAIGHT 1/4-28 NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT 3 BOLT PIVOT CAST W/ BOLT H0LE HHCS 1/2-13X1 3/4 GR5 HHCS 3/4-10X7 GR5 SUBFRAME ARM RETAINER SUBFRAME FLEX ARM, INNER SUBFRAME FLEX ARM, OUTER SUBFRAME FLEX ARM SPACER,SHORT HHCS 7/8-9X8 1/2 GR5 NUT NY-LOK 7/8-9 PLT NUT LOCK 3/4-10 PLT SUBFRAME FLEX ARM SPACER, LONG (S/N S1402+) Shown (S/N S1402+) (S/N S1401-) (S/N S1401-) (S/N S1398-) (S/N S1398-) (S/N S1398-) Order with C. (S/N S1398-) (S/N S1398-) (S/N S1398-) (S/N S S1398) (S/N S1021-) Refer to Hydraulic Cylinder ( C 2X8X12 ROD) for breakdown Includes items 17 through 23 (discard 2 of 4 flatwashers upon installation). (S/N S1398-) (S/N S1046+) (S/N S1045+) (S/N S1399+) (S/N S1399+) (S/N S1399+) (S/N S1399+) (S/N S1399+) (S/N S1399+) (S/N S1402+) Revision 2 is not interchangeable with revision 1st Revision. 06/06/ P

66 Table of Contents Center Subframe To Box Frame Part Number Index P /06/18

67 Table of Contents Part Number Index Box and Box Frames Center Subframe To Box Frame Ref. Part No. Part Description Comments Revision dwg C C H C D H H C C D C H C D C C C C C C C H C C C C D H Image No. NUT HEX 1-8 PLT WASHER LOCK SPRING 1 PLT 6 1/8 EYE BOLT HHCS 1/2-13X1 3/4 GR5 3 BOLT PIVOT CAST W/ BOLT H0LE 3S-3000 OPENER SUBFRAME CENTER SUBFRAME CENTER NUT LOCK 3/4-10 PLT HHCS 3/4-10X6 GR5 TRUNNION CASTING MACHINED PIN ROLL 5/16 X 1 LG SUBFRAME PIVOT ARM INSIDE PIN COTTER 3/16 X 1 1/2 PLT PIVOT ARM WASHER HHCS 1 1/8-7X2 1/2 GR5 HHCS 1 1/8-7X2 GR5 FTHD GREASE ZERK STRAIGHT 1/4-28 PIN CLEVIS 1 X 3 7/8 USBLE PLT CYL 2X8X12 ROD (TIE ROD) WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT SUBFRAME ARM RETAINER HHCS 3/4-10X7 GR5 WASHER FLAT 3/4 SAE PLT NUT NY-LOK 7/8-9 PLT HHCS 7/8-9X7 GR5 SUBFRAME FLEX ARM SPACER,SHORT SUBFRAME FLEX ARM, INNER (S/N S1399+) (S/N S1398-); Not shown (S/N S1398-) (S/N S1398-) (S/N S1398-); Order with C (S/N S1398-) (S/N S1398-) (S/N S S1398) (S/N S1021-) Refer to Hydraulic Cylinder ( C 2X8X12 ROD) for breakdown (S/N S1046+) (S/N S1046+) (S/N S1046+) (S/N S1399+) (S/N S1399+) (S/N S1399+) (S/N S1399+) Rev. 2 is not interchangeable w/rev. 1 1st rev. 06/06/ P

68 Table of Contents Seed Rate Adjustment Handle Part Number Index P /06/18

69 Table of Contents Part Number Index Feeder Cup Channels Seed Rate Adjustment Handle Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C H C C D C C H C C C H C C C C C Image No. NUT HEX 5/16-18 PLT WASHER LOCK SPRING 5/16 PLT WASHER FLAT 5/16 SAE PLT HHCS 3/8-16X3/4 GR5 WASHER LOCK SPRING 3/8 PLT WASHER FLAT 3/8 SAE PLT HHCS 5/16-18X3/4 GR5 SNAP RING EXT 17 MM BRG BALL 17IDX40OD 6203 WASHER ADJ HANDLE BRG SEED RATE ADJ HANDLE WLDMNT WASHER FLAT 5/8 SAE PLT WASHER MACH 19 X.63 X 18GA ADJUSTMENT HANDLE PIVOT PIN COTTER 3/16 X 1 1/4 PLT NUT WING 1/2-13 PLT ADJ LOCK PLATE ASS'Y - 1 1/2 W SCREW RD HD 8-32 X 3/8 BRASS WASHER FLAT #8 BRASS NAME PLATE ADJ. GUIDE LONG SEED RATE ADJ WLDMNT WASHER INTERNAL STAR #8 BRASS NUT HEX 8-32 BRASS NUT HEX LOCK 1/4-20 FLG HFSS 1/4-20X5/8 GR5 1 3/4 WIDE FEEDER CUP PLUG 06/06/ P

70 Table of Contents 6" Feeder Cup Spacing Part Number Index P /06/18

71 Table of Contents Part Number Index Feeder Cup Channels 6" Feeder Cup Spacing Ref. Part No. Part Description Comments Revision dwg D D D D C D D C C D D C C S D E D C C C D D C C C C C C C C C C C C C D Image No. 3 BOX DIVIDER FOR 4 7/8 ROW BOX DVDR 4.00 X 60DEG BOX DVDR 5.13 X 60DEG 6 5/8 BOX DVDER FOR 8 1/2 ROW HHCS 1/4-20X3/4 GR5 2SNT SEED BOX DIVIDER CLIP 30'-6 20RW FEEDERCUP TRAY NUT HEX WHIZ 1/4-20 PLT WASHER RETAINING 454 FEEDER CUP SPACER SPACER TUBE X 454 5/8 SHAFT LOCKING COLLAR SCREW SET 5/16-18 SKT KP X 3/8 FEEDER CUP BEARING ASSEMBLY BEARING HUB 40A15 RPBY D FEEDER CUP BEARING HOUSING BRG 30IDX55OD MM SNAP RING EXT BASIC 1 3/16 SNAP RING INTERNAL 165 MACHINED ADJUSTMENT SPOOL 5/8SQ /32 FEEDRCUP SHFT PM SEED CUP SPROCKET RPBY C SEED CUP SLEEVE SEED CUP ADJUSTMENT HANDLE SEED CUP RIGHT HALF SEED CUP DOOR SEED CUP LEFT HALF SCR SELF TAP 8X3/8 TYPE25 BT NYLON WASHER-SPLIT SEED CUP WASHER RETAINER SEED CUP ASSEMBLY HHCS 3/8-16X3/4 GR5 WASHER LOCK SPRING 3/8 PLT SPACER TUBE X 207 Includes items 15 through 19. Includes items 24 through 30. 2nd Revision. Use existing stock; 1st Revision. 06/06/ P

72 Table of Contents 7 1/2" Feeder Cup Spacing Part Number Index P /06/18

73 Table of Contents Part Number Index Feeder Cup Channels 7 1/2" Feeder Cup Spacing Ref. Part No. Part Description Comments Revision dwg D D D D D D C D D C C C C D S C C C D D E D D D D D D C C C C C C C C C C C C Image No. BOX DVDR 4.00 X 60DEG 5 5/8 BOX DVDR FOR 7 1/2 ROW BOX DVDR 5.13 X 60DEG 4 5/8 BOX DVDR FOR 8 ROW 4 13/16 BOX DVDR FOR 7 1/2 ROW BOX DIVIDER FOR 10 ROW HHCS 1/4-20X3/4 GR5 2SNT SEED BOX DIVIDER CLIP 30'-7 1/2 16RW FEEDERCUP TRAY 5/8 SHAFT LOCKING COLLAR SCREW SET 5/16-18 SKT KP X 3/8 NUT HEX WHIZ 1/4-20 PLT WASHER RETAINING SPACER TUBE X FEEDER CUP BEARING ASSEMBLY SNAP RING EXT BASIC 1 3/16 SNAP RING INTERNAL 165 BRG 30IDX55OD MM FEEDER CUP BEARING HOUSING BEARING HUB 40A15 RPBY D SPACER TUBE X SPACER TUBE X FEEDER CUP SPACER MACHINED ADJUSTMENT SPOOL SPACER TUBE X 707 5/8SQ /32 FEEDRCUP SHFT SEED CUP ADJUSTMENT HANDLE SEED CUP RIGHT HALF SEED CUP DOOR SEED CUP LEFT HALF SCR SELF TAP 8X3/8 TYPE25 BT NYLON WASHER-SPLIT SEED CUP WASHER RETAINER SEED CUP ASSEMBLY RPBY C SEED CUP SLEEVE WASHER LOCK SPRING 3/8 PLT HHCS 3/8-16X3/4 GR5 Includes items 16 through 20 Includes items 27 through 33 2nd rev. Use existing stock; 1st rev. 06/06/ P

74 Table of Contents 10" Feeder Cup Spacing Part Number Index P /06/18

75 Table of Contents Part Number Index Feeder Cup Channels 10" Feeder Cup Spacing Ref. Part No. Part Description Comments Revision dwg D D C D D C C C C D S C C C D D E D D D D C C C C C C C C C C C C C Image No. 6 5/8 BOX DVDER FOR 8 1/2 ROW BOX DIVIDER FOR 10 ROW HHCS 1/4-20X3/4 GR5 2SNT SEED BOX DIVIDER CLIP 30'-10 12RW FEEDERCUP TRAY 5/8 SHAFT LOCKING COLLAR SCREW SET 5/16-18 SKT KP X 3/8 NUT HEX WHIZ 1/4-20 PLT WASHER RETAINING SPACER TUBE X FEEDER CUP BEARING ASSEMBLY SNAP RING EXT BASIC 1 3/16 SNAP RING INTERNAL 165 BRG 30IDX55OD MM FEEDER CUP BEARING HOUSING BEARING HUB 40A15 RPBY D 185C058TUBE X MACHINED ADJUSTMENT SPOOL SPACER TUBE X /8SQ /32 FEEDRCUP SHFT SEED CUP ADJUSTMENT HANDLE SEED CUP RIGHT HALF SEED CUP DOOR SEED CUP LEFT HALF SCR SELF TAP 8X3/8 TYPE25 BT NYLON WASHER-SPLIT SEED CUP WASHER RETAINER SEED CUP ASSEMBLY SEED CUP SLEEVE PM SEED CUP SPROCKET RPBY C WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT Includes items 12 through 16. Includes items 21 through 27. 2nd Revision. Use existing stock; 1st Revision. 06/06/ P

76 Table of Contents Vansco Shaft Monitor (Option) Part Number Index P /06/18

77 Table of Contents Part Number Index Feeder Cup Channels Vansco Shaft Monitor (Option) Ref. Part No. Part Description Comments Revision dwg27009 Image No C VANSCO 2 CHANNEL SHAFT MONITOR C VANSCO 3 CHANNEL SHAFT MONITOR C VANSCO 2 CHNL SHAFT MNTR-2SNT VANSCO CONTROL BOX ASSY 2 CH VANSCO CONTROL BOX ASSY 3 CH VANSCO HARNESS 2 CH 40FT VANSCO HARNESS 3 CH 60FT VA REED SWITCH PICK-UP C WASHER FLAT #8 SAE PLT C WASHER LOCK # C NUT HEX D VANSCO SWITCH BRACKET C SCREW RD HD 8-32 X 1 1/2LG PLT C SCREW RD HD 8-32 X 1/2 LG PLT K VANSCO MAGNET & CABLE TIE ASSY C VANSCO MAGNET C CABLE TIE.19X D 50LB VA-VMM MOUNTING BRACKET VA VANSCO MOUNTING KNOB KIT VA-JX-B77 BRYLITE CONSOLE END VA-JX-B76 BRYLITE HARNESS END 06/06/ P

78 Table of Contents Part Number Index Loup Shaft Monitor (2 Channel A) (3 Channel A) P /06/18

79 Table of Contents Part Number Index Feeder Cup Channels Loup Shaft Monitor (2 Channel A) (3 Channel A) Ref. Part No. Part Description Comments Revision dwg C C C D C D C C Image No. HFSS 1/4-20X3/4 GR5 HOSE CLIP 5/8 I.D. NUT HEX LOCK 1/4-20 FLG CABLE TIE, NYLON MAGNET, ADHESIVE BACKED, LARGE NUT HEX JAM, PLASTIC M16 X 2 SHAFT SENSOR MOUNT SCR SELF TAP #10 X 3/4 LOUP SHAFT SENSOR 2&3 CHANNEL SMALL CUP SENSOR MOUNT LOUP 3 CHANNEL SHAFT MONITOR LOUP 2 CHANNEL SHAFT MONITOR SHAFT MONITOR EXT. 30' 6P WP HARNESS 3 SHAFT MONITOR LOUP LOUP 3 CHANNEL SHAFT MONITOR SHAFT MONITOR EXT. 25' 4P WP HARNESS 2 SHAFT MONITOR LOUP 06/06/ P

80 Table of Contents Calibration Tray and Scale Part Number Index (Applies to 3S-3000 only) P /06/18