Parts Manual. 2400, 2410 And point Drill. Copyright 2017 Printed 08/29/ P

Transcription

1 Table of Contents Part Number Index Parts Manual 3-point Drill 2400, 2410 And 2420 Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! Cover illustration may show optional equipment not supplied with standard unit. Copyright 2017 Printed 08/29/ P

2 Table of Contents Table of Contents Part Number Index Section 1: Introduction...4 Using This Manual...4 Manual Replacement Information...4 Manual Revisions...4 Touch-up Paint...4 Hardware Legend...5 Replacement Hardware...5 Serial Numbers...5 Part Number Service Coding...5 Box Assembly...6 Box To Frame...6 Lid To Box...8 Lights...10 Parking Stand (Option)...12 Rear Parking Stands...14 Seed Level Indicator...16 Walkboard Assembly...18 Weight Bracket...20 Decals...22 Decal Placement...22 Drill Boom...24 Ball Valve...24 Drill Boom Mounting...26 Drill Boom Plumbing...28 Spraying Systems Check Valve ( C)...30 Drive /9/2001 Jackshaft Drive...32 Gauge Wheel...34 Gauge Wheel Drive...36 Markers...39 Cross Hydraulic Cylinder 2.5 x 20 x 1.12 ( C)...40 Flat Fold Dual Marker Hydraulics...42 Flat Fold Marker...44 Flat Fold Marker Sequence Valve Hydraulics...46 Marker Disc Assembly ( S)...48 Midway Hydraulic Cylinder 2.5 x 20 x 1.12 ( C)...50 Monarch Hydraulic Cylinder 2.5 x 20 x 1.12 ( C)...52 Sequence Valve ( C)...54 Metering System " Feeder Cup Spacing " And 7" Feeder Cup Spacing /2" And 8" Feeder Cup Spacing...60 Feeder Cup Channel...62 Loup Shaft Monitor (2 Channel A) (3 Channel A)...64 Seed Rate Handle...66 Openers...68 Option 00 Straight Arm Opener...68 Option 10 Parallel Arm Opener...70 Option 20 Series Opener...72 Seed-Lok, (Option)...74 Wiper Wheel...76 Press Wheels " x 10" Double "V" Press Wheel (10/1/2000+) " x 10" Double "V" Press Wheel (9/30/2000-) " x 12" Double "V" Press Wheel " x 12" Double Press Wheel " x 12" Press Wheel " x 13" Smooth Crown Press Wheel " x 13" V-Crown Press Wheel " x 14" Peaked Press Wheel " x 12" "V" Groove Press Wheel...94 Part Number Index...96 Copyright 2017 All rights reserved Printed 08/29/17 Great Plains Manufacturing, Inc. provides this publication as is without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. Great Plains Manufacturing, Incorporated Trademarks The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains All other brands and product names are trademarks or registered trademarks of their respective holders. Printed in the United States of America P /29/17

3 Table of Contents Part Number Index Alphabetized Table of Contents Selected Models 1 1" x 10" Double "V" Press Wheel (10/1/2000+) " x 10" Double "V" Press Wheel (9/30/2000-) " x 12" Double "V" Press Wheel " x 12" Double Press Wheel " x 12" Press Wheel " Feeder Cup Spacing " x 13" Smooth Crown Press Wheel " x 13" V-Crown Press Wheel " x 14" Peaked Press Wheel " x 12" "V" Groove Press Wheel " And 7" Feeder Cup Spacing /2" And 8" Feeder Cup Spacing /9/2001 Jackshaft Drive...32 B Ball Valve...24 Box To Frame...6 M Marker Disc Assembly ( S)...48 Midway Hydraulic Cylinder 2.5 x 20 x 1.12 ( C)...50 Monarch Hydraulic Cylinder 2.5 x 20 x 1.12 ( C)...52 O Option 00 Straight Arm Opener...68 Option 10 Parallel Arm Opener...70 Option 20 Series Opener...72 P Parking Stand (Option)...12 R Rear Parking Stands...14 S Seed Level Indicator...16 Seed Rate Handle...66 Seed-Lok, (Option)...74 Sequence Valve ( C)...54 Spraying Systems Check Valve ( C)...30 W Walkboard Assembly...18 Weight Bracket...20 Wiper Wheel...76 C Cross Hydraulic Cylinder 2.5 x 20 x 1.12 ( C)...40 D Decal Placement...22 Drill Boom Mounting...26 Drill Boom Plumbing...28 F Feeder Cup Channel...62 Flat Fold Dual Marker Hydraulics...42 Flat Fold Marker...44 Flat Fold Marker Sequence Valve Hydraulics...46 G Gauge Wheel...34 Gauge Wheel Drive...36 L Lid To Box...8 Lights...10 Loup Shaft Monitor (2 Channel A) (3 Channel A) /29/ P

4 Table of Contents Part Number Index P /29/17

5 Table of Contents Part Number Index 08/29/ P

6 Box To Frame Table of Contents Part Number Index P /29/17

7 Box To Frame Table of Contents Part Number Index Box Assembly Ref. Part No. Part Description Comments Revision dwg H C C C H C C C H D C C C D C C C D D C C C D C C C Image No. FRAME 3PT 24' HHCS 1/2-13X1 1/4 GR5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT REAR MNT.TB 24' HFSS 1/4-20X3/4 GR5 NUT HEX LOCK 1/4-20 FLG HHCS 1/2-13X2 GR5 12' SEED BOX SEED BOX IDLER COVER LH HHCS 3/8-16X1 1/4 GR5 WASHER LOCK SPRING 3/8 PLT WASHER FLAT 3/8 USS PLT HANDLE HFSS 1/2-13X1 1/2 GR5 HFS 5/16-18X3/4 GR5 NUT HEX FLANGE 5/16-18 PLT SEED BOX PARTITION SEED BOX IDLER COVER RH PIN HITCH 1 1/4 X 4 1/2 PIN HITCH 1 7/16 X 8 3/8 PLT PIN HAIR COTTER.243 WIRE PLT BEARING CUTOUT COVER, 47 MST RHSNB 5/16-18X3/4 GR5 WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT 1/31/2002-1/31/2002-2/1/ /1/ /1/ /1/ /29/ P

8 Lid To Box Table of Contents Part Number Index P /29/17

9 Lid To Box Table of Contents Part Number Index Box Assembly Ref. Part No. Part Description Comments Revision dwg S C C C D D C H C C C D C D C C Image No. LID HINGE ASSEMBLY PS25120 WASHER FLAT 3/8 USS PLT HHCS 3/8-16X1 GR5 NUT FLANGE LOCK 3/8-16 PLT LID HINGE PIVOT LID HINGE BASE PLATE RHSNB 3/8-16X2 GR5 LID /16 SEED NUT LOCK 5/16-18 PLT BALL STUD 10MM X 5/16-18 X 1/ X 90 LB GAS SPRING LATCH CASTING MACHINED SPRING.540 O.D.X 1 1/4 X.054W LID HANDLE WASHER FLAT 5/16 SAE PLT HHCS 5/16-18X1 1/4 NYL Includes items 4, 5, 6 and 7. 08/29/ P

10 Lights Table of Contents Part Number Index P /29/17

11 Lights Table of Contents Part Number Index Box Assembly Ref. Part No. Part Description Comments Revision dwg D C C C C C C D C C Image No. HANDLE HFSS 1/2-13X1 1/2 GR5 LIGHT HARNESS, 15' WISHBONE CABLE TIE.19X DIA 50LB SCR HEX SELF TAP 1/4-20X1TYPEF DUAL AG LIGHTS LH DUAL AG LIGHTS RH 12' EWNT LIGHT BRACKET LIGHT HARNESS, 5' LEAD NUT HEX FLG. LOCK 1/2-13 PLT. Used on LH side. Shown. Used on RH side. 08/29/ P

12 Table of Contents Parking Stand (Option) Part Number Index P /29/17

13 Table of Contents Part Number Index Box Assembly Parking Stand (Option) Ref. Part No. Part Description Comments Revision dwg C H C C C C C H C C D C Image No. U-BOLT 1/2-13 X 2 X 3 GR 5 STAND MOUNT, FRONT TUBE WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT NUT LOCK 1/2-13 PLT JACK STAND ASSEMBLY PIN 3/8 X 3 USABLE LW/PIN HHCS 1/2-13X3 1/2 GR5 3-PT STEP RETAINER HHCS 3/8-16X1 1/4 GR5 08/29/ P

14 Table of Contents Rear Parking Stands Part Number Index P /29/17

15 Table of Contents Part Number Index Box Assembly Rear Parking Stands Ref. Part No. Part Description Comments Revision dwg H H C C C C C Image No. PARKING STAND WLMT PARKING STAND MNT WLMT RHSNB 1/2-13X1 1/2 GR5 HHCS 3/4-10X4 1/4 SPTHD GR 8 NUT HEX 1/2-13 PLT NUT HEX FLANGE LOCK 3/4-10 PLT WASHER LOCK SPRING 1/2 PLT 08/29/ P

16 Table of Contents Seed Level Indicator Part Number Index P /29/17

17 Table of Contents Part Number Index Box Assembly Seed Level Indicator Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C C H C D C D C C C D D Image no. SEED LEVEL INDICATOR DECAL SEED LEVEL LH DECAL SEED LEVEL, NOTCHED DECAL LETTER E SCR HEX HD SHT MET #8 X 1/2 SEED LEVEL BUSHING NUT HEX PLT WASHER INTERNAL STAR #10 PLT DECAL LETTER F SEED LEVEL ARM MOUNT HFS X 1 1/8 PLTD SEED LEVEL ARM, 6 3/4R. TAB RIVET POP 1/8X.265LG FLG SEED LEVEL CHAIN BRACKET CABLE 3/64 X 11 5/8 W/ EYELETS FOAM FLOAT WASHER FLAT 1/4 USS PLT.00 HEX SS 1/4-20 NYLOCK PIN COTTER 1/8 X 3/4 FOAM FLOAT WASHER SEED FLOAT DOWN FLOAT STOP No longer available. Order part no C. No longer available. Order part no C. 2nd rev. 1st rev. 08/29/ P

18 Table of Contents Walkboard Assembly Part Number Index P /29/17

19 Table of Contents Part Number Index Box Assembly Walkboard Assembly Ref. Part No. Part Description Comments Revision dwg D C C H D C C C C C L H D C D C D C C D H Image No. STEP HHCS 1/2-13X1 1/2 GR5 HHCS 3/8-16X1 GR5 WALKBOARD END BRACKET RH 3-PT STEP RETAINER HHCS 3/8-16X1 1/4 GR5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT OPENER SPRING ADJUST HANDLE SPRING ADJUSTMENT TOOL WELD 20 SER SEED-LOK HANDLE PIN HAIR COTTER.148 WIRE OPENER HANDLE HOLDER HFS 3/8-16X1 GR5 WALKBOARD SUPPORT BRACKET U-BOLT 1/2-13 X 2 X 3 GR 5 NUT FLANGE LOCK 3/8-16 PLT WALKBOARD 3PT 12' WALKBOARD END BRACKET LH 10 Series only. 20 Series only. 08/29/ P

20 Weight Bracket Table of Contents Part Number Index P /29/17

21 Weight Bracket Table of Contents Part Number Index Box Assembly Ref. Part No. Part Description Comments Revision dwg H H C C C C C D C C C Image No. WEIGHT BRACKET WELDMENT-RH WEIGHT BRACKET WELDMENT-LH U-BOLT 3/4-10 X 6 1/16 X 9 5/8 U-BOLT 3/ /32 X 7 3/4 NUT HEX 3/4-10 PLT WASHER LOCK SPRING 3/4 PLT HHCS 5/8-11X2 1/4 GR5 WEIGHT BRACKET ADJ LEG WASHER FLAT 5/8 USS PLT WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT 08/29/ P

22 Decal Placement Table of Contents Part Number Index P /29/17

23 Table of Contents Part Number Index Decals Decal Placement Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C Image No. DECAL AMBER REFLECTOR DECAL GROUND AND TUBE DISTANCE DECAL RED REFLECTOR DECAL GREAT PLAINS ON LOGO SML DECAL GREAT PLAINS ON LOGO DECAL LOGO&GP F/STRIPE 4 X 24 DECAL GP W/ LOGO AND STRIPE DECAL 3 COLOR STRIPE 2.50 WIDE DECAL W/ 4 COLOR STRIPE DECAL SLOW MOVING VEHICLE DECAL 2400 DECAL SOLID STAND 2400 DECAL 2410 DECAL SOLID STAND 2410 DECAL 2420 DECAL SOLID STAND 2420 DECAL CAUTION TIRES NOT A STEP DECAL CAUTION OPERATIONAL MACH DECAL WARNING 20 MPH TRANS LRG DECAL WARNING HIGH PRESSUR SML DECAL GREAT PLAINS W/LOGO DECAL SEED RATE 1 OF 2 DECAL SEED RATE 2 OF 2 DECAL CAUTION TIRE 36 PSI DECAL DANGER CRUSH TRCTR & 3PT DECAL LETTER E DECAL SEED LEVEL LH DECAL SEED LEVEL, NOTCHED DECAL LETTER F DECAL 3PT DRIVE TYPE LH VIEW DECAL 3PT DRIVE TYPE RH VIEW DECAL SCRIPT SOLID STAND SMALL DECAL REFLECTOR RED 1 1/2X9 DECAL REFLECTOR AMBER 1 1/2X and Below 2000 and below 2000 and above and below and above. Not shown and below and above and below and above and below and above and below and above and below. No longer available. Order part no C. No longer available. Order part no C and above and above. 2nd rev. 1st rev. 2nd rev. 1st rev. 2nd rev. 1st rev. 2nd rev. 1st rev. 2nd rev. 1st rev. 2nd rev. 1st rev. 2nd rev. 1st rev. 08/29/ P

24 Ball Valve Table of Contents Part Number Index P /29/17

25 Ball Valve Table of Contents Part Number Index Drill Boom Ref. Part No. Part Description Comments Revision dwg C V Image No. VALVE - 1FNPT BALL POLYPROP BANJO VALVE HANDLE 1/2-1 08/29/ P

26 Table of Contents Drill Boom Mounting Part Number Index P /29/17

27 Table of Contents Part Number Index Drill Boom Drill Boom Mounting Ref. Part No. Part Description Comments Revision dwg D H C C C C C D C C D D Image No. HANGER MOUNT 3PT HANGER WELDMENT WASHER FLAT 3/8 USS PLT WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT HHCS 3/8-16X1 1/4 GR5 U-BOLT 5/16-18 X 1 17/32X2 1/8 NOZZLE BRACKET NUT HEX WHIZ 1/ SS NUT HEX FLANGE 5/16-18 PLT 24' LH BOOM MOUNT TUBE 24' RH BOOM MOUNT TUBE Left hand. Right hand. 08/29/ P

28 Table of Contents Drill Boom Plumbing Part Number Index P /29/17

29 Table of Contents Part Number Index Drill Boom Drill Boom Plumbing Ref. Part No. Part Description Comments Revision dwg C C C R C C C D D C C C Image No. AD 1MNPT X 1HB POLYPROP VALVE - 1FNPT BALL POLYPROP CLAMP WRM DRV #12 SS( ) HOSE 1 ID 200PSI EPDM TEE 1HB POLYPROP AD 3/4MNPT X 1HB POLYPROP EL 3/4FNPT POLYPROP 126 WET BOOM TUBE 146 WET BOOM TUBE HHCS 5/16-18X1 1/2 GR5 NOZZLE BODY 3/4 WET BOOM CLAMP CA 3/4FNPT POLYPROP Refer to "Ball Valve" for breakdown. Left hand. Right hand. Refer to "Spraying Systems Check Valve ( C)" for breakdown. 08/29/ P

30 Table of Contents Part Number Index Spraying Systems Check Valve ( C) P /29/17

31 Table of Contents Part Number Index Drill Boom Spraying Systems Check Valve ( C) Ref. Part No. Part Description Comments Revision dwg V2B25F Image No. PRECISION CHECK VALVE FLY NUT PRECISION VITON DIAPHRAGM CHK O-RING SELF THREADING SCREW SS PRECISION RED NOZZLE CHK VALVE 08/29/ P

32 Table of Contents 7/9/2001 Jackshaft Drive Part Number Index P /29/17

33 Table of Contents Part Number Index Drive 7/9/2001 Jackshaft Drive Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C D C Image No. RHSNB 5/16-18X3/4 GR5 FLANGETTE 52 3-BOLT PLT BRG 7/8HEXX2.05OD SPH FLG TP LK 5/16-18ZNYCR WASHER LOCK SPRING 1/2 PLT NUT HEX JAM 1/2-13 PLT WASHER FLAT 1/2 USS PLT NO T IDLER SPKT. HHCS 1/2-13X4 1/2 GR5 CHAIN RL #40 89 PITCHES PIN ROLL 1/4 X 1 1/2 LG PLT 08/29/ P

34 Gauge Wheel Table of Contents Part Number Index P /29/17

35 Gauge Wheel Table of Contents Part Number Index Drive Ref. Part No. Part Description Comments Revision dwg C D C D D C C C C C C C C C C C C H H C C C D D C C C C C C K C D C C Image No. BOLT WHEEL 1/2-20X1 90-DEG HUB 6-BOLT 2 BORE 4.62 PILOT PIN SPIROL 1/2X2 1/2 PLAIN RPBY A AXLE SPACER TUBE SEAL DBL LIP 2.5 ID X OD BRG CONE 2.00ID TIM33889 BRG CUP 3.75OD TIM33821 SEAL X 2.0 X.438 CR20125 PIN ROLL 5/16 X 2 1/2 PLT SPKT 40B19X2B W/5/16 HOLE NUT BRG LOCK, TN-10 WASHER BRG LOCK, TW110 NUT LOCK 1/2-13 PLT HHCS 1/2-13X1 GR5 PIN COTTER 1/8 X 3/4 NO T IDLER SPKT. TWO PIN IDLER WELDMENT GAUGE WHEEL ARM GREASE ZERK STRAIGHT 1/4-28 NUT HEX JAM 5/8-11 PLT SCREW SQ HD 5/8-11X3 1/2 GR5 G.W. ARM EXTENDED CHAIN GUARD GAUGE WHEEL ARM CHAIN GUARD HHCS 1/4-20X5/8 GR5 WASHER LOCK SPRING 1/4 PLT WASHER FLAT 1/4 SAE PLT VALVE STEM TR415X.625X1 1/4 LG WHEEL 8 X 15 X 6 BOLT TIRE 11L-15 X 8 PLY RPBY K PIN COTTER 3/8 X 3 PLT KX W/ THD NUT HEX SLOTTED 1 1/2-12 PLT WASHER HARD 1 1/2 MILCARB GR8 (S/N FF1215-) (S/N FF1215-) (S/N FF1215-) Includes items 28, 29 and 30. (S/N FF1216+) (S/N FF1216+) (S/N FF1216+) 1st rev. 1st rev. 1st rev. 2nd rev. 2nd rev. 2nd rev. 08/29/ P

36 Table of Contents Gauge Wheel Drive Part Number Index P /29/17

37 Table of Contents Part Number Index Drive Gauge Wheel Drive Ref. Part No. Part Description Comments Revision dwg C C D H H C E S C C D C D C C C H C C D D C D C C C D D C V C D C C C C H S D D D D C C C C C D C C C C C C C S C Image No. PIN COTTER 5/32 X 1 1/4 LG WASHER FLAT 3/4 USS PLT PIN,3/4X3 1/4 USE W/3/16 HOLES ADJUSTMENT TUBE EYE BOLT ADJUSTMENT TUBE WLDMT NUT HEX JAM 1 1/4-7 LH THD PLT UPPER GAUGE WHEEL CLEVIS 3PT GW LINK ASSEMBLY HHCS 5/8-11X2 GR5 NUT HEX NYLOCK 5/8-11 PLT CHAIN RL # PITCHES SPKT 40C19 X 7/8 HEX BORE SPACER TUBE 1 ID X 1 3/16 SPKT 40C30 X 7/8 HEX BORE HHCS 1/2-13X1 3/4 GR5 WASHER FLAT 1/2 USS PLT GAUGE WHEEL BRAKE WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT SPACER TUBE 1 ID X 2 13/16 3 BOLT PIVOT CAST W/BRG SEAT SCREW SET 5/16-18 SKT KP X 3/8 COLLAR LOCK 7/8 HEX HHCS 1/2-13X4 GR5 NO T IDLER SPKT. NUT HEX JAM 1/2-13 PLT SPACER TUBE 1 ID X 4 11/16 GAUGE WHEEL UPPR SHAFT 7/8 HEX PIN ROLL 1/4 X 1 1/2 LG PLT BEARING.880 HEX BORE 205DD PIN LINCH 3/16 X 1 9/16 LONG SPEED CHANGE DRIVESHAFT 7/8HEX WASHER MACH 1.50 X 1.00 X 18GA SPKT 40C24 X 7/8 HEX BORE PIN COTTER 7/64 X 1 LONG WASHER FLAT 1/2 SAE PLT OFFSET DOUBLE IDLER WELDMENT OFFSET DOUBLE IDLER ASSY, SPKT IDLER BOLT PLATE CHAIN RL #40 84 PITCHES SPACER TUBE 1 ID X 7 1/8 CHAIN RL #40 94 PITCHES FLG TP LK 5/16-18ZNYCR BRG 7/8HEXX2.05OD SPH FLANGETTE 52 3-BOLT PLT RHSNB 5/16-18X1 1/4 GR5 SPKT 40B12 7/8 HEX BORE W/SS FEEDER CUP DRIVE SHAFT 7/8 HEX SPKT 40C36 X 7/8 HEX BORE SPKT 40C47 X 7/8 HEX BORE SPKT 40C15 X 7/8 HEX BORE NUT HEX 3/4-10 PLT WASHER LOCK SPRING 3/4 PLT U-BOLT 3/4-10 X 6 1/32 X 9 SNAP RING INT OD 3 BOLT PIVOT BEARING ASSY SPKT 40C37 X 7/8 HEX BORE Includes items 25, 35, 36 and 37. Includes items 21, 30 and /29/ P

38 Table of Contents Gauge Wheel Drive (continued) Part Number Index Ref. 58. Part No H Part Description GAUGE WHEEL MOUNT Comments Revision P /29/17

39 Table of Contents Part Number Index Drive Gauge Wheel Drive (continued) This Page Intentionally Left Blank 08/29/ P

40 Table of Contents Part Number Index Cross Hydraulic Cylinder 2.5 x 20 x 1.12 ( C) P /29/17

41 Table of Contents Part Number Index Markers Cross Hydraulic Cylinder 2.5 x 20 x 1.12 ( C) Ref. Part No. Part Description Comments Revision dwg D D D A A A A D D C2024 2A D A C Image No. CROSS TUBE CROSS ROD CROSS ROD CLEVIS CROSS NUT, CLEVIS & TIE ROD CROSS SCREW, CAP CROSS TIE ROD CROSS NUT, CLEVIS & TIE ROD CROSS HEAD BACKUP PISTON U-CUP ROD WIPER O-RING PISTON CROSS PISTON CROSS BASE CROSS NUT, PISTON CROSS PIN, CLEVIS (BASE END) RPBY C RPBY C Only found in seal kit item 18 Only found in seal kit item 18 Only found in seal kit item 18 Only found in seal kit item 18 08/29/ P

42 Table of Contents Flat Fold Dual Marker Hydraulics Part Number Index P /29/17

43 Table of Contents Part Number Index Markers Flat Fold Dual Marker Hydraulics Ref. Part No. Part Description Comments Revision dwg C C C C C C C C Image No. SP HH1/4R /8MNPT-W/AD CABLE TIE.31X21.5 6DIA 120LB PLASTIC HOSE LABEL HH1/4R /8MNPT 1/2MNPT EL 3/8FNPT 9/16MORB AD 3/8MNPT VALVE 3/8 NEEDLE CABLE TIE 2 DIA MIN - ORG 08/29/ P

44 Flat Fold Marker Table of Contents Part Number Index P /29/17

45 Flat Fold Marker Table of Contents Part Number Index Markers Ref. Part No. Part Description Comments Revision dwg H H H H H H H D D D D D D H H S C C C C C C C C C C C C C C C C C C H D D D H H C C C C C C C C C C C Image No. LH FIRST SECTION RH FIRST SECTION LIFT LUG CHANNEL LH LIFT LUG CHANNEL RH RPBY H 3 SECTION MARKER BREAKAWAY 24' F.F. MKR. 3RD. SECTION PIN 1 OD X 4.41 USABLE FIRST PIVOT SHAFT SECOND PIVOT SHAFT CYLINDER STOP STOP BUSHING MARKER TUBE 30 LG MARKER, L.H. MOUNT 96 MARKER, R.H. MOUNT 96 MARKER DISC & HUB ASSEMBLY GREASE ZERK STRAIGHT 1/4-28 SCREW SET SQ HD 1/2-13X1 GR5 HHCS 1/2-13X3 GR5 HHCS 5/16-18X2 GR5 HHCS 1/2-13X4 1/2 GR5 SPTHD HHCS 5/8-11X5 1/2 GR5 HHCS 3/8-16X2 GR2 NUT LOCK 5/16-18 PLT NUT LOCK 3/8-16 PLT NUT LOCK 1/2-13 PLT NUT HEX 1/2-13 PLT NUT LOCK 5/8-11 PLT NUT HEX JAM 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1/2 USS PLT WASHER FLAT 1 SAE PIN COTTER 3/16 X 2 CYL 2.5X20X1.12 ROD (TIE)1 PIN CHAIN BAR WELDMENT HINGE PIN CHAIN COIL 1/4 HIGH TEST 50 IN CHAIN BAR MARKER CARRIER MARKER TRANSPORT MOUNT HHCS 3/8-16X1 1/2 GR5 HHCS 3/8-16X3 1/4 GR5 HHCS 3/8-16X2 1/2 GR5 FTHD 5/16 X 1 1/4 UTILITY CLEVIS NUT HEX 5/8-11 PLT WASHER FLAT 3/8 USS PLT DECAL WARNING PINCH/CRUSH MRKR WASHER LOCK SPRING 5/8 PLT U-BOLT 1/2-13 X 2 X 3 GR 5 U-BOLT 5/8-11 X 6 1/32 X 7 3/4 U-BOLT 1/2-13 X 6 1/32 X 7 1/4 Shown Shown Shown Shown Refer to "Marker Disk Assembly ( S)" for breakdown. Refer to "Midway Hydraulic Cylinder 2.5 x 20 x 1.12 ( C)", "Cross Hydraulic Cylinder 2.5 x 20 x 1.12 ( C)" and "Monarch Hydraulic Cylinder 2.5 x 20 x 1.12 ( C)" for breakdown. 08/29/ P

46 Table of Contents Part Number Index Flat Fold Marker Sequence Valve Hydraulics P /29/17

47 Table of Contents Part Number Index Markers Flat Fold Marker Sequence Valve Hydraulics Ref. Part No. Part Description Comments Revision dwg C D C C C C C D C C C C C C D C C Image No. EL 3/8FNPT 9/16MORB HYD HOSE CLAMP LABEL CABLE TIE 2 DIA MIN - ORG HH1/4R /8MNPT 9/16FJIC HH1/4R /8MNPT 9/16FJIC HHCS 3/8-16X3/4 GR5 WASHER LOCK SPRING 3/8 PLT SEQUENCE VALVE MOUNT BRACKET HHCS 1/2-13X1 1/4 GR5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT VALVE,SEQUENCE SHOEMAKER EL 9/16MJIC 9/16FJIC CABLE TIE.31X28 8DIA 120LB HYD HOSE CLAMP BRACKET RHSNB 5/16-18X1 1/4 GR5 NUT HEX FLANGE 5/16-18 PLT Refer to "Sequence Valve ( C)" for breakdown. 08/29/ P

48 Table of Contents Marker Disc Assembly ( S) Part Number Index P /29/17

49 Table of Contents Part Number Index Markers Marker Disc Assembly ( S) Ref. Part No. Part Description Comments Revision dwg C C C C BO C C D H C C C C H D C C C C Image No. TINE GW HUB TINE GAUGE WHEEL HUB SEAL BEARING CONE 1 BEARING CUP L44610 NEILSON STUD 1/2-20UNFX1 13/16 RELIABLE HUB 4 BOLT GREASE CAP #1505 NUT LUG 1/2-20X60DEG PLT(.75AF BLADE SPACER 1 SPINDLE MARKER WELDMENT WASHER FLAT 3/4 SAE PLT NUT HEX SLOTTED 3/4-16 PIN COTTER 5/32 X 1 PLT 16 4-BOLT NOTCHED MARKER DISK DEPTH BAND 10 4-BOLT 4B.C. MARKER DISC SAFETY STRAP HHCS 3/8-16X1 GR5 NUT HEX 3/8-16 PLT WASHER FLAT 3/8 SAE PLT WASHER LOCK SPRING 3/8 PLT Includes /29/ P

50 Table of Contents Part Number Index Midway Hydraulic Cylinder 2.5 x 20 x 1.12 ( C) P /29/17

51 Table of Contents Part Number Index Markers Midway Hydraulic Cylinder 2.5 x 20 x 1.12 ( C) Ref. Part No. Part Description Comments Revision dwg M6006 2M3326 3R0310 4M3102 5M3128 6R0158 7M3328 2A0206 2A0132 2A0022 2A0012 2A C Image No. MW ROD CLEVIS MW ROD MW HEAD RPBY 4M3108 MW TUBE 2-1/2 X 20 CYLINDER BASE MIDWAY MIDWAY TIE ROD MW PIN SHORT MW PIN CLIP MW WIPER MW U-CUP MW O-RING MW BACKUP RPBY C RPBY C RPBY C SEAL KIT MW 2.5 CYL 3A3102 Only found in seal kit 17 Only found in seal kit 17 Only found in seal kit 17 Only found in seal kit 17 08/29/ P

52 Table of Contents Part Number Index Monarch Hydraulic Cylinder 2.5 x 20 x 1.12 ( C) P /29/17

53 Table of Contents Part Number Index Markers Monarch Hydraulic Cylinder 2.5 x 20 x 1.12 ( C) Ref. Part No. Part Description Comments Revision dwg C C C Image No. LION ROD CLEVIS 1 1/8-12UNF LION ROD 1.25 X 20 LION ROD CAP 2.5X1.25 9/16 ORB LION PISTON LION CYL. TUBE 2.5X20 H6080 LION CLEVIS CAP 2.5 LION TIE ROD 3/8X20 H6630 RIO LION PIN WIPER SEAL O-RING BACKUP RING O-RING BACKUP RING LION NUT 3/4UNC NUT HEX 3/8-16 PLT SCREW SET SH 3/8-16X3/8 TYPE C LION PIN CLIP-CLEVIS O-RING BACKUP RING LION PLUG SEAL KIT LN BX1.25RD Only found in seal kit 21 Only found in seal kit 21 Only found in seal kit 21 Only found in seal kit 21 Only found in seal kit 21 Only found in seal kit 21 Only found in seal kit 21 08/29/ P

54 Table of Contents Sequence Valve ( C) Part Number Index P /29/17

55 Table of Contents Part Number Index Markers Sequence Valve ( C) Ref. Part No. Part Description Comments Revision dwg C Image No. SHOEMAKER BODY MKR SEQ VALVE SHOEMAKER O-RING SHOEMAKER PLUG, HEX SOCKET SHOEMAKER NEEDLE,FLOW CONTROL SHOEMAKER.125 SPRING PIN SHOEMAKER SPRING COMPRESSION RPBY RPBY SEAL KIT SHOEMAKER SCREW, FLOW CON.ADJ. SHOEMAKER HEX, JAM NUT Z PLTD. RPBY SEAL KIT RPBY SEAL KIT RPBY SEAL KIT RPBY SEAL KIT SHOEMAKER O-RING SHOEMAKER FITTING PORT ADPT. SHOEMAKER HEX,SKT O-RING PLUG SHOEMAKER O-RING RPBY SHOEMAKER SPOOL,MKR SEQ..055 SEAL KIT SHOEMAKER # /29/ P

56 Table of Contents 10" Feeder Cup Spacing Part Number Index P /29/17

57 Table of Contents Part Number Index Metering System 10" Feeder Cup Spacing Ref. Part No. Part Description Comments Revision dwg K D D D C C C D D D D K Image No. 24'3PT FEDRCUP TRAY 10 ASSY RH BOX DIVIDER FOR 10 ROW 24'3PT FEEDERCUP TRAY 10 RH 2SNT SEED BOX DIVIDER CLIP 5/8 SHAFT LOCKING COLLAR SCREW SET 5/16-18 SKT KP X 3/8 PIN ROLL 3/16X1 1/4 PLT MACHINED ADJUSTMENT SPOOL SQ. BAR 5/8 CR X /32 185C058TUBE X '3PT FEEDERCUP TRAY 10 12'3PT FEEDRCUP TRAY 10 ASSY 08/29/ P

58 Table of Contents 6" And 7" Feeder Cup Spacing Part Number Index P /29/17

59 Table of Contents Part Number Index Metering System 6" And 7" Feeder Cup Spacing Ref. Part No. Part Description Comments Revision dwg K D D D D C C D D D D C D D D K D D D K D K Image No. 24'3PT FEDRCUP TRAY 6 ASSY RH 3 BOX DIVIDER FOR 4 7/8 ROW SEED BOX DIVIDER HALF CLIP LH SEED BOX DIVIDER HALF CLIP RH SQ. BAR 5/8 CR X /32 5/8 SHAFT LOCKING COLLAR SCREW SET 5/16-18 SKT KP X 3/8 SPACER TUBE X '3PT FEEDERCUP TRAY 6 RH 2SNT SEED BOX DIVIDER CLIP BOX DVDR 5.13 X 60DEG PIN ROLL 3/16X1 1/4 PLT 6 5/8 BOX DVDER FOR 8 1/2 ROW BOX DVDR 4.00 X 60DEG SPACER TUBE X '3PT FEEDRCUP TRAY 6 ASSY 12'3PT FEEDERCUP TRAY 6 24'3PT FEEDERCUP TRAY 7 RH SPACER TUBE X '3PT FEEDRCUP TRAY 7 ASSY 12'3PT FEEDERCUP TRAY 7 24'3PT FEDRCUP TRAY 7 ASSY RH 08/29/ P

60 Table of Contents 7 1/2" And 8" Feeder Cup Spacing Part Number Index P /29/17

61 Table of Contents Part Number Index Metering System 7 1/2" And 8" Feeder Cup Spacing Ref. Part No. Part Description Comments Revision dwg K D D D D D D D D C C D C D D D D K D K D D D D K D Image No. 24'3PT FEDRCUP TRAY 7.5 ASY RH 5 5/8 BOX DVDR FOR 7 1/2 ROW SPACER TUBE X '3PT FEEDERCUP TRAY 7 1/2 RH 2SNT SEED BOX DIVIDER CLIP BOX DVDR 4.00 X 60DEG SEED BOX DIVIDER HALF CLIP RH SEED BOX DIVIDER HALF CLIP LH SQ. BAR 5/8 CR X /32 5/8 SHAFT LOCKING COLLAR SCREW SET 5/16-18 SKT KP X 3/8 SPACER TUBE X PIN ROLL 3/16X1 1/4 PLT BOX DVDR 5.13 X 60DEG 6 5/8 BOX DVDER FOR 8 1/2 ROW SPACER TUBE X MACHINED ADJUSTMENT SPOOL 12'3PT FEEDRCUP TRAY 7.5 ASSY 12'3PT FEEDERCUP TRAY 7 1/2 24'3PT FEDRCUP TRAY 8 ASSY RH BOX DVDR 6.13 X 60DEG FEEDER CUP SPACER 24'3PT FEEDERCUP TRAY 8 RH SPACER TUBE X '3PT FEEDRCUP TRAY 8 ASSY 12'3PT FEEDERCUP TRAY 8 08/29/ P

62 Table of Contents Feeder Cup Channel Part Number Index P /29/17

63 Table of Contents Part Number Index Metering System Feeder Cup Channel Ref. Part No. Part Description Comments Revision dwg C C C S D D C C C C C C C C C C C D D C C C C C C D C C C C C C Image No. FEEDER CUP CHANNEL FEEDER CUP SHAFT SPACER TUBE BOX DIVIDER PM SEED CUP SPROCKET SEED CUP ASSEMBLY SEED CUP SLEEVE FEEDER CUP BEARING ASSEMBLY BEARING HUB 40A15 FEEDER CUP BEARING HOUSING BRG 30IDX55OD MM SNAP RING EXT BASIC 1 3/16 SNAP RING INTERNAL NUT HEX WHIZ 1/4-20 PLT 5/8 SHAFT LOCKING COLLAR SCREW SET 5/16-18 SKT KP X 3/8 WASHER RETAINING NUT-HEX 1/4-20 PLT CLUTCH DRIVE PLATE CUSHION NUT HEX LOCK 1/4-20 FLG HFSS 1/4-20X5/8 GR5 SEED BOX DIVIDER HALF CLIP RH SEED BOX DIVIDER HALF CLIP LH HHCS 3/8-16X3/4 GR5 WASHER LOCK SPRING 3/8 PLT WASHER FLAT 3/8 SAE PLT WASHER LOCK SPRING 1/4 PLT HHCS 1/4-20X3/4 GR5 SCR SELF TAP 8X3/8 TYPE25 BT 2SNT SEED BOX DIVIDER CLIP SEED CUP ADJUSTMENT HANDLE SEED CUP RIGHT HALF SEED CUP DOOR SEED CUP LEFT HALF NYLON WASHER-SPLIT SEED CUP WASHER RETAINER See "6" and 7" Feeder Cup Spacing" through "10" Feeder Cup Spacing". See "6" and 7" Feeder Cup Spacing" through "10" Feeder Cup Spacing". See "6" and 7" Feeder Cup Spacing" through "10" Feeder Cup Spacing". See "6" and 7" Feeder Cup Spacing" through "10" Feeder Cup Spacing". 08/29/ P

64 Table of Contents Part Number Index Loup Shaft Monitor (2 Channel A) (3 Channel A) P /29/17

65 Table of Contents Part Number Index Metering System Loup Shaft Monitor (2 Channel A) (3 Channel A) Ref. Part No. Part Description Comments Revision dwg C C C D C D C C Image No. HFSS 1/4-20X3/4 GR5 HOSE CLIP 5/8 I.D. NUT HEX LOCK 1/4-20 FLG CABLE TIE, NYLON MAGNET, ADHESIVE BACKED, LARGE NUT HEX JAM, PLASTIC M16 X 2 SHAFT SENSOR MOUNT SCR SELF TAP #10 X 3/4 LOUP SHAFT SENSOR 2&3 CHANNEL SMALL CUP SENSOR MOUNT LOUP 3 CHANNEL SHAFT MONITOR LOUP 2 CHANNEL SHAFT MONITOR SHAFT MONITOR EXT. 30' 6P WP HARNESS 3 SHAFT MONITOR LOUP LOUP 3 CHANNEL SHAFT MONITOR SHAFT MONITOR EXT. 25' 4P WP HARNESS 2 SHAFT MONITOR LOUP 08/29/ P

66 Seed Rate Handle Table of Contents Part Number Index P /29/17

67 Table of Contents Part Number Index Metering System Seed Rate Handle Ref. Part No. Part Description Comments Revision dwg H H H C C C C C C C C C C D C C C C C C C C C C D C C C Image No. SEED RATE ADJ WLDMNT SEED RATE ADJ HANDLE WLDMNT ADJ LOCK PLATE ASS'Y - 1 1/2 W NAME PLATE ADJ. GUIDE LONG NUT WING 1/2-13 PLT WASHER ADJ HANDLE BRG BRG BALL 17IDX40OD 6203 SNAP RING EXT 17 MM HHCS 3/8-16X3/4 GR5 WASHER LOCK SPRING 3/8 PLT WASHER FLAT 5/8 SAE PLT WASHER MACH 1.19 X.63 X 18GA PIN COTTER 3/16 X 1 1/4 PLT ADJUSTMENT HANDLE PIVOT HHCS 5/16-18X3/4 GR5 WASHER FLAT 5/16 SAE PLT WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT SCREW RD HD 8-32 X 3/8 BRASS WASHER FLAT #8 BRASS WASHER INTERNAL STAR #8 BRASS NUT HEX 8-32 BRASS WASHER FLAT 3/8 SAE PLT WASHER RETAINING MACHINED ADJUSTMENT SPOOL 5/8 SHAFT LOCKING COLLAR PIN ROLL 3/16X1 1/4 PLT SCREW SET 5/16-18 SKT KP X 3/8 08/29/ P

68 Table of Contents Option 00 Straight Arm Opener Part Number Index (Applies to 2400 only) P /29/17

69 Table of Contents Part Number Index Openers Option 00 Straight Arm Opener (Applies to 2400 only) Ref. Part No. Part Description Comments Revision dwg C C C D D A D C C C C D C C H D C C C C C V C C S S D C C D C D C C C C C C C C C C C H C A C D S Image No. U-BOLT 3/8-16 X 2 X 2 3/4 WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT SPRING ROD CASTING CLIP CASTING DOUBLE SPRING ROD SPRING CASTING MTG ASS'Y STRAIGHT ARM OPENER SPRING ROD HHCS 1/4-20X3/4 GR5 WASHER LOCK SPRING 1/4 PLT NUT-HEX 1/4-20 PLT SPRING COMP 13/16IDX.156WX19.5 DISC SPRING BAR WIRE CLIP CLAMP HOSE 1 5/8 NO. 26 SEED HOSE 30 RIBS X 7 1/2 LG OPENER WELDMENT - SHORT 94 STRAIGHT ARM OPENER MOUNT RHSNB 1/2-13X5 1/2 GR5 NUT HEX FLG. LOCK 1/2-13 PLT. U-BOLT 1/2-13X3 1/32X4 FLAT DISK BLADE-4MM THICK DISK BLADE 3MM 13.5 DIA BEARING AA205DD HSG RIBB FLG 6BOLT PLT RIVET,BUTTON HEAD 1/4 X 1/2 DISK BLADE ASY 3MM 13.5 DIA DD W/205 BRG-PLD FLNG-4MM DD BRG FLANGE DUST COVER HHCS 5/8-11X1 1/2 GR5 NYL WASHER FLAT 3/8 SAE PLT D.D. SLOTTED SCRAPER CLAMP HOSE 1 1/2 NO. 24 STRAIGHT ARM OPENER PIVOT PIPE HFS 3/8-16X3 3/4 SPTHD NUT FLANGE LOCK 3/8-16 PLT PARALLEL ARM PIVOT BUSHING WASHER MACH 1.19 X.63 X 18GA RHSNB 3/8-16X1 GR5 OPENER SEED TUBE, PLASTIC SCREW HEX SLT10-16X1/2P.THD CT NUT HEX WHIZ 1/2-13 NUT HEX 5/16-18 PLT WASHER LOCK SPRING 5/16 PLT WASHER FLAT 5/16 SAE PLT 10 1/2 DEPTH BAND WLMT RHSNB 5/16-18X3/4 GR5 10 1/2 DEPTH BAND BUNDLE SEED FLAP, RUBBER, SEED-LOK HEX SEED FLAP MOUNTING CLIP SEED FLAP & HEX CLIP, SEEDLOK Includes items 1 through 5. Includes items Includes items Includes items 39 through 43. Includes items 45 & /29/ P

70 Table of Contents Option 10 Parallel Arm Opener Part Number Index (Applies to 2410 only) P /29/17

71 Table of Contents Part Number Index Openers Option 10 Parallel Arm Opener (Applies to 2410 only) Ref. Part No. Part Description Comments Revision dwg C C D C C V C H H C H C D H H D C C C C C C C C C D H D C D D C C C C S S C C D C D C C C C H C A C D S Image No. HHCS 5/8-11X1 1/2 GR5 NYL WASHER MACH 1.19 X.63 X 18GA DD BRG FLANGE DUST COVER HSG RIBB FLG 6BOLT PLT RIVET,BUTTON HEAD 1/4 X 1/2 BEARING AA205DD DISK BLADE 3MM 13.5 DIA PARALLEL LINKAGE OPENER WELD BOTTOM PARALLEL ARM WELDMENT NUT HEX FLG. LOCK 1/2-13 PLT. TOP PARALLEL ARM WELDMENT SPRING EXT 1 5/8OD X 6.6X.177 REAR PARALLEL ARM PIVOT TUBE 3PT PAR ARM OPENER REAR MNT 3PT PAR ARM OPENER FRNT MNT PARALLEL OPENER MOUNT PLATE NUT HEX 5/8-11 PLT WASHER LOCK SPRING 5/8 PLT HFS 1/2-13 X 5 1/4 HFS 1/2-13 X 5 1/2 PARALLEL ARM PIVOT BUSHING RHSNB 5/8-11 X 4 1/2 GR5 NUT HEX 3/8-16 PLT WASHER LOCK SPRING 3/8 PLT CASTING SPRING ADJUST SPRING ADJUSTMENT CASTING 3PT PAR ARM OPNER EXTENDED MNT SPRING ADJUST PIVOT TUBE HHCS 3/8-16X3 1/2 GR5 SPRING ADJUST PLATE RH SPRING ADJUST PLATE LH SCREW HEX SLT10-16X1/2P.THD CT CLAMP HOSE 1 5/8 NO. 26 END WHEEL NO-TILL SEED HOSE CLAMP HOSE 1 1/2 NO. 24 DISK BLADE ASY 3MM 13.5 DIA DD W/205 BRG-PLD FLNG-4MM WASHER FLAT 3/8 SAE PLT RHSNB 3/8-16X1 GR5 D.D. SLOTTED SCRAPER OPENER SEED TUBE, PLASTIC FRONT PARALLEL ARM PIVOT TUBE U-BOLT 3/8-16 X 6 1/32 X 7 NUT HEX 5/16-18 PLT WASHER LOCK SPRING 5/16 PLT WASHER FLAT 5/16 SAE PLT 10 1/2 DEPTH BAND WLMT HHCS 7/16-14X1 1/2 GR5 10 1/2 DEPTH BAND BUNDLE SEED FLAP, RUBBER, SEED-LOK HEX SEED FLAP MOUNTING CLIP SEED FLAP & HEX CLIP, SEEDLOK 1st Revision 2nd Revision 08/29/ P

72 Table of Contents Option 20 Series Opener Part Number Index (Applies to 2420 only) P /29/17

73 Table of Contents Part Number Index Openers Option 20 Series Opener (Applies to 2420 only) Ref. Part No. Part Description Comments Revision dwg H H H H C D C C C H C D C C C C C C S S C D C C S C C C C C S C H H C D C C C D C C C C Image No. 20 SER OPENER BODY WLMT FRONT MOUNT DC OPENER 20 SER OPNR UPPER PAR ARM WLMT 20 SER OPNR LOWER PAR ARM WLMT PARALLEL ARM PIVOT BUSHING FRONT PARALLEL ARM PIVOT TUBE HFS 1/2-13 X 5 3/4 NUT HEX FLG. LOCK 1/2-13 PLT. SPRING EXT 1.575O.D.X.225 WIRE 20 SER OPNR SPRING MNT WLMT PIN OPENER SPRING 4 1/6 USABLE 20 SER OPNR PW CAM PRESS WHEEL ARM PIVOT BUSHING CASTING - STAINLESS T-HANDLE SPRING COMP 5/8 OD X 1 3/4 LG WASHER FLAT 3/8 SAE PLT PIN ROLL 3/16 X 2 1/2 LG. PTL. 20 SER OPNR PLASTIC SEED GUIDE DISK BLADE ASY 3MM 13.5 DIA DD W/205 BRG-PLD FLNG-4MM WASHER MACH 1.19 X.63 X 18GA DD BRG FLANGE DUST COVER HHCS 5/8-11X1 1/2 GR5 NYL BRG INS.63IDX1.57OD DBL LIP 20 SER OPNR DEPTH WHL ARM ASSY HHCS 5/8-11X2 1/2 GR5 NYL WASHER LOCK SPRING 5/8 PLT HHCS 3/8-24X2 1/4 GR8 BLK WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-24 GR8 BLK 2X13 DEPTH WHEEL ASSY PIN COTTER 1/8 X 3/4 REAR MOUNT DC OPENER EXTENDED REAR DC OPNR MOUNT SNAP RING EXT 5/8.050 T 20 SER OPNR CAM PIN END WHEEL NO-TILL SEED HOSE CLAMP WRM DRV #16 SS ( ) RHSNB 3/8-16X1 GR5 OPENER SCRAPER NUT HEX 3/8-16 PLT U-BOLT 3/8-16 X 6 1/32 X 7 U-BOLT 5/8-11 X 3 1/32 X 4 1/2 NUT HEX 5/8-11 PLT Two springs used with 1 x 10 press wheel. One spring used with 1 x 12 press wheel. 08/29/ P

74 Table of Contents Seed-Lok, (Option) Part Number Index P /29/17

75 Table of Contents Part Number Index Openers Seed-Lok, (Option) Ref. Part No. Part Description Comments Revision dwg H D D C S C C C C C C C C A D C C H C Image No. DC RMVBL SD-LOK MNT WLDMT 5 SEED-LOK WHL ARM PIVOT PIN 20 SERIES SEED LOCK ARM SFHCS 3/8-16X3/4 82 DEGREE SD-LK 203 BEARING WHEEL ASSY SPRING, 1 O.D.X.125WIREX 3 1/2 RING SNAP EXTERNAL '"E'" 1/2 HHCS 3/8-16X1 GR5 WASHER FLAT 3/8 SAE PLT WASHER LOCK SPRING 3/8 PLT 5/8 X 5 SEED FIRMING WHEEL RETAINER W/BONDED SEAL 4BLT SCR PH THD FMG #10X1/2 TP ZP RPBY V SEED-LOK ARM (1994) SCR HX SKT BUT CP 3/8-16X3/4 WASHER INTERNAL STAR 3/8 PLT. SS RMVBL SD-LOK MNT WLDMT SEED LOK TIE UP 20 Series Opener 20 Series Opener 20 Series Opener Includes 6 bearings. 00 & 10 Series Openers 00 & 10 Series Openers 00 & 10 Series Openers 00 & 10 Series Openers 00 & 10 Series Openers 08/29/ P

76 Wiper Wheel Table of Contents Part Number Index P /29/17

77 Wiper Wheel Table of Contents Part Number Index Openers Ref. Part No. Part Description Comments Revision dwg C V C C D C C C C C C S C D C C S S A Image No. RPBY C BEARING AA205DD HSG RIBB FLG 6BOLT PLT RIVET,BUTTON HEAD 1/4 X 1/2 DD BRG FLANGE DUST COVER HFSS 5/16-18X1/2 GR5 2X13 D.W. OUTER RIM HALF 2X13 SIDE DEPTH TIRE BRG INS.63IDX1.57OD DBL LIP 2X13 D.W. INNER RIM HALF NUT HEX WHIZ 5/16-18 PLT 2X13 DEPTH WHEEL ASSY RHSNB 5/16-18X3/4 GR5 20 SER SIDE DEPTH WL STIFF PLT HHCS 5/8-11X1 1/2 GR5 NYL WASHER MACH 1.19 X.63 X 18GA RPBY S BLADE UPDATE HARDWARE 13 1/2 BLADE UDPATE-1/4 RIVETS Includes items 1 through 4. Includes items 5, 15 and 16. Includes items 17 and /29/ P

78 Table of Contents Part Number Index 1" x 10" Double "V" Press Wheel (10/1/2000+) P /29/17

79 Table of Contents Part Number Index Press Wheels 1" x 10" Double "V" Press Wheel (10/1/2000+) Ref. Part No. Part Description Comments Revision dwg H C D D C C C C C C C C C C C C C C C C Image No. 20 SERIES 1X10 PRESS WHEEL MNT PIN CLEVIS 7/16 X 3 PLT PW HANDLE SPACER TUBE DG HANDLE PIN COTTER 1/8 X 3/4 1X10 PRESS WHEEL ASSEMBLY HHCS 7/16-14X1 1/2 GR5 WASHER LOCK 7/16 PLT WASHER FLAT 7/16 SAE PLT BUSHING 3/4OD X 5/8ID X 1/2 LG 20 SER PW ARM PIVOT SPACER TB SPRING EXT 1 5/8 OD X 8.2 NUT HEX FLANGE LOC 7/16-14 PLT HFSS 1/4-20X5/8 GR5 1X10 PRESS WHEEL RIM HALF BRG.63ID PRESS WHL ASY 1X10 PRESS WHEEL TIRE NUT HEX LOCK 1/4-20 FLG HHCS 5/8-11X2 1/2 GR5 WASHER LOCK SPRING 5/8 PLT 08/29/ P

80 Table of Contents Part Number Index 1" x 10" Double "V" Press Wheel (9/30/2000-) P /29/17

81 Table of Contents Part Number Index Press Wheels 1" x 10" Double "V" Press Wheel (9/30/2000-) Ref. Part No. Part Description Comments Revision dwg S C C C C C H C C C C D D C C C C C C C Image No. 1 X 10 PRESS WHEEL ASSY NUT HEX LOCK 1/4-20 FLG 1X10 P.W. RIM HALF 1X10 PRESS WHEEL TIRE INSERT SINGLE ENDED SFT HFSS 1/4-20X5/8 GR5 DC 1 X 10 DBL V PW ARM WMNT SCREW SQ HD SET 3/8-16X7/8 PLT NUT HEX JAM 3/8-16 PLT PIN CLEVIS 7/16 X 3 PLT PIN COTTER 1/8 X 3/4 PW HANDLE SPACER TUBE DG HANDLE HHCS 7/16-14X1 1/2 GR5 WASHER FLAT 7/16 SAE PLT BUSHING 3/4OD X 5/8ID X 1/2 LG SPRING EXT 1 5/8 OD X 8.2 WASHER LOCK 7/16 PLT NUT HEX FLANGE LOC 7/16-14 PLT 20 SER PW ARM PIVOT SPACER TB 08/29/ P

82 Table of Contents 1" x 12" Double "V" Press Wheel Part Number Index P /29/17

83 Table of Contents Part Number Index Press Wheels 1" x 12" Double "V" Press Wheel Ref. Part No. Part Description Comments Revision dwg D D C D D C C C C H C C C C C Image No DG HANDLE REP BY D PIN COTTER 1/8 X 3/4 1X12 PW PIN CLEVIS 7/16X2 3/16 1X12 PW 1/2 SPACER SPRING EXT 1 5/8 OD X X 12 PRESS WHL ASSY-5203BRG WASHER LOCK SPRING 5/8 PLT HHCS 5/8-11X2 1/2 GR5 1X12 PW OPENER PW MOUNT HHCS 7/16-14X1 1/2 GR5 WASHER LOCK 7/16 PLT WASHER FLAT 7/16 SAE PLT BUSHING 3/4OD X 5/8ID X 1/2 LG 20 SER PW ARM PIVOT SPACER TB 08/29/ P

84 Table of Contents 1" x 12" Double Press Wheel Part Number Index P /29/17

85 Table of Contents Part Number Index Press Wheels 1" x 12" Double Press Wheel Ref. Part No. Part Description Comments Revision dwg C C C C C C C C H C D C C C C C C C S Image No. HHCS 5/8-11X2 1/2 GR5 WASHER LOCK SPRING 5/8 PLT HHCS 1/4-20X1 GR5 1 X 12 PRESS WHEEL RIM HALF BRG.63ID PRESS WHL ASY TIRE RUBBER 1 X 12 NUT HEX LOCK 1/4-20 FLG 1 X 12 PRESS WHL ASSY-5203BRG 98 1X12 PRESS WHEEL WELDMENT PARALLEL ARM PIVOT BUSHING PRESS WHEEL PIVOT TUBE PIN CLEVIS 3/8 X 2 1/8 USABLE SPRING.540 O.D.X 1 1/4 X.054W OPENER TRUNION HFS 1/2-13X3 3/4 GR5 SPTHD NUT HEX FLG. LOCK 1/2-13 PLT. T-HANDLE ASSEMBLY PIN ROLL 5/32 X 5/8 PLT PW ADJUSTMENT TRUNNION ASSY Includes items 3 through 7. Includes items 12, 13, 14, 17 and /29/ P

86 Table of Contents 1" x 12" Press Wheel Part Number Index P /29/17

87 Table of Contents Part Number Index Press Wheels 1" x 12" Press Wheel Ref. Part No. Part Description Comments Revision dwg C C C C C H D C D C C C C C C C C C C C Image No. 20 SER PW ARM PIVOT SPACER TB HHCS 7/16-14X1 1/2 GR5 WASHER LOCK 7/16 PLT WASHER FLAT 7/16 SAE PLT BUSHING 3/4OD X 5/8ID X 1/2 LG 1X12 PW OPENER PW MOUNT DG HANDLE PIN COTTER 1/8 X 3/4 LONG 1X12 PW HANDLE SPACER TB 1 X 12 PRESS WHL ASSY-5203BRG SPRING EXT 1 5/8 OD X 8.2 WASHER MACH 1.19 X.63 X 18GA PIN CLEVIS 7/16 X 2 9/64 USABL WASHER LOCK SPRING 5/8 PLT HHCS 5/8-11X2 1/2 GR5 TIRE RUBBER 1 X 12 1 X 12 PRESS WHEEL RIM HALF BRG.63ID PRESS WHL ASY HHCS 1/4-20X1 GR5 NUT HEX LOCK 1/4-20 FLG 08/29/ P