Parts Manual YP625A3PP. Yield-Pro Peanut Planter with Air-Pro Meters. Copyright 2018 Printed 04/26/ P

Transcription

1 Table of Contents Parts Manual Yield-Pro Peanut Planter with Air-Pro Meters YP625A3PP Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! Cover illustration may show optional equipment not supplied with standard unit. Copyright 2018 Printed 04/26/ P

2 Table of Contents Table of Contents Section 1: Introduction...4 Using This Manual...4 Manual Replacement Information...4 Manual Revisions...4 Touch-up Paint...4 Hardware Legend...5 Replacement Hardware...5 Serial Numbers...5 Part Number Service Coding...5 Frame...6 Frame...6 Air Pressure Assembly...8 Fan Mounting...10 Lights...12 Smartbox Mounting...14 Drive...16 Contact Wheel Assembly...16 Transmission Exterior...20 Transmission Interior...22 Sprocket Storage...24 Meter...26 Meter...26 Openers...28 Opener Arms & Mounts...28 Opener Body...30 Hopper Mounting Series Keeton Seed Firmer (Option)...36 Hub Assembly ( C & S)...38 Seed Lok 6" Assy. ( K) Series Side Depth Wheel Scraper Assembly...42 Press Wheels...44 Press Wheel Assembly 1X12 & 1.25X D Cast Press Wheels...46 Press Wheel Assembly With Spider Wheels...48 Closing Wheel Drop mount...50 Press Wheel Breakdown...52 Hydraulics...54 Fan Hydraulics...54 Hydraulic Hose Grips...56 Monitor...58 Monitor...58 Liquid Fertilizer...60 Liquid Fertilizer Mounting...60 VisaGauge Valve Assembly ( D)...62 Decals...64 Decal Placement Copyright 2018 All rights reserved Printed 04/26/18 Great Plains Manufacturing, Inc. provides this publication as is without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. Great Plains Manufacturing, Incorporated Trademarks The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains All other brands and product names are trademarks or registered trademarks of their respective holders. Printed in the United States of America P /26/18

3 Table of Contents Alphabetized Table of Contents Selected Models D Cast Press Wheels...46 V VisaGauge Valve Assembly ( D) Series Keeton Seed Firmer (Option) Series Side Depth Wheel Scraper Assembly...42 A Air Pressure Assembly...8 C Closing Wheel Drop mount...50 Contact Wheel Assembly...16 D Decal Placement...64 F Fan Hydraulics...54 Fan Mounting...10 Frame...6 H Hopper Mounting...34 Hub Assembly ( C & S)...38 Hydraulic Hose Grips...56 L Lights...12 Liquid Fertilizer Mounting...60 M Meter...26 Monitor...58 O Opener Arms & Mounts...28 Opener Body...30 P Press Wheel Assembly 1X12 & 1.25X Press Wheel Assembly With Spider Wheels...48 Press Wheel Breakdown...52 S Seed Lok 6" Assy. ( K)...40 Smartbox Mounting...14 Sprocket Storage...24 T Transmission Exterior...20 Transmission Interior /26/ P

4 Table of Contents P /26/18

5 Table of Contents 04/26/ P

6 Frame Table of Contents P /26/18

7 Frame Table of Contents Frame Ref. Part No. Part Description Comments Revision dwg H D D C C C C D C C C H C C H C R Image No. TOOLBAR W/A AIR IN FRAME CATEGORY PT BUSHING 3-PT SIDE PLAY BUSHING PIN HTCH 1.0X3.38 USBL W/PIN PIN HTCH 1.13X8.50 USBL U-BOLT 5/8-11 X 7 1/32 X 8 1/2 HHCS 3/8-16X1 GR5 END CAP TUBE END CAP GASKET 7 X 7 PIN SPIROL 3/8X2 1/2 PLAIN PIN HTCH.5X3.50 USBL FRAME STAND MOUNT WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT FRAME SUPPORT STAND WELD CLAMP WRM DRV #32SS (1.56-5) HOSE 2 ID POLYP HELIX 04/26/ P

8 Table of Contents Air Pressure Assembly P /26/18

9 Table of Contents Frame Air Pressure Assembly Ref. Part No. Part Description Comments Revision dwg C C C D R S C C C C C C C C Image No. MAGNEHELIC PRES GAGE-0-6 INH2O AD 1/8MNPT X 1/4HB BRASS CLAMP SPRING BAND 1/2 OD HOSE PRESSURE GAUGE FAN MOUNT HOSE 1/4 RUBBER AIR SENSOR CHAMBER ASY AD 7/16MORB X 1/4HB NUT HEX JAM 7/16-20 PLT U-BOLT 3/8-16 X 7 1/32 X 7 7/8 WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT CLAMP, 5" OD NUT HEX FLG 3/8-16 GR8 ZNYCR PL 1/4MNPT 04/26/ P

10 Fan Mounting Table of Contents P /26/18

11 Fan Mounting Table of Contents Frame Ref. Part No. Part Description Comments Revision dwg H C C C C C C C C C C C C C C C D D S C D D C C C D D C C C C C C C D C C C C Image No. TOOLBAR W/A AIR IN FRAME MAGNEHELIC PRES GAGE-0-6 INH2O AD 1/8MNPT X 1/4HB BRASS BREATHER FILTER VENT 1/8 NPT HHCS 3/8-16X1 GR5 WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT BOLT, 1/4-20X3/4 HWH GR5 CZP HHCS 3/8-16X1 1/4 GR5 HYDRAULIC MOTOR MOUNT PLT WASHER FLAT 5/16 USS PLT HUB/MOTOR PLATE SEAL (2B) EL 3/4FJIC 3/4MJIC TE 3/4MJIC AD 7/8MORB 3/4FJIC HH1/2R /4FJIC TE 3/4MORB 3/4MJIC 3/4MJIC VALVE LINE CHECK PRESSURE GAUGE FAN MOUNT 6" FAN SCREEN CAP SCREW #14X1/2 HWH T-AB ZP WELDMENT, SCREEN DJ FAN SENSOR MOUNT BRKT DJ FAN RPM SENSOR THRD HALL HYD MOTOR 7/8ORBF CASTING 6 FAN HOUSING RH SIDE BUSHING 20MM 13 FAN IMPELLER CASTING 6 FAN HOUSING LH SIDE METER SPACER TUBE CRARY FAN SHUTTER SLOT PLATE WASHER FLAT 1/4 SAE PLT HHCS 1/4-20X1 1/2 GR5 SCREW RD HD X 1 PLT CRARY FAN SHUTTER SHAFT CRARY FAN SHUTTER DISK NUT HEX NYLOCK PLT HFSS 1/4-20X1 GR5 NUT HEX FLANGE 1/4-20 PLT FLAT WASHER 1/4 CRARY 6" FLANGED FAN U-BOLT 3/8-16 X 7 1/32 X 7 7/8 NUT HEX 1/4-20 PLT WASHER LOCK SPRING 1/4 PLT MANUAL PAK MOUNT PLATE 14 GA MINI END WHEEL PRESS WHEEL MANUAL PAK 1" W/ GASKET HHCS 1/4-20X1 GR5 WASHER FLAT 3/8 SAE PLT 04/26/ P

12 Lights Table of Contents P /26/18

13 Lights Table of Contents Frame Ref. Part No. Part Description Comments Revision dwg C D C C C C C C C C C C C Image No. LIGHT, AMBER LAMP LED SINGLE LIGHT MOUNTING BRACKET SCREW HEX SELF TAP 1/4-20X3/4 HHCS 3/8-16X1 GR5 WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT CABLE TIE.19X D 50LB LIGHT, RED LAMP - LED LIGHT 16' A 11' R WISHBONE LED LIGHT HARNESS, 15' LEAD - LED LIGHT HRNSS ENHANCE MODULE LED NUT HEX LOCK 1/4-20 FLG HHCS 1/4-20X1 3/4 GR5 04/26/ P

14 Table of Contents Smartbox Mounting P /26/18

15 Table of Contents Frame Smartbox Mounting Ref. Part No. Part Description Comments Revision dwg H C C C Image No. PEANUT SMARTBOX MOUNT WMT NUT HEX 3/8-16 PLT WASHER LOCK SPRING 3/8 PLT U-BOLT 3/8-16 X 7 1/32 X 7 7/8 04/26/ P

16 Table of Contents Contact Wheel Assembly P /26/18

17 Table of Contents Drive Contact Wheel Assembly Ref. Part No. Part Description Comments Revision dwg C C C H C D D C D D D D C C C C C K C D C D D D C C D D H C C C C C C C C C D C C R C D C C H D C C C C C D C D C Image No. HHCS 1/2-13X1 1/2 GR5 3-BOLT PIVOT CASTING NUT HEX FLG LOCK 1/2-13 PLT 30FT GA WHL MOUNT WLDMT REAR DECAL CAUTION TIRES NOT A STEP LINK, ADJUSTMENT LINK SPRING THRUST WASHER HHCS 3/4-10X1 1/2 GR5 NYL SLEEVE SPRING LINK MOUNT BLOCK MOUNTING 9.8 LONG ADJUSTMENT ROD LINK ADJUSTMENT WASHER NUT ACME THD 1-5 BUSHING CYL 1 1/4 X 1 X 1 SPRING COMP 69X3.25X.375W GREASE ZERK STRAIGHT 1/4-28 GREASE ZERK 1/4-28 X 90-DEG GAUGE WHEEL DRIVE ASM SNAP RING INT 05 OD 7/8 HEX SHAFT SPACER X.650 HSHCS 1/4-20X7/8 CLUTCH, SIDE PLATE C/BORED POLYURETHANE ROD SPRING 5/16 L KEY RATCHET CLUTCH #50 SPKT HUB RATCHET SPKT #50 SPKT 50A34 X 1 MAX BORE CLUTCH, SIDE PLATE TAPPED COLLAR LOCK 7/8 HEX GUARD CHAIN GROUND DRIVE DECAL CAUTION TIRE 40PSI/105 SCREW SET 5/16-18 SKT KP X 3/8 GREASE ZERK 1/4-28 X 45-DEG NUT WELD 5/16-18 ND2724 WASHER LOCK SPRING 5/16 PLT HHCS 5/16-18X3/4 GR5 NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1/2 USS HARD PLT TUBE RND 1 OD X 7/32W X 1.56 IDLER SPOOL #50 38X1.01X1.31 HHCS 1/2-13X2 3/4 GR5 CHAIN ROLLER #50 PLATED RHSNB 3/4-10X2 1/2 GR5 ARM GAUGE WHL RIGHT HHCS 3/4-10X2 1/4 GR5 WASHER LOCK SPRING 3/4 PLT GA WHL SPLIT YOKE WLDMT NARROW SPINDLE GW BRG CUP BRG CONE 1.50ID 13600LA90028 HHCS 3/8-16X1 GR5 WASHER LOCK SPRING 3/8 PLT WASHER FLAT 3/8 USS PLT SPINDLE NUT LOCK WRENCH NUT BRG LOCK TN-07 SPINDLE LOCK PLATE NUT HEX 3/4-10 PLT 04/26/ P

18 Table of Contents Contact Wheel Assembly (continued) Ref Part No C C D D C D D C C C C Part Description HHCS 5/16-18X1 1/2 GR5 FHSCS 3/8-16 X 1 TORX SPKT 50A38 75 BORE 1 1/2X13/32X3/8 SPACER WASHER BOLT WHL 9/16-18X1 1/8 GR5 BAR RND 1 X 5 1/8 TAB LOCKING 6 BLT NARROW DRIVE HUB CASTING TIRE PLY LUG WHEEL 15DIAX6WIDE X 6BLT BKSN VALVE STEM TR415X.625X1 1/4 LG Comments Revision P /26/18

19 Table of Contents Drive Contact Wheel Assembly (continued) This Page Intentionally Left Blank 04/26/ P

20 Table of Contents Transmission Exterior P /26/18

21 Table of Contents Drive Transmission Exterior Ref. Part No. Part Description Comments Revision dwg R C C D D C D C D C C H C D C D D C C C D C C C C C S C D C C C D D C D D Image No. CHAIN ROLLER #40 PLATED NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT CHAIN IDLER BOLT PLATE X 5 TB RND 1 ODX7/32X1.88 HT UNPL IDLER 1 PC 38X1.01X1.062 IDLER ADJUSTMENT HANDLE SPKT 40C23 X 7/8 HEX BORE CHAIN HOLDER DISK NUT HEX FLG TP LK 5/16-18ZNYCR BRG 7/8HEXX05OD SPH TRANSMISSION WELDMENT SPKT 40C25 X 7/8 HEX BORE CHAIN GUARD HHCS 3/8-16X1 GR51 TUBE RND 1 OD X 7/32W X 1.56 CHAIN IDLER BOLT PLATE X 3 1/2 WASHER FLAT 1/2 USS HARD PLT WASHER MACH 1.50 X 1.00 X 18GA SCREW SET 5/16-18 SKT KP X 3/8 COLLAR LOCK 7/8 HEX SPKT 40C30 X 7/8 HEX BORE PIN ROLL 1/4 X 1 1/2 LG PLT NUT HEX 3/4-10 PLT WASHER LOCK SPRING 3/4 PLT U-BOLT 3/4-10 X 7 1/32 X 9 3/4 DJ HALL EFFECT SPEED SENSOR CP WASHER FLAT 1/2 SAE PLT SPEED SENSOR MOUNT BRACKET HHCS 1/2-13X1 1/4 GR5 FLANGETTE 52 3-BOLT PLT RHSNB 5/16-18X1 GR5 SENSOR DISC, 42T 5.3 DIA PLTD 3.5 IDLER ARM TIGHTENER PIN LINCH 3/16 X 1 9/16 LONG HEX SHAFT, 7/8, 105 LONG SHAFT 7/8 HEX X 227 LONG 04/26/ P

22 Table of Contents Transmission Interior P /26/18

23 Table of Contents Drive Transmission Interior Ref. Part No. Part Description Comments Revision dwg D H D D C D C H C D C C D D C C D C D C C C C C C C C C D C C D C C D H C C C C C D D H C D C C Image No. CHAIN RL #40 94 PITCHES TRANSMISSION WELDMENT SHAFT 7/8 HEX X 8.72 W/HOLES CHAIN IDLER BOLT PLATE X 5 RHSNB 1/2-13X4 GR5 PLT IDLER ADJUSTMENT HANDLE IDLER 1 PC 38X1.01X1.062 FINAL RANGE IDLER PIVOT WELDMT RHSNB 1/2-13X5 1/2 GR5 COLLAR LOCK 7/8 HEX SPKT 40C30 X 7/8 HEX BORE SPKT 40C22 X 7/8 HEX BORE SPKT 40A38 X BORE 7/8 HEX SHAFT SPACER X.650 CRPH TAPPING SCREW #6 X 3/8 SPRING RND LEAF 2 ID X.5X20GA SPLIT SPACER 1 ID X 1.25 THICK SPKT 40C36 X 7/8 HEX BORE CHAIN GUIDE DISK X 7 DIA SPKT 40C18 X 7/8 HEX BORE WASHER MACH 1.50 X 1.00 X 18GA RHSNB 5/16-18X1 GR5 FLANGETTE 52 3-BOLT PLT BRG 7/8HEXX05OD SPH NUT HEX FLG TP LK 5/16-18ZNYCR HHCS 3/8-16X1 GR5 NUT HEX 3/8-16 PLT WASHER LOCK SPRING 3/8 PLT SHAFT 7/8 HEX X 227 LONG PEER 7/8 HEX BRG AND MNT NUT FLANGE LOCK 3/8-16 PLT 3.5 IDLER ARM TIGHTENER RHSNB 1/2-13X3 GR5 PLT RHSNB 1/2-13X6 GR5 CHAIN IDLER BOLT PLATE X 3 1/2 3.5 X 7 IDLER PIVOT WELDMT SCREW SET 5/16-18 SKT KP X 3/8 WASHER LOCK SPRING 3/4 PLT SPKT 40C19 X 7/8 HEX BORE SPKT 40C20 X 7/8 HEX BORE SPKT 40C25 X 7/8 HEX BORE CHAIN RL #40 X 104 PITCHES CHAIN RL #40 78 PITCHES 3.5 SHORT IDLER PIVOT WELDMENT WASHER FLAT 1/2 USS HARD PLT HEX SHAFT, 7/8, 105 LONG U-BOLT 3/4-10 X 7 1/32 X 9 3/4 NUT HEX 3/4-10 PLT 04/26/ P

24 Sprocket Storage Table of Contents P /26/18

25 Table of Contents Drive Sprocket Storage Ref. Part No. Part Description Comments Revision dwg C C C C C C C C H C C C S C C D C C C Image No. SPKT 40C19 X 7/8 HEX BORE SPKT 40C24 X 7/8 HEX BORE SPKT 40C25 X 7/8 HEX BORE SPKT 40C26 X 7/8 HEX BORE SPKT 40C27 X 7/8 HEX BORE SPKT 40C28 X 7/8 HEX BORE SPKT 40C17 X 7/8 HEX BORE PIN WIRE RETAINING 1/4 X 1 3/4 SPRKT STORAGE WELD HHCS 1/2-13X1 1/2 GR5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT SPRKT STORAGE ASSY NUT HEX 3/8-16 PLT WASHER LOCK SPRING 3/8 PLT TIMING TOOL HOLDER HHCS 3/8-16X1 GR5 TIMING TOOL, 19 TOOTH PIN LINCH 3/16 X 1 9/16 LONG Includes items /26/ P

26 Meter Table of Contents P /26/18

27 Meter Table of Contents Meter Ref. Part No. Part Description Comments Revision dwg C C H C C D C C D D C C C C C C C C C D C C C C C C C C C C C C D H C D C C C C C C D C C C C Image No. NUT HEX TOP LOCK 5/16-18 PLT WASHER FLAT 5/16 USS PLT AM G2 PM IDLER WA IDLER SPOOL 38X1.01X0.90 BUSHING.63 ID X.75 OD.62 L TUBE, SS IDLER PIVOT NUT HEX 5/16-18 PLT SPRING EXT. 1.0ODX5.OLX.095MW PLATE, SPRING HOOK HOUSING MACH AIRMTRG2 MECH DRV AM BRUSH HOLDER BRUSH, STRIP, LONG, PTFE BRUSH, SEED DROP, PTFE BRUSH, STRIP, SHORT, PTFE HHCS 5/16-18X3/4 GR5 AIR MTR RAIN COVER WASHER WAVE SPRG 0.65ID 0.79OD AIR MTR BRUSH HOLDER SNAP RHSNB 5/16-18X2 GR5 SHAFT 5/8 AIR METER DOUBLE CUT BRG 0.625ID X1.375OD X0.43 SNAP RING EXT 5/8.050 T AIR METER DISK SEAT AIR MTR DISK CLAMP SPRING COMP 1.46ODX1.5X.112W WASHER FENDER 5/16 X 1 1/2 HHCS 5/16-18X5/8 GR5 SCREW HEX SLT X 1 HFS X 1/2 PLT BRUSH, 4 TUFTED PEANUT GUIDE, AIR METER GATE SPRING COMP 0.61ODX0.051WX1.47 AM G2 P6 GATE, FINGER TAB V7 GATE GUIDE SEAL, AIR METER GATE AM G2 P6 GATE V7 SEED CHUTE HALF RH HOPPER SEED CHUTE HALF LH HOPPER SCREW HEX X 1 1/4 THFRMG NUT HEX JAM NYLOCK 5/8-18 PLT SPKT 41B19 X 5/8 BORE W/KYWAY WOODRUFF KEY #606 WASHER FLAT 5/8 14GA KEYHOLE WASHER WAVE SPRG 1.31ID 1.63OD NUT HEX WHIZ 5/16-18 PLT LATCH, FLEXIBLE SNAP WITH SPCR BRUSH, KNOCKOUT 04/26/ P

28 Table of Contents Opener Arms & Mounts P /26/18

29 Table of Contents Openers Opener Arms & Mounts Ref. Part No. Part Description Comments Revision dwg H C C C D D C C C C C D C D D C D D D H C H C C C D C C D C D D C C Image No. 25P FRONT OPENER MOUNT WELDMT NUT HEX 3/8-16 PLT WASHER LOCK SPRING 3/8 PLT WASHER FLAT 3/8 SAE PLT TWIN ROW SPACER BRACKET LOWER TWIN ROW SPACER BRACKET UPPER RHSNB 3/8-16X1 GR5 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT NUT FLANGE LOCK 3/8-16 PLT IDLER SPOOL 1.44OD X.53B X1.5L IDLER SPACER TUBE 1/2OD X 1.56 SPRING EXT OD X.225 W 3 13/32 SPRING STRAP SPRING CAM PLATE 25P SPRING ADJUSTER CAM 25P SPRING ANCHOR PIN 25SER PAR ARMS ADJUSTER NUT 25P ADJUSTER PIVOT PIN 25P REAR OPENER MOUNT WELDMT NUT HEX FLG LOCK 1/2-13 PLT 25 SERIES OPENER SHANK WELDMT AM SEED TUBE DIRT GASKET HHCS 3/8-16X3/4 GR5 U-BOLT 5/8-11 X 7 1/32 X 8 1/2 CHAIN RL # PITCHES HHCS 1/2-13X6 1/2 GR5 HHCS 3/8-16X2 1/2 GR5 25P REAR OPENER INNER PIVOT TB PARALLEL ARM PIVOT BUSHING 25 SRS UPPER PARALLEL ARM 25 SRS LOWER PARALLEL ARM HHCS 3/8-16X1 GR5 PEER 7/8 HEX BRG AND MNT 04/26/ P

30 Opener Body Table of Contents P /26/18

31 Opener Body Table of Contents Openers Ref. Part No. Part Description Comments Revision dwg C C D C D C C C S H C C S S C C C D C D D C D C C C H H H D C C C C D C H D D D C C C C S S C D D D C C C C C Image No. CABLE TIE.19X D 50LB SNAP RING EXT 5/8.050 T 20 SER OPNR CAM PIN RHSNB 5/16-18X3/4 GR5 SCRAPER, DISC RH PIN COTTER 3/32 X 1 LONG PIN CLEVIS 1/4 X 2 1/2 PLT HANDLE CASTING RIGID ADJUSTMENT ASSY 25P MID PW MOUNT SEED FLAP, RUBBER, SEED-LOK SEED FLAP, UHMW, LONG WIDE SEED TUBE W/SENSOR ASM SEED TUBE AM TB,CLIP & SENSOR DJ PLANTER STYLE SEED SENSOR LARGE/WIDE SEED TUBE SEED TUBE AIRMETER 25 SER COVER SCRW SET SQ HD 1/2-13X1 3/4GR5 25P SIDE DEPTH WHL ARM SPINDLE SPINDLE, GA WHL MNT ADJ NUT HEX WHIZ 5/16-18 PLT SCRAPER, DISC LH ELBOW PTC 1/4 X 3/8 PIN ROLL 5/16 X 7/8 PIN ROLL 5/16 X 5/8 PLT 25P SCRAPER SEP WLDMT 3/8 FRT 25P SCRAPER SEP WMT 3/8 WIDE 25P SCRAPER SEP WMT 3/8 WIDE DISK SHIELD SPRING COMP.72 X 1.5 X.072WD WASHER 3/4 X 17/32 X 18 GA PLT PIN COTTER 3/32 X 1 LONG CABLE TIE.19X15 PANDU BT4S-C0 TOP COVER RHSNB 1/2-13X1 1/2 GR5 LONG PW MOUNT 1X12 PW ADJUSTER ARM, GAUGE WHEEL 25P SIDE DEPTH WHEEL ARM GREASE ZERK STRAIGHT 1/4-28 HHCS 1/2-13X3 GR5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT 25P NARROW ELIMINATOR BUSH ASY 25P WIDE ELIMINATOR BUSHNG ASY O-RING SQ 1 1/4ID X1 1/2ODX1/8 25P DEPTH WHL OUTER BUSHING O-RING BUSHING 25P DEPTH WHL ECCENTRIC BUSHNG 25P ECCENTRIC HEX ADJUSTER HFS 1/2-13 X 1 1/2 GR8 NYL PLT WASHER MACH 1.19 X.63 X 18GA WASHER FLAT 1.31ODX.65IDX.188T 5X16 SIDE DEPTH WHEEL ASSY Includes items 2, 3, 8, 26, 27, and 28 Includes items Shown Includes C & C Shown Shown Includes items Used with 2 1/2" Shown and 3" Wide Tires Includes items Used with 4" Wide Tires 04/26/ P

32 Table of Contents Opener Body (continued) Ref Part No C C C S V C C C D C C C C H Part Description 3X16 SIDE DEPTH WHEEL ASSY 4 X 16 GAUGE TIRE ASSY-PLASTIC HSBHCS 5/8-11X3 GR5 4.0 MM 15 DISC W/ 5/8 ASSY BRG AA205DD 4.0 MM 15 DISK (21 DEG BEVEL) HSG RIBB FLG 6BOLT PLT RIVET,BUTTON HEAD 1/4 X 1/2 DD BRG FLANGE DUST COVER HHCS 5/8-11X1 1/2 GR5 NYL WASHER LOCK SPRING 5/8 PLT HHCS 1/2-13X1 1/2 GR5 HHCS 1/2-13X1 GR5 PEANUT DEPTH STOP WMT Comments Includes items Revision P /26/18

33 Table of Contents Openers Opener Body (continued) This Page Intentionally Left Blank 04/26/ P

34 Hopper Mounting Table of Contents P /26/18

35 Table of Contents Openers Hopper Mounting Ref. Part No. Part Description Comments Revision dwg C C C C C C C D C C C C C D C C C C C C H C C C H C C C C D C C D D C C C C Image No. HOPPER LID 1.6 BU HINGED BULB SEAL 1.6 BU HINGED LID HOPPER 1.6 BU RH DOUBLE TORSION SPRING WASHER FLAT 1/4 SAE PLT HHCS 1/4-20X1/2 GR5 LID LATCH CATCH LID SPRING MOUNT NUT HEX FLG TP LK 5/16-18ZNYCR GAS SPRING 25LB 6.3" STROKE NUT HEX FLANGE 1/4-20 PLT HOPPER LATCH HANDLE RHSNB 1/4-20X5/8 PLT SPRING MOUNT HHCS 5/16-18X1 GR5 WASHER FLAT 5/16 USS PLT NUT HEX FLG TL 1/4-20 ZNYCR RHSNB 5/16-18X3/4 GR5 GASKET ORING 1/8 RND X 3.5 ID SEAL INSERT HOPPER LG OVAL BTM RH HOPPER MOUNT WLDMNT HHCS 3/8-16X1 GR5 WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT 25 SERIES OPENER SHANK WELDMT FUNNEL, AIR METER CLEAN OUT HHCS 1/2-13X4 GR5 WASHER FLAT 1/2 SAE PLT WASHER RBR 1 3/8ODX9/16IDX1/2L FERTILIZER TINE SPACER HANDLE GRIP.187 X.750 X 3 LG SPRING EXT.438ODX1.5X.046W BRACKET, CLEANOUT FUNNEL BRACKET, CLEANOUT FUNNEL LATCH NUT FLANGE LOCK 3/8-16 PLT NUT HEX NYLOCK 1/2-13 HFS 3/8-16X1 GR5 SEED TUBE CLEANER BRUSH 04/26/ P

36 Table of Contents 25 Series Keeton Seed Firmer (Option) P /26/18

37 Table of Contents Openers 25 Series Keeton Seed Firmer (Option) Ref. Part No. Part Description Comments Revision dwg BXT C C C C C Image No. KEETON NARROW TAIL BRACKET FOR C REV A&B RHSNB 3/8-16X1 3/4 GR5 NUT HEX 3/8-16 PLT WASHER LOCK SPRING 3/8 PLT NUT HEX WHIZ 5/16-18 PLT HHCS 5/16-18X2 1/2 GR5 04/26/ P

38 Table of Contents Hub Assembly ( C & S) P /26/18

39 Table of Contents Openers Hub Assembly ( C & S) Ref. Part No. Part Description Comments Revision dwg C CR C C C HU C C C HS C C D D C C C S C Image No. HHCS 5/8-11X1 1/2 GR5 MARTIN 3 LIP SEAL (JD AA26234) BEARING CONE L44643 BEARING CUP L44610 RHSNB 7/16-14X1 3/4 GR5 MARTIN HA13270 HUB HOUSING NUT HEX WHIZ 7/16-14 PLT WASHER FLAT 3/4 SAE PLT NUT HEX SLOTTED 3/4-16 MARTIN HUB CAP PIN COTTER 5/32 X 1 1/4 LG RHSNB 1/2-13X1 1/4 GR5 NARROW HUB BOLT SPACER NARROW COULTER HUB BRG 5206KPP IDX44 OD RING FC HOUSING HHCS 5/8-11X1 1/2 GR5 GP25S NARROW HUB ASM ROW CLEANER HUB ASM Includes items Includes items /26/ P

40 Table of Contents Seed Lok 6" Assy. ( K) P /26/18

41 Table of Contents Openers Seed Lok 6" Assy. ( K) Ref. Part No. Part Description Comments Revision dwg C D C H D C C D C D C C A C C C S D C D D Image No. PIN COTTER 5/32 X 1 1/4 LG LEVER, SEED LOK SPRING.540 O.D.X 1 1/4 X.054W LOCK ROD WELD SEED LOK MOUNT RHSNB 5/16-18X3/4 GR5 NUT HEX WHIZ 5/16-18 PLT JD KINZE SEED LOK LOWER MOUNT SNAP RING 1/2 EXTERNAL HEAVY SEED LOK WHEEL ARM SCR HX SKT BUT CP 3/8-16X3/4 WASHER INTERNAL STAR 3/8 PLT. RPBY V SCR PH THD FMG #10X1/2 TP ZP RETAINER W/BONDED SEAL 4BLT 5/8 X 6 SEED LOK WHEEL 6 SEED LOK ASSEMBLY WASHER MACH 1.50 X.510 X 10G SPRING EXT 1 X 4 X.135 WD SEED LOK PIVOT PIN LEVER STOP 04/26/ P

42 Table of Contents 25 Series Side Depth Wheel Scraper Assembly P /26/18

43 Table of Contents Openers 25 Series Side Depth Wheel Scraper Assembly Ref. Part No. Part Description Comments Revision dwg C D D D C C Image No. HHCS 1/2-13X3 1/4 GR5 5" GAUGE WHEEL SCRAPER 4" GAUGE WHEEL SCRAPER 3" GAUGE WHEEL SCRAPER WASHER FLAT 1/2 SAE PLT NUT HEX 1/2-13 PLT Shown 04/26/ P

44 Table of Contents Press Wheel Assembly 1X12 & 1.25X P /26/18

45 Table of Contents Press Wheels Press Wheel Assembly 1X12 & 1.25X13.5 Ref. Part No. Part Description Comments Revision dwg H H C C C D C C H D C C C C C C C D C C H C C H C Image No. 25P MID PW MOUNT LONG PW MOUNT PARALLEL ARM PIVOT BUSHING PIN CLEVIS 5/8 X 3 1/4 PIN COTTER 1/8 X 1 SPRING ALIGNMENT BUSHING SPRING 1.8 OC X 11 LG NUT HEX FLG LOCK 1/2-13 PLT 25 SER 12 DEG STAG PW ARM WLD PRESS WHEEL PVT MNT TUBE HHCS 1/2-13X4 1/2 GR5 PRESS WHEEL SPRING ADJ HANDLE WASHER FLAT 1/2 HARD ASTMF436 PIN CLEVIS 7/16 X 1 1/ X 13.5 WEDGE HD PW ASSY HHCS 1/2-13X1 3/4 GR5 1 X 12 PRESS WHL ASSY-5203BRG 1/4 PW SPACER 5/8 DIA WASHER LOCK SPRING 5/8 PLT HHCS 5/8-11X3 1/4 GR5 LH DRIBBLER TUBE WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT RH DRIBBLER TUBE RHSNB 5/16-18X3/4 GR5 04/26/ P

46 Table of Contents 12-12D Cast Press Wheels P /26/18

47 Table of Contents Press Wheels 12-12D Cast Press Wheels Ref. Part No. Part Description Comments Revision dwg H C C C D S C D C C H C C C C C D D C C H C C C D H Image No. 25 SER 12 DEG ADJ PW ARM WLDMT HHCS 5/8-11X3 1/4 GR5 WASHER LOCK SPRING 5/8 PLT MAC-LOK 3/8-16 SUPER FLANGE CAST PRESS WHEEL COVER DISK CAST WEDGE PW ASY 40 DEG HHCS 3/8-16X1 1/4 GR5 1/4 PW SPACER 5/8 DIA HHCS 1/2-13X1 3/4 GR5 WASHER FLAT 1/2 HARD ASTMF SER 12 DEG STAG PW ARM WLD NUT HEX FLG LOCK 1/2-13 PLT PIN COTTER 1/8 X 1 PIN CLEVIS 7/16 X 1 1/2 PRESS WHEEL SPRING ADJ HANDLE HHCS 1/2-13X4 1/2 GR5 PRESS WHEEL PVT MNT TUBE SPRING ALIGNMENT BUSHING PIN CLEVIS 5/8 X 3 1/4 PARALLEL ARM PIVOT BUSHING 25P MID PW MOUNT SPRING 1.8 OC X 11 LG SNAP RING INT 40 MM BRG.63ID PRESS WHL ASY CAST WEDGE PW MACHINED 40 DEG LONG PW MOUNT (ONLY) used with Staggered Press Wheel Weldment (ONLY) used with Staggered Press Wheel Weldment Includes items: (ONLY) used with Staggered Press Wheel Weldment 04/26/ P

48 Table of Contents Press Wheel Assembly With Spider Wheels P /26/18

49 Table of Contents Press Wheels Press Wheel Assembly With Spider Wheels Ref. Part No. Part Description Comments Revision dwg C C D D C C C C C D H C C S S C C C H C C C C C D D C C C H H H Image No. HHCS 3/8-16X1 1/4 GR5 WASHER LOCK SPRING 3/8 PLT DRAG CHAIN BACKUP PLATE PLANTER DRAG CHAIN MOUNT HHCS 7/16-14X1 1/2 GR5 TWIST LINK DRAG CHAIN 16 PITCH NUT HEX FLANGE LOC 7/16-14 PLT HHCS 5/8-11X3 1/4 GR5 WASHER LOCK SPRING 5/8 PLT 1/4 PW SPACER 5/8 DIA LH 45 DEG TOOTH CLOSING WHEEL BRG.63ID PRESS WHL ASY SNAP RING INT 40 MM LH 45 DEG TOOTH WHEEL ASM RH 45 DEG TOOTH WHEEL ASM WASHER FLAT 5/8 SAE PLT HHCS 1/2-13X1 3/4 GR5 WASHER FLAT 1/2 HARD ASTMF SER 12 DEG STAG PW ARM WLD NUT HEX FLG LOCK 1/2-13 PLT PIN COTTER 1/8 X 1 PIN CLEVIS 7/16 X 1 1/2 PRESS WHEEL SPRING ADJ HANDLE HHCS 1/2-13X4 1/2 GR5 PRESS WHEEL PVT MNT TUBE SPRING ALIGNMENT BUSHING PIN CLEVIS 5/8 X 3 1/4 PARALLEL ARM PIVOT BUSHING SPRING 1.8 OC X 11 LG 25P MID PW MOUNT LONG PW MOUNT RH 45 DEG TOOTH CLOSING WHEEL Left Hand, Includes items: Right Hand, Includes items: 12, 13 & 31 04/26/ P

50 Table of Contents Closing Wheel Drop mount P /26/18

51 Table of Contents Press Wheels Closing Wheel Drop mount Ref. Part No. Part Description Comments Revision dwg D D D C C C H C C Image No. RH CLOSING WHEEL DROP PLATE LH CLOSING WHEEL DROP PLATE PLATE 1X10 OFFSET TO 25P HHCS 5/8-11X1 1/2 GR5 NUT HEX 5/8-11 PLT WASHER LOCK SPRING 5/8 PLT SPACER WELDMENT WASHER LOCK SPRING 3/8 PLT HHCS 3/8-16X1 1/2 GR5 04/26/ P

52 Table of Contents Press Wheel Breakdown P /26/18

53 Table of Contents Press Wheels Press Wheel Breakdown Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C Image No X 13.5 WEDGE HD PW ASSY HHCS 1/4-20X1 GR5 1 X 12 PRESS WHEEL RIM HALF BRG.63ID PRESS WHL ASY 1.25 X 13.5 PRESS WHEEL TIRE NUT HEX LOCK 1/4-20 FLG 1 X 12 PRESS WHL ASSY-5203BRG TIRE RUBBER 1 X 12 1 X 12 HD PRESS WHEEL RIM HALF RPBY C (S/N-) 04/26/ P

54 Fan Hydraulics Table of Contents P /26/18

55 Fan Hydraulics Table of Contents Hydraulics Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C C C Image No. CP 3/4FORB MALE QD RELIEF CP 3/4FORB MALE QD POPPET TYPE FASSE DUST CAP 1/2" HH1/2R /4FJIC 3/4MORB EL 3/4FJIC 3/4MJIC TE 3/4MORB 3/4MJIC 3/4MJIC AD 7/8MORB 3/4FJIC HYD MOTOR 7/8ORBF TE 3/4MJIC HH1/2R /4FJIC AD 3/4MORB 3/4MJIC VALVE LINE CHECK 04/26/ P

56 Table of Contents Hydraulic Hose Grips P /26/18

57 Table of Contents Hydraulics Hydraulic Hose Grips Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C C C C Image No. HG HANDLE - BLACK EXT HG HANDLE - RED EXT HG HANDLE - GREEN EXT HG HANDLE - YELLOW EXT HG HANDLE - GRAY EXT HG HANDLE - BLUE EXT HG HANDLE - BLACK RET HG HANDLE - RED RET HG HANDLE - GREEN RET HG HANDLE - YELLOW RET HG HANDLE - GRAY RET HG HANDLE - BLUE RET AD 3/4MORB 3/4FORB (HG) Used on frame lift cylinders. Used on hydraulic level Used on wing fold cylinders Used on Hydraulic Drive. Used on fold cylinders. Used on cast roller depth control. Used on frame lift cylinders. Used on hydraulic level. Used on wing fold cylinders. Used on Hydraulic Drive. Used on fold cylinders. Used on cast roller depth control 04/26/ P

58 Monitor Table of Contents P /26/18

59 Monitor Table of Contents Monitor Ref. Part No. Part Description Comments Revision dwg C C C S S C Image No. CONSOLE ASSY, DJ PM 300 CABLE TIE.19X DIA 50LB DJ 6 ROW WIDE TWIN CTR HARNESS HARNESS, DJ, EXT, 15.5 RADAR DJ FAN RPM SENSOR THRD HALL DJ HALL EFFECT SPEED SENSOR CP CABLE EXT 25' RADAR GRD SPEED 04/26/ P

60 Table of Contents Liquid Fertilizer Mounting P /26/18

61 Table of Contents Liquid Fertilizer Liquid Fertilizer Mounting Ref. Part No. Part Description Comments Revision dwg C D C C C D C C C R C C R C C C C C C C D C C C C D C C D D C Image No. GAUGE 100 PSI 4IN STAINLESS ST GAUGE PROTECTOR BOTTOM AD 1/4MNPT SCH 40 X 5 304SS EL 1MNPT X 3/4HB POLYPROP NUT HEX WHIZ 3/8-16 PLT LIQUID MANIFOLD 7X7 MNT PLATE NUT WING 3/8-16 PLT U-BOLT 3/8-16 X 7 1/32 X 7 7/8 RHSNB 3/8-16X1 GR5 TUBE NYLON 1/4OD X 062WL ELBOW PTC 1/4 X 3/8 AD 3/8 TUBE X 3/8 TUBE PTC HOSE 3/4 ID 200PSI EPDM AD 1MNPT X 3/4MNPT POLYPROP TEE 3/4FNPT X3/4HB X3/4HB POLY VALVE - 1FNPT BALL POLYPROP AD 1MNPT X 1 FCL POLYPROP AD 1HB X 1MCL POLYPROP CLAMP WRM DRV #16 SS ( ) DECAL NOTICE GAUGE PROTECTOR BRACKET 3/4 VALVE MNT W/SLOT NUT HEX 1/4-20 PLT HHCS 1/4-20X3 GR5 NUT HEX WHIZ 1/ SS PL 1/4MNPT POLYPROP 8-COLUMN METER BACK PLT HHCS 1/4-20 X 2 SS END CAP - POLYPROPYLENE JOHN BLUE VISAGAUGE II ASY GAUGE PROTECTOR TOP SRHMS 5-40X5/8 SS 04/26/ P

62 Table of Contents VisaGauge Valve Assembly ( D) P /26/18

63 Table of Contents Liquid Fertilizer VisaGauge Valve Assembly ( D) Ref. Part No. Part Description Comments Revision dwg36720 Image No. SMPT-0053_ASM 3/8 TUBE PUSH CONNECT EL AD SMPT-0007_2 #212 VITON O-RING SMPT-0005 UPPER BALL SCREEN SMPT-0020 BALL-316 STAINLESS STEEL SMPT-0019 BALL-BLUE GLASS SMPT-0018 BALL-BLUE PLASTIC-DELRIN SMPT-0017 BALL-BLACK PLASTIC-POLYPROPYLE SMPT-0016 BALL-GREEN-PLASTIC-POLYPROPYLE SMPT-0006_10 RETAINER CLIP SMPT-0001_89 SPRAY TYPE COLUMN-PVC 04/26/ P

64 Decal Placement Table of Contents P /26/18

65 Table of Contents Decals Decal Placement Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C C D C C C C C C C C C Image No. DECAL CAUTION TIRES NOT A STEP DECAL CAUTION TIRE 40PSI/105 DECAL REFLECTOR AMBER 2X9 SEED TUBE CLEANER BRUSH DECAL REFLECTOR RED 2X9 DECAL REFLECTOR DAYTIME 2X9 DECAL SLOW MOVING-GALV. BACKED DECAL YIELD-PRO SMALL DECAL CAUTION OPERATIONAL MACH DECAL WARNING MOVING CHAIN U-BOLT 3/8-16 X 7 1/32 X 7 7/8 YP825 AMBER DECAL BRKT 10GA WASHER FLAT 3/8 SAE PLT WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT DECAL BEE FRIENDLY YELLO & WHT DECAL BEE FRIENDLY BLK & YELLO DECAL YP625A DECAL WARNING HIGH PRESSUR SML DECAL WARNING 20 MPH TRANS SML EZEE-GLIDE PLUS LUBRICANT-5GAL 04/26/ P

66 Table of Contents The is a numeric index of all part numbers included in this manual. The index shows what page(s) the part is used on. Part Number Page Part Number Page Part Number Page Part Number Page D D D...17, D D A BXT D D D D D D V D D D D D D D D D D D D D D D...45, 47, D...45, 47, D D H...31, 45, 47, H...31, 45, 47, S H H...45, 47, S H H D D D D D D S H...29, S S H H H D...21, D H D S H D D D D...17, 21, D D D H H H H H H D...21, D...21, D D D D...21, D D D D D D D D D D D...17, D...21, D D S D S H D D D D D D D D H...21, K H H S H D D D H D S D D D D D D D D D D D D D D...9, H H H S S H D...45, 47, D D D D D D D D D D H...7, D D D D D D D D D H S H H D D D D D...21, S1...21, S1...11, D D C...17, C C C C...47, C C C C...13, C...27, C C C C C C C C...17, 21, C C C C C C C C C C C...11, C...17, C C C...29, C... 7, 11, 13, 17, 21, 23, 25, 29, C C C C C C C...39, C C...11, 47, C...45, 47, C...17, 25, C...31, 35, 41, C C C C C C C...45, 47, C C C C C C C C C C C...21, C C C C C C...45, 47, C C C C C C C C C...11, C...27, C... 9, 11, 13, 15, 23, 25, 29, 35, 37, C...17, 21, 25, 31, C...7, 29, C...17, 21, C...27, 31, 37, C C C...13, C C C C C...17, 29, 45, 47, C C...21, 23, C P /26/18

67 Table of Contents (continued) Part Number Page Part Number Page Part Number Page Part Number Page C C C...23, 29, C C...11, C C C C C C C C...11, C...17, C...11, 27, C C...11, 29, C... 9, 11, 13, 15, 17, 23, 25, 29, 35, 37, 49, 51, C...17, 21, 25, C...21, 35, C C... 7, 29, 32, 45, 47, 49, C...17, 21, C C C...21, C C...45, 47, C C...17, 21, C C C C C C C C...39, C C C C C...21, C C C C...45, 47, C...45, 47, C...45, 47, C...7, C...9, 11, 15, 61, C...21, C C C C C C C C C C...45, 47, C C C C C...23, C C C...21, 23, C C C C...21, C C C C C C C...11, C...11, C...11, C...11, C C...11, C C C...11, C C C C C C C C C C C C C C C...45, 47, C C C C...45, C C C C C C...45, C C C C C C C C C C C...29, 45, 47, C C C C C...21, C C C C C C C C C C C C C C C C C C...17, C C C C C C C...21, C C...47, 49, C...21, C C C C...23, C C C C C C C C...9, C...31, C C C C C C C C C C C C C C C C C C C C C C C C C C C C C...11, C C C C C C C C C C C C C C C C...17, C C C C C C C...9, C C C...35, C C C C C R R R R R R...7 CR dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg HS HU SMPT-0001_ SMPT SMPT-0006_ SMPT-0007_ SMPT SMPT SMPT SMPT SMPT SMPT-0053_ASM /26/ P

68 Great Plains Mfg., Inc E. North Street Salina, Kansas USA