Parts Manual. 40-Foot 2-Section Planter PL5800. Copyright 2017 Printed 11/06/18

Transcription

1 Table of Contents Part Number Index Parts Manual PL Foot 2-Section Planter Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! Cover illustration may show optional equipment not supplied with standard unit. Copyright 2017 Printed 11/06/ p

2 Table of Contents Table of Contents Part Number Index Section 1: Introduction...5 Using This Manual...5 Manual Replacement Information...5 Manual Revisions...5 Touch-up Paint...5 Hardware Legend...6 Replacement Hardware...6 Serial Numbers...6 Part Number Service Coding...6 Frame...7 Tongue to Frame...8 Center Frame To Toungue...10 Hydraulic Hitch...12 Wings to Mainframe...14 Walkboard and Ladder...18 Hopper Box to Frame BU Bulk Hopper...22 Lights...24 Fan to Frame...26 Air Box...28 Seed Delivery...30 Air Hose Tower Mount...32 Air Pressure Assembly...34 Battery and Alternator Mounting...36 Transport...39 Gauge Wheels...40 Transport Wheels...42 Drive...44 Contact Drive Center Section...44 Contact Drive Left Section...46 Contact Drive Right Section...48 Hydraulic Drive...50 Tru-Count Clutch Assembly...52 Meter...55 Air Meter...56 I.R.C. Meter...58 Air Meter Timing Tool with Spring and Wheel Wrench...60 Opener...62 Opener Arms and Mounts...62 Opener Body...64 Side Depth Wheel Assembly Series Keeton Seed Firmer (Option)...70 Seed Lok 6" Assy. ( K)...72 Terra-Tine 15" Wheel...74 Terra-Tine 16" Wheel...76 Double Terra-Tine...78 Single Arm RC Assembly...80 Rigid 13" Row Cleaner...82 Row Cleaner Extension Mount...84 Row Cleaner Unit Mount Assembly...86 Row Pro Series Side Depth Wheel Scraper Assembly...92 Unit Mount Coulter...94 Hub Assembly ( C & S)...96 Press Wheels...98 Press Wheel 12-12, 1.25 X Press Wheel Assembly with Spider Wheels Press Wheel Breakdown Closing Wheel Drop mount Hydraulics Fold Hydraulics Lift and Marker Hydraulics Fan Hydraulics Hydraulic Hose Grips Hydraulic Cylinder ( C 4.75x20x1.75 Rod) Hydraulic Cylinder ( C 4.5 x x 1.5 Rod) Hydraulic Cylinder ( C 5.0 x 10 x 2.0 Rod) Hydraulic Cylinder ( C) Hydraulic Cylinder C (3 x 24 x 1.5 Rod) Hitch Hydraulics Decals Decals Monitor Monitor Individual Rate Control Monitor System Marker Marker Marker Disk And Hub ( S) Fertilizer Fertilizer Tanks and Mounts Fertilizer Plumbing Fertlizer Contact Wheel Breakdown /2" Ball Valve Assembly ( C) John-Blue Pump ( C) Cam Lock Ball Valve ( C) Visagauge Mounting VisaGauge Valve Assembly ( D) Hydraulic Drive for Liquid Fertilizer Banjo Strainer ( C) Hydraulic Connections Hydraulic Drive Mounting Plumbing for Hydraulic Drive Option Part Number Index Copyright 2017 All rights reserved Printed 11/06/18 Great Plains Manufacturing, Inc. provides this publication as is without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. Great Plains Manufacturing, Incorporated Trademarks The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains All other brands and product names are trademarks or registered trademarks of their respective holders. Printed in the United States of America p /06/18

3 Table of Contents Part Number Index Alphabetized Table of Contents Selected Models 1 1 1/2" Ball Valve Assembly ( C) BU Bulk Hopper Series Keeton Seed Firmer (Option) Series Side Depth Wheel Scraper Assembly...92 A Air Box...28 Air Hose Tower Mount...32 Air Meter...56 Air Meter Timing Tool with Spring and Wheel Wrench...60 Air Pressure Assembly...34 B Banjo Strainer ( C) Battery and Alternator Mounting...36 C Cam Lock Ball Valve ( C) Center Frame To Toungue...10 Closing Wheel Drop mount Contact Drive Center Section...44 Contact Drive Left Section...46 Contact Drive Right Section...48 D Decals Double Terra-Tine...78 F Fan Hydraulics Fan to Frame...26 Fertilizer Plumbing Fertilizer Tanks and Mounts Fertlizer Contact Wheel Breakdown Fold Hydraulics G Gauge Wheels...40 H Hitch Hydraulics Hopper Box to Frame...20 Hub Assembly ( C & S)...96 Hydraulic Connections Hydraulic Cylinder ( C 4.75x20x1.75 Rod) Hydraulic Cylinder ( C 4.5 x x 1.5 Rod).116 Hydraulic Cylinder ( C 5.0 x 10 x 2.0 Rod) Hydraulic Cylinder ( C) Hydraulic Cylinder C (3 x 24 x 1.5 Rod) Hydraulic Drive...50 Hydraulic Drive Mounting Hydraulic Hitch...12 Hydraulic Hose Grips I I.R.C. Meter...58 Individual Rate Control Monitor System J John-Blue Pump ( C) L Lift and Marker Hydraulics Lights...24 M Marker Marker Disk And Hub ( S) Monitor O Opener Arms and Mounts...62 Opener Body...64 P Plumbing for Hydraulic Drive Option Press Wheel 12-12, 1.25 X Press Wheel Assembly with Spider Wheels Press Wheel Breakdown R Rigid 13" Row Cleaner...82 Row Cleaner Extension Mount...84 Row Cleaner Unit Mount Assembly...86 Row Pro...88 S Seed Delivery...30 Seed Lok 6" Assy. ( K)...72 Side Depth Wheel Assembly...68 Single Arm RC Assembly...80 T Terra-Tine 15" Wheel...74 Terra-Tine 16" Wheel...76 Tongue to Frame...8 Transport Wheels...42 Tru-Count Clutch Assembly...52 U Unit Mount Coulter...94 V Visagauge Mounting VisaGauge Valve Assembly ( D) W Walkboard and Ladder /06/ p

4 Table of Contents Part Number Index Alphabetized Table of Contents (continued) Wings to Mainframe p /06/18

5 Table of Contents Part Number Index 11/06/ p

6 Table of Contents Part Number Index p /06/18

7 This Page Intentionally Left Blank 11/06/ p

8 Tongue to Frame Table of Contents Part Number Index p /06/18

9 Table of Contents Part Number Index Frame Tongue to Frame Ref. Part No. Part Description Comments Revision dwg H C C D C C C C H C D D C D C C D D C C D C C C Image No. YP16-2 PARKING STAND PIN HTCH.75X4.25 USBL W/PIN PIN HTCH 1.44X8.38 USBL 20P CAT3 HITCH PIN BUSHING WASHER FLAT 1 1/2 SAE PLT PIN COTTER 1/4 X 2 1/2 PLT GREASE ZERK STRAIGHT 1/4-28 BUSHING 2 1/4 OD X 2 ID X 2 LG YP 2PT HITCH WLDMNT HHCS 1-8X1 3/4 GR5 NYL WASHER - SAFETY CHAIN SA HITCH PIVOT SHAFT WASHER MACH 3ODX2IDX.1345 WASHER HARD 3 X 2.06 X 10GA PIN COTTER 1/8 X 1 1/4 PLT PIN CLVS.63X4.27 USBL YP HITCH SWIVEL HITCH VERTICAL PIVOT SHAFT PIN COTTER 1/8 X 1 1/2 PIN CLVS.63X3.27 USBL YP 2PT HITCH MOUNT HHCS 1 1/4-7X9 1/2 GR5 SPTHD WASHER LOCK 1 1/4 SPRING PLT NUT HEX 1 1/4-7 PLT 11/06/ p

10 Table of Contents Center Frame To Toungue Part Number Index p /06/18

11 Table of Contents Part Number Index Frame Center Frame To Toungue Ref. Part No. Part Description Comments Revision dwg H C D C C H C H C C C H C C D D C C C H C H C H C C D C C C D C C D C D C C C D C C Image No. YP16-2 TONGUE REAR SECTION PIVOT THRUST WASHER PLANTER CENTER LIFT PIN PIN COTTER 1/8 X 1 1/4 PLT PIN CLVS.63X3.27 USBL YP16 LIFT ASSIST LINK ADAPT 90 SWIVEL 1/4-28M X 1/4 CYL PIN NR 1.25X3.63USBX3.13CH BUSHING SPINDLE 1 1/2X1 1/4X1 WASHER FLAT 1 1/4 SAE PLT PIN COTTER 7/32 X 2 SERIES II ARCH FRAME PIN ROLL 1/4X1 3/4 PIN CLVS HDLS.75X4.41 USBL 40P GW SWIVEL PIN BOX HINGE PIVOT WASHER NUT HEX SLOTTED 1 1/4-7 PIN COTTER 5/16 X 2 1/2 GREASE ADAPT 1/4-28M X 1/4 TB YP12/16 LIFT BASE WLDMNT CYL REP 5X10X2.0 ROD (TIE) CYL PIN NR 1.25X3.09X2.63 W/GR PIN COTTER 1/4 X 2 1/2 PLT YP12/16 ROCKER LIFT LINK NUT HEX 5/8-11 PLT WASHER LOCK SPRING 5/8 PLT CENTER LIFT PIN YP OD HHCS 5/8-11X7 GR5 HHCS 3/4-10X2 1/2 GR5 NUT HEX FLG TP LK 5/16-18ZNYCR 6IN HOSE CLAMP WASHER LOCK SPRING 5/16 PLT HHCS 5/16-18X1/2 GR5 6IN HOSE CLAMP HALF RHSNB 5/16-18X3/4 GR5 2SNT AXLE BOTTOM HALF BAND GREASE ZERK 1/4-28 X 90-DEG WASHER FLAT 3/4 SAE PLT NUT LOCK 3/4-10 PLT GREASE BANK MNT PLATE AD PUSH 1/4 TUBE 1/8 FNPT GREASE ZERK STRAIGHT 1/ /06/ p

12 Hydraulic Hitch Table of Contents Part Number Index p /06/18

13 Hydraulic Hitch Table of Contents Part Number Index Frame Ref. Part No. Part Description Comments Revision dwg H C C D C C C D C C D C C C C D H H H H C C D C C C C C C C C C C C D C C C C D C H Image No. PARKING STAND WELDMT PIN ROLL 1/8 X 1 1/4 LG. PLT WASHER FLAT 3/4 SAE PLT PARKING SUPPORT PIN PIN ROLL 1/4X1 3/4 HHCS 1 1/4-7X10 GR5 SPTHD HHCS 1 1/4-7X9 1/2 GR5 SPTHD SAFETY CHAIN WASHER SAFETY CHAIN LB NUT HEX 9/16-18 PLT CASTING LARGE HITCH STRAP SPRING HOSE LOOP HEAVY HHCS 9/16-12X2 3/4 GR5 ZNYCR WASHER LOCK 1 1/4 SPRING PLT NUT HEX 1 1/4-7 PLT PIN 1 1/4 X 7.13 USBL HITCH CASTING MOUNT WLDMNT HITCH LOWER ARM WELDMNT HITCH UPPER ARM WELDMNT STROKE GAUGE POINTER 3000PSI WASHER FLAT 1 SAE PIN COTTER 7/32 X 2 HITCH INDICATOR YP TONGUE DECAL STROKE GAUGE EL 9/16MJIC 9/16MORB CYL 3.5X16X1.75 ROD(TIE)NOPINS PIN CLVS 1.0X3.11 USBL GR5 AD 3/4FORB 3/4FORB AD 3/4MORB 3/4FJIC EL 7/8MORB 3/4MJIC YP HYD HITCH VALVE EL 3/4MORB 9/16MJIC NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT HYD HITCH COMP MOUNT BRACKET HHCS 1/2-13X1 1/2 GR5 WASHER LOCK SPRING 5/16 PLT HHCS 5/16-24X1 GR5 HHCS 1 1/4-7X3 1/2 SPTHD GR5 PIN 1.75X9.25 USBL 1144 PIN ROLL 3/8 X 2 1/2 PLT CYLINDER LUG END MOUNT WELDMNT 11/06/ p

14 Table of Contents Wings to Mainframe Part Number Index p /06/18

15 Table of Contents Part Number Index Frame Wings to Mainframe Ref. Part No. Part Description Comments Revision dwg H C C D C H C C D D H C C C C C C C H C H C H C C D C C C D D D D C H C C C H H D C H C C C C C C C C C C H Image No. PULLBAR WELDMENT 16 ROW PIN CLVS 1.0X2.875 USBL HHCS 1/4-20X2 1/4 GR5 SLEEVE, SPRING LINK MOUNT NUT LOCK 1/4-20 PLT 16R PB TONGUE FRONT SECT WLDMT CYL 1.5X2.5X.75 ROD W/CLEVIS PIN COTTER 1/4 X 2 1/2 PLT DRAFT HOOK PIN 1.5 X 9.19 HYD. HOSE HOLDER YP16-2 ROLLER PIN WLDMT HHCS 1/2-13X1 1/2 GR5 HHCS 3/8-16X1 1/4 GR5 WASHER FLAT 3/8 SAE PLT NUT HEX WHIZ 3/8-16 PLT PIN COTTER 1/8 X 1 1/4 PLT WASHER FLAT 5/8 SAE PLT PIN CLVS.63X3.27 USBL TELESCOPING HITCH SAFETY LATCH GREASE ZERK STRAIGHT 1/4-28 TONGUE ROLLER BUSHING WELDMENT MAGNEHELIC PRES GAGE-0-6 INH2O YP16-2 TONGUE REAR SECTION CYL REP 4.75X20.0X1.75 (RET) HHCS 1/4-20X1/2 GR5 YP16-2 MODULE MNT BOX COVER HHCS 5/16-18X1 1/2 GR5 WASHER LOCK SPRING 5/16 PLT WIRING AND TUBE CLIP HYD HOSE CLAMP BRACKET WASHER 3.5ODX1.03ID.38THK. TOOLBAR HORZ PIVOT PIN WASHER HARD 4 X 2.56 X.25 NUT LOCK 3/4-10 PLT OPEN CENTERED HINGE HOSE GUIDE WASHER FLAT 3/4 SAE PLT HHCS 3/4-10X5 GR5 HHCS 1-8X1 3/4 GR5 NYL YP16II TOOLBAR LH FRAME 1 YP16II RIGHT TOOLBAR TRANSPORT HOOK PVT SHAFT 1.25 PIN ROLL 3/8 X 2 1/2 PLT TRANSPORT SUPPORT HOOK WLDMT VINYL CAP.490 ID X 1 LG PIN ROLL 1/4X1 3/4 PIN CLVS HDLS.75X4.41 USBL HHCS 5/16-18X1/2 GR5 STAUFF COVER PLATE GROUP 2D STAUFF STACKING BOLT - 2D STAUFF CLAMP BODY 2D 0.63 HOLE STAUFF STACKING BOLT - 3D STAUFF LOCK PLATE - 2-3D STAUFF CLAMP BODY 3D 0.79HOLE YP16II LEFT WING FRAME 1 LH, used with 30" Twin Row and 70cm Twin Row RH, used with 30" Twin Row and 70cm Twin Row LH, used with 15", 20", 30", 36", 35cm, 70cm, 36" Twin Row. 11/06/ p

16 Table of Contents Wings to Mainframe (continued) Part Number Index Ref Part No H H H H H C H C C C H D D C C Part Description YP16II RIGHT WING FRAME 1 YP16-2 LEFT WING FRAME 2 YP16-2 RIGHT WING FRAME 2 YP16-2 TOOLBAR LH FRAME 2 YP16-2 RIGHT TOOLBAR 2 NUT HEX 1 1/2-6 PLT 16 ROW PULLBAR ADJUSTER PIN ROLL 5/32 X 1 PIN CLVS 1.0X4.5 USBL WASHER FLAT 1 SAE HOSE SUPPORT WELDMENT HARNESS TRAY LID YP16II YP16-2 HARNESS TRAY LID 2 PIN, HAIR COTTER 3/16 WIRE DIA SPRING COMP 1.46OD.148WX4.0LG Comments Revision RH, used with 15", 20", 30", 36", 35cm, 70cm, 36" Twin Row. LH, used with 30cm, 70cm, Twin Row 70cm, and Twin Row 30". RH, used with 30cm, 70cm, Twin Row 70cm, and Twin Row 30". LH, used with Twin Row 70cm and Twin Row 30" RH, used with Twin Row 70cm and Twin Row 30" Used with 15", 20", 30", 36", 35cm, 70cm, 36" Twin Row. Used with 30" Twin Row and 70cm Twin Row p /06/18

17 Table of Contents Part Number Index Frame Wings to Mainframe (continued) This Page Intentionally Left Blank 11/06/ p

18 Table of Contents Walkboard and Ladder Part Number Index p /06/18

19 Table of Contents Part Number Index Frame Walkboard and Ladder Ref. Part No. Part Description Comments Revision dwg H C C C H C C D C C C C C C C H C C C C S H C C C C C C D C H C H H C D D C H C C D C C C C C C Image No. YP16 S2 150 BU WALKBOARD SUB HHCS 3/8-16X2 GR5 NUT LOCK 3/8-16 PLT HHCS 3/8-16X1 GR5 WRENCH HOLDER WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT SPRING AND WHEEL WRENCH PIN, HAIR COTTER 3/16 WIRE DIA HHCS 1/2-13X5 1/2 GR5 WASHER FLAT 1/2 SAE PLT WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT PIN LINCH 3/16 X 1 9/16 LONG TIMING TOOL, 19 TOOTH TIMING TOOL HOLDER.375 WIRING AND TUBE CLIP WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT FUNNEL, AIR METER CLEAN OUT CLEANOUT FUNNEL & STORAGE BKT 4 STEP LADDER WELDMENT HHCS 1/2-13X1 3/4 GR5 FTHD HHCS 1/2-13X1 1/2 GR5 YP LADDER FLEX STEP EXT WASHER FLAT 1/2 USS PLT HHCS 3/8-16X1 1/2 GR5 WASHER FLAT 3/8 USS PLT GREEN STEP 45CM X 15CM NUT LOCK 1/2-13 PLT TOP FRONT YP16II HANDRAIL TUBE CAP 1 1/4 ID TB X 3 LG HOOP HANDRAIL WELDMENT YP16II HANDRAIL WELDMENT HHCS 3/8-16X2 1/2 GR5 WALKBOARD LADDER SPACER TUBE WALKBOARD LADDER PIVOT BUSHING NUT HEX FLANGE 3/8-16 PLT UPPER RAIL WLDMNT SCREW PAN HD 1/4-20 X 3/4 DECAL SLOW MOVING-GALV. BACKED 6 BOLT LOCKOUT PLUNGER SPRING COMP 1/2 OD X 1 LG PIN ROLL 3/16 X 2 1/2 LG. PTL. MANUAL PAK 2 1/4 THK MINI END WHEEL PRESS WHEEL HHCS 1/4-20X1 GR5 RHSNB 1/4-20X1 GR5 11/06/ p

20 Table of Contents Hopper Box to Frame Part Number Index p /06/18

21 Table of Contents Part Number Index Frame Hopper Box to Frame Ref. Part No. Part Description Comments Revision dwg D C C H C D C H C D C D C C C C C H C C C C D C C C C C C H C H H C C C H C D C C C C C H C D D D C Image No. ADC2350 BIN LID SEAL HHCS 1/4-20X1 GR5 WASHER FLAT 1/4 HARD ASTMF436 STRAINER BASKET WELDMENT FLNG BUSHING 1 1/8 X 1 X 3/4 LID SWIVEL INNER PIVOT TUBE RHSNB 3/8-16X1 1/2 GR5 LID FLANGE WELDMENT WASHER FLAT 3/4 SAE PLT STRAINER BASKET BOTTOM ANGLE NUT HEX 3/4-10 PLT NYLOCK 82BU SEED HOPPER TRIMMED WASHER FLAT 3/8 NEOPRENE PLT NUT FLANGE LOCK 3/8-16 PLT NUT HEX NYLOCK 5/16-18 PLT WASHER FLAT 5/16 USS PLT U-BOLT 5/16-18X1 1/2X2 1/2 RND SEED HOPPER LADDER HHCS 3/8-16X1 1/2 GR5 WASHER LOCK SPRING 3/8 PLT HHCS 3/4-10X8 GR5 PLT NUT HEX 5/8-11 PLT TANK SIDE WALKBOARD PLATE WASHER FLAT 5/8 SAE PLT HHCS 5/8-11X2 GR5 FTHD RD BUMP STOP 2 X 1 X 1/2-13 WASHER FLAT 1/2 SAE PLT WASHER LOCK SPRING 1/2 PLT HHCS 1/2-13X1 1/4 GR5 ROUND BIN LID WELDMENT HHCS 1/2-13X2 1/2 GR5 AIR DRILL BIN LID HANDLE WLMNT AIR DRILL BIN LID HOOK NUT HEX NYLOCK 1/2-13 SCR HX SKT BUT CP 3/8-16X2 1/2 SPRING COMP DIE.75X.375X1.50L LID SWIVEL WELDMENT PIN ROLL 1/2 X 1 3/4 BIN LID TOP CROSS BAR WASHER FLAT 3/8 SAE PLT NUT LOCK 3/8-16 NYLON INSERT U-BOLT 3/8-16 X 2 5/8 X 3 1/4 NUT HEX 3/8-16 PLT SEED HOPPER REAR GASKET SEED HOPPER TRANSITION NUT MAC-LOK FLG 3/8-16 GR F SEED HOPPER INSIDE REAR PLATE SEED HOPPER INSIDE SIDE PLATE SEED HOPPER INSIDE FRONT PLATE NUT HEX COUPLER 3/8-16X1 3/4 11/06/ p

22 Table of Contents 150 BU Bulk Hopper Part Number Index p /06/18

23 Table of Contents Part Number Index Frame 150 BU Bulk Hopper Ref. Part No. Part Description Comments Revision dwg D D C C C C D C H H C C C C H C H C C C C H D H C C C C C D C C C C D C H C C C C C H C C C C C C D H C C C C D D Image No. 4 IN NYLON STRAP FOR 150BU BIN PLANTER HOPPER 150 BU TRIMMED HHCS 3/4-10X8 GR5 PLT WASHER FLAT 3/4 SAE PLT SCR HX SKT BUT CP 3/8-16X2 1/2 SPRING COMP DIE.75X.375X1.50L LID SWIVEL INNER PIVOT TUBE FLNG BUSHING 1 1/8 X 1 X 3/4 LID SWIVEL WELDMENT AIR DRILL BIN LID HANDLE WLMNT NUT HEX NYLOCK 1/2-13 WASHER FLAT 3/8 SAE PLT NUT LOCK 3/8-16 NYLON INSERT HHCS 1/2-13X2 1/2 GR5 AIR DRILL BIN LID HOOK PIN ROLL 1/2 X 1 3/4 ROUND BIN LID WELDMENT U-BOLT 3/8-16 X 2 5/8 X 3 1/4 NUT HEX 3/8-16 PLT HHCS 1/4-20X1 GR5 WASHER FLAT 1/4 HARD ASTMF436 STRAINER BASKET WELDMENT ADC2350 BIN LID SEAL LID FLANGE WELDMENT RHSNB 3/8-16X1 1/2 GR5 U-BOLT 5/16-18X1 1/2X2 1/2 RND NUT HEX 3/4-10 PLT NYLOCK WASHER FLAT 5/16 USS PLT NUT HEX NYLOCK 5/16-18 PLT INSIDE BIN LADDER MNT NUT FLANGE LOCK 3/8-16 PLT WASHER FLAT 3/8 NEOPRENE PLT HHCS 3/8-16X1 1/2 GR5 WASHER FLAT 3/8 USS PLT BIN LID TOP CROSS BAR NUT HEX COUPLER 3/8-16X1 3/4 SEED HOPPER LADDER DJ HOPPER LEVEL SENSOR U-BOLT 3/4-10 CORNER 7 SQ WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT HHCS 1/2-13X5 1/2 GR5 BOLT ON 150BU ARCH CNCT YP16-2 U-BOLT 1/2-13X4 9/16X6 1/16RND NUT HEX WHIZ 1/2-13 PLT GR5 WASHER FLAT 1/2 SAE PLT WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT RHSNB 1/2-13X2 1/4 GR5 TANK STRAP ATTACHMENT PLATE 150 BUSHEL HOPPER TRANSITION 150BU HOPPER FRONT SEAL HHCS 3/8-16X1 GR5 150BU HOPPER REAR SEAL NUT MAC-LOK FLG 3/8-16 GR F 150 HOPPER SIDE PLT 150 HOPPER FRONT REAR PLT 11/06/ p

24 Lights Table of Contents Part Number Index p /06/18

25 Lights Table of Contents Part Number Index Frame Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C C C Image No. HHCS 1/4-20X1 1/4 GR5 LIGHT, AMBER LAMP LED NUT LOCK 1/4-20 PLT LIGHT, RED LAMP - LED SCREW HEX SELF TAP 1/4-20X3/4 SCREW PAN HD 1/4-20 X 3/4 DECAL SLOW MOVING-GALV. BACKED WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT AG LIGHT HARNESS EXT - 20' LED LIGHT HARNESS, 35' LEAD - LED LIGHT HARN WISHBONE 171 OFST 11/06/ p

26 Fan to Frame Table of Contents Part Number Index p /06/18

27 Fan to Frame Table of Contents Part Number Index Frame Ref. Part No. Part Description Comments Revision dwg C C C C C C D H C C C C H H C C C C C C D C D C C H C C D C C C Image No. 6 HYD FAN W/CASE DRAIN MOTOR CLAMP WRM DRV #96SS ( ) HOSE 6.0 ID DUCTING X 11.0 FT HHCS 3/8-16X1/2 GR5 NUT LOCK 3/8-16 PLT HFS X 3/4 PLT CRARY FAN SHUTTER DISK CRARY FAN SHUTTER LH HHCS 1/4-20X5/8 GR5 WASHER FLAT 1/4 SAE PLT NUT HEX FLANGE 1/4-20 PLT NUT HEX NYLOCK PLT WELDED TUBE FAN SPLITTER YP FAN MOUNT WLDMNT 2 HFSS 1/4-20X1 GR5 NUT HEX 3/8-16 PLT WASHER LOCK SPRING 3/8 PLT HHCS 3/8-16X1 GR5 HOSE 6.0 ID DUCTING X 2.0 FT NUT LOCK 5/16-18 PLT SEED TUBE RETAINER CAP CLAMP WRM DRV#28 SS( ) HOSE 1 1/2 ID 250PSI EPDM TUBE SEED DELIVERY 50 AL HHCS 5/16-18X5 GR5 SEED TUBE SUPPORT HHCS 3/8-16X1 1/4 GR5 6" FAN SCREEN CAP FAN INLET RAIN SHIELD SCREW #14X1/2 HWH T-AB ZP WELDMENT SCREEN FLAT WASHER 1/4 BRKT FAN SENSOR MOUNT MUELLER CASTING 6 FAN HOUSING RH SIDE IND. SENSOR M12X60 PLASTIC PLUG 1/4 PLASTIC PLUG 7/16 BUSHING 20MM 13 FAN IMPELLER BOLT, 1/2X1 3/4 HEX HD WASHER 1/2 SAE FLAT CASTING 6 FAN HOUSING LH SIDE NUT, 1/2-13 NYLOCK-FLANGE SCREW HEX 5/16-12X3/4 THD FRM HUB/MOTOR PLATE SEAL (2B) CRARY FAN MOTOR B MOUNT PLATE PARKER F-11 FAN MTR ( ) 11/06/ p

28 Air Box Table of Contents Part Number Index p /06/18

29 Air Box Table of Contents Part Number Index Frame Ref. Part No. Part Description Comments Revision dwg C C H C C C D C D C D C D C C C C D D C D Image No. HHCS 3/8-16X1 GR5 AIRBOX TOP GASKET AIRBOX MAIN WELDMENT NUT LOCK 3/8-16 PLT NUT MAC-LOK FLG 3/8-16 GR F RHSNB 3/8-16X1 GR5 3/8" BOLT SPACER NUT HEX 3/8-16 PLT ROD 3/8-16X26 NUT HEX WHIZ 5/16-18 PLT AIRBOX BOTTOM PLATE RHSNB 5/16-18X3/4 GR5 AIRBOX END PLATE SINGE OUTLET AIRBOX MANIFOLD AIR BOX OUTLET 1.25 CLAMP WRM DRV#28 SS( ) DOOR SEAL 3X5.75X.38 TUBE RND 3/4ODX3/16WX1/2L BAR RND 5/16X24 3/4 USEABLE PIN COTTER 1/8 X 3/4 AIR BOX DOOR PLATE 11/06/ p

30 Seed Delivery Table of Contents Part Number Index p /06/18

31 Seed Delivery Table of Contents Part Number Index Frame Ref. Part No. Part Description Comments Revision dwg C D C C C C C S C C C C C C D D C C C C C D D C D C C C C D C C C H C C C C C C C D R C C S C Image No. CLAMP WRM DRV#28 SS( ) HOSE 1 1/2 ID 250PSI EPDM TUBE SEED DELIVERY 10 AL U-BOLT 5/16-18X1 1/2X2 1/2 RND HHCS 1/2-13X1 1/4 GR5 SEED DELIVERY TUBE 006 AL CLAMP WRM DRV #24 SS (1.06-2) PLANTER Y-TRANSITION ASY SEED DISCHARGE HOSE 42 HOSE BOOT LOCK RING AIR PLANTER HOSE SPLITTER SHOULDER BOLT 1/4X1/4X10-24 Y-TUBE GATE NUT HEX FLG TP LK 5/16-18ZNYCR LH SEED DEL TUBE BRKT SEED HOSE SUPPORT PLT WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT NUT HEX 5/8-11 PLT WASHER LOCK SPRING 5/8 PLT HHCS 5/8-11X1 3/4 GR5 FTHD 6IN HOSE CLAMP HALF 6IN HOSE CLAMP RHSNB 5/16-18X3/4 GR5 SEED TUBE SUPPORT CLAMP U-BOLT 5/16-18 X 1 17/32X2 1/8 HHCS 5/16-18X5 GR5 WASHER FLAT 5/16 SAE PLT HHCS 5/16-18X2 3/4 GR5 SEED DELIVERY INSIDE MOUNT NUT HEX 3/8-16 PLT HHCS 3/8-16X1 GR5 CAP - 1 1/2 TUBE YP16II LEFT SEED HOSE BRACKET SEED DELIVERY TUBE 174 AL SEED DELIVERY TUBE 144 AL SEED DELIVERY TUBE 114 AL SEED DELIVERY TUBE 84 AL SEED DELIVERY TUBE 54 AL SEED DELIVERY TUBE 24 AL CHAIN LINK SNAP 1/4 PLT NO-TILL SUPPORT CHAIN LONG HOSE PVC 1 1/4ID CLAMP WRM DRV #32SS ( ) NYLON STRAP 20X2 AIR PLANTER HOSE ADPTR W/GATE AIR PLANTER HOSE ADPTR W/GATE 11/06/ p

32 Table of Contents Air Hose Tower Mount Part Number Index p /06/18

33 Table of Contents Part Number Index Frame Air Hose Tower Mount Ref. Part No. Part Description Comments Revision dwg C D C C C D C Image No. RHSNB 5/16-18X3/4 GR5 6IN HOSE CLAMP NUT HEX FLG TP LK 5/16-18ZNYCR WASHER LOCK SPRING 5/16 PLT HHCS 5/16-18X1/2 GR5 6IN HOSE CLAMP HALF U-BOLT 5/16-18 X 1 17/32X2 1/8 11/06/ p

34 Table of Contents Air Pressure Assembly Part Number Index p /06/18

35 Table of Contents Part Number Index Frame Air Pressure Assembly Ref. Part No. Part Description Comments Revision dwg C C D R C S C C C C C C Image No. NUT HEX 5/16-18 PLT WASHER LOCK SPRING 5/16 PLT CLAMP, MANIFOLD 4 INCH HOSE 1/4 RUBBER AIR HHCS 5/16-18X2 1/2 GR5 SENSOR CHAMBER ASY AD 7/16MORB X 1/4HB CLAMP SPRING BAND 1/2 OD HOSE EL 45 7/16MORB X 1/4HB NUT HEX JAM 7/16-20 PLT AD 1/8MNPT X 1/4HB BRASS MAGNEHELIC PRES GAGE-0-6 INH2O 11/06/ p

36 Table of Contents Battery and Alternator Mounting Part Number Index p /06/18

37 Table of Contents Part Number Index Frame Battery and Alternator Mounting Ref. Part No. Part Description Comments Revision dwg C C C C D C C C D C C C C C C C C C C C D C C C C C C C C C C C C C C C C H C C C S C C C C C C C C C C C C C C C Image No. BATTERY STORAGE BOX DEEP CYCLE 12V BATTERY YP16 BATTERY CONNECTION CABLE MOTOR GEAR.36CIR ALTERNATOR END CAP HHCS 5/16-18X1 GR5 WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT ALTERNATOR COVER NUT CLIP U-TYPE 5/16-18 J-BOLT 3/8-16 X 10 NUT HEX 3/8-16 PLT WASHER LOCK SPRING 3/8 PLT BATTERY GROUND CABLE BAT DISCONNECT 6-36V 180AMP HHCS 1/4-20X3/4 GR5 WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT BATT PWR CABLE SOLENOID 24VDC 200 AMP ALTERNATOR RPM WHEEL BATTERY POWER CABLE 2 GA HHCS 1/4-20X2 1/4 GR5 WASHER FLAT 1/4 SAE PLT P.C. FLOW CONTROL VALVE 5GPM PULLEY 4.25 PD X 7/8 ID A-SEC WASHER FLAT 7/8 SAE PLT AD 3/4MORB 3/4FJIC CP 3/4FJIC HYD CHECK 3/4FORB 3/4MJIC TE 1 1/16MORB 3/4MJIC FILTER INLINE 1 1/16 FORB EL 3/4MJIC 1 1/16MORB EL 3/4FJIC 3/4MJIC TE 3/4MJIC 3/4MJIC 3/4FJIC TE 3/4MORB 3/4MJIC 3/4MJIC PRESTOLITE SCJ3292 ALTERNATOR ALTERNATOR MOUNT WELDMENT HHCS 1/2-13X1 3/4 GR5 FTHD WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT DJ FAN RPM SENSOR THRD HALL HHCS 1/4-20X1 1/2 GR5 HHCS 1/2-13X1 1/4 GR5 EL 45 3/4MJIC 3/4FJIC EL 7/8MORB 3/4MJIC EL 9/16MJIC 9/16MORB NUT LOCK 3/8-16 PLT WASHER FLAT 3/8 SAE PLT AD 3/4MJIC 7/8MORB HHCS 1/2-13X5 3/4 GR5 HHCS 3/8-16X1 1/2 GR5 PULLEY 4" PD X 3/4 ID A-SEC V-BELT A-SEC 37 SPRING EXT. 1.0ODX5.OLX.095MW NUT HEX FLANGE LOCK 5/8-18 PLT DOUBLE DISK ARM PIVOT BUSHINGS 11/06/ p

38 Table of Contents Part Number Index Battery and Alternator Mounting (continued) Ref Part No H C C C D C Part Description 6IN IDLER SWING ARM HHCS 5/8-11X3 GR5 NUT HEX 5/8-11 PLT WASHER LOCK SPRING 5/8 PLT IDLER PULLEY SPACER PULLEY, 4.0ODX.631DX.72W IDLER Comments Revision p /06/18

39 Table of Contents Part Number Index Frame Battery and Alternator Mounting (continued) This Page Intentionally Left Blank 11/06/ p

40 Gauge Wheels Table of Contents Part Number Index p /06/18

41 Gauge Wheels Table of Contents Part Number Index Transport Ref. Part No. Part Description Comments Revision dwg C H C C H C C C C C D D C C C D C C C H C C D H C D D C C H C C H D C C D H D C C C C C C C C D C C C D C C C Image No. CYL REP 4.25X27.75X2.00 TIE CYL PIN NR 1.25X3.63USBX3.13CH PIN COTTER 3/16 X 2 CYL REP 4.50X10.37X1.5 ROD TIE EYEBOLT WELDMENT NUT HEX 1 1/2-6 PLT WASHER LOCK 1 1/2 PLT NUT HEX JAM 1 1/2-6 PLT HHCS 1/2-13X1 1/4 GR5 WASHER LOCK SPRING 1/2 PLT NTA CASTER RETAINER CAP BULK SEED CASTER VERT SHAFT HHCS 1/4-20X5/8 GR5 HHCS 5/8-11X3 GR5 TONGUE SPACER SKID BLOCK SLIDER BLOCK ADJUST SHIM NUT HEX 1-8 PLT WASHER LOCK SPRING 1 PLT WASHER FLAT 1 SAE YP LH TONGUE SWAY BLOCK NUT HEX FLANGE 5/8-11 PLT GREASE ZERK STRAIGHT 1/ P CASTER INNER PIVOT TUBE 16R CASTER LOWER SWIVEL WLD 2 PIN BENT.38X3.0 USBL W/PIN CYLINDER LOCK CHANNEL CYLINDER LOCK TOP CHANNEL PIVOT THRUST WASHER NUT LOCK 3/4-10 PLT WIDE CASTER LOWER WLDMNT HHCS 3/4-10X6 1/2 GR5 HHCS 3/4-10X5 GR5 16R PARALLEL ARM WLDMNT 2 CASTER SWIVEL PIVOT PIN NUT LOCK 5/8-11 PLT HHCS 5/8-11X4 GR5 CASTER SPACER 16R CASTER MOUNT SWIVEL 2 WASHER - SAFETY CHAIN SA TIRE AW 711 VF 480/45 R17 RIM 17X16 8BLT 6 PILT 8 BC VALVE STEM METAL TR-575 TUBLES SPINDLE SGL 2.73X BOLT HUB SEAL BRG CONE 2.00IDX1.18WD #3780 BRG CUP 3.67ODX.93WD #3720 HUB STUD 5/8-18X2 3/4 GR8 PLT. 8-BOLT WHEEL HUB MACH. NUT LUG 5/8-18 X 90 DEG PLT BRG CUP 3.00ODX.75WD #2720 BRG CONE 1.31IDX1.01WD #2790 7/8 SPINDLE WASHER, HARDENED PIN COTTER 3/16 X 1 1/4 PLT NUT HEX SLOTTED 7/8-14 PLT HUB CAP 11/06/ p

42 Transport Wheels Table of Contents Part Number Index p /06/18

43 Table of Contents Part Number Index Transport Transport Wheels Ref. Part No. Part Description Comments Revision dwg Image No C HHCS 1-8X5 1/2 GR C 16R SPINDLE 10 BOLT GKN X C NUT HEX LOCK 1-8 PLT C HHCS 1/2-20X1 GR C WASHER LOCK SPRING 1/2 PLT D WHEELSENSOR TRIGGER PLATE GKN-P GREASE SEAL GKN ARMSTRONG C BRG CONE 2.50ID #39585 GG_P151409_1 DSGN START BLANK PART C BRG CUP 4.43ODX.93WD #39520 GKN-169B HUB 10-BOLT MACHINED CASTING C GREASE ZERK STRAGHT 1/8-28 BSP C BRG CONE 1.75IDX1.15WD # C BRG CUP 4.25ODX.87WD #453A C NUT HEX SLOTTED 1 1/4-12 PLAIN C PIN COTTER 7/32 X C DECAL CAUTION TIRE 49 PSI/ C TITAN OR GOODYR 8* 14.9R46 R C WHEEL X 10-BOLT C NUT HEX FLANGE 3/4-16 PLT P HUB CAP K 16R SPINDLE 10 BOLT HUB ASSY S 8 STAR 14.9R46 WHEEL ASSY S 8 STAR 14.9R46 WHEEL ASSY C TIRE 18.4R42 R1 3 STAR C DECAL CAUTION TIRE 30 PSI/ C VALVE STEM TR618AX.625X1.88LG K TIRE ASM 18.4R42 10 BOLT K TIRE ASM 18.4R42 10 BOLT C WHEEL W16AX42 10BOLT Right, Contains 17, 18, 19 and 26 Left, Contains 17, 18, 19 and 26 Right, Contains 24, 25, 26 and 28 Left, Contains 24, 25, 26 and 28 11/06/ p

44 Table of Contents Contact Drive Center Section Part Number Index p /06/18

45 Table of Contents Part Number Index Drive Contact Drive Center Section Ref. Part No. Part Description Comments Revision dwg C C D C C D C C D D C C C C C C H C D D D C D C C C C C D D C C C H C D C C C C D Image No. NUT HEX FLANGE 5/8-11 PLT SPKT IDLER BRG #50 15 TOOTH 3S-4000 MARKER CYL PIN SPACER HHCS 5/8-11X3 1/4 GR5 HHCS 5/8-11X2 1/2 GR5 SECONDARY DRIVE PLATE HHCS 5/8-11X4 3/4 GR5 RHSNB 5/8-11X2 1/2 GR5 SPACER BAR 3/8 DRIVE CHAIN ROUTING BRACKET HHCS 5/8-11X1 1/4 GR5 WASHER FLAT 5/8 USS PLT WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT NUT LOCK 3/4-10 PLT WASHER FLAT 3/4 SAE PLT UPPER PLATFORM WELDMENT PIN ROLL 1/4 X 2 1/2 PLT LINK PIVOT BUSHING TRUNNION PIN TOGGLE SIDE PLATE NUT HEX JAM 3/4-10 PLT LINK ROD BUSHING CYL 1 1/4 X 1 X 1 PIN CLVS.75X2.27 USBL PIN COTTER 5/32 X 1 PLT PIN CLVS 1.0X2.27 USBL GR5 PIN COTTER 3/16 X 1 3/4 PLT TUBE-8X6X.38, 54 DEG END CHAIN RL # PITCHES HHCS 1/2-13X1 1/4 GR5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT DRIVE SHAFT SUPPORT WLDMNT PIN ROLL 1/4 X 1 1/2 LG PLT YP16II LEFT CENTER DRIVE SHAFT RHSNB 5/16-18X3/4 GR5 FLANGETTE 52 3-BOLT PLT BRG INS 7/8HEXX2.04OD SPH NUT HEX FLG TP LK 5/16-18ZNYCR YP16II RIGHT CENTER DRV SHAFT 11/06/ p

46 Table of Contents Contact Drive Left Section Part Number Index p /06/18

47 Table of Contents Part Number Index Drive Contact Drive Left Section Ref. Part No. Part Description Comments Revision dwg C C C D C C C D C C C C C C C C C D D C D D D C C D C C C H C D C C D D C D S C C C C C C D C D C H C C C C C C C Image No. PIN CLVS.75X2.27 USBL PIN COTTER 5/32 X 1 1/4 LG PIN ROLL 1/4 X 1 1/2 LG PLT CYL PIN WASHER MACH 1.5X1.00X.075 EYE BOLT 3/4-10X14 3/4 LG SP HHCS 3/4-10X2 GR5 DUAL SPRING ANCHOR BAR WASHER FLAT 3/4 USS PLT WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT RHSNB 5/16-18X1 1/4 GR5 FLANGETTE 52 3-BOLT PLT BRG INS 7/8HEXX2.04OD SPH NUT HEX FLG TP LK 5/16-18ZNYCR WASHER MACH 1.50 X 1.00 X 18GA SPKT 50C17 X 7/8 HEX BORE SPRING 2.25 O.D. X.5 COIL COULTER SPRING WASHER NUT HEX JAM 3/4-10 PLT CHAIN RL #50 57 PITCHES CHAIN RL #50 91 PITCHES CHAIN RL #50 88 PITCHES HHCS 5/8-11X3 1/2 GR5 SPKT IDLER BRG #50 15 TOOTH 3S-4000 MARKER CYL PIN SPACER WASHER FLAT 5/8 USS PLT WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT CONTACT WHEEL BRACKET HHCS 1/2-13X1 1/2 GR5 PW ROCKSHAFT HALF BAND WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT SHAFT 7/8 HEX X SHAFT 7/8 HEX X SCREW SET 5/16-18 SKT KP X 3/8 COLLAR LOCK 7/8 HEX LOCK COLLAR, 7/8 HEX W/ SET SC SPKT 50C60 X 7/8 HEX BORE SPKT 50C25 X 7/8 HEX BORE SPKT 50C30 X 7/8 HEX BORE PIN LINCH 3/16 X 1 9/16 LONG SPKT 50C15 X 7/8 HEX BORE NUT LUG 1/2-20X60DEG PLT(.75AF CONTACT WHEEL HUB CENTER TUBE TIRE WHLASM20X TURF BKSN CONTACT WHEEL HUB MOUNT PLATE HUB STUD 1/2-20X1 5/8 GR5 SPROCKET STORAGE WLDMENT LONG SPKT 50C28 X 7/8 HEX BORE NUT HEX FLG LOCK 1/2-13 PLT SPKT 50C19 X 7/8 HEX BORE SPKT 50C20 X 7/8 HEX BORE SPKT 50C24 X 7/8 HEX BORE SPKT 50C26 X 7/8 HEX BORE SPKT 50C27 X 7/8 HEX BORE Contains 37 & 38 11/06/ p

48 Table of Contents Contact Drive Right Section Part Number Index p /06/18

49 Table of Contents Part Number Index Drive Contact Drive Right Section Ref. Part No. Part Description Comments Revision dwg D D D C C C D C C C C C C C C C D C H S C C D C D C C C D C D C C C C D C H C D C C C C C C Image No. CHAIN RL #50 91 PITCHES CHAIN RL #50 57 PITCHES CHAIN RL #50 88 PITCHES NUT HEX 5/8-11 PLT WASHER LOCK SPRING 5/8 PLT WASHER FLAT 5/8 USS PLT 3S-4000 MARKER CYL PIN SPACER SPKT IDLER BRG #50 15 TOOTH HHCS 5/8-11X3 1/2 GR5 RHSNB 5/16-18X1 1/4 GR5 FLANGETTE 52 3-BOLT PLT BRG INS 7/8HEXX2.04OD SPH NUT HEX FLG TP LK 5/16-18ZNYCR SPKT 50C23 X 7/8 HEX BORE PIN LINCH 3/16 X 1 9/16 LONG PIN ROLL 1/4 X 1 1/2 LG PLT SHAFT 7/8 HEX X SPKT 50C30 X 7/8 HEX BORE RH CONTACT WHEEL ARM STD WLDMT LOCK COLLAR, 7/8 HEX W/ SET SC SPKT 50C25 X 7/8 HEX BORE SCREW SET 5/16-18 SKT KP X 3/8 COLLAR LOCK 7/8 HEX SPKT 50C17 X 7/8 HEX BORE SHAFT 7/8 HEX X HHCS 1/2-13X1 1/2 GR5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT PW ROCKSHAFT HALF BAND HHCS 1/2-13X2 3/4 GR5 HALF CLAMP 3 IN TUBE ROUND NUT HEX FLG LOCK 1/2-13 PLT SPKT 50C28 X 7/8 HEX BORE SPKT 50C19 X 7/8 HEX BORE NUT LUG 1/2-20X60DEG PLT(.75AF CONTACT WHEEL HUB CENTER TUBE TIRE WHLASM20X TURF BKSN SPROCKET STORAGE WLDMENT LONG SPKT 50C60 X 7/8 HEX BORE CONTACT WHEEL HUB MOUNT PLATE HUB STUD 1/2-20X1 5/8 GR5 SPKT 50C15 X 7/8 HEX BORE SPKT 50C20 X 7/8 HEX BORE SPKT 50C24 X 7/8 HEX BORE SPKT 50C26 X 7/8 HEX BORE SPKT 50C27 X 7/8 HEX BORE 11/06/ p

50 Hydraulic Drive Table of Contents Part Number Index p /06/18

51 Hydraulic Drive Table of Contents Part Number Index Drive Ref. Part No. Part Description Comments Revision dwg C C C C D C D C C C C C C C C C C H S C C C D D C C C C C C D C C C D C C C C C C D D H C C C Image No. NUT HEX FLANGE 5/16-18 PLT FLANGETTE 52 3-BOLT PLT BRG INS 7/8HEXX2.04OD SPH RHSNB 5/16-18X3/4 GR5 7/8 HEX SHAFT SPACER TB X 1/2 SCREW SET 5/16-18 SKT KP X 3/8 COLLAR LOCK 7/8 HEX EL 3/4MJIC 3/4MORB FILTER ASM 6000PSI 6MICRON TE 3/4MJIC 3/4MORB 3/4MJIC CP 3/4FJIC AD 3/4MORB 3/4FJIC PRESSURE COMP PWM VALVE EL 45 3/4MORB 3/4MJIC HHCS 1/4-20X5 GR5 PLT NUT HEX 1/4-20 PLT WASHER LOCK SPRING 1/4 PLT YP16-2 HYD DRIVE MNT APPLICATION RATE SENSOR SCREW SET SCKT HD 1/4-20X3/8 SCREW RD HD SLT 10-24X1/2 PLT NUT HEX NYLOCK PLT AP RATE SENSOR TORQUE ARM SHAFT HEX 7/8 X 15 PIN ROLL 1/4 X 1 1/2 LG PLT HHCS 1/4-20X3/4 GR5 WASHER MACH 1.50 X 1.00 X 18GA NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1/2 USS HARD PLT TUBE RND 1 OD X 7/32WL X 2.25 IDLER SPOOL # X1.01X1.31 HHCS 1/2-13X3 1/2 GR5 SPKT 50C25 X 7/8 HEX BORE CHAIN RL #50 77 PITCHES NUT HEX WHIZ 1/2-13 PLT GR5 HHCS 3/8-16X1 1/4 GR5 WASHER LOCK SPRING 3/8 PLT HFSS 1/2-13X1 1/4 GR8 MOTOR 8.8 CU IN FC6 MNT KEYED HHCS 1/2-13X1 1/4 GR5 HEX SHAFT 7/8HEX X 25 AR SHAFT HEX 7/8X24 DRIVE AD 7/8HEX X 1RND W/KW AD 3/4MJIC 7/8MORB AD 3/4FORB 7/8MORB VALVE INLINE CHECK W/ ORIFICE 11/06/ p

52 Table of Contents Tru-Count Clutch Assembly Part Number Index p /06/18

53 Table of Contents Part Number Index Drive Tru-Count Clutch Assembly Ref. Part No. Part Description Comments Revision dwg C C C C C C C C D S C R C C C D D C C C C C D C C C C D H H H C C D C D D D C C H C C D C C D C D C D D C C C S Image No. TRU-COUNT VALVE ASM EXTENSION HARNESS 40' 6 PIN WP DJIA OUTPUT HARN 8-CH TRU-COUN CP 1/4 PUSH LOK POLY HHCS 1/4-20X1 1/4 GR5 WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT U-BOLT 3/8-16 X 7 1/32 X 7 7/8 NUT FLANGE LOCK 3/8-16 PLT TRU-COUNT VALVE MODULE BRACKET PLNTR CNTRL OUTPUT MODULE(POM) TE POLY 1/4 PUSH LOCK TUBE NYLON 1/4OD X 062WL SPKT 41C12 W/SS SPCL PLT SPKT 50C25 X 7/8 HEX BORE PEER 7/8 HEX BRG AND MNT OFFSET BRG BRACKET OFFSET BRG BRACKET LH NUT HEX 3/8-16 PLT WASHER LOCK SPRING 3/8 PLT HHCS 3/8-16X1 GR5 TRUE COUNT RH AIR CLUTCH HHCS 1/4-20X2 1/2 GR5 TRU-COUNT HUB SNAP RING EXT BASIC 1 3/16 RUBBER FLG BUSH.189ID.36OD WASHER FLAT #10 SAE PLT HSHCS #10-32X1 KEY.250X.125X1.00 RECT TRU-COUNT 15 IN SPKT TUBE TRU-COUNT 15 IN LH SPKT TUBE TRU-COUNT TR SPKT TUBE REP SPKT 41B12 SPCL FLG BSHG 30MMX32MMX12MM ADAPTER 7/8 HEX 1 1/4 RND BORE HHCS 3/8-16X1 3/4 GR5 SPACER PLATE FRT BEARING SPACER SHIM FRT BRG TRU COUNT TRU-COUNT AIR TANK MOUNT PLATE HHCS 3/8-16X3/4 GR5 TRU-COUNT COMPRESSOR ASSEMBLY TRU-COUNT TR REVERSE SPKT TUBE TRU-COUNT LH AIR CLUTCH HHCS 1/4-20X1 GR5 SUPT BRACKET HEX BRG HHCS 3/8-16X1 1/2 GR5 WASHER FLAT 3/8 SAE PLT STEP BUSHING FOR OPENER BRG HHCS 1/4-20X1 1/2 GR5 ADAPTER TC CLUTCH 41A12 SPKT HSHCS #10-32X5/8 TRU-COUNT SPKT RETAINER RING SPKT 41A12 3HOLE TC WASHER LOCK INTERNAL #10 SS HSHCS #10-32X7/8 TRU-COUNT AIR TANK ASM LOCK COLLAR, 7/8 HEX W/ SET SC RH Bracket (Shown) LH Bracket RH clutch NO 3PYP YP40 & YP24 ALL Used on single row assembly Used on single row assembly Used on single row assembly Used on single row assembly Used on single row assembly Used on single row assembly Used on single row assembly 11/06/ p

54 Table of Contents Part Number Index Tru-Count Clutch Assembly (continued) Ref Part No C C C C C C C C C C C C C C C A C C C C C C C D C D D C D M Part Description HHCS 1/4-20X3/4 GR5 WASHER FLAT 1/4 SAE PLT WASHER LOCK # TRU CNT FIT.1/4MNPTX1/ TRU CNT HOSE FOR COMPRES TRU CNT MAN CMP 350/450C TRU COUNT MINI BALL VALV S (10PK)TRU CNT TB FIT TRU CNT SWTCH PSI TRU CNT BRSS TNK DRN 1/ TRU CNT VALV ENCLOSUR TRU CNT STRN RELIEF LIQ TRU COUNT AIR VALVE SING HSHCS M8X1.25X30 GR8.8 PLT SPKT 50A25 CLUTCH METRIC BORE YP16II MANUAL SECTION CLUTCHES TRIMBLE 11' EXT. HARN TRIMBLE BATT LEAD CAB TRIMBLE 8' EXT. HARN HARNESS, COMPRESSOR, CONTROL HARNESS, COMPRESSOR, PWR 16' HARNESS, COMPRESSOR, Y-HARNESS KEY 1/4 X 3/16 X 3.80 BUSHING 1 1/8 ODX7/8 HEX BORE BUTTON PLUG 7/8 ROUND HOLE CLUTCH SPROCKET SPACER CLUTCH OIL SHIELD OGURA CLUTCH INVERTED TRU-COUNT COMP MOUNT MANUAL YP TRU COUNT OPERATOR Comments Revision p /06/18

55 Table of Contents Part Number Index Drive Tru-Count Clutch Assembly (continued) This Page Intentionally Left Blank 11/06/ p

56 Air Meter Table of Contents Part Number Index p /06/18

57 Air Meter Table of Contents Part Number Index Meter Ref. Part No. Part Description Comments Revision dwg C C C C C D D C C D C C C C C C C C C C V C C C C C C C C C C C C C H C C C D D C C D C C C C C H C C Image No. NYLON HOSE CLAMP 1 11/16- LG AIR MTR SCREEN CONE HALF AIR METER SD TB SCRN CONIC CLAMP HOSE NYLON GF MATRIX 192 SPRING EXT. 1.0ODX5.OLX.095MW PLATE, SPRING HOOK BRACKET, SEED CONE MOUNT HHCS 5/16-18X3/4 GR5 NUT HEX WHIZ 5/16-18 PLT HOUSING MACH AIRMTRG2 MECH DRV AM BRUSH HOLDER BRUSH, STRIP, LONG BRUSH, SEED DROP AIR MTR BRUSH HOLDER SNAP WASHER WAVE SPRG 0.65ID 0.79OD WASHER FLAT 5/16 USS PLT HSBHCS 5/16-18X3/4 GR5 RHSNB 5/16-18X2 GR5 BRUSH, STRIP, SHORT BRG 0.625ID X1.375OD X0.43 SHAFT AND DISK SEAT ASSY AIR MTR DISK CLAMP SPRING COMP 1.46ODX1.5X.112W WASHER FENDER 5/16 X 1 1/2 HHCS 5/16-18X5/8 GR5 SCREW HEX SLT X 1 BRUSH, 4 TUFTED HFS X 1/2 PLT LATCH, FLEXIBLE SNAP WITH SPCR BRUSH, KNOCKOUT AIR MTR RAIN COVER SEAL, AIR METER GATE GUIDE, AIR METER GATE SPRING COMP 0.61ODX0.051WX1.47 GATE GUIDE SEED CHUTE HALF RH BULK DELIV SEED CHUTE HALF LH BULK DELIV SCREW HEX X 1 THD FRMG GATE LOCK TAB GATE, SEED CONTROL WASHER WAVE SPRG 1.31ID 1.63OD SPKT 41B19 X 5/8 BORE W/KYWAY WASHER FLAT 5/8 14GA KEYHOLE WOODRUFF KEY #606 NUT HEX JAM NYLOCK 5/8-18 PLT IDLER SPOOL 2.38X1.01X0.90 TUBE, SS PM IDLER PIVOT BUSHING.63 ID X.75 OD.62 L IDLER WMT NUT HEX TOP LOCK 5/16-18 PLT NUT HEX 5/16-18 PLT 11/06/ p

58 I.R.C. Meter Table of Contents Part Number Index p /06/18

59 I.R.C. Meter Table of Contents Part Number Index Meter Ref. Part No. Part Description Comments Revision dwg C C C C C D C D C C C C C C C C C C V C C C C C C C C C C C C C C H C C C D D C C C C C C C C C Image No. NYLON HOSE CLAMP 1 11/16- LG AIR MTR SCREEN CONE HALF AIR METER SD TB SCRN CONIC CLAMP HOSE NYLON GF MATRIX 192 NUT HEX WHIZ 5/16-18 PLT BRACKET, SEED CONE MOUNT HHCS 5/16-18X3/4 GR5 HOUSING MACH AIRMTRG2 ELECTDRV AM BRUSH HOLDER BRUSH, STRIP, LONG BRUSH, SEED DROP AIR MTR BRUSH HOLDER SNAP WASHER WAVE SPRG 0.65ID 0.79OD WASHER FLAT 5/16 USS PLT HSBHCS 5/16-18X3/4 GR5 HHCS 1/4-20X5/8 GR5 BRUSH, STRIP, SHORT BRG 0.625ID X1.375OD X0.43 SHAFT AND DISK SEAT ASYDINSPLN AIR MTR DISK CLAMP SPRING COMP 1.46ODX1.5X.112W WASHER FENDER 5/16 X 1 1/2 HHCS 5/16-18X5/8 GR5 SCREW HEX SLT X 1 BRUSH, 4 TUFTED HFS X 1/2 PLT LATCH, FLEXIBLE SNAP WITH SPCR BRUSH, KNOCKOUT AIR MTR RAIN COVER NUT HEX 5/16-18 PLT SEAL, AIR METER GATE GUIDE, AIR METER GATE SPRING COMP 0.61ODX0.051WX1.47 GATE GUIDE SEED CHUTE HALF RH BULK DELIV SEED CHUTE HALF LH BULK DELIV SCREW HEX X 1 THD FRMG GATE LOCK TAB GATE, SEED CONTROL WASHER WAVE SPRG 1.31ID 1.63OD NUT HEX JAM NYLOCK 5/8-18 PLT DOGA ELEC MOTOR SHAFT SEAL HHCS M6X1X25 GR8.8 FTHD WASHER LOCK M6 PLT WASHER FLAT 1/4 SAE PLT MOUNT MOTOR IRC AIR METER G2 DOGA 319 ELECT MOTOR DINSPLINE NUT HEX LOCK 1/4-20 FLG 11/06/ p

60 Table of Contents Part Number Index Air Meter Timing Tool with Spring and Wheel Wrench p /06/18

61 Table of Contents Part Number Index Meter Air Meter Timing Tool with Spring and Wheel Wrench Ref. Part No. Part Description Comments Revision dwg C C H C C C H C D Image No. TIMING TOOL, 19 TOOTH HHCS 3/8-16X1 GR5 TIMING TOOL HOLDER WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT PIN LINCH 3/16 X 1 9/16 LONG WRENCH HOLDER PIN, HAIR COTTER 3/16 WIRE DIA SPRING AND WHEEL WRENCH 11/06/ p

62 Table of Contents Opener Arms and Mounts Part Number Index p /06/18

63 Table of Contents Part Number Index Opener Opener Arms and Mounts Ref. Part No. Part Description Comments Revision dwg68880 TBD H H H C C C H H C C C C D D D C C C D C D C D D C H H C C D C C C C C TBD C TBD Image No. 25P REAR OPENER MOUNT WELDMT 25 REAR OPENER MNT WELDMT CLP 25P CLIPPED REAR MOUNT PIN HITCH 5/8 X 5 3/4 USABLE U-BOLT 5/8-11 X 7 1/32 X 8 1/2 NUT HEX FLG. LOCK 1/2-13 PLT. 25P FRONT OPENER MOUNT WELDMT 25P CLIPPED FRONT MOUNT WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT NUT FLANGE LOCK 3/8-16 PLT PEER 7/8 HEX BRG AND MNT CHAIN RL # PITCHES CHAIN RL # PITCHES CHAIN RL #41 94 PITCHES SPKT 41C12 W/SS SPCL PLT HFS 1/2-13X6 1/8GR5 PLT HHCS 3/8-16X1 GR5 25P REAR OPENER INNER PIVOT TB PARALLEL ARM PIVOT BUSHING 25 SRS LOWER PARALLEL ARM SPRING EXT OD X.225 W 25P LOWER SPRING LINK 25P UPPER SPRING LINK WASHER FLAT 3/8 SAE PLT 25 SERIES UPPER PARALLEL ARM 25 SERIES OPENER SHANK WELDMT HHCS 3/8-16X2 1/2 GR5 IDLER SPOOL 1.44OD X.53B X1.5L IDLER SPACER TUBE 1/2OD X 1.56 AM SEED TUBE DIRT GASKET HHCS 3/8-16X3/4 GR5 WASHER LOCK SPRING 3/8 PLT WASHER FLAT 5/8 USS PLT NUT HEX 3/8-16 PLT RHSNB 3/8-16X1 GR5 Used with Rear Opener Mount. Used with Middle Opener Mount. Used with Front Opener Mount. 11/06/ p

64 Opener Body Table of Contents Part Number Index p /06/18

65 Opener Body Table of Contents Part Number Index Opener Ref. Part No. Part Description Comments Revision dwg D C C C S H C C D D D D D D D C C C C C D D D D C C C C C C C C C C C D C D S C C C D H C D D C C C S C D Image No. SCRAPER, DISC LH NUT HEX WHIZ 5/16-18 PLT RHSNB 5/16-18X3/4 GR5 SCRW SET SQ HD 1/2-13X1 3/4GR5 SEED TUBE AM TB,CLIP & SENSOR 25P SCRAPER SEP WLDMT 3/8 FRT PIN ROLL 5/16 X 5/8 PLT PIN ROLL 5/16 X 7/8 WALKBEAM DISK SHIELD WALKBEAM PIVOT PIN SPINDLE, GA WHL MNT ADJ 25P SIDE DEPTH WHL ARM SPINDLE 25P SIDE DEPTH WHEEL ARM ARM, GAUGE WHEEL GREASE ZERK STRAIGHT 1/4-28 HHCS 1/2-13X3 GR5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT U CUP SEAL OUTER BUSHING INNER CUP SEAL I 25P O-RING BUSHING 25P DEPTH WHL ECCENTRIC BUSHNG ECCENTRIC BUSHING HHCS 5/16-18X2 1/2 GR5 RHSNB 5/16-18X3/4 GR5 HFS 1/2-13 X 1 1/2 GR8 NYL PLT 2.5X16 SIDE DEPTH WHEEL ASSY 3X16 SIDE DEPTH WHEEL ASSY 4 X 16 GAUGE TIRE ASSY-PLASTIC HHCS 5/8-11X3 1/4 GR5 HHCS 5/8-11 X 3 GR8 WASHER MACH 1.19 X.63 X 18GA WASHER LOCK SPRING 5/8 PLT WASHER FLAT 1.31ODX.65IDX.188T WALKBEAM MOUNT HHCS 5/8-11X1 1/2 GR5 NYL DD BRG FLANGE DUST COVER 4.0 MM 15 DISC W/ 5/8 ASSY HHCS 1/2-13X1 GR5 SEED TUBE AIRMETER 25 SER HHCS 1/2-13X1 1/2 GR5 1X12 PW ADJUSTER LONG PW MOUNT SNAP RING EXT 5/8.050 T 20 SER OPNR CAM PIN PLANTER HANDLE SPRING COMP.72 X 1.5 X.072WD WASHER 3/4 X 17/32 X 18 GA PLT PIN COTTER 3/32 X 1 LONG ADJUSTMENT ASSY PIN SPIRAL 1/4X1 1/2 SD HCS ZC COVER Includes items 33 & 57 Used on wide 20" & 30" rows Shown, used on narrow, twinrow, 15" Shown, Narrow Wide Shown, Narrow Wide Shown, Used on twinrow & 15" Used on 20" & 30" rows Refer to "Side Depth Wheel Assembly" for breakdown Refer to "Side Depth Wheel Assembly" for breakdown Refer to "Side Depth Wheel Assembly" for breakdown Used on twinrow only Used on 15", 20" & 30" rows Used on twinrow only Includes Items Includes items 9, 11, 28, 39-42, 44 & 45 11/06/ p

66 Table of Contents Opener Body (continued) Part Number Index Ref Part No D C C C C C C V C H D C S S C C C V C C D Part Description SCRAPER, DISC RH CABLE TIE.19X D 50LB PIN CLEVIS 1/4 X 2 1/2 PLT PIN COTTER 3/32 X 1 LONG RIBB BRG FLNG.266 MT HOLE PLT RIVET,BUTTON HEAD 1/4 X 1/2 4.0 MM 15 DISK (21 DEG BEVEL) BEARING AA205DD 25P ECCENTRIC HEX ADJUSTER 25P MID PW MOUNT SEED TUBE 25S HOOK CLIP DJ PLANTER STYLE SEED SENSOR 25P WIDE ELIMINATOR BUSHNG ASY 25P NARROW ELIMINATOR BUSH ASY SEED FLAP, UHMW, LONG SEED FLAP, RUBBER, SEED-LOK ELBOW PTC 1/4 X 3/8 FLANGE AND BRG ASSY CABLE TIE.19X15 PANDU BT4S-C0 RHSNB 1/2-13X1 1/2 GR5 TOP COVER Comments Includes items 50 & 53 Revision p /06/18

67 Table of Contents Part Number Index Opener Opener Body (continued) This Page Intentionally Left Blank 11/06/ p

68 Table of Contents Side Depth Wheel Assembly Part Number Index p /06/18

69 Table of Contents Part Number Index Opener Side Depth Wheel Assembly Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C C C C C C C Image No. 4 X 16 GAUGE TIRE ASSY-PLASTIC 2.5X16 SIDE DEPTH WHEEL ASSY 3X16 SIDE DEPTH WHEEL ASSY FLG TP LK 5/16-18ZNYCR 4 X 16 GAUGE WHEEL RIM 4 1/2 X 16 GAUGE TIRE BRG.63ID PRESS WHL ASY 4 X 16 GAUGE WHEEL RIM HALF HFSS 5/16-18X1 3/4 GR5 HFSS 5/16-18X1 GR5 PLT RHSNB 5/16-18X3/4 GR5 HFS 5/16-18X3/4 GR5 2.25X16'" TIRE FOR C 2.25X16'" RIM HALF FOR C 3X 16'" TIRE FOR C 3X16 NYLON WHEEL HALF-40MM 11/06/ p

70 Table of Contents 25 Series Keeton Seed Firmer (Option) Part Number Index p /06/18

71 Table of Contents Part Number Index Opener 25 Series Keeton Seed Firmer (Option) Ref. Part No. Part Description Comments Revision dwg BXT C C C C C Image No. KEETON NARROW TAIL BRACKET FOR C REV A&B RHSNB 3/8-16X1 3/4 GR5 NUT HEX 3/8-16 PLT WASHER LOCK SPRING 3/8 PLT NUT HEX WHIZ 5/16-18 PLT HHCS 5/16-18X2 1/2 GR5 11/06/ p

72 Table of Contents Seed Lok 6" Assy. ( K) Part Number Index p /06/18

73 Table of Contents Part Number Index Opener Seed Lok 6" Assy. ( K) Ref. Part No. Part Description Comments Revision dwg C D C H D C C D C D C C A C C C S D C D D Image No. PIN COTTER 5/32 X 1 1/4 LG LEVER, SEED LOK SPRING.540 O.D.X 1 1/4 X.054W LOCK ROD WELD SEED LOK MOUNT RHSNB 5/16-18X3/4 GR5 NUT HEX WHIZ 5/16-18 PLT JD KINZE SEED LOK LOWER MOUNT SNAP RING 1/2 EXTERNAL HEAVY SEED LOK WHEEL ARM SCR HX SKT BUT CP 3/8-16X3/4 WASHER INTERNAL STAR 3/8 PLT. RPBY V SCR PH THD FMG #10X1/2 TP ZP RETAINER W/BONDED SEAL 4BLT 5/8 X 6 SEED LOK WHEEL 6 SEED LOK ASSEMBLY WASHER MACH 1.50 X.510 X 10G SPRING EXT 1 X 4 X.135 WD SEED LOK PIVOT PIN LEVER STOP 11/06/ p

74 Table of Contents Terra-Tine 15" Wheel Part Number Index p /06/18

75 Table of Contents Part Number Index Opener Terra-Tine 15" Wheel Ref. Part No. Part Description Comments Revision dwg S S S C C C V D C C D C Image No. TERRA-TINE WHL SUB-ASSY 15 RH TERRA-TINE WHL SUB-ASSY 15 LH FRONT FLANGE BEARING ASSEMBLY HHCS 1/4-20X5/8 GR5 NUT HEX FLANGE 1/4-20 PLT HSG RIBB FLG 6BOLT PLT BEARING.760 BORE 205DD TERRA-TINE FLANGE FRONT SPRING TERRA-TINE FINGER 15 RHSNB 3/8-16X3/4 GR5 TERRA-TINE FLANGE BACK NUT HEX FLANGE 3/8-16 PLT 11/06/ p

76 Table of Contents Terra-Tine 16" Wheel Part Number Index p /06/18

77 Table of Contents Part Number Index Opener Terra-Tine 16" Wheel Ref. Part No. Part Description Comments Revision dwg S S S C C C V D C C D C Image No. TERRA-TINE WHEEL SUB-ASSY RH TERRA-TINE WHEEL SUB ASSY LH FRONT FLANGE BEARING ASSEMBLY HHCS 1/4-20X5/8 GR5 NUT HEX FLANGE 1/4-20 PLT HSG RIBB FLG 6BOLT PLT BEARING.760 BORE 205DD TERRA-TINE FLANGE FRONT SPRING TERRA-TINE FINGER RHSNB 3/8-16X3/4 GR5 TERRA-TINE FLANGE BACK NUT HEX FLANGE 3/8-16 PLT 11/06/ p

78 Double Terra-Tine Table of Contents Part Number Index p /06/18

79 Table of Contents Part Number Index Opener Double Terra-Tine Ref. Part No. Part Description Comments Revision dwg C C C C D D D D D D C C S C H C H C C C C C D C D H C C V C D C D H C K H C D K D D C C C S C C H H H H C D D C Image No. HHCS 1/2-13X4 GR5 HHCS 1/2-13X7 GR5 HHCS 1/2-13X5 GR5 WASHER LOCK SPRING 1/2 PLT CLAMP PLT 7 BAR SHANK 1 1/2D X 16 FERT COULT SHANK 1 1/2D X 19 FERT COULT SHANK 1 1/2DX12 5/8 FERT COULT 1 1/2 DIA X 14 SHANK CLAMP SHANK 1 1/2 DIA SCREW SQ HD 5/8-11 X 1 CUP PT 16IN ROUND SHANK 9.5IN OFFSET PIVOT ASSEMBLY RH SET SCREW SQ HD 3/4-10 X 1 1/4 DUAL FRAME MOUNT 15" TT NUT HEX FLG. LOCK 1/2-13 PLT. PIVOT MOUNT WELDMENT LH RHSNB 1/2-13X1 1/2 GR5 RHSNB 3/8-16X1 GR5 PARALLEL ARM PIVOT BUSHING WASHER 1 1/4 X 3/4 X 18 GA PLT SNAP RING 3/4 EXTERNAL HEAVY TERRA-TINE SPRING ADJUSTER LH NUT HEX FLANGE 3/8-16 PLT SPRING TERRA-TINE LEFT ASSY ARM SHAFT WELDMENT LH HHCS 1/4-20X5/8 GR5 RIBB BRG FLNG.266 MT HOLE PLT BEARING.760 BORE 205DD RHSNB 3/8-16X3/4 GR5 TERRA-TINE FLANGE FRONT SPRING TERRA-TINE FINGER 15 TERRA-TINE FLANGE BACK YP16-2 FRAME MOUNT WELDMENT NUT HEX FLANGE 1/4-20 PLT TERRA-TINE WHEEL 15 RH SHANK MOUNT PLATE WA HHCS 3/4-10X1 1/2 GR5 DD BRG FLANGE DUST COVER TERRA-TINE WHEEL 15 LH YP ATTACHMENT TUBE LH YP ATTACHMENT TUBE RH U-BOLT 5/8-11 X 4 1/32 X 3 3/8 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT PIVOT ASSEMBLY LH U-BOLT 5/8-11 X 7 1/32 X 8 1/2 1 1/2 X 20 X 7 OFFSET SHANK YP SHANK MOUNHT PIVOT LH YP SHANK MOUNT PIVOT RH YP LOW PRO 7 OFFSET SHANK WLD YP ATTACHMENT WLD PIN HHCS 5/8-18X2 3/4 GR5 CLAMP PLT 5 BAR TERRA-TINE EXTENSION ARM PIN ROLL 3/8 X 2 1/2 PLT Use with 5x7 bar clamp kit Use with items #47 and #32 11/06/ p

80 Table of Contents Single Arm RC Assembly Part Number Index p /06/18

81 Table of Contents Part Number Index Opener Single Arm RC Assembly Ref. Part No. Part Description Comments Revision dwg D H H C C C C C C C C C V V H C C C C C Image No. UMC RC PIVOT TUBE SINGLE ARM RC WLD RH SINGLE ARM RC WLD LH RHSNB 1/2-13X1 3/4 GR5 NUT HEX FLG. LOCK 1/2-13 PLT. ROW CLEANER HUB ASM RC ARM PIVOT BUSHING RC HUB LOCK RIGID 13'" ROW CLEANER RH RIGID 13'" ROW CLEANER LH DEPTH BEND WHEEL DECAL SHARP OBJECT WARNING RIGID ROW CLEANER ASM RH RIGID ROW CLEANER ASM LH UM ROW CLEAN DOWN STOP WLDM RHSNB 5/16-18X1 1/4 GR5 NUT HEX 5/16-18 PLT WASHER LOCK SPRING 5/16 PLT WASHER FLAT!/2 USS PLT WASHER FLAT 1 SAE Shown Refer to "Hub Assembly ( C & S) for breakdown Shown Shown 11/06/ p

82 Table of Contents Rigid 13" Row Cleaner Part Number Index p /06/18

83 Table of Contents Part Number Index Opener Rigid 13" Row Cleaner Ref. Part No. Part Description Comments Revision dwg D H C C C C C C C V V C C H C C C C C Image No. UMC RC PIVOT TUBE DOUBLE ARM RC WLD RHSNB 1/2-13X1 3/4 GR5 NUT HEX FLG. LOCK 1/2-13 PLT. ROW CLEANER HUB ASM RC ARM PIVOT BUSHING RC HUB LOCK RIGID 13'" ROW CLEANER LH RIGID 13'" ROW CLEANER RH RIGID ROW CLEANER ASM RH RIGID ROW CLEANER ASM LH DEPTH BEND WHEEL DECAL SHARP OBJECT WARNING UM ROW CLEAN DOWN STOP WLDM RHSNB 5/16-18X1 1/4 GR5 NUT HEX 5/16-18 PLT WASHER LOCK SPRING 5/16 PLT WASHER FLAT 1/2 USS PLT WASHER FLAT 1 SAE Refer to "Hub Assembly ( C & S)" for breakdown 11/06/ p

84 Table of Contents Row Cleaner Extension Mount Part Number Index p /06/18

85 Table of Contents Part Number Index Opener Row Cleaner Extension Mount Ref. Part No. Part Description Comments Revision dwg H H H H H H C C C C C D C Image No. UNIT MOUNTED COULTER MOUNT DBL ROW CLNR EXTENDED MNT LH DBL ROW CLNR EXTENDED MNT RH DOUBLE ARM RC WLD SINGLE ARM RC WLD LH SINGLE ARM RC WLD RH HHCS 7/8-9X2 GR5 NUT HEX 7/8-9 PLT NUT HEX FLG. LOCK 1/2-13 PLT. WASHER FLAT 1/2 USS PLT RC ARM PIVOT BUSHING UMC RC PIVOT TUBE RHSNB 1/2-13X1 3/4 GR5 Used with long row unit next to fertilizer pump mount on 15" spacing. Used with long row unit next to fertilizer pump mount on 15" spacing. Shown 11/06/ p

86 Table of Contents Row Cleaner Unit Mount Assembly Part Number Index p /06/18

87 Table of Contents Part Number Index Opener Row Cleaner Unit Mount Assembly Ref. Part No. Part Description Comments Revision dwg D D D D H C C C C C C C C C C Image No. UMRC MOUNT ROUND TUBE ROW CLEANER PIVOT PIPE UMRC ADJUSTMENT TUBE SPACER UMRC MOUNT WELD RHSNB 1/2-13X1 1/2 GR5 HHCS 7/16-14X1 1/4 GR5 PLT NUT HEX 1/2-13 PLT WASHER LOCK 7/16 PLT WASHER LOCK SPRING 1/2 PLT PIN CLEVIS 3/8 X 3 PLT PARALLEL ARM PIVOT BUSHING PIN HAIR COTTER.092 WIRE RHSNB 1/2-13X5 GR5 NUT HEX FLG. LOCK 1/2-13 PLT. 11/06/ p

88 Row Pro Table of Contents Part Number Index p /06/18

89 Row Pro Table of Contents Part Number Index Opener Ref. Part No. Part Description Comments Revision dwg C D C D D D C C C C D D C D C C R R C C C C S C A C C C H C C C C D C C D C C C C C C D C C C R C C C C C C C C Image No. SNAP RING EXT 5/8.050 T BEAM PIVOT PIN CAST WALK BEAM SIDE STRAP STOP PIVOT CASTING MACHINED PLANTER HANDLE SPRING COMP.72 X 1.5 X.072WD WASHER 3/4 X 17/32 X 18 GA PLT PIN COTTER 3/32 X 1 LONG MS FC23 LOAD CELL PIVOT PIN 20 SER OPNR CAM PIN PIN CLVS.38X2.77 USBL 3/8 ID X 5/8 OD X.125 SPCR 2"DIA X 3.25" STROKE DA CYL ELBOW PTC 1/4 X 1/4MNPT TUBING NYLON 1/4OD X.17ID GRN TUBING NYLON 1/4OD X.17ID RED TE POLY 1/4 PUSH LOCK 11' EXTENSION HARNESS 8' EXTENSION HARNESS FUSE ASSEMBLY DJ DWN PRESSURE I/O MODULE A/S DJ HARNESS, DOWN PRESSURE EXT 4 PIN MP 4' ROW PRO ROW PRO MAIN VALVE KIT NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1/2 SAE PLT 12V COMP MOUNT WELDMENT U-BOLT 1/2-13 X 6 1/32 X 7 1/4 NUT HEX 3/8-16 PLT WASHER LOCK SPRING 3/8 PLT HHCS 3/8-16X3/4 GR5 RP COMPRESSOR COVER SIDE WASHER FLAT 3/8 SAE PLT HOSE CLIP 5/8 I.D. 12 COMPRESSOR COVER TOP PRESSURE SWITCH, 135PSIF TEE 1/4NPT BRASS FXMXF RPBY C WASHER FLAT #10 SAE PLT WASHER LOCK #10 NUT HEX PLT COMPRESSOR MOUNT 12V AIR COMPRESSOR PTFE HOSE ASM - 1/4 X 36 AD 1/2MNPT X 1/2 BARB BRASS TUBING 5/8 OD X.5OD BLK NYLON AD 1/2FNPT X 1/2 BARB BRASS SCREW RD HD X 1 1/4 PLT NUT HEX PLT GROMMET,.75IDX1.25ODX.063 ELECTRONIC UNLOADER VALVE PL 1/8MNPT NUT HEX WHIZ M12X1.75 AD 1/8MNPT X 3/8 TUBE PTC 11/06/ p

90 Table of Contents Row Pro (continued) Part Number Index Ref Part No R C C C C C C C D C C D C C C C C C C C Part Description TUBING 3/8 X.275 BLK NYLON AD 1/4MNPT X 3/8OD TUBE PTC MAC DA SOLENOID VALVE ASM 1/4 PIPE BULKHEAD FITTING CHECK VALVE AD 3/8 TUBE X 3/8 TUBE PTC AD PUSH 1/4TUBEX1/4MNPT CP 1/4 PUSH LOK POLY AIR TANK MOUNT AD 3/8MNPT X 3/8OD TUBE PTC TANK AIR 1488 CU IN MODULE MOUNT 3/4 MNPT X 1/4 FNPT BUSHING 2 1/2" PRESSURE GAUGE 160 PSI AD 3/8MNPT 1/4FNPT PETCOCK 1/4 BRASS RELIEF VALVE NUT HEX 1/4-20 PLT WASHER LOCK SPRING 1/4 PLT HSHCS 1/4-20X1 1/2 Comments Revision p /06/18

91 Table of Contents Part Number Index Opener Row Pro (continued) This Page Intentionally Left Blank 11/06/ p

92 Table of Contents Part Number Index 25 Series Side Depth Wheel Scraper Assembly p /06/18

93 Table of Contents Part Number Index Opener 25 Series Side Depth Wheel Scraper Assembly Ref. Part No. Part Description Comments Revision dwg C D D D C C Image No. HHCS 1/2-13X3 1/4 GR5 2.5" GAUGE WHEEL SCRAPER 4" GAUGE WHEEL SCRAPER 3" GAUGE WHEEL SCRAPER WASHER FLAT 1/2 SAE PLT NUT HEX 1/2-13 PLT Shown 11/06/ p

94 Table of Contents Unit Mount Coulter Part Number Index p /06/18

95 Table of Contents Part Number Index Opener Unit Mount Coulter Ref. Part No. Part Description Comments Revision dwg S H C C C C C C C C C C C Image No. GP25S NARROW HUB ASM UNIT MOUNTED COULTER MOUNT HHCS 5/8-11X4 GR5 RHSNB 1/2-13X1 1/2 GR5 NUT HEX 1/2-13 PLT NUT HEX 5/8-11 PLT WASHER LOCK SPRING 1/2 PLT WASHER LOCK SPRING 5/8 PLT DECAL GP PLANTING COMPONENTS COULTER BLADE-14 DIA STRAIGHT COULTER BLADE (TURBO) 15'" OD COULTER BLADE (FLUTED) 15'" OD NUT HEX FLANGE 1/2-13 GR G PLT Refer to "Hub Assembly ( C S)" for breakdown Used on Vlll ONLY Shown 11/06/ p

96 Table of Contents Hub Assembly ( C & S) Part Number Index p /06/18

97 Table of Contents Part Number Index Opener Hub Assembly ( C & S) Ref. Part No. Part Description Comments Revision dwg C CR C C C HU C C C HS C C D D C C C S C Image No. HHCS 5/8-11X1 1/2 GR5 MARTIN 3 LIP SEAL (JD AA26234) BEARING CONE L44643 BEARING CUP L44610 RHSNB 7/16-14X1 3/4 GR5 MARTIN HA13270 HUB HOUSING NUT HEX WHIZ 7/16-14 PLT WASHER FLAT 3/4 SAE PLT NUT HEX SLOTTED 3/4-16 MARTIN HUB CAP PIN COTTER 5/32 X 1 1/4 LG RHSNB 1/2-13X1 1/4 GR5 NARROW HUB BOLT SPACER NARROW COULTER HUB BRG 5206KPP IDX2.44 OD SNAP RING INT 2.44 OD.078W HHCS 5/8-11X1 1/2 GR5 GP25S NARROW HUB ASM ROW CLEANER HUB ASM Includes items Includes items /06/ p

98 Table of Contents Press Wheel 12-12, 1.25 X 13.5 Part Number Index p /06/18

99 Table of Contents Part Number Index Press Wheels Press Wheel 12-12, 1.25 X 13.5 Ref. Part No. Part Description Comments Revision dwg68885 dwg H H H H C C C C C C D D C C C C H H D D C C C C C C C C C C C C C C D D C C C C H H C C C C H H C C Image No. Image No. 25P MID PW MOUNT 25P MID PW MOUNT LONG PW MOUNT LONG PW MOUNT PARALLEL ARM PIVOT BUSHING PARALLEL ARM PIVOT BUSHING PIN CLEVIS 5/8 X 3 1/4 PIN CLEVIS 5/8 X 3 1/4 PIN COTTER 1/8 X 1 PIN COTTER 1/8 X 1 SPRING ALIGNMENT BUSHING SPRING ALIGNMENT BUSHING SPRING 1.8 OC X 11 LG SPRING 1.8 OC X 11 LG NUT HEX FLG LOCK 1/2-13 PLT NUT HEX FLG LOCK 1/2-13 PLT 25 SER 12 DEG STAG PW ARM WLD 25 SER 12 DEG STAG PW ARM WLD PRESS WHEEL PVT MNT TUBE PRESS WHEEL PVT MNT TUBE HHCS 1/2-13X4 1/2 GR5 HHCS 1/2-13X4 1/2 GR5 PRESS WHEEL SPRING ADJ HANDLE PRESS WHEEL SPRING ADJ HANDLE WASHER FLAT 1/2 HARD ASTMF436 WASHER FLAT 1/2 HARD ASTMF436 PIN CLEVIS 7/16 X 1 1/2 PIN CLEVIS 7/16 X 1 1/ X 13.5 WEDGE HD PW ASSY 1.25 X 13.5 WEDGE HD PW ASSY HHCS 1/2-13X1 3/4 GR5 HHCS 1/2-13X1 3/4 GR5 1 X 12 PRESS WHL ASSY-5203BRG 1 X 12 PRESS WHL ASSY-5203BRG 1/4 PW SPACER 5/8 DIA 1/4 PW SPACER 5/8 DIA WASHER LOCK SPRING 5/8 PLT WASHER LOCK SPRING 5/8 PLT HHCS 5/8-11X3 1/4 GR5 HHCS 5/8-11X3 1/4 GR5 LH DRIBBLER TUBE LH DRIBBLER TUBE WASHER LOCK SPRING 5/16 PLT WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT NUT HEX 5/16-18 PLT RH DRIBBLER TUBE RH DRIBBLER TUBE RHSNB 5/16-18X3/4 GR5 RHSNB 5/16-18X3/4 GR5 Refer to Press Wheel Breakdown for breakdown. Refer to Press Wheel Breakdown for breakdown. Refer to Press Wheel Breakdown for breakdown. Refer to Press Wheel Breakdown for breakdown. 11/06/ p

100 Table of Contents Part Number Index Press Wheel Assembly with Spider Wheels p /06/18

101 Table of Contents Part Number Index Press Wheels Press Wheel Assembly with Spider Wheels Ref. Part No. Part Description Comments Revision dwg C C D D C C C C C D H C C S S C C C H C C C C C D D C C C H H H Image No. HHCS 3/8-16X1 1/4 GR5 WASHER LOCK SPRING 3/8 PLT DRAG CHAIN BACKUP PLATE PLANTER DRAG CHAIN MOUNT HHCS 7/16-14X1 1/2 GR5 TWIST LINK DRAG CHAIN 16 PITCH NUT HEX FLANGE LOC 7/16-14 PLT HHCS 5/8-11X3 1/4 GR5 WASHER LOCK SPRING 5/8 PLT 1/4 PW SPACER 5/8 DIA LH 45 DEG TOOTH CLOSING WHEEL BRG.63ID PRESS WHL ASY SNAP RING INT 40 MM LH 45 DEG TOOTH WHEEL ASM RH 45 DEG TOOTH WHEEL ASM WASHER FLAT 5/8 SAE PLT HHCS 1/2-13X1 3/4 GR5 WASHER FLAT 1/2 HARD ASTMF SER 12 DEG STAG PW ARM WLD NUT HEX FLG LOCK 1/2-13 PLT PIN COTTER 1/8 X 1 PIN CLEVIS 7/16 X 1 1/2 PRESS WHEEL SPRING ADJ HANDLE HHCS 1/2-13X4 1/2 GR5 PRESS WHEEL PVT MNT TUBE SPRING ALIGNMENT BUSHING PIN CLEVIS 5/8 X 3 1/4 PARALLEL ARM PIVOT BUSHING SPRING 1.8 OC X 11 LG 25P MID PW MOUNT LONG PW MOUNT RH 45 DEG TOOTH CLOSING WHEEL Left Hand, Includes items: Right Hand, Includes items: 12, 13 & 31 11/06/ p

102 Table of Contents Press Wheel Breakdown Part Number Index p /06/18

103 Table of Contents Part Number Index Press Wheels Press Wheel Breakdown Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C Image No X 13.5 WEDGE HD PW ASSY HHCS 1/4-20X1 GR5 1 X 12 PRESS WHEEL RIM HALF BEARING PRESS WHEEL ASSEMBLY 1.25 X 13.5 PRESS WHEEL TIRE NUT HEX LOCK 1/4-20 FLG 1 X 12 PRESS WHL ASSY-5203BRG TIRE RUBBER 1 X 12 1 X 12 HD PRESS WHEEL RIM HALF 11/06/ p

104 Table of Contents Closing Wheel Drop mount Part Number Index p /06/18

105 Table of Contents Part Number Index Press Wheels Closing Wheel Drop mount Ref. Part No. Part Description Comments Revision dwg D D D C C C H C C Image No. RH CLOSING WHEEL DROP PLATE LH CLOSING WHEEL DROP PLATE PLATE 1X10 OFFSET TO 25P HHCS 5/8-11X1 1/2 GR5 NUT HEX 5/8-11 PLT WASHER LOCK SPRING 5/8 PLT SPACER WELDMENT WASHER LOCK SPRING 3/8 PLT HHCS 3/8-16X1 1/2 GR5 11/06/ p

106 Fold Hydraulics Table of Contents Part Number Index p /06/18

107 Fold Hydraulics Table of Contents Part Number Index Hydraulics Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C D C C C C C C C C C Image No. EL 3/4MORB 9/16MJIC CYL REP 4.25X27.75X2.00 TIE HH3/8R /16FJIC HH3/8R /16FJIC HH3/8R /16FJIC AD 9/16MJIC 3/4MORB NC POPPET SOLENOID VALVE AD 3/4MORB CYL REP 4.75X20.0X1.75 (RET) ORIFICE PLATE 1/16 3/4 HH3/8R /16FJIC EL 9/16MJIC 9/16FJIC TE 9/16MJIC 3/4MORB 9/16MJIC HH1/2R /4MORB 3/4FJIC HH1/4R /16FJIC FOLD DELIVERY HYDRAULIC VALVE HH3/8R /16FJIC TE 3/4MJIC 3/4MJIC 3/4FJIC EL 45 3/4MORB 3/4MJIC 11/06/ p

108 Table of Contents Lift and Marker Hydraulics Part Number Index p /06/18

109 Table of Contents Part Number Index Hydraulics Lift and Marker Hydraulics Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C C C C C C C C C C C C C C C C C C Image No. CYL 3X24X1.50 ROD (TIE ROD) EL 9/16MJIC 9/16MORB HH3/8R /16FJIC HH3/8R /16FJIC HH3/8R /4FJIC TE 9/16MJIC 3/4MORB 9/16MJIC CYL REP 4.50X10.37X1.5 ROD TIE HH1/2R /4FJIC HH3/8R /16FJIC CYL REP 5X10X2.0 ROD (TIE) HH1/2R /4FJIC TE 3/4MORB 3/4MJIC 3/4MJIC AD 3/4FJIC 9/16MORB HH3/8R /16FJIC EL 3/4MJIC 9/16MORB COUNTERBALANCE VALVE 10:1 SUN HH1/4R /16FJIC HH1/4R /16FJIC HH1/2R /4MORB 3/4FJIC HH3/8R /16FJIC HH3/8R /16FJIC HH3/8R /16FJIC SINGLE SELECTOR VALVE EL 3/4MORB 9/16MJIC HH3/8R /16FJIC HH3/8R /16FJIC 9/16MJIC HH3/8R /4FJIC 9/16FJIC 11/06/ p

110 Fan Hydraulics Table of Contents Part Number Index p /06/18

111 Fan Hydraulics Table of Contents Part Number Index Hydraulics Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C C C C C C C C C C C C Image No. HH5/8R /8FJIC HH3/8R /16FJIC HH3/8R /16FJIC TE 9/16MJIC 9/16MJIC 9/16FJIC EL 9/16MJIC 9/16MORB EL 3/4FJIC 3/4MJIC TE 3/4MJIC AD 3/4MORB 3/4FJIC AD 1 1/16MORB 3/4FORB EL 3/4FJIC 3/4MORB VALVE LINE CHECK HH1/2R /4FJIC 3/4MORB HH1/2R /4FJIC TE 3/4MORB 3/4MJIC 3/4MJIC HH1/2R /8FJIC 3/4FJIC FOLD DELIVERY HYDRAULIC VALVE TE 1 1/16MORB 7/8MJIC 7/8MJIC AD 9/16MORB 9/16MJIC HH1/2R /4FJIC EL 45 3/4MORB 3/4MJIC HH1/2R /4FJIC 11/06/ p

112 Table of Contents Hydraulic Hose Grips Part Number Index p /06/18

113 Table of Contents Part Number Index Hydraulics Hydraulic Hose Grips Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C C C C Image No. HG HANDLE - BLACK EXT HG HANDLE - RED EXT HG HANDLE - GREEN EXT HG HANDLE - YELLOW EXT HG HANDLE - GRAY EXT HG HANDLE - BLUE EXT HG HANDLE - BLACK RET HG HANDLE - RED RET HG HANDLE - GREEN RET HG HANDLE - YELLOW RET HG HANDLE - GRAY RET HG HANDLE - BLUE RET AD 3/4MORB 3/4FORB (HG) Used on frame lift cylinders. Used on hydraulic level Used on wing fold cylinders Used on Hydraulic Drive. Used on fold cylinders. Used on cast roller depth control. Used on frame lift cylinders. Used on hydraulic level. Used on wing fold cylinders. Used on Hydraulic Drive. Used on fold cylinders. Used on cast roller depth control 11/06/ p

114 Table of Contents Part Number Index Hydraulic Cylinder ( C 4.75x20x1.75 Rod) p /06/18

115 Table of Contents Part Number Index Hydraulics Hydraulic Cylinder ( C 4.75x20x1.75 Rod) Ref. Part No. Part Description Comments Revision dwg M7021-ADI 2S8790NC 3R8712 4R8110 5R8528 6R8162-ADI 7M8328 2A C C C C C 2A C Image No. MW ROD CLEVIS 1.00PN THD MIDWAY NICKEL/CHROME ROD MIDWAY HEAD MIDWAY PISTON MIDWAY TUBE MIDWAY ADI BASE TIE ROD MIDWAY MW WIPER U-CUP 0-RING BACK-UP MIDWAY TEFLON SEAL O-RING LOADER MIDWAY WEAR RING MIDWAY MW O-RING MW PISTON NUT 1 1/4"-12 UNF NUT HEX 3/4-16 PLAIN NUT HEX 3/8-16 PLAIN HHCS 3/8-16X1 3/4 GR5 PIN CLEVIS 1 X 3 11/16 GR5 PLT BUSHING HARDENED 1 1/4-1-3/4 L MW COTTER PIN SEAL KIT MW C 4A8105 Only available in item 23 Only available in item 23 Only available in item 23 Only available in item 23 Only available in item 23 Only available in item 23 Only available in item 23 Only available in item 23 NOT used with ADI clevis 11/06/ p

116 Table of Contents Part Number Index Hydraulic Cylinder ( C 4.5 x x 1.5 Rod) p /06/18

117 Table of Contents Part Number Index Hydraulics Hydraulic Cylinder ( C 4.5 x x 1.5 Rod) Ref. Part No. Part Description Comments Revision dwg M7022-ADI 2S7579NC 3R7540 4R7109 5R7192 6R7190-ADI 7M7422 2A C C C C Image No. MW ROD CLEVIS 1.25PN THD MW ROD MW HEAD PISTON MIDWAY MW TUBE MIDWAY ADI BASE MW TIE ROD MW WIPER MW U-CUP MW O-RING MW BACK-UP PISTON SEAL LOADER WEAR RING MIDWAY MW O-RING MW PISTON NUT 1 1/4"-12 UNF NUT HEX 3/4-16 PLAIN NUT HEX 3/8-16 PLAIN HHCS 3/8-16X1 3/4 GR5 SEAL KIT MW 4.5 RPHCYL 4A7104 Only available in item 20 Only available in item 20 Only available in item 20 Only available in item 20 Only available in item 20 Only available in item 20 Only available in item 20 Only available in item 20 11/06/ p

118 Table of Contents Part Number Index Hydraulic Cylinder ( C 5.0 x 10 x 2.0 Rod) p /06/18

119 Table of Contents Part Number Index Hydraulics Hydraulic Cylinder ( C 5.0 x 10 x 2.0 Rod) Ref. Part No. Part Description Comments Revision dwg M7022-ADI 2S8614NC 3R9640 4R9110 5R9118 6R9170-ADI 7M8318 2A C C C C Image No. MW ROD CLEVIS 1.25PN THD MW ROD MW HEAD PISTON MIDWAY MIDWAY TUBE MIDWAY ADI BASE MIDWAY TIE ROD F/ 4 3/4 X 10 MW WIPER MW U-CUP MW O-RING MW BACK-UP PISTON SEAL LOADER WEAR RING MIDWAY MW O-RING MW PISTON NUT 1 1/4"-12 UNF NUT HEX 3/4-16 PLAIN NUT HEX 3/8-16 PLAIN HHCS 3/8-16X1 3/4 GR5 SEAL KIT MW (4A9106) Only available in item 20 Only available in item 20 Only available in item 20 Only available in item 20 Only available in item 20 Only available in item 20 Only available in item 20 Only available in item 20 11/06/ p

120 Table of Contents Hydraulic Cylinder ( C) Part Number Index p /06/18

121 Table of Contents Part Number Index Hydraulics Hydraulic Cylinder ( C) Ref. Part No. Part Description Comments Revision dwg M7021-ADI 2S7693NC 3R7040 4R6113 5R6181 6R6182-ADI 7M7386 2A C C C 2A0209 2A C Image No. MW ROD CLEVIS 1.00PN THD MW ROD MIDWAY HEAD MW PISTON MIDWAY TUBE MW BASE MIDWAY TIE ROD MW WIPER SEAL KIT MW 4.5 CYL 5A7116 BACK UP MIDWAY O-RING MIDWAY MW PISTON SEAL MW LOADER WEAR RING MIDWAY SEAL KIT MW 4.5 CYL 5A7116 MW PISTON NUT 1 1/4"-12 UNF NUT HEX 3/4-16 PLAIN NUT HEX 3/8-16 PLAIN HHCS 3/8-16X1 3/4 GR5 MW PIN CLEVIS BASE END MW COTTER PIN SEAL KIT MW C 4A6106 Only available in item 22 Only available in item 22 Only available in item 22 Only available in item 22 Only available in item 22 Only available in item 22 Only available in item 22 Only available in item 22 11/06/ p

122 Table of Contents Part Number Index Hydraulic Cylinder C (3 x 24 x 1.5 Rod) p /06/18

123 Table of Contents Part Number Index Hydraulics Hydraulic Cylinder C (3 x 24 x 1.5 Rod) Ref. Part No. Part Description Comments Revision dwg M7016-ADI 2M4532NC 3R1512 4M4108 5M4132 6R1164-ADI 7M C 2A0024 2A0014 2A C 2A C Image No. MIDWAY HARDENED CLEVIS ADI MW NICKEL/CHROME ROD MIDWAY HEAD MW PISTON MW TUBE MIDWAY ADI BASE TIE ROD PIN CLEVIS 1 X 3 11/16 GR5 PLT MW WIPER U-CUP O-RING MIDWAY BACK-UP MIDWAY TEFLON SEAL MW PISTON NUT SEAL MW PISTON NUT 1-14 MW TIE ROD NUT RPBY C HHCS 3/8-16X1 3/4 GR5 MW COTTER PIN SEAL KIT MW 3 CYL 5A4106 Only available in item #20 Only available in item #20 Only available in item #20 Only available in item #20 Only available in item #20 Only available in item #20 11/06/ p

124 Hitch Hydraulics Table of Contents Part Number Index p /06/18

125 Table of Contents Part Number Index Hydraulics Hitch Hydraulics Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C C C C Image No. AD 3/4FORB 3/4FORB HH5/8R /4MORB AD 3/4MORB 3/4FJIC EL 7/8MORB 3/4MJIC YP HYD HITCH VALVE EL 3/4MORB 9/16MJIC HH3/8R /16FJIC HH3/8R /4MORB CYL 3.5X16X1.75 ROD(TIE)NOPINS WASHER LOCK SPRING 5/16 PLT HHCS 5/16-24X1 GR5 HH5/8R /4FJIC 3/4MORB HH1/2R /4MORB 11/06/ p

126 Decals Table of Contents Part Number Index p /06/18