Parts Manual FCA Field Cultivator Air Drill. Copyright 2018 Printed 06/13/ P

Transcription

1 Table of Contents Part Number Index Parts Manual Field Cultivator Air Drill FCA Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! Cover illustration may show optional equipment not supplied with standard unit. Copyright 2018 Printed 06/13/ P

2 Table of Contents Table of Contents Part Number Index Section 1: Introduction...4 Using This Manual...4 Manual Replacement Information...4 Manual Revisions...4 Touch-up Paint...4 Hardware Legend...5 Replacement Hardware...5 Serial Numbers...5 Part Number Service Coding...5 Section 2: Frames...6 Hitch Assembly (Cultivator to Seeder)...6 Center Frame Assembly...8 Torque Tube & Level Bar...10 Center Fold Assembly...12 Inside Wing Assembly...14 Wing Fold Assembly...16 Outside Wing Assembly...18 Seed Manifold Hitch Assembly...20 Seed Manifold Wing Assembly...22 Lights...24 Weight Package...26 Section 3: Transport...28 Center Walking Beams...28 Inside Wing Walking Beam...30 Outside Wing Walking Beam...32 Gauge Wheel Assembly (Caster Style)...34 Slide In Hubs & Spindles...36 Section 4: Hydraulics...38 Depth Control Assembly...38 Hydraulic Lift Layout...40 Hydraulic Fold Layout...42 Opener Hydraulics (Front)...44 Opener Hydraulics (Rear)...46 Wing Fold & Tower Retract Hydraulic Assembly...48 Hydraulic Cylinder ( C 4X8X1.38 Rod)...50 Hydraulic Cylinder ( C 4.5X8X1.5 Rod)...52 Hydraulic Cylinder ( C 1.50X4.0X.75 Rod)...54 Hydraulic Cylinder ( C 4.25X8X1.50 Rod)...56 Hydraulic Cylinder ( C 4.5X30X1.5 Rod)...58 Hydraulic Cylinder ( C 4X14X1.25 Rod)...60 Hydraulic Cylinder ( C 2.5X6X1.125 Rod)...62 Section 5: Shanks...64 K-Flex Shank Assembly...64 Magnum Shanks...66 Section 6: Towers & 12 Outlet Towers...68 Tower Retract Bracket...70 Tower Wiring Assembly...72 Section 7: Openers...74 Opener Mounts...74 FCA Openers...78 Section 8: Decals...81 Decals...82 Section 9: Attachments...84 Reel Assembly...84 Part Number Index...86 Copyright 2018 All rights reserved Printed 06/13/18 Great Plains Manufacturing, Inc. provides this publication as is without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. Great Plains Manufacturing, Incorporated Trademarks The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains All other brands and product names are trademarks or registered trademarks of their respective holders. Printed in the United States of America P /13/18

3 Table of Contents Part Number Index Alphabetized Table of Contents Selected Models 9 9 & 12 Outlet Towers...68 C Center Fold Assembly...12 Center Frame Assembly...8 Center Walking Beams...28 D Decals...82 Depth Control Assembly...38 F FCA Openers...78 S Seed Manifold Hitch Assembly...20 Seed Manifold Wing Assembly...22 Slide In Hubs & Spindles...36 T Torque Tube & Level Bar...10 Tower Retract Bracket...70 Tower Wiring Assembly...72 W Weight Package...26 Wing Fold & Tower Retract Hydraulic Assembly...48 Wing Fold Assembly...16 G Gauge Wheel Assembly (Caster Style)...34 H Hitch Assembly (Cultivator to Seeder)...6 Hydraulic Cylinder ( C 4X8X1.38 Rod)...50 Hydraulic Cylinder ( C 4.5X8X1.5 Rod)...52 Hydraulic Cylinder ( C 1.50X4.0X.75 Rod)...54 Hydraulic Cylinder ( C 4.25X8X1.50 Rod)...56 Hydraulic Cylinder ( C 4.5X30X1.5 Rod)...58 Hydraulic Cylinder ( C 4X14X1.25 Rod)...60 Hydraulic Cylinder ( C 2.5X6X1.125 Rod)...62 Hydraulic Fold Layout...42 Hydraulic Lift Layout...40 I Inside Wing Assembly...14 Inside Wing Walking Beam...30 K K-Flex Shank Assembly...64 L Lights...24 M Magnum Shanks...66 O Opener Hydraulics (Front)...44 Opener Hydraulics (Rear)...46 Opener Mounts...74 Outside Wing Assembly...18 Outside Wing Walking Beam...32 R Reel Assembly /13/ P

4 Table of Contents P Part Number Index -4-06/13/18

5 Table of Contents Part Number Index 06/13/ P

6 Table of Contents Hitch Assembly (Cultivator to Seeder) Part Number Index P /13/18

7 Table of Contents Part Number Index Section 2: Frames Hitch Assembly (Cultivator to Seeder) Ref. Part No. Part Description Comments Revision dwg H C C C C D C C D C C C D C C C C C C C C C C C C C PPI-203VR PPI-205H PPI-302V C V Image No. WIDE FLOATING HITCH TONGUE HHCS 1 1/4-7X7 GR8 PLT WASHER FLAT 1 1/4 USS PLT NUT HEX TOP LOCK 1 1/4-7 PLT SQUARE SCREW JACK 5000LBS. SAFETY CHAIN SUPPORT HITCH BASE - CAT III & IV CAT V PERFECT HITCH 1"X7" GRADE 8 SPECIAL THREAD WASHER LOCK SPRING 1 PLT NUT HEX 1-8 PLT HHCS 7/8-9X3 GR5 SAFETY CHAIN LB WASHER FLAT 7/8 USS PLT WASHER LOCK SPRING 7/8 PLT NUT HEX 7/8-9 PLT HITCH CLEVIS W/BOLT SPRING HOSE LOOP HEAVY HHCS 1/2-13X1 GR5 WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1/2 USS PLT MANUAL PAK 1" W/GASKET SCREW PAN HD 1/4-20 X 3/4 MINI END WHEEL PRESS WHEEL WASHER LOCK SPRING 1/4 PLT NUT-HEX 1/4-20 PLT V-BLOCK CUSHION TOP PLATE - CAT 3 HHCS 3/4-10X3 GR5 HITCH TONGUE CAT III ASSEMBLY Do not use if Tractor drawbar has hammer strap. Will not work with Cat V. Includes items 7, /13/ P

8 Table of Contents Center Frame Assembly Part Number Index P /13/18

9 Table of Contents Part Number Index Section 2: Frames Center Frame Assembly Ref. Part No. Part Description Comments Revision dwg H H C C C H C C C D C C C C D C C C C D C C C C C H H S C C C H H C Image No. FCA4500 CENTERFRAME WIDE CENTER BRACE BAR FLOATING HHCS 3/4-10X2 GR5 WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT CENTER FRAME TRUSS FLOATING HHCS 5/8-11X1 1/2 GR5 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT TRNBCKLE WRENCH 2 5/ /16 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT U-BOLT 1/2-13X4 1/32X4 PLASTIC END CAP - 4X3X1/4 TUBE HYD HOSE CLAMP BRACKET HHCS 5/16-18X5/8 HHCS 5/16-18X1 1/4 GR5 HHCS 5/16-18X2 GR5 WASHER LOCK SPRING 5/16 PLT FLAT - 1/4 X 2, SMV POST DECAL SLOW MOVING-GALV. BACKED SCREW PAN HD 1/4-20 X 3/4 WASHER LOCK SPRING 1/4 PLT NUT-HEX 1/4-20 PLT U-BOLT 5/8-11X4 1/32 X 4 1/4 11" U-BOLT ON STUB (4X3 TUBE) 5" U-BOLT ON STUB (4X3 TUBE) DJ SWITCH SPDT W/WISKER & WIRE NUT HEX 6-32 SS WASHER LOCK #6 SS WASHER FLAT #6 SAE PLT BOLT ON STUB BOLT ON STUB U-BOLT 5/8-11 X 5 1/32 X 4 3/4 Single set of Hoses Double set of Hoses Triple set of Hoses Used on Left Side Used on Right Side 06/13/ P

10 Table of Contents Torque Tube & Level Bar Part Number Index P /13/18

11 Table of Contents Part Number Index Section 2: Frames Torque Tube & Level Bar Ref. Part No. Part Description Comments Revision dwg H C C C H H C C C C H D D D C C C C D D C C H C C C C C C Image No. CENTER TORQUE TUBE PIN HINGE 1 1/4X6 HRDN PLT HHCS 3/8-16X2 1/4 GR8 SP THD NUT HEX TOP LOCK 3/8-16 PLT LEVEL BAR FLOATING RH WIDE LEVEL BAR FLOATING LH WIDE BUSHING CYL 1 1/4 X 1 X 1 HHCS 1-8X6 GR8 PLT SPTHD HHB 1-8X6 GR8 PLT SPTHD NUT HEX TOP LOCK 1-8 PLT LEVEL BAR LINK WELDMENT LEVELING LINK LEVELING LINK 1"X7" GRADE 8 SPECIAL THREAD CYL REP 4.5X8X1.5 ROD (TIE) NPN PIN CLEVIS 1 X 3 1/8 USABLE WASHER MACH 1.5X1.00X.075 PIN COTTER 3/16 X 2 LIFT PIN 1 X 11 1/2 BAR RND - 1 1/4 THREAD NUT HEX SLOTTED 1 1/4-7 PIN ROLL 3/16 X 1 3/4 PLT. LEVEL BAR CROSSTUBE HHCS 1/2-13X1 1/2 GR5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT PIN HTCH 1X4 1/2 USLB W/KEEPER HHCS 1-8X9 GR8 PLT WASHER FLAT 1 1/4 USS PLT Replaced by C 06/13/ P

12 Table of Contents Center Fold Assembly Part Number Index P /13/18

13 Table of Contents Part Number Index Section 2: Frames Center Fold Assembly Ref. Part No. Part Description Comments Revision dwg H C C C C H H C Image No. CENTER WING STOP HHCS 5/8-11X1 1/2 GR5 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT U-BOLT 5/8-11 X 3 1/32 X 6 1/2 CENTER FOLD BRACKET - REAR WID CENTER FOLD BRACKET - FRONT WI PIN HITCH 1/2X4 1/2 W/KEEPER 06/13/ P

14 Table of Contents Inside Wing Assembly Part Number Index P /13/18

15 Table of Contents Part Number Index Section 2: Frames Inside Wing Assembly Ref. Part No. Part Description Comments Revision dwg H H C C C C C H H C C C H H C C C C H C C C C H H S S C C C C D D C H H H C C S C H H H H C C C H C C C Image No. FCA ' INSIDE WING RH FCA ' INSIDE WING LH SLEEVE BEARING 1 1/4 I.D. HINGE PIN - 1 1/4 OD X 6 1/4 L PIN SPIROL 3/8 X 2 1/2 PLATED WASHER FLAT 1 SAE NUT HEX TOP LOCK 1-8 PLT 10FT WING BRACE FLOATING RH 10FT WING BRACE FLOATING LH HHCS 3/4-10X2 GR5 WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT WING WHEEL ARM RH FLOATING WING WHEEL ARM LH FLOATING BUSHING CYL 1 1/4 X 1 X 1 PIN HINGE 1 1/4X6 HRDN PLT HHCS 3/8-16X2 1/4 GR8 SP THD NUT HEX TOP LOCK 3/8-16 PLT 12" OFFSET STUB U-BOLT 5/8-11X4 1/32X4 1/4 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT HHCS 5/8-11X1 1/2 GR5 WING TRUSS RH WING TRUSS LH LH WING PULL BAR ASSY RH WING PULL BAR ASSY PIN CLEVIS 1 X 3 1/8 USABLE WASHER MACH 1.5X1.00X.075 PIN COTTER 3/16 X 2 CYL REP 4.25X8X1.25 TIE 3000# LEVELING LINK 1" X 7" GRADE 8 SPECIAL THREAD HHCS 1-8X10 GR8 PLT LH WING PULL BAR RH WING PULL BAR TURNBUCKLE SWIVEL NUT HEX JAM 1 1/2-6 PLT GREASE ZERK 1/4-28 THD FORMING TURNBUCKLE ASSEMBLY PIN CLVS 1.0X3.38 USBL TURNBUCKLE CLVS END 1 1/2-LH TURNBUCKLE TUBE WELDMENT TURNBUCKLE CLVS END 1 1/2-RH WING LOCK MOUNT U-BOLT 1/2-13X3 1/32X5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT AUTOMATIC WING LATCH WASHER FLAT 3/4 USS PLT HHCS 3/4-10X4 1/2 GR 5 NUT LOCK 3/4-10 PLT Shown Shown Shown Shown Shown Includes items Includes items 32, /13/ P

16 Table of Contents Wing Fold Assembly Part Number Index P /13/18

17 Table of Contents Part Number Index Section 2: Frames Wing Fold Assembly Ref. Part No. Part Description Comments Revision dwg H H C C C C C C C C C C C D C C H C C C H C C C H C H D C H C Image No. REAR FOLD BKT FRONT FOLD BKT U-BOLT 5/8-11 X 3 1/32 X 5 1/2 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT HHCS 3/4-10X5 GR5 WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT HHCS 3/4-10X5 1/2 GR5 CYL 4.5X30X1.5 TIE CL PIN CLEVIS 1 X 3 1/8 USABLE WASHER MACH 1.5X1.00X.075 PIN COTTER 3/16 X 2 1"X7"GRADE 8 SPECIALTHREAD WASHER FLAT 1 USS PLT NUT HEX TOP LOCK 1-8 PLT WING LOCK MOUNT U-BOLT 1/2-13X3 1/32X5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT AUTOMATIC WING LATCH WASHER FLAT 3/4 USS PLT HHCS 3/4-10X4 1/2 GR5 NUT LOCK 3/4-10 PLT INSIDE WING HINGE HHCS 5/8-11X2 GR5 WING REST PLATE - WING REST HHCS 1/2-13X4 1/2 GR5 SENSOR BRACKET PROXIMITY SENSOR See Light Assembly page for Proximity Sensor part number Includes nuts to secure to bracket 06/13/ P

18 Table of Contents Outside Wing Assembly Part Number Index P /13/18

19 Table of Contents Part Number Index Section 2: Frames Outside Wing Assembly Ref. Part No. Part Description Comments Revision dwg H H H H D C C C C C D H C S S S C C H H C C C C C C C C C C C C C C C D C D C D C H C C C H H C H H H H Image No. LH OUTSIDE WING RH OUTSIDE WING OUTSIDE WING BRACE LH OUTSIDE WING BRACE RH PLATE - TORCHED W/BUSHINGS HHCS 3/4-10X2 GR5 WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT U-BOLT 5/8-11 X 3 1/32 X 5 NUT HEX TOP LOCK 1-8 PLT 1"x7" GRADE 8 SPECIAL THREAD WING HINGE HHCS 1-8X5 1/2 GR5 WING PULL BAR ASSEMBLY RH WING PULL BAR ASSEMBLY LH TURNBUCKLE ASSEMBLY HHCS 1 1/4-7X8 GR8 PLT NUT HEX TOP LOCK 1 1/4-7 PLT WING WHEEL ARM RH FLOATING WING WHEEL ARM LH FLOATING BUSHING CYL 1 1/4 X 1 X 1 PIN HINGE 1 1/4X6 HRDN PLT HHCS 3/8-16X2 1/4 GR8 SP THD NUT HEX TOP LOCK 3/8-16 PLT WASHER LOCK SPRING 1 PLT NUT HEX 1-8 PLT HHCS 1 1/4-7X7 GR8 PLT HHCS 1-8X9 GR8 PLT WASHER MACH 1.5X1.00X.075 PIN COTTER 3/16 X 2 GREASE ZERK 1/4-28 THD FORMING NUT LOCK 5/8-11 PLT CYL REP 4X8X1.38 ROD TIE 3000# PIN CLEVIS 1 X 3 1/8 USABLE CYL 4X14X1.25 ROD (TIE ROD) LEVELING LINK PIN CLEVIS 1 X 3 3/8 USABLE PIN HINGE - 1 X 7 WASHER FLAT 1 USS PLT ROLLER - 1 3/4 OD PIN ROLL 3/8 X 2 PLT WING LOCK T-BRACKET U-BOLT 1/2-13X3 1/32X5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT TURNBUCKLE CLVS END 1 1/2-LH TURNBUCKLE TUBE WELDMENT NUT HEX JAM 1 1/2-6 PLT TURNBUCKLE CLVS END 1 1/2-RH INSIDE WING PULL BAR FLOAT RH INSIDE WING BAR FLOAT LH TURNBUCKLE SWIVEL Shown Shown Shown Includes items Shown 06/13/ P

20 Table of Contents Seed Manifold Hitch Assembly Part Number Index P /13/18

21 Table of Contents Part Number Index Section 2: Frames Seed Manifold Hitch Assembly Ref. Part No. Part Description Comments Revision dwg H C C C C C C C C H C Image No. SEED TUBE WLDMNT HITCH HHCS 1/2-13X10 GR5 HHCS 1/2-13X6 GR5 WASHER FLAT 1/2 SAE PLT WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13PLT HHCS 5/8-11X1 1/2 GR5 NUT HEX 5/8-11 PLT WASHER LOCK SPRING 5/8 PLT BOLT ON SEED TUBE WLEDMENT 2 1/2 AIR HOSE BAND CLAMP Used with Fertilizer Option Only Used with Fertilizer Option Only Used with Fertilizer Option Only Used with Fertilizer Option Only 06/13/ P

22 Table of Contents Seed Manifold Wing Assembly Part Number Index P /13/18

23 Table of Contents Part Number Index Section 2: Frames Seed Manifold Wing Assembly Ref. Part No. Part Description Comments Revision dwg43886 dwg H H C C C C C C C C Image No. Image No. SEED TUBE WLDMNT INSIDE WING SEED TUBE WLDMNT INSIDE WING U-BOLT 5/8-11X4 1/32X4 1/4 U-BOLT 5/8-11X4 1/32X4 1/4 WASHER LOCK SPRING 5/8 PLT WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT NUT HEX 5/8-11 PLT 2 1/2 AIR HOSE BAND CLAMP 2 1/2 AIR HOSE BAND CLAMP 06/13/ P

24 Lights Table of Contents Part Number Index P /13/18

25 Lights Table of Contents Part Number Index Section 2: Frames Ref. Part No. Part Description Comments Revision dwg H H D D D D C C C C C C C C C C C C C C C C C C C C C K Image No. LIGHT BKT - LH LIGHT BKT - RH LIGHT BKT - RH LIGHT BKT - LH LIGHT MOUNTING BRACKET SMV POST U-BOLT 1/2-13X4 1/32X4 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT DECAL SLOW MOVING-GALV. BACKED SCREW PAN HD 1/4-20 X 3/4 WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT U-BOLT 1/2-13 X 2 1/2 X 3 1/2 DECAL REFLECTOR AMBER 2X9 LIGHT RED LAMP - LED LIGHT AMBER LAMP - LED HHCS 1-20X1 1/4 GR5 WASHER FLAT 1/4 SAE PLT NUT LOCK 1/4-20 PLT FCA4500 FOLD ASSIST HARNESS NC POPPER SOLENOID VALVE LIGHT HARNSS LEAD W/ VALVE LED LIGHT HARNESS - FCA4500 LIGHT HRNSS ENHANCE MODULE LED DECAL REFLECTOR ORANGE 2X9 DECAL REFLECTOR RED 2X9 LIGHT KIT ADC2350 FOR FCA4500 For amber lights For amber lights For red lights For red lights Replaced by D & D Attaches to Proximity Sensors Should be placed toward the inside of the machine Should be placed toward the outside of the machine Used on the ADC2350 Only See Wing Fold Assy. For Fold sensor parts breakdown 06/13/ P

26 Weight Package Table of Contents Part Number Index P /13/18

27 Weight Package Table of Contents Part Number Index Section 2: Frames Ref. Part No. Part Description Comments Revision dwg D D D C C C C S H H C C C ImageNo. FLAT - 3/4 X 6 FLAT - 3/4 X 6 PART - WEIGHT BOX HHCS 3/4-10X10 1/2 GR5 WASHER FLAT 3/4 SAE PLT WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT 350LB WEIGHT PACK WEIGHT PACK BKT WEIGHT PACK BKT U-BOLT 1/2-13X4 1/32X4 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT Includes items 1-7 Uses 2 U-Bolts Uses 1 U-Bolt 06/13/ P

28 Table of Contents Center Walking Beams Part Number Index P /13/18

29 Table of Contents Part Number Index Section 3: Transport Center Walking Beams Ref. Part No. Part Description Comments Revision dwg D C C C C H H C C D C C C L L C C C C C C C C C Image No. PIVOT SPINDLE 3 X 10 1/2 SEAL OIL CR X2.75X.44 BRG CONE 2.16ID JLM BRG CUP 3.54OD JLM GREASE ZERK 1/4-28 THD FORMING LH WALKING BEAM RH WALKING BEAM BRG CUP 2.89ODX.58WD #LM BRG CONE 1.62IDX.78WD#LM HARDENED SPINDLE WASHER PIN COTTER 3/16 X 1 3/4 PLT NUT HEX SLOTTED 1-14 GREASE CAP X.38 WALKING BEAM ASSY RH WALKING BEAM ASSY LH HUB 8-BOLT SPINDLE 2.75X HHCS 1/2-13X4 1/2 GR5 NUT HEX TOP LOCK 1/2-13 PLT WHEEL 16.5X /8OFFST BKSN TIRE TITAN 340/60R16.5 TIRE ASY340/60R16.5 3/5OF BKSN NUT LUG 5/8-18 X 90 DEG PLT HHCS 5/16-18X4 GR8 PLT NUT HEX TOP LOCK 5/16-18 PLT Shown (Shown) Includes items 1-12 Includes items 17 & 18 06/13/ P

30 Table of Contents Inside Wing Walking Beam Part Number Index P /13/18

31 Table of Contents Part Number Index Section 3: Transport Inside Wing Walking Beam Ref. Part No. Part Description Comments Revision dwg D C C C C H C C C C C C C C C C C L C C C C C C H H Image No. PIVOT SPINDLE 2 X 8 1/16 SEAL (CR16286) SEAL SLEEVE (CR081071) INNER CONE, JL69349 INNER CUP JL69310 WALKING BEAM GREASE ZERK 1/4-28 THD FORMING BEARING CUP LM BEARING CONE LM WASHER SPINDLE - 7/8 NUT HEX SLOTTED 7/8-14 PLT PIN COTTER 5/32 X 1 1/2 LONG GREASE CAP 2.448X1.12X.25 HUB 6-BOLT SPINDLE 2X HUB 6-BOLT SPINDLE 2 X 17 Q783 PIN CLEVIS 5/16X2 13/16 USABLE PIN COTTER 1/8 X 1 WING WALKING BEAM HUB ASSY WHEEL 15X6 6 BOLT BUCKSKIN TIRE 9.5 L X 15 8 PLY TIRE/WHEEL 9.5LX15 8 PLY BKSN NUT LUG 9/16-18 X 90 PLT HHCS 5/16-18X4 GR8 PLT NUT HEX TOP LOCK 5/16-18 PLT WING WHEEL ARM LH FLOATING WING WHEEL ARM RH FLOATING See Hub & Spindle Assembly See Hub & Spindle Assembly Items 1 thru 17 Includes items 19 & 20 Shown 06/13/ P

32 Table of Contents Outside Wing Walking Beam Part Number Index P /13/18

33 Table of Contents Part Number Index Section 3: Transport Outside Wing Walking Beam Ref. Part No. Part Description Comments Revision dwg D C C C C H C C C C C C C C C C C L C C C C C C H H Image No. PIVOT SPINDLE 2 X 8 1/16 SEAL (CR16286) SEAL SLEEVE (CR081071) INNER CONE, JL69349 INNER CUP JL69310 WALKING BEAM GREASE ZERK 1/4-28 THD FORMING BEARING CUP LM BEARING CONE LM WASHER SPINDLE - 7/8 NUT HEX SLOTTED 7/8-14 PLT PIN COTTER 5/32 X 1 1/2 LONG GREASE CAP 2.448X1.12X.25 HUB 6-BOLT SPINDLE 2X HUB 6-BOLT SPINDLE 2 X 17 Q783 PIN CLEVIS 5/16X2 13/16 USABLE PIN COTTER 1/8 X 1 WING WALKING BEAM HUB ASSY WHEEL 15X6 6 BOLT BUCKSKIN TIRE 9.5 L X 15 8 PLY TIRE/WHEEL 9.5LX15 8 PLY BKSN NUT LUG 9/16-18 X 90 PLT HHCS 5/16-18X4 GR8 PLT NUT HEX TOP LOCK 5/16-18 PLT WING WHEEL ARM RH FLOATING WING WHEEL ARM LH FLOATING See Hub & Spindle Assembly See Hub & Spindle Assembly Items 1 thru 17 Includes items 19 & 20 Shown 06/13/ P

34 Table of Contents Gauge Wheel Assembly (Caster Style) Part Number Index P /13/18

35 Table of Contents Part Number Index Section 3: Transport Gauge Wheel Assembly (Caster Style) Ref. Part No. Part Description Comments Revision dwg H H H S C C C C C C C C C C D C H H H C H C C C C C C C C C H H C H S C Image No. GAUGE WHEEL ARM RH (BOTTOM) GAUGE WHEEL ARM LH (BOTTOM) FLOATING CASTER WHEEL ARM TOP TURNBUCKLE ASSY SLEEVE BEARING 1 I.D. BUSHING 1 1/4X1X1/2 HRD ST SLT GAUGE WHEEL PIN - 1 OD X 5 1/2 PIN ROLL 3/8 X 2 PLT WASHER FLAT 7/8 USS PLT NUT HEX LOCK 7/8-9 PLT PIN CLEVIS 1 X 3 1/4 USEABLE WASHER MACH 1.5X1.00X.075 PIN COTTER 3/16 X 2 BUSHING HARDENED 1 1/4-1-3/4 L GAUGE WHEEL PIVOT MOUNT SLEEVE BEARING 2 1/2 I.D. GAUGE WHEEL ARM GAUGE WHEEL ARM CASTER GAGE WHEEL TOP COLLAR SPRNG COM 1 13/16ODX3/8WX2 3/4 CASTER GAGE WHEEL SPRING COVER NUT HEX 1-8 PLT NUT HEX JAM 1-8 PLT HUB 6-BOLT SPINDLE 2X HHCS 5/16-18X3 GR5 NUT LOCK 5/16-18 PLT WHEEL 15X8 6 BOLT BUCKSKIN TIRE 11L-15SL 12 PLY TUBELESS TIRE/WHL 11LX15 12PLY 6BLT BKSN NUT LUG 9/16-18 X 90 PLT TURNBUCKLE CLEVIS END 1 1/2-RH TURNBUCKLE TUBE WELDMENT NUT HEX JAM 1 1/2-6 PLT TURNBUCKLE CLEVIS END 1 1/2-LH GAUGE WHEEL PIVOT W/BUSHING WASHER FLAT 1 USS PLT (shown) Includes items (shown) Mounted on Left Side. Mounted on Right Side. See hub & spindle assembly for parts. Includes items 25 & 26 Includes items /13/ P

36 Table of Contents Slide In Hubs & Spindles Part Number Index P /13/18

37 Table of Contents Part Number Index Section 3: Transport Slide In Hubs & Spindles Ref. Part No. Part Description Comments Revision dwg D C C C C C C D C C C C C C D C C C C C C C C C C C C C D C D C Image No. AXLE SPINDLE 2 3/4X17 (Q60-8) SEAL GREASE 2.75X3.750X0.300 BRG CONE 2.16ID JLM BRG CUP 3.54OD JLM HUB 890W/CUPS 6-BOLT 6" BC BRG CUP 2.89ODX.58WD #LM BRG CONE 1.62IDX.78WD#LM HARDENED SPINDLE WASHER NUT HEX SLOTTED 1-14 PIN COTTER 3/16 X 1 3/4 PLT GREASE CAP X.38 HUB STUD 5/8-18X2 1/2 GR5 NUT LUG 9/16-18 X 90 PLT HUB 8-BOLT SPINDLE 2.75X AXLE SPINDLE 2X12 1/2 (Q783) SEAL GREASE 1.875X3.000X0.313 BRG CONE 1.62IDX.78WD#LM BRG CUP 2.89ODX.58WD #LM HUB 890 W/CUPS 6-BOLT 6" BC BEARING CUP LM BEARING CONE LM WASHER SPINDLE - 7/8 NUT HEX SLOTTED 7/8-14 PLT PIN COTTER 5/32 X 1 1/2 LONG GREASE CAP 2.448X1.12X.25 HUB STUD 9/16-18X2 1/8 J1102 NUT LUG 9/16-18 X 90 PLT HUB 6-BOLT SPINDLE 2X AXLE SPINDLE 2X13 1/2 (Q783) HUB 6-BOLT SPINDLE 2X AXLE SPINDLE 2 X 17 (Q783) HUB 6-BOLT SPINDLE 2 X 17 Q783 Includes items 1-13 Includeds items Includes items & 29 Includes items & 31 06/13/ P

38 Table of Contents Depth Control Assembly Part Number Index P /13/18

39 Table of Contents Part Number Index Section 4: Hydraulics Depth Control Assembly Ref. Part No. Part Description Comments Revision dwg D C C C C C C C H C C C D H C C Image No. DEPTH STOP TUBE LONG HHCS 5/16-18X2 GR5 WASHER LOCK SPRING 5/16 PLT HHCS 1/2-13X2 1/2 GR5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT WASHER FLAT 1/2 USS PLT PIN COTTER 1/8 X 1 DEPTH STOP END RHSNB 5/8-11X3 GR5 WASHER FLAT 1/2 HARD ASTMF436 SPRING COMP.75OD.12W 2.63LG DEPTH STOP ROD 1/2" THREADED DEPTH STOP BRACKET PL 3/4MORB HYD VALVE DEPTH CONTROL CROSS 06/13/ P

40 Table of Contents Hydraulic Lift Layout Part Number Index P /13/18

41 Table of Contents Part Number Index Section 4: Hydraulics Hydraulic Lift Layout Ref. Part No. Part Description Comments Revision dwg C C C C C C C D C C C C C D C C C C C S C Image No. CYL REP 4.5X8X1.5 ROD (TIE)NPN CYL REP 4.25X8X1.5 TIR 3000# CYL REP 4X8X1.38 ROD TIE 3000# REBOUND VALVE HYD VALVE DEPTH CONTROL CROSS AD 3/4MORB 3/4MJIC EL 3/4MJIC 3/4MORB DOUBLE HYD TEE BLOCK PL 3/4MORB HH3/8R /4MORB 3/4FJIC HH3/8R /4FJIC HH3/8R /4FJIC HH3/8R /4FJIC HOSE WRAP,LARGE SIZE,SHORT(8") HH3/8R /4FJIC HH3/8R /4FJIC HG HANDLE - BLACK EXT HG HANDLE - BLACK RET AD 3/4MORB 3/4FORB (HG) HG PAIR - BLACK MORB-FORB CP 3/4FORB MALE QD POPPET TYPE Includes items /13/ P

42 Table of Contents Hydraulic Fold Layout Part Number Index P /13/18

43 Table of Contents Part Number Index Section 4: Hydraulics Hydraulic Fold Layout Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C C D D C C C S C D C C C C C C C C C C C C C C C C C C Image No. CYL 4.5X30X1.5 TIE CL AD 3/4MORB 3/4MJIC TE 3/4MORB 3/4MJIC 3/4MJIC AD 3/4MORB 3/4FJIC CR 3/4MJIC EL 3/4FJIC 3/4MJIC TE 3/4MJIC 3/4MORB 3/4MJIC AD 3/4FJIC 3/4FJIC UNION EL 3/4MJIC 9/16MORB EXT EL 3/4MJIC 9/16MORB TE 3/4FJIC 3/4MJIC 3/4MJIC ORIFICE PLATE 1/16 3/4MORB DOUBLE HYD TEE BLOCK HG HANDLE - GREEN EXT HG HANDLE - GREEN RET AD 3/4MORB 3/4FORB (HG) HG PAIR - GREEN MORB-FORB CP 3/4FORB MALE QD POPPET TYPE HOSE WRAP, LARGE SIZE, SHORT (8") EL 3/4MJIC 3/4MORB TE 3/4MJIC NC POPPET SOLENOID VALVE VALVE PO CHECK 2:1 W/9/16FORB HH3/8R /4FJIC HH3/8R /4FJIC HH3/8R /4FJIC HH3/ /4FJIC HH3/8R /4MORB 3/4FJIC HH3/8R /4FJIC HH3/8 R /4FJIC HHCS 5/16-18X5 1/2 GR5 HHCS 5/16-18X3 1/2 GR5 WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT HH3/8R /4FJIC 3/4FJIC HH3/8R /4FJIC HH3/8R /4FJIC Used in all Cylinder connections Includes items Used with 2 Tee Blocks Used with 1 Tee Block 06/13/ P

44 Table of Contents Opener Hydraulics (Front) Part Number Index P /13/18

45 Table of Contents Part Number Index Section 4: Hydraulics Opener Hydraulics (Front) Ref. Part No. Part Description Comments Revision dwg H D C C C C C C S D C C C C C C C C C C C C C C C C C C C C C C D C C C C C C Image No. VALVE BRACKET PLATE TORCHED VALVE PRESS REDUCING W/CHECK HYDRAULIC BYPASS VALVE CP 3/4FORB MALE QD POPPET TYPE AD 3/4MORB 3/4FORB (HG) HG HANDLE - RED RET HG HANDLE - RED EXT HG PAIR - RED MORB-FORB HOSE WRAP, LARGE SIZE, SHORT (8") HHCS 3/8-16X5 1/2 GR5 WASHER FLAT 3/8 USS PLT WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT COUNTERBALANCE VALVE MAN. T.T. EL 3/4MJIC 3/4MORB PRESSURE GAUGE 3000 PSI EL 3/4MJIC 9/16MORB FILTER INLINE 3/4FORB 3/4MJIC AD 3/4MORB 3/4FJIC AD 9/16MORB 1/4FNPT EL 45 9/16MORB 3/4MJIC TE 3/4MJIC 3/4MORB 3/4MJIC TE 3/4MJIC 3/4MJIC 3/4FJIC TE 3/4MJIC EL 3/4FJIC 3/4MJIC AD 3/4MORB 3/4MJIC HH3/8R /4MORB 3/4FJIC HH3/8R /4FJIC HH3/8R /4FJIC HH3/8R /4FJIC HH3/8R /4FJIC BRACKET - COUNTER BALANCE HHCS 5/16-18X3 1/2 GR5 WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT U-BOLT 1/2-13X3 1/32X5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT Includes items /13/ P

46 Table of Contents Opener Hydraulics (Rear) Part Number Index P /13/18

47 Table of Contents Part Number Index Section 4: Hydraulics Opener Hydraulics (Rear) Ref. Part No. Part Description Comments Revision dwg C D C C C C C C C C C C C C C C C C C C Image No. CYL 2.5X6X1.125 ROD (TIE ROD) DOUBLE HYD TEE BLOCK TE 3/4MJIC EL 3/4MJIC 3/4MORB AD 3/4MORB 3/4MJIC HH3/8R /4FJIC HH3/8R /4FJIC HH3/8R /4FJIC HH3/8R /4FJIC HH3/8R /4FJIC 3/4FJIC HH3/8R /4FJIC HH3/8R /4FJIC HH3/8R /4FJIC HH3/8R /4FJIC HH3/8R /4FJIC HH3/8R /4FJIC HH3/8R /4FJIC HH3/8R /4FJIC HH3/8R /4FJIC VALVE INLINE CHECK W/ORIFIC Used in All Hydraulic Cylinder ports Used in Same loction on the left side of the machine Used in Same loction on the left side of the machine Right Side Route to Oustide Wing Left Side Route to Outside Wing Used in Same loction on the left side of the machine Right Side Routes to Inside Wing Inside Cylinder Left Side Routes to Inside Wing Inside Cylinder 1 in each bottom ports on the bottom double tee block 06/13/ P

48 Table of Contents Part Number Index Wing Fold & Tower Retract Hydraulic Assembly P /13/18

49 Table of Contents Part Number Index Section 4: Hydraulics Wing Fold & Tower Retract Hydraulic Assembly Ref. Part No. Part Description Comments Revision dwg C C D C C C C C C C C C C C C D C C C Image No. CYL 1.50X4.0X.75 WELD 1 PIN EL 3/4MJIC 9/16MORB HYD HOSE CLAMP BRACKET HHCS 5/16-18X5/8 GR5 TE 3/4MJIC BULKHEAD TE 3/4MJICBH 3/4MJIC 3/4MJIC CP 3/4FJIC HH3/8R /4FJIC HH3/8R /4FJIC HH3/8R /4FJIC HH3/8R /4FJIC HH3/8R /4FJIC HH3/8R /4FJIC HH3/8R /4FJIC HH3/8R /4FJIC ORFICE PLATE 1/16 3/4MORB EL 3/4MJIC 3/4MORB HH3/8R /4FJIC CYL 4X14X1.25 ROD (TIE ROD) Routes from bottom bulkhead fitting to rod end of tower cylinder Routes from top bulkhead fitting to base end of tower cylinder (Shown) Left Side for tower retrack system Right side for tower retract system Attaches to rod end of center fold cyl and rod end of outside fold cyl Used in all fold cyl ports Attaches to base end of center fold cyl and base end of outside fold cyl 06/13/ P

50 Table of Contents Part Number Index Hydraulic Cylinder ( C 4X8X1.38 Rod) P /13/18

51 Table of Contents Part Number Index Section 4: Hydraulics Hydraulic Cylinder ( C 4X8X1.38 Rod) Ref. Part No. Part Description Comments Revision dwg M7016-ADI 2M6816NC 3R5840 3R5812 4R5109 5R5116 6R5164-ADI 7M6316 2A0024 2A C C C C C Image No. MIDWAY HARDENED CLEVIS ADI MW ROD 1 3/8 DIA MW HEAD MW HEAD MW PISTON MIDWAY TUBE MIDWAY ADI BASE MW TIE ROD 4 X 10 CYLINDER MW WIPER SEAL U-CUP O-RING MIDWAY BACK UP MIDWAY TEFLON SEAL LOADER WEAR RING O-RING MW PISTON NUT 1-14 MW TIE ROD NUT NUT HEX 3/8-16 PLAIN HHCS 3/8-16X1 3/4 GR5 SEAL KIT MW 4 RPH CYL 4A5103 PIN CLEVIS 1 X 3 1/8 USABLE PIN COTTER 3/16 X 2 (S/N 1646DD+) (S/N 1645DD-) Only in item 20 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Rev. 2 Rev. 1 06/13/ P

52 Table of Contents Part Number Index Hydraulic Cylinder ( C 4.5X8X1.5 Rod) P /13/18

53 Table of Contents Part Number Index Section 4: Hydraulics Hydraulic Cylinder ( C 4.5X8X1.5 Rod) Ref. Part No. Part Description Comments Revision dwg M7016-ADI 2M7516NC 3R7512 4R7109 5R7116 6R7116-ADI 7M7316 2A0024 2A C C C 2A0134 2A C Image No. CLEVIS ROD MIDWAY MIDWAY ROD MW HEAD PISTON MIDWAY MIDWAY TUBE MIDWAY BASE MIDWAY TIE ROD MW WIPER U-CUP O-RING MIDWAY BACK-UP MIDWAY TEFLON SEAL O-RING LOADER MIDWAY WEAR RING MIDWAY MW PISTON NUT SEAL MW PISTON NUT 1-14 MW TIE ROD NUT NUT HEX 3/8-16 PLAIN HHCS 3/8-16X1 3/4 GR5 PIN CLEVIS 1 X 3 11/16 GR5 PLT MW COTTER PIN MW PLUG SEAL KIT MW 4.5 RPHCYL 4A7104 Only available in item #23 Only available in item #23 Only available in item #23 Only available in item #23 Only available in item #23 Only available in item #23 Only available in item #23 Only available in item #23 06/13/ P

54 Table of Contents Part Number Index Hydraulic Cylinder ( C 1.50X4.0X.75 Rod) P /13/18

55 Table of Contents Part Number Index Section 4: Hydraulics Hydraulic Cylinder ( C 1.50X4.0X.75 Rod) Ref. Part No. Part Description Comments Revision dwg43892 CLEVIS PIN 2A D A1785 4C6989 2A A A O-RING 2A A D A C C Image No. 1D COTTER PIN ROD CLEVIS SNAP RING HEAD WIPER U-CUP RETAINING RING 2A BACK-UP O-RING PISTON NUT TUBE ASSY CROSS - SEAL KIT Only in item 15 Only in item 15 Only in item 15 Only in item 15 Only in item 15 Only in item 15 Only in item 15 06/13/ P

56 Table of Contents Part Number Index Hydraulic Cylinder ( C 4.25X8X1.50 Rod) P /13/18

57 Table of Contents Part Number Index Section 4: Hydraulics Hydraulic Cylinder ( C 4.25X8X1.50 Rod) Ref. Part No. Part Description Comments Revision dwg M7021-ADI 2S7516NC 3R6940 3R6912 4R6109 5R5116 6R6164-ADI 7M7316 2A C C C C C C Image No. MW ROD CLEVIS 1.00PN THD MW ROD MW HEAD HEAD MIDWAY PISTON MIDWAY MW TUBE MIDWAY ADI BASE MW TIE ROD MW WIPER SEAL U-CUP O-RING MIDWAY BACK UP MIDWAY TEFLON SEAL LOADER WEAR RING O-RING MW PISTON NUT 1-14 NUT HEX 3/4-16 PLAIN NUT HEX 3/8-16 PLAIN HHCS 3/8-16X1 3/4 GR5 SEAL KIT MW 4.25 RPHCYL 4A6104 PIN CLEVIS 1 X 3 1/8 USABLE PIN COTTER 3/16 X 2 (S/N 1646DD+) (S/N 1645DD-) Only in item 20 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Rev. 2 Rev. 1 06/13/ P

58 Table of Contents Part Number Index Hydraulic Cylinder ( C 4.5X30X1.5 Rod) P /13/18

59 Table of Contents Part Number Index Section 4: Hydraulics Hydraulic Cylinder ( C 4.5X30X1.5 Rod) Ref. Part No. Part Description Comments Revision dwg M7021-ADI 2S7594NC 3R7412 4M7110 5M7538 6R7182-ADI 7M7338 2A0025 2A C C C C C Image No. MW ROD CLEVIS 1.00PN THD MIDWAY ROD MIDWAY HEAD MW PISTON MW TUBE 4.5 X 30 CYLINDER MIDWAY ADI BASE MW TIE ROD 4.5 X 30 CYLINDER MW WIPER U-CUP O-RING MIDWAY BACK UP MIDWAY CROWN SEAL MIDWAY MW PISTON NUT SEAL MW PISTON NUT MW TIE ROD NUT NUT HEX 3/8-16 PLAIN HHCS 3/8-16X1 3/4 GR5 SEAL KIT MW5A7114 PIN CLEVIS 1 X 3 1/8 USABLE PIN COTTER 3/16 X 2 Only in item 18 Only in item 18 Only in item 18 Only in item 18 Only in item 18 Only in item 18 06/13/ P

60 Table of Contents Part Number Index Hydraulic Cylinder ( C 4X14X1.25 Rod) P /13/18

61 Table of Contents Part Number Index Section 4: Hydraulics Hydraulic Cylinder ( C 4X14X1.25 Rod) Ref. Part No. Part Description Comments Revision dwg M7016-ADI 2M6420NC 3R5312 4M6108 5M6122 6R5162-ADI 7M6322 2A0024 2A C C C C C Image No. MW ROD CLEVIS MIDWAY ROD MIDWAY HEAD MW PISTON MW TUBE 4.5 X 30 CYLINDER MIDWAY ADI BASE MW TIE ROD 4.5 X 30 CYLINDER MW WIPER U-CUP O-RING MIDWAY BACK UP MIDWAY CROWN SEAL MIDWAY MW PISTON NUT SEAL MW PISTON NUT MW TIE ROD NUT NUT HEX 3/8-16 PLAIN HHCS 3/8-16X1 3/4 GR5 CYL SEAL KIT 4 X 14 MW 5A6102 PIN CLEVIS 1 X 3 1/8 USABLE PIN COTTER 3/16 X 2 Only in item 18 Only in item 18 Only in item 18 Only in item 18 Only in item 18 Only in item 18 06/13/ P

62 Table of Contents Part Number Index Hydraulic Cylinder ( C 2.5X6X1.125 Rod) P /13/18

63 Table of Contents Part Number Index Section 4: Hydraulics Hydraulic Cylinder ( C 2.5X6X1.125 Rod) Ref. Part No. Part Description Comments Revision dwg M6006-ADI 2M3310NC 3R0312 4M3108 5M3114 6R0162-ADI 7M3314 2A0022 2A C C C C C Image No. MW ROD CLEVIS MIDWAY ROD MIDWAY HEAD MW PISTON MW TUBE 4.5 X 30 CYLINDER MIDWAY ADI BASE MW TIE ROD 4.5 X 30 CYLINDER MW WIPER U-CUP O-RING MIDWAY BACK UP MIDWAY CROWN SEAL MIDWAY MW PISTON NUT SEAL MW PISTON NUT MW TIE ROD NUT NUT HEX 3/8-16 PLAIN HHCS 3/8-16X1 3/4 GR5 SEAL KIT MW 2.5 CYL 3A3102 PIN CLEVIS 1 X 3 1/8 USABLE PIN COTTER 3/16 X 2 Only in item 18 Only in item 18 Only in item 18 Only in item 18 Only in item 18 Only in item 18 06/13/ P

64 Table of Contents K-Flex Shank Assembly Part Number Index P /13/18

65 Table of Contents Part Number Index Section 5: Shanks K-Flex Shank Assembly Ref. Part No. Part Description Comments Revision dwg C D C D C C C C C C L C C C C A C C C Image No. HVY DUTY K-FLEX SHANK MOUNT K-FLEX CLAMP 4X3 HD SHANK 5/8X1 3/4X30 FLAT K-FLEX CLIP, 4 HHCS 1/2-13X5 GR5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT HHCS 1/2-13X1 1/2 GR5 HHCS 5/8-11X1 3/4 GR5 NUT HEX TOP LOCK 5/8-11 PLT SHANK FLAT HVY K-FLEX ASSY 4X3 SWEEP 11 HARDFACED PLOW 7/16-14X1 3/4 GR5 WASHER FLAT 7/16 USS PLT NUT HEX NYLOCK 7/16-14 PLT FCA " HF SWEEPS SHANK 5/8X1 3/4X30 MD OFFSET CASTING FERTILIZER BOOT PLOW 7/16-14X2 1/4 GR5 Includes items 1-10 Includes items Used with Fertilizer Option Only Used with Fertilizer Option Only 06/13/ P

66 Magnum Shanks Table of Contents Part Number Index P /13/18

67 Table of Contents Part Number Index Section 5: Shanks Magnum Shanks Ref. Part No. Part Description Comments Revision dwg C A C C V V D D C C C C C C C C C L L C C C C Image No. SHANK 5/8X1 3/4X30 MD OFFSET 2 FCA " HF SWEEPS CASTING FERTILIZER BOOT PLOW 7/16-14X2 1/4 GR5 HEAVY SPRING/PLUG SUB ASSY SHANK CRADLE WITH BUSHINGS SHANK UPRIGHT F/4" TUBE SHANK BRACKET PIVOT TUBE U-BOLT 5/8-11 X 4 1/3 X 4 NUT HEX TOP LOCK 5/8-11 PLT HHCS 1/2-13X1 1/2 GR5 SPCL THD RHSNB 3/4-10X4 1/8 GR5 SPTHD NUT HEX JAM NYLOCK 3/4-10 PLT HHCS 1/2-13X3 GR5 SPCL THD PLT NUT HEX TOP LOCK 1/2-13 PLT HHCS 5/8-11X1 3/4 GR5 SHANK 5/8X1 3/4X30 FLAT SHANK OFFSET MD SPRING HVY 4X3 SHANK FLAT SPRING HVY ASSY 4X3 SWEEP 11 HARDFACED PLOW 7/16-14X1 3/4 GR5 WASHER FLAT 7/16 USS PLT NUT HEX NYLOCK 7/16-14 PLT Includes items Used with Fertilizer Option Only Used with Fertilizer Option Only Includes items 1-16 Includes items /13/ P

68 Table of Contents 9 & 12 Outlet Towers Part Number Index P /13/18

69 Table of Contents Part Number Index Section 6: Towers 9 & 12 Outlet Towers Ref. Part No. Part Description Comments Revision dwg K K C H D D C D C C C C R C C C C H C R D C H H C C C D C H C C C Image No. 9 OUTLET AIR TOWER ASM 12 OUTLET AIR TOWER ASM NUT HEX NYLOCK 1/4-20 HANDLE T M8X1.25 THD STUD 9 OUTLET TOP COVER 12 OUTLET TOP COVER KNOB 6MX1 SMALL TOWER CONE CONE TOWER SFCHMS 1/4-20 X 1 1/4 PLT DAISY CHAIN BLOCK 32MM MODULAR ELBOW 1 1/2" INLET SS INSERT PVC SEED HOSE 1 1/4 ID CLAMP HOSE 1 1/2 NO. 24 U-BOLT 1/2-13 X 2 1/2 X 4 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT 2.5 AIR TOWER TUBE WLDMNT U-BOLT 1/2-13X4 1/32X4 SEED HOSE 2 1/2 ID PLATE - TORCHED TOWER MNT 2 1/2 AIR HOSE BAND CLAMP 9 OUTLET BASE MNT WELDMENT 12 OUTLET BASE MNT WELDMENT DCBS MODULE HHCS 1/4-20X1 1/2 GR5 WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT BRACKET MOUNT DCBS MODULE DCBS MODULE HARNESS ISO 2 LOOP DCBS EXT Y HARNESS ELBOW 1 1/4" INLET SS INSERT 11' U-BOLT ON STUB (4X3 TUBE) HHCS 5/16-18X3 1/2 GR5 WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT Model FCA Model FCA Used on 9 outlet tower Used on 12 outlet tower Used on 9 outlet tower Used on 12 outlet tower Mounts on opener seed tube 06/13/ P

70 Table of Contents Tower Retract Bracket Part Number Index P /13/18

71 Table of Contents Part Number Index Section 6: Towers Tower Retract Bracket Ref. Part No. Part Description Comments Revision dwg H H H H H C H C C C C C C C C C C C L L C C Image No. TOWER RETRACT UPPER ARM TOWER RETRACT UPPER ARM TOWER RETRACT BASE BKT TOWER RETRACT LOWER ARM TOWER RETRACT LOWER ARM CYL 1.50X4.0X.75 WELD 1 PIN PIVOT WLDMNT SHOULDER BOLT 3/4X3X5/8-11 WASHER MACH 1 1/4X3/4X14GA U-BOLT 1/2-13 X 2 1/2 X 3 1/2 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT PARALLEL ARM PIVOT BUSHING HHCS 3/4-10X7 GR5 NUT HEX TOP LOCK 3/4-10 PLT WASHER FLAT 1/2 SAE PLT U-BOLT 1/2-13X4 1/32X4 U-BOLT 1/2-13X3 1/32X5 TOWER RETRACT RH TOWER RETRACT LH DECAL WARNING HAND CRUSHING WASHER FLAT 3/4 SAE PLT Right (Shown) Left Right (Shown) Left Includes Pin and Cotter Pin Apply Lock Tight when assembling Includes Items 1-16 (Shown) Includes Items /13/ P

72 Table of Contents Tower Wiring Assembly Part Number Index P /13/18

73 Table of Contents Part Number Index Section 6: Towers Tower Wiring Assembly Ref. Part No. Part Description Comments Revision dwg K K C C C C C S C C C C C C D C C C C V V H Image No. 9 OUTLET AIR TOWER ASM 12 OUTLET AIR TOWER ASM DCBS MODULE DCBS MODULE HARNESS ISO 2 LOOP MODULE ESTENSION HARNESS 6 MTR HARNESS, EXT, DCBS, Y HARNESS, EXT, DCBS, 5' HARNESS, EXT, DCBS, 10' HARNESS, EXT, DCBS, 20' CAN TERMINATOR DT06-6S IND. SENSOR M18X46 DJ SWITCH SPDT W/WISKER & WIRE NUT HEX 6-32SS WASHER LOCK #6 SS WASHER FLAT #6 SAE PLT HARNESS, DJ, DCBS TO INTELLIAG DJ 20' HARNESS EXT EXT ISO IBBC MP630F MP150F 6' 6-PIN DEUTSCH EXT 50' PROXIMITY SENSOR MNT BRKT CTA SCREW PAN HD #6-32 X 1 PLT SCREW PAN HD 6-32 X 1/2 SS HARNESS, FCA, LIFT SWITCH HARNESS, ADC, LIFT SWITCH LIFT SENSOR KIT W/ PROX SENSOR LIFT SENSOR KIT W/ PROX SENSOR SENSOR MOUNT Removed S/N GP-D1004P+ Part Number change, was Part Number change, was Part Number change, was Part Number change, was S/N GP-D1004P+ Replaced by C (S/N GP-D1003P-) Part Number change, was Replaced by C S/N GP-D1004P- Replaced by C S/N GP-D1004P- Replaced by C S/N GP-D1004P- Replaces item #14-16 S/N GP-D1005P+ Rev. 2 Rev. 1 Rev. 1 Rev. 1 Rev. 2 Rev. 2 Replaced by C GP-D1004P- Rev. 1 GP-D1005P+ Rev. 2 Replaced by C GP-D1004P- Rev. 1 Includes items & S/N Rev. 2 GP-D1005P+ Includes items & Rev. 1 Replaced by V S/N GP-D1004P- 06/13/ P

74 Opener Mounts Table of Contents Part Number Index P /13/18

75 Opener Mounts Table of Contents Part Number Index Section 7: Openers Ref. Part No. Part Description Comments Revision dwg H H H H H H H H H C C C D C C C C C C D D D D D D C C C C C H H H H H H C C C C H C C C C C C Image No. OPENER BAR CYL MNT OPENER ARM BKT OPENER ARM BKT OPENER MNT ARM W/CYL LUG OPENER MNT ARM OPENER MNT ARM OPENER MNT ARM W/ROD OPENER MNT ARM WLDMNT RH OPENER MNT ARM WLDMNT LH U-BOLT 3/4-10 X 3 1/32 X 4 1/2 WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT 1"X7" GRADE 8 SPECIAL THREAD NUT HEX TOP LOCK 1-8PLT POLYGON SLEEVE BEARING HHCS 3/4-10X2 1/4 GR5 U-BOLT 5/8-11X4 1/32X4 1/4 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT OPENER BAR 7.5 INSIDE WING OPENED BAR 10 INSIDE WING OPENER BAR 7.5 CENTER OPENER BAR 10 CENTER OPENER BAR 7.5 OUTSIDE WING OPENER BAR 10 OUTSIDE WING CYL 2.5X6X1.125 ROD (TIE ROD) PIN CLEVIS 1 X 3 1/8 USABLE PIN COTTER 3/16 X 2 DECAL WARNING HAND CRUSHING WASHER MACH 1.5X1.00X.075 HOSE HOLDER BAR 7.5 CENTER HOSE HOLDER BAR 10 CENTER HOSE HOLDER BAR 7.5 INSIDE W HOSE HOLDER BAR 10 INSIDE W HOSE HOLDER BAR 7.5 OUTSIDE W HOSE HOLDER BAR 10 OUTSIDE W U-BOLT 1/2-13 X 3 1/32 X 4 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT FERTILIZER HOSE RETAINER SENSOR MOUNT HHCS 1/4-20X1 GR5 NUT HEX 1/4-12 PLT WASHER LOCK SPRING 1/4 PLT NUT HEX 6-32SS WASHER LOCK #6 SS WASHER FLAT #6 SAE PLT Used with Opener Mount with Hydraulic Cylinder Used with Opener Mount with Hydraulic Cylinder Used with Opener Mount w/o Hydraulic Cylinder Used with Hydraulic Cylinder Used w/o Hydraulic Cylinder Replaced by H S/N GP-D1004P+ (Used with sensor C) Used on Outside RH Wing Only Used on Outside LH Wing Only Used on Inside Wing LH & RH 7.5" Spacing Used on Inside Wing LH & RH 10" Spacing Used on Center Frame 7.5" Spacing Used on Center Frame 10" Spacing Used on Outside Wing LH & RH 7.5" Spacing Used on Outside Wing LH & RH 10" Spacing Place on the outside face of opener bar cylinder mounts on each section. Used on Center Frame 7.5" Spacing Used on Center Frame 10" Spacing Used on Inside Wing 7.5" Spacing Used on Center Frame 10" Spacing Used on Inside Wing 7.5" Spacing Used on Center Frame 10" Spacing Snaps on round tube on hose holder bar S/N GP-D1004P+ S/N GP-D1004P+ S/N GP-D1004P+ S/N GP-D1004P+ S/N GP-D1004P+ S/N GP-D1004P+ S/N GP-D1004P+ 06/13/ P