Parts Manual. Nutri-Pro 40ft. 3 Coulter NP Copyright 2014 Printed 09/16/ P

Transcription

1 Table of Contents Parts Manual NP Nutri-Pro 40ft. 3 Coulter Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! Cover illustration may show optional equipment not supplied with standard unit. Copyright 2014 Printed 09/16/ P

2 Table of Contents Table of Contents Section 1: Introduction...4 Using This Manual...4 Manual Replacement Information...4 Manual Revisions...4 Touch-up Paint...4 Hardware Legend...5 Replacement Hardware...5 Serial Numbers...5 Part Number Service Coding...5 Frame Point Hitch...6 Wing to Frame...8 Wing Rest Mounting...12 Lift Assist to Frame...14 Tank Mounting...16 Weight Bracket ( S)...18 Rear Hitch...20 Shiftable Hitch Assembly ( S)...22 Shiftable Hitch Assembly ( S)...24 LED Lights and Grease Bank (S/N C1038A+)...26 Lights and Grease Bank (S/N C1037A-)...28 Transport...30 Lift Assist Assembly...30 Gauge Wheel and Stand...34 Coulters...36 Coulter Assembly...36 Double Terra-Tine...38 Hydraulics...40 Hydraulic Valve Mounting ( S)...40 Fold Hydraulics (2011-)...42 Fold Hydraulics (2012+)...44 Lift Assist Hydraulics...46 Hydraulic Cylinder ( C)...48 Hydraulic Cylinder ( C)...50 Hydraulic Cylinder ( C)...52 Hydraulic Hose Grips...54 Liquid Fertilizer...56 Fertilizer Drive Mounting...56 Liquid Fertilizer Ground Drive Assembly...58 Fertilizer Plumbing to Tanks...60 Tank Fertilizer Plumbing...62 Variable Rate Kit...64 Fertilizer Wet Boom...66 Hydraulic Pump...68 Hydraulic Pump Assembly...70 John-Blue Pump ( C)...72 Ball Valve Assembly ( C)...74 Banjo Strainer Assembly ( C)...76 Decals...78 Decal Placement Copyright 2014 All rights reserved Printed 09/16/14 Great Plains Manufacturing, Inc. provides this publication as is without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. Great Plains Manufacturing, Incorporated Trademarks The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains All other brands and product names are trademarks or registered trademarks of their respective holders. Printed in the United States of America P /16/14

3 Table of Contents Alphabetized Table of Contents Selected Models 2 2 Point Hitch...6 B Ball Valve Assembly ( C)...74 Banjo Strainer Assembly ( C)...76 V Variable Rate Kit...64 W Weight Bracket ( S)...18 Wing Rest Mounting...12 Wing to Frame...8 C Coulter Assembly...36 D Decal Placement...78 Double Terra-Tine...38 F Fertilizer Drive Mounting...56 Fertilizer Plumbing to Tanks...60 Fertilizer Wet Boom...66 Fold Hydraulics (2011-)...42 Fold Hydraulics (2012+)...44 G Gauge Wheel and Stand...34 H Hydraulic Cylinder ( C)...48 Hydraulic Cylinder ( C)...50 Hydraulic Cylinder ( C)...52 Hydraulic Hose Grips...54 Hydraulic Pump...68 Hydraulic Pump Assembly...70 Hydraulic Valve Mounting ( S)...40 J John-Blue Pump ( C)...72 L LED Lights and Grease Bank (S/N C1038A+)...26 Lift Assist Assembly...30 Lift Assist Hydraulics...46 Lift Assist to Frame...14 Lights and Grease Bank (S/N C1037A-)...28 Liquid Fertilizer Ground Drive Assembly...58 R Rear Hitch...20 S Shiftable Hitch Assembly ( S)...22 Shiftable Hitch Assembly ( S)...24 T Tank Fertilizer Plumbing...62 Tank Mounting /16/ P

4 Table of Contents P /16/14

5 Table of Contents 09/16/ P

6 2 Point Hitch Table of Contents P /16/14

7 2 Point Hitch Table of Contents Frame Ref. Part No. Part Description Comments Revision dwg H C C C C C H C H C C H C H Image No. LEG PARK STD PIN HITCH 1 7/16 X 8 3/8 PLT PIN COTTER 3/16 X 2 PIN HITCH 3/4 X 5 1/4 USEABLE NUT LOCK 5/8-11 PLT WASHER LOCK SPRING 3/4 PLT HITCH PLATE WELDMENT U-BOLT 3/4-10 X 6 1/32 X 5 5/8 NP4000 2PT TANK FRAME NUT HEX 7/8-9 PLT WASHER LOCK SPRING 7/8 PLT NP4000 CENTER FRAME WELDMENT HHCS 7/8-9X2 3/4 GR5 NP4000 2PT NO TANK FRAME 09/16/ P

8 Wing to Frame Table of Contents P /16/14

9 Wing to Frame Table of Contents Frame Ref. Part No. Part Description Comments Revision dwg H C H C C C C H C H H H H H C C C C H C C C D C C H C H H H C C D D C C C D C C C D D C C C C H C C C C C C C Image No. NP4000 CENTER FRAME WELDMENT CYL 4X24X1.5 ROD(TIE)34.63C.L. NP4000 GULL WING STOP PIN CLEVIS 1 X 4.13 USBL WASHER FLAT 1 USS PLT PIN COTTER 1/4 X 2 1/2 PLT BUSHING SPINDLE 1 1/2X1 1/4X1 WING PIVOT PIN WELEMENT PIN ROLL 3/8 X 2 PLT NP4000 INNER WING RH 2 NP4000 INNER WING LH 2 NP4000 OTR WING HNG FRONT PIN WING LATCH NP4000 WING LATCH INNER HHCS 1/2-13X1 1/2 GR5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT PIN CLEVIS 1 X 7 1/4 USABLE NP4000 DBL HINGE BRACKET WASHER MACH 1.5X1.00X.075 PIN COTTER 3/16 X 2 WASHER FLAT 3/4 USS PLT NP4000 HINGE LINK BUSHING SPINDLE 1 1/2X1 1/4X1 PIN CLEVIS 1 X 2 29/64 USABLE NP4000 OTR WING HNG REAR PIN SNAP RING EXT 1 1/4 HEAVY NP4000 OUTER WING RH 2 NP4000 OUTER WING LH 2 NP4000 WING LATCH OUTER HHCS 3/8-16X1 GR5 BUSHING CYL 1 1/4 X 1 X 1 WING SHIM 12GA WING SHIM 16GA WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT PIN 3/8 X 3 USABLE LW/PIN CYL LOCK CHANNEL 20 1/4 LONG NUT LOCK 3/4-10 PLT HHCS 3/4-10X4 1/2 GR5 PIN, HAIR COTTER 3/16 WIRE DIA LOCK CHANNEL HOLDER BENT PIN 1/2 X 11 U-BOLT 1/2-13 X 6 1/32 X 7 1/4 U-BOLT 1/2-13 X 6 1/32 X 8 GR5 NUT HEX 5/8-11 PLT WASHER LOCK SPRING 5/8 PLT NP4000 SIDEDRESS WING HHCS 5/8-11X2 GR5 CYL 4X24X1 1/2 ROD (TIE ROD) WASHER FLAT 3/8 SAE PLT HHCS 3/8-16X7/8 GR5 HHCS 1/4-20X2 GR5 WASHER FLAT 1/4 SAE PLT SEAL KIT/ C SHOEM. #1427 Refer to Hydraulic Cylinder C for breakdown Shown Right Hand Left Hand Shown Right Hand Left Hand Shown Refer to Hydraulic Cylinder ( C) for breakdown 09/16/ P

10 Table of Contents Wing to Frame (continued) Ref Part No D C C C H C C H C C D H Part Description VALVE MOUNT WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT NUT HEX 3/4-10 PLT NYLOCK PLUNGER WELDMENT SPRING LEVER HHCS 3/4-10X6 GR5 LATCH WELDMENT HHCS 3/8-16X3/4 GR5 WASHER FLAT 1/2 SAE PLT WALKBOARD LADDER PIVOT BUSHING NP4000 WING STOP, SPRG PLNGR Comments Revision P /16/14

11 Table of Contents Frame Wing to Frame (continued) This Page Intentionally Left Blank 09/16/ P

12 Table of Contents Wing Rest Mounting P /16/14

13 Table of Contents Frame Wing Rest Mounting Ref. Part No. Part Description Comments Revision dwg H C C C C C Image No. TRANSPORT REST WELDMENT II NUT HEX 5/8-11 PLT WASHER LOCK SPRING 5/8 PLT U-BOLT 5/8-11 X 4 1/32 X 7 3/8 HHCS 5/8-11X1 3/4 GR5 PIN HITCH 3/4 X 5 1/4 USEABLE 09/16/ P

14 Table of Contents Lift Assist to Frame P /16/14

15 Table of Contents Frame Lift Assist to Frame Ref. Part No. Part Description Comments Revision dwg C C C H H C H C C C C C C C D K K Image No. HHCS 1-8X2 1/2 GR5 WASHER LOCK SPRING 1 PLT NUT HEX 1-8 PLT NP4000 LIFT ASSIS FRAME WLDMT NP4000 LA FRAME GEN 2 HHCS 1 1/4-7X9 GR5 SPTHD NP4000 LIFT ASSIST CLAMP WLDMT WASHER LOCK 1 1/4 SPRING PLT NUT HEX 1 1/4-7 PLT PIN HITCH 1 X 7 1/2 USABLE LG STEEL BUSHING 3 1/4X3IDX3LONG PIVOT THRUST WASHER HHCS 3/4-10X5 GR5 NUT HEX TOP LOCK 3/4-10 PLT NP4000 LIFT ASSIST PIVOT PIN NP4000 LA TAIL WHEEL ASSY NP4000 LA TAIL WHEEL ASSY RH (S/N C1037A-) (S/N C1038A+) 09/16/ P

16 Tank Mounting Table of Contents P /16/14

17 Tank Mounting Table of Contents Frame Ref. Part No. Part Description Comments Revision dwg S H C C C C C Image No. TANK ASSEMBLY HITCH LIQUID FERT TANK STRAP SNYDER VENTED CAP TANK GAL POLY LEG DECAL AG CHEMICALS DANGER HHCS 1/2-13X4 FTHD PL 1 1/2MNPT POLYPROP NUT HEX NYLOCK 1/ /16/ P

18 Table of Contents Weight Bracket ( S) P /16/14

19 Table of Contents Frame Weight Bracket ( S) Ref. Part No. Part Description Comments Revision dwg C D D D C C C C C D C C Image No. HHCS 1-8X14 1/2 GR5 SPTHD NTA WEIGHT BKT. BAR-SHORT NTA WEIGHT BRKT. BAR-LONG NTA WEIGHT BRKT MOUNT HHCS 1/2-13X1 1/2 GR5 NUT HEX SIDE LOCK 1-8 PLT WASHER FLAT 1/2 SAE PLT NUT LOCK 1/2-13 PLT HHCS 1/2-13X2 3/4 GR5 BRACKET STOP WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT 09/16/ P

20 Rear Hitch Table of Contents P /16/14

21 Rear Hitch Table of Contents Frame Ref. Part No. Part Description Comments Revision dwg C H H C C H C C C C C C C C C C C H C H S SK13001 SK REKIT SK16003 Image No. U-BOLT 5/8-11 X 6 1/32 X 5 3/4 DROP HITCH WLDMNT HITCH EXTENSION WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT MOUNT HITCH SHUCK HHCS 1-8X2 1/2 GR5 HHCS 1/2-13X2 GR5 WASHER FLAT 1/2 SAE PLT WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT SCHUCK 850 CUSHION HITCH WASHER FLAT 1 SAE WASHER LOCK SPRING 1 PLT NUT HEX 1-8 PLT HHCS 1-8X3 1/2 GR5 HHCS 1-8X6 1/2 GR5 DRAWBAR PIVOT MOUNT NUT HEX 1-8 NYLON INSERT PLT DRAWBAR PIVOT DRAWBAR PIVOT ASSEMBLY SCHUCK - VERTICAL BACK PIN SCHUCK - 1 SET OF 2 SPRINGS SCHUCK - REPAIR KIT SCHUCK - TONGUE Shown Includes items Includes items /16/ P

22 Table of Contents Shiftable Hitch Assembly ( S) P /16/14

23 Table of Contents Frame Shiftable Hitch Assembly ( S) Ref. Part No. Part Description Comments Revision dwg36408 dwg H H C C C C C C C C C C C C C C C C H H H H C C C C S Image No. Image No. DROP A-FRAME HITCH WELDMENT DROP A-FRAME HITCH WELDMENT HHCS 1-8X6 1/2 GR5 HHCS 1-8X6 1/2 GR5 HHCS 1-8X3 1/2 GR5 HHCS 1-8X3 1/2 GR5 NUT HEX 3/4-10 PLT NUT HEX 3/4-10 PLT NUT HEX 1-8 PLT NUT HEX 1-8 PLT WASHER LOCK SPRING 3/4 PLT WASHER LOCK SPRING 3/4 PLT WASHER LOCK SPRING 1 PLT WASHER LOCK SPRING 1 PLT U-BOLT 3/4-10 X 6 1/32 X 5 5/8 U-BOLT 3/4-10 X 6 1/32 X 5 5/8 RECEIVER STYLE CUSHION HITCH RECEIVER STYLE CUSHION HITCH DRAWBAR PIVOT DRAWBAR PIVOT DRAWBAR PIVOT WELDMENT SHORT DRAWBAR PIVOT WELDMENT SHORT NUT HEX 1-8 NYLON INSERT PLT NUT HEX 1-8 NYLON INSERT PLT PIN BENT 5/2X2 3/4 USBL PIN LINCH 3/16 X 1 9/16 LONG DRAWBAR PIVOT ASSEMBLY-SHORT Includes items 2 & /16/ P

24 Table of Contents Shiftable Hitch Assembly ( S) P /16/14

25 Table of Contents Frame Shiftable Hitch Assembly ( S) Ref. Part No. Part Description Comments Revision dwg H C C C C C C C C H H C C C S Image No. A-FRAME HITCH WELDMENT-20" HHCS 1-8X6 1/2 GR5 HHCS 1-8X3 1/2 GR5 NUT HEX 3/4-10 PLT NUT HEX 1-8 PLT WASHER LOCK SPRING 3/4 PLT WASHER LOCK SPRING 1 PLT U-BOLT 3/4-10 X 6 1/32 X 5 5/8 RECEIVER STYLE CUSHION HITCH DRAWBAR PIVOT DRAWBAR PIVOT WELDMENT SHORT NUT HEX 1-8 NYLON INSERT PLT PIN BENT 5/8X2 3/4 USBL PIN LINCH 3/16 X 1 9/16 LONG DRAWBAR PIVOT ASSEMBLY-SHORT Includes items 2 & /16/ P

26 Table of Contents LED Lights and Grease Bank (S/N C1038A+) P /16/14

27 Table of Contents Frame LED Lights and Grease Bank (S/N C1038A+) Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C D D C C D C C C C C D C C C C C C C C C D C D C Image No. LIGHT HRNSS, 10' WISHBONE -LED LIGHT HARNESS, 5' LEAD - LED LIGHT HRNSS ENHANCE MODULE LED NUT HEX LOCK 1/4-20 FLG HHCS 1/4-20X1 1/2 GR5 NUT HEX NYLOCK 1/4-20 LIGHT, AMBER LAMP LED LIGHT, RED LAMP - LED U-BOLT 1/4-20 X 2 9/32 X 3 GR2 NP4000 LIGHT BAR TUBE GREASE BANK MOUNT HHCS 3/8-16X3/4 GR5 SCREW RD HD 1/4-20 X 5/8 GREASE BANK - 20 HOLE GREASE ZERK STRAIGHT 1/8-27NPT NUT HEX 3/8-16 PLT WASHER LOCK SPRING 3/8 PLT DECAL SLOW MOVING-GALV. BACKED RHSNB 5/16-18X3/4 GR5 SMV BLADE MOUNT WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT U-BOLT 3/8-16 X 6 1/32 X 5 PLT NUT HEX NYLOCK 1/2-13 HHCS 7/8-9X7 GR5 7-PIN CONNECTOR HOLDER HHCS 1/4-20X3/4 GR5 HOSE AND HARNESS RETAINER AD PUSH 1/4 TUBE 1/8 FNPT GREASE BANK AD PUSH 1/4 TUBE 1/8 FNPT Used with Rear Coulters 09/16/ P

28 Table of Contents Lights and Grease Bank (S/N C1037A-) P /16/14

29 Table of Contents Frame Lights and Grease Bank (S/N C1037A-) Ref. Part No. Part Description Comments Revision dwg C C C D C C C C C C D C C C C C C C C C C C C D C C D C C D D C C Image No. CEQUENT AG HARNESS, 5' EXT CEQUENT AG HARNESS 10' WISHBON ID PLATE NTA2007HD NUT HEX NYLOCK 1/4-20 SNAP RING EXT 3/4 CLIP NP4000 LIGHT BAR TUBE NUT HEX NYLOCK 1/2-13 HHCS 1/2-13X3 GR5 DUAL AG LIGHT W/WP ENHANCED LH DECAL SLOW MOVING-GALV. BACKED SCREW RD HD 1/4-20 X 5/8 RHSNB 5/16-18X3/4 GR5 SMV BLADE MOUNT WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT NUT HEX 6-32 SS WASHER LOCK #6 SS LIGHT HARNESS, ENHANCE MODULE 7-PIN CONNECTOR HOLDER HHCS 1/4-20X3/4 GR5 SCREW CS 6-32X3/4 NUT HEX 3/8-16 PLT WASHER LOCK SPRING 3/8 PLT HOSE AND HARNESS RETAINER U-BOLT 3/8-16 X 6 1/32 X 5 PLT AD PUSH 1/4 TUBE 1/8 FNPT GREASE BANK GREASE ZERK STRAIGHT 1/8-27NPT HHCS 3/8-16X3/4 GR5 GREASE BANK MOUNT GREASE BANK - 20 HOLE HARNESS EXT 4' 6-PIN WP AD PUSH 1/4 TUBE 1/8 FNPT Used with Rear Coulters 09/16/ P

30 Table of Contents Lift Assist Assembly P /16/14

31 Table of Contents Transport Lift Assist Assembly Ref. Part No. Part Description Comments Revision dwg C H C H H C C C H C C C C D C H C C C D D H C H C C C C D C D C C C C H H C H D C D C C C C C C C C C C HDA C C C C Image No. NUT HEX JAM 1 1/4-7 PLT HOSE LOOP W/ TAB WASHER LOCK 1 1/4 SPRING PLT LH LIFT ASSIST PVT WLDMNT RH LIFT ASSIST PVT WLDMNT HHCS 1-8X18 GR5 DECAL WARNING HIGH PRESSUR LRG NUT HEX 1 1/4-7 PLT EYEBOLT WELDMENT BUSHING CYL 1 1/4 X 1 X 1 WASHER FLAT 1 SAE WASHER LOCK SPRING 1 PLT NUT HEX 1-8 PLT 40P CASTER INNER PIVOT TUBE GREASE ZERK STRAIGHT 1/ R PARALLEL ARM WLDMNT 2 BUSHING 1 7/8X1 5/8X1 1/2 SPLT HHCS 1/2-13X1 1/4 GR5 WASHER LOCK SPRING 1/2 PLT NTA CASTER RETAINER CAP CASTER VERT SHAFT CYLINDER LOCK CHANNEL 1 1/2 X PIN 3/8 X 3 USABLE LW/PIN WIDE LA LOWER LINK WLDMT STEEL BUSHING 3 1/4X3IDX3LONG HHCS 3/4-10X4 GR5 FTHD NUT HEX JAM 3/4-10 PLT DECAL CAUTION TRANSP. LOCK PLATE RND 3/16" THK 1 7/8" DIA SPRING COMP 1.88OD x.362w UHMW RND 0 DIA X 0 LONG PIVOT THRUST WASHER NUT HEX 3/4-10 PLT WASHER LOCK SPRING 3/4 PLT HHCS 3/4-10X8 GR5 PLT NP4000 CASTR FRM WLDMT WIDE NP4000 CASTER FRAME GEN2 HHCS 3/8-16X1 3/4 GR5 NP4000 LA AXLE WLDMT NP4000 AXLE SPACER NUT LOCK 3/8-16 PLT NP4000 AXLE SPACER LONG WASHER MACH 2 1/2X1 3/4X10GA NUT HEX SLOTTED 1 1/2-12 PLT PIN COTTER 1/4 X 2 1/2 PLT DECAL CAUTION TIRE 80PSI /300 HUB STUD 5/8-18X2 1/2 GR5 SEAL 3.375X250X.438 CR BRG CONE 1.75ID HHCS 5/16-18X1 3/4 GR5 GREASE ZERK 1/4-28 X 45-DEG NUT HEX FLANGE 5/8-18 PLT CTD HD820 HUB HUB ASSY 8 BLT 6" PILOT VALVE STEM METAL TR-575 TUBLES RIM 17.5X BLT 6" PILOT TIRE SKID ST NHS 14 PLY LH, Shown RH (S/N C1037A-) (S/N C1038A+) Includes items /16/ P

32 Table of Contents Lift Assist Assembly (continued) Ref Part No C C C 2A C C D C C Part Description TIRE/WHEEL NHS 14PLY CYL 3 X 10 X 1 1/4 MW STOP BUSH SET 1 1/4 SBS125 MW COTTER PIN PIN CLEVIS 1 X 3 11/16 GR5 PLT WASHER FLAT 1 USS PLT PIN CLEVIS 1 X 9.25 USEABLE PIN ROOL 5/16 X 1 1/2 PLT HOSE WRAP X 12LG VELCR Comments Revision Includes items Refer to Hydraulic Cylinder ( C) for breakdown P /16/14

33 Table of Contents Transport Lift Assist Assembly (continued) This Page Intentionally Left Blank 09/16/ P

34 Table of Contents Gauge Wheel and Stand P /16/14

35 Table of Contents Transport Gauge Wheel and Stand Ref. Part No. Part Description Comments Revision dwg S K C C C D C C C C H C C C C H C C C H C C D C C C C C C C D Image No. RIPPER GUAGE WHEEL HUB ASY TIRE 20.5 X 8 10 PLY 6 BOLT U-BOLT 5/8-11 X 6 1/32 X 6 1/2 NUT HEX 5/8-11 PLT WASHER LOCK SPRING 5/8 PLT EXTENDED GW MOUNT PLATE HHCS 7/16-14X1 1/4 GR5 PLT SCREW JACK 2000# TP-WIND SPCL HHCS 3/4-10X2 3/4 GR5 NUT LOCK 3/4-10 PLT NP DEPTH GW MOUNT HHCS 5/8-11X2 GR5 WASHER FLAT 7/16 SAE PLT NUT HEX LOCK 7/16-14 PLT PIN BENT 1 X 4 3/4 W/HAIRPIN DEPTH GAUGE WHEEL ARM DECAL CAUTION TIRES NOT A STEP HHCS 3/4-10X2 GR5 WASHER LOCK SPRING 3/4 PLT RIPPER HUB SPINDLE WELDMENT BRG CONE 1.50ID 13600LA90028 HUB ASSY 6 BOLT 4 5/8 PILOT SPINDLE SLEEVE NUT HEX JAM 1 1/2-12 PLT BOLT WHL 9/16-18X1 1/8 GR5 VALVE STEM METAL TR-575 TUBLES WHEEL 10X6 6/ PH.18INSET TIRE 20.5 X LRE HHCS 5/8-11X7 GR5 WASHER FLAT 5/8 HARD ASTMF436 GAGE WHEEL SPACER Includes items Includes items /16/ P

36 Coulter Assembly Table of Contents P /16/14

37 Table of Contents Coulters Coulter Assembly Ref. Part No. Part Description Comments Revision dwg C C C D C H D C C C C H D D C C C C C C C D D C C C H H C C C H H C C C V C C D S C C C C C C C H D C C H Image No. NUT HEX 1/2-13 PLT NUT HEX 5/8-11 PLT WASHER LOCK SPRING 5/8 PLT COULTER CLAMP 6H X 4W U-BOLT 5/8-11 X 6 1/32 X 5 3/4 DOUBLE SHANK WELDMENT SHANK 1 1/2D X 22 FERT COULT PIN SPIROL 3/8X2 1/2 PLAIN SCREW SET 5/8-11X1 1/2 GR8 CUP NUT HEX JAM 5/8-11 PLT WASHER LOCK SPRING 1/2 PLT LOW PRO COULTER STOP WLMT PVT CLTR CASTING MOUNT RH PVT CLTR CASTING MOUNT LH GREASE ADAPT 1/4-28M X 1/4 TB WASHER MACH 1 1/4X3/4X14GA SNAP RING 3/4 EXTERNAL HEAVY WASHER MACH 1 7/8X1 1/4X 14GA SNAP RING EXT 1 1/4 HEAVY COULTER SPRING GUIDE TUBE EYE BOLT 3/4-10X14 3/4 LG SP SPRING 25 O.D. X.5 COIL COULTER SPRING WASHER NUT HEX JAM 3/4-10 PLT BUSHING 1.50ODX1.25IDX94 BUSHING 1X3/4X1 1/8 FLG HD VAN I 20" SWING ARM WLMT 20" CLTR SWING ARM LH AD 1/4MNPT X 3/8HB STEEL HHCS 1/2-13X1 3/4 GR5 WASHER FLAT 1/2 USS HARD PLT VANTAGE I 20" FERTILIZER ARM VANTAGE I 20" LH FERT. ARM BRG CUP LM GREASE ZERK STRAIGHT 1/4-28 5/8 WAVY-20" TURBO BLADE COULTER HUB & CUP ASSY OIL SEAL DOUBLE LIP BRG CONE 1.25ID LM HUB GREASE CAP COULTER HUB PACKAGE RHSNB 1/2-13X1 1/4 GR5 WASHER SPINDLE - 7/8 NUT HEX SLOTTED 7/8-14 PLT PIN COTTER 3/16 X 1 3/4 PLT NUT HEX FLANGE 1/2-13 GR G PLT COULTER BLADE 20 FLUTED NOZZLE SOLIDSTRM H1/4U-SS0040 QUICK-ATTACH MNTNG WELDMENT QUICK-ATTACH CLTR MNT WASHER FLAT 5/8 HARD ASTMF436 HHCS 5/8-11X1 3/4 GR5 COULTER SETBACK WELDMENT Shown Shown Shown Includes items Includes items /16/ P

38 Double Terra-Tine Table of Contents P /16/14

39 Table of Contents Coulters Double Terra-Tine Ref. Part No. Part Description Comments Revision dwg C D C C D C H C D C D C C H D D H C C D C C V S C D C D C C K K Image No. U-BOLT 5/8-11 X 6 1/32 X 5 3/4 COULTER CLAMP 6H X 4W WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT END PLATE LEFT PIN SPIROL 3/8X2 1/2 PLAIN ARM SHAFT WELDMENT LH PARALLEL ARM PIVOT BUSHING SPRING TERRA-TINE LEFT ASSY NUT HEX FLANGE 3/8-16 PLT TERRA-TINE SPRING ADJUSTER LH RHSNB 3/8-16X1 1/4 GR5 SET SCREW SQ HD 3/4-10 X 1 1/4 NP DBL TERRA TINE MOUNT TERRA-TINE SPRING ADJUSTER RH SPRING TERRA-TINE RIGHT ASSY ARM SHAFT WELDMENT RH WASHER 1 1/4 X 3/4 X 18 GA PLT SNAP RING 3/4 EXTERNAL HEAVY DD BRG FLANGE DUST COVER HHCS 1/4-20X5/8 GR5 HSG RIBB FLG 6BOLT PLT BRG.760 BORE 205DD FRONT FLANGE BRG ASSEMBLY RHSNB 3/8-16X3/4 GR5 TERRA-TINE FLANGE FRONT SPRING TERRA-TINE FINGER TERRA-TINE FLANGE BACK NUT HEX FLANGE 1/4-20 PLT HHCS 3/4-10X1 1/2 GR5 TERRA-TINE WHEEL RH TERRA-TINE WHEEL LH Includes items 22 & 23 Includes items 10 & Includes items 10 & /16/ P

40 Table of Contents Hydraulic Valve Mounting ( S) P /16/14

41 Table of Contents Hydraulics Hydraulic Valve Mounting ( S) Ref. Part No. Part Description Comments Revision dwg D C C C C C C C C C C C C C C C C C C C Image No. MOUNT DOWNPRESSURE VALVES HHCS 3/8-16X2 3/4 GR5 HHCS 1/4-20X2 1/4 GR5 NUT HEX 1/4-20 PLT NUT HEX 3/8-16 PLT WASHER LOCK SPRING 1/4 PLT WASHER LOCK SPRING 3/8 PLT U-BOLT 3/8-16 X 6 1/32 X 5 PLT VALVE PRESS REDUCING W/CHECK VALVE 90 DEGREE SHUT-OFF HYDRAULIC BYPASS VALVE FILTER INLINE 3/4MORB 3/4MJIC PRESSURE GAUGE 3000PSI/200BAR EL 3/4MJIC 3/4MORB TE 3/4MJIC 3/4MORB 3/4MJIC EL 3/4FJIC 3/4MJIC EL 3/4MJIC 9/16MORB AD 9/16MORB 3/4MJIC AD 9/16MORB 1/4FNPT EL 9/16MORB 3/4MORB 09/16/ P

42 Table of Contents Fold Hydraulics (2011-) P /16/14

43 Table of Contents Hydraulics Fold Hydraulics (2011-) Ref. Part No. Part Description Comments Revision dwg C C D C C C C C C C C C C C C D C C C C C C C C C C S C C C Image No. CYL 4X24X1.5 ROD(TIE)34.63C.L. EL 3/4MJIC 3/4MORB ORIFICE PLATE 1/16 3/4 HH1/2R /4FJIC HH1/2R /4FJIC HH1/2R /4FJIC CYL 4X24X1 1/2 ROD (TIE ROD) HH1/2R /4FJIC EL 3/4FJIC 3/4MJIC TE 3/4MJIC 3/4MJIC 3/4FJIC STROKE CONTROL VALVE TE 3/4FJIC 3/4MJIC 3/4MJIC TE 3/4MORB 3/4MJIC 3/4MJIC HYD BYPASS /W 2 PRESS REG HH1/2R /4FJIC HYD HOSE CLAMP BRACKET HH1/2R /4FJIC EL 13/16MFS 3/4MORB HH1/2R /4FJIC EL 13/16MFS 3/4MORB VALVE 3 SECT PRESS REDUCE W/BP AD 9/16MORB 1/4FNPT EL 3/4MORB X 3/4FORB FILTER INLINE 3/4MORB 3/4MJIC HH1/2R /4FJIC 3/4MORB HH1/2R /4MORB 3/4FJIC HG PAIR - RED MORB-FORB CP 3/4FORB MALE QD POPPET TYPE HHCS 5/16-18X3/4 GR5 WASHER LOCK SPRING 5/16 PLT Refer to Hydraulic Cylinder ( C for breakdown Refer to Hydraulic Cylinder ( C) for breakdown Used with Fertilizer Tanks Used without Fertilizer Tanks Used with Fertilizer Tanks Used without Fertilizer Tanks Used with Fertilizer Tanks Used without Fertilizer Tanks Refer to Hydraulic Hose Grips for breakdown 09/16/ P

44 Table of Contents Fold Hydraulics (2012+) P /16/14

45 Table of Contents Hydraulics Fold Hydraulics (2012+) Ref. Part No. Part Description Comments Revision dwg C C D C C C D C C C C C C C C C C C C C C C C C C C C C C C C S C C C C C D Image No. CYL 4X24X1.5 ROD(TIE)34.63C.L. EL 3/4MJIC 3/4MORB ORIFICE PLATE 1/8 8 MORB HH1/2R /4FJIC CYL 4X24X1 1/2 ROD (TIE ROD) TE 3/4MORB 3/4MJIC 3/4MJIC ORIFICE PLATE 1/16 3/4 TE 3/4MJIC 3/4MJIC 3/4FJIC STROKE CONTROL VALVE HH1/2R /4FJIC HH1/2R /4FJIC HH1/2R /4FJIC TE 3/4MJIC HH1/2R /4FJIC HH1/2R /4FJIC HH1/2R /4FJIC HH1/2R /4FJIC EL 3/4FJIC 3/4MJIC TE 3/4MJIC 3/4MORB 3/4MJIC HH1/2R /4FJIC VALVE 90 DEGREE SHUT-OFF EL 9/16MORB 3/4MORB VALVE PRESS REDUCING W/CHECK AD 3/4MORB 3/4FJIC PRESSURE GAUGE 3000PSI/200BAR AD 9/16MORB 1/4FNPT EL 3/4MJIC 9/16MORB SEAL KIT ENERGY 3" HYDRAULIC BYPASS VALVE HH1/2R /4FJIC HH1/2R /4FJIC 3/4MORB HG PAIR - RED MORB-FORB CP 3/4FORB MALE QD POPPET TYPE CR 3/4MJIC AD 9/16MORB 3/4MJIC HHCS 5/16-18X3/4 GR5 WASHER LOCK SPRING 5/16 PLT HYD HOSE CLAMP BRACKET Refer to Hydraulic Cylinder ( C) for breakdown Refer to Hydraulic Cylinder ( C) for breakdown Used with Fertilizer Tanks Used without Fertilizer Tanks Used with Fertilizer Tanks Used without Fertilizer Tanks Refer to Hydraulic Hose Grips for breakdown 09/16/ P

46 Table of Contents Lift Assist Hydraulics P /16/14

47 Table of Contents Hydraulics Lift Assist Hydraulics Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C C C C C C D Image No. CP 3/4FORB MALE QD POPPET TYPE HH1/2 R /4FJIC HH1/2R /4FJIC HH1/2R /4FJIC HH1/2R /4FJIC TE 3/4MJIC HH1/2R /4FJIC AD 3/4MJIC 3/8MNPT ONE-WAY RESTRICTOR VALVE TE 3/4FJIC 3/4MJIC 3/4MJIC HH1/2R /4FJIC EL 3/4MJIC 3/4MORB CYL 3 X 10 X 1 1/4 HHCS 5/16-18X3/4 GR5 WASHER LOCK SPRING 5/16 PLT HYD HOSE CLAMP BRACKET Used with Fertilizer Tank Option only Used with No Fertilizer Tank Option only Used with Fertilizer Tank Option only Used with No Fertilizer Tank Option only Refer to Hydrualic Cylinder ( C) for Breakdown 09/16/ P

48 Table of Contents Hydraulic Cylinder ( C) P /16/14

49 Table of Contents Hydraulics Hydraulic Cylinder ( C) Ref. Part No. Part Description Comments Revision dwg A0134 1M7021-ADI C C C 2S6570 2A0018 3R5412 4M6108 2A0024 5M6132 7M6332 6R5162-ADI C Image No. MW COTTER PIN MW ROD CLEVIS 1.00PN THD PIN CLEVIS 1 X 3 11/16 GR5 PLT HHCS 3/8-16X1 3/4 GR5 NUT HEX 3/8-16 PLAIN MW ROD MW WIPER MW U-CUP MW TIE ROD NUT MIDWAY HEAD BACK UP MIDWAY O-RING MIDWAY CROWN SEAL MIDWAY MW PISTON NUT SEAL MW PISTON MW PISTON NUT 1-14 MW TUBE 4 X 24 CYLINDER MW TIE ROD 4 X 24 CYLINDER MIDWAY ADI BASE CYL SEAL KIT C-5A6104 Available in item 20 only Available in item 20 only Available in item 20 only Available in item 20 only Available in item 20 only Available in item 20 only 09/16/ P

50 Table of Contents Hydraulic Cylinder ( C) P /16/14

51 Table of Contents Hydraulics Hydraulic Cylinder ( C) Ref. Part No. Part Description Comments Revision dwg C 2A C 1M7016-ADI C C 2M4418 2A0014 3R1412 4M4108 2A0024 5M4118 7M4318 6R1164-ADI Image No. CYL SEAL KIT MW (5A4104) 3 X 7 MW COTTER PIN NUT HEX 3/8-16 PLAIN MIDWAY HARDENED CLEVIS ADI PIN CLEVIS 1 X 3 11/16 GR5 PLT HHCS 3/8-16X1 3/4 GR5 MW ROD 1-1/4 DIA. X 10 STROKE MW WIPER U-CUP MW TIE ROD NUT MW HEAD 3X1-1/4 ROD PT.E BACK-UP MIDWAY O-RING MIDWAY CROWN SEAL MIDWAY MW PISTON NUT SEAL MW PISTON MW PISTON NUT 1-14 MW TUBE MW TIE ROD MIDWAY ADI BASE Available in item 1 only Available in item 1 only Available in item 1 only Available in item 1 only Available in item 1 only Available in item 1 only 09/16/ P

52 Table of Contents Hydraulic Cylinder ( C) P /16/14

53 Table of Contents Hydraulics Hydraulic Cylinder ( C) Ref. Part No. Part Description Comments Revision dwg A0134 1M7021-ADI C C C 2S6570 2A0040 2A0434 2A0018 3R5412 4M6108 2A0024 5M6132 7M6332 6R5162-ADI C D Image No. MW COTTER PIN MW ROD CLEVIS 1.00PN THD PIN CLEVIS 1 X 3 11/16 GR5 PLT HHCS 3/8-16X1 3/4 GR5 NUT HEX 3/8-16 PLAIN MW ROD MW WIPER MW U-CUP MW TIE ROD NUT MW HEAD BACK UP MIDWAY O-RING MIDWAY CROWN SEAL MIDWAY MW PISTON NUT SEAL MW PISTON MW PISTON NUT 1-14 MW TUBE 4 X 24 CYLINDER MW TIE ROD 4 X 24 CYLINDER MIDWAY ADI BASE CYL SEAL KIT C-5A6104 MOUNTING PLATE CYLINDER Available in item 20 only Available in item 20 only Available in item 20 only Available in item 20 only 09/16/ P

54 Table of Contents Hydraulic Hose Grips P /16/14

55 Table of Contents Hydraulics Hydraulic Hose Grips Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C C C C Image No. HG HANDLE - BLACK EXT HG HANDLE - RED EXT HG HANDLE - GREEN EXT HG HANDLE - YELLOW EXT HG HANDLE - GRAY EXT HG HANDLE - BLUE EXT HG HANDLE - BLACK RET HG HANDLE - RED RET HG HANDLE - GREEN RET HG HANDLE - YELLOW RET HG HANDLE - GRAY RET HG HANDLE - BLUE RET AD 3/4MORB 3/4FORB (HG) Used on return to tractor hose & Used on air drill fan hose. Used on field lift cylinders. Used on marker cylinders. Used on Hydraulic Drive. Used on fold cylinders. Used on transport lift cylinders. Used on return to tractor hose & Used on air drill fan hose. Used on field lift cylinders. Used on marker cylinders. Used on Hydraulic Drive. Used on fold cylinders. Used on transport lift cylinders. 09/16/ P

56 Table of Contents Fertilizer Drive Mounting P /16/14

57 Table of Contents Liquid Fertilizer Fertilizer Drive Mounting Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C C D C C C C H Image No. JB SETTING WRENCH PUMP, CDS-JOHN BLUE NGP-7055 SPKT 40B15 X 1 B W/KW & SS U-BOLT 5/8-11 X 6 1/32 X 5 3/4 HHCS 3/8-16X1 1/2 GR5 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT NUT HEX FLG LOCK 1/2-13 PLT WASHER FLAT 1/2 USS HARD PLT WASHER FLAT 3/8 USS PLT NUT MAC-LOK FLG 3/8-16 GR F IDLER 1 PC 38X1.01X1.062 SPACER HHCS 1/2-13X3 1/2 GR5 SPKT 40C15 X 7/8 HEX BORE PIN LINCH 3/16 X 1 9/16 LONG DECAL WARNING MOVING CHAIN FRAME EXTENSION 09/16/ P

58 Table of Contents Liquid Fertilizer Ground Drive Assembly P /16/14

59 Table of Contents Liquid Fertilizer Liquid Fertilizer Ground Drive Assembly Ref. Part No. Part Description Comments Revision dwg C D H C C C C C D S C C D C C C C C C C D C H H C C C D C C C S D H D V C S D C C D C C C C C C C C C D C C D D Image No. RHSNB 1/2-13X1 3/4 GR5 GROUND DRIVE WHEEL HUB BOLT ON GROUND DRIVE WHL WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT BRG, DUO-FACE W/SEAL LM67000LA BRG CUP LM GREASE ZERK STRAIGHT 1/4-28 4BOLT HUB TAPPERED ROL BRG 4BOLT HUB ASY TAPPERED ROL BRG RHSNB 1/2-13X1 1/2 GR5 NUT HEX JAM 1 1/4-12 PLT SHIELD GROUND DRIVE ARM WASHER LOCK SPRING 3/8 PLT HHCS 3/8-16X1 1/4 GR5 WASHER MACH 1.50 X 1.00 X 18GA PIN ROLL 1/4 X 1 1/2 LG PLT FLANGETTE 52 3-BOLT PLT BRG 7/8HEXX05OD SPH RHSNB 5/16-18X1 GR5 CHAIN RL # PITCHES NUT HEX FLG TP LK 5/16-18ZNYCR GROUND DRIVE ARM FERT DRIVE SPKT WLMT HHCS 1/2-13X3 1/2 GR5 WASHER FLAT 1/2 USS HARD PLT IDLER 1 PC 38X1.01X1.062 SPACER NUT HEX FLG LOCK 1/2-13 PLT PIN CLEVIS 1/2 X 1 3/4 PIN COTTER 1/8 X 1 1/4 PLT GND DRIVE SPRING ASY SPKT 40C15 7/8 HEX W/ SS HOLES MOUNT GROUND DRIVE 3 BOLT PIVOT CAST W/BRG SEAT BRG.880 HEX BORE 205DD SNAP RING INT 05 OD 3 BOLT PIVOT BRG ASSY SHAFT HEX 7/8 X 12" LONG SPKT 40C47 X 7/8 HEX BORE PIN LINCH 3/16 X 1 9/16 LONG CHAIN RL #40 99 PITCHES HHCS 1/2-13X1 3/4 GR5 HHCS 1/2-13X9 1/2 GR5 DECAL WARNING MOVING CHAIN DECAL REFLECTOR AMBER 1 1/2X9 DECAL AG CHEMICALS DANGER PLUG, SPRING ROD CASTING HHCS 1/2-13X10 SPTHD GR8 DRV WHL SPRING TRUNION CASTING SPRING COMP 2 1/2ODX3/8X12 7/8 SPRING STOP STAMPING SMALL NUT HEX FLANGE 1/2-13 GR G PLT NUT HEX JAM 1/2-13 PLT ADJ. YOKE END SHAFT HEX 7/8 X 8 LONG Includes items 6-9 Includes items Includes items /16/ P

60 Table of Contents Fertilizer Plumbing to Tanks P /16/14

61 Table of Contents Liquid Fertilizer Fertilizer Plumbing to Tanks Ref. Part No. Part Description Comments Revision dwg R C C C C C D C C D V C C C C C C C R C C C C C C C D C C C C C C C C C C C C C C C C H D D C Image No. HOSE 3/8 ID 150PSI EPDM EL 3/4MNPT X 3/8HB POLYPROP VALVE RELIEF PSI POLYP AD 1 1/2MNPT X 3/4FNPT POLYP GAUGE 100 PSI 4IN STAINLESS ST SRHMS 5-40X5/8 SS GAUGE PROTECTOR TOP DIAPHRAGM - GAUGE PROTECTOR DECAL NOTICE GAUGE PROTECTOR GAUGE PROTECTOR BOTTOM GAUGE PROTECTOR ASSY AD 1/4MNPT CLOSE X 7/8 SS AD 3/4MNPT X 1/4FNPT POLYPROP CR 1 1/2FNPT AD 1 1/2MNPT POLYPROP EL 1 1/2MNPT X 1 1/2FNPT POLYP AD 1 1/2MNPT X 1 1/2HB POLYP CLAMP WRM DRV#36SS ( ) HOSE 1 1/2 ID 150PSI EPDM AD 1 1/2MNPT X 1 1/2HB H SAVER 2" VALVE GASKET AD 1 1/2MNPT X 1HB POLYPROP GASKET 1 1/2 CAM-LOCK CP EPDM CLAMP 2" BANJO FLANGE STRAINER BANJO MLST MESH VALVE 1 1/2 MANI 3 WAY BALL ANGLE - 1 1/2 B VALVE SUPPORT HHCS 5/16-18X1 GR5 WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 SS WASHER FLAT 5/16 SAE PLT WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT EL 1 1/2 FLANGE POLY EL 1 1/2 FLANGE 45 DEG POLY AD 1 1/2 FLG X 1 1/2 MNPT POLY VALVE - 1 1/2FNPT X 2FCL POLYP PL 2MCL POLY-GLASS EL 1 1/2 FLANGE X 1 1/2HB POLY DECAL VALVE SELECTOR HHCS 1/2-13X1 1/4 GR5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT HOSE CLAMP WELDMENT QUICKFILL MOUNT DUST PLUG CHAIN 10 PIN HAIR COTTER.094 Includes items 6-10 Refer to Banjo Strainer ( C) for breakdown Refer to Ball Valve Assembly ( C) for breakdown 09/16/ P

62 Table of Contents Tank Fertilizer Plumbing P /16/14

63 Table of Contents Liquid Fertilizer Tank Fertilizer Plumbing Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C R Image No. EL 1 1/2MNPT X 1 1/2FNPT POLYP AD 1 1/2 FLG X 1 1/2 MNPT POLY CLAMP 2" BANJO FLANGE GASKET 1 1/2 CAM-LOCK CP EPDM EL 1 1/2 FLANGE X 1 1/2HB POLY VALVE 1 1/2 MANI 3 WAY BALL TEE 1 1/2 FLANGE POLY AD 2"FLANGE X 1 1/2 HB CLAMP WRM DRV#28 SS( ) HOSE 1 1/2 ID 150PSI EPDM 09/16/ P

64 Variable Rate Kit Table of Contents P /16/14

65 Table of Contents Liquid Fertilizer Variable Rate Kit Ref. Part No. Part Description Comments Revision dwg C D C C C C C C C C C C C C C C C C C R R C C C C Image No. U-BOLT 1/2-13 X 6 1/32 X 5 1/4 PLATE MOUNT RAVEN 4 SECT VALVE WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT EL 1 FLANGE X 1HB POLY GASKET 1 MANIFOLD M100G EPDM CLAMP 1 BANJO FLANGE CLAMP WRM DRV #16 SS ( ) RAVEN PRESSURE SENSOR HHCS 1/4-20X5/8 GR5 WASHER LOCK SPRING 1/4 PLT EL 1/4MNPT X 1/4FNPT POLYP RAVEN 3-SECT BOOM VALVE GASKET 1 1/2 CAM-LOCK CP EPDM CLAMP 2" BANJO FLANGE RAVEN RMF-60 FLOWMETER RAVEN 1 1/2 POLY CONTROL VALVE EL 1 1/2 FLANGE X 1 1/2HB POLY CLAMP WRM DRV#36SS ( ) HOSE 1 1/2 ID 150PSI EPDM HOSE 1 ID 200PSI EPDM RAVEN PRESS SENS 12' CABLE RAVEN PRESS SENS 10' CABLE RAVEN 10' 450 CONSOLE CABLE RAVEN 12' 440 FLOW CABLE MANI 09/16/ P

66 Table of Contents Fertilizer Wet Boom P /16/14

67 Table of Contents Liquid Fertilizer Fertilizer Wet Boom Ref. Part No. Part Description Comments Revision dwg C C C S C C C C C C D C C C R D C C R D D D D D D D D D K K K K K K K C C C C C C C C C Image No. NOZZLE BODY 3/4 WET BOOM CLAMP NOZZLE CAP QUICK X 90X1/4 FNPT AD 1/4MNPT X 3/8HB POLYPROP NOZZLE ASSEMBLY - 3/8 HOSE U-BOLT 1/4-20 X X 2 RND EL 3/4FNPT POLYPROP U-BOLT 3/8-16 X 6 1/32 X 5 PLT CA 3/4FNPT POLYPROP NOZZLE SHUT OFF CAP W/ GASKET AD 3/4MNPT X 1HB POLYPROP MANIFOLD BRACKET NUT LOCK 3/8-16 PLT NUT LOCK 1/4-20 PLT CLAMP WRM DRV #6 SS ( ) HOSE 3/8 ID 150PSI EPDM MANIFOLD 4 HOLE TEE 3/4FNPT POLYPROP CLAMP WRM DRV #16 SS ( ) HOSE 1 ID 200PSI EPDM MANIFOLD 2 HOLE MANIFOLD BRKT SHORT 4 OUTLET MANIFOLD NP4000 MANIFOLD 2 HOLE NP4000 MANIFOLD 3 HOLE WING MANIFOLD MOUNT 2ND PRDCT MNFLD, 8 OUTLET MANIFOLD BRACKET SHORT MANIFOLD 4 HOLE NP OUTLET BOOM KIT NP OUTLET BOOM KIT CNTR NP OUTLET BOOM KIT NP OUTLET BOOM KIT NP OUTLET BOOM KIT NP4K 8 OUTLET BOOM KIT 4 OUTLET BOOM KIT PL 3/4MNPT POLYPROP ORIFICE SPR SYS CP SS ORIFICE SPR SYS CP SS ORIFICE SPR SYS CP SS ORIFICE SPR SYS CP SS ORIFICE SPR SYS CP SS ORIFICE SPR SYS CP NOZZLE HI-VERIFLOW1 NOZZLE VERIFLOW1 Includes items 1-3 Mounted on Rear Center Section Frame Mounted on Front Center Section Frame Mounted on Front Inner Wings Mounted on Front Outer Wing Right Hand Mounted on Front Outer Wing Left Hand Mounted on Rear Inner Wings Mounted on Rear Outer Wings Full Flow SHOWN Half Flow 09/16/ P

68 Hydraulic Pump Table of Contents P /16/14

69 Hydraulic Pump Table of Contents Liquid Fertilizer Ref. Part No. Part Description Comments Revision dwg D C C C C C C C C C C C C C C C R C C S C C R D C Image No. NP ACE PUMP MOUNT CLAMP WRM DRV#28 SS( ) CLAMP T-BOLT STRAP ( ) HHCS 3/8-16X1 1/2 GR5 NUT HEX 3/8-16 PLT NUT HEX FLANGE 3/8-16 PLT WASHER LOCK SPRING 3/8 PLT U-BOLT 3/8-16 X 6 1/32 X 7 AD 1/2MNPT 3/4FORB GASKET 1 1/2 CAM-LOCK CP EPDM 2" VALVE GASKET CLAMP 2FP BANJO FLANGE EL 1 1/2 FLANGE X 1 1/2HB POLY CLAMP 2" BANJO FLANGE EL 2FP FLANGE X 1 1/2HB POLY PUMP, ACE CENTRIFIGAL HYD DRV HOSE 1 1/2ID EPDM SUCTION HOSE HH1/2 R /4MORB 3/4MORB90 HH1/2 R /4MORB 3/4MORB90 HG PAIR - BLACK MORB-FORB CP 3/4FORB MALE QD POPPET TYPE AD 1/8MNPT 3/16 HOSE BARB HOSE 1/4 OD 3/16 ID - EVA MOUNT HOSE AND 7 PIN HOLDER U-BOLT 3/8-16 X 6 1/32 X 5 PLT Refer to Hydraulic Pump Assembly for breakdown Used with Fertilizer Tank Option only Used without Fertilizer Tank Option only Refer to Hydraulic Hose Grips for breakdown 09/16/ P

70 Table of Contents Hydraulic Pump Assembly P /16/14

71 Table of Contents Liquid Fertilizer Hydraulic Pump Assembly Ref. Part No. Part Description Comments Revision dwg31965 Image No. BAC-53 ACE PIPE PLUG ACE 18 NPT PLUT SS BAC FLG ACE VOLUTE 1-1/2NPT X 1-1/4NPT C NUT HEX 3/8-24 PLT BAC-24-HYD-SS ACE 3/8" WASHER BAC P ACE IMPELLER, VALOX, KEYWAY BAC CI ACE IMPELLER, CAST IRON KEYWAY BAC-7V ACE MECHANICAL, VITON & BAC-7SC ACE SILICON CARBIDE & BAC ACE O-RING VOLUTE SEAL BAC HYD ACE MOUNTING FRAME (200 SERIES ACE 3/8X3/4 BOLT ACE 3/8X3/4 BOLT SS OPTIONAL BAC-54 ACE PUMP SLINGER BAC-33 ACE PUMP INTERNAL SNAP RING BAC-37 ACE PUMP SEALED BALL BEARING BAC-32 ACE PUMP EXTERNAL SNAP RING BAC-32-S ACE SPACER BACH-25 ACE 1/8"X1/8"X1/2" KEY BAC-6-HYD-SS ACE SHAFT, 5/8 DIA, KW & TANG S200 ACE SEAL SPPRT SPCR (200SERIES A MOTOR, ACE HYD DRV UPDATE KIT CAP SCREW, 5/16" N.C. x 3-3/4" ACE O-RING SHAFT SEAL RK-FMC-150 ACE REPAIR KIT FMC-(150 SERIES RK-BAC-75-HYD-L SEAL KIT FOR BAC-75-HYD-296 BAC-78-8SAE REV CK VALVE ASY FOR C O-RING ORIFICE INSERT C BAC-80-8SAE AD RESTRICTOR BODY C BAC-76-HYD ACE COUPLING FOR HYD MOTOR O-RING, #8 SAE FITTING C FLOW LIMITER VALVE- ACE LS206N 09/16/ P

72 Table of Contents John-Blue Pump ( C) P /16/14

73 Table of Contents Liquid Fertilizer John-Blue Pump ( C) Ref. Part No. Part Description Comments Revision dwg Image No. REPAIR KIT JB FOR C SUCTION VALVE FOR JB C DISCHGE VALVE JB FOR C SETTING HUB SETTING POINTER FOR JB CDS JOHN-BLUE SLIDE RULE JB SETTING WRENCH 09/16/ P

74 Table of Contents Ball Valve Assembly ( C) P /16/14

75 Table of Contents Liquid Fertilizer Ball Valve Assembly ( C) Ref. Part No. Part Description Comments Revision dwg C C C Image No. HHCS 1/4-20X1/2 GR5 WASHER FLAT 1/4 USS PLT VALVE - 1 1/2FNPT X 2FCL POLYP 09/16/ P

76 Table of Contents Banjo Strainer Assembly ( C) P /16/14

77 Table of Contents Liquid Fertilizer Banjo Strainer Assembly ( C) Ref. Part No. Part Description Comments Revision dwg31954 MLST150-H LST1580 LST-1550 LST150-G LST150-B LSQ200-R LSQ200-PL Image No. HEAD FOR BANJO C SCREEN FOR STRAINER C BANJO SCREEN 50M GASKET FOR C BANJO 1 1/2 FLG T-STRAIN BOWL BANJO GASKET/O-RING PLUG FOR BANJO C Used with 80 Mesh Used with 50 Mesh 09/16/ P

78 Decal Placement Table of Contents P /16/14

79 Table of Contents Decals Decal Placement Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C C C C C C C C C C C D C D C C C Image No. DECAL CAUTION GENERAL INSTR DECAL DANGER ELECTROCUTION HA DECAL CAUTION OPERATIONAL MACH DECAL WARNING 20 MPH TRANS SML DECAL DANGER CRUSH TRCTR & 3PT DECAL WARNING HIGH PRESSUR LRG DECAL GP&LOGO HARVEST/3X20 STR DECAL REFLECTOR AMBER 1 1/2X9 DECAL REFLECTR DAYTIME 1 1/2X9 DECAL REFLECTOR RED 1 1/2X9 DECAL CAUTION TRANSP. LOCK DECAL NP4000 DECAL GP PLANTING COMPONENTS DECAL WARNING TOWING DECAL AG CHEMICALS DANGER MANUAL PAK 2 1/4 THK NUT LOCK 1/2-13 PLAIN HHCS 1/4-20X1 GR5 NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT MANUAL PAK MOUNT U-BOLT 1/2-13 X 4 1/32 X 7 1/4 DECAL MOUNT MINI END WHEEL PRESS WHEEL DECAL APPLICATOR CAUTION LIST DECAL NUTRI-PRO 09/16/ P

80 Table of Contents The is a numeric index of all part numbers included in this manual. The index shows what page(s) the part is used on. Part Number Page Part Number Page Part Number Page Part Number Page , D D D...27, D S D D D D H D...27, D D D...37, D D D D D D V V H D...43, D M7016-ADI M7021-ADI...49, D V D D H S H H H H D D D D S D K D K H H H D D D D A A , 53 2A , 51, 53 2A A , 49, 51, 53 2A M S , R R , H D S H H H H H H H D H D...57, S D D D D D D D D D D H H H H H S H S H H...21, 23, H D D D...27, H H...7, D...27, D...27, H H H H H H H H H H K H H K K K K K D K K D D H D D D D D D H D H D D D...27, D K D D D D H H H H H H D S D D H H H H H D D D D H H...23, H H H S...23, M M , D D...43, 45, D V D D A S S...43, D D H K S H D H M M , 53 6R1164-ADI R5162-ADI...49, 53 7M M , C...31, 37, C C C...65, C...63, C...27, C C...37, C...9, C C C...61, C C...27, REKIT C...27, C C C C C...27, C C...43, 45, C C...10, 27, C C...57, C...31, 49, 51, C...31, C C...57, C C...13, C...9, C C C C C...21, 23, C...39, C C...37, C C...9, C...27, C...15, C C C C C C C C C C...21, 23, C C C C C C C C C C P /16/14