Parts Manual YP1630F. Yield-Pro Planter. Copyright 2017 Printed 10/11/ P

Transcription

1 Table of Contents Part Number Index Parts Manual Yield-Pro Planter YP1630F Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! Cover illustration may show optional equipment not supplied with standard unit. Copyright 2017 Printed 10/11/ P

2 Table of Contents Table of Contents Part Number Index Section 1: Introduction...4 Using This Manual...4 Manual Replacement Information...4 Manual Revisions...4 Touch-up Paint...4 Hardware Legend...5 Replacement Hardware...5 Serial Numbers...5 Part Number Service Coding...5 Frame...6 Tongue...6 Mainframe...8 Walkboard...12 Hopper to Frame...16 Hopper Assembly...18 Fan to Frame...20 Hose Support Tubes...22 Dry Fertilizer Delivery...24 Fertilizer Meter Assembly...26 Fertilizer Tower Assembly...28 Lights...30 Transport...32 Transport Wheels...32 Gauge Wheels...34 Brakes...37 Air Brakes...38 Hydraulic Brakes...40 Brake Assembly...42 Drive...44 Wing Drive and Sprocket Tree Mounting...44 Wing Ground Drive ( K)...46 Fertilizer Meter Drive...50 Fertilizer Ground Drive ( K)...54 Opener...57 Parallel Arm & Hopper Support...58 Spring Assembly...60 Shank Assembly...62 Adjustment Assembly...64 Disk & Scraper...66 Side Gauge Wheel...68 Side Gauge Wheel & Disk Assembly...70 Seed Hopper...72 Treatment Hopper...74 Seed Hopper Drive...76 Treatment Hopper Drive...78 Treatment Hopper Granular Meter...80 Treatment Granular Meter Assembly...82 Treatment Tube Diffuser...84 Coulter...86 Conservation Coulter Series Keeton Seed Firmer (Option)...90 Seed Lok 6" Assy. ( K)...92 Brush Meter FP Corn Meter ( C) 12FP Sunflower Meter ( C)...96 Press Wheels...98 Dual Press Wheel Assembly D Cast Press Wheels Spider Press Wheel Assembly Hydraulics Fold And Marker Hydraulics Lift Hydraulics Fan Hydraulics Hydraulic Hose Grips Hydraulic Cylinder ( C 1.5x2.5x.75 Rod) Hydraulic Cylinder ( C 3x24x1.5 Rod) Hydraulic Cylinder ( C 4.75x20x1.75 Rod) Hydraulic Cylinder ( C 4.5 x x 1.5 Rod) Hydraulic Cylinder ( C 5.0 x 10 x 2.0 Rod) Hydraulic Cylinder ( C 4.25x27.75x2.00 Tie) Fasse 3 Way Multiplier ( C) Sequence Valve ( C) Monitor Monitor Marker Marker Marker Disc Assembly ( S) Part Number Index Copyright 2017 All rights reserved Printed 10/11/17 Great Plains Manufacturing, Inc. provides this publication as is without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. Great Plains Manufacturing, Incorporated Trademarks The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains All other brands and product names are trademarks or registered trademarks of their respective holders. Printed in the United States of America P /11/17

3 Table of Contents Part Number Index Alphabetized Table of Contents Selected Models D Cast Press Wheels FP Corn Meter ( C) 12FP Sunflower Meter ( C) Series Keeton Seed Firmer (Option)...90 A Adjustment Assembly...64 Air Brakes...38 B Brake Assembly...42 Brush Meter...94 C Conservation Coulter...88 Coulter...86 D Disk & Scraper...66 Dry Fertilizer Delivery...24 Dual Press Wheel Assembly...98 F Fan Hydraulics Fan to Frame...20 Fasse 3 Way Multiplier ( C) Fertilizer Ground Drive ( K)...54 Fertilizer Meter Assembly...26 Fertilizer Meter Drive...50 Fertilizer Tower Assembly...28 Fold And Marker Hydraulics M Mainframe...8 Marker Marker Disc Assembly ( S) Monitor P Parallel Arm & Hopper Support...58 S Seed Hopper...72 Seed Hopper Drive...76 Seed Lok 6" Assy. ( K)...92 Sequence Valve ( C) Shank Assembly...62 Side Gauge Wheel...68 Side Gauge Wheel & Disk Assembly...70 Spider Press Wheel Assembly Spring Assembly...60 T Tongue...6 Transport Wheels...32 Treatment Granular Meter Assembly...82 Treatment Hopper...74 Treatment Hopper Drive...78 Treatment Hopper Granular Meter...80 Treatment Tube Diffuser...84 W Walkboard...12 Wing Drive and Sprocket Tree Mounting...44 Wing Ground Drive ( K)...46 G Gauge Wheels...34 H Hopper Assembly...18 Hopper to Frame...16 Hose Support Tubes...22 Hydraulic Brakes...40 Hydraulic Cylinder ( C 1.5x2.5x.75 Rod) Hydraulic Cylinder ( C 3x24x1.5 Rod) Hydraulic Cylinder ( C 4.75x20x1.75 Rod) Hydraulic Cylinder ( C 4.5 x x 1.5 Rod).118 Hydraulic Cylinder ( C 5.0 x 10 x 2.0 Rod) Hydraulic Cylinder ( C 4.25x27.75x2.00 Tie) Hydraulic Hose Grips L Lift Hydraulics Lights /11/ P

4 Table of Contents Part Number Index P /11/17

5 Table of Contents Part Number Index 10/11/ P

6 Tongue Table of Contents Part Number Index P /11/17

7 Tongue Table of Contents Part Number Index Frame Ref. Part No. Part Description Comments Revision dwg H H H H H H D D H H H C C C C C C C C C D D C C C C C C C C C C C C C C C C C H C C H C D C C C C Image No. 16R PB TONGUE FRONT SECT WLDMT 16R PB TONGUE REAR SECT WLD PULLBAR WELDMENT 16 ROW TONGUE ROLLER BUSHING WELDMENT ROLLER PIN WLDMT TELESCOPING HITCH SAFETY LATCH DRAFT HOOK PIN 1.5 X 9.19 PARKING SUPPORT PIN PARKING STAND WELDMT SWIVEL COUPLER WELDMENT HITCH CROSSBAR WLDMT PIN HITCH 1 7/16 X 8 3/8 PLT HHCS 1 1/4-7X9 1/2 GR5 SPTHD PIN COTTER 1/4 X 2 1/2 PLT WASHER FLAT 1 SAE DECAL DANGER CRUSH TRCTR & 3PT WASHER LOCK 1 1/4 SPRING PLT NUT HEX 1 1/4-7 PLT MIDWAY ROD CLEVIS 3/4-16 UNF CYL 1.5X2.5X.75 ROD (TIE ROD) SPACER TUBE FOR PLANTER HITCH INNER HITCH PIVOT TUBE HHCS 1/2-13X1 1/2 GR NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT PIN CLEVIS 1 X 2 3/4 USABLE LG PIN LYNCH 3/16 X 1 9/16 LONG PIN ROLL 1/4X1 3/4 PIN CLEVIS 5/8 X 2 1/2 PLT PIN COTTER 1/8 X 1 1/4 PLT WASHER FLAT 5/8 SAE PLT GREASE ZERK STRAIGHT 1/4-28 DECAL GP&LOGO HARVEST/3X20 STR PIN LYNCH 1/4 X 1 3/4 PLT WASHER FLAT 3/4 SAE PLT PIN HITCH 1 1/4 X 4 1/2 WASHER FLAT 1 1/4 SAE PLT PIN CLEVIS 5/8 X 3 1/2 DECAL 3 COLOR STRIPE 2.50 WIDE SWIVEL HOSE POST WASHER FLAT 1 1/2 SAE PLT HOSE WRAP X 24LG VELCR YP HITCH PARK SUPPORT STAND PIN WIRE SNAP LOCK 3/8 X 2 1/2 20P CAT3 HITCH PIN BUSHING DECAL WARNING 20 MPH TRANS LRG DECAL WARNING HIGH PRESSUR SML DECAL YP FOLD INSTRUCTIONS DECAL YP FOLD CAUTION 10/11/ P

8 Mainframe Table of Contents Part Number Index P /11/17

9 Mainframe Table of Contents Part Number Index Frame Ref. Part No. Part Description Comments Revision dwg H C H C D C H H H C C C H C D D C C C D C C C D H H C C C C C D C H C D C C C C D C C C C D D C D C H C D C C Image No. PULLBAR WELDMENT 16 ROW NUT HEX 1 1/2-6 PLT 16 ROW PULLBAR ADJUSTER PIN 1 X 4 1/2 USEABLE WASHER - SAFETY CHAIN SA PIN ROLL 3/16 X 1 3/4 PLT. HOSE SUPPORT WELDMENT 16R PB LH WING FRAME WLDMT 2 16R PB RH WING FRAME WLDMT 2 BUSHING 3 X 2 1/2 X 2 CONNEX GREASE ZERK STRAIGHT 1/4-28 CYL REP 4.75X20.0X1.75 (RET) 16R PB TONGUE REAR SECT WLD 2 HHCS 1-8X1 3/4 GR5 NYL WASHER 3.5ODX1.03ID.38THK. TOOLBAR HORZ PIVOT PIN HHCS 5/16-18X1 1/4 GR5 WASHER LOCK SPRING 5/16 PLT CLAMP, COATED 2ID, 5/16 BOLT HYD HOSE CLAMP BRACKET HOSE CLIP 13/16 ID PIN 3/4 X 4 13/32 USEABLE PIN ROLL 1/4X1 3/4 WASHER HARD 4 X 2.56 X.25 16R PB LH TOOLBAR WLDMT 2 16R RH TOOLBAR WLDMT 2 GREASE ZERK 1/4-28 X 90-DEG BUSHING 2 1/4 OD X 2 ID X 2 LG HHCS 3/4-10X5 GR5 NUT LOCK 3/4-10 PLT HHCS 1/4-20X8 GR5 PLT HOSE ROUTING BRACKET NUT HEX FLANGE 1/4-20 PLT TRANSPORT SUPPORT HOOK WLDMT PIN ROLL 3/8 X 2 1/2 PLT TRANSPORT HOOK PVT SHAFT 1.25 SPRING COMP 1.46OD.148WX4.0LG PIVOT THRUST WASHER STEEL BUSHING 3 1/4X3IDX3LONG U-BOLT 3/8-16 X 7 1/32 X 7 7/8 HOSE HOLD DOWN CLAMP WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT PIN COTTER 5/16 X 2 1/2 NUT HEX SLOTTED 1 1/4-7 BOX HINGE PIVOT WASHER YP1630F SWIVEL PIN PIN CLEVIS 5/8 X 3 1/2 PLANTER REAR CROSS PIN 2 PIN COTTER 1/8 X 1 1/4 PLT FRONT FRAME WELDMENT DECAL GP & LOGO X24 STRI CYLINDER GUIDE BAR 2 HHCS 1/2-13X8 GR5 NUT HEX SIDE LOCK 1-8 PLT Refer to Hydraulic Cylinder ( C) for breakdown (S/N C1110N-) 10/11/ P

10 Table of Contents Mainframe (continued) Part Number Index Ref Part No C C C C H C H C C H C D C C C C C C C C H C D D Part Description CYL REP 5X10X2.0 ROD (TIE) WASHER MACH 1 7/8X1 1/4X 14GA BUSHING,1 1/2X1 1/4X3/4LG BUSHING SPINDLE 1 1/2X1 1/4X1 LIFT LINK WELDMENT 2 PIN 3/8 X 3 USABLE LW/PIN CYL LOCK CHANNEL 2 X 9 1/2 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT LIFT LUG PIVOT WLDMT 2 HHCS 3/4-10X2 1/2 GR5 2SNT AXLE TOP HALF BAND WASHER FLAT 3/4 SAE PLT NUT LOCK 3/4-10 PLT DECAL YIELD-PRO PIN CLEVIS 1 1/4 X 6 7/8 USBL PIN COTTER 5/32 X 1 1/2 LONG HHCS 1-8X3 GR8 WASHER LOCK SPRING 1 PLT NUT HEX 1-8 PLT REAR FRAME WELDMENT WASHER FLAT 1 USS PLT PIVOT PIN ANTI ROTATE WASHER TOOLBAR PIVOT PIN LONG Comments Revision Refer to Hydraulic Cylinder ( C) for breakdown (S/N C1111N+) (S/N C1111N+) (S/N C1111N+) P /11/17

11 Table of Contents Part Number Index Frame Mainframe (continued) This Page Intentionally Left Blank 10/11/ P

12 Walkboard Table of Contents Part Number Index P /11/17

13 Walkboard Table of Contents Part Number Index Frame Ref. Part No. Part Description Comments Revision dwg H C C C C H C C C C D C C C C C C C C C H D C H C H D C H C C D D D H C D D C C C C C C D C C C C C C C C C C C D Image No. STEP SINGLE BOLT-ON STEP EXTENSION RUBBER NUT LOCK 1/2-13 PLT WASHER FLAT 1/2 SAE PLT HHCS 1/2-13X1 1/2 GR5 LADDER WELDMENT DECAL DO NOT RIDE DECAL FALLING WARNING NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT WALKBOARD SUPPORT BRKT NUT LOCK 3/8-16 PLT WASHER FLAT 3/8 HARD ASTMF436 NUT HEX 7/16-14 PLT WASHER LOCK 7/16 PLT WASHER FLAT 7/16 USS GR8 U-BOLT 1/2-13 X 4-1/32 X 6 PLT DECAL WARNING AD FAN HAZARD DECAL REFLECTR DAYTIME 1 1/2X9 HHCS 3/8-16X2 GR5 100 BU HOPPER MOUNT SDS LADDER GRAB RAIL TUBE CAP 1 1/4 ID TB X 3 LG PLATFORM WELDMENT HHCS 7/16-14X1 1/4 GR5 PLT HANDRAIL WELDMENT 11" WIDE 6 BOLT LOCKOUT PLUNGER SPRING COMP 1/2 OD X 1 LG DROP RAIL WELDMENT PIN ROLL 3/16 X 2 1/2 LG. PTL. WASHER FLAT 3/8 USS PLT WALKBOARD LADDER PIVOT BUSHING TOP RAIL MIDDLE SECTION RAIL PIVOT RH HOOP HANDRAIL WELDMENT HHCS 3/8-16X1 1/4 GR5 HAND RAIL TIE BAR COSMETIC DECAL PLATE DECAL GP ON LOGO HARVEST SML DECAL YP-1630 MANUAL PAK 1" W/ GASKET NUT HEX FLG TL 1/4-20 ZNYCR MINI END WHEEL PRESS WHEEL HHCS 1/4-20X1 GR5 YP SMV MANUAL PAK HANGER HHCS 5/16-18X3/4 GR5 HHCS 7/16-14X1 GR5 SMV MOUNTING BLADE WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT DECAL SLOW MOVING-GALV. BACKED SCREW RD HD 1/4-20 X 5/8 WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT WASHER FLAT 7/16 SAE PLT HHCS 3/8-16X2 1/2 GR5 RAIL PIVOT LH 10/11/ P

14 Table of Contents Walkboard (continued) Part Number Index Ref Part No C C Part Description DIGITAL SCALE 50 LB/23 KG ADC2350 CALIBRATION BAG Comments Revision P /11/17

15 Table of Contents Part Number Index Frame Walkboard (continued) This Page Intentionally Left Blank 10/11/ P

16 Hopper to Frame Table of Contents Part Number Index P /11/17

17 Table of Contents Part Number Index Frame Hopper to Frame Ref. Part No. Part Description Comments Revision dwg C H C C C C C C C H C D C C C C H C C C C C C C C C C Image No. PIN HITCH 1/2 X 6 1/4 W CHAIN 100 BU HOPPER MOUNT SDS NUT HEX 5/8-11 PLT WASHER LOCK SPRING 5/8 PLT WIRING AND TUBE CLIP WASHER LOCK SPRING 5/16 PLT DECAL REFLECTOR AMBER 1 1/2X9 HHCS 5/16-18X5/8 DECAL CAUTION TIRES NOT A STEP UNIVERSAL HOPPER MOUNT FRAME HHCS 5/16-18X3/4 GR5 HYD HOSE CLAMP BRACKET HHCS 5/8-11X1 3/4 GR5 NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1/2 SAE PLT HOOP WELDMENT HOPPR HLDDWN HHCS 1/2-13X1 1/2 GR5 DECAL WARNING EYES & BREATHING DECAL NOTICE AIR LEAKS DECAL AG CHEMICALS DANGER DECAL WARNING AD BIN HAZARDS DECAL MOVING GEARS DECAL METER GEAR RANGE REVERSE DECAL CLEAN OUT DOOR PICTURE DECAL CALIBRATION DOOR PICTURE WASHER FLAT 5/8 USS PLT 10/11/ P

18 Hopper Assembly Table of Contents Part Number Index P /11/17

19 Table of Contents Part Number Index Frame Hopper Assembly Ref. Part No. Part Description Comments Revision dwg C C C D H C C C C C C D H H C H C D H C C H C C C C D C C H C C C H C C D K C C C D D H Image No. HHCS 3/4-10X8 GR5 PLT WASHER FLAT 3/4 SAE PLT FLNG BUSHING 1 1/8 X 1 X 3/4 LID SWIVEL INNER PIVOT TUBE LID SWIVEL WELDMENT HHCS 1/2-13X2 1/4 GR5 SPRING COMP DIE.75X.375X1.50L NUT LOCK 3/8-16 NYLON INSERT WASHER FLAT 3/8 SAE PLT SCR HX SKT BUT CP 3/8-16X2 1/2 NUT HEX NYLOCK 1/2-13 BIN LID TOP CROSS BAR AIR DRILL BIN LID HANDLE WLMNT ROUND BIN LID WELDMENT HHCS 1/2-13X2 3/4 GR5 AIR DRILL BIN LID HOOK PIN ROLL 1/2 X 1 3/4 ADC2350 BIN LID SEAL STRAINER BASKET WELDMENT RHSNB 3/8-16X1 1/2 GR5 U-BOLT 3/8-16 X 2 5/8 X 3 1/4 BIN LID FLANGE WLMT NUT HEX 3/4-10 PLT NYLOCK 100 BU SEED HOPPER-NO LID WASHER FLAT 3/8 NEOPRENE PLT NUT FLANGE LOCK 3/8-16 PLT BIN LID HINGE SUPPORT PLATE WASHER FLAT 3/8 USS PLT HHCS 3/8-16X1 1/4 GR5 BIN LADDER UPPER CLAMP WELDMT WASHER FLAT 5/16 USS PLT NUT HEX NYLOCK 5/16-18 PLT U-BOLT 5/16-18X1 1/2X2 1/2 RND LADDER AIR DRILL BIN 601/2 LNG NUT HEX FLG TP LK 5/16-18ZNYCR HFSS 5/16-18X1 GR5 PLT PLASTIC BIN BOTTOM PLATE YP16F FERTILIZER METER ASM SILICON 35YR CLEAR 10 OZ HHCS 1/4-20X1 SS WASHER FLAT 1/4 HARD ASTMF436 EXTENSION TUBE COUPLER EXTENSION TUBE METER BOX SPACER Refer to Meter Box Assembly for breakdown 10/11/ P

20 Fan to Frame Table of Contents Part Number Index P /11/17

21 Fan to Frame Table of Contents Part Number Index Frame Ref. Part No. Part Description Comments Revision dwg C C H C C S C D C C C C C C C C C C C H C C C Image No. 6 HYD FAN W/CASE DRAIN MOTOR SCREW HEX 5/16-12X3/4 THD FRM FAN OUTLET TRANSITION AD 1/4FNPT 1/4HOSE BARB FAN INLET RAIN SHIELD DJ FAN RPM SENSOR THRD HALL FLEX GUARD HOSE.594 OD X.413ID DJ FAN SENSOR MOUNT BRKT SCREEN FAN COVER SCREW HEX SELF TAP 1/4-20X3/4 FLAT WASHER 1/4 HFSS 1/4-20X1 GR5 6 FAN HOUSING RH SIDE BUSHING, JA X 20 MM 13 FAN IMPELLER 6 FAN HOUSING LH SIDE NUT HEX FLANGE 1/4-20 PLT HHCS 3/8-16X1 1/4 GR5 HUB/MOTOR PLATE SEAL (2B) CRARY FAN MOTOR B MOUNT PLATE SCREW HEX SELF TAP 1/4-20X3/4 PARKER F-11 FAN MOTOR WASHER FLAT 3/8 SAE PLT WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT YP FAN MOUNT WLDMNT 2 HHCS 3/8-16X1 GR5 CLAMP BAND 1 1/2 LONG CAP 2 1/2 OD TUBE 1 1/2 LONG Includes items: /11/ P

22 Table of Contents Hose Support Tubes Part Number Index P /11/17

23 Table of Contents Part Number Index Frame Hose Support Tubes Ref. Part No. Part Description Comments Revision dwg C D C C C C C H D C C C C D H D Image No. HHCS 1/2-13X1 1/2 GR5 HOSE GUARD MOUNT BRACKET WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT HHCS 5/16-18X1 GR5 HOSE COVER ASSEMBLY HOSE HOLDER BRACE HHCS 3/8-16X1 GR5 WASHER FLAT 3/8 SAE PLT WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT HOSE COVER MOUNT BRACKET HOSE COVER WELDMENT HOSE COVER MOUNT BRACKET 10/11/ P

24 Table of Contents Dry Fertilizer Delivery Part Number Index P /11/17

25 Table of Contents Part Number Index Frame Dry Fertilizer Delivery Ref. Part No. Part Description Comments Revision dwg R C C K C C C H C D C C C C C H C H D H C C D D C D S H Image No. SEED HOSE 2 1/2 ID 2 1/2 AIR HOSE BAND CLAMP CAP 2 1/2 OD TUBE 1 1/2 LONG YP16F FERTILIZER METER ASM PIN CLEVIS 1 1/4 X 6 7/8 USBL PIN ROLL 1/4X1 3/4 PIN COTTER 5/32 X 1 1/2 LONG STRUT WELDMENT HHCS 3/8-16X4 GR5 HOSE GUIDE WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT U-BOLT 1/2-13X3 1/32X7 1/4 HOSE MOUNT WELDMENT NUT HEX 1 1/2-6 PLT TURNBUCKLE SUB WELDMENT NTA WING PIVOT SLEAVE HOSE GUIDE 2-2 1/2" HOSES WASHER FLAT 1/2 SAE PLT U-BOLT 1/2-13 X 2 1/2 X 3 1/2 TUBE 2.5 X 14GA X TOWER BRACKET HHCS 3/8-16X3 3/4 GR5 TOWER MOUNT BRACKET 4-OUTLET DISTRIBUTOR ASY 4-WAY SPLITTER DIST TOWER Refer to Fertilizer Meter Assembly for breakdown Refer to Fertilizer Tower Assembly for breakdown 10/11/ P

26 Table of Contents Fertilizer Meter Assembly Part Number Index P /11/17

27 Table of Contents Part Number Index Frame Fertilizer Meter Assembly Ref. Part No. Part Description Comments Revision dwg C C D C V C C C H C H H D C C S C D C C H C C C C D C C C C D C C C D D C C C C H Image No. HHCS 1/4-20X3/4 SS HSG RIBB FLG 6BOLT PLT METERING BOX SEAL FLANGE SEAL 1.33IDX2.23ODX.31T BRG.755 HEX BORE W/S-S WASHER LOCK 1/4 SS WASHER LOCK SPRING 1/4 PLT NUT HEX SS 1/4-20 METERING BOX TOP PANEL WELDMNT CLAMP BAND 2 1/2 METERING BOX WELD SIDE ACCESS METER SHAFT WELDMENT GEAR 54 TOOTH QUICK CHANGE PIN LINCH 5/16 X 2 11/32 GEAR 17 TOOTH QUICK CHANGE 4 OF 6 YP1630F METER SHAFT METER BOX OUTLET TRANSITION METER BOX PARTITION LASER METER BOX INLET TRANSITION METERING BOX ACCESS SEAL CALIBRATION LID WELDMENT WASHER FLAT 1/4 SAE PLT DESTACO HOLD DOWN ACTION CLAMP HHCS 1/4-20X1 1/2 GR5 CAP 2 1/2 OD TUBE 1 1/2 LONG METER SHAFT MOUNT PLATE AIR DRILL METER SHAFT GASKET WASHER FLAT #8 BRASS METERING BOX END SPACER METERING BOX MIDDLE SPACER METER SHAFT AGITATOR 8 POINT HALF METERING BOX END SPACER SNAP RING EXT.812X APP RATE SENSOR ANCHOR BRKT APPLICATION RATE SENSOR ADAPTR HSHCS 1/4-28X1/2 GR8 BLK DECAL METER GEAR RANGE REVERSE DECAL CALIBRATION DOOR PICTURE DECAL CLEAN OUT DOOR PICTURE 45T QUICK CHANGE SPKT WELDMENT Includes parts 1,2,4,5 an /11/ P

28 Table of Contents Fertilizer Tower Assembly Part Number Index P /11/17

29 Table of Contents Part Number Index Frame Fertilizer Tower Assembly Ref. Part No. Part Description Comments Revision dwg C H C C D C C C C C D C C C S C D C R C D Image No. U-BOLT 1/2-13 X 2 1/2 X 3 1/2 4-WAY SPLITTER DIST TOWER WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT FACE PLATE 4 INCH WASHER FLAT 1/2 SAE PLT WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT 4IN V-BAND CLAMP 4-OUTLET DISTRIBUTOR BTM HALF SPLITTER TUBE 4-OUTLET DISTRIBUTOR TOP HALF WASHER FLAT 1/4 SAE SS HHCS 1/4-20X1 1/2 GR5 4-OUTLET DISTRIBUTOR ASY CLAMP WRM DRV #24 SS (1.06-2) TUBE 1.5OD X.083W X 2.5 LG VIGILENSE BLOCKAGE SENSOR 32MM FERTILIZER HOSE RETAINER SEED HOSE 1 1/2 BLACK W/ RIBS HHCS 3/8-16X3 3/4 GR5 TOWER BRACKET 10/11/ P

30 Lights Table of Contents Part Number Index P /11/17

31 Lights Table of Contents Part Number Index Frame Ref. Part No. Part Description Comments Revision dwg C C C C C C C D C C C C Image No. LIGHT HARNESS, 35' LEAD AG LIGHT HARNESS, EXT-15' LIGHT HARNESS, 10' WISHBONE DECAL REFLECTOR RED 1 1/2X9 NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1/2 SAE PLT LIGHT MOUNT TUBE HHCS 1/2-13X3 1/4 GR5 DUAL AG LIGHTS LH DECAL REFLECTOR AMBER 1 1/2X9 DECAL REFLECTR DAYTIME 1 1/2X9 10/11/ P

32 Transport Wheels Table of Contents Part Number Index P /11/17

33 Table of Contents Part Number Index Transport Transport Wheels Ref. Part No. Part Description Comments Revision dwg34492 Image No C NUT HEX 5/8-11 PLT C WASHER LOCK SPRING 5/8 PLT D SPEED SENSOR BRKT W/O BRKS C HHCS 5/8-11X2 GR C HHCS 1-8X5 1/2 GR C NUT HEX LOCK 1-8 PLT C ADC 2350 SPINDLE 10 BLT 12000# C HHCS 1/2-20X1 GR C WASHER LOCK SPRING 1/2 PLT D WHEELSENSOR TRIGGER PLATE GKN-P GREASE SEAL GKN ARMSTRONG C BRG CONE 2.50ID # C BRG CUP 4.43ODX.93WD # C HUB STUD 3/4-16X2 9/16 GR5 GKN-L HUB 10-BOLT MACHINED CASTING C BRG CUP 4.25ODX.87WD #453A C BRG CONE 1.75IDX1.15WD #460 GKN-P SPINDLE WASHER GKN ARMSTRONG C NUT HEX SLOTTED 1 1/4-12 PLAIN C PIN COTTER 7/32 X 2 GKN-P RUBBER GASKET GKN ARMSTRONG GKN-P HUB CAP GKN ARMSTRONG C HHCS 5/16-18X3/4 GR C HUB ASSY 10 BOLT 12000# K ADC BOLT HUB AND SPINDL C NUT HEX FLANGE 3/4-16 PLT C DECAL CAUTION TIRE 49 PSI/ C TITAN OR GOODYR 8* 14.9R46 R C WHEEL X 10-BOLT C VALVE STEM TR618AX.625X1.88LG S 8 STAR 14.9R46 WHEEL ASSY S 8 STAR 14.9R46 WHEEL ASSY Includes items and 26 Includes items 7 and 24 Shown Not Shown includes /11/ P

34 Gauge Wheels Table of Contents Part Number Index P /11/17

35 Gauge Wheels Table of Contents Part Number Index Transport Ref. Part No. Part Description Comments Revision dwg H C C C C D H D C D C C C C C C H C D C C C D C H D H C C C C C D C C D C C P C K C C C C C C C C C C C D Image No. 16R PARALLEL ARM WLDMNT 2 BUSHING 1 7/8X1 5/8X1 1/2 SPLT HHCS 1-8X18 GR5 NUT HEX 1-8 PLT WASHER LOCK SPRING 1 PLT WASHER - SAFETY CHAIN SA 16R CASTER MOUNT SWIVEL 2 CASTER SPACER BUSHING 2 1/2 X 2 1/4 X 2 LG. CASTER SWIVEL PIVOT PIN NUT LOCK 5/8-11 PLT HHCS 5/8-11X5 GR5 CYL REP 4.25X27.75X2.00 TIE NUT HEX JAM 1 1/2-6 PLT WASHER LOCK 1 1/2 PLT NUT HEX 1 1/2-6 PLT EYEBOLT WELDMENT CYL REP 4.50X10.37X1.5 ROD TIE 40P CASTER INNER PIVOT TUBE GREASE ZERK STRAIGHT 1/4-28 HHCS 1/2-13X1 1/4 GR5 WASHER LOCK SPRING 1/2 PLT NTA CASTER RETAINER CAP STEEL BUSHING 3 1/4X3IDX3LONG 16R CASTER LOWER SWIVEL WLD 2 BULK SEED CASTER VERT SHAFT 16R CASTER LOWER WLDMT SPINDLE SGL 2.73X BOLT HUB SEAL BRG CONE 2.00IDX1.18WD #3780 BRG CUP 3.67ODX.93WD #3720 HUB STUD 5/8-18X2 1/2 GR5 8-BOLT WHEEL HUB MACH. BRG CUP 3.00ODX.75WD #2720 BRG CONE 1.31IDX1.01WD #2790 7/8 SPINDLE WASHER, HARDENED NUT HEX SLOTTED 7/8-14 PLT PIN COTTER 3/16 X 1 1/4 PLT GREASE CAP HUB & SPINDLE ASY 8 BOLT 5790# LH TIRE/RIM 395/55B16.5 SKID 8 TIRE SKID ST 395/55B16.5 NHS RIM 16.5X12, 8 BLT 6 PILT 8 BC VALVE STEM METAL TR-575 TUBLES NUT LUG 5/8-18 X 90 DEG PLT BUSHING SPINDLE 1 1/2X1 1/4X1 HHCS 3/4-10X5 GR5 PIVOT THRUST WASHER NUT LOCK 3/4-10 PLT WASHER FLAT 1 SAE HHCS 5/8-11X3 GR5 TONGUE SPACER SKID BLOCK SLIDER BLOCK ADJUST SHIM Refer to "Hydraulic Cylinder ( C 4.25X27.75X2.00 TIE)" for breakdown Refer to "Hydraulic Cylinder ( C 4.5x10.37x1.5 Rod)" for breakdown Includes items: 28-39, & 45 Includes items: 42-44; Used on both wings (Tread runs reversed) 10/11/ P

36 Table of Contents Gauge Wheels (continued) Part Number Index Ref Part No C H H D H C H H C C C C C C C C Part Description NUT HEX FLANGE 5/8-11 PLT YP LH TONGUE SWAY BLOCK YP RH TONGUE SWAY BLOCK CASTER PIVOT PIN SHIM WASHER CYLINDER LCK CHNL 1 1/2X11 1/2 PIN 3/8 X 3 USABLE LW/PIN CYL PIN NR 1.25X3.09X2.63 W/GR CYL PIN NR 1.25X3.63USBX3.13CH PIN COTTER 3/16 X 2 HHCS 3/4-10X6 1/2 GR5 PIN CLEVIS 1 X 3 1/8 GR5 PLT BUSHING CYL 1 1/4 X 1 X 1 DECAL WARNING PINCH PT/CRUSH DECAL CAUTION TIRES NOT A STEP DECAL DANGER ELECTROCUTION HA DECAL CAUTION TIRE PSI 58/240 Comments (SHOWN) Formerly C Revision P /11/17

37 Table of Contents Part Number Index Transport Gauge Wheels (continued) This Page Intentionally Left Blank 10/11/ P

38 Air Brakes Table of Contents Part Number Index P /11/17

39 Air Brakes Table of Contents Part Number Index Brakes Ref. Part No. Part Description Comments Revision dwg C H C D C C C C C C C C C C C C C C C C C C C C C C C C C C C C D D C D C D D C C C C C C C C C C Image No. WHEEL CHOCK WHEEL CHOCK HORZ MOUNT RHSNB 3/8-16X1 GR5 WHEEL CHOCK MOUNTING BRKT WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT HHCS 3/4-10X2 GR5 PL 3/8MNPT BRASS HHCS 3/8-16X1 1/4 GR5 WASHER FLAT 3/8 SAE PLT TANK AIR 1488 CU IN 3/4 NPT SQ HD PIPE PLUG PETCOCK 1/4 BRASS AD 3/4MNPT 1/2FNPT BRASS NIPPLE 1/2-14 MNPT X 2 BRASS AD 22MM MALE 1/2FNPT AD 1/2MNPT X 3/8FNPT BRASS AD 3/8MNPT BRASS PL 1/2MNPT SQ HD BRASS EL 3/8MNPT X 3/8PL DOT BRASS FILTER AIR BRAKE LINE EL 1/2MNPT X 3/8PL DOT BRASS TUBE 3/8 NYLON AIR BRAKE DOT BOOSTER AIR/HYDRAULIC AD 16MM X 3/8FNPT HH1/8HR DOT FTH 3/16 MIFC 98" HH1/8HR DOT FTH 3/16 MIFC 42" TE 3/16 REV FLARE BRASS W/TAB BRAKE ASM SPNDL 10 BLT HUB RH BRAKE ASM SPNDL 10 BLT HUB LH SPEED SENSOR MOUNT BRKT WHEEL SENSOR TRIGGER HHCS 3/8-16X3 1/4 GR5 WHEEL SENSOR SPACER HHCS 3/8-16X1 GR5 WHEELSENSOR TRIGGER MOUNT HOSE HOLDER MOUNT AD BLKHD 1/2FNPT X 1/2FNPT HOSE AIR COIL 3/8 (BLUE) HOSE AIR COIL 3/8 (RED) CPLG AIR GLADHAND (BLUE) CPLG AIR GLADHAND (RED) HOLDER GLADHAND STORAGE HHCS 5/16-18X3/4 GR5 WASHER LOCK SPRING 5/16 PLT NUT HEX 1/4-20 PLT VALVE RELAY EMERGENCY Refer to Brake Assembly for breakdown Refer to Brake Assembly for breakdown 10/11/ P

40 Hydraulic Brakes Table of Contents Part Number Index P /11/17

41 Table of Contents Part Number Index Brakes Hydraulic Brakes Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C C C C C C C C C C C H C C C C C C C D D Image No. CP 3/4FORB MALE QD POPPET TYPE AD 9/16MJIC 3/4MORB HH1/4R /16FJIC BRAKE ASM SPNDL 10 BLT HUB LH BRAKE ASM SPNDL 10 BLT HUB RH UNION 3/16" IFc EL 90 9/16 MJIC 7/16 MORB NUT LOCK UN HYD CYL HYD CYL 1.5 SNGL 1.5 STR SPRG NUT HEX 5/8-11 PLT WASHER LOCK SPRING 5/8 PLT HHCS 3/8-16X1 1/2 GR5 WASHER FLAT 3/8 SAE PLT HOSE CLAMP 3/8 ID WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT HHCS 3/8-16X1 GR5 HH1/8HR DOT FTH 3/16 MIFC 98" HHCS 5/16-18X1 1/4 GR5 NUT HEX 1/2-13 PLT BRKT BRAKE HYD CYL MACHINED TE 3/16 REV FLARE BRASS W/TAB HHCS 3/8-16X1 1/4 GR5 EL 3/8MNPT X 3/8PL DOT BRASS CYL MASTER BRAKE 1.75 BORE HHCS 5/8-11X1 1/2 GR5 NUT HEX 5/16-18 PLT WASHER LOCK SPRING 5/16 PLT ROD PUSH MASTER CYL FLANGE BRAKE MASTER CYL HYD Refer to Brake Assembly for breakdown Refer to Brake Assembly for breakdown 10/11/ P

42 Brake Assembly Table of Contents Part Number Index P /11/17

43 Brake Assembly Table of Contents Part Number Index Brakes Ref. Part No. Part Description Comments Revision dwg D C C C C C C C C C C C C C C C C C C C C C C C Image No. 7/8 SPINDLE WASHER, HARDENED HUB STUD 5/8-18 X 3 1/4 GR5 NUT HEX SLOTTED 7/8-14 PLT NUT LUG 5/8-18 W/ FLG PIN COTTER 3/16 X 1 1/4 PLT SPINDLE 3.25 WLDMT W/ BRAKE HUB 8BOL SHOE BRAKE X 3.5 KIT COVER DUST BRAKE ALKO CYLINDER BRAKE WHEEL BRAKE BACKING PLATE 12.25" ARM WHEEL PARK BRAKE DRUM BRAKE X 3.5 BRAKE SELF ADJUSTOR 12.25" SPRING F/ BRAKE BRG CONE 2.00IDX1.18WD #3780 BRG CUP 3.67ODX.93WD #3720 BRG CONE 1.31IDX1.01WD #2790 BRG CUP 3.00ODX.75WD #2720 HUB CAP 8-BOLT HUB SEAL NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT AL-KO LOCK WASHER 3/8 AL-KO BOLT 3/8" - 16 X 3/4 AL-KO SHOE HOLD DOWN COTTER PN AL-KO SHOE HOLD DOWN NUT AL-KO SHOE HOLD DOWN SPRING AL-KO SHOE HOLD DOWN WASHER AL-KO SHOE HOLD DOWN BOLT PIN COTTER 5/32 X 1 PLT 10/11/ P

44 Table of Contents Part Number Index Wing Drive and Sprocket Tree Mounting P /11/17

45 Table of Contents Part Number Index Drive Wing Drive and Sprocket Tree Mounting Ref. Part No. Part Description Comments Revision dwg C C C C C C C C D C C C C C C C K Image No. PIN LINCH 3/16 X 1 9/16 LONG SPKT 40C17 X 7/8 HEX BORE SPKT 40C23 X 7/8 HEX BORE SPKT 40C24 X 7/8 HEX BORE SPKT 40C25 X 7/8 HEX BORE SPKT 40C26 X 7/8 HEX BORE SPKT 40C27 X 7/8 HEX BORE SPKT 40C20 X 7/8 HEX BORE GROUND DR WHL SPKT STORAGE MNT NUT HEX 3/8-16 PLT WASHER LOCK SPRING 3/8 PLT U-BOLT 3/8-16 X 7 1/32 X 7 7/8 U-BOLT 5/8-11 X 7 1/32 X 8 1/2 U-BOLT 5/8-11 X 4 1/32 X 5 1/2 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT GROUND DRIVE WHEEL ASSEMBLY Refer to "Wing Ground Drive ( k)" for breakdown 10/11/ P

46 Table of Contents Wing Ground Drive ( K) Part Number Index P /11/17

47 Table of Contents Part Number Index Drive Wing Ground Drive ( K) Ref. Part No. Part Description Comments Revision dwg C C D C C C D H C D C C H C C C C D C D C C C C H D D H C C C S C C C C D C C D H C C C C D C D C C C H C C C C C Image No. HHCS 5/16-18X1 3/4 GR5 WASHER LOCK SPRING 5/16 PLT LOWER DRIVE SPROCKET NUT HEX JAM 1 1/4-12 PLT BRG, DUO-FACE W/SEAL LM67000LA BRG CUP LM SPROCKET SPACER RING FERT DRIVE WHEEL WELDMENT GREASE ZERK 1/4-28 X 45-DEG FERT DRIVE WHEEL SPINDLE RHSNB 5/8-11X5 GR5 NUT HEX FLANGE LOCK 5/8-11 PLT FERT DRIVE CHAIN SHIELD WELDMT HHCS 5/16-18X3/4 GR5 DECAL WARNING MOVING CHAIN WASHER FLAT 5/16 USS PLT RHSNB 1/2-13X2 1/4 GR5 IDLER PIVOT TB 1ODX.56IDX1.13L IDLER 1 PC 2.38X1.01X1.062 WASHER SPECIAL.074 X.53 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT WASHER FLAT 1/2 USS HARD PLT GREASE ZERK STRAIGHT 1/4-28 FERT DRIVE WHL SPLIT ARM WLDMT CHAIN MUD SHIELD BEARING SPACER RING FERT DRIVE WHL PUMP DRIVE SPKT NUT HEX FLG TP LK 5/16-18ZNYCR PIN COTTER 5/32 X 1 1/4 LG PIN CLEVIS 1/2 X 1 3/4 GND DRIVE SPRING ASY PLUG, SPRING ROD CASTING HHCS 1/2-13X10 SPTHD GR8 DRV WHL SPRING TRUNION CASTING SPRING COMP 2 1/2ODX3/8X12 7/8 SPRING STOP STAMPING SMALL NUT HEX FLANGE 1/2-13 GR G PLT NUT HEX JAM 1/2-13 PLT ADJ. YOKE END GROUND DRIVE ARM DN STOP WLMT FLANGETTE 52 3-BOLT PLT BRG INS 7/8HEXX2.04OD SPH RHSNB 5/16-18X1 GR5 SPKT 40C19 X 7/8 HEX BORE CHAIN RL #40 49 PITCHES SPKT 40C30 X 7/8 HEX BORE GND DRIVE WHL JACKSHAFT PIN ROLL 1/4 X 1 1/2 LG PLT PIN LINCH 3/16 X 1 9/16 LONG KNOB 3/8-16 MALE THD 2 3/8OD LH GND DRIVE WL CHAIN GRD WLMT HHCS 5/8-11X6 GR5 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT PIN COTTER 3/16 X 1 1/2 PLT NUT HEX SLOTTED 3/4-16 Include items: /11/ P

48 Table of Contents Part Number Index Wing Ground Drive ( K) (continued) Ref Part No C C D C H C H D D C S D D C D D C C C H C C C D C C D C D C C C Part Description BRG BALL 1.18ODX2.44OD WASHER FLAT 3/4 HARD ASTMF436 FERT DRIVE WHL BEARING SPACER SNAP RING INT 2.44 OD FERT DRIVE SHAFT WELDMENT HHCS 1/2-13X3 1/4 GR5 RH GND DRIVE WL CHAIN GRD WLMT IDLER PIVOT TB 1ODX.56IDX1.84L TUBE RND 1 OD X 7/32W X 3.31 HHCS 1/2-13X4 1/2 GR5 LOCK COLLAR, 7/8 HEX W/ SET SC CHAIN RL #40 52 PITCHES GND DRIVE WHL JACKSHAFT NUT HEX 5/8-11 PLT CHAIN RL #40 76 PITCHES FERT DRIVE SHAFT HEAD BUSHING U-BOLT 5/8-11 X 4 1/32 X 5 1/2 U-BOLT 5/8-11 X 7 1/32 X 8 1/2 WASHER LOCK SPRING 5/8 PLT GROUND DRIVE WHEEL MOUNT PIN COTTER 1/8 X 1 1/2 YP1630 GND DR RH CHAIN ROUTING YP1630 GND DR LH CHAIN ROUTING CHAIN RL #40 X 104 PITCHES SPKT 40C19 X 7/8 HEX BORE SPKT 40C28 X 7/8 HEX BORE GROUND DRIVE WHEEL LOCKUP ARM PIN WIRE RETAINING 1/4 X 1 3/4 CHAIN RL # PITCHES YP1630 GND DR RH CHAIN ROUTING YP1630 GND DR LH CHAIN ROUTING SPKT 40C20 X 7/8 HEX BORE Comments Revision P /11/17

49 Table of Contents Part Number Index Drive Wing Ground Drive ( K) (continued) This Page Intentionally Left Blank 10/11/ P

50 Table of Contents Fertilizer Meter Drive Part Number Index P /11/17

51 Table of Contents Part Number Index Drive Fertilizer Meter Drive Ref. Part No. Part Description Comments Revision dwg C C C K D C S D D C C C C C D C C C C C C D C C C C H C D D C D H C C D C C H C C C C H H C C H C C D H C C H C Image No. U-BOLT 5/8-11 X 7 1/32 X 8 1/2 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT FERTILIZER DRIVE GROUND WHEEL FERT DRIVE JACKSHAFT PIN ROLL 1/4 X 1 1/2 LG PLT RATCHET CLUTCH ASSEMBLY CHAIN RL # PITCHES 7/8 HEX SHAFT SPACER TB X 9/32 RHSNB 5/16-18X3/4 GR5 FLANGETTE 52 3-BOLT PLT BRG INS 7/8HEXX2.04OD SPH NUT HEX 3/4-10 PLT WASHER LOCK SPRING 3/4 PLT DRY FERT JACKSHAFT MNT HHCS 3/4-16X1 3/4 GR5 NUT HEX FLG TP LK 5/16-18ZNYCR NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1/2 USS HARD PLT IDLER 1 PC 2.38X1.01X1.062 TUBE RND 1 OD X 7/32WL X 2.25 HHCS 1/2-13X3 1/2 GR5 HHCS 1/2-13X3 1/4 GR8 WASHER FLAT 3/4 USS PLT SNAP RING EXT 1 HEAVY CALIBRATION SHFT MNT BRKT WLMT DECAL WARNING MOVING CHAIN CHAIN RL #40 78 PITCHES SPKT 40C15 7/8 HEX W/ SS HOLES DECAL ROTATION ARROW CCW CALIBRATION JACK SHAFT CALIBRATION CRANK WELDMENT GRIP HANDLE VNYL 1.0 IDX4.5 LG PIN WIRE RETAINING 1/4 X 1 3/4 CONTROL ARM ADJUSTMENT SCREW PIN ROLL 5/32 X 5/8 PLT GAUGE WHEEL SFT PIVOT BUSHING CONTROL ARM WELDMENT GEARBOX CONTROL ARM DECAL PIN HAIR COTTER.148 WIRE PIN COTTER 1/4 X 2 PLT PIN ROLL 1/4 X 2 LG PL SHAFT CONTROL WELDMENT CONTROL CRANK HANDLE WLDMT NUT HEX 3/8-24 PLT WASHER LOCK SPRING 3/8 PLT CONTROL ARM ANCHOR WELDMENT ZERO-MAX VARIABLE RATE GEARBOX SPKT 40B20 W/ 1 B KW & SS KEY 1/4 X 1/4 X 1 1/4 LG GEARBOX SPROCKET T SPKT 40B15 X 1 B W/KW & SS HHCS 7/16-14X4 1/2 GR5 GEARBOX MOUNT WLMT HHCS 1/2-13X1 1/2 GR5 Refer to Ground Drive ( K) for breakdown Includes items: /11/ P

52 Table of Contents Fertilizer Meter Drive (continued) Part Number Index Ref Part No C C D C D D C H C C D C C D C D D C D Part Description NUT HEX WHIZ 5/16-18 PLT HHCS 5/16-18X4 GR5 CHAIN RL # PITCHES SPRING EXT. 1.0ODX5.OLX.095MW SPACER PSS IDLER INNER PIVOT TUBE PRESS WHEEL ARM PIVOT BUSHING IDLER BRACKET WELDMENT WASHER FLAT 7/16 SAE PLT NUT HEX FLANGE LOC 7/16-14 PLT DRY FERT GEAR BOX MNT SHIELD KNOB 3/8-16 MALE THD 2 3/8OD HSHCS 1/4-20X7/8 CLUTCH, SIDE PLATE C/BORED SPKT 40A28 SPECIAL BORE KEY, RATCHET CLUTCH POLYURETHANE RATCHET SPRING HUB, RATCHET CLUTCH CLUTCH, SIDE PLATE TAPPED Comments Revision P /11/17

53 Table of Contents Part Number Index Drive Fertilizer Meter Drive (continued) This Page Intentionally Left Blank 10/11/ P

54 Table of Contents Fertilizer Ground Drive ( K) Part Number Index P /11/17

55 Table of Contents Part Number Index Drive Fertilizer Ground Drive ( K) Ref. Part No. Part Description Comments Revision dwg C C D C C C D H C D C H D C H D C C C D C D C C C D C C S C H S C C C C C C D C C H C C D D C C H C C C C D H C Image No. HHCS 5/16-18X1 3/4 GR5 WASHER LOCK SPRING 5/16 PLT LOWER DRIVE SPROCKET NUT HEX JAM 1 1/4-12 PLT BRG, DUO-FACE W/SEAL LM67000LA BRG CUP LM SPROCKET SPACER RING FERT DRIVE WHEEL WELDMENT GREASE ZERK 1/4-28 X 45-DEG FERT DRIVE WHEEL SPINDLE RHSNB 5/8-11X5 GR5 FERT CONT WHL SPLIT ARM WLMT CHAIN MUD SHIELD NUT HEX FLANGE LOCK 5/8-11 PLT FERT DRIVE WHL UPR CHAIN SHLD CHAIN RL # PITCHES HHCS 5/16-18X3/4 GR5 WASHER FLAT 5/16 USS PLT RHSNB 1/2-13X2 1/4 GR5 IDLER PIVOT TB 1ODX.56IDX1.13L IDLER 1 PC 2.38X1.01X1.062 WASHER SPECIAL.074 X.53 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT WASHER FLAT 1/2 USS HARD PLT BEARING SPACER RING GREASE ZERK STRAIGHT 1/4-28 PIN CLEVIS 1/2 X 1 3/4 GND DRIVE SPRING ASY PIN COTTER 5/32 X 1 1/4 LG FERT DRIVE WHL PUMP DRIVE SPKT LOCK COLLAR, 7/8 HEX W/ SET SC SPKT 40C25 X 7/8 HEX BORE WASHER MACH 1.50 X 1.00 X 18GA FLANGETTE 52 3-BOLT PLT BRG INS 7/8HEXX2.04OD SPH RHSNB 5/16-18X1 GR5 HHCS 5/8-11X6 GR5 FERT DRIVE WHL BEARING SPACER BRG BALL 1.18ODX2.44OD SNAP RING INT 2.44 OD FERT DRIVE SHAFT WELDMENT PIN ROLL 1/4 X 1 1/2 LG PLT SPKT 40C32 X 7/8 HEX BORE CHAIN RL #40 86 PITCHES FERT DRIVE CHAIN GUARD KNOB 3/8-16 MALE THD 2 3/8OD DECAL WARNING MOVING CHAIN GND DRIVE FERT LIFT ARM WLMT PIN COTTER 5/32 X 1 PLT WASHER FLAT 1.31ODX.65IDX.188T CYL 1.5X2.5X.75 ROD W/CLEVIS PIN CLEVIS 5/8 X 2 1/2 PLT FERT DRIVE CYL HOSE GUARD FERTILIZER DRIVE MNT WLMT U-BOLT 5/8-11 X 7 1/32 X 8 1/2 Refer to Hydraulic Cylinder ( C) for breakdown 10/11/ P

56 Table of Contents Part Number Index Fertilizer Ground Drive ( K) (continued) Ref Part No C C C C D C C C C C D D C C D C C C C C Part Description WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT NUT HEX FLG TP LK 5/16-18ZNYCR PIN WIRE RETAINING 1/4 X 1 3/4 FERT DRIVE TRANSPORT LOCKUP PIN CLEVIS 1/2 X 6 PIN COTTER 3/16 X 1 1/2 PLT NUT HEX SLOTTED 3/4-16 WASHER FLAT 3/4 HARD ASTMF436 NUT HEX FLANGE LOCK 5/8-18 PLT IDLER PIVOT TB 1ODX.56IDX1.84L ADJ. YOKE END NUT HEX JAM 1/2-13 PLT NUT HEX FLANGE 1/2-13 GR G PLT SPRING STOP STAMPING SMALL SPRING COMP 2 1/2ODX3/8X12 7/8 DRV WHL SPRING TRUNION CASTING HHCS 1/2-13X10 SPTHD GR8 PLUG, SPRING ROD CASTING RHSNB 1/2-13X3 GR5 PLT Comments Revision P /11/17

57 Table of Contents Part Number Index Drive Fertilizer Ground Drive ( K) (continued) This Page Intentionally Left Blank 10/11/ P

58 Table of Contents Parallel Arm & Hopper Support Part Number Index P /11/17

59 Table of Contents Part Number Index Opener Parallel Arm & Hopper Support Ref. Part No. Part Description Comments Revision dwg H H H H H C C C C D C C H H C D C D Image No. HOPPER SUPPORT WELD INTERPLANT HOPPER SUPPORT WELD DROP MNT WLMT LH OFFSET DROP MNT WLMT DROP MNT WLMT RH OFFSET U-BOLT 3/8-16 X 7 1/32 X 7 7/8 WASHER LOCK SPRING 3/8 PLT WASHER LOCK 7/16 PLT HHCS 5/8-11X2 GR5 PARALLEL ARM PIVOT TUBE WASHER FLAT 5/8 HARD ASTMF436 NUT HEX FLANGE LOCK 5/8-11 PLT PARALLEL ARM WELD TOP PARALLEL ARM WELD NUT FLANGE LOCK 3/8-16 PLT UP-DOWN STOP RHSNB 3/8-16X1 1/4 GR5 SEED HOPPER HOOK CUP Used with dual hopper only Used with single hopper only 10/11/ P

60 Spring Assembly Table of Contents Part Number Index P /11/17

61 Table of Contents Part Number Index Opener Spring Assembly Ref. Part No. Part Description Comments Revision dwg C C C D C S SI C C D H C C Image No. PIN COTTER 1/4 X 2 PLT WASHER FLAT 1 SAE EYE-BOLT 1/2-13 PLT SPRING PLUG.250 DIA. SPRING EXT 2.19ODX.250X6.0 DOWN PRESSURE SPRING ASSY.250 DOWN PRESSURE SPRING ASSY.262 PIN CLEVIS 3/8 X 3 3/4 PLT SPRING.540 O.D.X 1 1/4 X.054W SHAFT, SPRING MOUNT GUIDE WELD T-HANDLE ASSEMBLY PIN ROLL 5/32 X 5/8 PLT Includes items: 3-5 Heavy Duty Kit 10/11/ P

62 Shank Assembly Table of Contents Part Number Index P /11/17

63 Table of Contents Part Number Index Opener Shank Assembly Ref. Part No. Part Description Comments Revision dwg C D C C S C D C C H S C C D C Image No. SNAP RING EXT 5/8.050 T 20 SER OPNR CAM PIN PIN CLEVIS 1/4 X 2 1/2 PLT PIN COTTER 3/32 X 1 LONG SEED TUBE FPU TB,CLIP & SENSOR PIN ROLL 5/16 X 7/8 DISK SHIELD NUT HEX WHIZ 5/16-18 PLT RHSNB 5/16-18X3/4 GR5 SHANK WELD ADJUSTMENT ASSY SEED TUBE 25S FPU TB&CAP W/ HL DJ PLANTER STYLE SEED SENSOR SEED TUBE 25S HOOK CLIP CABLE TIE.19X15 PANDU BT4S-CO 10/11/ P

64 Table of Contents Adjustment Assembly Part Number Index P /11/17

65 Table of Contents Part Number Index Opener Adjustment Assembly Ref. Part No. Part Description Comments Revision dwg C C D D C C C C C Image No. HANDLE CASTING TOP STOP WALKBEAM CASTING WALKBEAM MOUNT WALKBEAM PIVOT PIN WASHER 3/4 X 17/32 X 18 GA PLT PIN COTTER 3/32 X 1 LONG PIN ROLL 5/32 X 1 1/2 PLT PIN ROLL 1/4 X 1 1/2 LG PLT SPRING COMP.72 X 1.5 X.072WD 10/11/ P

66 Disk & Scraper Table of Contents Part Number Index P /11/17

67 Disk & Scraper Table of Contents Part Number Index Opener Ref. Part No. Part Description Comments Revision dwg C D S H C C D C C D Image No. HHCS 5/8-11X1 1/2 GR5 NYL DD BRG FLANGE DUST COVER 4.0 MM 15 DISC W/ 5/8 ASSY 25P SCRAPER SEP WLDMT 3/8 FRT PIN ROLL 5/16 X 5/8 PLT WASHER MACH 1.19 X.63 X 18GA SCRAPER, DISC LH NUT HEX WHIZ 5/16-18 PLT RHSNB 5/16-18X3/4 GR5 SCRAPER, DISC RH Refer to "Side Gauge Wheel & Disk Assembly" for breakdown 10/11/ P

68 Side Gauge Wheel Table of Contents Part Number Index P /11/17

69 Table of Contents Part Number Index Opener Side Gauge Wheel Ref. Part No. Part Description Comments Revision dwg C C C C D C C C C C C C D D S D C Image No. HHCS 5/8-11 X 3 GR8 WASHER LOCK SPRING 5/8 PLT 4 X 16 GAUGE TIRE ASSY-PLASTIC WASHER MACH 1.19 X.63 X 18GA ARM, GAUGE WHEEL HHCS 1/2-13X3 GR5 HFS 1/2-13 X 1 1/2 GR8 NYL PLT 25P ECCENTRIC ADJUSTER WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT GREASE ZERK STRAIGHT 1/4-28 U CUP SEAL 25P O-RING BUSHING ECCENTRIC BUSHING 25P WIDE ELIMINATOR BUSHNG ASY SPINDLE, GA WHL MNT ADJ SCRW SET SQ HD 1/2-13X1 3/4GR5 Refer to "Side Gauge Wheel & Disk Assembly" for breakdown Includes items: /11/ P