Parts Manual UD2600, UD3000 & UD3300. Ultra Disk. Copyright 2018 Printed 10/01/ P

Transcription

1 Table of Contents Part Number Index Parts Manual Ultra Disk UD2600, UD3000 & UD3300 Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! Cover illustration may show optional equipment not supplied with standard unit. Copyright 2018 Printed 10/01/ P

2 Table of Contents Table of Contents Part Number Index Section 1: Introduction...4 Using This Manual...4 Manual Replacement Information...4 Manual Revisions...4 Touch-up Paint...4 Hardware Legend...5 Replacement Hardware...5 Serial Numbers...5 Part Number Service Coding...5 Section 2: Frames...6 Hitch Assembly...6 Center Frame Assembly...10 Level Bar Assembly...12 Center Lift Assembly...14 Truss & Level Bar Assembly...16 Wing Assembly...18 Lights & Fold Sensor...20 Section 3: Transport...22 Center Transport Assembly UD2600 & UD Center Transport Assembly UD Wing Transport Assembly...26 Gauge Wheel Assembly...28 Section 4: Hydraulics...30 Hydraulic Level System...30 Hydraulic Lift System...32 Fold Hydraulics UD Fold Hydraulics UD3000 & UD Hydraulic Cylinder ( C 4X10X38 ROD)...38 Hydraulic Cylinder ( C 3.75X10X38 ROD)...40 Hydraulic Cylinder ( C 4.25X10X50 ROD)...42 Hydraulic Cylinder ( C 4X30X2 ROD)...44 Section 5: Gangs...46 Center Gang Assembly...46 Wing Gang Assembly - Left...48 Wing Gang Assembly - Right...50 Shank & Blade Assembly...52 Furrow Filler Assembly...54 Section 6: Options...56 Weight Package (Option)...56 Section 7: Attachments Row Coiltine & Crumbler Attachment Assembly Row Coiltine & Crumbler Hydraulic System UD Row Coiltine & Crumbler Hydraulic System UD Row Coiltine & Crumbler Hydraulic System UD Packing Roller Assembly...68 Packing Roller Hydraulic System UD Packing Roller Hydraulic System UD Packing Roller Hydraulic System UD Seedbed Crumbler Attachment Assembly...76 Seedbed Crumbler Attachment Hydraulic System...78 Part Number Index...80 Copyright 2018 All rights reserved Printed 10/01/18 Great Plains Manufacturing, Inc. provides this publication as is without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. Great Plains Manufacturing, Incorporated Trademarks The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains All other brands and product names are trademarks or registered trademarks of their respective holders. Printed in the United States of America P /01/18

3 Table of Contents Part Number Index Alphabetized Table of Contents Selected Models 2 2 Row Coiltine & Crumbler Attachment Assembly Row Coiltine & Crumbler Hydraulic System UD Row Coiltine & Crumbler Hydraulic System UD Row Coiltine & Crumbler Hydraulic System UD Wing Gang Assembly - Left...48 Wing Gang Assembly - Right...50 Wing Transport Assembly...26 C Center Frame Assembly...10 Center Gang Assembly...46 Center Lift Assembly...14 Center Transport Assembly UD2600 & UD Center Transport Assembly UD F Fold Hydraulics UD Fold Hydraulics UD3000 & UD Furrow Filler Assembly...54 G Gauge Wheel Assembly...28 H Hitch Assembly...6 Hydraulic Cylinder ( C 4X10X38 ROD)...38 Hydraulic Cylinder ( C 3.75X10X38 ROD)...40 Hydraulic Cylinder ( C 4.25X10X50 ROD)...42 Hydraulic Cylinder ( C 4X30X2 ROD)...44 Hydraulic Level System...30 Hydraulic Lift System...32 L Level Bar Assembly...12 Lights & Fold Sensor...20 P Packing Roller Assembly...68 Packing Roller Hydraulic System UD Packing Roller Hydraulic System UD Packing Roller Hydraulic System UD S Seedbed Crumbler Attachment Assembly...76 Seedbed Crumbler Attachment Hydraulic System...78 Shank & Blade Assembly...52 T Truss & Level Bar Assembly...16 W Weight Package (Option)...56 Wing Assembly /01/ P

4 Table of Contents P Part Number Index -4-10/01/18

5 Table of Contents Part Number Index 10/01/ P

6 Hitch Assembly Table of Contents Part Number Index P /01/18

7 Hitch Assembly Table of Contents Part Number Index Section 2: Frames Ref. Part No. Part Description Comments Revision dwgtp C C C C H C C C C C C D C C H C C C C C C C C C D C H C S H C C C C C C C C C D C C C C C C C C C C C H H C H Image No. DECAL-DOWN PRESSURE VALVE DECAL FOLD VALVE HHCS 1 1/4-7X8 GR8 SPTHD NUT HEX TOP LOCK 1 1/4-7 PLT LINK - SD LEVELING - U/D SLEEVE BEARING 25 ID X 5 L DECAL GP PLANTING COMPONENTS MANUAL PAK 1" W/ GASKET HHCS 1/4-20X1 GR5 MINI END WHEEL PRESS WHEEL WASHER FLAT 1 1/4 SAE PLT TRNBCKLE WRENCH 2 5/ /16 PIN LYNCH 3/16 W/COTTER/CHAIN DECAL WARNING HYD PRESS LONG HITCH FRAME WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT PIN CLVS 0X2.45 USBL WASHER MACH 5X00X.075 PIN COTTER 3/16 X 2 DECAL CAUTION GENERAL 4X5 DECAL DANGER ELECTROCUTION HA HHCS 1-8X6 GR8 PLT SPTHD NUT HEX TOP LOCK 1-8 PLT HHCS 1 1/4-7X8 1/2 GR8 SPTH HHCS 1-8X8 GR8 PLT SPTHD H - BRACKET NUT HEX TOP LOCK 1-8 PLT LEVEL TURNBUCKLE H-BRACKET - SD - U/D DECAL FLAG CAT 5 PERFECT HITCH DECAL GP&LOGO HARVEST/3X20 STR DECAL COUPLER STORAGE, GREEN DECAL COUPLER STORAGE, RED DECAL COUPLER STORAGE, BLACK DECAL WARNING 20 MPH TRANS LRG SQUARE SCREW JACK 7000LBS. WASHER FLAT 1 SAE SAFETY CHAIN SUPPORT WASHER LOCK SPRING 1 PLT NUT HEX 1-8 PLT DECAL DANGER CRUSHING HAZARD DECAL WARNING TONGUE RISING SPRING HOSE LOOP HEAVY HHCS 1/2-13X1 GR5 WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1/2 USS PLT HITCH BACKSTOP - CAT III HITCH BASE - CAT IV HITCH CLEVIS TURNBUCKLE SUB ASSY LH THREAD TURNBUCKLE SUB ASSY NUT HEX JAM 1 1/2-12 PLT TURNBUCKLE SUB ASSY RH THREAD Attach to mounting plate on hitch Includes items Contains C Bushings Do not use if tractor draw bar has hammer strap. Will not work with Cat 5. 10/01/ P

8 Table of Contents Hitch Assembly (continued) Part Number Index Ref Part No D C C C C C C C C C Part Description 30,000LB AG SAFETY CHAIN HHCS 7/8-9X3 GR5 WASHER FLAT 7/8 USS PLT WASHER LOCK SPRING 7/8 PLT NUT HEX 7/8-9 PLT DECAL - ULTRA-DISK NUT HEX TOP LOCK 3/4-10 PLT PIN CLVS HDLS 25S8.25 USBL HHCS 3/8-16X2 1/4 GR8 PLT NUT HEX TOP LOCK 3/8-16 PLT Comments Revision P /01/18

9 Table of Contents Part Number Index Section 2: Frames Hitch Assembly (continued) This Page Intentionally Left Blank 10/01/ P

10 Table of Contents Center Frame Assembly Part Number Index P /01/18

11 Table of Contents Part Number Index Section 2: Frames Center Frame Assembly Ref. Part No. Part Description Comments Revision dwgtp H H H H H H H H H H H H H H H H S S C C C C C C C C C C C C C C C C C C C C H H C C C C C C C C C C D Image No. CENTER FRAME - SD 26/30 CENTER FRAME - US3300 CENTER BRACE BAR SD26/3050 CENTER BRACE BAR - UD3300 GANG BAR - RC - SD26/3050 GANG BAR - RC - UD3300 TORQUE TUBE-SD TORQUE TUBE - UD3300 TRUSS - SD TRUSS - SD CENTER FOLD BRACKET UD2600 SD FOLD CYL MNT UD FOLD CYL MNT SD3050 WING STOP SD FOLD LOCK CENTER BREAKER HANGER WALKING BEAM ASSEMBLY WALKING BEAM ASSEMBLY SD WIDE CYL 4X30X2 TIE CL 3000# CYL 5X30X2 ROD (TIE) CYL REP 4.25X10X50 ROD (TIE) CYL REP 4.5X10X2 ROD (TIE) BUSHING CYL 1 1/4 X 1 X 1 PIN CLVS 25X3.63 USBL PIN CLVS 0X3.13 USBL PIN COTTER 3/16 X 2 WASHER MACH 1 7/8X1 1/4X 14GA WASHER MACH 5X00X.075 HHCS 3/4-10X3 GR5 WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT HHCS 1-8X2 1/2 GR5 NUT HEX 1-8 PLT WASHER LOCK SPRING 1 PLT PIN HDLS PVT 25X7.75 HRDN HHCS 1/2-13X2 5/8 GR8 SPTHD NUT HEX TOP LOCK 1/2-13 PLT HHCS 3/4-10X2 GR8 REAR BAR REAR BAR U-BOLT 3/4-10X4 1/32X4 1/2 HHCS 1/2-13X4 1/2 GR5 HHCS 3/4-10X4 1/2 GR5 PIN 0X6.42 USBL HRD PLT HHCS 3/8-16X2 1/4 GR5 NUT HEX TOP LOCK 3/8-16 PLT DECAL WARNING WINGS COULD FALL DECAL-DOWN PRESSURE VALVE DECAL FOLD VALVE DECAL - SPEEDBLADE FOLD BRACKET BRACE Models UD2600 & 3000 (Shown) Models UD3300 Models UD2600 & 3000 (Shown) Models UD3300 Models UD2600 & 3000 (Shown) Models UD3300 Models 2600 Only one of these will be used Models 3000 Models 3300 All Models Models UD2600 & 3000 (Shown) Models UD3300 Models UD3000 & 3300 Models 2600 Models 2600 Models UD3000 & 3300 Models 2600 Used on Base end Models UD3000 & 3300 Models 2600 Models UD3000 & 3300 Used on all gang bars to connect to frame. Models UD2600 & 3000 (Shown) Models UD3300 Models UD3300 Refer to Center Walking Beam for breakdown 10/01/ P

12 Table of Contents Level Bar Assembly Part Number Index P /01/18

13 Table of Contents Part Number Index Section 2: Frames Level Bar Assembly Ref. Part No. Part Description Comments Revision dwgtp A C C H C H C C C H D C H C H H C H C C C C C C C D S Image No. HYDRAULIC DISK LEVEL NUT HEX JAM 1 1/2-12 PLT NUT HEX 1 1/2-6 PLT SPRING GUIDE SPRING COMP 4.5ODX125WX13L LEVEL BAR - SD NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT HHCS 1/2-13X1 3/4 GR5 LEVEL BAR - SD PIN-5/8X2 7/8 HHCS 1/2-13X2 GR5 NYL H-BRACKET - SD - U/D HHCS 1/2-13X2 GR5 TORQUE TUBE-SD TORQUE TUBE - UD3300 SLEEVE BEARING 25 ID X 5 L LINK - SD LEVELING - U/D PIN CLVS HDLS 25X8.25 USBL HHCS 3/8-16X2 1/4 GR8 PLT NUT HEX TOP LOCK 3/8-16 PLT PIN CLVS 0X2.75 USBL WASHER MACH 5X00X.075 PIN COTTER 3/16 X 2 NUT HEX TOP LOCK 1 1/4-7 PLT HHCS 1 1/4-7X8 1/2 GR8 SPTH SD LEVELING LINK - U/D Refer to Hydraulic Disk Level for breakdown. Contains C Bushings Models 2600 & 3000 Models 3300 Includes items 16 & 17 10/01/ P

14 Table of Contents Center Lift Assembly Part Number Index P /01/18

15 Table of Contents Part Number Index Section 2: Frames Center Lift Assembly Ref. Part No. Part Description Comments Revision dwgtp H H C C C C C C C C H C C C C C C C C D H H S C C C C C C C C H H C C C C C Image No. CENTER FRAME - SD 26/30 CENTER FRAME - US3300 DECAL NOTICE TRANSPORT LOCKS DECAL REFLECTOR AMBER 2X9 DECAL - UD2600 DECAL - UD3000 DECAL - UD3300 DECAL GP&LOGO HARVEST/3X20 STR HHCS 5/8-11X2 1/2 GR5 NUT LOCK 5/8-11 PLT DEPTH STOP TUBE-SD HHCS 5/16-18X2 GR5 WASHER LOCK SPRING 5/16 PLT HYD VALVE DEPTH CONTROL CROSS NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT NUT WELD 1/2-13 4XPROJECTION WASHER FLAT 1/2 HARD ASTMF436 SPRING COMP.75OD.12W 2.63LG DEPTH STOP ROD 1/2" THREADE DEPTH STOP BRACKET DEPTH STOP END DEPTH STOP ASSEMBLY HHCS 1/2-13X2 1/2 GR5 NUT HEX TOP LOCK 1/2-13 PLT HHCS 1/2-13X2 5/8 GR8 SPTHD PIN 0X6.42 USBL HRD PLT DECAL DISK DEPTH CONTROL PIN HDLS PVT 25X7.75 HRDN DECAL CAUTION TIRES NOT A STEP DECAL WARNING PINCH PT/CRUSH TORQUE TUBE-SD TORQUE TUBE - UD3300 CYL REP 4.5X10X2 ROD TIE 3000# CYL REP 4.25X10X50 ROD (TIE) DECAL DANGER CHARGE FOLD CYL HHCS 3/8-16X2 1/4 GR5 NUT HEX TOP LOCK 3/8-16 PLT Models UD2600 & 3000 Models UD3300 Includes items Models UD2600 & 3000 Models UD3300 Refer to Hydraulic Cylinder ( C) for breakdown. Used on UD2600 Refer to Hydraulic Cylinder ( C) for breakdown. Used on UD3300 & /01/ P

16 Table of Contents Truss & Level Bar Assembly Part Number Index P /01/18

17 Table of Contents Part Number Index Section 2: Frames Truss & Level Bar Assembly Ref. Part No. Part Description Comments Revision dwgtp H C C C C H C C C H C C H H C C C C C C Image No. HITCH TRUSS HHCS 3/4-10X2 GR5 HHCS 3/4-10X2 1/2 GR5 WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT LEVEL BAR 1200TM/1500TM PIN 0X8.67 USBL HRD PLT HHCS 3/8-16X2 1/4 GR 8 PLT NUT LOCK 3/8-16 NYLON INSERT LEVEL BAR SPRING ROD HHCS 3/4-10X2 GR8 SPRING COMP 4.5ODX125WX13L H - BRACKET SPRING GUIDE NUT HEX 1 1/2-6 PLT NUT HEX JAM 1 1/2-6 PLT BUSHING CYL 1 1/4 X 1 X 1 PIN CLVS 0X3.38 USBL WASHER MACH 5X00X.075 PIN COTTER 3/16 X 2 10/01/ P

18 Wing Assembly Table of Contents Part Number Index P /01/18

19 Wing Assembly Table of Contents Part Number Index Section 2: Frames Ref. Part No. Part Description Comments Revision dwgtp H H H H H H H H H H H H C C C D C C C C C D C C C C C C C C C C C D C C C C C C C Imag No. WING FRAME LH - UD 30/3350 WING FRAME RH - UD 30/3350 WING FRAME LH - UD2600 WING FRAME RH - UD260 WING BRACE LH -USD30/3300 WING BRACE RH - UD30/3300 WING BRACE LH - UD2600 WING BRACE RH - UD2600 GANG BAR - RL - UD30/3300 GANG BAR - RR - UD30/3300 GANG BAR - RL - UD2600 GANG BAR - RR - UD2600 CYL REP 4X10X38 ROD (TIE) EYE BOLT 1 1/4 X 9 1/2 LONG NUT HEX JAM 1 1/4-7 PLT HINGE PIN SHORT DISK PIN SPIROL 3/8 X 2 1/2 PLATED SLEEVE BEARING 25 ID X 5 L U-BOLT 3/4-10X4 1/32X4 1/2 WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT PIN-1DX6.5 WASHER MACH 75 X 00 X 18GA SNAP RING EXT 1 HEAVY PIN HDLS PVT 25X7.75 HRDN HHCS 1/2-13X2 5/8 GR8 SPTHD NUT HEX TOP LOCK 1/2-13 PLT HHCS 1-8X2 1/2 GR5 NUT HEX 1-8 PLT WASHER LOCK SPRING 1 PLT BUSHING CYL 1 1/4 X 1 X 1 HHCS 3/4-10X2 GR8 NUT HEX LOCK 1-8 PLT HOSE TRAY CAP RHSNB 5/16-18X2 GR5 NUT HEX 5/16-18 PLT WASHER LOCK SPRING 5/16 PLT WASHER FLAT 1 SAE DECAL CUTTING OF FOOT DECAL GP&LOGO HARVEST/3X20 STR DECAL - SPEEDBLADE Models UD3000 & 3300 (Shown) Models UD3000 & 3300 Models UD2600 Models UD2600 Models UD3000 & 3300 (Shown) Models UD3000 & 3300 Models UD2600 Models UD2600 Models UD3000 & 3300 (Shown) Models UD3000 & 3300 Models UD2600 Models UD2600 Used for rear attachment bar option. 10/01/ P

20 Table of Contents Lights & Fold Sensor Part Number Index P /01/18

21 Table of Contents Part Number Index Section 2: Frames Lights & Fold Sensor Ref. Part No. Part Description Comments Revision dwgtp C C C C C D C H H D D C D D C C C C C C C C C C C C C C C C C C C H H Image No. LIGHT HARNSS LEAD W/ VALVE LIGHT HARNESS DUAL AMBER - LED LIGHT HRNSS ENHANCE MODULE FOLD ASSIST HARNESS - LED PROXIMITY SENSOR POSITION SENSOR HOLDER LIGHT, AMBER LAMP LED EXT TM LIGHT BRKT LF/RR EXT TM LIGHT BRKT RF/LR UD BRAKE LIGHT BRACKET LIGHT MOUNTING BRACKET LIGHT, RED LAMP - LED SMV POST SMV BRACKET-SD 26' DECAL SLOW MOVING-GALV. BACKED DECAL REFLECTOR AMBER 2X9 HHCS 1/4-20X1 1/4 GR5 NUT LOCK 1/4-20 PLT HHCS 1/2-13X1 1/2 GR5 NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT U-BOLT 1/2-13 X 5 1/32 X 4 1/2 WASHER FLAT 1/2SAE PPLT SCREW PAN HD 1/4-20 X 3/4 WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT HHCS 5/16-18X3 1/2 GR5 HHCS 5/16-18X5 GR5 WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT NUT HEX LOCK 1-8 PLT DECAL REFLECTOR RED 2X9 DECAL REFLECTOR ORANGE 2X9 LIGHT BKT - LH LIGHT BKT - RH Includes nuts Used only on the front Used only on the front See Layouts in Pre-Delivery Manual for location Replaced by D Models 3000 & 3300 Models 2600 Models 2600 & 3000 Models 3300 Shown 10/01/ P

22 Table of Contents Part Number Index Center Transport Assembly UD2600 & UD3000 (Applies to UD2600, UD3000 only) P /01/18

23 Table of Contents Part Number Index Section 3: Transport Center Transport Assembly UD2600 & UD3000 (Applies to UD2600, UD3000 only) Ref. Part No. Part Description Comments Revision dwgtp H S C C D D D C H C H C C D C C C C C C C C C C C C C C D C C C C C C C C D Image No. TORQUE TUBE-SD WALKING BEAM ASSEMBLY HHCS 1/2-13X6 GR8 NUT HEX TOP LOCK 1/2-13 PLT SPINDLE PIVOT TURBO-CHISEL PLASTIC COLLAR WEAR RING HHCS 3/4-10 PLT WALKING AXLE BRACKET RUBBER 5.18ODX3.04IDX5.12 WALKING AXLE RECEIVER WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT PIVOT SPINDLE WASHER WASHER MACH 2.25 X 50 X 1 NUT HEX SLOTTED 1 1/2-12 PLT PIN COTTER 1/4 X 3 PLT HUB 8-BLT SPNDL 2.75X HHCS 1/2-13X4 1/2 GR5 NUT HEX TOP LOCK 1/2-13 PLT TIRE/WHL 380/55R16.5 BUCKSKIN WHEEL 16.5X12 8BOLT 6PILOT BKSN TIRE GOOD YEAR 380/55R16.5 LD F NUT LUG 5/8-18 X 90 DEG PLT DECAL CAUTION TIRE73PSI/ GREASE CAP X.28 NUT HEX SLOTTED 1-14 PIN COTTER 3/16 X 1 3/4 PLT 1 HARDENED SPINDLE WASHER BRG CONE 62IDX.78WD #LM BRG CUP 2.89ODX.58WD #LM NUT LUG 5/8-18 X 90 DEG PLT HUB 608 W/CUPS 8-BOLTS 8" BC HUB STUD 5/8-18X2 1/2 GR5 BRG CONE 2.16ID JLM BRG CUP 3.54OD JLM ESP SEAL KSLY NCO AXLE SPINDLE 2.75X15.5 Q45-8B Models 2600 & 3000 Includes items 3-17 Includes items /01/ P

24 Table of Contents Center Transport Assembly UD3300 Part Number Index (Applies to UD3300 only) P /01/18

25 Table of Contents Part Number Index Section 3: Transport Center Transport Assembly UD3300 (Applies to UD3300 only) Ref. Part No. Part Description Comments Revision TP H S C C D D D C H C H C C D C C C C C C C C C C C C C C D C C D C C P P C Image No. TORQUE TUBE - UD3300 WALKING BEAM ASSEMBLY SD WIDE HHCS 1/2-13X6 GR8 NUT HEX TOP LOCK 1/2-13 PLT SPINDLE PIVOT TURBO-CHISEL PLASTIC COLLAR WEAR RING HHCS 3/4-10 PLT WALKING AXLE BRACKET RUBBER 5.18ODX3.04IDX5.12 WALKING AXLE RECEIVER WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT PIVOT SPINDLE WASHER WASHER MACH 2.25 X 50 X 1 NUT HEX SLOTTED 1 1/2-12 PLT PIN COTTER 1/4 X 3 PLT 8 BOLT HUB SPINDLE 10,000 LBS HHCS 3/4-13X5 GR5 NUT HEX TOP LOCK 3/4-10 PLT TIRE/WHEEL ASSY 440/55R18 BKSN WHEEL 18X14 8-BOLT 0 OFFST BKS TIRE - TITAN 440/55R18 NUT HEX FLANGE 3/4-16 PLT DECAL CAUTION TIRE 73PSI/295 GREASE CAP X.28 NUT HEX SLOTTED 1-14 PIN COTTER 7/32 X 2 1 HARDENED SPINDLE WASHER BRG CONE 62IDX.78WD #LM BRG CUP 2.89ODX.58WD #LM SPINDLE 3.00 X GKN HUB ASY; 8-BOLT, LBS HUB STUD 3/4-16X2 9/16 GR5 GKN BRG CONE TIMKEN ONLY GKN BRG CUP, TIMKEN SEAL 3.00 X X.5 KSLY Includes items 3-17 Includes items Includes items 22 & 23 10/01/ P

26 Table of Contents Wing Transport Assembly Part Number Index P /01/18

27 Table of Contents Part Number Index Section 3: Transport Wing Transport Assembly Ref. Part No. Part Description Comments Revision dwgtp D C C C C C C C C C C C C C C C C C C H H H H C Image No. AXLE SPINDLE 2.25X16.5 Q45-8B SEAL GREASE 2.25X3.061X0.300 BRG CONE 78ID LM BRG CUP 3.06OD LM HUB 458 W/CUPS 8-BOLTS 8" BC BEARING CUP LM BEARING CONE LM WASHER FLAT 3/4 HARD USS NUT HEX SLOTTED 3/4-16 PIN COTTER 5/32 X 1 1/2 LONG GREASE CAP 2.448X12X.25 HUB STUD 5/8-18X2 1/2 GR5 NUT LUG 5/8-18 X 90 DEG PLT HUB 8-BOLT SPNDL 2.25X HHCS 5/16-18X4 GR8 PLT NUT HEX TOP LOCK 5/16-18 PLT WHEEL 15X10 8 BOLT BUCKSKIN TIRE 12.5L X PLY TIRE/WHL 12.5LX15 12 PLY BKSN TORQUE TUBE - SD LH TORQUE TUBE - SD RH TORQUE TUBE - SD LH TORQUE TUBE - SD RH DECAL CAUTION TIRE 52 PSI Include items 1-13 Includes items 17 & 18 Shown Models 3000 & 3300 Models 3000 & 3300 Models 2600 only has 1 wheel/tire Models 2600 only has 1 wheel/tire 10/01/ P

28 Table of Contents Gauge Wheel Assembly Part Number Index P /01/18

29 Table of Contents Part Number Index Section 3: Transport Gauge Wheel Assembly Ref. Part No. Part Description Comments Revision dwgtp H H H H H D D H H H C C C C C C C C C C C C C C C C C C C C C C D C C C C C C C C D C C C C C Image No. GAUGE WHEEL PIVOT GAUGE WHL PVT ARM-SDH LH GAUGE WHL PVT ARM - SDH RH GAUGE WHEEL ARM GAUGE WHEEL ARM CASTER INNER PIVOT TUBE CASTER INNER PIVOT TUBE GAUGE WHEEL MOUNT CASTER GAGE WHEEL TOP COLLAR CASTER GAGE WHEEL SPRING COVER HHCS 1/2-13X4 GR5 HHCS 1-8X10 GR5 PLT HHCS 1-8X12 1/4 GR8 NUT HEX JAM 1-8 PLT NUT HEX 1-8 PLT NUT HEX TOP LOCK 1/2-13 PLT WASHER LOCK SPRING 1 PLT WASHER FLAT 1 SAE SPRING COM 1 13/16ODX3/8WX2 3/4 TIRE/WHL 12.5LX15 12 PLY BKSN HUB 8-BOLT SPNDL 2.25X SLEEVE BEARING 1 5/8 I.D. SLEEVE BEARING 2 1/2 ID BUSHING CYL 1 1/4 X 1 X 1 GREASE CAP 2.448X.25X13 NUT HEX SLOTTED 3/4-16 PIN COTTER 5/32 X 1 1/2 LONG WASHER FLAT 3/4 HARD USS BRG CONE 25ID LM HUB 458 W/CUPS 8-BOLT 8" BC BRG CONE 78ID LM SEAL GREASE 2.25X3.061X0.300 AXLE SPINDLE 2.25X13.25 Q45-8B HUB STUD 5/8-18X2 1/4 GR5 NUT LUG 5/8-18 X 90 DEG PLT WHEEL 15X10 8 BOLT BUCKSKIN TIRE 12.5L X PLY HHCS 3/4-10X2 GR5 WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT CYL REP 3.75X10X38 ROD (TIE) EYE BOLT 1 1/4X9 1/2 W/KEYWAY NUT HEX JAM 1 1/4-7 PLT PIN CLVS 0X3.13 USBL WASHER MACH 5X00X.075 GREASE ZERK STRAIGHT 1/4-28 DECAL CAUTION TIRE 52 PSI Shown Includes items Includes items Use C PIN COTTER 3/16 X 2 TO SECURE 10/01/ P

30 Table of Contents Hydraulic Level System Part Number Index P /01/18

31 Table of Contents Part Number Index Section 4: Hydraulics Hydraulic Level System Ref. Part No. Part Description Comments Revision dwgtp C C C C C C C C C C C C S C D C C C H C S C C D C C C C H Image No. CYL 3.50X6X50 EL 3/4MJIC 3/4MORB EL 45MORB 3/4MJIC HH3/8R /4FJIC HH3/8R /4FJIC LOCK VALVE HHCS 1/4-20X1 1/2 GR2 WASHER LOCK SPRING 1/4 PLT WASHER FLAT 3/8 SAE PLT DECAL DISK HARROW LEVELER HYDRAULIC HOSE HOLDER 3/8" HH3/8R /4MORB 3/4FJIC HG PAIR - RED MORB-FORB CP 3/4FORB MALE QD POPPET TYPE ORIFICE PLATE 1/16 3/4 HG HANDLE - RED RET HG HANDLE - RED EXT AD 3/4MORB 3/4FORB (HG) LEVEL GAUGE MOUNT HHCS 3/8-16X1 1/4 GR5 LINK 3/8 ROD END 3/8-24 UNF RH THD NUT HEX JAM 3/8-24 PLT BAR RND-3/8THDX23.63 NUT HEX JAM 3/8-24 LH 3/8 ROD END 3/8-24 UNF LH THD NUT LOCK 3/8-16 PLT NUT HEX JAM 5/8-11 PLT GAUGE FORE AFT Includes items Includes items /01/ P

32 Table of Contents Hydraulic Lift System Part Number Index P /01/18

33 Table of Contents Part Number Index Section 4: Hydraulics Hydraulic Lift System Ref. Part No. Part Description Comments Revision dwgtp C C C S C C C D C C C C C D C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C Image No. HG HANDLE - BLACK RET HG HANDLE - BLACK EXT AD 3/4MORB 3/4FORB (HG) HG PAIR - BLACK MORB-FORB CP 3/4FORB MALE QD POPPET TYPE HYDRAULIC HOSE HOLDER 3/8" HYDRAULIC HOSE HOLDER 1/2" HYD HOSE HOLDER TOP PLATE HOSE CLIP 9/16 ID WASHER LOCK SPRING 5/16 PLT HHCS 5/16-18X3 GR5 HHCS 5/16-18X1 GR5 HHCS 5/16-18X1 3/4 GR5 HOSE WRAP, LARGE SIZE, SHORT (8") AD 3/4MORB 3/4MJIC COUNTERBALANCE VALVE MAN. T.T. EL 45 3/4MORB 3/4MJIC HH1/2R /4FJIC 3/4MORB HH1/2R /4FJIC 3/4FJIC HH1/2R /4FJIC HH1/2R /4FJIC HHCS 5/16-18X2 GR5 HYD VALVE DEPTH CONTROL CROSS EL 3/4MJIC 3/4MORB PL 3/4MORB HOLLOW HEX EL 3/4FJIC 3/4MJIC TE3/4MJICBH 3/4MJIC 3/4MJIC HH1/2R /4FJIC HH1/2R /4FJIC HH1/2R /4FJIC HH1/2R /4FJIC HH1/2R /4FJIC HH1/2R /4FJIC HH1/2R /4FJIC HH1/2R /4FJIC HH1/2R /4FJIC HH1/2R /4FJIC CYL REP 4.25X10X50 ROD (TIE) CYL REP 4.5X10X2 ROD (TIE) CYL REP 4X10 38 ROD (TIE) CYL REP 3.75X10X38 ROD (TIE) EL 3/4MJIC BLKHD 45 W/ LN EL 3/4MJIC BLKHD W/ LN HHCS 5/16-18X4 GR5 NUT HEX 5/16-18 PLT Includes items 1-3 Location on machine depends which is used Location on machine depends which is used Location on machine depends which is used Models UD2600 & 3000 Models UD3300 Models UD2600 & 3000 Models UD3300 Models UD2600 Models UD3000 & 3300 Models UD2600 Models UD3000 & 3300 Models 2600 Models 3000 & 3300 All Models All Models 10/01/ P

34 Table of Contents Fold Hydraulics UD2600 Part Number Index (Applies to UD2600 only) P /01/18

35 Table of Contents Part Number Index Section 4: Hydraulics Fold Hydraulics UD2600 (Applies to UD2600 only) Ref. Part No. Part Description Comments Revision dwgtp C C C S C C C D C C C C C C C D C C C C C C C C D C C C D C C C C D C C C C C C C C Image No. HG HANDLE - GREEN RET HG HANDLE - GREEN EXT AD 3/4MORB 3/4FORB (HG) HG PAIR - GREEN MORB-FORB CP 3/4FORB MALE QD POPPET TYPE HYDRAULIC HOSE HOLDER 3/8" HYDRAULIC HOSE HOLDER 1/2" HYD HOSE HOLDER TOP PLATE HOSE CLIP 9/16 ID WASHER LOCK SPRING 5/16 PLT HHCS 5/16-18X3 GR5 HHCS 5/16-18X1 GR5 HHCS 5/16-18X1 3/4 GR5 HH1/2R /4FJIC 3/4MORB HH3/8R /4FJIC HOSE WRAP, LARGE SIZE, SHORT (8") FILTER INLINE 3/4MORB 3/4MJIC EL 3/4MORB X 3/4FORB VALVE, TWO WAY, 3/4 FORB EL 3/4MJIC 3/4MORB HH3/8R /4FJIC AD 3/4MORB 3/4FJIC HH3/8R /4FJIC HH3/8R /4FJIC DOUBLE HYD TEE BLOCK AD 3/4MORB 3/4MJIC FIXED BYPASS DOWN PRESS VALVE HHCS 5/16-18X4 1/2 GR5 ORIFICE PLATE 1/16 3/4 CYL 5X30X2 ROD (TIE) PRESSURE GAUGE 3000 PSI AD 9/16MORB 1/4FNPT PRESSURE GAUGE DECAL VALVE BRACKET - SINGLE DP HHCS 3/8-16X1 3/4 GR5 EL 3/4MJIC BLKHD W/ LN HHCS 5/16-18X3 1/2 GR5 NUT HEX 5/ PLT PIN CLVS 25X3.63 USBL PIN CLVS HDLS 25X3.25 USBL WASHER MACH 1 7/8X1 1/4X 14GA PIN COTTER 3/16 X 2 Includes items 1-3 Location on machine depends which is used Location on machine depends which is used Location on machine depends which is used Use C & C to secure to bracket Used on Center Cylinders Rod End only Use C & C to secure to Center Frame Used on Base end Used on Rod end 10/01/ P

36 Table of Contents Fold Hydraulics UD3000 & UD3300 Part Number Index (Applies to UD3000, UD3300 only) P /01/18

37 Table of Contents Part Number Index Section 4: Hydraulics Fold Hydraulics UD3000 & UD3300 (Applies to UD3000, UD3300 only) Ref. Part No. Part Description Comments Revision dwgtp C C C S C C C D C C C C C C C D C C C C C C C C C C D C C C D C C C C D C C C C C C C C Image No. HG HANDLE - GREEN RET HG HANDLE - GREEN EXT AD 3/4MORB 3/4FORB (HG) HG PAIR - GREEN MORB-FORB CP 3/4FORB MALE QD POPPET TYPE HYDRAULIC HOSE HOLDER 3/8" HYDRAULIC HOSE HOLDER 1/2" HYD HOSE HOLDER TOP PLATE HOSE CLIP 9/16 ID WASHER LOCK SPRING 5/16 PLT HHCS 5/16-18X3 GR5 HHCS 5/16-18X1 GR5 HHCS 5/16-18X1 3/4 GR5 HH1/2R /4FJIC 3/4MORB HH3/8R /4FJIC HOSE WRAP, LARGE SIZE, SHORT (8") FILTER INLINE 3/4MORB 3/4MJIC EL 3/4MORB X 3/4FORB VALVE, TWO WAY, 3/4 FORB EL 3/4MJIC 3/4MORB HH3/8R /4FJIC HH3/8R /4FJIC AD 3/4MORB 3/4FJIC HH3/8R /4FJIC HH3/8R /4FJIC HH3/8R /4FJIC DOUBLE HYD TEE BLOCK AD 3/4MORB 3/4MJIC FIXED BYPASS DOWN PRESS VALVE HHCS 5/16-18X4 1/2 GR5 ORIFICE PLATE 1/16 3/4 CYL 4X30X2 TIR CL 3000# PRESSURE GAUGE 3000 PSI AD 9/16MORB 1/4FNPT PRESSURE GAUGE DECAL VALVE BRACKET - SINGLE DP HHCS 3/8-16X1 3/4 GR5 HH3/8R /4FJIC TE 3/4MJIC RUN BLKHD W/ LN HHCS 5/16-18X3 1/2 GR5 HHCS 5/16-18X4 1/2 GR5 HHCS 5/16-18X3 3/4 GR5 HHCS 5/16-18X5 GR5 NUT HEX 5/16-18 PLT Includes items 1-3 Location on machine depends which is used Location on machine depends which is used Location on machine depends which is used Models UD3000 Models UD3300 Models UD3000 Models UD3300 Use C & C to secure to bracket Used on Center Cylinders Rod End only Use C & C to secure to Center Frame UD3000 UD3300 UD3000 UD /01/ P

38 Table of Contents Part Number Index Hydraulic Cylinder ( C 4X10X38 ROD) P /01/18

39 Table of Contents Part Number Index Section 4: Hydraulics Hydraulic Cylinder ( C 4X10X38 ROD) Ref. Part No. Part Description Comments Revision dwg M7016-ADI 2M6816 3R5840 4R5109 5R5118 6R5164-ADI 7M6318 2A0024 2A C C C C C Image No. MIDWAY HARDENED CLEVIS ADI MW ROD 1 3/8 DIA MW HEAD MW PISTON MIDWAY TUBE MIDWAY ADI BASE MW TIE ROD 4 X 10 CYLINDER MW WIPER SEAL U-CUP O-RING MIDWAY BACK UP MIDWAY TEFLON SEAL LOADER WEAR RING O-RING MW PISTON NUT 1-14 MW TIE ROD NUT NUT HEX 3/8-16 PLAIN HHCS 3/8-16X1 3/4 GR5 SEAL KIT MW 4 RPH CYL 4A5103 PIN CLEVIS 1 X 3 1/8 USABLE PIN COTTER 3/16 X 2 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Only in item 20 10/01/ P

40 Table of Contents Part Number Index Hydraulic Cylinder ( C 3.75X10X38 ROD) P /01/18

41 Table of Contents Part Number Index Section 4: Hydraulics Hydraulic Cylinder ( C 3.75X10X38 ROD) Ref. Part No. Part Description Comments Revision dwg M7016-ADI 2M6816 3R4840 4R4109 5R4118 6R4164-ADI 7M6318 2A0024 2A C C C C C Image No. MIDWAY HARDENED CLEVIS ADI MW ROD 1 3/8 DIA MW HEAD PISTON MIDWAY MIDWAY TUBE MIDWAY ADI BASE MW TIE ROD 4 X 10 CYLINDER MW WIPER SEAL U-CUP O-RING MIDWAY BACK UP MIDWAY TEFLON SEAL LOADER WEAR RING O-RING MW PISTON NUT 1-14 MW TIE ROD NUT NUT HEX 3/8-16 PLAIN HHCS 3/8-16X1 3/4 GR5 SEAL KIT MW 3.75X375 4A4103 PIN CLEVIS 1 X 3 1/8 USABLE PIN COTTER 3/16 X 2 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Only in item 20 10/01/ P

42 Table of Contents Part Number Index Hydraulic Cylinder ( C 4.25X10X50 ROD) (Applies to UD2600 only) P /01/18

43 Table of Contents Part Number Index Section 4: Hydraulics Hydraulic Cylinder ( C 4.25X10X50 ROD) (Applies to UD2600 only) Ref. Part No. Part Description Comments Revision dwg M7021-ADI 2S7516NC 3R6940 4R6109 5R6118 6R6164-ADI 7M7318 2A C C C C C C Image No. MW ROD CLEVIS 00PN 5-12THD MIDWAY ROD MW HEAD PISTON MIDWAY MIDWAY TUBE MIDWAY ADI BASE MIDWAY TIE ROD F/ 4 1/4 X 10 MW WIPER U-CUP O-RING MIDWAY BACK UP MIDWAY TEFLON SEAL LOADER WEAR RING MW PISTON NUT SEAL MW PISTON NUT 1-14 NUT HEX 3/4-16 PLAIN NUT HEX 3/8-16 PLAIN HHCS 3/8-16X1 3/4 GR5 SEAL KIT MW 4.25 RPHCYL 4A6104 PIN CLEVIS 1 X 3 1/8 USABLE PIN COTTER 3/16 X 2 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Only in item 20 10/01/ P

44 Table of Contents Part Number Index Hydraulic Cylinder ( C 4X30X2 ROD) (Applies to UD3000, UD3300 only) P /01/18

45 Table of Contents Part Number Index Section 4: Hydraulics Hydraulic Cylinder ( C 4X30X2 ROD) (Applies to UD3000, UD3300 only) Ref. Part No. Part Description Comments Revision dwg M7021-ADI 2S6676NC 3R6012 4M6108 5M6138 6R5162-ADI 7M6338 2A0024 2A C C C C C Image No. MW ROD CLEVIS 00PN 5-12THD MIDWAY ROD HEAD MIDWAY MW PISTON MIDWAY TUBE MIDWAY ADI BASE MIDWAY TIE ROD MW WIPER U-CUP O-RING MIDWAY BACK UP MIDWAY CROWN SEAL MIDWAY MW PISTON NUT SEAL MW PISTON NUT 1-14 MW TIE ROD NUT NUT HEX 3/8-16 PLAIN HHCS 3/8-16X1 3/4 GR5 CYL SEAL KIT 4 X 16 MW 5A6106 PIN CLEVIS 1 X 3 1/8 USABLE PIN COTTER 3/16 X 2 Only in item 18 Only in item 18 Only in item 18 Only in item 18 Only in item 18 Only in item 18 10/01/ P

46 Table of Contents Center Gang Assembly Part Number Index P /01/18

47 Table of Contents Part Number Index Section 5: Gangs Center Gang Assembly Ref. Part No. Part Description Comments Revision dwgtp H H H H H S S C D C C C Image No. CENTER BRACE BAR UD26/3000 CENTER BRACE BAR - UD3300 CENTER BREAKER HANGER GANG BAR - RC - UD26/3000 GANG BAR - RC - UD3300 SPRING SHANK ASSY RH - UD SPRING SHANK ASSY LH - UD DISK HUB - 25" BOLT RETAINER RHSNB 3/4-10X6 GR8 PLT FTHD RHSNB 5/8-11X6 GR8 PLT FTHD DISC 24X88CONC-V UD2600 & 3000 UD3300 All Models UD2600 & 3000 UD3300 Used on rear gang bar only. See layout for locations For hardware break down see Shank & Blade Assy For hardware break down see Shank & Blade Assy 10/01/ P

48 Table of Contents Wing Gang Assembly - Left Part Number Index P /01/18

49 Table of Contents Part Number Index Section 5: Gangs Wing Gang Assembly - Left Ref. Part No. Part Description Comments Revision dwgtp H H H H S S C C C C D H C C Imange No. WING BRACE LH - UD30/3300 WING BRACE LH - UD2600 GANG BAR - RL - UD30/3300 GANG BAR - RL - UD2600 SPRING SHANK ASSY RH - UD SPRING SHANK ASSY LH - UD DISC 24X88CONC-V DISC 22X50CONC-V DISC 20X25CONC-V DISC HUB - 25" C-FLEX PLATE C-FLEX PLATE WELDMENT - LH RHSNB 3/4-10X6 GR8 PLT FTHD RHSNB 5/8-11X6 GR8 PLT FTHD Used on inside most location on Rear Wing Gang For hardware break down see Shank & Blade Assy For hardware break down see Shank & Blade Assy 10/01/ P

50 Table of Contents Wing Gang Assembly - Right Part Number Index P /01/18

51 Table of Contents Part Number Index Section 5: Gangs Wing Gang Assembly - Right Ref. Part No. Part Description Comments Revision dwgtp H H H H S S C C C C D H C C Image No. WING BRACE RH - UD30/3300 WING BRACE RH - UD2600 GANG BAR - RR - UD30/3300 GANG BAR - RR - UD2600 SPRING SHANK ASSY RH - UD SPRING SHANK ASSY LH - UD DISC 24X88CONC-V DISC 22X50CONC-V DISC 20X25CONC-V DISC HUB - 25" C-FLEX PLATE C-FLEX PLATE WELDMENT - RH RHSNB 3/4-10X6 GR8 PLT FTHD RHSNB 5/8-11X6 GR8 PLT FTHD Used on inside most location on Rear Wing Gang For hardware break down see Shank & Blade Assy For hardware break down see Shank & Blade Assy 10/01/ P

52 Table of Contents Shank & Blade Assembly Part Number Index P /01/18

53 Table of Contents Part Number Index Section 5: Gangs Shank & Blade Assembly Ref. Part No. Part Description Comments Revision dwgtp H H D C C C D C C H H C C C S S C C C C C C C C C Image No. C-FLEX PLATE WELDMENT - LH C-FLEX PLATE WELDMENT - RH C-FLEX PLATE NUT HEX FLG TOP LK 3/4-10 PLT RHSNB 3/4-10X6 GR8 PLT FTHD RHSNB 5/8-11X6 GR8 PLT FTHD BOLT RETAINER SPRING SHANK RH X 3 SPRING SHANK LH X 3 SHANK HUB MNT WLDMNT - RH SHANK HUB MNT WLDMNT - LH SPRING SHANK HELPER X 3 HHCS 3/4-10X2 1/2 GR5 NUT HEX TOP LOCK 3/4-10 PLT SPRING SHANK ASSY RH - UD SPRING SHANK ASSY LH - UD DISC HUB - 25" NUT HEX TOP LOCK 1 1/4-7 PLT DISC 24X88CONC-V DISC 22X50CONC-V DISC 20X25CONC-V NUT HEX 5/8-11 PLT WASHER LOCK SPRING 5/8 PLT HHCS 1/2-13X1 GR5 NYL WASHER LOCK SPRING 1/2 PLT Shown Front bolts Rear bolt Used on Rear center gang bar only see layout for locations Shown Shown Includes items 7-11 Includes items 7-11 See Layouts for locations See Layouts for locations See Layouts for locations Used with rear bolt Used with rear bolt 10/01/ P

54 Table of Contents Furrow Filler Assembly Part Number Index P /01/18

55 Table of Contents Part Number Index Section 5: Gangs Furrow Filler Assembly Ref. Part No. Part Description Comments Revision dwgtp C H H H C C C Image No. 5-SIDED BLADE FURROW FILLER FURROW FILLER SCRAPER LH FURROW FILLER SCRAPER RH HHCS 1/2-13X1 1/2 GR5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT Shown 10/01/ P

56 Table of Contents Weight Package (Option) Part Number Index P /01/18

57 Table of Contents Part Number Index Section 6: Options Weight Package (Option) Ref. Part No. Part Description Comments Revision dwgtp S D D C C D C C A D D C C Image No. 750 LB WEIGHT ASSEMBLY PART LB WEIGHT ASSY PART LB WEIGHT ASSY HHCS 3/4-10X12 GR5 PLT WASHER FLAT 3/4 SAE PLT PART - WEIGHT BOX WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT 1500LB TT CENTER FRAME WGT KIT WEIGHT BOX STOP U-BOLT 1/2-13 X 4 1/32 X 5 1/4 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT 10/01/ P

58 Table of Contents Part Number Index 2 Row Coiltine & Crumbler Attachment Assembly P /01/18

59 Table of Contents Part Number Index Section 7: Attachments 2 Row Coiltine & Crumbler Attachment Assembly Ref. Part No. Part Description Comments Revision dwgtp H C C C C C C C H C C C C C C V C H H L C D D D C C C S C H H C H D C C C H C C D C D C C C H H H H H H H C D H H Image No. COILTINE 24 MOUNT BRACKET U-BOLT 3/4-10 X 4 1/32 X 4 1/2 WASHER MACH 5 X 00 X.075 SNAP RING EXT 1 HEAVY PIN - SNAP RING 1 X 5.75 USABLE WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT HHCS 1/2-13 X 3 1/4 GR5 PARALLEL LINK U-BOLT 5/8-11 X 3 1/32 X 4 1/4 GR5 WASHER LOCK SPRING 5/8 PLT HHCS 1/2-13X4 1/2 GR5 FTHD WASHER FLAT 1/2 HARD ASTMF436 NUT HEX 5/8-11 PLT NUT HEX 1/2-13 PLT HEAVY SPRING/PLUG SUB ASSY NUT HEX TOP LOCK 1/2-13 PLT PARALLEL LINK PARALLEL LINK BRACKET COILTINE 24 DRAG ARM HHCS 1/2-13X2 5/8 GR8 SPTHD 24" COILTINE 3-TINE TUBE 24" COILTINE 4-TINE TUBE 24" COILTINE 5-TINE TUBE CYL 2X2.5X12 ROD (TIE ROD) PIN CLVS 0X2.75 USBL PIN COTTER 3/16 X 2 SEEDBED CONDITIONER ARM NUT HEX TOP LOCK 5/8-11 PLT DRAG ARM DRAG ARM BUSHING CYL 1 1/4 X 1 X 1 COILTINE 2-ROW PIVOT BRACKET ADJUSTMENT STRAP 2-ROW U-BOLT 5/8-11X3 1/32X4 1/2 SPT WASHER FLAT 3/4 SAE PLT SHOULDER BOLT 5/8-11X1 3/4 REEL BRG HANGER SC HHCS 1-8X4 GR5 RHSNB 1/2-13X1 1/2 GR5 1 HARDENED SPINDLE WASHER BEARING FLG 1 1/2ID 5 IN SQ REEL BRG SPACER WASHER FLAT 1/2 SAE PLT WASHER LOCK SPRING 1 PLT NUT HEX 1-8 PLT REEL BASKET 45 RH REEL BASKET 45 LH REEL BASKET 60 RH REEL BASKET 60 LH REEL BASKET 75 LH REEL BASKET RH REEL BASKET LH SNAP RING 2 3/4 BUSHING ID DRAG FRAME 74 2-ROW DRAG FRAME 26 2-ROW Includes items 1-19 UD3000 UD3300 UD2600, 3000, 3300 UD2600 UD2600 UD2600, 3000, 3300 UD3000 UD2600, 3000, 3300 UD2600 UD2600 UD2600, 3000, 3300 UD /01/ P

60 Table of Contents Part Number Index 2 Row Coiltine & Crumbler Attachment Assembly (continued) Ref Part No H C H C C D D H H D D D D D D C K K D D H C C Part Description DRAG FRAME 50 2-ROW HHCS 1/2-13X3 1/2 GR5 COILTINE 2-ROW PIVOT ADJUSTER RHSNB 1/2-13X4 1/2 GR8 PLT COILTINE 24 X 12 X 9/16 COILTINE STOP COIL TINE STOP REAR BAR REAR BAR TUBE - 3 X 4 TUBE - 3 X 4 TUBE SQ-3X.25 TUBE SQ-3X.25 TUBE - 3 X 3 TUBE - 3 X 3 PIN 25 X 6.75 HRD PLT 24" COILTINE EXT LH 24" COILTINE EXT RH TUBE RND - 2" OD TUBE RND - 2 3/8" OD 24" COILTINE SINGLE-TINE EXT. COILTINE 24 X 9/16 SINGLE LH COILTINE 24 X 9/16 SINGLE RH Comments UD3300 Use Nut C to secure UD2600, 3000 Center Section UD3300 Center Section UD3000, 3300 UD2600 UD3000 UD2600, 3000, 3300 UD3300 UD2600 Includes items 17, 51, 53, Used on Models 3000 Includes items 17, 51, 53, & 64 Used on Models 3000 Revision P /01/18

61 Table of Contents Part Number Index Section 7: Attachments 2 Row Coiltine & Crumbler Attachment Assembly (continued) This Page Intentionally Left Blank 10/01/ P

62 Table of Contents Part Number Index 2 Row Coiltine & Crumbler Hydraulic System UD2600 (Applies to UD2600 only) P /01/18

63 Table of Contents Part Number Index Section 7: Attachments 2 Row Coiltine & Crumbler Hydraulic System UD2600 (Applies to UD2600 only) Ref. Part No. Part Description Comments Revision dwgtp C C C S C C C C C D C C C C C C C C C D C C C C C Image No. HG HANDLE - YELLOW RET HG HANDLE - YELLOW EXT AD 3/4MORB 3/4FORB (HG) HG PAIR - YELLOW MORB-FORB CP 3/4FORB MALE QD POPPET TYPE CP 3/4FORB QD FLATFACE HH3/8R /4MORB 3/4FJIC EL 3/4MJIC 3/4MORB AD 3/4MORB 3/4MJIC HOSE WRAP, LARGE SIZE, SHORT (8") HH3/8R /4FJIC EL 45 3/4MJIC 3/4FJIC TE 3/4MJICBH 3/4MJIC 3/4MJIC HH3/8R /4FJIC HH3/8R /4FJIC HH3/8R /4FJIC HH3/8R /4FJIC EL 3/4MJIC BLKHD W/ LN EL 45 3/4MORB 3/4MJIC DOWN PRESSURE VALVE BRACKET DOWN PRESSURE VALVE W/RELIEF PRESSURE GAUGE 3000 PSI AD 9/16MORB 1/4FNPT HHCS 5/16-18X4 1/2 GR5 HH3/8R /4FJIC Includes items 1-3 Use C and C to secure valve to bracket 10/01/ P

64 Table of Contents Part Number Index 2 Row Coiltine & Crumbler Hydraulic System UD3000 (Applies to UD3000 only) P /01/18

65 Table of Contents Part Number Index Section 7: Attachments 2 Row Coiltine & Crumbler Hydraulic System UD3000 (Applies to UD3000 only) Ref. Part No. Part Description Comments Revision dwgtp C C C S C C C C C D C C C C C C C C C D C C C C Image No. HG HANDLE - YELLOW RET HG HANDLE - YELLOW EXT AD 3/4MORB 3/4FORB (HG) HG PAIR - YELLOW MORB-FORB CP 3/4FORB MALE QD POPPET TYPE CP 3/4FORB QD FLATFACE HH3/8R /4MORB 3/4FJIC EL 3/4MJIC 3/4MORB AD 3/4MORB 3/4MJIC HOSE WRAP, LARGE SIZE, SHORT (8") HH3/8R /4FJIC EL 45 3/4MJIC 3/4FJIC TE 3/4MJICBH 3/4MJIC 3/4MJIC HH3/8R /4FJIC HH3/8R /4FJIC HH3/8R /4FJIC HH3/8R /4FJIC EL 3/4MJIC BLKHD W/ LN EL 45 3/4MORB 3/4MJIC DOWN PRESSURE VALVE BRACKET DOWN PRESSURE VALVE W/RELIEF PRESSURE GAUGE 3000 PSI AD 9/16MORB 1/4FNPT HHCS 5/16-18X4 1/2 GR5 Includes items 1-3 Use C and C to secure valve to bracket 10/01/ P

66 Table of Contents Part Number Index 2 Row Coiltine & Crumbler Hydraulic System UD3300 (Applies to UD3300 only) P /01/18

67 Table of Contents Part Number Index Section 7: Attachments 2 Row Coiltine & Crumbler Hydraulic System UD3300 (Applies to UD3300 only) Ref. Part No. Part Description Comments Revision dwgtp C C C S C C C C C D C C C C C C C C C C D C C C C Image No. HG HANDLE - YELLOW RET HG HANDLE - YELLOW EXT AD 3/4MORB 3/4FORB (HG) HG PAIR - YELLOW MORB-FORB CP 3/4FORB MALE QD POPPET TYPE CP 3/4FORB QD FLATFACE HH3/8R /4MORB 3/4FJIC EL 3/4MJIC 3/4MORB AD 3/4MORB 3/4MJIC HOSE WRAP, LARGE SIZE, SHORT (8") HH3/8R /4FJIC EL 45 3/4MJIC 3/4FJIC TE 3/4MJICBH 3/4MJIC 3/4MJIC HH3/8R /4FJIC HH3/8R /4FJIC HH3/8R /4FJIC HH3/8R /4FJIC HH3/8R /4FJIC EL 3/4MJIC BLKHD W/ LN EL 45 3/4MORB 3/4MJIC DOWN PRESSURE VALVE BRACKET DOWN PRESSURE VALVE W/RELIEF PRESSURE GAUGE 3000 PSI AD 9/16MORB 1/4FNPT HHCS 5/16-18X4 1/2 GR5 Includes items 1-3 UD3300 UD3300 UD3300 Use C and C to secure valve to bracket 10/01/ P