Rotary Cutter RCR2596, RCR2510 & RCRM P Parts Manual. Copyright 2017 Printed 07/14/17

Transcription

1 Table of Contents Part Number Index Rotary Cutter RCR2596, RCR2510 & RCRM P Parts Manual Read the Operator's Manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! Copyright 2017 Printed 07/14/17 Cover photo may show optional equipment not supplied with standard unit.

2 Table of Contents Part Number Index Table of Contents Section 1: Introduction...4 Using This Manual...4 Manual Replacement Information...4 Manual Revisions...4 Touch-up Paint...4 Hardware Legend...5 Replacement Hardware...5 Serial Numbers...5 Part Number Service Coding...5 Section 2: Frame Point Wheel...6 CV Trail Type Driveline...8 Deck Blade Drive S/N Deck Blade Drive S/N to Deck Blade Drive S/N Deck Components & 3-Point Hitch...16 Equal Angle Pull Type Driveline...20 Hydraulic Lift...22 Pull Type...24 Pull Type Axle and Tires...26 Section 3: Guards...28 Guarding Chain...28 Guarding Chain...30 Guarding Rubber...32 Guarding Rubber...34 Section 4: Drivelines...36 Coupler Intermediate c & c...36 Driveline 1000 RPM ( C) Eurocardan...38 Driveline 1000 RPM ( C) Eurocardan...40 Driveline 1000 RPM ( C) Eurocardan...42 Driveline 1000 RPM ( C) Eurocardan...44 Driveline 540 RPM ( C) Eurocardan...46 Driveline 540 RPM ( C) Eurocardan...48 Driveline 540 RPM ( C) Eurocardan...50 Driveline 540 RPM ( C) Eurocardan...52 Driveline 540 RPM ( C) Eurocardan...54 Driveline CV 1000 RPM ( C) Walterscheid...56 Driveline CV Pull Type Cutter 540 RPM ( C) Walterscheid...58 Driveline Flex Coupler ( C) Eurocardan...60 Driveline Flex Coupler ( C) Eurocardan...62 Driveline Slip Clutch ( ) Eurocardan...64 Driveline Slip Clutch ( ) Eurocarda...66 Driveline Slip Clutch ( ) EC...68 Driveline Slip Clutch ( ) Eurocardan...70 Driveline Slip Clutch ( ) Eurocardan...72 Driveline Slip Clutch ( ) Eurocardan...74 Driveline Slip Clutch 1000 RPM ( ) Eurocardan...76 Driveline Stub Shaft Pull Type 540 RPM ( C) Eurocardan...78 Section 5: Gearboxes...80 Gearbox ( C) Comer...80 Gearbox ( C) Comer...82 Gearbox...84 T-Box 540 RPM ( C) Comer...84 Section 6: Hydraulics...86 Hydraulic Cylinder ( C) Midway...86 Hydraulic Cylinder ( C) Red Lion...88 Section 7: Labels...90 Label Placement S/N Label Placement S/N Touch-up Paints...94 Part Number Index...96 Copyright All rights reserved. provides this publication as is without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. The illustrations in this manual are not intended for safe and proper assembly or disassembly of equipment. The illustrations are intended for ordering parts only. is registered trademark. All other brands and product names are trademarks or registered trademarks of their respective holders. Printed in the United States of America. 2 RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 07/14/17

3 Table of Contents Part Number Index Alphabetized Table of Contents 3 C 3-Point Wheel...6 Coupler Intermediate c & c...36 CV Trail Type Driveline...8 P Touch-up Paints...94 Pull Type...24 Pull Type Axle and Tires...26 D Deck Blade Drive S/N Deck Blade Drive S/N to Deck Blade Drive S/N Deck Components & 3-Point Hitch...16 Driveline 1000 RPM ( C) Eurocardan...38 Driveline 1000 RPM ( C) Eurocardan...40 Driveline 1000 RPM ( C) Eurocardan...42 Driveline 1000 RPM ( C) Eurocardan...44 Driveline 540 RPM ( C) Eurocardan...46 Driveline 540 RPM ( C) Eurocardan...48 Driveline 540 RPM ( C) Eurocardan...50 Driveline 540 RPM ( C) Eurocardan...52 Driveline 540 RPM ( C) Eurocardan...54 Driveline CV 1000 RPM ( C) Walterscheid...56 Driveline CV Pull Type Cutter 540 RPM ( C) Walterscheid...58 Driveline Flex Coupler ( C) Eurocardan...60 Driveline Flex Coupler ( C) Eurocardan...62 Driveline Slip Clutch ( ) Eurocardan...64 Driveline Slip Clutch ( ) Eurocarda...66 Driveline Slip Clutch ( ) EC...68 Driveline Slip Clutch ( ) Eurocardan...70 Driveline Slip Clutch ( ) Eurocardan...72 Driveline Slip Clutch ( ) Eurocardan...74 Driveline Slip Clutch 1000 RPM ( ) Eurocardan...76 Driveline Stub Shaft Pull Type 540 RPM ( C) Eurocardan...78 E Equal Angle Pull Type Driveline...20 G Gearbox ( C) Comer...80 Gearbox ( C) Comer...82 Gearbox, T-Box 540 RPM ( C) Comer...84 Guarding Chain...28 Guarding Chain...30 Guarding Rubber...32 Guarding Rubber...34 H Hydraulic Cylinder ( C) Midway...86 Hydraulic Cylinder ( C) Red Lion...88 Hydraulic Lift...22 L Label Placement S/N Label Placement S/N /14/17 RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 3

4 Table of Contents Part Number Index 4 RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 07/14/17

5 Table of Contents Part Number Index 07/14/17 RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 5

6 3-Point Wheel Table of Contents Part Number Index Section 2: Frame Applies to RCR2510, RCR2596, RCRM RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 07/14/17

7 Section 2: Frame 3-Point Wheel Table of Contents Part Number Index Applies to RCR2510, RCR2596, RCRM2510 Ref. Part No. Part Description Comments Revision Dwg D D D H H H C C C C C C C C C C C C C C C C C C C C C C C C C C Drawing Image Number TAILWHEEL ARM ADJUST PLATE TAILWHEEL BEAM ADJ. BRKT. TAILWHEEL BEAM MOUNTING BRKT. TAILWHEEL BEAM WLDMT SHORT WLDMT TAILWHEEL BEAM TAILWHEEL BEAM WELDMENT GREASE ZERK STRAIGHT 1/4-28 GREASE ZERK 1/4-28 THD FORMING RHSNB 1/2-13X1 1/2 GR5 HUB STUD 1/2-20X1 5/8 GR5 HHCS 5/8-11X3 1/2 GR5 HHCS 3/4-10X7 1/2 GR5 HHCS 1/2-20X1 1/4 GR5 NUT LOCK 3/4-10 PLT NUT HEX WHIZ 1/2-13 PLT NUT HEX TOP LOCK 5/8-11 PLT NUT HEX 1 1/4-7(MACHINED)PLAIN NUT HEX FLG/LK 1/2-20 PLT GR G WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1/2 SAE PLT WASHER MACH 25 X 50 X 14GA PIN ROLL 3/8 X 2 1/2 PLT TIRE & WHEEL LAMINATED 0 X 8 LAM 4X8 TR-WL-HUB-YOKE 25 SER. HUB & SPINDLE ASSY 4 BOLT HUB 4 BLT W/CUPS, ZERK & STUDS HUB 4BLT DUCTILE(USE C) OIL SEAL DBL LIP 441 BORE BRG 25ID CONE BRG CUP 44OD BUSHING TW 25ODX.78IDX5 1/4 RC25 TAILWHEEL YOKE, 5 SHAFT RCR2596 RCR(M)2510 RCR2596 S/N RCR2596 S/N RCR(M) /14/17 RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 7

8 Table of Contents CV Trail Type Driveline Applies to RCR2510, RCRM2510 Part Number Index Section 2: Frame RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 07/14/17

9 Table of Contents CV Trail Type Driveline Section 2: Frame Applies to RCR2510, RCRM2510 Part Number Index Ref. Part No. Part Description Comments Revision Dwg D C C C C C C C C C C Drawing Image Number PILLOW BLOCK BRG. SUPPORT GREASE ZERK 1/4-28 X 90-DEG SCREW SET 5/16-18 SKT KP X 3/8 HHCS 1/2-13X1 1/4 GR5 HHCS 1/2-13X1 3/4 GR5 NUT HEX WHIZ 1/2-13 PLT BEARING PILLOW BLOCK 1 3/8BORE PTO CV 2400 X RPM PTO CV 2400 X RPM PTO W/STUB SHAFT/SC /4 PTO W/STUB SHAFT/SC /4 RCR2510 RCRM2510 RCR2510 RCRM /14/17 RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 9

10 Table of Contents Deck Blade Drive S/N Applies to RCR2510, RCR2596, RCRM2510 Part Number Index Section 2: Frame RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 07/14/17

11 Table of Contents Deck Blade Drive S/N Section 2: Frame Applies to RCR2510, RCR2596, RCRM2510 Part Number Index Ref. Part No. Part Description Comments Revision Dwg H H H N/A N/A D D C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C D D D D C C A Drawing Image Number SHIELD BRACKET WELDMENT DISHPAN WELDMENT 15" CTR DISHPAN WELDMENT 17" CTR CW BLADE CARRIER ASSY CCW BLADE CARRIER ASSY2 OUTER SHIELD OUTER SHIELD HHCS 1/2-13X1 1/4 GR5 HHCS 3/4-10X2 1/4 GR5 HHCS 3/4-10X2 GR5 BLADE BOL 1 1/8-12X3 7/16 W/KY HHCS M8X25X20 GR8.8 NUT HEX TOP LOCK 1 1/8-12 PLT. NUT HEX FLG TOP LK 3/4-10 PLT WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1" HARDENED WASHER SPRING LOCK M8 PLT WASHER FLAT M8 PLT GRBOX SHAFT(1 3/4OD) PROTECTOR KNOB 3/8-16 FEMALE THD 2 3/8OD CUTTER BLADE 1/2X4X20.5 CCW CUTTER BLADE 1/2X4X20 1/2 CCW CUTTER BLADE 1/2X4X20.5 LL CCW CUTTER BLADE 1/2 X 4 X 25 CCW CUTTER BLADE 1/2X4X25 LL CCW CUTTER BLADE 1/2X4X20.5 CW CUTTER BLADE 1/2X4X20 1/2 CW CUTTER BLADE 1/2X4X20.5 LL CW CUTTER BLADE 1/2 X 4 X 25 CW CUTTER BLADE 1/2X4X25 LL CW PTO STD.W/4-PLATE SC CAT4 540 PTO STD.W/4-PLATE SC CAT4 540 PTO STD.W/2-PLATE SC CAT T-BOX :35 T-BOX :1 GBOX 1:50 STD SPL. FLEX CPLR TO 38-6 S FLEX CPLR TO 38-6 BLADE SPACER 16 GA.06 thick BLADE SPACER 18 GA.05 thick BLADE SPACER 20 GA..04 thick BLADE SPACER 24GA.03 thick GREASE ZERK STRAIGHT 1/4-28 COMER VENT # BLADE BOLT KIT RCR2596 RCR(M)2510 RCR2596 RCR2510 (S/N ) (S/N ) RCR2596 Standard S/N RCR2596 Standard S/N RCR2596 Optional RCR2510 RCRM2510 Standard RCR2510 RCRM2510 Optional RCR2596 Standard S/N RCR2596 Standard S/N RCR2596 Optional RCR2510 RCRM2510 Standard RCR2510 RCRM2510 Optional RCR2596 RCR2510 RCRM2510 RCR2596 RCR2510 RCRM2510 RCR2596 RCR2510 RCRM2510 As Required As Required As Required As Required 07/14/17 RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 11

12 Deck Blade Drive S/N to Section 2: Frame Applies to RCR2510, RCR2596, RCRM RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 07/14/17

13 Deck Blade Drive S/N to Section 2: Frame Applies to RCR2510, RCR2596, RCRM2510 Ref. Part No. Part Description Comments Revision Dwg D D D D H H H N/A N/A D D C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C A Drawing Image Number BLADE SPACER 16 GA.06 THICK BLADE SPACER 18 GA.05 THICK BLADE SPACER 20 GA.04 THICK BLADE SPACER 24 GA.03 THICK SHIELD BRACKET WELDMENT DISHPAN WELDMENT 15 CTR DISHPAN WELDMENT 17" CTR CW BLADE CARRIER ASSY CCW BLADE CARRIER ASSY OUTER SHIELD OUTER SHIELD HHCS 1/2-13X1 1/4 GR5 HHCS 3/4-10X2 1/4 GR5 BLADE BOL 1 1/8-12X3 7/16 W/KY HHCS M8X25X20 GR8.8 NUT HEX TOP LOCK 1 1/8-12 PLT. NUT HEX FLG TOP LK 3/4-10 PLT WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1" HARDENED WASHER SPRING LOCK M8 PLT WASHER FLAT M8 PLT RUBBER PLUG 1 3/8 W/CROSS SLIT GRBOX SHAFT(1 3/4OD) PROTECTOR KNOB 3/8-16 FEMALE THD 2 3/8OD CUTTER BLADE 1/2X4X20.5 CCW CUTTER BLADE 1/2X4X20 1/2 CCW CUTTER BLADE 1/2X4X20.5 LL CCW CUTTER BLADE 1/2 X 4 X 25 CCW CUTTER BLADE 1/2X4X25 LL CCW CUTTER BLADE 1/2X4X20.5 CW CUTTER BLADE 1/2X4X20 1/2 CW CUTTER BLADE 1/2X4X20.5 LL CW CUTTER BLADE 1/2 X 4 X 25 CW CUTTER BLADE 1/2X4X25 LL CW PTO STD.W/4-PLATE SC CAT4 540 PTO STD.W/4-PLATE SC CAT4 540 PTO STD.W/2-PLATE SC CAT T-BOX :35 T-BOX :1 GBOX 1:50 STD SPL. COMER VENT # COMER VENT CPLR, 75-20X38-6X10.31 FLE CPLR, 75-20X38-6X16.56 FLE BLADE BOLT KIT As Required S/N As Required S/N As Required S/N As Required S/N RCR2596 RCR(M)2510 RCR2596 RCR(M)2510 RCR2596 Standard S/N RCR2596 Standard S/N RCR2596 Optional RCR2510 RCRM2510 Standard RCR2510 RCRM2510 Optional RCR2596 Standard S/N RCR2596 Standard S/N RCR2596 Optional RCR2510 RCRM2510 Standard RCR2510 RCRM2510 Optional RCR2596 RCR2510 RCRM2510 RCR2596 RCR2510 RCRM2510 RCR2596 RCR(M) /14/17 RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 13

14 Table of Contents Deck Blade Drive S/N Applies to RCR2510, RCR2596, RCRM2510 Part Number Index Section 2: Frame RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 07/14/17

15 Table of Contents Deck Blade Drive S/N Section 2: Frame Applies to RCR2510, RCR2596, RCRM2510 Part Number Index Ref. Part No. Part Description Comments Revision Dwg D D D D H H H N/A N/A D D C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C A Drawing Image Number BLADE SPACER 16 GA.06 THICK BLADE SPACER 18 GA.05 THICK BLADE SPACER 20 GA.04 THICK BLADE SPACER 24 GA.03 THICK SHIELD BRACKET WELDMENT 24RND DSHPN WMT 15C/C (8 OS) 27RND DSHPN WMT 17C/C (8 OS) CW BLADE CARRIER ASSY CCW BLADE CARRIER ASSY OUTER SHIELD RCR2596 OUTER SHIELD RCR2510 HHCS 1/2-13X1 1/4 GR5 HHCS 3/4-10X2 1/4 GR5 BLD BLT 1 1/8-12X44 W/.25KEY HHCS M8X25X20 GR8.8 NUT HEX TOP LOCK 1 1/8-12 PLT NUT HEX FLG TOP LK 3/4-10 PLT WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1" HARDENED WASHER SPRING LOCK M8 PLT WASHER FLAT M8 PLT GRBOX SHAFT(1 3/4OD) PROTECTOR KNOB 3/8-16 FEMALE THD 2 3/8OD CUTTER BLADE 1/2X4X20.5 CW CUTTER BLADE 1/2X4X20 1/2 CW CUTTER BLADE 1/2X4X20.5 LL CW CUTTER BLADE 1/2 X 4 X 25 CW CUTTER BLADE 1/2X4X25 LL CW CUTTER BLADE 1/2X4X20.5 CCW CUTTER BLADE 1/2X4X20 1/2 CCW CUTTER BLADE 1/2X4X20.5 LL CCW CUTTER BLADE 1/2 X 4 X 25 CCW CUTTER BLADE 1/2X4X25 LL CCW DRVLN C QD CLTCH DRVLN C QD CLTCH DRVLN C QD CLTCH T-BOX :35 T-BOX :1 GBOX 1:50 STD SPL. COMER VENT # COMER VENT /8MNPT DRVLN 10F 38-6 FLXCPLR DRVLN 17F 38-6 FLXCPLR LARGE SHAFT CONE W ACCESS DOOR BLADE BOLT KIT As Required S/N As Required S/N As Required S/N As Required S/N RCR2596 RCR(M)2510 RCR2596 RCR(M)2510 RCR2596 Standard S/N RCR2596 Standard S/N RCR2596 Optional RCR2510 RCRM2510 Standard RCR2510 RCRM2510 Optional RCR2596 Standard S/N RCR2596 Standard S/N RCR2596 Optional RCR2510 RCRM2510 Standard RCR2510 RCRM2510 Optional RCR2596 RCR2510 RCRM2510 RCR2596 RCR2510 RCRM2510 RCR2596 RCR(M) /14/17 RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 15

16 Table of Contents Deck Components & 3-Point Hitch Applies to RCR2510, RCR2596, RCRM2510 Part Number Index Section 2: Frame RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 07/14/17

17 Table of Contents Deck Components & 3-Point Hitch Section 2: Frame Applies to RCR2510, RCR2596, RCRM2510 Part Number Index Ref. Part No. Part Description Comments Revision Dwg S D D D H H H H H H H H D D D D D D D D D D D D C C C C C C C C C C C C C C C C C C C C C C C C C C Drawing Image Number PIN 1 1/8 OD X 7 1/8 USABLE CAT III BUSHING TUBE RD 2 1/4ODX1 5/32IDX2 5/8 SKID SHOE RCR2596 DECK WELDMENT RCR2596 DECK WELDMENT GREEN RCR2596 DECK WELDMENT ORANGE RCR2596 DECK WELDMENT RED RCR2510 DECK WELDMENT RCR2510 DECK WELDMENT GREEN RCR2510 DECK WELDMENT ORANGE RCR2510 DECK WELDMENT RED ACCESS COVER PLATE REAR BRACE STRAIGHT SHORT BUSHING 1 1/4ODX1 1/32IDX2LG REAR BRACE SHORT REAR BRACE STRAIGHT LONG REAR BRACE STRAIGHT LONG A-FRAME RH. A-FRAME HITCH RH. A-FRAME LH. A-FRAME HITCH LH. REAR BRACE FORMED REAR BRACE FORMED HHCS 1/4-20X1 GR5 HHCS 3/4-10X2 GR5 HHCS 1-8X4 1/2 GR5 HHCS 1-8X4 GR5 HHCS 1-8X3 1/2 GR5 HHCS 1-8X3 GR5 HHCS 3/4-10X1 3/4 GR5 PLOW 3/8-16X1 GR5 NUT LOCK 3/4-10 PLT NUT HEX TOP LOCK 1-8 PLT NUT HEX WHIZ 3/8-16 PLT NUT WING 3/8-16 PLT NUT HEX NYLOCK 1/4-20 WASHER FLAT 1/4 SAE PLT WASHER FLAT 3/8 SAE PLT WASHER LOCK SPRING 3/8 PLT WASHER FLAT 3/4 SAE PLT WASHER FLAT 1 SAE PIN ROLL 1/4X1 3/4 PIN COTTER 3/16 X 2 PIN, HAIR COTTER 3/16 WIRE DIA PIN CLEVIS 1 X 3 3/16 LG PIN LINCH 7/16 X 1 3/4 PIN CLEVIS 1 X 2 PLT PIN 1 1/8 OD X 7 1/8 USABLE PIN, HITCH 3PT CAT 1&2 RCR2596 RCR2510 RCRM2510 RCR2596 S/N RCR2510 S/N RCR2596 RCR(M)3596 RCR2510 RCR(M)2510 RCR2596 RCR2510 RCRM2596 RCR2596 RCR2510 RCRM2596 RCR2596 RCR2510 RCRM2596 (S/N RCR2596) (S/N RCR(M)2510) S/N S/N RCR2596 S/N RCR2510 S/N (S/N RCR2596) (S/N RCR(M)2510) (S/N RCR2596) (S/N RCR(M)2510) RCR2596 S/N RCR2510 S/N RCR2596 S/N RCR2510 S/N S/N RCR2596 S/N S/N /14/17 RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 17

18 Deck Components & 3-Point Hitch (continued) Section 2: Frame Applies to RCR2510, RCR2596, RCRM2510 Ref Part No C C C D C S C C C C C C C Part Description PIN HITCH CAT.I-II MANUAL STORAGE CONTAINER PLUG LP 3" ID RUBBER SPCR TUBE 44ODX.93IDX50LG BUSHING 1 OD X 3/4 ID X 5/8 LG DRIVELINE HOLDER W/ HARDWARE HHCS 5/16-18X1 1/4 GR5 HHCS 5/16-18X2 1/4 GR5 NUT HEX LOCK 5/16-18 FLG. WASHER FLAT 5/16 SAE PLT SPRING TORSION DRIVELINE HLDER DRIVELINE HOOK MOUNT DRIVELINE HOOK Comments S/N (S/N RCR2596) (S/N RCR(M)2510) RCR2596 S/N RCR2510 S/N S/N to S/N S/N S/N S/N S/N S/N S/N S/N Revision 18 RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 07/14/17

19 Deck Components & 3-Point Hitch (continued) Section 2: Frame Applies to RCR2510, RCR2596, RCRM2510 This Page Intentionally Left Blank 07/14/17 RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 19

20 Table of Contents Equal Angle Pull Type Driveline Applies to RCR2510, RCR2596, RCRM2510 Part Number Index Section 2: Frame RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 07/14/17

21 Table of Contents Equal Angle Pull Type Driveline Section 2: Frame Applies to RCR2510, RCR2596, RCRM2510 Part Number Index Ref. Part No. Part Description Comments Revision Dwg S D D D D C C C C C C C C C C C C C Drawing Image Number BEARING FLANGE ASSY. PIPE 1/2 SCH. 40 X 4 15/16 BEARING SUPPORT BEARING FLANGE TUBE 1 OD X 11/16 LG. X 5/32w SNAP RING INT 835 HHCS 5/8-11X7 1/2 GR5 HHCS 1/2-13X7 GR5 NUT LOCK 1/2-13 PLT NUT HEX 5/8-11 PLT WASHER FLAT 5/8 SAE PLT WASHER LOCK SPRING 5/8 PLT BRG 1 3/8 B X 72MM OD W/COLLAR PTO CAT. 4 X 20.5 FIXED 540 PTO CAT. 4 X 22 FIXED 1000 PTO CAT. 4 JACK SHAFT 540 PTO J/S.W/4-PLATE SC CAT4 540 PTO CAT. 4 JACK SHAFT 1000 RCR2596 RCR2510 RCRM2510 RCR2510 RCR2596 RCRM /14/17 RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 21

22 Hydraulic Lift Table of Contents Part Number Index Section 2: Frame Applies to RCR2510, RCR2596, RCRM RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 07/14/17

23 Section 2: Frame Hydraulic Lift Table of Contents Part Number Index Applies to RCR2510, RCR2596, RCRM2510 Ref. Part No. Part Description Comments Revision Dwg A D C C C C C C C C C C C C C C Drawing Image Number HYDRAULIC LIFT COMPLETE HOSE HOLDER BRACKET VENT PLUG - 9/16-18 PLATED HHCS 3/8-16X1 1/2 GR5 HHCS 3/4-10X1 1/2 GR5 NUT LOCK 3/8-16 PLT NUT TOP LOCK 3/4-10 PLT WASHER FLAT 3/8 SAE PLT PIN CLEVIS 1 X 2 3/4 USABLE LG PIN, HAIR COTTER 3/16 WIRE DIA SPRING HOSE LOOP CYL 5X8X12 ROD (TIE)1 PIN STRK CNTRL SPCRS 125 TO 50 AD 9/16MORB 9/16MJIC CP 3/4FORB MALE QD POPPET TYPE HH3/8R /4MORB 9/16FJIC 07/14/17 RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 23

24 Pull Type Table of Contents Part Number Index Section 2: Frame Applies to RCR2510, RCR2596, RCRM RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 07/14/17

25 Section 2: Frame Pull Type Table of Contents Part Number Index Applies to RCR2510, RCR2596, RCRM2510 Ref. Part No. Part Description Comments Revision Dwg S H H H H H L L D H C C C C C C C C C C C C C C C C C C C C C Drawing Image Number PIN 1 1/8 OD X 7 1/8 USABLE CLEVIS WELDMENT LONG LEVEL ROD WLDMT WLDMT LEVEL ROD LONG WLDMT TONGUE LONG TONGUE WELDMENT ASSY. LEVEL ROD ASSY. LEVEL ROD TUBE 1 5/8 OD X 7/32 WL X1 LG. WLDMT. LEVEL ROD SHORT HHCS 1-8X6 1/2 GR5 HHCS 1-8X4 1/2 GR5 HHCS 1-8X2 GR5 NUT HEX JAM 7/8-9 NUT HEX TOP LOCK 1-8 PLT NUT HEX COUPLER 7/8-9 x 5 WASHER FLAT 3/4 SAE PLT WASHER FLAT 1 USS PLT WASHER FLAT 1 SAE PIN LYNCH 5/16 X 1 3/4 PIN ROLL 1/4X1 3/4 PIN COTTER 5/32 X 1 1/4 LG PIN CLEVIS 3/4 X 1 1/2 PIN, HAIR COTTER 3/16 WIRE DIA PIN 1 1/8 OD X 7 1/8 USABLE PIN, HITCH 3PT CAT 1&2 PIN HITCH CAT.I-II PIN LINCH 7/16 X 1 3/4 AG SAFETY CHAIN 6400 LB SAFETY CHAIN LB SCREW JACK 2000# TOP-WND RCR2510 RCRM2510 RCR2510 RCRM2510 RCR2596 RCR2510 RCRM2510 RCR2596 RCR2510 RCRM2510 RCR2596 RCR2596 RCR2510 RCRM2510 RCR2510 RCRM2510 RCR2510 RCRM2510 RCR2596 S/N RCR2510 RCRM2510 RCR2596 S/N RCR2596 S/N RCR2596 S/N S/N S/N /14/17 RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 25

26 Table of Contents Pull Type Axle and Tires Applies to RCR2510, RCR2596, RCRM2510 Part Number Index Section 2: Frame RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 07/14/17

27 Table of Contents Pull Type Axle and Tires Section 2: Frame Applies to RCR2510, RCR2596, RCRM2510 Part Number Index Ref. Part No. Part Description Comments Revision Dwg D H H H L L D D H H H H C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C A C Drawing Image Number HUB GREASE CAP SPRING SHOCK WLDMT LONG LEVEL ROD WLDMT WLDMT LEVEL ROD LONG ASSY. LEVEL ROD ASSY. LEVEL ROD TUBE 1 OD X 12 GA X 15/16 LG. SPRING SHOCK SUPPORT AXLE WELDMENT RPBY A AXLE WELDMENT WLDMT. LEVEL ROD SHORT GREASE ZERK STRAIGHT 1/4-28 HHCS 3/4-10X2 1/4 GR5 HHCS 1/2-13X3 1/4 GR5 BOLT WHEEL 1/2-20X1 90-DEG HHCS 1/2-20X1 1/4 GR5 HHCS 3/4-10X6 1/2 GR5 HHCS 1-8X3 GR5 NUT LOCK 1/2-13 PLT NUT LOCK 3/4-10 PLT NUT HEX SLOTTED 7/8-14 PLT NUT HEX JAM 7/8-9 NUT HEX TOP LOCK 1-8 PLT NUT HEX COUPLER 7/8-9 x 5 WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1/2 SAE PLT WASHER FLAT 3/4 USS PLT WASHER FLAT 1 SAE WASHER SPINDLE - 7/8 PIN COTTER 3/16 X 1 1/4 PLT PIN COTTER 5/32 X 1 1/4 LG PIN CLEVIS 3/4 X 1 1/2 PIN, HAIR COTTER 3/16 WIRE DIA PIN CLEVIS 1 X 3 3/16 LG PIN COTTER 3/16 X 1 1/2 PLT PIN CLEVIS 1 X 2 1/4 GR5 PLT SPRING COMP 88OD x.362w TIRE & WHEEL LAM. 6X9X21(TALL) WHEEL 15 X 5 X 4 BOLT AC TIRE 24 X 7.7 2PC AC TIRE 24X7.7 RECAP PLY TIRE 24X ( C) RIM 2PC.4BLT 10X6 BLK( C TUBE FOR 24X ( C) HUB 4 BOLT WHL W/CUPS & ZERK SPINDLE - SINGLE AXLE BOLT ON HUB 4 BLT W/CUPS, ZERK & STUDS SEAL 1 3/8 ID X 441 OD X.313 BRG 25ID CONE BRG CUP 44OD HHCS 1/2-20X1 1/4 GR5 NUT HEX FLG/LK 1/2-20 PLT.GR.G RATCHET JACK - HEAVY DUT RCR(M)3510 AXLE UPDATE KIT HUB 4 BOLT COMPLETE RCR(M)2510 RCR2596 RCR(M)2510 RCR2596 S/N RCR(M)2510 S/N RCR(M)2510 RCR2596 (Weld in Spindle) S/N RCR(M)2510 S/N RCR(M)2510 S/N + S/N - S/N RCR(M)2510 For S/N RCR(M)2510 W/ Bolt in Spindle 07/14/17 RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 27

28 Guarding Chain Table of Contents Part Number Index Section 3: Guards Applies to RCR RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 07/14/17

29 Section 3: Guards Guarding Chain Table of Contents Part Number Index Applies to RCR2596 Ref. Part No. Part Description Comments Revision Dwg A A K K D D D D D D C C C C C Drawing Image Number 96" REAR CHAIN COMPLETE 96" FRONT CHAIN COMPLETE FRONT CHAIN GUARD ASSY. RH FRONT CHAIN GUARD ASSY. LH REAR CHAINGUARD BRACKET RPBY D ROUND ROD.25 X 59 ROD 1/4 X FRONT CHAIN GUARD RH 96 FRONT CHAIN GUARD LH RHSNB 1/2-13X1 GR5 RHSNB 1/2-13X1 1/4 GR5 NUT HEX WHIZ 1/2-13 PLT CHAIN WELD 5/16 PROOF X 5 LINK CHAIN WELD 5/16 PROOF X 4 LINK 07/14/17 RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 29

30 Guarding Chain Table of Contents Part Number Index Section 3: Guards Applies to RCR2510, RCRM RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 07/14/17

31 Section 3: Guards Guarding Chain Table of Contents Part Number Index Applies to RCR2510, RCRM2510 Ref. Part No. Part Description Comments Revision Dwg A A K K K D D D D D D C C C C Drawing Image Number 3510 REAR CHAIN COMPLETE 2510 FRONT CHAIN COMPLETE ASSY. FRONT OUTER LH. CHNGRD. ASSY. FRONT OUTER RH. CHNGRD. ASSY. FRONT CENTER CHAINGUARD FRT. CHAINGUARD BRACKET CTR. ROD 1/4 X 63 REAR CHAINGUARD BRACKET FRONT CHAINGUARD BRACKET RH FRONT CHAINGUARD BRACKET LH ROUND ROD 1/4 X 32 RHSNB 1/2-13X1 GR5 NUT HEX WHIZ 1/2-13 PLT CHAIN WELD 5/16 PROOF X 5 LINK CHAIN WELD 5/16 PROOF X 4 LINK 07/14/17 RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 31

32 Guarding Rubber Table of Contents Part Number Index Section 3: Guards Applies to RCR RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 07/14/17

33 Table of Contents Guarding Rubber Section 3: Guards Applies to RCR2596 Part Number Index Ref. Part No. Part Description Comments Revision Dwg A A K D D D C C C C C C C Drawing Image Number 96" REAR RUBBER COMPLETE 96" FRONT RUBBER COMPLETE FRONT RUBBER DEFLECTOR ASSY. DEFLECTOR STRAP FRONT DEFLECTOR BRACKET DEFLECTOR STRAP RHSNB 1/2-13X1 1/2 GR5 RHSNB 3/8-16X1 1/4 GR5 RHSNB 1/2-13X1 1/4 GR5 NUT HEX WHIZ 1/2-13 PLT NUT HEX WHIZ 3/8-16 PLT REAR RUBBER DEFLECTOR FRONT RUBBER DEFLECTOR Left Hand or Right Hand 07/14/17 RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 33

34 Guarding Rubber Table of Contents Part Number Index Section 3: Guards Applies to RCR2510, RCRM RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 07/14/17

35 Table of Contents Guarding Rubber Section 3: Guards Applies to RCR2510, RCRM2510 Part Number Index Ref. Part No. Part Description Comments Revision Dwg A A K K K D D D D D D C C C C C C C C Drawing Image Number 3510 REAR RUBBER COMPLETE 2510 FRONT RUBBER COMPLETE ASSY. FRT. OUTER RH DEFLECTOR ASSY. FRT. OUTER LH DEFLECTOR ASSY. FRONT CENTER DEFLECTOR FRT. DEFLECTOR BRACKET CTR. FRT.CTR.DEFLECTOR STRAP REAR DEFLECTOR STRAP FRONT DEFLECTOR BRACKET LH FRONT DEFLECTOR BRACKET RH DEFLECTOR STRAP RHSNB 1/2-13X1 1/2 GR5 RHSNB 3/8-16X1 1/4 GR5 RHSNB 1/2-13X1 1/4 GR5 NUT HEX WHIZ 1/2-13 PLT NUT HEX WHIZ 3/8-16 PLT FRT. CTR. RUBBER DEFLECTOR REAR RUBBER DEFLECTOR FRT OUTER RUBBER DEFLECTOR Includes 1 Ea #3,4 & 5 07/14/17 RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 35

36 Coupler Intermediate c & c Section 4: Drivelines Applies to RCR2510, RCR2596, RCRM RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 07/14/17

37 Coupler Intermediate c & c Section 4: Drivelines Applies to RCR2510, RCR2596, RCRM2510 Ref. Part No. Part Description Comments Revision Dwg C C C C C C Drawing Image Number CPLR, 75-20X38-6X10.31 FLE CPLR, 75-20X38-6X16.56 FLE * WASHER, FLEX COUPLER SHAPED ZERK, M8X1 GREASE BUSHING, 16MM ID COUPLER WLDMNT, DOUBLE FLEX YOKE WLDMNT, DOUBLE FLEX YOKE DISK, FLEX COUPLER RUBBER RPBY YOKE, FLEX CONNECTOR YOKE, FLEX CONNECTOR HHCS 3/8-16X1 1/4 GR5 HHCS M16X0X65 GR8.8 NUT HEX JAM 3/8-16 PLT NUT HEX NYLOCK M16X00 GRB PT RCR2596 RCR(M)2510 For C RCR2596 For C RCR2510 S/N + S/N - 07/14/17 RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 37

38 Driveline 1000 RPM ( C) Eurocardan Section 4: Drivelines Applies to RCRM RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 07/14/17

39 Driveline 1000 RPM ( C) Eurocardan Section 4: Drivelines Applies to RCRM2510 Ref. Part No. Part Description Comments Revision dwg C C C C Drawing Image Number PTO STD.W/2-PLATE SC CAT EC TUBE BEARING (INNER TUBE) EC STIFFENING RING EC SHORT CONE EC STOP RING EC SAFETY SLEEVE EC INNER TUBE SHEILD EC OUTER TUBE SHEILD EC STANDARD CONE EC TUBE BEARING (OUTER TUBE) EC CLUTCH FD2/6 1 3/4" Z20 RPBY EC CROSS ASSEMBLY EC INNER TUBE YOKE EC INNER TUBE 770MM EC 10X70 ROLL PIN EC OUTER TUBE 770MM EC 10X80-DIN-1481 O/TUBE R/PIN EC OUTER TUBE YOKE EC YOKE ASSEMBLY (TRACT. END) DECAL DANGER GUARD MISS PTO DECAL DANGER PTO DRIVELINE DRIVELINE SHIELD SAFETY CHAIN EC GREASE ZERK 8X1 45 DEG. EC TWIST COLLAR KIT (TRT. END) EC GREASE ZERK M6X1 STRAIGHT EC YOKE ASSEMBLY (TRACTOR END) EC PULL COLLAR KIT SHIELD KIT, C & C S/N /14/17 RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 39

40 Driveline 1000 RPM ( C) Eurocardan Section 4: Drivelines Applies to RCRM RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 07/14/17

41 Driveline 1000 RPM ( C) Eurocardan Section 4: Drivelines Applies to RCRM2510 Ref. Part No. Part Description Comments Revision dwg C N N C C C Drawing Image Number PTO CAT. 4 JACK SHAFT 1000 EC TUBE BEARING (INNER TUBE) EC STIFFENING RING EC SHORT CONE EC STOP RING EC SAFETY SLEEVE EC INNER TUBE SHIELD EC INNER TUBE ( ) 790MM DRIVELINE SHIELD SAFETY CHAIN EC OUTER TUBE SHIELD EC OUTER TUBE ( ) 790MM EC EXTRA SHORT CONE (FOR MX) EC TUBE BEARING (OUTER TUBE) EC OUTER TUBE ASSEMBLY EC OUTER TUBE ASSY EC 10X70 ROLL PIN EC INNER TUBE ( ) 840MM EC INNER TUBE YOKE EC CROSS ASSEMBLY EC TORQUE LIMITER, (FD 2) RPBY DECAL DANGER PTO DRIVELINE DECAL DANGER GUARD MISS PTO EC GREASE ZERK 8X1 45 DEG. EC GREASE ZERK M6X1 EXTRA SHRT SHIELD KIT, C & C S/N + S/N - S/N S/N + S/N - S/N + S/N - 07/14/17 RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 41

42 Driveline 1000 RPM ( C) Eurocardan Section 4: Drivelines Applies to RCRM RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 07/14/17

43 Driveline 1000 RPM ( C) Eurocardan Section 4: Drivelines Applies to RCRM2510 Ref. Part No. Part Description Comments Revision dwg C D D C C C Drawing Image Number PTO CAT. 4 X 22 FIXED 1000 EC TUBE BEARING (OUTER TUBE) EC STIFFENING RING EC LONG CONE EC STOP RING EC SAFETY SLEEVE EC OUTER TUBE 340MM EC STANDARD CONE EC YOKE ASSY 1 3/8-6(IMP. END) EC CROSS ASSEMBLY EC OUTER TUBE YOKE EC OUTER TUBE EC 10X80-DIN-1481 O/TUBE R/PIN EC YOKE ASSEMBLY (TRACT. END) DECAL DANGER GUARD MISS PTO DECAL DANGER PTO DRIVELINE DRIVELINE SHIELD SAFETY CHAIN EC GREASE ZERK 8X1 45 DEG. EC TWIST COLLAR KIT (TRT. END) EC TWIST COLLAR KIT (IMP. END) SHIELD KIT, C EC YOKE ASSEMBLY EC PULL COLLAR KIT EVOLUTION S/N /14/17 RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 43

44 Driveline 1000 RPM ( C) Eurocardan Section 4: Drivelines Applies to RCRM RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 07/14/17

45 Driveline 1000 RPM ( C) Eurocardan Section 4: Drivelines Applies to RCRM2510 Ref. Part No. Part Description Comments Revision dwg C D S D C C Drawing Image Number PTO W/STUB SHAFT/SC /4 EC TUBE BEARING (OUTER TUBE) EC STIFFENING RING EC SHORT CONE EC STOP RING EC SAFETY SLEEVE DRIVELINE SHIELD SAFETY CHAIN EC OUTER TUBE SHEILD EC EXTRA SHORT CONE (FOR MX) EC OUTER TUBE ASSY (HRDND) EC OUTER TUBE ASSY EC 10X80-DIN-1481 O/TUBE R/PIN EC OUTER TUBE YOKE EC CROSS ASSEMBLY EC CLUTCH FD2/6 1 3/4" Z20 RPBY DECAL DANGER PTO DRIVELINE DECAL DANGER GUARD MISS PTO EC GREASE ZERK 8X1 45 DEG. S/N Rev. 2 Rev. 1 07/14/17 RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 45

46 Driveline 540 RPM ( C) Eurocardan Section 4: Drivelines Applies to RCR2510, RCR RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 07/14/17

47 Driveline 540 RPM ( C) Eurocardan Section 4: Drivelines Applies to RCR2510, RCR2596 Ref. Part No. Part Description Comments Revision Dwg C D D C C C Drawing Image Number PTO CAT. 4 X 20.5 FIXED 540 EC TUBE BEARING (OUTER TUBE) EC STIFFENING RING EC LONG CONE EC STOP RING EC SAFETY SLEEVE EC OUTER TUBE SHIELD EC STANDARD CONE EC CROSS ASSEMBLY EC OUTER TUBE YOKE EC 10X80-DIN-1481 O/TUBE R/PIN EC OUTER TUBE DECAL DANGER GUARD MISS PTO DECAL DANGER PTO DRIVELINE DRIVELINE SHIELD SAFETY CHAIN EC GREASE ZERK 8X1 45 DEG. EC YOKE ASSEMBLY EC PULL COLLAR KIT EVOLUTION SHIELD KIT, C S/N /14/17 RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 47

48 Driveline 540 RPM ( C) Eurocardan Section 4: Drivelines Applies to RCR RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 07/14/17

49 Driveline 540 RPM ( C) Eurocardan Section 4: Drivelines Applies to RCR2510 Ref. Part No. Part Description Comments Revision Dwg C C C C Drawing Image Number PTO STD.W/4-PLATE SC CAT4 540 * EC TUBE BEARING (INNER TUBE) EC STIFFENING RING EC SHORT CONE EC STOP RING EC SAFETY SLEEVE EC INNER TUBE SHEILD EC OUTER TUBE SHEILD EC STANDARD CONE EC TUBE BEARING (OUTER TUBE) EC CLUTCH FD4/6 1 3/4 20 SPL EC CROSS ASSEMBLY EC INNER TUBE YOKE EC INNER TUBE 770MM EC 10X70 ROLL PIN EC OUTER TUBE 770MM EC 10X80-DIN-1481 O/TUBE R/PIN EC OUTER TUBE YOKE EC YOKE ASSEMBLY (TRACT. END) DECAL DANGER GUARD MISS PTO DECAL DANGER PTO DRIVELINE DRIVELINE SHIELD SAFETY CHAIN EC GREASE ZERK 8X1 45 DEG. EC TWIST COLLAR KIT (TRT. END) EC GREASE ZERK M6X1 STRAIGHT EC YOKE ASSEMBLY (TRACTOR END) EC PULL COLLAR KIT SHIELD KIT, C & C S/N /14/17 RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 49

50 Driveline 540 RPM ( C) Eurocardan Section 4: Drivelines Applies to RCR RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 07/14/17

51 Driveline 540 RPM ( C) Eurocardan Section 4: Drivelines Applies to RCR2510 Ref. Part No. Part Description Comments Revision Dwg C N N C C C Drawing Image Number PTO CAT. 4 JACK SHAFT 540 EC TUBE BEARING (INNER TUBE) EC STIFFENING RING EC SHORT CONE EC STOP RING EC SAFETY SLEEVE EC INNER TUBE SHIELD EC INNER TUBE SHEILD DRIVELINE SHIELD SAFETY CHAIN EC OUTER TUBE SHIELD EC OUTER TUBE SHEILD EC EXTRA SHORT CONE (FOR MX) EC TUBE BEARING (OUTER TUBE) EC OUTER TUBE ASSEMBLY EC OUTER TUBE ASSY EC 10X70 ROLL PIN EC INNER TUBE ( ) 840MM EC INNER TUBE YOKE EC CROSS ASSEMBLY EC TORQUE LIMITER, (FD 4) RPBY DECAL DANGER PTO DRIVELINE DECAL DANGER GUARD MISS PTO EC GREASE ZERK 8X1 45 DEG. EC GREASE ZERK M6X1 EXTRA SHRT SHIELD KIT, C & C S/N S/N S/N S/N S/N S/N S/N S/N S/N S/N /14/17 RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 51

52 Driveline 540 RPM ( C) Eurocardan Section 4: Drivelines Applies to RCR2510, RCR RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 07/14/17

53 Driveline 540 RPM ( C) Eurocardan Section 4: Drivelines Applies to RCR2510, RCR2596 Ref. Part No. Part Description Comments Revision Dwg C C C C Drawing Image Number PTO STD.W/4-PLATE SC CAT4 540 EC TUBE BEARING (INNER TUBE) EC STIFFENING RING EC SHORT CONE EC STOP RING EC SAFETY SLEEVE EC INNER TUBE SHEILD EC OUTER TUBE SHEILD EC STANDARD CONE EC TUBE BEARING (OUTER TUBE) EC CLUTCH FD4/6 1 3/4 20 SPL EC CROSS ASSEMBLY EC INNER TUBE YOKE EC INNER TUBE ( ) 620MM EC 10X70 ROLL PIN EC 840MM OUT. STOCK LENGTH TB. EC 10X80-DIN-1481 O/TUBE R/PIN EC OUTER TUBE YOKE YOKE ASSEMBLY PULL TYPE DECAL DANGER GUARD MISS PTO DECAL DANGER PTO DRIVELINE DRIVELINE SHIELD SAFETY CHAIN EC GREASE ZERK 8X1 45 DEG. EC TWIST COLLAR KIT (TRT. END) EC GREASE ZERK M6X1 STRAIGHT EC YOKE ASSEMBLY EC PULL COLLAR KIT SHIELD KIT, C & C S/N Shown 07/14/17 RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 53

54 Driveline 540 RPM ( C) Eurocardan Section 4: Drivelines Applies to RCR RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 07/14/17

55 Driveline 540 RPM ( C) Eurocardan Section 4: Drivelines Applies to RCR2596 Ref. Part No. Part Description Comments Revision Dwg C N N C C C Drawing Image Number PTO J/S.W/4-PLATE SC CAT4 540 EC TUBE BEARING (INNER TUBE) EC STIFFENING RING EC SHORT CONE EC STOP RING EC SAFETY SLEEVE EC INNER TUBE SHIELD RPBY DRIVELINE SHIELD SAFETY CHAIN EC OUTER TUBE SHIELD RPBY EC EXTRA SHORT CONE (FOR MX) EC TUBE BEARING (OUTER TUBE) EC OUTER TUBE ASSEMBLY RPBY N327 EC 10X70 ROLL PIN EC INNER TUBE ( ) 840MM EC INNER TUBE YOKE EC CROSS ASSEMBLY EC TORQUE LIMITER, (FD 4) RPBY DECAL DANGER PTO DRIVELINE DECAL DANGER GUARD MISS PTO EC GREASE ZERK 8X1 45 DEG. EC GREASE ZERK M6X1 EXTRA SHRT SHIELD KIT, C S/N S/N S/N S/N S/N S/N S/N S/N /14/17 RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 55

56 Driveline CV 1000 RPM ( C) Walterscheid Section 4: Drivelines Applies to RCRM RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 07/14/17

57 Driveline CV 1000 RPM ( C) Walterscheid Section 4: Drivelines Applies to RCRM2510 Ref. Part No. Part Description Comments Revision Dwg C C Drawing Image Number PTO CV 2400 X RPM * WS YOKE 1 3/8-21 SPL WS BOLT M12 X 75 COSMO SELF LOCK NUT M12 RPBY WS YOKE 1 3/8-21 ASGE WS GREASE ZERK WS DOUBLE YOKE WS CROSS & BEARING KIT WS INBOARD YOKE WS SPRING PIN 10 X 20 WS PROFILE & SLEEVE WS INNER PROFILE 16 GA WS INBOARD YOKE 1B WALTERSCHEID DNGR DECAL-STEEL WS SHIELD CONE 11 RIB WALTERSCHEID SCREW WS BEARING RING - SC25 WALTERSCHEID SAFETY CHAIN WS INNER SHIELD TUBE-ROUND WALTERSCHEID DANGER DECAL-SHLD WS OUTER SHIELD TUBE OVL WS SHIELD CONE 3 RIB WS CROSS BEARING KIT WS SUPPORT BEARING WS CV CONE & BEARING ASSY WS ZERK WS ASGE COLLAR KIT SHIELD KIT, C WS REINFORCING COLLAR Obsolete S/N /14/17 RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 57

58 Driveline CV Pull Type Cutter 540 RPM ( C) Walterscheid Section 4: Drivelines Applies to RCR RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 07/14/17

59 Driveline CV Pull Type Cutter 540 RPM ( C) Walterscheid Section 4: Drivelines Applies to RCR2510 Ref. Part No. Part Description Comments Revision Dwg C C C Drawing Image Number PTO CV 2400 X RPM * WS YOKE 1 3/8-21 SPL WS BOLT M12 X 75 COSMO SELF LOCK NUT M12 RPBY WS YOKE 1 3/8-6 ASGE WS GREASE ZERK WS DOUBLE YOKE WS CROSS & BEARING KIT WS INBOARD YOKE WS SPRING PIN 10 X 75 WS PROFILE & SLEEVE WS INNER PROFILE 16 GA WS INBOARD YOKE 1B DECAL DANGER GUARD MISS PTO WS SHIELD CONE 11 RIB WALTERSCHEID SCREW WS BEARING RING - SC25 WALTERSCHEID SAFETY CHAIN WS INNER SHIELD TUBE ROUND WALTERSCHEID DANGER DECAL-SHLD WS OUTER SHIELD TUBE OVL. WS SHIELD CONE 3 RIB WS CROSS BEARING KIT WS SUPPORT BEARING WS CV CONE & BEARING ASSY WS ZERK WS QUICK DISCONNECT KIT SHIELD KIT, C WS REINFORCING COLLAR Obsolete S/N /14/17 RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 59

60 Driveline Flex Coupler ( C) Eurocardan Section 4: Drivelines Applies to RCR2510, RCRM RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 07/14/17

61 Driveline Flex Coupler ( C) Eurocardan Section 4: Drivelines Applies to RCR2510, RCRM2510 Ref. Part No. Part Description Comments Revision Dwg C A Drawing Image Number FLEX CPLR TO 38-6 EC CONNECTION HUB EC WSH. BD. 35mm O.D/16.5mm I.D EC RUBBER DISC EC NUT EC FLANGE WELDMENT EC YOKE 1 3/8 Z6 INDUCT. HARD EC BOLT EC BOLT BUSHING EC WASHER 29.8mm O.D/17.2mm I.D CONICAL DOG KIT EC CROSS ASSEMBLY EC GREASE ZERK M6X1 STRAIGHT FLEX COUPLER KIT (ONE DISC) 07/14/17 RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 61

62 Driveline Flex Coupler ( C) Eurocardan Section 4: Drivelines Applies to RCR RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 07/14/17

63 Driveline Flex Coupler ( C) Eurocardan Section 4: Drivelines Applies to RCR2596 Ref. Part No. Part Description Comments Revision Dwg C A Drawing Image Number FLEX CPLR TO 38-6 * EC BOLT EC CONNECTION HUB EC WSH. BD. 35mm O.D/16.5mm I.D EC BOLT BUSHING EC RUBBER DISC EC WASHER 29.8mm O.D/17.2mm I.D EC NUT EC SPIDER TUBE EC GREASE ZERK M8 STRAIGHT FLEX COUPLER KIT (ONE DISC) CONICAL DOG KIT 07/14/17 RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 63

64 Driveline Slip Clutch ( ) Eurocardan Section 4: Drivelines Applies to RCRM RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 07/14/17

65 Driveline Slip Clutch ( ) Eurocardan Section 4: Drivelines Applies to RCRM2510 Ref. Part No. Part Description Comments Revision dwg A Drawing Image Number EC CLUTCH FD2/6 1 3/4 20 SPL RPBY A EC CLUTCH YOKE W/FLANGE EC CLUTCH BUSHING EC CLUTCH LINING RING EC HUB WITH FLANGE EC CONICAL DOG KIT REPLACEMENT EC INNER DISK EC PRESSURE DISK EC COMPLETE BOLT SV KIT, EC SLIP CLUTCH SPRING Contains 8 Springs 07/14/17 RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 65

66 Driveline Slip Clutch ( ) Eurocarda Section 4: Drivelines Applies to RCRM RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 07/14/17

67 Driveline Slip Clutch ( ) Eurocarda Section 4: Drivelines Applies to RCRM2510 Ref. Part No. Part Description Comments Revision dwg A Drawing Image Number EC TORQUE LIMITER, (FD 2) EC CLUTCH YOKE W/FLANGE FD2 HUB 1 3/4 WITH FLANGE REP BY C EC BOLT (M10X85) RPBY A EC PRESSURE DISK EC INNER DISK EC CLUTCH LINING RING EC BOLT EC CLUTCH BUSHING SV KIT, EC SLIP CLUTCH SPRING 07/14/17 RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 67

68 Table of Contents Driveline Slip Clutch ( ) EC Applies to RCRM2510 Part Number Index Section 4: Drivelines RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 07/14/17

69 Table of Contents Driveline Slip Clutch ( ) EC Section 4: Drivelines Applies to RCRM2510 Part Number Index Ref. Part No. Part Description Comments Revision Dwg C Drawing Image Number EC TORQUE LIMITER, (FD 2) * EC CLUTCH YOKE W/FLANGE FD2 HUB 1 3/4 WITH FLANGE NUT HEX M10X5 PLT EC BOLT (M10X85) EC SPRING EC PRESSURE DISK EC INNER DISK EC CLUTCH LINING RING EC BOLT, NUT & WASHER KIT EC CLUTCH BUSHING 07/14/17 RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 69

70 Driveline Slip Clutch ( ) Eurocardan Section 4: Drivelines Applies to RCR2510, RCR RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 07/14/17

71 Driveline Slip Clutch ( ) Eurocardan Section 4: Drivelines Applies to RCR2510, RCR2596 Ref. Part No. Part Description Comments Revision Dwg A Drawing Image Number EC CLUTCH FD4/6 1 3/4 20 SPL * RPBY A EC CLUTCH YOKE W/FLANGE EC CLUTCH BUSHING EC CLUTCH LINING RING EC CLUTCH MIDDLE DISK EC INNER DISK EC HUB WITH FLANGE EC CONICAL DOG KIT REPLACEMENT EC PRESSURE DISK EC BOLT & SCREW NUT KIT REPL. SV KIT, EC SLIP CLUTCH SPRING 1 3/4-20 Contains 8 Springs 07/14/17 RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 71

72 Driveline Slip Clutch ( ) Eurocardan Section 4: Drivelines Applies to RCR2510, RCR RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 07/14/17

73 Driveline Slip Clutch ( ) Eurocardan Section 4: Drivelines Applies to RCR2510, RCR2596 Ref. Part No. Part Description Comments Revision Dwg C A Drawing Image Number EC CLUTCH FD4/6 1 3/4 20 SPL NUT HEX M10X5 PLT RPBY A EC CLUTCH YOKE W/FLANGE EC CLUTCH BUSHING EC CLUTCH LINING RING EC CLUTCH MIDDLE DISK EC INNER DISK EC HUB WITH FLANGE EC BOLT (M14X80) EC SCREW NUT (M14) EC WASHER (d14) EC PRESSURE DISK EC BOLT (M10X100) SV KIT, EC SLIP CLUTCH SPRING Contains 8 Springs 07/14/17 RCR2596, RCR2510 & RCRM2510 Rotary Cutter P 73