21" STEEL DECK EASY LINE EUROPEAN WALK MOWER

Size: px

Start display at page:

Download "21" STEEL DECK EASY LINE EUROPEAN WALK MOWER"

Mercy Summers
5 years ago
Views:

1 Parts Manual for 21" STEEL DECK EASY LINE EUROPEAN WALK MOWER MODEL ESPV21 ESPV211 McDonough, GA, U.S.A. Briggs & Startton Yard Power Products Group Copyright 2007 Briggs & Startton Corporation Milwaukee, WI USA. All Rights Reserved Revision 1, 1/10/2007 Manual No

3 Table Of Contents PAGE GROUP 4 HANDLES & CONTROLS 6 GUARDS AND COVERS 8 FRONT WHEELS 10 REAR WHEELS 12 REAR DECK BRACKETS & IDLER ARM 14 TRANSMISSION 16 ENGINE AND BLADE 18 BAGGING COMPONENTS 20 DECALS 21" STEEL DECK EASY LINE 3 Manual No

4 HANDLES & CONTROLS Manual No " STEEL DECK EASY LINE 4

5 HANDLES & CONTROLS Item Part No Qty Description Note HANDLE, Upper finish: flat black textured PLATE, Control Panel finish: flat black textured SCREW, #8-16 Recessed Pan Head (Torxplus) GUIDE, Rope (1/4-20 threads) NUT, 1/4-20 Hex Nyloc WASHER, 5/16 Internal Tooth Lock KNOB, 5/16-18 Wing (Black) 7 M KNOB, 5/16-18 Wing (Black) Briggs part 8A ASSY, Control Head Variable Speed (Incl. 8, 9, 10, 11, 12, 15 & 16) 8 1 CASE HALF, Bottom not available individually 9 1 SPRING STEEL not available individually 10 1 CLUTCH LEVER, Silver not available individually 11 1 ASS'Y., Speed Lever/Friction Material (Snapper) not available individually; includes , Friction Strip 12 1 CASE HALF, Top, Variable Speed not available individually BAIL, Brake finish: flat black textured * CABLE, Zone Control * CABLE, Clutch * CABLE, Speed HANDLE, Lower finish: flat black textured WIRE TIE, 11 Inch Black Nylon BOLT, 5/16-18 x 2 Curved Head Square Neck, GR BRACKET, Lower Handle, Black Textured BOLT, 5/16-18 x 1-1/2 Round Head Square Neck, GR BOLT, 5/16-18 x 5/8 Round Head Short Square Neck Carriage NUT, 5/16-18 Hex Flange Lock, GR PUSHNUT, 3/ FOAM GRIP, 7 Footnotes: NOTE: * Snapper part numbers are stamped on cables. 21" STEEL DECK EASY LINE 5 Manual No

6 GUARDS AND COVERS Manual No " STEEL DECK EASY LINE 6

7 GUARDS AND COVERS Item Part No Qty Description Note WELDMENT, 21 Deck, 7 Position REAR COVER, Belt/Transmission SCREW, 7 mm x 1 x.55 AB Point Was Rivit PLUG, Hole (Polyethylene) ROD, Trail Shield 1/4-20 thread- both ends SHIELD, Trail NUT, 1/4-20 Hex Flange Lock BOLT, 5/16-18 x 3/4 Short Square Neck Carriage, GR BOLT RETAINER, 5/16- Black COVER, 21 Deck Recycling BOLT, 5/16-18 x 1-1/8 Short Square Neck Carriage, GR SPACER,.316 x.375 x.300/ NUT, 5/16-18 Large Flange Hex Center Lock NUT, 5/16-18 Hex Flange Lock CHUTE, 21 Side Discharge NUT, 5/16-18 Speed Shakeproof# FN ) Footnotes: 21" STEEL DECK EASY LINE 7 Manual No

8 FRONT WHEELS Manual No " STEEL DECK EASY LINE 8

9 FRONT WHEELS Item Part No Qty Description Note AXLE, Front, Low Cost Walk Mower, ASSEMBLY, Front Wheel Arm, L. H ASSEMBLY, Front Wheel Arm, R. H NUT, 5/16-18 Hex Flange Lock WASHER, Shim,.875 x.531 x.060 6A WHEEL, Front, 8, LS Tread, 1-5/8 Hub 6B WHEEL, Front, 8 x 2, Double Bar II Tread, 1-5/8 Hub w/bushing Euro rim GRIP, Height Latch replaces (voided) COTTER, Hairpin HUB CAP, 1-3/8 Dia. black FRONT WHEEL ARM, L.H. (Square Hole) FRONT WHEEL ARM, R.H. (Round Hole) SHOULDER BOLT, 5/ BOLT RETAINER, 5/16- Black HEIGHT LATCH V21 Footnotes: 21" STEEL DECK EASY LINE 9 Manual No

10 REAR WHEELS Manual No " STEEL DECK EASY LINE 10

11 REAR WHEELS Item Part No Qty Description Note 1A ASSY., 9 x 2 Gear Wheel, LS Tread & P. M. Bushing gray rim 1B ASSY., 9 x 2 Gear Wheel, Double Bar II Tread & Nylon Bushing 2A BUSHING, Wheel (powdered metal) part of item 1A 2B BUSHING, Wheel (Nylon) part of item 1B WASHER, 1/2 Flat COTTER, Hairpin HUB CAP, 3-1/4 Diameter black PAWL, 3/16 O.D ASSEMBLY, Axle Bearing incl. items 8 & HOUSING, Axle Bearing BALL BEARING, Axle.50 I.D. x O.D. x.3125 thick BOLT, 1/4-20 x 3/4 Hex Flange Lock ASSEMBLY, Axle Arm, Left Rear ASSEMBLY, Axle Arm, Right Rear GRIP, Height Latch replaces (voided) SNAP RING, 1-3/8 Truarc SHIELD, Dust WASHER,.531 x 1.25 x.063 or (1.50 O.D.) RETAINING RING Waldes RETAINER, Pinion Seal SEAL, Pinion (Felt) PINION, LH Drive PINION, RH Drive O-RING, Buna N, O-RING, Buna N, 124 Footnotes: 21" STEEL DECK EASY LINE 11 Manual No

12 REAR DECK BRACKETS & IDLER ARM Manual No " STEEL DECK EASY LINE 12

13 REAR DECK BRACKETS & IDLER ARM Item Part No Qty Description Note SCREW, 5/16-18 x 2 Hex Head Cap, GR SCREW, 1/4-20 x 2-1/4 Hex Head Cap, GR NUT, 5/16-18 Hex Flange Lock BOLT, 5/16-18 x 5/8 Round Head Short Square Neck Carriage 5A BRACKET, Transmission Mounting 5B BRACKET, Transmission Mounting SPACER, 3/8 x 13/16 x 5/ NUT, 1/4-20 Hex Top Lock Flange NUT, 3/8-16 Hex Flange Lock WASHER, 13/32 x 1-1/2 x 1/8 Flat IDLER ARM, Belt Drive BELT GUIDE, Idler PULLEY, Flat Idler, Plastic replaces BOLT, 3/8-16 X 1-1/2 Hex Flange Lock, GR SPACER, Pivot, Belt Idler SPACER, Idler SHIELD, Debris BOLT, 3/8-16 x 2-1/4 Short Square Neck Carriage, GR 5 Footnotes: 21" STEEL DECK EASY LINE 13 Manual No

14 TRANSMISSION Manual No " STEEL DECK EASY LINE 14

15 TRANSMISSION Item Part No Qty Description Note TRANSMISSION, LC Walk, Variable Speed includes pulley 1 TRANSMISSION, Dog Clutch not a part sales item PULLEY, Transmission NUT, 3/8-16 Hex Center Lock Jam WASHER,.390 I.D BELT GUIDE, Variable Speed (1/4-20 threads) NUT, 1/4-20 Hex Top Lock Flange * BELT, 3L, Traction Drive Nominal O.D SCREW, 7mm x 1 x.550 AB Point SPRING, Return, Clutch Footnotes: NOTE: * Part number is printed on back edge of belt. 21" STEEL DECK EASY LINE 15 Manual No

16 ENGINE AND BLADE Manual No " STEEL DECK EASY LINE 16

17 ENGINE AND BLADE Item Part No Qty Description Note 1 1 * ENGINE, 6.5 B&S Quantum, Euro Model 123K020142E1 1 1 * ENGINE, 6.0 B&S Quantum, Euro Model 12H B SCREW, 3/8-16 x 1 Hex Washer Self-Tap SCREW, 3/8-16 x 2 Hex Washer Self-Tap GUIDE, Belt SPACER, Belt Guide PULLEY, Engine KEY, Hi-Pro (# HP-506) SET SCREW, 5/16-18 x 1/2 Hex Recess Type A Point (Cup Point) HUB, Blade Drive, 25M I.D BLADE, Wave, 21 Steel Deck WASHER, Cone SCREW, 3/8-24 x 2 Hex Head Cap, GR 5 Footnotes: NOTE: * Purchase engine parts from engine manufacturer dealer. 21" STEEL DECK EASY LINE 17 Manual No

18 BAGGING COMPONENTS Manual No " STEEL DECK EASY LINE 18

19 BAGGING COMPONENTS Item Part No Qty Description Note BAG ASSEMBLY (Door) includes items 2 thru CONNECTOR, Bag (weldment) GRASS BAG (Door w/silver letters) ASSEMBLY, Bag Wire (12 ) 21S NUT, 1/4-20 Hex WASHER, 1/4 Internal Tooth Lock COVER, Bag Adapter HINGE, Chute Cover BOLT, 1/4-20 x 5/8 Flat Head Square Neck, GR 5 or (1/4-20 x 1/2 Square Neck Carriage Bolt, Grade 5) STOP, Cover TRIM, Moulding BOLT, 1/4-20 x 3/4 Short Square Neck Carriage, GR ADAPTER, Bag NUT, 5/16-18 Large Flange Hex Center Lock SPACER,.316 x.375 x.300/ BOLT RETAINER, 5/16- Black BOLT, 5/16-18 x 3/4 Short Square Neck Carriage, GR SCREW, 5/16-18 x 5/8 Cross Recess Pan Head NUT, 5/16-18 Speed Shakeproof# FN ) ROD, Rope Pulley (3/8-16 thread) LOCKWASHER, 1/4 Spring NUT, 1/4-20 Hex Jam, GR 5 or B PULLEY, Nylon BUSHING, Flange,.381 x.625 x NUT, 3/8-16 Hex Nyloc Footnotes: 21" STEEL DECK EASY LINE 19 Manual No

20 DECALS Manual No " STEEL DECK EASY LINE 20

21 DECALS Item Part No Qty Description Note DECAL, SNAPPER, Steel Decks DECAL, Control Head, Variable Speed DECAL,Euro Community (CE) DECAL, Warning (Euro) DECAL, Noise, 98 DB DECAL, OPC Bail International Symbol DECAL, Warning (Deck) DECAL, Deck/Chute International Warning DECAL, Spart Plug International Symbol DECAL, 2005 Year of Manufacture not shown DECAL, 2006 Year of Manufacture DECAL, Warning, Euro, Multi-Panel 12 1 DECAL, Patent Numbers not shown; not a service part Footnotes: 21" STEEL DECK EASY LINE 21 Manual No

24 Parts Manual for 21" STEEL DECK EASY LINE EUROPEAN WALK MOWER IT IS THE POLICY OF BRIGGS & STRATTON CORP TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE RESERVE THE RIGHT TO MAKE CHANGES OR ADD IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE SUCH CHANGES ON PRODUCTS McDonough, GA, U.S.A. Briggs & Startton Yard Power Products Group Copyright 2007 Briggs & Startton Corporation Milwaukee, WI USA. All Rights Reserved Revision 1, 1/10/2007 Manual No

Parts Manual for 21" STEEL DECK EASY LINE WALK MOWER SERIES 0 & 1 PUSH MODELS PROPELLED MODELS

Parts Manual for 21 STEEL DECK EASY LINE WALK MOWER SERIES 0 & 1 PUSH MODELS PROPELLED MODELS Parts Manual for 21" STEEL DECK EASY LINE WALK MOWER SERIES 0 & 1 PUSH MODELS PROPELLED MODELS S21 (7800003) SP21 (7800004) S211 (7800089) SP211 (7800090) S211 (7800166) SP211 (7800167) SPV21 (7800005)