ISO RESILIENT WEDGE GATE VALVE. Engineering Creative Solutions for Fluid Systems Since 1901
|
|
- Randall Shaw
- 5 years ago
- Views:
Transcription
1 ISO RESILIENT WEDGE GATE VALVE Engineering Creative Solutions for Fluid Systems Since 1901
2 TABLE OF CONTENTS ISO RESILIENT WEDGE GATE VALVE Scope of Line...1 Features and Benefits...1 Suggested Specification...2 PART DRAWINGS AND DIMENSIONAL DATA C515 Resilient Wedge Gate Valve Metal Seat Solid Wedge Gate Valve: Size 3" - 12"...5 Metal Seat Solid Wedge Gate Valve: Size 14" - 24" EN588-1 Series 3 Resilient Wedge Gate Valve EN588-1 Series 14 Resilient Wedge Gate Valve EN588-1 Series 15 Resilient Wedge Gate Valve
3 SCOPE OF LINE ISO Resilient Wedge Gate Valve MODEL: ISO-DE Flanged Butterfly Valve SIZES: DN100 through DN1800 PRESSURE CLASS: PN10 (10 bar) or PN16 (16 bar) BODY STYLE: Short (ISO-DES) and Long (ISO-DEL) Body face to face, flanged ends drilled in accordance with EN / ISO 5752 / BS EN 1092 BODY AND DISC MATERIAL: Ductile iron ASTM A536 Gr standard, exceeds DIN-GGG-40 and BS-2789 Grade 420 requirements. RUBBER SEAT: Rubber seat mechanically retained in disc by means of a specially engineered ductile seat retaining ring and 304 stainless steel nylon lock screws. ACTUATION OPTIONS: Gear with Handwheel (Standard) Hydraulic Actuation METAL SEAT SOLID WEDGE VALVE Pneumatic Actuation Electric Actuation COATING: Epoxy coating system approved for drinking water applications. Fusion bonded epoxy coating on valves up to DN1200 standard. RANGE OF APPLICATIONS: Water, sea water*, high temperature*, gas*. * Available for these applications upon request. Please contact Pratt or your local sales representative for details. FEATURES: Stainless steel dry shaft completely sealed off by rubber O-Rings on sealing sleeve and by dry pins. Teflon lined filament wound bearings for long service life and lower operating torque. Double eccentric design optimizes the seal of the seat retaining ring allowing the disc to seal tightly while retaining the seat in position against high pressure and flow. Specially engineered seat sealing system adds to longer 1 service life and lower operating torque.
4 SUGGESTED SPECIFICATIONS ISO Resilient Wedge Gate Valve GENERAL Metal Seat Solid Wedge Gate Valves for wastewater and sewage applications should be manufactured in accordance with AWWA C500 standards. Pressure containing components should be ductile iron ASTM A and wedge seating surfaces and body seat rings are be cast from ASTM B62 bronze. Stems should have integral collars and be machined from corrosion resistant grade 304 stainless steel. Body and bonnet fasteners should be of rustproof material having the physical properties of ASTM A307. Wedge valves are to be designed and manufactured with minimal moving parts to prevent clogging or buildup of foreign matter. Valve coatings shall be consistent with AWWA C500 standard. Valve testing and all markings shall conform to AWWA C500 standard. 2
5 C515 RESILIENT WEDGE GATE VALVE Part Drawing ID PART NAME MATERIAL STANDARDS 1 Body ASTM B Bonnet STM B Disc ASTM B / EPDM 4 Stem Nut ASTM B584 C Stem Stainless Steel Type Gasket EPDM, ASTM D Gland Flange ASTM B Wrench Nut ASTM B Thrust Washer ASTM B584 C O-Ring EPDM, ASTM D Stem Bushing ASTM B584 C Wiper Ring EPDM, ASTM D Hex Bolt Stainless Steel Type Plain Washer Stainless Steel Type Lock Washer Stainless Steel Type Hex Nut Stainless Steel Type Socket Head Cap Screw Stainless Steel Type Fender Washer Stainless Steel Type Cap Screw Stainless Steel Type 304 3
6 C515 RESILIENT WEDGE GATE VALVE Dimensional Data B ØF A C G BCD No. ØE VALVE SIZE A B C BCD NO.-ØE ØF G 2" / DN (110) 1.22 (31) 7.00 (178) 4.75 (121) (19) 6.00 (152) 0.63 (16) 2-1/2" / DN (96) 1.50 (38) 7.00 (178) 5.50 (138) (19) 7.00 (178) 0.69 (18) 3" / DN (112) 1.50 (38) 8.00 (203) 6.00 (152) (19) 7.50 (191) 0.75 (19) 4" / DN (133) 1.50 (38) 9.00 (229) 7.50 (191) (19) 9.00 (229) 0.79 (20) 6" / DN (147) 1.50 (38) (267) 9.50 (241) (22) (279) 0.75 (19) 8" / DN (162) 1.50 (38) (292) (298) (23) (343) 0.88 (22) 10" / DN (199) 2.13 (54) (330) (362) (26) (406) 0.94 (24) 12" / DN (226) 2.13 (54) (356) (432) (26) (483) 1.00 (25) VALVE SIZE WT. - LBS (KG) PART NO. 2" / DN (12) 0200-BGV FFNL 2-1/2" / DN (16) 0250-BGV FFNL 3" / DN (21) 0300-BGV FFNL 4" / DN (29) 0400-BGV FFNL 6" / DN (45) 0600-BGV FFNL 8" / DN (75) 0800-BGV FFNL 10" / DN (105) 1000-BGV FFNL 12" / DN (155) 1200-BGV FFNL 4
7 METAL SEAT SOLID WEDGE GATE VALVE: SIZE 3" - 12" Part Drawing & Dimensional Data Available With Optional Handwheel Available With Optional Pull Down Packing DETAIL A SCREWED IN BODY SEAT H2 ØS MATERIAL LIST NO. PARTS MATERIAL ASTM.DESIGN. QTY 351 O-Ring Rubber (Buna N) D 2000 BK Stuffing Box Gasket Rubber (Buna N) D 2000 BK Wiper Ring Rubber (Buna N) D 2000 BK Bonnet Gasket Rubber (Buna N) D 2000 BK Stuffing Box Bolt Zinc Coated Steel A 307 Grade B 1 set 295 Stuffing Box Bolt & Nut Zinc Coated Steel A 307 Grade B 1 set H1 2~Bosses ØD ØC A a Top Nut Zinc Coated Steel A 307 Grade B Bonnet Stud & Nut Zinc Coated Steel A 307 Grade B 1 set 174 Bonnet Bolt & Nut Zinc Coated Steel A 307 Grade B 1 set T L A T 168 Stem Stainless Steel A 276 Type Stem Nut Bronze B " 068 Stuffing Box Bushing Bronze B Bonnet Bushing Bronze B Disc Seat Ring Bronze B Body Seat Ring Bronze B Operating Nut Cast Iron A 126 Class B Stuffing Box Ductile Iron A 536 Gr Disc Ductile Iron A 536 Gr Bonnet Ductile Iron A 536 Gr Body Ductile Iron A 536 Gr A H Approx. SIZE ØD ANSI B 16.1 CLASS 125 L IN. MM. ØD ØC ØH N T a (min) A ØS AT BASE OF THREAD H H1 H2 H /2 6 3/4 4 3/ /2 3/4 8 15/ / /2 7/ /2 13-1/2 11-3/4 7/ / / / / ØD Øh~n H3
8 METAL SEAT SOLID WEDGE GATE VALVE: SIZE 14" - 24" Part Drawing & Dimensional Data ØD ØC T DETAIL FOR DISC GUIDES SECTION A T -A T a 085 ØS A L Shown With Optional Bypass H2 H1 2 Bosses DETAIL A BODY SEAT SCREWED IN 010 2" Indicator 178 H (Approx) A T H3 Bypass Gate Valve A T SIZE ØD ANSI B 16.1 CLASS 125 L IN. MM. ØD ØC Øh N T a (min) A ØS AT BASE OF THREAD /4 1-1/ / /2 21-1/4 1-1/ / /4 1-1/4 16 9/ / / / /2 1-3/ / IN. SIZE ØD MM B A Scraper H H1 H2 H3 L1 ØM N1 GEAR RATIO x8TPI (UNC) : x8TPI (UNC) 14 3: /8 x7tpi (UNC) 14 3: /8 x7tpi (UNC) 18 3: /4 x7tpi (UNC) 18 4: ØM~2 Tapped N Holes ØH ~N1 Drilled BYPASS SIZE MATERIAL LIST NO. PARTS MATERIAL ASTM.DESIGNATION QTY 082 Bonnet Guide Bronze B Body Guide Bronze B Stem Nut Bronze B Gland Bushing Bronze B Packing Box Bushing Bronze DETAIL B62 B Bonnet Bushing Bronze B Disc Seat Ring Bronze B Body Seat Ring Bronze B Gear Operator See Table set 010 Operating Nut Cast Iron A 126 Class B Gland Ductile Iron A 536 Gr Packing Box Ductile Iron A 536 Gr Disc Ductile Iron A 536 Gr Bonnet Ductile Iron A 536 Gr Body Ductile Iron A 536 Gr Packing Box Bolt Stainless Steel A 276 Type set 352 O-Ring C Rubber (Buna N) D 2000 BK O-Ring A Rubber (Buna N) D 2000 BK Packing Braided Packing Synthetic Yarn with PTFE 1 set 329 O-Ring Rubber (Buna N) D 2000 BK Bonnet Gasket Rubber (Buna N) D 2000 BK Disc Guide Bronze B Body Guide Bolt Stainless Steel A 276 Type set 178 Gland Bolt & Nut Stainless Steel A 276 Type Bonnet Bolt & Nut Stainless Steel A 276 Type set 168 Stem Stainless Steel A 276 Type Disc Guide Bolt Stainless Steel A 276 Type Roller Bronze B Roller Box Bronze B62 1 6
9 EN588-1 SERIES 3 RESILIENT WEDGE GATE VALVE Part Drawing ID PART NAME QTY. MATERIAL STANDARD 1 Body 1 EN-GJS DI EN1563: Bonnet 1 EN-GJS DI EN1563: Disc 1 EN-GJS DI / EPDM EN1563: Stem Nut 1 CC331G AL BZ EN1982: Stem SS EN : Gasket 1 EPDM WA, EN681-1: Bonnet Bolt 4 304SS GB / T Stem Cap 1 EN-GJS DI EN1563: Gland Bushing 1 CW617N Brass EN12164: O-Ring 1 EPDM WA, EN 681-1: Cap Screw 1 304SS GB/T Thrust Collar 2 CW617N Brass EN12164: Groove Pin 1 316SS - 14 Wiper Ring 1 EPDM WA, EN681-1: O-Ring 2 EPDM - 16 O-Ring 1 EPDM
10 EN588-1 SERIES 3 RESILIENT WEDGE GATE VALVE Dimensional Data H1 H H2 B DN Dt D F T T N-ØD L BCD DN PN WT. - KG F B H2 H1 H t T N-ØD BCD DT D L TURNS TO CLOSE 50 PN Ø PN Ø PN Ø PN Ø PN Ø PN Ø PN Ø PN Ø PN Ø PN Ø PN Ø PN Ø Standard Clockwise-Close (Open-Left). Anticlockwise-Close available to special order. 8
11 EN588-1 SERIES 14 RESILIENT WEDGE GATE VALVE Part Drawing ID PART NAME QTY. MATERIAL STANDARD 1 Body 1 EN-GJS DI EN1563: Bonnet 1 EN-GJS DI EN1563: Disc 1 EN-GJS DI/EPDM EN1563: Stem Nut 1 CC331G AL BZ EN1982: Stem SS EN : Gasket 1 EPDM WA, EN681-1: Bonnet Bolt 4 304SS GB/T Stem Cap 1 EN-GJS DI EN1563: Gland Bushing 1 CW617N Brass EN12164: O-Ring 1 EPDM WA, EN 681-1: Cap Screw 1 304SS GB/T Thrust Collar 2 CW617N Brass EN12164: Groove Pin 1 316SS - 14 Wiper Ring 1 EPDM WA, EN681-1: O-Ring 2 EPDM - 16 O-Ring 1 EPDM - 9
12 EN588-1 SERIES 14 RESILIENT WEDGE GATE VALVE Dimensional Data H1 H H2 DN Dt D B F L T t BCD N-ØD DN PN WT - KG F B H2 H1 H t T N-ØD BCD Dt D L TURNS TO CLOSE 50 PN Ø PN Ø PN Ø PN Ø PN Ø PN Ø PN Ø PN Ø PN Ø PN Ø PN Ø PN Ø Standard Clockwise-Close (Open-Left). Anticlockwise-Close available to special order. 10
13 EN588-1 SERIES 15 RESILIENT WEDGE GATE VALVE Part Drawing ID PART NAME QTY. MATERIAL STANDARD 1 Body 1 EN-GJS DI EN1563: Bonnet 1 EN-GJS DI EN1563: Disc 1 EN-GJS DI / EPDM EN1563: Stem Nut 1 CC331G AL BZ EN1982: Stem SS EN : Gasket 1 EPDM WA, EN681-1: Bonnet Bolt 4 304SS GB / T Stem Cap 1 EN-GJS DI EN1563: Gland Bushing 1 CW617N Brass EN12164: O-Ring 1 EPDM WA, EN 681-1: Cap Screw 1 304SS GB / T Thrust Collar 2 CW617N Brass EN12164: Groove Pin 1 316SS - 14 Wiper Ring 1 EPDM WA, EN681-1: O-Ring 2 EPDM - 16 O-Ring 1 EPDM - 11
14 EN588-1 SERIES 15 RESILIENT WEDGE GATE VALVE Dimensional Data H1 H H2 DN Dt D D B F L T t BCD N-ØD DN PN WT. -KG F B H2 H1 H t T N-ØD BCD Dt D L TURNS TO CLOSE 50 PN Ø PN Ø PN Ø PN Ø PN Ø PN Ø PN Ø PN Ø PN Ø PN Ø PN Ø PN Ø Standard Clockwise-Close (Open-Left). Anticlockwise-Close available to special order. 12
15 13 NOTES
16 NOTES 14
17 15 NOTES
18 PRATT PRODUCT GUIDE Model 2FII Monoflange MKII Plug Valve Triton XR70 Indicating Butterfly Valve UL & FM approved Tilting Disc Check Valve Knife Gate Valve N-Stamp Nuclear Butterfly Valve Cone Valve Rectangular PIVA Post Indicating Valve Assembly UL & FM approved Sleeve Valve Rubber Seated Ball Valve Triton HP250 Check Valve Metal Seated Ball Valve Control Systems Plunger Valve Air Valve 401 S. Highland Ave., Aurora, IL 60506, P: For more information about Pratt or to view our full line of water products, please visit or call Pratt customer service at Mueller refers to one or more of Mueller Water Products, Inc., a Delaware corporation ( MWP ), and its subsidiaries. MWP and each of subsidiaries are legally separate and independent entities when providing products and services. MWP does not provide products or services to third parties. MWP and each of its subsidiaries are liable only for their own acts and omissions and not those of each other. MWP brands include Mueller, Echologics, Hydro Gate, Hydro-Guard, Jones, Mi.Net, Milliken, Pratt, Singer, and U.S. Pipe Valve & Hydrant. Please see to learn more. Copyright 2018 Henry Pratt Company, LLC. All Rights Reserved. The trademarks, logos and service marks displayed in this document are the property of Mueller Water Products, Inc., its affiliates or other third parties. Products above marked with a section symbol ( ) are subject to patents or patent applications. For details, visit These products are intended for use in potable water applications. Please contact your Mueller Sales or Customer Service Representative concerning any other application(s). F /18
COMPACT CHECK VALVES Engineering Creative Solutions for Fluid Systems Since 1901
COMPACT CHECK VALVES Engineering Creative Solutions for Fluid Systems Since 1901 TABLE OF CONTENTS SPRING LOADED CHECK VALVES Standard Features... 1 DOUBLE DISC CHECK VALVE Scope of the Line... 1 Technical
More informationAWWA SWING CHECK VALVES. Engineering Creative Solutions for Fluid Systems Since 1901
AWWA SWING CHECK VALVES Engineering Creative Solutions for Fluid Systems Since 1901 TABLE OF CONTENTS AWWA SWING CHECK VALVE Series 8001 Lever & Weight or Spring...1 Series 9001 Lever & Weight or Spring...2
More informationISO-DE Double Eccentric Butterfly Valves
ISO-DE Double Eccentric Butterfly Valves Engineering Creative Solutions for Fluid Systems Since 1901 401 South Highland Avenue Aurora, Illinois 60506-5563 www.henrypratt.com phone: 630.844.4000 moreinfo@henrypratt.com
More informationMANUAL VALVE ACTUATORS. Engineering Creative Solutions for Fluid Systems Since 1901
MANUAL VALVE ACTUATORS Engineering Creative Solutions for Fluid Systems Since 1901 TABLE OF CONTENTS MANUAL VALVE ACTUATOR Scope of Line: Valve Actuators... 1 Manual Valve Actuator Dimensional Data...
More informationHP250II AND HP250 BUTTERFLY VALVES Engineering Creative Solutions for Fluid Systems Since 1901
H250II AND H250 BUTTERFLY VALVES Engineering Creative Solutions for Fluid Systems Since 1901 TABLE OF CONTENTS RATT H250II Scope of Line... 1 Design and Construction Details... 1 ipe Mating Chart... 1
More informationRECTANGULAR BUTTERFLY VALVES. Engineering Creative Solutions for Fluid Systems Since 1901
RECTANGULAR BUTTERFLY VALVES Engineering Creative Solutions for Fluid Systems Since 1901 TABLE OF CONTENTS Scope of Line...1 Material / Features and Benefits...2 Special Requirements...2 Design Details...3-4
More informationRectangular Butterfly Valve
OPERATION/MAINTENANCE MANUAL Rectangular Butterfly Valve TABLE OF CONTENTS PAGE General Information 2 Installation and Operating Instructions 3 Maintenance and Troubleshooting 4 Parts Information 5 WARNING:
More informationBF Series Wafer/Lug Butterfly Valves
BF Series Wafer/Lug Butterfly Valves Engineering Creative Solutions for Fluid Systems Since 1901 401 South Highland Avenue Aurora, Illinois 60506-5563 www.henrypratt.com phone: 630.844.4000 moreinfo@henrypratt.com
More informationMETAL SEATED BALL VALVE Engineering Creative Solutions for Fluid Systems Since 1901
METAL SEATED BALL VALVE Engineering Creative Solutions for Fluid Systems Since 1901 TABLE OF CONTENTS PRATT METAL SEATED BALL VALVE Introduction... 1 Scope of Line... 2 Features and Benefits... 2 Suggested
More information740G Double Disc Check Valve
OPERATION/MAINTENANCE MANUAL 740G Double Disc Check Valve TABLE OF CONTENTS PAGE General Information 2 Installation / Operation 3 Troubleshooting / Assembly 4 Parts Information 5 WARNING: 1. Read all applicable
More information720G Wafer and 821G Globe Style Silent Check Valves
OPERATION/MAINTENANCE MANUAL 70G Wafer and 1G Globe Style Silent Check Valves TABLE OF CONTENTS PAGE General Information / Installation Installation / Operation Troubleshooting / Assembly 4 Parts Information
More informationMULTI-PORT PLUG VALVE Engineering Creative Solutions for Fluid Systems Since 1901
MULTI-PORT PLUG VALVE Engineering Creative Solutions for Fluid Systems Since 1901 PRATT MULTI- PORT PLUG VALVE Quality, reliability, safety and value are the criteria embodied in Pratt's Multi-Port plug
More informationAWWA Swing Check Valves
AWWA Swing Check Valves Engineering Creative Solutions for Fluid Systems Since 1901 A Tradition of Excellence With the development of the first rubber seated butterfly valve more than 70 years ago, the
More informationCCNE Check Valves Engineering Creative Solutions for Fluid Systems Since 1901
CCNE Check Valves Engineering Creative Solutions for Fluid Systems Since 1901 A Tradition of Excellence With the development of the first rubber seated butterfly valve more than 70 years ago, the Henry
More informationInnovative Products For Unique Applications. A Tradition of Excellence. Creative Engineering for Fluid Systems. Earthquake Proof Valves
A Tradition of Excellence With the development of the first rubber seated butterfly valve more than 70 years ago, the Henry Pratt Company became a trusted name in the flow control industry, setting the
More informationMILLCENTRIC FULL/100% POR T ECCENTRIC PLUG VALVE
ISO 9001 CERTIFIED MILLCENTRIC FULL/100% POR T ECCENTRIC PLUG VALVE Suggested Specifications The Milliken criteria of quality, reliability, safety and value are embodied in the Millcentric Eccentric valve,
More informationBallcentric Plug Valve
Ballcentric Plug Engineering Creative Solutions for Fluid Systems Since 1901 A Tradition of Excellence With the development of the first rubber seated butterfly valve more than 70 years ago, the Henry
More informationBF Series Wafer/Lug Butterfly Valves
BF Series Wafer/Lug Butterfly Valves Engineering Creative Solutions for Fluid Systems Since 1901 A Tradition of Excellence With the development of the first rubber seated butterfly valve more than 70 years
More informationCast Iron Valves. Product Information. It s all at Albion
Cast Iron Valves Product Information It s all at Albion ART 77-78 Cast Iron Ball Valve Flanged Ends Flange Mounting PN16 Only ISO 5211 Direct Mount (Not 200mm) Art 77/78 Plated Brass/Stainless Ball BS
More informationBALL VALVES. Industry-Leading 300psi Low Lead Ball Valves
BALL VALVES Industry-Leading 300psi Low Lead Ball Valves Designed and Manufactured to Meet Your Needs 1 Lockwing Accepts bullet lock (when equipped on meter valve). 2 Stainless steel reinforced seat gaskets
More information3" 20" Bonded Seat Butterfly Valves
INSTALLATION/OPERATING MANUAL 3" 20" Bonded Seat Butterfly Valves TABLE OF CONTENTS PAGE General Information 2 Installation Instructions 3-4 Operation Instructions 4 Start-Up Procedure / Maintenance 5
More informationInnovative Products For Unique Applications. A Tradition of Excellence. Creative Engineering for Fluid Systems. Earthquake Proof Valves
A Tradition of Excellence With the development of the first rubber seated butterfly valve more than 70 years ago, the Henry Pratt Company became a trusted name in the flow control industry, setting the
More informationBS 5163 Resilient Wedge Gate Valve
BS 516 Resilient Wedge Gate Valve BS 516 Flanged Resilient OS&Y Gate Valve, Type A, (XZ41X), /16, Gate valves serve to cut the medium flow in the piping system, widely used in the field of potable water,
More informationCast-Iron Valves G101 DI BUTTERFLY VALVE LEVER... 2 G401 CI GLOBE VALVE CL G403 CI GLOBE VALVE PN G103 DI BUTTERFLY VALVE GEAR...
Cast-Iron Valves PAGE G101 DI BUTTERFLY VALVE LEVER.... 2 PAGE G401 CI GLOBE VALVE CL125.... 9 G103 DI BUTTERFLY VALVE GEAR.... 3 G403 CI GLOBE VALVE PN16.... 10 G201 CI Y STRAINER CL125.... 4 G501 CI
More informationAmerican Flow control Series 2500
American Flow control 14-66 Series 2500 Resilient wedge gate valve FLOW CONTROL Construction Ductile iron operating nut Provides strength and durability. Lifting DEVICES 14-66 Valve is constructed of high-strength
More informationApproved Branded Traceable Fire Protection & Waterworks Valves
Approved Branded Traceable Fire Protection & Waterworks Valves (800) 766-0076 www.smithcooper.com Los Angeles, CA Atlanta, GA Vancouver, WA Chicago, IL AWWA C515 Compliant CONSIDER Your Options Tamper
More informationflowit by Fig. FTBGW-20 Bronze Gate Valve, Non-Rising Stem BS 5154 PN20 Material Specifications Dimensions (mm)
flowit flowit by Bronze Gate Valve, Non-Rising Stem BS 5154 PN20 Fig. FTBGW-20 Designed to BS 5154 Pressure Rating: PN20 Threaded Bonnet End connection: BS21 Taper Threaded (ISO 7) / BS EN10226-2 Shell
More informationKENNEDY VALVE KS-RW RESILIENT WEDGE VALVES
KENNEDY VALVE KS-RW RESILIENT WEDGE VALVES KENNEDY VALVE AWWA C515 Resilient Wedge Gate Valves Meet or Exceed the Requirements of AWWA Standard C515 UL-262/FM-1120/1130 ULC-Underwriters of Canada 2 1/2
More information516509_tabs 11/16/10 4:55 AM Page 1 FIRE HYDRANTS
Date Printed: November 2010 FIRE HYDRANTS or Tyton (6"),6, or 8" A EDDY FIRE HYDRANTS PARTS LIST WORKING PRESSURE: 150 PSI Note: Discontinued For Reference Only 350 PSI Working Pressure
More informationSuggested Specifications
ISO 9001 Certified Suggested Specifications The Milliken criteria of quality, reliability, safety and value are embodied in the Millcentric Eccentric valve, setting higher standards for dependable performance
More informationSeries 800 AWWA Butterfly Valves
Series 800 AWWA Butterfly Valves Valve and Gate Group A Century of Experience GA valves are known for long term reliability in the most demanding water and wastewater applications. Whether a simple check
More informationBUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
More informationApproved. Size L H. 3" (76mm) 9-1/2" (241mm) 5-51/64" (147mm) 46. 4" (102mm) 11-1/2" (292mm) 6-45/64" (170mm) 81
pproved. Model: SD-NRV200CV Flanged Ends The Flanged End Check Valves are made of Iron Body, Bolted Bonnet and Horizontal Swing, painted with standard color. Epoxy coated inside and outside to WW C550
More informationAVK TOTAL CONTROL INSIDE BUILDINGS GENERAL VALVES FOR BUILDING
AVK TOTAL CONTROL INSIDE BUILDINGS GENERAL VALVES FOR BUILDING SERVICE MEMBER OF THE GROUP GATE VALVE RESILIENT SEATED FULLY VULCANIZED WEDGE Product series: S02, S21, S06, S15, S55 Rising stem/non rising
More informationValves Range RVRX - Resilient Seated Gate Valve PN16 Flange
Valves Range RVRX - Resilient Seated Gate Valve PN16 Flange No Component Material 1 Body Ductile iron GGG40 2 Wedge DI Fully Vulcanised EPDM 3 Wedge Nut Brass 4 Stem SS420 5 Bolt Q235+Zinc 6 Gasket EPDM
More informationCLASS 400 FORGED BRASS BALL VALVE
CLASS 400 FORGED BRASS BALL VALVE FIG. 214 Screwed body cap, PTFE seats, Blowout-proof stem. Screwed ends to BS 21. Nickel plated body. Chrome plated ball. UNI-FLO NYLON BALL VALVES FIG. 214NS/NB Features:
More informationOPTIMAL VALVE SOLUTIONS FOR OIL AND GAS PLANTS
AVK FLOW CONTROL OPTIMAL VALVE SOLUTIONS FOR OIL AND GAS PLANTS InterApp World Valve Wouter Witzel TEC artec AVK 1 2 AVK FLOW CONTROL l OIL & GAS PLANTS CONTENT: AVK FLOW CONTROL 4-5 OFFSHORE PRODUCTION
More informationButterfly Valve. Product Training Presentation Danfoss Flomatic Corporation
Click to see: Butterfly Valves in our Online Catalog Butterfly Valve Product Training Presentation Danfoss Flomatic Corporation REV:082303 Butterfly Valve SYLAX SERIES 149G BUTTERFLY VALVES Wafer and Lug
More informationMetal Seated Ball Valve
Metal Seated Ball Engineering Creative Solutions for Fluid Systems Since 1901 A Tradition of Excellence With the development of the first rubber seated butterfly valve more than 70 years ago, the Henry
More informationSwing Check Valves - Series 41
Tender Text Data Sheets Swing Check Valves - Series 41 The swing check valves are typically installed after a pump unit in order to prevent the water from flowing back through the pump, when it stops.
More informationPN10/16 & PN25 Ballcentric Plug Valve
PN10/16 & PN25 Ballcentric Plug Valve Engineering Creative Solutions for Fluid Systems Since 1901 A Tradition of Excellence With the development of the first rubber seated butterfly valve more than 70
More informationSentinel 250 Fire Hydrant. Solid design and features to meet any municipal requirement.
Sentinel 250 Fire Hydrant Solid design and features to meet any municipal requirement. Product Features That meet any municipal requirement. 1 Operating Nut Shields the hold down nut from tampering and
More informationInnovative Products For Unique Applications. A Tradition of Excellence. Creative Engineering for Fluid Systems
page 1 A Tradition of Excellence With the development of the first rubber seated butterfly valve more than 70 years ago, the Henry Pratt Company became a trusted name in the flow control industry, setting
More informationJ & S Valve GATE VALVE AWWA C509. Resilient Seated Solid Wedge Size: 2-12
J & S Valve GATE VALVE Resilient Seated Solid Wedge Size: 2-12 AWWA C509 Resilient Seated Solid Wedge Gate Valve Series 6000 AWWA C509 2 Operating Nut or Hand Wheel Stem Stainless Steel or Bronze Gland
More informationWAFER STYLE KNIFE GATE VALVE
WAFER STYLE KNIFE GATE VALVE The EX(SER.10) model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging
More informationAWWA C515 REDUCED WALL DUCTILE IRON
30" - 54" R/W VALVES AWWA C515 Resilient Wedge Gate Valves Meet or Exceed the Requirements of AWWA Standard C515 Water Working Bubble Tight Hydrostatic Shell Size Range Pressure psi Test psi Test psi AWWA
More informationValves. BS Standard JINAN MEIDE CASTING CO., LTD.
Valves BS Standard JINAN MEIDE CASTING CO., LTD. Resilient Wedge Gate Valve XZ81X Grooved Resilient OS&Y Gate Valve Page 11 XZ51X Flanged x Grooved Resilient OS&Y Gate Valve Page 12 Z85X Grooved Resilient
More informationWato Product Range includes:
europevalves Wato is an innovative engineering and production company that offers products and services for water supply and sewerage systems with distributors in the whole world. With its products and
More informationLATEST ARRIVALS CATALOGUE STOCK
LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL
More informationTechnical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE
Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE The B model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging
More informationFIRE HYDRANTS. Wet Barrel Fire Hydrants
FIRE HYDRANTS Wet Barrel Fire Hydrants Jones Wet Barrel Fire Hydrants With over 100 years of experience on the west coast the heart of the wet barrel market James Jones Company is the innovator in the
More informationDIMENSIONS (approximate)
Page 1 of 8 a NRS GATES OS&Y GATES company Model 48 Resilient Wedge Gate Valve SPECIFICATION SUBMITTAL SHEET FEATURES Sizes: 2 1/2" 3" 4" 6" 8" 10" 12" Maximum working water pressure 200 PSI Maximum working
More informationPROJECT TITLE PROJECT NO: CONTRACT TITLE GRANT NO: UNIVERSITY OF CALIFORNIA, DAVIS CITY, CALIFORNIA
The following standard specification is intended to be edited according to the specifics of the project. Brackets [ ] and areas shaded in gray [e.g. format] indicate requirements that are optional depending
More information24 and Larger Butterfly Valves
installation/operating manual 24 and Larger Butterfly Valves table of contents PAGE General Information 2 Installation Instructions 3-4 Operation Instructions 4 Start-up Procedure and Maintenance 5 Troubleshooting
More informationTHROUGH CONDUIT KNIFE GATE VALVE. OBX 09/11 2nd EDITION Revision 1 Reserves the right to change specifications without notice
THROUGH CONDUIT KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging shut off on either normal or
More informationBI-DIRECTIONAL KNIFE GATE VALVE
BI-DIRECTIONAL KNIFE GATE VALVE The model knife gate is a bi-directional valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on suspended
More informationmh-valve.com 129 HYDRANT AWWA C502 NSF 61/372 CERTIFIED UL LISTED FM APPROVED 250 PSI WORKING PRESSURE 10-YEAR LIMITED WARRANTY
mh-valve.com 129 HYDRANT AWWA C502 NSF 61/372 CERTIFIED UL LISTED FM APPROVED 250 PSI WORKING PRESSURE 10-YEAR LIMITED WARRANTY 129 HYDRANT YESTERDAY, TODAY, & TOMORROW For more than 85 years, the M&H
More informationINSTALLATION, OPERATION, and MAINTENANCE GUIDE NIBCO Wall Mount Indicator Posts Series NIP-2AW
INSTALLATION, OPERATION, and MAINTENANCE GUIDE NIBCO Wall Mount Indicator Posts Series NIP-2AW PATENT #US 9,541,218 NIBCO Series NIP-2AW Wall Mount Indicator Posts are designed and manufactured to: Operate
More informationND = Double Door, SEAT NBR ES = Center Guided Silent Check / EPDM NS = Center Guided Silent Check / NBR. Butterfly Valves, Seat in body.
MAS-WDI-1118 MAS W-Series Water Works / Fire Protection Valves ORDERING CODES Series XX = Valve Type X = CWP XX = Design Type XX = End Connection W = AWWA/UL/FM, 10 = Gate Valve A = 300 CWP RS = Rising
More informationSWING CHECK VALVES SERIES 52-SC SERIES 600
SWING CHECK VALVES SERIES 52-SC SERIES 600 FEATURES/BENEFITS/SPECIFICATIONS AMERICAN Flow Control Series 52-SC Swing Check Valves incorporate design features to help increase service life for water and
More informationSUBMITTAL PACKAGE FIRE PROTECTION VALVES
SUBMITTAL PACKAGE FIRE PROTECTION VALVES Butterfly Valves Ductile Iron Grooved...pg 2-5 Grooved Check Valves...pg 6-8 OS&Y Valves...pg 9-12 ARGCO.com 800-854-1015 Updated 2/27/2017 ARGCO GROOVED BUTTERFLY
More informationWAFER STYLE KNIFE GATE VALVE
11 WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off
More informationSection 14. Gate Valves
Section 14 Gate Valves 221 A-Gate Brass Gate Valve S Brass Brass Brass Brass and Wheel Ductile Iron Threading ISO 228 Thread BSP 180 C 16 bar General Purpose Brass Gate Valve AGVFF/015 15 43 85 50 0.24
More informationA Tradition of Excellence. Innovative Products For Unique Applications. Creative Engineering for Fluid Systems. Earthquake Proof Valves
46165 Butterfly 3-20 Valves:34551 Butterfly 3-20 Valves 9/15/10 9:05 AM Page 1 A Tradition of Excellence With the development of the first rubber seated butterfly valve more than 70 years ago, the Henry
More informationwith the specific application. Always read and understand the installation
Worldwide Contacts www.tyco-fire.com Resilient-Seated Gate Valves Outside Screw and Yoke General Description TYCO Resilient-Seated Gate Valves are used in Fire Protection Systems for on/off operation.
More informationSpecifications For Valve Insertion System
Specifications For Valve Insertion System Equipment For Valve Insertion Pipe Sizes: 4 (100mm) Through 12 (300mm) 1.0 SCOPE This specification covers the furnishing, complete EZ Valve insertion system.
More informationModel descriptions. 2. For other pressure and temperature limits, consult ANSI B16 cast iron flange standards.
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Cast Iron Liquid Relief Valves Model 228 Model descriptions Model 91: Bronze trim, with pressure-tight cap. Suitable for maximum back pressure of 60
More informationOPERATION AND MAINTENANCE MANUAL 2-66 SERIES 2500 RESILIENT WEDGE GATE VALVE
OPERATION AND MAINTENANCE MANUAL 2-66 SERIES 2500 RESILIENT WEDGE GATE VALVE INDEX SERIES 2500 DUCTILE IRON RESILIENT WEDGE GATE VALVE OPERATION and MAINTENANCE MANUAL. OPERATION AND MAINTENANCE Operation,
More informationBS 1452 Gr Gr. 420/ Gr. 420/ AB2 304 C C S S S S16. E mm
WAFER TYPE BUTTERFY VAVE SPECIFICATION FOR BS EN 1092-2 PN10 / PN16 FANGE MOUNTING FACE-TO-FACE DIMENSION TO ISO 5752 / BS 5155 / BS EN 593 EVER / WORM GEAR OPERATOR PRESSURE / TEMPERATURE RATINGS BFV-WB
More informationBUTTERFLY VALVE ST BUTTERFLY VALVE VALVES - 31
BUTTERFLY VALVE ST BUTTERFLY VALVE REVREV 6.2 6.2 / Nov. / Nov. 2017 2017 VALVES - 31 High Performance Butterfly Valve STHW STHL Size : 2 ~ 24 Type: Wafer, Lug Pressure Rating: Class 150, 300 Body Material:
More informationBI-DIRECTIONAL KNIFE GATE VALVE
Wastewater treatment plants Food and Beverage Chemical plants Sizes: Working pressure: DN 2"/ 50mm to DN 10"/ 250mm DN 12"/300mm to DN 16"/ 400mm DN 18"/450mm DN 20"/500mm to DN 24"/ 600mm DN 28"/700mm
More informationRESILIENT SEATED BUTTERFLY VALVES. Howell Valve & Automation. Toll Free: Howellvalve.com
RESILIENT SEATED BUTTERFLY VALVES Howell Valve & Automation Toll Free: 1-888-469-3557 Howellvalve.com TABLE OF CONTENTS Description Page Index 2 Resilient Standard Features 3 ST Boot Series with BUNA-N
More informationRESILIENT SEATED GATE VALVE FAF 6200
PRODUCTION STANDARTS DN40 DN800 PN 10-16 Design EN 1171 / EN 1074 Connection Face to Face EN 1092-2 / ISO 7005-2 - Flanged EN 558 Series 15 / DIN 3202 F5 Marking EN 19 Tests EN 12266-1 Corrosion Protection
More informationBI-DIRECTIONAL KNIFE GATE VALVES XD-PRE SERIES WITH D/A PNEUMATIC ACTUATOR
BI-DIRECTIONAL KNIFE GATE VALVES XD-PRE SERIES KGV XD-PRE SERIES FULLY LUGGED WITH RISING STEM & HANDWHEEL KGV XD-PRE SERIES FULLY LUGGED WITH D/A PNEUMATIC ACTUATOR KGV XD-PRE SERIES FULLY LUGGED WITH
More informationCast Iron Liquid Relief Valves
Cast Iron Liquid Relief Valves Features Bolted bonnet permits easy inspection and servicing without removal from system. Quality cast iron body and bonnet, insert and disc are available in either bronze
More informationWAFER STYLE KNIFE GATE VALVE
WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on
More informationWater Distribution Solutions
Water Distribution Solutions Table of Contents WaterMaster 5CD250 Fire Hydrants 6 WaterMaster 5BR250 Fire Hydrants 8 FlowMaster Resilient Wedge Gate Valves 11 Valve Boxes 17 Meter Boxes 22 Table of Contents
More informationHOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the
More informationSERIES 900 PLUG VALVES
K - F L O VA LV E S SERIES 900 PLUG VALVES VA LV E S F R O M 1 4 T H R U 4 8 PO Box 411 Berwick PA 18603 800-247-VALV www.crispinvalve.com 900 SerieS Plug Valve Sizes 14-48 Crispin/K-Flo Series 900 is
More informationMEDALLION HYDRANT. clowvalve.com AWWA C502 UL LISTED FM APPROVED NSF 61/372 CERTIFIED 250 PSI WORKING PRESSURE 10-YEAR LIMITED WARRANTY
clowvalve.com MEDALLION HYDRANT AWWA C50 UL LISTED FM APPROVED NSF 6/37 CERTIFIED 50 PSI WORKING PRESSURE 0-YEAR LIMITED WARRANTY Clow Valve, A Division of McWane, Inc. MEDALLION HYDRANT FIRE PROTECTION
More informationSERIES 2200 Replaceable Seat Butterfly Valves
SERIES 2200 Replaceable Seat Butterfly Valves Publication S2200-101 Issue 04/18 Rev. A Design Characteristics Multiple Seat Options VSI offers various seat options including EPDM, NBR, Viton, and others
More informationWater Distribution Solutions
Water Distribution Solutions Table of Contents WaterMaster 5CD250 Fire Hydrants 6 WaterMaster 5BR250 Fire Hydrants 8 FlowMaster Resilient Wedge Gate Valves 11 Valve Boxes 17 Meter Boxes 22 Table of Contents
More informationCAST STEEL FLANGED GATE, GLOBE, & CHECK VALVES.
CAST STEEL FLANGED GATE, GLOBE, & CHECK VALVES www.fnw.com Index Options & Accessories... 2 Standards... 2 Figure Number Matrix... 3 Pressure/Temperature Ratings... 3 Hydrostatic Test Pressures... 3 Carbon
More informationAWWA C504 - BUTTERFLY VALVES
License Number 6D-1724 AWWA C504 - BUTTRFLY VALVS License Number 6D-1724. Gate Valves Knife Gate Valves Ball Valves Check Valves Plug Valves Air Release Valves Oil and Gas Water and Sewage, Chemicals Paper
More informationSERIES 2100 Resilient Seated Butterfly Valves
SERIES 2100 Resilient Seated Butterfly Valves Publication S2100-101 Issue 06/16 Rev. C Design Characteristics Applications Commercial Heating & Air Conditioning Waste Water & Water Treatment Sea Water
More informationWAFER STYLE KNIFE GATE VALVE
MODEL WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut
More information740G Double Disc Check. Valve. Operation / Maintenance Manual. General Information 2. Installation/Operation 3
Operation / Maintenance Manual 740G Double Disc Check table of contents PAGE General Information 2 Installation/Operation 3 Troubleshooting & Disassembly/Reassembly 4 Parts Information 5 Valve! WARNING:
More informationADMIRAL HYDRANT. clowvalve.com
clowvalve.com ADMIRAL HYDRANT AWWA C502 UL LISTED FM APPROVED NSF 61/372 CERTIFIED 250 PSI WORKING PRESSURE 350 PSI WORKING PRESSURE AVAILABLE 10-YEAR LIMITED WARRANTY Clow Valve, A Division of McWane,
More informationL15 HEAVY DUTY KNIFE GATE VALVE STANDARD PARTS LIST
L15 HEAVY DUTY KNIFE GATE VALVE The L15 model knife gate is a uni-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The design of the body
More informationALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN
BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric
More informationPRATT SERIES 300 PLUNGER VALVES. Engineering Creative Solutions for Fluid Systems Since 1901
PRATT SERIES 300 PLUNGER VALVES Engineering Creative Solutions for Fluid Systems Since 1901 TABLE OF CONTENTS Features and Benefits...1 Pratt Series 300 Plunger Valves... 2-3 Performance and Control...4
More informationAMERICAN FLOW CONTROL 3-16 SERIES 2100 RESILIENT SEATED CHECK VALVE
AMERICAN FLOW CONTROL 3-16 SERIES 2100 RESILIENT SEATED CHECK VALVE CONSTRUCTION STAINLESS STEEL PIPE PLUG Allows installation of pressure gauge. STAINLESS STEEL FASTENERS Helps provide corrosion resistance.
More informationKeystone Butterfly valve ParaSeal range
The ParaSeal range features a proven disc, shaft and seat arrangement designed for use in high pressure and high velocity applications Features General application Water, food and beverage processing,
More informationHattersley Newman Hender Ltd
Product Guide Quality Valves from Hattersley WHEN IT REALLY COUNTS, YOU CAN DEPEND ON HATTERSLEY Hattersley Newman Hender is one of the world s premier manufacturers of cast iron, ductile iron and copper
More informationKeystone Butterfly valve ParaSeal range
The ParaSeal range features a proven disc, shaft and seat arrangement designed for use in high pressure and high velocity applications Features General application Water, food and beverage processing,
More informationTechnical Data. Sizes 2 in. to 24 in. (DN50 to DN600) Approvals UL and ULC Listed FM Approved
Worldwide Contacts www.tyco-fire.com Model TJP Resilient-Seated Gate Valves with Vertical or Cross Wall Post Indicator General Description TYCO Model TJP Resilient-Seated Gate Valves with Vertical and
More informationBUTTERFLY VALVES KENNEDY 140 YEARS AWWA C504 CLASS 150B & 250B CERTIFICATIONS ISO 9001 ISO BS OHSAS
KENNEDY BUTTERFLY S CERTIFICATIONS ISO 9001 ISO 14001 BS OHSAS 18001 AWWA C504 CLASS 150B & 250B STYLE 4500 3-24 STYLE 1450 30-54 CONSULT KENNEDY FOR SIZES LARGER THAN 54 INCHES. 140 YEARS WWW.KENNEDY.COM
More informationSECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
PART 1 - GENERAL 1.1 DESCRIPTION OF WORK A. Provide labor, materials, equipment, and services necessary to install valves required to complete the work indicated on drawings. B. ASME Compliance: 1. ASME
More informationFabricated Bevel Gear Operator Bi-Directional Metal Seat 150 PSI Bi-Directional Resilient Seat 150 PSI
Knife Gate Valves Uni-Directional (Metal Seated) Manual Handwheel Style KGV...2 Carbon Steel Technical Data 150 PSI 2 24...3 304 Stainless Steel Technical Data 150 PSI 2 24...3 316 Stainless Steel Technical
More informationKnife Gate & Butterfly Valves Data Sheets
Knife Gate & Butterfly Valves Data Sheets Series 80-TP Series 80-TP/XL Series 80-BA Series 80-SS Series 80-SSRS Series 80-DI Series 150 Series 120 Butterfly Valves Series TM-3 & TM-4 Butterfly Valves www.townley.net
More information