Looking for a gas spring replacement...

Transcription

1 Welcome to...

2 ooking for a gas spring replacement... For over 40 years ACE has been successfully manufacturing and supplying a wide range of motion control products. Industrial gas springs have always been a key part of the ACE product range and today some 28 standard models with body diameters of 8 to 70mm are offered, push and pull type, black coated steel and stainless steel. However, despite having this successful range, ACE is always being asked for the urgent replacement of gas springs to match other widely used products from Stabilus, Suspa and many others. Therefore, to meet this growing and ongoing demand for gas spring equivalents from stock, ACE has introduced the new replace range of force adjustable gas springs. eveloped primarily to match the stroke, end fittings and installation length of the most widely used Stabilus gas springs, the three RGS models offered can provide equivalents for around 1000 standard ift-o-mat 6-15, 8-19, and products. Product data sheets are shown here and a replace/stabilus cross reference guide can be found at replace do it from stock Ace Controls International Unit 404, Easter Park, Haydock ane Haydock WA11 9TH Tel: Fax: replace@ace-controls.co.uk Web:

3 Equivalent for Stabilus 6 15 Extension forces 50N to 400N ET 3 ø6 ø15 ACE ET ø6.1 STROKE ±2mm Extended WX22 Ball ø10 imensions CX27 12 M8 Type Stroke mm Extended RGS RGS RGS RGS RGS RGS RGS E-GAS-5 Tool (only needed if force is unknown) Part Numbers replace part number examples: RGS ET-ET-V-400N (Equivalent to ift-o-mat ) RGS WX22-CX27-V-50N (Equivalent to ift-o-mat ) Note: RGS models are designed to closely match the stroke, end fittings and installation length of standard ift-o-mat gas springs. To aid product selection use cross reference guide at Technical Information On request: Alternative end fittings, wiper Mounting: We recommend mounting with piston rod downwards to take advantage of the built-in end position damping Material: Body-Black coated steel. Piston rod-with wear-resistant coating. End fittings-zinc plated steel Progression (Force increased when fully compressed): Approx 27% imensions: All in millimetres (mm)

4 Equivalent for Stabilus 8 19 & Extension forces 100N to 1200N AX24 5 ø10 ø23 ACE AX24 ø8.1 STROKE ±2mm Extended WG18 Ball ø10 imensions Type Stroke mm Extended CX33 12 M8 RGS RGS RGS RGS RGS RGS RGS RGS RGS RGS RGS RGS RGS RGS E-GAS-8 Tool (only needed if force is unknown) Part Numbers replace part number examples: RGS AX24-AX24-V-500N (Equivalent to ift-o-mat ) RGS WG18-CX33-V-500N (Equivalent to ift-o-mat ) Note: RGS models are designed to closely match the stroke, end fittings and installation length of standard ift-o-mat gas springs. To aid product selection use cross reference guide at Technical Information On request: Alternative end fittings, wiper Mounting: We recommend mounting with piston rod downwards to take advantage of the built-in end position damping Material: Body-Black coated steel. Piston rod-with wear-resistant coating. End fittings-zinc plated steel Progression (Force increased when fully compressed): Approx 35 64% imensions: All in millimetres (mm)

5 Equivalent for Stabilus Extension forces 150N to 2500N AX21 18 ø14 ø28 12 ACE AX18 ø10.2 STROKE ±2mm Extended C10 Ball ø16 imensions C10 20 M10 Type Stroke mm Extended RGS RGS RGS RGS RGS RGS RGS RGS E-GAS-10 Tool (only needed if force is unknown) Part Numbers replace part number examples: RGS AX21-AX18-V-1500N (Equivalent to ift-o-mat ) RGS C10-C10-V-1500N (Equivalent to ift-o-mat ) Note: RGS models are designed to closely match the stroke, end fittings and installation length of standard ift-o-mat gas springs. To aid product selection use cross reference guide at Technical Information On request: Alternative end fittings, wiper Mounting: In any position Advice: We recommend mounting with piston rod downwards to take advantage of the built-in end position damping Material: Body-Black coated steel. Piston rod-with wear-resistant coating. End fittings-zinc plated steel Progression (Force increased when fully compressed): Approx 60-95% imensions: All in millimetres (mm)

6 General Gas Spring Replacement Enquiry Form * RO IAMETER * BOY IAMETER HOE IAMETER * STROKE Step 1: Enter *dimensions (mm) in the 4 boxes above * EXTENE CENTRE TO CENTRE OF EN FITTINGS Angle THREA ENGTH THREA IAMETER Step 2: Circle the type of end fitting & enter dimensions into boxes Rod End Fitting Type: / Angle / Clevis Fork / Ball Socket Clevis Fork SOT SIZE BA SOCKET IAMETER PIN IAMETER imension imension Body End Fitting Type: / Angle / Clevis Fork / Ball Socket imension imension Note: If threads are not metric coarse please give full spec. ie UNC, UNF etc. Ball Socket Step 3: Answer the questions below o you require an adjustable force gas spring: Yes / No (Note: If no, you must give a force below) Required force of gas spring if known: Customer etails Company Name: Contact: Address: Part number of existing gas spring if known: Stainless steel: Yes / No Quantity required: Note: If you require a locking gas spring or traction gas spring (pull type rod retracted) please telephone us on Tel No: Fax No: Please copy, complete and return to Ace.