Stainless Steel Industrial Gas Springs (Push Type)
|
|
|
- Edwin Fisher
- 6 years ago
- Views:
Transcription
1 Stainless Steel Industrial Gas Springs (Push ) Stainless steel gas springs (push type) Material 1.1/1., AISI /3 (V2A), Material 1.0/1.71, AISI 31/31Ti (VA) In addition to the comprehensive range of industrial gas springs with valve, ACE also offers a wide range of industrial gas springs made of stainless steel with body diameters from to 70. This high-quality version is also available on request in all stroke lengths and possible extension forces. The comprehensive range of fitting parts ensures easy installation and makes the gas springs universal in use. Stainless steel industrial gas springs are used everywhere that raising and lowering is required. Due to their special properties, non-rusting and low magnetism, they are the preferred equipment for medical and clean-room technology, the foodstuffs industry, electronics and shipbuilding sector. Rear End Cap in Stainless Steel Stainless Steel Body Gas Valve Oil Zone for End Position Damping and ubrication (recoended mounting position: piston rod downwards) Front Bearing in Brass Stainless Steel Piston Rod Operating fluid: Nitrogen gas and oil Material: Piston rod, body and end fittings: Material 1.1/1., AISI /3 (V2A) or material 1.0/1.71, AISI 31/31Ti (VA). Advice: We recoend mounting with piston rod downwards to take advantage of the built-in end position damping. Operating temperature range: -20 C to 0 C On request: Without damping, strong end position damping, special force curves, wiper, special lengths, alternative end fittings. Issue.20 Specifications subject to change
2 Stainless Steel Gas Springs GS--VA (Push ) Extension Forces 2 N to 0 N (when Piston Rod Compressed up to 1 N) Standard NEW B3, M3.x0. Stud Thread B3, R. 3 Ø.1 1 Mx0.7 Ø 3 +/- 2 GS--20-VA GS---VA 92 GS--0-VA 0 1 GS--0-VA GS--0-VA 0 12 GS--0-VA Body Ø ( ) ( ) Piston Rod Body Nominal Force F 1 N see page 202. GS---AC--VA thick 1 Eye Angle Ball Joint Clevis Fork Ball Socket W3,--VA Ø = + Adjuster Knob U3, See page 13. Issue.20 Specifications subject to change O N GS--VA O N see page 202. force curves, special end fittings. Available force range F 1 at 20 C: 2 N to 0 N End position damping length: approx. Material: Piston rod, body and end fittings: Material 1.0/1.71, AISI 31/31Ti (VA). Progression: approx. %, F 2 max. 1 N
3 Stainless Steel Gas Springs GS--VA (Push ) Extension Forces N to 0 N (when Piston Rod Compressed up to N) Standard NEW B3, M3.x0. Stud Thread B3, R. 3 Ø.1 1 Ø 3 +/- 2 Mx0.7 Ø GS--20-VA GS---VA 92 GS--0-VA 0 1 GS--0-VA GS--0-VA 0 12 GS--0-VA Body Ø ( ) ( ) Piston Rod Body Nominal Force F 1 N see page 202. GS---AC--VA thick 1 Eye Angle Ball Joint Clevis Fork Ball Socket W3,--VA Ø 13 = + Adjuster Knob U3, See page O N GS--VA O N see page 202. force curves, special end fittings. Available force range F 1 at 20 C: N to 0 N End position damping length: approx. Material: Piston rod, body and end fittings: Material 1.0/1.71, AISI 31/31Ti (VA). Progression: approx. %, F 2 max. N Issue.20 Specifications subject to change 0
4 Stainless Steel Gas Springs GS--VA (Push ) Extension Forces 2 N to 200 N (when Piston Rod Compressed up to 23 N) Standard NEW B3, M3.x0. Stud Thread B3, R..1 Ø +/- 2 Ø GS--20-VA GS---VA 92 GS--0-VA 0 1 GS--0-VA GS--0-VA 0 12 GS--0-VA GS--0-VA GS--0-VA 0 2 GS--10-VA thick Eye Angle Ball Joint 3 Ø 1 Mx0.7 Body Ø ( ) (0 ) Piston Rod Body Nominal Force F 1 N see page 202. GS--0-AA--VA 1 Clevis Fork Ball Socket W3,--VA Ø 1. = + Adjuster Knob U3, See page 13. Issue.20 Specifications subject to change O N GS--VA O N see page 202. force curves, special end fittings. Available force range F 1 at 20 C: 2 N to 200 N End position damping length: approx. Material: Piston rod, body and end fittings: Material 1.0/1.71, AISI 31/31Ti (VA). Progression: approx. %, F 2 max. 23 N 1 1
5 Stainless Steel Gas Springs GS-1-VA (Push ) Extension Forces 0 N to 00 N (when Piston Rod Compressed up to 90 N) Standard B Mx0. Stud Thread B A-VA C-VA D-VA 1 E-VA R 2 Ø 3 Ø.1 20 Ø. Ø 7 +/- 2 Ø 9 1 Mx0. Ø 1. GS-1-20-VA 20 7 GS-1-0-VA 0 GS-1-0-VA 0 13 GS-1-0-VA 0 1 GS-1-0-VA 0 19 GS-1-0-VA 0 23 GS-1-0-VA 0 GS-1-10-VA Body Ø (1. ) (10 ) Piston Rod A-VA Body C-VA Nominal Force F 1 10 N s also available up to 0. see page 202. GS-1-10-AC-10-VA 7 thick 1 20 Eye A-VA max. force 90 N Angle Ball Joint C-VA max. force N Clevis Fork D-VA max. force 90 N Swivel Eye E-VA max. force 90 N G-VA Ball Socket G-VA max. force N. W-1-VA Ø 19 = Adjuster Knob U See page PA-VA OA-VA NA-VA MA-VA A-VA C-VA D-VA PG-VA GS-1-VA OG-VA E-VA G-VA NG-VA see page 202. force curves, special lengths, alternative end fittings, wiper. Gas springs and : Material 1.0/1.71, AISI 31/31Ti (VA). Available force range F 1 at 20 C: 0 N to 00 N End position damping length: Approx. 20 (depending on the stroke) Material: Piston rod, body and end fittings: Material 1.1/1., AISI /3 (V2A). Progression: Approx. 3%, F 2 max. 90 N Issue.20 Specifications subject to change
6 Stainless Steel Gas Springs GS-19-VA (Push ) Extension Forces 0 N to 700 N (when Piston Rod Compressed up to 9 N) Standard B Mx1.2 Stud Thread B A-VA C-VA D-VA E-VA R7 Ø20 Ø 13 1, Ø. 19 +/- 2 Ø1 1 Mx1.2 Ø1 Ø 19 GS-19-0-VA 0 1 GS-19-0-VA 0 2 GS VA 10 3 GS VA 200 GS VA 20 GS-19-0-VA 0 Body Ø (19 ) (10 ) Piston Rod A-VA Body C-VA Nominal Force F 1 00 N s also available up to 00. see page 203. GS AC-00-VA thick Eye A-VA max. force 10 N Angle Ball Joint C-VA max. force 0 N Clevis Fork D-VA max. force 10 N Swivel Eye E-VA max. force 10 N G-VA Ø20 3 Ball Socket G-VA max. force 0 N Ø 13 1 W-19-VA Ø 23 = + Adjuster Knob U See page 13. Issue.20 Specifications subject to change PA-VA OA-VA NA-VA MA-VA A-VA C-VA D-VA MA-VA PG-VA GS-19-VA OG-VA NG-VA E-VA G-VA see page 203. force curves, special lengths, alternative end fittings, wiper. Gas springs and : Material 1.0/1.71, AISI 31/31Ti (VA). Available force range F 1 at 20 C: 0 N to 700 N End position damping length: Approx. 20 (depending on the stroke) Material: Piston rod, body and end fittings: Material 1.1/1., AISI /3 (V2A). Progression: Approx. 33%, F 2 max. 9 N 3 3
7 Stainless Steel Gas Springs GS--VA (Push ) Extension Forces 0 N to 00 N (when Piston Rod Compressed up to 10 N) Standard B Mx1.2 Stud Thread B A-VA C-VA D-VA E-VA R7 Ø20 Ø Ø. 19 Ø +/- 2 Ø1 1 Mx1.2 Ø1 Ø 23 GS--0-VA 0 1 GS--0-VA 0 2 GS--10-VA 10 3 GS--200-VA 200 GS--20-VA 20 GS--0-VA 0 GS--30-VA 30 7 GS--00-VA 00 GS--0-VA 0 9 GS--00-VA GS--0-VA GS--00-VA GS--0-VA GS--700-VA Body Ø (23 ) (10 ) Piston Rod A-VA Body E-VA Nominal Force F 1 00 N GS--10-AE-00-VA thick Eye A-VA max. force 10 N Angle Ball Joint C-VA max. force 0 N Clevis Fork D-VA max. force 10 N Swivel Eye E-VA max. force 10 N G-VA Ø20 see page Ball Socket G-VA max. force 0 N Ø 13 W--VA 1 Ø 2 = + Adjuster Knob U See page 13. PA-VA OA-VA NA-VA MA-VA A-VA C-VA D-VA MA-VA PG-VA GS--VA OG-VA NG-VA E-VA G-VA see page 203. force curves, special lengths, alternative end fittings, wiper. Gas springs and : Material 1.0/1.71, AISI 31/31Ti (VA). Available force range F 1 at 20 C: 0 N to 00 N End position damping length: Approx. 20 (depending on the stroke) Material: Piston rod, body and end fittings: Material 1.1/1., AISI /3 (V2A). Progression: Approx. 32%, F 2 max. 10 N Issue.20 Specifications subject to change
8 Stainless Steel Gas Springs GS-2-VA (Push ) Extension Forces 10 N to 200 N (when Piston Rod Compressed up to 0 N) Standard B Mx1. Stud Thread B A-VA C-VA 1 Ø2 Ø D-VA E-VA R9 Ø 1 3 Ø Ø Ø 1 +/- 2 3 Mx1. Ø Ø19 Ø 2 GS-2-0-VA 0 GS-2-10-VA GS VA GS-2-20-VA 20 2 GS-2-0-VA 0 2 GS-2-30-VA GS-2-00-VA 00 2 GS-2-0-VA 0 92 GS-2-00-VA GS-2-0-VA 0 1 GS-2-00-VA 00 1 GS-2-0-VA Body Ø (2 ) (10 ) Piston Rod E-VA Body E-VA Nominal Force F 1 00 N s also available up to 70. see page 203. GS-2-10-EE-00-VA thick Eye A-VA max. force 0 N Angle Ball Joint C-VA max. force 170 N Clevis Fork D-VA max. force 0 N Swivel Eye E-VA max. force 0 N W-2-VA Ø 32 = + 0 Adjuster Knob U-VA See page 13. Issue.20 Specifications subject to change MA-VA A-VA GS-2-VA C-VA D-VA E-VA see page 203. force curves, special lengths, alternative end fittings, wiper. Gas springs and : Material 1.0/1.71, AISI 31/31Ti (VA). Available force range F 1 at 20 C: 10 N to 200 N End position damping length: Approx. 20 (depending on the stroke) Material: Piston rod, body and end fittings: Material 1.1/1., AISI /3 (V2A). Progression: Approx. 2%, F 2 max. 0 N
9 Stainless Steel Gas Springs GS-0-VA (Push ) Extension Forces 00 N to 000 N (when Piston Rod Compressed up to 7000 N) Standard B1 M1x1. Stud Thread B1 A1-VA C1-VA R. 1.1 Ø Ø Ø /- 2 Ø Ø 0 GS-0-0-VA GS-0-10-VA GS VA GS-0-0-VA GS-0-00-VA GS-0-00-VA GS-0-00-VA thick 2 Eye A1-VA max. force 7000 N Angle Ball Joint C1-VA max. force 3200 N D1-VA 3 E1-VA Ø1 3 Ø Ø M1x1. Ø2 Body Ø (0 ) (10 ) Piston Rod D1-VA Body D1-VA Nominal Force F N s also available up to 00. see page 20. GS-0-10-DD-300-VA Clevis Fork D1-VA max. force 7000 N Swivel Eye E1-VA max. force 7000 N 7 7 W1-0-VA Ø = Adjuster Knob U1-VA See page 13. ME1-VA A1-VA ND1-VA GS-0-VA C1-VA D1-VA ME1-VA E1-VA see page 20. force curves, special lengths, alternative end fittings, wiper. Gas springs and : Material 1.0/1.71, AISI 31/31Ti (VA). Available force range F 1 at 20 C: 00 N to 000 N End position damping length: Approx. (depending on the stroke) Material: Piston rod, body and end fittings: Material 1.1/1., AISI /3 (V2A). Progression: Approx. 0%, F 2 max N Issue.20 Specifications subject to change
10 Industrial Gas Springs Application Examples ACE industrial gas springs make opening and closing doors of rescue helicopters easier. The maintenance-free, sealed systems are installed in the access doors of helicopters of the type EC 13. There, they allow the crew to enter or exit the helicopter quickly, thus contributing to enhanced safety. The GS-19-0-CC gas springs provide a defined retraction speed and secure engagement of the door lock. The integrated end position damper allows gentle closing of the door and saves wear and tear on the valuable, lightweight material. Doors open and close safely Industrial gas springs: For safe entry and exit ACE industrial gas springs prevent injuries during maintenance work on harvesting machines. The blades of corn pickers are arranged under plastic hoods, which assure proper material flow within the machine. For maintenance purposes, the hoods, weighing about 7 kg, must be lifted up. To protect maintenance personnel from injury by falling hoods, they are kept in the open position by industrial gas springs of the type GS--20-DD. Another advantage they offer is their stability under rough operating conditions due to their wear-resistant coating on the piston rod and the coated housing. Issue.20 Specifications subject to change Protection under the hood Enhanced protection: Industrial gas springs secure heavy hoods 7 7
Stainless Steel Traction Gas Springs (Pull Type)
Stainless Steel Traction Gas Springs (Pull ) Stainless steel industrial traction gas springs Material 1.41/1.45, AISI 4/3 (V2A) Material 1.4404/1.4571, AISI 3/3Ti (V4A) In addition to the comprehensive
Industrial Gas Springs
Industrial Gas Springs Function, Calculation and Mounting Tips Gas springs are universally accepted, wherever you want to push pull lift lower, or position covers, lids or other components by hand without
Industrial Gas Springs Pull Type
4 Motion Control Industrial Gas Springs Pull Type Takes over when things get too tight for gas pressure springs If ACE gas push type springs cannot be used due to a lack of space, ACE s industrial gas
Traction Gas Springs GZ-15 to GZ-40 (Pull Type)
Traction Gas Springs GZ- to GZ-40 (Pull ) Industrial traction gas springs are maintenance-free and ready to install. They are available ex-stock with body diameters from to 40 and forces from N to 000
S: With magnet. Bore x stroke (basic type) Cushion P: pneumatic adjustable
series MK Standard cylinders according to ISO 15552 How to order? M K A P S 50 x 100 M: Marani A: Double acting S: With magnet Bore x stroke (basic type) K: According to ISO 15552, Mickey-mouse type Cushion
Push Type Gas Springs
Push Type Gas Springs ICTATOR high-performance push type gas springs make life easier by lifting loads smoothly and effortlessly. We have a vast product range with many potential applications. We manufacture
Air-Oil Systems, Inc. Gas Springs AGS 15 - AGS 28
Gas Springs GS 15 - GS 28 Gas Springs ontrols gas springs are reliable units designed to handle the demanding needs of the industrial and commercial markets. They are maintenance free and self-contained.
Gas Springs AGS 15 - AGS 28
Gas Springs GS 15 - GS 28 Gas Springs ontrols gas springs are reliable units designed to handle the demanding needs of the industrial and commercial markets. They are maintenance free and self-contained.
Looking for a gas spring replacement...
Welcome to... ooking for a gas spring replacement... For over 40 years ACE has been successfully manufacturing and supplying a wide range of motion control products. Industrial gas springs have always
ANTI-CORROSIVE CYLINDERS WITH TIE RODS Ø 32 to 125 mm - double acting - ISO with adjustable pneumatic cushioning
ANTI-CORROSIVE CYLINDERS WITH TIE RODS 32 to 125 mm - double acting - ISO 15552 with adjustable pneumatic cushioning NS Series S FEATURES The cylinders are designed for use in corrosive environments: chemical,
Pneumatic cylinders series CX Double acting with magnetic piston, ISO 15552, stainless steel G1/8 to G1/2 piston Ø 32 to 100 mm
Pneumatic cylinders series CX Double acting with magnetic piston, ISO 15552, stainless steel 000 400 Order code CX-032-0250-000 Note: Piston Ø 125, 160 and 200 on request. Series Piston Ø Stroke length
AIR CYLINDER Series A75, A76
A76 - n-magnetic A75 - Magnetic AIR CYLINDER Round s - Ø32, 40, 50 and 63 mm Double Acting with Adjustable Cushioning Features Available in magnetic and n magnetic version Adjustable cushioning at both
Air Cylinders. Fine Quality. Precision Engineered. Advanced Design. Excellent Prices S T C. Tel:
Air Cylinders Precision Engineered Fine Quality Excellent Prices Advanced Design connects fluid power to industrial automation Tel: 650-856 8833 www.stcvalve.com H1 83 Contents Air Cylinder Numbering System
Pull Type Gas Springs
Pull Type Gas Springs ICTATOR pull type gas springs are the answer to your problems if you are unable to use normal push type gas springs due to a lack of space. They work in the opposite way to push type
Accessories for Sliding Doors
Accessories for Sliding Doors DICTATOR provides various accessories for sliding lift doors. There are - bi-directional hydraulic ZDH dampers - Standard Haushahn door damper - spring rope pulleys - plastic
For double-acting actuators. Crossover-free switching. Safety function in the event of power failure provided by mechanical return spring
For double-acting actuators 5/ Directional Control Valves Actuation: Electromagnetic Indirect solenoid operation soft seal spool valve Connections G 1/, 1/ NPT, G 1/, NAMUR Interface Crossover-free switching
PKL Pneumatic Impactors
Copenhagen Vibrator Products PKL Pneumatic Impactors High impact power Low energy consumption Supreme silo emptying Rubber hammer effect option Automatic self-control option High temperature option Available
DICTATOR Final Dampers
DICTATOR DICTATOR final dampers are needed to slow down all kinds of rotative or linear movement. Their relatively long strokes offer sufficient saftey distances. The final dampers are available in both
USE AN ENGINEERED APPROACH TO TAILOR A PERFECT STANDARD GAS SPRING FOR YOUR DESIGN A GUIDE TO GAS SPRING DESIGN AND CUSTOMIZATION WH ITE PA P E R
WH ITE PA P E R USE AN ENGINEERED APPROACH TO TAILOR A PERFECT STANDARD GAS SPRING FOR YOUR DESIGN A GUIDE TO GAS SPRING DESIGN AND CUSTOMIZATION When your machine design calls for an industrial gas spring,
Mounting and operating instructions EB 5801 EN. Electric Actuators Type 5801 (Rotary Actuator) Type 5802 (Linear Actuator)
Electric Actuators Type 5801 (Rotary Actuator) Type 5802 (Linear Actuator) Linear Actuator with Type 3260 Control Valve Rotary actuator with lever system Linear actuator with Type 3321 (V2001) Control
AIR CYLINDER Series A12, A13
A12 - Non magnetic A13 - Magnetic S Double Acting ( Ø32-100 ) mm As per ISO 6431 / CETOP RP43P, RP53P standards Features Adjustable cushioning at both ends Wide varieties of mountings Low friction Long
compact magnetic cylinders
CATALOGUE > Release 8.7 > Series 32 cylinders Series 32 compact magnetic cylinders Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 2287»» Compact design»»
bar -20 C C ( C for high temperature version) 1000 mm
Technical details Cylinders > piston rod cylinders > ISO 15552, double acting Operating pressure Temperature range Max. stroke Medium Materials 1... 10 bar -20 C... +80 C ( 0... +150 C for high temperature
AIR CYLINDER Series A23, A24
A23 - Magnetic A24 - Non-magnetic Double Acting s (Square type) Ø32-125 mm As per ISO 15552 / VDMA 24562 standards. Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings
ALROSE. british gas springs. IN STOCK items can be supplied next working day
IN STOCK items can be supplied next working day ALROSE british gas springs MARINELINE GAS SPRINGS BRACKETS END FITTINGS For the Maritime and Offshore Industry QUICK TURNAROUND COMPETITIVE PRICES FRIENDLY
KPP-143. Operating Instructions. Type. Serial Number
KPP-43 Operating Instructions Type Serial Number Date KPP-43 09/203 Operating Instructions King pin Introduction The air assisted and manual King Pin Press is a safe, professional, and time-efficient tool
Bore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2
6 S E R I E S Cylinders Series 6 Catalog 2006 Single, double acting, magnetic (DIN/ISO 643) Bore: ø 32, 40, 50, 63, 80, 00, 25 cushioned [ /4, 9/6, 2, 2 /2, 3 /8, 4, 5 inch approximations] The Series 6
Guide blocks for ISO/VDMA cylinders
Actuators Guide blocks or ISO/VDMA cylinders QA/8/51/ QA/8/61/ QA/8/81/ (long coupling) QA/8/85/ (short coupling) Ø 32 to 1 mm QA/8/61/ QA/8/51/ Conorms to ISO 6431, VDMA 24562 and NFE 49 3 1 Ensures protection
Stainless steel Cylinders Series 90
90 S E R I E S Catalogue 200 Stainless steel Cylinders Series 90 DIN/ISO 643 Single and double-acting (magnetic) ø 32, 40, 50, 63, 80, 00 and 25 cushioned Stainless steel cylinders Series 90 ø 32, 40,
Aluminium profile. Double-acting, cushioned, magnetic ø mm
> Series 4 cylinders Series 4 cylinders - Aluminium profile Double-acting, cushioned, magnetic ø 60-200 mm»» In compliance with ISO 643/ VDMA 24562 standards»» Rolled stainless steel rod»» Adjustable pneumatic
Shock absorbers in miniature format Rod Button. Slot
8 Miniature Shock Absorbers MC5 to MC75 Miniature Shock Absorbers Shock absorbers in miniature format Rod Button Ideal for compact, effi cient designs: The MC5 to 75 series impresses users with their reduced
Stainless Steel Cylinders, ISO 6432, Bore 10-25mm - P1S
This range of stainless steel cylinders has been specially designed for use in difficult environments. Hygienic design, external seals of flourianted rubber and prelubrication with our food-industry-approved
ASP Series Steel Body NFPA Cylinder Line
Series Steel Body NFPA Cylinder Line www.numatics.com Table of Contents Series Features and Benefits 3 Standard Mounts 4 How to Order 5 Port Size Availability 6 Dimensions 7-34 Rod Ends 7 Large Bore 8
Round Body Minicylinders, DIN/ISO 6432 Series 16, 24 and 25
Round Body Minicylinders, DIN/ISO 6432 Series 16, 24 and 25 Series 16: ø 8-10 - 12 bumpers Series 24: ø 16-20 - 25 bumpers and magnetic piston Series 25: ø 16-20 - 25 adjustable cushion and magnetic piston»»
ISO CYLINDERS Ø ACTUATORS
ISO 15552 CYLINDERS Ø 250-320 1 Cylinders made to ISO 15552 available in various versions and with a wide range of accessories: double-acting single-or through-rod with or without cushioning configuration
Tie-rod Cylinders, ISO 6431, ISO compliant Series 60
Tie-rod Cylinders, ISO 6431, ISO 15552 compliant Series 60 Single or double-acting, magnetic, cushioned Standard and low friction versions ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with ISO 15552
Chapter 10: Valves for Pipe Mounting
Contents Chapter : Valves for Pipe Mounting Series Description Size Body Page DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 1¼ 1½ 2 L-port T-port Pressure valves, manual operation R4V R4R Pressure relief function Pressure
Miniature Shock Absorbers
1 Automation Control Tuning for almost any design Miniature shock absorbers from ACE are tried-and-tested quality products used in millions of industrial construction designs throughout the world. They
Series 31 compact cylinders 1/
Series 3 compact cylinders Double and single-acting, double-acting non-rotating, magnetic ø2, 6, 20, 25 mm ø 32, 40, 50, 63, 80, 00 mm UNITOP The compact dimensions allow Series 3 single and double-acting
T F
T 0134 151 F 0134 445 www.kentgassprings.com A FLEIBLE APPROACH TO GAS SPRINGS STANDARD GAS SPRINGS BESPOKE GAS SPRINGS STEEL or STAINLESS STEEL SHORT PRODUCTION TIMES SMALL or LARGE QUANTITIES GAS SPRING
antriebstechnik ELA Electromechanical Linear Actuator
D antriebstechnik ELA Electromechanical Linear Actuator Electromechanical Linear Actuators ELA Electromechanical Linear Actuators (ELA) consist of trapezoidal or ball screws driven by an electric motor
Aluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm
> Series 62 cylinders CATALOGUE > Release 8.6 Series 62 cylinders - Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the
Proportional Pressure Reducing Valve PDM08130
Proportional Pressure Reducing Valve PDM08130 up to 80 bar up to 10 l/min Cartridge valves Control electronics Connection housings 486 1. DESCRIPTION 1.1. GENERAL According to DIN-ISO 1219, HYDAC proportional
TRUNNION MOUNTED BALL VALVES API 6D & API 6A. Side_Entry Ball Valve SE type
TRUNNION MOUNTED BALL VALVES API 6D & API 6A Side_Entry Ball Valve SE type Stem Stem Seals Body / Closure Gasket Ball Seat Seat Seal Side_Entry Ball Valve SE type TECHNICAL DESCRIPTION Description: ON/OFF
Level Limit Switch liquiphant FTL 360 / FTL 361
Technical Information TI 184F/00/en evel imit Switch liquiphant FT 360 / FT 361 evel limit switch iquiphant II with vibrating probe. For all types of liquid. iquiphant level limit switch: FT 360, compact
Eye End Fittings to Gas Springs Page 6-11-A
Eye End Fittings to Gas Springs Page 6-11-A Stainless Steel Eyes M5 x 08 Stainless Steel Eyes M6 x 1 Stainless Steel Eyes M8 x 1.25 Stainless Steel Eyes M8 x 1.25 Stainless Steel Eyes M10 x 1.5 Stainless
Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.8 > Series 60 cylinders Series 60 cylinders Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 00, 25mm»»
Aluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40%
CATALOGUE > Release 8.7 > Series 6 cylinders Series 6 cylinders - Aluminium profile Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40,
Cylinders Series 61 - Aluminium profile
CATALOGUE > Release 8. Cylinders Series 6 - Aluminium profile MOVEMENT > Cylinders Series 6 Single, double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00, 25 (ISO 5552)» ISO 5552 (corresponding to
Die changing technique
Die changing Die changing 8 Contents Product group 8 Roller bar, hydraulically lifted for heavy loads (400 bar), lifting of the complete roller bar for medium loads (120 bar), lifting of individual rollers
Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.6 > Series 60 cylinders Series 60 cylinders New version Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 00,
Single-acting and double-acting, magnetic Series 94: ø 16, 20, 25 mm Series 95: ø 25 mm, cushioned
> Series 94 and 95 stainless steel cylinders CATALOGUE > Release 8.7 Series 94 and 95 stainless steel mini-cylinders Single-acting and double-acting, magnetic Series 94: ø 6, 20, 25 mm Series 95: ø 25
Single- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 100 and 125 mm
> Series 90 stainless steel cylinders CATALOGUE > Release 8.8 Series 90 stainless steel cylinders Single- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 00 and 25 mm» In compliance with ISO
STC Air Cylinders. Fine Quality. Precision Engineered. Advanced Design. Excellent Prices. Air Cylinders
Catalog: PUB 06 CYL STC Advanced Design Precision Engineered Fine Quality Excellent Prices connects fluid power to industrial automation F1 Table of Contents STC Air Cylinder Numbering System............F2
HYDRAULIC PISTON ACCUMULATORS
HYDRAULIC PISTON ACCUMULATORS WWW.SERVI.NO Product development and production at Servi Cylindersservice' top modern facilities in Rissa. 2 2 SERVI GROUP Ever since 1912, Servi Group has been a key player
MSRP: $12,699. For 2014, the V-Strom 1000 ABS is available in Candy Daring Red and Glass Desert Khaki
MSRP: $12,699 The new 2014 balances size, weight, power and maneuverability in such a way you find yourself in a zone where time just disappears. The journey of life seems seamless with the. Conquer city
Aluminium tube and profile
> Series 63 cylinders CATALOGUE > 206 Series 63 cylinders - Aluminium tube and profile New Single and double-acting, magnetic, cushioned Versions: standard, low friction, high and low temperatures ø 32,
FULL COLOR TAB #6 TC 105
FULL COLOR TAB #6 TC 105 SERIES TC 2-STAGE TELESCOPING CYLINDER CONSTRUCTION FEATURES 3 Bore Sizes: 0.75, 1.50 and 2.50 Strokes up to 60 2-Stage Telescoping Space Saving Design 100% Double Action Heavy-Duty
PL-2 Series Medium-Duty Industrial Hydraulic Cylinders BPL-2 PH-2 PH-3 PHX
PL- Series Medium-Duty Industrial Hydraulic Cylinders PHX PH- PL- PH- Contents Features... Specifications / Mountings... Design Features and enefits... - Mounting Information, " to " ore Sizes... 8- Mounting
Operation and Maintenance Instructions
Hydratight Limited Bentley Road South Darlaston West Midlands WS10 8LQ United Kingdom Tel: +44 121 50 50 600 Fax: +44 121 50 50 800 E-mail: enquiry@hydratight.com Website: www.hydratight.com HNOFC062490400
HYDROKOMP. Clamping Systems. Technology that connects. precise durable varied. Brand name products by Hydrokomp
HYDROKOMP Clamping Systems precise durable varied Brand name products by Hydrokomp Technology that connects HYDROKOMP GmbH Siemensstraße 16, 35325 Mücke (Germany) Phone: +49 6401 225999-0 Fax: +49 6401
INTEGRATED HYDRAULIC BRAKE ACTUATORS
INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE The integrated hydraulic brake is comprised of a pneumatic cylinder that acts as an actuator and an oleo-dynamic circuit
Directional Seat Valve Series D4S (Denison)
Characteristics Seat valves series D4S are designed for directional control functions. A large variety of poppets, springs and covers - including shuttle valves, stroke limiters, solenoid valves (VV01)
Series 16: ø 8, 10, 12 mm Series 24: ø 16, 20, 25 mm - magnetic Series 25: 16, 20, 25 mm - magnetic, cushioned
> Series 6, 24 and 25 mini-cylinders Series 6, 24 and 25 mini-cylinders Series 6: ø 8, 0, 2 mm Series 24: ø 6, 20, 25 mm - magnetic Series 25: 6, 20, 25 mm - magnetic, cushioned» Single-acting and double-acting»
Single and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm
> Series 97 stainless steel cylinders CATALOGUE > Release 8.7 Series 97 stainless steel cylinders Single and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm»» Clean design»» Stainless steel AISI
Series 16 Gas Springs. Lift, support, damping and adjustment devices
Series 16 Gas Springs Lift, support, damping and adjustment devices Gas Springs: Series 16 For nearly 50 years, SUSPA has offered a proven, time-tested, highperformance gas spring line: SERIES 16. Conforming
AIR CYLINDER Series A25, A26
A25 - Magnetic A26 - Non-magnetic S Double End Double Acting - Ø32-100 mm As per ISO 15552 / VDMA 24562 standards Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings.
Extruded Body Cylinders, ISO 6431, ISO compliant Series 61
1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 61 Single or double-acting, magnetic, cushioned Standard and
PNEUMATIC CYLINDERS CYLINDERS ISO solutions SERIES 21 SERIES 21 CYLINDERS ISO 15552
PNEUMATIC CYLINDERS 1 2 3 4 SERIEs 21- General Information 32-100 mm diameter 21 series cylinders are manufactured to ISO 15552 standard which specifies interchangeable mounting dimensions. The cylinder
Double-acting, magnetic, guided ø 10x2, 16x2, 20x2, 25x2, 32x2 mm
CATALOGUE > Release 8.8 > Series QX twin rod cylinders Series QX twin cylinders Double-acting, magnetic, guided ø 0x2, 6x2, 20x2, 25x2, 32x2 mm High force Precise movement Integrated guide QXB: linear
Double acting, cushioned, magnetic Ø mm
CATALOGUE > Release 8.7 > Series 40 cylinders Series 40 cylinders Double acting, cushioned, magnetic 60-200 - 250-320 mm In compliance with ISO 5552 standards and with the previous DIN/ISO 643 - VDMA 24562
MagSpring. Courtesy of Steven Engineering, Inc. - (800)
468 www.linmot.com M01-20 472 M01-37 474 Accessories 476 www..com 469 products can best be described as "magnetic springs." The term "spring", however, is to be understood to mean that components generate
2/2-way, 3/2-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 and G1/8 - cartridge ø4
CATALOGUE > Release 8.5 > Directly operated solenoid valves Series A Directly operated solenoid valves Series A /-way, 3/-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 and G1/8 -
Series 32 compact magnetic cylinders 1/ Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 100 mm
Series 32 compact magnetic cylinders Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 2287»» Compact design»» Wide range of models available in different
Our policy is one of continued research and development. We therefore reserve the right to amend,
Airmotor (Oscillator) with integrated switches Double acting Ø 50... 100 mm Complete functional unit for oscillating movement Conforms to ISO 6431 and VDMA 24562 Integrated 5/2 valve Frequency and speed
LPRA/182000/M Double acting profile cylinders Ø mm
Double acting profile cylinders 32... 125 mm High performance, stability and reliability M/50 switches (solid state) can be mounted flush with the profile Cylinders and mountings conform to ISO 15552 (ISO
PMFO AIR/OIL SYSTEM PMFO AIR-OIL PROGRESSIVE MODULAR LUBRICATING SYSTEMS
AIR/OIL SYSTEM AIR-OIL PROGRESSIVE MODULAR LUBRICATING SYSTEMS (BLUE COLOUR ALUMINIUM BASE) The basic design of this system is similar to the PMF progressive, but with the inclusion of airways to enable
For single and double operated actuators. Exhaust air recirculation (3/2 way function)
For single and double operated actuators /-, 5/- and 5/ Directional Control Valves Actuation: Electromagnetic Indirectly controlled soft seal spool valves Connection G /4 or /4 NPT NAMUR interface Exhaust
Innovation in. Mechanical Motion & Vibration Controls
Innovation in Mechanical Motion & Vibration Controls ACE Controls Inc. located in Farmington Hills, Michigan, is a leading innovator in deceleration, vibration and motion control technology. For over a
Eibach Pro-Damper Shocks & Struts (05-09 All):
Eibach Pro-Damper Shocks & Struts (05-09 All): Required tools: 3/8 and 1/2 drive ratchets 7, 8, 10, 15, 16, 17, 18, 21 & 22 mm open ended wrenches 8 & 10 mm box end wrenches 10mm socket 13, 15 & 18 mm
Active and Passive Brakes Series OSP-P
Active and Passive Brakes Series OSP-P Contents Description Page Overview 51-52 Standard cylinder with Active brake 53-56 Plain bearing SLIDELINE with Active brake 33-34 Aluminium roller guide PROLINE
P1A Pneumatic Mini ISO Cylinders
P1A Pneumatic Mini ISO Cylinders According to ISO 6432 The P1A range of cylinders is intended for use in a wide range of applications. The cylinders are particularly suitable for lighter duties in the
Chapter 6: Check Valves
Contents Chapter : Check Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 0 10 1 25 32 Subplate Screw-in Slip-in Shuttle valves SSR -2 Check valves, direct operated
ENERPAC HYDRAULIC PRODUCTS
ENERPAC Enerpac features the most comprehensive family of high-force products, distributed globally yet supported locally, to make you more productive and the work you do safer and easier to perform. Decades
Oil Dampers with Fixings on Both Ends
amping Engineering Oil ampers with Fixings on Both Ends Oil ampers with Fixings on Both Ends Oil dampers with fixings on both ends are used when moving objects may not exceed a certain speed e.g. flaps,
Series 20 D. Pressure switches for all-fluid technique Port sizes G 1 /4 and G 1 /2
Series 0 D Pressure switches for all-fluid technique Port sizes and Microswitch with gold-plated contacts (silver plated for outdoor variants) Plug-in connection to DIN 4650 Technical Data Fluid: Neutral
Miniature Shock Absorbers MC5 to MC75
Miniature Shock Absorbers MC to MC7 1 ACE miniature shock absorbers are maintenance-free, self-contained hydraulic components. The model range MC to MC7 have a very short overall length and a low return
97105 Inline. Ordering information. Technical data. Accessories See page 5
75 Inline /-, 5/- and 5/ directional valves Actuation: electromagnetic Indirectly controlled soft seal spool valves G /, / NPT, G /, / NPT For single and double operated actuators Crossover-free switching,
Magnetic cylinders Series 27 1/ Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm
CATALOGUE > Release 8.5 > Cylinders Series 27 Magnetic cylinders Series 27 Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm»» Reduced dimensions»» Different mounting options»» Perfect alignment, perfect
12/95 N Our policy is one of continued research and development. We therefore reserve the right
Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic, Double Acting 32 to 125 mm Cylinders to VDMA Standard 24562, ISO 6431 and NFE 49-003-1 New polyurethane seals ensure
The most complete range of European market
The most complete range of European market 3 HIGH LEVEL SERVICE Our staff and our customers have made possible our growth in recent years. We continually strive to improve our service and our ability to
Active and Passive Brakes Series OSP-P
Active and Passive Brakes Series OSP-P Contents Description Data Sheet No. Page Overview P-1.42.001E 69-70 Standard cylinder with Active brake P-1.42.002E 71-74 Plain bearing SLIDELINE with Active brake
Large Bore Extruded Cylinders, ISO 6431 Series 41
Large Bore Extruded Cylinders, ISO 6431 Series 41 Double-acting cushioned, magnetic ø160-200 (DIN/ISO 6431)»» DIN/ISO 6431 VDMA 24562»» Rolled stainless steel rod»» Adjustable cushioning Cylinders Series
Power consumption Wire/transformer sizing. Motor. Spring return. Motor. Spring return. EMC Low voltage directive
Technical data sheet NFU Damper actuator for operating air control dampers in ventilation and air-conditioning systems for building services installations Torque: 10Nm Nominal voltage: AC 4... 40V DC 4...15V
CPLab / CP Factory. Application module magazine. Data sheets
CPLab / CP Factory Application module magazine Data sheets Data sheet: Push-in fitting QSM-M5-4 #153304 Size Mini Nominal size 2.2 mm Type of seal on screw-in stud Sealing ring Container size 10 Design
Axial Piston Variable Pump A2VK
Axial Piston Variable Pump A2VK RE 94001/06.10 1/12 Replaces: 07.04 Data sheet Size 12 to 107 Series 1 and 4 Nominal pressure 250 bar Maximum pressure 315 bar Version for pumping plastic components Contents
ROLLERS UCK T TR PALLE
PALLET TRUCK ROLLERS 6 km/h 80-85 320-800 74 VULKOLLAN ROLLERS WITH STEEL CENTRE 400-1000 -20 / +80 180-450 6 km/h 80-85 320-800 75 TR POLYURETHANE ROLLERS WITH STEEL CENTRE 400-1000 -20 / +80 150-400
Chapter 6: Check Valves
Contents Chapter : Check Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 0 10 1 25 32 Subplate Screw-in Slip-in SSR RK / RB CS SPZBE SPV / SPZ C4V CPS C4V D4S
BEST IN SPARE PARTS VOLVO AND RENAULT TRUCKS BEST IN SPARE PARTS TOP MOVERS REPLACEMENT PARTS TO FIT GERMAN ENGINEERING SINCE 1947
BEST BEST IN SPARE PARTS IN SPARE PARTS REPLACEMENT PARTS TO FIT VOLVO AND RENAULT TRUCKS TOP MOVERS GERMAN ENGINEERING SINCE 1947 This brochure shows you a small selection of the PE replacement parts
RA/8000, RA/8000/M. Pneumatic cylinders ISO 6431, VDMA and NFE Non-magnetic and magnetic piston Double acting Ø 32 to 320 mm
Pneumatic cylinders ISO 6431, VDMA 456 and NFE 49-003-1 Non-magnetic and magnetic piston Double acting Ø 3 to 30 mm Comprehensive range for the utmost versatility Conforms to DIN ISO 6431, VDMA 456 and