Traction Gas Springs GZ-15 to GZ-40 (Pull Type)
|
|
- Gordon Houston
- 5 years ago
- Views:
Transcription
1 Traction Gas Springs GZ- to GZ-40 (Pull ) Industrial traction gas springs are maintenance-free and ready to install. They are available ex-stock with body diameters from to 40 and forces from N to 000 N with valve. ACE traction gas springs offer a long service life due to the hard-chromed piston rod and integral sliding bearing. They can be installed in any position. The traction force can be subsequently adjusted by means of the valve. The comprehensive range of fitting parts ensures easy installation and makes the traction gas springs universal in use. They supply the muscle force and enable the controlled raising and lowering of covers, hoods, flaps etc. With the free ACE calculation service, the traction gas springs are designed with mounting points to fit the individual application, and can be delivered ex-stock as express deliveries within 24 hours. Filled with High Pressure Nitrogen Gas Piston with Seals Outer Body Seals Piston Rod Main Bearing Gas Valve Function: ACE industrial traction gas springs are maintenance-free, closed systems, which are filled with pressurised nitrogen gas. Compared to the push type, ACE traction gas springs work in the reverse way. The piston rod is by the gas pressure in the cylinder. The surface of the piston ring between the piston rod and the inner tube determines the force of the gas spring. Traction gas springs are always mounted with the stroke fully compressed. Operating fluid: Nitrogen gas Mounting: In any position Operating temperature range: - C to 0 C On request: Special force curves, special lengths, alternative seals and end fittings.
2 Industrial Traction Gas Springs GZ- (Pull ) Traction (Pull) Forces 0 N to 0 N (when Piston Rod Extended up to 30 N) NEW.1 4 thick A3, Eye A3, 4 thick Ø4.1 R4 4 Ø..3 Traction Force F 1 0 N Swivel Eye E3, E3, Ø B3, M3.x0. Stud Thread B3, C3, Ø13 GZ-- Angle Ball Joint C3, GZ GZ GZ--0 0 GZ--0 0 GZ--0 0 GZ--0 0 M4x0. GZ Clevis Fork D3, D3, GZ--0-AC-0 (Pull ) Body Ø ( ) (0 ) Piston Rod A Body C see page Ø13 Ball Socket G3, G3, 4 U3, See page 3. GZ- see page 199. fittings, rod shroud. End position damping length: Without damping Progression: approx. 23 %, F 2 max. 30 N Available traction force range F 1 at C: 0 N to 0 N Note: ifetime approx. 00 m Controls International Unit 404 Easter Park Haydock ane Haydock WA11 9TH Tel. +44-(0) Fax +44-(0) info@ace-controls.co.uk 9 9
3 Industrial Traction Gas Springs GZ-19 (Pull ) Traction (Pull) Forces N to 0 N (when Piston Rod Extended up to 3 N) A.1 Ø thick thick.1 Eye A max. force 00 N R Ø Ø 19 B C D E G Ø Ø 13. Mx Ø 3 Ø Mx1.2 Ø Ø13 GZ-19-1 GZ GZ GZ GZ GZ (Pull ) Body Ø (19 ) (0 ) Piston Rod A Body C Traction Force F 1 20 N GZ-19-0-AC-20 see page Stud Thread B Angle Ball Joint C max. force 00 N Clevis Fork D max. force 00 N Swivel Eye E max. force 00 N Ball Socket G max. force 00 N W-19 Ø 13 Ø 23 Adjustment 24 to 34 See page for ength Adaptor. = + UZ See page 3. GZ see page 0. End position damping length: Without damping. Progression: Approx. %, F 2 max. 3 N Available traction force range F 1 at C: N to 0 N Note: ifetime approx. 00 m 190 Controls International Unit 404 Easter Park Haydock ane Haydock WA11 9TH Tel. +44-(0) Fax +44-(0) info@ace-controls.co.uk
4 Industrial Traction Gas Springs GZ-2 (Pull ) Traction (Pull) Forces 0 N to 00 N (when Piston Rod Extended up to 40 N) A.1 Ø thick thick.1 Eye A R9 1 Ø Ø 2 1 B C D E 9 Mx1. Ø 40 2 Ø 24 Ø Ø Ø 43 3 Mx1. Ø 19 GZ-2-1 GZ GZ GZ GZ GZ GZ GZ GZ GZ GZ GZ GZ GZ (Pull ) Body Ø (2 ) (0 ) Piston Rod E Body E Traction Force F 1 00 N GZ-2-0-EE-00 see page Stud Thread B Angle Ball Joint C max. force 00 N Clevis Fork D Swivel Eye E W-2 Ø 32 = + 40 Adjustment 24 to 34 See page for ength Adaptor. UZ See page 3. GZ-2 see page 0. End position damping length: Without damping. Progression: Approx. %, F 2 max. 40 N Available traction force range F 1 at C: 0 N to 00 N Note: ifetime approx. 00 m Controls International Unit 404 Easter Park Haydock ane Haydock WA11 9TH Tel. +44-(0) Fax +44-(0) info@ace-controls.co.uk
5 Industrial Traction Gas Springs GZ-40 (Pull ) Traction (Pull) Forces 400 N to 000 N (when Piston Rod Extended up to 000 N) NEW A Ø.1 Ø 2 thick thick Ø.1 Eye A R. 21 Ø B C D E 19 2 Mx1. Ø 2 40 Ø Ø 22 2 Ø Ø Mx1. Ø 2 GZ GZ GZ GZ GZ GZ GZ GZ (Pull ) Body Ø (40 ) (0 ) Piston Rod E Body E Traction Force F 1 00 N GZ-40-0-EE-00 see page Stud Thread B Angle Ball Joint C max. force 30 N Clevis Fork D Swivel Eye E W-40 = UZ See page 3. GZ-40 see page 1. End position damping length: Without damping Progression: approx. 40%, F 2 max. 000 N Available traction force range F 1 at C: 400 N to 000 N Note: ifetime approx. 00 m 192 Controls International Unit 404 Easter Park Haydock ane Haydock WA11 9TH Tel. +44-(0) Fax +44-(0) info@ace-controls.co.uk
Stainless Steel Traction Gas Springs (Pull Type)
Stainless Steel Traction Gas Springs (Pull ) Stainless steel industrial traction gas springs Material 1.41/1.45, AISI 4/3 (V2A) Material 1.4404/1.4571, AISI 3/3Ti (V4A) In addition to the comprehensive
More informationIndustrial Gas Springs
Industrial Gas Springs Function, Calculation and Mounting Tips Gas springs are universally accepted, wherever you want to push pull lift lower, or position covers, lids or other components by hand without
More informationIndustrial Gas Springs Pull Type
4 Motion Control Industrial Gas Springs Pull Type Takes over when things get too tight for gas pressure springs If ACE gas push type springs cannot be used due to a lack of space, ACE s industrial gas
More informationLooking for a gas spring replacement...
Welcome to... ooking for a gas spring replacement... For over 40 years ACE has been successfully manufacturing and supplying a wide range of motion control products. Industrial gas springs have always
More informationStainless Steel Industrial Gas Springs (Push Type)
Stainless Steel Industrial Gas Springs (Push ) Stainless steel gas springs (push type) Material 1.1/1., AISI /3 (V2A), Material 1.0/1.71, AISI 31/31Ti (VA) In addition to the comprehensive range of industrial
More informationPull Type Gas Springs
Pull Type Gas Springs ICTATOR pull type gas springs are the answer to your problems if you are unable to use normal push type gas springs due to a lack of space. They work in the opposite way to push type
More informationPush Type Gas Springs
Push Type Gas Springs ICTATOR high-performance push type gas springs make life easier by lifting loads smoothly and effortlessly. We have a vast product range with many potential applications. We manufacture
More informationEye End Fittings to Gas Springs Page 6-11-A
Eye End Fittings to Gas Springs Page 6-11-A Stainless Steel Eyes M5 x 08 Stainless Steel Eyes M6 x 1 Stainless Steel Eyes M8 x 1.25 Stainless Steel Eyes M8 x 1.25 Stainless Steel Eyes M10 x 1.5 Stainless
More informationIndustrial Shock Absorbers MC 33 to MC 64
Industrial Shock Absorbers MC 33 to MC 64 Self-Compensating 36 This range of self-compensating shock absorbers is part of the innovative MAGNUM Series from ACE. You profit from the enhanced product life
More informationAir-Oil Systems, Inc. Gas Springs AGS 15 - AGS 28
Gas Springs GS 15 - GS 28 Gas Springs ontrols gas springs are reliable units designed to handle the demanding needs of the industrial and commercial markets. They are maintenance free and self-contained.
More informationGas Springs AGS 15 - AGS 28
Gas Springs GS 15 - GS 28 Gas Springs ontrols gas springs are reliable units designed to handle the demanding needs of the industrial and commercial markets. They are maintenance free and self-contained.
More informationThe most complete range of European market
The most complete range of European market 3 HIGH LEVEL SERVICE Our staff and our customers have made possible our growth in recent years. We continually strive to improve our service and our ability to
More informationOil Dampers with Fixings on Both Ends
amping Engineering Oil ampers with Fixings on Both Ends Oil ampers with Fixings on Both Ends Oil dampers with fixings on both ends are used when moving objects may not exceed a certain speed e.g. flaps,
More informationcompact magnetic cylinders
CATALOGUE > Release 8.7 > Series 32 cylinders Series 32 compact magnetic cylinders Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 2287»» Compact design»»
More informationStainless steel gas springs with stainless steel hand operated blocking valve. Allows the Gas spring to be stopped in any position by turning wheel.
Blocking Gas Springs Series 10-23 and 10-28 with valve Page 6-10 Stainless steel gas springs with stainless steel hand operated blocking valve. Allows the Gas spring to be stopped in any position by turning
More informationDICTATOR Final Dampers
DICTATOR DICTATOR final dampers are needed to slow down all kinds of rotative or linear movement. Their relatively long strokes offer sufficient saftey distances. The final dampers are available in both
More informationStainless steel Cylinders Series 90
90 S E R I E S Catalogue 200 Stainless steel Cylinders Series 90 DIN/ISO 643 Single and double-acting (magnetic) ø 32, 40, 50, 63, 80, 00 and 25 cushioned Stainless steel cylinders Series 90 ø 32, 40,
More informationMiniature Shock Absorbers MC5 to MC75
Miniature Shock Absorbers MC to MC7 ACE miniature shock absorbers are maintenance-free, self-contained hydraulic components. The model range MC to MC7 have a very short overall length and a low return
More informationWorking in Energy. Ace Controls International Unit 404 Easter Park Haydock Lane Haydock WA11 9TH United Kingdom
Working in Energy Ace Controls International Unit 404 Easter Park Haydock Lane Haydock WA11 9TH United Kingdom Telephone: +44 (0)1942 727440 Facsimile: +44 (0)1942 717273 Email: info@ace-controls.co.uk
More informationShock Absorber Accessories M5 to M25
Shock Absorber Accessories M to M 34 Selection Chart for Shock Absorber Accessories 1 Clamp Mount/ Universal Mount 2 Side Load Adaptor Shock Absorber Type KM AH MB RF UM BV Thread Size Mx0. MCEUM KM AH
More informationSeries 16 Gas Springs. Lift, support, damping and adjustment devices
Series 16 Gas Springs Lift, support, damping and adjustment devices Gas Springs: Series 16 For nearly 50 years, SUSPA has offered a proven, time-tested, highperformance gas spring line: SERIES 16. Conforming
More informationMiniature Shock Absorbers MC5 to MC75
Miniature Shock Absorbers MC to MC7 1 ACE miniature shock absorbers are maintenance-free, self-contained hydraulic components. The model range MC to MC7 have a very short overall length and a low return
More informationSingle and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.8 > Series 60 cylinders Series 60 cylinders Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 00, 25mm»»
More informationPneumatic cylinders series CX Double acting with magnetic piston, ISO 15552, stainless steel G1/8 to G1/2 piston Ø 32 to 100 mm
Pneumatic cylinders series CX Double acting with magnetic piston, ISO 15552, stainless steel 000 400 Order code CX-032-0250-000 Note: Piston Ø 125, 160 and 200 on request. Series Piston Ø Stroke length
More informationAluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40%
CATALOGUE > Release 8.7 > Series 6 cylinders Series 6 cylinders - Aluminium profile Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40,
More informationTwin Master Combine. Transmission & Gear Boxes Section 8. 2 Speed Transmission Transmission Gear Shift
Twin Master Combine Transmission & Gear Boxes Section 2 Speed Transmission... 2-4 Transmission Gear Shift... 5-6 PTO Swivel Gear Box 107021... 7- Transition Auger Gear Box 107026... 9-10 Straw Chopper
More informationSingle and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.6 > Series 60 cylinders Series 60 cylinders New version Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 00,
More informationDamping Engineering. Types Functioning of the Dampers. Final Dampers Single and Bi-Directional. Oil Dampers with Fixings on Both Ends
Contents Damping Engineering Types Functioning of the Dampers Page 03.003.00 Final Dampers Single and Bi-Directional Page 03.009.00 Oil Dampers with Fixings on Both Ends Page 03.027.00 High-Performance
More informationTHE FULL RANGE OF NITRO GAS STRUTS AND FITTINGS
HE FULL RANGE OF NIRO GAS SRUS AND FIINGS INRODUCION Metrol Springs Ltd are specialists in the design, manufacture, and supply, of gas spring products. We offer the largest range of gas springs and struts
More informationLPRA/182000/M, ISO cylinder Magnetic piston, double acting
> > Ø 32... 125 mm > > High performance, stability and reliability > > M/50 switches can be mounted flush with the profile > > Cylinders and mountings conform to ISO 15552 (ISO 6431, VDM 24562 and NFE
More informationTube connection Ambient temperature range Medium temperature range. T min C +80. C T max. max. Weight (mass) kg See table
Cylinder Ø32-125 mm with blocking device Series DZB... Blocking reverse stroke Series DZBA... Blocking forward stroke Mountings to ISO 15552 (ISO 6431) Special versions: according to CETOP RP 53 P (Piston
More informationManual clamps Industrial standard
Manual clamps Industrial standard Modular clamps The modular clamp kit. In connection with a standard ISO cylinder and a clamp bracket, fully equipped pneumatic clamping points can be assembled with the
More informationSeries 16: ø 8, 10, 12 mm Series 24: ø 16, 20, 25 mm - magnetic Series 25: 16, 20, 25 mm - magnetic, cushioned
> Series 6, 24 and 25 mini-cylinders Series 6, 24 and 25 mini-cylinders Series 6: ø 8, 0, 2 mm Series 24: ø 6, 20, 25 mm - magnetic Series 25: 6, 20, 25 mm - magnetic, cushioned» Single-acting and double-acting»
More informationSingle and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm
> Series 97 stainless steel cylinders CATALOGUE > Release 8.7 Series 97 stainless steel cylinders Single and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm»» Clean design»» Stainless steel AISI
More informationBore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2
6 S E R I E S Cylinders Series 6 Catalog 2006 Single, double acting, magnetic (DIN/ISO 643) Bore: ø 32, 40, 50, 63, 80, 00, 25 cushioned [ /4, 9/6, 2, 2 /2, 3 /8, 4, 5 inch approximations] The Series 6
More informationSeries 32 compact magnetic cylinders 1/ Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 100 mm
Series 32 compact magnetic cylinders Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 2287»» Compact design»» Wide range of models available in different
More informationMagnetic cylinders Series 27 1/ Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm
CATALOGUE > Release 8.5 > Cylinders Series 27 Magnetic cylinders Series 27 Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm»» Reduced dimensions»» Different mounting options»» Perfect alignment, perfect
More informationAluminium profile. Double-acting, cushioned, magnetic ø mm
> Series 4 cylinders Series 4 cylinders - Aluminium profile Double-acting, cushioned, magnetic ø 60-200 mm»» In compliance with ISO 643/ VDMA 24562 standards»» Rolled stainless steel rod»» Adjustable pneumatic
More informationDUCATI MONSTER 696/796 CARTRIDGE KIT
DUCATI MONSTER 696/796 CARTRIDGE KIT INSTALLATION OF THE KYB CARTRIDGE KIT Available for models Ducati Monster 696 and 796 from 2011 to 2014 This manual concerns the installation of the aftermarket KYB
More informationGAS SPRINGS CONTENTS. 45 GGN Black Nitrate. 47 STS-316L Stainless Steel. 49 Dampers 50 End Fittings 50 Ball Studs & Clips 51 Brackets
GAS SPRINGS CONTENTS 45 GGN Black Nitrate Gas Springs 46 GGS Chrome-Plated Rod Gas Springs 47 STS-316L Stainless Steel Gas Spring 48 ECL-SafeLock Gas Springs 48 Self-Centering Dampers 49 Dampers 50 End
More informationAluminium tube and profile
> Series 63 cylinders CATALOGUE > 206 Series 63 cylinders - Aluminium tube and profile New Single and double-acting, magnetic, cushioned Versions: standard, low friction, high and low temperatures ø 32,
More informationAluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm
> Series 62 cylinders CATALOGUE > Release 8.6 Series 62 cylinders - Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the
More informationP: E: W: 1 of 20 MEG DS 034 A
McMillan Engineering Group designs and manufactures a complete range of standard and custom IHS Jacking Equipment to suit all of your construction needs. 1 of 20 MEG DS 034 A Index IHS Double Acting Cylinders...
More informationASSEMBLY SPARE PARTS LIST
ASSEMBLY SPARE PARTS LIST Conversion kit RT/5200 3 rd point hitch manual fold into RT/5200 3 rd point hitch hydraulic fold part no 230.197 Conversion kit RT/5200 3 rd pull type manual fold into RT/5200
More informationTie-rod Cylinders, ISO 6431, ISO compliant Series 60
Tie-rod Cylinders, ISO 6431, ISO 15552 compliant Series 60 Single or double-acting, magnetic, cushioned Standard and low friction versions ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with ISO 15552
More informationAIR OPERATED GREASE PUMPS AND KITS PUMPMASTER 3 20 PUMPMASTER PUMPMASTER 6 21 GREASE PUMP KITS 22 PUMP ACCESSORIES 23
AIR OPERATED GREASE PUMPS AND KITS PUMPMASTER 3 20 PUMPMASTER 3+3 20 PUMPMASTER 6 21 GREASE PUMP KITS 22 PUMP ACCESSORIES 23 404 100 / 407 200 / 409 200 PUMPMASTER 3 & 3+3 PUMPMASTER 3, 55:1 PRESSURE RATIO
More informationCylinders Series 61 - Aluminium profile
CATALOGUE > Release 8. Cylinders Series 6 - Aluminium profile MOVEMENT > Cylinders Series 6 Single, double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00, 25 (ISO 5552)» ISO 5552 (corresponding to
More informationBlock feeder SPVS Used in oil or grease lubrication systems
1-3029-EN Block feeder SPVS Used in oil or grease lubrication systems Block feeders of the SPVS series are used in grease and oil total loss lubrication systems. They are used to either increase the number
More informationSeries 6PF Positioning Feedback cylinders 1/ Double-acting low friction, magnetic ø 50, 63, 80, 100, 125 mm
CATALOGUE > Release 8.8 > Series 6PF cylinders Series 6PF Positioning Feedback cylinders Double-acting low friction, magnetic ø 50, 63, 80, 00, 25 mm»» In compliance with ISO 5552 standards and with the
More informationHydraulic Block Cylinder HBZ 500
Hydraulic Block Cylinder HBZ 500 Maximum operating pressure up to 500 bar with smallest installation dimensions Choice of 12 different piston sizes and 21 differnt configurations Seal arrangement for easy
More informationBlock feeder SPVS Used in oil or grease lubrication systems
1-3029-EN Block feeder SPVS Used in oil or grease lubrication systems Block feeders of the SPVS series are used in grease and oil total loss lubrication systems. They are used to either increase the number
More informationAIR CYLINDER Series A25, A26
A25 - Magnetic A26 - Non-magnetic S Double End Double Acting - Ø32-100 mm As per ISO 15552 / VDMA 24562 standards Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings.
More informationDouble and single-acting, double-acting non-rotating, magnetic ø12, 16, 20, 25 mm ø 32, 40, 50, 63, 80, 100 mm UNITOP
CATALOGUE > Release 8.7 > Series 3 cylinders Series 3 compact cylinders Double and single-acting, double-acting non-rotating, magnetic ø2, 6, 20, 25 mm ø 32, 40, 50, 63, 80, 00 mm UNITOP» Compact design»
More informationHeavy Industrial Shock Absorbers CA 2 to CA 4
Heavy Industrial Shock Absorbers CA 2 to CA 4 The CA 2 to CA 4 complete the ACE product range of self-compensating shock absorbers. With these units ACE has a continuous range of selfcompensating units
More informationSeries 31 compact cylinders 1/
Series 3 compact cylinders Double and single-acting, double-acting non-rotating, magnetic ø2, 6, 20, 25 mm ø 32, 40, 50, 63, 80, 00 mm UNITOP The compact dimensions allow Series 3 single and double-acting
More informationCONTENTS. 45 GGN Black Nitrate Gas Springs 46 GGS Chrome Plated Rod Gas Springs
45 GGN Black Nitrate Gas Springs 46 GGS Chrome Plated Rod Gas Springs 47 STS-316L Stainless Steel Gas Spring 48 ECL-SafeLock Gas Springs 48 Self-Centering Dampers CONTENTS 49 Dampers 50 End Fittings 50
More informationStainless Steel Gas Springs Page 6-0-1
316 QUALITY STAINLESS STEEL GAS SPRINGS PROGRAM Stainless Steel Gas Springs Page 6-0-1 ALL OUR GASSPRINGS ARE EXECUTED WITH VALVE AND NITRITE SEAL AND ARE PRODUCED UNDER LLOYDS CONTROLLED AND CERTIFIED
More informationISO PNEUMATIC CYLINDERS PAC-Y SERIES Ø32 - Ø125
ISO 15552 PNEUMATIC CYLINDERS PAC-Y SERIES Ø32 - Ø125 PAC-Y GENERAL INFORMATION PAC-Y SERIES ISO 15552-32 - 125 CUSHIONING CYLINDER ELOXAL PLATE AND SPECIAL ROD SEAL PROVIDING HYGIENE AND LONG WORKING
More informationFRONT SUSPENSION LOCATION INDEX
1. Remove the front suspension tower bar. (See FRONT SUSPENSION TOWER BAR REMOVAL/INSTALLATION.) 2007 Mazda MX-5 Miata Sport 2007 SUSPENSION Front Suspension - MX-5 Miata FRONT SUSPENSION LOCATION INDEX
More informationStainless Steel Cylinders, ISO 6432, Bore 10-25mm - P1S
This range of stainless steel cylinders has been specially designed for use in difficult environments. Hygienic design, external seals of flourianted rubber and prelubrication with our food-industry-approved
More informationT F
T 0134 151 F 0134 445 www.kentgassprings.com A FLEIBLE APPROACH TO GAS SPRINGS STANDARD GAS SPRINGS BESPOKE GAS SPRINGS STEEL or STAINLESS STEEL SHORT PRODUCTION TIMES SMALL or LARGE QUANTITIES GAS SPRING
More informationISO CYLINDERS Ø ACTUATORS
ISO 15552 CYLINDERS Ø 250-320 1 Cylinders made to ISO 15552 available in various versions and with a wide range of accessories: double-acting single-or through-rod with or without cushioning configuration
More informationCP3850 Series Grinders
1/11 1 Spring cylindrical 6156811670 1 1 1 1 1 X 2 Warning label 6158713860 1 1 1 1 1 X 3 CP plate 2050553403 1 1 1 1 1 X 4 Name plate 2050553413 1 1 1 1 1 X 5 Ring screw 6156731760 1 1 1 1 1 X 6 Autobalancer
More informationantriebstechnik ELA Electromechanical Linear Actuator
D antriebstechnik ELA Electromechanical Linear Actuator Electromechanical Linear Actuators ELA Electromechanical Linear Actuators (ELA) consist of trapezoidal or ball screws driven by an electric motor
More informationStandard Coilover Shock Range
Standard Coilover Shock Range NTR R1 14-40 Series COILOVER NTR R1-40 SERIES UNIQUE Technology Coilover NTR R1 14-40 Series Every Nitron shock is built using the ultimate in quality precision components,
More informationSingle-acting and double-acting, magnetic Series 94: ø 16, 20, 25 mm Series 95: ø 25 mm, cushioned
> Series 94 and 95 stainless steel cylinders CATALOGUE > Release 8.7 Series 94 and 95 stainless steel mini-cylinders Single-acting and double-acting, magnetic Series 94: ø 6, 20, 25 mm Series 95: ø 25
More informationEND FITTINGS 126. Clevis M6 LOCKABLE GAS Cat.no: S1130 SPRING 130. Clevis M8 Cat.no: S Ballcup M6, Ø 10 Cat.no:
LOCKABLE GAS SPRING General information STANDARD RANGE Our standard range of lockable gas springs comprises 70 different items that can be combined with a number of operating controls and end fittings.
More informationSeries 63 ISO cylinders
Series 63 ISO 15552 cylinders New versions Single and double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with the ISO 15552 standard Weight reduced by 25% Low noise More
More informationExtruded Body Cylinders, ISO 6431, ISO compliant Series 61
1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 61 Single or double-acting, magnetic, cushioned Standard and
More informationrev 8_ EK6101 PC-6114
1 Fuel Tank, Handle 1 14 13 12 15 22 2 3 4 11 6 10 23 16 8 174 7 24 25 28 USA CDN 180 26 31 29 21 30 20 32 9 33 33 17 19 18 2 1 Fuel Tank, Handle 1 1 315-114-640 FUEL TANK CPL. BLUE 1 MAKITA 1 1 315-114-601
More informationZ125 Front Fork Upgrade kits. Installation SOP
Z125 Front Fork Upgrade kits Installation SOP Tools a. Loctite243 or Loctite2701 (Thread Locker) b. Loctite7649 (Activator) c. 33mm Hex Socket d. 17mm Hex Socket e. Shaft Clamping Tool (12mm) f. Shaft
More informationStandard Cylinder Series SZ 100
Standard Cylinder Series SZ 100 Maximum operating pressure up to 100 bar Choice of 13 different piston sizes between 12 und 200mm and 23 different attachments Rugged yet compact design with good guiding
More informationMetric Impact Sockets
INGERSO-RND IMPC SOCKES Metric Impact Sockets Sockets Features Genuine Ingersoll Rand Impact sockets are built of top quality materials for performance and durability. Specifically designed for use with
More informationAccessories for Sliding Doors
Accessories for Sliding Doors DICTATOR provides various accessories for sliding lift doors. There are - bi-directional hydraulic ZDH dampers - Standard Haushahn door damper - spring rope pulleys - plastic
More informationDouble acting, cushioned, magnetic Ø mm
CATALOGUE > Release 8.7 > Series 40 cylinders Series 40 cylinders Double acting, cushioned, magnetic 60-200 - 250-320 mm In compliance with ISO 5552 standards and with the previous DIN/ISO 643 - VDMA 24562
More informationINTEGRATED HYDRAULIC BRAKE
INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE The integrated hydraulic brake is comprised of a pneumatic cylinder that acts as an actuator and an oleo-dynamic circuit that acts as a brake. The
More information2013 Vulcan 1700 Vaquero ABS
2013 Vulcan 1700 Vaquero ABS Sporty Flowing Designed Bagger Loaded with Top-End Tools While its muscular curvature is based on that of the Vulcan 1700 Voyager ABS, the Vulcan 1700 Vaquero ABS is much more
More informationElectric Lifting Cylinder TV / KV 5 XE Load up to N
S+R S+R automation systems GmbH Electric Lifting Cylinder TV / KV 5 XE Load up to 6.500 N Lifting Moving Positioning Design and functuion An electric lifting cylinder is an electro-mechanical drive unit.
More informationUSE AN ENGINEERED APPROACH TO TAILOR A PERFECT STANDARD GAS SPRING FOR YOUR DESIGN A GUIDE TO GAS SPRING DESIGN AND CUSTOMIZATION WH ITE PA P E R
WH ITE PA P E R USE AN ENGINEERED APPROACH TO TAILOR A PERFECT STANDARD GAS SPRING FOR YOUR DESIGN A GUIDE TO GAS SPRING DESIGN AND CUSTOMIZATION When your machine design calls for an industrial gas spring,
More informationMINING & DRILLING PRODUCTS. B Core Retrieval System
MINING & DRILLING PRODUCTS B Core Retrieval System CORE BARREL ASSEMBLY, B -0-00 Core Barrel Assembly, 0 ft (.0 m) -0-00 Core Barrel Assembly, ft (. m) -0-00 Inner Tube Assembly, 0 ft (.0 m) -0-00 Inner
More informationrev 1_ XML02
1 DECK, MOTOR, BLADE 2 1 DECK, MOTOR, BLADE 1 1 273675-0 GRIP A 1 1 2 266459-3 TAPPING SCREW 5X25 2 1 3 453250-0 LOCK LEVER 1 1 4 453251-8 LOCK LEVER SUPPORT 1 1 5 233173-6 COMPRESSION SPRING 4 1 1 6 144077-6
More informationY08521 September 2014
Y0852 September 204 Contents How To Use The Illustrated Parts List... 3 FRONT BEARING COVER ASSY.... 4 FRONT CASE ASSY... 5 INPUT SHAFT ASSY... 7 INTERMEDIATE CASE ASSY... 8 LAYSHAFT ASSY.... 0 LRC ASSEMBLY...
More informationALROSE. british gas springs. IN STOCK items can be supplied next working day
IN STOCK items can be supplied next working day ALROSE british gas springs MARINELINE GAS SPRINGS BRACKETS END FITTINGS For the Maritime and Offshore Industry QUICK TURNAROUND COMPETITIVE PRICES FRIENDLY
More informationEibach Pro-Damper Shocks & Struts (05-09 All):
Eibach Pro-Damper Shocks & Struts (05-09 All): Required tools: 3/8 and 1/2 drive ratchets 7, 8, 10, 15, 16, 17, 18, 21 & 22 mm open ended wrenches 8 & 10 mm box end wrenches 10mm socket 13, 15 & 18 mm
More informationFor double-acting actuators. Crossover-free switching. Safety function in the event of power failure provided by mechanical return spring
For double-acting actuators 5/ Directional Control Valves Actuation: Electromagnetic Indirect solenoid operation soft seal spool valve Connections G 1/, 1/ NPT, G 1/, NAMUR Interface Crossover-free switching
More informationShock absorbers in miniature format Rod Button. Slot
8 Miniature Shock Absorbers MC5 to MC75 Miniature Shock Absorbers Shock absorbers in miniature format Rod Button Ideal for compact, effi cient designs: The MC5 to 75 series impresses users with their reduced
More informationSafety Shock Absorbers SCS300 and 650
s SCS300 and 650 60 The safety shock absorber series SCS300 to 650 are based on the innovative technology of the SC² series by ACE. y combining the piston and inner tube, an energy capacity up to 525 m
More informationLarge Bore Extruded Cylinders, ISO 6431 Series 41
Large Bore Extruded Cylinders, ISO 6431 Series 41 Double-acting cushioned, magnetic ø160-200 (DIN/ISO 6431)»» DIN/ISO 6431 VDMA 24562»» Rolled stainless steel rod»» Adjustable cushioning Cylinders Series
More informationrev 3_ EK6101 PC-6114
1 Fuel Tank, Handle 1 14 13 12 15 22 2 3 4 11 6 10 174 16 23 8 7 24 25 28 USA CDN 180 26 31 29 21 30 20 32 9 33 33 17 19 18 2 1 Fuel Tank, Handle Products with multiple versions are listed in subsiding
More informationCP3850 Series Grinders
1/11 1 Spring cylindrical 6156811670 1 1 1 1 1 1 1 X 2 Warning label 6158713860 1 1 1 1 1 1 1 X 3 CP plate 2050553403 1 1 1 1 1 1 1 X 4 Name plate 2050553413 1 1 1 1 1 1 1 X 5 Ring screw 6156731760 1 1
More information6000W Generator. 6000W Generator. 6000W Generator. 6000W Generator. Cylinder barrel. Cylinder head system assy. Description. APA Part No.
Cylinder head system assy. Cylinder barrel A APA Part No. B APGG000-A-0-JD HEAD COVER COMP. APGG000-B-0-JD (MX ) APGG000-A-0-JD HEAD COVER WASHER COMP. APGG000-B-0-JD OIL LEVEL SWITCH ASSY. APGG000-A-0-JD
More informationMiniature Shock Absorbers
1 Automation Control Tuning for almost any design Miniature shock absorbers from ACE are tried-and-tested quality products used in millions of industrial construction designs throughout the world. They
More informationOwners manual. Öhlins Superbike front fork FG 170
Owners manual Öhlins Superbike front fork FG 0 Including: Setting up your fork Changing springs and seals Service the fork Trouble shooting Technical info Spare parts & tools Öhlins super bike front fork
More informationOur policy is one of continued research and development. We therefore reserve the right to amend,
Airmotor (Oscillator) with integrated switches Double acting Ø 50... 100 mm Complete functional unit for oscillating movement Conforms to ISO 6431 and VDMA 24562 Integrated 5/2 valve Frequency and speed
More informationLT Spare parts list. Rammer. Valid from serial number. LT mm, (11 in.) 2015 Construction Tools EOOD No
LT 8005 Spare parts list Rammer LT 8005 280 mm, (11 in.) LT 8005 330 mm, (11 in.) Valid from serial number BGF000001 BGF000001 2015 Construction Tools EOOD No. 9800 1735 01 2015-12-11 LT 8005 Spare parts
More informationHeavy Industrial Shock Absorbers
80 Automation ontrol Heavy Industrial Shock Absorbers ffective shock absorption for heavy loads The heavy industrial shock absorbers from A round off the top of the company s offers in damping technology.
More informationStandard Norm Cylinder DIN 24554
Standard Norm Cylinder DIN 24554 Maximum operating pressure up to 160 bar Choice of 10 different piston sizes between 25 and 200mm with 2 different rod diameters and 4 different attachments each Rugged,
More informationList of parts for SAB 128 Mk 4
List of parts for SAB 28 Mk 4 Pos. Compressor complete, HF 46-6 Compressor komplete, HM 46-7 Compressor housing 0 Rotor housing, SAB 28 30-052 Bearing cover at suction end 20 Suction cover for SAB 28 303-39
More informationTwin Rod Non Rotate Cylinders RDV and AZ
Twin Rod Non Rotate Cylinders RDV and AZ A range of twin rod cylinders designed for use in non rotate applications specifially suited to the handling and packaging environments. Offering a range of double
More informationshroud manipulator for ContinUous Casting Plants
shroud manipulator for ContinUous Casting Plants en - shroud Manipulator for ContinUous Casting Plants The Shroud Manipulator is built to achieve an easy handling of the shroud. It enables the user to
More information