Stainless steel gas springs with stainless steel hand operated blocking valve. Allows the Gas spring to be stopped in any position by turning wheel.

Size: px

Start display at page:

Download "Stainless steel gas springs with stainless steel hand operated blocking valve. Allows the Gas spring to be stopped in any position by turning wheel."

Arron Stewart
5 years ago
Views:

Blocking Gas Springs Series 10-23 and 10-28 with valve Page 6-10 Stainless steel gas springs with stainless steel hand operated blocking valve.

120 (Series 10-23-200) and #63.125 (Series 10-23-250) Parts of set include: Gas spring; protection tube, blocking lever set.

Picture: Stainless steel knob lever set assembly Blocking gas sping and standard gas spring installed side by side for blocking gas springs

143 END FITTINGS: #62.827 Eye M8x27 ;10 mm thick #62.830 Balljoint M8x30 # 62.536 Ball Swivel End M8x36 #62.

825L Eye M8x25; end 5 mm thick Series Blocking Total length 62.819 62.827 62.

5 mm Short Eyes: add 2 x 19 mm Long Eyes: add 2 x 27 mm Ball Joints: add 2 x 30 mm Rod thread size Cylinder Thread size Newton Force 10-23-200

5 mm 726.5 mm 742.5 mm 748.5 mm M10x1 M8x1.25 500N Compressed 250 mm 438.5 mm 476.5 mm 492.5 mm 498.5 mm M10x1 M8x1.25 500N Max / min.

1 Blocking Gas Springs Series and with valve Page 6-10 Stainless steel gas springs with stainless steel hand operated blocking valve. Allows the Gas spring to be stopped in any position by turning wheel. Blocking Gas Spring Set as complete assembly: # (Series ) and # (Series ) Parts of set include: Gas spring; protection tube, blocking lever set. Please order endfittings separate. Picture: Stainless steel knob lever set assembly Blocking gas sping and standard gas spring installed side by side for blocking gas springs Operation: Turn knob lever from blocking position to not blocking position: 1/2 turn with click Part number Blocking Knob Lever separate: # END FITTINGS: # Eye M8x27 ;10 mm thick # Balljoint M8x30 # Ball Swivel End M8x36 # Fork with pin M8x32 Other eye end fittings: # Eye M8x19; end 10 mm thick #62.825L Eye M8x25; end 5 mm thick Series Blocking Total length Stainless steel gas spring with valve Stroke without attachments (not counting the thread) 2 x stroke mm Short Eyes: add 2 x 19 mm Long Eyes: add 2 x 27 mm Ball Joints: add 2 x 30 mm Rod thread size Cylinder Thread size Newton Force Extended 200 mm mm mm mm mm M10x1 M8x N Compressed 200 mm mm mm mm mm M10x1 M8x N Extended 250 mm mm mm mm mm M10x1 M8x N Compressed 250 mm mm mm mm mm M10x1 M8x N Max / min. charge in Newton force 500N to 150N / 110lb. to 33 lb. The use of a blocking gas springs allows hatches to be opened and locked in any position. Maximum weight hatch using one blocking gas spring: 100 lbs./ 45 kg / 450 N For applications using two gas springs, with one standard and with one blocking gas spring the maximum weight of the hatch is 300 lbs. Please Sales@Izerwaren.com for details. IZERWAREN INC. Tel.: Fax.: for Exceptional European Hardware

2 Eye End Fittings to Gas Springs Page 6-11-A Stainless Steel Eyes M5 x 08 Stainless Steel Eyes M6 x 1 Stainless Steel Eyes M8 x 1.25 Stainless Steel Eyes M8 x 1.25 Stainless Steel Eyes M10 x 1.5 Stainless Steel Eyes M14 x 1.5 Note: All Eye End Fittings are supplied in standard mill finish. Eye end fittings with part numbers ending with L are made of 316 stainless steel. Otherwise they are made of 304 stainless steel. IZERWAREN.COM. Tel.: Fax.: for Exceptional European Hardware

Endfittings to Gas Springs Page 6-11-B Stainless Steel Ball joints, swivel 18 degrees; ball can be separated from cup after removing circlip M5 to M5 M5 to ball M6 M6 to M6

135 Ball joints OD For Overall length Thread Distance size ball For gas spring Order numbers diameter size hole (b) To ball (h) ø series 62.522 10 mm 5.1 mm 28 mm M5 x 0.

1 mm 39 mm M6 x 1 M8 x 1.25 30 mm 13 mm Not applicable 62.830 14 mm 8.1 mm 39 mm M8 x 1.25 30 mm 13 mm 8-19 and 10-23 62.135 18 mm 10.1 mm 47 mm M10 x 1.

Swivels 12 degrees to either side OD diameter size hole Ø Overall length Thread Distance For gas spring series 62.527 9 / 11 mm 5.1 mm 36 mm M5 x 0.80 27 mm 6-15 62.536 12.

1 mm 76 mm M14 x 15 57 mm 22-38 Forks with Pin Order number Stainless Steel Fork with Pin.

3 Endfittings to Gas Springs Page 6-11-B Stainless Steel Ball joints, swivel 18 degrees; ball can be separated from cup after removing circlip M5 to M5 M5 to ball M6 M6 to M6 M6 to Ball M8 M8 to M8 M10 x M10 # # # # # # Ball joints OD For Overall length Thread Distance size ball For gas spring Order numbers diameter size hole (b) To ball (h) ø series mm 5.1 mm 28 mm M5 x mm 8 mm mm 6.1 mm 28 mm M5 x 0.8 M6 x 1 22 mm 8 mm mm 5.1 mm 32 mm M6 x 1 25 mm 10 mm Not applicable mm 8.1 mm 39 mm M6 x 1 M8 x mm 13 mm Not applicable mm 8.1 mm 39 mm M8 x mm 13 mm 8-19 and mm 10.1 mm 47 mm M10 x mm 16 mm Swivel Ends Order numbers Stainless Steel Swivel Ball Ends. Swivels 12 degrees to either side OD diameter size hole Ø Overall length Thread Distance For gas spring series / 11 mm 5.1 mm 36 mm M5 x mm / 16 mm 8.1 mm 48 mm M8 x mm 8-19 and /19 mm 10.1 mm 58 mm M10x mm / 25 mm 14.1 mm 76 mm M14 x mm Forks with Pin Order number Stainless Steel Fork with Pin. Pin can be removed from fork after removing circlip D3 diameter pin diameter L1 Overall length L2 Length to pin A= square dimension Circlip size For gas spring series mm 5 mm 26 mm 20 mm 10x10 mm mm 8 mm 42 mm 33 mm 16x16 mm and mm 10 mm 52 mm 40 mm 20x20 mm mm 14 mm 72 mm 56 mm 27x27 mm Note: All parts listed above are available from stock. Please see for other eye-endfittings page 6-11-A IZERWAREN INC. Tel.: Fax.: for Exceptional European Hardware

Izerwaren order numbers Gas Springs Brackets Stainless Steel Page 6-14 64.088 64.

Cast stainless steel 1 1/2 x 2 3/8 footprint; 3/4 stand off #64.

098 for M10 Showing M8 ball joint #62.830 to be ordered separately 64.205 64.

205 Bracket for eyes When using M10 ball joints order: #64.

258 for ball joints M8 for ball joints M10 for eyes M8 for eyes M10 Cast stainless steel 1

257 using M8 ball joints using M8 eye Cast stainless steel 1 7/8 x 2 7/8 footprint; 3/4

250 for ball joints M5 Cast stainless steel, polished 2 x 7/8 footprint 3/4 stand off 64.

4 Izerwaren order numbers Gas Springs Brackets Stainless Steel Page Hatch mounting bracket for ball joints M8 Hatch mounting bracket for ball joints M10 Cast stainless steel 1 1/2 x 2 3/8 footprint; 3/4 stand off # Hatch mounting bracket: 1 1/2 x 2 3/8 footprint 3/4 stand off # for M10 Showing M8 ball joint # to be ordered separately Hatch mounting bracket for Eyes M8 Hatch mounting bracket for Eyes M10 # Bracket for eyes When using M10 ball joints order: # using M8 or M10 eyes ball joints and eyes sold separately for ball joints M8 for ball joints M10 for eyes M8 for eyes M10 Cast stainless steel 1 7/8 x 2 7/8 footprint; 3/4 stand off # # using M8 ball joints using M8 eye Cast stainless steel 1 7/8 x 2 7/8 footprint; 3/4 stand off ball joints and eyes sold separately for ball joints M5 Cast stainless steel, polished 2 x 7/8 footprint 3/4 stand off Hatch mounting bracket for ball joints M5 Cast stainless steel, polished 2 3/8 x 3/4 footprint # # Hatch mounting bracket M5 eye 2 x 7/8 footprint 3/4 stand off 2 3/8 x 3/4 footprint ball joints and eyes sold separately IZERWAREN.COM Tel.: Fax.: for Exceptional European Hardware

Part # 64.582H5 64.5825 64.582H8 64.8825 Angle Bracket with 5.

1 mm hole Angle Bracket with ball joint M8 Gas Springs Brackets - Stainless Steel Page 6-15 MEDIUM DUTY GAS SPRING

1 mm hole Offset Bracket with ball joint M5 Offset Bracket with 8.1 mm hole Offset Bracket with ball joint M8 #64.

582H8 with hole for M8 Mounting bracket with 90 degree angle 2 wide x 1 1/2" high x 1 1/4" deep. 5/32 thick.

584H5 with hole for M5 #64.5845 with ball joint M5 #64.584H8 with hole for M8 Mounting bracket with offset 3/16.

8835 Flush Bracket with 5.1 mm hole Flush Bracket with ball joint M5 Flush Bracket with 8.

583H8 with hole for M8 Mounting bracket flush. 2 wide x 1 5/8" high. 5/32 thick.

5 mm thick or 5/32 316 stainless steel 64.088 64.089 64.205 64.206 64.255 64.256 64.257 64.

3/8 footprint; 3/4 stand off Hatch mounting bracket for Eyes M8 Hatch mounting bracket for Eyes M10 for ball joints M8

5 Part # H H Angle Bracket with 5.1 mm hole Angle Bracket with ball joint M5 Angle Bracket with 8.1 mm hole Angle Bracket with ball joint M8 Gas Springs Brackets - Stainless Steel Page 6-15 MEDIUM DUTY GAS SPRING BRACKETS H H With M8 ball joint. With M5 ball joint Offset Bracket with 5.1 mm hole Offset Bracket with ball joint M5 Offset Bracket with 8.1 mm hole Offset Bracket with ball joint M8 #64.582H5 with hole for M5 # with ball joint M5 #64.582H8 with hole for M8 Mounting bracket with 90 degree angle 2 wide x 1 1/2" high x 1 1/4" deep. 5/32 thick. 316 stainless steel. Mounting bracket with offset 3/ mm thick or 5/ stainless steel #64.584H5 with hole for M5 # with ball joint M5 #64.584H8 with hole for M8 Mounting bracket with offset 3/16. 2 wide x 1 7/8" high. 2.5 mm thick or 5/32 thick. 316 stainless steel H H Flush Bracket with 5.1 mm hole Flush Bracket with ball joint M5 Flush Bracket with 8.1 mm hole Flush Bracket with ball joint M8 #64.583H5 with hole for M5 # with ball joint M5 #64.583H8 with hole for M8 Mounting bracket flush. 2 wide x 1 5/8" high. 5/32 thick. 316 stainless steel HEAVY DUTY GAS SPRING BRACKETS SEE ALSO PAGE 6-14 Mounting bracket flush 2.5 mm thick or 5/ stainless steel Hatch mounting bracket for ball joints M8 Hatch mounting bracket for ball joints M10 Cast stainless steel 1 1/2 x 2 3/8 footprint; 3/4 stand off Hatch mounting bracket for Eyes M8 Hatch mounting bracket for Eyes M10 for ball joints M8 for ball joints M10 for eyes M8 for eyes M10 Cast stainless steel 1 7/8 x 2 7/8 footprint; 3/4 stand off # Hatch mounting bracket # Bracket for eyes # Hatch mounting bracket for M8 ball joints for M8 or M10 eyes For M10 ball joints BALL JOINTS AND EYES SOLD SEPARATELY SEE PAGES 6-11-A AND 6-11-B # # using M8 ball joints using M8 eye # BALL JOINTS AND EYES SOLD SEPARATELY SEE PAGES 6-11-A AND 6-11-B IZERWAREN INC. Tel.: Fax.: for Exceptional European Hardware

Part # Gas Springs Brackets - Stainless Steel Page 6-15-1 MEDIUM DUTY GAS SPRING BRACKETS for Eyes

306; U shaped 316 stainless steel bracket with pin for M8 eye end fittings.

1 3/4 x 5/8 ; mounting: 1/2" high. MEDIUM DUTY GAS SPRING BRACKETS for Forks M8 Small Footprint #64.

833 and M8 swivel-end #62.538 Bracket size: 45 x 23 mm; Mounting: 19 mm high.

CLG; 150 x 50 mm; 55 mm high; 5 7/8 x 2 ; 2 3/16 high. #64.CSM 75 x 50 mm; 55 mm high.

Can also be used for Door Closer Gas Springs for Weather Doors. 65.D125 #65.

HEAVY DUTY For use on weather doors on yachts and ships with a weight op to 300 lbs.

6 Part # Gas Springs Brackets - Stainless Steel Page MEDIUM DUTY GAS SPRING BRACKETS for Eyes M8 Small Footprint #64.306; U shaped 316 stainless steel bracket with pin for M8 eye end fittings. Shown with eye end fitting# Bracket size: 45 x 16 mm; mounting: 13 mm high. 1 3/4 x 5/8 ; mounting: 1/2" high. MEDIUM DUTY GAS SPRING BRACKETS for Forks M8 Small Footprint #64.303; U shaped 316 stainless steel bracket with bolt. Shown with M8 forks # and M8 swivel-end # Bracket size: 45 x 23 mm; Mounting: 19 mm high. 1 3/4" x 15/16 ; mounting: 3/4" high HEAVY DUTY BRACKETS f CLG 64.CSM #64.CLG; 150 x 50 mm; 55 mm high; 5 7/8 x 2 ; 2 3/16 high. #64.CSM 75 x 50 mm; 55 mm high. 3 x2 ; 2 3/16 high. Heavy duty brackets. Can also be used for Door Closer Gas Springs for Weather Doors. 65.D125 #65.D125 DOOR CLOSER GAS SPRING. HEAVY DUTY For use on weather doors on yachts and ships with a weight op to 300 lbs. * Stainless steel Door closer gas spring # * with stainless steel swivel eyes M 10 * Stroke: 250 mm overall. * Length not counting threads, without end fittings: 700 mm * Center to Center distance end fitting: 790 mm * Please note stainless steel protection tube over rod. * This door closer has a controlled extension speed * Recommended Force setting: 500N * Force range: 150 to 500 Newton Set up with swivel ends # and # brackets Possible set up of the 65.D125 door closer gas spring, using one bracket # and one bracket #64.CLG IZERWAREN.COM Tel.: Fax.: for Exceptional European Hardware

Charging Kit & Bleeding Gage for Gas Springs Page 6-17-0 Part Number: #63.000 Charging Kit includes plywood box Part Number: #63.

BEFORE YOU REED THE INSTRUCTIONS ON THE NEXT PAGE: IT IS POSSIBLE TO BLOW THE O RINGS FROM THE CHARGING NIPPLES IF THEY ARE UNSCREWED FROM THE GAS SPRING BEFORE THE PRESSURE IS RELEASED FROM

2- Then open the bleeding valve, making sure all pressure is released.

Charging Kit.. It is not an accurate tool for releasing small amounts of gas from a gas spring. For that, one needs a Bleeding Gas Kit no.63.001. SAFETY AROUND NITROGEN GAS.

7 Charging Kit & Bleeding Gage for Gas Springs Page Part Number: # Charging Kit includes plywood box Part Number: # Bleeding Gage Kit with Case Descriptions on page IMPORTANT INFORMATION FOR OPERATING THE CHARGING KIT. BEFORE YOU REED THE INSTRUCTIONS ON THE NEXT PAGE: IT IS POSSIBLE TO BLOW THE O RINGS FROM THE CHARGING NIPPLES IF THEY ARE UNSCREWED FROM THE GAS SPRING BEFORE THE PRESSURE IS RELEASED FROM THE CHARGING HOSE. ALWAYS RELEASE THE PRESSURE FROM THE CHARGING THIN HIGH PRESSURE HOSE FIRST!! Procedure: 1- After charging the gas spring, close the charging valve. 2- Then open the bleeding valve, making sure all pressure is released.. 3- Then unscrew the nipple from the gas spring BLEEDING NIPPLES These can be used for quickly and conveniently releasing nitrogen gas from the gas spring, before recharging it with the Charging Kit.. It is not an accurate tool for releasing small amounts of gas from a gas spring. For that, one needs a Bleeding Gas Kit no SAFETY AROUND NITROGEN GAS. Nitrogen is an inert gas, the does not burn. However, released quickly is big amounts in a closed in environment, it can deprive one from oxygen and can suffocate as a result. ALWAYS have safety instructions handy posted and memorized! Izerwaren does not assume any responsibility for the use and misuse of this charging kit, and is not liable for injury or monetary damages as a result of using this charging kit. IZERWAREN.COM Tel.: Fax.: for Exceptional European Hardware

Operating a charging kit takes place under full responsibility of the end user. No claim can be placed towards Izerwaren Inc.

If only parts of the kit are sold, Izerwaren takes no responsibility for any injury, or damage occurred as a result from use or misuse of the parts sold or equipment charged.

PLACE THE CHARGING NIPPLE LOOSELY ON THE CYLINDER SIDE OF THE GAS SPRING. 3. ALLOW A LOW PRESSURE FLOW OF GAS THROUGH THE LINE. THE NIPPLE WILL SEAL ITSELF BY MEANS OF AN INNER VALVE SEAT. 4.

8 Operating a charging kit takes place under full responsibility of the end user. No claim can be placed towards Izerwaren Inc. for injury or damage occurring from operating a charging kit from Izerwaren Inc. If only parts of the kit are sold, Izerwaren takes no responsibility for any injury, or damage occurred as a result from use or misuse of the parts sold or equipment charged. Charging Kit & Bleeding Gage for Gas Springs Page INSTRUCTIONS HOW TO USE THE CHARGING NIPPLES with CHARGING KIT and BLEEDING KIT. 1. NEVER USE FORCE. 2. PLACE THE CHARGING NIPPLE LOOSELY ON THE CYLINDER SIDE OF THE GAS SPRING. 3. ALLOW A LOW PRESSURE FLOW OF GAS THROUGH THE LINE. THE NIPPLE WILL SEAL ITSELF BY MEANS OF AN INNER VALVE SEAT. 4. IF NO SEALING OCCURS, TURN THE NIPPLE SLIGHTLY BACK AND FORTH, BUT NEVER TIGHT ON THE GAS SPRING, AS THIS WILL RUPTURE THE RUBBER SEAL. THEN APPLY CHARGING FORCE REQUIRED. A FEW EXTRA RUBBER SEALS ARE ENCLOSED. 5. DO NOT BEND THE LINE. THE LINE IS RATED FOR 300 BAR OR 4000 PSI. 6. BEFORE REMOVING THE NIPPLE, RELEASE THE PRESSURE BY MEANS OF A RELIEF VALVE. OPEN THE RELIEVE VALVE COMPLETELY AND QUICKLY. 7. NEVER ALLOW MORE THEN 2200 PSI PRESSURE IN THE BLOCKING GAS SPRING SERIES 10-23: LOOK UP AT THE CHARGE TABLE UNDER 10 MM Ø ROD; WHICH IS THE 7TH COLUMN FROM THE LEFT: 1200 NEWTON EQUALS 2216 PSI. FOR OTHER SIZES ALWAYS FIND THE ROD DIAMETER FIRST. NEVER OVERCHARGE THE VARIOUS GAS SPRINGS. SEE CHART FOR MAX. PRESSURE OF GAS SPRING OF EACH TYPE. THE SEAL WILL RUPTURE IN CASE OF OVERCHARGING. NO WARRANTEE ON GAS SPRINGS THAT ARE NOT CHARGED BY US. 8. GAGES ON THE GAS BOTTLE NEED TO BE CALIBRATED FOR THE RIGHT PRESSURE READING. 9. YOUR HIGH PRESSURE LINE IS EQUIPPED WITH A 1/4" PIPE THREAD CONVERTER FROM M NIPPLES PROVIDED: M5, M8, M10, M ALWAYS USE TEF GEL ON THE THREADED ENDS ON THE GAS SPRING BEFORE FINAL INSTALLATION OF EYES OR BALLJOINTS. Charts for converting Psi / Lbs. / Kg / Newton force for each gas spring series are included. Please see for maximum Psi/Bar pressure for each gas springs series pages 6-18 and IZERWAREN.COM Tel.: Fax.: for Exceptional European Hardware

316 QUALITY STAINLESS STEEL GAS SPRINGS PROGRAM Stainless Steel Gas

NITRITE SEAL AND ARE PRODUCED UNDER LLOYDS CONTROLLED AND CERTIFIED

SPRINGS WITH PROTECTION TUBE made from 316 STAINLESS STEEL WITH VALVE

See page 6-8-1 COMPRESSION GAS SPRINGS, BLOCKING TYPE CAN BE MANUALLY

Page 6-10 BLEEDING VALVES AND CHARGING KITS ENDFITTINGS See pages 6-11-

6-14 and page 6-15 For technical information please call our office or

9 316 QUALITY STAINLESS STEEL GAS SPRINGS PROGRAM Stainless Steel Gas Springs Page ALL OUR GASSPRINGS ARE EXECUTED WITH VALVE AND NITRITE SEAL AND ARE PRODUCED UNDER LLOYDS CONTROLLED AND CERTIFIED CONDITIONS COMPRESSION GAS SPRINGS 316 STAINLESS STEEL WITH VALVE AND NITRITE SEAL. ALSO AVAILABLE IN CARBON STEEL See page 6-5 to 6-9 COMPRESSION GAS SPRINGS WITH PROTECTION TUBE made from 316 STAINLESS STEEL WITH VALVE COMPRESSION GAS SPRINGS WITH LOCKING DEVISE LOCKS IN EXTENDED POSITION See page COMPRESSION GAS SPRINGS, BLOCKING TYPE CAN BE MANUALLY LOCKED IN ANY POSITION. Page 6-10 BLEEDING VALVES AND CHARGING KITS ENDFITTINGS See pages A and 6-11-B ALLOWS CONTROLLED BLEEDING AND FILLING UP OF IZERWAREN GAS SPRINGS. See page 6-13 page STAINLESS STEEL BRACKETS AND END-FITTINGS See page 6-14 and page 6-15 For technical information please call our office or visit our showroom: Office and Show room: 2207 South Andrews Avenue, Fort Lauderdale, Florida Web site: and sales@izerwaren.com IZERWAREN INC. Tel.: Fax.: for Exceptional European Hardware

Eye End Fittings to Gas Springs Page 6-11-A

Eye End Fittings to Gas Springs Page 6-11-A Stainless Steel Eyes M5 x 08 Stainless Steel Eyes M6 x 1 Stainless Steel Eyes M8 x 1.25 Stainless Steel Eyes M8 x 1.25 Stainless Steel Eyes M10 x 1.5 Stainless