FO, FL, G Series. Variable Stroke Straight Line Action Clamps Product Overview. FL Series. G Series. FO Series. Type of Mounting: Through hole mount
|
|
- Shauna Gilbert
- 5 years ago
- Views:
Transcription
1 FO, FL, G Series Variable Stroke Straight Line Action Clamps Product Overview FO Series Type of Mounting: Foot Type of Actuation: Hand wheel or hand lever (one-handed operation) Locking lever and Plunger (two-handed operation) FL Series Type of Mounting: Flange Type of Actuation: Locking lever or hand wheel (one-handed operation) Locking lever and Plunger (two-handed operation) G Series Type of Mounting: Through hole Type of Actuation: Locking lever and Plunger (two-handed operation) Hand wheel or hand lever (one-handed operation) Technical Information Click Page # View Model Holding Capacity Max. [lbs] N Page MC- VSC-# Accessories Model Page MC- VSC-# Flanged base Front flange FO-02- FO-0 FO-1-45 FO-2-45 FO-160 FO FO FO-2 FO FL-0 FL-1-45 FL-2-45 FL-160 FL FL [] 00 [675] 000 [675] 000 [675] 000 [] 9000 [] 9000 [] 9000 [45] 00 [45] 00 [675] 000 [] 9000 Plunger /0 /0 /00 16/0 16/0 16/00 16/0 16/500 22/0 22/0 22/00 Swivel thrust pad K50 K6 K16 K Threaded G-02- G-0 [] 00 [675] 000 G-1-45 G-2-45 [675] 000 Model Holding Capacity Max. [lbs] N Page MC- VSC-# F-160 [4,0] 00 MC-VSC-1
2 FO, FL, G Series Variable Stroke Straight Line Action Clamps Operation Two-hand operation (the and the hand lever are operated separately) One-hand operation (the and handle lever/hand wheel are operated simultaneously) rapid stroke clamping stroke DESTACO s variable traight Line clamps are used in applications where workpiece thicknesses and workpiece tolerances vary. These clamps are suitable for clamping between ribs and hollow spaces difficult to reach. Compact design and different types of operation allow for application of the Straight Line clamps in fixtures for mass production as well as for single part production. s Foot base (FO Series) Flange (FL Series) Through hole (G Series) Type of operation Two hand operation The hand lever () and the (1) are separate. The hand lever is connected to the clamping mechanism. The can be removed from the clamp One-hand operation The hand lever () or the hand wheel () and the (2) are linked. The is retained within the clamp. Clamping operation The (1) or (2) which is guided within the clamp body contacts the workpiece. By rotating the hand lever () or the hand wheel () clock-wise the clamping stroke, S1 is engaged and the is tightly gripped by the slotted clamping sleeve (). Operating principle The hand lever s () clock-wise rotation causes the threaded sleeve () and the conical sleeve (4) to which it is connected to move in the direction of the arrow shown in the drawing. The conical sleeve produces a force-locking connection between the slotted clamping sleeve () and the by means of the ball bearings (5) located at the clamping sleeve s perimeter. Due to the force-locking connection, the rotates and produces the clamping 1. The s rotation may be compensated for by means of a swivel hold-down piece. The clamping strokes S1 specified in this catalog were measured with no opposing forces present while measurements were taken. When clamping this product against a workpiece, the clamping 1 is reduced by the force-locking connection between the and the workpiece. The straight-action clamp is unlocked by turning the hand lever or the hand wheel counter-clockwise. This method is used for both the one-hand and the two-hand operation types. This counter-clockwise rotation makes the conical sleeve (4) and the threaded sleeve () or (9) move backward. The pressure spring (7) pushes back the relieved ball bearings (5) via the pressure ring (6). The force-locking connection between the slotted clamping sleeve and the can be moved freely again. Straight Line clamps which are two-hand operated can also be applied to pull actions when the is inserted in the clamp s housing in the opposite direction. On the one hand operated clamp, the rotation inducing the clamping 1 is directly transmitted from the (2) or the hand wheel to the threaded sleeve (9) via a groovespring connection. The clamping and unclamping operations are executed in the same way as described before. Handling To change the position of the handle while in the clamped or the unclamped position, pull the hand lever off its spline () and set it in the desired position. Important The holding forces specified in the catalog refer to the maximum load exerted on the clamp by counter-forces. For details concerning the clamping force FS exerted on the workpiece by the clamp and depending on the operation force FB (manual force), please see the chart on the next page. The clamping force is proportional to the operation force. The achieved clamping force must not exceed the maximum holding force. As the Straight Line clamps, with the exception of the F-160 model, are designed only for axial load, we recommend to use an additional radial support for the in the event of side load. MC-VSC-2
3 FO, FL, G Series Variable Stroke Straight Line Action Clamps Technical Information Model FO-161/60 on a milling machine Different Designs Model FL-160 with 16/0 on a punching fixture FO Series : flange base foot Operating method: one-hand or two-hand operation FL Series : front flange Operating method: one-hand or two-hand operation G Series : through hole Operating method: one-hand or two-hand operation Foot Flange Through hole Two-hand operation Plunger and hand lever Operating method Model Max. holding One-hand operation Hand lever One-hand operation Hand wheel capacity 1) Plunger order separately; see page MC-VSG-5 [lbs.] N FO-02- [] 00 FB [lbs.] N Clamping force FS with an operating force FB Rapid stroke Weight FS [lbs.] N S [mm] S1 [mm] [lbs] Kg [0] 450 2,5 [0.72] 0,25 FO-0 1) [675] 000 [425] , 0, 00 [1.19] 0,5 FO-1-45 [675] 000 [425] [1.47] 0,665 FO-2-45 [675] 000 [0] 450 [1.4] 0,6 FO-160 1) [] 9000 [560] , 0, 00 4 [2.7] 1,2 FO [] 9000 [560] [.] 1,5 FO [] 9000 [190] [.] 1,40 FO-2 1) [45] 00 [675] 000 0, 0, 00 4 [5.5] 2,655 FO [45] 00 [675] [7.46],5 [22] FL-0 1) [675] 000 [425] , 0, 00 [1.07] 0,45 0 FL-1-45 [675] 000 [425] [1.4] 0,6 FL-2-45 [675] 000 [0] 450 [1.21] 0,550 FL-160 1) [] 9000 [560] , 0, 00 4 [2.49] 1, FL [] 9000 [560] [.] 1,40 FL [] 9000 [190] [2.92] 1,25 G-02- [] 00 [0] 450 2,5 [0.66] 0,00 G-0 1) [675] 000 [425] , 0, 00 [1.01] G-1-45 [675] 000 [425] [1.1] 0,595 G-2-45 [675] 000 [0] 450 [1.1] 0, Max. clamping stroke MC-VSC-
4 Two-hand operation (the and the hand lever are operated separately) FO, FL, G Series Variable Stroke Straight Line Action Clamps Technical Information Dimensions Through hole Flange Foot *without counter-force effect rapid clamping stroke* G-1/45 Accessories (order separately) Plunger Important The Straight Line clamps are designed only for axial load. In case of side load, we recommend an additional radial support of the. Foot FL-0/-- FL-160/-- without Available rapid strokes S (order separately) FO-0/-- FO-160/-- FO-2/-- A A1 A2 A Ø length For rapid Weight [lbs.] kg For clamps /0 0 [0.0] 0,1 FO-0 /0 0 [0.62] 0, FL-0 /00 00 [0.2] 0,70 G-0 16/0 0 [0.] 0,0 FO /0 0 [1.] 0,500 FL /00* 00 [1.54] 0,700 22/0 0 [2.] 1,000 22/0 0 [2.] 1,090 FO-2 22/00 00 [.06] 1,90 *0 and 500 mm lengths available upon request. A4 A B B1 B2 Dh D1 D2 D D4 FO-0 0, 0, ,, ,5 Flange FO-160 FO-2 0, 0, 00 0, 0, FL-0 0, 0, , f7 6, FL-160 0, 0, f Through hole G-0 0, 0, M0 x1,5 without D5 D6 E E1 H L L with rapid strokes: L1 R S2 S SW SW1 T T1 T Foot FO-0 M6 0, ,5 2, 5 Flange FO-160 FO-2 M M 0 14, 19, FL-0 M6 0, ,5 2, FL-160 M 2 14, Through hole G-0 M6 0, ,5 2, 5 MC-VSC-4
5 FO, FL, G Series Variable Stroke Straight Line Action Clamps Technical Information Dimensions One-hand operation (the and the hand wheel are operated simultaneously) Through hole Flange Foot *without counter-force effect rapid clamping stroke* G-02/ G-2/45 Important The Straight Line clamps are designed only for axial load. In case of side load, we recommend an additional radial support of the. FL-2/45 FL-162/60 FO-02/ FO-2/45 FO-162/60 Foot with FO-02- FO-2-45 A A 1 A 2 A A 4 A 5 B B 1 B 2 D h D 1 D 2 D D , , 6, ,5 6,5 16 FO Flange FL f7 6,5 FL f Through hole G-02- G ,5 M24x1,5 M0x1,5 16 with D 5 D 6 E E 1 H L L 1 S 2 S SW SW 1 T T 1 T Foot FO-02- FO-2-45 M5 M ,2, ,5 2,5 FO M Flange FL-2-45 M6 52,5 27 2,5 FL M , Through hole G-02- G-2-45 M5 M6 52 9,2, ,5 2,5 0 MC-VSC-5
6 One-hand operation (the and the hand lever are operated simultaneously) FO, FL, G Series Variable Stroke Straight Line Action Clamps Technical Information Dimensions Through hole Flange Foot *without counter-force effect rapid clamping stroke* G-1/45 Important The Straight Line clamps are designed only for axial load. In case of side load, we recommend an additional radial support of the. Foot FL-1/45 FL-161/60 with FO-1/45 FO-161/60 FO-221/0 A A 1 A 2 A A 4 A 5 B B 1 B 2 D h D 1 D 2 D D 4 FO ,, ,5 Flange FO FO FL , f7 6, FL f Through hole G ,5 M0x1,5 with D 5 E E 1 H L L 1 R S 2 S SW SW 1 T T 1 T Foot FO-1-45 M6, ,5 Flange FO FO M M 0 14, 19, FL-1-45 M6, , FL M 2 14, Through hole G-1-45 M6, ,5 MC-VSC-6
7 F-160 Series Variable Stroke Straight Line Action Clamps Technical Information Dimensions Technical features: High holding capacity of [ lbf] 00N lbs. High side load capacity Plunger guide Wiper ring avoiding contamination of clamping mechanism Block style base provides for variable ing Low weight due to the aluminium housing 50 mm horizontal and vertical hole pattern Accessories (order separately) Plunger 00 [90] 0 [01] Allowable side load FS depending on the stroke length L H For rapid D h D 5 D 9 L T 16/ M 16/ M 0 16/00* M Weight [lbs.] kg [0.90] 0,4 [1.] 0,5 [1.54] 0,7 Lateral Load F S N [lbf] 1600 [7] [62] 00 [54] 00 [445] 00 [6] 600 [267] 0 [17] 0 [9] 0 [0] [0] [1.97] [.94] [5.91] [7.7] [9.4] [.1] Stroke Length L H mm [in] *0 and 500 mm strokes available on request Swivel thrust pad Use with A 5 D 5 D E 1 T SW 1 diameter K-50 6 M5 5 9,2 K-6,5 M6 6,5 K M 14, 14 1 K M 9,5 19, Clamping stroke, max. 4mm Rapid without F-160 Max. holding cap. [lbs] N [] 00N Fs* [lbs] N [1] 500N b 1 b 2 For rapid strokes: L *Fs=exerting force at an operating force of [22lbf] 0N. I1 I2 I I4 I5 I6 I7 I d 1 H7 d 2H d d 4 d 5 R Weight [lbs.] kg ,,5 165 [.0] 1,5 MC-VSC-7
8 Variable Stroke Straight Line Action Clamps Notes MC-VSC-
Straight Line Action Clamps
Straight Line Action Clamps Sizing and Application Chart Click Page # View N [lbf.] mm [inch] Series Page MC-SLA-# 0 to 1000 [0 to 225] 1000 to 2000 [225 to 450] 2000 to 3000 [450 to 675] 3000 to 5000
More informationpull action latch clamps
pull action latch clamps Sizing and Application Chart Click Page # View Max. Holding Capacity N [lbf.] Plunger Travel mm [inch] Series Page MC-PAL-# 0 to 2000 [0 to 450] 2000 to 4000 [450 to 900] 4000
More informationHydraulic Clamping Systems
Hydraulic Clamping Systems Hydraulic screw-in cylinder, single action Operating pressure max. 350 bar / min 100 bar These hydraulic crew-in cylinder are single acting and with spring retraction. They can
More information> clamping force up to kn. > operating pressure up to 500 bar. > piston with internal thread. > for push- and pull operation
Block CYLINDERS for VARIOUS DESIGN APPLICATIONS > clamping force up to 155.5 kn > operating pressure up to 500 bar > piston with internal thread > for push- and pull operation > with longitudinal and cross
More information/2017. Hollow piston cylinder, single-acting spring clamping hydraulic unclamping
, single-acting spring clamping hydraulic unclamping Applications: un-pressurized long-term clamping of dies or fixtures on press beds and rams when the space available is limited T-bolt Spring clamping
More information03/2017 SRA SELF-ADJUSTING SWING CLAMP CYLINDERS
SRA SELF-ADJUSTING SWING CLAMP CYLINDERS SRA SELF-ADJUSTING SWING CLAMP CYLINDERS PATENT-REGISTERED SRA CYLINDERS Double-acting swing clamp cylinders with integrated work support of the SRA series have
More informationH1 Axial Piston Tandem Pumps Size 045/053
MAKING MODERN LIVING POSSIBLE Technical Information H1 Axial Piston Tandem Pumps Size 045/053 powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev November 2015 Master Model
More informationHydraulic clamping elements
Hydraulic clamping elements hydraulic 3 Contents Product group 3 Hollow piston cylinder single-acting 3.1403 3.2130 Sliding clamp single-acting compact classic 3.2202 3.2204 Angular clamping element single
More informationROTARY MODULES. Rotary modules
Rotary modules Rotary modules ROTARY MODULES Series Size Page Rotary modules RM swivel unit 156 RM 08 160 RM 10 162 RM 12 164 RM 15 168 RM 21 172 RM rotor 176 RM 50 180 RM 110 182 RM 200 184 RM 310 186
More information> piston force up to 20,1 kn. > operating pressure 250/350 bar. > chemically nitrided body. > piston force up to 44,0 kn. > operating pressure 350 bar
Vertical and link CLAMPS for DEMANDING TASKS vertical CLAMP > piston force up to 20,1 kn > operating pressure 250/350 bar > chemically nitrided body link CLAMP > piston force up to 44,0 kn > operating
More informationPneumatic Power Clamps
15.61 Pneumatic Power Clamps Series 82M-6 Product Overview (last time in catalog) Features: modular design shielded body, dirt-resistant compact design high holding torques long life cycle low weight (aluminium
More informationWorm gear S 345. Properties: General: Single-stage worm gear For use in combination with our motors.
S 345 Aluminium Power deviation 90 Options: Special shaft, 2nd shaft end Loading capacity Max. radial force N 100 Max. axial force N 50 Mounting Shaft diameter mm 6 Weight kg 1.2 Flange 5 1.8 0.65 10 1.9
More informationStandard Parts for Mould Making
Standard Parts for Mould Making Index Your Production Partner 4-5 Guide Elements Locating units, round 8 Locating units, flat 8 Compensation Discs 9 Adjusting washers 9 Ejector rods 10 Centering sleeves
More informationMO Declutchable Manual Override Gearbox EL-O-Matic F-Series Actuators option
EFG.07.MO.EN, Page 1 of 2, Rev. 0 May 2018 MO Declutchable Manual Override Gearbox s option Light weight aluminum design and suitable for indoor and outdoor use. Easy operation. Suitable for quarter turn
More informationGTO Precise, universal stationary chuck for collets
Precise, universal stationary chuck for collets Advantages of the stationary chuck: Rapid and easy mounting Quick change of the standard collets Sensitive adjustment of the clamping force possible Highest
More informationNOMENCLATURE. Optional: V = Viton FKMsealing. RÖHM Z centric gripper Pneumatic. Sizes A = Alternative jaw fixture by tongue and groove
NOMENCLATURE RZP -A - 100-1 / GA / V RÖHM Z centric gripper Pneumatic A = Alternative jaw fixture by tongue and groove Sizes 64-300 Jaw stroke variant 1 = long stroke 2 = short stroke Optional: spring
More informationAutomatic Positioning System APS
Automatic Positioning System APS 0 MODULES page 6 CLAMPING PINS page 12 PLATES page 13 TOMBSTONES page 18 CRANKWEBS page 22 STEEL SMOOTH PLATES page 24 STEEL PLATES WITH GRID page 25 FLANGES FOR INDEXING
More informationLinear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 79
Linear Actuator with Ball Screw Series OSP-E..S Contents Description Page Overview 71-74 Technical Data 75-78 Dimensions 79 71 The System Concept ELECTRIC LINEAR ACTUATOR FOR HIGH ACCURACY APPLICATIONS
More informationFisher 657 Diaphragm Actuator Sizes and 87
Instruction Manual 657 Actuator (30-70 and 87) Fisher 657 Diaphragm Actuator Sizes 30 70 and 87 Contents Introduction... 1 Scope of Manual... 1 Description... 2 Specifications... 2 Installation... 3 Mounting
More informationValtek Auxiliary Handwheels and Limit Stops
Valtek Auxiliary s and Limit Stops Table of Contents Page 1 General information 2 Installation 2 Side-mounted handwheels, size 25 and 50 (linear actuators) 3 Side-mounted handwheels, size 100 and 200 (linear
More informationsqueeze action plier clamps
squeeze action plier clamps Sizing and Application Chart N [lbf.] Maximum Clamping Thickness mm [inch] Series Page: MC-SAP-# 0 to 1000 [0 to 225] 1000 to 2000 [225 to 450] 2000 to 3000 [450 to 65] 3000
More informationAutomatic Positioning System APS
Automatic Positioning System APS 0 MODULES pag. 0. 2 CLAMPING PINS pag. 0. 5 / 0. 8 PLATES pag. 0. 9 PLATES FOR 5 AXIS pag. 0. 13 ANGLE PLATE pag. 0. 21 TOMBSTONES pag. 0. 26 CRANKWEBS pag. 0. 30 STEEL
More informationAccessories, spare parts and measuring equipment
Accessories, spare parts and measuring equipment The broad range of accessories, spare parts and measuring equipment represents a useful addition to the range of actual clamping tools and offers spare
More informationWedge clamps
Wedge clamps Wedge clamps for dies with tapered clamping edge Without position monitoring up to 160 C* 2.24000 With position monitoring lateral fastening up to 100 C** 2.24001 With position monitoring
More informationCAPTIS. The modular and flexible system for internal and external clamping
NEW CAPTIS Clamping system The modular and flexible system for internal and external clamping CAPTIS Clamping SYSTEM The new, modularly designed CAPTIS clamping system is very impressive with its high
More informationSpecifications. Trantorque GT CALL FAX
GT Specifications The following pages contain engineering data and product specifications for GT. For CAD drawings of GT, please click on the part number to download the drawing. All drawings are in AutoCAD
More informationNEW. Cone Clamping Elements Trantorque Keyless Locking Devices for very small diameters from 3 mm. E03.050e
Cone Clamping Elements Trantorque Keyless Locking Devices for very small diameters from 3 mm NEW E03.050e Backlash free positioning Excellent concentricity Quick mounting by central clamping nut Issue
More informationPTM Rotary Actuators and Parallel Grippers on 2D- and 3D- format
PTM Rotary Actuators and Parallel Grippers on 2D- and 3D- format For design engineering support we offer our complete product range on 2D- and 3D- format, on scale 1:1, metric dimensions. We are constantly
More informationSD Bendix Manual Slack Adjusters DESCRIPTION ADJUSTING MECHANISM OPERATION
SD-05-1200 Bendix Manual Slack Adjusters WORM SHAFT (LOCK SCREW) FIGURE 1 - POSITIVE LOCK TYPE SLACK ADJUSTER DESCRIPTION In an s-cam type foundation brake, the final link between the pneumatic system
More informationTechnical Information
Technical Information TI No. WL 80-48 E April 1999 Rolling Bearings FAG Mechanical Extractors Small rolling bearings with bore diameters of up to about 100 mm which have an interference fit on the shaft
More informationH1 Axial Piston Tandem Pumps Size 045/053/060/068
Technical Information H1 Axial Piston Tandem Pumps Size 045/053/060/068 powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev September 2017 add G6 option 0603 June 2017 minor
More informationPneumatic Rotary Actuator Type 3278
Pneumatic Rotary Actuator Type 3278 Fig. 1 Type 3278 Pneumatic Rotary Actuator 1. Design and principle of operation The single-acting rotary actuator incorporating spring return mechanism can be attached
More informationAxial Piston Pumps for Commercial Vehicles from Bosch Rexroth
Axial Piston Pumps for Commercial Vehicles from Bosch Rexroth Geert Geven(DCBN/SLM) 1 Overview - Truck pump A17/A18 Model A17FO (KFA) A17FNO A17VO (KVA) A18VO A18VLO Design fix displacement middle pressure
More informationRepair Manual VW 02T gearbox. INA GearBOX
Repair Manual VW 02T gearbox INA GearBOX Special tools Repair Manual for the VW 02T gearbox Drain the transmission fluid (arrow). Remove the gearbox from the vehicle in accordance with the vehicle manufacturer
More informationLinear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 89
Linear Actuator with Ball Screw Series OSP-E..S Contents Description Page Overview 79-82 Technical Data 83-88 Dimensions 89 79 The System Concept ELECTRIC LINEAR ACTUATOR FOR HIGH ACCURACY APPLICATIONS
More informationTRADITIONAL SHAFT HUB CONNECTIONS
TABLE OF CONTENTS MAV locking devices.... Pg. 2 Traditional shaft hub connections...pg. 3 Advantages of MAV locking devices...pg. 4 The wedge principle..... Pg. 5 Installation removal...pg. 6 Characteristics....
More informationKLM. Application example. Linear modules Pneumatic Stroke module. 1 Single base support, SOE Adapter plate, APL 121
KLM www.comoso.com Sizes 25.. 100 Mass 0.5 kg.. 5.18 kg Driving force 50 N.. 294 N Stroke 25 mm.. 225 mm Repeat accuracy ± 0.01 mm.. ± 0.015 mm Application example 4 5 3 3 6 7 2 2 8 1 1 Pneumatic two-axis
More informationInstallation and Operational Instructions for EAS - HTL housed overload clutch Sizes 01 3 Type 490._24.0
Please read these Operational Instructions carefully and follow them accordingly! Ignoring these Instructions may lead to malfunctions or to clutch failure, resulting in damage to other parts. Contents:
More informationPOWER CLAMPING.
www.jergensinc.com POWER CLAMPING Air Circuit Controls- 2-Hand No Tie Down....59 Booster Clamping Kit....49 Boosters, High Pressure/Volume....47 Booster Installation Kits....48 Boosters, Pre-Fill....44
More informationShaft Couplings Flange-Couplings Rigid Shaft Couplings Flexible Couplings
Shaft Couplings Flange-Couplings Rigid Shaft Couplings Flexible Couplings 44 Edition 2013/2014 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg 2 Table of Contents Flange-Couplings Page Flange-Couplings
More informationPower-Lock shaft-hub locking devices provide simple and highly secure connections.
POWER-LOCK Power-Lock shaft-hub locking devices provide simple and highly secure connections. AS Series Multipurpose locking devices available in stainless steel and electroless nickelplated finish, in
More informationHigh Performance: Dyna-Lite Series
High Performance: Dyna-Lite Series GAM can. If you don t see exactly what you need, let us know. We can modify the Dyna-Lite Series gearboxes to meet your needs. Page 4 provides a list of commonly requested
More informationGSM. Modular Design. Versions of the series. Type GSM. Gripper type P Z W R. Size. {} AS IS without O.D. clamping I.D. clamping
GSM Pneumatic Gripper-Swivel System Modular Design Versions of the series Type GSM Gripper type P Z W R Size 32 40 50 64 30 38 45 16 20 25 32 40 16 20 25 32 40 Gripping force safety device {} AS IS without
More informationLOCKED SERIES. Machine Failures. General Information. set up. maintenance. reconditioning. repair 30.4%
General Information LOCKED SERIES 2 Lowering machinery process costs is key in today s world. According to a recent study approximately a third of all machine stoppages result in unexpected damage and
More informationTechnical Data and Dimensions EMC
Technical Data Electromechanical Cylinders EMC 5 Technical Data and Dimensions EMC Sizes 3 to 00 follow the standard cylinder series according to ISO 555. Built-in ball screw drives have a diameter of
More informationpneumatic swing clamps
pneumatic swing clamps Sizing and Application Chart Series Standard Features Bore Clamping Clamping Force [lbf.]n 90 Series [0.86] 22 [0.] 13 [34] 0 Arm rotates at the top of stroke Shielded rod protects
More informationRZP. 3-jaw centric gripper
RZP Centric gripper with high precision and tried and tested T-groove. Simple interface master jaw / top jaw with 2 centring sleeves and 2 screw threads. 1. Body Tried and tested T-groove gripping guide
More informationOPTIMAL COMPONENT SUPPORT. Optimal support of components for every application, e.g. crankshaft machining.
OPTIMAL COMPONENT SUPPORT Optimal support of components for every application, e.g. crankshaft machining 6150 SELF-CENTERING STEADY RESTS With self-centering steady rests, RÖHM makes an important contribution
More informationRFC SPECIALTY LOCKING DEVICES
RINGFEDER Products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA email: sales@mdmetric.com web: http://mdmetric.com phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142
More informationSqueeze Action Plier Clamps
7.7 Series 460, 480 Product Overview Drop forged alloy steel components for exceptional strength Two way trigger release allows for fast and easy opening of clamp Welding 462 462-2 463 480 482 With Two
More informationActuator Products Rodless Cylinders. GDL Series. Material specifications. Specifications OSP-P. Series. Series P1X. Series P1Z.
Catalog PDN1-3US High Performance : (s FDC12HP-... thru FDC45HP-...) The High Performance series is the basis for s development, which is used in the majority of applications. High Performance guides consist
More informationWORKHOLDING SYSTEMS
www.ptgworkholding.co.uk WORKHOLDING SYSTEMS INSTALLATION & PRE-LOADING INSTRUCTIONS INSTALLATION & PRE-LOADING INSTRUCTIONS Pre-load Flats Machine Drawbar M/C Spindle Pre-load Adjustment Screw Mandrel
More informationHeavy Duty Ball Screw Linear Actuators
Heavy Duty Ball Screw Linear Actuators Thrust From 2,000 to 25,000 lbf Heavy Wall Steel Construction Longest Life Simultaneous High Thrust with High Speed Piston with Rugged Anti Rotation Feature Sealed
More informationQUICK-ACTING JAW CHANGE SYSTEM
QUICK-ACTING JAW CHANGE SYSTEM The RÖHM key bar chucks with quick-acting jaw change system convince in two ways. On the one hand the jaws can be quickly and easily turned, changed or offset over the entire
More information3M Overhaul Service Kit
SERVICE INSTRUCTIONS FOR 3M 12,000 RPM 3 in. (77 mm) RANDOM ORBITAL SANDERS 3M Overhaul Service Kit The part number 20346, 3M Overhaul Service Kit, contains all the replacement parts that naturally wear
More informationTransmission, disassembling and assembling
Page 1 of 27 34-43 Transmission, disassembling and assembling Disassembly sequence Page 34-55. Transmission overview 1-1st gear 2-2nd gear 3-3rd gear 4-4th gear 5-5th gear 6 - Reverse gear Removing and
More informationThe PReMIeRe of The year
The PReMIeRe of The year SRU-plus pneumatic universal rotary actuator SRU-plus Pneumatic universal rotary actuator SRU-plus one of the most powerful rotary actuator on the market. a consistent modular
More informationKONEX Pneumatic Modular Gripping System KONEX Gripping force Torque Piston force (extended)
KONEX Gripping force 100 N Torque 0.9 Nm Piston force (extended) 250 N Application example KONEX weight-reduced, modular gripping system for economical automation in assembly and production KONEX P 50
More informationUB2 SERIES GOLD LINE SHOT PIN
ISO 9001 REGISTERED UB2 SERIES GOLD LINE SHOT PIN NO LUBRICATION REQUIRED NPT OR G PORTS INTEGRATED CYLINDER SHROUD SOLID STATE CYLINDER SWITCH OR WORLD SWITCH NAAMS STANDARD MOUNTING RAP OR RIGID COUPLER
More informationIn-Line Positive Feed Tools
In-Line Positive Feed Tools ADVANCED DRILLING EQUIPMENT SP-1300-1-EN-0806-.25M 1-1 Introduction In-Line Positive Feed Tools How Positive Feed Drills Operate Our in-line positive feed drills use two interconnected
More informationLinear Drive with Toothed Belt Series OSP-E..B. Contents Description Overview Technical Data Dimensions Order Instructions 46
Linear Drive with Toothed Belt Contents Description Page Overview 35-38 Technical Data 39-43 Dimensions 44-45 Order Instructions 46 35 The System Concept ELECTRIC LINEAR DRIVE FOR POINT-TO-POINT APPLICATIONS
More informationLinear Drive with Ball Screw Drive Series OSP-E..SB
Linear Drive with Ball Screw Drive Series OSP-E..SB Contents Description Data Sheet No. Page Overview 1.30.001E 47-50 Technical Data 1.30.002E-1 to 5 51-55 Dimensions 1.30.002E-6, -7 56-57 Order instructions
More informationCompact. Fast. Productive. DRL Lift/Swivel Unit
DRL Compact. Fast. Productive. DRL Lift/Swivel Unit Compact lift/swivel unit consisting of a strong short-stroke cylinder and a rack pinion swivel drive. Field of Application For use in clean and slightly
More informationGMR-S and GMR40-S Disc Brake Caliper - Spring Applied, Air Released
(GMR) 9 (GMR) ø GMR-S and GMR-S Disc Brake Caliper - Spring Applied, Air Released DB Nominal dimensions given. For specific dimensions please contact Twiflex Limited. For GMR Mk caliper details see DB
More informationHYDROKOMP. Clamping Systems. Technology that connects. precise durable varied. Brand name products by Hydrokomp
HYDROKOMP Clamping Systems precise durable varied Brand name products by Hydrokomp Technology that connects HYDROKOMP GmbH Siemensstraße 16, 35325 Mücke (Germany) Phone: +49 6401 225999-0 Fax: +49 6401
More informationThe 6-Speed Manual Gearbox 08D
Service. Self-Study Programme 299 The 6-Speed Manual Gearbox 08D Design and Function The Touareg is an exclusive cross country vehicle with the driving properties and driving comfort of a sporty luxury
More informationZERO-POINT CLAMPING SYSTEM
simple. gripping. future. ZERO-POINT CLAMPING SYSTEM 22 Quick Point Grid Plates 3 Quick Point Plates 34 Quick Point Round Plates 39 Quick Point Adaptor Plates 4 Quick Point Clamping Studs 43 Quick Point
More informationTECHNICAL INFORMATION
General Nomenclature Spherical Roller Bearings The spherical roller bearing is a combination radial and thrust bearing designed for taking misalignment under load When loads are heavy, alignment of housings
More informationHT125KM, FA3TM, FA6TE
HT125KM, FA3TM, FA6TE FLANGE ALIGNMENT TOOLS Operator Instruction Manual info@equalizerinternational.com www.equalizerinternational.com INNOVATION IN ITS MOST FUNCTIONAL FORM INDEX SECTION CONTENTS PAGE
More informationCLAMPING ELEMENTS SELF-CENTRING RCK 15 TYPE SELF-CENTRING RCK 13 TYPE
CLAMPING ELEMENTS The clamping system connects one or two component parts solidly to the drive shaft, which allow motion to be transmitted or to withstand an axial thrust. Friction connection enables gaps
More informationLinear Actuator with Ball Screw and Extending Rod Series OSP-E..SBR. Contents Description Overview Technical Data Dimensions 110
Linear Actuator with Ball Screw and xtending Rod Series OSP-..SBR Contents Description Page Overview 103-106 Technical Data 107-109 Dimensions 110 103 The System Concept LCTRIC LINAR ACTUATOR FOR PRCIS
More informationSyslog Technologies Innovative Thoughts
HYDRO-PNEUMATIC VICE WITH PRESSURE BOOSTER SYNOPSIS This project deals with the design and fabrication of the hydro pneumatic vice with an air-to-hydraulic pressure booster, the hydro pneumatic vice is
More informationType 657 Diaphragm Actuator Sizes and 87
Instruction Manual Form 1900 January 2000 Type 657-70 & 87 Type 657 Diaphragm Actuator Sizes 30-70 and 87 Contents Introduction............................... 1 Scope of Manual.............................
More informationHEAVY DUTY WORM GEARBOX MODEL SBWG
FEATURES AND BENEFITS The SBWG model is suitable for use with Butterfly, Plug and any other type requiring quarter turn motion for thrust and torque applications High Tensile Aluminium bronze material
More informationKTR Torque Limiters Overload Protection Systems
KT Torque Limiters Overload Protection Systems UFLEX - Friction Disk - Zero Backlash Ball Detent KT SI - Ball/oller Bearing Style KT SI Compact - Zero Backlash Ball Detent Catalog Contents (Metric) Page
More informationSFL. Application example. Pneumatic Rotary Actuators Rotor. Weight kg. Axial force N. Sizes 25..
SFL Sizes 25.. 64 Weight 0.09.. 0.71 kg Torque 0.12 Nm.. 3.9 Nm Axial force 10.. 50 N Bending moment 0.1.. 0.5 Nm Application example Sorting unit with SFL rotor to drive the separator switch Rotor SFL
More informationMS25 HYDRAULIC MOTORS T E C H N I C A L C A T A L O G
MS25 HYRAULIC MOTORS T E C H N I C A L C A T A L O G Modular hydraulic motors MS25 OCLAIN HYRAULICS CHARACTERISTICS Motor inertia 0.4 kg.m² Theoretical torque Max.power Max. speed Max. pressure Cams with
More informationChuck size
URO-T / URO A Exterior form incl. splash water edge URO-T Technical features RÖHM URO-T Manual chucks: 20% higher clamping forces Chuck body stiffer (guarantees precision at higher loads) Surface of chuck
More informationGripping rotary modules.
Gripping rotary modules Gripping rotary modules GRIPPING ROTARY MODULES Series Size Page Gripping rotary modules RP 314 RP 1212 318 RP 1216 322 RP 1520 326 RP 2120 330 RP 2128 334 RC 338 RC 1212 342 RC
More informationSmall dampers refine end product
4 Motion Control Small dampers refine end product ACE rotary dampers mainly provide an invisible yet valuable service as a maintenance-free machine element to allow controlled deceleration of rotary or
More informationSIT-LOCK self locking elements
self locking elements Advantages of on the shaft-hub connection compared with traditional systems Easy assembly and disassembly Both actions take place by locking and unlocking the clamping screws with
More informationSelection Tool. on the Internet at in the section MÄDLER -Tools. Other sizes and designs on request. Connecting Shafts Page 766
Couplings Overview Friction Clutches Friction Clutches Type B Axial Arrangement Friction Clutches Type C Transversal Flexibility Sliding Hubs with Torsionally-Flexible Coupling Multi-Disk Friction Clutches
More informationSlotted nut NMG. Housing nut GWR. Bosch Rexroth AG. for economical constructions. a min. 0,3. M A = tightening torque of slotted nut.
R310EN 3301 (2009.08) Precision Ball Screw Assemblies Bosch Rexroth AG 113 Slotted nut NMG for economical constructions B D d d1 b M A = tightening torque of slotted nut a min. 0,3 Polyamide insert Designation
More informationBESTSELLER. Linear bushings. Product properties:
are reliable and cost-efficient bearings based on the roller bearing principle. Hereby, the balls move along an internal track on the load side, and then return via a return track resulting in an overall
More informationSolutions. We Manufacture. H y d r a u l i c s. Eaton Medium Duty Piston Pump. h y d r a u l i c s
H y d r a u l i c s ydraulics Eaton Medium Duty Piston Pump h y d r a u l i c s Model 70122, 70422, 70423, and 70523 or -Flow Compensated Piston Pumps We Manufacture April 1997 Solutions S o l u t i o
More informationQuick-change systems Content
Quick-change systems Content Quick-change systems at a glance... 12 Series S... 13 Series SR... 18 Series ASR... 39 Quick-change systems At a glance Quick-change systems > Safe and stable connection of
More information506E. LM Guide Actuator General Catalog
LM Guide Actuator General Catalog A LM Guide Actuator General Catalog A Product Descriptions 506E Caged Ball LM Guide Actuator Model SKR.. A2-4 Structure and Features... A2-4 Caged Ball Technology... A2-6
More informationHYDRAULIC CLAMPING TECHNOLOGY
PRODUCT OVERVIEW POWER SOURCES WORK SUPPORT CYLINDERS ROTARY COUPLING SWING CLAMPS RETRACTING CLAMPS HYDRAULIC March 2011 CAD FILES AVAILABLE ONLINE 2 Hydraulic Clamping Technology Hydraulic power sources
More informationpneumatic function fittings
Parker Legris connectic products are available from MARYLAND METRIS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 email: sales@mdmetric.com web:
More informationDr. TRETTER AG. Tolerance Rings. safe cost-effective fast assembly
Dr. TRETTER AG Tolerance Rings safe cost-effective fast assembly Tolerance Rings are corrugated metal strips manufactured of high quality spring steel. Tolerance Rings are a fastening device between two
More informationLinear Bushings and Shafts
Linear Bushings and s R310EN 3100 (2004.09) The Drive & Control Company R310EN 3100 (2004.09) Linear Bushings Bosch Rexroth AG 3 Linear Bushings and s Selection Guide 9 Product Overview 10 Overall Dimensions
More informationExternal gear pump Series G
External gear pump Series G RE 10 093/04.14 Replace RE 10 093/06.13 AZPG-22 Fixed pumps V = 22.5...100 cm 3 / rev Overview of contents Contents Page General 2 Product overview 3 Ordering code single pumps
More informationTELESCOPIC CYLINDERS ø mm Series RT
TELESCOPIC CYLINDERS 25 63 mm Series RT The overall dimensions are one of the most imporant aspects: in comparison with a traditional ISO cylinder of the same a reduction in size of approx. 45% (with a
More informationClutch, servicing. Special tools, testers and auxiliary items required. Flywheel retainer Thrust pad 3062
Page 1 of 10 30-36 Clutch, servicing Special tools, testers and auxiliary items required Flywheel retainer 10-201 Thrust pad 3062 Page 2 of 10 30-37 Centering mandrel 3176 Grease G 000 100 Notes: Observe
More informationTable of contents. Attachments, accessories 161
Table of contents Attachments, accessories 6 Product overview Mounting kits for limit switches Mounting kits for proimity switches ocking devices Actuators Detents andles 60 6 Mounting kits for limit switches
More informationCLUTCH CONTENTS SERVICE DIAGNOSIS. (a) Worn or damaged disc assembly. (b) Grease or oil on disc facings. (c) Improperly adjusted cover assembly.
CLUTCH CONTENTS -GROUP 6 Page CLUTCH HOUSING ALIGNMENT... 6 CLUTCH PEDAL FREE PLAY 1 CLUTCH RELEASE BEARING 5 CLUTCH RELEASE FORK... 5 CLUTCH SERVICING 2 PILOT BUSHING CRANKSHAFT TO TRANSMISSION DRIVE
More informationExternal Gear Pumps Series F
External Gear Pumps Series F RA 10089/08.11 Replaces: RA 10097 1/60 AZPF-... Fixed pumps Size 4.0...28 cm 3 /rev (.25-1.71 in 3 /rev) Overview of contents Contents Page General 2 Product overview 3 single
More informationParallel Grippers. Body One piece anodized aluminum body
Catalog 19-2/US Features Rack and Pinion Rack and pinion drive mechanism provides synchronous motion. Body One piece anodized aluminum body Bushings Four composite bushings provide the support needed for
More informationAssembly Products. View Assembly Products at: LINEAR ACTUATORS AND MODULAR UNITS FOR YOUR APPLICATION
Assembly Products LINEAR ACTUATORS AND MODULAR UNITS FOR YOUR APPLICATION View Assembly Products at: www.clrh.com (636) 386-8022 www.clrh.com Drive, Assembly and Handling Technology Linear Actuators n
More informationIPV catalog High-pressure internal gear pumps
Voith Turbo IPV catalog High-pressure internal gear pumps Benefits that convince Internal gear pumps from Voith Turbo are working reliably in hundreds of thousands of machines worldwide. Sophisticated
More information