Stainless Steel Traction Gas Springs (Pull Type)
|
|
- Dwayne Mills
- 6 years ago
- Views:
Transcription
1 Stainless Steel Traction Gas Springs (Pull ) Stainless steel industrial traction gas springs Material 1.41/1.45, AISI 4/3 (V2A) Material /1.4571, AISI 3/3Ti (V4A) In addition to the comprehensive range of industrial gas springs with valve, ACE also offers a wide range of industrial traction gas springs made of stainless steel with body diameters from to 40. This high-quality version is also available on request in all stroke lengths and possible extension forces. The comprehensive range of fitting parts ensures easy installation and makes the gas traction springs universal in use. Stainless steel traction gas springs are used everywhere that raising and lowering is required. Due to their special properties, non-rusting and low magnetism, they are the preferred equipment for medical and cleanroom technology, the foodstuffs industry, electronics and shipbuilding sector. Filled with High Pressure Nitrogen Gas Piston with Seals Stainless Steel Outer Body Seals Stainless Steel Piston Rod Main Bearing The weatherproof ones! Gas Valve Operating fluid: Nitrogen gas Material: Piston rod, body and end fittings: Material 1.41/1.45, AISI 4/3 (V2A) and material /1.4571, AISI 3/3Ti (V4A). Mounting: In any position Operating temperature range: - C to 0 C On request: Special force curves, special lengths, alternative seals, wiper
2 Stainless Steel Traction Gas Springs GZ--V4A (Pull ) Traction (Pull) Forces 50 N to 0 N (when Piston Rod Extended up to 5 N) B3,5 M3.5x0. Stud Thread B3,5 Ø 4 Ø. R4 Ø Ø Ø13 11 M4x /- 2 5 GZ---V4A 7 GZ--40-V4A 40 7 GZ--50-V4A GZ--0-V4A 0 7 GZ--0-V4A 0 7 GZ--0-V4A 0 7 GZ--0-V4A 0 7 GZ--0-V4A (Pull ) Body Ø ( ) (0 ) Piston Rod Body Traction Force F 1 0 N GZ--0-AC-0-V4A by the customer to prevent unscrewing (i.e. octite). see page. 4 thick 11 Eye Clevis Fork Ball Socket 7 0 O N GZ--V4A O N see page. fittings, rod shroud. Material: Piston rod, body and end fittings: Material /1.4404, AISI 3/3Ti (V4A). Progression: Approx. 23 %, F 2 max. 5 N Available traction force range F 1 at C: 50 N to 0 N Note: ifetime approx. 00 m DE-GAS-3,5 0 Stoßdämpfer GmbH PO Box DE angenfeld Tel Fax info@ace-int.eu
3 Stainless Steel Traction Gas Springs GZ--VA (Pull ) Traction (Pull) Forces N to 0 N (when Piston Rod Extended up to 333 N) B Mx1.25 Stud Thread B Ø Ø A-VA C-VA D-VA 22 E-VA R7 Ø Ø Ø +/- 2 Ø 11.5 Mx1.25 Ø GZ---VA 1 GZ--50-VA 50 0 GZ--0-VA 0 0 GZ--0-VA GZ--0-VA 0 0 GZ--250-VA (Pull ) Body Ø ( ) (0 ) Piston Rod A-VA Body C-VA Traction Force F 1 0 N GZ--0-AC-0-VA by the customer to prevent unscrewing (i.e. octite). see page 9. thick 32 Eye A-VA max. force 0 N C-VA max. force 10 N Clevis Fork D-VA max. force 0 N Swivel Eye E-VA max. force 0 N G-VA 13 3 Ø Ø13 3 Ball Socket G-VA max. force 10 N Ø 13 W--VA Ø 23 = + DE-GAS- PA-V4A OA-V4A NA-V4A MA-V4A A-VA C-VA D-VA MA-V4A PG-V4A GZ--VA OG-V4A NG-V4A E-VA G-VA see page 9. fittings, wiper. Gas springs and with material / (V4A). Material: Piston rod: Material , AISI 3 (V4A). Body and end fittings: Material 1.41, AISI 4 (V2A). Progression: Approx. 11%, F 2 max. 333 N Available traction force range F 1 at C: N to 0 N Note: ifetime approx. 00 m Stoßdämpfer GmbH PO Box DE angenfeld Tel Fax info@ace-int.eu 1 1
4 Stainless Steel Traction Gas Springs GZ-2-VA (Pull ) Traction (Pull) Forces 0 N to 00 N (when Piston Rod Extended up to 0 N) B Mx1.5 Stud Thread B A-VA C-VA Ø24 Ø D-VA E-VA R9 Ø 3 Ø 40 Ø /- 2 Ø thick Mx1.5 Ø Ø Ø 2 GZ-2-50-VA 50 5 GZ-2-0-VA 0 2 GZ-2-0-VA 0 25 GZ-2-0-VA 0 3 GZ VA 250 GZ-2-0-VA 0 4 GZ-2-0-VA 0 45 GZ VA GZ VA GZ VA 500 GZ VA GZ-2-00-VA 00 7 (Pull ) Body Ø (2 ) (0 ) Piston Rod E-VA Body E-VA Traction Force F 1 00 N GZ-2-0-EE-00-VA by the customer to prevent unscrewing (i.e. octite). see page Eye A-VA max. force 300 N C-VA max. force 1750 N Clevis Fork D-VA max. force 300 N Swivel Eye E-VA max. force 300 N W-2-VA Ø 32 = DE-GAS- MA-V4A A-VA GZ-2-VA C-VA D-VA E-VA see page 9. fittings, wiper. Gas springs and with material / (V4A). Material: Piston rod, body and end fittings: Material 1.41/1.45, AISI 4/3 (V2A). Progression: Approx. 22%, F 2 max. 0 N Available traction force range F 1 at C: 0 N to 00 N Note: ifetime approx. 00 m 2 Stoßdämpfer GmbH PO Box DE angenfeld Tel Fax info@ace-int.eu
5 Stainless Steel Traction Gas Springs GZ-40-VA (Pull ) Traction (Pull) Forces 400 N to 5000 N (when Piston Rod Extended up to 7000 N) B Mx1.5 Stud Thread B Ø 2 Ø 40 A-VA Ø Ø 22 2 D-VA E-VA R.5 Ø 3 Ø.1 5 Ø Mx1.5 +/- 2 Ø Ø2 GZ-40-0-VA GZ-40-0-VA GZ-40-0-VA GZ VA GZ-40-0-VA GZ VA GZ VA GZ VA (Pull ) Body Ø (40 ) (0 ) Piston Rod E-VA Body E-VA Traction Force F 1 00 N GZ-40-0-EE-00-VA by the customer to prevent unscrewing (i.e. octite). see page 0. thick Eye A-VA max. force 30 N Clevis Fork D-VA Swivel Eye E-VA W-40-VA Ø 45 = + 40 DE-GAS- ME-VA A-VA ND-VA GZ-40-VA D-VA ME-VA E-VA see page 0. On request: Increased traction force, special force curves, special lengths, alternative end fittings, wiper. Gas springs and with material / (V4A). Material: Piston rod, body and end fittings: Material 1.41/1.45, AISI 4/3 (V2A). Progression: Approx. 40 %, F 2 max N Available traction force range F 1 at C: 400 N to 5000 N Note: ifetime approx. 00 m Stoßdämpfer GmbH PO Box DE angenfeld Tel Fax info@ace-int.eu 3 3
Stainless Steel Industrial Gas Springs (Push Type)
Stainless Steel Industrial Gas Springs (Push ) Stainless steel gas springs (push type) Material 1.1/1., AISI /3 (V2A), Material 1.0/1.71, AISI 31/31Ti (VA) In addition to the comprehensive range of industrial
More informationIndustrial Gas Springs
Industrial Gas Springs Function, Calculation and Mounting Tips Gas springs are universally accepted, wherever you want to push pull lift lower, or position covers, lids or other components by hand without
More informationTraction Gas Springs GZ-15 to GZ-40 (Pull Type)
Traction Gas Springs GZ- to GZ-40 (Pull ) Industrial traction gas springs are maintenance-free and ready to install. They are available ex-stock with body diameters from to 40 and forces from N to 000
More informationIndustrial Gas Springs Pull Type
4 Motion Control Industrial Gas Springs Pull Type Takes over when things get too tight for gas pressure springs If ACE gas push type springs cannot be used due to a lack of space, ACE s industrial gas
More informationMiniature Shock Absorbers MC5 to MC75
Miniature Shock Absorbers MC to MC7 ACE miniature shock absorbers are maintenance-free, self-contained hydraulic components. The model range MC to MC7 have a very short overall length and a low return
More informationMiniature Shock Absorbers MC5 to MC75
Miniature Shock Absorbers MC to MC7 1 ACE miniature shock absorbers are maintenance-free, self-contained hydraulic components. The model range MC to MC7 have a very short overall length and a low return
More informationPush Type Gas Springs
Push Type Gas Springs ICTATOR high-performance push type gas springs make life easier by lifting loads smoothly and effortlessly. We have a vast product range with many potential applications. We manufacture
More informationShock absorbers in miniature format Rod Button. Slot
8 Miniature Shock Absorbers MC5 to MC75 Miniature Shock Absorbers Shock absorbers in miniature format Rod Button Ideal for compact, effi cient designs: The MC5 to 75 series impresses users with their reduced
More informationMiniature Shock Absorbers
1 Automation Control Tuning for almost any design Miniature shock absorbers from ACE are tried-and-tested quality products used in millions of industrial construction designs throughout the world. They
More informationShock Absorber Accessories M5 to M25
Shock Absorber Accessories M to M 34 Selection Chart for Shock Absorber Accessories 1 Clamp Mount/ Universal Mount 2 Side Load Adaptor Shock Absorber Type KM AH MB RF UM BV Thread Size Mx0. MCEUM KM AH
More informationHeavy Industrial Shock Absorbers
80 Automation ontrol Heavy Industrial Shock Absorbers ffective shock absorption for heavy loads The heavy industrial shock absorbers from A round off the top of the company s offers in damping technology.
More informationPneumatic cylinders series CX Double acting with magnetic piston, ISO 15552, stainless steel G1/8 to G1/2 piston Ø 32 to 100 mm
Pneumatic cylinders series CX Double acting with magnetic piston, ISO 15552, stainless steel 000 400 Order code CX-032-0250-000 Note: Piston Ø 125, 160 and 200 on request. Series Piston Ø Stroke length
More informationLooking for a gas spring replacement...
Welcome to... ooking for a gas spring replacement... For over 40 years ACE has been successfully manufacturing and supplying a wide range of motion control products. Industrial gas springs have always
More informationTUBUS-Series Type TA
TUBUS-Series Type TA Profile Damper Axial Damping The profile damper type TA from the innovative ACE TUBUS series is a maintenancefree, self-contained damping element made from a special Co-Polyester Elastomer.
More informationPull Type Gas Springs
Pull Type Gas Springs ICTATOR pull type gas springs are the answer to your problems if you are unable to use normal push type gas springs due to a lack of space. They work in the opposite way to push type
More informationcompact magnetic cylinders
CATALOGUE > Release 8.7 > Series 32 cylinders Series 32 compact magnetic cylinders Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 2287»» Compact design»»
More informationStainless steel Cylinders Series 90
90 S E R I E S Catalogue 200 Stainless steel Cylinders Series 90 DIN/ISO 643 Single and double-acting (magnetic) ø 32, 40, 50, 63, 80, 00 and 25 cushioned Stainless steel cylinders Series 90 ø 32, 40,
More informationEye End Fittings to Gas Springs Page 6-11-A
Eye End Fittings to Gas Springs Page 6-11-A Stainless Steel Eyes M5 x 08 Stainless Steel Eyes M6 x 1 Stainless Steel Eyes M8 x 1.25 Stainless Steel Eyes M8 x 1.25 Stainless Steel Eyes M10 x 1.5 Stainless
More informationSafety Shock Absorbers
242 Safety Products s Perfect protection for the worst case scenario As a cheaper alternative to the standard shock absorber, Safety shock absorbers are the tried and tested low cost metrhod of preventing
More informationS: With magnet. Bore x stroke (basic type) Cushion P: pneumatic adjustable
series MK Standard cylinders according to ISO 15552 How to order? M K A P S 50 x 100 M: Marani A: Double acting S: With magnet Bore x stroke (basic type) K: According to ISO 15552, Mickey-mouse type Cushion
More informationbar -20 C C ( C for high temperature version) 1000 mm
Technical details Cylinders > piston rod cylinders > ISO 15552, double acting Operating pressure Temperature range Max. stroke Medium Materials 1... 10 bar -20 C... +80 C ( 0... +150 C for high temperature
More informationIndustrial Shock Absorbers MC 33 to MC 64
Industrial Shock Absorbers MC 33 to MC 64 Self-Compensating 36 This range of self-compensating shock absorbers is part of the innovative MAGNUM Series from ACE. You profit from the enhanced product life
More informationTUBUS-Series Type TA
TUBUS-Series Type TA Profile Damper Axial Damping 84 The profile damper type TA from the innovative ACE TUBUS series is a maintenancefree, self-contained damping element made from a special Co-Polyester
More informationSeries 16: ø 8, 10, 12 mm Series 24: ø 16, 20, 25 mm - magnetic Series 25: 16, 20, 25 mm - magnetic, cushioned
> Series 6, 24 and 25 mini-cylinders Series 6, 24 and 25 mini-cylinders Series 6: ø 8, 0, 2 mm Series 24: ø 6, 20, 25 mm - magnetic Series 25: 6, 20, 25 mm - magnetic, cushioned» Single-acting and double-acting»
More informationAluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm
> Series 62 cylinders CATALOGUE > Release 8.6 Series 62 cylinders - Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the
More informationSeries 31 compact cylinders 1/
Series 3 compact cylinders Double and single-acting, double-acting non-rotating, magnetic ø2, 6, 20, 25 mm ø 32, 40, 50, 63, 80, 00 mm UNITOP The compact dimensions allow Series 3 single and double-acting
More informationSingle and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.8 > Series 60 cylinders Series 60 cylinders Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 00, 25mm»»
More informationAluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40%
CATALOGUE > Release 8.7 > Series 6 cylinders Series 6 cylinders - Aluminium profile Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40,
More informationANTI-CORROSIVE CYLINDERS WITH TIE RODS Ø 32 to 125 mm - double acting - ISO with adjustable pneumatic cushioning
ANTI-CORROSIVE CYLINDERS WITH TIE RODS 32 to 125 mm - double acting - ISO 15552 with adjustable pneumatic cushioning NS Series S FEATURES The cylinders are designed for use in corrosive environments: chemical,
More informationCylinders Series 61 - Aluminium profile
CATALOGUE > Release 8. Cylinders Series 6 - Aluminium profile MOVEMENT > Cylinders Series 6 Single, double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00, 25 (ISO 5552)» ISO 5552 (corresponding to
More informationSingle and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.6 > Series 60 cylinders Series 60 cylinders New version Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 00,
More informationSingle-acting and double-acting, magnetic Series 94: ø 16, 20, 25 mm Series 95: ø 25 mm, cushioned
> Series 94 and 95 stainless steel cylinders CATALOGUE > Release 8.7 Series 94 and 95 stainless steel mini-cylinders Single-acting and double-acting, magnetic Series 94: ø 6, 20, 25 mm Series 95: ø 25
More informationDouble and single-acting, double-acting non-rotating, magnetic ø12, 16, 20, 25 mm ø 32, 40, 50, 63, 80, 100 mm UNITOP
CATALOGUE > Release 8.7 > Series 3 cylinders Series 3 compact cylinders Double and single-acting, double-acting non-rotating, magnetic ø2, 6, 20, 25 mm ø 32, 40, 50, 63, 80, 00 mm UNITOP» Compact design»
More informationAluminium tube and profile
> Series 63 cylinders CATALOGUE > 206 Series 63 cylinders - Aluminium tube and profile New Single and double-acting, magnetic, cushioned Versions: standard, low friction, high and low temperatures ø 32,
More informationSingle- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 100 and 125 mm
> Series 90 stainless steel cylinders CATALOGUE > Release 8.8 Series 90 stainless steel cylinders Single- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 00 and 25 mm» In compliance with ISO
More information1.5. 7,250 psi Stainless steel V2A. 7,250 psi Stainless steel V2A. PUR cable type 3 IP 68 Embeddable 600 Hz Table 6 Diagram
43 1 1 14,9 47 1 9 9 7 Max. operating pressure Sensing face HIGH-PRESSURE-RESISTANT P12 see page 7 see page 14 9 Compatible connectors DW-AD-01-P12-39 DW-AD-03-P12-39 DW-AD-01-P12-2 DW-AD-01-P12-27 DW-AS-01-P12-24
More informationStandard Cylinder Series SZ 100
Standard Cylinder Series SZ 100 Maximum operating pressure up to 100 bar Choice of 13 different piston sizes between 12 und 200mm and 23 different attachments Rugged yet compact design with good guiding
More informationFULL COLOR TAB #6 TC 105
FULL COLOR TAB #6 TC 105 SERIES TC 2-STAGE TELESCOPING CYLINDER CONSTRUCTION FEATURES 3 Bore Sizes: 0.75, 1.50 and 2.50 Strokes up to 60 2-Stage Telescoping Space Saving Design 100% Double Action Heavy-Duty
More informationMiniature Float Switches
Miniature Float Switches types 200, 201, 203, 204, 207, 209, 274 + low-priced float switches in miniature construction + long life thanks to a non-contact measuring technique with wear-free Reed contacts
More informationIndustrial Shock Absorbers MC33 to MC64
Industrial Shock Absorbers MC33 to MC64 Self-Compensating 36 This range of self-compensating shock absorbers is part of the innovative MAGUM Series from ACE. You profit from the enhanced product life in
More informationTie-rod Cylinders, ISO 6431, ISO compliant Series 60
Tie-rod Cylinders, ISO 6431, ISO 15552 compliant Series 60 Single or double-acting, magnetic, cushioned Standard and low friction versions ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with ISO 15552
More informationSingle and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm
> Series 97 stainless steel cylinders CATALOGUE > Release 8.7 Series 97 stainless steel cylinders Single and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm»» Clean design»» Stainless steel AISI
More informationRound Body Minicylinders, DIN/ISO 6432 Series 16, 24 and 25
Round Body Minicylinders, DIN/ISO 6432 Series 16, 24 and 25 Series 16: ø 8-10 - 12 bumpers Series 24: ø 16-20 - 25 bumpers and magnetic piston Series 25: ø 16-20 - 25 adjustable cushion and magnetic piston»»
More informationAluminium profile. Double-acting, cushioned, magnetic ø mm
> Series 4 cylinders Series 4 cylinders - Aluminium profile Double-acting, cushioned, magnetic ø 60-200 mm»» In compliance with ISO 643/ VDMA 24562 standards»» Rolled stainless steel rod»» Adjustable pneumatic
More informationStainless Steel Cylinders, ISO 6432, Bore 10-25mm - P1S
This range of stainless steel cylinders has been specially designed for use in difficult environments. Hygienic design, external seals of flourianted rubber and prelubrication with our food-industry-approved
More informationDICTATOR Final Dampers
DICTATOR DICTATOR final dampers are needed to slow down all kinds of rotative or linear movement. Their relatively long strokes offer sufficient saftey distances. The final dampers are available in both
More informationVia Montalbano 28 Loc.Ponte Stella, Serravalle Pistoiese C.A.P Pistoia Tel.0573/ Fax 0573/
TECHNICAL AND DIMENSIONAL CATALOGUE EDITION N 1-04 Via Montalbano 28 Loc.Ponte Stella, Serravalle Pistoiese C.A.P.51034 Pistoia Tel.0573/929163 Fax 0573/929190 E-mail: info@oleodinamicasabatini.it CAT-2004-I.doc
More informationSeries 32 compact magnetic cylinders 1/ Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 100 mm
Series 32 compact magnetic cylinders Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 2287»» Compact design»» Wide range of models available in different
More informationDamping Engineering. Types Functioning of the Dampers. Final Dampers Single and Bi-Directional. Oil Dampers with Fixings on Both Ends
Contents Damping Engineering Types Functioning of the Dampers Page 03.003.00 Final Dampers Single and Bi-Directional Page 03.009.00 Oil Dampers with Fixings on Both Ends Page 03.027.00 High-Performance
More informationAir-Oil Systems, Inc. Gas Springs AGS 15 - AGS 28
Gas Springs GS 15 - GS 28 Gas Springs ontrols gas springs are reliable units designed to handle the demanding needs of the industrial and commercial markets. They are maintenance free and self-contained.
More informationCylinders with integrated guide Series QCTF and QCBF
> Series QCTF - QCBF slide units CATALOGUE > Release 8.6 Cylinders with integrated guide Series QCTF and QCBF Double-acting, magnetic, with double bearings and flanges ø 20, 25, 32, 40 mm Magnetic sensors
More informationT F
T 0134 151 F 0134 445 www.kentgassprings.com A FLEIBLE APPROACH TO GAS SPRINGS STANDARD GAS SPRINGS BESPOKE GAS SPRINGS STEEL or STAINLESS STEEL SHORT PRODUCTION TIMES SMALL or LARGE QUANTITIES GAS SPRING
More informationMagnetic cylinders Series 27 1/ Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm
CATALOGUE > Release 8.5 > Cylinders Series 27 Magnetic cylinders Series 27 Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm»» Reduced dimensions»» Different mounting options»» Perfect alignment, perfect
More informationLarge Bore Extruded Cylinders, ISO 6431 Series 41
Large Bore Extruded Cylinders, ISO 6431 Series 41 Double-acting cushioned, magnetic ø160-200 (DIN/ISO 6431)»» DIN/ISO 6431 VDMA 24562»» Rolled stainless steel rod»» Adjustable cushioning Cylinders Series
More informationGrease Gun Couplers and Lubrication Accessories. Hydraulic Safety-Coupler safelock. MATO 4-Jaw Hydraulic Coupler. MATO 4-Jaw Hydraulic Coupler
Grease Gun Couplers and Lubrication Accessories Description Images and specifications can be subject to change without notice Part No. Hydraulic Safety-Coupler safelock Hydraulic safety-coupler safelock
More informationGas Springs AGS 15 - AGS 28
Gas Springs GS 15 - GS 28 Gas Springs ontrols gas springs are reliable units designed to handle the demanding needs of the industrial and commercial markets. They are maintenance free and self-contained.
More informationSafety Shock Absorbers SCS300 and 650
s SCS300 and 650 60 The safety shock absorber series SCS300 to 650 are based on the innovative technology of the SC² series by ACE. y combining the piston and inner tube, an energy capacity up to 525 m
More informationProportional Pressure Reducing Valve PDM08130
Proportional Pressure Reducing Valve PDM08130 up to 80 bar up to 10 l/min Cartridge valves Control electronics Connection housings 486 1. DESCRIPTION 1.1. GENERAL According to DIN-ISO 1219, HYDAC proportional
More informationExtruded Body Cylinders, ISO 6431, ISO compliant Series 61
1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 61 Single or double-acting, magnetic, cushioned Standard and
More informationSeries 63 ISO cylinders
Series 63 ISO 15552 cylinders New versions Single and double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with the ISO 15552 standard Weight reduced by 25% Low noise More
More informationFor double-acting actuators. Crossover-free switching. Safety function in the event of power failure provided by mechanical return spring
For double-acting actuators 5/ Directional Control Valves Actuation: Electromagnetic Indirect solenoid operation soft seal spool valve Connections G 1/, 1/ NPT, G 1/, NAMUR Interface Crossover-free switching
More informationStainless steel gas springs with stainless steel hand operated blocking valve. Allows the Gas spring to be stopped in any position by turning wheel.
Blocking Gas Springs Series 10-23 and 10-28 with valve Page 6-10 Stainless steel gas springs with stainless steel hand operated blocking valve. Allows the Gas spring to be stopped in any position by turning
More informationIndustrial Shock Absorbers
48 Automation Control Indutrial Shock Aborber Aborber to uit for all load ACE indutrial hock aborber work hard. Their application mean moving load are evenly decelerated over the full troke. The reult:
More informationCONTI Sleeve Type Air Spring
ContiTech Luftfedersysteme GmbH Edition: 2003-03-31 SK 19-4 0,16 0,14 0,12 vibration isolation: 45 mm Use in dotted range >56 mm only 1,6 1,4 1,2 0,10 8 6 4 2 0 65 60 55 50 45 40 35 30 H max =63 H min
More informationBlock feeder SPVS Used in oil or grease lubrication systems
1-3029-EN Block feeder SPVS Used in oil or grease lubrication systems Block feeders of the SPVS series are used in grease and oil total loss lubrication systems. They are used to either increase the number
More informationISO CYLINDERS Ø ACTUATORS
ISO 15552 CYLINDERS Ø 250-320 1 Cylinders made to ISO 15552 available in various versions and with a wide range of accessories: double-acting single-or through-rod with or without cushioning configuration
More informationAIR CYLINDER Series A25, A26
A25 - Magnetic A26 - Non-magnetic S Double End Double Acting - Ø32-100 mm As per ISO 15552 / VDMA 24562 standards Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings.
More informationantriebstechnik ELA Electromechanical Linear Actuator
D antriebstechnik ELA Electromechanical Linear Actuator Electromechanical Linear Actuators ELA Electromechanical Linear Actuators (ELA) consist of trapezoidal or ball screws driven by an electric motor
More informationAluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm
> Cylinders Series 62 CATALOGUE > Release 8.5 Cylinders Series 62 Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the previous
More informationBlock feeder SPVS Used in oil or grease lubrication systems
1-3029-EN Block feeder SPVS Used in oil or grease lubrication systems Block feeders of the SPVS series are used in grease and oil total loss lubrication systems. They are used to either increase the number
More informationTH23 POWER HOOK Spare Parts Manual
TH23 POWER HOOK Spare Parts Manual For spares and service support & the latest service network listings refer to www.edbro.com Spares Tel: +44 (0) 120 4902319 Spares fax: +44 (0) 120 4393561 Service Tel:
More informationLevel Limit Switch liquiphant FTL 360 / FTL 361
Technical Information TI 184F/00/en evel imit Switch liquiphant FT 360 / FT 361 evel limit switch iquiphant II with vibrating probe. For all types of liquid. iquiphant level limit switch: FT 360, compact
More informationAutomation Control Equipment. Damping Technology. ACE: Your partner for industrial shock absorbers, hydraulic dampers and vibration control
Automation Control Equipment Damping Technology ACE: Your partner for industrial shock absorbers, hydraulic dampers and vibration control Extract from Main Catalogue 206 Complete Product Range Data Sheets
More informationAIR CYLINDER Series A75, A76
A76 - n-magnetic A75 - Magnetic AIR CYLINDER Round s - Ø32, 40, 50 and 63 mm Double Acting with Adjustable Cushioning Features Available in magnetic and n magnetic version Adjustable cushioning at both
More informationUSE AN ENGINEERED APPROACH TO TAILOR A PERFECT STANDARD GAS SPRING FOR YOUR DESIGN A GUIDE TO GAS SPRING DESIGN AND CUSTOMIZATION WH ITE PA P E R
WH ITE PA P E R USE AN ENGINEERED APPROACH TO TAILOR A PERFECT STANDARD GAS SPRING FOR YOUR DESIGN A GUIDE TO GAS SPRING DESIGN AND CUSTOMIZATION When your machine design calls for an industrial gas spring,
More informationLPRA/182000/M Double acting profile cylinders Ø mm
Double acting profile cylinders 32... 125 mm High performance, stability and reliability M/50 switches (solid state) can be mounted flush with the profile Cylinders and mountings conform to ISO 15552 (ISO
More informationDouble acting, cushioned, magnetic Ø mm
CATALOGUE > Release 8.7 > Series 40 cylinders Series 40 cylinders Double acting, cushioned, magnetic 60-200 - 250-320 mm In compliance with ISO 5552 standards and with the previous DIN/ISO 643 - VDMA 24562
More informationOur policy is one of continued research and development. We therefore reserve the right to amend,
Airmotor (Oscillator) with integrated switches Double acting Ø 50... 100 mm Complete functional unit for oscillating movement Conforms to ISO 6431 and VDMA 24562 Integrated 5/2 valve Frequency and speed
More informationAIR CYLINDER Series A23, A24
A23 - Magnetic A24 - Non-magnetic Double Acting s (Square type) Ø32-125 mm As per ISO 15552 / VDMA 24562 standards. Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings
More informationPAH, PAHT, PAHT G pumps PAH , PAHT and PAHT G Disassembling and assembling
Servie guide PAH, PAHT, PAHT G pumps PAH 10-12.5, PAHT 10-12.5 and PAHT G 10-12.5 Disassembling and assembling hpp.danfoss.com Table of Contents 1. Disassembling the pump...3 2. Inspection...7 2.1. Port
More informationAIR CYLINDER Series A12, A13
A12 - Non magnetic A13 - Magnetic S Double Acting ( Ø32-100 ) mm As per ISO 6431 / CETOP RP43P, RP53P standards Features Adjustable cushioning at both ends Wide varieties of mountings Low friction Long
More informationAir Cylinders. Fine Quality. Precision Engineered. Advanced Design. Excellent Prices S T C. Tel:
Air Cylinders Precision Engineered Fine Quality Excellent Prices Advanced Design connects fluid power to industrial automation Tel: 650-856 8833 www.stcvalve.com H1 83 Contents Air Cylinder Numbering System
More informationRepair instruction for HYDRAULIC DRIVE UNITS HA1ES / HA \r04eng 0697
Repair instruction for HYDRAULIC DRIVE UNITS HA1ES / HA2 Contents list page Safety rules General instructions 1 Operating faults and how to clear them 2 Replacement parts lists 31070 HA1ES 4 31375 HA2
More informationRM/57200/M, RT/57200/M
Roundline Cylinders Magnetic Piston Double Acting Ø 8 to 63 mm Three different basic versions provide flexibility and wide range of application Magnetic piston as standard provides a wide range of control
More informationHinge cylinders DW Key features
Key features At a glance Hinge cylinder for clamping components during the welding process Easy assembly thanks to swivel bearing on the bearing cap Integrated flow control Integrated end-position cushioning
More informationDouble-acting, magnetic, guided ø 10x2, 16x2, 20x2, 25x2, 32x2 mm
CATALOGUE > Release 8.8 > Series QX twin rod cylinders Series QX twin cylinders Double-acting, magnetic, guided ø 0x2, 6x2, 20x2, 25x2, 32x2 mm High force Precise movement Integrated guide QXB: linear
More informationPRA/181000, PRA/181000/M PRA/183000, PRA/183000/M
PA/181000, PA/181000/M PA/183000, PA/183000/M Profile barrel with concealed tie rods Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic Piston Single Acting 32 to 100 mm
More informationP1A Pneumatic Mini ISO Cylinders
P1A Pneumatic Mini ISO Cylinders According to ISO 6432 The P1A range of cylinders is intended for use in a wide range of applications. The cylinders are particularly suitable for lighter duties in the
More informationPMFO AIR/OIL SYSTEM PMFO AIR-OIL PROGRESSIVE MODULAR LUBRICATING SYSTEMS
AIR/OIL SYSTEM AIR-OIL PROGRESSIVE MODULAR LUBRICATING SYSTEMS (BLUE COLOUR ALUMINIUM BASE) The basic design of this system is similar to the PMF progressive, but with the inclusion of airways to enable
More informationBore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2
6 S E R I E S Cylinders Series 6 Catalog 2006 Single, double acting, magnetic (DIN/ISO 643) Bore: ø 32, 40, 50, 63, 80, 00, 25 cushioned [ /4, 9/6, 2, 2 /2, 3 /8, 4, 5 inch approximations] The Series 6
More informationElectric Lifting Cylinder TV / KV 5 XE Load up to N
S+R S+R automation systems GmbH Electric Lifting Cylinder TV / KV 5 XE Load up to 6.500 N Lifting Moving Positioning Design and functuion An electric lifting cylinder is an electro-mechanical drive unit.
More informationRA 320 IBC Battery. As at: 01/15/10 Time:17:04
Battery As at: 01/15/10 Time:17:04 Battery As at: 01/15/10 Time:17:04 Pos. Description Reference 01 Covering of battery 320.265 02 Battery 320.091 03 P...484 WA 04 P...485 PA 05 Battery container 320.261
More informationPNEUMATIC CYLINDERS CYLINDERS ISO solutions SERIES 21 SERIES 21 CYLINDERS ISO 15552
PNEUMATIC CYLINDERS 1 2 3 4 SERIEs 21- General Information 32-100 mm diameter 21 series cylinders are manufactured to ISO 15552 standard which specifies interchangeable mounting dimensions. The cylinder
More informationKuhnke Technical Data. Contact Details
Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have
More informationEUGEN WOERNER GmbH & Co. KG Postfach 1661 DE Wertheim Hafenstrasse 2 DE Wertheim. Progressive distributor VPB
Progressive distributor VPB Use: In progressive mode based central lubrication systems. The main features of WOERNER progressive distributors are as follows: Accurate proportioning volumes. different proportioning
More informationStrokes Strokes Double acting. Min. stroke with 2 sensors Ø Single acting. Single acting
S version Type... Standards... Cushioning... Rated temperature... Fluid... Working pressure... Proximity switch... Mounting and accessories... Materials... Single and double acting pneumatic microcylinders,
More informationCATALOG. 2/2 - Way Angle Seat Valves SMART IN FLOW CONTROL.
CATALOG / - Way Angle Seat Valves SMART IN FLOW CONTROL. Description and Features The SED Angle Seat Valve is composed of a /-way angle seat valve body and a pneumatically operated piston actuator, which
More informationshroud manipulator for ContinUous Casting Plants
shroud manipulator for ContinUous Casting Plants en - shroud Manipulator for ContinUous Casting Plants The Shroud Manipulator is built to achieve an easy handling of the shroud. It enables the user to
More informationOverview of Profi le Dampers TR/TR-L
TUBUS-Series Overview of Profi le Dampers Physical Properties of TUBUS Profile Dampers Energy Capacity per unit weight Operating Lifetime PUR Rubber Gummi TUBUS Energy Capacity per unit volume ACE TUBUS
More informationPneumatic cylinders, piston-ø mm Double acting with magnetic piston DIN ISO 15552
Pneumatic cylinders, piston-ø 32 100 mm Double acting with magnetic piston DIN ISO 15552 Technical data for series SL 050 450 Order code SL-032-0250-050 Series Piston-Ø Stroke length (mm) Type of cylinder
More information