Rod ends, series K (wide version), internal and external thread. Rod ends, series E (slim version), internal and external thread

Size: px
Start display at page:

Download "Rod ends, series K (wide version), internal and external thread. Rod ends, series E (slim version), internal and external thread"

Transcription

1 Ro Ens an Spherical earings Overview Ro ens, series K (wie version), internal an external threa Page Maintenance free, plastic Ø 5-20mm... Lubricateable (S), steel Ø 2-40mm... Maintenance free (T), steel Ø 4-40mm... Maintenance free (T-R), stainless steel Ø 5-40mm... With ball bearing (R), steel Ø 6-30mm... With ball bearing (R-R), stainless steel Ø 6-20mm Ro ens, series E (slim version), internal an external threa Maintenance free (EW, AW), steel Ø 6-80mm... Page 465 Ro Ens, special sizes (meium wie version), internal threa With ball bearing, steel, internal threa (PF), Ø 10-20mm... Page 468 Spherical bearings, series K (wie version) Page Lubricateable, steel an stainless steel Ø 5-40mm Lubricateable, with outer ring, steel Ø 5-40mm Lubricateable, with outer ring, stainless steel Ø 5-40mm Maintenance free, steel an stainless steel Ø 5-40mm Maintenance free, with outer ring, steel Ø 5-40mm Maintenance free, with outer ring, stainless steel Ø 5-40mm Spherical bearings, series E (slim version) Page Lubricateable, steel Ø 6-80mm Maintenance free, steel Ø 6-80mm Maintenance free, stainless steel Ø 6-80mm

2 Ro Ens an Spherical earings, asics Loa Capacity of Ro Ens an Spherical earings mae from steel Raial loa: The loa rating epens on the loa case: Loa case I (stationary or static loa): Loa rating like table 1. Loa case II (fluctuating or simple ynamic loa): Loa rating like table 2. Attention for types T an T-R: Loa ratings from table 1 may not be exceee. Loa case III (alternating or shock loa): The loa rating epens highly on the real kin of application an use. We recommen 50% of the loa rating from table 2. Axial loa: The axial force may not excee 20 % of the raial loa. Table 1: Static Loa Rating C o in kn for Loa Case I ore Diameter of Ro En Ro Ens with Internal Threa Ro Ens with External Threa Spherical bearings mm S T T-R EW S T T-R AW S S D D E DO E UK , , , , , ,9 8 11,8-4,3 4,3 6, ,5 19,8 12, ,9 8,9 13,1 10, ,8 6,9 12,8 15,5 25,8 15, ,1 14,1 20,7 15, ,1 12,7 21,6 27,8 42,6 27,8 27,5 14, ,4 19,3 28,3 23,4 17,4 17,4 25,5 19, ,5 21, ,5 34, ,5 23,5 34, , , , , ,5-24,5 20,8 39,5-51, , , , ,5 54,5 36, , , , , , , ,5 106, , , ,5 49,5 43, ,5 94, , , , , Table 2: Dynamic Loa Rating C in kn for Loa Case II ore Diameter of Ro En Ro Ens with Internal Threa Ro Ens with External Threa Spherical bearings mm S T T-R EW S T T-R AW S S D D E DO E UK 2 1, , , , , , ,5 7,5 7,5-2,5 7,5* 7,5* - 2,5 7,5 3,3 7, ,2 9,3* 9,3 3,6 3,2 9,3* 9,3* 3,6 3,2 9,3 4,3 9,3 3,4 3,6 8 5,4 16,7* 16,7 5,8 5,4 16,7* 16,7* 5,8 5,4 16,7 7,1 16,7 5,5 5,8 10 7,5 23,4* 23,4 8,6 7,5 23,4* 23,4 8,6 7,5 23, ,4 8,1 8, * 32 11, * 32 11, , ,8 11, * 42* * 42* , , , ,5* 52,5 22, ,5* 52,5 22, ,5 21,5 62,5 21, , , , ,5 64* 64-19,5 64* 64* - 19, ,5 78* 78 31,5 23,5 78* 78 31,5 23, , * * * 122* * 122* * 168* * 168* * 206* * 206* * 286* * 286* * Attention: The static loa rating is lower. The ynamic loa ratings are calculatet for the bearing, to be use for further calculations. The static loa ratings from table 1 may not be exceee. 459

3 Ro Ens an Spherical earings, asic Informations Permissible Spee of the Inner Ring for Ro Ens an Spherical earings mae from steel The effective etermination of the maximum rotational spee epens on various factors an variables which cannot all be preefine by the manufacturer. a) Loa. b) Loaing case (I,II an III). c) Type of lubrication (central lubrication system etc.). ) Ambient temperature. e) Environmental influences (ust etc.). For the aforementione reasons the manufacturer cannot etermine any explicit, general values for the maximum spee of the inner ring. The values in the table were calculate assuming favourable conitions. Ro ens DIN series E (EW an AW) an spherical bearings DIN series E (E DO an E UK) are not suitable for higher spees (only for alternating loa). Ro En-ores Ro Ens Spherical earings S T** T-R** S S D** D** min -1 min -1 min -1 min -1 min -1 min -1 min * Sizes 2, 3 an 4 mm an S external threa 5 mm are not suitable for higher spees. ** Spees state are for short-term rotary operation (not suitable for permanent rotary operation). Tolerances for Ro Ens an Spherical earings all ores Series K: ore tolerance H7. Matching shaft: g6 recommene. Series E: ore tolerance 0/-8µ. Matching shaft: g7 recommene. Outer iameter of the spherical bearing Series K: Tolerance h6. Housing tolerance J7 recommene. Series E: Tolerance h5. Housing tolerance JS7 recommene. Threa Metric threa accoring to DIN 13. All external threa are rolle for high strength. Lubrication All ro ens an spherical bearings, wich are not eclare as maintenance-free, must be lubricate. An initial lubrication before use is require. ut maintenance-free parts must not be lubricate. We recommen the following lubrication intervals: If the system runs at full spee uring the phase of startup wear, i.e., uring the first 5 operating ays, running 8 hours per ay, an in a irty operating environment, i.e., uner unfavourable ambient conitions, the unit shoul be lubricate twice a ay. With oscillating motion once to twice a week. With higher temperatures possibly once or twice a ay. We recommen high quality grease with Molykote or graphite ingreiant. Tilting Angle Max. tilting angle: the tilting angles state in the table relate to the maximum permissible misalignment of the shaft axis towars the bearing 460

4 Thermoplastic Ro Ens igubal KCRM an KCLM similar to DIN (DIN 648) series K, Internal Threa Material spherical ball: igliur W300, yellowish. Material housing: igumi, black. Maintenance-free, silent running an anti-vibrating. High strength at very low weight. Resistant against corrosion an many chemicals. Electrical an thermal isolating. The counter part must rotate insie the bore of the spherical ball. With a metal bolt, a sliing spee up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. IR = Internal Right-han threa. IL = Internal Left-han threa. l 3 C1 W 2 h 1 Orering Details: e.g.: Prouct No , Ro En igubal KCRM, 5mm Threa Tilting Loa Rating* Weight Prouct No. Prouct No. angle raial axial KCRM KCLM E10 2 h 1 l 3 W α static static IR IL mm mm mm mm mm mm mm mm N N g M5 SW , ,5 M6 SW , M8 SW , , M10 SW , F F , M10x1,25 SW , M12 SW F F M12x1,25 SW M16 SW F F M16x1,5 SW M20 SW F F M20x1,5 SW * At short term, the raial loa may be twice as high. Other versions or sizes on request. 461

5 Heavy-Duty Ro Ens S DIN (DIN 648) Series K, Internal Threa Material internal ring: Roller bearing steel 100Cr6, harene HRC 62 ±1, groun an polishe. Material outer part: ores 6-12 mm, free cutting steel, turne, bores mm C22 forge, zinc-plate. Material bearing race: Special brass CuZn40Al1. Normal bearing clearance: µ at a measuring loa of 100 N. Sliing spees up to 60 m/min. Steel on high-uty bronze, thus high raial an axial alternating loas. Loa tables pages Initial lubrication before use is require! IR = Internal-Right han threa. IL = Internal Left-han threa. l 3 W h 1 Orering Details: e.g.: Prouct No , Ro En S, IR Threa ISO Tilting Weight DIN 13 6H angle Prouct No. Prouct No. H7-0.1 C ± h 1 l W α IR IL mm mm mm mm mm mm mm mm mm mm mm g * * 2 4,5 3,6 2,6 9 3,8 4, M * * 3 6 4,5 5, , M3 5, , M ,75 8, M , , M ,5 12, M , , M ,5 16, M , M ,5 21, M18x1, , , M20x1, , M22x1, , , M24x , M30x , M36x , M42x * Up to size 3 without grease nipple. Heavy-Duty Ro Ens S DIN (DIN 648) Series K, External Threa Material internal ring: Roller bearing steel 100Cr6, harene HRC 62 ±1, groun an polishe. Material outer part: ores 6-12 mm, free cutting steel, turne, bores mm C22 forge, zinc-plate. Material bearing race: Special brass CuZn40Al1. Normal bearing clearance: µ at a measuring loa of 100 N. Sliing spees up to 60 m/min. Steel on high-uty bronze, thus high raial an axial alternating loas. Loa tables pages Initial lubrication before use is require! AR = External Right-han threa. AL = External Left-han threa. l h Orering Details: e.g.: Prouct No , Ro En S, AR Threa ISO Tilting Weight DIN 13 6H angle Prouct No. Prouct No. H7-0.1 C ± h l α AR AL mm mm mm mm mm mm mm mm g * * 2 4,5 3,6 2, M * * 3 6 4,5 5, M * * , M ,75 8, M , M ,5 12, M , M ,5 16, M , M ,5 21, M18x1, , M20x1, , M22x1, , M24x , M30x , M36x , M42x * Up to size 5 without grease nipple. 462

6 Heavy-Duty Ro Ens T DIN (DIN 648) Series K, Maintenance Free, Internal Threa Material internal ring: Roller bearing steel 100Cr6, harene HRC 62 ±1, groun an polishe. Material outer part: ores 6-12 mm, free cutting steel, turne, bores mm C22 forge, zinc-plate. Material bearing race: Free cutting steel with PTFE-lining. For high, raial an axial alternating loas. Sliing spees up to 10 m/min. Loa tables pages IR = Internal Right-han threa. IL = Internal Left-han threa. Orering Details: e.g.: Prouct No , Ro En T, IR l 3 W h 1 Threa ISO Tilting Weight DIN 13 6H angle Prouct No. Prouct No. H7-0.1 C ± h 1 l W α IR IL mm mm mm mm mm mm mm mm mm mm mm g ,25 6,5 14 7,8 9, M , M ,75 8, M , , M ,5 12, M , , M ,5 16, M , M ,5 21, M18x1, , , M20x1, , M22x1, , , M24x , M30x , M36x , M42x Heavy-Duty Ro Ens T DIN (DIN 648) Series K, Maintenance Free, External Threa Material internal ring: Roller bearing steel 100Cr6, harene HRC 62 ±1, groun an polishe. Material outer part: ores 6-12 mm, free cutting steel, turne, bores mm C22 forge, zinc-plate. Material bearing race: Free cutting steel with PTFE-lining. For high, raial an axial alternating loas. Sliing spees up to 10 m/min. Loa tables pages AR = External Right-han threa. AL = External Left-han threa. l h Orering Details: e.g.: Prouct No , Ro En T, AR Threa ISO Tilting Weight DIN 13 6H angle Prouct No. Prouct No. H7-0.1 C ±0, h l α AR AL mm mm mm mm mm mm mm mm g ,25 6, M , M ,75 8, M , M ,5 12, M , M ,5 16, M , M ,5 21, M18x1, , M20x1, , M22x1, , M24x , M30x , M36x , M42x

7 Heavy-Duty Ro Ens T-R DIN (DIN 648) Series K, Maintenance Free, Stainless Steel, Internal Threa Material: Ro En: Stainless steel (forge piece) Threa rolle, surface clear staine. all: Stainless steel , harene, all sies groun, bearing surface super finish. earing Shell: Stainless steel with PTFE-lining. Tolerances an loa tables page IR = Internal Right-han threa. IL = Internal Left-han threa. 1 2 h 1 l 3 W 3 4 Orering Details: e.g.: Prouct No , Ro En T-R, IR Stainless Threa ISO Tilting Weight DIN 13 6H angle Prouct No. Prouct No. H7-0.1 C ± h 1 l W α IR IL mm mm mm mm mm mm mm mm mm mm mm g , M ,75 8, M , , M ,5 12, M , , M ,5 16, M , M ,5 21, M18x1, , , M20x1, , M22x1, , , M24x , M30x , M36x , M42x Heavy-Duty Ro Ens T-R DIN (DIN 648) Series K, Maintenance Free, Stainless Steel, External Threa Material: Ro En: Stainless steel (forge piece) Threa rolle, surface clear staine. all: Stainless steel , harene, all sies groun, bearing surface super finish. earing Shell: Stainless steel with PTFE-lining. Tolerances an loa tables page AR = External Right-han threa. AL = External Left-han threa. l h Orering Details: e.g.: Prouct No , Ro En T-R, AR Stainless Threa ISO Tilting Weight DIN 13 6H angle Prouct No. Prouct No. H7-0.1 C ±0, h l α AR AL mm mm mm mm mm mm mm mm g , M ,75 8, M , M ,5 12, M , M ,5 16, M , M ,5 21, M18x1, , M20x1, , M22x1, , M24x , M30x , M36x , M42x Threae bars with metric threa an fine threa page 510. Loctite threa locking an boning proucts page

8 Ro Ens EW DIN (DIN 648) Series E, Maintenance Free, Internal Threa Material: Housing: up to size 10 free cutting steel 9SMnPb28K, turne, from size 12 heat-treate steel C45, forge. earing: maintenance-free steel/ptfe bearing. Tribological pairing: har chrome - steel/ptfe Tolerances an loa tables page Application: For pivoting motions (alternating loa). Not for higher spees. IR = Internal Right-han threa. IL = Internal Left-han threa. K 2 Orering Details: e.g.: Prouct No , Ro En EW, IR l 3 3 W 4 h 1 Threa ISO Tilting Weight DIN 13 6H angle Prouct No. Prouct No K h 1 l 3 W α IR IL mm mm mm mm mm mm mm mm mm mm mm g , M , M M , M M M M , M20x1, , , M24x , M30x M36x M39x M42x M45x M52x M56x M64x Ro Ens AW DIN (DIN 648) Series E, Maintenance Free, External Threa Material: Housing: up to size 10 Free cutting steel 9SMnPb28K, turne, from size 12 heat-treate steel C45, forge. earing: maintenance-free steel/ptfe bearing. Tribological pairing: har chrome - steel/ptfe. Tolerances an loa tables page Application: For pivoting motions (alternating loa). Not for higher spees. AR = External Right-han threa. AL = External Left-han threa. K 2 l 1 h Orering Details: e.g.: Prouct No , Ro En AW, ER Threa ISO Tilting Weight DIN 13 6H angle Prouct No. Prouct No. 2 K h l 1 α AR AL mm mm mm mm mm mm mm mm g , M M M M M M M M20x1, , M24x , M30x M36x M39x M42x M45x M52x M56x M64x Threae bars with metric threa an fine threa page 510. Loctite threa locking an boning proucts page

9 Heavy-Duty Ro Ens R with Spherical earing DIN (DIN 648) Series K, Internal Threa Material ro en: Alloye, case-harene steel (forge piece) quenche an tempere, bearing race harene, groun an lappe. Threa rolle/cut, surface zinc-plate an chromatise. Material inner ring: earing steel harene, precisely hone. Lubricant: Calcium-complex grease (-20ºC to +120ºC). If require special lubricants. Ro en with low friction ball bearing, long-term lubricate, seale with cover plates, with high loa rating. IR = Internal Right-han threa. IL = Internal Left-han threa. l h 1 Orering Details: e.g.: Prouct No , Ro En R, IR Prouct No. Prouct No. H7-0, h 1 l 3 α ynam. static Factors* n max IR IL mm mm mm mm mm mm mm mm mm C C 0 Y Y 0 min -1. g , M6 8 2,8 0,65 2,09 2, , M8 8,5 4,0 1,0 1,8 1, , M10 8 4,5 1,5 1,9 1, , M12 7,5 5,0 1,8 1,74 1, , M14 6 5,6 2,0 2,36 2, M16 8 6,3 2,4 2,24 2, , M18x1,5 8,5 7,1 2,9 2,21 2, , M20x1,5 7 7,9 3,5 2,46 2, M22x1,5 8 9,3 4,0 2,35 2, M24x2 5 11,0 5,7 2,02 2, M30x2 7,5 14,2 7,5 2,24 2, * Calculation see page 468. Loa Rating [kn] Calculation Spee Weight Heavy-Duty Ro Ens R with Spherical earing DIN (DIN 648) Series K, External Threa Material ro en: Alloye, case-harene steel (forge piece) quenche an tempere, bearing race harene, groun an lappe. Threa rolle/cut, surface zinc-plate an chromatise. Material inner ring: earing steel harene, precisely hone. Lubricant: Calcium-complex grease (-20ºC to +120ºC). Special grease if require. asically without friction, long-term lubrication, seale with cover plates, offer small imensions, large pivoting angle an high loa rating. AR = External Right-han threa. AL = External Left-han threa. 2 l 1 h Orering Details: e.g.: Prouct No , Ro En R, AR Loa Rating [kn] Calculation Spee Weight Prouct No. Prouct No. H7-0,1 2 h l 1 α ynam. static Factors* n max AR AL mm mm mm mm mm mm mm C C 0 Y Y 0 min -1. g , M6 8 2,8 0,65 2,09 2, M8 8,5 4,0 1,0 1,8 1, , M10 8 4,5 1,5 1,9 1, M12 7,5 5,0 1,8 1,74 1, , M14 6 5,6 2,0 2,36 2, M16 8 6,3 2,4 2,24 2, , M18x1,5 8,5 7,1 2,9 2,21 2, M20x1,5 7 7,9 3,5 2,46 2, M22x1,5 8 9,3 4,0 2,35 2, M24x2 5 11,0 5,7 2,02 2, M30x2 7,5 14,2 7,5 2,24 2, * Calculation see page 468. Threae bars with metric threa an fine threa page 510. Loctite threa locking an boning proucts page

10 Heavy-Duty Ro Ens R-R with Spherical earing DIN Series K, Stainless Steel, Internal Threa Material ro en: Stainless steel, forge, harene. earing race superfinishe. Material inner ring an rollers: Stainless steel, harene, superfinishe. Lubricant: Aluminium-complex-soap-grease, approval accoring to USDA H1, -45ºC to +120ºC. If require special lubricants. asically without friction, long-term lubrication, seale with cover plates, offer small imensions, large pivoting angle an high loa rating. IR = Internal Right-han threa. IL = Internal Left-han threa. l h 1 Orering Details: e.g.: Prouct No , Ro En R-R, IR Prouct No. Prouct No. H7-0, h 1 l 3 α ynam. static Factors* n max IR IL mm mm mm mm mm mm mm mm mm C C 0 Y Y 0 min -1. g , M6 8 1,9 0,5 2,09 2, , M8 8,5 2,8 0,7 1,8 1, , M10 8 3,1 1,0 1,9 1, , M12 7,5 3,5 1,3 1,74 1, M16 8 4,3 1,6 2,24 2, , M20x1,5 7 5,4 2,3 2,46 2, * Calculation see page 468. Loa Rating [kn] Calculation Spee Weight Heavy-Duty Ro Ens R with Spherical earing DIN Series K, Stainless Steel, External Threa Material ro en: Stainless steel, forge, harene. earing race superfinishe, threa rolle. Material inner ring an rollers: Stainless steel, harene, superfinishe Lubricant: Aluminium-complex-soap-grease, approval accoring to USDA H1, -45ºC to +120ºC. If require special lubricants. asically without friction, long-term lubrication, seale with cover plates, offer small imensions, large pivoting angle an high loa rating. AR = External Right-han threa. AL = External Left-han threa. l 1 2 h Orering Details: e.g.: Prouct No , Ro En R-R, AR Loa Rating [kn] Calculation Spee Weight Prouct No. Prouct No. H7-0,1 2 h l 1 α ynam. static Factors* n max AR AL mm mm mm mm mm mm mm C C 0 Y Y 0 min -1. g , M6 8 1,9 0,5 2,09 2, M8 8,5 2,8 0,7 1,8 1, , M10 8 3,1 1,0 1,9 1, M12 7,5 3,5 1,3 1,74 1, M16 8 4,3 1,6 2,24 2, M20x1,5 7 5,4 2,3 2,46 2, * Calculation see page 468. Threae bars with metric threa an Fine threa page 510. Loctite threa locking an boning proucts page

11 Heavy-Duty Ro Ens PF with Integral Spherical earing Material ro en: Alloye, case-harene steel (forge) quenche an tempere, bearing race harene, groun an lappe. Threa rolle/cut, surface zinc-plate an chromatise. Material inner ring: earing steel harene, precisely turne. Lubricant: Calcium-complex grease (-20ºC to +120ºC). Special grease if require. l 7 2 Short esign with internal threa. h 1 Threae bars with metric ISO threa an ISO fine threa page 510. IR = Internal Right-han threa. IL = Internal Left-han threa. l 3 3 Orering Details: e.g.: Prouct No , Ro En PF earing loas [kn] Calculation- Spee Weight Prouct No. Prouct No. 1) 1 h h 1 l 3 l 7 α ynam. static Factors IR IL mm mm mm mm mm mm mm mm mm C C 0 Y Y 0 n max. g ,5 M8 7 2,6 1,0 1,90 1, , M12 7 5,0 1,9 2,30 2, , M16 6,5 6,1 3,0 2,34 2, ) Tolerance DIN 620. * in min -1 Inner Rings - Tolerances DIN 620 Nominal imension range of the bore Tolerance 1 mm in µm above up to min. max. 0,6 2, , Rough Calculation for Ro Ens/all earing Type β = half the pivoting angle in º C = ynamic loa rating in N C 0 = static loa rating in N F a = axial loa in N (F a 0.2 F r ) F r = raial loa in N n = spee or pivoting frequency in min -1 P = ynamic equivalent raial loa in N (for self-aligning ball bearing P = F r + Y. F a ) (for self-aligning roller bearing P = F r F a ) P 0 = Static equivalent raial loa in N (for self-aligning ball bearing P 0 = F r + Y. 0 F a ) (for self-aligning roller bearing P 0 = F r + 5. F a ) Y = axial factor, ynamic Y 0 = axial factor, static Nominal Service Life L n (n) Rotating: Oscillating: ( ) z C P Lh rot = 10 6 [h] 60. n ( C ) z 3 β P 90 Lh osz. = 10 6 [h] 60. n z = 3 for self-aligning ball bearing z = 3.33 for self-aligning roller bearing Conitions: Pivoting angle β 3º For pivoting angle β < 3º we recommen the use of ro ens with slie bearings. Static loa stationary: P 0 C 0 [N] 468

12 Spherical earings Series K, Steel or Stainless Steel, re-lubricateable Material stanar: Inner ring bearing steel 100Cr6, harene, groun an polishe. earing shell special bronze CuSn8. Material stainless: Inner ring stainless steel , harene, groun an polishe. earing shell special bronze CuSn8. DIN (DIN 648), series K (wie shape). Re-lubricateable (from size 6 with lubrication hole). Initial lubrication before use is require. Suitable for higher spees. Without aitional outer ring. C 1 Version D Orering Details: e.g.: Prouct No , Spherical earing, Series K, Steel, re-lubricateable, 5mm Prouct No. Prouct No. H7-0,1 C -0,1 D -0,012 1 α ynam. static n max Stanar Stainless mm mm mm mm mm C C 0 min -1. g * ,7 13 3,3 19, , ,9 13 4,3 25, ,4 14 7,1 42, , , , , , , , , , , , , , , , , , * Without lubrication bore. Loa Rating [kn] Spee Weight Spherical earings Series K, Steel or Stainless Steel, re-lubricateable, with Outer Ring Material stanar: Inner ring bearing steel 100Cr6, harene, groun an polishe. earing shell special bronze CuSn8. Outer ring steel 9SMnPb28K, zinc plate. Material stainless: Inner ring stainless steel , harene, groun an polishe. earing shell special bronze CuSn8. Outer ring stainless steel DIN (DIN 648), series K (wie shape). Re-lubricateable, initial lubrication before use is require. Suitable for higher spees. With aitional outer ring. C 1 Version S D A Orering Details: e.g.: Prouct No , Spherical earing, Series K, Steel, re-lubricateable, with Outer Ring, 5mm Loa Rating [kn] Spee Weight Prouct No. Prouct No. H7-0,1 C -0,1 D -0,012 A 1 α ynam. static n max Stanar Stainless mm mm mm mm mm C C 0 min -1. g ,7 13 3,3 19, , ,9 13 4,3 25, ,4 14 7,1 42, , , , , , , , , , , , , , , , , ,

13 Spherical earings Series K, Steel or Stainless Steel, maintenance-free Material stanar: Inner ring bearing steel 100Cr6, harene, groun an polishe. earing shell steel 9SMnPb28K, zinc plate, with PTFE-lining. Material stainless: Inner ring stainless steel , harene, groun an polishe. earing shell stainless steel , with PTFE-lining. DIN (DIN 648), series K (wie shape). Maintenance-free. Suitable for high ynamic loas. Without aitional outer ring. C 1 Version..D D Orering Details: e.g.: Prouct No , Spherical earing, Series K, Steel, maintenance-free, 5mm Loa Rating [kn] Spee Weight Prouct No. Prouct No. H7-0,1 C -0,1 D -0,012 1 α ynam. static n max Stanar Stainless mm mm mm mm mm C C 0 min -1. g ,7 13 7,5 12, , ,9 13 9,3 15, , ,7 27, , , , , , , , , , , , , , , , , , Spherical earings Series K, Steel or Stainless Steel, maintenance-free, with Outer Ring Material stanar: Inner ring bearing steel 100Cr6, harene, groun an polishe. Outer ring an bearing shell steel, zinc plate. With PTFE-lining. Material stainless: Inner ring stainless steel , harene, groun an polishe. earing shell stainless steel with PTFE-lining. Outer ring stainless steel DIN (DIN 648), series K (wie shape). Maintenance-free. Suitable for high ynamic loas. With aitional outer ring. C 1 Version S..D D A Orering Details: e.g.: Prouct No , Spherical earing, Series K, Steel, maintenance-free, with Outer Ring 5mm Loa Rating [kn] Spee Weight Prouct No. Prouct No. H7-0,1 C -0,1 D -0,012 A 1 α ynam. static n max Stanar Stainless mm mm mm mm mm C C 0 min -1. g ,7 13 7,5 12, , ,9 13 9,3 15, , ,7 27, , , , , , , , , , , , , , , , , ,

14 Spherical earings Series E, Steel, re-lubricateable Material: Inner ring an bearing shell from bearing steel 100Cr6, harene, groun an phosphate. Treate with molybenum isulfie. earing shell (outer ring) cut. DIN (DIN 648), series E (slim shape). Re-lubricateable (from size 15 with lubrication hole). Initial lubrication before use is require. Suitable for high, alternating loas. Sliing spee up to 60 m/min. C 1 K D Version E..DO Orering Details: e.g.: Prouct No , Spherical earing, Series E, re-lubricateable, 6mm Tilting Angel Prouct No. * C D 1 k α Weight Stanar mm mm mm mm mm mm g ** 6-0, ,008 8, ** 8-0, ,008 10, ** 10-0, ,009 13, ** 12-0, ,009 14, , ,009 18, , ,009 20, , ,009 20, , ,011 24, , ,011 29,3 35, , ,011 34,2 40, , ,013 39, , ,013 45, , ,013 50, , ,013 55, , ,015 66, , ,015 77, , ,015 89, * Outer ring tolerance before cutting. ** Up to size 12 without lubrication bore. Technical tables page Spherical earings Series E, Steel or Stainless Steel, maintenance-free Material stanar: Inner ring bearing steel 100Cr6, harene, groun, polishe an har chrome. earing shell from bearing steel, 100Cr6 with PTFE-lining. From size 35 in 2RS-version (seale on both sies). C D Version E..UK Material stainless: Inner ring stainless steel (from size 45 stainless steel ), harene, groun an polishe. earing shell stainless steel , with PTFE-lining. DIN (DIN 648), series E (slim shape). Maintenance-free. Suitable for high uniirectional loa. Sliing spee up to 10 m/min. 1 K Orering Details: e.g.: Prouct No , Spherical earing, Series E, maintenance-free, 6mm Tilting Angel Prouct No. Prouct No. C D 1 K α Weight Stanar Stainless mm mm mm mm mm mm g , ,008 8, , ,008 10, , ,009 13, , ,009 14, , ,009 18, , ,009 20, , ,009 20, , ,011 24, , ,011 29,3 35, , ,011 34,2 40, * , ,013 39, * , ,013 45, * , ,013 50, * , ,013 56, * , ,015 66, * , ,015 77, * , ,015 89, * From size 35 in 2RS-version (seale on both sies). Technical tables page

15 Clevis Joints similar DIN 71752, Aluminium, KL Clevis Joints similar DIN 71752, Aluminium, SL f f a b e a b e c Material: Clevis an bolt aluminium, anoize black. With KL-Retainer from steel, bright zinc plate. Orering Details: e.g.: Prouct No , Clevis joint 4 x 8, Aluminium, KL c Material: Clevis an bolt aluminium, anoize black. With SL-Retainer from steel, bright zinc plate. Orering Details: e.g.: Prouct No , Clevis joint 4 x 8, Aluminium, SL Prouct No. Prouct No. Size a b c e f Weight KL right SL right mm mm mm mm mm mm mm g x M4 4 2, x M4 4 2, x M5 5 4, x M6 6 7, x M8 8 16, x M , x M , x M , x M ,2 Clevises similar DIN 71752, Aluminium Snap-On-olts type ES c a b e f Material: Aluminium, anoize black. To be use with ES bolt or customer s bolt. Material: Steel, bright zinc plate. ES bolt an clevis can be use as fork joint. Orering Details: e.g.: Prouct No , Clevis 4 x 8, Aluminium Orering Details: e.g.: Prouct No , ES olt for Clevis 4 x 8 Weight Weiht Prouct No. Prouct No. Size a b c e f Clevis olt Clevis ES olt mm mm mm mm mm mm mm g g x M4 4 1,7 1, x M4 4 2,4 2, x M5 5 3,1 2, x M6 6 5,2 4, x M8 8 12,7 10, x M , x M ,6 33, x M , x M ,

16 Clevis Joints similar DIN 71752, Stainless Clevises similar DIN 71752, Stainless Material: Stainless Steel Design A: With bolt an circlip. Material: Stainless steel Design : Without bolt. Orering Details: e.g.: Prouct No , Clevis DIN 71752, A 4 x 8, Right Han, Orering Details: e.g.: Prouct No , Clevis DIN 71752, 4 x 8, Right Han, Stainless Stainless Weights Prouct No. Prouct No. Size a b c e f A A Right Right mm mm mm mm mm mm mm g g x M x M x M x M x M x M x M x M x M x M x M x M x M x M x M x M Clevis Joints DIN 71752, Steel Clevises DIN 71752, Steel Snap-On-olts type ES, Steel Material: Steel zinc-plate. Design A: with split pin. Orering Details: e.g.: Prouct No , Clevis DIN 71752, A 4 x 8 Right Han Material: Steel zinc-plate. Design : without bolt. Orering Details: e.g.: Prouct No , Clevis DIN 71752, 4 x 8 Right Han Material: Steel zinc-plate. ES-Stanar 01 Orering Details: e.g.: Prouct No , ES Pin, for 4 x 8 Weights Prouct No. Prouct No. Prouct No. Prouct No. Prouct No. Size a b c e f A ES A Right A Left Right Left ES olt mm mm mm mm mm mm mm g g g x M , x M , x M , x M , x M , x M x M , x M , x M x M , x M , x M , x M x M x M x M Clevis with ES-bolt can be use as fork joint. 473

17 Clevis Joints DIN 71752, External Threa, Zinc-Plate Clevises DIN 71752, External Threa, Zinc Plate Material: 11SMnPb30 zinc-plate. Design A: With bolt an split pin. Orering Details: e.g.: Prouct No , Clevis Joint DIN 71752, A, External Threa Material: 11SMnPb30 zinc-plate. Design : without bolt. Orering Details: e.g.: Prouct No , Clevis DIN 71752,, External Threa Weights Prouct No. Prouct No. Size a b c e f l ±0,5 1 A A Right Right mm mm mm mm mm mm mm mm g g x M x M x M x M x M x M Mating Pieces with Internal Threa for Clevis Joints DIN 71752, Zinc Plate Material: 11SMnPb30 zinc-plate. Orering Details: e.g.: Prouct No , Mating piece with Internal Threa, Right-Han Prouct No. Size a b c e f l ±0,5 1 Weight mm mm mm mm mm mm mm mm g x M x M x M x M x M x M Loctite threa locking an boning proucts page

18 Angle Joints DIN 71802, zinc-plate Material: Steel zinc-plate. Form C: With threae bolt an hexagon nut, ball stu harene. Form CS: With threae bolt, hexagon nut an circlip. all stu harene. Right = Right-han threa in the socket. Left = Left-han threa in the socket. Design C Design CS Socket with right-han or left-han threa Orering Details: e.g.: Prouct No , Angle Joint DIN 71802, C 8, Right Han all stu always with right-han threa. Pivoting Angle Weight Prouct-No. Prouct-No. Prouct-No. Prouct-No. H9/h9 1 2 SW h14 a +0,3 e l ±3 3 l ±0,3 2 C CS* C Rigth CS Right C Left CS Left mm mm mm mm mm mm mm Degrees Degrees g M ,2 9 10,2 18º 18º/10º 15, M , ,5 18º 18º/15º 25, M ,5 18º 18º/15º 53, M , º 18º/15º 103, M14x1, , º 18º/15º 220,9 * Pivoting angle reuce by circlip. Angle Joints DIN 71802, Stainless Material: Stainless steel Design CS: With threae bolt, hexagon nut an circlip. Right = Right-han threa in the socket. Left = Left-han threa in the socket. Form CS socket with right-han or left-han threa Orering Details: e.g.: Prouct No , Angle Joint DIN 71802, CS 8, Right Han, Stainless ball stu always righthan threa. Prouct-No. Prouct-No. H9/h9 1 2 SW h14 a +0,3 e l ±3 3 l ±0,3 2 Pivoting Angle* Weight CS Rigth CS Left mm mm mm mm mm mm mm Degrees g M ,2 9 10,2 18º/10º 15, M , ,5 18º/15º 25, M ,5 18º/15º 53, M , º/15º 103, M14x1, , º/15º 220,9 * Pivoting angle reuce by circlip. Sealing Cap for Angle Joints DIN Material: Neoprene. The sealing caps have elivere an optimal performance use with joints in very irty or usty environment. They also offer goo protection against spray water an steam. Temperature range: -30ºC to +110ºC (short term 140ºC). Orering Details: e.g.: Prouct No , Sealing Cap for 8 mm 1 Prouct No. for 1 Weight DIN h 1 h 2 p.% Pcs. mm mm mm mm mm mm mm g ,4 9 11,5 4,5 1, ,5 6,9 10,5 13 6,5 3, , ,5 3, ,5 17,5 21 8,5 4, , ,

FULL COMPLEMENT NEEDLE BEARINGS

FULL COMPLEMENT NEEDLE BEARINGS FULL OMPLEMENT NEELE EARINGS Technical features Full complement neele bearings These bearings are available with or without an inner ring from 12 bore size. Stanar complete bearings type NA have an inner

More information

Technical features. Cam followers

Technical features. Cam followers AM FOLLOWERS Technical features am followers Naella cam followers are esigne to run irectly on various types of surface such as cams, ramps an slieways. In orer to satisfy the operating conitions impose

More information

High-Performance Servo-Worm Reducers Input and Output Couplings for Servo-Worm Reducers 18. Selection and Ratings for Servo-Worm Reducers 19 22

High-Performance Servo-Worm Reducers Input and Output Couplings for Servo-Worm Reducers 18. Selection and Ratings for Servo-Worm Reducers 19 22 Table of Contents Page High-Performance Servo-Worm Reucers 7 17 Input an Output Couplings for Servo-Worm Reucers 18 Selection an Ratings for Servo-Worm Reucers 19 22 Mounting, Maintenance an Spare Parts

More information

Deep groove ball bearings

Deep groove ball bearings Deep groove ball bearings 6200-2 J/C3 HC5 GJN Nomenclature 1 2 3 4 5 1. Seals, shiels & snap rings: 2. Cage esigns: 4. Suffix: RSH RS2 RSL R 2RSH 2RS2 2RSL 2R 2 NR Contact seal of synthetic rubber (NBR)

More information

Triple row axial angular contact ball bearings

Triple row axial angular contact ball bearings Triple row angular contact ball bearings Series DKLF Heavy Series Features Bearings of series DKLF with a bore iameter of 30 mm an 40 mm are available in a Heavy series. This allows the user to achieve

More information

Product overview. Joints. Circlips for ball seats DIN K0714. Quick plug couplings with radial offset compensation K0709. Page 837.

Product overview. Joints. Circlips for ball seats DIN K0714. Quick plug couplings with radial offset compensation K0709. Page 837. Joints 825 Product overview Joints Quick plug couplings with radial offset compensation K0709 Quick plug couplings with radial offset compensation and screw-on flange K0710 Quick plug couplings with angular

More information

On the market there are various types of V-belts, among which, the most 'widespread are: by SIT and shown in this catalogue are suitable to be used

On the market there are various types of V-belts, among which, the most 'widespread are: by SIT and shown in this catalogue are suitable to be used V-Pulleys SIT V-Pulleys On the market there are various types of V-belts, among which, the most 'wiesprea are: narrow SP-SPA-SPB-SPC (ISO4184 - DIN 7753) classic -A-B-C (ISO 4184 - DIN 2215) American narrow

More information

Heavy-Duty Rod Ends - Male with integral spherical plain bearing

Heavy-Duty Rod Ends - Male with integral spherical plain bearing Heavy-Duty Rod Ends - Male with integral spherical plain bearing 65700 Order No. Thread (hand) d 1 l 1 d 2 d 3 d 4 l 2 l 3 X g H7 65700.W0005 Right 5 33 M 5 11,11 18 20 9 14 65700.W0006 Right 6 36 M 6

More information

TABLE OF CONTENT. Single Row Radial Ball Bearings. Female Rod Ends. Male Rod Ends. Spherical Plain Bearings with PTFE Liner. Solid Type Shaft Collar

TABLE OF CONTENT. Single Row Radial Ball Bearings. Female Rod Ends. Male Rod Ends. Spherical Plain Bearings with PTFE Liner. Solid Type Shaft Collar Since 001, GR earings, a 100% Canaian family owne company, has been a successful bearing supplier to Distributors an OEMs across Canaa. Our bearings are mainly importe from carefully selecte manufacturers

More information

BEARINGS WITH CAGE - GUIDED NEEDLES

BEARINGS WITH CAGE - GUIDED NEEDLES EARINGS WITH AGE - GUIE NEELES Technical features earings with cage - guie neeles ONSTRUTION The basic constructions of neele roller bearings are: 1 ) 10 ). Neele roller bearings with integral flanges

More information

Ø range <500 mm. Ø range >500 mm. Operating conditions. Surface quality. Surface roughness R a R max

Ø range <500 mm. Ø range >500 mm. Operating conditions. Surface quality. Surface roughness R a R max Hyraulics Ro Seals Merkel U-Ring T 20 Merkel U-Ring T 20 Merkel U-Ring T 20 PUR profile ring Material range

More information

Shaft Diameter d 1 3 /16 01 B /4 01 B /16 01 B /2 01 B /16 01E B /4 01E B

Shaft Diameter d 1 3 /16 01 B /4 01 B /16 01 B /2 01 B /16 01E B /4 01E B Lubrication Fittings Lubrication points are tappe 1/4 NPT or 1/8 NPT epening on size an series, an fitte with nipples for grease lubrication as stanar. nipples may be remove an replace with other fittings

More information

...our linkages, your solution. Rod Ends

...our linkages, your solution. Rod Ends ...our linkages, your solution Technical Information Introduction All of our rod ends incorporate either a plain spherical bearing, ball bearing, or roller bearing. Below is an overview of each type. Plain

More information

Product program. Rod ends and spherical bearings. Bearings and steel balls. ASK Bearing units. ASK Product program. ASAHI Bearing units

Product program. Rod ends and spherical bearings. Bearings and steel balls. ASK Bearing units. ASK Product program. ASAHI Bearing units Product program 1 2 3 4 5 6 7 8 Rod ends and spherical bearings Bearings and steel balls ASK Bearing units ASAHI Bearing units Metric cam follower bearings Slide bushes Shaft-hub-connections Clevises and

More information

Split pillow blocks

Split pillow blocks Definition an capabilities 638 Series 639 Variants 639 Design criteria: loas an torques 640 Installation/Assembly criteria: seal selection 641 Characteristics 642 Pillow block housing for bearings with

More information

BALL BEARINGS & STEEL SHAFTS

BALL BEARINGS & STEEL SHAFTS BA BEARINGS & STEE SHAFTS Every care has been taken to ensure the accuracy of the information containe in this catalogue, but no liability can be accepte for any errors or omissions. We reserve the right

More information

60.08 Style 233S Restrained Flexible Coupling For Dynamic Joint Deflection

60.08 Style 233S Restrained Flexible Coupling For Dynamic Joint Deflection Style 33S Restraine Flexible Coupling Victaulic Bolte Split-Sleeve Proucts (VBSP) Style 33S stainless steel restraine couplings (formerly Depen-O-Lok FxF Moifie) provie a fully restraine, flexible pipe

More information

STROKE BUSH SLIDE ROTARY BUSH STROKE BUSH

STROKE BUSH SLIDE ROTARY BUSH STROKE BUSH STROKE BUSH STROKE BUSH STRUCTURE AN AVANTAGES E- AOWABE SPEE FOR COMBINE ROTATION AN STROKE MOTION E- RATE OA AN RATE IFE E- FIT E- USE AN HANING PRECAUTIONS E- IMENSION TABE E- SRE SERIES STRUCTURE AN

More information

*内輪/B126-B128/E_*内輪/B126-B128/E 11/05/25 10:07 ページ 127 Inner Rings

*内輪/B126-B128/E_*内輪/B126-B128/E 11/05/25 10:07 ページ 127 Inner Rings Inner Rings Inner Rings Inner Rings Inner Rings Many of the neele roller bearings use a shaft as the irect raceway surface without using inner ring. However, it is recommene to use any of the inner rings

More information

End bearings for screw ends form and

End bearings for screw ends form and R310EN 3301 (2009.08) Precision all Screw Assemblies osch Rexroth AG 91 En bearings for screw ens form 931 93 an 941 94 Pillow block unit SE-F earing LAF earing LAN Shown with slotte nut NMA Shown with

More information

Other materials are available on request. Operating conditions

Other materials are available on request. Operating conditions Merkel U-Ring T 18 Merkel U-Ring T 18 Asymmetrical sealing lip POM back-up ring PUR profile ring Profile ring Coe Harness Polyurethane 95 AU V142 95 Shore A Fig. 1 Merkel U-Ring T 18 Back-up ring Polyacetal

More information

Angular contact ball bearings

Angular contact ball bearings Angular contact ball bearings 7200 BE CB Y HC5 Nomenclature 1 2 3 4 1. esign: 2. Clearance: 3. Cage esigns: B BE A E NR N2 2Z 2RS1 40 contact angle 40 contact angle, high capacity, all ISO corners Conra

More information

Specialty Ball Bearings

Specialty Ball Bearings Specialty all earings Providing custom-engineered bearing solutions to industry for over 100 years ISO 9001:2000 www.rbcbearings.com 800.390.3300 RC earings Incorporated (RC earings, RC) has had a long

More information

KUNSTSTOFF-METALL-FORMTEILE CROSSED-ROLLER-SLIM-SPLIT-BEARING. Crossed roller bearing PSX-08. Crossed roller bearing PSX-08 83

KUNSTSTOFF-METALL-FORMTEILE CROSSED-ROLLER-SLIM-SPLIT-BEARING. Crossed roller bearing PSX-08. Crossed roller bearing PSX-08 83 CROSSE-ROLLER-SLIM-SPLIT-BEARING Crosse roller bearing PSX-08 Crosse roller bearing PSX-08 83 CROSSE-ROLLER-SLIM-SPLIT-BEARING KUNSTSTOFF-METALL-FORMTEILE escription of shape Crosse roller bearings are

More information

60.03 Style 231 Non-Restrained Flexible Expansion Coupling

60.03 Style 231 Non-Restrained Flexible Expansion Coupling Style 31 Non-Restraine Flexible Victaulic Bolte Split-Sleeve Proucts (VBSP) Style 31 carbon steel expansion couplings (formerly Depen-O-Lok FxE) provie a non-restraine, flexible pipe joint that is esigne

More information

FOR EVERYTHING ENCLOSURE

FOR EVERYTHING ENCLOSURE FOR EVERYTHING ENCLOSURE PVC EDGE PROTECTOR Provies excellent protection for steel eges 9 styles available Simple to install SEE PAGES 498-499 DRAWER SLIDES Available in light, meium an heavy uty Full

More information

Tungsten Carbide Burrs

Tungsten Carbide Burrs Tungsten Carbie Burrs Material Groups,, Types of Cut PFERD tungsten carbie burrs are esigne for machining materials of virtually any strength. Their superior performance reflects an optimum combination

More information

60.07 Style 233 Restrained Flexible Coupling For Dynamic Joint Deflection

60.07 Style 233 Restrained Flexible Coupling For Dynamic Joint Deflection Style 33 Restraine Flexible Coupling For Victaulic Bolte Split-Sleeve Proucts (VBSP) Style 33 carbon steel restraine couplings (formerly Depen-O-Lok FxF Moifie) provie a fully restraine, flexible pipe

More information

HKK CURVED JAW COUPLINGS HITEX COUPLINGS

HKK CURVED JAW COUPLINGS HITEX COUPLINGS HKK CURVE JAW COUPINGS HITEX COUPINGS CURVE JAW COUPINGS Coupling selection The HKK jaw coupling selection shoul be mae accoring to IN 740-2. Proper imensioning of the coupling shoul be one to ensure that

More information

New Super Metric Ball Bushing * Bearings Technical Bulletin

New Super Metric Ball Bushing * Bearings Technical Bulletin ew Super Metric all ushing earings Technical ulletin Super Metric all ushing earings igh performance from superior esign: coefficient of friction as low as 0,001. This allows the use of smaller less expensive

More information

your reliable partner EAS -Compact K.490.V16.EN

your reliable partner EAS -Compact K.490.V16.EN ES -Compact K.490.V16.EN www..com We safeguar the movements of this worl Specialists for power transmission for more than a century mayr power transmission is one of the most traitional an yet most innovative

More information

Information. Plate Cylinder Type C(L)KU32. HIGH type. (Magnetic field resistant auto switch) New. New. New Newly added guide pins

Information. Plate Cylinder Type C(L)KU32. HIGH type. (Magnetic field resistant auto switch) New. New. New Newly added guide pins Information Pin lamp yliners ompact yliner Type (L)G32 Magnetic fiel resistant auto switch mounting type LOW type (-X81) HIGH type (-X82) Plate yliner Type (L)U32 Magnetic fiel resistant auto switch mounting

More information

SLIM-SPLIT-BEARING KUNSTSTOFF-METALL-FORMTEILE

SLIM-SPLIT-BEARING KUNSTSTOFF-METALL-FORMTEILE SLIM-SPLIT-BEARING KUNSTSTOFF-METALL-FORMTEILE Publishe by KMF Kunststoff-Metall-Formteile GmbH Postweg 34-40 -73441 Bopfingen Phone 0736/7001 Fax 0736/7007 E-Mail info@kmf-bearings.e All rights reserve.

More information

Rexnord Tollok Locking Assemblies

Rexnord Tollok Locking Assemblies Tollok Catalog ownloa the most up-to-ate version at www.rexnor.com/ocumentation Rexnor Tollok Locking Assemblies Why Choose Rexnor Tollok Locking Assemblies? Why Choose Rexnor? When it comes to proviing

More information

CAD data. download. PRODUCT RANGE PERFECT QUALITY AND DYNAMIC

CAD data. download.   PRODUCT RANGE PERFECT QUALITY AND DYNAMIC CAD data download www.askubal.de PRODUCT RANGE PERFECT QUALITY AND DYNAMIC Imprint: This catalog has been created with adequate care and all data has been checked. All preceding issues are hereby invalid.

More information

The Ideal Locking Devices For Shaft-to-Hub Connections. Proven Design. Easy To Use

The Ideal Locking Devices For Shaft-to-Hub Connections. Proven Design. Easy To Use C-ROM Sizing Software ETP Keyless Shaft Mount Connections The Ieal ocking evices For Shaft-to-Hub Connections. ETP Connections are ieal for positioning an locking shaft components in a system. They are

More information

Industry. SNR : The Bearing Housings

Industry. SNR : The Bearing Housings Inustry SNR : The Bearing ousings Contents Page Bearing ousings n Mounting ccessories 2 ousings 3 Bearings 4 Sealing Systems 6 ubrication 8 Bearing Clearance 10 Mounting Tools 12 Bearing rrangement 13

More information

Radial Insert Ball Bearings Housed Bearing Units

Radial Insert Ball Bearings Housed Bearing Units Raial Insert all earings House earing Units Technical rouct Information TI 110 This publication has been prouce with a great eal of care, an all ata have been checke for accuracy. However, no liability

More information

COMPANY PROFILE. Our products have been supplied to local and foreign customers for the following industries:

COMPANY PROFILE. Our products have been supplied to local and foreign customers for the following industries: CECK VAVES COMPANY PROFIE The company ARMATURY Group a.s. is a leaing Czech manufacturer an istributor of inustrial valves, fittings an control systems for valves. The annual prouction is of more than

More information

10/2017. Product Catalogue BRONZE BARS AND BEARINGS. Your first choice in bronze

10/2017. Product Catalogue BRONZE BARS AND BEARINGS. Your first choice in bronze 10/2017 Prouct Catalogue BRONZE BARS AN BEARINGS Your first choice in bronze Oy Johnson Metall Ab Your first choice in bronze Oy Johnson Metall Ab casts an machines bronze-alloy plain bearings an machine

More information

QuadLube, SpreadLock Seal, ImpactTuff, DuraLube TM Spherical Plain Bearings

QuadLube, SpreadLock Seal, ImpactTuff, DuraLube TM Spherical Plain Bearings QuaLube, SpreaLock Seal, ImpactTuff, uralube TM Spherical Plain earings Innovative prouct features that provie unique performance avantages. High loa capacity, re-lubrication options, an patente esigns.

More information

HepcoMotion. Ball Bushings Range.

HepcoMotion. Ball Bushings Range. HepcoMotion Ball Bushings Range www.hepcomotion.com Contents Super Ball Bushing - European Stanar SBE - Super European Close SBEO - Super European Open CS - Super European Pillow Block Close CSO - Super

More information

NSK Ball Screws for Standard Stock

NSK Ball Screws for Standard Stock NSK Ball s for Stanar Stock ompact Series Next-generation compact ball screws offer quiet, high spee operating performance. stanar stock series assures immeiate elivery. New! Patent Pening BSS Series next-generation

More information

Ball and Roller Bearings

Ball and Roller Bearings Ball an Roller Bearings Ball an Roller Bearings Introuction Business publication Ball an Roller Bearings ZVL - ZKL offers a survey of the basic types an sizes of bearings being prouce an elivere uner

More information

Guide units. For toolmaking, fixture manufacturing and machine engineering

Guide units. For toolmaking, fixture manufacturing and machine engineering Guide units For toolmaking, fixture manufacturing and machine engineering Guide units in compliance with DIN, ISO and STEINEL standards or according to your specifications Guide pillars Guide and pillar

More information

CATALOG

CATALOG CATALOG www.jrbearing.cn www.importbearing.ru 1 The contents of this catalog are subjecte to change without prior notice. Every possible effort has been mae to ensure that the ata herein is correct; however,

More information

ANSI VALVE CATALOGUE

ANSI VALVE CATALOGUE ANSI VAVE CATAOGUE GATE VAVES GOBE VAVES CHECK VAVES BA VAVES BUTTERFY VAVES SYSTEMS AND PRODUCTS FOR INDUSTRIA CARGO TRANSFER AND STORAGE ANSI VAVE CATAOGUE Introuction CTS has evelope itself into a reputable

More information

HepcoMotion. Shaft precision steel and aluminium shaft

HepcoMotion. Shaft precision steel and aluminium shaft HepcoMotion Shaft precision steel an aluminium shaft Introucing the HepcoMotion Precision Shaft Correct Shaft selection is vital if maximum performance is to be achieve from your linear system. Hepco Precision

More information

Keyless Locking Devices

Keyless Locking Devices Keyless ocking evices IC 100 IC 100 s N/ 2 17 47 20 26 6 16 260 31 104 18 47 20 26 6 16 280 31 104 19 47 20 26 6 16 290 31 104 20 47 20 26 6 16 310 31 104 22 47 20 26 6 16 340 31 104 24 50 20 26 6 16 370

More information

Metal drill bits. Stronger than steel. Nothing stops the metal drill bits because we offer a drill bit for every application. HSS-E twist drill bit

Metal drill bits. Stronger than steel. Nothing stops the metal drill bits because we offer a drill bit for every application. HSS-E twist drill bit HSS-E IN 338 cobalt 72-75 HSS IN 338 groun 76-79 HSS IN 338 stanar 80-84 HSS IN 338 stanar, shank reuce 85 HSS IN 340 86 HSS IN 1869 87 HSS hollow section rill bit / facae rill bit 88 HSS IN 345 89-90

More information

SIT timing pulleys - TOP DRIVE HTD

SIT timing pulleys - TOP DRIVE HTD IT timing pulleys - TOP DIV TD TOP DIV TD pulleys have a ifferent esign from the traitional toothe pulleys. The axial grooves are esigne to allow the belt teeth to catch the pulley teeth with negligible

More information

Balanced to G RPM s. the nose nut to be tightened to 100% Inspected,

Balanced to G RPM s. the nose nut to be tightened to 100% Inspected, WEER CHUCKS Mae in Why is the Weler Chuck the Best Choice? WHY THE esigne for Milling & rilling WEER CHUCK? The Weler Chuck is the most versatile chuck available in the market place toay! Balance to G2.5

More information

DRIVE-TECHNOLOGY INKOMA - GROUP. Accessories for HSG, KSH, HSGK and DSH

DRIVE-TECHNOLOGY INKOMA - GROUP. Accessories for HSG, KSH, HSGK and DSH INKOMGROUPINKOM DRIVETECHNOOGY GROUP ccessories HSG, KSH, HSGK an DSH INKOMGROUP Heaoffice Sitz er INKOM Maschinenbau GmbH Neue Reihe 44 D 38162 Schanelah Germany phone: +49/(0)5692210 fax: +49/(0)569221

More information

METAL DRILL BITS STRONGER THAN STEEL HAMMER DRILL BITS CHISEL METAL DRILL BITS WOOD DRILL BITS SAWS ASSORTMENTS MODULES - SHELVES

METAL DRILL BITS STRONGER THAN STEEL HAMMER DRILL BITS CHISEL METAL DRILL BITS WOOD DRILL BITS SAWS ASSORTMENTS MODULES - SHELVES STRONGER THAN STEEL RILL 307 HSS-E IN 338 cobalt 76 79 311 HSS TIN IN 338 steel rill bit 80 81 302 HSS IN 338, groun, split point 82 85 300 HSS IN 338, stanar 86 90 300 HSS IN 338, stanar, shank reuce

More information

Slewing Ring Bearings

Slewing Ring Bearings Slewing Ring Bearings Wafangian Weiyuan Bearing Manufacturings Co.,Lt. Wafangian Weiyuan Bearing Manufacturings Co.,Lt. A: huhua Inustrial Park,Wafangian,alian,China el:+86-411-85584788 Fax:+86-411-85584896

More information

ROLLER CHAIN SPROCKETS

ROLLER CHAIN SPROCKETS ROLLER CHAIN PROCKE ypes an Materials Correct engagement between roller chain an sprocket is require for smooth transmission of roller chain. Appropriate selection of number of teeth (spee ratio), center-to-center

More information

NSK Ball Screws for Standard Stock

NSK Ball Screws for Standard Stock www.bergab.ru Берг АБ bergab@ya.ru Тел. (495)-228--21, факс (495) 223-371 NSK Ball s for Stanar Stock ompact Series Next-generation compact ball screws offer quiet, high spee operating performance. stanar

More information

TECHNICAL INFORMATION

TECHNICAL INFORMATION General Nomenclature Spherical Roller Bearings The spherical roller bearing is a combination radial and thrust bearing designed for taking misalignment under load When loads are heavy, alignment of housings

More information

RBC Track Runners Heavy-Duty Stud-Type Track Rollers

RBC Track Runners Heavy-Duty Stud-Type Track Rollers RC Track Runners Heavy-uty Stu-Type Track Rollers Smoother. Faster. Longer. ecause That s How We Roll. RC Track Runner Plain Track Rollers SL SL S THREA S THREA all earing () Style Roller earing (TR) Style

More information

RINGFEDER Shrink Discs RfN 4091

RINGFEDER Shrink Discs RfN 4091 RINGFEER Shrink iscs RfN 4091 split R1 ma Shrink isc RINGFEER RfN 4091 Location Shrink isc RINGFEER RfN 4091 HC imensions R1 ma Split Shrink iscs In the application shown above special screws accoring

More information

M24X

M24X Rod Ends Female Self-aligning bearing used for control linkages. Able to take tensile and compressive loads, steel on composite, complete with lubricating nipple. Body: Carbon steel S45C (C45 Din) Ball:

More information

Linear Bushings and Shafts. The Drive & Control Company

Linear Bushings and Shafts. The Drive & Control Company Linear Bushings and s The Drive & Control Company 2 Bosch Rexroth Corp. Linear Motion and Assembly Technologies Linear Bushings R310A 3100 Linear Motion Technology Ball Rail Systems Standard Ball Rail

More information

Capillary Thermometers according to DIN Nitrogen Filled Option: Contacts

Capillary Thermometers according to DIN Nitrogen Filled Option: Contacts Capillary Thermometers accoring to DIN 16206 Nitrogen Fille Option: Contacts measuring monitoring analysing Environmentally-frienly measuring system with non-toxic nitrogen Fast response time Measuring

More information

igubal Pressfit Spherical Bearings Easy to fit Extremely cost-effective Chemical resistant Lightweight High strength

igubal Pressfit Spherical Bearings Easy to fit Extremely cost-effective Chemical resistant Lightweight High strength igubal Pressfit Spherical earings Easy to fit Extremely cost-effective Chemical resistant Lightweight High strength 835 igubal igubal Pressfit Spherical earings Ease of installation makes diverse applications

More information

Reliable Solutions for Continuous Casters

Reliable Solutions for Continuous Casters eliable Solutions for Continuous Casters For More Than A Century, Our Stanars Have Set The Stanar Aroun the worl, companies turn to Timken for innovation an reliability. With expertise in materials science

More information

DryLin R Linear Plain Bearings, Fast and Quiet

DryLin R Linear Plain Bearings, Fast and Quiet +90º 40º +250º 100º Linear Plain Bearings, Fast and Quiet linear plain bearings, made from solid polymers, are dimensionally equivalent to standard ball bearings. They are made entirely of wear resistant

More information

Linear Bushings and Shafts

Linear Bushings and Shafts Linear Bushings and s R310EN 3100 (2004.09) The Drive & Control Company R310EN 3100 (2004.09) Linear Bushings Bosch Rexroth AG 3 Linear Bushings and s Selection Guide 9 Product Overview 10 Overall Dimensions

More information

RoundWay Linear Roller Guides #11

RoundWay Linear Roller Guides #11 RounWay Linear Roller Guies #11 3 13 1 2 4 NW 5 NW 6 8 10 NW NW 7 9 11 12 14 IGST LODS, OST RUGGD, STST SPD ND LRTION RounWay* Linear Roller Guies Offer: Up to twenty times the loa capacity of conventional

More information

DryLin R Linear Plain Bearings, Fast and Quiet

DryLin R Linear Plain Bearings, Fast and Quiet +90º 40º +250º 100º Linear Plain Bearings, Fast and Quiet linear plain bearings, made from solid polymers, are dimensionally equivalent to standard ball bearings. They are made entirely of wear resistant

More information

Shyam Enterprises 5 HEAT EXCHANGERS

Shyam Enterprises 5 HEAT EXCHANGERS Shyam Enterprises HEAT EXCHANGERS 33 Heat Exchangers Introuction The overall heat transfer coefficient of borosilicate glass equipment compare favourably with many alternative process plant construction

More information

DryLin R Linear Plain Bearings, Fast and Quiet

DryLin R Linear Plain Bearings, Fast and Quiet +90º 40º +250º 100º Linear Plain Bearings, Fast and Quiet linear plain bearings, made from solid polymers, are dimensionally equivalent to standard ball bearings. They are made entirely of wear resistant

More information

DryLin R Linear Plain Bearings, Fast and Quiet

DryLin R Linear Plain Bearings, Fast and Quiet +90º 40º +250º 100º Linear Plain Bearings, Fast and Quiet linear plain bearings, made from solid polymers, are dimensionally equivalent to standard ball bearings. They are made entirely of wear resistant

More information

/00 RK 09/2017 EN RIVKLE. Blind rivet nuts and studs

/00 RK 09/2017 EN RIVKLE. Blind rivet nuts and studs 9990000000 RK 09/20 N RIVK lin rivet nuts an stus RIVK 2 Page Principle an function 4 tanar RIVK blin rivet nuts 14 RIVK HRT - High Resistance Threa 36 HRT RIVK FC - For Fiber-reinforce polymer 38 FC RIVK

More information

igubal Pressfit Spherical Bearings Easy to fit Extremely cost-effective Chemical-resistant Light weight High strength

igubal Pressfit Spherical Bearings Easy to fit Extremely cost-effective Chemical-resistant Light weight High strength igubal Pressfit Spherical earings Easy to fit Extremely cost-effective Chemical-resistant Light weight High strength 629 igubal Pressfit Spherical earings The use of pivoting s is usually associated with

More information

Linear Ball Bearings, Shafting & Supports Overview

Linear Ball Bearings, Shafting & Supports Overview Linear Ball Bearings, ing & Supports Overview Linear Ball Bearings, ing & Supports high performance linear ball bearings, shafting an shaft supports are now available from PTI. Available in Inch an Metric

More information

Incremental encoders Insulated through hollow shaft ø inch pulses per revolution programmable (interpolated system)

Incremental encoders Insulated through hollow shaft ø inch pulses per revolution programmable (interpolated system) Features HS35P with insulate hollow shaft Robust inustrial encoer up to IP 67 protection Highly versatile fully programmable encoer Interchangeable bore size(s) using metal inserts Insulating sleeve to

More information

Axial-radial cylindrical roller bearings

Axial-radial cylindrical roller bearings Axial-radial cylindrical roller bearings Designs and variants.............. 320 Bearing data..................... 321 (Boundary dimensions, tolerances) Product table 5.1 Axial-radial cylindrical roller

More information

igubal Pressfit Spherical Bearings Easy to fit Extremely cost-effective Chemical-resistant Light weight High strength

igubal Pressfit Spherical Bearings Easy to fit Extremely cost-effective Chemical-resistant Light weight High strength igubal Pressfit Spherical earings Easy to fit Extremely cost-effective Chemical-resistant Light weight High strength 791 igubal Pressfit Spherical earings The use of pivoting s is usually associated with

More information

Zylinderrollenlager / Cylindrical Roller Bearings

Zylinderrollenlager / Cylindrical Roller Bearings KIS Antriebstechnik GmbH & Co. KG Martha-Neumann-Str. 12-44263 ortmun Telefon +49 231. 92 71 61 0 Telefax +49 231. 92 71 61 0 info@kis-gmbh.e www.kis-gmbh.e Zylinerrollenlager / Cylinrical Roller earings

More information

ASV sturdy and robust construction. DN 10 up to DN bar (PN 10) at 20 C. DMV 755: 1,0-9,0 bar DMV 765: 0,5-9,0 bar

ASV sturdy and robust construction. DN 10 up to DN bar (PN 10) at 20 C. DMV 755: 1,0-9,0 bar DMV 765: 0,5-9,0 bar Pressure Reucing Valve Type DMV Type DMV Print-No. / Design Size Max. Pressure Setting Range Pressure Setting Working Pressure Back lash Operating Security Maintenance Simple inline pipe connection ASV

More information

Inventory Article No. Precision mm 0.01mm 35um 386g. Precision A

Inventory Article No. Precision mm 0.01mm 35um 386g. Precision A DIAL INDICATORS Large Range Dial Inicators Unit:mm Stanar No. : GB/T6311-2004 Measuring Grauation Main Dimension Precision Weight Range Value Coe Coe Coe 1014010150 0-50mm 0.01mm 35um 386g DIAL INDICATORS

More information

Volute Centrifugal Pumps PN 16 / PN 25 for Heat Transfer Media Thermal Oil up to 350 C Hot Water up to 204 C. Series NTWH/CTWH process model

Volute Centrifugal Pumps PN 16 / PN 25 for Heat Transfer Media Thermal Oil up to 350 C Hot Water up to 204 C. Series NTWH/CTWH process model Volute Centrifugal s PN 16 / PN 25 for Heat Transfer Meia Thermal Oil up to 350 C Hot Water up to 20 C Series NTWH/CTWH process moel Series NTWH/CTWH Series NBWH/CBWH block moel Series NIWH/CIWH in-line

More information

Stem Thermometers according to DIN Nitrogen Filled / Optional: Contacts

Stem Thermometers according to DIN Nitrogen Filled / Optional: Contacts Stem Thermometers accoring to DIN 16205 Nitrogen Fille / Optional: Contacts measuring monitoring analysing Environmentally-frienly measuring system with non-toxic nitrogen Fast response time Measuring

More information

FAG Cylindrical Roller Bearings full complement Standards Basic designs Tolerances Bearing clearance

FAG Cylindrical Roller Bearings full complement Standards Basic designs Tolerances Bearing clearance FAG Cylindrical Roller earings full complement FAG Cylindrical Roller earings full complement Standards asic designs Tolerances earing clearance Full complement cylindrical roller bearings are suitable

More information

PRODUCTS FOR THE HYDRAULICS INDUSTRY

PRODUCTS FOR THE HYDRAULICS INDUSTRY PROUCTS FOR THE HYRAULICS INUSTRY SPIRALGUAR SPIRALGUAR High Performance Hose an Cable Protection How to calculate quantity: Outsie iameter of hose Length (m) of hose Insie iameter of Spiralguar X to be

More information

Sine encoders Insulated through hollow shaft ø inch sinewave cycles per turn

Sine encoders Insulated through hollow shaft ø inch sinewave cycles per turn Features Rugge esign up to IP 67 protection Shock resistant up to 200 g s Insulating insert to prevent high shaft currents from amaging bearings Wie range voltage supply 4.75...30 VDC Precision 60 arc-secons

More information

Variable area flowmeter DFM 165 to 350

Variable area flowmeter DFM 165 to 350 ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D60 Vlotho Fon +9 (0) 57 33.7 990 Fax +9 (0) 57 33.7 99 00 www.asvstuebbe.e contact@asvstuebbe.e Variable area flowmeter DFM to 3 For all inustrial uses High

More information

Planetary Servo-reducer. SRP Range. The Machine Tool Drives Company

Planetary Servo-reducer. SRP Range. The Machine Tool Drives Company Planetary Servoreucer SRP Range The Machine Tool Drives Company 1 Range Overview SRP Planetary Servoreucer Versatile Drive solution Hightech planetary reucer + universal flange : multiuse solution Flexibility,

More information

Thrust Needle Roller Bearings Thrust Roller Bearings. Structures of Thrust Bearings. Needle roller. Cage. Cylindrical roller. Cage.

Thrust Needle Roller Bearings Thrust Roller Bearings. Structures of Thrust Bearings. Needle roller. Cage. Cylindrical roller. Cage. eele Roller Bearins Roller Bearins Structure an Features Bearins consist of a precisely mae cae an rollers They have hih riiity an hih loa capacities an can be use in small spaces eele Roller Bearins incorporate

More information

Pneumatic. Cylindersʼ theoretic force. Ø 40 Ø 80 Ø 320. Stroke

Pneumatic. Cylindersʼ theoretic force. Ø 40 Ø 80 Ø 320. Stroke Bonesi Series Pneumatic Cylinders VMA 24562 ISO 6431 SERIES CX Light alloy end caps painted gray. Clean profile aluminium body gauged inside and outside. Bore size 32-40-50-63-80-100-125 Available with

More information

Specialty Ball Bearings

Specialty Ball Bearings Specialty Ball Bearings Providing custom-engineered bearing solutions to industry for over 100 years ISO 9001:2008 www.rbcbearings.com 800.390.3300 RBC Bearings has had a long tradition of innovation,

More information

THIN SECTION BALL BEARINGS RADIAL CONTACT, C-TYPE

THIN SECTION BALL BEARINGS RADIAL CONTACT, C-TYPE 106 KAA Series: Cross Section Size: " KA " K 5/16" KC " K " KF 3/4" KG 1".187.0.312.3.500.0 1.000 *The alphanumeric identification system is used under license. PART *NUMER* iameter 1.5000 2.0000 2.0000

More information

Pressure Relief Valve Overflow Valve Type DHV 715 Type DHV 716 Type DHV 725

Pressure Relief Valve Overflow Valve Type DHV 715 Type DHV 716 Type DHV 725 Pressure Relief Valve Overflow Valve Type DHV Type DHV Type DHV DIBt* approve DIBt* approve High repeating accuracy, with union sockets or spigot ens Print / The optimal monitoring valves Sizes up to Operating

More information

Standard Parts for Mould Making

Standard Parts for Mould Making Standard Parts for Mould Making Index Your Production Partner 4-5 Guide Elements Locating units, round 8 Locating units, flat 8 Compensation Discs 9 Adjusting washers 9 Ejector rods 10 Centering sleeves

More information

Берг АБ Тел. (495) , факс (495)

Берг АБ Тел. (495) , факс (495) www.bergab.ru Берг АБ bergab@ya.ru Тел. (495)-228-6-21, факс (495) 223-371 B A B U S H I N G U N I T S www.bergab.ru Берг АБ bergab@ya.ru Тел. (495)-228-6-21, факс (495) 223-371 www.bergab.ru Берг АБ bergab@ya.ru

More information

Bimetal thermometers Index

Bimetal thermometers Index Inex eneral information Prouct information With brass pocket page Inex 685 Brass pocket; Aluminium case 686 Brass pocket; 687 With brass probe page Brass probe; Aluminium case; Air uct thermometer 688

More information

0200/11.02 AMTEC. Precision thread inserts for plastic parts and equipment for installation

0200/11.02 AMTEC. Precision thread inserts for plastic parts and equipment for installation 0200/11.02 AMTEC Precision threa inserts for plastic parts an equipment for installation AMTEC threa inserts Contents Page AMTEC highly wear-resistant threa inserts for plastic parts 3 The avantages an

More information

Rotary inlets for pressurised oil, compressed air

Rotary inlets for pressurised oil, compressed air Rotary inlets for pressurised oil, compressed air Product data sheets Rotary inlets for pressure oil, single channel 0086-010-size-160 9.03.00 Rotary inlets for pressure oil, two- channel 0088-226/326-size-010040

More information

Micro-Grinder AMERICAN ROTARY TOOLS CO. (ARTCO TOOLS) 250 WEST DUARTE ROAD, #E MONROVIA, CA USA

Micro-Grinder AMERICAN ROTARY TOOLS CO. (ARTCO TOOLS) 250 WEST DUARTE ROAD, #E MONROVIA, CA USA Micro-Griner Air Driven 0,000 min - (rpm) 0,000 min - (rpm) PRESTO 0,000 min - (rpm) MODULAR TYPE HIGH TORQUE AIR GRINDER High torque air motor assemble with special vane mechanism. Two types of air motors

More information

igubal Pivoting Bearings igubal Pivoting Bearings Phone Fax Easy to fit Extremely cost-effective

igubal Pivoting Bearings igubal Pivoting Bearings Phone Fax Easy to fit Extremely cost-effective igubal igubal Easy to fit Extremely cost-effective Resistant to chemicals Light weight High strength 55.1 igubal Technical data igubal igus GmbH 51147 Cologne Internet www.igus.de E-mail info@igus.de The

More information