Cylinders. Series TQ Agricultural Cylinders. Vickers. Nominal Pressure: 2500 psi

Size: px

Start display at page:

Download "Cylinders. Series TQ Agricultural Cylinders. Vickers. Nominal Pressure: 2500 psi"

Jasmine Felicity Townsend
6 years ago
Views:

1 Vickers Cylinders Series TQ Agricultural Cylinders Nominal Pressure: 500 psi Released A

Series TQ Hydraulic Cylinders Designed for Agricultural Applications Features Working pressure to 500 psi Intermittent surge pressures to 3000 psi Pressure tested to 000 psi ASAE Standard Cylinders

2 Series TQ Hydraulic Cylinders Designed for Agricultural Applications Features Working pressure to 500 psi Intermittent surge pressures to 3000 psi Pressure tested to 000 psi ASAE Standard Cylinders There are nine Series TQ cylinders designed for use where ASAE 8 and 16 stroke cylinders are required. Part numbers with ASAE suffix represent ASAE cylinders. Additional specifications are provided in the main part number table. There are no available options. ASAE 16 stroke cylinders incorporate 1 1/ diameter clevis pins. Pins High tensile steel, zinc plated to prevent corrosion Rod Cap, End Clevis, and Rod Clevis Ductile iron castings take shock loads without cracking. Optional Stroke Control On all ASAE cylinders. Clevis Bolt Grade 5 for extra strength Wiper Seal Nitrile rubber bonded to mental case. Prevents contaminants from entering cylinder. Tie Rods High tensile steel to prevent stretching under pressure. Body Precision finished steel with heavy wall to provide greater wear and strength. O Rings To eliminate end leakage Rod High tensile strength, precision ground and polished steel. Hard chrome plated for wear and corrosion resistance. Ports Double ported end clevis for greater flexibility of assembly. Unless otherwise stated, cylinders are assembled with open port aligned with pin. Piston Seal Nitrile 90 Durometer O Ring with anti-extrusion rings for longer life.

3 Series TQ Hydraulic Cylinders Part numbers and specifications Bore x Stroke Rod Dim. between pin centers Retracted Extended Clevis Pin Cylinder Weight Lbs. TQ008 TQ008ASAE TQ010 TQ01 TQ01 TQ016 TQ018 TQ00 TQ0 TQ508 TQ508ASAE TQ510 TQ51 TQ51 TQ516 TQ518 TQ50 TQ5 TQ3008 TQ3008ASAE TQ3010 TQ301 TQ301 TQ3016 TQ3016ASAE TQ3018 TQ300 TQ30 x 8 x 8 x 10 x 1 x 1 x 16 x 18 x 0 x 1 / x 8 1 / x 8 1 / x 10 1 / x 1 1 / x 1 1 / x 16 1 / x 18 1 / x 0 1 / x 3 x 8 3 x 8 3 x 10 3 x 1 3 x 1 3 x 16 3 x 16 3 x 18 3 x 0 3 x 18 1 / x 6 1 / 0 1 / x 30 1 / 1 / x 38 1 / 18 1 / x 6 1 / 0 1 / x 30 1 / 1 / x 38 1 / 18 1 / x 6 1 / 0 1 / x 30 1 / 1 / x 38 1 / 3 x 7 1 / TQ08 TQ08ASAE TQ10 TQ1 TQ1 TQ16 TQ16ASAE TQ18 TQ0 TQ 3 1 / x / x / x / x / x / x / x / x / x / x 18 1 / x 6 1 / 0 1 / x 30 1 / 1 / x 38 1 / 31 1 / x 7 1 / TQ008 TQ008ASAE TQ010 TQ01 TQ01 TQ016 TQ016ASAE TQ018 TQ00 TQ0 x 8 x 8 x 10 x 1 x 1 x 16 x 16 x 18 x 0 x 18 1 / x 6 1 / 0 1 / x 30 1 / 1 / x 38 1 / 3 x 7 1 / TQ5008 TQ5010 TQ501 TQ501 TQ5016 TQ5016ASAE TQ5018 TQ500 TQ50 TQ x 8 5 x 10 5 x 1 5 x 1 5 x 16 5 x 16 5 x 18 5 x 0 5 x 5 x 30 1 / x 3 1 / 1 / x 36 1 / 6 1 / x 0 1 / 8 1 / x 1 / 3 x 7 1 / 30 1 / x 8 1 / 3 1 / x 5 1 / 36 1 / x 60 1 / 1 / x 7 1 /

4 Series TQ Hydraulic Cylinders Dimensional Data in (mm) H G M E Rod C ** L D PORT PORT F I J K B A Plus Stroke B Bore Dia.00 (51).50 (6) 3.00 (76) 3.50 (89).00 (10) 5.00 (1) A* B* C D E F G H I J K L M UNF 1.5 (311).50 (57.) * Expect 8 & 16 ASAE cylinders listed on page 3 ** See page 3 for rod diameters Cylinders Size Selection 1 (38.1).750 (69.8) 3.15 (79.) (95.3).15 (10.8).65 (117.5) (15.) 3 (88.9).5 (9.5).5 (9.5).65 (15.9) Ports NPTF 1 1 / 8-1 3/8 1 1 / 8-1 3/8 1 1 / - 1 1/ 1 1 / - 1 1/ 1 1 / - 1 1/ 1 1 / - 1 1/ To select a cylinder for an application, first determine the maximum push and/or pull force required to do the job. Then use the chart below to select the cylinder that gives the necessary force. Please note that although the force requirements derived by formula are theoretically correct, other factors must be considered. One factor is pressure drop. Working pressure at the cylinder port will be less than at the pump outlet. This should be allowed for in your calculations. A margin for overcoming friction in the cylinder must also be added. In addition, a certain amount of force exerted by a cylinder is counteracted by friction developed through the seals and, to a lesser extent, by the weight of the piston itself. The amount of force required to counteract these forces in TQ cylinders has been reduced to 5% or less of the cylinder s theoretical power, without sacrificing sealing quality. Cylinder Bore Rod Push 1 / Push 3 Push 1 1 / 3 1 / Push 1 1 / Push 1 1 / 5 * Push 1 1 / HYDRAULIC PRESSURE (psi) * 5 bore size is limited to 1500 psi maximum operating pressure * *

5 Series TQ Hydraulic Cylinders Accessories Adjustable Stroke Control Kits Provide approximately 3 of stroke adjustment Piston Rod Shipping Weight (lbs.) 5111-F 5111-G 5111-J 1 1 / 3 Stroke Control Spacer Kits Each kit consists of the following One 3 / wide spacer Two wide spacer One wide spacer One wide spacer (Unplated) (Plated) Piston Rod Shipping Weight (lbs.) 511-F 511-G 511-J 511-F-P 511-G-P 511-J-P 1 1 / Clevis Pins Package of pins and hair pin retainers TQ TQ83010 Size x 3 1 / 16 x 3 1 / 16 Hair Pin Retainers Package of 1 retainers. Used on TQ Size For clevis pin 5

2500 PSI STANDARD FEATURES 2500 PSI CYLINDERS

2500 PSI STANDARD FEATURES 2500 PSI CYLINDERS 2500 PSI STANDARD FEATURES Intended Use: Double acting applications Rated Pressure: 2500 PSI Material: High Tensile SAE C1045, ground and polished hard chrome plated Barrel Material: High tensile SAE C1026/St52.3