ML SERIES. Double-Acting Hydraulic Valve Actuator. Thrusts up to 1,500,000 lbs SIL-3 Capable GT3 Triple Seal Gland for Severe Service Applications
|
|
- Naomi Lee
- 6 years ago
- Views:
Transcription
1 Actuation Solutions and Systems for the World s Most Challenging nvironments ML SRIS Double-Acting Hydraulic Valve Actuator Designed & ngineered for Severe-Service Applications Thrusts up to 1,500,000 lbs SIL-3 Capable GT3 Triple Seal Gland for Severe Service Applications
2 Service and support Actuation Solutions and Systems for the World s Most Challenging nvironments Design & Materials *Cushions shown are optional Material Breakdown STANDARD Stainless Steel Material Option Head & cap Machined Steel 316 Barrel Honed Seamless Steel Tubing *Optional Chrome Plating available Application Dependent Consult Factory Piston Ductile Iron Ductile Iron Piston rod PH Gland SA 660 Bronze SA 660 Bronze High Strength Nylon Tie Rod Stress-proof Steel 17-4 PH Wear Rings BZ-PTF for high temp version High Load Piston Seal Standard xcellent wear Gland Seal Configuration resistance and sealing * * Piston Rod Flats 4 wrench flats for easy installation Cushion Plunger (Optional) Floating Cushion plunger provides maximum cushioning effect combined with a quick start for optimum performance Triple Seal Gland Standard Gland Bushing: Cartridge type, no special tools required for removal Buffer Seal: Protects primary seal from pressure spikes. PTF for low friction and long service life. Primary Seal: Heavy Duty Polyurethane U -cup for excellent seal ability and long service life. ncased Rod Wiper: Rugged wiper deflects contamination away for the rod seals for long service.
3 Service and support Actuation Solutions and Systems for the World s Most Challenging nvironments Specifications Cowan ML Series Double-Acting Hydraulic Valve Actuators are designed to suit a wide range of applications; from commodity to severe-service extremes. 250ºc (482ºF) 205ºc (401ºF) 0-29ºc (-20ºF) -40ºc (-40ºF) -54ºc (-65ºF) -70ºc (-94ºF) 105ºc (221ºF) 60ºc (140ºF) From the Arctic to the desert, proven seal compounds for a wide variety of applications. Thrust: up to 1,500,000 lbs Bore Size: 1½ -24 Configuration: Single-Stage and Tandem Stroke Range: Up to 144 Pressure Rating: 3000 psi Rod Size: 1-10 Canadian Oil Sands Tailings Application 8 Bore ML Series
4 Service and support Actuation Solutions and Systems for the World s Most Challenging nvironments Add-Ons Mounting Kits: ISO, MSS & Customized Patterns Available Cowan valve mounting kits can be designed for any linear valve. Mounting kits available in steel and stainless steel construction. Anti-Rotation Torque Arm: Maintains constant alignment between valve stem and cylinder piston-rod. Compatible with rotary type switch boxes and beacons. Field-Adjustable Travel Stops: to limit stroke for position-seated or limited-travel applications. nsures valve reaches positive sealing every time without damage to valve internals 8 Bore ML Series with low temp seals Limit Switches Mechanical Limit Switch SPDT, for Open & Close Indication. Inductive switches also available. Solid State, Reed and inductive type also available. Specify brand and part number Available in 316 Stainless Construction for corrosive applications. Includes attachments such as Rod clevis and ye brackets. Manual Hand Pump Hydraulic manual override with indicator GT3 Gland for Harsh nvironments Triple-seal gland with dual Low Temp wipers. Rugged metallic Cast iron construction scraper and urethane for applications where double-acting wiper deflect yellow metals are contamination away from the not allowed rod seal for long service life. Balluff LDT Optional Balluff LDT for continuous position feedback. 4-20mA, 0-10V and digital outputs available.
5 Rod Thread Size 11/2-6 Bore Actuation Solutions and Systems for the World s Most Challenging nvironments SMALL FMAL (N4) PBX SRIS 250 psi Dual Stage High Output Pneumatic Booster Dimensions (in) Bore Rod Φ MM KK A B V W 11/ / / / / / / / / / / / Service and support
6 Actuator Dimensions: 1½ 8 Bore Actuation Solutions and Systems for the World s Most Challenging nvironments ISOAND MSS MOUNTING FLANG UF RD LB + Stroke RT PBX SRIS 250 psi Dual Stage High Output Pneumatic Booster FB - 4 Holes TF R B A C1 OF BOLTS, D1 THRADS 1 DP ON F1 P.C.D. Dimensions (in) BOR NPT SA FB R TF UF LB RD RT 11/ / / MSS Flange Mounting Dimensions (in) MSS FLANG MAX.THRUST (lbs.) A1 B1 C1 D1 1 F1 FA07 4, / / FA10 9, / / FA14 25, / / FA16 35, / / FA25 50, / / FA30 75, / / FA35 140, / FA40 230, /4-7 11/ Consult factory for more detailed dimensions * Other Mounting Patterns are available; consult factory Thrust Values (lbs) ISO or MSS Mounting Pattern* BOR Rod Φ MM 1500 PSI 3000 PSI XTND RTRACT XTND RTRACT STD OPT 11/ ,650 2,190 5,300 4,380 F/FA10 F/FA ,710 3,540 9,420 7,070 F/FA14 F/FA10 21/ ,360 6,190 14,720 12,370 F/FA14 F/FA10 31/ ,440 10,220 24,880 20,430 F/FA14 F/FA ,840 15,240 37,680 30,470 F/FA25 F/FA ,440 24,730 58,880 49,460 F/FA30 F/FA ,390 35,040 84,780 70,070 F/FA35 F/FA ,700 47, ,400 94,200 F/FA35 F/FA ,360 60, , ,880 F/FA40 F/FA35 ISO Flange Mounting Dimensions (mm) ISO FLANG MAX. THRUST (N) A1 B1 C1 D1 1 F1 F07 19, M F10 39, M F14 99, M F16 150, M F25 200, M F30 325, M F35 700, M F40 1,100, M Service and support
7 Actuator Dimensions: Bore Actuation Solutions and Systems for the World s Most Challenging nvironments WF PBX SRIS 250 psi Dual Stage High Output Pneumatic Booster UF RD R LG + Stroke RT TF FB 4 Holes Dimensions (in) BOR SA SA-61 FB R TF UF LG RD RT WF Consult factory for more detailed dimensions and larger sizes * Other Mounting Patterns are available; consult factory BOR Rod Φ MM Thrust Values (lbs) 1500 PSI 3000 PSI XTND RTRACT XTND RTRACT ,750 93, , , , , , , , , , ,190 Service and support
8 Service and support Published December 9, 2015 Related materials Visit our website to download or request a printed catalogue. Solutions Include: Valve Actuators Fail-Safe Systems Digital Process Control Panels Pneumatic Process Control Panels For sales and technical information, Contact us at: Head Office/Factory: 6194 Notre Dame West Montreal, Quebec H4C 1V4 TOLL-FR: Sales Office: 211 Watline Ave, Unit 205 Mississauga, Ontario L4Z 1P3 T: TOLL-FR: /cowandynamics /company/cowan-dynamics /cowandynamics /+cowandynamics
A SERIES. Double-Acting. Pneumatic Valve Actuator TECHNICAL BROCHURE. Designed & engineered for severe-service applications
A SRIS Double-Acting Pneumatic Valve Actuator Designed & engineered for severe-service applications Service and support www.cowandynamics.com A SRIS Design & Materials Barrel Seals Nitrile O -ring standard.
More informationRP SERIES 200 psi Mill-type Cylinder
Actuation Solutions and Systems for the SERIES 200 psi Mill-type Cylinder Delivering superior long-term performance and value Designed and engineered for severe-service applications Bore Size: 2 to 20
More informationCSY SERIES. Pneumatic Rotary. Actuator. Double-Acting or Spring-Return Torques up to 2,500,000 in-lb Modular Design
CSY SERIES Pneumatic Rotary Actuator Designed & engineered for severe-service applications Double-Acting or -Return Torques up to 2,500,000 in-lb Modular Design Design & Materials NAMUR Mounting Allows
More informationThe Lehigh Miracalube Air Cylinder The Only Real Self-Lube Air Cylinder in the World BENEFITS!
SERIES JHD HEAVY DUTY AIR CYLINDER The Lehigh Miracalube Air Cylinder The Only Real Self-Lube Air Cylinder in the World BENEFITS! The true test of a cylinder is how well it performs in your application.
More informationASP Series Steel Body NFPA Cylinder Line
Series Steel Body NFPA Cylinder Line www.numatics.com Table of Contents Series Features and Benefits 3 Standard Mounts 4 How to Order 5 Port Size Availability 6 Dimensions 7-34 Rod Ends 7 Large Bore 8
More informationModel DFLP Linear Actuator
Features Rugged Long Lasting Construction Dyna-Flo s expert CNC machining process and superior quality parts come together to make DFLP actuators a rugged, long lasting product. DFLP actuators are manufactured
More informationHYDRAULIC HEAVY DUTY
Catalog #HHD-16 12/16 HYDRAULIC HEAVY DUTY Series HHD 3000 PSI RATED 10-25-16 WARNING IMPROPER SELECTION, IMPROPER USE OR FAILURE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN CAN CAUSE PROPERTY DAMAGE,
More informationSeries SIT Hydraulic Cylinders Single acting Internal Thread
ax: (604) 5-0070 Toll ree 1-800-98-1170 Series SIT Hydraulic Cylinders Single acting Internal Thread Pressure:,500 psi Working 3,500 psi Non-Shock Bore Sizes: 1.5 to 3.5 Rod Sizes: to 3.00 Ports: Attachments:
More informationAir/Oil Tanks Air Boosters Cylinder Options Multi-Stage Triple-Rod Basic Cylinders Accessories Technical Data TRA HOW TO ORDER: SERIES TRA (TRIPLE PIS
SERIES TRA TRIPLE ROD NEW HEAVY-DUTY TRIPLE ROD DESIGN TRD s TR Series has been redesigned. The new series, TRA is a Heavy-Duty version of the TR Series. The new series is a drop-in replacement of the
More informationNFPA Double acting imperial cylinders
> > Ø 4... 8 > > Adjustable captive cushion needle > > Constructed of the finest materials > > Magnetic piston standard > > Wide temperature range > > Shock and vibration tested to N 61373, Category 1,
More informationAS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS... 6
AS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS............. 6 Section 6 8 ORDERING INFORMATION For Rod End Dimensions see back cover foldout... Basic Cylinder No Mount.0" to 4.00" For pressure
More informationTie Rod & Welded Cylinders. Buyers. Guide Fluid Power Products
Tie Rod & Welded Cylinders Buyers Guide Fluid Power Products Providing value engineered hydraulic solutions for todays demanding needs Table of Contents 30 Month Warranty...............................................
More informationSERIES PA PNEUMATIC CYLINDERS FOR VALVE ACTUATION BORE SIZE: 3 1/4 TO 20 RATING: 150 PSIG (1000 KPA)
BORE SIZE: 3 /4 TO 0 RATING: 50 PSIG (000 KPA) PNEUMATIC CYLINDERS FOR VALVE ACTUATION FEATURES THE PA SERIES OF VALVE ACTUATORS ARE DESIGNED TO AUTOMATE VALVE OPERATION. THESE ACTUATORS CAN BE ADAPTED
More informationCylinders DIN ISO 6431 and VDMA Bores from 32 to 125 mm
Double acting Standard executions Version Shape of barrel Symbol Type MAGNETIC STANDARD AMA AMT 1 For the magnetic reed switches type ASV see from page 1.110.1. For coupling cylinders/reed swiches/brackets
More informationSERIES PSI OPERATING PRESSURE HEAVY HYDRAULIC DUTY CYLINDER HEAVY DUTY HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC CYLINDERS, INC
CYLINDERS, INC SERIES 2500 3000 PSI ORATING PRESSURE HEAVY DUTY HEAVY HYDRAULIC DUTY CYLINDER HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC PURAKAL P.O. Box 22038 CYLINDERS, INC P.O. Eugene, Box OR 22038 97402-0414
More informationPL-2 Series Medium-Duty Industrial Hydraulic Cylinders BPL-2 PH-2 PH-3 PHX
PL- Series Medium-Duty Industrial Hydraulic Cylinders PHX PH- PL- PH- Contents Features... Specifications / Mountings... Design Features and enefits... - Mounting Information, " to " ore Sizes... 8- Mounting
More informationAir Cylinders Type : ISO-6431 & VDMA-24562
Air Cylinders Type : ISO-6 & VDMA-262 Conform to ISO: 6 & VDMA: 262 standards. Double acting, with adj. cushioning at both ends. sizes : Ø, Ø, Ø, Ø, Ø, Ø0, Ø1, Ø0 & Ø0 Profiled aluminum tube with hard
More informationScotch Yoke Actuators 2016 EDITION. Heavy Duty Pneumatic Actuators SHD and CHD series. The Best Way To Automate Your Process.
The Best Way To Automate Your Process Heavy Duty Pneumatic Actuators SHD and CHD series Scotch Yoke Actuators 2016 EDITION Max-Air Technology, Inc. 751 Hoff Rd O Fallon, Missouri 63366 Tel: +1.636.272.4934
More informationHeavy Duty 3500/5000. psi rating. series. hydraulic cylinders. bulletin 0207XH
3500/5000 psi rating Heavy Duty series XH hydraulic cylinders bulletin 0207XH www.royalcylinders.com 1 Contents Page Description 1 Contents 2 Features Description Mounting Dimensions 3 C Clevis Mount 3
More informationBiffi Morin HP Series actuator
HP series - Direct gas / hydraulic actuator with ductile iron housing and carbon steel cylinders Spring return and double acting actuators Quarter-trun output torques to 240,000 lb. in. Features and benefits
More informationCONTROLS. S98 Pneumatic Actuator
R CONTROLS S98 Actuator Bray International Headquarters Office & USA Manufacturing Houston, Texas +281.894.5454 INTERNATIONAL, Inc. At Bray, our business is helping our customers with their flow control
More informationExtruded Body Cylinders, ISO 6431, ISO compliant Series 61
1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 61 Single or double-acting, magnetic, cushioned Standard and
More informationMasoneilan* 51/52/53 Series
Technical Specifications Rev.E - 01/2018 Masoneilan* 51/52/53 Series Cylinder Actuator BHGE Data Classification: Public Conversion Table All the USCS values are converted to metric values using the following
More informationTie-rod Cylinders, ISO 6431, ISO compliant Series 60
Tie-rod Cylinders, ISO 6431, ISO 15552 compliant Series 60 Single or double-acting, magnetic, cushioned Standard and low friction versions ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with ISO 15552
More informationOperation and Maintenance Instructions for Bettis GVO-C Series GVO-CLP-SR Pneumatic Actuators
Part Number: GVO-CLP-SR.IOM.1003, Rev. 0 Release: March 2016 Operation and Maintenance Instructions for Bettis GVO-C Series GVO-CLP-SR Pneumatic Actuators Part Number: GVO-CLP-SR.IOM.1003, Rev. 0 Table
More informationAIR CYLINDERS cylinders with pro?led barrel / tie rods standardised to ISO double acting. Series tie rods YOUR SELECTION
compact cylinders, standardised to ISO 21287 compatibility for assembly ISO 15552 mountings double acting - Series 449 short stroke cylinders single acting / double acting Series 441 AIR CYLINDERS cylinders
More informationRound Body Minicylinders, DIN/ISO 6432 Series 16, 24 and 25
Round Body Minicylinders, DIN/ISO 6432 Series 16, 24 and 25 Series 16: ø 8-10 - 12 bumpers Series 24: ø 16-20 - 25 bumpers and magnetic piston Series 25: ø 16-20 - 25 adjustable cushion and magnetic piston»»
More informationMEDIUM DUTY HYDRAULIC NFPA STYLE 1 1/2 TO 8 BORE AIR 250 PSI HYDRAULIC 1500 PSI
AIR CYLINDERS & MEDIUM DUTY HYDRAULIC NFPA STYLE 1 1/2 TO 8 BORE AIR 250 PSI HYDRAULIC 1500 PSI CONSTRUCTION FEATURES 1. Rod Wiper Urethane 90A 65 to +220F, large cross section lip type wiper designed
More informationAIR CYLINDER Series A12, A13
A12 - Non magnetic A13 - Magnetic S Double Acting ( Ø32-100 ) mm As per ISO 6431 / CETOP RP43P, RP53P standards Features Adjustable cushioning at both ends Wide varieties of mountings Low friction Long
More informationCylinders ISO Bores from 32 to 125 mm
Cylinders ISO 5552 ores from 32 to 25 mm Double acting Standard executions Version Profile Tube Symbol Type STANDARD MAGNETIC AMA AMT For the magnetic reed switches type ASV and ASC see from page.0.. For
More informationContents. Hydraulic Cylinder
Hydraulic Cylinder Contents Tie Rod Cylinders of 2500psi series----------------------------------------2~3 Tie Rod Cylinders of 3000psi series----------------------------------------4~5 NFPA interchangeable
More informationSingle- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 100 and 125 mm
> Series 90 stainless steel cylinders CATALOGUE > Release 8.8 Series 90 stainless steel cylinders Single- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 00 and 25 mm» In compliance with ISO
More informationSERIES HH (NFPA) CYLINDER
HH SERIES TAB 5 Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.002 to improve bearing surface alignment. SERIES HH (NFPA) CYLINDER HH Rod Lock Reduces cylinder drag and erratic
More information516VX1VSSBIPD Pneumatic actuator - El-O-Matic
DN B 00 mm D E 56VXVSSBIPD Pneumatic actuator - El-O-Matic F E A L DIMENSIONS: (mm) DN L A B PD PE PD D E F Kg PE D E G Kg 5 5 53 6 25 266 286 59, 0 239 259 20 5,7 20 20 52 53 25 273 293 59, 65 258 278
More informationSeries 83. Stainless Steel Mini Cylinder
Stainless Steel Mini Cylinder Magnet included in 7/8 and 1-1/4 bore only in double acting cylinder THEORETICAL CYLINDER FORCE (LBS). Operating Pressures (PSI) Size Action 25 50 75 100 125 150 3/4" Out
More informationSMS Solid Stainless Cylinders
SMS Solid Stainless Cylinders Space Saving and Conventional Lengths Pneumatic to 200 PSI Hydraulic 400 to 500 PSI Non shock /8, /2, 2, 3 Bore 300 Series Stainless Exterior Assures Aesthetics and Function
More informationMT SERIES PNEUMATIC ROTARY ACTUATORS
MT SERIES PNEUMATIC ROTARY ACTUATORS Toll Free 1.888.842.9998 Fax 1.866.842.3144 6 FEATURES COMPACT DESIGN The MAX-AIR rack & pinion pneumatic actuator produces linear torque output in a compact design
More informationMiller JV Series. Medium Duty Hydraulic Cylinders. Up to 1000 PSI Bore Sizes 1" through 8" 18 Mounting Styles. Catalog M September, 2011
Medium Duty Hydraulic Cylinders Catalog M0- September, 0 Up to 000 PSI ore Sizes " through " Mounting Styles AV Series Cylinders Up to 0 PSI Permanently Lubricated AL Series Aluminum Cylinders Up to 0
More informationHYDRAULIC CYLINDERS NFPA STYLE 1 1/2 TO 8 BORE HYDRAULIC 3000 PSI
HEAVY DUTY HYDRAULIC CYLINDERS NFPA STYLE 1 1/2 TO 8 BORE HYDRAULIC 3000 PSI CONSTRUCTION FEATURES 1. Rod Wiper Urethane 90A 65 to + 220F, large cross section lip type wiper designed to protect the bearing
More informationHTR TIE-ROD CYLINDERS H I K M N TUBE OD
1 Brand Cylinders LINE THE HTR Pressure Ratings: 2" - 4" Bore = 2500 PSI, 5" Bore = 2000 PSI BORE (INCH) B C D E F G = J 2.0 1.015 2.125 1.625 1.000 1.000 1.142 2.5 1.015 2.125 1.625 1.000 1.000 1.142
More informationSERIES MH (NFPA) CYLINDER
MH SERIES TAB 58 Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.002 to improve bearing surface alignment. SERIES MH (NFPA) CYLINDER Reduces cylinder drag and erratic operation
More informationPneumatic Cylinders. Series 3A and 3AN. Series 3A and 3AN
Series 3A and 3AN for Heavy-Duty Service n High-Tech Duralon Rod Bearing n State-of-the-Art Rod and Piston Sealing System n Heavy-Duty Piston-to-Rod Connection n1.50" 14.00" Bores n 150 250 psi Pressure
More informationBALL VALVE SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 730 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) Ø L A B PD PE PD C D E F Kg
More informationFA SERIES KNIFE GATE PNEUMATIC CYLINDERS... 8
FA SERIES KNIFE GATE PNEUMATIC CYLINDERS......... 8 section 8 154 ORDERING INFORMATION For Rod End Dimensions see back cover foldout... Dimensional Information FA SERIES DIMENSIONS BASIC DIMENSIONS PLUS
More informationShearseal Knife Gate Valves. Manufactured by TSE
Shearseal Knife Gate Valves Manufactured by TSE Shearseal Design Most knife gate valve manufacturers describe their valve as rugged and dependable. In the Shearseal Valve, these qualities are not idle
More informationSERIES HH WITH HYDRAULIC ROD LOCK
HH LOCK TAB HH Rod Lock HH Options SERIES HH WITH HYDRAULIC LOCK The TRD difference... TRD s floating rod bushing design and RL Series Rod Lock = OPTIMIZED RESULTS and SUPERIOR PERFORMANCE. For rod locks
More informationMorin series B and C actuators. Series C
MORIN series - Ductile iron w/ stainless steel cylinders C series - Ductile iron w/ carbon steel cylinders Spring return and double acting actuators Quarter-turn output torques to 158200 Nm Features and
More informationFSERIES. The Leader in Actuator Technology QUARTER-TURN PNEUMATIC & FLUID POWER ACTUATOR PRODUCT BULLETIN
QUARTER-TURN PNEUMATIC & FLUID POWER ACTUATOR PRODUCT BULLETIN Output Torques to 500,000 in-lb (56,492 Nm) Temperatures from -76ºF to 450ºF (-60ºC to 232ºC) Ductile Iron or Stainless Steel Construction
More informationMT SERIES SALES GUIDE Max-Air Technology Inc. MT Series Pneumatic Actuators. The Best Way To Automate Your Process
The Best Way To Automate Your Process MT SERIES SALES GUIDE Max-Air Technology Inc. MT Series Pneumatic Actuators Max-Air Technology, Inc. 114 Resource Drive Wentzville, MO 63385 Tel +1.636.272.4934 Toll
More informationSeries AM/MM/WM Mill Type Cylinders
ET AH To order this part, call Lifco Hydraulics USA Toll Free at -00-- S S ZE* SS* SW (TYP) FB THRU, () PLACES TE UF WA / EE P* ØE EE P* CD 00 M CW S Series AM/MM/WM Mill Type Cylinders Table of Contents
More informationInch size: ø1.5", ø2", ø2.5", ø3.25", ø4" How to Order. Nil. Air cushion. Both ends. Nil. None N H R. Head end Rod end 400 (4") NCA1-L400 NCA1-F400
NFPA Interchangeable Cylinder: Standard Type Double Acting, Single Rod (Medium Duty) Series NCA1 Inch size: ø1.5", ø2", ø2.5", ø3.25", ø4" Built-in magnet Nil None D W/ auto switch (Magnetic piston) Style
More informationAIR CYLINDER Series A25, A26
A25 - Magnetic A26 - Non-magnetic S Double End Double Acting - Ø32-100 mm As per ISO 15552 / VDMA 24562 standards Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings.
More informationConstruction characteristics. Technical characteristics. End plates Rod Barrel Rod-guide bushing Piston
Construction characteristics nd plates Rod Barrel Rod-guide bushing Piston Seals Cushion adjusting screws die-casting aluminium C3 chromed steel or stainless steel aluminium alloy anodised spheroid bronze
More information2500 PSI STANDARD FEATURES 2500 PSI CYLINDERS
2500 PSI STANDARD FEATURES Intended Use: Double acting applications Rated Pressure: 2500 PSI Material: High Tensile SAE C1045, ground and polished hard chrome plated Barrel Material: High tensile SAE C1026/St52.3
More informationSCOTCH YOKE ACTUATORS
TITOLO TITOLO SCOTCH YOKE ACTUATORS Heavy duty pneumatic actuators SHD and CHD series ATEX GOST -R Quality system: ISO 9000 Max-Air Technology, Inc. 751 Hoff Rd O Fallon, Missouri 63366 Toll Free: 888.842.9998
More informationSMS Solid Stainless Cylinders
SMS Solid Stainless Cylinders Space Saving and Conventional Lengths Pneumatic to 200 PSI Hydraulic 400 to 500 PSI Non shock /8,, 2, 3 Bore 300 Series Stainless Exterior Assures Aesthetics and Function
More informationHH SERIES: HEAVY DUTY INDUSTRIAL HYDRAULIC TRD BIMBA. company
HH SERIES: HEAVY DUTY INDUSTRIAL HYDRAULIC TRD a BIMBA company The TRD difference... Precision machined throughout. We started in business as precision machinists. Every component is machined in a manner
More informationISO CYLINDERS SERIES HCR (High Corrosion Resistance) ACTUATORS
ISO 15552 CYLINDERS SERIES HCR (High Corrosion Resistance) 1 ISO 15552 CYLINDERS SERIES HCR (High Corrosion Resistance) In some applications, the cylinders are exposed to aggressive environments (e.g.
More informationMedium Duty 1.5 ~ 4 Bore 12 Different NFPA Mounting Options Non-Rotating Option Tandem Cylinder Option Auto Switch Capable
N304 Air Cylinder NCA1 Series NFPA Interchangeable Medium Duty 1.5 ~ 4 Bore 12 Different NFPA Mounting Options Non-Rotating Option Tandem Cylinder Option Auto Switch Capable NFPA Interchangable Air Cylinder
More informationMobile Cylinder Div. Standard Build Series. Catalog HY /US Rev C
Mobile Cylinder Div. Standard Build Series Catalog HY18-0014/US Rev C WARNING - USER RESPONSIBILITY FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE
More informationRPDA Series Rotary Piston Double Acting Actuators
RPDA Are Suited for Below Grade Regulation and "Bleed to Pressure System" Applications Description: The RPDA Rotary Piston Double Acting Actuator is designed for heavy duty control applications the require
More informationQSERIES. The Leader in Actuator Technology QUARTER-TURN PNEUMATIC & FLUID POWER ACTUATOR PRODUCT BULLETIN
QUARTER-TURN PNEUMATIC & FLUID POWER ACTUATOR PRODUCT BULLETIN Output Torques to 21,000 in-lb (2373 Nm) Temperatures from -76ºF to 450ºF (-60ºC to 232ºC) Ductile Iron or Stainless Steel Construction Double-Acting
More informationUT SERIES PNEUMATIC ROTARY ACTUATORS
UT SERIES PNEUMATIC ROTARY ACTUATORS Toll Free 1.888.842.9998 Fax 1.866.842.3144 6 FEATURES COMPACT DESIGN The MAX-AIR rack & pinion pneumatic actuator produces linear torque output in a compact design
More informationAIR CYLINDER Series A23, A24
A23 - Magnetic A24 - Non-magnetic Double Acting s (Square type) Ø32-125 mm As per ISO 15552 / VDMA 24562 standards. Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings
More informationSize: 1/4 to 3. Material: 316 Stainless Steel, Carbon Steel,
Size: 1/4 to 4 Material: 316 Stainless Steel, Carbon Steel, Alloy 20, Hastelloy C, Monel, Brass, SW, BW, BSPT, 150#, 300#, 600#, Flanged Pressure: Vacuum to 3000 PSI* -50 to 600 F* ASME B16.34 Design Bottom
More informationGP & GH Range. Pneumatic and Hydraulic Actuators for Quarter-Turn Valves. Established Leaders in Actuation Technology
GP & GH Range Pneumatic and Hydraulic Actuators for Quarter-Turn Valves Established Leaders in Actuation Technology Rotork Actuators Quality Controlled Rotork is a global leader in valve actuation technology.
More informationWST Stopper Cylinder. Series WST. Specifications. How to adjust the shock absorber. Precautions. Shock absorber replacement
WST Stopper Cylinder Specifications Features Media Clean dry compressed air Operating Pressure Range 22 to 102 psi (1.5 to 7 Bar) Max* Pressure 145 psi (10 Bar) Operating Temperature Range 32 to 140 F
More informationSeries OCG Pneumatic Cylinders
New Models The Price Alternative Series OCG Pneumatic Cylinders www.phdinc.com (8) 624-811 and Rebuildable round body cylinders 6 bore sizes standard stroke lengths High speed/double acting OCG2 ORDERING
More informationMorin Figure HP Actuator
1,500 psig Operating Pressure Rating Direct Gas/Hydraulic ctuators Ductile Iron/Stainless Steel Quarter-turn Double cting and Spring Return Models Features and enefits High pressure construction eliminates
More informationSeries VD Pneumatic diaphragm. actuators.
Series VD Pneumatic diaphragm actuators Metso's Neles series VD actuators are exclusively developed for linear valves. They provide safe and reliable operation and are well suited for many different kind
More informationGEAR ACTUATORS For multi-turn valves
GEAR ACTUATORS For multi-turn valves VEAN GEAR ACTUATORS offer a superior combination of features for reliable and dependable service for multi-turn valves. Engineered to meet all applications and environmental
More informationToll-free: 1 (844) MAGISTER
About Us.................................................... 2 Production................................................... 3 Quality Policy.................................................4 Quality Control................................................5
More informationCOMMERCIAL. Product PRofile
Product PRofile 2 PRODUCT OVERVIEW INtroduction At Bray International, Inc., our business is helping our customers with their flow control requirements. Our modular product line of butterfly, ball and
More informationCylinders HD1 Cylinders
Cylinders HD Cylinders Cylinders For Abusive Conditions Operating Parameters Reference Control Valves Cylinders Specialty Valves Production Devices Index Combining NFPA dimensional interchangeability and
More informationMORIN. Pneumatic and hydraulic actuators EXPERIENCE MORE
MORIN Pneumatic and hydraulic actuators EXPERIENCE MORE Stainless steel quarter-turn actuators MORIN S Stainless steel spring-return and double-acting pneumatic quarter-turn actuators For remote control
More informationSeries HB Solid Brass Cylinders
Series HB Solid Brass Cylinders For General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8,, Bores Magnetic piston available to operate Aurora stainless proximity
More informationHEAVY DUTY PNEUMATIC CYLINDERS
HEAVY DUTY PNEUMATIC CYLINDES Features: Conforms to ISO:30 standard. Double Acting, with adj. cushioning at both ends. Sizes: Ø, Ø, Ø, Ø, Ø, Ø0, Ø1, Ø0, Ø0 & Ø0. : Other bore sizes on request Seamless
More informationBiffi Morin S series actuators
Stainless steel spring return and double acting pneumatic quarter-turn actuators Output torques to 26890 Nm Features and benefits General applications For remote control of any quarter-turn application:
More informationSERIES PRA AND TRB ISO PNEUMATIC CYLINDERS
SERIES PRA AND TRB ISO 15552 PNEUMATIC CYLINDERS Series PRA and TRB Pneumatic ISO 15552 Cylinders The next generation of ISO cylinders from AVENTICS The Series PRA and TRB cylinder series represent consistent
More informationKEYSTONE PNEUMATIC ACTUATOR FIGURE 738
The F78 is a linear pneumatic actuator, designed especially for use on linear actuated valves FEATURES Suits all linear actuated valves. The Keystone F78 pneumatic actuator series is engineered to provide
More informationGT Range. Rack & Pinion Actuators for Rotary Valve Control. Keeping the World Flowing
GT Range Rack & Pinion Actuators for Rotary Valve Control Keeping the World Flowing Rotork Actuators Quality Controlled Since the company was founded in 1957, Rotork has become the standard for excellence
More informationHY-SPEC CATALOGUE - HYDRAULIC CYLINDERS. Hydraulic Cylinders. Visit our website. Catalogue.
HY-SPEC CATALOGUE - HYDRAULIC CYLINDERS Hydraulic Cylinders Catalogue Visit our website www.hy-spec.com HY-SPEC PRODUCT FAMILY HY-SPEC CATALOGUE - AC/DC POWER PACKS HY-SPEC CATALOGUE - GAS ENGINE PRODUCTS
More informationHeavy Duty Actuators CONTROLS. Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to 1,600,000 in. lbs. Double Acting and Spring Return
CONTROLS Division of A-T Controls Heavy Duty Actuators Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to,600,000 in. lbs. Double Acting and Spring Return THD S E R I E S The Triac line
More informationTork-Mor Series Vane Style Hydraulic Rotary Actuators
Vane Style Hydraulic Rotary Actuators Vane Actuators Tork-Mor HRN Contents Features...2 Ordering Information...3 Specifications...4 Dimensional Data...5 Mounting... 6-7 Shaft...7 Limit Switch Actuator...7
More informationSeries 6PF Positioning Feedback cylinders 1/ Double-acting low friction, magnetic ø 50, 63, 80, 100, 125 mm
CATALOGUE > Release 8.8 > Series 6PF cylinders Series 6PF Positioning Feedback cylinders Double-acting low friction, magnetic ø 50, 63, 80, 00, 25 mm»» In compliance with ISO 5552 standards and with the
More informationProvenair Series AN Cylinders Parts List / Service Instructions
Provenair Series AN Cylinders Parts List / Service Instructions 1-1/2, 2, 2-1/2, 3-1/4 and 4 BORES EXTRUDED BARREL CONSTRUCTION 5, 6, 8 and 10 BORES TIE ROD CONSTRUCTION TYPE: Aluminum, repairable, square
More informationModel DFC and DFO Valve Actuator
Features Reliable Design Formed diaphragm has no friction with other moving parts allowing maintenance free operation through years of constant cycling. Protective Coatings External surfaces are either
More informationIndustrial Welded Cylinders
Industrial Welded ylinders Technical Manual Series WH Table of ontents Design Features and Specifications...2 How to Order...3 WH Mounting Dimensions...4 Rod End Styles...7 Technical Data...8 Design Features
More informationQSERIES. The Leader in Actuator Technology QUARTER-TURN PNEUMATIC & FLUID POWER ACTUATOR PRODUCT BULLETIN
QUARTER-TURN PNEUMATIC & FLUID POWER ACTUATOR PRODUCT BULLETIN Output Torques to 21,000 in-lb (2373 Nm) Temperatures from -76ºF to 450ºF (-60ºC to 232ºC) Ductile Iron or Stainless Steel Construction Double-Acting
More informationElectric Flanged PN16 Cast Iron Ball Valve
Electric actuator direct mounted Type: E4813BS Electric actuator fitted via kit Main J3 Smart electric actuator features: LED light for continual visual actuator status feedback. Fully weatherproof smart
More information7 MPa APPLICATION HYDRAULIC CYLINDER (HC1-X* SERIES) φ40 TO φ100
7 MPa APPLICATION HYDRAULIC CYLINDER (HC-X* SERIES) φ40 TO φ00 The HC-X* series cylinders are the successors of the HC-**X3 series cylinders. The previous series has been redesigned for improved ease of
More informationStainless Steel Cylinders DIN ISO 6431 and VDMA Bores from 32 to 200 mm
Bores from 32 to 200 mm Double acting Standard executions Version Symbol TYP MAGNTIC STANDARD AMX STAINLSS STL For the magnetic reed switches type ASV see from page 1.110.1. For coupling cylinders/reed
More informationACT-74. Short stroke cylinders DC/91000/M, DC/93000/M Single acting Ø mm. Actuators DC/9 / /
Actuators Short stroke cylinders DC/91000/M, DC/93000/M Single acting Ø 12... 63 mm One third the basic length of a corresponding ISO/VDMA model Low friction, long life seal design Fully non-corrodible
More informationAG SERIES HYDRAULIC CYLINDERS 1.5 INCH 2 INCH 2.5 INCH 3 INCH 3.5 INCH 4 INCH 5 INCH BHC-8
AG SERIES HYDRAULIC CYLINDERS 1.5 INCH 2 INCH 2.5 INCH 3 INCH 3.5 INCH 4 INCH 5 INCH BOSS Hydraulics 19 Ricketts Rd, Mt Waverley, VIC 3149 P: +61 3 9562 8800 F: +61 3 9562 8080 E: sales@pthydraulics.com.au
More informationBALL VALVE SERIES Pneumatic actuator - Actreg
B C D E BALL VALVE - 516 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B AD AD C D E F Kg AS C D
More informationDouble acting, cushioned, magnetic Ø mm
CATALOGUE > Release 8.7 > Series 40 cylinders Series 40 cylinders Double acting, cushioned, magnetic 60-200 - 250-320 mm In compliance with ISO 5552 standards and with the previous DIN/ISO 643 - VDMA 24562
More informationParallel Grippers- DPW DIRECTCONNECT Wide Body Series
DPW SERIES 1.196 Parallel Grippers- DPW DIRECTCONNECT Wide Body Series DIRECTCONNECT Connectivity: DIRECTCONNECT Tapped and Dowel mounting on body. Large or Wide Parts: Wide body design provides secure
More informationBIFFI MORIN S SERIES ACTUATORS
Stainless steel spring return and double acting pneumatic quarter-turn actuators Output torques to 240,000 lb.in. FEATURES AND BENEFITS GENERAL APPLICATIONS For remote control of any quarter-turn application:
More informationCylinders Small Bore Tie Rod
Cylinders Small Bore Tie Rod Reference Control Valves Cylinders Specialty Valves Production Devices Index Cylinder Materials Heads: Tubes: Piston: Rod: Bearing: Piston and Rod Seals: Rod Wiper: Tie Rods:
More informationEQ Series OEM Aluminum NFPA Interchangeable Cylinder Line
Series OEM Aluminum NFPA Interchangeable Cylinder Line www.numatics.com Table of Contents EQ Series Features and Benefits 3 Standard Mounts 4 How to Order 5 Rod Ends 6 Dimensions 7 How to Order - EQ Series
More information