Toll-free: 1 (844) MAGISTER
|
|
- Phillip Harvey
- 5 years ago
- Views:
Transcription
1
2 About Us Production Quality Policy Quality Control Technology Tie-Rod Hydraulic Cylinders 2500 PSI Cross Tube Welded Hydraulic Cylinders 3500 PSI Clevis Welded Hydraulic Cylinders 3500 PSI Pin Eye Welded Hydraulic Cylinders 3500 PSI Tang Welded Hydraulic Cylinders 3500 PSI Loader Welded Hydraulic Cylinders 3500 PSI Snow Plow Single Acting Hydraulic Cylinders 2500 PSI Swivel Eye Welded Hydraulic Cylinders 3500 PSI Log Splitter Hydraulic Cylinders 3500 PSI Hydraulic Power Units Directional Control Valves Gear Pumps Fluid Coolers Pivot Pins & Bushings Repair Kits Custom Design Hydraulic Cylinders Toll-free: 1 (844) MAGISTER
3 CATALOG
4 2 Year Limited Warranty & Replacement Service. 2 Toll-free: 1 (844) MAGISTER
5 ited Warranty 2 Year Lim- 3
6 4 Toll-free: 1 (844) MAGISTER
7 5
8 6 Toll-free: 1 (844) MAGISTER
9 Swivel Eye Ends: Durable steel items Swivel Items: Bearings Clips: Bearing Securing Clip 7
10 TIE ROD HYDRAULIC CYLINDERS 2500 PSI Applications: Tie-rod Double Acting Hydraulic Cylinder Tube: Honed cold drawn tube Rod: High tensile ground & polished hard chrome plated rod Piston: High tensile steel Base end: Ductile iron clevis end mount Rod end: Screw-on ductile iron clevis item Piston seals: High quality compact seals for excellent performance Rod seals: Standard polyurethane rod seal with inner O-ring, POM-C wear rings with rod wiper Warranty: 2 year limited warranty Pressure: 2500 PSI Color: Black 8 Toll-free: 1 (844) MAGISTER
11 TIE ROD HYDRAULIC CYLINDERS 2500 PSI 9
12 TIE ROD HYDRAULIC CYLINDERS 2500 PSI 10 Toll-free: 1 (844) MAGISTER
13 TIE ROD HYDRAULIC CYLINDERS 2500 PSI 11
14 WELDED HYDRAULIC CYLINDERS 3500 PSI CROSS TUBE 2 Year Limited Warranty PSI 12 Toll-free: 1 (844) MAGISTER
15 WELDED HYDRAULIC CYLINDERS 3500 PSI CROSS TUBE 13
16 WELDED HYDRAULIC CYLINDERS 3500 PSI CROSS TUBE 14 Toll-free: 1 (844) MAGISTER
17 WELDED HYDRAULIC CYLINDERS 3500 PSI CROSS TUBE 15
18 WELDED HYDRAULIC CYLINDERS 3500 PSI CROSS TUBE 16 Toll-free: 1 (844) MAGISTER
19 WELDED HYDRAULIC CYLINDERS 3500 PSI CROSS TUBE 17
20 WELDED HYDRAULIC CYLINDERS 3500 PSI CLEVIS END 18 Toll-free: 1 (844) MAGISTER
21 WELDED HYDRAULIC CYLINDERS 3500 PSI CLEVIS END 19
22 WELDED HYDRAULIC CYLINDERS 3500 PSI CLEVIS END 20 Toll-free: 1 (844) MAGISTER
23 WELDED HYDRAULIC CYLINDERS 3500 PSI CLEVIS END 21
24 WELDED HYDRAULIC CYLINDERS 3500 PSI PIN EYE 22 Toll-free: 1 (844) MAGISTER
25 WELDED HYDRAULIC CYLINDERS 3500 PSI PIN EYE 23
26 WELDED HYDRAULIC CYLINDERS 3500 PSI PIN EYE 24 Toll-free: 1 (844) MAGISTER
27 WELDED HYDRAULIC CYLINDERS 3500 PSI PIN EYE 25
28 WELDED HYDRAULIC CYLINDERS 3500 PSI TANG Applications: Welded Double Acting Hydraulic Cylinder. Tube: High tensile honed cold drawn tube. Rod: High tensile ground & polished hard chrome plated rod. Gland: Precision threaded gland with wear rings for long life. Piston: High tensile steel for heavy duty applications. Base ends: Welded steel tang mounts. Piston seals: Top quality five component compact seals for excellent performance. Rod seals: Standard U-cup polyurethane rod seal with inner O-ring, POM-C wear rings and polyurethane wiper. Warranty: 2 year limited warranty. Pressure: 3500 PSI Color: Black. 26 Toll-free: 1 (844) MAGISTER
29 WELDED HYDRAULIC CYLINDERS 3500 PSI TANG 27
30 WELDED HYDRAULIC CYLINDERS 3500 PSI FOR LOADERS 28 Toll-free: 1 (844) MAGISTER
31 WELDED HYDRAULIC CYLINDERS 3500 PSI FOR LOADERS 29
32 SNOW PLOW SINGLE ACTING HYDRAULIC CYLINDERS 2500 PSI 30 Toll-free: 1 (844) MAGISTER
33 SNOW PLOW SINGLE ACTING HYDRAULIC CYLINDERS 2500 PSI 31
34 SWIVEL EYE WELDED HYDRAULIC CYLINDERS 3500 PSI 32 Toll-free: 1 (844) MAGISTER
35 SWIVEL EYE WELDED HYDRAULIC CYLINDERS 3500 PSI 33
36 LOG SPLITTER HYDRAULIC CYLINDERS 3500 PSI 34 Toll-free: 1 (844) MAGISTER
37 LOG SPLITTER HYDRAULIC CYLINDERS 3500 PSI 35
38 HYDRAULIC POWER UNITS 36 Toll-free: 1 (844) MAGISTER
39 HYDRAULIC POWER UNITS 37
40 DIRECTIONAL CONTROL VALVES Operating Temperature: -40C...+60C Hydraulic liquid: Mineral based oil/hydraulic oil Adjustable relief: Up to 3600 PSI Assembly: Complete with handles Spools: From one to four Material: Cast Iron Ports: SAE O-ring boss 38 Toll-free: 1 (844) MAGISTER
41 GEAR PUMPS & FLUID COOLERS GPM: From 3.1 GPM to 11.8 GPM Ports: SAE 10 & SAE 12 Shaft: Keyed shaft Capacity: 21,000 40F Noise: Extremely low noise 55dBa) Motor: 0.75 kw 4p B5 115/230V 60Hz Helical gear pump: H20-A-19-X-066 (19 cc/rev) Thermal switch: TC2 UL/CSA with a hose kit Filter kits are available upon request CALL FOR PRICING & AVAILABILITY 39
42 PIVOT PINS & BUSHINGS 40 Toll-free: 1 (844) MAGISTER
43 REPAIR KITS 41
44 CUSTOM DESIGN HYDRAULIC CYLINDERS 42 Toll-free: 1 (844) MAGISTER
45 CUSTOM DESIGN HYDRAULIC CYLINDERS
46 CONTACT US TO BECOME A DISTRIBUTOR MAGISTER HYDRAULICS 175 Christie Street, Newark NJ Toll-free: 1 (844) MAGISTER Local: 1 (973) Fax: 1 (973) Info: info@magisterhyd.com Web:
2500 PSI STANDARD FEATURES 2500 PSI CYLINDERS
2500 PSI STANDARD FEATURES Intended Use: Double acting applications Rated Pressure: 2500 PSI Material: High Tensile SAE C1045, ground and polished hard chrome plated Barrel Material: High tensile SAE C1026/St52.3
More informationContents. Hydraulic Cylinder
Hydraulic Cylinder Contents Tie Rod Cylinders of 2500psi series----------------------------------------2~3 Tie Rod Cylinders of 3000psi series----------------------------------------4~5 NFPA interchangeable
More informationHY-SPEC CATALOGUE - HYDRAULIC CYLINDERS. Hydraulic Cylinders. Visit our website. Catalogue.
HY-SPEC CATALOGUE - HYDRAULIC CYLINDERS Hydraulic Cylinders Catalogue Visit our website www.hy-spec.com HY-SPEC PRODUCT FAMILY HY-SPEC CATALOGUE - AC/DC POWER PACKS HY-SPEC CATALOGUE - GAS ENGINE PRODUCTS
More informationSERIES PSI OPERATING PRESSURE HEAVY HYDRAULIC DUTY CYLINDER HEAVY DUTY HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC CYLINDERS, INC
CYLINDERS, INC SERIES 2500 3000 PSI ORATING PRESSURE HEAVY DUTY HEAVY HYDRAULIC DUTY CYLINDER HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC PURAKAL P.O. Box 22038 CYLINDERS, INC P.O. Eugene, Box OR 22038 97402-0414
More informationHTR TIE-ROD CYLINDERS H I K M N TUBE OD
1 Brand Cylinders LINE THE HTR Pressure Ratings: 2" - 4" Bore = 2500 PSI, 5" Bore = 2000 PSI BORE (INCH) B C D E F G = J 2.0 1.015 2.125 1.625 1.000 1.000 1.142 2.5 1.015 2.125 1.625 1.000 1.000 1.142
More informationSeries SIT Hydraulic Cylinders Single acting Internal Thread
ax: (604) 5-0070 Toll ree 1-800-98-1170 Series SIT Hydraulic Cylinders Single acting Internal Thread Pressure:,500 psi Working 3,500 psi Non-Shock Bore Sizes: 1.5 to 3.5 Rod Sizes: to 3.00 Ports: Attachments:
More informationLION HYDRAULIC TIE-ROD CYLINDERS
LION HYDRAULIC TIE-ROD CYLINDERS 2 and 2-1/2 have 3/8 NPT Ports Rest have 1/2 NPT ports Double Ported NPFT Inline Ports M1 LH SERIES 3000 PSI Size Inches Pin to Pin Our Price Bore & Rod Center Cylinder
More informationField-Mate Series Agricultural Cylinders. ASAE Interchangeable HYDRO-LINE
Field-Mate Series Agricultural Cylinders ASAE Interchangeable HYDRO-LINE Table Of Contents How to Order a Field-Mate Cylinder...page 2 Cylinder Port Options and Rod Requirements by Stroke...page 2 Field-Mate
More information4-Way Directional Control Valve With Hydraulic Kick Out
Engineering & Manufacturing Solutions 4-Way Directional Control Valve With Hydraulic Kick Out Specifications: Rated for 0-18 gpm (0-68.1 lpm) Rated for 3000 psi (207 bar) Weighs 5-1/2 lbs. (2.5 kg) 30
More informationCylinders. Series TQ Agricultural Cylinders. Vickers. Nominal Pressure: 2500 psi
Vickers Cylinders Series TQ Agricultural Cylinders Nominal Pressure: 500 psi Released 10 91 113A Series TQ Hydraulic Cylinders Designed for Agricultural Applications Features Working pressure to 500 psi
More informationCHAIN & HOOKS. Proof Coil Chain Grade 28. Transport Chain Grade 70
Proof Coil Chain Grade 28 Proof coil chain is suitable for use as towing chain, logging,fencing, trailer safety chain, boat anchors, security barriers or other general purposes where chain of high tensile
More informationAG SERIES HYDRAULIC CYLINDERS 1.5 INCH 2 INCH 2.5 INCH 3 INCH 3.5 INCH 4 INCH 5 INCH BHC-8
AG SERIES HYDRAULIC CYLINDERS 1.5 INCH 2 INCH 2.5 INCH 3 INCH 3.5 INCH 4 INCH 5 INCH BOSS Hydraulics 19 Ricketts Rd, Mt Waverley, VIC 3149 P: +61 3 9562 8800 F: +61 3 9562 8080 E: sales@pthydraulics.com.au
More informationSTABILIZER STABILIZER CYLINDERS
STABILIZER RAM Mechanical Locking Stabilizer cylinders replace manual systems used to position equipment at a desired location and height. Traditional methods to secure equipment are the use of crank type
More informationOUR MISSION IS FOR YOU TO ACHIEVE YOUR GOALS BY PROVIDING INNOVATIVE & QUALITY PRODUCTS.
OUR MISSION IS FOR YOU TO ACHIEVE YOUR GOALS BY PROVIDING INNOVATIVE & QUALITY PRODUCTS. FOR ALL YOUR HYDRAULIC NEEDS www.chchydraulic.com VALVES AND BLOCKS BLOCK MANIFOLDS Hydro Custom manifolds allows
More informationKRAC KC-600 PLOW PARTS MANUAL
PLOW PARTS MANUAL RWF INDUSTRIES 873 Devonshire Ave., Woodstock, Ontario N4S 8Z4 Tel: (519) 421-0036 Toll Free: 1-800-263-1060 Fax: (519) 421-0028 Email: parts@rwfbron.com GENERIC JANUARY 2015 THE INFORMATION
More informationTie Rod & Welded Cylinders. Buyers. Guide Fluid Power Products
Tie Rod & Welded Cylinders Buyers Guide Fluid Power Products Providing value engineered hydraulic solutions for todays demanding needs Table of Contents 30 Month Warranty...............................................
More informationTABLE OF CONTENTS. Accessories. Filler Breather 7 Filler Heads 11 Foot Brackets 6 J. Jaw Couplings 9 Jaw Couplings - Dimensions/HP ratings 8 S
accessor i es TABLE OF CONTENTS Accessories F Filler Breather 7 Filler Heads 11 Foot Brackets 6 J Jaw Couplings 9 Jaw Couplings - Dimensions/HP ratings 8 S Strainers 12 Stroke Limiter 3 Subplates 10 BORE
More informationSINGLE ACTING TELESCOPIC
SINGLE TING TELESOPI RM is pleased to offer a full line of standard telescopic designs for your equipment. These designs are pre-engineered using in stock material and internal components for quick order
More informationSUPERIOR CONSTRUCTION FEATURES SERIES B AIR CYLINDERS, 1 2" THRU 2" BORE SIZE MAXIMUM PSI 250
SUPERIOR CONSTRUCTION FEATURES SERIES B AIR CYLINDERS, 1 2" THRU 2" BORE SIZE MAXIMUM PSI 250 ALUMINUM HEADS & CAPS LARGE PORTS PISTON PACKING PISTON WIPER BRONZE BEARING PACKING TUBE SEAL CYLINDER TUBE
More informationVeljan Gear Pumps. 'B' Series Features:
'' Series Features: Self-priming pumps Heavy duty sleeve bushing design in a small frame size Displacements from 9.8cc/rev to 39.9cc/rev Working pressures up to bar Speeds up to rpm Flows up to 10.5gpm
More informationSeries AM/MM/WM Mill Type Cylinders
ET AH To order this part, call Lifco Hydraulics USA Toll Free at -00-- S S ZE* SS* SW (TYP) FB THRU, () PLACES TE UF WA / EE P* ØE EE P* CD 00 M CW S Series AM/MM/WM Mill Type Cylinders Table of Contents
More informationTABLE OF CONTENTS. TyRod TM by RAM Website... Contact Us... RAMLOK TM Wirelock Series... 28
HYDRAULIC CYLINDERS TABLE OF CONTENTS About... Industries Served... ISO Quality System... Machining Capabilities... Heavy Duty... Big Bore... Smart Sensor... Stabilizer - Standard... Stabilizer - Ball
More informationHYDRAULIC BREAKER HAMMER HB 50 J HAMMER HB 50 L HAMMER HB 50 U
PARTS MANUAL ver. 1.1 PMHB50ENG.051011 HYDRAULIC BREAKER HB 50 J HB 50 L HB 50 U Serial No. TRK500005-UP TRK510005-UP TRK520005-UP TABLE OF CONTENTS 1. Housing unit 50J... 4 2. Housing unit 50L... 6 3.
More informationINDEX BACKHOE WOODS BH750WD PARTS CATALOG HOME TRACTORS ATTACHMENTS. Backhoe Nomenclature
R Ingersoll BACKHOE WOODS BH750WD PARTS CATALOG 8-3060 HOME TRACTORS ATTACHMENTS BUCKETS... 7 CONTROLS...9 CYLINDERS Swing and Bucket...13 CYLINDERS Boom, Dipperstick and Stabilizer...15 DECALS...17 DIPPERSTICK...7
More informationVeljan Gear Pumps. E' Series Features:-
E' Series Features:- Heavy duty sleeve bushing design in a small frame size Displacements from 43.5cc/rev to 146.5cc/rev Working pressures up to 240bar Speeds up to 3500rpm Flows up to 38.7gpm High strength
More informationGear Housing Widths 1.00" 1.25" 1.50" 1.75" 2.00" 2.25" 2.50" Gear Housing Widths / Flow Rate [ VGP - D Series ]
'D' Series Features:- Heavy duty sleeve bushing design in a small frame size Displacements from 20.6cc/rev to 104.2cc/rev Working pressures up to 240bar Speeds up to 3500rpm Flows up to 27.5gpm High strength
More informationSPUR GEAR PRODUCT LINE: CAST IRON PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE. Section 1451 Page 1451.
Page 1451.1 TABLE OF CONTENTS Features & Benefits...2 Typical Applications...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Component
More informationML SERIES. Double-Acting Hydraulic Valve Actuator. Thrusts up to 1,500,000 lbs SIL-3 Capable GT3 Triple Seal Gland for Severe Service Applications
Actuation Solutions and Systems for the World s Most Challenging nvironments ML SRIS Double-Acting Hydraulic Valve Actuator Designed & ngineered for Severe-Service Applications Thrusts up to 1,500,000
More informationPARTS MANUAL KA-3500PT PISTON TYPE PUMP INDEX
PARTS MANUAL KA-500PT PISTON TYPE PUMP INDEX - Parts Page Drawing page - Fluid End Detail page - Piston Assembly, Liner & Pony Rod Detail page - Water Manifold Assembly Detail page 5 - Oil Manifold Assembly
More informationDISCOUNT TRACTOR PARTS.
HYDRAULIC PRODUCT CATALOGUE Published September 2012 Hydraulic Rams, Control Valves, Hydraulic Hose Reusable Hydraulic Fittings Hydraulic unions and Fittings Hydraulic Pumps DISCOUNT TRACTOR PARTS www.discounttractorparts.co.nz
More informationSERIES PA PNEUMATIC CYLINDERS FOR VALVE ACTUATION BORE SIZE: 3 1/4 TO 20 RATING: 150 PSIG (1000 KPA)
BORE SIZE: 3 /4 TO 0 RATING: 50 PSIG (000 KPA) PNEUMATIC CYLINDERS FOR VALVE ACTUATION FEATURES THE PA SERIES OF VALVE ACTUATORS ARE DESIGNED TO AUTOMATE VALVE OPERATION. THESE ACTUATORS CAN BE ADAPTED
More informationHYDRAULIC PRODUCT CATALOGUE
HYDRAULIC PRODUCT CATALOGUE Hydraulic Rams, Control Valves, Hydraulic Hose Reusable Hydraulic Fittings Hydraulic unions and Fittings Hydraulic Pumps DISCOUNT TRACTOR PARTS www.discounttractorparts.co.nz
More informationHYDRAULICS. TX420 & & lower. Hydraulic Tandem Pump Removal. 4. Remove the LH side panel (Fig. 0388).
TX420 & 425 240000299 & lower 4. Remove the LH side panel (Fig. 0388). Hydraulic Tandem Pump Removal Note: Cleanliness is a key factor in a successful repair of any hydraulic system. Thoroughly clean all
More informationParts Catalog YOUR BEST RESOURCE FOR WORLD-CLASS HYDRAULIC PRODUCTS
Parts Catalog YOUR BEST RESOURCE FOR WORLD-CLASS HYDRAULIC PRODUCTS This catalog contains the hydraulic cylinder components and technical information necessary for you to grow your business and most important,
More informationSection 6. HYDRAULICS HYDRAULICS Section 6. Section 6.1 Breather Plugs... 3 Bulk Hydraulic Hose... 5 Clevis Pins... 3
Section 6 Section 6.1 Breather Plugs... 3 Bulk Hydraulic Hose... 5 Clevis Pins... 3 Cylinders 6.2 Hydraulic Cylinder Seal Kits... 3 Hydraulic Toplink Cylinders... 3 Tie Rod Hydraulic Cylinders... 2 Section
More informationPURAKAL SERIES 100 TABLE OF CONTENTS
TABLE OF CONTENTS How to Order Cylinder......................... Repair Kit......................... Seal Kit......................... Warranty......................... Parts List.........................
More informationStandard Product Index
Standard Product Index Hydraulic Cylinder and Accessories Section Table of Contents Page C2 Custom... Bores up to 20 diameter welded and 5 tie-rod Welded... Bores up to 8 diameter Tie-Rod... Strokes up
More informationD SERIES HYDRAULIC PUMP
uk distributor for D SERIES HYDRAULIC PUMP quality products for mechanical & fluid power jbj Techniques Limited, www.jbj.co.uk Introduction to Concentric D Series Hydraulic Pumps Concentric offers one
More informationSeries HOL-W Welded Construction Hydraulic Cylinders
Series HOL-W Welded Construction Hydraulic Cylinders Description Series HOL-W hydraulic cylinders are available in Industrial and Marine specifications, they are of a heavy duty welded construction and
More informationASP Series Steel Body NFPA Cylinder Line
Series Steel Body NFPA Cylinder Line www.numatics.com Table of Contents Series Features and Benefits 3 Standard Mounts 4 How to Order 5 Port Size Availability 6 Dimensions 7-34 Rod Ends 7 Large Bore 8
More informationVIKING SG SERIES SEALLESS MAG DRIVE PUMPS
SERIES SG-04, -05, -07, -0, -4 (Cast Iron) Section 34.3 Page 34.3. OPERATING RANGE: SG Pumps (Cast Iron Mag Drive) and SGN (Ductile Iron Mag Drive) Displacements No. 23 SG and 7 SGN 0.06 to 90 (SG) and
More informationTELESCOPIC CYLINDERS FROM PRINCE
TELESCOPIC CYLINDERS FROM PRINCE Double & Single Acting C24 CATC 24-10-11-01 FEATURES OF THE PRINCE TELESCOPIC CYLINDER 1. GLAND CAP All steel, externally threaded gland caps provide adjustment of the
More informationMobile Cylinder Div. Standard Build Series. Catalog HY /US Rev C
Mobile Cylinder Div. Standard Build Series Catalog HY18-0014/US Rev C WARNING - USER RESPONSIBILITY FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE
More informationCompressor Recording Data Book
Compressor Recording Data Book ARIEL RESPONSE CENTER SPARE PARTS ORDER ENTRY US/Canada...888.397.7766 International..+1 740.397.3602 @ Ariel Response Center...arc@arielcorp.com @ Spare Parts...spareparts@arielcorp.com
More informationLOGGING/FORESTRY PRODUCT OVERVIEW POWER TAKE-OFFS AND HYDRAULIC COMPONENTS
LOGGING/FORESTRY PRODUCT OVERVIEW POWER TAKE-OFFS AND HYDRAULIC COMPONENTS Muncie Power Products, Inc. is a proud manufacturer of power take-offs and fluid power components for applications within the
More informationRP SERIES 200 psi Mill-type Cylinder
Actuation Solutions and Systems for the SERIES 200 psi Mill-type Cylinder Delivering superior long-term performance and value Designed and engineered for severe-service applications Bore Size: 2 to 20
More informationSERVICE PARTS MANUAL
SERVICE PARTS MANUAL 9, 9T & SERIES SNOW PLOWS WITH EIS FOR PLOW SERIAL NUMBERS AFTER 9G100000, 9D100000, 9C100000 9TG100000, 9TD100000, 9TC100000 G10000, D100, C10000 00 Sno-Way International 910089H
More informationSeries T6W Welded Construction Hydraulic Cylinders
Series T6W Welded Construction Hydraulic Cylinders Description Series T6W hydraulic cylinders are available in Industrial and Marine specifications, they are of a heavy duty welded construction and are
More information1SV (e-sv) 60 Hz 3500 RPM
DIMENSIONS AND ENGINEERING PAGE 31 CONSTRUCTION: 34 STAINLESS STEEL NOMINAL FLOW: 9 GPM CAPACITIES: 2-12 GALLONS PER MINUTE HEADS: 13 372 PSI TDH STAGING: 2 3 MINIMUM FLOW: 2 GPM MAXIMUM WORKING 36 PSI
More informationCYLINDER PARTS LIST. R/S Series Cylinders, 1978 through July AB Series Cylinders, 1988 through AF Series Cylinders, 1990 through 1993
The purpose of this book is to provide general guidelines to cylinders and their replacement parts for machinery built between 1978 and the present. Approximate dates are intended to assist in pinpointing
More informationVIKING SG SERIES SINGLE PUMPS (WITH SHAFT SEAL)
SERIES SG-04, -05, -07, -10, -14 () Page 341.1.1 OPERATING RANGE: SERIES SG-04/-05 PUMP SG Pumps (, Lip or Mechanical Sealed) Displacements No. 29 Flow Range Pressure Range Temperature Range Viscosity
More informationWX980 Trailer Log Splitter Parts Manual
EMB Manufacturing Inc. Boomer Line St. Clements, On N0B M0 Canada Ph: (9) 99-983 Fax: (9) 99- www.embmfg.com WX980 Trailer Log Splitter Parts Manual S/N E9US0ES3809 & After 3809 & After Refer to the operators
More information542 Legend Loader Parts Pricebook
542 Legend Loader s Pricebook NEW PRICES EFFECTIVE NOVEMBER 1, 2013 Legend Loaders A Division of Sioux Steel Co., Inc. 200 North Cleveland; PO Box 409 Lennox, SD 57039 Telephone: (800) 855-534-3784 Fax:
More informationMiller JV Series. Medium Duty Hydraulic Cylinders. Up to 1000 PSI Bore Sizes 1" through 8" 18 Mounting Styles. Catalog M September, 2011
Medium Duty Hydraulic Cylinders Catalog M0- September, 0 Up to 000 PSI ore Sizes " through " Mounting Styles AV Series Cylinders Up to 0 PSI Permanently Lubricated AL Series Aluminum Cylinders Up to 0
More informationIndustrial Pumping Equipment PileDriver III Series III Air Motor Features
PileDriver III Series III Air Motor Features These fully pneumatic air motors reverse stroke direction without mechanical linkages and are simpler and more reliable than older designs. Air motors are 3,
More informationGrabTec. Farm Grapple OWNER S MANUAL. GF and GFD Models
Farm Grapple OWNER S MANUAL GF and GFD Models Grabtec Inc May 2014 Install Center/Shipping/Receiving: 1242 Arizona Ave Larchwood, IA 1241 (888) 87-892 (712) 477-267 PREFACE This manual describes the installation,
More information1SV (e-sv) 50 Hz 2900 RPM
DIMENSIONS AND ENGINEERING PAGE 37 CONSTRUCTION: 34 STAINLESS STEEL NOMINAL FLOW: 9 GPM CAPACITIES: 2-12 GALLONS PER MINUTE HEADS: 13 372 PSI TDH STAGING: 2 3 MINIMUM FLOW: 2 GPM MAXIMUM WORKING 36 PSI
More informationKMW PARTS PRICE LIST 1860 LOADER 2014 PART # PART DISCRIPTION LIST PRICE
PART # PART DISCRIPTION LIST PRICE 0595-3084 Decal Warning $5.28 0595-3001 Decal Warning $1.92 0595-3002 Decal Danger $2.28 0595-3003 Decal Warning $2.16 0595-3004 Decal Warning $2.04 0595-3088 Decal KMW
More informationKMW Parts List
08/ PART NUMBER DESCRIPTION LIST PRICE 0595-3084 Decal Warning $5.28 0595-3001 Decal Warning $1.92 0595-3002 Decal Danger $2.28 0595-3003 Decal Warning $2.16 0595-3004 Decal Warning $2.04 0595-3178 Decal
More informationWX960 Trailer Log Splitter Parts Manual. S/N & After
WX960 Trailer Log Splitter Parts Manual S/N 36000 & After Foreword EMB Mfg. has prepared this parts manual to assist customers in ordering quality OEM replacement parts. Proper and regular service and
More informationPARTS MANUAL BRON HSI PLOW
PARTS MANUAL BRON HSI PLOW RWF INDUSTRIES 873 Devonshire Ave., Woodstock, Ontario N4S 8Z4 Tel: (519) 421-0036 Toll Free: 1-800-263-1060 Fax: (519) 421-0028 Email: parts@rwfbron.com GENERIC JANUARY 2015
More informationHYDRAULICS VINCKE HYDRAULIC PUMPS
VINCKE HYDRAULIC PUMPS TECH-VHP200.1 index 3 link to your page / link a su página Gear pumps Introduction 3 Group 0 3 Group 1 3 Group 2 3 Group 3 4 6 7 12 18 Variable displacement pumps 21 Hand pumps 3
More information36EFC. Series & EFC Valve Package
Engineering & Manufacturing Solutions Specifications: Rated for 0-24 gpm (0-91 lpm) depending on Series 36-38 work sections used. Pressure rating 3000 psi (207 bar). 10 Micron filtration recommended. See
More informationBSM ROTARY GEAR PUMPS
FT. MTD. PUMP B-Series pumps are a good choice for a variety of recirculating, mixing, and transfer applications. Typical pumped liquids include solvents, resins, and petroleum products. These pumps are
More informationThe Lehigh Miracalube Air Cylinder The Only Real Self-Lube Air Cylinder in the World BENEFITS!
SERIES JHD HEAVY DUTY AIR CYLINDER The Lehigh Miracalube Air Cylinder The Only Real Self-Lube Air Cylinder in the World BENEFITS! The true test of a cylinder is how well it performs in your application.
More information6200 Series. Specifications. Fluid End Power End Models 6211, 6212, 6221, & 6222 Models 6241 & 6242 Part Material Part Material Part Material
5.2018.12.i 6200 Series Specifications The Flomore 6200 Series Pump line consists of a series of basic pump options all developed from a modular power unit. All units are pneumatically driven positive
More informationMOBILE HYDRAULICS WELDED & TIE ROD CYLINDERS
MOBILE HYDRAULICS WELDED & TIE ROD CYLINDERS Since 2001, PowerX International, LLC has been collaborating with its customers to design and supply hydraulic products and systems. Specializing in mobile
More informationSubsea and industrial hydraulic manufacturers
Cylinders C10 & Cepac Cylinders Operating Parameters Standard cylinders Working pressure External sea pressure - Cepac subsea cylinders Temperature range Hydraulic fluid Rod speed Rec filtration 250 bar
More informationPARTS BOOK PARTS BOOK CATALOG
PARTS BOOK PARTS BOOK CATALOG BOOM FLEXWING MOWER MOWERS HEADS ROTARY 15 CUT FLAIL DRAWBAR SAW HEAD MOUNT DITCHER DIAMOND MOWERS, LLC 350 E 60 th St. North Sioux Falls, SD 57104 FOR WARRANTY CALL DIAMOND
More informationPL-2 Series Medium-Duty Industrial Hydraulic Cylinders BPL-2 PH-2 PH-3 PHX
PL- Series Medium-Duty Industrial Hydraulic Cylinders PHX PH- PL- PH- Contents Features... Specifications / Mountings... Design Features and enefits... - Mounting Information, " to " ore Sizes... 8- Mounting
More informationMODEL I-900 SCRAPER INDEX
I-900 PARTS MANUAL Ashland Industries Inc. Hwy. 13 South P.O. Box 717 Ashland, WI. 54806 877-634-4622 Toll Free - phone 715-682-4622 phone 715-682-9717 fax www.ashlandind.com MODEL I-900 SCRAPER HOW TO
More informationFX140 & FX140R Skidding Winch Parts Manual
EMB Manufacturing Inc. 4144 Boomer Line St. Clements, On N0B 2M0 Canada Ph: (519) 699-9283 Fax: (519) 699-4146 www.wallensteinequipment.com FX140 & FX140R Skidding Winch Parts Manual S/N 514094 & After
More informationH35/40G(V) /7 Call Center. Engine Power Plant Sales Dep t Tel : 86)
http://www.soarpower.com http://www.soarpower.com H35/40G(V) Copyright 2014 Hyundai Heavey Industries Engine Power Plant Sales Dep t Tel : 86) 4006-690 588 E-mail : sale@soar.hk 24/7 Call Center 9 +8-4008111308
More informationSV SOLENOID OPERATED
Directional Control Valves SV Work Sections Type -T Solenoid Operated Type -S Solenoid and Manual Operation STANDARD FEATURES Open center or closed center applications Port relief options available Internal
More informationHydraulic Cylinders & Accessories Engineered for Excellence
FLUID POWER Hydraulic Cylinders & Accessories Engineered for Excellence (OPTIONAL PORT) WARNING LABEL H 68.42[2.69] N G (OPTIONAL PORT) N WARNING LABEL H TUBE IMPRINTING 63.6[2.503] 29.6[1.165] TUBE IMPRINTING
More informationThe friction free alternative
Rolling The Rolling Diaphragm Air Cylinder The advent of the long stroke rolling diaphragm as a means of low-friction dynamic sealing has led to the development of the ControlAir Diaphragm Air Cylinder.
More informationWX370 Tractor Mount Splitter Parts Manual S/N to S/N
WX370 Tractor Mount Splitter Parts Manual S/N 3709 to S/N 37033 Foreword EMB Mfg. has prepared this parts manual to assist customers in ordering quality OEM replacement parts. Proper and regular service
More informationHYDRAULIC HEAVY DUTY
Catalog #HHD-16 12/16 HYDRAULIC HEAVY DUTY Series HHD 3000 PSI RATED 10-25-16 WARNING IMPROPER SELECTION, IMPROPER USE OR FAILURE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN CAN CAUSE PROPERTY DAMAGE,
More informationDeltaBase 102 Technical Data Sheet
Release Date: Sept 16th 2008 Page 1 of 6 PRODUCT OVERVIEW The DeltaBase 102 Anchor drill rig for double-head drilling systems, rotary / percussion operations is specially designed for the following key
More informationFluid Power. M3000/S3000/SMD Series Cylinders. M3000 S3000 SMD (Special Medium Duty) Medium Duty Cylinders for a Wide Range of Applications
Fluid Power M3000/S3000/SMD Series Cylinders Medium Duty Cylinders for a Wide Range of Applications M3000 S3000 SMD (Special Medium Duty) EFPA/210/1203/B Contents M3000 and S3000 Series General Description
More informationPARTSBOOK. Hall Manufacturing, Inc E. Washington Ave., P.O. Box Drawer 5638 North Little Rock, AR (501)
540 RPM 2 PARTSBOOK This part of the manual contains part numbers and illustrations based on the latest information available at the time of print. Hall Manufacturing, Inc. reserves the right to make changes
More informationV75-II PLOW PARTS MANUAL
PLOW RWF INDUSTRIES 873 Devonshire Ave., Woodstock, Ontario N4S 8Z4 Tel: (519) 421-0036 Toll Free: 1-800-263-1060 Fax: (519) 421-0028 Email: rwf@wwdc.com GENERIC JANUARY 2015 The information contained
More informationEFC. Electronically Adjustable Proportional Pressure Compensated Flow Control
Engineering & Manufacturing Solutions Specifications: See flow chart for capacity. 3000 psi (207 bar) rating. Weighs 8-1/2 lbs. (3.9 kg). Standard Port size #12SAE (1-1/16 12). 10-Micron Filtration Recommended.
More informationDoosan Infracore DX225LL TECHNICAL DATA
Doosan Infracore Construction Equipment DX225LL TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Doosan DL06 NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 155 / 1,900 (hp PER SAE J1995)
More informationLoader Backhoe Front Axle Parts 2WD & 4WD
Loader Backhoe Front Axle Parts 2WD & 4WD SECTION G LOADER BACKHOE FRONT AXLE PARTS CASE 2WD AXLE PARTS G2 - G5 CARRARO APPLICATIONS G6 - G25 FRONT AXLE KITS G23 - G25 CASE POWER STEERING VALVES & PUMPS
More informationSeals On Demand engineered, machined, delivered.
SEALS ON EMAN Seals On emand engineered, machined, delivered. Hercules Seals On emand offers you a wide selection of custom, cost-effective sealing solutions, using advanced rapid-prototype technology.
More informationModel DFLP Linear Actuator
Features Rugged Long Lasting Construction Dyna-Flo s expert CNC machining process and superior quality parts come together to make DFLP actuators a rugged, long lasting product. DFLP actuators are manufactured
More informationClippard offers more types of miniature pneumatic cylinders for the MINIMATIC CYLINDER
MINIMATIC CYLINDER Clippard offers more types of miniature pneumatic cylinders for the designer s convenience, including: spring return, spring extend, air retract, double-acting and double rod models.
More informationRL-F60 PARTS LIST # I USE THIS PARTS LIST FOR: Hoist Serial Number 6745 to
RL-F60 PARTS LIST # 102692I USE THIS PARTS LIST FOR: Hoist Serial Number 6745 to For older hoists use the following: Parts List No. 102692H for Serial Number 2640 to 6744 IF YOUR HOIST DOES NOT FALL WITHIN
More informationMODEL EF Full Circle Tire Spreader
MODEL EF Full Circle Tire Spreader Installation, Operation & Repair Parts Information Branick Industries, Inc. 4245 Main Avenue P.O. Box 1937 Fargo, North Dakota 58103 REV. 062917 P/N: 81-0050C CAUTION
More informationProduct Range IDEX CORPORATION
Product Range IDEX CORPORATION Viking Pump provides an unmatched combination of application expertise and positive displacement pumping products to meet your pumping needs. We specialize in the design,
More information534E WHEEL LOADER. Bucket Capacity 2.6 m 3 to 5.7 m 3 (3.4 yd 3 to 7.5 yd 3 ) Net Horsepower 169 kw (227 hp) Operating Weight kg (45,917 lb)
534E WHEEL LOADER Net Horsepower 169 kw (227 hp) Capacity 2.6 m 3 to 5.7 m 3 (3.4 yd 3 to 7.5 yd 3 ) Operating Weight 20828 kg (45,917 lb) The best in the business for productivi features and a wide choice
More informationAssembly & Installation Instructions
TM P R O D U C T S Assembly & Installation Instructions FOR 28 SERIES SNOWPLOW PIVOT ASSEMBLY AND FLOAT LIMITER 99103000 FOR SERIAL NUMBERS 28D100000 TO 28D100770 97100552A 1. THINK SAFETY, ALWAYS WEAR
More informationDISCLAIMER. COPYRIGHT 2010 by ATI Corporation 250 Earland Drive New Holland, PA U.S.A.
COPYRIGHT 2010 by 250 Earland Drive U.S.A. DISCLAIMER THE INFORMATION IN THIS MANUAL IS PROVIDED TO PROMOTE THE SAFE USE OF, AND ASSIST THE OPERATOR IN ACHIEVING THE BEST PERFORMANCE FROM, PARA-LEVEL GRADING
More informationHYDRAULICS VINCKE DIRECTIONAL CONTROL VALVES
VINCKE DIRECTIONAL CONTROL VALVES TECH-DCV200.1 index 3 link to your page / link a su página Monoblock hydraulic distributors Monoblock hydraulic distributors 35 liters 3 P35 Monoblock hydraulic directional
More information26HVGC-L Trailer Log Splitter Parts Manual
EMB Manufacturing Inc. Boomer Line St. Clements, On N0B M0 Canada Ph: (9) 99-983 Fax: (9) 99- www.embmfg.com HVGC-L Trailer Log Splitter Parts Manual S/N E9US39S0839 & After PRINTED IN CANADA Rev: E.0
More informationPARTSBOOK. This part of the manual contains part numbers and illustrations based on the latest information available at the time of print.
2 PARTSBOOK This part of the manual contains part numbers and illustrations based on the latest information available at the time of print. Hall Manufacturing, Inc. reserves the right to make changes at
More informationWX520 Trailer Log Splitter Parts Manual
EMB Manufacturing Inc. Boomer Line St. Clements, On N0B 2M0 Canada Ph: (59) 99-9283 Fax: (59) 99- www.embmfg.com WX520 Trailer Log Splitter Parts Manual S/N 2E9USES250328 & After 250328 & After Refer to
More informationENERPAC HYDRAULIC PRODUCTS
ENERPAC Enerpac features the most comprehensive family of high-force products, distributed globally yet supported locally, to make you more productive and the work you do safer and easier to perform. Decades
More informationLubricant and Coolant Capacity
Engine Isuzu AI-4HK1X Tier 3 turbocharged diesel engine with electronic fuel control, 153 Net HP (114 kw), 5.2 Liter displacement, 4-cylinder, water-cooled, EGR with cooler, air-toair intercooler, 24-volt
More information