DMR STYLE MPSB STYLE MPSA-58 STYLE MPSA.
|
|
- Vanessa Richards
- 6 years ago
- Views:
Transcription
1 STYLE MPSB Double-acting three piece piston seal. 70 Durometer Nitrile with fabric reinforced Nitrile and Nylon guide rings. The sealing action is effected by the fabric reinforced Nitrile member at the dynamic side. Lubricants such as oil and grease are able to penetrate the fabric and allow the seal to be highly wear resistant. Can easily be to one piece pistons. STYLE MPSA-59 Double-acting three piece piston seal. 70 Durometer Nitrile with fabric reinforced Nitrile and Nylon guide rings. Consists of a solid rubber element that is reinforced with fabric on both sides. This gives the seal excellent resistance to pressure surges. STYLE MPSA-58 Double-acting three piece piston seal. 70 Durometer Nitrile with fabric reinforced Nitrile and Nylon guide rings. Heavy duty seal for multi-piece pistons. The robust profile and the sturdy right angle of the back-up/support rings give the seal high resistance to peak pressures and pressure surges. Rated to 7500 psi. STYLE MPSA Double-acting five piece piston seal. 70 Durometer Nitrile with Hytrel back-up rings and Nylon guide rings. The hardness of the materials used in the construction of each component of the seal increases from the inside component to the outside component. As a result, the performance of each individual component is optimized in performing the individual functions of sealing, bridging the gap, and guidance within the cylinder tube
2 STYLE PSA-58 Style PSA-58 piston seals combine a heavy duty, fabric reinforced seal with two polyacetal L bearings. This construction allows the seal to withstand pressures up to 5,000 PSI. L bearings also react to pressure to prevent extrusion and support the piston. For 2-piece pistons. STYLE PSA-59 This style is designed for 2 piece piston. The seal is a molded Nitrile rubber element with bonded rubberized fabric reinforcement and two anti-extrusion polyacetal bearings. STYLE PSA-65 Compact and easy to install, the Style PSA-65 piston seal is a simple and economical design for pressures up to 3,000 PSI. The assembly consists of a nitrile rubber seal and two polyacetal bearings to support the piston. For 1-piece pistons. STYLE PSA Designed to fit on one or two piece pistons, this piston seal employs a nitrile seal for high sealability, nylon split back-ups for extrusion resistance, and two split bearing rings. No further support bearings required
3 Style MPSB MPSB-032B MPSB MPSB MPSB-050A MPSB-060B MPSB MPSB MPSB-090B MPSB-100F MPSB-110B MPSB-120B MPSB-125F MPSB MPSB MPSB Style MPSA-59 MPSA MPSA MPSA MPSA MPSA MPSA MPSA MPSA MPSA A MPSA MPSA MPSA MPSA A MPSA MPSA MPSA MPSA
4 Style MPSA-58 MPSA MPSA A MPSA MPSA B MPSA MPSA A MPSA A MPSA MPSA MPSA MPSA A MPSA C MPSA B MPSA Style MPSA MPSA MPSA MPSA MPSA- 025A MPSA- 025B MPSA MPSA- 030A MPSA MPSA- 032A MPSA- 032C MPSA- 032D MPSA MPSA- 035A MPSA- 040D MPSA- 040E MPSA- 040F MPSA- 040G MPSA MPSA- 045A MPSA- 045B MPSA MPSA- 050A MPSA- 050B MPSA- 050D MPSA MPSA- 055B MPSA MPSA- 060B MPSA- 060C MPSA MPSA- 063A MPSA- 063B MPSA- 063E
5 Style MPSA MPSA MPSA- 065A MPSA MPSA- 070A MPSA- 070B MPSA MPSA- 075A MPSA MPSA- 080A MPSA- 080C MPSA- 080D MPSA MPSA MPSA- 090B MPSA- 090C MPSA MPSA MPSA MPSA- 100A MPSA- 100B MPSA- 100E MPSA- 100F MPSA MPSA- 105A MPSA MPSA- 110A MPSA- 110B MPSA- 110D MPSA MPSA- 115B MPSA MPSA- 120B MPSA MPSA- 125A MPSA- 125E MPSA- 125F MPSA MPSA MPSA MPSA- 140A MPSA- 140B MPSA- 140C MPSA- 140E MPSA- 140F MPSA MPSA- 150A MPSA- 150D MPSA MPSA- 160A MPSA- 160B MPSA MPSA- 170A MPSA- 175B MPSA MPSA- 180A MPSA MPSA MPSA- 200B MPSA- 220A
6 Style PSA-58 A Bore D Seal / D1 Bearing +0/ E Seal E1 Bearing F Piston PSA PSA PSA PSA PSA PSA PSA PSA PSA B PSA PSA PSA PSA A PSA PSA PSA PSA A PSA B
7 Style PSA-58 A Bore D Seal / D1 Bearing +0/ E Seal E1 Bearing F Piston PSA PSA PSA PSA PSA PSA PSA PSA PSA PSA PSA PSA PSA A PSA PSA PSA PSA
8 Style PSA-59 A Bore D Seal / D1 Bearing +0/ E Seal E1 Bearing F Piston PSA A / ± / ±0.003 PSA / ± / ±0.003 PSA / ± / ±0.003 PSA / ± / ±0.003 PSA / ± / ±0.004 PSA / ± / ±0.004 PSA / ± / ±0.004 PSA A / ± / ±0.004 PSA / ± / ±0.004 PSA A / ± / ±0.004 PSA / ± / ±0.004 PSA A / ± / ±0.004 PSA / ± / ±0.004 PSA / ± / ±0.004 PSA / ± / ±0.004 PSA / ± / ±0.005 PSA / ± / ±0.005 PSA / ± / ±0.005 PSA / ± / ±0.005 PSA / ± / ±0.005 PSA / ± / ±0.005 PSA / ± / ±
9 Style PSA-65 A Bore D Seal / D1 Bearing +0/ E Seal E1 Bearing F Piston PSA / / / / PSA / / / / PSA / / / / PSA / / / / PSA / / / / PSA / / / / PSA / / / / PSA / / / / PSA A / / / / PSA / / / / PSA / / / / PSA / / / / PSA / / / / PSA / / / / PSA / / / / PSA / / / / PSA / / / /
10 Style PSA A Bore D Seal / D1 Bearing +0/ E Seal E1 Bearing F Piston PSA / ± / ±0.003 PSA / ± / ±0.004 PSA / ± / ±0.004 PSA / ± / ±0.004 PSA / ± / ±0.004 PSA / ± / ±0.004 PSA / ± / ±0.004 PSA / ± / ±0.004 PSA-3250A / ± / ±0.004 PSA / ± / ±0.004 PSA-3500A / ± / ±0.004 PSA / ± / ±0.004 PSA / ± / ±0.004 PSA-4000A / ± / ±0.004 PSA-4000B / ± / ±0.004 PSA / ± / ±0.005 PSA-4500A / ± / ±0.005 PSA / ± / ±0.005 PSA-5000A / ± / ±0.005 PSA / ± / ±0.005 PSA-6000A / ± / ±
1501 KUEBEL ST. HARAHAN, LA 70123
style ps1400 glass filled ptfe piston seals The PS1400 seals offer low friction and high strength in a compact double-acting piston seal design. The PTFE seal ring, combined with a rubber energizer, assures
More informationList Price. Part Number
162 style tp piston T-Seals combine a resilient sealing ring with a hard, split back-up ring on each side of the sealing element. The assembly installs in a standard o-ring groove. T-Seals are non-spiraling
More informationCompact Seal. DUOPAC rubber fabric reinforced compact seals Type DPS and DPC. Busak+ Shamban
DUOPAC rubber fabric reinforced compact seals Type DPS and DPC Description The compact seals DUOPAC DPS and DPC types are double acting piston seals with integrated guide rings. DUOPAC has been designed
More informationCylinders. Series TQ Agricultural Cylinders. Vickers. Nominal Pressure: 2500 psi
Vickers Cylinders Series TQ Agricultural Cylinders Nominal Pressure: 500 psi Released 10 91 113A Series TQ Hydraulic Cylinders Designed for Agricultural Applications Features Working pressure to 500 psi
More informationmmetric Master Seals Catalogue 05/06
mmetric NR Master Seals Catalogue NR Contents Metric Seals Seal Index Piston Double Acting 01 Piston Seals 02 Glide Rings 03 Piston Rings 04 Pneumatic Piston and Seal Piston Single Acting 05 Piston Seals
More informationUPN. Rod and piston seal with energizing element UPN
Rod and piston seal with energizing element MATERIAL 1 1 Type Polyurethane Designation SEALPUR 93 Hardness 93 ShA 2 2 Type Nitril Rubber NBR Designation RUBSEAL 70 Hardness 70 ShA Pressure 400 bar FIELD
More informationDescription Product group Rod seal
Description Product group Rod seal Design N symmetrical u-ring (05) NI asymmetrical u-ring with inner main sealing lip (07) Profile no. 05/07 Specification E suitable for onesided pressure load Model STI
More informationPOLYPAC - Selemaster SM. Single Acting Compact Rod Seal With Anti-extrusion Ring Material: Rubber + Fabric Reinforced Rubber + POM
Single Acting Compact Rod Seal With Anti-extrusion Ring Material: Rubber + Fabric Reinforced Rubber + POM 85 86 Selemaster SM The rod seal range has been designed to meet the needs of hydraulic equipments
More informationHard nylon back-up rings for use with U-seals. I.D. C.S. Part. Part Number. Part. Part TEMPERATURE. -65 to +220 f PRESSURE
236 style mbn u-seal back-up rings ard nylon back-up rings for use with U-seals. nylon C.S. W -65 to +220 f 0 to 5,000 psi (Prefix) - (ID) X (CS) X (W) Back-up rings MBN-75X2.5X2.5 MBN-28X3.7X1.5 MBN-40X4X1.4
More informationG max rad Ød 2 Ød 3 ØD to to to to
Design Hallite 506 bearing strip is available in three forms: cut rings, spiral lengths and flat coils. Hallite 506 provides an extremely effective, hard wearing and easy to use bearing material. Manufactured
More informationExclusive distributor of. guide rings and bushes. issue one. issue one
issue one issue one Exclusive distributor of guide rings and bushes by p: 0800 822 722 www.pacificseals.co.nz e: info@pacificseals.co.nz bout Pacific Seals Pacific Seals is New Zealand s premier seal distributor
More informationDesign. Dynamic Sealing Face Ød1,ØD max Static Sealing Face Ød2,ØD2, L1 3.2 max 16 max 125 max 140 max
Design Hallite 506 bearing strip is available in three forms: cut rings, spiral lengths and flat coils. Hallite 506 provides an extremely effective, hard wearing and easy to use bearing material. Manufactured
More informationSERIES: VLS. INTERCHANGE: With similar couplings MAIN APPLICATIONS. Mobile construction equipment Drilling rigs Vehicle/Trailer Industrial plant
INTERCHANGE: With similar couplings MAIN APPLICATIONS Mobile construction equipment Drilling rigs Vehicle/Trailer Industrial plant VLS series is the screw to connect coupling with poppet style valving,
More informationNTB Series Nut Assembies. Anti-Backlash Life. Without Kerkote TFE Coating inch / (cm) 100 to 125 million (250 to 315 million) With Kerkote TFE
Screw and Nut Assemblies NTB Nut Series For higher load applications. The NTB Series anti-backlash assembly is designed for higher load applications than the ZBX or KHD series units. Using the specially
More informationClaronPolyseal Single Acting Rod Seal PVM & PV
M & Metric tyle and M is a acting rod or piston seal for medium to heavy duty applications. The assembly consists of a male and female header and a series of 'V'. The number of 'V' may be varied to alter
More informationVERLON No Swell Wear Rings
VERLON No Swell Wear Rings Ultra precision +.001 tolerance on cross section NO SWELL - Lowest friction Strength to 40,000 PSI Large range of widths, cross sections and diameters - metric too Features &
More informationP54 PISTON SEAL TECHNICAL DETAILS. Part Number Structure. Double-Acting F E A T U R E S P54 M R N HLX. Compact piston design.
PISTON SEAL Double-Acting TECHNICAL DETAILS The Hallite P54 is a double-acting, o-ring energized, low-friction piston seal that performs well in both high- and low-pressure systems. High-performance Armorlene
More informationBEARING Polyester Fabric, Rod and Piston and Coil
ØD ØD 3 Ød 1 Ød Ød 3 ØD 1 506 BEARIN Polyester Fabric, Rod and Piston and Coil DEIN The Hallite 506 bearing strip is designed to provide an extremely effective, hard wearing, and easy-to-use bearing solution
More informationParallel Grippers. Body One piece anodized aluminum body
Catalog 19-2/US Features Rack and Pinion Rack and pinion drive mechanism provides synchronous motion. Body One piece anodized aluminum body Bushings Four composite bushings provide the support needed for
More informationM/46800/M, M/46800/HM, M/46800/PM
External guides for heavy loads over long distances Rigid, reinforced aluminium profile provides greater load support T-slots in the outer profile enable individual mounting options Precision guidance
More informationCASING SPACERS DESIGNED FOR WATER, SEWER, OIL & GAS
CASING SPACERS DESIGNED FOR WATER TER,, SEWER,, OIL & GAS The BWM Company P.O. Box 1 Forest City, North Carolina 2803 Phone: 828.27.030 Toll Free 8 5 SPACER Fax: 828.25.59 www.bwmcompany.com BWM will provide
More informationHydraulic seals. A wide range for hydraulic cylinders in off-highway applications. The Power of Knowledge Engineering
Hydraulic seals A wide range for hydraulic cylinders in off-highway applications The Power of Knowledge Engineering Optimizing hydraulic cylinder sealing system performance See what you can achieve with
More informationAnti-Backlash Life. Without Kerkote TFE Coating inch / (cm) 5 to 10 million (12 to 25 million) With Kerkote TFE
Lead Screw and Nut ssemblies NTG Nut Series ompact size, zero backlash, minimal drag torque. The adjustable NTG Series offers a cost effective anti-backlash assembly for applications requiring precise
More informationCSM Crown T.M. Seal MACROTECH POLYSEAL, INC. 1/97 PATENT NO. 4,190,259
CSM-1000 Crown T.M. Seal MACROTECH POLYSEAL, INC. PATENT NO. 4,190,259 1/97 Crown Seal DESCRIPTION The Crown Seal is a squeeze-type seal. An O-ring is used as a loading spring and to seal the static surface.
More informationALTITUDE CONTROL VALVES FOR ONE WAY FLOW
PROJECT NAME LOCATION ALTITUDE CONTROL VALVES FOR ONE WAY FLOW INTRODUCTION This specification covers the design, manufacture, and testing of 2 in. (50 mm) through 36 in. (900 mm) Control Valves PART 1
More informationPRESSURE RELIEF / SUSTAINING CONTROL VALVES
PROJECT NAME LOCATION PRESSURE RELIEF / SUSTAINING CONTROL VALVES INTRODUCTION This specification covers the design, manufacture, and testing of 1 in. (25 mm) through 36 in. (900 mm) Control Valves PART
More informationPolon Piston sealing set
The double-acting piston sealing set profile consists of a PTFE piston sealing ring and an elastomer O-Ring as a preloading element. Profile is particularly suitable for double-acting pistons in control
More informationSERIES PA SWING ARM CLAMPS for the Automotive Industry
Pa SERIES PA SWING ARM CLAMPS for the Automotive Industry Ideal for a wide variety of automated part holding and transfer applications Copper Arm Switches Installed ORDERING DATA: SERIES PA CLAMPS INDEX:
More informationPRESSURE RELIEF / SURGE ANTICIPATOR CONTROL VALVE
PROJECT NAME LOCATION PRESSURE RELIEF / SURGE ANTICIPATOR CONTROL VALVE INTRODUCTION This specification covers the design, manufacture, and testing of 2-1/2 in. (65 mm) through 18 in. (450 mm) Control
More informationWear Rings / Bearings
Wear Rings / Bearings Contents Product Offering... -3 Engineering... -4 Materials... -6 Wear Rings / Bearings Profiles WPT... -8 WRT... -12 PT... -16 PW... -20 Wear Rings / Bearings Parker offers a complete
More informationFreezeFree TM Nitro Anti-Icing System GENERAL SPECIFICATIONS
I. GENERAL FreezeFree TM Nitro Anti-Icing System GENERAL SPECIFICATIONS The FreezeFree Nitro Anti-Icing System shall be designed and manufactured by Energy Absorption Systems, Inc., of Chicago, Illinois.
More informationSeries SIT Hydraulic Cylinders Single acting Internal Thread
ax: (604) 5-0070 Toll ree 1-800-98-1170 Series SIT Hydraulic Cylinders Single acting Internal Thread Pressure:,500 psi Working 3,500 psi Non-Shock Bore Sizes: 1.5 to 3.5 Rod Sizes: to 3.00 Ports: Attachments:
More informationHigh pressure washpipe assembly with integral reservoir. Revision 1 October 10, 2017
Kalsi Seals Handbook Chapter E6 High pressure washpipe assembly with integral reservoir Revision 1 October 10, 2017 Individual chapters of the Kalsi Seals Handbook are periodically updated. To determine
More information1501 KUEBEL ST. HARAHAN, LA 70123
style tr rod t-seals T-Seals combine a resilient sealing ring with a hard, split back-up ring on each side of the sealing element. The assembly installs in a standard o-ring groove. T-Seals are non-spiraling
More informationPiston Seals Wipers O-Rings & Kits Custom Parts Specialty Parts Services Wear Guides Rod Seals UL Compounds QUALITY VALUE SERVICE.
Piston Seals Wipers O-Rings & Kits Custom Parts Specialty Parts Services Wear Guides Rod Seals UL Compounds QUALITY VALUE SERVICE UL Compounds RT DYGERT S UL LINEUP Certifiably perfect solutions. RT Dygert
More informationMiscellaneous Products
Category Seals................................................................................. 1332 Felsted Control Cables................................................................... 1361 Salami
More informationPolyseal Total Sealing Technology
ontents ompany Profile Product Range Index Product Range Section / Piston Seals Section B S/ Piston Seals Section Rod Seals Section Rod Wipers Section E Bearing rings Section F ORings & Backup Rings Other
More informationMicroSpan. Chain. Chain. revised SpanTech LLC
Chain MicroSpan Chain 1 27 SpanTech LLC Contents Overview... 3 MicroSpan Chain Types... 3 The Nose Bar... 6 Chain Fabrication... 8 Chain Widths... 8 MicroSpan Sprockets... 9 Standard Split Sprocket...
More informationDMRTM. SHAFT SEALS
TM www.daemar.com SHAFT SEALS For over 30 years Daemar Inc. has remained focused on partnering with our customers to deliver fluid sealing solutions that meet their business challenges. Whether the application
More informationMiscellaneous Products
Category Seals................................................................................. 1318 Felsted Control Cables................................................................... 1350 Thread
More informationThe Right Seal for Every Application
The Right Seal for Every Application O-Rings The O-ring s simple & inexpensive design remains a popular and universal choice for sealing static and dynamic hydraulic systems. It seals efficiently in both
More informationTranseals Pty Ltd. Phone 61 (8) Fax 61 (8) Web
Phone 61 (8) 9451 6011 Fax 61 (8) 9458 5766 Web http://www.transeals.com.au Email seals@transeals.com.au ABN 29 008 902 163 1 Atlas Court, Welshpool, Western Australia, 6106 PO Box 15, Welshpool, Western
More informationLink-Belt ES Series Idler Rolls
Link-Belt ES Series Idler Rolls Introducing the ES Series Idler Rolls from Syntron Material Handling, specifically designed for extreme service in the harsh environment of oil sands extraction. Link-Belt
More informationD and DL Annular Blowout Preventers
D and DL Annular Blowout Preventers In the unique design of the Cameron DL Annular BOP, closing pressure forces the operating piston and pusher plate upward to displace the solid elastomer donut and force
More informationUltra-Matic Air Valve System
Ultra-Matic Air Valve System Efficient Pumps, Competitive Upgrades and Accessories U2 Plastic Pumps Metallic Pumps Specialty Pumps Upgrade Kits Accessories Diaphragms Ultra-Matic Air Valve Technology Simple.
More informationTie Rod & Welded Cylinders. Buyers. Guide Fluid Power Products
Tie Rod & Welded Cylinders Buyers Guide Fluid Power Products Providing value engineered hydraulic solutions for todays demanding needs Table of Contents 30 Month Warranty...............................................
More informationPRESSURE REDUCING VALVE
Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING VALVE with LOW-FLOW BY-PASS FEATURE Main Line valve
More informationPRESSURE REDUCING VALVE
Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING VALVE with LOW-FLOW BY-PASS FEATURE Main Line valve
More informationPRESSURE REDUCING CONTROL VALVES
PROJECT NAME LOCATION PRESSURE REDUCING CONTROL VALVES INTRODUCTION This specification covers the design, manufacture, and testing of 1 in. (25 mm) through 36 in. (900 mm) Control Valves PART 1 - GENERAL
More informationMODULATING FLOAT CONTROL VALVE
PROJECT NAME LOCATION MODULATING FLOAT CONTROL VALVE INTRODUCTION This specification covers the design, manufacture, and testing of 2 in. (50 mm) through 36 in. (900 mm) Control Valves PART 1 - GENERAL
More informationThermoplastic Hose Quick Reference Guide
Thermoplastic Hose Quick Reference Guide 4703 4700 SAE 100R3 SAE 100R7 Low Pressure Hydraulics High Pressure Pneumatics Hand Tools Lubrication System Pilot Lines and Joystick Controls General Hydraulics
More informationFLOAT CONTROL VALVES
PROJECT NAME LOCATION FLOAT CONTROL VALVES INTRODUCTION This specification covers the design, manufacture, and testing of 8 in. (200 mm) through 36 in. (900 mm) Control Valves PART 1 - GENERAL 1. Standard
More informationno adhesion effect on sliding surface, even after a long standstill superior performance over a wide range of temperatures and hydraulic fluids
Industrial Seal Inc. offers a wide range of hydraulic and pneumatic Piston seal profiles to meet the broad demands of the fluid power industry. These Piston seals are offered in a variety of compounds
More information22000 MOUNT SERIES. Features. Benefits. Load Range. Low-profile, high capacity mounts for vibration and shock protection.
2 MOUNT SERIES Low-profile, high capacity mounts for vibration and shock protection. Features Fail-safe when used with snubbing washer Axial to radial stiffness of 1:1 Low natural frequency Sturdy, reliable
More informationReliable sealing solutions create value
Reliable sealing solutions create value Reduced leakage, reduced friction and an improved service lifetime. SKF s double acting piston seals are maintenance-free and deliver top MPV, DPV, LPV, CPV seals
More informationRB NOK Asymmetrical Profile Rod U-Cup with Double Lip RB asymmetrical C-cup is suited for heavy
RB NOK Asymmetrical Profile Rod U-Cup with Double Lip RB asymmetrical C-cup is suited for heavy duty mobile and stationary service when rod leakage must be kept to a minimum. Double lip design reduces
More information3"-42" FLANGE-TYTE II TM FULL FACE GASKET FOR FLANGED JOINTS 2016 EDITION FOR WATER & WASTEWATER, FIRE PROTECTION & INDUSTRIAL APPLICATIONS
TM FOR FLANGED JOINTS 3"-42" Certified to ANSI/NSF 61 FOR WATER & WASTEWATER, FIRE PROTECTION & INDUSTRIAL APPLICATIONS Table of Contents FULL FACE TM Gasket Introduction 3 Pressure Performance 3 Torque
More informationindustrial seals catalog
industrial seals catalog COMPLETE S EAL S OLUTIONS FROM A S INGLE S OURCE C E L E B R A T I N G S S U P 1976-2016 I O N E R I O R S E A L S O T L U Established in 1976, HydraPak is built on a commitment
More informationOperating and Maintenance Instructions for: Figure 79 Pneumatic Actuators (U/E options)
for: Figure 79 Pneumatic Actuators (U/E options) Introduction The Keystone Figure 79 Pneumatic Actuator range is available in three mounting options, as follows:- 79U - Keystone Mounting Standard 79E -
More informationCUPSEALS SUPPLIED BY ORINOCO BEARINGS, LEEDS UK
RUBBER CUPSEALS CUPSEALS NOTE: The cups are center punched if there is no hole size indicated. CUPSEAL INFORMATION BUNA-N RUBBER -40 TO +220 F 0 TO 150 PSI (Piston Cup Type)() - () Lip Ht. 6062 5/8 0.305
More informationSCRAPERS. Busak+ Shamban
SCRAPERS 1 2 Scrapers Contents Choice of Scraper Element... 4 Turcon R Excluder R 2... 7 Turcon R Excluder R 5... 15 Turcon R Excluder R 500... 23 Scraper DA17... 29 Scraper DA22 and RSW... 35 Scraper
More informationSOLENOID CONTROL VALVE
PROJECT NAME LOCATION SOLENOID CONTROL VALVE INTRODUCTION This specification covers the design, manufacture, and testing of 4 in. (100 mm) through 36 in. (900 mm) Control Valves PART 1 - GENERAL 1. Standard
More information550 Series Back Pressure, Low Pressure Valve
Application: The are used on any installation where the pressure upstream must be kept in a preset range. These valves can be used as a pressure relief valve, custody transfer dump valve to hold a certain
More informationTOMORROW S SOLUTIONS HANDLED TODAY
MATERIAL HANDLING TOMORROW S SOLUTIONS HANDLED TODAY Delivering dependable and efficient material handling products will become more important than ever as companies seek to gain a competitive edge in
More informationKITS & TOOLS. regular discounts may not be given on every ITem in this section. kits & tools contents KITS & TOOLS
Contents 383 page O-Ring Assortment Kits 384-394 O-Ring Splice Kits 395 Back-Up Ring Assortment Kits 396-397 Rubber U-Cup Assortment Kit 397 Retainer Ring Assortment Kits 398-399 Cap Plug Assortment Kit
More informationDA/SR. Pneumatic Rotary Actuators FEATURES VALBIA ISO 9001 CERTIFIED
VALBIA ISO 9001 CERTIFIED FEATURES Twin Rack and Pinion Design Constant Torque Output Compact Design Balanced Internal Forces Robust Design For Long Life Extruded Aluminum Body Hard Coat Anodized Smooth
More informationKEYSTONE FIGURE 79 PNEUMATIC ACTUATOR OPERATING AND MAINTENANCE INSTRUCTIONS
Operating and Maintenance Instructions for: Figure 79 Pneumatic Actuators (U/E options) Double Acting Actuator 4. If pipelines are hydraulically tested, then the lines should be blown down with high pressure
More informationPermapak Seal Bore Packer
Quality We Know Downhole. Permapak Seal Bore Packer The D&L Permapak Seal Bore Packer can be used for single or multiple zone completions. It is designed for wells where high pressure/temperatures and
More informationSeals On Demand engineered, machined, delivered.
SEALS ON EMAN Seals On emand engineered, machined, delivered. Hercules Seals On emand offers you a wide selection of custom, cost-effective sealing solutions, using advanced rapid-prototype technology.
More informationStop-Tail-Turn Lights
Stop-Tail-Turn Lights Innotec s 4 Round Stop-Tail-Turn LED Lights will outperform its competitors through the unknown challenges on the road with unequalled durability and impact resistance. The use of
More informationCOMBINATION PRESSURE REDUCING AND SOLENOID SHUTOFF CONTROL VALVES 2.01 COMBINATION RESSURE REDUCING AND SOLENOID SHUTOFF CONTROL VALVE
PROJECT NAME LOCATION COMBINATION PRESSURE REDUCING AND SOLENOID SHUTOFF CONTROL VALVES INTRODUCTION This specification covers the design, manufacture, and testing of 1 in. (25 mm) through 36 in. (900
More informationAmerica rolls on Kendale quality made in the U.S.A.
America rolls on Kendale quality made in the U.S.A. Kendale Industries, Inc. Auburn, Alabama Kendale Industries is a leading producer of semi-precision ball bearings and wheels for powered and gravity-type
More informationKits & Tools ASSORTMENT KITS AND TOOLS
295 Contents Kits & Tools Page O-Ring Assortment Kits 296-305 O-Ring Splice Kits 306 Back-Up Ring Assortment Kits 307 Rubber U-Cup Assortment Kit 308 Retainer Ring Assortment Kits 309-310 Cap Plug Assortment
More informationUNLEASH THE POWER REAL-WORLD SOLUTIONS
FLUID POWER UNLEASH THE POWER The fluid power industry is not only solidifying a hold on current applications, it is unleashing its knowledge into everincreasing frontiers. Excessive temperature and diverse
More informationPG Series 180º Rotation Pneumatic Actuators
PDF Published April 18, 2016 PG Series 180º Rotation Pneumatic Actuators for Chemline 3-way ball valves up to 4 material: Epoxy and Rilsan coated aluminum SERIES: PGS Spring Return PGD Double Acting control
More informationROMAC INDUSTRIES, INC. WIDE RANGE RESTRAINT. RESTRAINED END CAP page 6-7 NOW AVAILABLE FOR HDPE PIPE NO STIFFENER REQUIRED
ROMAC INDUSTRIES, INC. WIDE RANGE RESTRAINT RESTRAINED COUPLING page 4-5 RESTRAINED END CAP page 6-7 RESTRAINED FLANGED COUPLING coming soon JUNE 2014 UPDATE NOW AVAILABLE FOR HDPE PIPE NO STIFFENER REQUIRED
More informationLOAD MEASURING EQUIPMENT DATA SHEETS
LOAD MEASURING EQUIPMENT DATA SHEETS www.rriuk.com red rooster TENSILE LINK SELF INDICATING (Type: SWL) Manufactured in a range of capacities from 2 tonnes to 25 tonnes utilising high strength, low weight
More informationCasing Spacers. ApogeeAero Roller Sizes. Roller Casing Spacers. Manufactured Exclusively. How To Order. reduced size of equipment
ApogeeAero Roller Sizes Please Indicate The Following: Other Quality Products Available: Project Reference and Location Metal Insulators Small Roller How To Order 1.000 2,000 lbs. 1,000 lbs. Model number:
More informationmarkilux 730 / 830 The drop-arm cassette awning with gas piston-tensioned arms the awning that gives you just the amount of shade you need
VERTICAL BLDS AND CONSERVATORY AWNGS safe timeless beautiful markilux 730 / 830 The drop-arm cassette awning with gas piston-tensioned arms the awning that gives you just the amount of shade you need rated
More informationPRESSURE REDUCING CONTROL VALVE
PRESSURE REDUCING CONTROL VALVE 06/08 Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Reducing setpoint is adjustable 2 (AOS) X P/L Standard Components 1 Main
More informationEstablished Leaders in Valve Actuation. RCI265 Scotch Yoke Actuator For Quarter-Turn Valves
Established Leaders in Valve Actuation Scotch Yoke Actuator For Quarter-Turn Valves Remote Control Actuators - Quality Controlled Since the company was founded in 1961, Remote Control has become the standard
More informationMidwest Roadside Safety Facility
22860 900" D D 914 36" 1000 39 3/8" SOIL AND TARMAC CUT-OUT CONCRETE TARMAC BRIDGE DECK B PLAN VIEW C A C 15 20 [3/4"] Deck Gap BRIDGE DECK A 3900 153 1/ Impact 30V 45720 1800" 34290 13" 11430 4" RAIL
More informationKolbenschmidt Pierburg Group
Kolbenschmidt Pierburg Group KS Aluminum Pistons for Truck Applications Requirements The development of on- and off-highway diesel engines for a wide spectrum of applications is affected by global emission
More informationMustang Series PRESSURE REDUCING CONTROL VALVE. M115 (Globe) M1115 (Angle) Schematic. Standard Components. Options & Accessories.
PRESSURE REDUCING CONTROL VALVE 02/09 Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Reducing setpoint is adjustable 2 (AOS) P/L Standard Components 1 Main Valve
More informationAIR OPERATED GREASE PUMPS AND KITS PUMPMASTER 3 20 PUMPMASTER PUMPMASTER 6 21 GREASE PUMP KITS 22 PUMP ACCESSORIES 23
AIR OPERATED GREASE PUMPS AND KITS PUMPMASTER 3 20 PUMPMASTER 3+3 20 PUMPMASTER 6 21 GREASE PUMP KITS 22 PUMP ACCESSORIES 23 404 100 / 407 200 / 409 200 PUMPMASTER 3 & 3+3 PUMPMASTER 3, 55:1 PRESSURE RATIO
More informationDISC BRAKES. Section 4. Components and Operation of Disc Brakes. Disc Brake Assembly
DISC BRAKES Components and Operation of Disc Brakes A disc brake assembly consists of a: cast iron disc (disc rotor) that rotates with the wheel. caliper assembly attached to the steering knuckle. friction
More informationThe Advantages of Linear Direct Drives
Linear Direct Drives High throughput, high precision, and maintenance-free: Linear direct drives from Kollmorgen set the standard for performance and effectiveness. These are brushless 3-phase servo motors
More informationPRESSURE REDUCING VALVE
Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Closes quickly when downstream pressure exceeds reduced pressure setpoint 3 PRESSURE REDUCING VALVE with SURGE
More informationBI-ECCENTRIC Disc Retention Valve
05/11/2015 - Oscillating disc retention valve with dual eccentricity and straight seat. - Option of manufacturing WAFER type or with flange boring in accordance with customer requirements. - Distance between
More informationApplications: Benefits: Specifications TTV KKV KTV HD
Applications: Heavy duty slow speed triplex pumps, flows to 42 lpm and pressures to 4300 psi (300 bar). As used on Aussie Monsoon series electric pressure cleaners and BB series Drive System: 4 pole electric
More informationTemposonics. Magnetostrictive, Absolute, Non-contact Linear-Position Sensors. R-Series Models RP and RH Ethernet POWERLINK.
Temposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors R-Series Models RP and RH Ethernet POWERLINK SENSORS Document Part Number 551191 Revision A Data Sheet Model RP Profile-style
More informationO RINGS, GASKETS, DIAPHRAGMS SIZING GUIDE FDA AND USP CLASS VI
O RINGS, GASKETS, DIAPHRAGMS SIZING GUIDE FDA AND USP CLASS VI O -Rings PRODUCTS OF INTEGRITY...FROM PEOPLE OF INTEGRITY How to size your O -Rings Newman Elastomer Characteristics If you don t know the
More informationDESIGN ENGINEERS O-RING SIZE GUIDE
DESIGN ENGINEERS O-RING SIZE GUIDE INTRODUCTION: Substantially all O-ring manufacturers present their catalog data in the rotation of groupings or families of cross-sectional thickness first, then followed
More informationMASON INDUSTRIES, Inc.
DYNAMIC NATURAL FREQUENCY (Hertz) 30 20 10 8 6 MASON INDUSTRIES, Inc. Manufacturers of Vibration Control Products 350 Rabro Drive 2101 W. Crescent Ave., Suite D Hauppauge, NY 11788 Anaheim, CA 92801 631/348-0282
More informationPP Series Pneumatic Actuators
PDF Published February 4, 07 PP Series Pneumatic Actuators for Chemline ball valves up to 6 MATERIAL: Polyamide SERIES: PPS Spring Return PPD Double Acting CONTROL PRESSURE: 40 to 0 psi OUTPUT TORQUES:
More informationAGE-S. Application example. Compensation XYZ Compensation Units Heavy Loads. Payload up to 100 kg. Compensation path XY up to ± 14 mm
AGE-S Sizes 100.. 200 Payload up to 100 kg Compensation path XY up to ± 14 mm Compensation path Z up to 12 mm Application example Picking up and setting down components from a rack with a 3-finger centric
More informationTemposonics. Magnetostrictive, Absolute, Non-contact Linear-Position Sensors. R-Series Models RP and RH DeviceNet Output.
Temposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors R-Series Models RP and RH DeviceNet Output SENSORS Document Part Number 550651 Revision F Data Sheet Model RP Profile-style position
More informationHot-Air Hand Tools. TRIAC ST TRIAC AT HOT JET S GHIBLI AW General accessories
Technical Textiles & Industrial Fabrics Product overview hot-air welders SEAMTEK 900 AT VARIANT T1 VARIANT T1 Overlap VARIANT T1 TAPE UNIPLAN E / UNIPLAN S TAPEMAT / TAPEMAT SPRIEGEL 46 / 47 48-50 51 52
More informationInnovative PPS Blow-Molded Air Duct for Turbocharged Diesel Engine
Innovative PPS Blow-Molded Air Duct for Turbocharged Diesel Engine High Performance Polymers for Automotive Powertrain Applications Duane Emerson Ticona Engineering Polymers SPE ACCE Conference September
More informationThe friction free alternative
Rolling The Rolling Diaphragm Air Cylinder The advent of the long stroke rolling diaphragm as a means of low-friction dynamic sealing has led to the development of the ControlAir Diaphragm Air Cylinder.
More information