Description Product group Rod seal
|
|
- Daniella Glenn
- 6 years ago
- Views:
Transcription
1 Description Product group Rod seal Design N symmetrical u-ring (05) NI asymmetrical u-ring with inner main sealing lip (07) Profile no. 05/07 Specification E suitable for onesided pressure load Model STI inner back-up ring (07) Seal material NBR Seal back NBR fabric NBR F Back-up ring POM (07) Operational application limits Pressure (MPa): 20 (05), 40 (07) Temperature ( C): -30 to +100 Running speed (m/s): 0.5 Media Hydraulic oils acc. to DIN Part 1 3, lubricating oils, mineral oil based lubricating greases, highly nonflammable hydraulic fluids HFA, HFB, HFC acc. to VDMA Installation U-rings can be installed in both solid and split housings. Please note for a solid housing application a minimum width is necessary and suitable installation tools may be required (please see installation section on page 9). Remarks The SN 05 and SNI 07 seals require relatively small installation housings. Due to the compact fabric back, intrusion into the extrusion gap is prevented. Order code Please include our item numbers in your order. Should you require nonstandard dimensions, materials or material combinations, please use the order code on page 12. Any seal. Any time. All the items in our standard programme (marked red) are standard stock items. For all other items, please check the availability at Function The u-rings SN 05 and SNI 07 are produced in a compact design which guarantees good functioning at low pressures. Both compact seals are single-acting seals. The SN 05 has a symmetrical design that allows application as a piston and rod seal. The SNI 07 compact seal additionally has an integrated back-up ring which also prevents gap extrusion at high pressures on the side facing away from the pressure. DICHTOMATIK Any seal. Any time.
2 30423 SNI 07 E STI SN 05 E SN 05 E SNI 07 E STI SN 05 E SN 05 E SN 05 E SN 05 E SN 05 E SNI 07 E STI SN 05 E SN 05 E SN 05 E SN 05 E SNI 07 E STI SNI 07 E STI SNI 07 E STI SN 05 E SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SN 05 E SNI 07 E STI SNI 07 E STI SNI 07 E STI SN 05 E SNI 07 E STI SN 05 E SNI 07 E STI SN 05 E SNI 07 E STI SNI 07 E STI SN 05 E SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SN 05 E SNI 07 E STI SN 05 E SNI 07 E STI SN 05 E SNI 07 E STI SNI 07 E STI SN 05 E SN 05 E SNI 07 E STI SNI 07 E STI SNI 07 E STI SN 05 E SNI 07 E STI SN 05 E SN 05 E SNI 07 E STI
3 SNI 07 E STI SNI 07 E STI SN 05 E SNI 07 E STI SNI 07 E STI SNI 07 E STI SN 05 E SN 05 E SNI 07 E STI SN 05 E SNI 07 E STI SN 05 E SNI 07 E STI SNI 07 E STI SN 05 E SN 05 E SN 05 E SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SN 05 E SNI 07 E STI SN 05 E SN 05 E SNI 07 E STI SN 05 E SNI 07 E STI SN 05 E SN 05 E SNI 07 E STI SN 05 E SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SN 05 E SNI 07 E STI SNI 07 E STI SN 05 E SN 05 E SN 05 E SNI 07 E STI SN 05 E SNI 07 E STI SN 05 E SN 05 E SNI 07 E STI SN 05 E SN 05 E SN 05 E SNI 07 E STI SN 05 E
4 SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SN 05 E SNI 07 E STI SN 05 E SNI 07 E STI SN 05 E SNI 07 E STI SN 05 E SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SN 05 E SNI 07 E STI SNI 07 E STI SN 05 E SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SN 05 E SN 05 E SN 05 E SNI 07 E STI SNI 07 E STI SN 05 E SN 05 E SNI 07 E STI SNI 07 E STI SN 05 E SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SN 05 E SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SN 05 E SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SN 05 E SNI 07 E STI SNI 07 E STI
5 65138 SNI 07 E STI SNI 07 E STI SN 05 E SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SN 05 E SNI 07 E STI SN 05 E SN 05 E SNI 07 E STI SN 05 E SNI 07 E STI SNI 07 E STI SNI 07 E STI SN 05 E SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SN 05 E SN 05 E SN 05 E SN 05 E SN 05 E SNI 07 E STI SN 05 E SNI 07 E STI SNI 07 E STI SN 05 E SNI 07 E STI SNI 07 E STI SN 05 E SNI 07 E STI SNI 07 E STI SNI 07 E STI SN 05 E SNI 07 E STI SNI 07 E STI SNI 07 E STI SN 05 E SNI 07 E STI SN 05 E SNI 07 E STI SN 05 E SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SN 05 E SNI 07 E STI SNI 07 E STI SNI 07 E STI
6 SNI 07 E STI SN 05 E SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SN 05 E SNI 07 E STI SN 05 E SNI 07 E STI SN 05 E SNI 07 E STI SN 05 E SNI 07 E STI SNI 07 E STI SNI 07 E STI SN 05 E SNI 07 E STI SNI 07 E STI SN 05 E SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SN 05 E SNI 07 E STI SNI 07 E STI SN 05 E SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SN 05 E SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SN 05 E SNI 07 E STI SN 05 E SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SN 05 E SNI 07 E STI SN 05 E SN 05 E SNI 07 E STI SNI 07 E STI SNI 07 E STI SN 05 E
7 SNI 07 E STI SN 05 E SNI 07 E STI SN 05 E SN 05 E SNI 07 E STI SNI 07 E STI SNI 07 E STI SN 05 E SN 05 E SNI 07 E STI SNI 07 E STI SN 05 E SNI 07 E STI SNI 07 E STI SNI 07 E STI SN 05 E SNI 07 E STI SNI 07 E STI SN 05 E SN 05 E SN 05 E SNI 07 E STI SN 05 E SNI 07 E STI SNI 07 E STI SN 05 E SNI 07 E STI SN 05 E SNI 07 E STI SNI 07 E STI SNI 07 E STI SN 05 E SNI 07 E STI SNI 07 E STI SNI 07 E STI SN 05 E SNI 07 E STI SN 05 E SNI 07 E STI SNI 07 E STI SNI 07 E STI SN 05 E SNI 07 E STI SNI 07 E STI SN 05 E SNI 07 E STI SNI 07 E STI SNI 07 E STI SN 05 E SNI 07 E STI SNI 07 E STI SNI 07 E STI SN 05 E SNI 07 E STI
8 44324 SN 05 E SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SN 05 E SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SN 05 E SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SN 05 E SNI 07 E STI SN 05 E SNI 07 E STI SN 05 E SNI 07 E STI SN 05 E SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SN 05 E SNI 07 E STI SN 05 E SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SN 05 E SN 05 E SNI 07 E STI SNI 07 E STI SN 05 E SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SN 05 E SNI 07 E STI
9 57288 SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI SNI 07 E STI
DICHTOMATIK. Hydraulic seals
Titel Hydraulik 2008 GB:Titel 2008 10.09.2008 17:08 Uhr Seite 2 DICHTOMATIK Hydraulic seals DICHTOMATIK Hydraulic seals Albert-Schweitzer-Ring 1 D-22045 Hamburg P.O. Box 70 04 80 D-22004 Hamburg Phone
More informationOperating conditions. Surface roughness R a R max
Merkel U-Ring NI 300 Merkel U-Ring NI 300 Asymmetrical sealing lips PUR profile ring Sealing edge Material Material Code Hardness Polyurethane 94 AU 925 94 Shore A Operating conditions Material 94 AU 925
More informationPOLYPAC - Selemaster SM. Single Acting Compact Rod Seal With Anti-extrusion Ring Material: Rubber + Fabric Reinforced Rubber + POM
Single Acting Compact Rod Seal With Anti-extrusion Ring Material: Rubber + Fabric Reinforced Rubber + POM 85 86 Selemaster SM The rod seal range has been designed to meet the needs of hydraulic equipments
More informationMerkel U-Ring Seal Set 0216
Merkel U-Ring Seal Set 0216 Merkel U-Ring Seal Set 0216 NBR U-ring Backring Fabric U-ring NBR Cotton fabric Code 80 NBR B246 BI-NBR B4 B248 Back-up ring Fig. 1 Merkel U-Ring Seal Set 0216 Product description
More informationMerkel Compact Seal S 8
Merkel Compact Seal S 8 Merkel Compact Seal S 8 Material Rubber head Fabric part Material Code Hardness Nitrile rubber NBR 70 NBR B209 70 Shore A Operating conditions Fig. 1 Merkel Compact Seal S 8 Product
More informationClaronPolyseal Single Acting Rod Seal PVM & PV
M & Metric tyle and M is a acting rod or piston seal for medium to heavy duty applications. The assembly consists of a male and female header and a series of 'V'. The number of 'V' may be varied to alter
More informationMerkel U-Ring NI 300. Hydraulics Rod Seals Merkel U-Ring NI 300. Merkel U-Ring NI 300. Material. Operating conditions. Product description
Merkel U-Ring NI 300 Merkel U-Ring NI 300 Asymmetrical sealing lips PUR profile ring Sealing edge Material Material Code Hardness Polyurethane 94 AU 925 94 Shore A Operating conditions Material 94 AU 925
More informationPolon Piston sealing set
The double-acting piston sealing set profile consists of a PTFE piston sealing ring and an elastomer O-Ring as a preloading element. Profile is particularly suitable for double-acting pistons in control
More informationCompact Seal. DUOPAC rubber fabric reinforced compact seals Type DPS and DPC. Busak+ Shamban
DUOPAC rubber fabric reinforced compact seals Type DPS and DPC Description The compact seals DUOPAC DPS and DPC types are double acting piston seals with integrated guide rings. DUOPAC has been designed
More informationPolon Rod sealing set
The single-acting rod sealing set profile consists of a PTFE rod sealing ring and an elastomer O-Ring as a preloading element. The asymmetrical cross-section of the slipper ring is designed for best drag
More informationØ range <500 mm. Ø range >500 mm. Operating conditions. Surface quality. Surface roughness R a R max
Hyraulics Ro Seals Merkel U-Ring T 20 Merkel U-Ring T 20 Merkel U-Ring T 20 PUR profile ring Material range
More informationOther materials are available on request. Operating conditions
Merkel U-Ring T 18 Merkel U-Ring T 18 Asymmetrical sealing lip POM back-up ring PUR profile ring Profile ring Coe Harness Polyurethane 95 AU V142 95 Shore A Fig. 1 Merkel U-Ring T 18 Back-up ring Polyacetal
More informationSTANDARD SHAFT SEALS VC
STANDARD SHAFT SEALS VC DESCRIPTION The VC profile is a shaft seal composed of a single metal cage with a rubber coating and a primary sealing lip without a spring. ADVANTAGES Very good static sealing
More informationSKF SEAL JET DD. Machined seals product range
SKF SEAL JET DD Machined seals product range 2 Content A Introduction Machined seals concept... 5 Sealing materials... 6 Introduction... 6 Thermoplastic elastomers - Polyurethanes... 7 Thermoplastic elastomers
More informationSTANDARD SHAFT SEALS VB
STANDARD SHAFT SEALS VB DESCRIPTION The VB profile is a shaft seal composed of a single external metal cage with an internal rubber coating and a primary sealing lip without a spring. ADVANTAGES Good radial
More informationHunger DFE GmbH Tandem Seal. Hunger DFE Tandem Seal
Hunger DFE GmbH Tandem Seal Hunger DFE Tandem Seal Hunger DFE Tandem Seals were particularly designed for application as rod and piston seals. Two types of this product range shall be presented at this
More informationSTANDARD SHAFT SEALS SC
STANDARD SHAFT SEALS SC DESCRIPTION The SC profile is a shaft seal composed of a single metal cage with a rubber coating and a primary lip with integrated spring. ADVANTAGES Very good static sealing Very
More informationZurcon U-Cup RU2. Single Acting U-Cup Asymmetric, Double Lip, Compact Material: Zurcon
Single Acting U-Cup Asymmetric, Double Lip, Compact Material: Zurcon 121 122 U-Cup RU2 Description Today U-Cups are used primarily as seals for piston rods in hydraulic cylinders. U-Cups in polyurethane
More informationUPN. Rod and piston seal with energizing element UPN
Rod and piston seal with energizing element MATERIAL 1 1 Type Polyurethane Designation SEALPUR 93 Hardness 93 ShA 2 2 Type Nitril Rubber NBR Designation RUBSEAL 70 Hardness 70 ShA Pressure 400 bar FIELD
More informationSHAFT SEALS WITH PTFE COATING TCJ
SHAFT SEALS WITH PTFE COATING TCJ DESCRIPTION The TCJ profile is a shaft seal composed of a single metal cage with a rubber coating, PTFE-coated double sealing lip and integrated spring. ADVANTAGES Very
More informationDICHTOMATIK. Bonded Seals US/USS
DICHTOMATIK Bonded Seals US/USS US/USS Bonded seals (US, USS) are metal washers with a trapezoidal elastomer sealing lip vulcanised to their inner diameter. Description Product group Type Sealing material
More informationDMR STYLE MPSB STYLE MPSA-58 STYLE MPSA.
STYLE MPSB Double-acting three piece piston seal. 70 Durometer Nitrile with fabric reinforced Nitrile and Nylon guide rings. The sealing action is effected by the fabric reinforced Nitrile member at the
More informationDICHTOMATIK Sealing mechanism
DICHTOMATIK Sealing mechanism Static tightness on the outer surface The primary task of the outer surface of the rotary shaft seal is to ensure static tightness in the housing bore, i.e. the passage of
More informationno adhesion effect on sliding surface, even after a long standstill superior performance over a wide range of temperatures and hydraulic fluids
Industrial Seal Inc. offers a wide range of hydraulic and pneumatic Piston seal profiles to meet the broad demands of the fluid power industry. These Piston seals are offered in a variety of compounds
More informationZURCON L-CUP. - Single Acting - Innovative Design based on U-Cup - Low Friction Properties - Material - Polyurethane Busak+ Shamban
contents (catalogue) main menu product range fullscreen/variable R ZURCON L-CUP - Single Acting - Innovative Design based on U-Cup - Low Friction Properties - Material - Polyurethane 81 82 Zurcon R L-Cup
More informationMerkel Double Wiper PT 2
Merkel Double Wiper PT 2 Merkel Double Wiper PT 2 Material O-rings Profile ring Profile ring Material PTFE bronze compound Code PTFE B602 Fig. 1 Merkel Double Wiper PT 2 O-ring Material Code Hardness Nitrile
More informationPrecision Seals for Pneumatics
Precision Seals for Pneumatics Parker-Prädifa are the result of many years of compound and profile development experience, allowing the pneumatics engineer to pursue new design options and techniques such
More informationOperating conditions. * Surface roughness of the sliding surface to suit the sealing component used.
Merkel Wiper P 6 Merkel Wiper P 6 Material Wiper lip Material Code Hardness Nitrile rubber NBR 85 NBR B247 85 Shore A Fluoro rubber FKM 85 FKM K664 85 Shore A Operating conditions Fig. 1 Merkel Wiper P
More informationPrecision seals for pneumatics
Precision seals for pneumatics Parker Prädifa pneumatic seals are the result of many years of compound and profile development experience, allowing the pneumatics engineer to pursue new design options
More informationGROUPCODE NEN : ANSI : STEEL BS : STEEL
RETAINING RINGS FOR BORES - NORMAL TYPE - ➁ DIN : 4 8 8 9 10 11 1 13 14 15 s 0,8 0,8 1 1 1 1 1 1 ring d3 8, 9,8 10,8 11,8 13 14,1 15,1 16, d4 3 3, 3,3 4,1 4,9 5,4 6,, d 8,4 9,4 10,4 11,4 1,5 13,6 14,6
More informationRB NOK Asymmetrical Profile Rod U-Cup with Double Lip RB asymmetrical C-cup is suited for heavy
RB NOK Asymmetrical Profile Rod U-Cup with Double Lip RB asymmetrical C-cup is suited for heavy duty mobile and stationary service when rod leakage must be kept to a minimum. Double lip design reduces
More informationIn case the operating parameters are requested at maximum level, these values may not be achieved.
All information contained in our catalogue is released only for general usage and not valid for special applications. Given parameters such as maximum pressure, temperature, sliding speed, surface contact
More informationPOLYPAC R WRM/C B+S SA
POLYPAC R WRM/C B+S SA - Single Acting - - With Metal Case - - For open Assembly - -Material- - NBR and Metal - 75 76 Scraper WRM/C - SA Scraper WRM/C - SA Description WRM/C and SA are mould-vulcanised
More informationInline Filter MFM. Flow rates up to 100 l/min Pressure range up to 280 bar Material: EN-GJS / steel E /01.04
Inline Filter MFM Flow rates up to 100 l/min Pressure range up to 280 bar Material: EN-GJS 400-15 / steel 1. TECHNICAL SPECIFICATIONS 1.1. FILTER HOUSING Construction The inline filter consists of a filter
More informationExamples 3/2-way valve A T NO: Symbol
1/1 Hauhinco-3_2-way valve_b1_dn3-25_pn320_pn500_x,y-intern water s 01/2016 3/2-way valve B1 X,Y - DN3 DN25 PN320, PN500 Features: Hydraulically actuated directional seat valve controlling liquid media.
More informationAIR FILTERS AND FILLER BREATHERS FA3 / FB1 / FB2 / FT series ACCESSORIES HYDRAULIC SYMBOL
ACCESSORIES AIR FILTERS AND FILLER BREATHERS FA3 / FB1 / FB2 / FT series The air breather filters are integral part of the filtration within the hydraulic system, as they retain the environment contamination
More informationV-Rings around the clock... around the clock...
Description V-rings are rotary seals that can perform numerous jobs in their function of sealing rotating shafts: sealing against the penetration of dirt, dust, water or watery pollutants, combination
More informationMerkel Sealing Technology for the Ferrous & Non-Ferrous Processing Industries
Merkel Sealing Technology for the Ferrous & Non-Ferrous Processing Industries Merkel Heavy Industry 2 Merkel Sealing Technology Seals and Sealing Systems for the Ferrous & Non-Ferrous Processing Industries
More informationCustomized machined seals. Product range
Customized machined seals Product range Contents The SKF brand now stands for more than ever before, and means more to you as a valued customer. While SKF maintains its leadership as a high-quality bearing
More informationMerkel Sealing Technology for the METALLURGICAL INDUSTRY. Freudenberg Sealing Technologies
Merkel Sealing Technology for the METALLURGICAL INDUSTRY Freudenberg Sealing Technologies 2 Merkel Sealing Technology for the METALLURGICAL INDUSTRY Installation recommendations for sealing systems plus
More informationDiaphragm/piston pressure switches 250 V
0186/ 0187 Diaphragm/piston pressure switches 250 V www.suco.de Stainless steel (1.4305) body With changeover switch and silver contacts Max. voltage 250 V, overpressure safe to 300/600 bar *) See page
More informationTurcon RotoGlydRing. Latest information available at Edition August
Turcon RotoGlydRing 241 242 Turcon Roto Glyd Ring n TURCON ROTARY SEALS - ELASTOMER ENERGIZED n Turcon Roto Glyd Ring Description The Turcon Roto Glyd Ring is used to seal rods, shafts, axles, bores, rotary
More informationDiaphragm pressure switches up to 42 V with brass housing. Brass housing M3 screw terminal Overpressure safety up to 500 psi (35 bar) 1) Male thread
0167 Diaphragm pressure switches with brass housing Brass housing M3 screw terminal Overpressure safety up to 500 psi (35 bar) Adjustment range tolerance at room temperature Male thread NO : NC : 36 Screw
More informationMN-06. Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series. Order code MN HN-142
Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series Order code -310-HN-142 Series and function Standard coil 1) (with plug socket 28-ST-01) 141 = 12 V DC, 4.2
More informationScraper WRM. Single Acting Material: NBR Elastomer
Scraper WRM Single Acting Material: NBR Elastomer 73 74 Scraper WRM Scraper WRM Description Scraper rings are essential components of any hydraulic or pneumatic equipment. These are protection components
More informationMade of zinc-plated steel (CrVI-free) M3 screw terminal Overpressure safety up to 4,350 psi (300 bar) 1) Male thread
M.3 0166 Diaphragm pressure switches with M3 screw terminal Made of zinc-plated steel (CrVI-free) M3 screw terminal Overpressure safety up to 4,350 psi (300 bar) Adjustment range tolerance at room temperature
More informationIntermot Hydraulic Motors. Drum Brakes RC Series
Intermot Hydraulic Motors Drum Brakes RC Series TECHNICAL CATALOGUE INDEX General information Pag. 10 Technical data Pag. 14 Dimensional drawings Pag. 15 Ordering instructions Pag. 17 9 Hydraulic fluids
More informationPressure Switches 30 A/F
CE Marking Directives of the European Council Machinery Directive EMC Directive Low Voltage Directive Pressure Switches 30 A/F Changeover switch Equipment that falls under these directives must have a
More informationReturn fi lters. FRI series. Maximum pressure up to 20 bar - Flow rate up to 1500 l/min. Return fi lters
Return fi lters series Maximum pressure up to bar - Flow rate up to 15 l/min 193 Return fi lters GENERAL INFORMATION Technical data Return filter Maximum pressure up to bar - Flow rate up to 15 l/min Filter
More informationTurcon Glyd Ring. Double Acting Rubber Energized Plastic Faced Seal Material: Turcon, Zurcon and Elastomer
Turcon Glyd Ring Double Acting Rubber Energized Plastic Faced Seal Material: Turcon, Zurcon and Elastomer 15 Turcon Glyd Ring 16 Turcon Glyd Ring Turcon Glyd Ring Description Successfully used for decades,
More informationAxial Piston Units for Use with HF Fluids
RE 90 223/11.99 Replaces: 09.90 Axial Piston Units for Use with HF Fluids For mineral oil based fluids for axial piston units, see data sheet RE 90220 For environmentally acceptable fluids for axial piston
More informationAdditional products. Lip seals 50. Springs / Bonded seals 51. Hydraulic seals for high pressure 52. Hydraulic seals for medium high pressure 53
Lip seals 50 Springs / Bonded seals 51 Hydraulic seals for high pressure 52 Hydraulic seals for medium high pressure 53 O-Rings / Incofep 54 Vibration dampers 55 Mechanical Face Seals 56 Cassette Seals
More informationErmeto Original Rotary fittings
Ermeto Original Rotary fittings Visual index EO rotary fittings DG 0 DG 02-R DG 02-M p. P6 p. P7 p. P8 EO 2 cone end / Male BSPP thread Male metric thread EO 2 cone end ED-seal (ISO 79) / EO 2 cone end
More informationElectronic Pressure Switches
96 Pressure Switches Electronic Pressure Switches Electronic Electronic pressure switches, series, Very attractively priced electronic pressure switches, particularly for high volume deployment High overpressure
More informationW SERIES TECHNICAL CATALOGUE
WHEEL MOTOR W SERIES TECHNICAL CATALOGUE W 05 INDEX GENERAL INFORMATION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Pag. 2 W 05 G100 (Fixed displacement) (SIZE AND TECHNICAL DATA) -
More informationPneumatic Seals 1/2 Pneumatic Seals 2/2. Pneumatic Seals
Seals Seals * 1 Mpa = 10 Bar 1 Bar = 14.5 psi 1 Mpa = 145 psi Combination Wiper/Rod Seal This pneumatic rod seal/wiper Set profile is fitted into housings with a circlip recess according DIN 7993 (type
More informationAngle Seat Valve 7010
Angle Seat Valve 7 DN 8 up to DN 8 PN 16 - PN Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. Compact design Unaffected by lightly contaminated
More informationAngle Seat Valve 7010
Angle Seat Valve 7 DN 8 up to DN 8 PN 16 - PN 4 Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. Compact design Unaffected by lightly
More information3/2-Way Valve DN 15 up to DN 40
3/-Way Valve 78 DN up to DN Pneumatically operated 3/-way valve for the control of neutral and slightly aggressive media. (Stainless steel version, Data sheet Type 78) ompact design Unaffected by lightly
More informationStraight Bodied Flanged Valve 7030 DN 15 up to DN 150 PN 16
Straight Bodied Flanged Valve 7030 DN 15 up to DN 150 PN 16 Pneumatically operated straight bodied seat valve for the use in chemical plants, process technology and industrial automation. Unaffected by
More informationDR magnetic piston. Compact Magnetic Sophisticated
DR magnetic piston Compact Magnetic Sophisticated DR Magnetic piston Compact Magnetic Sophisticated Guiding area Magnet Steel disc Spring space for single-acting cylinders Static sealing area Cushioning
More informationExplosion-Protected Pressure Switches
Explosion-Protected Pressure Switches To new ATEX Standard TECHNICAL DATA 0165 0340 0341 Degree of protection: IP 65 ATEX protection zone: 1 22 22 Switching power: 1 A / 250 VAC 0.25 A / 250 VDC 2 A /
More informationZurcon U-Cup RU /*"-8#+-8 " (&*$8 " %*+(+$4
Zurcon U-Cup RU9 Your Partner for Sealing Technology Trelleborg Sealing Solutions is a major international sealing force, uniquely placed to offer dedicated design and development from our market-leading
More informationTechnical News Bulletin
Technical News Bulletin August, 2015 FPS Valve Tester and FPS Valve Repair 1 Introduction Emhart Glass FPS technology has become a well accepted product to improve plunger operation, and parison formation.
More informationPressure Filter DF...K P, DF...M P, Flange Mounted
Pressure Filter, DF...M P, Flange Mounted up to 550 l/min, up to 260 bar DF...M P 330...1.X 160 240 280 500...1.X 660...1.X 660...2.X 990...2.X 1320...2.X 660...3.X 990...3.X 1320...3.X 1. TECHNICAL SPECIFICATIONS
More informationDescription. Piston rod end. Technical data. Datasheet Type 46 Single rod cylinder according to ISO 6022 / DIN 24333
CE CV LE MM KF MM KK Datasheet Type 46 Single rod cylinder according to ISO 6022 / DIN 24333 Description - Standard cylinder to ISO 6022, DIN 24333 - Strokes up to 2000 mm - Piston diameter: 40 320 mm
More informationZBD 1001 Differential Cylinder Data sheet 04.16/DS13210
ZBD 1001 Differential Cylinder Data sheet 04.16/DS13210 Description: This series represents the logical and consistent supplementation of already ISO 6022 (250 bar) and ISO 6020/1 (160 bar) standard series.
More informationElectronic Pressure Switches
96 Pressure Switches Electronic Pressure Switches Electronic E. Electronic pressure switches, series, Very competitively priced electronic pressure switches High overpressure protection (up to x) Small,
More informationHYDRAULIC-MOTORS. Radial Piston Motors with fixed displacement RM...X series V g = 250 cm 3 /rev cm 3 /rev
s with fixed displacement RM...X series V g = 250 cm 3 /rev - 900 cm 3 /rev HYDRAULIC-MOTORS Catalogue No. HM1-015E RM 250X - RM 900X Page 2 Features: many displacements for all applications very high
More informationPNN 320 DN Features. Valve Valve. pistons are Valve. Optically and with. the opened. of the. normally switch (8). Example.
1/11 Hauhinco-2_2-way seat _C3-DN12_125_PN320_X-Y-actuated water s 10/20161 C3 X,Y - actuated PNN 320 DN12 125 Features Hydraulically actuated directional seat controlling liquid media. Actively controllable
More informationReturn Line Filter HF4R up to 450 l/min, up to 10 bar
Return Line Filter HF4R up to 450 l/min, up to 10 bar 9" 18" 27" 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The filter housings are designed in accordance with international regulations.
More informationPressure Filter for Manifold Mounting DFP and for Reversible Flow DFPF
Pressure Filter for Manifold Mounting DFP and for Reversible Flow DFPF up to 600 l/min, up to 315 bar 60 110 140 160 240 280 330 500 660 1.X 660 2.X 990 1320 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING
More informationSHAFT-EZE SHAFT SLEEVES
We Are Seals SHAFT SLEEVES SHAFT SLEEVES Vendor Number 131610 WE ARE seals. Better seals. Better Support. It s not marketing speak or something we aspire to be. Seals are in our DNA. Everything we do is
More informationShaft seals around the clock... around the clock... The structure of a shaft seal is characterised by:
Description Shaft seals are rotary seals. They are used to seal rotating or swivelling machine elements (mainly shafts). The areas of application are diverse and can be found in all areas of mechanical
More informationPolyseal Total Sealing Technology
ontents ompany Profile Product Range Index Product Range Section / Piston Seals Section B S/ Piston Seals Section Rod Seals Section Rod Wipers Section E Bearing rings Section F ORings & Backup Rings Other
More informationDimensions and types. Type BA. Type BAS
and types BA Way wipers of this type are used mainly in those cases where installation conditions are restrictive, or where the wipers are additionally protected by means of a telescopic cover, a bellows,
More informationChange-Over Pressure Filter DFDK
Change-Over Pressure Filter up to 2500 l/min, up to 315 bar 30 60 110 140 160 240 280 330 500 660 1.x 660 2.x 990 2.x 1320 2.x 1320 3.x 2640 3.x 3960 3.x 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING
More information3/2-Way Valve DN 15 up to DN 40. Technical Information. normal function, normally closed. distributing, mixing function and shut - off function
3/2-Way Valve 78 DN 1 up to DN 4 Pneumatically operated 3/2-way valve for the control of neutral and slightly aggressive media. (Stainless steel version, Data sheet Type 781) Compact design Unaffected
More informationPRODUCT OVERVIEW SEALS AND SERVICES TAILOR-MADE SEALS AND SERVICE PORTFOLIO
PRODUCT OVERVIEW SEALS AND SERVICES TAILOR-MADE SEALS AND SERVICE PORTFOLIO SEALING AND SERVICE COMPETENCY FROM A SINGLE SOURCE WHEREVER YOU ARE WE ARE NEARBY With its 14 locations worldwide, DICHTOMATIK
More informationMERKEL P7 Wiper Single-acting rod wiper made from Polyurethane with integrated metal retainer. PUR wiper for axial-accessible housings.
Página 1 de 5 PT 1 MERKEL PT 1 Low Friction Wiper Low friction wiper consisting of one profile ring with a sealing edge and a wiper edge, as well as two O-Rings as pre-load components. A wiper for improvement
More informationHydraulic Components. Bellhousings Damping elements Cooling systems Oil tanks.
Hydraulic Components Bellhousings Damping elements Cooling systems Oil tanks www.ktr.com ALUMINIUM TANK BAK HYDRAULIC COMPONENTS Tank with oil collecting groove Tank with oil collecting groove BAK 13 View
More information/ / Solid rubber press-on tyres
/ / press-on tyres 164 / / press-on tyres product overview Press-on tyres We produce one of the most comprehensive range of VULKOLLAN and PEVOPUR press-on tyres. We also offer an extensive product range
More informationDCS- series. Classic
DCS- series Classic Classic standard models 80 HEAT REJECTION HP @ 100F ETD 70 60 50 40 30 20 10 0 DCS60 DCS45 DCS30 DCS20 DCS16 DCS10 0 10 20 30 40 50 60 70 80 90 OIL FLOW - GPM Specifications: Maximum
More informationmmetric Master Seals Catalogue 05/06
mmetric NR Master Seals Catalogue NR Contents Metric Seals Seal Index Piston Double Acting 01 Piston Seals 02 Glide Rings 03 Piston Rings 04 Pneumatic Piston and Seal Piston Single Acting 05 Piston Seals
More informationErmeto Original Rotary fittings
Ermeto Original Rotary fittings Visual index EO rotary fittings DG 0 DG 02-R DG 02-M p. P6 p. P7 p. P8 EO 2 cone end / Male BSPP thread Male metric thread EO 2 cone end ED-seal (ISO 79) / EO 2 cone end
More informationNC or NO, maximum operating voltage up to 42 V. Large selection of electrical plug-in types for quick attachment and reliable connection
M.1 Pressure switches hex 24 with integrated connector Large selection of electrical plug-in types for quick attachment and reliable connection High protection class (to IP67 or IP6K9K) Compact and rugged
More informationTranseals Pty Ltd. Phone 61 (8) Fax 61 (8) Web
Phone 61 (8) 9451 6011 Fax 61 (8) 9458 5766 Web http://www.transeals.com.au Email seals@transeals.com.au ABN 29 008 902 163 1 Atlas Court, Welshpool, Western Australia, 6106 PO Box 15, Welshpool, Western
More informationMN-06. Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series. Order code MN HN-142
3/2-way Technical data for series Order code -310-HN-142 Series and function Standard coil 1) (with plug socket 28-ST-01) 141 = 12 V DC, 4.2 W 142 = 24 V DC, 4.2 W 152 = 24 V AC, 7/4 VA 156 = 115 V AC,
More informationAKG 2009 (changes and errors expected) HC- series. Classic
AKG 2009 (changes and errors expected) Classic performance hc @ 1750 RPM FAN SPEED HEAT REJECTION Horsepower Removed @ 100-F ETD 640 320 160 80 40 20 10 HC26 @ 3450 RPM HC14 @ 3450 RPM HC66 HC48 HC32 HC240
More information2/2-way proportional seat valve
1/1 Hauhinco-2_2-way_proportional seat valve_dn10-pn320_pn500 water hydraulics 01/2016 2/2-way proportional seat valve Directly actuated DN10 PN320, PN500 Features: Directly actuated directional seat valve
More informationElectrically operated valves Series M-22, 3/2-, 5/2- and 5/3-way G1/ Nl/min (3.354 Cv)
Electrically operated valves Series M-22, 3/2-, 5/2- and 5/3-way G1/2 3300 Nl/min (3.35 Cv) Order code Series and function M-22-310-HN-12 Standard coils 1) 11 = 12 V DC,,2 W 12 = 2 V DC,,2 W 22 = 2 V AC,
More informationGLOBAL STANDARD COOLER
GLOBAL STANDD COOLER GLOBAL STANDD RUGGED ENVIRONMENT COOLING SYSTEMS PRODUCT INFORMATION AKG CooL-Line is a standard line of products from the market leader in high performance aluminium cooling systems.
More informationGLOBAL STANDARD COOLER
GLOBAL STANDD COOLER AKG 009 (changes and errors expected) Sales@SouthwestThermal.com p. 888-6-8 f. 80-484-0049 www.akgcoolers.com GLOBAL STANDD Rugged Environment COOLING SYSTEMS Product Information AKG
More informationGLOBAL STANDARD COOLER
COOLER RUGGED ENVIRONMENT COOLING SYSTEMS PRODUCT INFORMATION AKG CooL-Line is a standard line of products from the market leader in high performance aluminum cooling systems. AKG is best known for its
More informationHydraulic cylinders type CC - round heads with counterflanges to ISO nominal pressure 25 MPa (250 bar) - max 32 MPa (320 bar)
www.atos.com Table B-/E Hydraulic cylinders type CC - round heads with counterflanges to ISO 60 - nominal pressure MPa (0 bar) - max MPa (0 bar) SWC Cylinders Designer Software for assisted selection of
More informationPressure Filters DF...M A / DF...Q E DF...MHA / DF...MHE Flow rates up to 500 l/min Pressure range up to 315 bar Material: SG Iron/ADI, Steel
Manifold Mounted, Rear Flanged Pressure Filters DF...M A / DF...Q E DF...MHA / DF...MHE Flow rates up to 5 l/min Pressure range up to 35 bar Material: SG Iron/ADI, Steel . DESCRIPTION.. FILTER HOUSING
More informationElectrical Boom Section Valve Modular-Fit / Quick-Fit
Electrical Boom Section Valve Modular-Fit / Quick-Fit The modular construction of altek s valves allows unlimited configuration possibilities for section valves. The variants range from a simple shut off
More informationButterfly valves. Ghibson Italia s.r.l. via Cassola 6/ Monteveglio (BO) Italy
Butterfly valves pneumatic electric hydraulic pneumatic actuators Technical features 1 Elements list 2 Tables 3 torque 3 dimensions 5 Solenoids 6 options and 6 Declutchable gearboxes 7 electric actuators
More informationGLOBAL STANDARD COOLER
GLOBAL STANDARD COOLER D D MOBILE HYDRAULIC OIL-TO-AIR COOLING SYSTEMS Product Information AKG-Line is a standard line of products from the market leader in high performance aluminium cooling systems.
More informationGENERAL INFORMATION HYDRAULIC MOTORS ITALY
GENERAL INFORMATION INTERMOT produces RADIAL PISTON since 1985: our yearly production is more than 13.000 units which we sell all over the world through our agents and authorized sellers. Our motor range
More information