Ermeto Original Rotary fittings

Size: px
Start display at page:

Download "Ermeto Original Rotary fittings"

Transcription

1 Ermeto Original Rotary fittings

2 Visual index EO rotary fittings DG 0 DG 02-R DG 02-M p. P6 p. P7 p. P8 EO 2 cone end / Male BSPP thread Male metric thread EO 2 cone end ED-seal (ISO 79) / EO 2 cone end ED-seal (ISO 79) / EO 2 cone end DG 03 DG 0-R DG 0-M p. P9 p. P0 p. P EO 2 cone end / Male BSPP thread Male metric thread EO 2 cone end ED-seal (ISO 79) / EO 2 cone end ED-seal (ISO 79) / EO 2 cone end DG 05 DG 06-R DG 06-M p. P2 p. P3 p. P EO 2 cone end / Male BSPP thread Male metric thread EO 2 cone end ED-seal (ISO 79) / EO 2 cone end ED-seal (ISO 79) / EO 2 cone end DG 07 DG 08 DG 208 p. P5 p. P6 p. P7 EO 2 cone end / EO 2 cone end / EO 2 cone end EO 2 cone end DVGE-R DVGE-M p. P8 p. P9 Male BSPP thread Male metric thread ED-seal / EO 2 cone end ED-seal / EO 2 cone end DVWE-R DVWE-M p. P20 p. P2 Male BSPP thread Male metric thread ED-seal / EO 2 cone end ED-seal / EO 2 cone end P2

3 DG Ball bearing rotary fittings For working pressures up to 250 bar. Higher working pressures upon request! Favourable pressure/rpm ratio Application: Connecting a fi xed point to a rotating, swinging or moving machine part via hoses. To prevent torsion and to avoid small hose radius. Flow media: Hydraulic oils and lubricants on mineral oil base. Also for hydraulic fl uids HETG and HEES. Not suitable for corrosive and HFC-fl uids or gases. Construction: Compact, maintenance-free construction, service-proved. Combined ball and plain bearing with constant lubrication. Low starting torque. Wear-resistant annular piston sealings. Materials: Casing, body nut of steel, annular piston sealing: POM (e. g. Delrin)/FKM. Eolastic sealing: NBR (e.g. Perbunan), also available in FKM. Construction systems: 8 different versions with one rotational axis. Multiaxial rotary couplings on request. Tube connections according to DIN 2353, series S. Maximum working pressure 250 bar (peak pressure) Male stud sealing by Eolastic seals of NBR. Male stud with metric parallel or BSPP thread. Assembly instructions: The life of a rotary fi tting depends considerably on a stressfree line connection. Therefore the direct connection with tubes is to be avoided. For connection of hoses the use of swivel nut fi ttings (DIN 3865) is recommended. We recommend short, straight hose lines (free hose length approx. 5 hose O.D.). Thus shocks, vibrations etc. are absorbed. Surface: Cr(VI)-free. Nominal temperatures: 25 C up to +80 C. Warehousing: Ball bearing rotary fi ttings can be stocked for 6 months. Ware housing up to year is possible with storage conditions acc. to DIN 776. Perbunan = registered trademark of Bayer Number of revolutions and starting torques: Chart Tube DN Nominal Permissible number of revolutios (rpm.) under a working pressure of Initial torque at O.D. diameter (mm) 25 bar 6 bar 00 bar 60 bar 250 bar 250 bar/nm P P3

4 DG Ball bearing rotary fittings ring piston 8 intermediate ring 7 rubber spring 6 base 5 pivot ball 3 top 2 raceway dust seal position specifi cation P

5 Plain bearing rotary fittings for slow rotating, swinging or moving machine parts up to 0 bar (series L) or up to 00 bar (series S). Rotary fittings Application: Connecting a fi xed point to a rotating, swinging or moving machine part via hoses. To prevent torsion and to avoid small hose radius. Flow media: Hydraulic oils and lubricants on mineral oil base. Also for hydraulic fl uids HETG and HEES. Not suitable for corrosive and HFC-fl uids or gases. Male thread DN Safety nut Thrust bearing disc Guide fitting Eolastic sealing O-ring Spiral PTFE ring Nominal temperature: For sealings of NBR: 35 C up to +00 C. For sealings of FKM: 25 C up to +20 C. Tube O.D. DN Nominal diameter mm 06L 06S 08L 08S 5 0L 0S 6 2L 2S 8 5L S 6S 0 8L 22L 20S 25S 6 28L 30S 22 35L 3L 38S 25 Construction: Compact, maintenance-free construction, service-proved. Materials: Casing, body nut and progressive ring of steel. Sealing of NBR (Perbunan), on request of FKM. Plain bearing rotary fi ttings are not available in stainless steel or brass. Surface: Cr(VI)-free. Construction-system: Series L, tube O. D. 6 to 35 mm, working pressure (PN): 0 bar Series S, tube O. D. 6 to 38 mm, working pressure (PN): 00 bar Tube connection according to DIN 2353, ISO 83-. Male stud with metric thread and BSP thread. Sealing of male stud by Eolastic-seals. Perbunan = registered trademark of Bayer Number of revolutions: Series L Tube O.D Permiss. no. rpm Series S Tube O.D Permiss. no rpm Assembly instruction: The life of a rotary fi tting depends considerably on a stressfree line connection. Therefore the direct connection with tubes is to be avoided. For connection of hoses use of swivel nut connections (DIN 3865) is recommended. We recommend short, straight hose lines (free hose length approx. 5 hose O. D.). Thus shocks, vibrations etc. are absorbed. P P5

6 DG 0 Straight ball bearing rotary union EO 2 cone end / EO 2 cone end X2) Axis D Weight Series 5 DN L L2 L3 S S2 S3 g/ piece Order code* CF ) S ) DG0/06SOMD Pressure rating see chart DG0/08SOMD Pressure rating see chart DG0/2SOMD Pressure rating see chart DG0/6SOMD Pressure rating see chart DG0/20SOMD Pressure rating see chart DG0/25SOMD Pressure rating see chart DG0/30SOMD Pressure rating see chart DG0/38SOMD Pressure rating see chart 0 Cr(VI)-free CF DG0/06SOMDCF VIT P6

7 DG 02-R Straight male stud ball bearing rotary union Male BSPP thread ED-seal (ISO 79) / EO 2 cone end X) Axis X2) Eolastic-sealing D Weight Series 5 T DN D3 L L2 L3 L S S2 S3 g/ piece Order code* CF ) S ) 06 G / A DG02/06SROMD Pressure ratings see chart 08 G / A DG02/08SROMD Pressure ratings see chart 2 G 3/8 A DG02/2SROMD Pressure ratings see chart 6 G /2 A DG02/6SROMD Pressure ratings see chart 20 G 3/ A DG02/20SROMD Pressure ratings see chart 25 G A DG02/25SROMD Pressure ratings see chart 30 G / A DG02/30SROMD Pressure ratings see chart 38 G /2 A DG02/38SROMD Pressure ratings see chart 0 P Cr(VI)-free CF DG02/06SROMDCF VIT/NBR P7

8 DG 02-M Straight male stud ball bearing rotary union Male metric thread ED-seal (ISO 997) / EO 2 cone end X) Axis X2) Eolastic-sealing D Weight Series 5 T DN D3 L L2 L3 L S S2 S3 g/ piece Order code* CF ) S ) 06 M DG02/06SMOMD Pressure ratings see chart 08 M DG02/08SMOMD Pressure ratings see chart 2 M DG02/2SMOMD Pressure ratings see chart 6 M DG02/6SMOMD Pressure ratings see chart 20 M DG02/20SMOMD Pressure ratings see chart 25 M DG02/25SMOMD Pressure ratings see chart 30 M DG02/30SMOMD Pressure ratings see chart 38 M DG02/38SMOMD Pressure ratings see chart 0 Cr(VI)-free CF DG02/06SMOMDCF VIT/NBR P8

9 DG 03 Elbow ball bearing rotary union EO 2 cone end / EO 2 cone end X2) Axis D Weight Series 5 DN L L2 L3 L L5 L6 S S2 S3 g/ piece Order code* CF ) S ) DG03/06SOMD Pressure ratings see chart DG03/08SOMD Pressure ratings see chart DG03/2SOMD Pressure ratings see chart DG03/6SOMD Pressure ratings see chart DG03/20SOMD Pressure ratings see chart DG03/25SOMD Pressure ratings see chart DG03/30SOMD Pressure ratings see chart DG03/38SOMD Pressure ratings see chart 0 P Cr(VI)-free CF DG0/06SOMDCF VIT P9

10 DG 0-R Elbow male stud ball bearing rotary union Male BSPP thread ED-seal (ISO 79) / EO 2 cone end X) Axis X2) Eolastic-sealing D Weight Series 5 T DN D3 L L2 L3 L L6 S S2 S3 g/ piece Order code* CF ) S ) 06 G / A DG0/06SROMD Pressure ratings see chart 08 G / A DG0/08SROMD Pressure ratings see chart 2 G 3/8 A DG0/2SROMD Pressure ratings see chart 6 G /2 A DG0/6SROMD Pressure ratings see chart 20 G 3/ A DG0/20SROMD Pressure ratings see chart 25 G A DG0/25SROMD Pressure ratings see chart 30 G / A DG0/30SROMD Pressure ratings see chart 38 G /2 A DG0/38SROMD Pressure ratings see chart 0 Cr(VI)-free CF DG0/06SROMDCF VIT/NBR P0

11 DG 0-M Elbow male stud ball bearing rotary union Male metric thread ED-seal (ISO 997) / EO 2 cone end X) Axis X2) Eolastic-sealing D Weight Series 5 T DN D3 L L2 L3 L L6 S S2 S3 g/ piece Order code* CF ) S ) 06 M DG0/06SMOMD Pressure ratings see chart 08 M DG0/08SMOMD Pressure ratings see chart 2 M DG0/2SMOMD Pressure ratings see chart 6 M DG0/6SMOMD Pressure ratings see chart 20 M DG0/20SMOMD Pressure ratings see chart 25 M DG0/25SMOMD Pressure ratings see chart 30 M DG0/30SMOMD Pressure ratings see chart 38 M DG0/38SMOMD Pressure ratings see chart 0 P Cr(VI)-free CF DG0/06SMOMDCF VIT/NBR P

12 DG 05 Double elbow ball bearing rotary union EO 2 cone end / EO 2 cone end X) Axis D Series 5 Weight DN L L2 L3 L L5 L6 L7 L8 L9 S S2 S3 g/ piece Order code* CF ) S ) DG05/2SOMD Pressure ratings see chart DG05/6SOMD Pressure ratings see chart DG05/20SOMD Pressure ratings see chart DG05/25SOMD Pressure ratings see chart DG05/30SOMD Pressure ratings see chart DG05/38SOMD Pressure ratings see chart 0 Cr(VI)-free CF DG05/2SOMDCF VIT P2

13 DG 06-R Double elbow male stud ball bearing rotary union Male BSPP thread ED-seal (ISO 79) / EO 2 cone end (Adjustable at male thread axis, consisting of DG05 + EGE) X) Axis X2) Eolastic-sealing D Series 5 Weight T DN D3 L L2 L3 L5 L6 L7 S S2 S3 S g/ piece Order code* CF ) S ) 2 G 3/8 A DG06/2SROMD Pressure ratings see chart 6 G /2 A DG06/6SROMD Pressure ratings see chart 20 G 3/ A DG06/20SROMD Pressure ratings see chart 25 G A DG06/25SROMD Pressure ratings see chart 30 G / A DG06/30SROMD Pressure ratings see chart 38 G /2 A DG06/38SROMD Pressure ratings see chart 0 P Cr(VI)-free CF DG06/06SROMDCF VIT/NBR P3

14 DG 06-M Double elbow male stud ball bearing rotary union Male metric thread ED-seal (ISO 997) / EO 2 cone end (Adjustable at male thread axis, consisting of DG05 + EGE) X) Axis X2) Eolastic-sealing D Series 5 Weight T DN D3 L L2 L3 L5 L6 L7 S S2 S3 S g/ piece Order code* CF ) S ) 2 M DG06/2SMOMD Pressure ratings see chart 6 M DG06/6SMOMD Pressure ratings see chart 20 M DG06/20SMOMD Pressure ratings see chart 25 M DG06/25SMOMD Pressure ratings see chart 30 M DG06/30SMOMD Pressure ratings see chart 38 M DG06/38SMOMD Pressure ratings see chart 0 Cr(VI)-free CF DG06/06SMOMDCF VIT/NBR P

15 DG 07 Straight bulkhead ball bearing rotary union EO 2 cone end / EO 2 cone end X) Axis D Series 5 Weight DN T L L2 L3 L L5 L6 S S2 S3 S g/ piece Order code* CF ) S ) M DG07/06SOMD Pressure ratings see chart M DG07/08SOMD Pressure ratings see chart M DG07/2SOMD Pressure ratings see chart M DG07/6SOMD Pressure ratings see chart M DG07/20SOMD Pressure ratings see chart M DG07/25SOMD Pressure ratings see chart M DG07/30SOMD Pressure ratings see chart M DG07/38SOMD Pressure ratings see chart 0 P Cr(VI)-free CF DG07/06SOMDCF VIT P5

16 DG 08 Elbow bulkhead ball bearing rotary union EO 2 cone end / EO 2 cone end X) Axis D Series 5 DN Weight T L L2 L3 L L5 L6 L7 L8 S S2 S3 S g/ piece Order code* CF ) S ) M DG08/06SOMD Pressure ratings see chart M DG08/08SOMD Pressure ratings see chart M DG08/2SOMD Pressure ratings see chart M DG08/6SOMD Pressure ratings see chart M DG08/20SOMD Pressure ratings see chart M DG08/25SOMD Pressure ratings see chart M DG08/30SOMD Pressure ratings see chart M DG08/38SOMD Pressure ratings see chart 0 Cr(VI)-free CF DG08/06SOMDCF VIT P6

17 DG 208-R Double elbow male stud ball bearing rotary union Male BSPP thread ED-seal (ISO 79) / EO 2 cone end T D L6 L L5 S3 S2 X) L3 A ) A 2) S L2 L S L7 D DN DN D Series 5 T DN L L2 L3 L L5 L6 L7 S S2 S3 S Order code* CF ) S ) 2 G3/8A 8 6,8 5,3 39,8 39,8 2 52,5 70, DG208/2SOMD Pressure ratings see chart 6 G/2A 2 6,5 56,5 39,8 39,8 53,0 73, DG208/6SOMD Pressure ratings see chart 20 G3/A 6 8,5 7,5 56,5 56,5 6 7,5 95, DG208/20SOMD Pressure ratings see chart 25 GA 6 89,5 77,5 56,5 56,5 8 7,5 00, DG208/25SOMD Pressure ratings see chart 38 G /2A 32 0,0 88,0 65,3 65, ,3 2, DG208/38SOMD Pressure ratings see chart 0 P Cr(VI)-free CF DG208/2SOMDCF VIT P7

18 DVGE-R Straight male stud plain bearing rotary union Male BSPP thread ED-seal / EO 2 cone end X) Eolastic-sealing L8 larger than DIN 3852 chart page P2 D Weight PN (bar) ) Series 5 T DN D3 L L2 L3 L5 L6 S S2 S3 g/ piece Order code* CF VIT L 3 ) 06 G / A DVGE06LROMD G / A DVGE08LROMD G 3/8 A DVGE0LROMD G /2 A DVGE2LROMD G 3/ A DVGE5LROMD G A DVGE8LROMD G A DVGE22LROMD G / A DVGE28LROMD G /2 A DVGE35LROMD 0 0 S ) 06 G / A DVGE06SROMD G / A DVGE08SROMD G 3/8 A DVGE0SROMD G /2 A DVGE2SROMD G 3/ A DVGESROMD G 3/ A DVGE6SROMD G A DVGE20SROMD G A DVGE25SROMD G / A DVGE30SROMD G /2 A DVGE38SROMD ) L = light series; 0 Cr(VI)-free CF DVGE06LROMDCF NBR FKM VITCF DVGE06LROMDVITCF P8

19 DVGE-M Straight male stud plain bearing rotary union Male metric thread ED-seal / EO 2 cone end X) Eolastic-sealing L8 larger than DIN 3852 chart page P2 D Weight PN (bar) ) Series 5 T DN D3 L L2 L3 L5 L6 S S2 S3 g/ piece Order code* CF VIT L 3 ) 06 M DVGE06LMOMD M DVGE08LMOMD M DVGE0LMOMD M DVGE2LMOMD M DVGE5LMOMD M DVGE8LMOMD M DVGE22LMOMD M DVGE28LMOMD M DVGE35LMOMD 0 0 S ) 06 M DVGE06SMOMD M DVGE08SMOMD M DVGE0SMOMD M DVGE2SMOMD M DVGE6SMOMD M DVGE20SMOMD M DVGE25SMOMD M DVGE30SMOMD M DVGE38SMOMD ) L = light series; P 0 Cr(VI)-free CF DVGE06LMOMDCF NBR FKM VITCF DVGE06LMOMDVITCF P9

20 DVWE-R Elbow male stud plain bearing rotary union Male BSPP thread ED-seal / EO 2 cone end X) Eolastic-sealing L8 larger than DIN 3852 chart page P2 D Weight PN (bar) ) Series 5 T DN D3 L L2 L3 L5 L6 L7 S S2 S3 g/ piece Order code* CF VIT L 3 ) 06 G / A DVWE06LROMD G / A DVWE08LROMD G 3/8 A DVWE0LROMD G /2 A DVWE2LROMD G 3/ A DVWE5LROMD G A DVWE8LROMD G A DVWE22LROMD G / A DVWE28LROMD G /2 A DVWE35LROMD 0 0 S ) 06 G / A DVWE06SROMD G / A DVWE08SROMD G 3/8 A DVWE0SROMD G /2 A DVWE2SROMD G 3/ A DVWESROMD G 3/ A DVWE6SROMD G A DVWE20SROMD G A DVWE25SROMD G / A DVWE30SROMD G /2 A DVWE38SROMD ) L = light series; 0 Cr(VI)-free CF DVWE06LROMDCF NBR FKM VITCF DVWE06LROMDVITCF P20

21 DVWE-M Elbow male stud plain bearing rotary union Male metric thread ED-seal / EO 2 cone end X) Eolastic-sealing L8 larger than DIN 3852 chart page P2 D Weight PN (bar) ) Series 5 T DN D3 L L2 L3 L5 L6 L7 S S2 S3 g/ piece Order code* CF VIT L 3 ) 06 M DVWE06LMOMD M DVWE08LMOMD M DVWE0LMOMD M DVWE2LMOMD M DVWE5LMOMD M DVWE8LMOMD M DVWE22LMOMD M DVWE28LMOMD M DVWE35LMOMD 0 0 S ) 06 M DVWE06SMOMD M DVWE08SMOMD M DVWE0SMOMD M DVWE2SMOMD M DVWE6SMOMD M DVWE20SMOMD M DVWE25SMOMD M DVWE30SMOMD M DVWE38SMOMD ) L = light series; P 0 Cr(VI)-free CF DVWE06LMOMDCF NBR FKM VITCF DVWE06LMOMDVITCF P2

22 Port tapping for plain bearing rotary fittings DVGE and DVWE Port tapping form X according to DIN 3852, part and part 2 (for parallel male studs) Thread d small a L9 L8 W d +0. max min min M M ) M M M ) M ) M G / A 20 2 ) G 3/8 A G /2 A 28 2 ) G 3/ A G A 2 ) G / A 5 2 ) G /2 A ) Not in DIN ) Different from DIN 3852 P22

Ermeto Original Rotary fittings

Ermeto Original Rotary fittings Ermeto Original Rotary fittings Visual index EO rotary fittings DG 0 DG 02-R DG 02-M p. P6 p. P7 p. P8 EO 2 cone end / Male BSPP thread Male metric thread EO 2 cone end ED-seal (ISO 79) / EO 2 cone end

More information

RHD/V/Z non return valve

RHD/V/Z non return valve RHD/V/Z non return valve Design with sealing edge: Size 06L and 08L / 06S and 08S and all sizes in stainless steel with a PTFDE sealing disc. Design with O-ring (item. 7): Sizes L, 2L, 5L, 8L, 22L, 28L,

More information

3- and 4-Way Ball Valves KH3/KH4

3- and 4-Way Ball Valves KH3/KH4 3- and 4-Way Ball Valves KH3/KH4 up to 500 bar up to DN 20 KH3 KH4 1. DESCRIPTION 1.1. GENERAL According to DIN 2429, HYDAC 3/2 and 4/2 way ball valves are units which shut off and divert the flow of an

More information

2/2- and 3/2-way Ball Valve with pneumatic rotary actuator, plastic body, DN 10-50

2/2- and 3/2-way Ball Valve with pneumatic rotary actuator, plastic body, DN 10-50 /- and 3/-way Ball Valve with pneumatic rotary actuator, plastic body, DN -50 Radially expandable body Pneumatic actuator in compact model Optical position indicator Control valve acc. to NAMUR Type 5

More information

LF 3600 Push-In Fittings Range

LF 3600 Push-In Fittings Range LF 300 Push-In Fittings Range Stud Fittings Straights 375 BSPT Page 1-97 301 BSPP/Metric Page 1-97 31 Metric Page 1-97 31 BSPP/Metric Page 1-9 321 BSPT Page 1-9 331 BSPP/Metric Page 1-9 300 Page 1-9 Push-In

More information

SensoControl Test Points Diagnostic- Test equipment Industrial Products

SensoControl Test Points Diagnostic- Test equipment Industrial Products Test Points Diagnostic- Test equipment Industrial Products Parker Visual index Series 1 Test point fi tting with pin-lock EMA1 GMA1 VKA1 p. Q4 p. Q5 p. Q6 Series 3 Test point with threaded connection M

More information

Rapid push-in fittings for plastic tubes Series 1000

Rapid push-in fittings for plastic tubes Series 1000 CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Rapid push-in fittings for plastic tubes Series 1000 Tube external diameters: 5/3, 6/, 8/6, 10/8, 12/10, 15/12,5 mm Fittings threads: metric (M5, M6,

More information

Ø5 (Ø.20) S12,65 x 1,5. M16 x 1,5 * 2 Special thread: buttress thread S12,65 x 1,5. Max. Working Pressure: 400 bar / 5801 PSI Burst Pressure:

Ø5 (Ø.20) S12,65 x 1,5. M16 x 1,5 * 2 Special thread: buttress thread S12,65 x 1,5. Max. Working Pressure: 400 bar / 5801 PSI Burst Pressure: Test Hoses SMS / SS + Working Pressure up to 630 bar / 9135 PSI Technical Data for Test Hose A B (Stard Version) C D Nominal Bore () (mm) Max. Working Pressure (PN) (bar / PSI) 00 / 5801 630 / 9135 30

More information

LIQUIfit Push-In Fittings

LIQUIfit Push-In Fittings LIQUIfit Push-In Fittings This "eco-designed" range proposes an innovative alternative for water applications; no fluid contamination occurs and environmental protection is guaranteed. These fittings ensure

More information

2/2-way Angle Seat Valve, manually operated, for media up to +180 C

2/2-way Angle Seat Valve, manually operated, for media up to +180 C 2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel valve body Compact industrial design with long service life /2702 can be combined

More information

Type Pressure Transmitter with display. Pressure Transmitter. Technical data. DN15-50 Body material. Stainless steel 316L Actuator material

Type Pressure Transmitter with display. Pressure Transmitter. Technical data. DN15-50 Body material. Stainless steel 316L Actuator material 2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel 316L valve body Compact industrial design with long service life Excellent

More information

2/2-way Angle Seat Valve, manually operated, for media up to +180 C

2/2-way Angle Seat Valve, manually operated, for media up to +180 C 2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel 316L valve body Compact industrial design with long service life /2702 can

More information

Hose, Tubes & Ducting. Hose, Tubes & Ducting

Hose, Tubes & Ducting. Hose, Tubes & Ducting Hose, Tubes & Ducting 382 Together, we can kick out the cost of contamination 80% of all hydraulic failures are caused by poor maintenance and contamination. So let s put a stop to it today! Partner with

More information

Hose, Tubes & Ducting. Hose, Tubes & Ducting

Hose, Tubes & Ducting. Hose, Tubes & Ducting Hose, Tubes & Ducting 392 Together, we can kick out the cost of contamination 80% of all hydraulic failures are caused by poor maintenance and contamination. So let s put a stop to it today! Partner with

More information

LF 3800/LF 3900 Push-In Fittings Range

LF 3800/LF 3900 Push-In Fittings Range LF 300/LF 3900 Push-In Fittings Range Stud Fittings Straights 305 3905 BSPT Page 1-79 305 Page 1-79 301 3901 BSPP/Metric Page 1-79 321 3921 BSPT Page 1-0 321 3921 Page 1-0 331 3931 BSPP/Metric Page 1-0

More information

2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, DN 10-50

2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, DN 10-50 2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, 10-50 (2652) (2655) 2 or ball valve Pneumatic actuator Compact design Visual position indicator Types 2652/2655 can be

More information

Variable Displacement Plug-In Motor A6VE

Variable Displacement Plug-In Motor A6VE Electric Drives and Controls Hydraulics Linear Motion and Assembly echnologies Pneumatics Service Variable Displacement Plug-In Motor A6VE RE 91 606/06.05 1/16 Replaces: 05.99 echnical data sheet Series

More information

Axial piston variable pump (A)A4VSO

Axial piston variable pump (A)A4VSO Axial piston variable pump (A)A4VSO RA 92050-A/06.09 1/64 Replaces: 09.97 Data sheet Series 10, 11 and 30 Size 40...1000 Nominal pressure 5100 psi (350 bar) Peak pressure 5800 psi (400 bar) Open circuit

More information

2/2 and 3/2-way ball valve with pneumatic rotary actuator

2/2 and 3/2-way ball valve with pneumatic rotary actuator 2/2 and 3/2-way ball valve with pneumatic rotary actuator Pneumatic rotary actuator Stainless steel ball valve External regulation of the pistons Full bore Type 8805 can be combined with Favourable flow

More information

2/2-way Angle-Seat Valve for media up to +180 C, threaded port connection, DN 13-65

2/2-way Angle-Seat Valve for media up to +180 C, threaded port connection, DN 13-65 2/2-way Angle-Seat Valve for media up to +180 C, threaded port connection, DN 13-65 Standard valve body Type 2000 can be combined with Short valve body High flow rate and long life cycle Very high cycle

More information

2/2-way Globe Valve for media up to +180 C, DN

2/2-way Globe Valve for media up to +180 C, DN 2/2-way Globe Valve for media up to +180 C, DN 10-100 Compact globe valve version Flange, threaded and welded ports as standard Stainless steel 316L valve body vailable with flow direction below and above

More information

EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI

EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI Over 30 patents, more than 8,000 standard articles, and 2,000 customized solutions impressively

More information

Rotary Plug Valve BR 23e

Rotary Plug Valve BR 23e PTFE-lined Rotary Plug Valve BR 23e Application: PTFE-lined rotary plug valve for aggressive media, especially due to high demands in chemical plants: Nominal diameter: DN 25, DN 50, DN 80 and NPS1, 2,

More information

2/2 or 3/2 way ball valve with pneumatic rotary actuator

2/2 or 3/2 way ball valve with pneumatic rotary actuator 2/2 or 3/2 way ball valve with pneumatic rotary actuator Pneumatic rotary actuator Stainless steel ball valve External regulation of the pistons Full bore Type 8805 can be combined with Favourable flow

More information

Axial piston variable pump A7VO

Axial piston variable pump A7VO Axial piston variable pump A7VO RE 92203/06.09 1/52 Replaces: 05.99 Data sheet Series 63 Sizes NG250 to 500 Nominal pressure 350 bar Peak pressure 400 bar Open circuit Contents Type code for Standard program

More information

Swivel Joint Heads (Basic Unit)

Swivel Joint Heads (Basic Unit) Swivel Joint Heads (Basic Unit) Design Configuration Weld edge preparation according to DIN 2559 or ANSI B16.25 Grease nipple/ ball Lifetime greasing Grease nipple only on request Stator Rotor Internal

More information

Ferulok Flareless Bite Type Fittings

Ferulok Flareless Bite Type Fittings Flareless Bite Type Fittings Flareless SAE 080101 / Flareless Flareless SAE 080601 / Flareless Flareless SAE 080102 / NPTF Flareless SAE 080120 / SAE-ORB Flareless SAE 080103 / NPTF Flareless SAE 080221

More information

Change-Over Inline Filter RFLD Weld Version

Change-Over Inline Filter RFLD Weld Version Change-Over Inline Filter RFLD Weld Version up to 15000 l/min, up to 16 bar RFLD 1300 CAS to RFLD 15000 CBW 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The fi lter housings are designed

More information

Function Fittings. Flow Control Regulators. Piloted Function Fittings. Non-Return Valves. LIQUIfit Pressure Fittings. Other Function Fittings

Function Fittings. Flow Control Regulators. Piloted Function Fittings. Non-Return Valves. LIQUIfit Pressure Fittings. Other Function Fittings Flow Control Regulators Piloted Non-Return Valves LIQUIfit Pressure Fittings Other Silencers Flow Control Regulators (P. 4-6) Blocking Fittings (P. 4-36) Piloted Non-Return Valves (P. 4-38) Function:

More information

short name: 3WL.IG* technical product sheet created :57 1/6 3-way ball valve F/F PN 63 with pneumatic actuator hard anodized aluminum

short name: 3WL.IG* technical product sheet created :57 1/6 3-way ball valve F/F PN 63 with pneumatic actuator hard anodized aluminum with pneumatic actuator hard anodized aluminum technical product sheet short name: 3WL.IG* 3-way ball valve F/F PN 63 E-Box MV Port Modell G Kugel Bauart RE06 RE06 1 1 1/ 1/ 3/" 1 1/ 1 1/ 3/" 1 1/ 1 1/

More information

BR 26d Ball valve. Stainless Steel. Application: Versions: Special versions:

BR 26d Ball valve. Stainless Steel. Application: Versions: Special versions: Application: Stainless Steel BR 26d Ball valve Tight-closing Ball valve made of stainless steel for corrosive media, especially to meet high process requirements in chemical plants: Nominal sizes DN 15

More information

Hyva Hoses & Adapters Introduction

Hyva Hoses & Adapters Introduction Introduction Hyva Hoses Hoses offered by HYVA comply with the highest safety standards for truck hydraulics. Working pressures range from 225 to 350 bar. Code system hydraulic hoses Hose 1 H.P. 16-2000

More information

Data sheet - Selected technical standards

Data sheet - Selected technical standards DIN DIN 13-5 DIN 13-6 ISO general purpose metric screw threads Part 5: Nominal sizes for 1 mm and 1.25 mm fi ne pitch threads; nominal diameter from 7.5 mm to 200 mm ISO general purpose metric screw threads

More information

ANACONDA MULTIFLEX CONDUIT TYPE UI-CAP

ANACONDA MULTIFLEX CONDUIT TYPE UI-CAP ANACONDA MULTIFLEX CONDUIT TYPE Small diameters, flexible and very corrosion resistant Anaconda Multifl ex type is a small bore, fl exible, fully interlocked, corrosion resistant stainless steel AISI-304

More information

Drain ball valve BR 21a

Drain ball valve BR 21a PTFE - lined Drain ball valve BR 21a Application: Tight-closing PTFE-lined drain ball valve for corrosive media, especially for high process demand in chemical plants: Nominal sizes DN 50 to DN 150 Nominal

More information

Fitting assembly. Catalogue /UK

Fitting assembly. Catalogue /UK F2 Table of contents Port connections M...F4 Port connections BSPP...F5 Port connections UNF...F6 Port connections TAPER...F7 Adjustable fi ttings with locknut...f8 F EO swivels...f9 Triple-Lok / O-Lok

More information

Swivel Joints Rotary Unions

Swivel Joints Rotary Unions Maschinenbau GmbH & Co. KG Swivel Joints Rotary Unions since 1970 Knowledge and experience General Information We about us Klaas Maschinenbau GmbH & Co. KG was founded in the year 1970 and is an independent

More information

Flanged Ball Valves KHBF / KHMF / KHMFF

Flanged Ball Valves KHBF / KHMF / KHMFF Flanged Ball Valves KHBF / KHMF / KHMFF Model code (also order example) KHBF 16 PN040 11141 02 X... Designation KHBF = Block-type ball valve DN 16-25 (steel) KHMF = Sleeve-type ball valve DN 32-50 (steel)

More information

MARCH Polyethylene Piping Systems.

MARCH Polyethylene Piping Systems. MARCH 2017 Polyethylene Piping Systems www.plasson.com.au GLOBAL PRESENCE LOCAL COMMITMENT Get an expert on your team. Plasson has the widest range of compression, electrofusion, threaded and transitional

More information

Item Component Remarks Type 4393 Type ), SA Vulcanized soft seal disc SA L SA L

Item Component Remarks Type 4393 Type ), SA Vulcanized soft seal disc SA L SA L Available designs materials Materials Item Component Remarks 3 4 1 Base / Inlet body 2 Outlet body Threaded connection Flange connection 2.1 Outlet adaptor Flange connection 2.4 Outlet flange Flange connection

More information

DATA SHEET TB 23b. BR 23b Rotary plug valve Stainless steel rotary plug valve in DIN - Version. Applications. Versions

DATA SHEET TB 23b. BR 23b Rotary plug valve Stainless steel rotary plug valve in DIN - Version. Applications. Versions DATA SHEET TB 23b BR 23b Rotary plug valve Stainless steel rotary plug valve in DIN - Version Applications Stainless steel rotary plug valve with high fl ow capacity for technical process plants, especially

More information

Microbore Hose, Assemblies & accessories

Microbore Hose, Assemblies & accessories bar DN2 and DN4 High pressure Microbore hose Technical data Microbore hose The microbore hose assembly, most commonly used to connect to a Minimess test point for pressure testing, has many other diverse

More information

Description Product group Rod seal

Description Product group Rod seal Description Product group Rod seal Design N symmetrical u-ring (05) NI asymmetrical u-ring with inner main sealing lip (07) Profile no. 05/07 Specification E suitable for onesided pressure load Model STI

More information

4200/4400 ONE-PIECE NON-SKIVE COUPLINGS

4200/4400 ONE-PIECE NON-SKIVE COUPLINGS 4200/4400 ONE-PIECE NON-SKIVE COUPLINGS 4200/4400 couplings have been engineered to match a wide range of latest generation hose types to provide assemblies that meet the highest global standards. Ferrules

More information

Pneumatics CONTENT

Pneumatics CONTENT Pneumatics CONTENT 2 3 4 5 6 7 8 9 Fittings 453 Flexible Tube 47 Quick Release Couplings 477 Actuators 485 Solenoid & Pneumatic Valves 495 Mechanical & Manual Valves 507 Automatic Valves 57 Filters, Regulators

More information

Fittings and Accessories. for Centralized Lubrication Systems and General Use

Fittings and Accessories. for Centralized Lubrication Systems and General Use and Accessories 1-0103-US 1 Fittings and Accessories 1-0103-US for Centralized Lubrication Systems and General Use Fittings and Accessories 1-0103-US 3 Contents Page Adaptors... 9, 10 Banjo fittings...

More information

Triple Eccentric Control and Shut-off Butterfly Valve Series 14t

Triple Eccentric Control and Shut-off Butterfly Valve Series 14t Application: Triple Eccentric Control and Shut-off Butterfly Valve Series 14t Triple eccentric butterfly valve providing excellent shut-off in all industrial applications: Nominal size DN 80 to DN 400

More information

Series 810: 2 Way Angle Body Valves: 1/4 to 3 NPT

Series 810: 2 Way Angle Body Valves: 1/4 to 3 NPT Series 810: 2 Way Angle Body Valves: 1/4 to 3 NPT FEATURES Compact design, high fl ow rates Visual position indicator standard For temperatures from 22 F to +430 F / -30 C to 221 C Working pressures up

More information

INOX PrOgram made by eisele

INOX PrOgram made by eisele EISELE INOXline Program Stainless steel connection solutions Quality solutions Made by EISELE INOX 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY Over 30 patents, more than 5.000

More information

Cast Iron Valves. Product Information. It s all at Albion

Cast Iron Valves. Product Information. It s all at Albion Cast Iron Valves Product Information It s all at Albion ART 77-78 Cast Iron Ball Valve Flanged Ends Flange Mounting PN16 Only ISO 5211 Direct Mount (Not 200mm) Art 77/78 Plated Brass/Stainless Ball BS

More information

VALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS

VALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS The S1 model is self-operated bellows sealed pressure excess valve. This series of

More information

VALFONTA SELF-ACTING PRESSURE REDUCING VALVE M1

VALFONTA SELF-ACTING PRESSURE REDUCING VALVE M1 SELF-ACTING PRESSURE REDUCING VALVE M1 M1-15A-ENG PRESSURE REDUCING VALVE MODEL M1 VALFONTA MAIN CHARACTERISTICS The M1 model is self-operated bellows sealed pressure reducing valve. This series of regulators

More information

2/2-way Angle-Seat Valve for medium up to +180 C, threaded port connection, DN 15-65

2/2-way Angle-Seat Valve for medium up to +180 C, threaded port connection, DN 15-65 2/2-way Angle-Seat Valve for medium up to +180 C, threaded port connection, DN 15-65 Type 2000 can be combined with High flow rate Long life cycle NC and NO universal s with modular universal accessory

More information

MULTI-COUPLING PLATES

MULTI-COUPLING PLATES MULTI-COUPLING PLATES MP Series Hydraulic Multi-Coupling Plate Overview - Front end loaders - Harvesting equipment - Construction machinery - Refrigeration - Snow removal equipment - Energy sector - Any

More information

ASEPTIC-0-RING UNIONS Female Union Union Nut Male Union O-Ring Reduced Female Union Reduced Male Union...

ASEPTIC-0-RING UNIONS Female Union Union Nut Male Union O-Ring Reduced Female Union Reduced Male Union... ASEPTIC-0-RING UNIONS Female Union... 68 Union Nut... 69 Male Union... 70 O-Ring... 71 Reduced Female Union... 72 Reduced Male Union... 73 Female Cap... 74 Male Cap... 75 Female Union Female Union Surface

More information

2/2-way Globe Valve for media up to +180 C, DN

2/2-way Globe Valve for media up to +180 C, DN 2/2-way Globe Valve for media up to +180 C, DN 10-100 Compact globe valve version Flange, threaded and welded ports as standard Stainless steel 316L valve body Available with flow direction below and above

More information

3/2-way and 2 x 3/2-way Solenoid Valve for pneumatics

3/2-way and 2 x 3/2-way Solenoid Valve for pneumatics 654 3/-way and x 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Fast response times Space saving ( x 3/-way version) Type 654 can be combined with...

More information

RETURN FILTERS. MATERIALS Head: Aluminium alloy Spin-on cartridge: Steel Bypass valve: Polyammide Seals: NBR Nitrile Indicator housing: Brass

RETURN FILTERS. MATERIALS Head: Aluminium alloy Spin-on cartridge: Steel Bypass valve: Polyammide Seals: NBR Nitrile Indicator housing: Brass COMPONENTS RC MATERIALS Head: Aluminium alloy Spin-on cartridge: Steel Bypass valve: Polyammide Seals: NBR Nitrile Indicator housing: Brass APPLICATION EXAMPLE PRESSURE (ISO 10771-1:2002) Max working:

More information

HIGH PRESSURE - pumps

HIGH PRESSURE - pumps Gear pumps TRAE Positive displacement, external gear pumps intended for hydraulic systems of machines and devices. Material Housing Aluminium Mounting plate Aluminium (groups 1 and 2), cast iron (group

More information

Sempell High Pressure Stop Valves Model VA510 (DIN)

Sempell High Pressure Stop Valves Model VA510 (DIN) Designed for highest pressure and temperature applications using high alloy or stainless steels. Features T-pattern globe type Body made of forged steel Wear resistant stellite body seat Conical seat with

More information

Brass Compression Fitting Range

Brass Compression Fitting Range Compression Fitting Range Fittings Stud Fittings 0105 BSPT Page 5-9 0105 NPT Page 5-9 0101 BSPP/Metric Page 5-10 0101..39 BSPP Page 5-10 0101 Metric Page 5-11 01 BSPP Page 5-11 0109 BSPT Page 5-12 0109

More information

Swivel joints. Product Range

Swivel joints. Product Range Swivel joints Product Range Basic information Hoses are designed to convey all types of media flexibly from A to B. Depending on the formulation, they must withstand very different pressures, media, consistencies

More information

2018 High Performance Check Valves for liquid and gaseous media

2018 High Performance Check Valves for liquid and gaseous media 2018 High Performance Check Valves for liquid and gaseous media Check valves Catalogue 45 Date: 04/2018 WEH - We Engineer Hightech All rights reserved, WEH GmbH 2018. Unauthorized copies are strictly forbidden

More information

SITRANS F flowmeters. SITRANS F O delta p - Primary differential pressure devices Metering pipe with orifice plate and annular chambers 4/369

SITRANS F flowmeters. SITRANS F O delta p - Primary differential pressure devices Metering pipe with orifice plate and annular chambers 4/369 and annular chambers Application Suitable for non-corrosive and corrosive gases, vapors and liquids; permissible operating temperature -10 to +00 C. Design Orifice plate with annular chambers consisting

More information

Pressure reducing valve, direct operated

Pressure reducing valve, direct operated Electric Drives and Controls Table of contents Hydraulics Pressure reducing valve, direct operated Model DR 6 DP Nominal size 6 Series 5X Maximum operating pressure 315 bar (4600 PSI) Maximum flow 60 L/min

More information

Angle Seat Valve 7010

Angle Seat Valve 7010 Angle Seat Valve 7 DN 8 up to DN 8 PN 16 - PN Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. Compact design Unaffected by lightly contaminated

More information

ay Manifold Mounted KHP3K

ay Manifold Mounted KHP3K 3-Way ay Manifold Mounted Ball Valves KHP3K up to 500 bar up to DN 32 1. DESCRIPTION 1.1. GENERAL According to DIN 2429, FLUTEC 3/2-way manifold mounted ball valves are units for shutting off and diverting

More information

Due to changed market conditions and cost changes on a range of products we have to adjust gross prices for the parts affected.

Due to changed market conditions and cost changes on a range of products we have to adjust gross prices for the parts affected. Price changes valid as of April 1 st 2012 Due to changed market conditions and cost changes on a range of products we have to adjust gross prices for the parts affected. Products listed in table Range

More information

Angle Seat Valve 7010

Angle Seat Valve 7010 Angle Seat Valve 7 DN 8 up to DN 8 PN 16 - PN 4 Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. Compact design Unaffected by lightly

More information

2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50

2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50 2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50 Suitable for aggressive media High flow rate value Actuator with adjustable limit switches Visual position indicator Safe

More information

MULTI-K TOP COAT MULTI-COUPLING MULTI COUPLING. Tailor-made according to customer s needs Compact, reliable and safe PATENT PENDING

MULTI-K TOP COAT MULTI-COUPLING MULTI COUPLING. Tailor-made according to customer s needs Compact, reliable and safe PATENT PENDING MULTI-K MULTI-COUPLING TOP COAT 107 PATENT PENDING DN 10 to 19 Tailor-made according to customer s needs Compact, reliable and safe 250 bar General features: ARGUS multi-couplings, which consist of a fixed

More information

3/2 Way Ball Valves KHB3K

3/2 Way Ball Valves KHB3K / Way Ball Valves KHBK Model code (also order example) KHBK G / L 0 X A... Designation KHBK = / way ball valve Type of connection G = Whitworth female thread ISO 8 LR = Pipe connection light range DIN

More information

Fittings Metal Push-To- Connect Fittings. We make things MOVE

Fittings Metal Push-To- Connect Fittings. We make things MOVE Fittings Metal Push-To- Connect Fittings We make things MOVE Contents 3 Fittings 4 Product Features 4 Push-In Fittings 4 Features and Benefits 5 How it Works 5 Materials of Construction 5 Fluid 5 Operating

More information

for plastic tubes CONNECTION > Series 6000 super-rapid fittings GENERAL DATA Fitting with connecting tube Sprint

for plastic tubes CONNECTION > Series 6000 super-rapid fittings GENERAL DATA Fitting with connecting tube Sprint > Series 6000 super-rapid fittings CATALOGUE > Release 8.8 Series 6000 super-rapid fittings for plastic tubes Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3,

More information

2-position electric actuators with Ball valves VBZ ½...11/4

2-position electric actuators with Ball valves VBZ ½...11/4 4 831.2 & VBZ ½...11/4 2-position electric actuators with Ball valves VBZ ½ 11/4 90 angle - Unidirectional rotation VBZ ½ 11/4 Electric rotary actuators for two-port ball valves Operating voltage AC 230

More information

Pressure reducing valve Pressure reducing valve in straightway form DN

Pressure reducing valve Pressure reducing valve in straightway form DN Pressure reducing valve Pressure reducing valve in straightway form DN 15-150 ARI-PREDU Pressure regulating valve, straight through with diaphragm actuator DMA Actuator with rolling diaphragm Grey cast

More information

Technical Data Sheet

Technical Data Sheet Technical Data Sheet Type 52 2/2-way solenoid valve NC - Valve normally closed (as standard) NO - Valve normally open (as option) Direct operated piston design valve. No differential pressure is necessary

More information

Messing. screw-in connectors

Messing. screw-in connectors Messing screw-in connectors 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY Over 30 patents, more than 8,000 standard articles, and 2,000 customized solutions impressively underline

More information

Examples 3/2-way valve A T NO: Symbol

Examples 3/2-way valve A T NO: Symbol 1/1 Hauhinco-3_2-way valve_b1_dn3-25_pn320_pn500_x,y-intern water s 01/2016 3/2-way valve B1 X,Y - DN3 DN25 PN320, PN500 Features: Hydraulically actuated directional seat valve controlling liquid media.

More information

37 flare couplings to ISO

37 flare couplings to ISO Applications Widely used throughout the world, 37 flare couplings are designed for most medium pressure mobile and stationary applications. These couplings are characterized by easy, compact assembly and

More information

Throttle valve type ED, throttle restrictor check valve type RD and RDF

Throttle valve type ED, throttle restrictor check valve type RD and RDF Throttle valve type ED, throttle restrictor check valve type RD and RDF Product documentation Operating pressure pmax: Flow rate Qmax: 500 bar 130 lpm D 7540 11-2014-1.3 by HAWE Hydraulik SE. The forwarding

More information

Uniwat. Resilient Seated Gate Valves

Uniwat. Resilient Seated Gate Valves Uniwat Resilient Seated Gate Valves www.comeval.es Resilent Seated Gate Valves - UNIWAT 504/507 Copyright COMEVAL VALVE SYSTEMS - Data subject to revision - Regularly updated data on www.comeval.es - DS01

More information

Compression Fittings. Brass Compression Fittings. Stainless Steel Compression Fittings. PL Nickel-Plated Brass Spigot Fittings

Compression Fittings. Brass Compression Fittings. Stainless Steel Compression Fittings. PL Nickel-Plated Brass Spigot Fittings Compression Fittings Compression Fittings Stainless Steel Compression Fittings PL Nickel-Plated Spigot Fittings Compression Fittings Compression Fittings Compression Fittings (P. 5-5) Stainless Steel Compression

More information

Check valve type ER and EK

Check valve type ER and EK Check valve type ER and EK Product documentation Plug-in valve Operating pressure pmax: Flow rate Qmax: 700 bar 120 lpm D 7325 05-2015-1.1 by HAWE Hydraulik SE. The forwarding and reproduction of this

More information

SITRANS F flowmeters. SITRANS F O delta p - Primary differential pressure devices. Orifice plate with annular chambers. 4/358 Siemens FI

SITRANS F flowmeters. SITRANS F O delta p - Primary differential pressure devices. Orifice plate with annular chambers. 4/358 Siemens FI Application Dimensional drawings Suitable for non-corrosive and corrosive gases, vapors and liquids; permissible operating temperature -60 to +550 C. Design Two support rings with replaceable orifice disk

More information

BR 20b Ball valve. PFA-lined. Application: Versions:

BR 20b Ball valve. PFA-lined. Application: Versions: PFA-lined BR 20b Ball valve Application: Tight-closing PFA-lined ball valve for (highly) corrosive media, especially with high process demands in chemical plants: Nominal sizes DN 25 to DN 200 Nominal

More information

Type EV224B. Servo-operated 2/2-way solenoid valves for high pressure air. Data sheet

Type EV224B. Servo-operated 2/2-way solenoid valves for high pressure air. Data sheet Data sheet Servo-operated 2/2-way solenoid valves for high air Type EV224B EV224B for compressed air, is a high indirect servo-operated 2/2-way solenoid valve with working up to 40 bar, medium temperature

More information

EO and EO-2 Metric Bite Type Fittings

EO and EO-2 Metric Bite Type Fittings and -2 Metric Bite Type Fittings The Fitting Authority Catalog 4300 Nuts, Sleeves, Locknut, Inserts M FM DPR D PSR Nut Functional Nut Progressive Ring Cutting Ring Progressive Ring F13 F14 F13 F13 F13

More information

Type 431, 433. Balanced bellows design. Type Cap H2. 18 Adjusting screw with bushing. 19 Lock nut. 16 Upper spring plate. 12 Spindle.

Type 431, 433. Balanced bellows design. Type Cap H2. 18 Adjusting screw with bushing. 19 Lock nut. 16 Upper spring plate. 12 Spindle. Balanced bellows design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle 9 Bonnet 54 Spring 14 Split ring 17 Lower spring plate 55 Stud 56 Nut 8 Guide with bushing

More information

3/2-way Solenoid Valve for pneumatics

3/2-way Solenoid Valve for pneumatics 656 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Type 656 can be combined with... Fast response times Type 506 Type 510/511

More information

3/2-way and 2 x 3/2-way Solenoid Valve for pneumatics

3/2-way and 2 x 3/2-way Solenoid Valve for pneumatics 654 3/-way and x 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Fast response times Space saving ( x 3/-way version) Type 654 can be combined with...

More information

05. YY XX. XX. series nominal size

05. YY XX. XX. series nominal size Balflex MicroTest Check Line Hoses, Connectors & Gauges Balflex MicroTest is the range of hoses, couplings and gauges for check lines in hydraulic or refrigeration systems. Balflex MicroTest is produced

More information

Return Line Filter RFM with 4-Hole Mounting

Return Line Filter RFM with 4-Hole Mounting Return Line Filter with 4-Hole Mounting Tank-top mounted versions: up to 850 l/min, up to 10 bar 75 90 150 165 185 195 210 270 330 500 600 661 851 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction

More information

Series 26d Ball Valve

Series 26d Ball Valve Stainless Steel Series 26d Ball Valve Application Tight-closing ball valve made of stainless steel for corrosive media, especially to meet high process requirements in chemical plants: Nominal sizes DN

More information

Servo-operated 2/2-way solenoid valves for high pressure

Servo-operated 2/2-way solenoid valves for high pressure Data sheet Servo-operated 2/2-way solenoid valves for high Type EV224B EV224B for compressed air, is a high indirect servo-operated 2/2-way solenoid valve with working up to 40 bar, medium temperature

More information

ZU series. 100 bar universal cylinder. Determine your 100 bar universal cylinder:

ZU series. 100 bar universal cylinder. Determine your 100 bar universal cylinder: ZU series 100 bar universal cylinder Piston Ø 10-100 mm Lengths of stroke at your option (take account of the bend resistance, see page 35) Standard lengths of stroke Round, compact design; black blued

More information

Excess pressure regulator Excess pressure regulator, straight through DN

Excess pressure regulator Excess pressure regulator, straight through DN ARI-PREDEX Excess pressure regulator Excess pressure regulator, straight through DN 15-150 ARI-PREDEX Excess pressure regulator, straight through with diaphragm actuator UDA Actuator with rolling diaphragm

More information

3/2-Way Valve DN 15 up to DN 40

3/2-Way Valve DN 15 up to DN 40 3/-Way Valve 78 DN up to DN Pneumatically operated 3/-way valve for the control of neutral and slightly aggressive media. (Stainless steel version, Data sheet Type 78) ompact design Unaffected by lightly

More information

Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD USA web:

Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD USA   web: Push-In Fittings LF 3000 LF 3200: 3 mm LIQUIfit LF 300 LF 300/ LF 3900 LF 0 PARKER LEGRIS Industrial Connector Systems Products are available from: MARYLAND METRICS P.O. Box 21 Owings Mills, MD 21117 USA

More information

Plug-in connections M3... M7, G 1/8... G 3/4

Plug-in connections M3... M7, G 1/8... G 3/4 Plug-in connections M3... M7, G 1/8... G 3/4 Nickel-plated brass, Stainless steel, Plastic, POM Straight threaded plug-in connections Basic fittings, short Basic fittings, long Schott-plug-in connections

More information