STANDARD SHAFT SEALS VC

STANDARD SHAFT SEALS VB

STANDARD SHAFT SEALS VB DESCRIPTION The VB profile is a shaft seal composed of a single external metal cage with an internal rubber coating and a primary sealing lip without a spring. ADVANTAGES Good radial

STANDARD SHAFT SEALS SC

STANDARD SHAFT SEALS SC DESCRIPTION The SC profile is a shaft seal composed of a single metal cage with a rubber coating and a primary lip with integrated spring. ADVANTAGES Very good static sealing Very

SHAFT SEALS WITH PTFE COATING TCJ

SHAFT SEALS WITH PTFE COATING TCJ DESCRIPTION The TCJ profile is a shaft seal composed of a single metal cage with a rubber coating, PTFE-coated double sealing lip and integrated spring. ADVANTAGES Very

Operating conditions. Surface roughness R a R max

Merkel U-Ring NI 300 Merkel U-Ring NI 300 Asymmetrical sealing lips PUR profile ring Sealing edge Material Material Code Hardness Polyurethane 94 AU 925 94 Shore A Operating conditions Material 94 AU 925

Merkel Double Wiper PT 2

Merkel Double Wiper PT 2 Merkel Double Wiper PT 2 Material O-rings Profile ring Profile ring Material PTFE bronze compound Code PTFE B602 Fig. 1 Merkel Double Wiper PT 2 O-ring Material Code Hardness Nitrile

DICHTOMATIK Sealing mechanism

DICHTOMATIK Sealing mechanism Static tightness on the outer surface The primary task of the outer surface of the rotary shaft seal is to ensure static tightness in the housing bore, i.e. the passage of

Operating conditions. * Surface roughness of the sliding surface to suit the sealing component used.

Merkel Wiper P 6 Merkel Wiper P 6 Material Wiper lip Material Code Hardness Nitrile rubber NBR 85 NBR B247 85 Shore A Fluoro rubber FKM 85 FKM K664 85 Shore A Operating conditions Fig. 1 Merkel Wiper P

Merkel Compact Seal S 8

Merkel Compact Seal S 8 Merkel Compact Seal S 8 Material Rubber head Fabric part Material Code Hardness Nitrile rubber NBR 70 NBR B209 70 Shore A Operating conditions Fig. 1 Merkel Compact Seal S 8 Product

Merkel U-Ring NI 300. Hydraulics Rod Seals Merkel U-Ring NI 300. Merkel U-Ring NI 300. Material. Operating conditions. Product description

Merkel U-Ring NI 300 Merkel U-Ring NI 300 Asymmetrical sealing lips PUR profile ring Sealing edge Material Material Code Hardness Polyurethane 94 AU 925 94 Shore A Operating conditions Material 94 AU 925

Intermot Hydraulic Motors. Drum Brakes RC Series

Intermot Hydraulic Motors Drum Brakes RC Series TECHNICAL CATALOGUE INDEX General information Pag. 10 Technical data Pag. 14 Dimensional drawings Pag. 15 Ordering instructions Pag. 17 9 Hydraulic fluids

W SERIES TECHNICAL CATALOGUE

WHEEL MOTOR W SERIES TECHNICAL CATALOGUE W 05 INDEX GENERAL INFORMATION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Pag. 2 W 05 G100 (Fixed displacement) (SIZE AND TECHNICAL DATA) -

Merkel U-Ring Seal Set 0216

Merkel U-Ring Seal Set 0216 Merkel U-Ring Seal Set 0216 NBR U-ring Backring Fabric U-ring NBR Cotton fabric Code 80 NBR B246 BI-NBR B4 B248 Back-up ring Fig. 1 Merkel U-Ring Seal Set 0216 Product description

ClaronPolyseal Single Acting Rod Seal PVM & PV

M & Metric tyle and M is a acting rod or piston seal for medium to heavy duty applications. The assembly consists of a male and female header and a series of 'V'. The number of 'V' may be varied to alter

Polon Piston sealing set

The double-acting piston sealing set profile consists of a PTFE piston sealing ring and an elastomer O-Ring as a preloading element. Profile is particularly suitable for double-acting pistons in control

GENERAL INFORMATION HYDRAULIC MOTORS ITALY

GENERAL INFORMATION INTERMOT produces RADIAL PISTON since 1985: our yearly production is more than 13.000 units which we sell all over the world through our agents and authorized sellers. Our motor range

DICHTOMATIK. Bonded Seals US/USS

DICHTOMATIK Bonded Seals US/USS US/USS Bonded seals (US, USS) are metal washers with a trapezoidal elastomer sealing lip vulcanised to their inner diameter. Description Product group Type Sealing material

Polon Rod sealing set

The single-acting rod sealing set profile consists of a PTFE rod sealing ring and an elastomer O-Ring as a preloading element. The asymmetrical cross-section of the slipper ring is designed for best drag

P54 PISTON SEAL TECHNICAL DETAILS. Part Number Structure. Double-Acting F E A T U R E S P54 M R N HLX. Compact piston design.

PISTON SEAL Double-Acting TECHNICAL DETAILS The Hallite P54 is a double-acting, o-ring energized, low-friction piston seal that performs well in both high- and low-pressure systems. High-performance Armorlene

Shaft seals around the clock... around the clock... The structure of a shaft seal is characterised by:

Description Shaft seals are rotary seals. They are used to seal rotating or swivelling machine elements (mainly shafts). The areas of application are diverse and can be found in all areas of mechanical

V-Rings around the clock... around the clock...

Description V-rings are rotary seals that can perform numerous jobs in their function of sealing rotating shafts: sealing against the penetration of dirt, dust, water or watery pollutants, combination

DICHTOMATIK. Rotary seals

Rotary DICHTOMATIK Rotary Albert-chweitzer-Ring 1 D-22045 Hamburg P.O.Box 70 04 80 D-22004 Hamburg Phone +49/40/66 98 90 Fax +49/40/66989101 mail@dichtomatik.de DIN EN IO 9001:2008 Contents Dichtomatik

Description Product group Rod seal

Description Product group Rod seal Design N symmetrical u-ring (05) NI asymmetrical u-ring with inner main sealing lip (07) Profile no. 05/07 Specification E suitable for onesided pressure load Model STI

Ø range <500 mm. Ø range >500 mm. Operating conditions. Surface quality. Surface roughness R a R max

Hyraulics Ro Seals Merkel U-Ring T 20 Merkel U-Ring T 20 Merkel U-Ring T 20 PUR profile ring Material range

Elastomeric Rotary Lip Seals

16 Products Elastomeric Rotary Lip Seals Product Overview One of the most frequently used types of seal is the rotary lip seal, generally used for sealing lubricating oil or grease in rotary shaft applications.

Intermot Hydraulic Motors. Brakes

Intermot Hydraulic Motors Brakes TECHNICAL CATALOGUE INDEX DISK BRAKES Pag. 2 DRUM BRAKES Pag. 9 1 Intermot Hydraulic Motors Disk Brakes F Series TECHNICAL CATALOGUE INDEX F21R F21DR Pag. 3 F80 F80S Pag.

MERKEL P7 Wiper Single-acting rod wiper made from Polyurethane with integrated metal retainer. PUR wiper for axial-accessible housings.

Página 1 de 5 PT 1 MERKEL PT 1 Low Friction Wiper Low friction wiper consisting of one profile ring with a sealing edge and a wiper edge, as well as two O-Rings as pre-load components. A wiper for improvement

KANTSEAL. -Axial sealing - -Elastomers-

KANTSEAL -Axial sealing - -Elastomers- 61 62 n Description The Kantseal is agood alternative to the O Ring as an axial static seal in cases where particular demands are made. The application and handling

UPN. Rod and piston seal with energizing element UPN

Rod and piston seal with energizing element MATERIAL 1 1 Type Polyurethane Designation SEALPUR 93 Hardness 93 ShA 2 2 Type Nitril Rubber NBR Designation RUBSEAL 70 Hardness 70 ShA Pressure 400 bar FIELD

In case the operating parameters are requested at maximum level, these values may not be achieved.

All information contained in our catalogue is released only for general usage and not valid for special applications. Given parameters such as maximum pressure, temperature, sliding speed, surface contact

O-RINGS AND STATIC SEALS

O-RINGS AND STATIC SEALS TECHNICAL PRINCIPLES ISC O-Rings 550 Static Sealing 552 Dynamic Sealing 558 Further Technical Notes 565 PRODUCTS Products 572 Design Types 573 Technical Principles O-Rings and

INTERMOT DUAL DISPLACEMENT MOTORS

INTERMOT DUAL DISPLACEMENT MOTORS IAC SERIES TECHNICAL CATALOGUE INDEX GENERAL INFORMATION Pag. 2 ORDERING INSTRUCTIONS MOTOR TECHNICAL DATA HYDRAULIC FLUIDS RECOMMENDATIONS INSTRUCTIONS AND ADVICES 3

Made of zinc-plated steel (CrVI-free) M3 screw terminal Overpressure safety up to 4,350 psi (300 bar) 1) Male thread

M.3 0166 Diaphragm pressure switches with M3 screw terminal Made of zinc-plated steel (CrVI-free) M3 screw terminal Overpressure safety up to 4,350 psi (300 bar) Adjustment range tolerance at room temperature

Diaphragm pressure switches up to 42 V with brass housing. Brass housing M3 screw terminal Overpressure safety up to 500 psi (35 bar) 1) Male thread

0167 Diaphragm pressure switches with brass housing Brass housing M3 screw terminal Overpressure safety up to 500 psi (35 bar) Adjustment range tolerance at room temperature Male thread NO : NC : 36 Screw

INTERMOT DUAL DISPLACEMENT MOTORS

INTERMOT DUAL DISPLACEMENT MOT IAC SERIES TECHNICAL CATALOGUE INDEX GENERAL INFORMATION Pag. 2 ORDERING INSTRUCTIONS MOTOR TECHNICAL DATA HYDRAULIC FLUIDS RECOMMENDATIONS INSTRUCTIONS AND ADVICES 3 4 7

Turcon RotoGlydRing. Latest information available at Edition August

Turcon RotoGlydRing 241 242 Turcon Roto Glyd Ring n TURCON ROTARY SEALS - ELASTOMER ENERGIZED n Turcon Roto Glyd Ring Description The Turcon Roto Glyd Ring is used to seal rods, shafts, axles, bores, rotary

1/4 BSPP. 500 psi / 35 bar) psi / 35 bar) 8 018X XXX 03 X XXX

0186 / 0187 Diaphragm / piston pressure switches up to 250 V with stainless steel housing M.4 Stainless steel housing (AISI 303 / 1.4305) Snap action with silver contacts Overpressure safety up to 4,350

IAC SERIES TECHNICAL CATALOGUE INDEX 8 DRAIN RECOMMENDATIONS 12 SHAFT SEAL FEATURES 13 FORMULAS CONVERSIONS 14

INTERMOT Italgroup DUAL dual DISPLACEMENT displacement MOTORS motors IAC SERIES TECHNICAL CATALOGUE INDEX GENERAL INFORMATION Pag. 2 ORDERING INSTRUCTIONS MOTOR TECHNICAL DATA HYDRAULIC FLUIDS RECOMMENDATIONS

Rotary shaft seals. Description of standard seal types 6. Additional types 7. Technical data 9. Installation and operation 10.

Description of standard seal types 6 Additional types 7 Technical data 9 Installation and operation 1 Housing bore 12 Lubrication 13 Temperature 14 Pressure 15 Production and Quality assurance 16 Radiaseal

Turcon Glyd Ring. Double Acting Rubber Energized Plastic Faced Seal Material: Turcon, Zurcon and Elastomer

Turcon Glyd Ring Double Acting Rubber Energized Plastic Faced Seal Material: Turcon, Zurcon and Elastomer 15 Turcon Glyd Ring 16 Turcon Glyd Ring Turcon Glyd Ring Description Successfully used for decades,

PS-SEAL PTFE based high-performance seals

Garlock PS-SEAL PTFE based high-performance seals PS-SEAL Contents Introduction and advantages.............. 2 Technical data............................ 3 + 4 PS Standard/PS Non Standard.............

Merkel Sealing Technology for the METALLURGICAL INDUSTRY. Freudenberg Sealing Technologies

Merkel Sealing Technology for the METALLURGICAL INDUSTRY Freudenberg Sealing Technologies 2 Merkel Sealing Technology for the METALLURGICAL INDUSTRY Installation recommendations for sealing systems plus

Hydraulic cylinders type CC - round heads with counterflanges to ISO nominal pressure 25 MPa (250 bar) - max 32 MPa (320 bar)

www.atos.com Table B-/E Hydraulic cylinders type CC - round heads with counterflanges to ISO 60 - nominal pressure MPa (0 bar) - max MPa (0 bar) SWC Cylinders Designer Software for assisted selection of

Merkel Sealing Technology for the Ferrous & Non-Ferrous Processing Industries

Merkel Sealing Technology for the Ferrous & Non-Ferrous Processing Industries Merkel Heavy Industry 2 Merkel Sealing Technology Seals and Sealing Systems for the Ferrous & Non-Ferrous Processing Industries

Low Friction = Reduced Torque Loss

1 Low Friction = Reduced Torque Loss = Improved Vehicle Efficiency Added Benefit from DuPont TM Vespel SP-2515: 2 The low coefficient of friction of Vespel SP-2515 can help designers improve component

RADIAL SHAFT SEALS FOR PROCESS TECHNOLOGY APPLICATIONS

RADIAL SHAFT SEALS FOR PROCESS TECHNOLOGY APPLICATIONS RADIAMATIC HTS II The HTS II is a special PTFE variant of the Simmerring product group. This high-performance radial shaft seal sets standards in

Other materials are available on request. Operating conditions

Merkel U-Ring T 18 Merkel U-Ring T 18 Asymmetrical sealing lip POM back-up ring PUR profile ring Profile ring Coe Harness Polyurethane 95 AU V142 95 Shore A Fig. 1 Merkel U-Ring T 18 Back-up ring Polyacetal

Precision Seals for Pneumatics

Precision Seals for Pneumatics Parker-Prädifa are the result of many years of compound and profile development experience, allowing the pneumatics engineer to pursue new design options and techniques such

Transeals Pty Ltd. Phone 61 (8) Fax 61 (8) Web

Phone 61 (8) 9451 6011 Fax 61 (8) 9458 5766 Web http://www.transeals.com.au Email seals@transeals.com.au ABN 29 008 902 163 1 Atlas Court, Welshpool, Western Australia, 6106 PO Box 15, Welshpool, Western

Merkel PTFE U-rings. for high level applications

Merkel PTFE U-rings for high level applications Product information Merkel PTFE U-rings Simrit, Your Global Technology Specialist for Seals and Vibration Control Simrit, Your Global Technology Specialist

0190 / Tolerance in psi (bar) at room temperature. Adjustment range in psi (bar) psi. ± 2.90 psi. (± 0.2 bar) (0.3-1.

0190 / 0191 Diaphragm / piston pressure switches up to 24 V with gold contacts Zinc-plated steel (CrVI-free), with spade terminal Snap action with gold contacts Overpressure safety up to 1,450 / 4,350

DICHTOMATIK Installation housing

DICHTOMATIK Installation housing Besides the rotary shaft seal, the shaft is a key machine element in the rotation sealing system and must therefore fulfill a number of technical requirements in order

Plug & Seal Fast-fit plug Connections for Housings, Pipe Ends and Assemblies. Product Information Special Sealing Products

Plug & Seal Fast-fit plug Connections for Housings, Pipe Ends and Assemblies Product Information Special Sealing Products Simrit, Your Global Technology Specialist for Seals and Vibration Control Simrit,

Diaphragm/piston pressure switches 250 V

0186/ 0187 Diaphragm/piston pressure switches 250 V www.suco.de Stainless steel (1.4305) body With changeover switch and silver contacts Max. voltage 250 V, overpressure safe to 300/600 bar *) See page

Inline Filters NF. Flow rates up to 3,500 l/min Pressure range 25 bar Material: Aluminium / Aluminium-Cast Iron

NF filters are designed for inline mounting and as tank-top mounted return line filters. These filters can also be used on filling, flushing and off-line units. Inline Filters NF Flow rates up to 3,500

Hydraulic cylinders type CN - round heads with counterflanges to ISO nominal pressure 16 MPa (160 bar) - max 25 MPa (250 bar)

www.atos.com Table B80-/E Hydraulic cylinders type CN - round heads with counterflanges to ISO 600- - nominal pressure 6 MPa (60 bar) - max MPa (0 bar) SWC Cylinders Designer Software for assisted selection

TURCON STEPSEAL 2K. - Single Acting - Rubber Energised Plastic Faced Seal - Material - TurconR and ZurconR - Busak+ Shamban

contents (catalogue) main menu product range fullscreen/variable R R TURCON STEPSEAL 2K - Single Acting - Rubber Energised Plastic Faced Seal - Material - TurconR and ZurconR - 19 20 Turcon R Stepseal

Heavy Duty Wheel Seals and Agricultural Equipment Seals

Heavy Duty Wheel Seals and Agricultural Equipment Seals About TCS Heavy Duty Wheel Seals and Agricultural Equipment Seals Heavy Duty Wheel Seals and Agricultural Equipment Seals can be divided into AP

Hydraulic cylinders type CH - big bore sizes to ISO nominal pressure 16 MPa (160 bar) - max 25 MPa (250 bar)

www.atos.com Table B60-6/ Hydraulic cylinders type CH - big bore sizes to ISO 600- - nominal pressure 6 MPa (60 bar) - max 5 MPa (50 bar) SWC Cylinders Designer Software for assisted selection of Atos

Precision seals for pneumatics

Precision seals for pneumatics Parker Prädifa pneumatic seals are the result of many years of compound and profile development experience, allowing the pneumatics engineer to pursue new design options

Servo-operated 2/2-way solenoid valves Type EV220A

Data sheet Servo-operated 2/2-way solenoid valves Type is a compact servo-operated 2/2-way solenoid valve program, especially designed for use in machines and equipment with limited space. Features and

RB NOK Asymmetrical Profile Rod U-Cup with Double Lip RB asymmetrical C-cup is suited for heavy

RB NOK Asymmetrical Profile Rod U-Cup with Double Lip RB asymmetrical C-cup is suited for heavy duty mobile and stationary service when rod leakage must be kept to a minimum. Double lip design reduces

QUAD-RING R Seal. Description Applications Materials Design Instructions Installation Instructions... 10

QUAD-RING seals Contents Description... 2 Applications... 3 Materials... 4 Characteristics and inspection of elastomers... 4 Design Instructions... 6 Installation Instructions... 10 Installation Recommendations...

Static SealS

Static seals www.hubata-seals.com Static Seals Contents 2 O-rings 3 Dimensions and Tolerances 4 Materials 5 Standard elastomers 7 Special elastomers 9 Installation housings and design recommendations 25

Crossed Roller Slides

Crossed Roller Slides ov-crossed-slides-divider - Updated - 18-09-2017 165 Linear Linear Rail Sets Overview Standard cross roller rail sets L1000 & L1001 Seven rail profiles (Sizes 1-12) Lengts: 20mm to

iglidur G The General Purpose Bearing: most popular iglidur material worldwide

Standards Wide Range from Stock polymer bearings G The General Purpose Bearing: most popular material worldwide from page 51 J The Fast and Slow Motion Specialist: used in long-life applications, also

SKF SEAL JET DD. Machined seals product range

SKF SEAL JET DD Machined seals product range 2 Content A Introduction Machined seals concept... 5 Sealing materials... 6 Introduction... 6 Thermoplastic elastomers - Polyurethanes... 7 Thermoplastic elastomers

POLYPAC - Selemaster SM. Single Acting Compact Rod Seal With Anti-extrusion Ring Material: Rubber + Fabric Reinforced Rubber + POM

Single Acting Compact Rod Seal With Anti-extrusion Ring Material: Rubber + Fabric Reinforced Rubber + POM 85 86 Selemaster SM The rod seal range has been designed to meet the needs of hydraulic equipments

iglidur G The General Purpose Bearing

iglidur The eneral Purpose Bearing Most popular iglidur material worldwide. iglidur bearings cover an extremely wide range of different requirements they are truly all round. Typical applications cover

POLYPAC R WRM/C B+S SA

POLYPAC R WRM/C B+S SA - Single Acting - - With Metal Case - - For open Assembly - -Material- - NBR and Metal - 75 76 Scraper WRM/C - SA Scraper WRM/C - SA Description WRM/C and SA are mould-vulcanised

Pressure Filter for Manifold Mounting DFP and for Reversible Flow DFPF

Pressure Filter for Manifold Mounting DFP and for Reversible Flow DFPF up to 600 l/min, up to 315 bar 60 110 140 160 240 280 330 500 660 1.X 660 2.X 990 1320 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING

Low friction, low wear: The Fast and Slow Motion Specialist iglidur J

Low friction, low wear: The Fast and Slow Motion Specialist iglidur Over 250 sizes available from stock Low wear against different shaft materials Low coefficients of friction running dry Vibration dampening

iglidur J The Fast and Slow Motion Specialist

iglidur The Fast and Slow Motion Specialist Used in long-life applications, also with soft shafts. The iglidur plain bearings are designed for the lowest coefficients of friction while running dry and

Merkel PRW 1 Double Wiper with Integrated Pressure Relieve. Product Information Merkel Hydraulics

Merkel PRW 1 Double Wiper with Integrated Pressure Relieve Product Information Merkel Hydraulics Simrit, Your Global Technology Specialist for Seals and Vibration Control Simrit, Your Global Technology

DMRTM. SHAFT SEALS

TM www.daemar.com SHAFT SEALS For over 30 years Daemar Inc. has remained focused on partnering with our customers to deliver fluid sealing solutions that meet their business challenges. Whether the application

LOW PRESSURE FILTERS RF Series In-tank / Inline Filters 360 psi up to 400 gpm

LOW PRESSURE FILTERS RF Series In-tank / Inline Filters 36 psi up to 4 gpm Hydraulic Symbol A D2 Features RF 3 filters are constructed of polyamide plastic. RF 6-33 filters are constructed of aluminum

NC or NO, maximum operating voltage up to 42 V. Large selection of electrical plug-in types for quick attachment and reliable connection

M.1 Pressure switches hex 24 with integrated connector Large selection of electrical plug-in types for quick attachment and reliable connection High protection class (to IP67 or IP6K9K) Compact and rugged

ZURCON L-CUP. - Single Acting - Innovative Design based on U-Cup - Low Friction Properties - Material - Polyurethane Busak+ Shamban

contents (catalogue) main menu product range fullscreen/variable R ZURCON L-CUP - Single Acting - Innovative Design based on U-Cup - Low Friction Properties - Material - Polyurethane 81 82 Zurcon R L-Cup

Merkel Guide Ring Guivex SBK

Product description Guide rings for piston rods can be used for very heavy loads in hydraulics. The profiling (patented) on the static side of the guide ring ensures an even distribution of stress. Product

Your Partner for Sealing Technology

Your Partner for Sealing Technology Your Partner for Sealing Technology Trelleborg Sealing Solutions is a major international sealing force, uniquely placed to offer dedicated design and development from

Electronic Pressure Switches

96 Pressure Switches Electronic Pressure Switches Electronic Electronic pressure switches, series, Very attractively priced electronic pressure switches, particularly for high volume deployment High overpressure

Pressure Switches 30 A/F

CE Marking Directives of the European Council Machinery Directive EMC Directive Low Voltage Directive Pressure Switches 30 A/F Changeover switch Equipment that falls under these directives must have a

DICHTOMATIK. Hydraulic seals

Titel Hydraulik 2008 GB:Titel 2008 10.09.2008 17:08 Uhr Seite 2 DICHTOMATIK Hydraulic seals DICHTOMATIK Hydraulic seals Albert-Schweitzer-Ring 1 D-22045 Hamburg P.O. Box 70 04 80 D-22004 Hamburg Phone

MEDIUM PRESSURE FILTERS

Medium Pressure Filters 61-2999 psi Low-cost aluminum construction inline filters, provide flexibility for use in both mobile and industrial applications. Durable and light weight, these filters are ideal

Pilot Control Device in Pedal Design for the Remote Control of Directional Valves, Pumps and Motors. Type 2 TH6 R, series 1X RE /05.03.

RE 64 551/05.03 Replaces : 03.00 ilot Control Device in edal Design for the Remote Control of Directional Valves, umps and Motors ype H6 R, series 1X ype H 6 R Features rogressive, sensitive operation

Cylindrical roller bearings

Cylindrical roller bearings Cylindrical roller bearings are manufactured in a various range of constructive types and sizes, particularly single row cylindrical roller bearings but also two or more row

Technical explanations for mechanical pressure switches

Technical explanations for mechanical pressure switches 7 6 5 4 7 5 6 4 Diaphragm pressure switch NO Piston pressure switch NC Change over 3 2a 1 3 2b 10 9 What is a mechanical pressure switch? Mechanical

IAC. Dual displacement hydraulic motors

IAC Dual displacement hydraulic motors The data specified into the catalogue are for product description purpose only and must not be interpreted as warranted characteristics in legal sense. Italgroup

Inline Filter MFM. Flow rates up to 100 l/min Pressure range up to 280 bar Material: EN-GJS / steel E /01.04

Inline Filter MFM Flow rates up to 100 l/min Pressure range up to 280 bar Material: EN-GJS 400-15 / steel 1. TECHNICAL SPECIFICATIONS 1.1. FILTER HOUSING Construction The inline filter consists of a filter

Compact Seal. DUOPAC rubber fabric reinforced compact seals Type DPS and DPC. Busak+ Shamban

DUOPAC rubber fabric reinforced compact seals Type DPS and DPC Description The compact seals DUOPAC DPS and DPC types are double acting piston seals with integrated guide rings. DUOPAC has been designed

Contents. 1 Standard Shaft Seal Types (in accordance with DIN 3760) 2 Technical Data. 3 Installation and operation. 4 Production and Quality Assurance

Rotary shaft seals Contents 1 Standard Shaft Seal Types (in accordance with DIN 376) 2 Technical Data 2.1 Description of rotary shaft seal 2.2 Working Principle 2.3 Metal case 2.4 Garter spring 2.5 Elastomeric

P r e s s u r e i S w i t c h e s V a c u u m i S w i t c h e s PressureiTransmitters

P r e s s u r e i M o n i t o r i n g P r e s s u r e i S w i t c h e s V a c u u m i S w i t c h e s PressureiTransmitters TRADITION AND INNOVATION From a mechanical workshop to an international industrial

SCRAPERS. Busak+ Shamban

SCRAPERS 1 2 Scrapers Contents Choice of Scraper Element... 4 Turcon R Excluder R 2... 7 Turcon R Excluder R 5... 15 Turcon R Excluder R 500... 23 Scraper DA17... 29 Scraper DA22 and RSW... 35 Scraper

Electronic Pressure Switches

96 Pressure Switches Electronic Pressure Switches Electronic E. Electronic pressure switches, series, Very competitively priced electronic pressure switches High overpressure protection (up to x) Small,

0110 / 0112 / 0114 / 0116 / 0118 / 0122

00 / 02 / 04 / 06 / 08 / 022 Diaphragm pressure switches with integrated connector M. Setting ranges to up to 725 psi (50 bar) (higher settings refer to page 26) NC or NO, maximum voltage 42 V Zinc-plated

Excellence in all Dynamics

1 2 Excellence in all Dynamics dy nam ics /dīˈnamiks/ noun 1. The branch of mechanics concerned with the motion of bodies under the action of forces. 2. The forces or properties that stimulate growth,

General information on radial seals

170 General information on radial seals Radial seals is the common name for shaft seals, which seal against a rotating shaft using an elastic and resilient lip of rubber or PTFE. The lip in turn is either

Pressure Filter DF...K P, DF...M P, Flange Mounted

Pressure Filter, DF...M P, Flange Mounted up to 550 l/min, up to 260 bar DF...M P 330...1.X 160 240 280 500...1.X 660...1.X 660...2.X 990...2.X 1320...2.X 660...3.X 990...3.X 1320...3.X 1. TECHNICAL SPECIFICATIONS

DUAL DISPLACEMENT HYDRAULIC MOTOR

R8 C O 2DISPLACEMENT U PL E ITALY DUAL DISPLACEMENT HYDRAULIC MOTOR R8C SERIES TECHNICAL CATALOGUE The data specified into the catalogue are for product description purpose only and must not be interpreted

ISSUE 1/08/14 B E A R I N G S A N D C O M P O N E N T S Contents Company Profile Products Wrapped Bearings Technical Information WMU & WMXMU & WMX Wrapped Bearings Metric Plain U Type Wrapped Bearings

High Pressure Gear Pumps KP 5

High Pressure Gear Pumps KP 5 Construction 1 6 2 9 8 4 5 7 3 1 Housing 2 Gearing 3 Drive shaft end 4 Flange cover 5 Roller bearing 6 Sliding plates 7 Lip-type shaft seal 8 Plain bearing 9 Housing gasket