NC or NO, maximum operating voltage up to 42 V. Large selection of electrical plug-in types for quick attachment and reliable connection
|
|
|
- Tamsin Daniels
- 5 years ago
- Views:
Transcription
1 M.1 Pressure switches hex 24 with integrated connector Large selection of electrical plug-in types for quick attachment and reliable connection High protection class (to IP67 or IP6K9K) Compact and rugged design in industrial environments like construction and agricultural machinery or commercial vehicles Switching point can be set on site with adjusting screw in the connector High overpressure resistance, compact, small switches, available as normally open or normally closed 22 Pressure switches can also be supplied preset at factory. The switching point is embossed onto pressure switches preset at factory.
2 The all-rounder with the broad selection of options DT04-2P with 10 plug-in types Bayonet with 4 codings Coding A1-2.1 Coding A2-2.1 Superseal 1.5 Coding A3-2.1 Coding A4-2.1 Packard MetriPack 280 M for 6 setting ranges bar DT04-3P bar 1 10 bar bar with many thread types bar bar Junior Timer G 1/4 G 1/8 for a broad diversity of applications M12x1 DIN EN M 10 x1 cyl. M 10 x1 con. M 12 x1.5 cyl. NPT 1/8 NPT 1/4 NBR: EPDM: FKM: HNBR: Hydraulic/machine oil, heating oil, air, nitrogen, etc. Brake fluid, hydrogen, oxygen, acetylene, etc. Hydraulic fluids (HFA, HFB, HFD), petrol/gasoline, etc. Hydraulic/machine oil, esterbased bio-oils Silicone: Water, food products (FDA approval) 9/16-18 UNF 7/16-20 UNF 23
3 M.1 Pressure switches hex 24 with integrated connector Technical data 0110/0111 DT04-2P IP67, IP6K9K Rated working voltage: Rated current range (resistive load, 12 DC and 12 AC): Switching power DC12 / AC12: VAC/DC 10 ma 4 A 100 W / 100 VA NBR -40 C +100 C 0112 /0113 Superseal 1.5 IP /0115 Packard MetriPack 280 IP67 Temperature resistance of sealing materials: Switching frequency: Mechanical life expectancy: EPDM -30 C +120 C FKM (in diaphragm pressure switch) FKM (in piston pressure switch) -5 C +120 C -15 C +120 C Silicone -40 C +120 C HNBR -30 C +120 C 200 / min. 1,000,000 cycles (for diaphragm pressure switches, life expectancy value only applies for switching pressures to max. 50 bar) 0116/0117 DT04-3P IP67, IP6K9K Pressure rise rate: 1 bar/ms Hysteresis: Average value 5 30 % depending on type, not adjustable Vibration resistance: 10 g; Hz sine wave, DIN EN Shock resistance: 294 m/s 2 ; 14 ms half sine wave; DIN EN /0119 Junior Timer IP65, IPx4K Protection class: Weight: Up to IP67 / IP6K9K according to the manufacturer's specifications for the respective plug-in system only when plugged in, otherwise IP00 approx. 90 g Contact assignment for bayonet connectors 0120/0121 Bayonet DIN IP67, IP6K9K Coding A1-2.1 Coding A2-2.1 Coding A3-2.1 Coding A / M12x1 DIN EN IP
4 0110 / 0112 / 0114 / 0116 / 0118 / 0122 Diaphragm pressure switches with integrated connector M.1 Setting ranges to up to 50 bar (higher settings refer to page 26) NC or NO, maximum voltage 42 V Zinc-plated steel (Cr VI-free) Overpressure safety up to 300 bar Plug-in types for diaphragm pressure switches DT04-2P 0110 XXX XX X XXX 0110 XXX XX X XXX Superseal XXX XX X XXX 0112 XXX XX X XXX Packard MetriPack XXX XX X XXX 0114 XXX XX X XXX DT04-3P 0116 XXX XX X XXX 0116 XXX XX X XXX Junior Timer 0118 XXX XX X XXX 0118 XXX XX X XXX M12x1 DIN EN D 0122 XXX XX X XXX 0122 XXX XX X XXX Adjustment range tolerance at room temperature Male thread NO : NC : Refer to page 30/31 for height See table for plug-in types page 23 hex 24 Diaphragm pressure switches with integrated connector G 1/4 XXXX X 011 XXXX X G 1/8 XXXX X 603 XXXX X (± 0.2) bar M 10x1 cyl. XXXX X 003 XXXX X 004 M 10x1 con. XXXX X 009 XXXX X 013 M 12x1.5 cyl. XXXX X 010 XXXX X 014 NPT 1/8 XXXX X 012 XXXX X 016 M G 1/4 XXXX X 070 XXXX X 070 G 1/8 XXXX X 070 XXXX X (± 0.3) bar M 10x1 cyl. XXXX X 070 XXXX X 070 M 10x1 con. XXXX X 070 XXXX X 070 M 12x1.5 cyl. XXXX X 070 XXXX X 070 NPT 1/8 XXXX X 070 XXXX X 070 G 1/4 XXXX X 027 XXXX X 031 G 1/8 XXXX X 607 XXXX X (± 0.5) bar M 10x1 cyl. XXXX X 007 XXXX X 008 M 10x1 con. XXXX X 025 XXXX X 029 M 12x1.5 cyl. XXXX X 026 XXXX X 030 NPT 1/8 XXXX X 028 XXXX X 032 Seal material Application areas NBR Hydraulic/machine oil, heating oil, air, nitrogen, etc. 1 EPDM Brake fluid, hydrogen, oxygen, acetylene, etc. 2 FKM Hydraulic fluids (HFA, HFB, HFD), petrol/gasoline, etc. 3 HNBR Hydraulic/machine oil, ester-based bio-oils 9 Refer to page 24 for the temperature range and application thresholds of sealing materials. Your order number: 01XX XXX XX X XXX Static value. Dynamic value is % lower. Values pertain to the hydraulic/pneumatic part of the pressure switch. RoHS II compliant 25
5 M / 0112 / 0114 / 0116 / 0118 / 0122 Diaphragm pressure switches with integrated connector Setting ranges up to 50 bar (lower settings refer to page 25) Zinc-plated steel (Cr VI-free) Overpressure safety up to 300 bar Plug-in types for diaphragm pressure switches DT04-2P 0110 XXX XX X XXX 0110 XXX XX X XXX Refer to page 30/31 for height See table for plug-in types page 23 hex 24 Superseal XXX XX X XXX 0112 XXX XX X XXX Packard MetriPack XXX XX X XXX 0114 XXX XX X XXX DT04-3P (A+B) 0116 XXX XX X XXX 0116 XXX XX X XXX Junior Timer 0118 XXX XX X XXX 0118 XXX XX X XXX M12x1 DIN EN D (1 + 3) 0122 XXX XX X XXX 0122 XXX XX X XXX Adjustment range tolerance at room temperature Male thread NO : NC : Diaphragm pressure switches with integrated connector (± bar (± 2) bar G 1/4 XXXX X 043 XXXX X 047 G 1/8 XXXX X 611 XXXX X 612 M 10x1 cyl. XXXX X 011 XXXX X 012 M 10x1 con. XXXX X 041 XXXX X 045 M 12x1.5 cyl. XXXX X 042 XXXX X 046 NPT 1/8 XXXX X 044 XXXX X 048 G 1/4 XXXX X 059 XXXX X 063 G 1/8 XXXX X 615 XXXX X 616 M 10x1 cyl. XXXX X 015 XXXX X 016 M 10x1 con. XXXX X 057 XXXX X 061 M 12x1.5 cyl. XXXX X 058 XXXX X 062 NPT 1/8 XXXX X 060 XXXX X 064 Seal material Application areas NBR Hydraulic/machine oil, heating oil, air, nitrogen, etc. 1 EPDM Brake fluid, hydrogen, oxygen, acetylene, etc. 2 FKM Hydraulic fluids (HFA, HFB, HFD), petrol/gasoline, etc. 3 HNBR Hydraulic/machine oil, ester-based bio-oils 9 Refer to page 24 for the temperature range and application thresholds of sealing materials. Your order number: 01XX XXX XX X XXX 26 RoHS II compliant Static value. Dynamic value is % lower. Values pertain to the hydraulic/pneumatic part of the pressure switch.
6 0111 / 0113 / 0115 / 0117 / 0119 / 0123 Piston pressure switches with integrated connector M.1 Setting range up to 150 bar Zinc-plated steel (Cr VI-free) Overpressure safety up to 600 bar Plug-in types for piston pressure switches DT04-2P 0111 XXX XX X XXX 0111 XXX XX X XXX Superseal XXX XX X XXX 0113 XXX XX X XXX Packard MetriPack XXX XX X XXX 0115 XXX XX X XXX DT04-3P (A+B) 0117 XXX XX X XXX 0117 XXX XX X XXX Junior Timer 0119 XXX XX X XXX 0119 XXX XX X XXX M12x1 DIN EN D (1 + 3) 0123 XXX XX X XXX 0123 XXX XX X XXX Adjustment range tolerance at room temperature Male thread NO : NC : Refer to page 30/31 for height See table for plug-in types page 23 hex 24 Piston pressure switches with integrated connector G 1/4 XXXX X 011 XXXX X G 1/8 XXXX X 603 XXXX X (± 5) bar M 10x1 cyl. XXXX X 003 XXXX X 004 M 10x1 con. XXXX X 009 XXXX X 013 M 12x1.5 cyl. XXXX X 010 XXXX X 014 M NPT 1/8 XXXX X 012 XXXX X 016 Seal material Application areas NBR Hydraulic/machine oil, heating oil, air, nitrogen, etc. 1 EPDM Brake fluid, hydrogen, oxygen, acetylene, etc. 2 FKM Hydraulic fluids (HFA, HFB, HFD), petrol/gasoline, etc. 3 HNBR Hydraulic/machine oil, ester-based bio-oils 9 Refer to page 24 for the temperature range and application thresholds of sealing materials. Your order number: 01XX XXX XX X XXX Static value. Dynamic value is % lower. Values pertain to the hydraulic/pneumatic part of the pressure switch. RoHS II compliant 27
7 M Diaphragm pressure switches with integrated bayonet connector Zinc-plated steel (Cr VI-free) Overpressure safety up to 300 bar 49 Bayonet ISO (DIN 72585) Adjustment range tolerance at room temperature Male thread NO : 0120 Diaphragm pressure switches with integrated connector (± 0.2) bar NC : G 1/ X03 03 X X04 03 X 015 G 1/ X03 28 X X04 28 X 604 M 10x1 cyl X03 13 X X04 13 X 004 M 10x1 con X03 01 X X04 01 X 013 M 12x1.5 cyl X03 02 X X04 02 X 014 NPT 1/ X03 04 X X04 04 X 016 hex (± 0.3) bar 1 10 (± 0.5) bar G 1/ X23 03 X X24 03 X 070 G 1/ X23 28 X X24 28 X 070 M 10x1 cyl X23 13 X X24 13 X 070 M 10x1 con X23 01 X X24 01 X 070 M 12x1.5 cyl X23 02 X X24 02 X 070 NPT 1/ X23 04 X X24 04 X 070 G 1/ X07 03 X X08 03 X 031 G 1/ X07 28 X X08 28 X 608 M 10x1 cyl X07 13 X X08 13 X 008 M 10x1 con X07 01 X X08 01 X 029 M 12x1.5 cyl X07 02 X X08 02 X 030 NPT 1/ X07 04 X X08 04 X 032 Coding A XX 4XX A XX 3XX A XX 2XX A XX 1XX Seal material Application areas NBR Hydraulic/machine oil, heating oil, air, nitrogen, etc. 1 EPDM Brake fluid, hydrogen, oxygen, acetylene, etc. 2 FKM Hydraulic fluids (HFA, HFB, HFD), petrol/gasoline, etc. 3 HNBR Hydraulic/machine oil, ester-based bio-oils 9 Refer to page 24 for the temperature range and application thresholds of sealing materials. Your order number: 0120 XXX XX X XXX 28 RoHS II compliant Static value. Dynamic value is % lower. Values pertain to the hydraulic/pneumatic part of the pressure switch.
8 0120 / 0121 Diaphragm/piston pressure switches with integrated bayonet M.1 Zinc-plated steel (Cr VI-free) Overpressure safety up to 300 bar for diaphragm variant Overpressure safety up to 600 bar for piston variant Adjustment range tolerance at room temperature Male thread NO : NC : 0120 Diaphragm pressure switches with integrated connector Coding A1-2.1 G 1/ X11 03 X X12 03 X 047 G 1/ X11 28 X X12 28 X (± bar M 10x1 cyl X11 13 X X12 13 X 012 M 10x1 con X11 01 X X12 01 X 045 M 12x1.5 cyl X11 02 X X12 02 X 046 NPT 1/ X11 04 X X12 04 X 048 G 1/ X15 03 X X16 03 X 063 G 1/ X15 28 X X16 28 X 616 Coding A (± 2) bar M 10x1 cyl X15 13 X X16 13 X 016 M 10x1 con X15 01 X X16 01 X 061 M 12x1.5 cyl X15 02 X X16 02 X 062 NPT 1/ X15 04 X X16 04 X 064 M 0121 Piston pressure switches with integrated connector (± 5) bar G 1/ X19 03 X X20 03 X 015 G 1/ X19 28 X X20 28 X 604 M 10x1 cyl X19 13 X X20 13 X 004 M 10x1 con X19 01 X X20 01 X 013 M 12x1.5 cyl X19 02 X X20 02 X 014 NPT 1/ X19 04 X X20 04 X 016 Coding A3-2.1 Coding A XX 4XX A XX 3XX A XX 2XX A XX 1XX Coding A4-2.1 Seal material Application areas NBR Hydraulic/machine oil, heating oil, air, nitrogen, etc. 1 EPDM Brake fluid, hydrogen, oxygen, acetylene, etc. 2 FKM Hydraulic fluids (HFA, HFB, HFD), petrol/gasoline, etc. 3 HNBR Hydraulic/machine oil, ester-based bio-oils 9 Refer to page 24 for the temperature range and application thresholds of sealing materials. Your order number: 012X XXX XX X XXX Static value. Dynamic value is % lower. Values pertain to the hydraulic/pneumatic part of the pressure switch. RoHS II compliant 29
9 M.1 Technical details, contact assignment and accessories for hex 24 pressure switches with integrated connector Mating plug accessories Please note: Mating plugs are not included in the delivery and can be ordered separately. Mating plug type Including 2 m cable DT06-2S (für DT04-2P) - Superseal 1.5 Cable cross-section 2 x 0.5 mm 2 Radox cables 2 x 0.5 mm 2 Radox cables Protection class IP65 IP Plug-in types for hex 24 diaphragm and piston pressure switches Model / type 0110 / / 0113 Connector DT04-2P Superseal 1.5 Protection class IP67, IP6K9K IP67 Overall height H 61 mm H 61 mm Contact assignment
10 Packard MetriPack 280 DT06-3S (für DT04-3P) Junior Timer Bayonet DIN / ISO A1-2.1 M12x1 DIN EN LF 2 x 0.5 mm 2 Radox cables 2 x 0.5 mm 2 PUR-cables 2 x 0.5 mm 2 Radox cables 2 x 0.5 mm 2 Radox cables 4 x 0.34 mm 2 PUR-cables IP65 IP67 IP65 IP65 IP M 0114 / / / / / 0123 Packard MetriPack 280 DT04-3P Junior Timer Bayonet DIN 72585/ISO M12x1 DIN EN IP67 IP67, IP6K9K IP65, IPx4K IP67, IP6K9K IP67 H 62 mm H 63 mm H 54 mm H 49 mm H 51 mm A B A B Coding: A (blue) 1 (brown) 31
0110 / 0112 / 0114 / 0116 / 0118 / 0122
00 / 02 / 04 / 06 / 08 / 022 Diaphragm pressure switches with integrated connector M. Setting ranges to up to 725 psi (50 bar) (higher settings refer to page 26) NC or NO, maximum voltage 42 V Zinc-plated
Made of zinc-plated steel (CrVI-free) M3 screw terminal Overpressure safety up to 4,350 psi (300 bar) 1) Male thread
M.3 0166 Diaphragm pressure switches with M3 screw terminal Made of zinc-plated steel (CrVI-free) M3 screw terminal Overpressure safety up to 4,350 psi (300 bar) Adjustment range tolerance at room temperature
Diaphragm pressure switches up to 42 V with brass housing. Brass housing M3 screw terminal Overpressure safety up to 500 psi (35 bar) 1) Male thread
0167 Diaphragm pressure switches with brass housing Brass housing M3 screw terminal Overpressure safety up to 500 psi (35 bar) Adjustment range tolerance at room temperature Male thread NO : NC : 36 Screw
0190 / Tolerance in psi (bar) at room temperature. Adjustment range in psi (bar) psi. ± 2.90 psi. (± 0.2 bar) (0.3-1.
0190 / 0191 Diaphragm / piston pressure switches up to 24 V with gold contacts Zinc-plated steel (CrVI-free), with spade terminal Snap action with gold contacts Overpressure safety up to 1,450 / 4,350
1/4 BSPP. 500 psi / 35 bar) psi / 35 bar) 8 018X XXX 03 X XXX
0186 / 0187 Diaphragm / piston pressure switches up to 250 V with stainless steel housing M.4 Stainless steel housing (AISI 303 / 1.4305) Snap action with silver contacts Overpressure safety up to 4,350
Electronic Pressure Switches
96 Pressure Switches Electronic Pressure Switches Electronic Electronic pressure switches, series, Very attractively priced electronic pressure switches, particularly for high volume deployment High overpressure
Pressure switches hex 24
Pressure switches Normally open or normally closed, maximum voltage 42 V Low-cost solution for mechanical pressure monitoring. Stable switching point even after long use and high load. Switching point
PRESSURE MONITORING.
MONITORING PRESSURE MONITORING PRESSURE Pressure-control systems overview Technical explanations From page 8 Selection matrix Support for selection of suitable pressure switch Page 10 Pressure switches
Electronic Pressure Switches
96 Pressure Switches Electronic Pressure Switches Electronic E. Electronic pressure switches, series, Very competitively priced electronic pressure switches High overpressure protection (up to x) Small,
Adjustment range. Seal material. Pressure connection
0520 Order matrix for electronic pressure switches.3 Type Adjustment range Pressure connection Seal material lectrical connection Type lectronic pressure switch 0520 Adjustment range 1) for NO 0 145 psi
Technical explanations for mechanical pressure switches
Technical explanations for mechanical pressure switches 7 6 5 4 7 5 6 4 Diaphragm pressure switch NO Piston pressure switch NC Change over 3 2a 1 3 2b 10 9 What is a mechanical pressure switch? Mechanical
Pressure switch hex 27
Pressure switch Changeover switch with silver or gold contacts Easily adjustable switching point. Factory adjustable hysteresis (except type 0140/014. High overpressure safety and long life even under
SUCO Pressure Monitoring
SUCO Pressure Monitoring Catalogue Pressure Monitoring Edition 05 Mechanical Pressure Switches Electronic Pressure Switches Pressure Transmitters Sensor Technology PM7_Cover_Print.indd.0.5 5:6 Product
Seal material. Pressure range. Pressure connection -40 F +212 F 1 -4 F +257 F 3
0675 / 0680 / 0690 Order matrix for pressure transmitters in Oil-Filled Housing ype Pressure range Pressure connection Seal material Electrical connection 0.5 4.5 V, ratiometric 0675 0 10 V, -wire 0680
P r e s s u r e i S w i t c h e s V a c u u m i S w i t c h e s PressureiTransmitters
P r e s s u r e i M o n i t o r i n g P r e s s u r e i S w i t c h e s V a c u u m i S w i t c h e s PressureiTransmitters TRADITION AND INNOVATION From a mechanical workshop to an international industrial
Explosion-Protected Pressure Switches
Explosion-Protected Pressure Switches To new ATEX Standard TECHNICAL DATA 0165 0340 0341 Degree of protection: IP 65 ATEX protection zone: 1 22 22 Switching power: 1 A / 250 VAC 0.25 A / 250 VDC 2 A /
Pressure Switches 30 A/F
CE Marking Directives of the European Council Machinery Directive EMC Directive Low Voltage Directive Pressure Switches 30 A/F Changeover switch Equipment that falls under these directives must have a
Diaphragm/piston pressure switches 250 V
0186/ 0187 Diaphragm/piston pressure switches 250 V www.suco.de Stainless steel (1.4305) body With changeover switch and silver contacts Max. voltage 250 V, overpressure safe to 300/600 bar *) See page
Technical explanations for mechanical pressure switches
Technical explanations for mechanical pressure switches 7 6 5 4 7 5 6 4 Diaphragm pressure switch NO Piston pressure switch NC Change over 3 2a 1 3 2b 10 9 What is a mechanical pressure switch? Mechanical
P r e s s u r e i S w i t c h e s V a c u u m i S w i t c h e s PressureiTransmitters
P r e s s u r e i M o n i t o r i n g P r e s s u r e i S w i t c h e s V a c u u m i S w i t c h e s PressureiTransmitters TRADITION AND INNOVATION From a mechanical workshop to an international industrial
Electronic Pressure Switches
96 Pressure Switches Electronic Pressure Switches Electronic E.5 switching output Electronic pressure switches, High-Performance series with one switching output Outstanding overpressure protection (up
M. Mechanical Pressure Switches. Mechanical Pressure Switches
M. Mechanical Pressure Switches Mechanical Pressure Switches M. 10 M.6 PS PLUS hex 24 Pressure switches PLUS with integrated connector and supplementary functions Hex 24, NC or NO, voltage up to 42 V Intelligent,
M. Mechanical Pressure Mechanical Pressure Switches Switches
10 M. Mechanical Pressure Mechanical Pressure Switches Switches M.4 Pressure switches Changeover with silver or gold contacts Switching point can be adjusted when fitted on site Factory adjustable hysteresis
Electronic Pressure Switches
96 Pressure Switches Electronic Pressure Switches Electronic E.6 2 switching outputs Electronic pressure switches, High-Performance series with two switching outputs Outstanding overpressure protection
Electronic Pressure Switches E.
E. Electronic Pressure Switches Electronic Pressure Switches E. 96 97 E E. Overview of electronic pressure switches Technical explanations Electronic pressure from page 100 Selection matrix A guide to
Pressure switches 30 A/F
Pressure switches Attachment options for wall fitting and block style enable clearly structured, accessible, easy-maintenance installation Switching pressure can be adjusted easily by user High overpressure
Pressure Transmitters
Transmitters Wetted parts are all made of stainless steel for high resistance to chemicals Stainless steel diaphragm welded with casing No seals and thus low leakage rate even with difficult gases High
PRESSURE TRANSDUCERS. Specifications. Individual Specifications
00 Series and 00 Heavy Duty Series Compact OEM Pressure Transmitters 0 50 psi to 0-0,000 psi ranges (0-.5 bar to 0-,00 bar) High Proof Pressures Broad Choice of Outputs RoHS Compliant For OEMs that need
PRESSURE TRANSDUCERS. Specifications. Individual Specifications
GEMS COMPLIANT 00 Series and 00 Heavy Duty Series Compact OEM Pressure Transmitters 0 00 psi to 0-0,000 psi ranges (0- bar to 0-,00 bar) High Proof Pressures Broad Choice of Outputs RoHS Compliant For
Screw-in RTD temperature probes with plug connector
Data sheet 902040 Page 1/6 s with plug connector Temperature range from -50 to +270 C Shakeproof design Application areas: utility vehicles, construction and agricultural machinery, motors, compressors
Industrial Pressure Transmitters
Industrial Pressure Transmitters Type S-10, S-11 Applications Hydraulics and pneumatics Test equipment Pump and compressor control Liquid level measurement Special Features Standard ranges available from
DMP 333. Industrial Pressure Transmitter For High Pressure. Stainless Steel Sensor
DMP Industrial Pressure Transmitter For High Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO Nominal pressure from 0... 00 bar up to 0... 600
JUMO MIDAS Pressure transmitter
Phone: +44 19 635533 Fax: +44 19 6356 Data Sheet 401001 Page 1/5 JUMO MIDAS Pressure transmitter Brief description Pressure transmitters are used for measuring the relative (gauge) pressure in liquids
DMP 331. Industrial Pressure Transmitter for Low Pressure. Stainless Steel Sensor
DMP Industrial Pressure Transmitter for Low Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO Nominal pressure from 0... 00 mbar up to 0... 40
DMP 331 DMP 331. Industrial Pressure Transmitter for Low Pressure. Stainless Steel Sensor. Pressure Transmitter. Industrial
TEMATEC GmbH Postal address: House address Fon (+49) 0 4-870-0 Postbox 6 Löhestr. 7 Fax (+49) 0 4-870-0 http: // www.tematec.de 5759 Hennef 577 Hennef e-mail: team@tematec.de TEMATEC GmbH Data Sheet DMP
Technical Data Measuring principle Thin-film-on-steel Media temperature -40 C C
Electronic Pressure Switch Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of pressure and temperature. The Electronic Pressure
2/2 Pressure operated valves
Operation Series Page no. Function 2/2 3/2 Body material Stainless steel Brass Solenoids IP Protection class IP65 (with connector) Explosion proof class Zones 1, 21 II 2 GD EEx m IP67 II 2 G EEx me IP54
2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm
2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm Lockable manual override as standard For liquid, gaseous and aggressive media Long service life, even in non-lube conditions
Indirect servo-operated 2/2-way solenoid valves Type EV220W 10 - EV220W 50, NBR and EPDM versions
Data sheet Indirect servo-operated 2/2-way solenoid valves Type EV220W 10 - EV220W 50, NBR and EPDM versions EV220W is a range of compact indirect servo- operated 2/2 way solenoid valves with connections
TABLE OF CONTENTS PRESSURE SPA... 4 SWA... 6 SMA... 8 SDCA...10 SKBA...12 SKDA...14 SPAL...16 SLF...18 SPAH...20 DIFFERENTIAL DSPA...22 VACUUM SVA...24 SPVL...26 TEMPERATURE S1TAF...28 S2TAF...30 TRANSDUCER
Electronic Pressure Switch EDS 3000
Description: The EDS 3000 is a compact, electronic pressure switch with integral digital display. The unit can have one or two switching outputs, and there is the option of an additional analogue output
OEM Pressure transmitter for industrial applications Type MBS Technical brochure
OEM Pressure transmitter for industrial applications Type MBS 1200 Technical brochure Features Designed for use in severe industrial OEM applications For medium and ambient temperatures up to 125ºC All
DMP 333. Industrial Pressure Transmitter For High Pressure DRUCK & TEMPERATUR LEITENBERGER GMBH. Stainless Steel Sensor
DRUCK & TEMPERATUR LEITENBERGER GMBH DMP Industrial Pressure Transmitter For High Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO Nominal pressure
Pressure transmitter for general applications Model S-10, standard version Model S-11, flush diaphragm
Electronic Pressure Measurement Pressure transmitter for general applications Model, standard version Model S-11, flush diaphragm WIKA Data Sheet PE 81.01 Applications n Mechanical engineering n Hydraulics
Servo-operated 2/2-way solenoid valves Type EV220A
Data sheet Servo-operated 2/2-way solenoid valves Type is a compact servo-operated 2/2-way solenoid valve program, especially designed for use in machines and equipment with limited space. Features and
Pressure transmitters for heavy duty applications MBS 8200 and MBS 8250
Data sheet Pressure transmitters for heavy duty applications MBS 8200 and MBS 8250 MBS 8200 is a series of compact pressure transmitters developed to withstand the pressure pulsations and vibrations known
EPI Applications. Features
EPI 887 Industrial Pressure Transmitter Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of pressure and temperature. The industrial
Series RE-10. Valve terminals > Technical details. Order code RE-10/**-***-*** Temperature range Medium +5 C C
Technical details Temperature range Medium + C... +0 C Filtered, oil-free and dried compressed air according to ISO 8-:00, Class ::, instrument air, free of aggressive additives. Alternatively the pressure
Pressure transmitters for heavy-duty applications MBS 2000 and MBS 2050
Data sheet Pressure transmitters for heavy-duty applications MBS 2000 and MBS 2050 The compact heavy duty pressure transmitters MBS 2000 and MBS 2050 are designed for use in hydraulic applications. MBS
2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm
/ or 3/-way Solenoid Valve, with pivoted armature and isolating diaphragm Type 0330 can be combined with Lockable manual override as standard For liquid, gaseous and aggressive media Long service life,
Honeywell Pressure Switches. Datasheet. High Pressure: HP Series, HE Series Factory set 150 psi to 4500 psi [10,34 bar to 310,26 bar]
![Honeywell Pressure Switches. Datasheet. High Pressure: HP Series, HE Series Factory set 150 psi to 4500 psi [10,34 bar to 310,26 bar]](/thumbs/74/70006730.jpg "Honeywell Pressure Switches. Datasheet. High Pressure: HP Series, HE Series Factory set 150 psi to 4500 psi [10,34 bar to 310,26 bar]")
oneywell Switches igh : P Series, E Series actory set 150 psi to 4500 psi [10,34 bar to 310,26 bar] Low : LP Series, LE Series actory set or field adjustable 3.5 psi to 150 psi [0,24 bar to 10,34 bar]
MBS 1200 and MBS 1250
Data sheet OEM Pressure Transmitters for heavy-duty applications MBS 1200 and MBS 1250 The compact OEM pressure transmitter programme is designed for use in severe hydraulic applications. The programme
Electronic Temperature Sensor ETS 300
Description: The ETS 300 is a compact electronic temperature sensor with digital display. Two different models are available for optimum adaptation to particular applications. The ETS 300 with built-in
Polon Piston sealing set
The double-acting piston sealing set profile consists of a PTFE piston sealing ring and an elastomer O-Ring as a preloading element. Profile is particularly suitable for double-acting pistons in control
2/2 Solenoid Cartridge Valve, Size 10
2/2 Solenoid Cartridge Valve, Size 1 Q max = 8 l/min, p max = 3 bar Seat-valve shut-off, two-stage, monitored operating position 1 Description With integral electronic monitoring of operating position
Normalde Kapalı kontakt
Normalde Kapalı kontakt Use Mineral oils-fuels-water Fixing Aluminum Anodized 1"Gas P31100-100 Stem Brass P31-100 Float Foamed nylon P31200-100 Seeger Phosphorous bronze P31250-100 O-Ring NBR P31-100 Electrical
Proportional solenoid valve for pneumatic application V PR M
Proportional solenoid valve for pneumatic application 3 Product group V PR M Function / NC Proportional direct-acting Armature space pressure tight up to 16 bar static pressure High linearity Quick response
OEM Pressure Transmitters for heavy-duty applications Type MBS 1200 and MBS 1250
Data sheet OEM Pressure Transmitters for heavy-duty applications Type MBS 100 and MBS 150 The compact OEM pressure transmitter programme is designed for use in severe hydraulic applications. The programme
Temperature sensor Type MBT 3270
Data sheet Temperature sensor Type MBT 3270 The flexible temperature sensor MBT 3270 can be used in many industrial applications such as: Air Compressors, Mobile Hydraulics and Exhaust gas return systems.
Temperature Sensor MBT Technical brochure
Temperature Sensor MBT 3270 Technical brochure Features OEM Temperature Sensor program Various sensor elements available (RTD, NTC, PTC) Robust, high protection against moisture Fixed measuring insert
AST44LP Intrinsically Safe Low Pressure Transducers / Transmitters
AST44LP Intrinsically Safe Low Transducers / Transmitters Class I Division 1 Groups C, D IS with Approved Barrier OVERVIEW The AST44LP is a stainless steel pressure transducer with a wide variety of options.
ECT Applications. Features
Industrial Pressure Transmitter Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of pressure and temperature. The economical pressure
High temperature pressure transmitters for heavy-duty applications MBS 2200 and MBS 2250
Data sheet High temperature pressure transmitters for heavy-duty applications MBS 2200 and MBS 2250 The compact heavy duty pressure transmitter type MBS 2200 and MBS 2250 are designed for use in severe
DCT 533. Industrial Pressure Transmitter with IO-Link Interface. Stainless Steel Sensor
DCT 5 Industrial Pressure Transmitter with IO-Link Interface Stainless Steel Sensor accuracy according to IEC 60770: standart: ± 0.5 % FSO sption: ± 0.5 % FSO Nominal pressure from 0... 00 mbar up to 0...
Data Sheet P4055 Pressure Transducer
Data Sheet P4055 Pressure Transducer Main Features Pressure Ranges Electrical Connection Pressure Connection Housing Material Output Signal 0 to 3 up to 0 to 300 PSI Packard Electric Metri-Pack 150 Series
M5200 Industrial Pressure Transducer
SPECIFICATIONS Wide Temperature Range Compact Variety of Pressure Ports and Electrical Configurations Optional Stainless Steel Snubber CE Compliant and Weatherproof Gage, Sealed, Compound The pressure
Proportional Flow-Control Cartridges, Size 5
Proportional Flow-Control Cartridges, Size Q max = l/min, p max = bar, Q N = l/min at p bar Leak free, load compensated, two stage Description Series MVRPLSA two-stage proportional flow-control cartridges
Pressure. Pressure. Mechanical. Press. Switches
Pressure Pressure Mechanical Press. Switches Contents Mechanical Pressure Switches 4 Introduction 4 Metal Diaphragm 6 Bourdon Tube 7 Compact 8 Diaphragm Seal Piston Summary Mechanical Pressure Switches
DMP 331. Industrial Pressure Transmitter for Low Pressure DRUCK & TEMPERATUR LEITENBERGER GMBH. Stainless Steel Sensor
DRUCK & TEMPERATUR LEITENBERGER GMBH DMP Industrial Pressure Transmitter for Low Pressure Stainless Steel Sensor accuracy according to IEC 60770: : 0.5 % FSO option: 0.5 / 0. % FSO Nominal pressure from
Temperature Sensor MBT 3270
Data Sheet Temperature Sensor MBT 327 Features Integrated plug OEM Temperature Sensor program Versions with integrated plug or cable available Various sensor elements available (RTD,, PTC) Robust, high
Solenoid valve Types EV220B 15 - EV220B 50
Data sheet Solenoid valve Types EV220B 15 - EV220B 50 EV220B 15 EV220B 50 is a universal indirect servo-opera ted 2/2-way solenoid valve program. Valve body in brass, dezincification resistant brass and
Pressure transducer DMU 01K Compact version
Pressure transducer DMU 01K Compact version Dimensions (in mm) Wiring diagram 8 Application Special OEM unit. For electronic pressure measurement in industrial or HVAC applications (such as hydraulic,
Pressure measurement PP20H Fully welded hygienic pressure sensor with flush membrane
Product highlights All market typical hygienic connections available EHEDG & 3-A certified versions available Condensate-proof measuring cell IO-Link available Space-saving installations from DN 25 on
Mechanical Pressure Switches. Catalogue. Mechanical Pressure Switches. Control. Overview. every move
Mechanical Pressure Switches Catalogue Mechanical Pressure Switches Overview Control every move Content Content Overview 4 Introduction 4 Metal Diaphragm 6 Bourdon Tube 7 Compact 8 Diaphragm Seal Piston
SUCO Product Overview
SUCO Product Overview Pressure Monitoring & an overview www.suco-tech.com Pressure Switches with integrated connectors NO / NC / Changeover IP67 (up to IP6K9K) Robust, compact design Various connector
Rotary Sensor potentiometric Heavy-duty. Series IPX-7900
Rotary Sensor potentiometric Heavy-duty Series IPX-7900 Special features exceptionally durable design for extreme environmental conditions absolute potentiometric measuring system angle ranges 120, 200
Pressure Switches. Pressure switches, pneumatic. Pressure switches, electronic
Contents Description Page Pressure switches, pneumatic, with plug 50 Pressure switches, pneumatic, with flat pins 51 Pressure switches, pneumatic 52 55 with internal thread with flange connection Pressure
DMK 331P. Industrial Pressure Transmitter. Pressure Ports With Flush Welded Stainless Steel Diaphragm
Industrial Pressure Transmitter Pressure Ports With Flush Welded Stainless Steel Diaphragm accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 60 bar up to 0... 400 bar Output signals
DMK 331P. Industrial Pressure Transmitter. Pressure Ports With Flush Welded Stainless Steel Diaphragm. accuracy according to IEC 60770: 0.
DMK P Industrial Pressure Transmitter Pressure Ports With Flush Welded Stainless Steel Diaphragm accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 60 bar up to 0... 400 bar Output signals
SUCO Product Overview
SUCO Product Overview Pressure Monitoring & an overview Mechanical Pressure Switches Electronic Pressure Sensors www.suco.de Mechanical Pressure Switches Pressure Switches with integrated connectors NO
2/2-way Solenoid Valve for liquids and gases
2/2-way Solenoid Valve for liquids and gases Type 6213EV can be combined with... Coupled spring diaphragm system opened without differential pressure Waterhammer free and low noise HP00 version with increased
PSG5xx ATM to Medium Vacuum Gauge
The INFICON Standard Gauges,,, PSG510- S and, employ the most advanced digital technology available in themarketplace. The rugged stainless steel sensor cell and compact design qualifythem for use on semiconductor
Direct-acting 2/2- or 3/2-way pivoted armature valve
0330 Direct-acting 2/2- or 3/2-way pivoted armature valve Direct-acting, media-separated valve with diameter of up to DN 5 Maintenance-free pivoted armature technology Vibration-proof, block screwed coil
DMK 331P DMK 331P. Industrial Pressure Transmitter. Pressure Ports With Flush Welded Stainless Steel Diaphragm. Pressure Transmitter.
TEMATEC GmbH Postal address:: Postbox 6 House address Löhestr. 7 5759 Hennef 577 Hennef Fon (+49) 0 4-87 0-0 Fax (+49) 0 4-87 0-0 http: // www.tematec.de e-mail: team@ tematec.de TEMATEC GmbH Data Sheet
Function. Orifice (mm) NBR (Perbunan) 0 EPDM 1 FKM (Viton) 2 FFKM (Kalrez) / O-ring FKM 4
Working from 0 bar up Short switching times Suited for fine vacuum down to 1,33 10-3 mbar Assembled oil and grease-free For a.c. solenoid systems with integrated rectifier (40 to 60 Hz) These solenoid
Relative and absolute pressure transmitter type 528
Relative and absolute pressure transmitter type 528 Pressure range -1... 0 60 bar The compact type 528 pressure transmitter is based upon the well proven ceramic technology developed by Huba Control over
CONTINENTAL HYDRAULICS VED03MX
CONTINENTAL HYDRAULICS VED03MX HIGH PERFORMANCE, SERVO-PROPORTIONAL DIRECTIONAL CONTROL VALVE 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM VED03MX HIGH
Solid State Electronic Pressure Switch with Integral LED Display Model PSD-10
Solid State Electronic Pressure Switch with Integral LED Display Model PSD-10 Electronic Pressure Measurement WIKA Datasheet PSD-10 Applications Hydraulics and pneumatics Filter monitoring Pump control
JUMO MIDAS S05 Pressure transmitter Type
Data Sheet 40.00 Page /8 JUMO MIDAS S05 Pressure transmitter Type 4000 Brief description The JUMO MIDAS S05 pressure transmitter is available with both relative pressure and absolute pressure measurement
FPT Applications. Features
FPT 85 Flush Membrane Transmitter Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of and temperature. The Flush Membrane Transmitter
2/2- and 3/2-way solenoid valve for aggressive fluids
2/2- and 3/2-way solenoid valve for aggressive fluids Type 0121 can be combined with Direct-acting, media-separated valve with diameter of up to DN 8 Maintenance-free pivoted armature technology Vibration-proof,
PROPORTIONAL VALVES. G1/4, G3/8 and G1/2 tapped body or subbase mounted body with digital pressure control
PROPORTIONAL VALVES Sentronic LP G1/4, G3/8 and G1/2 tapped body or subbase mounted body with digital pressure control 3 ports Series 617 FEATURES Sentronic LP stands for: Low power consumption (3,8 W)
P500 Pressure Sensor. Description. Features. Applications MAIN FEATURES
P500 Pressure Sensor Description The P500 incorporates Kavlico s 4th generation ceramic capacitive sense element with the latest state of the art proprietary ASIC. Available in brass or stainless steel
Temposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors
Temposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors MH-Series Model MB Mobile Hydraulic Sensor with Analog Output Data Sheet SENSORS Document Part Number 551284 Revision A MH-Series
DMP 331P DMP 331P. Industrial Pressure Transmitter. Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm
DMP P Industrial Pressure Transmitter Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO Industrial
Electronic pressure switch with integrated analogue output
Electronic pressure switch with integrated analogue output RE 30276/03.1 Replaces: 03.06 RE 30275 1/6 Type HEDE 10 /1/ Component series 2X tb0002 Table of contents Contents Page Features 1 Ordering code
Temposonics. Absolute, Non-Contact Position Sensors. MH Series. Temposonics MB Analog. Technical Data / Description
Temposonics Absolute, Non-Contact Position Sensors MH Series Technical Data / Description Document No. 551220 Revision E Compact Sensor for Mobile Hydraulics Linear, absolute Measurement in Hydraulic Cylinders
3/2-way Solenoid Valve for pneumatics
656 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Type 656 can be combined with... Fast response times Type 506 Type 510/511
Information 3 Form A 4 Industrial Form Type B 12 Form B 16 Form C 18 Micro Type C 22
TABLE OF CONTENTS Connectors Information 3 Form A 4 Industrial Form Type B 12 Form B 16 Form C 18 Micro Type C 22 Function Fittings Information 26 Flow Controls 27 Pilot Operated Check Valves 28 Pressure
Solenoid valve Types EV220B 15 - EV220B 50
Solenoid valve Types EV220B 15 - EV220B 50 EV220B 15 EV220B 50 is a universal indirect servo-opera ted 2/2-way solenoid valve program. Valve body in brass, dezincification resistant brass and stainless