AIR FILTERS AND FILLER BREATHERS FA3 / FB1 / FB2 / FT series ACCESSORIES HYDRAULIC SYMBOL
|
|
|
- Brett Lucas Cook
- 6 years ago
- Views:
Transcription
1 ACCESSORIES AIR FILTERS AND FILLER BREATHERS FA3 / FB1 / FB2 / FT series The air breather filters are integral part of the filtration within the hydraulic system, as they retain the environment contamination that could enter into the reservoir with the air sucked due to the oil level fluctuations during the system operation. Our wide range of air filter and filler breathers offers the suitable solution to various requirements. HYDRAULIC SYMBOL ( FA3 / FB2 / FT5 / FT8 ( FB1 / FT6 / FT7
2 AIR FILTERS AND FILLER BREATHERS FA-3 SERIES Flange mounted with spin-on element TECHNICAL INFORMATION MATERIALS: FILTER MEDIA: Canister: painted steel Flange and basket: zinc plated steel Gaskets: NBR Cellulose (air filtration 3 µm) Glassfiber (air filtration 1 µm) WORKING TEMPERATURE: FLUID COMPATIBILITY: (acc. to ISO 2943) C (-13 F +212 F) Mineral oil, vegetable oil, synthetic oil. For use with other fluids(in particular HFA-HFC-HFD/R -HPG) please contact the FILTREC Customer Service (info@filtrec.it). ORDERING INFORMATION Filter assembly FA3 Filter element A3 20 C03 20 C03 WE base assembly, without spin-on See table --- C03 G01 FILTER MEDIA cellulose (air filtr. 3 µm) glassfiber (air filtr.1 µm) 2
3 OVERALL DIMENSIONS TANK MOUNTING PATTERN (DIN 24557/2) Air flow rate l/min SPIN-ON CODE D1 H1 p 0,015 barg ELEMENT C03 G01 FA A FA A311 FA A FA A321 3
4 FILTRI ARIA FB1 SERIES Air breather filtes, with replaceable filter element TECHNICAL INFORMATION MATERIALS: FILTER MEDIA: WORKING TEMPERATURE: FLUID COMPATIBILITY: (acc. to ISO 2943) Cover: painted steel Cellulose (air filtration 3 µm) C (-13 F +212 F) Mineral oil, vegetable oil, synthetic oil. For use with other fluids(in particular HFA-HFC-HFD/R -HPG) please contact the FILTREC Customer Service (info@filtrec.it). Filter assembly FB1 Filter element B1 ORDERING INFORMATION 10 C10 10 C10 B2 10 cover Ø cover Ø cover Ø 108 C10 FILTER MEDIA cellulose (air filtration 3 µm) B1 B2 B3 B4 B5 CONNECTION 1/4 BSP 3/8 BSP 1/2 BSP 3/4 BSP 1 BSP OVERALL DIMENSIONS CODE A H1 H2 H3 H4 L1 M Air flow rate l/min p 0,015 barg FB110 1/4-3/8 BSP / FB120 1/2-3/4 BSP FB130 1 BSP
5 AIR FILTERS FT6 & FT7 SERIES Air breather filters TECHNICAL INFORMATION MATERIALS FILTER MEDIA: PRESSURIZATION VALVE: WORKING TEMPERATURE: FLUID COMPATIBILITY: (acc. to ISO 2943) Cover: chrome plated steel Threaded connection: zinc plated steel Polyurethane (air filtration 3 µm and 10 µm) 0,35 or 0,75 bar (for FT7 only, when available) C (-13 F +212 F) Mineral oil, vegetable oil, synthetic oil. For use with other fluids(in particular HFA-HFC-HFD/R -HPG) please contact the FILTREC Customer Service (info@filtrec.it). ORDERING INFORMATION FT 7 F03 B4 1 6 cover Ø48 7 cover Ø75 F03 F10 FILTER MEDIA polyurethane (air filtration 3 µm) polyurethane (air filtration 10 µm) B1 B2 B3 B4 CONNECTION 1/4 BSP 3/8 BSP 1/2 BSP 3/4 BSP OVERALL DIMENSIONS PRESSURIZATION VALVE 0 no valve 1 0,35 bar / 5 psi 2 0,75 bar / 10,8 psi L1 H2 H1 M A CODE A H1 H2 L1 M Air flow rate l/min p 0,015 barg FT6...B1 1/4 BSP FT6...B2 3/8 BSP 27 FT7...B3 1/2 BSP 27 35, FT7...B4 3/4 BSP 32 F03 F10 5
6 AIR FILTERS AND FILLER BREATHERS FB2 SERIES, with replaceable filter element TECHNICAL INFORMATION MATERIALS: Housing: polyammide PA Basket: polyammide PA Gaskets: NBR FILTER MEDIA: WORKING TEMPERATURE: FLUID COMPATIBILITY: (acc. to ISO 2943) Cellulose (air filtration 3 µm) Glassfiber (air filtration 1µm) C (-13 F +212 F) Mineral oil, vegetable oil, synthetic oil. For use with other fluids(in particular HFA-HFC-HFD/R -HPG) please contact the FILTREC Customer Service (info@filtrec.it). ORDERING INFORMATION FB2 50 D2 C length 1 51 length 2 MOUNTING TYPE D2 flange, DIN 24557/2 FILTER MEDIA 000 without element C10 cellulose (air filtration 3 µm) G10 glassfiber (air filtration 1 µm) OPTIONS 000 w ithout options 6
7 OVERALL DIMENSIONS Ø H1 M5 TANK MOUNTING PATTERN (DIN 24557/2) Ø55 Ø73 MODEL H1 Air flow rate l/min Dp 0,015 barg C10 G10 FB FB
8 FILLER BREATHERS FT SERIES Filler breathers with flange or welding mounting TECHNICAL INFORMATION MATERIALS: Cover: chrome plated steel Basket: zinc plated steel Flange: zinc plated steel Gaskets: NBR FILTER MEDIA: Polyurethane (air filtration 3µm e10 µm) The plugs are linked to the mounting flange with a safety chain (except versions T13, S10 and W10). PRESSURIZATION VALVE: WORKING TEMPERATURE: FLUID COMPATIBILITY: (acc. to ISO 2943) 0,35 or 0,75 bar (for FT8 only, when available) C (-13 F +212 F) Mineral oil, vegetable oil, synthetic oil. For use with other fluids(in particular HFA-HFC-HFD/R -HPG) please contact the FILTREC Customer Service (info@filtrec.it). ORDERING INFORMATION FT 8 F03 B S08 0 L 5 cover Ø48 8 cover Ø75 F03 F10 FILTER MEDIA polyurethane (air filtration 3 µm) polyurethane (air filtration 10 µm) B GASKETS NBR MOUNTING TYPE --- FT5 only S08 flange, basket h = 80 mm S15 flange, basket h = 150 mm S10 flange, removable basket W10 welding flange T13 with antisplash tube *for FT-8 only, see page 10 PRESSURIZATION VALVE 0 no valve *1 0,35 bar / 5 psi *2 0,75 bar / 10,8 psi PADLOCK HOLDER 0 without padlock holder * for FT-8 only, see page 10 *L with padlock holder 8
9 FLANGED MOUNTING OVERALL DIMENSIONS FT5 FT8 S08 - FT8 S15 FT8 S10 TANK MOUNTING PATTERN (DIN 24557/2) TANK MOUNTING PATTERN (DIN 24557/2) CODE B1 D1 H1 H2 L1 L2 L3 Air flow rate l/min Dp 0,015 barg FT , FT8 S FT8 S FT8 S F03 F
10 WELDING MOUNTING OVERALL DIMENSIONS FT8 W10 FT8 T13 L1 L2 L2 H3 H2 H2 H1 H1 L3 L3 L1 HOLE ON THE TANK HOLE ON THE TANK D1 D1 CODE D1 H1 H2 H3 L1 L2 L3 Air flow rate l/min Dp 0,015 barg FT8 W FT8 T F03 F10 OPTIONS PRESSURIZATION VALVE PADLOCK HOLDER On request, FT7 and FT8 can be supplied with some option: PRESSURIZATION VALVE PADLOCK HOLDER (FT8 only) 10
11
12 CT71-rev.03-01/18 w w w. f i l t r e c. c o m Technical data subject to change without prior notice.
Filtrec elements are tested according to ISO 2941, ISO 2942 and ISO 23181
Common HYDRAULIC FILTRATION Side wall mounting suction filters Technical Information Connection Ports: 1-1 1/4-1 1/2 BSP (other thread options on request) 1 1/2 SAE J518-3000/M12 Housing Materials: Cover:
Connection Ports: 3/4 1 1/4 BSP (other thread options on request)
HYDRAULIC FILTRATION Medium pressure, in line spin-on filters Technical Information Pressure: Max working (acc. to NFPA T 3.10.17): FA-4-1x: 34,5 bar (500 psi) FA-4-21: 24 bar (348 psi) Burst (acc. to
By-pass: 1,7 bar (24.6 psi) setting N.B. Cartridge with integrated bypass valve and antidrainback membrane
HYDRAULIC FILTRATION Spin-on, tank top return filters Technical Information Pressure: Max working 12 bar (175 psi) (acc. to NFPA T 3.10.17) Burst 20 bar (290 psi) (acc. to NFPA T 3.10.17) Connection Ports:
Pressure: Max working 8 bar (116 psi) (acc. to NFPA T ) Burst 16 bar (232 psi) (acc. to NFPA T )
HYDRAULIC FILTRATION Tank top return filters Technical Information Pressure: Max working 8 bar (116 psi) (acc. to NFPA T 3.1..1) Burst 16 bar (232 psi) (acc. to NFPA T 3.1..1) Housing Connection Ports:
Pressure: Max working 8 bar (116 psi) (acc. to NFPA T ) Burst 16 bar (232 psi) (acc. to NFPA T ) Buna-N (FKM on request)
HYDRAULIC FILTRATION Return filters, tank top mounting, inside-to-outside filtration Technical Information Pressure: Max working 8 bar (116 psi) (acc. to NFPA T 3.10.5.1) Burst 16 bar (232 psi) (acc. to
Connection Ports: 1/2 1 1/2 BSP (other thread options on request) aluminium alloy NBR (FKM on request)
HYDRAULIC FILTRATION In line medium pressure filters Technical Information Pressure: Max working (acc. to NFPA T 3.1.5.1): F1-XD4/63/1: 1 bar (15 psi) F1-XD16/25/4: 8 bar (12 psi) Housing Burst (acc. to
Pressure: Max working 280 bar (4000 psi) (acc. to NFPA T ) Burst 840 bar (12200 psi) (acc. to NFPA T )
HYDRAULIC FILTRATION In line medium pressure filters Technical Information Pressure: Max working 280 bar (4000 psi) (acc. to NFPA T 3.10.5.1) Burst 840 bar (12200 psi) (acc. to NFPA T 3.10.5.1) Housing
OIL FILLER AND AIR BREATHER FILLER CAPS
OIL FILLER ND IR RETHER FILLER CPS The complete series of oil filter and makes it possible to meet all market demands. Metal and plastic styles suitable for use on mobile equipment are available. s perform
Pressure: Max working F280 D12x port size 1/2 & 3/4 : 420 bar (6000 psi) Burst F280 D12x port size 1/2 & 3/4 : 1260 bar (18000 psi)
HYDRAULIC FILTRATION F8-D1 series In line medium pressure filters Technical Information Housing Pressure: Max working F8 D1x port size 1/ & 3/4 : 4 bar (6 psi) F8 D1x port size 1 : 3 bar (4 psi) F8 D14x:
Connection Ports: 3/4 1 1/4 BSP (other thread options on request) aluminium alloy NBR (FKM on request)
HYDRAULIC FILTRATION F4-DMD series In line medium pressure filters Technical Information Pressure: Max working (acc. to NFPA T 3.1..1): F4-DMD/8/11: 7 bar (11 psi) F4-DMD1/3/4: 4 bar (8 psi) Housing Burst
Pressure: Max working 110 bar (1600 psi) (acc. to NFPA T ) Burst 330 bar (4800 psi) (acc. to NFPA T ) Wire mesh µm
HYDRAULIC FILTRATION In line medium pressure filters Technical Information Pressure: Max working 110 bar (1600 psi) (acc. to NFPA T 3.10.5.1) Burst 330 bar (4800 psi) (acc. to NFPA T 3.10.5.1) Housing
Pressure: Max working 420 bar (6000 psi) (acc. to NFPA T ) Burst 1260 bar (18300 psi) (acc. to NFPA T )
HYDRULIC FILTRTION In line high pressure filters Technical Information Pressure: Max working 420 bar (6000 psi) (acc. to NFP T 3.10.5.1) Burst 1260 bar (18300 psi) (acc. to NFP T 3.10.5.1) Housing Connection
Pressure: Max working 160 bar (2300 psi) (acc. to NFPA T ) Burst 480 bar (6900 psi) (acc. to NFPA T )
HYDRULIC FILTRTION F16-XD series In line medium pressure filters Technical Information Pressure: Max working 16 bar (3 psi) (acc. to NFP T 3.1..1) Burst 48 bar (69 psi) (acc. to NFP T 3.1..1) Housing Connection
Pressure: Max working F280 D12x port size 1/2 & 3/4 : 420 bar (6000 psi) Burst F280 D12x port size 1/2 & 3/4 : 1260 bar (18000 psi)
HYDRULIC FILTRTION In line medium pressure filters Technical Information Housing Pressure: Max working F8 D1x port size 1/ & 3/4 : 4 bar (6 psi) F8 D1x port size 1 : 3 bar (4 psi) F8 D14x: 3 bar (4 psi)
Filtrec elements are tested also according to ISO 2942, ISO and ISO 3968
HYDULIC FILTTION F-1 series Spin-on filters Technical Information Pressure: Max working 12 bar (175 psi) (acc. to NFP T 3.10.17) Burst 20 bar (290 psi) (acc. to NFP T 3.10.17) Connection Ports: 3/4 1 1/2
SPIN-ON FILTER - LOW PRESSURE LINE
SERIES MSH SPIN-ON FILTER - LOW PRESSURE LINE Maximum working pressure 5 psi Flow rate to 8 GPM D e s c r i p t i o n MSH working pressure of 5 psi, with a peak pressure This filter MSH series utilises
Reservoir oil filler/breather
Reservoir oil filler/breather RE 50070/10.05 Replaces: 01.03 1/10 Types ELF, BF and BL R 7802_2 Reservoir oil filler/breather with sieve type ELF 3... H_S_95 Reservoir breather type BF 7...K... Overview
D e s c r i p t i o n
D e s c r i p t i o n 250 The SF2 series suction filter are designed for reservoir side-wall applications. This completely new design of filter allows the filter within the filter preventing oil loss from
Breathers. BF...3 & BF...4 Series INNOVATIVE FLUID POWER. ø D1 HEX. Specifications. Hydraulic Symbols. Model Code. Dimensions BF P 3 G 10 W 1.0 /.
BF...3 & BF...4 Series Maximum flow rate - 31 scfm / 230 gpm at 0.04 bar Epoxy coated steel cap Zinc-plated internals Threaded connection Pressurized breather with relief valve (optional - BF3 only) Phenolic
Return fi lters. FRI series. Maximum pressure up to 20 bar - Flow rate up to 1500 l/min. Return fi lters
Return fi lters series Maximum pressure up to bar - Flow rate up to 15 l/min 193 Return fi lters GENERAL INFORMATION Technical data Return filter Maximum pressure up to bar - Flow rate up to 15 l/min Filter
Return Line Filter RF
Return Line Filter up to 15000 l/min, up to 25 bar 30 60 110 160 240 330 450 580 660 950 1300 2500 4000 5200 6500-7800 15000 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The filter housings
MB SERIES SMB SERIES MINIATURE TANK BREATHERS MINIATURE TANK BREATHERS ACCCESSORIES. Phone (608) Fax (608)
G1 MB SERIES MINIATURE TANK BREATHERS 10 Micron Filtration (Nominal) Shatter Resistant Plastic Construction Temperatures Up to +225 F Model A B Number Thread Size Overall Height MB-02-10 1/4 NPT 1.8 MB-03-10
CUSTOM CLAMPS. Head Bolt Arrangements. Model Code B3-5 A1 B1 A1HB B1HB S1 HRSGBLPU 30 A1 373 ST
Head Bolt Arrangements CUSTOM CLAMPS A1 B1 A1HB B1HB S1 Parts Legend 1 Hex Head Bolt 2 Socket Head Bolt 3 Steel Band 4 Band Profile 5 Swivel Sleeve 6 Hex Head Nut 7 H-Bolt 8 Locking Sleeve Series HRGBLPU
A complete line of pressure differential visual and electrical indicators are available with this series of filters.
D e s c r i p t i o n FHB series filters are designed for pressure line applications where manifold mounting is a specific requirement. The manifold type filters are designed to integrate onto manifold
Return Line Filter RF
HYDAC return line filters type RF are designed to be mounted directly on tank tops. Inline mounting is also possible. Return Line Filter RF Flow rates up to 5, l/min Pressure range up to 25 bar Material:
OVERVIEW OF RESERVOIR ACCESSORIES
OVERVIEW OF RESERVOIR ACCESSORIES Reservoir Accessories The reservoir of a hydraulic system can be a significant source of contamination. At the same time, the reservoir is an ideal location for correcting
MPS/MST SERIES SPIN - ON FILTER SUCTION - RETURN. Maximum working pressure 12 bar. Flow rates to 300 l/min
MPS/MST SERIES SPIN - ON FILTER SUCTION - RETURN Maximum working pressure 12 bar Flow rates to 3 l/min D e s c r i p t i o n MPS/MST The spin-on filter series is a complete product range suitable, for
Low Pressure Filters. Low Pressure Filters LOW PRESSURE FILTERS
Low Pressure Filters Low pressure filters are the most common type of filter found in hydraulic circuits used most often in return line applications. Low Pressure Filters Donaldson low pressure filters
Breathers and Filler Breathers
Breathers and Filler Breathers E 7.411.1/03.12 109 Your Professional Partner for Breathers and Filler Breathers. HYDAC Quality. HYDAC filtration technology is the culmination of rigorous laboratory testing
Examples 3/2-way valve A T NO: Symbol
1/1 Hauhinco-3_2-way valve_b1_dn3-25_pn320_pn500_x,y-intern water s 01/2016 3/2-way valve B1 X,Y - DN3 DN25 PN320, PN500 Features: Hydraulically actuated directional seat valve controlling liquid media.
SERIES SF2-250 SUCTION FILTER. Flow rate to 45 gpm
SERIES SF2-250 SUCTION FILTER Flow rate to 45 gpm D e s c r i p t i o n 250 The SF2 series suction filter are designed for reservoir side-wall applications. This completely new design of filter allows
RETURN FILTERS. MATERIALS Head: Aluminium alloy Spin-on cartridge: Steel Bypass valve: Polyammide Seals: NBR Nitrile Indicator housing: Brass
COMPONENTS RC MATERIALS Head: Aluminium alloy Spin-on cartridge: Steel Bypass valve: Polyammide Seals: NBR Nitrile Indicator housing: Brass APPLICATION EXAMPLE PRESSURE (ISO 10771-1:2002) Max working:
Stauff Hydraulic Accessories
Hydraulic & Offshore Supplies Stauff Hydraulic Accessories YOUR GATEWAY TO GLOBAL SUPPLY HOSE ASSEMBLIES PRESSURE TESTING WALFORM EQUIPMENT PACKAGES FLANGES PIPE & TUBE Contents STAUFF Hydraulic Accessories
RETURN FILTERS. MATERIALS Head: Aluminium alloy Cover & bowl: Polyammide Bypass valve: Polyammide Seals: NBR Nitrile Indicator housing: Brass
COMPONENTS RB MATERIALS Head: Aluminium alloy Cover & bowl: Polyammide Bypass valve: Polyammide Seals: NBR Nitrile Indicator housing: Brass APPLICATION EXAMPLE PRESSURE (ISO 10771-1:2) Max working: 0 kpa
Threaded Adapters for Creating Tank Breathers. Element Attachment. Thread. O-Ring (Buna-N) Aluminum Construction. Male Pipe.
Reservoir Breathers Breathers are available in a variety of styles, materials and sizes. Breathers provide clean airflow into reservoirs and other storage containers where there is an exchange of air during
FILTERS. Accessories. CFA - Filling plugs. CBA-CBB - Air breathers. CSF - Filling plugs with threaded air filter. CLA - Visual level indicators
ccessories F - Filling plugs B-BB - ir breathers SF - Filling plugs with threaded air filter L - Visual level indicators IR SENTRY - ir dry filters breathers F FILLING BRETHERS Filling plugs with inbuilt
LOW PRESSURE FILTERS RF Series In-tank / Inline Filters 360 psi up to 400 gpm
LOW PRESSURE FILTERS RF Series In-tank / Inline Filters 36 psi up to 4 gpm Hydraulic Symbol A D2 Features RF 3 filters are constructed of polyamide plastic. RF 6-33 filters are constructed of aluminum
OUT. The SF2 series suction filter are designed for reservoir side-wall applications. This completely new design of filter allows the filter
D e s c r i p t i o n 250 The SF2 series suction filter are designed for reservoir side-wall applications. This completely new design of filter allows the filter within the filter preventing oil loss from
Duplex Filter Pi Features. Nominal pressure 10/16 bar (140/230 psi), nominal size 1250 up to 8000
Duplex Filter Pi 281 Nominal pressure / bar (140/230 psi), nominal size 1 up to 8000 1. Features _ High performance filters for modern hydraulic systems Modular system Compact design Minimal pressure drop
Change-Over Pressure Filter DFDK
Change-Over Pressure Filter up to 2500 l/min, up to 315 bar 30 60 110 140 160 240 280 330 500 660 1.x 660 2.x 990 2.x 1320 2.x 1320 3.x 2640 3.x 3960 3.x 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING
Flow rates to 3000 l/min
MPH Maximum pressure bar Flow rates to l/min echnical data housing (Materials) Head: luminium: MPH nodised luminium: MPH 68 Painted luminium: MPH 66 Cover: Nylon: MPH luminium: MPH nodised luminium: MPH
Pressure reducing valve, direct operated
Pressure reducing valve, direct operated RE 657/5. Replaces:.3 /8 Type ZDR Size 6 Component series 4X Maximum operating pressure bar Maximum flow 5 l/min H775 Table of contents Contents Page Features Ordering
Pressure reducing valve, direct operated
Pressure reducing valve, direct operated RE 68/0. Replaces: 06.03 /8 Type ZDR Size 0 Component series X Maximum operating pressure 0 bar Maximum flow 80 l/min H77 Table of contents Contents Page Features
Pressure reducing valve, direct operated. Type ZDR. Contents. Features. RE Edition: Replaces:
Pressure reducing valve, direct operated Type ZDR RE 657 Edition: 8-3 Replaces: 8- Size 6 Component series 4X Maximum operating pressure 35 bar Maximum flow 5 l/min H775 Features Sandwich plate valve Porting
Inline Filter DMG DMG 080 DMG 045 DMG FILTER SPECIFICATIONS. Temperature range -10 C to +100 C Material of filter housing
Inline Filter Flow direction from in to out up to 250 l/min, up to 120 bar 020 045 080 150 250 1. TCHNICAL SPCIFICATIONS 1.1 FILTR HOUSING Design The filter housings are designed in accordance with international
Pressure relief valve, pilot-operated. Type ZDB and Z2DB. Contents. Features. RE Edition: Replaces: 10.05
Pressure relief valve, pilot-operated Type ZDB and ZDB RE 575 Edition: 06- Replaces: 0.05 Size 6 Component series 4X Maximum operating pressure 35 bar Maximum flow 60 l/min H7746 Features Sandwich plate
RF2 Maximum pressure 20 bar F l o w r a t e s t o l / m i n
RF2 96 Maximum pressure 20 bar F l o w r a t e s t o 4 5 5 l / m i n Filter housing (Materials) Filter body: luminium over: Nylon Valve: Nylon - Steel nti-emptying valve: Steel Pressure Working pressure:
Fluid Cooling Industrial COLW Series
Fluid Cooling Industrial COLW Series 0916 COPPER & STEEL CONSTRUCTION Performance Notes Ideal for independent cooling and filtering of system oils Utilizes a high efficient EK series shell & tube (finned
Pressure Filter DF...K P, DF...M P, Flange Mounted
Pressure Filter, DF...M P, Flange Mounted up to 550 l/min, up to 260 bar DF...M P 330...1.X 160 240 280 500...1.X 660...1.X 660...2.X 990...2.X 1320...2.X 660...3.X 990...3.X 1320...3.X 1. TECHNICAL SPECIFICATIONS
Pressure Filter DF Pressure Filter for Reversible Oil Flow DFF/DFFX
Pressure Filter DF Pressure Filter for Reversible Oil Flow DFF/DFFX up to 2000 l/min, up to 420 bar DF/DFF...1.X/2.X 30 60 110 140 160 240 280 330 500 660 990 1320 1500 2000 3000 4000 DF...3.X DFFX...1.X/2.X
HIGH PRESSURE FILTERS
HIGH PRESSURE FILTERS Series DF & LF Pressures to 6 PSI Flows to 18 GPM APPLICATION HYDAC DF & LF In-line High Pressure Filters are designed for use on hydraulic power units, machine tools, plastics machinery,
SERIES SF2-500 SUCTION FILTER. Flow rates to 225 gpm
SERIES SF2-5 SUTION FILTER Flow rates to 225 gpm D e s c r i p t i o n 5 The SF2 series are designed for reservoir side-wall mounting applications, suitable for flow rates to 225 gpm and filtration from
Pressure Filter for Manifold Mounting DFP and for Reversible Flow DFPF
Pressure Filter for Manifold Mounting DFP and for Reversible Flow DFPF up to 600 l/min, up to 315 bar 60 110 140 160 240 280 330 500 660 1.X 660 2.X 990 1320 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING
MPH Maximum pressure 10 bar F l o w r a t e s t o l / m i n
MPH Maximum pressure bar F l o w r a t e s t o l / m i n 6 echnical data housing (Materials) Head: luminium: MPH ---- nodised luminium: MPH 6-8 Painted luminium: MPH 66 Cover: Nylon: MPH --- luminium:
Level indicators, screw plugs
Level indicators, screw plugs 885 Product overview Level indicators, screw plugs Oil level gauges K0443 Plastic plugs K0452 Oil level gauges K0444 Page 888 Aluminium plugs K0453 Page 894 Oil level sight
DSH* /117 ED LEVER OPERATED DIRECTIONAL CONTROL VALVE MOUNTING SURFACES DSH3 ISO DSH5 ISO
41 600/117 ED DSH* LEVER OPERATED DIRECTIONAL CONTROL VALVE MOUNTING SURFACES DSH3 ISO 4401-03 DSH5 ISO 4401-05 p max (see performances table) Q nom (see performances table) OPERATING PRINCIPLE The DSH
MPH Maximum pressure 10 bar F l o w r a t e s t o l / m i n
MPH Maximum pressure bar F l o w r a t e s t o l / m i n 6 echnical data Filter housing (Materials) Head: luminium: MPH ---- nodised luminium: MPH 6-8 Painted luminium: MPH 66 Cover: Nylon: MPH --- luminium:
Pressure relief valve, pilot-operated. Type ZDB and Z2DB. Contents. Features. RE Edition: Replaces: 05.11
Pressure relief valve, pilot-operated Type ZDB and ZDB RE 576 Edition: 06- Replaces: 05. Size 0 Component series 4X Maximum operating pressure 35bar [4600 psi] Maximum flow 00 l/min [6.4 US gpm] H7747
Pressure reducing valve, direct operated
Pressure reducing valve, direct operated RE 26564/5.11 Replaces: 2.3 1/8 Type DR 6 DP Size 6 Component series 5X Maximum operating pressure 315 bar [4568 psi] Maximum flow 6 l/min [15.9 US gpm] H7743 Table
Return Line Filter RFM with 4-Hole Mounting
Return Line Filter with 4-Hole Mounting Tank-top mounted versions: up to 850 l/min, up to 10 bar 75 90 150 165 185 210 270 330 500 600 661 851 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING Construction
Inline Filter MFM. Flow rates up to 100 l/min Pressure range up to 280 bar Material: EN-GJS / steel E /01.04
Inline Filter MFM Flow rates up to 100 l/min Pressure range up to 280 bar Material: EN-GJS 400-15 / steel 1. TECHNICAL SPECIFICATIONS 1.1. FILTER HOUSING Construction The inline filter consists of a filter
Suction Filter SF/SFM/SFF and Suction Filter Elements S/S..
Suction Filter /M/F and Suction Filter Elements S/S.. up to 500 l/min Filters: 60 110 160 240 330 M 330 F 400 F 500 Elements: S SH. SU. SG. 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The
3/2-way Solenoid Valve for pneumatics
656 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Type 656 can be combined with... Fast response times Type 506 Type 510/511
Series RFLD Duplex In-Line Filter
APPLICATION Series RFLD Duplex In-Line Filter Welded Pressures to 230 psi Flows to 3900 gpm HYDAC RFLD in-line filters are designed for in-line mounting and are mainly used in continuously operating systems.
Check valve. Type S. Contents. Features. RE Edition: Replaces:
Check valve Type S RE Edition: - Replaces: - Sizes Maximum operating pressure bar Maximum flow l/min R8_ Features For threaded connection (screw-in thread) Leakage-free blocking in one direction Various
D e s c r i p t i o n
e s c r i p t i o n MPH and MPI series filters are designed for returnline applications and provide various installation applications. The filters are installed semiimmersed (MPH) or totally immersed into
Return Line Filter RFM with 4-Hole Mounting
Return Line Filter with 4-Hole Mounting Tank-top mounted versions: up to 850 l/min, up to 10 bar 75 90 150 165 185 195 210 270 330 500 600 661 851 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction
Inline Filters NF. Flow rates up to 3,500 l/min Pressure range 25 bar Material: Aluminium / Aluminium-Cast Iron
NF filters are designed for inline mounting and as tank-top mounted return line filters. These filters can also be used on filling, flushing and off-line units. Inline Filters NF Flow rates up to 3,500
Filter. Rücklauffilter 3-Loch Serie HF 502. Bestellnr. Innengewinde G. Code. Typ. (ohne Filterelement)
Filter Bestellnr. (ohne Filterelement) Typ Innengewinde G Code Rücklauffilter 3-Loch Serie HF 52 3-4- HF52-.6-GD-B-H-Z-XD-DA /2 HHRK62 3-4-5 HF52-2.77-GD-B-H-Z-XD-DA /2 HHRK22 3-4- HF52-2.77-GE-B-H-Z-XD-DA
Filter. Spin-on Filter. Spin-on Filterelement Serie HF 620. Innengewinde. Bestellnr. (ohne Filterelement) Code. Typ
Filter Bestellnr. (ohne Filterelement) Typ Innengewinde G Code Spin-on Filter Serie HF 62 3-2-1 HF62.2-B-GE-XA-DA-XB-DA HHT384 3-2-15 HF62.2-B2-GE-XA-DA-XB-DA 3/4 HHT3163 3-2-11 HF62.2-B17-GE-XA-DA-XB-DA
Inline filters NF NF 1350 NF 330 NF 750 NF 500 NF FILTER SPECIFICATIONS Nominal pressure
Inline filters up to 3500 l/min, up to 25 bar 160 240 280 330 500 750 950 1350 2650 on request 1310 2.x on request 2610 2.x 1340 2640 5240 7840 10440 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction
Pressure relief valve, direct operated. Type DBD..K. Contents. Features. RE Edition:
Pressure relief valve, direct operated Type DBD..K RE 25715 Edition: 2015-06 Size 2 Component series 2X Maximum operating pressure 420 bar Maximum flow 2 l/min H8070 Features Screw-in cartridge valve 6
CONTINENTAL HYDRAULICS VAD05M-VMD05M - AIR & LEVER OPERATED DIRECTIONAL VALVES
CONTINENTAL HYDRAULICS VAD05M-VMD05M AIR & LEVER OPERTAED DIRECTIONAL VALVES 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM VAD05M-VMD05M AIR & LEVER OPERATED
WESTERN FILTER. High Performance Filtration Systems. Spin-ons Intank Low Pressure Medium Pressure High Pressure Duplex
WESTERN FILTER High Performance Filtration Systems Spin-ons Intank Low Pressure Medium Pressure High Pressure Duplex www.westernfilter.com Element Pak Offering* P R-P-W R-P-W R-P-W Max Flow GPM 10 20 30
Throttle check valve. Type Z2FS. Contents. Features. RE Edition: Replaces: 10.07
Throttle check valve Type ZFS RE 758 Edition: 06-0 Replaces: 0.07 Size 0 Component series 3X Maximum operating pressure 35 bar [4569 psi] Maximum flow 60 l/min [4.3 US gpm] H5556 Features Sandwich plate
Filter. Spin-on Filter. Spin-on Filterelement Serie HF 620. Innengewinde. Bestellnr. (ohne Filterelement) Code. Typ
Filter Bestellnr. (ohne Filterelement) Typ Innengewinde G Code Spin-on Filter Serie HF 620-1000 HF620.20-B00-GE-XA-DA-XB-DA HHT03084-1050 HF620.20-B02-GE-XA-DA-XB-DA 3/4 HHT03163-1100 HF620.20-B17-GE-XA-DA-XB-DA
Check valve. Type Z1S. Contents. Features. RE Edition: Replaces: 09.10
Check valve Type ZS RE 537 Edition: 05-06 Replaces: 09.0 Size 0 Component series 4X Maximum operating pressure 350 bar [5076 psi] Maximum flow 00 l/min [6.4 US gpm] H7647 Features Sandwich plate valve
Change-Over Inline Filter RFLD Welded Version
Change-Over Inline Filter RFLD Welded Version up to 15000 l/min, up to 16 bar RFLD 1300 CAS to RFLD 15000 CBW 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The filter housings are designed
Filter elements for microfiltration. Type 46. CELLUDISC filter elements. Features. Contents. RE Edition:
Filter elements for microfiltration Type 46. CELLUDISC filter elements RE 51470 Edition: 2014-08 Size: 10" Maximum pressure differential: 5 bar [73 psi] Filter rating: 2 and 10 μm Operating temperature:
Filtering elements differential collapsing pressure tested in compliance with ISO 2941:
DESCRIPTION Many years of in-field experience have shown the necessity of more and more efficient controls on the contamination level of hydraulic fluids and fuels. With this goal uppermost in its mind,
Product Manual VIKING. EN397-3a 1999
Product Manual VIKING EN397-3a 1999 One partner all over the world Hägglunds Drives is one of the worlds leading manufacturer of heavy duty hydraulic drive systems. If what you need is low speed and high
MPT SERIES RETURN FILTER
MPT SRIS The series of filters MPT has specifically been designed for use on mobile power packs for industrial, mobil and lift truk applications. The MPT filter range is suitable for flow rates up to 50
Line filter Pi Features. Nominal pressure 16 bar (230 psi), nominal size 400 up to 6000
Line filter Pi 1907 Nominal pressure 16 bar (20 psi), nominal size 400 up to 1 Features _ High performance filters for modern hydraulic systems Provided for pipe installation Modular design Compact design
In line high pressure filters. HF 725 series
In line high pressure filters HF 725 series THE IMPORTANCE OF AN EFFICIENT FILTRATION The main cause of anomalies in hydraulic systems has to be attributed to the presence of contaminants in the fluid.
MATERIALS CARTRIDGES PRESSURES VALUES TESTS CARRIED OUT ON FILTER ELEMENTS
1 OIL FILTER DESCRIPTION Many years of in-field experience have shown the necessity of more and more efficient controls on the contamination level of hydraulic fluids and fuels. With this goal uppermost
PHONE: 937/ FAX:
Magnetic Tank Cleaners Multi Magnet Standard or Heavy Duty Lenz magnetic tank cleaners pick up material that ordinary filters miss and thus maintain cleaner oil. The cleaner the oil; the less problems
DSE3B /118 ED DIRECTIONAL VALVE WITH PROPORTIONAL CONTROL SERIES 10 SUBPLATE MOUNTING ISO p max 350 bar Q max 40 l/min
83 215/118 ED DSE3B DIRECTIONAL VALVE WITH PROPORTIONAL CONTROL SUBPLATE MOUNTING ISO 4401-03 p max 350 bar Q max 40 l/min MOUNTING INTERFACE OPERATING PRINCIPLE ISO 4401-03-02-0-05 (CETOP 4.2-4-03-350)
Inline Filter RFL. Cast version Volume rates up to 1300 l/min* Pressure range 25/40 bar
RFL inline filters are designed for inline mounting in hydraulic and lubrication systems. Inline Filter RFL Cast version Volume rates up to 1300 l/min* Pressure range 25/40 bar * For larger flow rates,
Maxiflow Series Spin-on Filters Max. 360 I/min - 10 bar
Maxiflow Series Spin-on Filters Max. 36 I/min - 1 bar Designed for both suction and return application Spin-on filters The Maxiflow Series full flow filters for suction or return are designed to provide
DL /116 ED SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT VERSION SERIES 10 SUBPLATE MOUNTING ISO p max 320 bar Q max 125 l/min
41 330/116 ED SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT VERSION SUBPLATE MOUNTING ISO 4401-05 p max 320 bar Q max 125 l/min MOUNTING INTERFACE OPERATING PRINCIPLE ISO 4401-05-04-0-05 (CETOP 4.2-4-05-320)
DL /118 ED SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT VERSION SUBPLATE MOUNTING ISO p max 280 bar Q max 50 l/min
41 211/118 ED DL3 SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT VERSION SUBPLATE MOUNTING ISO 4401-03 p max 280 bar Q max 50 l/min MOUNTING SURFACE OPERATING PRINCIPLE ISO 4401-03-02-0-05 (CETOP
2/2-way proportional seat valve
1/1 Hauhinco-2_2-way_proportional seat valve_dn10-pn320_pn500 water hydraulics 01/2016 2/2-way proportional seat valve Directly actuated DN10 PN320, PN500 Features: Directly actuated directional seat valve
LMP series
Low & Medium Pressure fi lters LMP 95-95-95 series Maximum working pressure up to.5 MPa (5 bar) - Flow rate up to 000 l/min 7 Low & Medium Pressure filters Introduction FILTER SIZG DEX CALCULATION CORRECTIVE
LS 025 LS 035 In-line mounting Connection up to G¾ / -12 SAE Nominal flow rate up to 33 l/min / 8.7 gpm
Suction Filters LS 025 LS 035 In-line mounting Connection up to G¾ / -2 SAE Nominal flow rate up to 33 l/min / 8.7 gpm Description Application To be installed in the suction line of the pumps of hydraulic
Pressure relief valve, pilot operated
Pressure relief valve, pilot operated RE 576/05. Replaces: 0.03 /0 Type ZDB and ZDB Size 0 Component series 4X Maximum operating pressure 35 bar [4600 psi] Maximum flow 00 l/min [6.4 US gpm] H7747 Table
Block mounting filter, for lateral flange-mounting
Block mounting filter, for lateral flange-mounting RE 51418/12.1 Replaces: 1.1 1/18 Type 245PSFN4 to 4; 245PSF13, 15 Size according to DIN 2455: 4 to 4 Additional sizes: 13, 15 Nominal pressure 25 bar
DSE /117 ED DIRECTIONAL VALVE WITH PROPORTIONAL CONTROL SERIES 11 SUBPLATE MOUNTING ISO p max 350 bar Q max 40 l/min
83 2/117 ED DSE3 DIRECTIONAL VALVE WITH PROPORTIONAL CONTROL SUBPLATE MOUNTING ISO 41-3 p max 3 bar Q max l/min MOUNTING SURFACE OPERATING PRINCIPLE ISO 41-3-2-- (CETOP 4.2-4-3-3). 33 3.2 21. 12.7.1.7
Remote Process Actuation Control System AirLINE - Rockwell 1734 Point I/O System
Remote Process Actuation Control System AirLINE - Rockwell 1734 Type 8644 can be combined with... Fully compatible with Rockwell 1734 Point I/O System Combination of Fieldbus, pilot valves and I/O modules
Block mounting filter, for vertical flange-mounting
Block mounting filter, for vertical flange-mounting RE 51417/12.1 Replaces: 7.1 1/18 Type 45PBFN4 to 1; 45PBF13, 15 Size according to DIN 2455: 4 to 1 Additional sizes: 13, 15 Nominal pressure 45 bar [653
FHA 051 Working pressure 6000 psi
6 SRIS Working pressure 6000 psi Style S Style Style T Style D Style V Style Z D.I. 7 8 Technical data Filter body (Materials) Head: Steel (chemical heat treatment) Housing: Steel (chemical heat treatment)