Ermeto Original Rotary fittings
|
|
|
- Ross Perkins
- 5 years ago
- Views:
Transcription
1 Ermeto Original Rotary fittings
2 Visual index EO rotary fittings DG 0 DG 02-R DG 02-M p. P6 p. P7 p. P8 EO 2 cone end / Male BSPP thread Male metric thread EO 2 cone end ED-seal (ISO 79) / EO 2 cone end ED-seal (ISO 79) / EO 2 cone end DG 03 DG 0-R DG 0-M p. P9 p. P0 p. P EO 2 cone end / Male BSPP thread Male metric thread EO 2 cone end ED-seal (ISO 79) / EO 2 cone end ED-seal (ISO 79) / EO 2 cone end DG 05 DG 06-R DG 06-M p. P2 p. P3 p. P EO 2 cone end / Male BSPP thread Male metric thread EO 2 cone end ED-seal (ISO 79) / EO 2 cone end ED-seal (ISO 79) / EO 2 cone end DG 07 DG 08 DG 208 p. P5 p. P6 p. P7 EO 2 cone end / EO 2 cone end / Male BSPP thread EO 2 cone end EO 2 cone end ED-seal (ISO 79) / EO 2 cone end DVGE-R DVGE-M p. P8 p. P9 Male BSPP thread Male metric thread ED-seal / EO 2 cone end ED-seal / EO 2 cone end DVWE-R DVWE-M p. P20 p. P2 Male BSPP thread Male metric thread ED-seal / EO 2 cone end ED-seal / EO 2 cone end P2
3 DG Ball bearing rotary fittings For working pressures up to 350 bar. Favourable pressure/rpm ratio Application: Connecting a fi xed point to a rotating, swinging or moving machine part via hoses. To prevent torsion and to avoid small hose radius. Flow media: Hydraulic oils and lubricants on mineral oil base. Also for hydraulic fl uids HETG and HEES. Not suitable for corrosive and HFC-fl uids or gases. Construction: Compact, maintenance-free construction, service-proved. Combined ball and plain bearing with constant lubrication. Low starting torque. Wear-resistant annular piston sealings. s: Casing, body nut of steel, annular piston sealing: POM (e. g. Delrin)/FKM. Eolastic sealing: NBR (e.g. Perbunan), also available in FKM. Surface: Cr(VI)-free. Construction systems: 8 different versions with one rotational axis. Multiaxial rotary couplings on request. Tube connections according to DIN 2353, series S. Maximum working pressure 350 bar (peak pressure) Male stud sealing by Eolastic seals of NBR. Male stud with metric parallel or BSPP thread. Assembly instructions: The life of a rotary fi tting depends considerably on a stressfree line connection. Therefore the direct connection with tubes is to be avoided. For connection of hoses the use of swivel nut fi ttings (DIN 3865) is recommended. We recommend short, straight hose lines (free hose length approx. 5 hose O.D.). Thus shocks, vibrations etc. are absorbed. Attention! Rotary fi ttings with double needle bearing for higher side force stability on request. Series DGNN/DGBN. Maximum permissible fl owrate of media: 8 m/s (recommended 5-6 m/s) Nominal temperatures: 25 C up to +80 C. Warehousing: Ball bearing rotary fittings can be stocked for 6 months. Ware housing up to year is possible with storage conditions acc. to DIN 776. Perbunan = registered trademark of Bayer Number of revolutions and starting torques: Chart P Tube DN Nominal Permissible number of revolutios (rpm.) under a working pressure of Initial torque O.D. diameter (mm) 25 bar 6 bar 00 bar 60 bar 250 bar 350 bar at 250 bar/nm P3
4 DG Ball bearing rotary fittings 9 ring piston 8 intermediate ring 7 rubber spring 6 base 5 pivot ball 3 top 2 raceway dust seal position specifi cation P
5 Plain bearing rotary fittings for slow rotating, swinging or moving machine parts up to 0 bar (series L) or up to 00 bar (series S). Rotary fittings Application: Connecting a fi xed point to a rotating, swinging or moving machine part via hoses. To prevent torsion and to avoid small hose radius. Flow media: Hydraulic oils and lubricants on mineral oil base. Also for hydraulic fl uids HETG and HEES. Not suitable for corrosive and HFC-fl uids or gases. Nominal temperature: For sealings of NBR: 35 C up to +00 C. For sealings of FKM: 25 C up to +20 C. Tube O.D. DN Nominal diameter mm 06L 06S 08L 08S 5 0L 0S 6 2L 2S 8 5L S 6S 0 8L 22L 20S 25S 6 28L 30S 22 35L 3L 38S 25 Construction: Compact, maintenance-free construction, service-proved. s: Casing, body nut and progressive ring of steel. Sealing of NBR (Perbunan), on request of FKM. Plain bearing rotary fittings are not available in stainless steel or brass. Surface: Cr(VI)-free. Construction-system: Series L, tube O. D. 6 to 35 mm, working pressure (PN): 0 bar Series S, tube O. D. 6 to 38 mm, working pressure (PN): 00 bar Tube connection according to DIN 2353, ISO 83-. Male stud with metric thread and BSP thread. Sealing of male stud by Eolastic-seals. Perbunan = registered trademark of Bayer Number of revolutions: Series L Tube O.D Permiss. no. rpm Series S Tube O.D Permiss. no rpm Assembly instruction: The life of a rotary fi tting depends considerably on a stressfree line connection. Therefore the direct connection with tubes is to be avoided. For connection of hoses use of swivel nut connections (DIN 3865) is recommended. We recommend short, straight hose lines (free hose length approx. 5 hose O. D.). Thus shocks, vibrations etc. are absorbed. P P5
6 DG 0 Straight ball bearing rotary union EO 2 cone end / EO 2 cone end X2) Axis D Weight Series 5 DN L L2 L3 S S2 S3 g/ piece Order code* CF ) S ) DG0/06SOMD DG0/08SOMD Pressure ratings DG0/2SOMD see chart DG0/6SOMD DG0/20SOMD DG0/25SOMD DG0/30SOMD DG0/38SOMD 0 Pressure ratings see chart Steel, zinc plated, Cr(VI)-free CF DG0/06SOMDCF VIT P6
7 DG 02-R Straight male stud ball bearing rotary union Male BSPP thread ED-seal (ISO 79) / EO 2 cone end X) Axis X2) Eolastic-sealing D Weight Series 5 T DN D3 L L2 L3 L S S2 S3 g/ piece Order code* CF ) S ) 06 G / A DG02/06SROMD 08 G / A DG02/08SROMD Pressure ratings 2 G 3/8 A DG02/2SROMD see chart 6 G /2 A DG02/6SROMD 20 G 3/ A DG02/20SROMD 25 G A DG02/25SROMD Pressure ratings 30 G / A DG02/30SROMD see chart 38 G /2 A DG02/38SROMD 0 P Steel, zinc plated, Cr(VI)-free CF DG02/06SROMDCF VIT/NBR P7
8 DG 02-M Straight male stud ball bearing rotary union Male metric thread ED-seal (ISO 997) / EO 2 cone end X) Axis X2) Eolastic-sealing D Weight Series 5 T DN D3 L L2 L3 L S S2 S3 g/ piece Order code* CF ) S ) 06 M DG02/06SMOMD 08 M DG02/08SMOMD Pressure ratings 2 M DG02/2SMOMD see chart 6 M DG02/6SMOMD 20 M DG02/20SMOMD 25 M DG02/25SMOMD Pressure ratings 30 M DG02/30SMOMD see chart 38 M DG02/38SMOMD 0 Steel, zinc plated, Cr(VI)-free CF DG02/06SMOMDCF VIT/NBR P8
9 DG 03 Elbow ball bearing rotary union EO 2 cone end / EO 2 cone end X2) Axis D Weight Series 5 DN L L2 L3 L L5 L6 S S2 S3 g/ piece Order code* CF ) S ) DG03/06SOMD DG03/08SOMD Pressure ratings DG03/2SOMD see chart DG03/6SOMD DG03/20SOMD DG03/25SOMD DG03/30SOMD DG03/38SOMD 0 Pressure ratings see chart P Steel, zinc plated, Cr(VI)-free CF DG0/06SOMDCF VIT P9
10 DG 0-R Elbow male stud ball bearing rotary union Male BSPP thread ED-seal (ISO 79) / EO 2 cone end X) Axis X2) Eolastic-sealing D Weight Series 5 T DN D3 L L2 L3 L L6 S S2 S3 g/ piece Order code* CF ) S ) 06 G / A DG0/06SROMD 08 G / A DG0/08SROMD Pressure ratings 2 G 3/8 A DG0/2SROMD see chart 6 G /2 A DG0/6SROMD 20 G 3/ A DG0/20SROMD 25 G A DG0/25SROMD 30 G / A DG0/30SROMD 38 G /2 A DG0/38SROMD 0 Pressure ratings see chart Steel, zinc plated, Cr(VI)-free CF DG0/06SROMDCF VIT/NBR P0
11 DG 0-M Elbow male stud ball bearing rotary union Male metric thread ED-seal (ISO 997) / EO 2 cone end X) Axis X2) Eolastic-sealing D Weight Series 5 T DN D3 L L2 L3 L L6 S S2 S3 g/ piece Order code* CF ) S ) 06 M DG0/06SMOMD 08 M DG0/08SMOMD Pressure ratings 2 M DG0/2SMOMD see chart 6 M DG0/6SMOMD 20 M DG0/20SMOMD 25 M DG0/25SMOMD Pressure ratings 30 M DG0/30SMOMD see chart 38 M DG0/38SMOMD 0 P Steel, zinc plated, Cr(VI)-free CF DG0/06SMOMDCF VIT/NBR P
12 DG 05 Double elbow ball bearing rotary union EO 2 cone end / EO 2 cone end X) Axis D Weight Series 5 DN L L2 L3 L L5 L6 L7 L8 L9 S S2 S3 g/ piece Order code* CF ) S ) DG05/2SOMD DG05/6SOMD Pressure DG05/20SOMD ratings DG05/25SOMD see chart DG05/30SOMD DG05/38SOMD 0 Steel, zinc plated, Cr(VI)-free CF DG05/2SOMDCF VIT P2
13 DG 06-R Double elbow male stud ball bearing rotary union Male BSPP thread ED-seal (ISO 79) / EO 2 cone end (Adjustable at male thread axis, consisting of DG05 + EGE) X) Axis X2) Eolastic-sealing D Weight Series 5 T DN D3 L L2 L3 L5 L6 L7 S S2 S3 S g/ piece Order code* CF ) S ) 2 G 3/8 A DG06/2SROMD 6 G /2 A DG06/6SROMD Pressure 20 G 3/ A DG06/20SROMD ratings 25 G A DG06/25SROMD see chart 30 G / A DG06/30SROMD 38 G /2 A DG06/38SROMD 0 P Steel, zinc plated, Cr(VI)-free CF DG06/06SROMDCF VIT/NBR P3
14 DG 06-M Double elbow male stud ball bearing rotary union Male metric thread ED-seal (ISO 997) / EO 2 cone end (Adjustable at male thread axis, consisting of DG05 + EGE) X) Axis X2) Eolastic-sealing D Weight Series 5 T DN D3 L L2 L3 L5 L6 L7 S S2 S3 S g/ piece Order code* CF ) S ) 2 M DG06/2SMOMD 6 M DG06/6SMOMD Pressure 20 M DG06/20SMOMD ratings 25 M DG06/25SMOMD see chart 30 M DG06/30SMOMD 38 M DG06/38SMOMD 0 Steel, zinc plated, Cr(VI)-free CF DG06/06SMOMDCF VIT/NBR P
15 DG 07 Straight bulkhead ball bearing rotary union EO 2 cone end / EO 2 cone end X) Axis D Weight Series 5 DN T L L2 L3 L L5 L6 S S2 S3 S g/ piece Order code* CF ) S ) M DG07/06SOMD M DG07/08SOMD Pressure M DG07/2SOMD ratings M DG07/6SOMD see chart M DG07/20SOMD M DG07/25SOMD Pressure M DG07/30SOMD ratings M DG07/38SOMD see chart 0 P Steel, zinc plated, Cr(VI)-free CF DG07/06SOMDCF VIT P5
16 DG 08 Elbow bulkhead ball bearing rotary union EO 2 cone end / EO 2 cone end X) Axis D Weight Series 5 DN T L L2 L3 L L5 L6 L7 L8 S S2 S3 S g/ piece Order code* CF ) S ) M DG08/06SOMD M DG08/08SOMD Pressure M DG08/2SOMD ratings M DG08/6SOMD see chart M DG08/20SOMD M DG08/25SOMD Pressure M DG08/30SOMD ratings M DG08/38SOMD see chart 0 Steel, zinc plated, Cr(VI)-free CF DG08/06SOMDCF VIT P6
17 DG 208-R Double elbow male stud ball bearing rotary union Male BSPP thread ED-seal (ISO 79) / EO 2 cone end D Series 5 T DN L L2 L3 L L5 L6 L7 S S2 S3 S Order code* CF ) S ) 2 G 3/8 A DG208/2SROMD 6 G /2 A DG208/6SROMD Pressure ratings 20 G 3/ A DG208/20SROMD see chart 25 G A DG208/25SROMD 38 G /2 A DG208/38SROMD 0 P Steel, zinc plated, Cr(VI)-free CF DG208/2SOMDCF VIT P7
18 DVGE-R Straight male stud plain bearing rotary union Male BSPP thread ED-seal / EO 2 cone end X) Eolastic-sealing L8 larger than DIN 3852 chart page P22 D Weight PN (bar) 5 ) Series T DN D3 L L2 L3 L5 L6 S S2 S3 g/ piece Order code* CF VIT L 3 ) 06 G / A DVGE06LROMD G / A DVGE08LROMD G 3/8 A DVGE0LROMD G /2 A DVGE2LROMD G 3/ A DVGE5LROMD G A DVGE8LROMD G A DVGE22LROMD G / A DVGE28LROMD G /2 A DVGE35LROMD 0 0 S ) 06 G / A DVGE06SROMD G / A DVGE08SROMD G 3/8 A DVGE0SROMD G /2 A DVGE2SROMD G 3/ A DVGESROMD G 3/ A DVGE6SROMD G A DVGE20SROMD G A DVGE25SROMD G / A DVGE30SROMD G /2 A DVGE38SROMD ) L = light series; 0 Steel, zinc plated, Cr(VI)-free CF DVGE06LROMDCF NBR FKM VITCF DVGE06LROMDVITCF P8
19 DVGE-M Straight male stud plain bearing rotary union Male metric thread ED-seal / EO 2 cone end X) Eolastic-sealing L8 larger than DIN 3852 chart page P22 D Weight PN (bar) 5 ) Series T DN D3 L L2 L3 L5 L6 S S2 S3 g/ piece Order code* CF VIT L 3 ) 06 M DVGE06LMOMD M DVGE08LMOMD M DVGE0LMOMD M DVGE2LMOMD M DVGE5LMOMD M DVGE8LMOMD M DVGE22LMOMD M DVGE28LMOMD M DVGE35LMOMD 0 0 S ) 06 M DVGE06SMOMD M DVGE08SMOMD M DVGE0SMOMD M DVGE2SMOMD M DVGE6SMOMD M DVGE20SMOMD M DVGE25SMOMD M DVGE30SMOMD M DVGE38SMOMD ) L = light series; 0 P Steel, zinc plated, Cr(VI)-free CF DVGE06LMOMDCF NBR FKM VITCF DVGE06LMOMDVITCF P9
20 DVWE-R Elbow male stud plain bearing rotary union Male BSPP thread ED-seal / EO 2 cone end X) Eolastic-sealing L8 larger than DIN 3852 chart page P22 D Weight PN (bar) 5 ) Series T DN D3 L L2 L3 L5 L6 L7 S S2 S3 g/ piece Order code* CF VIT L 3 ) 06 G / A DVWE06LROMD G / A DVWE08LROMD G 3/8 A DVWE0LROMD G /2 A DVWE2LROMD G 3/ A DVWE5LROMD G A DVWE8LROMD G A DVWE22LROMD G / A DVWE28LROMD G /2 A DVWE35LROMD 0 0 S ) 06 G / A DVWE06SROMD G / A DVWE08SROMD G 3/8 A DVWE0SROMD G /2 A DVWE2SROMD G 3/ A DVWESROMD G 3/ A DVWE6SROMD G A DVWE20SROMD G A DVWE25SROMD G / A DVWE30SROMD G /2 A DVWE38SROMD ) L = light series; 0 Steel, zinc plated, Cr(VI)-free CF DVWE06LROMDCF NBR FKM VITCF DVWE06LROMDVITCF P20
21 DVWE-M Elbow male stud plain bearing rotary union Male metric thread ED-seal / EO 2 cone end X) Eolastic-sealing L8 larger than DIN 3852 chart page P22 D Weight PN (bar) 5 ) Series T DN D3 L L2 L3 L5 L6 L7 S S2 S3 g/ piece Order code* CF VIT L 3 ) 06 M DVWE06LMOMD M DVWE08LMOMD M DVWE0LMOMD M DVWE2LMOMD M DVWE5LMOMD M DVWE8LMOMD M DVWE22LMOMD M DVWE28LMOMD M DVWE35LMOMD 0 0 S ) 06 M DVWE06SMOMD M DVWE08SMOMD M DVWE0SMOMD M DVWE2SMOMD M DVWE6SMOMD M DVWE20SMOMD M DVWE25SMOMD M DVWE30SMOMD M DVWE38SMOMD ) L = light series; P 0 Steel, zinc plated, Cr(VI)-free CF DVWE06LMOMDCF NBR FKM VITCF DVWE06LMOMDVITCF P2
22 Port tapping for plain bearing rotary fittings DVGE and DVWE Port tapping form X according to DIN 3852, part and part 2 (for parallel male studs) Thread d small a L9 L8 W d +0. max min min M M ) M M M ) M ) M G / A 20 2 ) G 3/8 A G /2 A 28 2 ) G 3/ A G A 2 ) G / A 5 2 ) G /2 A ) Not in DIN ) Different from DIN 3852 P22
Ermeto Original Rotary fittings
Ermeto Original Rotary fittings Visual index EO rotary fittings DG 0 DG 02-R DG 02-M p. P6 p. P7 p. P8 EO 2 cone end / Male BSPP thread Male metric thread EO 2 cone end ED-seal (ISO 79) / EO 2 cone end
RHD/V/Z non return valve
RHD/V/Z non return valve Design with sealing edge: Size 06L and 08L / 06S and 08S and all sizes in stainless steel with a PTFDE sealing disc. Design with O-ring (item. 7): Sizes L, 2L, 5L, 8L, 22L, 28L,
SensoControl Test Points Diagnostic- Test equipment Industrial Products
Test Points Diagnostic- Test equipment Industrial Products Parker Visual index Series 1 Test point fi tting with pin-lock EMA1 GMA1 VKA1 p. Q4 p. Q5 p. Q6 Series 3 Test point with threaded connection M
Ø5 (Ø.20) S12,65 x 1,5. M16 x 1,5 * 2 Special thread: buttress thread S12,65 x 1,5. Max. Working Pressure: 400 bar / 5801 PSI Burst Pressure:
Test Hoses SMS / SS + Working Pressure up to 630 bar / 9135 PSI Technical Data for Test Hose A B (Stard Version) C D Nominal Bore () (mm) Max. Working Pressure (PN) (bar / PSI) 00 / 5801 630 / 9135 30
LF 3600 Push-In Fittings Range
LF 300 Push-In Fittings Range Stud Fittings Straights 375 BSPT Page 1-97 301 BSPP/Metric Page 1-97 31 Metric Page 1-97 31 BSPP/Metric Page 1-9 321 BSPT Page 1-9 331 BSPP/Metric Page 1-9 300 Page 1-9 Push-In
3- and 4-Way Ball Valves KH3/KH4
3- and 4-Way Ball Valves KH3/KH4 up to 500 bar up to DN 20 KH3 KH4 1. DESCRIPTION 1.1. GENERAL According to DIN 2429, HYDAC 3/2 and 4/2 way ball valves are units which shut off and divert the flow of an
Rapid push-in fittings for plastic tubes Series 1000
CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Rapid push-in fittings for plastic tubes Series 1000 Tube external diameters: 5/3, 6/, 8/6, 10/8, 12/10, 15/12,5 mm Fittings threads: metric (M5, M6,
2/2- and 3/2-way Ball Valve with pneumatic rotary actuator, plastic body, DN 10-50
/- and 3/-way Ball Valve with pneumatic rotary actuator, plastic body, DN -50 Radially expandable body Pneumatic actuator in compact model Optical position indicator Control valve acc. to NAMUR Type 5
LIQUIfit Push-In Fittings
LIQUIfit Push-In Fittings This "eco-designed" range proposes an innovative alternative for water applications; no fluid contamination occurs and environmental protection is guaranteed. These fittings ensure
Hose, Tubes & Ducting. Hose, Tubes & Ducting
Hose, Tubes & Ducting 382 Together, we can kick out the cost of contamination 80% of all hydraulic failures are caused by poor maintenance and contamination. So let s put a stop to it today! Partner with
Hose, Tubes & Ducting. Hose, Tubes & Ducting
Hose, Tubes & Ducting 392 Together, we can kick out the cost of contamination 80% of all hydraulic failures are caused by poor maintenance and contamination. So let s put a stop to it today! Partner with
LF 3800/LF 3900 Push-In Fittings Range
LF 300/LF 3900 Push-In Fittings Range Stud Fittings Straights 305 3905 BSPT Page 1-79 305 Page 1-79 301 3901 BSPP/Metric Page 1-79 321 3921 BSPT Page 1-0 321 3921 Page 1-0 331 3931 BSPP/Metric Page 1-0
Variable Displacement Plug-In Motor A6VE
Electric Drives and Controls Hydraulics Linear Motion and Assembly echnologies Pneumatics Service Variable Displacement Plug-In Motor A6VE RE 91 606/06.05 1/16 Replaces: 05.99 echnical data sheet Series
Axial piston variable pump (A)A4VSO
Axial piston variable pump (A)A4VSO RA 92050-A/06.09 1/64 Replaces: 09.97 Data sheet Series 10, 11 and 30 Size 40...1000 Nominal pressure 5100 psi (350 bar) Peak pressure 5800 psi (400 bar) Open circuit
2/2 and 3/2-way ball valve with pneumatic rotary actuator
2/2 and 3/2-way ball valve with pneumatic rotary actuator Pneumatic rotary actuator Stainless steel ball valve External regulation of the pistons Full bore Type 8805 can be combined with Favourable flow
Fittings and Accessories. for Centralized Lubrication Systems and General Use
and Accessories 1-0103-US 1 Fittings and Accessories 1-0103-US for Centralized Lubrication Systems and General Use Fittings and Accessories 1-0103-US 3 Contents Page Adaptors... 9, 10 Banjo fittings...
Description Product group Rod seal
Description Product group Rod seal Design N symmetrical u-ring (05) NI asymmetrical u-ring with inner main sealing lip (07) Profile no. 05/07 Specification E suitable for onesided pressure load Model STI
2/2 or 3/2 way ball valve with pneumatic rotary actuator
2/2 or 3/2 way ball valve with pneumatic rotary actuator Pneumatic rotary actuator Stainless steel ball valve External regulation of the pistons Full bore Type 8805 can be combined with Favourable flow
2/2-way Angle Seat Valve, manually operated, for media up to +180 C
2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel valve body Compact industrial design with long service life /2702 can be combined
Type Pressure Transmitter with display. Pressure Transmitter. Technical data. DN15-50 Body material. Stainless steel 316L Actuator material
2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel 316L valve body Compact industrial design with long service life Excellent
Axial piston variable pump A7VO
Axial piston variable pump A7VO RE 92203/06.09 1/52 Replaces: 05.99 Data sheet Series 63 Sizes NG250 to 500 Nominal pressure 350 bar Peak pressure 400 bar Open circuit Contents Type code for Standard program
Fitting assembly. Catalogue /UK
F2 Table of contents Port connections M...F4 Port connections BSPP...F5 Port connections UNF...F6 Port connections TAPER...F7 Adjustable fi ttings with locknut...f8 F EO swivels...f9 Triple-Lok / O-Lok
Ferulok Flareless Bite Type Fittings
Flareless Bite Type Fittings Flareless SAE 080101 / Flareless Flareless SAE 080601 / Flareless Flareless SAE 080102 / NPTF Flareless SAE 080120 / SAE-ORB Flareless SAE 080103 / NPTF Flareless SAE 080221
2/2-way Angle Seat Valve, manually operated, for media up to +180 C
2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel 316L valve body Compact industrial design with long service life /2702 can
Change-Over Inline Filter RFLD Weld Version
Change-Over Inline Filter RFLD Weld Version up to 15000 l/min, up to 16 bar RFLD 1300 CAS to RFLD 15000 CBW 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The fi lter housings are designed
2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, DN 10-50
2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, 10-50 (2652) (2655) 2 or ball valve Pneumatic actuator Compact design Visual position indicator Types 2652/2655 can be
HIGH PRESSURE - pumps
Gear pumps TRAE Positive displacement, external gear pumps intended for hydraulic systems of machines and devices. Material Housing Aluminium Mounting plate Aluminium (groups 1 and 2), cast iron (group
Function Fittings. Flow Control Regulators. Piloted Function Fittings. Non-Return Valves. LIQUIfit Pressure Fittings. Other Function Fittings
Flow Control Regulators Piloted Non-Return Valves LIQUIfit Pressure Fittings Other Silencers Flow Control Regulators (P. 4-6) Blocking Fittings (P. 4-36) Piloted Non-Return Valves (P. 4-38) Function:
BALL VALVES FILTERS TEST POINTS 8
BALL VALVES FILTERS TEST POINTS 8 8 PRODUCT CATALOGUE 357 HYDROSCAND BALL VALVES, FILTERS TEST POINTS TABLE OF CONTENTS BALL VALVES PAGE BALL VALVES The ball valves are mainly used as shut-down valves
3/2-way and 2 x 3/2-way Solenoid Valve for pneumatics
654 3/-way and x 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Fast response times Space saving ( x 3/-way version) Type 654 can be combined with...
RETURN FILTERS. MATERIALS Head: Aluminium alloy Spin-on cartridge: Steel Bypass valve: Polyammide Seals: NBR Nitrile Indicator housing: Brass
COMPONENTS RC MATERIALS Head: Aluminium alloy Spin-on cartridge: Steel Bypass valve: Polyammide Seals: NBR Nitrile Indicator housing: Brass APPLICATION EXAMPLE PRESSURE (ISO 10771-1:2002) Max working:
2/2-way Globe Valve for media up to +180 C, DN
2/2-way Globe Valve for media up to +180 C, DN 10-100 Compact globe valve version Flange, threaded and welded ports as standard Stainless steel 316L valve body vailable with flow direction below and above
EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI
2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI Over 30 patents, more than 8,000 standard articles, and 2,000 customized solutions impressively
Hyva Hoses & Adapters Introduction
Introduction Hyva Hoses Hoses offered by HYVA comply with the highest safety standards for truck hydraulics. Working pressures range from 225 to 350 bar. Code system hydraulic hoses Hose 1 H.P. 16-2000
2/2-way Angle-Seat Valve for media up to +180 C, threaded port connection, DN 13-65
2/2-way Angle-Seat Valve for media up to +180 C, threaded port connection, DN 13-65 Standard valve body Type 2000 can be combined with Short valve body High flow rate and long life cycle Very high cycle
ANACONDA MULTIFLEX CONDUIT TYPE UI-CAP
ANACONDA MULTIFLEX CONDUIT TYPE Small diameters, flexible and very corrosion resistant Anaconda Multifl ex type is a small bore, fl exible, fully interlocked, corrosion resistant stainless steel AISI-304
Brass Compression Fitting Range
Compression Fitting Range Fittings Stud Fittings 0105 BSPT Page 5-9 0105 NPT Page 5-9 0101 BSPP/Metric Page 5-10 0101..39 BSPP Page 5-10 0101 Metric Page 5-11 01 BSPP Page 5-11 0109 BSPT Page 5-12 0109
MARCH Polyethylene Piping Systems.
MARCH 2017 Polyethylene Piping Systems www.plasson.com.au GLOBAL PRESENCE LOCAL COMMITMENT Get an expert on your team. Plasson has the widest range of compression, electrofusion, threaded and transitional
Swivel Joint Heads (Basic Unit)
Swivel Joint Heads (Basic Unit) Design Configuration Weld edge preparation according to DIN 2559 or ANSI B16.25 Grease nipple/ ball Lifetime greasing Grease nipple only on request Stator Rotor Internal
05. YY XX. XX. series nominal size
Balflex MicroTest Check Line Hoses, Connectors & Gauges Balflex MicroTest is the range of hoses, couplings and gauges for check lines in hydraulic or refrigeration systems. Balflex MicroTest is produced
Pneumatics CONTENT
Pneumatics CONTENT 2 3 4 5 6 7 8 9 Fittings 453 Flexible Tube 47 Quick Release Couplings 477 Actuators 485 Solenoid & Pneumatic Valves 495 Mechanical & Manual Valves 507 Automatic Valves 57 Filters, Regulators
3/2-way Solenoid Valve for pneumatics
656 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Type 656 can be combined with... Fast response times Type 506 Type 510/511
Compression Fittings. Brass Compression Fittings. Stainless Steel Compression Fittings. PL Nickel-Plated Brass Spigot Fittings
Compression Fittings Compression Fittings Stainless Steel Compression Fittings PL Nickel-Plated Spigot Fittings Compression Fittings Compression Fittings Compression Fittings (P. 5-5) Stainless Steel Compression
EO and EO-2 Metric Bite Type Fittings
and -2 Metric Bite Type Fittings The Fitting Authority Catalog 4300 Nuts, Sleeves, Locknut, Inserts M FM DPR D PSR Nut Functional Nut Progressive Ring Cutting Ring Progressive Ring F13 F14 F13 F13 F13
3/2-way and 2 x 3/2-way Solenoid Valve for pneumatics
654 3/-way and x 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Fast response times Space saving ( x 3/-way version) Type 654 can be combined with...
MULTI-COUPLING PLATES
MULTI-COUPLING PLATES MP Series Hydraulic Multi-Coupling Plate Overview - Front end loaders - Harvesting equipment - Construction machinery - Refrigeration - Snow removal equipment - Energy sector - Any
ay Manifold Mounted KHP3K
3-Way ay Manifold Mounted Ball Valves KHP3K up to 500 bar up to DN 32 1. DESCRIPTION 1.1. GENERAL According to DIN 2429, FLUTEC 3/2-way manifold mounted ball valves are units for shutting off and diverting
PRESSURE FILTERS. BYPASS VALVE Setting: 170 kpa (1,7 bar) ± 10% WORKING TEMPERATURE From -25 to +110 C
COMPONENTS MATERIALS Head: Aluminium alloy Spinon cartridge: Steel Bypass valve: Polyammide Seals: NBR Nitrile (FKM on request fluoroelastomer) Indicator housing: Brass APPLICATION EXAMPLE PRESSURE (ISO
Data sheet - Selected technical standards
DIN DIN 13-5 DIN 13-6 ISO general purpose metric screw threads Part 5: Nominal sizes for 1 mm and 1.25 mm fi ne pitch threads; nominal diameter from 7.5 mm to 200 mm ISO general purpose metric screw threads
Swivel Joints Rotary Unions
Maschinenbau GmbH & Co. KG Swivel Joints Rotary Unions since 1970 Knowledge and experience General Information We about us Klaas Maschinenbau GmbH & Co. KG was founded in the year 1970 and is an independent
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD USA web:
Push-In Fittings LF 3000 LF 3200: 3 mm LIQUIfit LF 300 LF 300/ LF 3900 LF 0 PARKER LEGRIS Industrial Connector Systems Products are available from: MARYLAND METRICS P.O. Box 21 Owings Mills, MD 21117 USA
D 162 D 232 D 332 In-line mounting Operating pressure up to 63 bar Nominal flow rate up to 350 l/min
Pressure Filters D 1 D 3 D 33 In-line mounting Operating pressure up to 3 bar Nominal flow rate up to 3 l/min Description Application In the pressure circuits of hydraulic and lubrication systems. Performance
SITRANS F flowmeters. SITRANS F O delta p - Primary differential pressure devices Metering pipe with orifice plate and annular chambers 4/369
and annular chambers Application Suitable for non-corrosive and corrosive gases, vapors and liquids; permissible operating temperature -10 to +00 C. Design Orifice plate with annular chambers consisting
Modular pneumatic valve island
Modular pneumatic valve island Compact design Modular configuration High flexibility Simple exchange of valves (with P shut off, also possible during operation an option) Type 8640 can be combined with
Pressure reducing valve, direct operated
Electric Drives and Controls Table of contents Hydraulics Pressure reducing valve, direct operated Model DR 6 DP Nominal size 6 Series 5X Maximum operating pressure 315 bar (4600 PSI) Maximum flow 60 L/min
3/2 Way Ball Valves KHB3K
/ Way Ball Valves KHBK Model code (also order example) KHBK G / L 0 X A... Designation KHBK = / way ball valve Type of connection G = Whitworth female thread ISO 8 LR = Pipe connection light range DIN
1.4 SCT Temperature sensor
1.4 SCT-150-14-00 Temperature sensor Pressure-proof up to 630 bar Compact construction Rugged steel housing Simple installation -50 C to +125 C 0/4...20 ma Compact construction and high pressure resistance
Rotary Plug Valve BR 23e
PTFE-lined Rotary Plug Valve BR 23e Application: PTFE-lined rotary plug valve for aggressive media, especially due to high demands in chemical plants: Nominal diameter: DN 25, DN 50, DN 80 and NPS1, 2,
Data sheet Compression fittings
Data sheet Compression fittings Regler- und Armaturen-Gesellschaft mbh & Co. KG Obernbreiter Straße 2-18 97340 Marktbreit / Germany Telefon: +49 9332 404-0 Telefax: +49 9332 404-49 E-Mail: info@gok-online.de
Servo-operated 2/2-way solenoid valves Type EV220A
Data sheet Servo-operated 2/2-way solenoid valves Type is a compact servo-operated 2/2-way solenoid valve program, especially designed for use in machines and equipment with limited space. Features and
Microbore Hose, Assemblies & accessories
bar DN2 and DN4 High pressure Microbore hose Technical data Microbore hose The microbore hose assembly, most commonly used to connect to a Minimess test point for pressure testing, has many other diverse
short name: 3WL.IG* technical product sheet created :57 1/6 3-way ball valve F/F PN 63 with pneumatic actuator hard anodized aluminum
with pneumatic actuator hard anodized aluminum technical product sheet short name: 3WL.IG* 3-way ball valve F/F PN 63 E-Box MV Port Modell G Kugel Bauart RE06 RE06 1 1 1/ 1/ 3/" 1 1/ 1 1/ 3/" 1 1/ 1 1/
INOX PrOgram made by eisele
EISELE INOXline Program Stainless steel connection solutions Quality solutions Made by EISELE INOX 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY Over 30 patents, more than 5.000
Axial Piston Variable Pump A10VO
Electric Drives and Controls Hydraulics inear Motion and Assembly Technologies Pneumatics ervice Axial Piston Variable Pump A10VO RA 92703/11.07 1/44 Replaces: 06.07 Data sheet eries 52/53 ize 10...85
connection solutions in stainless steel
connection solutions in stainless steel www.legris.com egris onnectic offers many solutions in stainless steel that are designed for excellent resistance to aggressive / corrosive environments and fluids.
Fittings Metal Push-To- Connect Fittings. We make things MOVE
Fittings Metal Push-To- Connect Fittings We make things MOVE Contents 3 Fittings 4 Product Features 4 Push-In Fittings 4 Features and Benefits 5 How it Works 5 Materials of Construction 5 Fluid 5 Operating
Made of zinc-plated steel (CrVI-free) M3 screw terminal Overpressure safety up to 4,350 psi (300 bar) 1) Male thread
M.3 0166 Diaphragm pressure switches with M3 screw terminal Made of zinc-plated steel (CrVI-free) M3 screw terminal Overpressure safety up to 4,350 psi (300 bar) Adjustment range tolerance at room temperature
4/3- and 3/3-way directional seated valves type VH (R) and VHP
4/3- and 3/3-way directional seated valves type VH (R) and VHP Manually actuated, leakagefree Size 1 Flow Q max = 12 lpm Operating pressure p max = 700 bar Size 2 Flow Q max = 25 lpm Operating pressure
37 flare couplings to ISO
Applications Widely used throughout the world, 37 flare couplings are designed for most medium pressure mobile and stationary applications. These couplings are characterized by easy, compact assembly and
2/2-way Angle-Seat Valve for medium up to +180 C, threaded port connection, DN 15-65
2/2-way Angle-Seat Valve for medium up to +180 C, threaded port connection, DN 15-65 Type 2000 can be combined with High flow rate Long life cycle NC and NO universal s with modular universal accessory
4200/4400 ONE-PIECE NON-SKIVE COUPLINGS
4200/4400 ONE-PIECE NON-SKIVE COUPLINGS 4200/4400 couplings have been engineered to match a wide range of latest generation hose types to provide assemblies that meet the highest global standards. Ferrules
Test Coupling with Ball Check
Test 15 Connection Tread Introduction SMK15 Test Coupling wit Ball Ceck Test Coupling SMK15 Internal Ball Vibration Safety O-ring Spring Sealing at Port Connection Port Connection Fast coupling for Monitoring
Series 810: 2 Way Angle Body Valves: 1/4 to 3 NPT
Series 810: 2 Way Angle Body Valves: 1/4 to 3 NPT FEATURES Compact design, high fl ow rates Visual position indicator standard For temperatures from 22 F to +430 F / -30 C to 221 C Working pressures up
Check valve type ER and EK
Check valve type ER and EK Product documentation Plug-in valve Operating pressure pmax: Flow rate Qmax: 700 bar 120 lpm D 7325 05-2015-1.1 by HAWE Hydraulik SE. The forwarding and reproduction of this
A Complete Range of Adaptors
A Complete Range of Adaptors Adaptors 0143 Page 9-7 0144 BSPT/ Page 9-7 0152 BSPT Page 9-7 0145 Page 9-7 0158 BSPT/ Page 9-7 0117 Page 9-8 0155 Page 9-8 0164 NPT/ Page 9-8 0167 BSPT/NPT Page 9-8 0168 Page
SITRANS F flowmeters. SITRANS F O delta p - Primary differential pressure devices. Orifice plate with annular chambers. 4/358 Siemens FI
Application Dimensional drawings Suitable for non-corrosive and corrosive gases, vapors and liquids; permissible operating temperature -60 to +550 C. Design Two support rings with replaceable orifice disk
Cast Iron Valves. Product Information. It s all at Albion
Cast Iron Valves Product Information It s all at Albion ART 77-78 Cast Iron Ball Valve Flanged Ends Flange Mounting PN16 Only ISO 5211 Direct Mount (Not 200mm) Art 77/78 Plated Brass/Stainless Ball BS
Flanged Ball Valves KHBF / KHMF / KHMFF
Flanged Ball Valves KHBF / KHMF / KHMFF Model code (also order example) KHBF 16 PN040 11141 02 X... Designation KHBF = Block-type ball valve DN 16-25 (steel) KHMF = Sleeve-type ball valve DN 32-50 (steel)
Diaphragm pressure switches up to 42 V with brass housing. Brass housing M3 screw terminal Overpressure safety up to 500 psi (35 bar) 1) Male thread
0167 Diaphragm pressure switches with brass housing Brass housing M3 screw terminal Overpressure safety up to 500 psi (35 bar) Adjustment range tolerance at room temperature Male thread NO : NC : 36 Screw
Valve bank type BNG. Product documentation. Manifold mounting Operating pressure p max : Flow rate Q max : 400 bar 60 lpm D 7788 BNG
Valve bank type BNG Product documentation Manifold mounting Operating pressure p max : Flow rate Q max : 400 bar 60 lpm D 7788 BNG 03-2018-1.0 by HAWE Hydraulik SE. The reproduction and distribution of
RETURN FILTERS. MATERIALS Head: Aluminium alloy Cover & bowl: Polyammide Bypass valve: Polyammide Seals: NBR Nitrile Indicator housing: Brass
COMPONENTS RB MATERIALS Head: Aluminium alloy Cover & bowl: Polyammide Bypass valve: Polyammide Seals: NBR Nitrile Indicator housing: Brass APPLICATION EXAMPLE PRESSURE (ISO 10771-1:2) Max working: 0 kpa
Releasable check valve type HRP
Releasable check valve type HRP Product documentation Relieved, manifold mounting Operating pressure pmax: Flow rate Qmax: 700 bar 400 lpm D 5116 02-2016-1.1 by HAWE Hydraulik SE. The reproduction and
Swivel joints. Product Range
Swivel joints Product Range Basic information Hoses are designed to convey all types of media flexibly from A to B. Depending on the formulation, they must withstand very different pressures, media, consistencies
Product warranty. Quality Policy. The Goal
About the Company SEALEXCEL (INDIA) PVT. LTD. is a fast growing manufacturing company in the field of design, development, production and marketing of high quality valves and fittings for international
Pressure relief valve, direct operated. Type DBD..K. Contents. Features. RE Edition:
Pressure relief valve, direct operated Type DBD..K RE 25715 Edition: 2015-06 Size 2 Component series 2X Maximum operating pressure 420 bar Maximum flow 2 l/min H8070 Features Screw-in cartridge valve 6
Return Line Filter RFM with 4-Hole Mounting
Return Line Filter with 4-Hole Mounting Tank-top mounted versions: up to 850 l/min, up to 10 bar 75 90 150 165 185 195 210 270 330 500 600 661 851 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction
Plug-in connections M3... M7, G 1/8... G 3/4
Plug-in connections M3... M7, G 1/8... G 3/4 Nickel-plated brass, Stainless steel, Plastic, POM Straight threaded plug-in connections Basic fittings, short Basic fittings, long Schott-plug-in connections
10 Pressure/temperature measurement SCPT analogue
10 Pressure/temperature measurement SCPT analogue Pressure/temperature measurement SCPT analogue Robust stainless steel design Response times of 1 ms Capturing of pressure peaks Accuracy ±0.5 % Fast response
VALFONTA SELF-ACTING PRESSURE REDUCING VALVE M1
SELF-ACTING PRESSURE REDUCING VALVE M1 M1-15A-ENG PRESSURE REDUCING VALVE MODEL M1 VALFONTA MAIN CHARACTERISTICS The M1 model is self-operated bellows sealed pressure reducing valve. This series of regulators
2018 High Performance Check Valves for liquid and gaseous media
2018 High Performance Check Valves for liquid and gaseous media Check valves Catalogue 45 Date: 04/2018 WEH - We Engineer Hightech All rights reserved, WEH GmbH 2018. Unauthorized copies are strictly forbidden
2/2-way Globe Valve for media up to +180 C, DN
2/2-way Globe Valve for media up to +180 C, DN 10-100 Compact globe valve version Flange, threaded and welded ports as standard Stainless steel 316L valve body Available with flow direction below and above
SITRANS F flowmeters. SITRANS F R Meters for lubricating oils (distribution of mineral oils) 4/350 Siemens FI Overview
(distribution of mineral oils) Type For custody transfer use Not for custody transfer use Flow rate in l/min (USgpm) Flow rate in l/min (USgpm) Minimum Maximum Minimum Maximum Pistol-grip meter Without
SIKA Flow Switches -1-
SIKA Flow Switches -1- SIKA Flow Switches Reliable Safe Proven! Our tried-and-tested flow monitoring switches are used for two basic purposes: To ensure a minimum flow rate, e.g. of cooling water or lubricating
Ball Valves Gemels GE2 2-WAY HIGH PRESSURE BALL VALVES. Type and way of valve GE2 2-way high pressure ball valves
Stainless Steel Ball Valves Gemels 34.1.1 GE2 2-WAY HIGH PRESSURE BALL VALVES GE2 stainless steel GE2 G 1/2 DN13 4 4 4 4 A B Type and way of valve GE2 2-way high pressure ball valves Valves dimension of
up to size 381 up to PN 0.5 bar up to T = 80 C Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TSE
up to size 381 up to PN 0.5 bar up to T = 80 C Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TSE 1. DESCRIPTION 1.1. GENERAL HYDAC fluid level gauges FSA, fluid level sensors FSK
Change-Over Pressure Filter DFDK
Change-Over Pressure Filter up to 2500 l/min, up to 315 bar 30 60 110 140 160 240 280 330 500 660 1.x 660 2.x 990 2.x 1320 2.x 1320 3.x 2640 3.x 3960 3.x 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING
ZU series. 100 bar universal cylinder. Determine your 100 bar universal cylinder:
ZU series 100 bar universal cylinder Piston Ø 10-100 mm Lengths of stroke at your option (take account of the bend resistance, see page 35) Standard lengths of stroke Round, compact design; black blued
Low Pressure Series KL
Low Pressure 35 Nom. Type Material Max. static working C v value Cross Page bore pressure at 20 C both sides one side both sides one side section [bar] [psi] self sealing self sealing [mm 2 ] 6 KL-006
Table of contents. Valves 141. Check valves 142. with threaded connector 142. with ISO-flange connection (SAE) 144
Table of contents Valves 4 Check valves 4 with threaded connector 4 with ISO-flange connection (SAE) 44 for manifold mounting 48 Needle valves 5 with threaded connector 5 for manifold mounting 5 for manifold
Series 812. TÜV/CE atmospheric discharge safety valves for industrial applications. Air, gases and vapours
TÜV/CE atmospheric discharge safety valves for industrial applications Series 812 4.4 812 Safety valves made of brass, atmospheric discharge, with threaded connections SUITABLE FOR Air, gases and vapours