Hard nylon back-up rings for use with U-seals. I.D. C.S. Part. Part Number. Part. Part TEMPERATURE. -65 to +220 f PRESSURE

List Price. Part Number

162 style tp piston T-Seals combine a resilient sealing ring with a hard, split back-up ring on each side of the sealing element. The assembly installs in a standard o-ring groove. T-Seals are non-spiraling

DMR STYLE MPSB STYLE MPSA-58 STYLE MPSA.

STYLE MPSB Double-acting three piece piston seal. 70 Durometer Nitrile with fabric reinforced Nitrile and Nylon guide rings. The sealing action is effected by the fabric reinforced Nitrile member at the

mmetric Master Seals Catalogue 05/06

mmetric NR Master Seals Catalogue NR Contents Metric Seals Seal Index Piston Double Acting 01 Piston Seals 02 Glide Rings 03 Piston Rings 04 Pneumatic Piston and Seal Piston Single Acting 05 Piston Seals

1501 KUEBEL ST. HARAHAN, LA 70123

style ps1400 glass filled ptfe piston seals The PS1400 seals offer low friction and high strength in a compact double-acting piston seal design. The PTFE seal ring, combined with a rubber energizer, assures

CUPSEALS SUPPLIED BY ORINOCO BEARINGS, LEEDS UK

RUBBER CUPSEALS CUPSEALS NOTE: The cups are center punched if there is no hole size indicated. CUPSEAL INFORMATION BUNA-N RUBBER -40 TO +220 F 0 TO 150 PSI (Piston Cup Type)() - () Lip Ht. 6062 5/8 0.305

POLYPAC - Selemaster SM. Single Acting Compact Rod Seal With Anti-extrusion Ring Material: Rubber + Fabric Reinforced Rubber + POM

Single Acting Compact Rod Seal With Anti-extrusion Ring Material: Rubber + Fabric Reinforced Rubber + POM 85 86 Selemaster SM The rod seal range has been designed to meet the needs of hydraulic equipments

Material Number. 001 Nitrile O-Ring - Nitrile The Americas Australia & NZ Deutsch Australia & NZ Acetal.

Comments Catalogue 001 Nitrile O-Ring - Nitrile 002 FKM O-Ring - FKM 003 PU O-Ring - Polyurethane 004 Silicone O-Ring - MVQ 005 Quad Ring 006 V-Pack NBR HDR 007 Dri-Rod Seal 9000271 - Nitrile EMEA 9400251

Hydraulic seals. A wide range for hydraulic cylinders in off-highway applications. The Power of Knowledge Engineering

Hydraulic seals A wide range for hydraulic cylinders in off-highway applications The Power of Knowledge Engineering Optimizing hydraulic cylinder sealing system performance See what you can achieve with

1501 KUEBEL ST. HARAHAN, LA 70123

style tr rod t-seals T-Seals combine a resilient sealing ring with a hard, split back-up ring on each side of the sealing element. The assembly installs in a standard o-ring groove. T-Seals are non-spiraling

ENVIRO TYPE GREASE HEAD

ENVIRO TYPE GREASE HEAD B & T manufactures the following components compatible with the Enviro Type Grease Head: A) OS9S BRASS UPPER BUSHING B) ENVIRO TYPE UPPER GLAND * C) BOWEN MINI PACKOFF RUBBER A

Miscellaneous Products

Category Seals................................................................................. 1332 Felsted Control Cables................................................................... 1361 Salami

Fluid Filters, Screens/Strainers, Filter Elements & Filter/Surge Chambers

s & /Surge Chambers 84, 845, 846 841010 103-141 0115-01036, 41-1639 41-1650 0115-010630 101-1765 101-097 07-159-1, 07-159- Material s, Strainers, Screens 41-875-X 41-883 41-884 SEE PAGE -6 FOR SURGE BOTTLES

Miscellaneous Products

Category Seals................................................................................. 1318 Felsted Control Cables................................................................... 1350 Thread

Seals On Demand engineered, machined, delivered.

SEALS ON EMAN Seals On emand engineered, machined, delivered. Hercules Seals On emand offers you a wide selection of custom, cost-effective sealing solutions, using advanced rapid-prototype technology.

3 DIAPHRAGM PUMP 1:1 RATIO (METALLIC)

OPERATOR S MANUAL INCLUDING: OPERATION, INSTALLATION & MAINTENANCE 3 DIAPHRAGM PUMP 1:1 RATIO (METALLIC) PD30X-X-X-C PE30X-X-X-C RELEASED: 2-9-05 REVISED: 3-5-07 (REV. 04) READ THIS MANUAL CAREFULLY BEFORE

KITS & TOOLS. regular discounts may not be given on every ITem in this section. kits & tools contents KITS & TOOLS

Contents 383 page O-Ring Assortment Kits 384-394 O-Ring Splice Kits 395 Back-Up Ring Assortment Kits 396-397 Rubber U-Cup Assortment Kit 397 Retainer Ring Assortment Kits 398-399 Cap Plug Assortment Kit

The Cleanest Design. SRC Sanitary Remote-Controlled Valve PD US

The Cleanest Design SRC Sanitary Remote-Controlled Valve PD 60019 US8 2001-10 Application SRC is an air-operated seat valve with a sanitary and flexible design giving a wide field of application, e.g.

A-C Fire Pump Systems FP 2.4 Page 1

ENG. DATA Page 1 February, 1996 Supersedes 5/95 issue FP 2.4 Page 2 A-C Fire Pump Systems 49-139 140-206 54-130 131-256 71-150 10WALC 10WALC 11CLC 11CLC 11CHC 500 500 750 Max Working Pressure (G) 175 psi

Maximum Line Resistance vs. Length of Wire Max. Loop Resistance. Max. Wire Run 18AWG 7x26 Stranded (ft)

. W Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies /" to " NPT / 3/ / 5/ 5/3 Features Molded one-piece solenoid with highly efficient solenoid cartridge and special low wattage coil Increased

SEAL PROFILE INDEX CUSTOM SEALS

Type Prefix Product Image Name Material SEAL PROFILE INDEX CUSTOM SEALS PISTON SEALS DK SERIES (35 PROFILES) NBR,, and Fluorocarbon ROD SEALS DS SERIES (32 PROFILES) Rod s NBR,, and Fluorocarbon WIPER

VERTICAL TURBINE PUMPS SECTION 115. Discharge Head and Accessories

Peerless Pump Company SECTION 115 Page 0.1 May 19, 2005 Application Data Discharge Head and Accessories INDEX DATA & DIMENSIONS ITEM Type C & CHP 4 Type FA, FRA 7 Type S & SHP 5 Type UG 6 Column Flange,

How to select parts to build an MGO series progressive divider valve assembly, with SAE threading.

How to select parts to build an MGO series progressive divider valve assembly, with SAE threading. A simple MGO assembly consists of these basic parts: 1. Inlet 2. Valve sections 3. End section 4. Tie

Kits & Tools ASSORTMENT KITS AND TOOLS

295 Contents Kits & Tools Page O-Ring Assortment Kits 296-305 O-Ring Splice Kits 306 Back-Up Ring Assortment Kits 307 Rubber U-Cup Assortment Kit 308 Retainer Ring Assortment Kits 309-310 Cap Plug Assortment

D and DL Annular Blowout Preventers

D and DL Annular Blowout Preventers In the unique design of the Cameron DL Annular BOP, closing pressure forces the operating piston and pusher plate upward to displace the solid elastomer donut and force

kysmall, Yet Flexible

. kysmall, Yet Flexible ky Application Alfa Laval s Tri-Clover brand range of fractional valves has been designed for applications requiring a secure, sanitary or sterile environment within the food, beverage,

Roller Chase Frame Price List

Roller Chase Frame Price List Eino Products / Diamond Chase 418 South Motor Avenue, ph (626) 969-1821 fax (626) 969-1599 The All NEW Roller Chase Construction Products team has re-designed the Roller Chase

Piston Seal OE Profile

Seal, PTFE ap Seal atalog EPS 530/US The Parker OE profile is a bi-directional piston seal for use in low to medium duty hydraulic applications. The OE profile is a two piece design comprised of a standard

industrial seals catalog

industrial seals catalog COMPLETE S EAL S OLUTIONS FROM A S INGLE S OURCE C E L E B R A T I N G S S U P 1976-2016 I O N E R I O R S E A L S O T L U Established in 1976, HydraPak is built on a commitment

Roller Chase Frame Price List

Roller Chase Frame Price List Eino Products / Diamond Chase 418 South Motor Avenue, ph (626) 969-1821 fax (626) 969-1599 The All NEW Roller Chase Construction Products team has re-designed the Roller Chase

The Right Seal for Every Application

The Right Seal for Every Application O-Rings The O-ring s simple & inexpensive design remains a popular and universal choice for sealing static and dynamic hydraulic systems. It seals efficiently in both

Transeals Pty Ltd. Phone 61 (8) Fax 61 (8) Web

Phone 61 (8) 9451 6011 Fax 61 (8) 9458 5766 Web http://www.transeals.com.au Email seals@transeals.com.au ABN 29 008 902 163 1 Atlas Court, Welshpool, Western Australia, 6106 PO Box 15, Welshpool, Western

Anti-Backlash Life. Without Kerkote TFE Coating inch / (cm) 5 to 10 million (12 to 25 million) With Kerkote TFE

Lead Screw and Nut ssemblies NTG Nut Series ompact size, zero backlash, minimal drag torque. The adjustable NTG Series offers a cost effective anti-backlash assembly for applications requiring precise

66M170-XXX-C RELEASED: REVISED: (REV. 05) 1-1/2" DIAPHRAGM PUMP

OPERATOR S MANUAL INCLUDING: OPERATION, INSTALLATION & MAINTENANCE 1-1/2" DIAPHRAGM PUMP 1:1 RATIO, METALLIC 66M150-XXX-C 66M170-XXX-C RELEASED: 11-3-08 REVISED: 8-25-10 (REV. 05) READ THIS MANUAL CAREFULLY

OPERATOR S MANUAL PD20P-X-X PE20P-X-X RELEASED: REVISED: (REV: N) 2 DIAPHRAGM PUMP 1:1 RATIO (NON-METALLIC)

OPERATOR S MANUAL INCLUDING: OPERATION, INSTALLATION & MAINTENANCE 2 DIAPHRAGM PUMP 1:1 RATIO (NON-METALLIC) PD20P-X-X PE20P-X-X RELEASED: 12-16-02 REVISED: 10-28-16 (REV: N) READ THIS MANUAL CAREFULLY

3 DIAPHRAGM PUMP 1:1 RATIO (METALLIC)

OPERATOR S MANUAL INCLUDING: OPERATION, INSTALLATION & MAINTENANCE 3 DIAPHRAGM PUMP 1:1 RATIO (METALLIC) PD30R-X-X-C PE30R-X-X-C RELEASED: 2-4-05 REVISED: 3-2-07 (REV. 04) READ THIS MANUAL CAREFULLY BEFORE

Compact Seal. DUOPAC rubber fabric reinforced compact seals Type DPS and DPC. Busak+ Shamban

DUOPAC rubber fabric reinforced compact seals Type DPS and DPC Description The compact seals DUOPAC DPS and DPC types are double acting piston seals with integrated guide rings. DUOPAC has been designed

How to select parts to build an MX series progressive divider valve assembly, with NPT threading.

How to select parts to build an MX series progressive divider valve assembly, with NPT threading. A simple MX assembly consists of these basic parts: 1. Inlet 2. Valve sections 3. End section 4. Tie Rods

1-1/2 DIAPHRAGM PUMP 1:1 RATIO (METALLIC)

OPERATOR S MANUAL INCLUDING: OPERATION, INSTALLATION & MAINTENANCE 1-1/2 DIAPHRAGM PUMP 1:1 RATIO (METALLIC) 66615X-X-C RELEASED: 5-31-88 REVISED: 1-2-07 (REV. X) READ THIS MANUAL CAREFULLY BEFORE INSTALLING,

G max rad Ød 2 Ød 3 ØD to to to to

Design Hallite 506 bearing strip is available in three forms: cut rings, spiral lengths and flat coils. Hallite 506 provides an extremely effective, hard wearing and easy to use bearing material. Manufactured

FULL COLOR TAB #6 TC 105

FULL COLOR TAB #6 TC 105 SERIES TC 2-STAGE TELESCOPING CYLINDER CONSTRUCTION FEATURES 3 Bore Sizes: 0.75, 1.50 and 2.50 Strokes up to 60 2-Stage Telescoping Space Saving Design 100% Double Action Heavy-Duty

2M804 Push-Pull Receptacles Protection Caps Ordering Guide for 2M

Push-Pull Receptacles Protection aps Ordering Guide for 2M667-202 Push-Pull Protective aps are available in plug and receptacle versions. Protective caps keep the connector interface dry and clean while

KN-150G-RA/LA KN-180G-RA/LA KN-210G-RA/LA

NO. 74AR-1890 ISSUED: JAN. 24, 1997 FINAL: AUG. 10, 2000 HOSHIZAKI COUNTER SHOWCASE KN-150G-RA/LA PARTS LIST (HA) G-0 DEC. 1996 H-0 DEC. 1997 FINAL MATERIAL ABBREVIATIONS PLASTIC ABS = Acrylonitrile-butadien-styrene

kysmall, Yet Flexible

. kysmall, Yet Flexible ky 650/655 Fractional Valves Application Alfa Laval s Tri-Clover brand range of fractional valves has been designed for applications requiring a secure, sanitary or sterile environment

Design. Dynamic Sealing Face Ød1,ØD max Static Sealing Face Ød2,ØD2, L1 3.2 max 16 max 125 max 140 max

Design Hallite 506 bearing strip is available in three forms: cut rings, spiral lengths and flat coils. Hallite 506 provides an extremely effective, hard wearing and easy to use bearing material. Manufactured

Design Ref. Material Dimensions metr. inch NR IR SBR BR IIR EPDM NBR ECO CR CSM AU, EU HNBR VMQ Q } PVMQ FVMQ FPM ACM FFKM PTFE NBR EPDM FPM VMQ

Design Ref. Material Dimensions metr. inch OR O-Ring Encapsulated FEP-O-ring NR IR SBR BR IIR EPDM ECO CR CSM AU, EU H VMQ Q } PVMQ FVMQ FPM ACM FFKM PTFE Approved compounds: DIN-DVGW, KTW, WRC, FDA, NSF,

The Clamped UNION is the critical element for evaluating pipeline pressure capacity

S-LINE CLMPS PRESSURE RTINGS: CLMP vs. UNION WHICH IS THE CRITICL VLUE TO PPLY? Some manufacturers display pressure ratings of their clamp. But the clamp alone is not the critical value to apply. The Clamped

NTB Series Nut Assembies. Anti-Backlash Life. Without Kerkote TFE Coating inch / (cm) 100 to 125 million (250 to 315 million) With Kerkote TFE

Screw and Nut Assemblies NTB Nut Series For higher load applications. The NTB Series anti-backlash assembly is designed for higher load applications than the ZBX or KHD series units. Using the specially

DP Series Specifications

DP Series Specifications DP-10 Port Dimensions Intake & discharge connection: Polypropylene (PPG) Aluminum (ADC-12) Stainless Steel (316) (6 GPM Max.) 3/8" Female NPT 3/8" Female NPT 3/8" Female NPT DP-15

Polon Piston sealing set

The double-acting piston sealing set profile consists of a PTFE piston sealing ring and an elastomer O-Ring as a preloading element. Profile is particularly suitable for double-acting pistons in control

2/2 3/2 4/2 SERIES Air Operated. General Service Air Operated Valves. Brass Body 1/4" to 2" NPT. Features. Construction.

General Service Valves Brass Body 1/" to 2" NPT 2/2 3/2 /2 Features Unique sealing member isolates pilot air pressure from mainline fluid Variations in pilot air pressure do not affect valve operation

G Housing Price MUKRN-6X12X Part Number. Width $ MUKRN-8X14X

334 MUKRN is an asymmetrical single-acting pneumatic rod seal. Molded in Nitrile, this seal is resistant to water and most oils while maintaining good low-pressure sealing. SL INFORMTION HRULS PRT NUMRS

SERVICE INSTRUCTIONS. Material Pump

TM TM SERVICE INSTRUCTIONS Material Pump 9618 DESCRIPTION Model 9618 is designed for pumping petroleum products from the original container to a desired location. Due to its non-corrosive (aluminum and

1-1/2" DIAPHRAGM PUMP 1:1 Ratio (metallic) with Cone Checks

OPERATOR S MANUAL 670053-X-X INCLUDING: OPERATION, INSTALLATION & MAINTENANCE RELEASED: 3-24-06 REVISED: 5-11-15 (REV. F) 1-1/2" DIAPHRAGM PUMP 1:1 Ratio (metallic) with Cone Checks READ THIS MANUAL CAREFULLY

PE30R-XXX-XXX-C RELEASED: REVISED: (REV. 07) 3" DIAPHRAGM PUMP

OPERATOR S MANUAL INCLUDING: OPERATION, INSTALLATION & MAINTENANCE 3" DIAPHRAGM PUMP 1:1 RATIO (METALLIC) PD30R-XXX-XXX-C PE30R-XXX-XXX-C RELEASED: 2-4-05 REVISED: 11-17-10 (REV. 07) READ THIS MANUAL CAREFULLY

FLUOR-O-FLO Dip Pipes & Spargers. PTFE Lined and Jacketed Steel

MICROMOLD TM ENGINEERED PLASTIC FLUID-FLOW PRODUCTS Product Specifications 5.1-2 FLUOR-O-FLO Dip Pipes & Spargers PTFE Lined and Jacketed Steel CONTENTS PAGE DDF Double d Dip Pipes... 2 DSF Single d Dip

SERVICE KITS PUMP DATA MODEL DESCRIPTION CHART INCLUDING: OPERATION, INSTALLATION & MAINTENANCE RELEASED:

OPERATOR S MANUAL PD10E-X-X INCLUDING: OPERATION, INSTALLATION & MAINTENANCE RELEASED: 6-15-05 REVISED: 7-15-16 (REV. G) 1 DIAPHRAGM PUMP 1:1 RATIO (CONDUCTIVE NON-METALLIC) READ THIS MANUAL CAREFULLY

RB NOK Asymmetrical Profile Rod U-Cup with Double Lip RB asymmetrical C-cup is suited for heavy

RB NOK Asymmetrical Profile Rod U-Cup with Double Lip RB asymmetrical C-cup is suited for heavy duty mobile and stationary service when rod leakage must be kept to a minimum. Double lip design reduces

FREUDENBERG XPRESS CUSTOM-MANUFACTURED SEALS

FREUDENBERG XPRESS FREUDENBERG XPRESS CUSTOM-MANUFACTURED SEALS In today s economic environment Freudenberg Xpress is the clear solution for companies needing precise and speedy results. Short turnaround,

CAST IRON VALVES PRESSURE REDUCING VALVES SERIES

CAST IRON VALVES PRESSURE REDUCING VALVES SERIES NETAFIM CAST IRON VALVES PRESSURE REDUCING VALVES INLINE 0-600MM ANGLE 0-150MM SPECIFICATIONS Manufactured to ISO 9001 Available Valve sizes INLINE Flanged

SEAL & CYLINDER SOURCE, INC. CYLINDERS & COMPONETS CATALOG

SEAL & CYLINDER SOURCE, INC. & COMPONETS CATALOG 1-877-905-7325 ABOUT US Cylinder Source, Inc. is a family owned and operated business with over 25 years of automotive and industrial experience that strives

Description Product group Rod seal

Description Product group Rod seal Design N symmetrical u-ring (05) NI asymmetrical u-ring with inner main sealing lip (07) Profile no. 05/07 Specification E suitable for onesided pressure load Model STI

SERIES MH (NFPA) CYLINDER

MH SERIES TAB 58 Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.002 to improve bearing surface alignment. SERIES MH (NFPA) CYLINDER Reduces cylinder drag and erratic operation

EXPLODED VIEW & PARTS LIST

SECTION 8 EXPLODED VIEW & PARTS LIST ALUMINUM, A300-*AA-****-*** 10 20 30 352 40 322 40 OPTIONAL 311 342 360 323 381 312 321 61 62 70 385 341 383 80 90 100 110 120 130 140 150 160 353 170 355 372 384 330

SERVICE KITS PUMP DATA MODEL DESCRIPTION CHART INCLUDING: OPERATION, INSTALLATION & MAINTENANCE RELEASED:

OPERATOR S MANUAL PD20E-X-X INCLUDING: OPERATION, INSTALLATION & MAINTENANCE RELEASED: 6-16-05 REVISED: 7-15-16 (REV. H) 2 DIAPHRAGM PUMP 1:1 RATIO (CONDUCTIVE NON-METALLIC) READ THIS MANUAL CAREFULLY

AF0465-XX SERVICE KITS GENERAL DESCRIPTION MODEL DESCRIPTION CHART OPERATING AND SAFETY PRECAUTIONS THIS MANUAL COVERS THE FOLLOWING MODELS

OPERATOR S MANUAL INCLUDING: SERVICE KITS, TROUBLESHOOTING, PARTS LIST, DISASSEMBLY & REASSEMBLY. 4-1/4 AIR MOTORS AF044X-XX (4 STROKE) and AF046X-XX (6 STROKE) Also covers 637489 service kits AF044X-XX

/ 3/ 4/ 5/ 5/3 4 Nominal Ambient Temp. Ranges Series Body Material Normal Temperature Range High Ambient Temp Version 8553 Stainless Steel -4 F to 4 F

4.4 W Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies /4" to " NPT / 3/ 4/ 5/ 5/3 Features Molded one-piece solenoid with highly efficient solenoid cartridge and special low wattage coil Increased

MF7. Hydraulic Lift Pumps and Related Components

Page Hydraulic Pumps 2- Hydraulic Pump Repair Kits - Auxiliary Pumps, Radial Pumps, Filters - Covers - Cylinders Hydraulic Quick Couplers MF Pumps and Related MF 2 & Hydraulic Pumps S.0 Hydraulic Pump

Mining Seal Profiles

Mining Seals Mining Seal Profiles INTRODUCTION Ludowici Seals is a business unit of Ludowici Limited, an Australian owned Public Company, established in 1858. LP 301 LP 302 LP 303 The Seals division produces

Commitment To Quality

Commitment To Quality Franklin Electric is committed to provide customers with defect free products through our program of continuous improvement. Quality shall, in every case, take precedence over quantity.

mechanical seals for FRISTAM pumps

O.E.M. mechanical seals for FRISTAM pumps Fristam centrifugal and lobe-rotor pumps are widely utilised in the dairy, beverage and pharmaceutical industries. Stramek offer a wide range of components and

Contents. Hydraulic Cylinder

Hydraulic Cylinder Contents Tie Rod Cylinders of 2500psi series----------------------------------------2~3 Tie Rod Cylinders of 3000psi series----------------------------------------4~5 NFPA interchangeable

1/2" DIAPHRAGM PUMP SERVICE KITS PUMP DATA MODEL DESCRIPTION CHART PD05 P - A X S - X X X

OPERATOR S MANUAL PD05P-XXX-XXX INCLUDING: OPERATION, INSTALLATION & MAINTENANCE RELEASED: 5-15-98 REVISED: 12-5-07 (REV. F) 1/2" DIAPHRAGM PUMP 1:1 RATIO (METALLIC) READ THIS MANUAL CAREFULLY BEFORE INSTALLING,

3" DIAPHRAGM PUMP 1:1 RATIO (METALLIC) READ THIS MANUAL CAREFULLY BEFORE INSTALLING, OPERATING OR SERVICING THIS EQUIPMENT.

OPERATOR S MANUAL PE30X-XXX-XXX-C0S INCLUDING: OPERATION, INSTALLATION & MAINTENANCE RELEASED: 12-12-06 REVISED: 5-11-10 (REV. 03) 3" DIAPHRAGM PUMP 1:1 RATIO (METALLIC) READ THIS MANUAL CAREFULLY BEFORE

% ^ ) 0.55 W Low Power Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies 1/4" to 1" NPT. 2/2 3/2 4/2 5/2 5/3 SERIES Low Power

4.55 Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies /4" to " NT / 3/ 4/ 5/ 5/3 Features Molded one-piece solenoid with highly efficient solenoid cartridge and.55 low wattage coil Standard ambient

LOW PRESSURE FILTERS RFM Series In-Tank Return Line Filters 145 psi up to 224 gpm

LOW PRESSURE FILTERS RFM Series In-Tank Return Line Filters 145 psi up to 4 gpm Technical Specifications Mounting Method 75/9/15/165/185 mounting holes - filter housing D5 Features The compact and lightweight

SERVICE KITS PUMP DATA MODEL DESCRIPTION CHART 6662A3-XXX-C 6662X X X X X C INCLUDING: OPERATION, INSTALLATION & MAINTENANCE RELEASED:

OPERATOR S MANUAL INCLUDING: OPERATION, INSTALLATION & MAINTENANCE RELEASED: 5-3-88 REVISED: 10-28-16 (REV: V) 2 DIAPHRAGM PUMP 1:1 RATIO (NON-METALLIC) READ THIS MANUAL CAREFULLY BEFORE INSTALLING, OPERATING

Features. Machine Screw Actuators Stainless Steel. Must be bolted to lifted member to prevent rotation, except when keyed.

Top Plate - 316 S.S. Must be bolted to lifted member to prevent rotation, except when keyed. Machine Screw Actuators Lifting Screw - 316 S.S. Also available as threaded end or clevis end. Carbon Steel

Cylinders. Series TQ Agricultural Cylinders. Vickers. Nominal Pressure: 2500 psi

Vickers Cylinders Series TQ Agricultural Cylinders Nominal Pressure: 500 psi Released 10 91 113A Series TQ Hydraulic Cylinders Designed for Agricultural Applications Features Working pressure to 500 psi

Keystone Figure 990 and 920 Resilient Seated Butterfly Valves

A split body thin disc valve for high flow and modulating service Figure 990 - Wafer body design Figure 920 - Lugged body design Features General application Figure 990 and 920 valves are used when modulating

FAX FAX

2 seals on eman HERCULES SEALS ON EMAN provies a wie selection of custom, cost effective sealing solutions using avance rapi-prototype technology. The programmable CNC prouction cell can manufacture both

310 Wafer high performance butterfly valve 312 Lugged high performance butterfly valve

310 Wafer high performance butterfly valve 312 Lugged high performance butterfly valve Features and Benefits Uninterrupted gasket surfaces help eliminate problems associated with seat retaining screws

GD N (not shown) No Switches. GD N Grooved 2¹ ₂", 3", 4", 6", 8", 10"

300 PSI WWP UL/FM Butterfly Valves Designed for normally open position monitoring Elastomer Encapsulated Disc Accepts Internal Supervisory Switches Compatible with IPS Pipe 300 PSI/20.7 Bar Non-Shock Cold

Valves. Valves Range 1340 Double Check Valves PN16. Material Specification

Valves Range 1340 Double Check Valves PN16 Material Specification 1340-1/2" - 2" No Component Material Specification 1 Body DZR Brass BS EN 12164 CW602N 2 Check Spool Acetal Acetal 3 Retaining Ring Nylon

Ford Service Saddles and Tapping Sleeves

DQS Inc. Section AA 09/2017 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001:2015 10004466 Ford Service Saddles and Tapping Sleeves Contents Recommended Product Application *Steel *C900/909*** Cast

2 DIAPHRAGM PUMP 1:1 RATIO (NON-METALLIC)

OPERATOR MANUAL INCLUDING: OPERATION, INTALLATION & MAINTENANCE 2 DIAPHRAGM PUMP 1:1 RATIO (NON-METALLIC) PD20P-X-X PE20P-X-X RELEAED: 12-16-02 REVIED: 10-9-10 (REV. K) READ THI MANUAL CAREFULLY BEFORE

Polon Rod sealing set

The single-acting rod sealing set profile consists of a PTFE rod sealing ring and an elastomer O-Ring as a preloading element. The asymmetrical cross-section of the slipper ring is designed for best drag

Section N TOP-FLO Filters and Strainers Stainless Steel Flow Control Equipment for the Food, Beverage, Dairy, Cosmetics, Pharmaceutical, Biotechnology, and Electronics Processing Industries www.toplineonline.com

Waveguide Gaskets CONDUCTIVE ELASTOMERS. Waveguide Gaskets. Table 1 CHO-SEAL 1212 CHO-SEAL 1239 SPECIFICATIONS

CONDUCIVE ELSOMERS Waveguide Gaskets Waveguide Gaskets For effective EMI shielding and pressure sealing for choke cover and contact flanges Chomerics waveguide gaskets ensure low insertion low flange leakage

MODEL H40B (See drawings below for additional parts)

MODEL H0B (See drawings below for additional parts) 0 Blade Bolt /"-NF x /") $0. 0 Hex Head Bolt, /" x " Fully Threaded $0. 0000 Shoulder Bolt, /" x -/" Shoulder Length $. 000 Shoulder Bolt, /" x " Shoulder

APCO SURGE RELIEF ANGLE VALVES (SRA)

BULLETIN 3000 MARCH 2018 APCO SURGE RELIEF ANGLE VALVES (SRA) Design & Construction APCO Surge Relief Angle Valves (SRA) are designed to limit surge pressure and the potential damage to the pump system.

KEYSTONE FIGURES 310/312 K-LOK BUTTERFLY VALVES

310 - Wafer high performance butterfly valve 312 - Lugged high performance butterfly valve FEATURES GENERAL APPLICATION High performance applications such as steam, chill water, water, utility lines, gasoline,

40-501, , ,

-9 Silencer, plastic. -5, -5 Silencer, sintered bronze. - Flow control silencer. -5 Check valves. -5 Hand sliding valves. -5, -5 Quick couplings. -5 Miniature regulator, screw-in type.6-55 Check valves.7-56,

CALCULATION OF BOWL HEAD OR DISCHARGE HEAD

February, 1996 Supersedes 5/95 issue CALCULATION OF BOWL HEAD OR Pressure Gauge hd (Discharge Head) hl (LIFT) hp (Internal Pump Loss) Setting Sump Depth Pump O.A.L. Pumping Water Level hb (Bowl Head) For

OS10 OIL SUCTION AND DELIVERY HOSE

OS10 OIL SUCTION AND DELIVERY HOSE RECOMMENDED FOR OIL, HYDRAULIC AND PETROLEUM BASED FLUID, SUCTION AND DELIVERY WITH UP TO 55% AROMATIC CONTENT. Tube : Black, smooth conductive NBR compound. Reinforcement

MSE. mse.

MSE mse www.gtweed.com MSE SEAL Optimum Sealing Solutions HIGH-PERFORMANCE, LOW-FRICTION SEAL The MSE seal s superior designed dual-lip body gives improved sealing performance. Because our expertise in

The Original Seat Valve

.1 The Original Seat Valve SRC Sanitary Remote-Controlled Valve Application SRC is an air-operated seat valve in a sanitary and flexible design giving a wide field of application, e.g. as a stop valve

Bladder Special Orders 46 Accumulator Selection, Commissioning, Installation & Maintenance 47

Product Catalog Table of Contents Section Subject Page Contact Contacting Accumulators, Inc. Ordering Standard Part Number List 3 Accumulator Ordering Table Special Order Products 5 Product Drawings AccuMight

Hydraulic Sealing Products

Hydraulic Sealing Products Complete family of proven products, backed with full technical support, for General duties Arduous conditions Critical applications Standard & non-standard sizes High Performance

Constructions Suitable for -40 C to -50 C Ambient

Constructions Suitable for -40 C to -50 C Ambient 2, 3 and 4 Way Constructions Available Brass and Stainless Steel Bodies Air and Inert Gas Service AIR/INERT GAS QUALITY STATEMENT FOR LOW AMBIENT VALVES

High Pressure Ball Valves

High Pressure Ball Valves 79 Valve Options Reliable, simple, operation for on-off service Fast acting, one quarter turn fully opens or closes the valve Maximum performance, straight through flow for minimum