22000 MOUNT SERIES. Features. Benefits. Load Range. Low-profile, high capacity mounts for vibration and shock protection.
|
|
|
- Beverly Palmer
- 5 years ago
- Views:
Transcription
1 2 MOUNT SERIES Low-profile, high capacity mounts for vibration and shock protection. Features Fail-safe when used with snubbing washer Axial to radial stiffness of 1:1 Low natural frequency Sturdy, reliable construction Benefits Economical Bonded construction provides constant performance characteristics Overlapping load ranges Load Range 5 sizes with 25 load ratings to 4,56 lbs. per isolator 2 Series mounts are designed to withstand the rigors of heavy-duty vehicular applications, off-the-road equipment, large trucks and construction equipment. The standard neoprene elastomer is resistant to oil, and other materials are available on special order. Applications Truck, bus and marine engines Generators HVAC equipment Electronic equipment Truck cabs Machinery, pumps & compressors NATURAL FREQUENCY 8-18 Hertz TRANSMISSIBILITY AT RESONANCE 8:1 RESILIENT ELEMENT STANDARD MATERIALS WEIGHT Neoprene Sintered metal and cold-rolled steel See dimensional drawings Environmental Data Neoprene elastomer has an operating temperature range of -4 C to +93 C and is resistant to oils, most solvents and ozone. Special elastomers and finishes are available for applications in severe environments. 2
2 2 Mount Series Dimensions 2 MOUNT SERIES Dimensional Drawing (Inches) øa ø B F C D G øe Part # A B C D E F G Weight oz oz oz lb. 7.5 oz lb. 14 oz. 4 Guest Street Brighton, MA (617) Fax (617) BARRY MA 21
3 2 Mount Series Performance Characteristics 221 Series Axial Load vs. Deflection 221 Axial Series Axial Load vs. Deflection Guest Street Brighton, MA (617) Fax (617) BARRY MA 22
4 2 Mount Series Performance Characteristics 223 Series Axial Load vs. Deflection Series Axial Load vs. Deflection Guest Street Brighton, MA (617) Fax (617) BARRY MA 23
5 2 Mount Series (Snubbing Washer & 225) Performance Data & Dimensions 2 MOUNT SERIES SNUBBING WASHER The use of snubbing washers is recommended to ensure proper static and dynamic loading of the isolator and retention of suspended equipment under severe shock environments. ØB Snubbing washers are ordered by separate part numbers as shown in the table below. The standard material is low-carbon steel and the standard finish is zinc plate. Other materials and finishes are available upon request. Please consult with Applications Engineering at 1-8-Barry-MA for more information on the use of snubbing washers. C ØA Size A Dia. B Dia. C Part # Series Axial Load vs. Deflection Guest Street Brighton, MA (617) BARRY MA 24
6 2 Mount Series Static Load Ratings & Installation Data * *Ratings are for general industrial applications. For heavy-duty applications, please call Application Engineering at 1-8-BARRY MA. Snubbing Washer Isolated Equipment Part # (ø A ) R Isolated Structure Mounting Hole Ø"A" Radius "R" (Required) Support Structure Snubbing Washer 4 Guest Street Brighton, MA (617)
INDUSTRIAL CONICAL MOUNTS
INDUSTRIAL CONICAL MOUNTS Features One piece bonded construction High load capacity Low natural frequency Non-linear stiffness Snubbing feature on bottom Benefits Consistent performance Rugged, high load
INDUSTRIAL CONICAL MOUNTS
INDUSTRIAL CONICAL MOUNTS Rugged, high load capacity mounts provide vibration, shock and noise protection A P P L I C A T I O N S Cabs/platforms Engines Generator sets Transmissions Compressors Fuel tanks
CYLINDRICAL STUD MOUNT SERIES
CYLINDRICAL STUD MOUNT SERIES Versatile, low-cost, lightweight stud type mounts for vibration, shock, noise control, and motion accommodation. APPLICATIONS Fans Appliances HVAC equipment Electronic equipment
V MOUNT SERIES. Engine mounts isolate vibration, absorb shock and attenuate noise due to structure-borne vibrations.
V MOUNT SERIES Engine mounts isolate vibration, absorb shock and attenuate noise due to structure-borne vibrations. APPLICATIONS Class 6,7,8 truck engines Bus engines Off-highway vehicle engines On & off-highway
CENTER-BONDED MOUNTS. Center-Bonded Mounts. Page 51 of 124
Page 51 of 124 Center-Bonded Mounts Featuring: CB-1100 Series CB-1180 Series CBA Series CBA-50 Series STA Series Safetied Tubeform Series LORD Center-Bonded Mounts isolate vibration, control shock and
Table of Contents. Technical Section Elastomer Information Engineering Analysis... 11
Table of Contents A Technical Section... 2-9 Elastomer Information... 1 Engineering Analysis... 11 Fail-Safe Compression Mounts... 123 Compression Mounts... 148 Dome Mounts... 19 Cupmounts... 214 Stable-Flex
RING & BUSHING MOUNTS
RING & BUSHING MOUNTS Ring and bushing isolators are versatile, low cost mounts that can satisfy many vibration control problems. They are rugged, low-cost isolators easily installed. Ring and bushing
USING STANDARD ISOLATORS TO CONTROL UNWANTED MACHINE VIBRATION
USING STANDARD ISOLATORS TO CONTROL UNWANTED MACHINE VIBRATION From small medical pumps to large diesel engines, vibration is unavoidable and dangerous if left unchecked in rotating and oscillating machinery.
SMAC ISOLATORS CATALOGUE
SMAC ISOLATORS CATALOGUE Building together future solutions Indice F Overview SMAC is a dynamic company specializing in the analysis, design and manufacturing of complex rubber parts for demanding fields
Toll Free: 877/ Fax: 814/
Low Profile Avionics Mounts (AM ) Low profile, all-direction vibration and shock mounts for avionics equipment and other sensitive devices Lord Corporation low profile Avionics Mounts (AM ) set the standard
Buffer elements 1109
Buffer elements 1109 Technical information for rubber-metal buffers Our rubber-metal buffers are simple and cost-efficient standard units for elastic mounting. They are ideally suited for compressive and
Vibration and Shock Isolation Products
2215 Lyons Road Miamisburg, Ohio 45342-4465 Phone: 937-438-11 Fax: 937-438-219 Email: tpc@novibes.com Website: www.novibes.com Order online at NoVibes.com Tech Products Corporation - Vibration and Shock
WIRE ROPE ISOLATORS C/CB SERIES APPLICATIONS HELICAL WIRE ROPE ISOLATORS FEATURES & BENEFITS
0.03-1.50 APPLICATIONS HELICAL The C/CB Series isolators are made up of helical, stranded-wire rope held with rugged metal retaining bars. This design provides excellent shock and vibration isolation in
TECHNICAL CHARACTERISTICS APPLICATIONS
TP NTI VIRTION MOUNTS M-MNOUHO&Reg; TP type anti vibration mounts have been designed to provide effective vibration isolation of medium to high frequency applications in a variety of industrial machinery
ASSEMBLIES. Table of Contents C BERG
ASSEMBLIES Table of Contents GEARBOXES - WORM WHEEL AND HELICAL GEARS TECHNICAL DATA - SPEED REDUCERS..................... C 2 WORM & WORM WHEEL GEARS SHAFT SIZE - 1/8, 3/16 AND 1/4......................
PLATEFORM MOUNTS Page 19 of 124
PLATEFORM MOUNTS Page 19 of 124 Plateform Mounts Featuring: Plateform Mounts Heavy-Duty Plateform Mounts Multiplane Mounts LORD Plateform Mounts provide effective isolation against vibration. The contour
Trelleborg Industrial Antivibration Systems. A safe choice all over the World
Trelleborg Industrial ntivibration Systems safe choice all over the World Trelleborg Industrial VS global supply and manufacturing of Novibra and Metalastik antivibration solutions. uide when choosing
ANTI VIBRATION MOUNTS
ANTI VIBRATION MOUNTS Insulators The insulators, because of their electrically insulating property, are used for the bearing of blasts, airconditioning units and fans. The fact that they can be anchored
Style 234 Restrained Flexible Single-Gasket Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date
Victaulic Bolted Split-Sleeve Products (VBSP) Style 234 carbon steel couplings (formerly Depend-O-Lok Air/FluidMaster) are single-arch couplings that are commonly used in buried or exposed steel pipe applications
MORFLEX COUPLINGS Double MORFLEX Series CC Hub and Block Assemblies Round steel flanges
MORFLEX COUPLINGS The MORFLEX coupling should be installed where considerable dimensional misalignment may result, or is expected. It also cushions shock loads and absorbs vibration. The MORFLEX coupling
Spring Mounts Damped Type To 200 lbs.
Spring Mounts Damped Type To 200 lbs. CO MP O NE NTS MATERIAL: Base Plate Mild Steel Spring igh-tensile Steel - Phosphated & Dyed Black End Cap Cast Light Alloy STAINLESS STEEL MES FOR LOADS OF 60 TO 200
Anti Vibration Mounts
utomation Control Equipment nti Vibration Isolation roducts Vibration Technology 2 Overview Hard ell 3 oft ell 6 Type CQ-E- 0 Type -Q 3 Universal 6 Cones 20 Height djuster 30 Hard ell 3 Hard ell which
Plateform Mounts Heavy Duty Plateform Mounts Multiplane Mounts
Featuring: Plateform Mounts Heavy Duty Plateform Mounts Multiplane Mounts Lord Plateform Mounts provide effective isolation against vibration. The contour of the flexing element was developed to provide
Bearing Fundamentals. Timken Training
Bearing Fundamentals Timken Training AGENDA Basic Bearing Design Ball Bearings Cylindrical Roller Bearings (CRB) Spherical Roller Bearings (SRB) Tapered Roller Bearings (TRB) 2 BASIC BEARING DESIGN Anti-Friction
Lightweight. Geislinger Gesilco
Lightweight Geislinger Gesilco The Geislinger Gesilco product range is based on more than 20 years of experience in developing fibre composite couplings and shafts. The maintenance-free composite membranes
Ultran Cylinders. Ultran Band Rodless Cylinders. Ultran High Load Slides. Ultran Application Checklist. Ultran High Load Electric Slides
5.3-5.4 5.5-5.12 5.13-5.23 5.24-5.32 Ultran Band Rodless 5.33-5.43 Ultran Application Checklist 5.44 Electric 5.45-5.53 Ultran Ultran Bimba Ultran SPACE SAVINGS OF ALMOST 50% IN MOST MODELS Two Models:
50 years of Reliable Field History
Coupling Comments The No Maintenance, Easy Assembly, Resilient Coupling with High Angular Misalignment up to 10 degrees Center Assembly 70 Deg. Neoprene Rubber in Compression Grade 5 Bolts Steel Flanges
Rubber Metal antivibration mounts
M Mecanocaucho S engine anti vibration mounts are antivibration elements which work the rubber in shear and compression with an optimal ratio of stiffness and horizontal stability. These engine mounts
FlexiCase Rotary Seals Introduction
FlexiCase Rotary Seals Introduction Contents Engineering................. -3 Materials................... -6 Product Offering............. -7 What Is a FlexiCase and How Does It Work? FlexiCase FlexiSeal
Bearings and Spacers
Bearings and Spacers Section Contents Ball Bearings P4...Page 12 2 Bronze Bearings...Page 12 3 Moulded Bearings...Page 12 4 Bearing Pre load Washers...Page 12 Bearing Spacers...Page 12 6 Technical Information...Page
DYNAFLEX ELASTOMERIC FLEXIBLE COUPLINGS
Page 103 of 124 Dynaflex LCR Series Couplings Rated: 4 to 135 hp at 2000 rpm LORD Dynaflex LCR Series Couplings are ring-type couplings developed to overcome numerous torsional problems associated with
...vibration isolation. Miscellaneous Parts
...vibration isolation Parts Anti-vibration Mounts engine l P2040 Rubber on silver zinc plated steel. Tecnical Notes Wit a bell-like base tis unit is suitable for supporting most applications, suc as engine
Standard Products Guide
Standard Products Guide 2015 MADE IN THE U.S.A. Sorbothane Standard Products Guide Table of Contents» Introduction 3» Selecting An Isolator 4» Durometer & Shape Factor 5» Bushings & Washers 6-7» Hemispheres
The perfect solution for boat propulsion.
The perfect solution for boat propulsion. A propulsion system wich reduces noise up to 90% Simplifies engine/gearbox installations remarkably Alignment procedure can be performed with measure by the eye
Vibration Control Technology Industry. Catalogue 2012
Vibration Control Technology Industry Catalogue 212 The information in this product catalogue is based on the experience gained in decades of research on the development and manufacture of components for
Bell-house Mounted Arrangement. Highly Flexible K Coupling
Bell-house Mounted Arrangement. Highly Flexible K Coupling K Couplings for bell-house mounted arrangements are the only coupling type providing a blind assembly connection. They are specially designed
CLASSICA Imperial pitch - CD MXL - XL - L - H - XH SYNCHRONOUS BELT - - CHD CD APPLICATIONS KEY FEATURES & BENEFITS BELT MATERIAL.
CLASSICA Imperial pitch - CD Performance index The CLASSICA synchronous belt, being designed with imperial pitch, is a valid and economical alternative solution in low/medium torque transmission systems.
General information on radial seals
170 General information on radial seals Radial seals is the common name for shaft seals, which seal against a rotating shaft using an elastic and resilient lip of rubber or PTFE. The lip in turn is either
20EVP-A SERIES. Vertical In-Line Self-Priming Centrifugal Pumps for Petroleums and Solvents. Marlow Pumps. Marlow Pumps.
2EVP-A SERIES Vertical In-Line Self-Priming Centrifugal Pumps for Petroleums and Solvents PUMP: Heavy-duty cast iron construction, with 2 NPT female threaded, in-line suction and discharge ports. This
BUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
Specialists in Anti-Vibration Mountings and Rubber Engineering Components
Specialists in Anti-Vibration Mountings and Rubber Engineering Components Index Mounting Selection Page 1 Cylindrical Bobbins Page 2-7 Buffers & Bump Stops Page 8-11 Instrument & General Purpose Page 12-13
Avseal II Blind Sealing Plug
Avseal II Blind Sealing lug Since 1922 Since 1936 2010 Avseal II The new range of Avseal II blind sealing plugs is unique in the efficient sealing performance provided in low- and high-pressure hole sealing
TUBUS-Series Type TA
TUBUS-Series Type TA Profile Damper Axial Damping The profile damper type TA from the innovative ACE TUBUS series is a maintenancefree, self-contained damping element made from a special Co-Polyester Elastomer.
TUBUS-Series Type TA
TUBUS-Series Type TA Profi le Damper Axial Damping 76 The profile damper type TA from the innovative ACE TUBUS series is a maintenance-free, self-contained damping element made from a special Co-Polyester
RESILIENT SEATED BUTTERFLY VALVES
DESIGN FEATURES APPLICATIONS: HVAC Chemical/Petrochemical Processing Food and Beverage Industry Power and Utilities Pulp and Paper Industry Stem Configuration: Gives positive attachment for handles or
Tilting Pad Journal Bearings
Tilting Pad Journal Bearings Types W140 and W141 Diameter Range 40 355 mm Standard GTW Tilting Pad Journal Bearings type W140 with 4-pads and W141 with 5-pads. These bearings are used in high speed machines,
PROPULSION EQUIPMENT DOCUMENTATION SHEET. Propulsion Equipment
PROPULSION EQUIPMENT General Vessels like rescue boats, patrol boats and anchor handling boats have to show 100 percent performance, even in the most extreme conditions. These so called s pecial seagoing
TORQUE HTD - CMT MUSTANG 8M - 14M SYNCHRONOUS BELT - CHD CMT APPLICATIONS KEY FEATURES & BENEFITS BELT MATERIAL.
TORQUE HTD - CMT Performance index These heavy-duty synchronous belts are specifically designed for high torque applications at low speed. TORQUE belts are among the best performing HTD profiled belts
D51 D61 D71 D91 Series
MTH PUMPS D51 D61 D71 D91 Series Page D-1 Capacities to 24 GPM Heads to 36 Feet Horizontal Close Coupled Close-coupled centrifugal pumps from MTH provide economical performance up to 24 GPM applications
Your drive is our strength. Your strength is our drive. ARCUSAFLEX -VSK Highly torsionally fl exible coupling for drive shafts
Your drive is our strength. Your strength is our drive. ARCUSAFLEX -VSK Highly torsionally fl exible for drive shafts Contents General technical description... 3 Page Design and function / aterials...
EB and ER Construction
EB and ER Construction EB Element EB elements are suited to slow speed applications having moderate starting and stopping loads. They are used as slip clutches and tension brakes for lighter torque and
Pads, LeveLers & Machine Mounts. Pads, LeveLers & Machine Mounts
Pads, LeveLers & Machine Mounts Pads, LeveLers & Machine Mounts Fabcel Pads High Quality Molded Elastomer Fabcel Pads Fabcel is a high quality elastomer molded into scientifically designed vibration and
MINIMIZING VIBRATION ENGINE & MACHINERY MOUNTS. (Imperial) MAXImounts
MINIMIZING VIBRATION ENGINE & MACHINERY MOUNTS (Imperial) MAXImounts The IsoFlex MAXImount System: The IsoFlex MAXImount System designs each mount for maximum vibration isolation. The IsoFlex design improves
GLOSSARY. Air Actuator
GLOSSARY A Air Actuator A device which induces action or motion with compressed air being the medium through which the power is transmitted, similar in function to a hydraulic cylinder. Air Spring Assembly
New mounts : VIBSOL Cushions for pipe Adjustable height machinery mount V47 METAL MOUNTINGS VIBRACHOC RANGE
New mounts : VIBSOL Cushions for pipe Adjustable height machinery mount V47 METAL MOUNTINGS VIBRACHOC RANGE METAL MOUNTINGS VIBRACHOC RANGE CONTENTS I STEEL MOUNTINGS II VIBRATION AND SHOCK GENERAL III
RUBBER BELLOWS general
RUBBER BELLOWS general Our rubber compensators are made from various elastomers and provide the flexible element in pipework that is indispensable in todays technically advanced plant and machinery installations.
ITT. Goulds Pumps. Marlow Series 20EVP. Engineered for life. Commercial Water
Goulds Pumps Marlow Series 2EVP Vertical In-Line Self-Priming Centrifugal Pumps for Petroleums and Solvents STANDARD UNIT INCLUDES: Goulds Pumps is a brand of ITT Corporation. www.goulds.com Engineered
BLOWER PARTS & ACCESSORIES
BRACKET KITS NEW! BOLT ON BEARING BRACKET Replacement Bearing Brackets for Lau Belt Drive Blower (see Page 22). 9 Blower 054866-01 10 Blower 054867-01 11 Blower 054868-01 12 Blower 054869-01 SERVICE TIP:
Optical Tables and Vibration Control. ND01 Series. Dimensions [in. (mm)] Model (Metric) A B ND01-A (M-ND01-A) 2.00 (50.0) 1.00 (25.
![Optical Tables and Vibration Control. ND01 Series. Dimensions [in. (mm)] Model (Metric) A B ND01-A (M-ND01-A) 2.00 (50.0) 1.00 (25.](/thumbs/87/97332469.jpg "Optical Tables and Vibration Control. ND01 Series. Dimensions [in. (mm)] Model (Metric) A B ND01-A (M-ND01-A) 2.00 (50.0) 1.00 (25.")
1 NewDamp Constant Natural Frequency Elastomeric Isolators ND1 Series ND1- supports up to 2 lbs. and provides excellent CNF (constant natural frequency) characteristics: the vertical natural frequency
Composite Long Shaft Coupling Design for Cooling Towers
Composite Long Shaft Coupling Design for Cooling Towers Junwoo Bae 1,#, JongHun Kang 2, HyoungWoo Lee 2, Seungkeun Jeong 1 and SooKeun Park 3,* 1 JAC Coupling Co., Ltd., Busan, South Korea. 2 Department
Ball Screws Inch Series
Ball Screws Inch Series BALL SCREWS Table of Contents Description Page Product Overview................................ 38 Precision Rolled Ball Screws Inch Series......... 42 Visual Product Reference
White Paper. Stator Coupling Model Analysis By Johan Ihsan Mahmood Motion Control Products Division, Avago Technologies. Abstract. 1.
Stator Coupling Model Analysis By Johan Ihsan Mahmood Motion Control Products Division, Avago Technologies White Paper Abstract In this study, finite element analysis was used to optimize the design of
EFQT/EFQU. EBARA Self Priming Trash Pump. Contents Project: Model: Chk d: Date:
Contents Section Page Model Designation 2 Features 3 Standard Specifications 5 Specifications 6 Selection Chart 7 Suction Speed Flow Chart 9 Performance Curves 10 Dimension Drawings 20 Model Designation
ROTARY MOTION CONTROL
ROTARY MOTION ONTROL Technical Data Sheet Mechanical Torque Limiter The trend in industry is to design and incorporate more automation into production processes. Machines are becoming more accurate, requiring
1) Retractable nipple with centering 2) Retractable nipple with equalizer 3) Retractable nipple without centering
The critical contrasts between "stable clamping" and the required "flexibility for heat expansion" have been ideally solved with the Stark zero point mounting system. There are 3 different retraction nipples:
Trelleborg Industrial Antivibration Systems
Trelleborg Industrial ntivibration Systems safe choice all over the World Trelleborg Industrial VS global supply and manufacturing of Novibra and Metalastik antivibration solutions. uide when choosing
Aquadrive Antivibration System
Aquadrive Antivibn System GKN Land Systems Aftermarkets & Services Headquarters: GKN Service International GmbH Nussbaumweg 19 21 51503 Rösrath, Germany www.gknservice.com www.aquadrive.com Art. No. 190213_10/2011
BRB ANTI VIBRATION MOUNTS
R NTI VIRTION MOUNTS M Mecanocaucho R aptive anti vibration mounts are anti vibration elements which work the rubber in shear and compression. Their high profile rubber sections produce larger deflections,
Elastomer Products for Energy Control
TUBUS Bumpers Elastomer Products for Energy Control Outperform Rubber, Urethane and Coiled Steel ACE Controls Inc. Innovation in Deceleration and Motion Control ISO 9001 Certified 01/09(R) Revised 12/10
Linear Axes Technical Data Summary
components Technical Data Summary Pneumatic Axes Electrical Axes LM 6 P LM 8 P LM 8 PV LM 10 P LM 6 PE LM 8 PE LM 8 PEV LM 10 PE Standard stroke lengths [mm]: h 0-150 Overall length [mm]: L 408 468 468
ANTI-VIBRATION MOUNTS
SECTION 21 - ANTI-VIBRATION MOUNTS ANTI-VIBRATION MOUNTS Male/Male Thread Anti-Vibration Mount... 21-1 Male/Female Thread Anti-Vibration Mount... 21-2 Female/Female Thread Anti-Vibration Mount... 21-3
ARCUSAFLEX-VSK. Highly torsionally fl exible coupling for drive shafts. Your drive is our strength. Your strength is our drive.
ARCUSAFLEX-VSK Highly torsionally fl exible coupling for drive shafts Your drive is our strength. Your strength is our drive. Contents Page General technical description... 3 Design and function / Materials...
SLCX ATEX LONG CASED AXIAL FLOW FAN PLEASE CONTACT AERAULIQA DIRECLTY FOR A SPECIFIC FAN SELECTION ACCESSORIES APPLICATION FEATURES & BENEFITS
ATEX LOG ASE AXAL FLOW FA ALATO ATEX ucted Axial Flow Fans suitable to exhaust/supply air in presence of chemical processes, water and sewage treatment, material and gas waste, dust and paint extraction,
AUTOFLEX DISC COUPLINGS
AUTOFLEX DISC COUPLINGS Contents & Coupling Application Configurations Coupling Type Typical Application Series Page No Introduction - Disc Configuration 2 Coupling Selection 3 & 4 Service Factors High
BEARING, SHAFTS, CLAMPS, COLLARS & HUBS
BEARING, SHAFTS, CLAMPS, COLLARS & HUBS Table of Contents HUBS Gear, Dial and Sprocket Assembies - Tech Info.....MI 2 Phase Adjustable Hub........................MI 3 Quick-2-Lock Hub..........................MI
Vacuum Pads for Heavy Duty Material Handling thread Lateral vacuum entry. ø50 ø63 ø80 ø100 ø K K K K K K.
Pads for Heavy Duty Material Handling Series T/ Ideal for heavy weight material or objects with a large surface area Examples: CRT, Car body Pad diameters Pad materials Variations Style Series T Vertical
Version 7.0. Mitsubishi. TD04 Type Turbos
Mitsubishi TD04 Type Turbos Component Parts Common qty in Turbo 1401-404-750 1401-404-751 1401-404-752 1401-404-753 1401-404-754 1401-404-770 1401-404-771 TD04 Type Repair Parts & Service Kits All parts
Four armature sizes. Simple. Powerful. Controllable.
One of the keys to the Warner Electric tensioning system is the Electro Disc tension brake. Electro Disc brake systems are capable of continuous slip from full roll to core diameter while providing outstandingly
Design Innovative, robust construction, straight section eliminated before and after curve. Features Speed: Up to 70 meters per minute
The new modular radius belt is available in different widths with a closed-top surface capable of handling a variety of package sizes, types and configurations including delicate products and applications
Polon Piston sealing set
The double-acting piston sealing set profile consists of a PTFE piston sealing ring and an elastomer O-Ring as a preloading element. Profile is particularly suitable for double-acting pistons in control
Installation and Operating Instructions for ROBA -ES couplings Type 940. _. _ Sizes 14-48
Table of contents: Please read and observe this Operating Instruction carefully. A possible malfunction or failure of the clutch and damage may be caused by not observing it. Page 1: - Table of contents
DYNAFLEX ELASTOMERIC FLEXIBLE COUPLINGS. Dynaflex Elastomeric Flexible Couplings.
Page 87 of 124 Powertrain component life is determined by the load spectrum each component will experience during the machine s service life. Reciprocating engines, such as spark-ignited gasoline and compression-ignited
Keystone K-LOK High Performance Butterfly Valves Sizes DN Class 150 and 300
K-LOK Figure 360, 362, 364 ASME Class 150 K-LOK Figure 370, 372, 374 ASME Class 300 Features General applications Marine services Hydrocarbon processing Chemical / Petrochemical processing Purified gas
FOR EVERYTHING ENCLOSURE
FOR EVERYTHING ENCLOSURE PVC EDGE PROTECTOR Provies excellent protection for steel eges 9 styles available Simple to install SEE PAGES 498-499 DRAWER SLIDES Available in light, meium an heavy uty Full
61W - Wafer style resilient seated butterfly valves 61L - Lugged style resilient seated butterfly valves
61W - Wafer style resilient seated butterfly valves 61L - Lugged style resilient seated butterfly valves Features Rounded polished disc edge gives full concentric sealing, lower torques, longer seat life
and zero rpm. Maximum recommended pressure is 110 psi (7.6 bar). Adjustment for speed is explained under Selection Procedure.
CB Construction Single Flange Dual Flange The type CB element assembly is designed and built to provide dependable clutch or brake service in the most exacting industrial applications. It is suited to
TLC. T Series Couplings. Product Description. Design Features
TLC A Stainless Steel, Flexible Membranes B Overload Collars C Cartridge Transmission Unit D Anti-Fly Feature E Anti-Corrosion Treatment F Hubs with Puller Holes G Externally Wrenched Bolts H Large Shaft
MARINE FENDERS Cell or Cone Type HCF SERIES
MARINE FENDERS Cell or Cone Type HCF SERIES 1. GENERAL INTRODUCTION With successful service record dating back to 1972, HERCULES Elastomeric Energy Absorbing Devices (eg HVB) have been widely used worldwide
Chain return components
42 HD Polyethylene High Density Self-lubricating ROLLER 12303V 12303N 12307V 12307N 128V 128N 128V 128N 12 12 Cod. 12304N Cod. 12303V Cod. 12863N ROLLER 12895V 12895N 12896V 12896N 12897V 12897N 12862V
Keystone knife gate valves Figure OS1700
Bi-directional zero leakage ASME Class 150 rated knife gate valve. Designed for the rigors of high pressure slurry and oil sands applications Features General application The OS1700 has many features to
ZPT VACUUM PADS VERTICAL ENTRY WITHOUT BUFFER PAD DIAMETERS Ø20, Ø25, Ø32
6.14 VACUUM ZPT VACUUM PADS VERTICAL ENTR WITHOUT BUFFER T ECHNICAL SPECIFICATIONS Vacuum entry Mounting Vertical type Use connection for vacuum entry Pad type Flat type Flat with rib Deep type 2, 4, 6,
Company Profile.
SPUR OVOID GEARBOX Company Profile MOONS' is one of the largest integrated manufacturers of motion control products within China, using internationally proven scientific management tools along with the
Microcellular polyurethane as steering coupling element
Microcellular polyurethane as steering coupling element Material specific properties of solutions based on Cellasto -Elastolit-X composite structures Contents Cellasto material specific properties: Classification,
BIFURCATED AXIAL FANS
BFURATE AXAL FAS SB (YL) ALATO SB (O) Bifurcated axial fans suitable to move air in hostile applications, for example in case of dust and chemical substances in heavy industrial, boiler houses, corrosive
VALVES & CONTROLS KEYSTONE BUTTERFLY VALVES RESILIENT SEATED SERIES 61, 14" TO 24" 61W - Wafer style and 61L - Lugged style FEATURES
VALVES & CONTROLS KEYSTONE BUTTERFLY VALVES RESILIENT SEATED 61W - Wafer style and 61L - Lugged style FEATURES Rounded polished disc edge gives full concentric sealing, lower torques, longer seat life
MASON INDUSTRIES, Inc.
DYNAMIC NATURAL FREQUENCY (Hertz) 30 20 10 8 6 MASON INDUSTRIES, Inc. Manufacturers of Vibration Control Products 350 Rabro Drive 2101 W. Crescent Ave., Suite D Hauppauge, NY 11788 Anaheim, CA 92801 631/348-0282
SPIRACON. ROLLER SCREWS SPIRACON PRODUCT CATALOGUE
SPIRACON ROLLER SCREWS PRODUCT CATALOGUE SPIRACON www.powerjacks.com TOTAL CAPABILITY IN ACTUATION Power Jacks is a world leader and pace-setter in the field of mechanical linear actuation and power transmission,
TYPE 2100 ELASTOMER BELLOWS UNITIZED SEAL Technical Specification
A Face/Primary Ring B Seat/Mating Ring C Drive Band D Bellows E Spring D E B C A Product Description The Type 2100 is a compact, unitized, single spring, elastomer bellows mechanical seal. For centrifugal,
High Temperature Air-Cooled Hot Oil Pumps
Bulletin C 1.4.42 Dean Pump Division High Temperature Air-Cooled Hot Oil Pumps No Water Cooling Required RA296 RA3146 RA3186 RA296 The smaller, foot mounted economy version of the air-cooled RA series
MW50 HYDRAULIC MOTORS
MW50 HYDRAULIC MOTORS T E C H N I C A L C A T A L O G CHARACTERISTICS Motor inertia 1 kg.m² H D S M W 5 0 1 2 3 4 1 2 3 4 1 2 3 3 4 1 2 3 4 5 cm³/tr [cu.in/rev.] Theoretical torque at 100 bar at 1000 SI