HKK CURVED JAW COUPLINGS HITEX COUPLINGS
|
|
- Kimberly Cummings
- 5 years ago
- Views:
Transcription
1 HKK CURVE JAW COUPINGS HITEX COUPINGS
2 CURVE JAW COUPINGS Coupling selection The HKK jaw coupling selection shoul be mae accoring to IN Proper imensioning of the coupling shoul be one to ensure that the permissible coupling loa never is exceee in any operating conition. Verify the rate torque of the application (T N ) by the following formula: T N = 9550 P (kw) n (rpm) Specifications b Torque range Nm b Torsionally flexible b Failsafe b Vibration reucing b Axial plug-in The nominal torque of the coupling (T KN ) shoul be equal or higher to the application torque taking the ambient tempature in consieration. T KN T N S t The maximum torque of the coupling (T KNmax ) shoul be equal or higher to the peak torque (T S ) multiplie by the servicefactors for temperature (S t ), starting frequency (S Z ) an shocks (S U ). T Kmax T S S t S Z S U The vibratory torque which the coupling (T KW ) can bear shoul be equal or higher to the vibratory torque of the application(t W ) multiplie by the Servicefactor for temperature S t. T KW T W S t Servicefactors Servicefactor for starting frequency S Z Starting frequency per hour S Z,0,2,4,6 Servicefactor for temperature S t Tempature range -30 C +30 C +40 C +60 C +80 C S t,0,2,4,6 Servicefactor for shocks S U Gentle shock loa,5 Meium shock loa,8 Heavy shock loa 2,5 Shaft-hub connection The shaft-hub connection shoul always be verifie by the customer. The maximum torque of the rive shoul always be lower than the torque which the shaft-hub connection can bear. In case of keyway connection it is recommene to verify the permissible surface pressure of the coupling hub. 2
3 Rate Torque Technical ata 92 Shore-A 95/98 Shore-A 64 Shore- Max. spee Max. isplacements (92 an 98 Sh-A) Rate T KN Max. T KN max Vibratory T KW Rate T KN Max. T KN max Vibratory T KW Rate T KN Max. T KN max Vibratory T KW V=30 m/s iron V=40 m/s steel Axial Δka (mm) Raial Δkr (mm) Angular Δkw ( ) , ,2 0,20, ,4 0,22 0, ,5 0,25 0, ,8 0,28, ,0 0,32, , 0,36, ,2 0,38, ,6 0,42, ,0 0,48, ,4 0,50, ,8 0,52, ,2 0,55, ,6 0,60,3 Stanar programme cylinrical finish bore [mm] H7 keyway to IN 6885 sheet [JS9] with threa for setscrew Material Unbore Ø8 Ø9 Ø0 Ø Ø2 Ø4 Ø5 Ø6 Ø7 Ø8 Ø9 Ø20 Ø22 Ø24 Ø25 Ø26 Ø28 Ø30 Ø32 Ø35 Ø38 Ø40 Ø42 Ø45 Ø48 Ø50 Ø55 Ø60 Ø65 Ø70 Ø75 Ø80 Ø85 Ø90 Ø00 9 A- St 24 A- St 28 A- St 38 GG St 42 GG St 48 GG St 55 GG St 65 GG St 75 GG St 90 GG St HKK CURVE JAW COUPINGS 3
4 CURVE JAW COUPINGS a G t S 3 S S HKK Aluminium (Al-) Hub type Spier Rate torque imensions (mm) Threa for setscrews 92 Sh-A 98 Sh-A 64 Sh- Finish bore (min-max) S S G t T A a a a M M ,5 M
5 a 2 G t 2 2 S 3 S S HKK Cast iron (GJ) Hub type Spier Rate torque imensions (mm) Threa for setscrews 92 Sh-A 98 Sh-A 64 Sh- Finish bore (min-max) S S G t T A a a a a M M M M M M M Spier HKK Noular iron (GJS) Hub type Rate torque imensions (mm) Threa for setscrews 92 Sh-A 98 Sh-A 64 Sh- Finish bore (min-max) S S G t T A M ,5 M M HKK CURVE JAW COUPINGS 5
6 CURVE JAW COUPINGS t G S S 2 S HKK Steel (St) Hub type Spier Rate torque imensions (mm) Threa for setscrews 92 Sh-A 98 Sh-A 64 Sh- Finish bore (min-max) S S G t T A 9 a M a M a ,5 M M M M M M M M
7 T T S 3 S S HKK-T Taper clamping bush imensions (mm) Fixing screw for taper bush Taper bush S S enght Number T A , , , , * * Only available in T2 esign Available bore imensions (mm) H7 keyway to IN 6885 sheet [JS9] Taper clamping bush Ø0 Ø Ø2 Ø4 Ø6 Ø8 Ø9 Ø20 Ø22 Ø24 Ø25 Ø28 Ø30 Ø32 Ø35 Ø38 Ø40 Ø42 Ø45 Ø48 Ø50 Ø55 Ø60 Ø70 Ø HKK CURVE JAW COUPINGS 7
8 PROUCT GROUPS Couplings ocking Assemblies Universal Joints Clutches & Brakes Brakes Collars Skille to get your ieas fulfille HITEX is a range of power transmission components eicate to a value to all OEM inustrial creations. HITEX is prouce using the latest technology & rich experience of its factories to provie innovative an cost-effective engineere solutions. Honore to have the opportunity to serve OEM customers worlwie, HITEX provies prompt an reliable eliveries to meet all aftersales requirements. European Transmission Company B.V. aan van e Ram BW Apeloorn The Netherlans Tel. +3 (0) info@europeantransmissioncompany.eu Our best technology is human Images may iffer from reality. All content (logo, text, ata, graphics, an images) may not be reprouce, copie, transmitte or manipulate without the prior written permission of the AZ Hollink Group. All content (text, iagrams an pictures) is subject to alteration. We accept no liability
On the market there are various types of V-belts, among which, the most 'widespread are: by SIT and shown in this catalogue are suitable to be used
V-Pulleys SIT V-Pulleys On the market there are various types of V-belts, among which, the most 'wiesprea are: narrow SP-SPA-SPB-SPC (ISO4184 - DIN 7753) classic -A-B-C (ISO 4184 - DIN 2215) American narrow
More informationTriple row axial angular contact ball bearings
Triple row angular contact ball bearings Series DKLF Heavy Series Features Bearings of series DKLF with a bore iameter of 30 mm an 40 mm are available in a Heavy series. This allows the user to achieve
More informationyour reliable partner EAS -Compact K.490.V16.EN
ES -Compact K.490.V16.EN www..com We safeguar the movements of this worl Specialists for power transmission for more than a century mayr power transmission is one of the most traitional an yet most innovative
More informationFULL COMPLEMENT NEEDLE BEARINGS
FULL OMPLEMENT NEELE EARINGS Technical features Full complement neele bearings These bearings are available with or without an inner ring from 12 bore size. Stanar complete bearings type NA have an inner
More informationSIT timing pulleys - TOP DRIVE HTD
IT timing pulleys - TOP DIV TD TOP DIV TD pulleys have a ifferent esign from the traitional toothe pulleys. The axial grooves are esigne to allow the belt teeth to catch the pulley teeth with negligible
More informationContent. SPIDEX the elastic coupling. 4 Technical description. 5 Technical description. 6 Sizing determination. 7 Application service factors
SPIDEX DENTEX Content 3 SPIDEX the elastic coupling 4 Technical escription 5 Technical escription 6 Sizing etermination 7 Application service factors 8 Couplings for IEC-stanar motors 9 Dimensions SPIDEX
More informationHigh-Performance Servo-Worm Reducers Input and Output Couplings for Servo-Worm Reducers 18. Selection and Ratings for Servo-Worm Reducers 19 22
Table of Contents Page High-Performance Servo-Worm Reucers 7 17 Input an Output Couplings for Servo-Worm Reucers 18 Selection an Ratings for Servo-Worm Reucers 19 22 Mounting, Maintenance an Spare Parts
More informationVolute Centrifugal Pumps PN 16 / PN 25 for Heat Transfer Media Thermal Oil up to 350 C Hot Water up to 204 C. Series NTWH/CTWH process model
Volute Centrifugal s PN 16 / PN 25 for Heat Transfer Meia Thermal Oil up to 350 C Hot Water up to 20 C Series NTWH/CTWH process moel Series NTWH/CTWH Series NBWH/CBWH block moel Series NIWH/CIWH in-line
More informationSplit pillow blocks
Definition an capabilities 638 Series 639 Variants 639 Design criteria: loas an torques 640 Installation/Assembly criteria: seal selection 641 Characteristics 642 Pillow block housing for bearings with
More informationTable of contents. Description of couplings 3. Coupling selection 4. Displacements 5. Selection of standard IEC motors 6
Table of contents Description of couplings 3 Coupling selection 4 Displacements 5 Selection of standard IEC motors 6 Properties of standard spiders 7 Hub designs 8 Cylindrical bores and spline bores 9
More informationRod ends, series K (wide version), internal and external thread. Rod ends, series E (slim version), internal and external thread
Ro Ens an Spherical earings Overview Ro ens, series K (wie version), internal an external threa Page Maintenance free, plastic Ø 5-20mm... Lubricateable (S), steel Ø 2-40mm... Maintenance free (T), steel
More informationDRIVE-TECHNOLOGY INKOMA - GROUP. Accessories for HSG, KSH, HSGK and DSH
INKOMGROUPINKOM DRIVETECHNOOGY GROUP ccessories HSG, KSH, HSGK an DSH INKOMGROUP Heaoffice Sitz er INKOM Maschinenbau GmbH Neue Reihe 44 D 38162 Schanelah Germany phone: +49/(0)5692210 fax: +49/(0)569221
More informationFlexible pin & bush coupling
Technical data KX-D Technical data Torque [Nm] NBR 80 Sh-A GJL Steel Dyn. torsion spring stiffness [Nm/rad] Max. speed Max. speed Rated Max. Vibratory [rpm] with Max. bore [mm] [rpm] with Max. bore [mm]
More informationThe Ideal Locking Devices For Shaft-to-Hub Connections. Proven Design. Easy To Use
C-ROM Sizing Software ETP Keyless Shaft Mount Connections The Ieal ocking evices For Shaft-to-Hub Connections. ETP Connections are ieal for positioning an locking shaft components in a system. They are
More informationNSK Ball Screws for Standard Stock
NSK Ball s for Stanar Stock ompact Series Next-generation compact ball screws offer quiet, high spee operating performance. stanar stock series assures immeiate elivery. New! Patent Pening BSS Series next-generation
More informationISO 9001:2008 LOCKING ASSEMBLIES SHRINK DISCS KEYLESS RIGID COUPLINGS
OCKING ASSEMBIES SHRINK DISCS KEYESS RIGID COUPINGS Introuction ISO 9001:2008 CIMAX Metal Proucts Company & MAV S.p.A. A Unique Partnership In June 2011, CIMAX entere an exclusive agreement with MAV S.p.A.
More informationTypes and operating description
22 Flexible jaw and 24 -NORM Types and operating description ROTEX Flexible jaw and 73 74 75 76 78 79 REVOLEX Technical data Type KX-D, material cast Type KX-D, material steel Type KX-D with brake disk
More informationJaw Couplings REK DCO
elastic for dynamic applications with curved jaws Features Compensation of axial, radial and angular misalignments Adsorbs vibrations Progressive torsion spring properties due to primarily pressurised
More informationVariable area flowmeter DFM 165 to 350
ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D60 Vlotho Fon +9 (0) 57 33.7 990 Fax +9 (0) 57 33.7 99 00 www.asvstuebbe.e contact@asvstuebbe.e Variable area flowmeter DFM to 3 For all inustrial uses High
More informationNSK Ball Screws for Standard Stock
www.bergab.ru Берг АБ bergab@ya.ru Тел. (495)-228--21, факс (495) 223-371 NSK Ball s for Stanar Stock ompact Series Next-generation compact ball screws offer quiet, high spee operating performance. stanar
More informationRadial Insert Ball Bearings Housed Bearing Units
Raial Insert all earings House earing Units Technical rouct Information TI 110 This publication has been prouce with a great eal of care, an all ata have been checke for accuracy. However, no liability
More informationTechnical features. Cam followers
AM FOLLOWERS Technical features am followers Naella cam followers are esigne to run irectly on various types of surface such as cams, ramps an slieways. In orer to satisfy the operating conitions impose
More informationRexnord Tollok Locking Assemblies
Tollok Catalog ownloa the most up-to-ate version at www.rexnor.com/ocumentation Rexnor Tollok Locking Assemblies Why Choose Rexnor Tollok Locking Assemblies? Why Choose Rexnor? When it comes to proviing
More informationShaft Diameter d 1 3 /16 01 B /4 01 B /16 01 B /2 01 B /16 01E B /4 01E B
Lubrication Fittings Lubrication points are tappe 1/4 NPT or 1/8 NPT epening on size an series, an fitte with nipples for grease lubrication as stanar. nipples may be remove an replace with other fittings
More informationBoWex Curved-tooth gear coupling, shaft coupling. BoWex-ELASTIC High flexible flange coupling. MONOLASTIC Single-part, flexible flange coupling
Curved-tooth gear coupling, shaft coupling Torsionally rigid flange coupling U.S. Patent 5,586,938 High flexible flange coupling Single-part, flexible flange coupling EP 0853203 U.S. Patent 6,117,017 Pump
More informationKUNSTSTOFF-METALL-FORMTEILE CROSSED-ROLLER-SLIM-SPLIT-BEARING. Crossed roller bearing PSX-08. Crossed roller bearing PSX-08 83
CROSSE-ROLLER-SLIM-SPLIT-BEARING Crosse roller bearing PSX-08 Crosse roller bearing PSX-08 83 CROSSE-ROLLER-SLIM-SPLIT-BEARING KUNSTSTOFF-METALL-FORMTEILE escription of shape Crosse roller bearings are
More informationSize 00 Size 0-5 Size 6-8. Technical Data. Setscrew 1TF 2TF 3TF 3) 2) R Pilot bore max.
Standard for a torque range up to 6800 Nm Standard zinc-coated and yellow passivated ting possible while in place Asbestos-free and rust-resistant friction linings Securing of the setting nut by locking
More informationKeyless Locking Devices
Keyless ocking evices IC 100 IC 100 s N/ 2 17 47 20 26 6 16 260 31 104 18 47 20 26 6 16 280 31 104 19 47 20 26 6 16 290 31 104 20 47 20 26 6 16 310 31 104 22 47 20 26 6 16 340 31 104 24 50 20 26 6 16 370
More informationDeep groove ball bearings
Deep groove ball bearings 6200-2 J/C3 HC5 GJN Nomenclature 1 2 3 4 5 1. Seals, shiels & snap rings: 2. Cage esigns: 4. Suffix: RSH RS2 RSL R 2RSH 2RS2 2RSL 2R 2 NR Contact seal of synthetic rubber (NBR)
More informationD I S C C O U P L I N G S
DISC COUPINGS DISC COUPINGS MAIN FEATURES The isc coupling is of the continuous ring laminate metallic iaphragm type with blaes in stainless steel. The torque is transmitte in pure tension through alternate
More informationJaw Couplings REK DQO
Jaw s REK DQO elastic for dynamic applications with radially mountable elastomer cushions 40-1 Features s up to 169 000 Nm Compensation of axial, radial and angular misalignments Adsorbs vibrations Progressive
More informationPlanetary Servo-reducer. SRP Range. The Machine Tool Drives Company
Planetary Servoreucer SRP Range The Machine Tool Drives Company 1 Range Overview SRP Planetary Servoreucer Versatile Drive solution Hightech planetary reucer + universal flange : multiuse solution Flexibility,
More informationSlewing Ring Bearings
Slewing Ring Bearings Wafangian Weiyuan Bearing Manufacturings Co.,Lt. Wafangian Weiyuan Bearing Manufacturings Co.,Lt. A: huhua Inustrial Park,Wafangian,alian,China el:+86-411-85584788 Fax:+86-411-85584896
More informationCATALOG
CATALOG www.jrbearing.cn www.importbearing.ru 1 The contents of this catalog are subjecte to change without prior notice. Every possible effort has been mae to ensure that the ata herein is correct; however,
More informationCOUPLERS 5. Fax: +44 (0)
COUPLERS Fax: +44 (0)1992 09890 3 COMPOSITE JAW COUPLERS (SERIES FS) L1 2.0 mm Max L2 2.0 mm Max L3 Bore B s 032-037 s 02-08 max features Low mass Freedom from corrosion Good damping properties Low cost
More informationPOLY-NORM. KTR-N sheet: edition: EN 1 of 29. POLY-NORM Operating-/Assembly Instructions
4510 EN 1 of 2 Flexible jaw-type couplings of series AR, ADR, AVR, AZR, AR/AZR, AZVR, AR with taper clamping sleeve and their combinations according to Standard 4//EC (ATEX 5) for finish bored, pilot bored
More informationDescription Symbol Definition or explanation Rated torque T KN Torque that can continuously be transmitted over the entire permissible speed range
Coupling selection Normally the is selected according to the nominal torque ( ) shown in the list of technical data, like all other coupling systems. In all cases the torque ( ) must exceed the maximum
More informationFenner Drives Trantorque Keyless Bushings: Power and Precision
Fenner rives Trantorque Keyless ushings: Power an Precision Fenner rives, a worlwie leaer in mechanical power transmission an motion control solutions, is please to present our comprehensive line of Trantorque
More informationTypes and operating description
22 Flexible jaw and pin & bush couplings 24 69 70 71 72 Selection of standard IEC motors Type PKZ, two-part and PKD, three-part Type PKA, drop-out center design coupling Displacements / elastomer sets
More informationIncremental encoders Insulated through hollow shaft ø inch pulses per revolution programmable (interpolated system)
Features HS35P with insulate hollow shaft Robust inustrial encoer up to IP 67 protection Highly versatile fully programmable encoer Interchangeable bore size(s) using metal inserts Insulating sleeve to
More informationTorsional LM Series Overview
orsional LM Series Overview LM Series he LM Series torsional couplings are designed specifically for diesel engine driven equipment. he LM couplings are highly torsionally compliant, allowing the engine
More informationASV sturdy and robust construction. DN 10 up to DN bar (PN 10) at 20 C. DMV 755: 1,0-9,0 bar DMV 765: 0,5-9,0 bar
Pressure Reucing Valve Type DMV Type DMV Print-No. / Design Size Max. Pressure Setting Range Pressure Setting Working Pressure Back lash Operating Security Maintenance Simple inline pipe connection ASV
More informationFlexible Couplings N-BIPEX Series
Flexible Couplings Series /2 Overview /2 Benefits /2 Application /3 Function /3 Design /4 Technical specifications /6 Type BWN /6 Selection and ordering data /7 Spare and wear parts /7 Selection and ordering
More informationTorsionally Rigid Disc Couplings
US 05 2016 Torsionally Rigid Disc Couplings Partner for Performance www.ringfeder.com Welcome to your system supplier for every aspect of power transmission RINGFEDER POWER TRANSMISSION We say what we
More informationMetal drill bits. Stronger than steel. Nothing stops the metal drill bits because we offer a drill bit for every application. HSS-E twist drill bit
HSS-E IN 338 cobalt 72-75 HSS IN 338 groun 76-79 HSS IN 338 stanar 80-84 HSS IN 338 stanar, shank reuce 85 HSS IN 340 86 HSS IN 1869 87 HSS hollow section rill bit / facae rill bit 88 HSS IN 345 89-90
More informationIndustry. SNR : The Bearing Housings
Inustry SNR : The Bearing ousings Contents Page Bearing ousings n Mounting ccessories 2 ousings 3 Bearings 4 Sealing Systems 6 ubrication 8 Bearing Clearance 10 Mounting Tools 12 Bearing rrangement 13
More informationAngular contact ball bearings
Angular contact ball bearings 7200 BE CB Y HC5 Nomenclature 1 2 3 4 1. esign: 2. Clearance: 3. Cage esigns: B BE A E NR N2 2Z 2RS1 40 contact angle 40 contact angle, high capacity, all ISO corners Conra
More informationShyam Enterprises 5 HEAT EXCHANGERS
Shyam Enterprises HEAT EXCHANGERS 33 Heat Exchangers Introuction The overall heat transfer coefficient of borosilicate glass equipment compare favourably with many alternative process plant construction
More informationRADIAL AND ANGULAR CONTACT BEARINGS
RIL N NGULR ONTT BERINGS Overview: Timken is a premier manufacturer of ball bearings. We prouce a broa range of precision ball bearings, wie inner ring ball bearings an house units for stanar inustrial
More information/00 RK INOX 10/16 EN RIVKLE. Stainless steel blind rivet nuts and studs
999000000400 RK INOX 10/16 EN RIVKE tainless steel blin rivet nuts an stus RIVKE tainless steel Contents Page RIVKE tainless steel New prouct range 3 New thin hea esign 4 ubricate RIVKE range 5 RIVKE tu
More informationEnd bearings for screw ends form and
R310EN 3301 (2009.08) Precision all Screw Assemblies osch Rexroth AG 91 En bearings for screw ens form 931 93 an 941 94 Pillow block unit SE-F earing LAF earing LAN Shown with slotte nut NMA Shown with
More informationROTEX. Torsionally flexible couplings: Torsionally flexible couplings ROTEX
ROTEX : ROTEX 17 Description of coupling ROTEX - couplings are characterized by small dimensions, low weight and low mass moments of inertia yet transmit high torques. Running quality and service life
More informationBalanced to G RPM s. the nose nut to be tightened to 100% Inspected,
WEER CHUCKS Mae in Why is the Weler Chuck the Best Choice? WHY THE esigne for Milling & rilling WEER CHUCK? The Weler Chuck is the most versatile chuck available in the market place toay! Balance to G2.5
More information/00 RK 09/2017 EN RIVKLE. Blind rivet nuts and studs
9990000000 RK 09/20 N RIVK lin rivet nuts an stus RIVK 2 Page Principle an function 4 tanar RIVK blin rivet nuts 14 RIVK HRT - High Resistance Threa 36 HRT RIVK FC - For Fiber-reinforce polymer 38 FC RIVK
More informationTypes and operating description
22 Types and operating description Flexible jaw and pin & bush couplings ROTEX Flexible jaw and pin & bush couplings 24 61 62 63 64 65 66 67 68 -NORM -NORM Technical data Selection of standard IEC motors
More information60.08 Style 233S Restrained Flexible Coupling For Dynamic Joint Deflection
Style 33S Restraine Flexible Coupling Victaulic Bolte Split-Sleeve Proucts (VBSP) Style 33S stainless steel restraine couplings (formerly Depen-O-Lok FxF Moifie) provie a fully restraine, flexible pipe
More informationProduct Range Export April PVC-U piping systems for industrial application. Pipe, Fittings, Valves and Accessories
Prouct Range Export April 2006 PVC-U piping systems for inustrial application Pipe, Fittings, Valves an Accessories 40 Years of Application Know ow Approvals PVC-U ebensmittelzulassung lebensmittelecht
More informationPressure Relief Valve Overflow Valve Type DHV 715 Type DHV 716 Type DHV 725
Pressure Relief Valve Overflow Valve Type DHV Type DHV Type DHV DIBt* approve DIBt* approve High repeating accuracy, with union sockets or spigot ens Print / The optimal monitoring valves Sizes up to Operating
More informationInstallation and Operational Instructions for EAS -Compact overload clutch Type 49_. 4._ Sizes 01 to 3
Please read these Operational Instructions carefully and follow them accordingly! Ignoring these Instructions may lead to malfunctions or to clutch failure, resulting in damage to other parts. Contents
More informationSection 3: Introduction. Dipped Radial Capacitors. Foreword SOLID TANTALUM RESIN DIPPED SERIES TAP/TEP
ection 3: Introuction Forewor AVX offers a broa line of soli Tantalum capacitors in a wie range of sizes, styles, an ratings to meet any esign nees. This catalog combines into one source AVX s leae tantalum
More informationBACKLASH FREE AND STANDARD JAW COUPLING
BACKLASH FREE AND STANDARD JAW COUPLING Up to 9.600 Nm of torque and 130 mm bore GAS/SG e GAS 25 Technology for Safety GAS/SG-ST - backlash free jaw coupling «in steel»: introduction Made in steel fully
More informationTOOLFLEX RADEX -NC. Backlash-free shaft couplings: backlash-free flexible shaft couplings. backlash-free torsionally stiff bellow-type couplings
Backlash-free shaft couplings: ROTEX GS backlash-free flexible shaft couplings TOOLFLEX backlash-free torsionally stiff bellow-type couplings RADEX -NC backlash-free torsionally stiff servo lamina coupling
More informationFlange couplings. Please note: torque increase. Types and operating description 196
194 Flange couplings Types and operating description 196 BoWex FLE-PA BoWex FLE-PA 198 BoWex FLE-PAC 200 Selection according to SAE standard 202 Mounting dimensions according to SAE standard 203 Programme
More informationHIGH PERFORMANCE HOLE MAKING APPLICATIONS DIJET DRILL SERIES HOLE MAKING SERIES CATALOG NO DIJET INCORPORATED
HOE MAKING SERIES CATAOG NO. 000 HIGH PERFORMANCE HOE MAKING APPICATIONS IJET RI SERIES IJET INCORPORATE www.ijetusa.com Inexable S-Cut 40º Specifications - rilling epth 3x iameter PARTS l l Screw Wrench
More informationBEARINGS WITH CAGE - GUIDED NEEDLES
EARINGS WITH AGE - GUIE NEELES Technical features earings with cage - guie neeles ONSTRUTION The basic constructions of neele roller bearings are: 1 ) 10 ). Neele roller bearings with integral flanges
More informationROTEX Operating/Assembly instructions
of 2 Torsionally flexible jaw-type couplings No. 00 shaft coupling, No. 0 DKM, with taper clamping sleeve and their combinations according to directive 94/9/EC (ATEX 95) for finish bored, pilot bored and
More informationCAST STEEL FLOATING BALL VALVE
CAST STEEL FLOATING BALL VALVE Stanar an Prouct Range Technical Innovation Design an Inspection Stanar: Pressure-Temperature Ratings Shell Wall Thickness Flange Face-to-face Dimensions Socket Wel & NPT
More informationFor advanced drive technology. Backlash-free shaft couplings: TOOLFLEX. Backlash-free shaft couplings ROTEX GS TOOLFLEX. Metal bellow-type couplings
Backlash-free shaft couplings: ROTEX GS Backlash-free shaft couplings ROTEX GS TOOLFLEX TOOLFLEX Metal bellow-type couplings 9 Backlash-free shaft coupling Technical description ROTEX GS is a 3-part, axial
More informationSelection Tool. on the Internet at in the section MÄDLER -Tools. Other sizes and designs on request. Connecting Shafts Page 766
Couplings Overview Friction Clutches Friction Clutches Type B Axial Arrangement Friction Clutches Type C Transversal Flexibility Sliding Hubs with Torsionally-Flexible Coupling Multi-Disk Friction Clutches
More informationPOWER TRANSMISSION RIGID COUPLINGS MINI MINI
POWER TRANSMISSION RIGID COUPLINGS 2 RIGID COUPLINGS FEATURES The Mini coupling is a backlash-free, torsion proof, bending elastic and, above all, maintenance-free steel coupling made in one piece. It
More informationData sheet NK10... U DB_EN_NK10_SIL ST4-C 04/17. Fill Level Limiter. Functional security in compliance with DIN EN * *
ata sheet NK10... U0600 09005326 _EN_NK10_SIL ST4-C 04/17 *09005326* Fill Level Limiter Functional security in compliance with IN EN 61508 1 Prouct an functional escription FISCHER Mess- un Regeltechnik
More informationBoWex FLE-PA DBGM BoWex-ELASTIC DBP
BoWex FLE-PA DBGM BoWex-ELASTIC DBP Flange coupling for I. C.-engines BoWex BoWex-FLE-PA BoWex ELASTIC BoWex FLE-PA couplings are torsionally rigid curved-tooth flange couplings, made from a combination
More informationSIZES FROM 1,950-25,000 Nm BACKLASH FREE ELASTIC JAW COUPLINGS
K Z SIZS FROM 1,950-25,000 Nm BCKLSH FR LSTIC JW COUPLINGS LSTOMR COUPLINGS K Z Optional: GNRL INFORMTION BOUT R+W LSTOMR COUPLINGS: SRVIC LIF When properly selected, handled, and installed, these couplings
More informationData sheet NK10. Fill Level Limiter DB_EN_NK10 ST4-C 04/17 * *
ata sheet NK10 09005536 _EN_NK10 ST4-C 04/17 *09005536* Fill Level Limiter 1 Prouct an functional escription FISCHER Mess- un Regeltechnik GmH 1 Prouct an functional escription 1.1 elivery scope NK10 accoring
More informationROTEX. ROTEX mounting instructions design ZS-DKM and ZS-DKM-H. KTR-N sheet: edition: E 1 4
D-807 Rheine 022 E 1 ROTEX Torsionally flexible jaw-type couplings types ZS-DKM, ZS-DKM-H and their combinations design ZS-DKM1 according to Standard 9/9/EC (ATEX 95) for finish bored, pilot bored and
More informationLoop Flushing Valve. Lenntech. Technical Information. Tel Fax
MAKING MODERN LIVING POSSIBLE Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 Revision history Table of revisions Date Change Rev Dec 2014 Danfoss Layout EA Oct 2011
More informationReliable Solutions for Continuous Casters
eliable Solutions for Continuous Casters For More Than A Century, Our Stanars Have Set The Stanar Aroun the worl, companies turn to Timken for innovation an reliability. With expertise in materials science
More informationSLIM-SPLIT-BEARING KUNSTSTOFF-METALL-FORMTEILE
SLIM-SPLIT-BEARING KUNSTSTOFF-METALL-FORMTEILE Publishe by KMF Kunststoff-Metall-Formteile GmbH Postweg 34-40 -73441 Bopfingen Phone 0736/7001 Fax 0736/7007 E-Mail info@kmf-bearings.e All rights reserve.
More informationPOLY-NORM. KTR-N Sheet: Edition: EN 1 of POLY-NORM Operating/Assembly instructions
1 of 30 Flexible jaw-type couplings AR, ADR, AVR, AZR, AR/AZR, AZVR, AR with taper clamping sleeve and their combinations Type AR according to directive 94/9/EC (ATEX 95) for finish bored, pilot bored
More informationNew Super Metric Ball Bushing * Bearings Technical Bulletin
ew Super Metric all ushing earings Technical ulletin Super Metric all ushing earings igh performance from superior esign: coefficient of friction as low as 0,001. This allows the use of smaller less expensive
More informationANSI VALVE CATALOGUE
ANSI VAVE CATAOGUE GATE VAVES GOBE VAVES CHECK VAVES BA VAVES BUTTERFY VAVES SYSTEMS AND PRODUCTS FOR INDUSTRIA CARGO TRANSFER AND STORAGE ANSI VAVE CATAOGUE Introuction CTS has evelope itself into a reputable
More informationManual Applications. Tapping attachments for manual tapping application.
Manual Applications Tapping attachments for manual tapping application RX Newest series for high prouction with heavy uty ball clutch. Tapping attachments for rilling an milling machines an pneumatic,
More informationBACKLASH FREE AND STANDARD JAW COUPLING
BACKLASH FREE AND STANDARD JAW COUPLING Up to 9.600 Nm of torque and 130 mm bore GAS/SG e GAS 25 Technology for Safety 10-2018 GAS/SG-ST - backlash free jaw coupling «in steel»: introduction Made in steel
More informationEB Series Electro Brake
Shaft Mounted Brakes for Power-On Applications Pre-engineered, pre-packaged brakes mount on motor or thru shafts. They have been designed to mate easily with industry standard motors, reducers and other
More informationescalator step up to quality
escalator step up to quality A.D. 1880. MARCH 22. NO 1319 Unique Quality an Safety LEADING EDGE TECHNOLOGY Renol provies practical cost effective solutions, with a commitment of value through quality.
More informationCurved Jaw Couplings. Curved Jaw Couplings From Lovejoy
Curved Jaw Couplings From Lovejoy Introduction For over 100 years Lovejoy Inc. has set the standard for straight jaw couplings in the United States and around the world. Now, Lovejoy Inc. is proud to present
More informationFLEXIBLE COUPLINGS - RIGID COUPLINGS Up to Nm of torque and 205 mm bores
Edition 10/2014 www.comintec.it FLEXIBLE COUPLINGS - RIGID COUPLINGS Up to 130.000 Nm of torque and 205 mm bores (BACKLASH FREE) Technology for Safety FLEXIBLE COUPLINGS - RIGID COUPLINGS (BACKLASH FREE):
More informationBall and Roller Bearings
Ball an Roller Bearings Ball an Roller Bearings Introuction Business publication Ball an Roller Bearings ZVL - ZKL offers a survey of the basic types an sizes of bearings being prouce an elivere uner
More informationFLENDER Standard Couplings
FLENDER Standard Couplings N-BIPEX FLENDER couplings Catalog MD 10.1 N Edition October 2016 Related catalogs ARPEX MD 10.2 High Performance Couplings Bucket Elevator Drives MD 20.2 E86060-K5710-A121-A1-7600
More informationOPTOTHYRISTOR MODULES OF SINGLE- AND THREE-PHASE RECTIFIER BRIDGES MO20(A), MO21(A), MO22(A), MO23(A), MO24(A) USER S MANUAL
ELECTRUM AV 01.01.013 MO0,1,,3,.oc www.electrum-av.com OPTOTHYRISTOR MODULES OF SINGLE- AND THREE-PHASE RECTIFIER BRIDGES MO0(A), MO1(A), MO(A), MO3(A), MO(A) USER S MANUAL 5 Naugorskoe highway, Orel,
More informationCOUPLINGS HRC FLEXIBLE COUPLINGS CHAIN SHAFT COUPLINGS SPLINE CLUTCHES TORQUE LIMITERS TORQUE LIMITER COUPLINGS
COUPLINGS HRC FLEXIBLE COUPLINGS CHAIN SHAFT COUPLINGS SPLINE CLUTCHES TORQUE LIMITERS TORQUE LIMITER COUPLINGS FLEXIBLE COUPLINGS HRC TYPE Hercus HRC Couplings are designed for general-purpose applications
More information5 Bearing Preload and Rigidity
Technology>Precision>Innovation outer ring. 2)The contact surface pressure on the raceway surface reaches 4200Mpa or 428kgf/mm2 in either the inner or outer ring raceway. The allowable axial loa for each
More information10/2017. Product Catalogue BRONZE BARS AND BEARINGS. Your first choice in bronze
10/2017 Prouct Catalogue BRONZE BARS AN BEARINGS Your first choice in bronze Oy Johnson Metall Ab Your first choice in bronze Oy Johnson Metall Ab casts an machines bronze-alloy plain bearings an machine
More informationØ range <500 mm. Ø range >500 mm. Operating conditions. Surface quality. Surface roughness R a R max
Hyraulics Ro Seals Merkel U-Ring T 20 Merkel U-Ring T 20 Merkel U-Ring T 20 PUR profile ring Material range
More informationUS Nor-Mex. Elastomer Jaw Couplings. Partner for Performance
US 11 2015 Nor-Mex lastomer Jaw Couplings Partner for Performance www.ringfeder.com Welcome to your system supplier for every aspect of power transmission Today s RINGFDR POWR TRANSMISSION GMBH was founded
More information*内輪/B126-B128/E_*内輪/B126-B128/E 11/05/25 10:07 ページ 127 Inner Rings
Inner Rings Inner Rings Inner Rings Inner Rings Many of the neele roller bearings use a shaft as the irect raceway surface without using inner ring. However, it is recommene to use any of the inner rings
More informationEflex and Powerpin Flexible Couplings
Eflex and Powerpin Flexible s Accepts parallel, angular and axial misalignment Torsionally flexible Simple assembly Wide range of standard designs No lubrication 80 or 90 shore hardness close fitting elements
More informationCable protection systems
Cable protection systems Poleon // Meleon // Meleon Pro Cable protection systems Reliable protection for cables In inustry, cables an wires are expose to exceptional loas. eat an col, tensile an compressive
More informationTorsionally Stiff Steel Lamina Couplings. innovative quality products. optimal cost-performance ratio. certified according to DIN ISO 9001
RGFLEX Torsionally Stiff Steel Lamina Couplings features: innovative quality products large-scale service optimal cost-performance ratio certified according to DN SO 0 worldwide net of distribution www.ktr.com
More informationMETAL DRILL BITS STRONGER THAN STEEL HAMMER DRILL BITS CHISEL METAL DRILL BITS WOOD DRILL BITS SAWS ASSORTMENTS MODULES - SHELVES
STRONGER THAN STEEL RILL 307 HSS-E IN 338 cobalt 76 79 311 HSS TIN IN 338 steel rill bit 80 81 302 HSS IN 338, groun, split point 82 85 300 HSS IN 338, stanar 86 90 300 HSS IN 338, stanar, shank reuce
More information