Flexible pin & bush coupling
|
|
- Adela Lynch
- 5 years ago
- Views:
Transcription
1 Technical data KX-D Technical data Torque [Nm] NBR 80 Sh-A GJL Steel Dyn. torsion spring stiffness [Nm/rad] Max. speed Max. speed Rated Max. Vibratory [rpm] with Max. bore [mm] [rpm] with Max. bore [mm] 0.25xTKN 0.50xTKN 0.75xTKN 1.00xTKN TKN TKmax. TKW V=35 m/s V=60 m/s KX-D ,641x10 6 0,941x10 6 1,355x10 6 1,864x10 6 KX-D ,834x10 6 1,224x10 6 1,763x10 6 2,425x10 6 KX-D ,077x10 6 1,580x10 6 2,277x10 6 3,131x10 6 KX-D ,404x10 6 2,060x10 6 2,967x10 6 4,081x10 6 KX-D ,742x10 6 2,350x10 6 3,297x10 6 4,443x10 6 KX-D ,304x10 6 3,108x10 6 4,360x10 6 5,876x10 6 KX-D ,880x10 6 3,885x10 6 5,450x10 6 7,345x10 6 KX-D ,550x10 6 6,272x10 6 1,050x10 7 1,396x10 7 KX-D ,980x10 6 8,243x10 6 1,380x10 7 1,834x10 7 KX-D ,634x10 6 1,052x10 7 1,762x10 7 2,342x10 7 KX-D ,101x10 7 2,350x10 7 3,613x10 7 4,861x10 7 KX-D ,456x10 7 3,108x10 7 4,778x10 7 6,429x10 7 KX-D ,896x10 7 4,047x10 7 6,221x10 7 8,371x10 7 KX-D ,287x10 7 4,880x10 7 7,502x10 7 1,009x10 8 KX-D ,001x10 7 6,403x10 7 9,843x10 7 1,324x10 8 KX-D ,572x10 7 7,622x10 7 1,172x10 8 1,577x10 8 KX-D ,518x10 7 9,640x10 7 1,482x10 8 1,994x10 8 KX-D ,325x10 7 1,350x10 8 2,075x10 8 2,208x10 8 KX-D acc. to 8,832x10 7 1,885x10 8 2,897x10 8 3,083x10 8 KX-D customer s 1,177x10 8 2,5107x10 8 3,859x10 8 4,107x10 8 KX-D request 1,512x10 8 3,226x10 8 4,959x10 8 5,277x10 8 If requested, coupling is dynamically balanced (semi-key balancing G 6.3 with speed on request of customer). For circumferential speeds exceeding V = 30 m/s, we would recommend dynamic balancing. Axial displacement ΔKa Radial displacement ΔKr Angular displacement Kw Lmax./min = L + Ka [mm] Displacements (KX and KX-D) Max. axial displacements Ka [mm] ±1,5 ±1,5 ±1,5 ±2 ±2 ±2 ±2 ±2,5 ±2,5 ±2,5 ±2,5 ±2,5 ±2,5 ±2,5 ±4 ±4 ±4 ±4 ±4 ±4 ±4 Max. radial displacement Kr [mm] or max. angular displacements Kw [mm] with speed n Kw = Emax. EMin. [mm] 250 rpm 0,95 1,1 1,1 1,2 1,3 1,4 1,5 1,7 1,9 2,0 2,2 2,5 2,7 2,9 3,1 3,3 3,5 3,8 4,4 4,9 5,4 500 rpm 0,70 0,80 0,80 0,9 0,9 1,0 1,1 1,2 1,3 1,4 1,6 1,7 1,9 2,0 2,2 2,3 2,5 2,8 3,1 3,5 3,8 750 rpm 0,60 0,65 0,65 0,7 0,8 0,8 0,9 1,0 1,1 1,2 1,3 1,4 1,6 1,7 1,8 1,9 2,0 2,2 2, rpm 0,50 0,55 0,55 0,6 0,7 0,7 0,8 0,9 0,9 1,0 1,1 1,2 1,4 1,4 1,5 1,7 1, rpm 0,40 0,45 0,45 0,5 0,5 0,6 0,6 0,7 0,8 0,8 0,9 1, rpm 0,35 0,40 0,40 0,4 0,5 0,5 0,5 0,6 0, rpm 0,30 0,35 0,35 0,4 0,4 Assembly instructions The above-mentioned permissible displacement figures of the flexible KX couplings are standard values, considering the coupling load up to the rated torque TKN of the coupling and an ambient temperature of + 30 C. Care should be taken to maintain the distance dimension E accurately in order to allow for axial clearance of the coupling while in operation. See KTR mounting instructions, KTR standard at our homepage REVOLEX 73
2 Casted material For legend of pictogram please refer to fl apper on the cover Type KX-D Finish bore [min. Torque 1) [Nm] Max. speed 2) Dimensions [mm] - max.] [rpm] TKN TKmax. d1; d2 L l1; l2 E DH D1; D2 N1; N2 M* type KX-D 5 = Hub part 5 3 = Pins complete 6 = KX-D sleeve (hardened and corrosion-resistant) Mass moments of inertia 3) [kgm²] KX-D , KX-D , KX-D , KX-D , KX-D , KX-D , KX-D , KX-D , KX-D , Approx. weight 3) [kg] KX-D , KX-D , KX-D , KX-D , KX-D , * Drop-out center dimension 1) Standard material NBR 80 Shore-A, please observe selection on page 14 et seqq. 2) Higher speeds on request. 3) Relating to max. bore Finish bore acc. to ISO fi t H7, feather keyway acc. to DIN 6885 sheet 1 - JS9. If requested, coupling is dynamically balanced (semi-key balancing G 6.3 with speed on request of customer). For circumferential speeds exceeding V = 30 m/s, we would recommend dynamic balancing. = pre-bored available from stock Ordering example: KX-D 170 GJL Ø120 Ø150 and type of coupling Material Finish bore Finish bore 74
3 Material steel For legend of pictogram please refer to fl apper on the cover Type KX-D 5 = Hub part 5 3 = Pins complete 6 = KX-D sleeve (hardened and corrosion-resistant) Type KX-D Torque 1) [Nm] Finish bore Max. speed 2) [min. - max.] Dimensions [mm] TKN TKmax. [rpm] d1; d2 L l1; l2 E DH D1; D2 N1; N2 M* Mass moments of inertia 3) [kgm²] KX-D , KX-D , KX-D , KX-D , KX-D , KX-D , KX-D , KX-D , KX-D , KX-D , KX-D , Approx. weight 3) [kg] KX-D , KX-D , KX-D , KX-D , KX-D , KX-D , KX-D ) 480 4) ) , KX-D ) ) 540 4) ) , KX-D ) ) 600 4) ) , KX-D ) ) 660 4) ) , * Drop-out center dimension 1) Standard material NBR 80 Shore-A, for selection see page 14 et seqq. 2) Higher speeds on request. 3) Relating to max. bore 4) Variable according to customer s requests Finish bore acc. to ISO fi t H7, feather keyway acc. to DIN 6885 sheet 1 - JS9. If requested, coupling is dynamically balanced (semi-key balancing G 6.3 with speed on request of customer). For circumferential speeds exceeding V = 30 m/s, we would recommend dyn. balancing. = pre-bored available from stock KX-D 170 Stahl Ø120 Ø150 Ordering example: and type of coupling Material Finish bore Finish bore 75
4 Flexible Technical data of pins Coated sleeve Taper pin design B KX-D Technical data Pin Component 3.2 Component 3.1b Component 3.4b , No. z Elastomer ring NBR 80 Shore A Pin Screw DIN 931/933 KX-D D l1 l2 d1 L1 L2 M1 SW1 Tightening torque TA [Nm] 50,0 12,7 9,0 25, M ,0 17,8 12,5 30,60 147,5 178 M ,5 22,9 15,2 43, M ,5 20,3 58, M M General information on the elastomer rings Material Perbunan (NBR) Natural rubber (NR) Perbunan (NBR) Spider hardness 80 Shore-A 80 Shore-A 80 Shore-A Permanent temperature range [ C] - 30 to to to +80 Max. temperature (short-term) [ C] - 50 to +120 Colour black black blue Operating range STANDARD Subzero temperatures Electrically insulating and backlash-free, e. g. ropeway drives 78
5 Assembly/disassembly 1 Unscrew screw 2 Seal screw in this area [ e. g. with Loctite 55 ] 3 Fill the tapped hole with standard grease for 3/4 The hydraulic pressure is transmitted to the pin displacing it from the taper fit. 4 Screw in the the screw (no special tools required) 5 Other types Type AB with limited axial backlash Intermediate shaft type with RADEX -N Backlash-free type Type KX-D SD shiftable with shiftable linkage Type KX-D with cardan shaft connection engaged disengaged 79
Types and operating description
22 Flexible jaw and 24 -NORM Types and operating description ROTEX Flexible jaw and 73 74 75 76 78 79 REVOLEX Technical data Type KX-D, material cast Type KX-D, material steel Type KX-D with brake disk
More informationTypes and operating description
22 Types and operating description Flexible jaw and pin & bush couplings ROTEX Flexible jaw and pin & bush couplings 24 61 62 63 64 65 66 67 68 -NORM -NORM Technical data Selection of standard IEC motors
More informationTypes and operating description
22 Flexible jaw and pin & bush couplings 24 69 70 71 72 Selection of standard IEC motors Type PKZ, two-part and PKD, three-part Type PKA, drop-out center design coupling Displacements / elastomer sets
More informationSteel lamina couplings
RIGIFLEX -N Steel lamina couplings The following lamina types are distinguished with RIGIFLEX -N: 35 65 (lamina with 4 holes) 75 160 (lamina with 6 holes) 166 406 (lamina with 6 holes) 168 408 (lamina
More informationROTEX GS Backlash-free jaw couplings
ROTEX GS Technical description ROTEX GS is a three-part, axial plug-in coupling backlash-free under prestress. It is convincing even with critical applications by its backlash-free power transmission,
More informationBoWex Curved-tooth gear coupling, shaft coupling. BoWex-ELASTIC High flexible flange coupling. MONOLASTIC Single-part, flexible flange coupling
Curved-tooth gear coupling, shaft coupling Torsionally rigid flange coupling U.S. Patent 5,586,938 High flexible flange coupling Single-part, flexible flange coupling EP 0853203 U.S. Patent 6,117,017 Pump
More informationFlange couplings. Please note: torque increase. Types and operating description 196
194 Flange couplings Types and operating description 196 BoWex FLE-PA BoWex FLE-PA 198 BoWex FLE-PAC 200 Selection according to SAE standard 202 Mounting dimensions according to SAE standard 203 Programme
More informationGear couplings. Types and operating description 82
80 Gear couplings Types and operating description 82 BoWex Technical data 84 Displacements 85 Cylindrical and taper bores and selection of standard IEC motors 86 Type junior and junior M plug-in couplings
More informationAll-steel gear couplings
GEARex FA, FB and FAB All-steel gear couplings Coupling in accordance with AGMA 9008-B00, high power density For legend of pictogram please refer to flapper on the cover 80 Dimensions Max. finish bore
More informationSteel lamina couplings
174 Types and operating description 176 RADEX -N General information and types of hubs 178 Types and applications 179 Technical data 180 Standard types 182 Customized types 184 Corrosion-resistant type
More informationRADEX -NC Servo lamina couplings
RADEX -NC Servo lamina couplings Technical description RADEX -NC is a line specifically developed for servo technology. In this coupling a set of torsionally rigid steel laminas that are soft in bending
More informationTOOLFLEX RADEX -NC. Backlash-free shaft couplings: backlash-free flexible shaft couplings. backlash-free torsionally stiff bellow-type couplings
Backlash-free shaft couplings: ROTEX GS backlash-free flexible shaft couplings TOOLFLEX backlash-free torsionally stiff bellow-type couplings RADEX -NC backlash-free torsionally stiff servo lamina coupling
More informationGear couplings. Types and operating description 82
80 Gear couplings Types and operating description 82 BoWex Technical data 84 Displacements 85 Cylindrical and taper bores and selection of standard IEC motors 86 Type junior and junior M plug-in couplings
More informationFor advanced drive technology. Backlash-free shaft couplings: TOOLFLEX. Backlash-free shaft couplings ROTEX GS TOOLFLEX. Metal bellow-type couplings
Backlash-free shaft couplings: ROTEX GS Backlash-free shaft couplings ROTEX GS TOOLFLEX TOOLFLEX Metal bellow-type couplings 9 Backlash-free shaft coupling Technical description ROTEX GS is a 3-part, axial
More informationDescription Symbol Definition or explanation Rated torque T KN Torque that can continuously be transmitted over the entire permissible speed range
Coupling selection Normally the is selected according to the nominal torque ( ) shown in the list of technical data, like all other coupling systems. In all cases the torque ( ) must exceed the maximum
More informationSize 00 Size 0-5 Size 6-8. Technical Data. Setscrew 1TF 2TF 3TF 3) 2) R Pilot bore max.
Standard for a torque range up to 6800 Nm Standard zinc-coated and yellow passivated ting possible while in place Asbestos-free and rust-resistant friction linings Securing of the setting nut by locking
More informationType AB with limitation of axial backlash
1 of 21 with limitation of axial backlash Flexible pin & bush couplings types KX and KX-D and their combinations Type KX - AB (taper pin design B) Type KX-D - AB (taper pin design B) 2 of 21 is a torsionally
More informationTable of contents. Description of couplings 3. Coupling selection 4. Displacements 5. Selection of standard IEC motors 6
Table of contents Description of couplings 3 Coupling selection 4 Displacements 5 Selection of standard IEC motors 6 Properties of standard spiders 7 Hub designs 8 Cylindrical bores and spline bores 9
More informationRIGIFLEX -N RADEX -N. Steel laminae coupling. Steel laminae coupling. You will find continuously updated data in our online catalogue at
117 Table of contents 117 Coupling selection steel laminae coupling 119 Description of coupling 121 General information 122 Types and applications 123 Technical data 124 Standard types 126 Special types
More informationFlexible Couplings BIPEX Series
Siemens AG 2011 Flexible Couplings BIPEX Series /2 Overview /2 Benefits /2 Application /3 Design /4 Technical data /5 Type BWN /5 Selection and ordering data /6 Type BWT /6 Selection and ordering data
More informationBoWex FLE-PA DBGM BoWex-ELASTIC DBP
BoWex FLE-PA DBGM BoWex-ELASTIC DBP Flange coupling for I. C.-engines BoWex BoWex-FLE-PA BoWex ELASTIC BoWex FLE-PA couplings are torsionally rigid curved-tooth flange couplings, made from a combination
More informationTorsionally Stiff Steel Lamina Couplings. innovative quality products. optimal cost-performance ratio. certified according to DIN ISO 9001
RGFLEX Torsionally Stiff Steel Lamina Couplings features: innovative quality products large-scale service optimal cost-performance ratio certified according to DN SO 0 worldwide net of distribution www.ktr.com
More informationJaw Couplings REK DQO
Jaw s REK DQO elastic for dynamic applications with radially mountable elastomer cushions 40-1 Features s up to 169 000 Nm Compensation of axial, radial and angular misalignments Adsorbs vibrations Progressive
More informationCoupling description. Disc pack with bolts
Coupling description RADEX -N couplings are designed to transmit torque between drive and driven components via steel hubs and flexible metallic elements commonly known as discs. The combination of these
More informationTorque measuring. Types and operating description 310
308 Torque measuring technology Torque measuring shafts Types and operating description 310 Type 16/10, 16/30, 16/50 312 Type 32/100, 32/300, 32/500 314 Type 42/1000 316 Type 70/3000, 70/5000 318 Type
More informationJaw Couplings REK DCO
elastic for dynamic applications with curved jaws Features Compensation of axial, radial and angular misalignments Adsorbs vibrations Progressive torsion spring properties due to primarily pressurised
More informationheet: 1 of 22 Backlash-free, torsionally stiff and maintenance-free coupling Type with setscrew Type with clamping hubs Type KN (Taper hubs) Type M with setscrew Type M with clamping hubs Type PI 11-3379-883
More informationROTEX SD shiftable jaw coupling
1 of 16 SD shiftable jaw coupling Drawn: 201-08-31 Pz Replacing: dated 2006-08-14 Verified: 201-09-07 Pz Replaced by: 2 of 16 SD is a torsionally flexible jaw coupling shiftable at standstill. It is able
More informationTOOLFLEX Operating-/Assembly Instructions
D-807 Rheine heet: 5810 EN 1 of 19 Backlash-free, torsionally stiff and maintenance-free coupling is a backlash-free, torsionally stiff and maintenance-free metal bellow-type coupling designed to be used
More informationCOUNTEX Backlash-free shaft encoder coupling. TOOLFLEX Backlash-free torsionally stiff bellow-type coupling. Backlash-free flexible shaft coupling
Backlash-free flexible shaft coupling Backlash-free shaft encoder coupling Backlash-free torsionally stiff bellow-type coupling Backlash-free torsionally stiff servo laminae coupling 137 Table of contents
More informationMULTI CROSS RILLO. Highly flexible tyre coupling with taper bushings
MULTI CROSS RILLO Highly flexible tyre coupling with taper bushings Maschinenfabrik Dipl.-Ing. Herwarth Reich GmbH Vierhausstr. 53 D-44807 Bochum P.O. Box 10 20 66 D-44720 Bochum Tel.: +49 / (0)234 / 959
More informationTorsionally rigid flange couplings
Axial plug-in, maintenance-free, torsionally rigid For legend of pictogram please refer to flapper on the cover 130 Size Size Pilot bore Finish bore d Technical data of BoWex FLE-PA Torques/Weights/Mass
More informationLIGHTWEIGHT AND COMPACT. SERIES SL Nm. single-position multi-position. THE ultimate COUPLING from Nm
LIGHTWEIGHT AND COMPACT L SAFETY COUPLINGS TOQLIGHT SEIES SL 5 700 Nm THE ultimate COUPLING from 5 700 Nm SEIES SL DESIGN / FEATUES Extremely lightweight construction Up to 60 % weight reduction in comparison
More informationTORQUE LIMITERS SERIES 100
TORQUE LIITERS SERIES 100 Engaged Engaged TORQUE LIITER FOR SERVO DRIVES BACKLASH FREE Quality and Autogard are synonymous with overload protection. The company s reputation for high quality products is
More informationBacklash-free safety couplings. Backlash-free safety couplings. Product information. Optimal safety has a name: Guaranteed by two systems:
;;Engaged ;;Engaged Backlash-free safety couplings Product information Optimal safety has a name: Backlash-free safety couplings Guaranteed by two systems: ;;;; Locking Locking element - cylinder roller
More informationROTEX. Torsionally flexible couplings: Torsionally flexible couplings ROTEX
ROTEX : ROTEX 17 Description of coupling ROTEX - couplings are characterized by small dimensions, low weight and low mass moments of inertia yet transmit high torques. Running quality and service life
More informationBoWex FLE-PA. BoWex FLE-PAC. KTR-N Sheet: Edition: EN 1 of BoWex FLE-PA / FLE-PAC Operating/Assembly instructions
1 of 17 is a torsionally rigid flange coupling. It is able to compensate for shaft misalignment, for example caused by manufacturing inaccuracies, thermal expansion, etc. BoWex FLE-PA BoWex FLE-PAC Drawn:
More informationTORQLIGHT SAFETY COUPLINGS
LIGHTWEIGHT AND COMPACT single-position TOQLIGHT SAFETY COUPLINGS SEIES SL 10 700 Nm THE ULTIMATE COUPLING FOM 10 700 Nm SEIES SL DESIGN / FEATUES Extremely lightweight construction Up to 60 % weight reduction
More informationFor advanced drive technology CLAMPEX. Shaft-hub-connection. KTR Precision joints CLAMPEX
technology CLAMPEX Shaft-hub-connection CLAMPEX KTR Precision joints 227 technology Table of contents Page Brief information 228 Selection and calculation 25-255 CLAMPEX -Selection Shaft diameter = d 0
More informationCENTA POWER TRANSMISSION CENTAMAX ENGLISH. Is this PDF up to date? click here for an update check!
CENTA POWER TRANSMISSION CENTAMAX ENGLISH Is this PDF up to date? click here for an update check! CENTAMAX ROBUST. FOR TORSIONALLY ACTIVE DRIVES. SYSTEM COUPLING COMPONENTS TYPES APPLICATIONS TECHNICAL
More informationGEAR-COUPLINGS. Series LX GLX S-NX
GEAR-COUPLINGS Series LX GLX S-NX CONTENTS Application 3 Quality and production 3 Design and characteristics 3 selection 4-5 Key connections 6 Shrink-fit connections 7 Standard design with one-piece housing
More informationFor advanced drive technology CLAMPEX. Shaft-Hub-Connection. KTR Precision Joints CLAMPEX
technology CLAMPEX Shaft-Hub-Connection CLAMPEX KTR Precision Joints 07 technology Table of contents Page Brief information 09 Selection and calculation -5 CLAMPEX -Selection Shaft diameter = d 0 10 0
More informationROTEX POLY-NORM POLY REVOLEX. Tyre couplings
ROTEX -NORM Pin & bush coupl. : ROTEX -NORM Short torsionally flexible shaft couplings, not failsafe REVOLEX Compression sleeve couplings Flexible, torsionally flexible couplings Pin & bush couplings Flexible
More informationROTEX Operating/Assembly instructions Type AFN-SB spec. ROTEX
0223 EN 1 of 13 Torsionally flexible jaw-type couplings AFN-SB spec. and their combinations for finish bored, pilot bored and unbored couplings 0223 EN 2 of 13 is a torsionally flexible jaw coupling. It
More informationSIZES FROM ,000 Nm TORSIONALLY STIFF DISC PACK COUPLINGS
LP SIZES FROM 350 20,000 Nm TORSIONALLY STIFF DISC PACK COUPLINGS GENERAL INFORMATION ABOUT R+W DISC PACK COUPLINGS: SERVICE LIFE R+W disc pack couplings are fatigue resistant and wear free for an infinite
More informationFlexible Couplings N-BIPEX Series
Flexible Couplings Series /2 Overview /2 Benefits /2 Application /3 Function /3 Design /4 Technical specifications /6 Type BWN /6 Selection and ordering data /7 Spare and wear parts /7 Selection and ordering
More informationCOUNTEX TOOLFLEX. ROTEX GS Backlash-free shaft coupling. Backlash-free flexible shaft coupling. Backlash-free shaft encoder coupling
Backlash-free flexible shaft coupling Backlash-free shaft encoder coupling Backlash-free torsionally stiff metal bellow-type coupling Backlash-free torsionally stiff servo lamina coupling 143 Table of
More informationFlexible couplings. Flexible Torsion shaft couplings... LB Coupling. BICO-TL Coupling...Technical data, Service faktor.
Flexible couplings Flexible Torsion shaft couplings... LB Coupling...Technical data, Service faktor... Dimensions, Type of rubber BICO-TL Coupling...Technical data, Service faktor... Dimensions, Type of
More informationCLAMP AND FLANGE COUPLINGS
POWER TRANSMISSION RIGID COUPLINGS CLAMP AND FLANGE COUPLINGS 2 CLAMP AND FLANGE COUPLINGS RIGID COUPLINGS CLAMP AND FLANGE COUPLINGS FLANGE COUPLINGS DIN 116 Flange couplings are torsionally stiff, particularly
More informationSIZES FROM ,000 Nm TORSIONALLY STIFF DISC PACK COUPLINGS
LP SIZES FROM 350 20,000 Nm TORSIONALLY STIFF DIS PAK OUPLINGS GENERAL INFORMATION R+W DIS PAK OUPLINGS: SERVIE LIFE R+W disc pack couplings are fatigue resistant and wear free for an infinite service
More informationKTR Torque Limiters Overload Protection Systems
KT Torque Limiters Overload Protection Systems UFLEX - Friction Disk - Zero Backlash Ball Detent KT SI - Ball/oller Bearing Style KT SI Compact - Zero Backlash Ball Detent Catalog Contents (Metric) Page
More informationPOLY-NORM. KTR-N sheet: edition: EN 1 of 29. POLY-NORM Operating-/Assembly Instructions
4510 EN 1 of 2 Flexible jaw-type couplings of series AR, ADR, AVR, AZR, AR/AZR, AZVR, AR with taper clamping sleeve and their combinations according to Standard 4//EC (ATEX 5) for finish bored, pilot bored
More informationCouplings for machine tools. Perfect performance with dynamic drives.
Couplings for machine tools Perfect performance with dynamic drives www.ktr.com If you want to set things in motion: KTR Competence meets creativity As a leading manufacturer of high-quality drive components,
More informationRADEX -N Composite Operating/Assembly instructions
1 of 14 RADEX -N is a torsionally stiff flexible steel lamina coupling. It is able to compensate for shaft misalignment, for example caused by thermal expansion, etc. note ISO 101. Drawn: 0.05.15 Kb/Wig
More informationSIZES FROM 1,950-25,000 Nm BACKLASH FREE ELASTIC JAW COUPLINGS
K Z SIZS FROM 1,950-25,000 Nm BCKLSH FR LSTIC JW COUPLINGS LSTOMR COUPLINGS K Z Optional: GNRL INFORMTION BOUT R+W LSTOMR COUPLINGS: SRVIC LIF When properly selected, handled, and installed, these couplings
More informationBacklash-free Metal Bellow Couplings
Backlash-free Metal Bellow Couplings Edition 3/2008 pioneer in innovation GERWAH pioneer in innovation Future made by GERWAH. Your advantages: The GERWAH name is synonymous with development and manufacturing
More informationCurved Jaw. In This Section: CJ Series GS Series. CJ-1
In This Section: Series GS Series www.lovejoy-inc.com 49-1 Curved Jaw Safety Warning When using Lovejoy products, you must follow these instructions and take the following precautions. Failure to do so
More informationMINIATURE METAL BELLOWS COUPLINGS
VERSATILE AND PRECISE. Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) 426-5480 www.cmafh.com MINIATURE METAL BELLOWS COUPLINS SERIES MK 0.05 10 Nm THE
More informationTorsionally Rigid Disc Couplings
US 05 2016 Torsionally Rigid Disc Couplings Partner for Performance www.ringfeder.com Welcome to your system supplier for every aspect of power transmission RINGFEDER POWER TRANSMISSION We say what we
More informationClamping elements and precision joints
262 and precision joints CLAMPEX Types of clamping elements 264 Selection guide 266 Selection 267 Example of calculation/selection 268 Calculation of hubs and technical data 269 KTR 100 270 KTR 105 272
More informationDATAFLEX 110/... Torque Measuring Shaft Operating/Assembly instructions DATAFLEX. Torque measuring shaft type 110/
DATAFLEX 0/... of 22 DATAFLEX Torque measuring shaft type 0/ DATAFLEX 0/... 2 of 22 DATAFLEX is a maintenance-free torque measuring shaft with integrated speed measurement. Combined with the steel lamina
More informationBACKLASH FREE AND STANDARD JAW COUPLING
BACKLASH FREE AND STANDARD JAW COUPLING Up to 9.600 Nm of torque and 130 mm bore GAS/SG e GAS 25 Technology for Safety GAS/SG-ST - backlash free jaw coupling «in steel»: introduction Made in steel fully
More informationROTEX Operating/Assembly instructions
of 2 Torsionally flexible jaw-type couplings No. 00 shaft coupling, No. 0 DKM, with taper clamping sleeve and their combinations according to directive 94/9/EC (ATEX 95) for finish bored, pilot bored and
More information! CAUTION! Damages on the machine possible.
1 DATAFLEX is a maintenance free torque measurement shaft with integrated speed measurement. In connection with the RADEX -N steel disc coupling it is a torsionally stiff double cardanic coupling with
More informationCOMBIBOX. Program Schedule. Design. COMBIBOX clutch-brake-combination type 10 / 09 / 06. Attachments
clutch-brake-combination 10 / 09 / 06 with an energised to engage single sided clutch / brake... 10 with an energised to engage single sided clutch without brake... 09 with an energised to engage single
More informationAccessories smart additions for efficiency and intelligent performance
smart additions for efficiency and intelligent performance Metal bellows couplings Perfectionists you can count on Metal bellows couplings are designed for the highest requirements in servo drive technology.
More informationCENTAMAX -B. Torsionally soft couplings with precompression for independently mounted units on rigid or soft mounts. Catalog CM-B-E-06-04
Torsionally soft couplings with precompression for independently mounted units on rigid or soft mounts Catalog CM-B-E-06-04 Power Transmission Leading by innovation For many years we have been supplying
More informationCENTAFLEX-A CF-A-17-15
CENTA PRODUKT POWER TRANSMISSION DOKUMENTATION CF-A-17-15 ENGLISH Is this PDF up to date? click here for an update check! VERSATILE SUPERSTAR. FOR ALL APPLICATIONS. SYSTEM COMPONENTS/ADAPTATION AREAS OF
More informationRUFLEX SYNTEX SYNTEX -NC. KTR-SI Compact KTR-SI NEW. Torque limiter. Backlash-free Overload System. Backlash-free overload system
Torque limiter Backlash-free Overload System -NC Backlash-free overload system NEW Compact Backlash-free overload system Safety system 245 Table of contents NEW NEW Torque limiter 245 Overload protection
More informationKTR-SI. Idle rotation overload systems.
KTR-SI Idle rotation overload systems www.ktr.com KTR-SI FRE Idle rotation overload system KTR-SI FRE Operation of idle rotation elements Ratchet torque [Nm] Changes of ratchet torque between initial and
More informationTorsionally elastic couplings
Torsionally elastic couplings Torsionally elastic couplings Industrial Brakes Thrusters Pressure Oil Pumps Couplings Hydraulic Buffers Cellular Buffers Rail Pliers Sheaves Hook Blocks Crane Rail Wheels
More informationInstallation and Operational Instructions for EAS -smartic synchronous clutch Type 48_. 5._ Sizes 01 2
Please read these Operational Instructions carefully and follow them accordingly! Ignoring these Instructions may lead to malfunctions or to clutch failure, resulting in damage to other parts. Contents:
More informationPOSIFLEX. Gear couplings
POSIFLEX Gear couplings The complete range TSCHAN -S Δ kw Flexible couplings Δ kr TSCHAN -B Nor-Mex Δ ka Torsionally rigid couplings TK 100% TK 100% POSIMIN - PHP POSIFLEX TSCHAN-TK 3 Features Toothing
More informationFlexible Couplings BIPEX Series
Siemens AG 2008 Flexible Couplings BIPEX Series /2 Overview /2 Benefits /2 Application /3 Design /4 Technical data /5 Type BWN /5 Selection and ordering data /6 Type BWT /6 Selection and ordering data
More informationFLENDER Standard Couplings
FLENDER Standard Couplings N-BIPEX FLENDER couplings Catalog MD 10.1 N Edition October 2016 Related catalogs ARPEX MD 10.2 High Performance Couplings Bucket Elevator Drives MD 20.2 E86060-K5710-A121-A1-7600
More informationFlexible Couplings BIPEX Series
Siemens AG 2011 Flexible Couplings BIPEX Series /2 Overview /2 Benefits /2 Application /3 Design /4 Technical data /5 Type BWN /5 Selection and ordering data /6 Type BWT /6 Selection and ordering data
More informationROTEX. KTR-N Sheet: Edition: EN 1 of ROTEX Operating/Assembly instructions
of Torsionally flexible jaw-type couplings No. 00 shaft coupling, No. 08 DKM, with taper clamping sleeve and their combinations according to directive 204/34/EU for finish bored, pilot bored and unbored
More informationHighly Flexible Couplings ELPEX-B Series
Siemens AG 2015 Highly Flexible Couplings ELPEX-B Series /2 Overview /2 Benefits /2 Application /2 Design / Technical data /5 Type EBWN /5 Selection and ordering data /6 Type EBWT /6 Selection and ordering
More informationMetal bellows couplings
Metal bellows couplings Product information / Design Typical characteristics of metal bellows couplings Backlash-free transmission of torque High torsional stiffness, precision of transmission of rotational
More informationBACKLASH FREE AND STANDARD JAW COUPLING
BACKLASH FREE AND STANDARD JAW COUPLING Up to 9.600 Nm of torque and 130 mm bore GAS/SG e GAS 25 Technology for Safety 10-2018 GAS/SG-ST - backlash free jaw coupling «in steel»: introduction Made in steel
More informationROTEX. ROTEX mounting instructions design ZS-DKM and ZS-DKM-H. KTR-N sheet: edition: E 1 4
D-807 Rheine 022 E 1 ROTEX Torsionally flexible jaw-type couplings types ZS-DKM, ZS-DKM-H and their combinations design ZS-DKM1 according to Standard 9/9/EC (ATEX 95) for finish bored, pilot bored and
More informationPOLY-NORM. KTR-N Sheet: Edition: EN 1 of POLY-NORM Operating/Assembly instructions
1 of 30 Flexible jaw-type couplings AR, ADR, AVR, AZR, AR/AZR, AZVR, AR with taper clamping sleeve and their combinations Type AR according to directive 94/9/EC (ATEX 95) for finish bored, pilot bored
More information! C A U T I O N! Damages on the machine possible.
1 The PIK is a connecting element between electro motor and hydraulik pump in combination with an oil - air cooler. General Hints Please read through these mounting instructions carefully before you assemble
More informationMETALDRIVE Disc couplings
ETADRIVE Disc couplings ETADRIVE couplings are fully made of steel and are used in all applications where high reliability, precision and no maintenance are required. Features All steel made Superior disc
More informationROTEX. ROTEX Operating/Assembly instructions Type A-H EN 1 of KTR-N Sheet: Edition:
0226 EN 1 of 19 Torsionally flexible jaw-type couplings type A-H and their combinations according to directive 201/3/EU for finish bored, pilot bored and unbored couplings, Size 19-90, Size 100-125 Drawn:
More informationDATAFLEX 42/1000 Torque Measuring Shaft Operating/Assembly instructions DATAFLEX
DATAFLEX 4/1000 1 of 1 DATAFLEX Torque measuring shaft type 4/1000 Drawn: 017-01-0 Shg/Koe Replaced for: dated 015-04-13 Verified: 017-01-0 Shg Replaced by: DATAFLEX 4/1000 of 1 DATAFLEX is a maintenance-free
More informationFlexible Couplings N-EUPEX Series
Flexible Couplings N-EUPEX Series /2 Overview /3 Benefits /3 Application /3 Function /4 Design / Technical data /10 Type A for easy elastomer flexible replacement /10 Selection and ordering data /11 Type
More informationMAGNETIC COUPLINGS TYPES AND OPERATING DESCRIPTION
MAGNETIC COUPLINGS TYPES AND OPERATING DESCRIPTION General information General description MINEX -S magnetic couplings transmit the torque without contact through magnetic forces between the internal and
More informationROTEX SP "Non Sparking" Operating/Assembly instructions
1 of 27 Single-cardanic Torsionally flexible jaw couplings type GN, GND, EN and their combinations according to directive 2014/34/EU for finish bored, pilot bored and unbored couplings Type GN (No. 080)
More informationROTEX. KTR-N Sheet: Edition: EN 1 of ROTEX Operating/Assembly instructions Type ZS-DKM and ZS-DKM-H
1 of 24 Torsionally flexible jaw-type couplings ZS-DKM, ZS-DKM-H and their combinations Type ZS-DKM1 according to directive 2014/34/EU for finish bored, pilot bored and unbored couplings Type ZS-DKM3 Type
More informationARCUSAFLEX. Highly torsionally flexible rubber disc coupling for internal combustion engine drives
Your drive is our strength. Your strength is our drive. Highly torsionally flexible rubber disc for internal combustion engine drives Contents Page General... 3 Types... 4 Technical data standard version
More informationPOLY-NORM Operating/Assembly instructions
1 of 31 Flexible jaw-type couplings AR, ADR, AVR, AZR, AR/AZR, AZVR, AR with taper clamping sleeve and their combinations according to directive 2014/34/EU for finish bored, pilot bored and unbored couplings
More informationSPH Series GAM CAN, JUST ASK!
SPH Series GAM CAN, JUST ASK! - Highest Precision Class The SPH is GAM s latest solution for today s demanding motion control challenges. Available in six frame sizes and nominal torque ratings ranging
More informationInstallation and Operating Instructions for ROBA -ES couplings Type 940. _. _ Sizes 14-48
Table of contents: Please read and observe this Operating Instruction carefully. A possible malfunction or failure of the clutch and damage may be caused by not observing it. Page 1: - Table of contents
More informationJaw In-Shear 6 Pin Reduces Downtime, Maintenance, And Inventory Costs
Jaw In-Shear 6 Pin Reduces Downtime, Maintenance, And Inventory Costs Lovejoy's commitment to continual product improvement is demonstrated in the next generation of the Jaw In-Shear (JIS) coupling - the
More informationFLEXIBLE COUPLINGS - RIGID COUPLINGS Up to Nm of torque and 205 mm bores
Edition 10/2014 www.comintec.it FLEXIBLE COUPLINGS - RIGID COUPLINGS Up to 130.000 Nm of torque and 205 mm bores (BACKLASH FREE) Technology for Safety FLEXIBLE COUPLINGS - RIGID COUPLINGS (BACKLASH FREE):
More informationCOMBIBOX Program Schedule. Design. COMBIBOX Clutch-brake-combination type 10 / 09 / 06. Attachments input
COMBIBOX Program Schedule COMBIBOX Clutch-brake-combination type 10 / 09 / 06 with an energised to engage single sided clutch / brake COMBIBOX 10 page 37 with an energised to engage single sided clutch
More informationMETALDRIVE Disc Couplings
ETADRIVE Disc Couplings ETADRIVE ETADRIVE disc couplings ETADRIVE couplings are fully made of steel and are used in all applications where high reliability, precision, and no maintenance are required.
More informationInkoturn couplings. INKOMA - GROUP Couplings. Product description. Inkoturn couplings IKT. FRANCIS AND FRANCIS Ltd.
Product description The INKOM Inkoturn coupling (IKT) is a flexible coupling with high torsional rigidity, which has been developed for applications requiring high speed and where shaft is present. INKOM
More informationCurved Jaw Couplings. Curved Jaw Couplings From Lovejoy
Curved Jaw Couplings From Lovejoy Introduction For over 100 years Lovejoy Inc. has set the standard for straight jaw couplings in the United States and around the world. Now, Lovejoy Inc. is proud to present
More information