SLIM-SPLIT-BEARING KUNSTSTOFF-METALL-FORMTEILE

Transcription

1 SLIM-SPLIT-BEARING KUNSTSTOFF-METALL-FORMTEILE

2 Publishe by KMF Kunststoff-Metall-Formteile GmbH Postweg Bopfingen Phone 0736/7001 Fax 0736/7007 All rights reserve. Reprouction, also in extracts, only with authorisation of KMF. This publication was prouce very carefully an all ata were checke for correctness. However, we o not accept liability for any errors or incomplete ata. For reasons of further evelopment, we reserve the right to moify our proucts.

3 SLIM-SPLIT-BEARING This catalogue presents all SLIM- SPLIT-BEARING proucts of our company. The name SLIM-SPLIT-BEARING results ue to the splitte or opene bearing rings. Various bearings with various shapes an cross-cuts are available. All of them are manufacture with most moern an self-evelope manufacturing methos. These bearings are manufacture at the company KMF Kunststoff-Metall- Formteile uner consieration of highest precision, quality an repeatability. KUNSTSTOFF-METALL-FORMTEILE

4 Table of content SLIM-SPLIT-BEARING 8 Technical escription 9 escription of shape 9 Materials 9 Operating conitions 9 Sealing 9 Bearing Cross-Cuts 10 Features 10 Thin ring bearing PBXS 11 Fitte imensions 1 Table of imensions 1 Bearing imensions 1 Thin ring bearing PBXU 15 Fitte imensions 16 Table of imensions 16 Bearing imensions 16 Thin ring bearing PBXA 19 Fitte imensions 0 Table of imensions 0 Bearing imensions 0 Manufacturer comparative list Thin ring bearing PBXC 3 Fitte imensions 4 Table of imensions 4 Bearing imensions 4 Component parts PBXC 5 Manufacturer comparative list 6 Thin ring bearing PBX 7 Fitte imensions 8 Table of imensions 8 Bearing imensions 8 Manufacturer comparative list 30 Thin ring bearing PBS 31 Fitte imensions 3 Table of imensions 3 Bearing imensions 3 Manufacturer comparative list 34 Thin ring bearing PBC 35 Fitte imensions 36 Table of imensions 36 Bearing imensions 36 Manufacturer comparative list 38 Thin ring bearing PBXC & PBCX 39 Fitte imensions 40 Table of imensions 40 Bearing imensions 41 Whisper thin ring bearing PFXC 43 Fitte imensions 44 escription of shape 44 Operating conitions 44 Features 44 Table of imensions 44 Bearing imensions 44 Whisper thin ring bearing PFX 46 escription of shape 47 Operating conitions 47 Features 47 Fitte imensions 48 Table of imensions 48 Bearing imensions 48 Sleeve whisper thin ring bearing HFX 50 escription of shape 51 Operating conitions 51 Features 51 Fitte imensions 5 Table of imensions 5 Bearing imensions 5 Example of calculations for combine static strength an nominal service life 54 Calculation of Static Strength 56 Calculation of Service Life 57

5 AXIAL-SLIM-SPLIT-BEARING 58 Technical escription 59 escription of shape 59 Materials 59 Operating conitions 59 Features 59 Bearing Cross-Cuts 59 Ball thrust bearing PBAU 60 Fitte imensions 61 Table of imensions 61 Bearing imensions 61 Whisper-ball thrust bearing PFA 78 escription of shape 79 Operating conitions 79 Features 79 Fitte imensions 80 Table of imensions 80 Bearing imensions 80 Ball thrust bearing PBAA 64 Fitte imensions 65 Table of imensions 65 Bearing imensions 65 Ball thrust bearing PBAC 67 Fitte imensions 68 Table of imensions 68 Bearing imensions 68 Component parts PBAC 69 Ball thrust bearing PBAC metric 70 Fitte imensions 70 Table of imensions 70 Bearing imensions 70 Ball thrust bearing PBA 71 Fitte imensions 7 Table of imensions 7 Bearing imensions 7 Whisper-ball thrust bearing PFAC 74 escription of shape 75 Operating conitions 75 Features 75 Fitte imensions 76 Table of imensions 76 Bearing imensions 76 5

6 CROSSE-ROLLER- SLIM-SPLIT-BEARING 8 Crosse roller bearing PSX escription of shape 84 Materials 85 Operating conitions 85 Features 85 Fitte imensions 86 Table of imensions 86 Bearing imensions 86 Schrägrollenlager PSR escription of shape 89 Materials 89 Operating conitions 89 Features 89 Fitte imensions 90 Table of imensions 90 Bearing imensions 90 Axial - Schrägrollenlager PSA-08 9 Fitte imensions 94 Table of imensions 94 Bearing imensions 94 Important notices for all types of bearings 96 Initial operation an maintenance 96 Mounting an ismounting of bearings 97 Precision 97 Bearing play 97 Lubrication 98 The Conra-Filling-Metho 99 The KMF- Metho 100 Slewing bearing SLIM-SPLIT-BEARING 101 KMF-Thin Ring Bearing-Slewing bearing 10 Light silent an combine loaable 10 Thin ring bearing-slewing bearing YKT, YKTI, YKTA 104 imensions YKT (without gear) 105 Table of imensions YKT (without gear) 105 Table of imensions YKTI (inner gear) 106 Table of imensions YKTA (outer gear) 107 Example of orer YKT 108 Crosse roller bearing-slewing bearing PXU, PXI, PXA 109 Table of imensions PXU (without gear) 111 Table, Type series PXU, PXI, PXA (Number of bores, Basic loa ratings, Limiting spees) 11 Table of imensions, gear information PXI (internal gearteeth) 115 Table of imensions, gear information PXA (external gearteeth) 117 6

7 Thin ring bearing-slewing bearing PBV 118 Slewing bearings special configuration 119 Accessories Sealings 10 Sealing profiles 10 escription of shape 10 Materials 10 Operating conitions 10 Approach 1 irections to fin firm... 1

8 SLIM-SPLIT-BEARING Thin ring bearing PBXS 3,175 x 3,175 Thin ring bearing PBXU 4,5 x 4,5 Thin ring bearing PBXC 1,7 x 1,7 & Thin ring bearing PBCX 1,7 x 1,7 Thin ring bearing PBXA 6,35 x 6,35 Thin ring bearing PBXC 9,55 x 9,55 Whisper- Thin ring bearing PFXC 1,35 x 1,35 Thin ring bearing PBX 1,7 x 1,7 Whisper- Thin ring bearing PFXC 16,1 x 16,1 Thin ring bearing PBS 1,7 x 1,7 Sleeve-Whisper- Thin ring bearing HFX 1,95 x 1,95 Thin ring bearing PBC 1,7 x 1,7 Example of calculations for combine static strength an nominal service life 8

9 SLIM-SPLIT-BEARING Technical escription escription of shape A thin ring bearing generally means a single-row bearing, which has unepenant of the bore iameter stable quaratic cross-cuts within one type series. The main characteristic features of these bearings are their extremely thin-walle bearing rings. The KMF SLIM-SPLIT-BEARING is a four point contact ball bearing, which is able to take loas from all irections, such as axial, raial an moment loas, ue to the pressure angle of 90. Operating conitions The temperature limits of the stanar bearing in continuous operation are -40 C an +100 C, for short perios up to +10 C. For special applications with higher temperatures or for example in clean room, vacuum or meic technical ifferent options are possible; ceramic balls or aitional cage alternatives with ifferent materials like Teflon, PEEK, PTFE or PVF are also available. Sealing The bearing rings are manufacture by a special manufacturing process, which profiles, harens an bens the rings in one single operation without any mechanical work. The bearing rings are not close, but remain opene. That s why they have characteristics of wire ball bearing insert elements, but it is more easy to assemble complete units. The KMF-SLIM-SPLIT-BEARING is not seale. If a sealing system is necessary, it can be integrate irectly in the surrouning construction. Alternatively to conventional sealing systems in the market, KMF offers profile seals as yar-goos mae of Perbunan in many ifferent styles an shapes. (see page 86 Accesoires Sealing Profiles). The opene bearing rings enable the integration of a cage strip with hole an guie balls. A raceway system with more an bigger balls coul be realise. Compare with the classic thin section bearings, higher static an ynamic loa capacities can be achieve. Materials The KMF-SLIM-SPLIT-BEARINGS are manufacture in stainless steel. Bearing rings an balls are mae of stainless an aci-resistant steel X46Cr13 (material No ). The cage strip is mae of Polyamie 1. Thin ring bearing PBXU PBXA PBXC PBX Technical escription 9

10 SLIM-SPLIT-BEARING KUNSTSTOFF-METALL-FORMTEILE Bearing Cross-Cuts The KMF-SLIM-SPLIT-BEARING can be offere in the following cross-cuts: Cross-cuts Short sign S U A C Ê Ê imensions 3,175 x 3,175 4,5 x 4,5 6,35 x 6,35 9,55 x 9,55 1,7 x 1,7 1,7 x 1,7 1,7 x 1,7 KMF-type PBXS PBXU PBXA PBXC PBX PBS PBC KMF can supply all bearing types of the complete iameter range of each type series within short terms. Also all other imensions beneath the preferre series can be suplie within short terms as well. Features Free choice of material of the connecting parts, e. g. aluminium The splitte bearing rings eliminates functional ifficulties base on ifferent material expansions, e. g. ifferent material combinations as light metal steel an cast iron Corrosion resistant an low maintenance High static an ynamic Basic loa ratings High urability High rigiity Low Mass Easy to install an economical mounting an ismounting, as special fixtures are not necessary imensions beneath preferre series can be supplie within short terms 10 Technical escription

11 four point contact bearing SLIM-SPLIT-BEARING Thin ring bearing PBXS Thin ring bearing PBXS 11

12 SLIM-SPLIT-BEARING four point contact bearing KUNSTSTOFF-METALL-FORMTEILE Fitte imensions 1,75 Shaft Ø h7 Bearing imensions 15 3,175 1,15 3,1 +0,05 0,5 3, +0,05 3,175 R max 0,1 (3 x ) R 0, 1,15 1,75 Bore Ø H7 Table of imensions (Type series PBXS) KMF-type 1) Bearing imension Basic loa ratings Mass Limiting Axial Raial spees yn. yn. C a C oa C r C or n G grease inch kg min -1 PBXS ,10 1½ 44,45 1,3 4,0 1,1 1,61 0, PBXS 00 50,80 57,15 1,36 5,3 1,3,1 0, PBXS 05 63,50 ½ 69,85 1,47 6,6 1,33,60 0, PBXS ,0 3 8,55 1,58 7,9 1,43 3,15 0, PBXS ,90 3 ½ 95,5 1,67 9, 1,51 3,70 0, PBXS , ,95 1,75 10,5 1,58 4,0 0, PBXS ,95 4 ¼ 114,30 1,79 11, 1,59 4,48 0, PBXS ,30 4 ½ 10,65 1,83 11,8 1,65 4,75 0, PBXS ,65 4 ¾ 17,35 1,87 1,5 1,68 4,98 0, PBXS , ,35 1,90 13,1 1,71 5,0 0, PBXS ,70 5 ½ 146,05 1,96 14,4 1,77 5,80 0, PBXS , ,75,0 15,7 1,8 6,30 0, PBXS ,10 6 ½ 171,45,08 17,0 1,88 6,80 0,03 90 PBXS , ,15,14 18,3 1,93 7,30 0, PBXS ,50 7 ½ 196,85,19 19,6 1,98 7,80 0, PBXS ,0 8 09,55,5 0,9,03 8,40 0, PBXS ,90 8 ½,5,30,,07 8,90 0, PBXS 090 8, ,95,34 3,5,11 9,40 0, Thin ring bearing PBXS

13 four point contact bearing SLIM-SPLIT-BEARING 4 KMF-type 1) Bearing imension Basic loa ratings Mass Limiting Axial Raial spees yn. yn. C a C oa C r C or n G grease inch kg min -1 PBXS ,30 9 ½ 47,65,39 4,8,16 9,90 0, PBXS , ,35,44 6,0,0 10,40 0, PBXS ,70 10 ½ 73,05,48 7,5,4 11,00 0, PBXS , ,75,50 8,5,7 11,50 0, PBXS 115 9,10 11 ½ 98,45,55 30,0,31 1,00 0, PBXS , ,15,60 31,5,35 1,50 0, PBXS ,50 1 ½ 33,85,65 3,5,38 13,00 0, PBXS , ,55,70 34,0,4 13,60 0, PBXS ,90 13 ½ 349,5,70 35,0,45 14,10 0, PBXS , ,95,75 36,5,48 14,60 0, PBXS ,30 14 ½ 374,65,80 38,0,50 15,10 0, PBXS , ,35,80 39,0,55 15,70 0, PBXS ,70 15 ½ 400,05,85 40,5,60 16,0 0, PBXS , ,75,90 41,5,60 16,70 0, PBXS ,10 16 ½ 45,45,90 43,0,65 17,0 0, PBXS , ,15,95 44,5,65 17,70 0, PBXS ,50 17 ½ 450,85 3,00 45,5,70 18,0 0, PBXS , ,55 3,00 47,0,70 18,0 0, PBXS ,90 18 ½ 476,5 3,05 48,0,75 19,30 0,09 30 PBXS , ,95 3,10 49,5,75 19,80 0, PBXS ,30 19 ½ 501,65 3,10 51,0, , PBXS , ,35 3,15 5,0,85 0,90 0, PBXS , ,75 3,0 55,0,90 1,90 0, PBXS 0 558,80 565,15 3,5 57,0,95,90 0, PBXS , ,55 3,30 60,0 3,00 4,00 0, PBXS 40 PBXS 50 PBXS 60 PBXS 70 PBXS 80 PBXS ,60 635,00 660,40 685,80 711,0 736, ,95 641,35 666,75 69,15 717,55 74,95 3,35 3,40 3,45 3,50 3,55 3,60 63,0 65,0 68,0 70,0 73,0 76,0 3,00 3,05 3,10 3,15 3,0 3,5 5,00 6,00 7,00 8,00 9,00 30,00 0,10 0,15 0,130 0,135 0,140 0, ) Other imensions on request PBXS , ,35 3,65 78,0 3,30 31,50 0, Thin ring bearing PBXS 13

14 SLIM-SPLIT-BEARING four point contact bearing KUNSTSTOFF-METALL-FORMTEILE Exclusively with KMF: With the type series PBXS an PBXU we can offer our customer thin ring bearings with minimum bearing cross-cuts an large iameters. 14 Thin ring bearing PBXS

15 four point contact bearing SLIM-SPLIT-BEARING Thin ring bearing PBXU Thin ring bearing PBXU 15

16 SLIM-SPLIT-BEARING four point contact bearing KUNSTSTOFF-METALL-FORMTEILE Fitte imensions Bearing imensions 1,75 Shaft Ø h7 15 4,5 1,75 1 4,4 +0,05 4,55 +0,05 4,5 Rmax 0,3 R 0,5 1,75 1,75 Bore Ø H7 Table of imensions (Type series PBXU) KMF-type 1) Bearing imension Basic loa ratings Mass Limiting spees Axial Raial yn. yn. C a C oa C r C or n G grease kg min -1 PBXU ,50 6,6,8,65 0, PBXU ,65 7,6,41 3,05 0, PBXU ,80 8,6,50 3,45 0, PBXU ,85 9,3,60 3,75 0, PBXU ,90 10,3,70 4,10 0,0 780 PBXU ,00 11,3,80 4,50 0, PBXU ,10 1,0,85 4,80 0, PBXU ,0 13,0,90 5,0 0, PBXU ,30 14,0 3,00 5,60 0, PBXU ,40 15,0 3,10 6,00 0, PBXU ,45 15,7 3,10 6,30 0, PBXU ,55 16,7 3,0 6,70 0, PBXU ,60 17,7 3,5 7,10 0, PBXU ,70 18,7 3,35 7,50 0, PBXU ,80 0,4 3,45 8,0 0, PBXU ,90,4 3,55 9,00 0, PBXU ,00 4,1 3,65 9,60 0, PBXU 0140 PBXU ,15 4,5 6,0 8,0 3,75 3,85 10,40 11,10 0,055 0, Thin ring bearing PBXU

17 four point contact bearing SLIM-SPLIT-BEARING 4 KMF-type 1) Bearing imension Basic loa ratings Mass Limiting spees Axial Raial yn. yn. C a C oa C r C or n G grease kg min -1 PBXU ,35 30,0 3,95 11,90 0, PBXU ,45 31,5 4,00 1,60 0, PBXU ,55 33,5 4,10 13,40 0, PBXU ,65 35,0 4,5 14,10 0, PBXU ,65 37,0 4,5 14,80 0, PBXU ,80 39,0 4,35 15,0 0, PBXU ,85 40,5 4,40 16,0 0, PBXU ,95 4,5 4,50 17,00 0, PBXU ,00 44,5 4,55 17,70 0, PBXU ,10 46,5 4,65 18,50 0, PBXU ,0 48,0 4,70 19,0 0, PBXU ,30 50,0 4,75 0,00 0, PBXU ,30 5,0 4,80 0,70 0, PBXU ,40 54,0 4,90 1,50 0, PBXU ,50 55,0 4,95,0 0, PBXU ,50 57,0 5,00 3,00 0, PBXU ,60 59,0 5,10 3,60 0, PBXU ,70 61,0 5,10 4,40 0, PBXU ,70 63,0 5,0 5,00 0, PBXU ,80 65,0 5,0 6,00 0, PBXU ,80 67,0 5,30 6,50 0, PBXU ,90 68,0 5,30 7,50 0, PBXU ,00 70,0 5,40 8,00 0, PBXU ,00 7,0 5,40 9,00 0, PBXU ,10 74,0 5,50 9,50 0, PBXU ,10 76,0 5,50 30,50 0, PBXU ,0 78,0 5,60 31,00 0, PBXU ,0 80,0 5,60 3,00 0, PBXU ,30 81,0 5,70 3,50 0, PBXU ,30 83,0 5,70 33,00 0, PBXU ,40 85,0 5,80 34,00 0, PBXU 0470 PBXU ,40 6,50 87,0 89,0 5,80 5,90 34,50 35,50 0,185 0, Thin ring bearing PBXU 17

18 SLIM-SPLIT-BEARING four point contact bearing KUNSTSTOFF-METALL-FORMTEILE 4 KMF-type 1) Bearing imension Basic loa ratings Mass Limiting spees Axial Raial yn. yn. C a C oa C r C or n G grease kg min -1 PBXU ,50 90,0 5,90 36,00 0, PBXU ,60 9,0 5,90 37,00 0, PBXU ,60 94,0 6,00 37,50 0, PBXU ,70 96,0 6,00 38,50 0,05 90 PBXU ,70 98,0 6,10 39,00 0,09 90 PBXU ,80 100,0 6,10 40,00 0,13 80 PBXU ,80 10,0 6,0 40,50 0,17 80 PBXU ,90 103,0 6,0 41,50 0,1 70 PBXU ,90 105,0 6,0 4,00 0,5 70 PBXU ,90 107,0 6,30 43,00 0,9 60 PBXU ,00 109,0 6,30 43,50 0,33 60 PBXU ,00 111,0 6,40 44,50 0,37 50 PBXU ,10 113,0 6,40 45,00 0,41 50 PBXU ,10 115,0 6,40 46,00 0,45 50 PBXU ,0 116,0 6,50 46,50 0,49 40 PBXU ,0 118,0 6,50 47,50 0,53 40 PBXU ,30 10,0 6,6 48,0 0,57 35 PBXU ,30 1,0 6,60 49,00 0,61 30 PBXU ,40 14,0 6,70 49,70 0,65 30 PBXU ,40 15,0 6,70 50,50 0,69 5 PBXU ,50 17,0 6,80 51,0 0,73 0 PBXU ,50 19,0 6,80 51,90 0,77 0 PBXU ,60 131,0 6,80 5,70 0,81 15 PBXU ,60 133,0 6,90 53,40 0,85 15 PBXU ,70 135,0 6,90 54,0 0,89 10 PBXU ,70 137,0 7,00 54,90 0,93 10 PBXU ,80 138,0 7,00 55,70 0,96 05 PBXU ,80 140,0 7,10 56,40 0, PBXU ,90 14,0 7,10 57,10 0, PBXU ,90 144,0 7,0 57,90 0, PBXU ,00 146,0 7,0 58,60 0, PBXU ,00 148,0 7,30 59,40 0, ) Other imensions on request 18 Thin ring bearing PBXU

19 four point contact bearing SLIM-SPLIT-BEARING Thin ring bearing PBXA Thin ring bearing PBXA 19

20 SLIM-SPLIT-BEARING four point contact bearing KUNSTSTOFF-METALL-FORMTEILE Fitte imensions Bearing imensions 15,35 Shaft Ø h7 6,35,35 1 6,5 +0,05 6,4 +0,05 6,35 R max 0,3 (3 x ) R 0,5,35,35 Bore Ø H7 Table of imensions (Type series PBXA) KMF-type 1) Bearing imension Basic loa ratings Mass Limiting Axial Raial spees yn. yn. C a C oa C r C or n G grease inch kg min -1 PBXA 00 50,80 63,50 3,75 11,0 3,40 4,4 0, PBXA 05 63,50 ½ 76,0 4,10 13,7 3,70 5,5 0, PBXA ,0 3 88,90 4,35 16,4 4,00 6,6 0, PBXA ,90 3 ½ 101,60 4,60 19, 4,0 7,7 0, PBXA , ,30 4,85 1,9 4,40 8,8 0, PBXA ,95 4 ¼ 10,65 4,95 3,1 4,50 9, 0, PBXA ,30 4 ½ 17,00 5,10 4,6 4,60 9,9 0, PBXA ,65 4 ¾ 133,35 5,10 6,0 4,65 10,3 0, PBXA , ,70 5,30 7,5 4,75 11,0 0, PBXA ,70 5 ½ 15,40 5,50 30,0 4,95 1,0 0, PBXA , ,10 5,60 3,5 5,10 13,0 0, PBXA ,10 6 ½ 177,80 5,80 35,0 5,0 14,1 0,13 90 PBXA , ,50 5,90 38,0 5,40 15, 0, PBXA ,50 7 ½ 03,0 6,10 40,5 5,50 16,3 0, PBXA ,0 8 15,90 6,0 43,5 5,60 17,4 0, PBXA ,90 8 ½ 8,60 6,40 46,0 5,80 18,5 0, PBXA 090 8, ,30 6,50 49,0 5,90 19,6 0, PBXA ,30 9 ½ 54,00 6,60 5,0 6,00 0,7 0, Thin ring bearing PBXA

21 four point contact bearing SLIM-SPLIT-BEARING 4 KMF-type 1) Bearing imension Basic loa ratings Mass Limiting Axial Raial spees yn. yn. C a C oa C r C or n G grease inch kg min -1 PBXA , ,70 6,80 54,0 6,10 1,8 0,0 600 PBXA ,70 10 ½ 79,40 6,90 57,0 6,0,7 0,1 570 PBXA , ,10 7,00 59,0 6,30 3,8 0, 550 PBXA 115 9,10 11 ½ 304,80 7,10 6,0 6,40 4,9 0,3 50 PBXA , ,50 7,0 65,0 6,50 6,0 0,4 500 PBXA ,50 1 ½ 330,0 7,0 66,0 6,60 6,5 0,5 480 PBXA , ,90 7,40 70,0 6,70 8,0 0,6 460 PBXA ,90 13 ½ 355,60 7,50 73,0 6,80 9,5 0,7 450 PBXA , ,30 7,40 76,0 6,90 30,5 0,8 430 PBXA ,30 14 ½ 381,00 7,70 78,0 7,00 31,5 0,9 410 PBXA , ,70 7,80 81,0 7,10 3,5 0, PBXA ,70 15 ½ 406,40 7,90 84,0 7,10 33,5 0, PBXA , ,10 8,00 86,0 7,0 34,5 0,3 380 PBXA ,10 16 ½ 431,80 8,10 89,0 7,30 35,5 0, PBXA , ,50 8,0 9,0 7,40 37,0 0, PBXA ,50 17 ½ 457,0 8,30 95,0 7,50 38,0 0, PBXA , ,90 8,40 97,0 7,60 39,0 0, PBXA ,90 18 ½ 48,60 8,40 100,0 7,60 40,0 0,37 30 PBXA , ,30 8,50 103,0 7,70 41,0 0,38 30 PBXA ,30 19 ½ 508,00 8,60 105,0 7,80 4,0 0, PBXA , ,70 8,70 108,0 7,80 43,0 0, PBXA , ,10 8,80 113,0 8,00 45,5 0,41 90 PBXA 0 558,80 571,50 9,00 119,0 8,10 47,5 0,43 70 PBXA , ,90 9,10 14,0 8,0 49,5 0,45 60 PBXA ,60 4 6,30 9,30 130,0 8,40 5,0 0,47 50 PBXA , ,70 9,40 135,0 8,50 54,0 0,49 40 PBXA , ,10 9,50 140,0 8,60 56,0 0,51 30 PBXA , ,50 9,70 146,0 8,70 58,0 0,53 0 PBXA ,0 8 73,90 9,80 151,0 8,70 60,0 0,55 10 PBXA , ,30 9,90 156,0 9,00 63,0 0,57 10 PBXA , ,70 10,10 16,0 9,10 65,0 0, ) Other imensions on request Thin ring bearing PBXA 1

22 SLIM-SPLIT-BEARING Vierpunktlager KUNSTSTOFF-METALL-FORMTEILE Manufacturer comparative list Bearing imension KMF-type KAYON- FAG-type SKF-type INA-type Franke- inch type type PBXA 00 50,80 63,50 KA 00 XPO L18QA00T FPXA 00 CSXA 00 PBXA 05 63,50 ½ 76,0 KA 05 XPO L18QA08T FPXA 08 CSXA 05 PBXA ,0 3 88,90 KA 030 XPO L18QA300T FPXA 300 CSXA 030 PBXA ,90 3 ½ 101,60 KA 035 XPO L18QA308YH FPXA 308 CSXA 035 PBXA , ,30 KA 040 XPO L18QA400T FPXA 400 CSXA 040 PBXA ,95 4 ¼ 10,65 KA 04 XPO L18QA404YH FPXA 404 CSXA 04 PBXA ,30 4 ½ 17,00 KA 045 XPO L18QA408YH FPXA 408 CSXA 045 PBXA ,65 4 ¾ 133,35 KA 047 XPO L18QA41YH FPXA 41 CSXA 047 PBXA , ,70 KA 050 XPO L18QA500YH FPXA 500 CSXA 050 PBXA ,70 5 ½ 15,40 KA 055 XPO L18QA508YH FPXA 508 CSXA 055 PBXA , ,10 KA 060 XPO L18QA600YH FPXA 600 CSXA 060 PBXA ,10 6 ½ 177,80 KA 065 XPO L18QA608YH FPXA 608 CSXA 065 PBXA , ,50 KA 070 XPO L18QA700YH FPXA 700 CSXA 070 PBXA ,50 7 ½ 03,0 KA 075 XPO L18QA708YH FPXA 708 CSXA 075 PBXA ,0 8 15,90 KA 080 XPO L18QA800YH FPXA 800 CSXA 080 PBXA ,90 8 ½ 8,60 PBXA 090 8, ,30 KA 090 XPO L18QA900YH FPXA 900 CSXA 090 PBXA ,30 9 ½ 54,00 PBXA , ,70 KA100 XPO L18QA1000YH FPXA 1000 CSXA 100 PBXA ,70 10 ½ 79,40 PBXA , ,10 KA 110 XPO L18QA1100YH FPXA 1100 CSXA 110 PBXA 115 9,10 11 ½ 304,80 PBXA , ,50 KA 10 XPO L18QA100YH FPXA 100 CSXA 10 PBXA ,50 1 ½ 330,0 PBXA , ,90 PBXA ,90 13 ½ 355,60 PBXA , ,30 PBXA ,30 14 ½ 381,00 PBXA , ,70 Ê , ,70 Ê ) For this KMF-type series (Steps of 5) no types of other manufacturers o exist Thin ring bearing PBXA

23 four point contact bearing SLIM-SPLIT-BEARING Thin ring bearing PBXC Thin ring bearing PBXC 3

24 SLIM-SPLIT-BEARING four point contact bearing KUNSTSTOFF-METALL-FORMTEILE Fitte imensions 15 3,5 Shaft Ø h7 Bearing imensions 9,55 3,5 9,4 +0,05 9,6 +0,05 9,55 R max 0,3 R 0,5 3,5 3,5 Bore Ø H7 Table of imensions (Type series PBXC) KMF-type 1) Bearing imension Basic loa ratings Mass Limiting Axial Raial spees yn. yn. C a C oa C r C or n G grease inch kg min -1 PBXC , ,65 9,30 37,0 8,50 14,7 0, PBXC ,95 4 ¼ 17,00 9,60 39,5 8,70 15,8 0, PBXC ,30 4 ½ 133,35 9,70 41,0 8,80 16,5 0, PBXC ,65 4 ¾ 139,70 10,00 44,0 9,00 17,5 0,1 170 PBXC , ,05 10,10 45,5 9,10 18, 0, 100 PBXC ,70 5 ½ 158,75 10,60 51,0 9,60 0,3 0, PBXC , ,45 10,90 55,0 9,80,1 0, PBXC ,10 6 ½ 184,15 11,0 60,0 10,10 3,9 0,8 90 PBXC , ,85 11,50 64,0 10,40 5,5 0, PBXC ,50 7 ½ 09,55 11,70 68,0 10,60 7,5 0,3 800 PBXC ,0 8,5 1,00 73,0 10,90 9,0 0, PBXC ,90 8 ½ 34,95 1,0 77,0 11,10 31,0 0, PBXC 090 8, ,65 1,50 8,0 11,30 3,5 0, PBXC ,30 9 ½ 60,35 1,80 87,0 11,60 35,0 0, PBXC , ,05 13,00 91,0 11,80 36,5 0, PBXC ,70 10 ½ 85,75 13,30 96,0 1,00 38,5 0, PBXC , ,45 13,50 100,0 1,0 40,0 0, PBXC 115 9,10 11 ½ 311,15 13,70 105,0 1,40 4,0 0, Thin ring bearing PBXC

25 four point contact bearing SLIM-SPLIT-BEARING 4 KMF-type 1) Bearing imension Basic loa ratings Mass Limiting Axial Raial spees yn. yn. C a C oa C r C or n G grease inch kg min -1 PBXC , ,85 13,90 109,0 1,60 43,5 0, PBXC , ,5 14,30 118,0 1,90 47,0 0, PBXC , ,65 14,70 17,0 13,30 51,0 0, PBXC , ,05 15,10 136,0 13,60 54,0 0, PBXC , ,45 15,40 145,0 13,90 58,0 0, PBXC , ,85 15,70 154,0 14,0 6,0 0, PBXC , ,5 16,10 163,0 14,50 65,0 0,7 330 PBXC , ,65 16,40 17,0 14,80 69,0 0,76 30 PBXC , ,05 16,70 181,0 15,10 7,0 0, PBXC , ,45 17,00 190,0 15,40 76,0 0,83 90 PBXC 0 558,80 577,85 17,30 199,0 15,60 79,0 0,87 70 PBXC , ,5 17,60 08,0 15,90 83,0 0,91 60 PBXC , ,65 17,90 17,0 16,10 87,0 0,95 50 PBXC , ,05 18,10 6,0 16,40 90,0 0,98 40 PBXC , ,45 18,40 35,0 16,60 94,0 1,0 30 PBXC , ,85 18,70 45,0 16,90 98,0 1,06 0 PBXC , ,5 18,90 55,0 17,10 101,0 1,10 10 PBXC , ,65 19,10 60,0 17,30 105,0 1,14 10 PBXC , ,05 19,30 70,0 17,50 108,0 1,18 00 PBXC , ,45 19,60 80,0 17,70 11,0 1, 190 PBXC 30 81, ,85 19,80 90,0 17,90 116,0 1,6 190 PBXC , ,5 0,00 300,0 18,10 119,0 1, PBXC , ,65 0,30 305,0 18,50 13,0 1, ) Other imensions on request Component parts PBXC 1 Bearing outer ring Conforme Raceway Bearing inner ring 3 Conforme Raceway 3 Cage strip with balls Balls hole an guie 1 Thin ring bearing PBXC 5

26 SLIM-SPLIT-BEARING four point contact bearing KUNSTSTOFF-METALL-FORMTEILE Manufacturer comparative list Bearing imension KMF-type KAYON- FAG-type SKF-type INA-type Franke-type inch type PBXC , ,65 KC040XPO L18SA400T FPXC400 CSXC PBXC ,95 4 ¼ 17,00 KC04XPO L18SA404T FPXC404 CSXC PBXC ,30 4 ½ 133,35 KC045XPO L18SA408T FPXC408 CSXC PBXC ,65 4 ¾ 139,70 KC047XPO L18SA41T FPXC41 CSXC047 LFC 4,75 PBXC , ,05 KC050XPO L18SA500T FPXC500 CSXC050 LFC 5 PBXC ,70 5 ½ 158,75 KC055XPO L18SA508YH FPXC508 CSXC055 LFC 5,5 PBXC , ,45 KC060XPO L18SA600YH FPXC600 CSXC060 LFC 6 PBXC ,10 6 ½ 184,15 KC065XPO L18SA608YH FPXC608 CSXC065 LFC 6,5 PBXC , ,85 KC070XPO L18SA700YH FPXC700 CSXC070 LFC 7 PBXC ,50 7 ½ 09,55 KC075XPO L18SA708YH FPXC708 CSXC075 LFC 7,5 PBXC ,0 8,5 KC080XPO L18SA800YH FPXC800 CSXC080 LFC 8 PBXC ,90 8 ½ 34,95 PBXC 090 8, ,65 KC090XPO L18SA900YH FPXC900 CSXC090 LFC 9 PBXC ,30 9 ½ 60,35 PBXC , ,05 KC100XPO L18SA1000YH FPXC1000 CSXC100 LFC 10 PBXC ,70 10 ½ 85,75 PBXC , ,45 KC110XPO L18SA1100YH FPXC1100 CSXC110 LFC 11 PBXC 115 9,10 11 ½ 311,15 PBXC , ,85 KC10XPO L18SA100YH FPXC100 CSXC10 LFC 1 PBXC , ,5 PBXC , ,65 KC140XPO FPXC1400 CSXC140 LFC 14 PBXC , ,05 PBXC , ,45 KC160XPO FPXC1600 CSXC160 LFC 16 PBXC , ,85 PBXC , ,5 KC180XPO FPXC1800 CSXC180 LFC 18 PBXC , ,65 PBXC , ,05 KC00XPO FPXC000 CSXC00 LFC 0 Ê 50 Ê ,00 76, ,05 781,05 KC50XPO KC300XPO FPXC500 FPXC3000 CSXC50 CSXC300 LFC 5 Ê , ,65 Ê ) For this KMF-type series (Steps of 10) no types of other manufacturers o exist 6 Thin ring bearing PBXC

27 four point contact bearing SLIM-SPLIT-BEARING Thin ring bearing PBX Thin ring bearing PBX 7

28 SLIM-SPLIT-BEARING four point contact bearing KUNSTSTOFF-METALL-FORMTEILE Fitte imensions 15 4,7 Shaft Ø h7 Bearing imensions 1,7 4,7 1,60 +0,05 1,75 +0,05 1,7 R max 0,6 (3 x ) R 1 4,7 4,7 Bore Ø H7 Table of imensions (Type series PBX) KMF-type 1) Bearing imension Basic loa ratings Mass Limiting Axial Raial spees yn. yn. C a C oa C r C or n G grease inch kg min -1 PBX , ,00 18,3 59,0 16,6 3,7 0, PBX ,95 4 ¼ 133,35 18,9 64,0 17, 5,5 0, PBX ,30 4 ½ 139,70 19,4 68,0 17,6 7,0 0, PBX ,65 4 ¾ 146,05 19,5 70,0 17,7 8,0 0, PBX , ,40 0,0 75,0 18, 30,0 0, PBX ,70 5 ½ 165,10 0,6 81,0 18,7 3,5 0, PBX , ,80 1,5 90,0 19,5 36,0 0, PBX ,10 6 ½ 190,50,1 97,0 0,0 39,0 0, PBX , ,0,6 104,0 0,5 41,5 0, PBX ,50 7 ½ 15,90 3,3 11,0 1, 45,0 0, PBX ,0 8 8,60 3,8 119,0 1,6 47,5 0, PBX ,90 8 ½ 41,30 4, 16,0,0 50,0 0, PBX 090 8, ,00 4,9 135,0,6 54,0 0, PBX ,30 9 ½ 66,70 5,5 141,0,9 57,0 0, PBX 100 PBX ,00 66, ½ 79,40 9,10 5,5 6,5 148,0 157,0 3,3 3,9 59,0 63,0 0,779 0, Thin ring bearing PBX

29 four point contact bearing SLIM-SPLIT-BEARING 4 KMF-type 1) Bearing imension Basic loa ratings Mass Limiting Axial Raial spees yn. yn. C a C oa C r C or n G grease inch kg min -1 PBX , ,80 6,5 163,0 4, 65,0 0, PBX 115 9,10 11 ½ 317,50 7,0 170,0 4,5 68,0 0, PBX , ,0 7,5 179,0 5,0 7,0 0, PBX , ,60 8,5 19,0 5, 77,0 1, PBX , ,00 9,0 08,0 6,5 83,0 1, PBX , ,40 30,0 3,0 7,0 89,0 1, PBX , ,80 30,5 37,0 7,0 95,0 1,5 380 PBX , ,0 31,5 50,0 8,5 101,0 1, PBX , ,60 3,0 70,0 9,0 107,0 1, PBX , ,00 3,5 80,0 9,5 11,0 1, PBX , ,40 33,0 95,0 30,0 119,0 1, PBX , ,80 33,5 310,0 30,5 14,0 1, PBX 0 558,80 584,0 34,5 35,0 31,0 130,0 1, PBX , ,60 34,5 340,0 31,5 136,0 1, PBX , ,00 35,5 355,0 3,0 14,0 1, PBX , ,40 36,0 370,0 3,5 148,0 1,89 40 PBX , ,80 36,5 385,0 33,0 154,0 1, PBX , ,0 37,0 400,0 33,5 159,0,041 0 PBX , ,60 37,5 415,0 34,0 166,0, PBX , ,00 38,0 430,0 34,5 17,0, PBX , ,40 38,5 445,0 34,5 177,0,64 00 PBX , ,80 39,0 460,0 35,0 183,0, PBX 30 81, ,0 39,5 475,0 35,5 190,0, PBX , ,60 39,5 485,0 36,0 195,0, PBX , ,00 40,0 500,0 36,5 01,0, PBX , ,40 43,4 588,0 39,6 37,0 3, PBX ,70 40 ½ 1054,10 43,7 596,0 39,8 40,0 3, PBX ,45 41 ¾ 1085,85 44,3 614,0 40,5 47,0 3, PBX , ,0 44,5 618,0 40,6 49,0 3, ) Other imensions on request Thin ring bearing PBX 9

30 SLIM-SPLIT-BEARING four point contact bearing KUNSTSTOFF-METALL-FORMTEILE Manufacturer comparative list Bearing imension KMF-type KAYON- FAG-type SKF-type INA-type Franke- inch type type PBX , ,00 K 040 XPO L18TA 400T FPX 400 CSX 040 PBX ,95 4 ¼ 133,35 K 04 XPO L18TA 404T FPX 404 CSX 04 PBX ,30 4 ½ 139,70 K 045 XPO L18TA 408T FPX 408 CSX 045 PBX ,65 4 ¾ 146,05 K 047 XPO L18TA 41T FPX 41 CSX 047 PBX , ,40 K 050 XPO L18TA 500T FPX 500 CSX 050 PBX ,70 5 ½ 165,10 K 055 XPO L18TA 508T FPX 508 CSX 055 PBX , ,80 K 060 XPO L18TA 600T FPX 600 CSX 060 LF 6 PBX ,10 6 ½ 190,50 K 065 XPO L18TA 608T FPX 608 CSX 065 LF 6,5 PBX , ,0 K 070 XPO L18TA 700T FPX 700 CSX 070 LF 7 PBX ,50 7 ½ 15,90 K 075 XPO L18TA 708T FPX 708 CSX 075 LF 7,5 PBX ,0 8 8,60 K 080 XPO L18TA 800T FPX 800 CSX 080 LF 8 PBX ,90 8 ½ 41,30 PBX 090 8, ,00 K 090 XPO L18TA 900T FPX 900 CSX 090 LF 9 PBX ,30 9 ½ 66,70 PBX , ,40 K 100 XPO L18TA 1000T FPX 1000 CSX 100 LF 10 PBX ,70 10 ½ 9,10 PBX , ,80 K 110 XPO L18TA 1100T FPX 1100 CSX 110 LF 11 PBX 115 9,10 11 ½ 317,50 PBX , ,0 K 10 XPO L18TA 100T FPX 100 CSX 10 LF 1 PBX , ,60 PBX , ,00 K 140 XPO L18TA 1400T FPX 1400 CSX 140 LF 14 PBX , ,40 PBX , ,80 K 160 XPO L18TA 1600T FPX 1600 CSX 160 LF 16 PBX , ,0 PBX , ,60 K 180 XPO L18TA 1800T FPX 1800 CSX 180 LF 18 PBX , ,00 PBX 00 Ê 50 Ê ,00 635,00 76, ,40 660,40 787,40 K 00 XPO K 50 XPO K 300 XPO FPX 000 FPX 500 FPX 3000 CSX 00 CSX 50 CSX 300 LF 0 LF 5 Ê , ,00 Ê ) For this KMF-type series (Steps of 10) no types of other manufacturers o exist 30 Thin ring bearing PBX

31 angular contact ball bearing SLIM-SPLIT-BEARING Thin ring bearing PBS Thin ring bearing PBS 31

32 SLIM-SPLIT-BEARING angular contact ball bearing KUNSTSTOFF-METALL-FORMTEILE Fitte imensions R max 0,6 (3 x ) Bearing imensions 4,7 Shaft Ø h7 1,7 4,7 1,60 +0,05 1,75 +0,05 1,7 R 1 4,7 4,7 15 Bore Ø H7 Table of imensions (Type series PBS) KMF-type 1) Bearing imension Basic loa ratings Mass Limiting Axial Raial spees yn. yn. C a C oa C r ) C or ) n G grease inch kg min -1 PBS , ,00 19,3 59,0 10, 11,9 0, PBS ,95 4 ¼ 133,35 19,9 64,0 10,5 1,7 0, PBS ,30 4 ½ 139,70 0,5 68,0 10,8 13,6 0, PBS ,65 4 ¾ 146,05 0,6 70,0 10,9 14,1 0, PBS , ,40 1, 75,0 11, 15,0 0, PBS ,70 5 ½ 165,10 1,8 81,0 11,5 16,3 0, PBS , ,80,7 90,0 1,0 18,1 0,48 00 PBS ,10 6 ½ 190,50 3,3 97,0 1,3 19,4 0, PBS , ,0 3,8 104,0 1,6 0,7 0, PBS ,50 7 ½ 15,90 4,6 11,0 13,0,5 0, PBS ,0 8 8,60 5,0 119,0 13, 3,8 0, PBS ,90 8 ½ 41,30 5,5 16,0 13,5 5,0 0, PBS 090 8, ,00 6,5 135,0 13,9 7,0 0, PBS ,30 9 ½ 66,70 6,5 141,0 14,1 8,5 0, PBS 100 PBS ,00 66, ½ 79,40 9,10 7,0 8,0 148,0 157,0 14,3 14,7 9,5 31,5 0,779 0, Thin ring bearing PBS

33 angular contact ball bearing SLIM-SPLIT-BEARING 4 KMF-type 1) Bearing imension Basic loa ratings Mass Limiting Axial Raial spees yn. yn. C a C oa C r C or inch PBS , ,80 8,0 163,0 14,9 3,5 PBS 115 9,10 11 ½ 317,50 8,5 170,0 15,1 34,0 PBS , ,0 9,0 179,0 15,4 36,0 PBS , ,60 30,0 19,0 15,7 38,5 PBS , ,00 30,5 08,0 16, 41,5 PBS , ,40 31,5 3,0 16,6 44,5 PBS , ,80 3,0 37,0 17,0 47,5 PBS , ,0 33,0 50,0 17,4 50,0 PBS , ,60 33,5 70,0 17,8 54,0 PBS , ,00 34,5 80,0 18,1 56,0 PBS , ,40 35,0 95,0 18,4 59,0 PBS , ,80 35,5 310,0 18,7 6,0 PBS 0 558,80 584,0 36,0 35,0 19,0 65,0 PBS , ,60 37,0 340,0 19,4 68,0 PBS , ,00 37,5 355,0 19,6 71,0 PBS , ,40 38,0 370,0 19,9 74,0 PBS , ,80 38,5 385,0 0,3 77,0 PBS , ,0 39,0 400,0 0,5 80,0 PBS , ,60 39,5 415,0 0,8 83,0 PBS , ,00 40,0 430,0 1,1 86,0 PBS , ,40 40,5 445,0 1,3 89,0 PBS , ,80 41,0 460,0 1,6 9,0 PBS 30 81, ,0 41,5 475,0 1,8 95,0 PBS , ,60 4,0 485,0,0 97,0 PBS , ,00 4,5 500,0,3 101,0 PBS , ,40 46,1 588,0 4, 119,0 PBS ,70 40 ½ 1054,10 46,4 596,0 4,3 10,5 PBS ,45 41 ¾ 1085,85 47,1 614,0 4,7 14,0 PBS , ,0 47,3 618,0 4,8 15,0 1) Other imensions on request ) With in pairs arrange camps is vali: C or x un C r x 1,65 kg 0,853 0,891 0,98 1,00 1,076 1,150 1,5 1,99 1,373 1,447 1,51 1,596 1,670 1,744 1,818 1,89 1,967,041,115,189,64,338,41,486,560 3,01 3,049 3,143 3,16 n G grease min Thin ring bearing PBS 33

34 SLIM-SPLIT-BEARING angular contact ball bearing KUNSTSTOFF-METALL-FORMTEILE Manufacturer comparative list Bearing imension KMF-type KAYON- FAG-type SKF-type INA-type Franke- inch type type PBS , ,00 K 040 AR0 L15TA 400YP FPA 400 CSA 040 PBS ,95 4 ¼ 133,35 K 04 AR0 L15TA 404YP FPA 404 CSA 04 PBS ,30 4 ½ 139,70 K 045 AR0 L15TA 408YP FPA 408 CSA 045 PBS ,65 4 ¾ 146,05 K 047 AR0 L15TA 41YP FPA 41 CSA 047 PBS , ,40 K 050 AR0 L15TA 500YP FPA 500 CSA 050 PBS ,70 5 ½ 165,10 K 055 AR0 L15TA 508YP FPA 508 CSA 055 PBS , ,80 K 060 AR0 L15TA 600YP FPA 600 CSA 060 PBS ,10 6 ½ 190,50 K 065 AR0 L15TA 608YP FPA 608 CSA 065 PBS , ,0 K 070 AR0 L15TA 700YP FPA 700 CSA 070 PBS ,50 7 ½ 15,90 K 075 AR0 L15TA 708YP FPA 708 CSA 075 PBS ,0 8 8,60 K 080 AR0 L15TA 800YP FPA 800 CSA 080 PBS ,90 8 ½ 41,30 PBS 090 8, ,00 K 090 AR0 L15TA 900YP FPA 900 CSA 090 PBS ,30 9 ½ 66,70 PBS , ,40 K 100 AR0 FPA 1000 CSA 100 PBS ,70 10 ½ 9,10 PBS , ,80 K 110 AR0 FPA 1100 CSA 110 PBS 115 9,10 11 ½ 317,50 PBS , ,0 K 10 AR0 FPA 100 CSA 10 PBS , ,60 PBS , ,00 K 140 AR0 FPA 1400 CSA 140 PBS , ,40 PBS , ,80 K 160 AR0 FPA 1600 CSA 160 PBS , ,0 PBS , ,60 K 180 AR0 FPA 1800 CSA 180 PBS , ,00 PBS 00 Ê 50 Ê ,00 635,00 76, ,40 660,40 787,40 K 00 AR0 K 50 AR0 K 300 AR0 FPA 000 FPA 500 FPA 3000 CSA 00 CSA 50 CSA 300 Ê , ,00 Ê ) For this KMF-type series (Steps of 10) no types of other manufacturers o exist 34 Thin ring bearing PBS

35 eep groove ball bearing SLIM-SPLIT-BEARING Thin ring bearing PBC Thin ring bearing PBC 35

36 SLIM-SPLIT-BEARING eep groove ball bearing KUNSTSTOFF-METALL-FORMTEILE Fitte imensions 15 4,7 Shaft Ø h7 Bearing imensions 1,7 4,7 1,60 +0,05 1,75 +0,05 1,7 R max 0,6 (3 x ) R 1 4,7 4,7 Bore Ø H7 Table of imensions (Type series PBC) KMF-type 1) Bearing imension Basic loa ratings Mass Limiting Axial Raial spees yn. yn. C a C oa C r C or n G grease inch kg min -1 PBC , ,00 14, 16, 0, PBC ,95 4 ¼ 133,35 14,7 17,4 0, PBC ,30 4 ½ 139,70 15,1 18,7 0, PBC ,65 4 ¾ 146,05 15, 19,3 0, PBC , ,40 15,7 0,6 0, PBC ,70 5 ½ 165,10 16,1,5 0, PBC , ,80 16,9 4,9 0,48 00 PBC ,10 6 ½ 190,50 17,3 7,0 0, PBC , ,0 17,7 8,5 0, PBC ,50 7 ½ 15,90 18,3 31,0 0, PBC ,0 8 8,60 18,7 33,0 0, PBC ,90 8 ½ 41,30 19,0 35,0 0, PBC 090 8, ,00 19,6 37,5 0, PBC ,30 9 ½ 66,70 19,9 39,5 0, PBC , ,40 0, 41,5 0, PBC ,70 10 ½ 9,10 0,7 44,0 0, Thin ring bearing PBC

37 eep groove ball bearing SLIM-SPLIT-BEARING 4 KMF-type 1) Bearing imension Basic loa ratings Mass Limiting Axial Raial spees yn. yn. C a C oa C r C or n G grease inch kg min -1 PBC , ,80 1,0 45,5 0, PBC 115 9,10 11 ½ 317,50 1,3 47,5 0, PBC , ,0 1,7 50,0 0, PBC , ,60, 54,0 1, PBC , ,00,9 58,0 1, PBC , ,40 3,5 63,0 1, PBC , ,80 4,0 66,0 1,5 80 PBC , ,0 4,6 71,0 1, PBC , ,60 5,0 75,0 1, PBC , ,00 5,5 79,0 1, PBC , ,40 6,0 83,0 1, PBC , ,80 6,5 87,0 1, PBC 0 558,80 584,0 7,0 91,0 1, PBC , ,60 7,5 96,0 1, PBC , ,00 8,0 100,0 1, PBC , ,40 8,0 104,0 1, PBC , ,80 8,5 108,0 1, PBC , ,0 9,0 11,0, PBC , ,60 9,5 117,0, PBC , ,00 30,0 11,0, PBC , ,40 30,0 15,0, PBC , ,80 30,5 19,0, PBC 30 81, ,0 31,0 133,0, PBC , ,60 31,0 137,0, PBC , ,00 31,5 14,0, PBC , ,40 34, 167,0 3, PBC ,70 40 ½ 1054,10 34,4 169,0 3, PBC ,45 41 ¾ 1085,85 34,9 174,0 3, PBC , ,0 35,0 175,5 3, ) Other imensions on request Thin ring bearing PBC 37

38 SLIM-SPLIT-BEARING eep groove ball bearing KUNSTSTOFF-METALL-FORMTEILE Manufacturer comparative list Bearing imension KMF-type KAYON- FAG-type SKF-type INA-type Franke- inch type type PBC , ,00 K 040 CPO L10TA 400T FPC 400 CSC 040 PBC ,95 4 ¼ 133,35 K 04 CPO L10TA 404T FPC 404 CSC 04 PBC ,30 4 ½ 139,70 K 045 CPO L10TA 408T FPC 408 CSC 045 PBC ,65 4 ¾ 146,05 K 047 CPO L10TA 41T FPC 41 CSC 047 PBC , ,40 K 050 CPO L10TA 500T FPC 500 CSC 050 PBC ,70 5 ½ 165,10 K 055 CPO L10TA 508T FPC 508 CSC 055 PBC , ,80 K 060 CPO L10TA 600T FPC 600 CSC 060 PBC ,10 6 ½ 190,50 K 065 CPO L10TA 608T FPC 608 CSC 065 PBC , ,0 K 070 CPO L10TA 700T FPC 700 CSC 070 PBC ,50 7 ½ 15,90 K 075 CPO L10TA 708T FPC 708 CSC 075 PBC ,0 8 8,60 K 080 CPO L10TA 800T FPC 800 CSC 080 PBC ,90 8 ½ 41,30 PBC 090 8, ,00 K 090 CPO L10TA 900YH FPC 900 CSC 090 PBC ,30 9 ½ 66,70 PBC , ,40 K 100 CPO L10TA 1000YH FPC 1000 CSC 100 PBC ,70 10 ½ 9,10 PBC , ,80 K 110 CPO L10TA 1100YH FPC 1100 CSC 110 PBC 115 9,10 11 ½ 317,50 PBC , ,0 K 10 CPO L10TA 100YH FPC 100 CSC 10 PBC , ,60 PBC , ,00 K 140 CPO FPC 1400 CSC 140 PBC , ,40 PBC , ,80 K 160 CPO FPC 1600 CSC 160 PBC , ,0 PBC , ,60 K 180 CPO FPC 1800 CSC 180 PBC , ,00 PBC 00 Ê 50 Ê ,00 635,00 76, ,40 660,40 787,40 K 00 CPO K 50 CPO K 300 CPO FPC 000 FPC 500 FPC 3000 CSC 00 CSC 50 CSC 300 Ê , ,00 Ê ) For this KMF-type series (Steps of 10) no types of other manufacturers o exist 38 Thin ring bearing PBC

39 three point contact bearing SLIM-SPLIT-BEARING Thin ring bearing PBXC & PBCX Thin ring bearing PBXC & PBCX 39

40 SLIM-SPLIT-BEARING three point contact bearing KUNSTSTOFF-METALL-FORMTEILE Fitte imensions 15 4,7 Shaft Ø h7 1,60 +0,05 1,75 +0,05 R max 0,6 (3 x ) 4,7 Bore Ø H7 Table of imensions (Type series PBXC & PBCX) KMF-type 1) Bearing imension Basic loa ratings Mass Limiting Axial Raial spees yn. yn. C a C oa C r C or n G grease inch kg min -1 PBXC PBCX , ,00 14, 16, 0, PBXC PBCX ,95 4 ¼ 133,35 14,7 17,4 0, PBXC PBCX ,30 4 ½ 139,70 15,1 18,7 0, PBXC PBCX ,65 4 ¾ 146,05 15, 19,3 0, PBXC PBCX , ,40 15,7 0,6 0, PBXC PBCX ,70 5 ½ 165,10 16,1,5 0, PBXC PBCX , ,80 16,9 4,9 0,48 00 PBXC PBCX ,10 6 ½ 190,50 17,3 7,0 0, PBXC PBCX , ,0 17,7 8,5 0, PBXC PBCX ,50 7 ½ 15,90 18,3 31,0 0, PBXC PBCX ,0 8 8,60 18,7 33,0 0, PBXC PBCX ,90 8 ½ 41,30 19,0 35,0 0, PBXC PBCX 090 8, ,00 19,6 37,5 0, PBXC PBCX ,30 9 ½ 66,70 19,9 39,5 0, PBXC PBCX , ,40 0, 41,5 0, PBXC PBCX ,70 10 ½ 9,10 0,7 44,0 0, PBXC PBCX , ,80 1,0 45,5 0, Thin ring bearing PBXC & PBCX

41 three point contact bearing SLIM-SPLIT-BEARING Bearing imensions PBXC Bearing imensions PBCX 1,7 4,7 1,7 4,7 1,7 1,7 R 1 4,7 R 1 4,7 4 KMF-type 1) Bearing imension Basic loa ratings Mass Limiting Axial Raial spees yn. yn. C a C oa C r C or n G grease inch kg min -1 PBXC PBCX 115 9,10 11 ½ 317,50 1,3 47,5 0, PBXC PBCX , ,0 1,7 50,0 0, PBXC PBCX , ,60, 54,0 1, PBXC PBCX , ,00,9 58,0 1, PBXC PBCX , ,40 3,5 63,0 1, PBXC PBCX , ,80 4,0 66,0 1,5 80 PBXC PBCX , ,0 4,6 71,0 1, PBXC PBCX , ,60 5,0 75,0 1, PBXC PBCX , ,00 5,5 79,0 1, PBXC PBCX , ,40 6,0 83,0 1, PBXC PBCX , ,80 6,5 87,0 1, PBXC PBCX 0 558,80 584,0 7,0 91,0 1, PBXC PBCX , ,60 7,5 96,0 1, PBXC PBCX , ,00 8,0 100,0 1, PBXC PBCX , ,40 8,0 104,0 1, PBXC PBCX , ,80 8,5 108,0 1, PBXC PBCX , ,0 9,0 11,0, Thin ring bearing PBXC & PBCX 41

42 SLIM-SPLIT-BEARING three point contact bearing KUNSTSTOFF-METALL-FORMTEILE 4 KMF-type 1) Bearing imension Basic loa ratings Mass Limiting Axial Raial spees yn. yn. C a C oa C r C or n G grease inch kg min -1 PBXC PBCX , ,60 9,5 117,0, PBXC PBCX , ,00 30,0 11,0, PBXC PBCX , ,40 30,0 15,0, PBXC PBCX , ,80 30,5 19,0, PBXC PBCX 30 81, ,0 31,0 133,0, PBXC PBCX , ,60 31,0 137,0, PBXC PBCX , ,00 31,5 14,0, PBXC PBCX , ,40 34, 167,0 3, PBXC PBCX ,70 40 ½ 1054,10 34,4 169,0 3, PBXC PBCX ,45 41 ¾ 1085,85 34,9 174,0 3, PBXC PBCX , ,0 35,0 175,5 3, ) Other imensions on request 4 Thin ring bearing PBXC & PBCX

43 four point contact bearing SLIM-SPLIT-BEARING Whisper thin ring bearing PFXC Whisper thin ring bearing PFXC 43

44 SLIM-SPLIT-BEARING four point contact bearing KUNSTSTOFF-METALL-FORMTEILE Fitte imensions Bearing imensions h7 R 1,35 1, +0,05 1,4 +0,05 1,35 R max 1 5 H7 escription of shape The Whisper-Thin ring bearing consists of a thin ring bearing type series PBXC, which is covere on the outer an inner ring with an sheath with a harness of 70 Shore. Operating conitions The temperature limits of the stanar bearing in continuous operation are -40 C an +80 C. This Whisper-Thin ring bearing has more outstaning features. Features Low operating noise Low impact soun Insusceptible to shock Bearing clearance ajustable, ue to the splitte bearing rings an elastomer sheath Large installation tolerances on the connecting parts The raceway system is protecte from rough contamination ue to reuction of the bearing gap Table of imensions (Type series PFXC) KMF-type 1) Bearing- Fitte Basic loa ratings Mass Limiting imension imensions Axial Raial spees 1 yn. yn. C a C oa C r C or n G grease kg min -1 PFXC ,0 199,65 175,0 199,5 10,4 57,6 9,4 3,0 0,3 870 PFXC ,7 1,35 187,7 1, 10,5 61, 9,5 4,8 0, PFXC ,4 5,05 00,4 4,9 10,8 65,7 9,8 6,1 0, PFXC ,1 37,75 13,1 37,6 11,0 69,3 10,0 7,9 0, Whisper thin ring bearing PFXC

45 four point contact bearing SLIM-SPLIT-BEARING 4 KMF-type 1) Bearing- Fitte Basic loa ratings Mass Limiting imension imensions Axial Raial spees 1 yn. yn. C a C oa C r C or n G grease kg min -1 PFXC 090 5,8 50,45 5,8 50,3 11,3 73,8 10, 9,3 0, PFXC ,5 63,15 38,5 63,0 11,5 78,3 10,4 31,5 0, PFXC , 75,85 51, 75,7 11,7 81,9 10,6 3,9 0, PFXC ,9 88,55 63,9 88,4 1,0 86,4 10,8 34,7 0, PFXC ,6 301,5 76,6 301,1 1, 90,0 11,0 36,0 0, PFXC ,3 313,95 89,3 313,8 1,3 94,5 11, 37,8 0,5 530 PFXC 10 30,0 36,65 30,0 36,5 1,5 98,1 11,3 39, 0, PFXC ,4 35,05 37,4 351,9 1,9 106, 11,6 4,3 0, PFXC ,8 377,45 35,8 377,3 13, 114,3 1,0 45,9 0, PFXC , 40,85 378, 40,7 13,6 1,4 1, 48,6 0, PFXC ,6 48,5 403,6 48,1 13,9 130,5 1,5 5, 0,7 380 PFXC ,0 453,65 49,0 453,5 14,1 138,6 1,8 55,8 0, PFXC ,4 479,05 454,4 478,9 14,5 146,7 13,0 58,5 0, PFXC ,8 504,45 479,8 504,3 14,8 154,8 13,3 6,1 0,86 30 PFXC , 59,85 505, 59,7 15,0 16,9 13,6 64,8 0, PFXC ,6 555,5 530,6 555,1 15,3 171,0 13,9 68,4 0,95 90 PFXC 0 556,0 580,65 556,0 580,5 15,6 179,1 14,0 71,1 0,99 70 PFXC ,4 606,05 581,4 605,9 15,8 187, 14,3 74,7 1,04 60 PFXC ,8 631,45 606,8 631,3 16,1 195,3 14,5 78,3 1,08 50 PFXC 50 63, 656,85 63, 656,7 16,3 03,4 14,8 81,0 1,13 40 PFXC ,6 68,5 657,6 68,1 16,6 11,5 14,9 84,6 1,17 30 PFXC ,0 707,65 683,0 707,5 16,8 0,5 15, 88, 1, 0 PFXC ,4 733,05 708,4 73,9 17,0 9,5 15,4 90,9 1,6 0 PFXC ,8 758,45 733,8 758,3 17, 34,0 15,6 94,5 1,31 10 PFXC , 783,85 759, 783,7 17,4 43,0 15,8 97, 1,35 00 PFXC ,6 809,5 784,6 809,1 17,6 5,0 15,9 100,8 1, PFXC ,0 834,65 810,0 834,5 17,8 61,0 16,1 104,4 1, PFXC ,4 860,05 835,4 859,9 18,0 70,0 16,3 107,1 1, PFXC ,8 885,45 860,8 885,3 18,3 74,5 16,7 110,7 1, ) Other imensions on request Whisper thin ring bearing PFXC 45

46 four point contact bearing SLIM-SPLIT-BEARING Whisper thin ring bearing PFX 46 Whisper thin ring bearing PFX

47 four point contact bearing SLIM-SPLIT-BEARING escription of shape The Whisper-Thin ring bearing consists of a thin ring bearing type series PBX, which is covere on the outer an inner ring with an sheath with a harness of 70 Shore. Operating conitions The temperature limits of the stanar bearing in continuous operation are -40 C an +80 C. This Whisper-Thin ring bearing has more outstaning features. Features Low operating noise Low impact soun Insusceptible to shock Bearing clearance ajustable, ue to the splitte bearing rings an elastomer sheath Large installation tolerances on the connecting parts The raceway system is protecte from rough contamination ue to reuction of the bearing gap Whisper thin ring bearing PFX 47

48 SLIM-SPLIT-BEARING four point contact bearing KUNSTSTOFF-METALL-FORMTEILE Fitte imensions Bearing imensions 15 6,5 1 h7 R 16,1 15,9 16,1 +0,05 16,1 R max 1 6,5 H7 Table of imensions (Type series PFX) KMF-type 1) Bearing- Fitte Basic loa ratings Mass Limiting imension imensions Axial Raial spees 1 yn. yn. C a C oa C r C or n G grease kg min -1 PFX ,40 06,60 174,4 05,8 0,4 93,6 18,5 37,4 0, PFX ,10 19,30 187,1 18,5 1,0 100,8 19,1 40,5 0, PFX ,80 3,00 199,8 31, 1,4 107,1 19,4 4,8 0, PFX 085 1,50 44,70 1,5 43,9 1,8 113,4 19,8 45,0 0, PFX 090 5,0 57,40 5, 56,6,4 11,5 0,3 48,6 0, PFX ,90 70,10 37,9 69,3 3,0 16,9 0,6 51,3 0, PFX ,60 8,80 50,6 8,0 3,0 133, 1,0 53,1 0, PFX ,30 95,50 63,3 94,7 3,9 141,3 1,5 56,7 0, PFX 110 PFX ,00 88,70 308,0 30,90 76,0 88,7 307,4 30,1 3,9 4,3 146,7 153,0 1,8,1 58,5 61, 0,985 1, Whisper thin ring bearing PFX

49 four point contact bearing SLIM-SPLIT-BEARING 4 KMF-type 1) Bearing- Fitte Basic loa ratings Mass Limiting imension imensions Axial Raial spees 1 yn. yn. C a C oa C r C or n G grease kg min -1 PFX ,40 333,60 301,40 33,80 4,8 161,1,5 64,8 1, PFX ,80 359,00 36,80 358,0 5,7 17,8,7 69,3 1, PFX ,0 384,40 35,0 383,60 6,1 187, 3,9 74,7 1, PFX ,60 409,80 377,60 409,00 7,0 00,7 4,3 80,1 1, PFX ,00 435,0 403,00 434,40 7,5 13,3 4,3 85,5 1, PFX ,40 460,60 48,40 459,80 8,4 5,0 5,7 90,9 1,5 350 PFX ,80 486,00 453,80 485,0 8,8 43,0 6,1 96,3 1, PFX ,0 511,40 479,0 510,60 9,3 5,0 6,6 100,8 1,70 30 PFX ,60 536,80 504,60 536,00 9,7 65,5 7,0 107,1 1, PFX ,00 56,0 530,00 561,40 30, 79,0 7,5 111,6 1, PFX 0 555,40 587,60 555,40 586,80 31,1 9,5 7,9 117,0 1, PFX ,80 613,00 580,80 61,0 31,1 306,0 8,4 1,4, PFX ,0 638,40 606,0 637,60 3,0 319,5 8,8 17,8, PFX ,60 663,80 631,60 663,00 3,4 333,0 9,3 133,,39 40 PFX ,00 689,0 657,00 688,40 3,9 346,5 9,7 138,6,39 30 PFX 70 68,40 714,60 68,40 713,80 33,3 360,0 30, 143,1,418 0 PFX ,80 740,00 707,80 739,0 33,8 373,5 30,6 149,4, PFX ,0 765,40 733,0 764,60 34, 387,0 31,1 154,8, PFX ,60 790,80 758,60 790,00 34,7 400,5 31,1 159,3, PFX ,00 816,0 784,00 815,40 35,1 414,0 31,5 164,7, PFX ,40 841,60 809,40 840,80 35,6 47,5 3,0 171,0, PFX ,80 867,00 834,80 866,0 35,6 436,5 3,4 175,5, PFX ,0 89,40 860,0 891,60 36,0 450,0 3,9 180,9 3, PFX , ,80 101, ,00 39,0 59,5 35,7 13,4 3, PFX , ,50 105, ,70 39,3 536,0 35,9 16,0 3, PFX , ,5 1057, ,45 39,9 55,5 36,5,7 3, PFX , , , ,80 40,0 556,0 36,6 4,0 3, ) Other imensions on request Whisper thin ring bearing PFX 49

50 four point contact bearing SLIM-SPLIT-BEARING Sleeve whisper thin ring bearing HFX 50 Sleeve whisper thin ring bearing HFX

51 four point contact bearing SLIM-SPLIT-BEARING escription of shape A thorough going further evelopment of the KMF- Slim bearing PBXC le, via the whisper bearing PFXC, to the Sleeve-Whisper bearing HFX. The well-known C cross-section of 9,55 x 9,55 was enlarge by an elastomer housing an a sleeve to a bearing crosssection of 1,95 x 1,95. The thin-walle sleeve is mae of steel, the harness of the elastomer housing is 70 Shore. Operating conitions Operating temperature from 40 C to +80 C. Features Low operating noise Low impact soun Insusceptible to shock Bearing clearance ajustable, ue to the splitte bearing rings, sleeves an elastic sheath Large installation tolerances on the connecting parts The splitte bearing rings eliminates functional ifficulties resulting through ifferent material expansions, e. g. ifferent material combinations as light metal steel an cast iron Corrosion resistant Low maintenance High static an ynamic loa capacities High urability Low Mass The raceway system is protecte from rough contamination ue to reuction of the bearing gap Sleeve whisper thin ring bearing HFX 51

52 SLIM-SPLIT-BEARING four point contact bearing KUNSTSTOFF-METALL-FORMTEILE Fitte imensions Bearing imensions h7 1,95 1,8 +0, ,05 1,95 R max 1 R,3 5 H7 Table of imensions (Type series HFX) KMF-type 1) Bearing- Fitte Basic loa ratings Mass Limiting imension imensions Axial Raial spees 1 yn. yn. C a C oa C r C or n G grease kg min -1 HFX ,4 00,5 174,4 00,1 10,9 60,8 9,9 4, 0, HFX ,1 1,95 187,1 1,8 11,1 64,6 10,1 6,1 0,38 80 HFX ,8 5,65 199,8 5,5 11,4 69,4 10,4 7,6 0, HFX 085 1,5 38,35 1,5 38, 11,6 73, 10,6 9,5 0,43 70 HFX 090 5, 51,05 5, 49,9 11,9 77,9 10,7 30,9 0, HFX ,9 63,75 37,9 63,6 1, 8,7 11,0 33,3 0, HFX ,6 76,45 50,6 76,3 1,4 86,5 11, 34,7 0, HFX ,3 89,15 63,3 89,0 1,6 91, 11,4 36,6 0, HFX ,0 301,85 76,0 301,7 1,8 95,0 11,6 38,0 0, HFX ,7 314,55 88,7 314,4 13,0 99,8 11,8 39,9 0, HFX ,4 37,5 301,4 37,1 13, 103,6 1,0 41,3 0, HFX ,8 35,65 36,8 35,5 13,6 11,1 1,3 44,7 0, HFX , 378,05 35, 377,9 14,0 10,7 1,6 48,5 0, Sleeve whisper thin ring bearing HFX

53 four point contact bearing SLIM-SPLIT-BEARING 4 KMF-type 1) Bearing- Fitte Basic loa ratings Mass Limiting imension imensions Axial Raial spees 1 yn. yn. C a C oa C r C or n G grease kg min -1 HFX ,6 403,45 377,6 403,3 14,3 19, 1,9 51,3 0, HFX ,0 48,85 403,0 48,7 14,6 137,8 13, 55,1 0, HFX ,4 454,5 48,4 454,1 14,9 146,3 13,5 58,9 0, HFX ,8 479,65 453,8 479,5 15,3 154,9 13,8 61,8 0, HFX , 505,05 479, 504,9 15,6 163,4 14,1 65,6 0,95 30 HFX ,6 530,45 504,6 530,3 15,9 17,0 14,3 68,4 1, HFX ,0 555,85 530,0 555,7 16, 180,5 14,6 7, 1,05 90 HFX 0 555,4 581,5 555,4 581,1 16,4 189,1 14,8 75,1 1,10 70 HFX ,8 606,65 580,8 606,5 16,7 197,6 15,1 78,9 1,15 60 HFX , 63,05 606, 631,9 17,0 06, 15,3 8,7 1,0 50 HFX ,6 657,45 631,6 657,3 17, 14,7 14,6 85,5 1,5 40 HFX ,0 68,85 657,0 68,7 17,5 3,3 15,8 89,3 1,30 30 HFX ,6 784,45 758,6 784,3 18,3 56,5 16,6 10,6 1, ) Other imensions on request Sleeve whisper thin ring bearing HFX 53

54 SLIM-SPLIT-BEARING Example of calculations for combine static strength an nominal service life 54 Example of calculations for combine static strength an nominal service life

55 SLIM-SPLIT-BEARING Characteristics of the limiting spees n (revolutions per minute in min -1 ) (Inner iameter in ) Example of calculations for combine static strength an nominal service life 55

56 SLIM-SPLIT-BEARING KUNSTSTOFF-METALL-FORMTEILE Calculation of Static Strength Given: PBXC 115 Static Basic loa ratings C oa = 114,6 Wante: Static Safety Factor Bearing Loas: Axial Loa Raial Loa Tilting Torque F oa = 7,5 F or = 6,0 M ok = 1,7 m ε = Loa eccentricity value L = Pitch circle iameter Ø in = + 10 ε = M ok 10³ F oa L F or F oa,0 5, ε = 1,7 7,5 301,6 10³ = 1,5 1,6 1, K of 4 3 F or = 6 F oa 7,5 = 0,8 K of = 5,6 0,8 0,4 P o = F oa K of = 7,5 5,6 = 4 1,5 ε 1,5 Static Safety Factor S 0 = C oa P Static Loa Factor K of for four point thin ring bearing S 0 = 114,6 =, Example of calculations for combine static strength an nominal service life

57 SLIM-SPLIT-BEARING Calculation of Service Life Given: PBXC 115 ynamic Basic loa ratings C a = 0 Wante: Nominal Service Life Bearing Loas: Axial Loa Raial Loa Tilting Torque F a =,50 F r = 1,00 M k = 0,38 m Spee n = 0 min -1 0 ε = Loa eccentricity value 15 L = Pitch circle iameter Ø in = ε = M k 10 ³ F a L F r F a ε = 0,38,5 301,6 10 ³ = 1,0,0 1,6 1, 0,8 K F,3 4 3 F r = 1,0 = 0,4 F a,5 P = F a K F =,5,3 = 5,75 K F =,3 0, ,0 4 ε Service Life L h = n L h = ,75 C a P 3 3 = h ynamic Loa Factor K F for four point thin ring bearing Example of calculations for combine static strength an nominal service life 57

58 AXIAL-SLIM-SPLIT-BEARING Axial-Ball thrust bearing PBAU 4,5 x 4,5 Axial-Ball thrust bearing PBA 1,7 x 1,7 Axial-Ball thrust bearing PBAA 6,35 x 6,35 Axial-Whisper-ball thrust bearing PFAC 1,35 x 1,35 Axial-Ball thrust bearing PBAC 9,55 x 9,55 Axial-Whisper-ball thrust bearing PFA 16,1 x 16,1 Ball thrust bearing Whisper ball thrust bearing PBAU PBAA PBAC PBA PFAC 58

59 AXIAL-SLIM-SPLIT-BEARING Technical escription escription of shape The KMF-Ball thrust bearing AXIAL-SLIM-SPLIT- BEARING uses a four point geometry. ue to these four contact points (presure angle 90 ) this axial thrust ball bearing has an extremely high axial Basic loa ratings in relation to the small bearing cross-cut. Axial thrust ball bearings are mostly so calle vertical bearings (turning axes vertical) an can not transmit any raial loas. These bearings are no self holing units. The assembly of the bearing parts (bearing rings, balls an cage) can be one separately an is for bigger iameters more easy. Materials The ball thrust bearings of the type series PBAU, PBAA, PBAC an PBA are corrosion resistant. Axial bearing rings are mae of stainless steel X46Cr13 (material coe ). The cage is mae of plastic. Operating conitions The temperature limits of the stanar bearing in continuous operation are -40 C an +100 C, temporary up to +10 C. Bearing Cross-Cuts The KMF-AXIAL-SLIM-SPLIT-BEARING can be offere in the following cross-cuts: iameter KMF-type Abburation imensions U 4,5 x 4,5 PBAU A 6,35 x 6,35 PBAA C 9,55 x 9,55 PBAC 1,7 x 1,7 PBA KMF can supply all bearing types of the complete iameter range of each type series within short terms. Also all other imensions beneath the preferre series can be suplie within short terms as well. Features Free choice of material of the connecting parts, e. g. aluminium The splitte bearing rings eliminate functional ifficulties resulting through ifferent material expansions, e. g. ifferent material combinations as light metal steel an cast iron Corrosion resistant an low maintenance High static an ynamic Basic loa ratings High urability High rigiity Low Mass Easy to install an economical mounting an ismounting, as special fixtures are not necessary imensions beneath preferre series can be supplie within short terms Technical escription 59

60 four point contact bearing AXIAL-SLIM-SPLIT-BEARING Axial-Ball thrust bearing PBAU 60 Axial-Ball thrust bearing PBAU

61 four point contact bearing AXIAL-SLIM-SPLIT-BEARING Fitte imensions Bearing imensions 4,6 ±0,05 Shaft Ø h7 1,75-0,1 4,5-0,15 4,5 4,5,4-0,1 R max 0,3 (4 x ) R 0,5 Table of imensions (Type series PBAU) KMF-type 1) Bearing imension Basic loa ratings Mass Limiting Axial spees yn. C a C oa n G grease kg min -1 PBAU ,80 33,4 0, PBAU ,85 35,4 0, PBAU ,00 37,4 0, PBAU ,0 40,8 0, PBAU ,30 44,8 0, PBAU ,50 48, 0, PBAU ,70 5,0 0, PBAU ,90 56,0 0, PBAU ,10 60,0 0, PBAU ,0 63,0 0, PBAU ,40 67,0 0, PBAU ,60 70,0 0, PBAU ,60 74,0 0, PBAU ,80 78,0 0, PBAU ,90 81,0 0, PBAU ,00 85,0 0, PBAU ,10 89,0 0, PBAU ,30 93,0 0, Axial-Ball thrust bearing PBAU 61

62 AXIAL-SLIM-SPLIT-BEARING four point contact bearing KUNSTSTOFF-METALL-FORMTEILE 4 KMF-type 1) Bearing imension Basic loa ratings Mass Limiting Axial spees yn. C a C oa n G grease kg min -1 PBAU ,45 96,0 0, PBAU ,60 100,0 0, PBAU ,60 104,0 0, PBAU ,80 108,0 0, PBAU ,00 110,0 0, PBAU ,00 114,0 0, PBAU ,10 118,0 0, PBAU ,30 1,0 0, PBAU ,30 16,0 0, PBAU ,40 130,0 0, PBAU ,40 134,0 0, PBAU ,60 136,0 0, PBAU ,75 140,0 0, PBAU ,75 144,0 0, PBAU ,90 148,0 0, PBAU ,90 15,0 0, PBAU ,10 156,0 0, PBAU ,10 160,0 0, PBAU ,0 16,0 0, PBAU ,0 166,0 0, Axial-Ball thrust bearing PBAU

63 four point contact bearing AXIAL-SLIM-SPLIT-BEARING 4 KMF-type 1) Bearing imension Basic loa ratings Mass Limiting Axial spees yn. C a C oa n G grease kg min -1 PBAU ,40 170,0 0, PBAU ,40 174,0 0, PBAU ,60 178,0 0, PBAU ,60 180,0 0, PBAU ,70 184,0 0, PBAU ,70 188,0 0, PBAU ,90 19,0 0,05 90 PBAU ,90 196,0 0,09 90 PBAU ,05 00,0 0,13 80 PBAU ,05 04,0 0,17 80 PBAU ,0 06,0 0,1 70 PBAU ,0 10,0 0,5 70 PBAU ,0 14,0 0,9 60 PBAU ,40 18,0 0,33 60 PBAU ,40,0 0,37 50 PBAU ,50 6,0 0,41 50 PBAU ,50 30,0 0,45 50 PBAU ,70 3,0 0,49 40 PBAU ,70 36,0 0, ) Other imensions on request Axial-Ball thrust bearing PBAU 63

64 four point contact bearing AXIAL-SLIM-SPLIT-BEARING Axial-Ball thrust bearing PBAA 64 Axial-Ball thrust bearing PBAA

65 four point contact bearing AXIAL-SLIM-SPLIT-BEARING Fitte imensions Bearing imensions 6,45 ±0,05 Shaft Ø h7,35-0,1 6,35-0,1 6,35 6,35 3,5-0,1 R max 0,3 (4 x ) R 0,4 Table of imensions (Type series PBAA) KMF-type 1) Bearing imension Basic loa ratings Mass Limiting Axial spees yn. C a C oa n G grease inch kg min -1 PBAA , ,30 7,9 43,8 0, PBAA ,95 4 ¼ 10,65 8,0 46, 0, PBAA ,30 4 ½ 17,00 8,3 49, 0, PBAA ,65 4 ¾ 133,35 8,3 5,0 0, PBAA , ,70 8,6 55,0 0, PBAA ,70 5 ½ 15,40 8,9 60,0 0, PBAA , ,10 9,1 65,0 0, PBAA ,10 6 ½ 177,80 9,4 70,0 0,13 90 PBAA , ,50 9,6 76,0 0, PBAA ,50 7 ½ 03,0 9,9 81,0 0, PBAA ,0 8 15,90 10,1 87,0 0, PBAA ,90 8 ½ 8,60 10,4 9,0 0, PBAA 090 8, ,30 10,6 98,0 0, PBAA ,30 9 ½ 54,00 10,7 104,0 0, PBAA , ,70 11,1 108,0 0,0 600 PBAA ,70 10 ½ 79,40 11, 114,0 0, Axial-Ball thrust bearing PBAA 65

66 AXIAL-SLIM-SPLIT-BEARING four point contact bearing KUNSTSTOFF-METALL-FORMTEILE 4 KMF-type 1) Bearing imension Basic loa ratings Mass Limiting Axial spees yn. C a C oa n G grease inch kg min -1 PBAA , ,10 11,4 118,0 0, 550 PBAA 115 9,10 11 ½ 304,80 11,5 14,0 0,3 50 PBAA , ,50 11,7 130,0 0,4 500 PBAA ,50 1 ½ 330,0 11,7 13,0 0,5 480 PBAA , ,90 1,0 140,0 0,6 460 PBAA ,90 13 ½ 355,60 1, 146,0 0,7 450 PBAA , ,30 1,4 15,0 0,8 430 PBAA ,30 14 ½ 381,00 1,5 158,0 0,9 410 PBAA , ,70 1,7 16,0 0, PBAA ,70 15 ½ 406,40 1,8 168,0 0, PBAA , ,10 13,0 17,0 0,3 380 PBAA ,10 16 ½ 431,80 13, 178,0 0, PBAA , ,50 13,3 184,0 0, PBAA ,50 17 ½ 457,0 13,5 190,0 0, PBAA , ,90 13,7 194,0 0, PBAA ,90 18 ½ 48,60 13,7 00,0 0,37 30 PBAA , ,30 13,8 06,0 0,38 30 PBAA ,30 19 ½ 508,00 14,0 10,0 0, PBAA , ,70 14,1 16,0 0, PBAA , ,10 14,3 6,0 0,41 90 PBAA 0 558,80 571,50 14,6 38,0 0,43 70 PBAA , ,90 14,8 48,0 0,45 60 PBAA ,60 4 6,30 15,1 60,0 0,47 50 PBAA , ,70 15,3 70,0 0,49 40 PBAA , ,10 15,4 80,0 0,51 30 PBAA , ,50 15,8 9,0 0,53 0 PBAA ,0 8 73,90 15,9 30,0 0,55 10 PBAA , ,30 16,1 31,0 0,57 10 PBAA , ,70 16,4 34,0 0, ) Other imensions on request 66 Axial-Ball thrust bearing PBAA

67 four point contact bearing AXIAL-SLIM-SPLIT-BEARING Axial-Ball thrust bearing PBAC Axial-Ball thrust bearing PBAC 67

68 AXIAL-SLIM-SPLIT-BEARING four point contact bearing KUNSTSTOFF-METALL-FORMTEILE Fitte imensions Bearing imensions 9,7 ±0,1 Shaft Ø h7 9,55-0,15 3,5-0,1 9,55 5,0-0,1 9,55 R max 0,3 (4 x ) R 0,6 Table of imensions (Type series PBAC) KMF-type 1) Bearing imension Basic loa ratings Mass Limiting Axial spees yn. C a C oa n G grease inch kg min -1 PBAC , ,85 18,7 18,0 0, PBAC ,50 7 ½ 09,55 19,0 136,0 0,3 800 PBAC ,0 8,5 19,5 146,0 0, PBAC ,90 8 ½ 34,95 19,8 154,0 0, PBAC 090 8, ,65 0,3 164,0 0, PBAC ,30 9 ½ 60,35 0,8 174,0 0, PBAC , ,05 1,1 18,0 0, PBAC ,70 10 ½ 85,75 1,6 19,0 0, PBAC , ,45 1,9 00,0 0, PBAC 115 9,10 11 ½ 311,15,3 10,0 0,47 50 PBAC , ,85,6 18,0 0, PBAC , ,5 3, 36,0 0, PBAC , ,65 3,9 54,0 0, PBAC , ,05 4,5 7,0 0, PBAC , ,45 5,0 90,0 0, PBAC , ,85 5,5 308,0 0, PBAC , ,5 6, 36,0 0,7 330 PBAC , ,65 6,7 344,0 0, Axial-Ball thrust bearing PBAC

69 four point contact bearing AXIAL-SLIM-SPLIT-BEARING 4 KMF-type 1) Bearing imension Basic loa ratings Mass Limiting Axial spees yn. C a C oa n G grease inch kg min -1 PBAC , ,05 7,1 36,0 0, PBAC , ,45 7,6 380,0 0,83 90 PBAC 0 558,80 577,85 8,1 398,0 0,87 70 PBAC , ,5 8,6 416,0 0,91 60 PBAC , ,65 9,1 434,0 0,95 50 PBAC , ,05 9,4 45,0 0,98 40 PBAC , ,45 9,9 470,0 1,0 30 PBAC , ,85 30,4 490,0 1,06 0 PBAC , ,5 30,7 510,0 1,10 10 PBAC , ,65 31,0 50,0 1,14 10 PBAC , ,05 31,4 540,0 1,18 00 PBAC , ,45 31,9 560,0 1, 190 PBAC 30 81, ,85 3, 580,0 1,6 190 PBAC , ,5 3,5 600,0 1, PBAC , ,65 33,0 610,0 1, ) Other imensions on request Component parts PBAC 1 Bearing top ring Conforme raceway Bearing uner ring Conforme raceway 3 Cage strip with balls Balls hole an guie 1 3 Optional 4 Cage segments with balls Balls hole an guie 4 Axial-Ball thrust bearing PBAC 69

70 AXIAL-SLIM-SPLIT-BEARING four point contact bearing KUNSTSTOFF-METALL-FORMTEILE Axial-Ball thrust bearing PBAC metric Fitte imensions Bearing imensions 9,7 ±0,1 Shaft Ø h7 9,55-0,15 3,5-0,1 9,55 9,55 5,0-0,1 R max 0,3 (4 x ) R 0,6 Table of imensions (Type series PBAC metric) KMF-type 1) Bearing imension Basic loa ratings Mass Limiting Axial spees L ) yn. C a C oa n G grease kg min -1 PBAC ,5 04,5 18,8 131,7 0,30 80 PBAC ,5 69,5 1,8 177,8 0, PBAC ,5 304,5 3,3 0,7 0, PBAC ,5 404,5 7,0 73,9 0,6 400 PBAC ,5 59,5 31, 36,4 0,8 300 PBAC ,5 699,5 36,0 483,1 1,10 0 PBAC ,5 79,5 36,8 504,4 1,15 10 PBAC ,5 731,5 36,9 505,8 1,16 10 PBAC ,5 884,5 40,6 614,5 1, PBAC ,5 889,5 40,7 618,0 1, PBAC ,5 1099,5 45,4 767,0 1, PBAC ,5 139,5 48, 866,0 1, PBAC ,5 1419,5 51,6 994,0, ) Other imensions on request ) Running circle iameter 70 Axial-Ball thrust bearing PBAC metric

71 four point contact bearing AXIAL-SLIM-SPLIT-BEARING Axial-Ball thrust bearing PBA Axial-Ball thrust bearing PBA 71

72 AXIAL-SLIM-SPLIT-BEARING four point contact bearing KUNSTSTOFF-METALL-FORMTEILE Fitte imensions Bearing imensions 1,9 ±0,1 Shaft Ø h7 1,7-0,15 4,5-0,1 1,7 1,7 7,0-0,1 R max 0,6 (4 x ) R 1 Table of imensions (Type series PBA) KMF-type 1) Bearing imension Basic loa ratings Mass Limiting Axial spees yn. C a C oa n G grease inch kg min -1 PBA , , 36,7 08,0 0, PBA ,50 7 ½ 15,9 37,9 4,0 0, PBA ,0 8 8,6 38,7 38,0 0, PBA ,90 8 ½ 41,3 39,3 5,0 0, PBA 090 8, ,0 40,5 70,0 0, PBA ,30 9 ½ 66,7 41,4 8,0 0, PBA , ,4 41,4 96,0 0, PBA ,70 10 ½ 9,1 43,1 314,0 0, PBA , ,8 43,1 36,0 0, PBA 115 9,10 11 ½ 317,5 43,9 340,0 0, PBA , , 44,7 358,0 0, PBA , ,6 46,3 384,0 1, Axial-Ball thrust bearing PBA

73 four point contact bearing AXIAL-SLIM-SPLIT-BEARING 4 KMF-type 1) Bearing imension Basic loa ratings Mass Limiting Axial spees yn. C a C oa n G grease inch kg min -1 PBA , ,00 47,1 416,0 1, PBA , ,40 48,8 446,0 1, PBA , ,80 49,6 474,0 1,5 380 PBA , ,0 51, 500,0 1, PBA , ,60 5,0 540,0 1, PBA , ,00 5,8 560,0 1, PBA , ,40 53,6 590,0 1, PBA , ,80 54,4 60,0 1, PBA 0 558,80 584,0 56,1 650,0 1, PBA , ,60 56,1 680,0 1, PBA , ,00 57,7 710,0 1, PBA , ,40 58,5 740,0 1,89 40 PBA , ,80 59,3 770,0 1, PBA , ,0 60,1 800,0,041 0 PBA , ,60 60,9 830,0, PBA , ,00 61,8 860,0, PBA , ,40 6,6 890,0,64 00 PBA , ,80 63,4 90,0, PBA 30 81, ,0 64, 950,0, PBA , ,60 64, 970,0, PBA , ,00 65,0 1000,0, PBA , ,40 70,5 1175,0 3, PBA ,70 40 ½ 1054,10 71,0 1190,0 3, PBA ,45 41 ¾ 1085,85 7,0 130,0 3, PBA , ,0 7, 135,0 3, ) Other imensions on request Axial-Ball thrust bearing PBA 73

74 four point contact bearing AXIAL-SLIM-SPLIT-BEARING Axial-Whisper-ball thrust bearing PFAC 74 Axial-Whisper-ball thrust bearing PFAC

75 four point contact bearing AXIAL-SLIM-SPLIT-BEARING escription of shape The Whisper-Thin ring bearing consists of a thin ring bearing type series PBAC, which is covere on the top an uner ring with an elastomer sheath with a harness of 70 Shore. Operating conitions The temperature limits of the stanar bearing in continuous operation are -40 C an +80 C. This whisper thin ring bearing has aitionally to the PBAC more outstaning features. Features Low operating noise Low impact soun Insusceptible to shock Large installation tolerances on the connecting parts The raceway system is protecte from rough contamination ue to reuction of the bearing gap Axial-Whisper-ball thrust bearing PFAC 75

76 AXIAL-SLIM-SPLIT-BEARING four point contact bearing KUNSTSTOFF-METALL-FORMTEILE Fitte imensions H7 ±0,1 Bearing imensions 1 h7 1,35 4,5-0,1 1,35 1,35 6,0-0,1 R max 1 R Table of imensions (Type series PFAC) KMF-type 1) Bearing- Fitte Basic loa ratings Mass Limiting spees imension imensions Axial 1 yn. C a C oa n G grease kg min -1 PFAC ,0 199,65 175,0 00,0 16,8 115, 0,3 870 PFAC ,7 1,35 187,7 1,7 17,1 1,4 0, PFAC ,4 5,05 00,4 5,4 17,6 131,4 0, PFAC ,1 37,75 13,1 38,1 17,8 138,6 0,38 70 PFAC 090 5,8 50,45 5,8 50,8 18,3 147,6 0, PFAC ,5 63,15 38,5 63,5 18,7 156,6 0, PFAC , 75,85 51, 76, 19,0 163,8 0, PFAC ,9 88,55 63,9 88,9 19,4 17,8 0, PFAC ,6 301,5 76,6 301,6 19,7 180,0 0, Axial-Whisper-ball thrust bearing PFAC

77 four point contact bearing AXIAL-SLIM-SPLIT-BEARING 4 KMF-type 1) Bearing- Fitte Basic loa ratings Mass Limiting spees imension imensions Axial 1 yn. C a C oa n G grease kg min -1 PFAC ,3 313,95 89,3 314,3 0,0 189,0 0,5 530 PFAC 10 30,0 36,65 30,0 37,0 0,3 196, 0, PFAC ,4 35,05 37,4 35,4 0,9 1,4 0, PFAC ,8 377,45 35,8 377,8 1,5 8,6 0, PFAC , 40,85 378, 403,,1 44,8 0, PFAC ,6 48,5 403,6 48,6,5 61,0 0,7 380 PFAC ,0 453,65 49,0 454,0 3,0 77, 0, PFAC ,4 479,05 454,4 479,4 3,6 93,4 0, PFAC ,8 504,45 479,8 504,8 4,0 309,6 0,86 30 PFAC , 59,85 505, 530, 4,1 35,8 0, PFAC ,6 555,5 530,6 555,6 4,8 34,0 0,95 90 PFAC 0 556,0 580,65 556,0 581,0 5,3 358, 0,99 70 PFAC ,4 606,05 581,4 606,4 5,7 374,4 1,04 60 PFAC ,8 631,45 606,8 631,8 6, 390,6 1,08 50 PFAC 50 63, 656,85 63, 657, 6,5 406,8 1,13 40 PFAC ,6 68,5 657,6 68,6 6,9 43,0 1,17 30 PFAC ,0 707,65 683,0 708,0 7,4 441,0 1, 0 PFAC ,4 733,05 708,4 733,4 7,6 459,0 1,6 0 PFAC ,8 758,45 733,8 758,8 7,9 468,0 1,31 10 PFAC , 783,85 759, 784, 8,3 486,0 1,35 00 PFAC ,6 809,5 784,6 809,6 8,7 504,0 1, PFAC ,0 834,65 810,0 835,0 9,0 5,0 1, PFAC ,4 860,05 835,4 860,4 9,3 540,0 1, PFAC ,8 885,45 860,8 885,8 9,7 549,0 1, ) Other imensions on request Axial-Whisper-ball thrust bearing PFAC 77

78 four point contact bearing AXIAL-SLIM-SPLIT-BEARING Axial-Whisper-ball thrust bearing PFA 78 Axial-Whisper-ball thrust bearing PFA

79 four point contact bearing AXIAL-SLIM-SPLIT-BEARING escription of shape The Whisper-Thin ring bearing consists of a thin ring bearing type series PBA, which is covere on the top an uner ring with an elastomer sheath with a harness of 70 Shore. Operating conitions The temperature limits of the stanar bearing in continuous operation are -40 C an +80 C. This whisper thin ring bearing has aitionally to the PBA more outstaning features. Features Low operating noise Low impact soun Insusceptible to shock Large installation tolerances on the connecting parts The raceway system is protecte from rough contamination ue to reuction of the bearing gap Axial-Whisper-ball thrust bearing PFA 79

80 AXIAL-SLIM-SPLIT-BEARING four point contact bearing KUNSTSTOFF-METALL-FORMTEILE Fitte imensions ±0,1 Bearing imensions 1 h7 16,1 6-0,1 16,1 16,1 7,5-0,1 R max 1 R Table of imensions (Type series PFA) KMF-type 1) Bearing- Fitte Basic loa ratings Mass Limiting spees imension imensions Axial 1 yn. C a C oa n G grease kg min -1 PFA ,4 06,6 174,4 07,0 33,0 187, 0, PFA ,1 19,3 187,1 19,7 34,1 01,6 0, PFA ,8 3,0 199,8 3,4 34,8 14, 0, PFA 085 1,5 44,7 1,5 45,1 35,4 6,8 0, PFA 090 5, 57,4 5, 57,8 36,5 43,0 0, PFA ,9 70,1 37,9 70,5 37,3 53,8 0, PFA ,6 8,8 50,6 83, 37,3 66,4 0, PFA ,3 95,5 63,3 95,9 38,8 8,6 0, PFA 110 PFA ,0 88,7 308, 30,9 76,0 88,7 308,6 31,3 38,8 39,5 93,4 306,0 0,985 1, PFA ,4 333,6 301,4 334,0 40, 3, 1, Axial-Whisper-ball thrust bearing PFA

81 four point contact bearing AXIAL-SLIM-SPLIT-BEARING 4 KMF-type 1) Bearing- Fitte Basic loa ratings Mass Limiting spees imension imensions Axial 1 yn. C a C oa n G grease kg min -1 PFA ,80 359,00 36,80 359,40 41,7 345,6 1, PFA ,0 384,40 35,0 384,80 4,4 374,4 1, PFA ,60 409,80 377,60 410,0 43,9 401,4 1, PFA ,00 435,0 403,00 435,60 44,6 46,6 1, PFA ,40 460,60 48,40 461,00 46,1 450,0 1,5 350 PFA ,80 486,00 453,80 486,40 46,8 486,0 1, PFA ,0 511,40 479,0 511,80 47,5 504,0 1,70 30 PFA ,60 536,80 504,60 537,0 48, 531,0 1, PFA ,00 56,0 530,00 56,60 49,0 558,0 1, PFA 0 555,40 587,60 555,40 588,00 50,5 585,0 1, PFA ,80 613,00 580,80 613,40 50,5 61,0, PFA ,0 638,40 606,0 638,80 51,9 639,0, PFA ,60 663,80 631,60 664,0 5,7 666,0,39 40 PFA ,00 689,0 657,00 689,60 53,4 693,0,39 30 PFA 70 68,40 714,60 68,40 715,00 54,1 70,0,418 0 PFA ,80 740,00 707,80 740,40 54,8 747,0, PFA ,0 765,40 733,0 765,80 55,6 774,0, PFA ,60 790,80 758,60 791,0 56,3 801,0, PFA ,00 816,0 784,00 817,60 57,1 88,0, PFA ,40 841,60 809,40 84,00 57,8 855,0, PFA ,80 867,00 834,80 867,40 57,8 873,0, PFA ,0 89,40 860,0 89,80 58,5 900,0 3, PFA , ,80 101, ,0 63,5 1060,0 3, PFA , ,50 105, ,90 63,9 1070,0 3, PFA , ,5 1057, ,65 64,8 1100,0 3, PFA , , , ,00 65,0 1110,0 3, ) Other imensions on request Axial-Whisper-ball thrust bearing PFA 81

82 CROSSE-ROLLER-SLIM-SPLIT-BEARING Crosse roller bearing PSX-08 8 x 8 Angular roller bearing PSR-08 8 x 8 Axial-angular roller bearing PSA-08 8 x 8 Crosse roller bearing PSX-08 PSA-08, PSR-08, PSX-08 8

83 CROSSE-ROLLER-SLIM-SPLIT-BEARING Crosse roller bearing PSX-08 Crosse roller bearing PSX-08 83

84 CROSSE-ROLLER-SLIM-SPLIT-BEARING KUNSTSTOFF-METALL-FORMTEILE escription of shape Crosse roller bearings are single row cylinrical roller bearings an can take raial loas, ouble sie acting axial loas as well as moment loas. The raceway system consists of cyliner rollers, which are alternately arrange by 90. The KMF-CROSSE-ROLLER-SLIM-SPLIT-BEARING uses splitte bearing rings as the KMF-SLIM-SPLIT-BEAR- ING, so that the biggest possible cylinrical rollers coul be integrate in this special bearing shape with the smallest bearing cross-cut. A crosse roller cage with hole an guie rollers causes less friction in the raceway system an enables therefore higher spees. Furthermore the special shape of the cage guarantees a labyrinth sealing of the bearing gap, an therefor protects the raceway system, similar to a sealing system, of leaving the bearing grease an the entry of rough contamination. The KMF-CROSSE-ROLLER-SLIM-SPLIT-BEARING is offere with a bearing cross-cut of 8,0 x 8,0, name PSX series. ue to this small bearing cross-cut the connecting parts can be esigne very simple. So, the KMF-Crosse roller bearing offers many avantages regaring esign an function. Because of the maximum possible amount of rollers, the integration of the cage the given line contact between the rollers an the raceway, the elastic eformation of crosse roller bearings is small. So this bearings have an extremely high stiffness, especially in axial irection, which can be increase by setting the preloa higher. So, the function can be fitte to the requirements of each application iniviually. KMF can supply all bearing types of the complete iameter range of each type series within short terms. Also all other imensions beneath the preferre series can be suplie within short terms as well. 84 Crosse roller bearing PSX-08

85 CROSSE-ROLLER-SLIM-SPLIT-BEARING Materials The bearings are mae of stainless steel X46Cr13 (material coe ). The seperator is mae of Polyamie 1. Operating conitions The temperature limits of the stanar bearing in continuous operation are -40 C an +100 C, for short perios up to +10 C. Features Consierably simplification of constructions with crosse roller bearings an their connecting parts (economic construction of the connecting parts) Free choice of material for the connecting parts, e. g. aluminium Corrosion resistant an low maintenance High static an ynamic Basic loa ratings at maximal stiffnes (low eformation) Low Mass Easy to install imensions beneath preferre series can be supplie within short terms Crosse roller bearing PSX-08 85

86 CROSSE-ROLLER-SLIM-SPLIT-BEARING KUNSTSTOFF-METALL-FORMTEILE Fitte imensions 15,8 Shaft Ø h7 Bearing imensions s 7,9 +0,05 8,05 +0,05 8 R max 0,3 (3 x ) R 0,5 S,8 Bore Ø H7 Table of imensions (Type series PSX-08) KMF-Type 1) Bearing imension Mass Basic loa ratings Limiting spees Axial Raial Bearing Pre- s S yn. yn. play loa C a C oa Cr ) C or ) n G fett n G grease kg min -1 min -1 PSX ,6 90,4 0,11 6,00 30,0 4,3 1, PSX ,6 100,4 0,1 6,40 33,0 4,5 13, PSX ,6 110,4 0,13 6,90 38,0 4,9 15, PSX ,6 10,4 0,14 7,0 41,0 5,1 16, PSX ,6 130,4 0,16 7,60 45,5 5,4 18, PSX ,6 140,4 0,17 7,90 48,5 5,6 19, PSX ,6 150,4 0,18 8,10 5,0 5,8 0, PSX ,6 160,4 0,0 8,50 56,0 6,1, PSX ,6 170,4 0,1 8,70 60,0 6, 3, PSX ,6 180,4 0, 9,00 63,0 6,4 5, PSX ,6 190,4 0,3 9,30 67,0 6,6 7, PSX ,6 00,4 0,5 9,50 70,0 6,8 8, PSX ,6 10,4 0,6 9,70 74,0 6,8 9, PSX ,6 0,4 0,7 10,10 78,0 7, 31, PSX ,6 30,4 0,9 10,30 81,0 7,3 3, PSX ,6 40,4 0,30 10,50 84,0 7,4 34, Crosse roller bearing PSX-08

87 CROSSE-ROLLER-SLIM-SPLIT-BEARING 4 KMF-Type 1) Bearing imension Mass Basic loa ratings Limiting spees Axial Raial Bearing Pre- s S yn. yn. play loa C a C oa Cr ) C or ) n G fett n G grease kg min -1 min -1 PSX ,6 50,4 0,31 10,80 89,0 7,7 35, PSX ,6 60,4 0,33 11,00 9,0 7,8 37, PSX ,6 70,4 0,35 11,0 95,0 7,9 38, PSX ,6 80,4 0,37 11,50 100,0 8,1 40, PSX ,6 90,4 0,39 11,60 103,0 8,3 41, PSX ,6 300,4 0,41 11,80 106,0 8,4 4, PSX ,6 310,4 0,43 1,10 111,0 8,6 44, PSX ,6 30,4 0,45 1,30 114,0 8,7 45, PSX ,6 330,4 0,47 1,40 117,0 8,8 47, PSX ,6 340,4 0,49 1,70 1,0 9,0 48, PSX ,6 350,4 0,50 1,90 15,0 9,1 50, PSX ,6 360,4 0,5 13,00 18,0 9, 51, PSX ,6 370,4 0,53 13,0 133,0 9,4 53, PSX ,6 380,4 0,55 13,40 136,0 9,5 54, PSX ,6 390,4 0,56 13,50 139,0 9,6 56, PSX ,6 400,4 0,58 13,90 144,0 9,8 57, PSX ,6 410,4 0,59 14,00 147,0 9,9 59, PSX ,6 40,4 0,61 14,10 150,0 10,0 60, PSX ,6 430,4 0,6 14,40 154,0 10, 6, PSX ,6 440,4 0,64 14,50 157,0 10,3 63, PSX ,6 450,4 0,65 14,80 16,0 10,5 65, PSX ,6 460,4 0,67 14,90 165,0 10,6 66, PSX ,6 470,4 0,68 15,10 168,0 10,7 67, PSX ,6 480,4 0,70 15,30 173,0 10,9 69, PSX ,6 490,4 0,71 15,40 176,0 10,9 70, PSX ,6 500,4 0,73 15,60 179,0 11,0 7, PSX ,6 510,4 0,74 15,80 184,0 11, 74, ) Other imensions on request ) Loa capacities only for absolut raial loas Crosse roller bearing PSX-08 87

88 angular-roller-slim-split-bearing Angular roller bearing PSR Angular roller bearing PSR-08

89 angular-roller-slim-split-bearing escription of shape Anguler roller bearings are generally in it s founation engineering form single-row roller bearings. Constructing a new esign using this type of bearings, the angular roller bearing can t be use alone however, but as a combine bearing pair with a secon bearing. For the transmission of axial-, raial-, an moment loas, the angular roller bearing can just be use in a combine version. Most coonly this bearing is use in a comnine version as a bearing pair (two angular roller systems) in a face-to-face or back-to-back-arrangment. The choose of the arrangment epans on the conitions of the construction an the loa positions. KMF-ANGULAR-ROLLER-BEARINGS are mae as all KMF-SLIM-SPLIT-BEARINGS an constist therefore of two non-cutting manufacture an opene bearing rings, which are complete with a separator strip fille with cyliner rollers. All rolling elements are arrange in one running irection, the pressure angle is 45. The separator strip with holen an guie rolling elements causes ue to its special shape a cover of the bearing gap an protects therefore the raceway sytem for entering of rough irt an on the other sie, it makes it more ifficult for the bearing grease to get out of the raceway system. KMF-ANGULAR-ROLLER-BEARINGS can be supplie in two ifferent types. The type series PSR-08 with raial manufacture bearing rings an the type series PSA- 08 with axial manufacture bearing rings. Both have in coen the same bearing cross cut of 8 x 8. The type series PSR-08 is the prefere type series in this bearing range, as it offers a more simple an easier to manufacture construction. This high stiffness bearing solution with its high loa capacities is integrate espacially in applications which require higher accuracy an a smooth running wthout heavier noise evelopment. The nee for specially paire bearings, as it is coon at conventional bearings is not given. KMF can supply all bearing types of the complete iameter range within the prefere series an above in short terms. Also all sizes in between the prefere series can be realize whithin short terms. Materials The bearings are mae of stainless steel X46Cr13 (material coe ). The seperator is mae of Polyamie 1. Operating conitions The temperature limits of the stanar bearing in continuous operation are -40 C an +100 C, for short perios up to +10 C. Features Consierably simplification of constructions with angular roller bearings an their connecting parts (economic construction of the connecting parts) Free choice of material for the connecting parts, e. g. aluminium Corrosion resistant an low maintenance High static an ynamic Basic loa ratings at maximal stiffnes (low eformation) Low Mass Easy to install imensions beneath preferre series can be supplie within short terms Angular roller bearing PSR-08 89

90 angular-roller-slim-split-bearing KUNSTSTOFF-METALL-FORMTEILE Fitte imensions 15,8 Shaft Ø h7 Bearing imensions s 7,9 +0,05 8,05 +0,05 8 R max 0,3 (3 x ) R 0,5 S,8 Bore Ø H7 Table of imensions (Type series PSR-08) KMF-type 1) Bearing imension Mass Basic loa ratings Limiting spees Axial Raial Bearing Pre- s S yn. yn. play loa C a C oa Cr ) C or ) n G n G grease kg min -1 min -1 PSR ,6 90,4 0,11 10,10 60,0 4,3 1, PSR ,6 100,4 0,1 10,80 66,0 4,5 13, PSR ,6 110,4 0,13 11,70 76,0 4,9 15, PSR ,6 10,4 0,14 1,0 8,0 5,1 16, PSR ,6 130,4 0,16 1,80 91,0 5,4 18, PSR ,6 140,4 0,17 13,40 97,0 5,6 19, PSR ,6 150,4 0,18 13,70 104,0 5,8 0, PSR ,6 160,4 0,0 14,40 11,0 6,1, PSR ,6 170,4 0,1 14,70 10,0 6, 3, PSR ,6 180,4 0, 15,0 16,0 6,4 5, PSR ,6 190,4 0,3 15,70 134,0 6,6 7, PSR ,6 00,4 0,5 16,10 140,0 6,8 8, PSR ,6 10,4 0,6 16,40 148,0 6,8 9, PSR ,6 0,4 0,7 17,10 156,0 7, 31, PSR ,6 30,4 0,9 17,40 16,0 7,3 3, PSR ,6 40,4 0,30 17,70 168,0 7,4 34, Angular roller bearing PSR-08

91 angular-roller-slim-split-bearing 4 KMF-type 1) Bearing imension Mass Basic loa ratings Limiting spees Axial Raial Bearing Pre- s S yn. yn. play loa C a C oa Cr ) C or ) n G fett n G grease kg min -1 min -1 PSR ,6 50,4 0,31 18,30 178,0 7,7 35, PSR ,6 60,4 0,33 18,60 184,0 7,8 37, PSR ,6 70,4 0,35 18,90 190,0 7,9 38, PSR ,6 80,4 0,37 19,40 00,0 8,1 40, PSR ,6 90,4 0,39 19,60 06,0 8,3 41, PSR ,6 300,4 0,41 19,90 1,0 8,4 4, PSR ,6 310,4 0,43 0,40,0 8,6 44, PSR ,6 30,4 0,45 0,80 8,0 8,7 45, PSR ,6 330,4 0,47 1,00 34,0 8,8 47, PSR ,6 340,4 0,49 1,50 44,0 9,0 48, PSR ,6 350,4 0,50 1,80 50,0 9,1 50, PSR ,6 360,4 0,5,00 56,0 9, 51, PSR ,6 370,4 0,53,0 66,0 9,4 53, PSR ,6 380,4 0,55,60 7,0 9,5 54, PSR ,6 390,4 0,56,80 78,0 9,6 56, PSR ,6 400,4 0,58 3,50 88,0 9,8 57, PSR ,6 410,4 0,59 3,70 94,0 9,9 59, PSR ,6 40,4 0,61 3,80 300,0 10,0 60, PSR ,6 430,4 0,6 4,30 308,0 10, 6, PSR ,6 440,4 0,64 4,50 314,0 10,3 63, PSR ,6 450,4 0,65 5,00 34,0 10,5 65, PSR ,6 460,4 0,67 5,0 330,0 10,6 66, PSR ,6 470,4 0,68 5,50 336,0 10,7 67, PSR ,6 480,4 0,70 5,90 346,0 10,9 69, PSR ,6 490,4 0,71 6,00 35,0 10,9 70, PSR ,6 500,4 0,73 6,40 358,0 11,0 7, PSR ,6 510,4 0,74 6,70 368,0 11, 74, ) Other imensions on request ) Loa capacities only for absolut raial loas With in pairs arrange camps is vali: C or x un C r x 1,65 Angular roller bearing PSR-08 91

92 Axial-angular-ROLLER-SLIM-SPLIT-BEARING KUNSTSTOFF-METALL-FORMTEILE Construction examples Angular roller bearing PSR in back-to-back mounting 1) Angular roller bearing Typ PSR in face-to-face mounting 1) Ajustment surface Ajustment surface 1) face-to-face an/or back-to-back mounting emboies the situation of the pressure angles to each other 9 Angular roller bearing PSR-08

93 Axial-angular-ROLLER-SLIM-SPLIT-BEARING Axial-Angular roller bearing PSA-08 Axial-Angular roller bearing PSA-08 93

94 Axial-angular-ROLLER-SLIM-SPLIT-BEARING KUNSTSTOFF-METALL-FORMTEILE Fitte imensions Bearing imensions 8,1-0,05 Shaft Ø h7 8,7 +0,1 8 8,7 +0,1 R max 0,3 (4 x ) 8,1 +0,05 R 0,5 (4 x ) Bore Ø h7 Table of imensions (Type series PSA-08) KMF-type 1) Bearing imension Mass Basic loa ratings Limiting spees Axial Raial Bearing Pre- s S yn. yn. play loa C a C oa Cr ) C or ) n G n G grease kg min -1 min -1 PSA ,6 160,4 0,0 14,40 11,0 6,1, PSA ,6 170,4 0,1 14,70 10,0 6, 3, PSA ,6 180,4 0, 15,0 16,0 6,4 5, PSA ,6 190,4 0,3 15,70 134,0 6,6 7, PSA ,6 00,4 0,5 16,10 140,0 6,8 8, PSA ,6 10,4 0,6 16,40 148,0 6,8 9, PSA ,6 0,4 0,7 17,10 156,0 7, 31, PSA ,6 30,4 0,9 17,40 16,0 7,3 3, PSA ,6 40,4 0,30 17,70 168,0 7,4 34, PSA ,6 50,4 0,31 18,30 178,0 7,7 35, PSA ,6 60,4 0,33 18,60 184,0 7,8 37, PSA ,6 70,4 0,35 18,90 190,0 7,9 38, Axial-Angular roller bearing PSA-08

95 Axial-angular-ROLLER-SLIM-SPLIT-BEARING 4 KMF-type 1) Bearing imension Mass Basic loa ratings Limiting spees Axial Raial Bearing Pre- s S yn. yn. play loa C a C oa Cr ) C or ) n G fett n G grease kg min -1 min -1 PSA ,6 80,4 0,37 19,40 00,0 8,1 40, PSA ,6 90,4 0,39 19,60 06,0 8,3 41, PSA ,6 300,4 0,41 19,90 1,0 8,4 4, PSA ,6 310,4 0,43 0,40,0 8,6 44, PSA ,6 30,4 0,45 0,80 8,0 8,7 45, PSA ,6 330,4 0,47 1,00 34,0 8,8 47, PSA ,6 340,4 0,49 1,50 44,0 9,0 48, PSA ,6 350,4 0,50 1,80 50,0 9,1 50, PSA ,6 360,4 0,5,00 56,0 9, 51, PSA ,6 370,4 0,53,0 66,0 9,4 53, PSA ,6 380,4 0,55,60 7,0 9,5 54, PSA ,6 390,4 0,56,80 78,0 9,6 56, PSA ,6 400,4 0,58 3,50 88,0 9,8 57, PSA ,6 410,4 0,59 3,70 94,0 9,9 59, PSA ,6 40,4 0,61 3,80 300,0 10,0 60, PSA ,6 430,4 0,6 4,30 308,0 10, 6, PSA ,6 440,4 0,64 4,50 314,0 10,3 63, PSA ,6 450,4 0,65 5,00 34,0 10,5 65, PSA ,6 460,4 0,67 5,0 330,0 10,6 66, PSA ,6 470,4 0,68 5,50 336,0 10,7 67, PSA ,6 480,4 0,70 5,90 346,0 10,9 69, PSA ,6 490,4 0,71 6,00 35,0 10,9 70, PSA ,6 500,4 0,73 6,40 358,0 11,0 7, PSA ,6 510,4 0,74 6,70 368,0 11, 74, ) Other imensions on request ) Loa capacities only for absolut raial loas With in pairs arrange camps is vali: C or x un C r x 1,65 Axial-Angular roller bearing PSA-08 95

96 Important notices for all types of bearings Initial operation an maintenance 96 Initial operation an maintenance

97 Important notices for all types of bearings Mounting an ismounting of bearings ue to its opene bearing rings an the cage with hole an guie rolling elements, the fitting of the SLIM-SPLIT-BEARING is simple. Compare to coon massive bearings it is not neccessary to press fit slimsplit bearings. ue to the structural shape of this bearing. It easily can be mounte an ismounte. It also oes not require certain tools or thermal support. So, turne bearing fits with H- or h7-fits for shaft an bore tolerances (see fitte imensions) suffice to contain a bearing. Precision The bearing rings of the type series SLIM-SPLIT-BEAR- ING are very accurate in shape. The ifference of the even-thickness between raceway an insie or outsie iameter is really small. That s why the axial raial precision of the bearings is greatly influence by the precision of the connecting parts. The connecting parts shoul be constructe in a way that all iameters an faces that stay in relation to each other are machine in one spanning operation, if possible. So, the customer is able to efine an manufacture the emans on precision on his own. Bearing clearance The SLIM-SPLIT-BEARING has no fixe clearance in the bearing an the preloa of the bearing is not efine. Either this can be ajuste by the customer irectly by etermining the shaft an bore tolerances of the bearing fits. In the stanar version an with given fitte tolerances, the SLIM-SPLIT-BEARING is slightly preloae in the raceway system. This means that even if tolerances are use to the maximum, no clearance in the bearing is given. epening on the application an the specific emans, a clearance can be given by ajusting the shaft an bore tolerances in orer to reuce the starting torques. Also the tolerances can be ajuste in orer to increase the preloa, which increases the starting torque of the bearings rastically. If insert rooms shoul be given e. g. a competitive proucts shall be replace, an therefore can t be ajuste, the clearance in the bearing can be ajuste. This ajustment is achieve by using slightly bigger or smaller rolling elements. Initial operation an maintenance 97

98 Important notices for all types of bearings KUNSTSTOFF-METALL-FORMTEILE For ifferent emans on a bearing type, ifferently colore cage strips with ifferent sorts of rolling elements can be use. These iffrent colors make it easy to fin the most suitable bearing version. Lubrication In orer to increase the nominal service life, Lubrication is an important criteria. For 90 % of all bearing applications in stanar operations, grease is sufficient. Grease of the consistency-class an 3 (acc. to IN 51818) is preferre. The grease prevents the irect contact between rolling element, raceway an cage an minimises therefore the friction. This minimises the abrasion an increases lifetime. As the lubricant for KMF-SLIM-SPLIT-BEARING has not the function to protect the bearing from corrosion, relatively small amounts of grease is sufficient for a reliable function. The KMF-SLIM-SPLIT-BEARING is equippe stanarly with a pregreasing using ALVANIA EP (Shell), which functions as a permanent lubrication at normal operating conitions. That s why no targets for lubricating intervals or lubricating amounts are given. KMF-bearings require low maintenance an can be consiere for normal slewing operations as maintenance free. For special applications, the KMF-SLIM-SPLIT- BEARING can be equippe with special greases accoring to customers emans. Short sign G04 G G3 G4 G5 Lubricant Soli lubrication with MOS High temperature grease +60 C ynamic light bearing grease for low torques For applications in high vacuum Raiation resistant grease for meical applications In orer to iffer these versions from the stanar bearings, a short sign is ae to the KMF-type. Some examples at the right sie: 98 Initial operation an maintenance

99 Important notices for all types of bearings Filling of the bearing The Conra-Filling-Metho The picture on the left sie shows how conventional bearings have to be assemble; this way is also known as the Conra-Filling-Metho. The bearing inner ring is place excentrically in orer to cause a bigger bearing gap on the opposite sie. Using this bigger bearing gap, the balls are integrate into the raceway system. This bearing gap etermines an fixes the maximum amount an the maximum iameter of the balls that can be integrate into the bearing. After that a snap-over cage strip with large ball ivisions is integrate in orer to place the balls equally in the raceway system an prevent them of touching an running against each other. ue to this only possibility of assembling a conventional bearing, only a few, an compare to the bearing cross-cut, relatively small balls can be integrate. This fact influences the static ynamic loa capacities negatively. Integration of the snap-over separator strip Initial operation an maintenance 99

100 Important notices for all types of bearings KUNSTSTOFF-METALL-FORMTEILE The KMF- Metho The SLIM-SPLIT-BEARING is only manufacture with splitte bearing rings. Beneath the ajustability of the bearing clearance an the bearing preloa, there are aitional avantages: The bearing can be fittte more easily in the connecting parts an great avantages are given uring the assembly. Besies the quality avantages that are offere by our proucts, they also offer price avantages ue to our manufacturing technology an The cage strips are fille with ifferent ball iameters. ifferent colors helps iffering the iniviual iameters. easy assembly. An automatically fille cage strip is place on the inner ring, the outer ring is place in assembly conition an has just to be presse slightly over the inner ring an the separator. ue to this filling metho, KMF is able to integrate much more an much bigger balls in the same cross-cut of the bearing. This greatly influences our static an ynamic loa capacities compare to the equivalent competition bearings. En assembly 100 Initial operation an maintenance

101 Slewing bearing SLIM-SPLIT-BEARING Slewing Bearing YKT Slewing Bearing PXU Slewing Bearing YKTI Slewing Bearing PXI Slewing Bearing PXA Slewing Bearing YKTA 101

102 Slewing bearing SLIM-SPLIT-BEARING KMF-Thin Ring Bearing-Slewing bearing Light silent an combine loaable ue to increasing automating in many inustries, e. g. the semiconuctor inustry more space saving insert elements or thin ring bearings are require. From irect riven rotary tables to simple hanling tools space an Mass saving as well as precise bearing units are requeste. In orer to fulfill these market nees, KMF offers a large variety of bearing elements like wire ball bearings, SLIM-SPLIT-BEARINGs, axial bearing washers an axial roller an cage assemblies as insert elements for irect integration in customers con-structions. Actually this elivery progra is increase by the slewing bearing assembly YKT, which are complete reay to assemble an pregrease bearing units. The raceway system consists of two axial thrust ball bearings type PBAU with four point geometry. This bearing esign is able to take loas from all irections (axial an raial), as well as moment loas. Typically for insert elements is the relatively small bearing hight of 14 of the YKT bearing series. The both axial thrust ball bearing, which are forming the raceway system, are unepenant of the iameter; this guarantees a stable bearing cross-cut of only 37,5 x 0, which is vali for the complete preferre series from bore iameter 100 to 450. Furthermore this system offers the possibility of manufacturing types between preferre series as well as slight changes to bearing shape. KMF-Slewing bearing SLIM-SPLIT-BEARING with it s extremely hight integrate in constructions, which have not sufficient space for conventional catalogue bearings. The reay to assemble easy mounting an easy to maintain bearing units type series YKT are fixe an screwe with the connecting parts via the bearing centering (see tabl of imensions). The play an the preloa in the bearing is ajustable. The shape of the bearing with its two raceway systems guarantees a stable running culture with small starting torques an small noise evelopement. The starting torque epens on the axial preloa; increasing the preloa increases threfore the torque. 10 KMF-Thin Ring Bearing-Slewing bearing

103 Slewing bearing SLIM-SPLIT-BEARING espite of the filigree construction of the KMF slewing bearings, they are nevertheless constructe accoring to the principle of economy. ifferent special option increase the application spectrum an assist iniviual construction emans without changing basic pricings consierably. The KMF-Slewing bearing SLIM-SPLIT-BEARING is suitable for many application areas, e. g. clean room, meicine- an foo inustry ue to special material combinations (corrosion resistant steel, light metal, ceramic, plastics). Bearing units of the type series YKT are offere in ifferent versions, using bearing rings mae of steel or completely corrosion resistant. This completely corrosion resistant version has the short sign SS for stainless steel, the eloxate light metal version the short sign AL for aluminium. Furthermore offers the light metal version naturally the avantage of the Mass ecrease of up to 66 % compare with the steel version. Aitionally, changes to the bore plan can be realise as well as lubrication bores. Spur-toothe bearing inner an outer rings belong to the enhance stanar version as well as worm gear toothing for irect rives. Aitionally externally flange or integrate slip ring solutions for power transmission from the static to the ynamic bearing ring is possible. KMF-Thin Ring Bearing-Slewing bearing 103

104 Slewing bearing SLIM-SPLIT-BEARING Thin ring bearing-slewing bearing YKT, YKTI, YKTA 104 Thin ring bearing-slewing bearing YKT, YKTI, YKTA

105 Slewing bearing SLIM-SPLIT-BEARING imensions YKT (without toothing) h7 Ø 11 L Ø 6,6 Ø 6,6 i H7 A L Table of imensions YKT (without toothing) KMF- Bearing imension Number Mass Basic loa ratings Limiting type 1) of Axial Raial spees i A L L bores Steel Al yn. yn. H7 h7 S Z C a C oa C r C or n G grease Pieces kg kg min -1 YKT ,7 0,7 6,5 48, 5,9 19, 1090 YKT ,3 1,0 7,4 67,0 6,7 6,8 800 YKT ,0 1, 8,0 85,0 7,3 34,0 640 YKT ,6 1,5 8,6 104,0 7,8 41,4 530 YKT , 1,8 9,3 1,0 8,3 48,8 450 YKT ,9,1 9,8 140,0 8,8 56,0 390 YKT ,5,3 10,1 160,0 9,1 64,0 350 YKT ,1,6 10,6 178,0 9,6 71, ) Other imensions on request Thin ring bearing-slewing bearing YKT, YKTI, YKTA 105

106 Slewing bearing SLIM-SPLIT-BEARING KUNSTSTOFF-METALL-FORMTEILE imensions YKT (without toothing) h7 L 0 Ø 11 K Ø 6,6 Ø 6,6 L A i H7 Table of imensions, Toothing information YKTI (inner geare) Inner toothing KMF- Pitch- Moule Number Tip- Mass Limiting Maximum permissible tooth force type 1) circle-ø of teeth circle-ø spees Steel AL 0 m Z k Stahl AL n G grease F Z norm. F Z max. F Z norm. F Z max. Pieces kg kg min -1 N N N N YKTI ,8 0, YKTI ,4 1, YKTI ,1 1, YKTI ,7 1, YKTI ,3 1, YKTI ,0, YKTI ,6, YKTI ,, ) Other imensions on request Toothing acc. to IN 3967 Quality 8e5 Reference IN 867 For the basic imensions of the Slewing bearing please take a look at the table of imensions YKT 106 Thin ring bearing-slewing bearing YKT, YKTI, YKTA

107 Slewing bearing SLIM-SPLIT-BEARING imensions YKTA (outer toothing) h7 L Ø Ø 6,6 Ø 6,6 i H7 A L 0 K Table of imensions, Toothing information YKTA (outer geare) Outer toothing KMF- Pitch- Moule Number Tip- Mass Limiting Maximum permissible tooth force type 1) circle-ø of teeth circle-ø spees Steel AL 0 m Z k Stahl AL n G grease F Z norm. F Z max. F Z norm. F Z max. Pieces kg kg min -1 N N N N YKTA ,3 0, YKTA ,9 1, YKTA ,6 1, YKTA , 1, YKTA ,8, YKTA ,5, YKTA ,1, YKTA ,7, ) Other imensions on request Toothing acc. to IN 3967 Quality 8e5 Reference IN 867 For the basic imensions of the Slewing bearing please take a look at the table of imensions YKT Thin ring bearing-slewing bearing YKT, YKTI, YKTA 107

108 Slewing bearing SLIM-SPLIT-BEARING KUNSTSTOFF-METALL-FORMTEILE Inner iameter YKT YKTI YKTA Example of orer YKT YKT 50 YKTI 50 YKTA 50 SS SS SS AL AL AL YKT Without geare 50 Inner iameter empty Bearing rings Steel I With inner geare SS Bearing rings Stainless steel A With outer geare AL Bearing rings Light metal 108 Thin ring bearing-slewing bearing YKT, YKTI, YKTA

109 Slewing bearing SLIM-SPLIT-BEARING Crosse roller bearing - Slewing bearing PXU, PXI, PXA Crosse roller bearing - Slewing bearing PXU, PXI, PXA 109

110 Slewing bearing SLIM-SPLIT-BEARING KUNSTSTOFF-METALL-FORMTEILE imensions PXU (without toothing) s Ø 6,8 Ø 6, s L L Slewing bearing PXU 110 Crosse roller bearing - Slewing bearing PXU, PXI, PXA

111 Slewing bearing SLIM-SPLIT-BEARING Table of imensions PXU (without toothing) KMF-type 1) Bearing imension Mass s S L L kg PXU ,35 PXU ,50 PXU ,65 PXU ,80 PXU ,95 PXU ,10 PXU ,5 PXU ,40 PXU ,55 PXU ,70 PXU ,85 PXU ,00 PXU ,15 PXU ,30 PXU ,45 PXU ,60 PXU ,75 PXU ,90 PXU ,05 PXU ,0 PXU ,35 PXU ,50 PXU ,65 PXU ,80 PXU ,95 1) Other imensions on request Crosse roller bearing - Slewing bearing PXU, PXI, PXA 111

112 Slewing bearing SLIM-SPLIT-BEARING KUNSTSTOFF-METALL-FORMTEILE Table, Type series PXU, PXI, PXA (Number of bores, Basic loa ratings, Limiting spees) KMF-type Number of bores PXU PXI PXA Inner ring Outer ring S Z S Z Pieces Pieces PXU PXI PXA x 45 8 x 45 PXU PXI PXA x 45 8 x 45 PXU PXI PXA x 45 8 x 45 PXU PXI PXA x 45 8 x 45 PXU PXI PXA x 45 8 x 45 PXU PXI PXA x 45 8 x 45 PXU PXI PXA x 45 8 x 45 PXU PXI PXA x 45 8 x 45 PXU PXI PXA x x 36 PXU PXI PXA x x 36 PXU PXI PXA x x 36 PXU PXI PXA x x 36 PXU PXI PXA x x 36 PXU 04 0 PXI 04 0 PXA x x 36 PXU PXI PXA x x 36 PXU PXI PXA x x 36 PXU PXI PXA x x 36 PXU PXI PXA x 36 1 x 30 PXU PXI PXA x 36 1 x 30 PXU PXI PXA x 36 1 x 30 PXU PXI PXA x 36 1 x 30 PXU PXI PXA x 30 1 x 30 PXU PXI PXA x 30 1 x 30 PXU PXI PXA x 30 1 x 30 PXU PXI PXA x 30 1 x Crosse roller bearing - Slewing bearing PXU, PXI, PXA

113 Slewing bearing SLIM-SPLIT-BEARING Basic loa ratings Limiting spees Axial Raial Bearing play Preloa yn. yn. C a C oa C r C or n G n G min -1 min -1 6,1 30,0 4,3 1, ,4 33,0 4,5 13, ,9 38,0 4,9 15, , 41,0 5,1 16, ,6 45,5 5,4 18, ,9 48,5 5,6 19, ,1 5,0 5,8 0, ,5 56,0 6,1, ,7 60,0 6, 3, ,0 63,0 6,4 5, ,3 67,0 6,6 7, ,5 70,0 6,8 8, ,7 74,0 6,9 9, ,1 78,0 7, 31, ,3 81,0 7,3 3, ,5 84,0 7,4 34, ,8 89,0 7,7 35, ,0 9,0 7,8 37, , 95,0 7,9 38, ,5 100,0 8,1 40, ,6 103,0 8,3 41, ,8 106,0 8,4 4, ,1 111,0 8,6 44, ,3 114,0 8,7 45, ,4 117,0 8,8 47, Crosse roller bearing - Slewing bearing PXU, PXI, PXA 113

114 Slewing bearing SLIM-SPLIT-BEARING KUNSTSTOFF-METALL-FORMTEILE imensions PXI (inner geare) s 0 Ø 6,8 Ø 6,8 k L s L Slewing bearing PXI 114 Crosse roller bearing - Slewing bearing PXU, PXI, PXA

115 Slewing bearing SLIM-SPLIT-BEARING Table of imensions, Toothing information PXI (inner geare) KMF-type 1) Pitch- Moule Number Tip- Mass Maximum per- circle-ø of teeth circle-ø missible tooth force 0 m Z k F Z norm. F Z max. Pieces kg N N PXI , PXI , PXI , PXI , PXI , PXI , PXI , PXI , PXI , PXI , PXI , PXI , PXI , PXI , PXI , PXI , PXI , PXI , PXI , PXI , PXI , PXI , PXI , PXI , PXI , ) Other imensions on request Toothing acc. to IN 3967 Quality 8e5 Reference IN 867 For the basic imensions of the Slewing bearing please take a look at the table of imensions PXU Crosse roller bearing - Slewing bearing PXU, PXI, PXA 115

116 Slewing bearing SLIM-SPLIT-BEARING KUNSTSTOFF-METALL-FORMTEILE imensions PXA (outer geare) k 01 s L Ø 6,8 Ø 6, s L Slewing bearing PXA 116 Crosse roller bearing - Slewing bearing PXU, PXI, PXA

117 Slewing bearing SLIM-SPLIT-BEARING Table of imensions, Toothing information PXA (outer geare) KMF-type 1) Pitch- Moule Number Tip- Mass Maximum per- circle-ø of teeth circle-ø missible tooth force 01 m Z k F Z norm. F Z max. Pieces kg N N PXA , PXA , PXA , PXA , PXA , PXA , PXA , PXA , PXA , PXA , PXA , PXA , PXA , PXA , PXA , PXA , PXA , PXA , PXA , PXA , PXA , PXA , PXA , PXA , PXA , ) Other imensions on request Toothing acc. to IN 3967 Quality 8e5 Reference IN 867 For the basic imensions of the Slewing bearing please take a look at the table of imensions PXU Crosse roller bearing - Slewing bearing PXU, PXI, PXA 117

118 Slewing bearing SLIM-SPLIT-BEARING Thin ring bearing-slewing bearing PBV Left picture shows a two-rowe bearing with three bearing rings that can be move un- epenantly from each other. Left picture shows a bearing with an aitional raceway for combination with a rive wheel. An extremely small starting torque is guarantee by an increase play in the bearing, a reuce amount of rolling boy elements as well as the usage of special smooth running grease. Also possible is a solution with integrate slip rings for power or signal tranmission. 118 Thin ring bearing-slewing bearing PBV

119 Slewing bearing SLIM-SPLIT-BEARING Slewing bearings special configuration Without gear teeth Internal gear teeth External gear teeth KMF-Slewing bearings in special configuration can be use as an alternative for Thin ring bearings. They have the same height as thin ring bearings of the A-, C- or -cross-section. 6,35 9,55 1,7 A-cross-section C-cross-section -cross-section Slewing bearings special configuration 119

120 Accessories Sealings Sealing profiles escription of shape One can seal to the ajacent structure with KMF sealing profiles, epening on the requirements an the type of pollution. We have evelope some sealing profiles as yargoos for this purpose, which meet ifferent requirements. For infinite purposes, the interfaces must be flat an free of grease. A cyan acrylate glue can be use as the glue. One must take care that there is no spillase when attache to the surfaces. Material The stanar material of the sealing profile is NBR 70 (Shore harness of 70), which has prove successful ue to ist resistance to oil an grease an its goo resistance to wear. Operating conitions The sealing profiles can be use at working temperatures of -40 C to +80 C. 10 Sealing profiles

121 Accessories Sealings Sealing profiles Short Require iameter Characteristics sign space range Axial Raial (gui) sealing sealing a b Axial Raial S > Ø 400 > Ø 400 Robust seal increase friction S > Ø 00 > Ø 00 Normal seal low friction S > Ø 400 > Ø 400 Protecte bearing gap seal S7 7 5 > Ø 00 > Ø 00 Protecte bearing gap seal low space requirement S > Ø 00 High pressure ue to Spring-loae sealing lip, preferre for oscillating operation R 1,5,7 > Ø 00 > Ø 00 Static seal R3,3 4,0 R4 3,1 5,4 Installation rawings are available for the iniviual seal profiles. Please ask for them. Sealing profiles 11

122 Approach irections to the company... Würzburg A7 exit Aalen/Westhausen A7 Westhausen B9 Bopfingen irection Stuttgart Aalen A7 Lauchheim B9 irection Nörlingen B9 B19 Ulm irection Aalen B9 istrict Aufhausen Möbel Mahler B9 Sports fiel Fire fighters Bopfingen B9 irection Nörlingen 1 irections to the company...

123 Approach... starting from the B9 in the Nörlingen irection... shortly after entering the Bopfingen, turn right at the Fire Station, then after 30 m, turn left again, follow the street, pass the Sports Staium, turn right on the Postweg, we are locate 00 m along the right han sie.... starting from the A7 exit Aalen/Westhausen... take the B9 in the Nörlingen irection. Shortly before the exit to the Fire Station, turn left, then after 30 m, turn left again, follow the street, pass the Sports Staium, turn right on the Postweg, we are locate 00 m along the right han sie. KMF Kunststoff-Metall-Formteile GmbH Postweg Bopfingen Phone 0736/7001 Fax 0736/7007 info@kmf-bearings.e irections to the company... 13

124 Notes 14 irections to the company...

125 irections to the company... 15

126 KMF Kunststoff-Metall-Formteile GmbH Postweg Bopfingen Phone 0736/7001 Fax 0736/7007