Unimaster Dust Collectors Series UMA

Transcription

1 Unimaster Dust ollectors Series UM 70-2 require for maintenance Lifting bracket (removable) 20 minimum clearance 80 require for cleaner motor cover removal leane air outlet 102 coustic iffuser (may be fitte with optional seconary or absolute filter)* Donalson Terminal box Torit DE Fan chamber leaner motor Filter chamber Joint line e ontaminate air inlet (may be fitte either sie or at rear) f to centre of inlet spigot Quick-release sealer gear Dust container SIDE ELEVTION FRONT ELEVTION UNIMSTER DUST OLLETOR WITH DUST ONTINER UM 15 illustrate. Suitable for insie locations. *Seconary filter an absolute filter not available for UM 72 ust collector. SPEIFITION Filtration area e f Inlet spigot (insie ia.) mm UM m Ø 101 UM m Ø 20 UM 15 UM m m Donalson reserve the right to alter esign without notice Fan Motor rating Dust container G1 G kw 0.75 kw 1. kw 55 litre Ø 20 KV5 KV7 G8 1. kw 2.20 kw.00 kw 5. kw Ø 254 KV5 KV7 G8 1. kw 2.20 kw.00 kw 5. kw Net weight (approx.) 20 kg 295 kg 00 kg 8 kg kg 78 kg 9 kg 4 kg 465 kg 190 kg 5 kg

2 Unimaster Dust ollectors Series UM 70-2 require for maintenance 20 minimum clearance Lifting bracket (removable) require for cleaner motor cover removal leane air outlet coustic iffuser (may be fitte with optional seconary or absolute filter)* Donalson Terminal box Torit DE Fan chamber leaner motor Filter chamber Seating level SIDE ELEVTION FRONT ELEVTION UNIMSTER HOPPER TYPE DUST OLLETOR UM 1H illustrate. Suitable for insie locations. *Seconary filter an absolute filter not available for UM 70H ust collector. SPEIFITION Fan Motor rating Net weight (approx.) G1 G kw 0.75 kw 1. kw 170 kg 2 kg 2 kg 800 KV5 KV7 G8 1. kw 2.20 kw.00 kw 5. kw 275 kg 290 kg 15 kg 0 kg 11 KV5 KV7 G8 1. kw 2.20 kw.00 kw 5. kw 60 kg 75 kg 0 kg 415 kg Filtration area UM 70H 6.2 m UM 100H 9.29 m UM 1H UM 2H 1.94 m m DUST ONTINER Typical ust ensities pprox net weight Size 55 litre (2 cu.ft.) ( cu.ft.) 55 litre 5 kg 6 kg reasonable total loa for removal by han woul be 25 kg 2 Dust Saner Graphite San Iron Steel Density with % voiage 0.1 kg/litre 0.80 kg/litre 1. kg/litre.58 kg/litre.72 kg/litre

3 Unimaster Dust ollectors Series UM 70-2 require for maintenance 20 minimum clearance Lifting bracket (removable) 80 require for cleaner motor cover removal leane air outlet 90 Donalson leaner motor Torit DE Filter chamber Seating level SIDE ELEVTION FRONT ELEVTION UNIMSTER VENTING TYPE DUST OLLETOR UM 1V illustrate. Suitable for insie locations an outsie when fitte with optional weather cowl. SPEIFITION UM 70V 6.2 m kg UM 100V 9.29 m kg UM 1V 1.94 m kg UM 2V m kg require for maintenance Net weight (approx.) Filtration area 20 minimum clearance Lifting bracket (removable) leane air outlet 90 leaner motor 80 require for cleaner motor cover removal Donalson Torit DE Filter chamber Joint line e Quick-release sealer gear ontaminate air inlet (may be fitte either sie or at rear) f to centre of inlet spigot Dust container SIDE ELEVTION FRONT ELEVTION UNIMSTER VENTING TYPE DUST OLLETOR WITH DUST ONTINER UM 15V illustrate. Suitable for insie locations an outsie when fitte with optional weather cowl. SPEIFITION f Inlet spigot (insie ia.) mm Dust container Net weight (approx.) Ø litre 126 kg Ø kg Ø kg Ø kg Filtration area e UM 72V 6.2 m UM 10V 9.29 m UM 15V 1.94 m 1542 UM 25V m

4 Unimaster Dust ollectors Series UM 70-2 require for maintenance 20 minimum clearance Lifting bracket (removable) require for cleaner motor cover removal leane air outlet coustic iffuser (may be fitte with optional seconary or absolute filter) Donalson Terminal box Torit DE Fan chamber leaner motor Filter chamber Joint line Quick-release hatch (remove when tipping) Stanar opening on all moels: 680 wie x 700 eep lternative insert with swing oor for sack tipping units fitte with optional explosion relief panels Opening: 5 wie x 665 eep e Seating level SIDE ELEVTION FRONT ELEVTION UNIMSTER SK TIPPING UNIT UM 1STU illustrate. Suitable for insie locations. SPEIFITION Filtration area e Fan Motor rating Net weight (approx.) UM 100STU 9.29 m kw 1 kg UM 1STU 1.94 m kw 68 kg UM 2STU m kw 55 kg DESIGN LIMITS (stanar equipment) Temperature range 10 to +60 Pressure limits: ollectors with fan: as fan performance curves from shut-off to operating pressure Venting type collectors: 00 mm W.G. to +2 mm W.G. Dimension tolerances: ± mm on main imensions; ±2 mm on etail imensions 4

5 Unimaster Dust ollectors Series UM 70-2 c c UM UM UM UM 2 LENED IR OUTLET DETILS UM 1 illustrate UM 70V UM 100V an 1V UM 2V LENED IR OUTLET DETILS FOR VENTING TYPE OLLETORS ll holes 4 mm 5

6 Unimaster Dust ollectors Series UM UM 70H an 70V UM 100H an 100V UM 1H an 1V UM 2H an 2V PERTURE ND MOUNTING FLNGE DETILS FOR HOPPER ND VENTING TYPE OLLETORS ll holes 12 mm for M10 bolts 6 8

7 Unimaster Dust ollectors Series UM UM 100STU UM 1STU Safety bars (0 x 0 x 5 RS) wele at equal intervals between sie members UM 2STU PERTURE ND MOUNTING FLNGE DETILS FOR SK TIPPING UNITS ll holes 12 mm for M10 bolts 7 865

8 Unimaster Dust ollectors Series UM 70-2 UNIT PERFORMNE URVES FN SELETION These curves inicate static pressure available at fan inlet for a given volume when fitte insie a Unimaster ust collector. To select the most suitable fan for a given application: 1 Determine the air volume, in m/h, neee to entrain the ust. 2 Rea off the unit resistance, in mm W.G., at air volume require. ssess pressure rop over filter bags prior to cleaning, usually to 100 mm W.G. 4 Estimate pressure rop through connecte system i.e. between point of entrainment an collector inlet. 5 The sum of 2, an 4 W.G. require. 6 onsult graph for fan performances available. Sack Tipping Units have (1.5 kw) fans with moifie outlet to ensure aequate face velocities at the tipping hatch uner normal operating conitions. Typically, the exhaust rate for the UM 2STU is 1275 m/h (7 cfm). ELETRIL REQUIREMENTS US ontroller Voltage input: 220-2V, Single Phase, Hz (for collectors with G1 or fans only) V / V, Three Phase, Hz 2-277V / 4-480V, Three Phase, 60Hz or to suit local voltage 8

9 Unimaster Dust ollectors Series UM 70-2 NOISE LEVELS Machinery noise levels are an important consieration in the esign an selection of new equipment. Several E Directives an National Laws/Regulations aopting these irectives make reference to airborne noise emissions. ctions that employers are require to comply with if employees are subjecte to a aily personal noise exposure Lep, of 80 () or more are also specifie. ll Unimaster ust collectors, when fitte with an acoustic iffuser, seconary filter or absolute filter, operating an 8 hour shift, are below this action limit. WEIGHTED SOUND PRESSURE LEVELS ll reaings were taken in normal inustrial areas, i.e. semi-reverberant surrounings, with local equipment silent. Measurements were taken at maximum air flow conitions at 1.0 metre raius from the equipment housing an 1.6 metres above base level, using a precision soun level meter an octave filter. With acoustic iffuser With seconary filter With absolute filter G1 KV5 KV7 G8 65 () * * 67 () 67 () 67 () 69 () 69 () 69 () 69 () 69 () 69 () 72 () 72 () 72 () Noise levels of installe equipment may vary ue to site conitions. Measure ata. *Seconary an absolute filter not supplie with G1 fan. c 1 minimum clearance SIDE ELEVTION (Detail of cleane air outlet with weather cowl an li remove) SIDE ELEVTION FRONT ELEVTION OPTIONL WETHER OWL UM 1V illustrate SPEIFITION c Net weight (approx.) UM 70V kg UM 100V kg UM 1V kg UM 2V kg 9 194

10 Unimaster Dust ollectors Series UM Joint line RER ELEVTION SIDE ELEVTION POSITION OF OPTIONL EXPLOSION RELIEF FLNGE UM 15 illustrate UM type Dimension in mm: H H 1H 2H V V 1V V V 15V 25V If a vent uct is not connecte to the explosion relief flange, then a minimum clearance of 0 mm shoul be mae to the rear of the collector to ensure efficient operation of the explosion venting process. onsieration shoul be given to the local surrouning area in regars to the pressure an flame effects (UM 100) 209 (UM 1) 14 (UM 2) 548 (UM 100 an 1) 614 (UM 2) (UM 100 an 1) 2 (UM 2) RER ELEVTION SIDE ELEVTION POSITION OF OPTIONL EXPLOSION RELIEF FLNGES FOR SK TIPPING UNITS UM 1STU illustrate If vent ucts are not connecte to the explosion relief flanges, then a minimum clearance of 0 mm shoul be mae to the rear of the collector to ensure efficient operation of the explosion venting process. onsieration shoul be given to the local surrouning area in regars to the pressure an flame effects. 10

11 Unimaster Dust ollectors Series UM mm mm mm mm UM 70 UM 100 an mm mm UM 2 OPTIONL EXPLOSION RELIEF FLNGE MOUNTING DETILS ll vertical holes rille 10 mm for M8 bolts. ll horizontal holes threae to accept M8 bolts. 11

12 Unimaster Dust ollectors Series UM 70-2 Donalson ustralasia Donalson Japan Website: Donalson Southeast sia Website: Donalson hina Website: Donalson Korea Website: Donalson US Website: Donalson South sia Website: Donalson Europe Website: Website: