Linear Bearing General Information
|
|
|
- Teresa Green
- 5 years ago
- Views:
Transcription
1 1 Linear Bearing General Information 1-1 Characteristics of HIIN Linear Bearing HIIN linear bearings enable high precision linear motion on roun shafts by utilizing recirculating ball pathways. The patente recirculation curve enables HIIN s linear bearing to sustain heavy loas with low noise an high stiffness. HIIN s iverse line of linear bearings perform uner almost any environmental conitions an loa capacities to satisfy a wie range of applications. 1-2 Description JB F L 25 A iper Coe Description Coe Description JB UB Japanese Spec. (metric system) European Spec. (metric system) Lengthene none No iper Single Sie iper Double Sie iper Usage Coe none M K F Description Stanar Heavy Duty Square Flange Roun Flange Assembly Coe Description A Stanar Close AJ Clearance Ajustable OP Open
2 1-3 Fitting Moel (Housing) Accuracy Normal clearance Close clearance Loose fit Transition fit General grae g6 h6 H7 J7 JB Precision grae g5 h5 H6 J6 UB General grae g6 j6 H7 J7 Note: In general fitting conition shaft is clearance fit Installation: 1. Stanar Close Installation: Fig. 1 Installation with snap-rings. Fig. 2 Installation with setting plate.
3 2. Installation of the Clearance Ajustment Fig Installation of the Open 4. Installation of the Flange Fig. 4 Note: To achieve optimal life performance it is recoene that installation follow the iagram below accoring to the corresponing number of ball rows an loa irections. 4 rows 5 rows 6 rows 8 rows Fig. 5
4 2 2-1 Metric Dimension UB Series: Metric Dimension Series Use Most Frequently in Europe UB - * * A ( Stanar Close ) UB - * * AJ ( Clearance Ajustable ) UB - * * OP ( Open ) Stanar Close Clearance Ajustable Moel Major Dimensions an Loa Capacity Open D L B D1 h h1 8 UB-8A 4 UB-8AJ UB-12A 5 UB-12AJ 5 UB-12OP UB-16A 5 UB-16AJ 5 UB-16OP UB-2A 5 UB-2AJ 5 UB-2OP UB-25A 6 UB-25AJ 6 UB-25OP UB-3A 6 UB-3AJ 6 UB-3OP UB-4A 6 UB-4AJ 6 UB-4OP UB-5A 6 UB-5AJ 6 UB-5OP Note: 1. Linear bearing with single sie wiper UB or with ouble sie wiper UB are available Kgf=9.81 N=2.246 Lbf 3. The tolerances state above are vali for the Stanar Close.
5 2-1-1 UBM Series: Metric Dimension Series Use Most Frequently in Europe UBM - * * A ( Stanar Close ) UBM - * * AJ ( Clearance Ajustable ) UBM - * * OP ( Open ) Stanar Close Clearance Ajustable Moel Major Dimensions an Loa Capacity Open D L B D1 h h UBM-12A 6 UBM-12AJ 6 UBM-12OP UBM-16A 6 UBM-16AJ 6 UBM-16OP UBM-2A 6 UBM-2AJ 6 UBM-2OP UBM-25A 8 UBM-25AJ 8 UBM-25OP UBM-3A 8 UBM-3AJ 8 UBM-3OP UBM-4A 8 UBM-4AJ 8 UBM-4OP Note: 1. Linear bearing with single sie wiper UBM or with ouble sie wiper UBM are available Kgf=9.81 N=2.246 Lbf 3. The tolerances state above are vali for the Stanar Close.
6 2-2 Metric Dimension - Japanese Exclusive JB Series: Metric Dimension Series Use Most Frequently in Japan JB - * * A ( Stanar Close ) JB - * * AJ ( Clearance Ajustable ) JB - * * OP ( Open ) Stanar Close Clearance Ajustable Moel Major Dimensions an Loa Capacity Open D L B Precision General D1 h h1 6 JB-6A JB-8A 4 JB-8AJ JB-1A 4 JB-1AJ JB-12A 4 JB-12AJ 4 JB-12OP JB-16A 4 JB-16AJ 4 JB-16OP JB-2A 5 JB-2AJ 5 JB-2OP JB-25A 6 JB-25AJ 6 JB-25OP JB-3A 6 JB-3AJ 6 JB-3OP JB-35A 6 JB-35AJ 6 JB-35OP JB-4A 6 JB-4AJ 6 JB-4OP JB-5A 6 JB-5AJ 6 JB-5OP Note: 1. Linear bearing with single sie wiper JB or with ouble sie wiper JB are available Kgf=9.81 N=2.246 Lbf 3. The tolerances state above are vali for the Stanar Close.
7 2-2-2 JBM Series: Metric Dimension Series Use Most Frequently in Japan JBM - * * A ( Stanar Close ) JBM - * * AJ ( Clearance Ajustable ) JBM - * * OP ( Open ) Stanar Close Moel Major Dimensions an Loa Capacity Clearance Ajustable Open D L B Precision General D1 h h1 1 JBM-1A 6 JBM-1AJ JBM-12A 6 JBM-12AJ 6 JBM-12OP JBM-16A 6 JBM-16AJ 6 JBM-16OP JBM-2A 6 JBM-2AJ 6 JBM-2OP JBM-25A 8 JBM-25AJ 8 JBM-25OP JBM-3A 8 JBM-3AJ 8 JBM-3OP JBM-4A 8 JBM-4AJ 8 JBM-4OP Note: 1. Linear bearing with single sie wiper JBM or with ouble sie wiper JBM are available Kgf=9.81 N=2.246 Lbf 3. The tolerances state above are vali for the Stanar Close.
8 2-2-3 JBL Series: Metric Dimension Series Use Most Frequently in Japan Moel JBL 8 JBL-8A 8 Major Dimensions an D L B D1 Loa Capacity JBL-1A JBL-12A JBL-16A JBL-2A JBL-25A JBL-3A JBL-35A JBL-4A Note: 1. Linear bearing with single sie wiper JBL or with ouble sie wiper JBL are available Kgf=9.81 N=2.246 Lbf
9 2-2-4 JBF&JBK Series: Metric Dimension Series Use Most Frequently in Japan JBF Moel Major Dimensions an Loa Capacity JBK D L -11 Df K t Dp X Y Z Concentricity Perpenicularity 8 JBF-8A JBK-8A ±3 1 JBF-1A JBK-1A JBF-12A JBK-12A JBF-16A JBK-16A JBF-2A JBK-2A JBF-25A JBK-25A JBF-3A JBK-3A JBF-35A JBK-35A JBF-4A JBK-4A Note: 1. Linear bearing with single sie wiper JBF/JBK or with ouble sie wiper JBF/JBK are available Kgf=9.81 N=2.246 Lbf
10 2-2-5 JBFL&JBKLSeries: Metric Dimension Series Use Most Frequently in Japan JBFL Moel Major Dimensions an Loa Capacity JBKL D L Df K t Dp X Y Z Concentricity Perpenicularity Basic Dynamic C() Co() 8 JBFL-8A JBKL-8A ±3 1 JBFL-1A JBKL-1A JBFL-12A JBKL-12A JBFL-16A JBKL-16A JBFL-2A JBKL-2A JBFL-25A JBKL-25A JBFL-3A JBKL-3A JBFL-35A JBKL-35A JBFL-4A JBKL-4A Note: 1. Linear bearing with single sie wiper JBFL/JBKL or with ouble sie wiper JBF/JBK are available Kgf=9.81 N=2.246 Lbf
Linear Bearing. 1. Linear Bearing General Information. 2. Configuration and Specifications. 1-1 Characteristics Description...
Linear Bearing 1. Linear Bearing General Information 1-1 Characteristics... 1 1-2 Description... 1 1-3 Fitting... 2 2. Configuration an Specifications 2-1 Metric Dimensuon 2-1-1 UB Series: Stanar Close,
Linear Bearing CONTENTS
Linear Bearing CONTENTS 1. Characteristics of Linear Bearing.... 2 2. Description... 2 3. Fitting... 3 4. Configuration an Specifications... 5 1. Inch AB Series: Stanar Close type, Clearance Ajustable,
Linear Bearing CONTENTS
B99TE4-112 Lear Bearg CONTENTS 1. Lear Bearg Generial Information Characteristics...1 Description... 1 Fittg... 2 2. Configuration an Specifications 2.1 Inch Dimention AB Series: Stanar Close type, Clearance
Linear Bearing. Technical Information.
Linear Bearing Technical Information www.hiwin.com.tw Linear Bearing 1. HIWIN Linear Bearing General Information 1-1 Characteristics... 1 1-2 Description... 1 1-3 Fitting... 2 2. Configuration and Specifications
Linear Bearing. Technical Information.
Linear Bearing Technical Information www.hiwin.tw INDUSTRIE 4. Best Partner Multi Axis Robot Pick-and-place / Assembly / Array and packaging / Semiconductor / Electro-Optical industry / Automotive industry
Берг АБ Тел. (495) , факс (495)
www.bergab.ru Берг АБ bergab@ya.ru Тел. (495)-228-6-21, факс (495) 223-371 B A B U S H I N G U N I T S www.bergab.ru Берг АБ bergab@ya.ru Тел. (495)-228-6-21, факс (495) 223-371 www.bergab.ru Берг АБ bergab@ya.ru
New Super Metric Ball Bushing * Bearings Technical Bulletin
ew Super Metric all ushing earings Technical ulletin Super Metric all ushing earings igh performance from superior esign: coefficient of friction as low as 0,001. This allows the use of smaller less expensive
STROKE BUSH SLIDE ROTARY BUSH STROKE BUSH
STROKE BUSH STROKE BUSH STRUCTURE AN AVANTAGES E- AOWABE SPEE FOR COMBINE ROTATION AN STROKE MOTION E- RATE OA AN RATE IFE E- FIT E- USE AN HANING PRECAUTIONS E- IMENSION TABE E- SRE SERIES STRUCTURE AN
CATALOG
CATALOG www.jrbearing.cn www.importbearing.ru 1 The contents of this catalog are subjecte to change without prior notice. Every possible effort has been mae to ensure that the ata herein is correct; however,
Triple row axial angular contact ball bearings
Triple row angular contact ball bearings Series DKLF Heavy Series Features Bearings of series DKLF with a bore iameter of 30 mm an 40 mm are available in a Heavy series. This allows the user to achieve
NSK Ball Screws for Standard Stock
NSK Ball s for Stanar Stock ompact Series Next-generation compact ball screws offer quiet, high spee operating performance. stanar stock series assures immeiate elivery. New! Patent Pening BSS Series next-generation
NSK Ball Screws for Standard Stock
www.bergab.ru Берг АБ bergab@ya.ru Тел. (495)-228--21, факс (495) 223-371 NSK Ball s for Stanar Stock ompact Series Next-generation compact ball screws offer quiet, high spee operating performance. stanar
Ø range <500 mm. Ø range >500 mm. Operating conditions. Surface quality. Surface roughness R a R max
Hyraulics Ro Seals Merkel U-Ring T 20 Merkel U-Ring T 20 Merkel U-Ring T 20 PUR profile ring Material range
FULL COMPLEMENT NEEDLE BEARINGS
FULL OMPLEMENT NEELE EARINGS Technical features Full complement neele bearings These bearings are available with or without an inner ring from 12 bore size. Stanar complete bearings type NA have an inner
The Ideal Locking Devices For Shaft-to-Hub Connections. Proven Design. Easy To Use
C-ROM Sizing Software ETP Keyless Shaft Mount Connections The Ieal ocking evices For Shaft-to-Hub Connections. ETP Connections are ieal for positioning an locking shaft components in a system. They are
*内輪/B126-B128/E_*内輪/B126-B128/E 11/05/25 10:07 ページ 127 Inner Rings
Inner Rings Inner Rings Inner Rings Inner Rings Many of the neele roller bearings use a shaft as the irect raceway surface without using inner ring. However, it is recommene to use any of the inner rings
Pressure Relief Valve Overflow Valve Type DHV 715 Type DHV 716 Type DHV 725
Pressure Relief Valve Overflow Valve Type DHV Type DHV Type DHV DIBt* approve DIBt* approve High repeating accuracy, with union sockets or spigot ens Print / The optimal monitoring valves Sizes up to Operating
Angular contact ball bearings
Angular contact ball bearings 7200 BE CB Y HC5 Nomenclature 1 2 3 4 1. esign: 2. Clearance: 3. Cage esigns: B BE A E NR N2 2Z 2RS1 40 contact angle 40 contact angle, high capacity, all ISO corners Conra
E2EM-X4X1 2M * E2EM-X4X2 2M Shielded E2EM-X8X1 2M * E2EM-X8X2 2M. M30 15 mm E2EM-X15C1 2M E2EM-X15C2 2M. M18 16 mm E2EM-X16MX1 2M E2EM-X16MX2 2M
Long-istance Proximity Sensor EEM CSM_EEM_DS_E_6_ Long-istance Proximity Sensor Long-istance etection at up to mm enables secure mounting with reuce problems ue to workpiece collisions. No polarity for
ValueTrac II Linear Ball Bearings and Pillow Blocks- Metric
ValueTrac II Linear Bearings an Pillow Blocks- Metric ValueTrac II Linear Bearings provie you with the following: 3 times more loa capacity than conventional linear bearings...allows you to use smaller,
New Super Metric Ball Bushing * Bearings Technical Bulletin
ew Super Metric all ushing earings Technical ulletin Super Metric all ushing earings igh performance from superior esign: coefficient of friction as low as 0,001. This allows the use of smaller less expensive
Technical features. Cam followers
AM FOLLOWERS Technical features am followers Naella cam followers are esigne to run irectly on various types of surface such as cams, ramps an slieways. In orer to satisfy the operating conitions impose
High-Performance Servo-Worm Reducers Input and Output Couplings for Servo-Worm Reducers 18. Selection and Ratings for Servo-Worm Reducers 19 22
Table of Contents Page High-Performance Servo-Worm Reucers 7 17 Input an Output Couplings for Servo-Worm Reucers 18 Selection an Ratings for Servo-Worm Reucers 19 22 Mounting, Maintenance an Spare Parts
Deep groove ball bearings
Deep groove ball bearings 6200-2 J/C3 HC5 GJN Nomenclature 1 2 3 4 5 1. Seals, shiels & snap rings: 2. Cage esigns: 4. Suffix: RSH RS2 RSL R 2RSH 2RS2 2RSL 2R 2 NR Contact seal of synthetic rubber (NBR)
STROKES: 025, 050, 075, 100, 125, 150, 175, 200mm PNEUMATIC OR HYDRAULIC CYLINDER LIGHTWEIGHT ALUMINUM BODY
ISO 9001 REGISTERE WP4 & 6 SERIES GOL LINE STROKES: 025, 050, 075, 100, 125, 150, 175, 200mm PNEUMATIC OR HYRAULIC CYLINER SHOT PINS WP4 40mm SQUARE RAM SOLI STATE CYLINER SWITCH AVAILALE WITH WP4 70mm
ASV sturdy and robust construction. DN 10 up to DN bar (PN 10) at 20 C. DMV 755: 1,0-9,0 bar DMV 765: 0,5-9,0 bar
Pressure Reucing Valve Type DMV Type DMV Print-No. / Design Size Max. Pressure Setting Range Pressure Setting Working Pressure Back lash Operating Security Maintenance Simple inline pipe connection ASV
SM 3 SM 3G SMS 3 SMS 3G
SM TYPE Standard Type This type is a metric dimension series widely used in Japan and other countries. part number structure example SMS 2 G UU - P specification SM standard SMS anticorrosion inner contact
KUNSTSTOFF-METALL-FORMTEILE CROSSED-ROLLER-SLIM-SPLIT-BEARING. Crossed roller bearing PSX-08. Crossed roller bearing PSX-08 83
CROSSE-ROLLER-SLIM-SPLIT-BEARING Crosse roller bearing PSX-08 Crosse roller bearing PSX-08 83 CROSSE-ROLLER-SLIM-SPLIT-BEARING KUNSTSTOFF-METALL-FORMTEILE escription of shape Crosse roller bearings are
F Load. Load. Load Braga Drive, Broadview, IL t: f: Toll-Free (U.S.A)
naval wire rope isolators: naval polycal efinition series NMP wire rope isolators: naval polycal performance ata series NMP Bar Bar naval polycal isolator from the NMP series D E E materials an finishes
Product Range. Butterfly Valve Type
Prouct Range Butterfly Valve Type 567 ist of Abbreviations ANSI American National Stanar Institute ASTM American Society for Testing an Materials BS British Stanar IN eutsche Inustrie-Normen ISO International
Thrust Needle Roller Bearings Thrust Roller Bearings. Structures of Thrust Bearings. Needle roller. Cage. Cylindrical roller. Cage.
eele Roller Bearins Roller Bearins Structure an Features Bearins consist of a precisely mae cae an rollers They have hih riiity an hih loa capacities an can be use in small spaces eele Roller Bearins incorporate
Linear Ball Bearings, Shafting & Supports Overview
Linear Ball Bearings, ing & Supports Overview Linear Ball Bearings, ing & Supports high performance linear ball bearings, shafting an shaft supports are now available from PTI. Available in Inch an Metric
Product Range. Butterfly Valve Type 567
Prouct Range Butterfly Valve Type 567 Butterfly valves SYGEF SYGEF stanar Butterfly valve type 567 PVF Bare shaft Moel: Ï Connecting imension: ISO 7005 PN 10, EN 1092 PN 10, IN 2501 PN 10, Ï Overall length
ball bearing numbering structure
ball bearing numbering structure The Circular Technologies numbering system utilizes a basic number to ientify the bearing series. A collection of prefix an suffix esignations are use to further efine
Unimaster Dust Collectors Series UMA
Unimaster Dust ollectors Series UM 70-2 require for maintenance Lifting bracket (removable) 20 minimum clearance 80 require for cleaner motor cover removal leane air outlet 102 coustic iffuser (may be
Thomson NEFF Rolled Ball Screws Metric Series
Screws, Ball Screws and Ball Splines Thomson NEFF Rolled Ball Screws Metric Series NEFF Rolled Ball Screw Assemblies are available in a wide range of diameters, leads and nut styles all designed to provide
Data sheet NK10... U DB_EN_NK10_SIL ST4-C 04/17. Fill Level Limiter. Functional security in compliance with DIN EN * *
ata sheet NK10... U0600 09005326 _EN_NK10_SIL ST4-C 04/17 *09005326* Fill Level Limiter Functional security in compliance with IN EN 61508 1 Prouct an functional escription FISCHER Mess- un Regeltechnik
GM (single type) GM-W (double-wide type) GMF-W (round flange double-wide type)
Nippon Bearing has expanded the new generation GM Slide Bush series to now include the popular ouble-ide and Flange Types to provide an even wider selection of products. GM (single type) GM- (double-wide
Other materials are available on request. Operating conditions
Merkel U-Ring T 18 Merkel U-Ring T 18 Asymmetrical sealing lip POM back-up ring PUR profile ring Profile ring Coe Harness Polyurethane 95 AU V142 95 Shore A Fig. 1 Merkel U-Ring T 18 Back-up ring Polyacetal
Variable area flowmeter DFM 165 to 350
ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D60 Vlotho Fon +9 (0) 57 33.7 990 Fax +9 (0) 57 33.7 99 00 www.asvstuebbe.e contact@asvstuebbe.e Variable area flowmeter DFM to 3 For all inustrial uses High
D I S C C O U P L I N G S
DISC COUPINGS DISC COUPINGS MAIN FEATURES The isc coupling is of the continuous ring laminate metallic iaphragm type with blaes in stainless steel. The torque is transmitte in pure tension through alternate
Linear Bushing General Catalog
General Catalog A Technical Descriptions of the Products B Product Specifications (Separate) Features and Types... Features of the... Structure and features... Dedicated Shafts for Model LM... Standard
Edition Selection Guide for Inch Size Ball Bushing Bearings
2003-200 ition Selection Guie for Inch Size all ushing earings 1-800-55-866 www.thomsonballbushing.com Mechanical an lectro-mechanical Prouct Solutions by anaher Motion anaher Motion engineers, manufactures
Information. Plate Cylinder Type C(L)KU32. HIGH type. (Magnetic field resistant auto switch) New. New. New Newly added guide pins
Information Pin lamp yliners ompact yliner Type (L)G32 Magnetic fiel resistant auto switch mounting type LOW type (-X81) HIGH type (-X82) Plate yliner Type (L)U32 Magnetic fiel resistant auto switch mounting
Loop Flushing Valve. Lenntech. Technical Information. Tel Fax
MAKING MODERN LIVING POSSIBLE Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 Revision history Table of revisions Date Change Rev Dec 2014 Danfoss Layout EA Oct 2011
Sine encoders Insulated through hollow shaft ø inch sinewave cycles per turn
Features Rugge esign up to IP 67 protection Shock resistant up to 200 g s Insulating insert to prevent high shaft currents from amaging bearings Wie range voltage supply 4.75...30 VDC Precision 60 arc-secons
Capillary Thermometers according to DIN Nitrogen Filled Option: Contacts
Capillary Thermometers accoring to DIN 16206 Nitrogen Fille Option: Contacts measuring monitoring analysing Environmentally-frienly measuring system with non-toxic nitrogen Fast response time Measuring
5 Bearing Preload and Rigidity
Technology>Precision>Innovation outer ring. 2)The contact surface pressure on the raceway surface reaches 4200Mpa or 428kgf/mm2 in either the inner or outer ring raceway. The allowable axial loa for each
HepcoMotion. Shaft precision steel and aluminium shaft
HepcoMotion Shaft precision steel an aluminium shaft Introucing the HepcoMotion Precision Shaft Correct Shaft selection is vital if maximum performance is to be achieve from your linear system. Hepco Precision
SB4 & SB6 SERIES GOLD LINE SIDE-BY-SIDE SHOT PINS
ISO 9001 REGISTERE SB4 & SB6 SERIES GOL LINE SIE-BY-SIE SHOT PINS CORROSION & WEL SPATTER RESISTANT RAM MOUNTING FOR CYLINICATOR STYLE SWITCHES (NOT INCLUE) NAAMS STANAR MOUNTING NPT or G S LIGHTWEIGHT
Data sheet NK10. Fill Level Limiter DB_EN_NK10 ST4-C 04/17 * *
ata sheet NK10 09005536 _EN_NK10 ST4-C 04/17 *09005536* Fill Level Limiter 1 Prouct an functional escription FISCHER Mess- un Regeltechnik GmH 1 Prouct an functional escription 1.1 elivery scope NK10 accoring
HepcoMotion. Ball Bushings Range.
HepcoMotion Ball Bushings Range www.hepcomotion.com Contents Super Ball Bushing - European Stanar SBE - Super European Close SBEO - Super European Open CS - Super European Pillow Block Close CSO - Super
Linear Bushing. General Catalog A-523
Linear Bushing General Catalog A Technical Descriptions of the Products B Product Specifications (Separate) Features and Types... Features of the Linear Bushing... Structure and features... Dedicated Shafts
bearings (metric series)
Taper roller bearings (metric series) 32302 B J2 / Q CL7C Nomenclature 1 2 3 4 1. Contact angle: 3. Features: B Larger contact angle than standard Q Improved friction torque characteristics and raceway
Ball Screws Inch Series
Ball Screws Inch Series BALL SCREWS Table of Contents Description Page Product Overview................................ 38 Precision Rolled Ball Screws Inch Series......... 42 Visual Product Reference
your reliable partner EAS -Compact K.490.V16.EN
ES -Compact K.490.V16.EN www..com We safeguar the movements of this worl Specialists for power transmission for more than a century mayr power transmission is one of the most traitional an yet most innovative
Radial Insert Ball Bearings Housed Bearing Units
Raial Insert all earings House earing Units Technical rouct Information TI 110 This publication has been prouce with a great eal of care, an all ata have been checke for accuracy. However, no liability
RoundWay Linear Roller Guides #11
RounWay Linear Roller Guies #11 3 13 1 2 4 NW 5 NW 6 8 10 NW NW 7 9 11 12 14 IGST LODS, OST RUGGD, STST SPD ND LRTION RounWay* Linear Roller Guies Offer: Up to twenty times the loa capacity of conventional
2-3 Miniature MGN/MGW Series Features of MGN Series
54 G99TE08-0405 2-3 Miniature MGN/MGW Series 2-3-1 Features of MGN Series 2-3-2 Construction of MGN Series Cap Block End cap End seal Grease nipple Ball Bottom seal Retainer Rolling Circulation System:
60.08 Style 233S Restrained Flexible Coupling For Dynamic Joint Deflection
Style 33S Restraine Flexible Coupling Victaulic Bolte Split-Sleeve Proucts (VBSP) Style 33S stainless steel restraine couplings (formerly Depen-O-Lok FxF Moifie) provie a fully restraine, flexible pipe
Track Rollers/ Cam Followers
Track Rollers/ Cam Followers Page Nomenclature...................................... 460 Introduction....................................... 462 Identification....................................... 462
BALL BEARINGS & STEEL SHAFTS
BA BEARINGS & STEE SHAFTS Every care has been taken to ensure the accuracy of the information containe in this catalogue, but no liability can be accepte for any errors or omissions. We reserve the right
Product Range. The new generation of diaphragm valves
Prouct Range The new generation of iaphragm valves Benefits You can expect a great eal more from the new generation of iaphragm valves: ore safety, simplicity an efficiency. It began with the wish for
Ballscrews. Table of contents
Ballscrews Table of contents 1. Accuracy rade of HIWIN Ballscrews... 1 1-1. International Standard of Accuracy rade for Ballscrews... 1 1-2. Accuracy rade of Precision Ballscrews... 1 1-3. Standard Combination
Incremental encoders Insulated through hollow shaft ø inch pulses per revolution programmable (interpolated system)
Features HS35P with insulate hollow shaft Robust inustrial encoer up to IP 67 protection Highly versatile fully programmable encoer Interchangeable bore size(s) using metal inserts Insulating sleeve to
Ball splines can be configured for an endless number of automated operations. Demystifying Ball Spline Specs
Ball splines can be configured for an endless number of automated operations. Demystifying Ball Spline Specs Place a recirculating-ball bushing on a shaft and what do you get? Frictionless movement of
Models S Regulator
Moels 441-57S Regulator RM-1360 R9 Installation an Maintenance Instructions The is an excellent general purpose gas pressure regulator for larger loas. Use it for natural gas, air, ry CO2, propane, butane,
* * Data sheet NK10... H. Fill Level Limiter. for use in explosive areas Gas explosion protection Zone 1 and 2 Dust explosion zone 21 and 22
ata sheet NK10... H 09005819 _E_NK10_H ST4-C 04/17 *09005819* Fill Level Limiter for use in explosive areas Gas explosion protection Zone 1 an 2 ust explosion zone 21 an 22 1 Prouct an functional escription
DECLARATION OF PERFORMANCE
DECLARATION OF PERFORMANCE Certificate No. 1. Unique ientification of the prouct-type: Lite See table here uner... 2. Type, batch or serial number or any other element allowing ientification of the construction
Product Range. The new generation of diaphragm valves
Prouct Range The new generation of iaphragm valves Benefits You can expect a great eal more from the new generation of iaphragm valves: ore safety, simplicity an efficiency. It began with the wish for
Inventory Article No. Precision mm 0.01mm 35um 386g. Precision A
DIAL INDICATORS Large Range Dial Inicators Unit:mm Stanar No. : GB/T6311-2004 Measuring Grauation Main Dimension Precision Weight Range Value Coe Coe Coe 1014010150 0-50mm 0.01mm 35um 386g DIAL INDICATORS
3. TSUBAKI precision standard ball series. Feature of series. Ball screw
Ball screw 3. TSUBAKI precision standard ball series Feature of series Short delivery TSUBAKI precision standard ball screw is taken enough needs from the machine tool customers, and made as the precision
60.07 Style 233 Restrained Flexible Coupling For Dynamic Joint Deflection
Style 33 Restraine Flexible Coupling For Victaulic Bolte Split-Sleeve Proucts (VBSP) Style 33 carbon steel restraine couplings (formerly Depen-O-Lok FxF Moifie) provie a fully restraine, flexible pipe
FAG Cylindrical Roller Bearings double row
FAG Cylinrical Roller earing Stanar aic eign Tolerance earing clearance Alignment Cage Lubricating groove Speeuitability Heat treatment ouble row cylinrical roller bearing are floating bearing. Their eparability
K-Factor. Global Installation Fittings and K-Factors. Global
K-Factor Global Installation Fittings an K-Factors Global K-Factor CD Table of Contents 5 6 7 8 13 14 21 22 27 28 35 36 37 38 39 40 47 48 49 50 51 52 59 60 61 62 63 64 65 66 67 68 79 80 81 82 83 84 91
Variable Area Flow Meters Type 335, Type 350 Short Version Special Version. Product Range
Prouct Range Variable Area Flow Meters Type 335, Type 350 Short Version Special Version icenta Controls Lt, Unit 3 The Woofor Centre, Lysaner Way, Ol Sarum Park, Salisbury, SP4 6BU, UK Tel: +44 (0)1722
NTN-SNR Linear Motion: Ball Bushings
NTN-SNR Linear Motion: Ball Bushings As one of the leading manufacturers of rolling bearings in Europe, NTN-SNR has been, for many years, among the most innovative companies within its sector of industry.
Industry. SNR : The Bearing Housings
Inustry SNR : The Bearing ousings Contents Page Bearing ousings n Mounting ccessories 2 ousings 3 Bearings 4 Sealing Systems 6 ubrication 8 Bearing Clearance 10 Mounting Tools 12 Bearing rrangement 13
Linear Guideways HG Series
18 G99TE1-67 Linear Guideways 2-1 - Heavy Load Ball Type Linear Guideway HG series linear guideways are designed with load capacity and rigidity higher than other similar products with circular-arc groove
STAINLESS STEEL EXPANSION JOINT, TYPE RFA-S
STAIESS STEEL EXPANSION JOINT, TYPE RFA-S A stainless steel expansion joint with carbon steel flanges for the use in thermal oil pipe systems. For applications where a thermal expansion of the piping has
GF Piping Systems Datasheet Ball Valves
atasheet Type 546 Ball Valve Stanar PVF With butt fusion spigots metric oel: aterial: PVF esigne for easy installation an removal Integrate stainless steel mounting inserts -imension, valve en an union
GF Piping Systems Datasheet Ball Valves
Type 546 Ball Valve PROGEF Stanar With butt fusion spigots IR-Plus oel: aterial: PP- esigne for easy installation an removal Ball seals PTFE Integrate stainless steel mounting inserts z-imension, valve
SB4 & SB6 SERIES GOLD LINE SIDE-BY-SIDE SHOT PINS
ISO 9001 REGISTERED SB4 & SB6 SERIES GOLD LINE SIDE-BY-SIDE SHOT PINS CORROSION & WELD SPATTER RESISTANT MOUNTING FOR CYLINDICATOR STYLE PROX SWITCHES NAAMS STANDARD MOUNTING NPT or G PORTS LIGHTWEIGHT
Declaration of Performance
Declaration of Certificate No. 0004-CPR-140701 1. Unique ientification of the prouct-type: Lite See table hereuner... 2. Type, batch or serial number or any other element allowing ientification of the
The Block Structure. Linear block SBG, SBS, SPG and SPS types are available. All blocks are dimensionally interchangeable.
Circular arc groove Two pint contact structure of circular arc groove. It keeps the function of self-aligning and smooth rolling performance. 45 angle of contact Four rows of circular arc groove contact
DryLin R Linear Plain Bearings, Fast and Quiet
+90º 40º +250º 100º Linear Plain Bearings, Fast and Quiet linear plain bearings, made from solid polymers, are dimensionally equivalent to standard ball bearings. They are made entirely of wear resistant
Shyam Enterprises 5 HEAT EXCHANGERS
Shyam Enterprises HEAT EXCHANGERS 33 Heat Exchangers Introuction The overall heat transfer coefficient of borosilicate glass equipment compare favourably with many alternative process plant construction
Ball and Roller Bearings
Ball an Roller Bearings Ball an Roller Bearings Introuction Business publication Ball an Roller Bearings ZVL - ZKL offers a survey of the basic types an sizes of bearings being prouce an elivere uner
UB4 SERIES GOLD LINE SHOT PIN
ISO 9001 REGISTERED UB4 SERIES GOLD LINE SHOT PIN NPT or G PORTS INTEGRATED PNEUMATIC CYLINDER INTEGRATED WORLD SWITCH LIGHTWEIGHT ALUMINUM BODY SHROUD RAP OR RIGID COUPLER CORROSION & WELD SPATTER RESISTANT
Zylinderrollenlager / Cylindrical Roller Bearings
KIS Antriebstechnik GmbH & Co. KG Martha-Neumann-Str. 12-44263 ortmun Telefon +49 231. 92 71 61 0 Telefax +49 231. 92 71 61 0 info@kis-gmbh.e www.kis-gmbh.e Zylinerrollenlager / Cylinrical Roller earings
UB4 SERIES GOLD LINE SHOT PIN
ISO 9001 REGISTERED UB4 SERIES GOLD LINE SHOT PIN NPT or G PORTS* INTEGRATED PNEUMATIC CYLINDER INTEGRATED WORLD SWITCH* WITH SWITCH GUARD LIGHTWEIGHT ALUMINUM BODY SHROUD* RAP OR RIGID COUPLER* CORROSION
Volute Centrifugal Pumps PN 16 / PN 25 for Heat Transfer Media Thermal Oil up to 350 C Hot Water up to 204 C. Series NTWH/CTWH process model
Volute Centrifugal s PN 16 / PN 25 for Heat Transfer Meia Thermal Oil up to 350 C Hot Water up to 20 C Series NTWH/CTWH process moel Series NTWH/CTWH Series NBWH/CBWH block moel Series NIWH/CIWH in-line
Ultra Series: Crossed Roller Ultra Precision Stages
Ultra Series: Crossed Roller Ultra Precision Stages Bayside Motion Group, has developed Ultra Positioning Stages for applications requiring the ultimate in accuracy. Available with a linear motor, ball
E2ER/E2ERZ. Reduce Failures From Cutting Oil Ingress. Features. Applications. Patent Pending Heat-Sealing Method
Oil-resistant Proximity Sensors Reuce Failures From Cutting Oil Ingress Fluororesin cable withstans cutting oil Sealing metho eliminates gaps at cable joints Resin filling blocks ingress IP67G* egree of
DryLin R Linear Plain Bearings, Fast and Quiet
+90º 40º +250º 100º Linear Plain Bearings, Fast and Quiet linear plain bearings, made from solid polymers, are dimensionally equivalent to standard ball bearings. They are made entirely of wear resistant
Slewing Ring Bearings
Slewing Ring Bearings Wafangian Weiyuan Bearing Manufacturings Co.,Lt. Wafangian Weiyuan Bearing Manufacturings Co.,Lt. A: huhua Inustrial Park,Wafangian,alian,China el:+86-411-85584788 Fax:+86-411-85584896
TuffCam Swing Clamps C-1. Frequently Asked Questions
Frequently Asked Questions C-1 When do you recommend the use of TuffCam Swing Clamps over the standard product? Applications where speed is essential, massive arms are required, or position sensing is
ISO, SAE, DIN, JIS, BS, NF
Balfit Hyraulic Fittings The range of Balfit hyraulic hose connectors is prouce accoring to Balflex specifications an to ISO, SAE, IN, JIS, BS, NF an other stanars. It covers a very wie variety of applications
DryLin R Linear Plain Bearings, Fast and Quiet
+90º 40º +250º 100º Linear Plain Bearings, Fast and Quiet linear plain bearings, made from solid polymers, are dimensionally equivalent to standard ball bearings. They are made entirely of wear resistant
DryLin R Linear Plain Bearings, Fast and Quiet
+90º 40º +250º 100º Linear Plain Bearings, Fast and Quiet linear plain bearings, made from solid polymers, are dimensionally equivalent to standard ball bearings. They are made entirely of wear resistant